Most common failures | No# failures |
---|
Headlamp aim out of alignment | 297 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 180 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 139 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 131 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 116 |
Registration plate issues | 104 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 99 |
Rear reflector on motorcycle missing |1.4.1| | 91 |
Exhaust is leaking and excessively noisey |7.1.1b| | 88 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 70 |
Front shock absorber seal failed and leaking oil |2.3.3| | 60 |
Horn not working |1.7.3a| | 59 |
Front suspension has inadequate damping effect. |2.3.6c| | 57 |
Offside Rear Footrest missing |6.2.1a| | 49 |
Nearside Rear Footrest missing |6.2.1a| | 49 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 46 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 45 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 45 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 43 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 42 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 42 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 42 |
Stop lamp remains on when the brake is released |1.3.1e| | 42 |
Riders seat insecure |6.2.1a| | 41 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 40 |
Rear Footrest missing |6.2.1a| | 38 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 38 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 37 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 36 |
Headlamp aim beam image kick up to the offside |1.6| | 35 |
Front wheel bearings are excessively rough |2.3.5b| | 35 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 34 |
Fuel cap sealing washer missing |7.2.2c| | 34 |
Nearside Handlebar deformed |2.1.1b| | 33 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 32 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 32 |
Front wheel bearings have excessive free play |2.3.5b| | 31 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 29 |
Offside Handlebar deformed |2.1.1b| | 28 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 28 |
Direction indicators not working |1.5.1c| | 27 |
Offside Rear Direction indicator not working |1.5.1c| | 27 |
Nearside Rear Direction indicator not working |1.5.1c| | 26 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 26 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 26 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 26 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 25 |
Offside Footrest insecure |6.2.1a| | 24 |
Offside Front Direction indicator insecure |1.5.3b| | 24 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 23 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 23 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 22 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 22 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 22 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 21 |
Nearside Front Direction indicator not working |1.5.1c| | 21 |
Front mudguard insecure |2.3.7| | 20 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 20 |
Front suspension assembly component excessively bent |2.3.1| | 19 |
Offside Front Footrest insecure |6.2.1a| | 19 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 19 |
Headlamp insecure |1.2.3b| | 19 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 19 |
Offside Steering lock stop ineffective |2.1.3| | 17 |
Horn not loud enough to be heard by another road user |1.7.3a| | 17 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 17 |
Throttle operating incorrectly |6.2.1f| | 16 |
Nearside Front Footrest insecure |6.2.1a| | 16 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 16 |
Steering headbearing has excessive free play |2.2.2| | 16 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 15 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 15 |
Nearside Steering lock stop ineffective |2.1.3| | 15 |
Front Front mudguard insecure |2.3.7| | 14 |
Nearside Rear Direction indicators not working |1.5.1c| | 14 |
Rear wheel rotation likely to be impeded |6.2.1b| | 14 |
Offside Front Footrest missing |6.2.1a| | 14 |
Headlamp aim not tested |1.6| | 14 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 14 |
Offside Rear Direction indicators not working |1.5.1c| | 14 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
An item not tested |Manual| | 13 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 13 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Rear reflector on motorcycle missing |1.4.1| | 12 |
Rear position lamp insecure |1.1.1c| | 12 |
Nearside Footrest insecure |6.2.1a| | 12 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 12 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 12 |
Nearside Front Direction indicator insecure |1.5.3b| | 12 |
Offside Front Direction indicator not working |1.5.1c| | 11 |
Nearside Front Direction indicators not working |1.5.1c| | 11 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 11 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Fuel system component leaking |7.2.1a| | 11 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 11 |
Fairings insecure and likely to impede the steering |2.1.2e| | 11 |
Rear Front mudguard insecure |2.3.7| | 11 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 11 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 10 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 10 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
Nearside Front suspension assembly component excessively bent |2.3.1| | 10 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 10 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 10 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 10 |
Handlebar deformed |2.1.1b| | 10 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 10 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 10 |
Headlamp deteriorated and function impaired |1.2.3a| | 10 |
Nearside Rear Footrest insecure |6.2.1a| | 10 |
Front Front wheel bearings have excessive free play |2.3.5b| | 10 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Direction indicator not working |1.5.1c| | 9 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Front Front wheel bearings are excessively rough |2.3.5b| | 9 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Front Steering headbearing has excessive free play |2.2.2| | 8 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 8 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 8 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 8 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 7 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 7 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 7 |
Offside Rear Direction indicator insecure |1.5.3b| | 7 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Direction indicators not working |1.5.1c| | 7 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 7 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 6 |
Offside Footrest missing |6.2.1a| | 6 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
Front position lamp incorrect colour |1.1.2a| | 6 |
Offside Rear Footrest insecure |6.2.1a| | 6 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 6 |
Brake hose damaged | 6 |
Offside Front Handlebar deformed |2.1.1b| | 6 |
Nearside Rear Direction indicator insecure |1.5.3b| | 6 |
Rear Direction indicators not working |1.5.1c| | 6 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 6 |
Fuel hose leaking |7.2.1a| | 6 |
Front Horn not working |1.7.3a| | 6 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 6 |
Rear Brake pipe inadequately supported |3.2.B2b| | 6 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 6 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |
Exhaust excessively deteriorated |7.1.1a| | 6 |
Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
Offside Front Direction indicators not working |1.5.1c| | 6 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |