MOT History from tests of petrol GIANTCO SPRINTs year 2010

Review the list of common GIANTCO SPRINT failures below or to perform a specific mot history check on your GIANTCO then use our popular KnowYourCar service

mot history

Pass percent:55.81%

(The average a petrol GIANTCO SPRINT year 2010 passes without issue)

Based on:43 MOT Tests

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Front Brake excessively binding (1.2.1 (f))	1
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Direction indicator incorrect colour \|1.5.1b\|	1
Headlamp insecure \|1.2.3b\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim out of alignment	2
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear suspension bush excessively deteriorated \|2.4.A2a\|i\|\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Front Brake excessively binding (1.2.1 (f))	1
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	1
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	1
All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|1.7.3a\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Front Stop lamp remains on when the brake is released \|1.3.1e\|	1
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Direction indicator incorrect colour \|1.5.1b\|	1
Headlamp insecure \|1.2.3b\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Brake caliper\|s\| insecure \|3.2.A1j\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Rear reflector on motorcycle obscured \|1.4.1\|	1

MOT History from tests of petrol GIANTCO SPRINTs year 2010

Find us on Facebook