| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 78359 |
| Brake pipe excessively corroded | 51790 |
| Headlamp aim out of alignment | 49349 |
| Windscreen wiper does not clear the windscreen effectively | 40797 |
| Parking brake: efficiency below requirements |3.7.B.7| | 23527 |
| Brakes imbalanced across an axle | 21463 |
| Horn not working |1.6.2a| | 16297 |
| Service brake: efficiency below requirements |3.7.B.7| | 16041 |
| Offside Rear fog lamp not working |1.3.2b| | 13637 |
| Windscreen has damage | 11462 |
| Nearside Stop lamp not working |1.2.1b| | 11362 |
| Offside Stop lamp not working |1.2.1b| | 11174 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 10290 |
| Rear parking brake recording little or no effort | 10221 |
| Registration plate issues | 10157 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 9107 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 8854 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 8487 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8482 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 7884 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 7746 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 7666 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 7083 |
| Front brake disc in such a condition that it is seriously weakened | 6965 |
| Parking brake lever has no reserve travel |3.1.6b| | 6910 |
| Rear brake application uneven | 6397 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6101 |
| Rear brake binding | 5558 |
| Front brake application uneven | 5249 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5114 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 4833 |
| Nearside Rear Stop lamp not working |1.2.1b| | 4409 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 4370 |
| Offside Rear Stop lamp not working |1.2.1b| | 4228 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 4161 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 4081 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 4064 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3913 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3804 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3781 |
| Brake load sensing valve linkage seized |3.6.E.3| | 3661 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3597 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 3547 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 3429 |
| Driver`s seat insecure |6.2.A.1| | 3389 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3277 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3146 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2869 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2824 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2782 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2719 |
| Brake load sensing valve seized |3.6.E.3| | 2714 |
| Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 2711 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2696 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2684 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2673 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2668 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2578 |
| Fuel system component leaking |7.2.3| | 2559 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 2487 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 2433 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2393 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2293 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2290 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2204 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2150 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 2148 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2020 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1984 |
| Rear fog lamp not working |1.3.2b| | 1980 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1895 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1870 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1837 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1673 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1652 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1607 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1586 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1573 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1538 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1530 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1493 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1482 |
| Windscreen wiper blade insecure | 1478 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1456 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1449 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1439 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1433 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1424 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1403 |
| front brakes release unevenly |3.7.B.4| | 1396 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1393 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1392 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1368 |
| Offside Headlamp not working on main beam |1.7.5a| | 1362 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1317 |
| Nearside Obligatory mirror missing |8.1.1| | 1292 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1286 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1285 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1273 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1264 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1263 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1253 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1251 |
| Offside front brake binding |3.7.B.1| | 1249 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1244 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1234 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1233 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1230 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1221 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1213 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1213 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1202 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1200 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1183 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1181 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1178 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1138 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1133 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1130 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1120 |
| Hazard warning switch faulty |1.4.B.1d| | 1114 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1103 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1093 |
| Power steering fluid level below minimum |2.3.1| | 1084 |
| Emissions not tested |7.0| | 1063 |
| Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1041 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1039 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1016 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1015 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 989 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 978 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 978 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 972 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 968 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 962 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 928 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 925 |
| Nearside Rear Anti-roll bar linkage insecure |2.4.G.1| | 920 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 919 |
| Rear Exhaust system not adequately supported |7.1.1| | 918 |
| Nearside front brake binding |3.7.B.1| | 909 |
| Offside Rear Leaf spring fractured |2.4.B.1a| | 890 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 875 |
| Offside Rear Anti-roll bar linkage insecure |2.4.G.1| | 866 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 860 |
| Stop lamp not working |1.2.1b| | 856 |
| Rear fog lamp tell tale not working |1.3.1b| | 851 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 846 |
| An item not tested |Manual| | 838 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 835 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 833 |
| Offside Obligatory mirror missing |8.1.1| | 796 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 792 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 786 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 778 |
| Fuel tank insecure |7.2.1| | 774 |
| Nearside Side repeater not working |1.4.A.2c| | 770 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 767 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 727 |
| Rear Brake load sensing valve seized |3.6.E.3| | 726 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 715 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 713 |
| Windscreen washer not working | 708 |
| Power steering component|s| leaking |2.3.3b| | 705 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 705 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 701 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 694 |
| Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 691 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 691 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 686 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 680 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 679 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 674 |
| Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 674 |
| Nearside Rear Leaf spring fractured |2.4.B.1a| | 670 |
| rear brakes release unevenly |3.7.B.4| | 667 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 666 |
| Rear Stop lamp not working |1.2.1b| | 663 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 661 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 657 |
| Rear Mechanical brake component has restricted free movement | 649 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 648 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 639 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 623 |
| Offside Front brake disc excessively pitted |3.5.1h| | 615 |
| Exhaust system not adequately supported |7.1.1| | 613 |
| Horn not working (7.7 (a) (ii)) | 606 |
| Offside Front front brake binding |3.7.B.1| | 596 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 592 |
| Offside Side repeater not working |1.4.A.2c| | 576 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 566 |
| Power steering pipe|s| or hose|s| leaking |2.3.3b| | 564 |
| Horn not working |7.7 |a| |ii|| | 559 |
| Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 551 |
| Anti-lock braking system warning lamp indicates an ABS fault | 551 |
| Fuel cap/sealing device missing |7.2.4a| | 550 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 548 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 548 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 544 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 542 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 540 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 539 |
| Front position lamp|s| not working |1.1.A.3b| | 538 |
| Front brake excessively fluctuating | 536 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 536 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 536 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 532 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 531 |
| All position lamps not working |1.1.A.3b| | 528 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 528 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 515 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 513 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 503 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 502 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 501 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 490 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 482 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 482 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 478 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 475 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 473 |
| Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 473 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 471 |
| Offside Front coil spring fractured |2.4.C.1a| | 465 |
| Rear Rear fog lamp not working |1.3.2b| | 465 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 462 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 460 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 460 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 457 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 451 |
| Nearside Rear Braking system leaking |3.6.A.1| | 450 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 444 |
| Brake hose has insufficient room to move | 439 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 435 |
| Nearside Obligatory mirror insecure |8.1.1| | 435 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 434 |
| Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 433 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 432 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 431 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 429 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 429 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 425 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 425 |
| Nearside Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 422 |
| Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 421 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 420 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 420 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 417 |
| Offside Front brake disc excessively scored |3.5.1h| | 417 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 415 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 415 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 414 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 411 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 409 |
| Nearside Front front brake binding |3.7.B.1| | 409 |
| Offside Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 409 |
| Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 407 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 406 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 406 |
| Brake performance not tested |3.7.A.1| | 405 |
| Front Fuel system component leaking |7.2.3| | 404 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 399 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 399 |
| Bonnet cannot be secured in the closed position |8.4.1| | 395 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 395 |
| Offside Steering rack gaiter split |2.2.D.2d| | 394 |
| Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 394 |
| Offside Front coil spring broken |2.4.C.1a| | 394 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 385 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 385 |
| Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 384 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 383 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 380 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 379 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 378 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 376 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 375 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 374 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 371 |
| Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 368 |
| Nearside Front coil spring fractured |2.4.C.1a| | 366 |
| Mechanical brake component has restricted free movement | 365 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 363 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 362 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 360 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 360 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 359 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 359 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 356 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 354 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 351 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 350 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 349 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 348 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 346 |
| Horn not working (7.7 (a)) | 345 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 344 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 342 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 341 |
| Brake valve leaking |3.6.A.1| | 341 |
| Brake hose excessively deteriorated | 338 |
| Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 337 |
| Nearside Front coil spring broken |2.4.C.1a| | 336 |
| Offside Obligatory mirror insecure |8.1.1| | 333 |
| Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 330 |
| Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 330 |
| Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 329 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 327 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 326 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 325 |
| rear parking |secondary| brakes imbalanced | 325 |
| Nearside Front Obligatory mirror missing |8.1.1| | 325 |
| Offside Upper Front position lamp|s| not working |1.1.A.3b| | 324 |
| Nearside Upper Front position lamp|s| not working |1.1.A.3b| | 323 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 322 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 322 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 321 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 320 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 320 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 319 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 316 |
| Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 315 |
| Hazard warning lamps inoperative |1.4.B.1b| | 312 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 311 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 309 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 309 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 308 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 305 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 304 |
| Nearside Front All position lamps not working |1.1.A.3b| | 304 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 304 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 304 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 304 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 303 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 303 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 301 |
| Offside front brake juddering severely |3.7.A.2b| | 300 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 297 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 296 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 295 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 293 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 291 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 290 |
| Offside Rear Leaf spring cracked |2.4.B.1a| | 289 |
| Offside front brakes release unevenly |3.7.B.4| | 288 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 287 |
| Power steering malfunctioning |2.3.3a| | 286 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 285 |
| Fuel system component insecure |7.2.1| | 285 |
| Nearside Front Upper Front position lamp|s| not working |1.1.A.3b| | 285 |
| Nearside Front Side repeater not working |1.4.A.2c| | 284 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 282 |
| Parking brake: efficiency below requirements |3.7.D.4| | 282 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 281 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 278 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 278 |
| Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 277 |
| Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 277 |
| Nearside Front brake disc excessively scored |3.5.1h| | 277 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 276 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 275 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 275 |
| Front brake disc excessively pitted |3.5.1h| | 274 |
| Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 273 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 271 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 270 |
| Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 270 |
| Stop lamp remains on when the brakes are released | 269 |
| Offside Front Upper Front position lamp|s| not working |1.1.A.3b| | 268 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 268 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 267 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 267 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 266 |
| Bonnet retaining device ineffective |8.4.2| | 264 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 263 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 262 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 262 |
| Offside Rear Shock absorbers has a serious fluid leak | 259 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 259 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 259 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 259 |
| Nearside Rear fog lamp emits a light other than red |1.3.2e| | 258 |
| Offside Front Obligatory mirror missing |8.1.1| | 258 |
| Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 257 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 257 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 257 |
| Offside Rear position lamp|s| incomplete |1.1.4a| | 256 |
| Rear Brake valve leaking |3.6.A.1| | 255 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 254 |
| Offside Rear Braking system leaking |3.6.A.1| | 252 |
| Nearside front brake juddering severely |3.7.A.2b| | 252 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 251 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 250 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 250 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 249 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 249 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 248 |
| Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 247 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 245 |
| rear brake recording little or no effort |3.7.B.5a| | 244 |
| Front Horn not working |1.6.2a| | 244 |
| Nearside front brakes release unevenly |3.7.B.4| | 243 |
| Nearside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 243 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 239 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 239 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 239 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 238 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 236 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 236 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 236 |
| Offside Front All position lamps not working |1.1.A.3b| | 235 |
| Nearside Rear Shock absorbers has a serious fluid leak | 234 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 234 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 233 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 233 |
| Offside Front Position lamp not working |4.2.1 |a|| | 232 |
| Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 232 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 231 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 231 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 229 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 229 |
| Offside Front Seat belt stitching badly frayed |5.2.2b| | 228 |
| Nearside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 228 |
| Front Front position lamp|s| not working |1.1.A.3b| | 228 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 228 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 228 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 228 |
| Offside Front Direction indicator not working |1.4.A.2c| | 226 |
| Direction indicators not working |1.4.A.2c| | 226 |
| Centre Statutory seat belt missing |5.1.1| | 224 |
| Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 224 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 224 |
| Horn sounds harsh or grating |1.6.2e| | 223 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 222 |
| Brake pedal spongy |3.3.B.1b| | 222 |
| Offside Front coil spring incomplete |2.4.C.1a| | 222 |
| Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 221 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 220 |
| Nearside Suspension arm has excessive play in a ball joint |2.4.G.2| | 220 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 220 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 220 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 219 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 218 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 217 |
| Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 217 |
| Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 216 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 216 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 216 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 215 |
| Nearside Ball joint has excessive play |2.2.B.1f| | 214 |
| Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 214 |
| Nearside Rear wheel cylinder leaking |3.6.A.1| | 213 |
| Offside Front Side repeater not working |1.4.A.2c| | 213 |
| Rear Parking brake lever has no reserve travel |3.1.6b| | 213 |
| Nearside Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 213 |
| Offside Suspension arm has excessive play in a ball joint |2.4.G.2| | 211 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 211 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 211 |
| Offside Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 211 |
| Nearside Side repeater missing |1.4.A.2b| | 211 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 210 |
| Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 209 |
| Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 207 |
| Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 207 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 207 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 206 |
| Battery insecure |1.9.1| | 206 |
| Power steering inoperative |2.3.3a| | 205 |
| Nearside Rear Leaf spring eye defective |anchor| |2.4.B.1b| | 204 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 204 |
| Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 202 |
| Offside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 202 |
| Nearside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 202 |
| Trailer electrical socket insecure |1.9.3a| | 201 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 201 |
| Nearside Rear Leaf spring cracked |2.4.B.1a| | 201 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 201 |
| Nearside Rear brake drum contaminated by oil |3.5.1h| | 200 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 200 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 199 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 199 |
| Offside Front Brake pipe leaking |3.6.A.1| | 197 |
| Brake pipe inadequately clipped |3.6.B.1| | 197 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 196 |
| Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 196 |
| Offside Rear Leaf spring eye defective |anchor| |2.4.B.1b| | 195 |
| Nearside All position lamps not working |1.1.A.3b| | 195 |
| Braking system leaking |3.6.A.1| | 195 |
| Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 195 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 194 |
| Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 194 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 193 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 192 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 191 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 190 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 189 |
| Track rod end ball joint has excessive play |2.2.B.1f| | 189 |
| Nearside Front Body has a projection caused by damage |6.1.C.1| | 189 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 188 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 187 |
| Offside rear brake excessively fluctuating |3.7.B.3| | 187 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 187 |
| Fuel tank leaking |7.2.3| | 186 |
| Fuel pipe leaking |7.2.3| | 186 |
| Brake hose damaged | 186 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 185 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 185 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 184 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 184 |
| Offside Front Seat belt affected by an insecure seat fixing |5.2.1b| | 184 |
| Offside Front Body insecure and dangerous to other road users |6.1.B.1b| | 183 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 183 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 182 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 182 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 181 |
| Offside Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 180 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 180 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 180 |
| Nearside rear brake excessively fluctuating |3.7.B.3| | 180 |
| Offside rear brake grabbing severely |3.7.A.5b| | 180 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 179 |
| Offside Headlamp aim not tested |1.8.A.1c| | 179 |
| Offside Front Braking system leaking |3.6.A.1| | 179 |
| Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 178 |
| Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 178 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 178 |
| Offside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 178 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 177 |
| Power steering pump leaking from a failed component |2.3.3b| | 176 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 175 |
| Offside Stop lamp emits other than a steady red light |1.2.1e| | 174 |
| Offside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 174 |
| Brake load sensing valve inoperative |3.6.E.3| | 174 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 173 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 172 |
| Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 171 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 170 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 170 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 170 |
| Offside Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 170 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 170 |
| Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 169 |
| Nearside Rear Brake cable has restricted free movement |3.5.1k| | 169 |
| Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 168 |
| Rear Loading door cannot be secured in the closed position |6.4.1| | 168 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 168 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 168 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 168 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 168 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 167 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 166 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 166 |
| Offside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 166 |
| Offside All position lamps not working |1.1.A.3b| | 166 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 166 |
| Nearside Stop lamp emits other than a steady red light |1.2.1e| | 165 |
| Nearside Front Braking system leaking |3.6.A.1| | 164 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 164 |
| Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 163 |
| Service brake: efficiency below requirements |3.7.D.4| | 163 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 163 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 163 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 163 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 162 |
| Nearside Rear Rear position lamp|s| incomplete |1.1.4a| | 162 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 162 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 162 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 162 |
| Nearside Rear All position lamps not working |1.1.A.3b| | 162 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 161 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 161 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 161 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 160 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 160 |
| Central Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 160 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 159 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 159 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 159 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 158 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 157 |
| Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 157 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 157 |
| Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 156 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 156 |
| Front Track rod end ball joint has excessive play |2.2.B.1f| | 156 |
| Centre Exhaust system not adequately supported |7.1.1| | 155 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 155 |
| Rear Shock absorber has a serious fluid leak |2.7.3| | 155 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 155 |
| Steering system excessively rough |2.2.D.1| | 154 |
| Offside Rear All position lamps not working |1.1.A.3b| | 154 |
| Brake pedal anti-slip provision loose |3.3.A.1b| | 154 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 154 |
| Body has a sharp edge caused by damage |6.1.C.1| | 154 |
| brake disc in such a condition that it is seriously weakened |3.5.1i| | 153 |
| Offside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 153 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 153 |
| Nearside Front Brake pipe leaking |3.6.A.1| | 153 |
| Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 153 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 153 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 152 |
| Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 152 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 150 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 150 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 150 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 150 |
| Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 150 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine |8.2.2.2 |b|| | 150 |
| Nearside Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 150 |
| Nearside Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 149 |
| Nearside Obligatory mirror does not provide a view to the rear |8.1.2b| | 149 |
| Offside Ball joint has excessive play |2.2.B.1f| | 149 |
| Offside Driver`s seat insecure |6.2.A.1| | 149 |
| Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 148 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 147 |
| Front brake disc excessively scored |3.5.1h| | 147 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 146 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 146 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 145 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 145 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 144 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 144 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 144 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 143 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 142 |
| Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 142 |
| Offside rear brake juddering severely |3.7.A.5b| | 142 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 141 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 141 |
| Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 141 |
| Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 141 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 140 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 140 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 139 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 139 |
| Offside Rear Brake cable has restricted free movement |3.5.1k| | 139 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 139 |
| Nearside rear brake juddering severely |3.7.A.5b| | 139 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 139 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 138 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 138 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 138 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 137 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 137 |
| Nearside Rear fog lamp not working |1.3.2b| | 137 |
| Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 137 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 137 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 136 |
| Centre Front Statutory seat belt missing |5.1.1| | 136 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 136 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 136 |
| Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 136 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 136 |
| Offside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 135 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 135 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 135 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 135 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 135 |
| Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 135 |
| Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 135 |
| All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 135 |
| Rear Brake cable insecure | 134 |
| Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 134 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 134 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 134 |
| Offside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 134 |
| Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 133 |
| Towbar component insecure |6.6.1| | 133 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 133 |
| Offside Side repeater missing |1.4.A.2b| | 132 |
| Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 132 |
| Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 132 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 132 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 132 |
| Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 131 |
| Bonnet retaining device excessively deteriorated |8.4.2| | 131 |
| Offside Front front brakes release unevenly |3.7.B.4| | 131 |
| Power steering component|s| leaking from a failed seal |2.3.3b| | 131 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 130 |
| Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 130 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 129 |
| Rear passenger door does not latch securely closed |6.2.B.1a| | 129 |
| Nearside Rear Brake load sensing valve seized |3.6.E.3| | 128 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 128 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 128 |
| Nearside Rear Stop lamp emits other than a steady red light |1.2.1e| | 127 |
| Offside Rear brake drum contaminated by oil |3.5.1h| | 127 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 127 |
| Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 127 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 127 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 126 |
| Front Body insecure and dangerous to other road users |6.1.B.1b| | 126 |
| Front front brakes release unevenly |3.7.B.4| | 125 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 125 |
| Offside Front Obligatory mirror insecure |8.1.1| | 125 |
| Nearside Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 125 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 124 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 124 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 124 |
| Offside Front Body has a projection caused by damage |6.1.C.1| | 124 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 124 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 124 |
| Offside Rear Statutory seat belt missing |5.1.1| | 123 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 123 |
| Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 123 |
| Brake pipe inadequately supported |3.6.B.1| | 123 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 123 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 122 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 122 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 121 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 121 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 121 |
| Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 121 |
| Offside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 121 |
| Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 121 |
| Nearside Rear Direction indicator incomplete |1.5.A1b| | 120 |
| Brake fluid warning lamp inoperative |3.6.G.2| | 120 |
| Power steering pump leaking from a failed seal |2.3.3b| | 120 |
| Nearside Rear Statutory seat belt missing |5.1.1| | 119 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 119 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 119 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 118 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 118 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 118 |
| Nearside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 118 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 117 |
| Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 117 |
| Rear position lamp|s| not working |1.1.A.3b| | 117 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 117 |
| Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 117 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 116 |
| Nearside Rear An item not tested |Manual| | 116 |
| Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 116 |
| Nearside Rear Rear fog lamp not working |1.3.2b| | 116 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 116 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 115 |
| Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 115 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 115 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 115 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 114 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 114 |
| Offside Rear wheel cylinder leaking |3.6.A.1| | 114 |
| Nearside Front Obligatory mirror insecure |8.1.1| | 114 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 113 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 113 |
| Nearside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 113 |
| Rear Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 113 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 113 |
| Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 112 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 112 |
| Nearside Seat belt retracting mechanism defective |5.2.5b| | 112 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 112 |
| Nearside Front Seat belt stitching badly frayed |5.2.2b| | 112 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 112 |
| Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 111 |
| Headlamp aim not tested |1.8.A.1c| | 111 |
| Offside Steering arm has relative movement at its fixings |2.2.B.1h| | 111 |
| Offside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 111 |
| Offside Rear Direction indicator incomplete |1.5.A1b| | 110 |
| Offside front brake recording little or no effort |3.7.B.5a| | 110 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 110 |
| Nearside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 110 |
| Nearside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 110 |
| Offside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 110 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 110 |
| Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 109 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 109 |
| Horn not a continuous or uniform sound |1.6.2e| | 109 |
| Nearside Headlamp insecure |1.7.3| | 109 |
| Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 109 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 108 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 108 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 107 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 107 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 107 |
| Front Exhaust system not adequately supported |7.1.1| | 107 |
| Rear Statutory seat belt missing |5.1.1| | 106 |
| Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 106 |
| Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 106 |
| Statutory seat belt missing |5.1.1| | 106 |
| Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 106 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 106 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 106 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 106 |
| Nearside Front Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 105 |
| Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 105 |
| Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 105 |
| Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 105 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 104 |
| Offside Front front brake juddering severely |3.7.A.2b| | 104 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 104 |
| Nearside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 104 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 104 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 103 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 103 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 103 |
| Nearside Brake cable has restricted free movement |3.5.1k| | 103 |
| Driver`s airbag obviously defective |5.4.1| | 103 |
| Offside Front Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 102 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 102 |
| Nearside Suspension arm has excessive play in a pin/bush |2.4.G.2| | 102 |
| Offside Brake cable has restricted free movement |3.5.1k| | 102 |
| Offside Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 102 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 102 |
| Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 102 |
| Nearside Rear brake drum contaminated by brake fluid |3.5.1h| | 102 |
| Offside Rear Leaf spring fractured (5.3.1 (b) (i)) | 102 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 101 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 100 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 100 |
| Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 100 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 100 |
| Nearside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 100 |
| Offside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 100 |
| Nearside Front Shock absorbers has a serious fluid leak | 99 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 99 |
| Brake load sensing valve defective and function impaired |3.6.E.3| | 99 |
| Nearside Front front brakes release unevenly |3.7.B.4| | 99 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 99 |
| Nearside Rear Loading door cannot be secured in the closed position |6.4.1| | 98 |
| Spare wheel insecure |6.4.2| | 98 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 98 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 98 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 98 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 98 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 97 |
| Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 97 |
| Power steering pump drive system defective |2.3.6| | 97 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 97 |
| Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 97 |
| Nearside Front Brake pipe inadequately supported |3.6.B.1| | 97 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 96 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 96 |
| Nearside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 96 |
| Rear Body insecure and dangerous to other road users |6.1.B.1b| | 96 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 96 |
| Offside Rear Shock absorber insecure |2.7.2b| | 96 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 96 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 96 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 95 |
| Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 95 |
| Emissions not tested |7.4.B.1| | 95 |
| Offside Seat belt retracting mechanism defective |5.2.5b| | 95 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 95 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 95 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 95 |
| Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 95 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 94 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 94 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 94 |
