Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Horn not working |1.7.3a| | 6 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Registration plate issues | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Brake lever insecure |3.1.2a| | 2 |
Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Registration plate lamp issues | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake cable excessively worn (1.1.15 (b)) | 1 |
Front Brake caliper excessively weakened by corrosion (1.1.16 (d) (i)) | 1 |
Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Gradient brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension has severe distortion of a load bearing member or its supporting structure. engine/rear suspension mount has excessive wear on bushes |2.4.A.2d| | 1 |
Brake performance not tested |3.3| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Motorcycle structure adversely modified Engine case bolts missing |6.1.1b| | 1 |
Rear wheel rotation likely to be impeded wheel hugger |6.2.1b| | 1 |
Motorcycle structure excessively damaged Front mudguard loose |6.1.1a| | 1 |
Roller brake test indicates excessive fluctuation of brake effort rear shoes need replacing |3.3.A1d| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Direction indicators flashing less than 60 times a minute both indicators do not flash |1.5.1c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid cap sellotaped on |3.2.B1e| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies both levers |1.3.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp aim headlamp deteriorated and function impaired dip beam fitted incorrectly |1.2.3a| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Indicator switch defective |1.5.4| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |