MOT History from tests of petrol GILERA COUGARs year 2000

Review the list of common GILERA COUGAR failures below or to perform a specific mot history check on your GILERA then use our popular KnowYourCar service

mot history

Pass percent:57.96%

(The average a petrol GILERA COUGAR year 2000 passes without issue)

Based on:1,225 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	84
Drive chain excessively loose \|6.2.1d\|	56
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	56
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	40
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	39
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	39
Drive chain worn to excess \|6.2.1e\|	32
Rear Drive chain sprocket worn to excess \|6.2.1e\|	32
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	31
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	30
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	30
Riders seat insecure \|6.2.1a\|	26
Registration plate issues	24
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	19
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	19
Front wheel bearings have excessive free play \|2.3.5b\|	17
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	15
Handlebar mounting clamp loose \|2.1.1a\|	14
Rear reflector on motorcycle missing \|1.4.1\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Horn not working \|1.7.3a\|	13
Front wheel bearings are excessively rough \|2.3.5b\|	13
Headlamp aim beam image kick up to the offside \|1.6\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Handlebar mounting clamp bolt loose \|2.1.1a\|	12
Rear Drive chain excessively loose \|6.2.1d\|	12
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	11
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Front Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	10
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	9
Drive chain excessively tight \|6.2.1d\|	9
Exhaust is leaking and excessively noisey \|7.1.1b\|	9
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	9
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	9
Rear Wheel spoke cracked. \|4.2.1b\|	9
Front Wheel spoke excessively loose \|4.2.1b\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	7
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Rear Wheel spoke excessively loose \|4.2.1b\|	7
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	7
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	7
Offside Rear Direction indicators not working \|1.5.1c\|	7
Front Front wheel bearings have excessive free play \|2.3.5b\|	7
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	6
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Registration plate lamp issues	6
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	6
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	6
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	5
Headlamp aim not tested \|1.6\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
An item not tested \|Manual\|	4
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Headlamp insecure \|1.2.3b\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Rear Direction indicator not working \|1.5.1c\|	4
Front Brake excessively binding (1.2.1 (f))	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Offside Rear Direction indicator insecure \|1.5.3b\|	4
Handlebar deformed \|2.1.1b\|	4
Front Drive chain sprocket worn to excess \|6.2.1e\|	4
Front suspension has inadequate damping effect. \|2.3.6c\|	4
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	4
Direction indicators not working \|1.5.1c\|	4
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	4
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4
Rear Wheel spoke missing \|4.2.1b\|	4
Offside Front Direction indicator not working \|1.5.1c\|	4
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Steering headbearing has excessive free play \|2.2.2\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	3
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	3
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Front Riders seat insecure \|6.2.1a\|	3
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear Position lamp not working (4.2.1 (a))	3
Rear position lamp insecure \|1.1.1c\|	3
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	3
Front Handlebar mounting clamp loose \|2.1.1a\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))	2
Front Brake lever is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Front Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Central Rear Position lamp not working \|4.2.1 \|a\|\|	2
Fuel tank insecure (6.1.3 (a) (i))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front suspension assembly component excessively corroded. \|2.3.1\|	2
Hydraulic brake control feels spongy \|3.1.4a\|	2
Fuel hose leaking \|7.2.1a\|	2
Nearside Rear Drive chain excessively loose \|6.2.1d\|	2
Offside Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Front Front mudguard insecure \|2.3.7\|	2
Rear Footrest missing \|6.2.1a\|	2
Steering lock stop ineffective \|2.1.3\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Drive chain worn to excess (6.1.7 (c) (i))	2
Front Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Seat insecure \|6.2.1a\|	2
Front Headlamp insecure \|1.2.3b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Rear Wheel has an excessively eccentric bead rim. \|4.2.2\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Drive chain sprocket worn to excess \|6.2.1e\|	2
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Rear Wheel spoke excessively bent \|4.2.1b\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Hydraulic brake control creeps under load. \|3.1.4a\|	2
Nearside Rear Footrest insecure \|6.2.1a\|	2
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear position lamp flickers when tapped lightly by hand \|1.1.3c\|	2
Front Stop lamp damaged and function impaired \|1.3.3a\|	2
Headlamp insecure \|4.1.1 \|c\|\|	2
Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	2
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Nearside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Front Brake lever cannot be released smoothly \|3.1.3d\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	84
Drive chain excessively loose \|6.2.1d\|	56
Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	56
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	40
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	39
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	39
Drive chain worn to excess \|6.2.1e\|	32
Rear Drive chain sprocket worn to excess \|6.2.1e\|	32
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	31
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	30
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	30
Riders seat insecure \|6.2.1a\|	26
Registration plate issues	24
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	19
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	19
Front wheel bearings have excessive free play \|2.3.5b\|	17
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	15
Handlebar mounting clamp loose \|2.1.1a\|	14
Rear reflector on motorcycle missing \|1.4.1\|	14
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	13
Horn not working \|1.7.3a\|	13
Front wheel bearings are excessively rough \|2.3.5b\|	13
Headlamp aim beam image kick up to the offside \|1.6\|	13
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	13
Handlebar mounting clamp bolt loose \|2.1.1a\|	12
Rear Drive chain excessively loose \|6.2.1d\|	12
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	11
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	10
Nearside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	10
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Front Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	10
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	9
Drive chain excessively tight \|6.2.1d\|	9
Exhaust is leaking and excessively noisey \|7.1.1b\|	9
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	9
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	9
Rear Wheel spoke cracked. \|4.2.1b\|	9
Front Wheel spoke excessively loose \|4.2.1b\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	7
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	7
Rear Wheel spoke excessively loose \|4.2.1b\|	7
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	7
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	7
Offside Rear Direction indicators not working \|1.5.1c\|	7
Front Front wheel bearings have excessive free play \|2.3.5b\|	7
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	6
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Registration plate lamp issues	6
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	6
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	6
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	6
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	5
Headlamp aim not tested \|1.6\|	5
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	5
Offside Front Direction indicators not working \|1.5.1c\|	5
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
An item not tested \|Manual\|	4
Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	4
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	4
Headlamp insecure \|1.2.3b\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Front Front wheel bearings are excessively rough \|2.3.5b\|	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Offside Rear Direction indicator not working \|1.5.1c\|	4
Front Brake excessively binding (1.2.1 (f))	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Offside Rear Direction indicator insecure \|1.5.3b\|	4
Handlebar deformed \|2.1.1b\|	4
Front Drive chain sprocket worn to excess \|6.2.1e\|	4
Front suspension has inadequate damping effect. \|2.3.6c\|	4
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	4
Direction indicators not working \|1.5.1c\|	4
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Nearside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	4
Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	4
Rear Wheel spoke missing \|4.2.1b\|	4
Offside Front Direction indicator not working \|1.5.1c\|	4
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Steering headbearing has excessive free play \|2.2.2\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))	3
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	3
Offside Steering lock stop ineffective \|2.1.3\|	3
Front Brake lever has inadequate reserve travel \|3.1.3b\|	3
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	3
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	3
Front Riders seat insecure \|6.2.1a\|	3
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear Position lamp not working (4.2.1 (a))	3
Rear position lamp insecure \|1.1.1c\|	3
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Clutch lever shortened so it cannot be readily operated. \|6.2.1g\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	3
Front Handlebar mounting clamp loose \|2.1.1a\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	3
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))	2
Front Brake lever is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Front Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Central Rear Position lamp not working \|4.2.1 \|a\|\|	2
Fuel tank insecure (6.1.3 (a) (i))	2
Riders seat insecure (6.2.5 (a) (ii))	2
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	2
Front suspension assembly component excessively corroded. \|2.3.1\|	2
Hydraulic brake control feels spongy \|3.1.4a\|	2
Fuel hose leaking \|7.2.1a\|	2
Nearside Rear Drive chain excessively loose \|6.2.1d\|	2
Offside Front Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	2
Front Front mudguard insecure \|2.3.7\|	2
Rear Footrest missing \|6.2.1a\|	2
Steering lock stop ineffective \|2.1.3\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Drive chain worn to excess (6.1.7 (c) (i))	2
Front Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Seat insecure \|6.2.1a\|	2
Front Headlamp insecure \|1.2.3b\|	2
Nearside Front Direction indicators not working \|1.5.1c\|	2
Nearside Rear Direction indicators not working \|1.5.1c\|	2
Rear Wheel has an excessively eccentric bead rim. \|4.2.2\|	2
Rear reflector missing (4.8.2 (a) (ii))	2
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	2
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	2
Drive chain sprocket worn to excess \|6.2.1e\|	2
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Rear Wheel spoke excessively bent \|4.2.1b\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Hydraulic brake control creeps under load. \|3.1.4a\|	2
Nearside Rear Footrest insecure \|6.2.1a\|	2
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Fuel tank leaking \|7.2.1a\|	2
Rear position lamp flickers when tapped lightly by hand \|1.1.3c\|	2
Front Stop lamp damaged and function impaired \|1.3.3a\|	2
Headlamp insecure \|4.1.1 \|c\|\|	2
Headlamp aim so that beam "kick up" is not visible on the screen \|4.1.2 \|a\|\|	2
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	2
Nearside Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Front Brake lever cannot be released smoothly \|3.1.3d\|	2
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2

MOT History from tests of petrol GILERA COUGARs year 2000

Find us on Facebook