| Offside Rear Stop lamp emits other than a steady red light |1.2.1e| | 94 |
| Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 94 |
| Offside Suspension arm has excessive play in a pin/bush |2.4.G.2| | 94 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 94 |
| Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 94 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 93 |
| Headlamp not working on dipped beam |1.7.5a| | 93 |
| Offside Rear Exhaust system not adequately supported |7.1.1| | 93 |
| Offside Front Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 93 |
| Nearside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 93 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 92 |
| Nearside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 92 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 92 |
| Supplementary restraint system warning lamp indicates a fault |7.1.6 |a|| | 92 |
| Nearside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 91 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 91 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 91 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 91 |
| Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 91 |
| Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 90 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 90 |
| Offside Headlamp insecure |1.7.3| | 90 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 90 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 90 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 90 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 90 |
| Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 90 |
| Centre Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 90 |
| Nearside Front Statutory seat belt missing |5.1.1| | 90 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 90 |
| Centre Rear Statutory seat belt missing |5.1.1| | 89 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 89 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 89 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 89 |
| Front Windscreen wiper blade deteriorated |8.2.2| | 89 |
| Nearside Front Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 89 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 89 |
| Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 89 |
| Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 89 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 89 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 89 |
| Nearside Front Side repeater missing |1.4.A.2b| | 88 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 88 |
| Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 88 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 88 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 88 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 88 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 88 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 88 |
| Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 88 |
| Offside Rear position lamp|s| insecure |1.1.A.3a| | 87 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 87 |
| Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 87 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 87 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 86 |
| Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 86 |
| Offside Front Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 86 |
| Nearside Rear Leaf spring longitudinally displaced |2.4.B.1d| | 86 |
| Offside Rear An item not tested |Manual| | 86 |
| Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 86 |
| Rear Exhaust mounting missing |7.1.1b| | 86 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 85 |
| Offside Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 85 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 85 |
| Offside Rear Leaf spring longitudinally displaced |2.4.B.1d| | 85 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 85 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 85 |
| Offside Obligatory mirror does not provide a view to the rear |8.1.2b| | 85 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 85 |
| Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 85 |
| Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 85 |
| Nearside Parking brake inoperative on one side |1.4.1 |a|| | 85 |
| Nearside Rear passenger door does not latch securely closed |6.2.B.1a| | 84 |
| Offside Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 84 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 84 |
| Windscreen wiper blade deteriorated |8.2.2| | 84 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 84 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |6.4.B.2| | 84 |
| Transmission brake efficiency below requirements |3.8.A.9/10| | 84 |
| Offside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 84 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 83 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 83 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 83 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 83 |
| Drivers seat insecure (6.2.5 (a) (ii)) | 83 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 83 |
| Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 82 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 82 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 82 |
| Nearside Windscreen wiper blade missing |8.2.2| | 82 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 82 |
| Front Body has a sharp edge caused by damage |6.1.C.1| | 82 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 82 |
| Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 82 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 82 |
| Towbar retaining device missing |6.6.3a| | 81 |
| Nearside Rear Anti-roll bar insecure |2.4.G.1| | 81 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 81 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 81 |
| Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 81 |
| Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 81 |
| Offside Front coil spring cracked |2.4.C.1a| | 81 |
| Central Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 81 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 81 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 81 |
| Offside Seat belt affected by an insecure seat fixing |5.2.1b| | 81 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 80 |
| Nearside Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 80 |
| Steering system excessively tight |2.2.D.1| | 80 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 80 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 80 |
| Nearside Rear reflector missing |1.5.1a| | 79 |
| Nearside Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 79 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 79 |
| Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 79 |
| Offside Front Body has a projection caused by corrosion |6.1.C.1| | 79 |
| Offside Front Track rod end ball pin shank loose |2.2.B.1c| | 79 |
| Centre Seat belt retracting mechanism defective |5.2.5b| | 79 |
| Rear Braking system leaking |3.6.A.1| | 79 |
| Offside Seat belt stitching badly frayed |5.2.2b| | 79 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 79 |
| Nearside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 79 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 78 |
| Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 78 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 78 |
| Nearside Direction indicator not working |1.4.A.2c| | 78 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 78 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 78 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 78 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 78 |
| Nearside Front front brake juddering severely |3.7.A.2b| | 77 |
| Nearside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 77 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 77 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 77 |
| Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 77 |
| Offside Front Shock absorbers has a serious fluid leak | 77 |
| Nearside Front Wheel nut|s| loose |4.2.A.1e| | 77 |
| Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 77 |
| Offside Rear Anti-roll bar insecure |2.4.G.1| | 77 |
| Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 77 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 76 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 76 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 76 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 76 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 76 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 76 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 75 |
| Offside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 75 |
| Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 75 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 75 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 74 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 74 |
| Nearside Rear Rear fog lamp emits a light other than red |1.3.2e| | 74 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 74 |
| Brake performance not tested (1.2.1 (g)) | 74 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 74 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 74 |
| Headlamp not working on main beam |1.7.5a| | 74 |
| Offside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 73 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 73 |
| Nearside Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 73 |
| Nearside Front Track rod end ball pin shank loose |2.2.B.1c| | 73 |
| Centre Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 73 |
| Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 73 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 73 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 72 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 72 |
| Nearside Front Brake hose leaking |3.6.A.1| | 72 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 72 |
| Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 72 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 72 |
| Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 72 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 72 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 72 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 71 |
| Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 71 |
| Offside brake disc in such a condition that it is seriously weakened |3.5.1i| | 71 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 71 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 71 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 71 |
| Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 71 |
| Offside Front Direction indicators not working |1.4.A.2c| | 71 |
| Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 71 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 71 |
| Nearside Outer Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 71 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 71 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 71 |
| Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 71 |
| Offside Front brake disc cracked |3.5.1h| | 71 |
| Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 71 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 71 |
| Nearside Front Horn not working |1.6.2a| | 70 |
| Offside Front Brake hose twisted |3.6.B.4c| | 70 |
| Nearside Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 70 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 70 |
| Spare wheel carrier insecure |6.4.2| | 70 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 70 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 70 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 69 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 69 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 69 |
| Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 69 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 69 |
| Rear fog lamp switch faulty |1.3.1a| | 69 |
| Front Brake pipe inadequately clipped |3.6.B.1| | 69 |
| Driver`s seat insecure |6.2.5 |a| |ii|| | 69 |
| rear brake excessively fluctuating |3.7.B.3| | 68 |
| Offside Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 68 |
| Brake load sensing valve obviously incorrectly adjusted |3.6.E.3| | 68 |
| Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 68 |
| Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 68 |
| Nearside Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 68 |
| Offside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 68 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 68 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 68 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 68 |
| passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 68 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 68 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 68 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 68 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 68 |
| Centre Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 67 |
| Nearside Front coil spring cracked |2.4.C.1a| | 67 |
| Rear Exhaust has a part missing |7.1.1a| | 67 |
| Nearside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 67 |
| Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 67 |
| Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 67 |
| Rear fog lamp emits a light other than red |1.3.2e| | 67 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 67 |
| Front An item not tested |Manual| | 67 |
| Nearside Rear Leaf spring to axle securing bolt insecure |2.4.B.7b| | 67 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 67 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 66 |
| Offside Rear rear brake excessively fluctuating |3.7.B.3| | 66 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 66 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 66 |
| Nearside Side repeater insecure |1.4.A.2b| | 66 |
| Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 66 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 66 |
| Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 66 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 66 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 66 |
| Nearside Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 65 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 65 |
| Nearside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 65 |
| Offside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 65 |
| Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 65 |
| Offside Rear Valve stem seriously damaged |4.1.D.1e| | 65 |
| Offside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 65 |
| Nearside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 65 |
| Front Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 65 |
| Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 65 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 65 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 65 |
| Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 65 |
| Nearside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 65 |
| Offside Front constant velocity joint is insecure |2.5.C.1b| | 65 |
| Offside Parking brake inoperative on one side |1.4.1 |a|| | 65 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 65 |
| Exhaust has a part missing |7.1.1a| | 64 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 64 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 64 |
| Nearside Rear Leaf spring fractured (5.3.1 (b) (i)) | 64 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 64 |
| Offside Rear brake drum contaminated by brake fluid |3.5.1h| | 64 |
| Nearside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 64 |
| Nearside Front Brake hose twisted |3.6.B.4c| | 64 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 64 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 64 |
| Nearside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 64 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 64 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 64 |
| Steering rack insecure |2.2.B.1a| | 63 |
| Offside Direction indicator not working |1.4.A.2c| | 63 |
| Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 63 |
| front brake binding |3.7.B.1| | 63 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 63 |
| Front Headlamp not working on dipped beam |1.7.5a| | 63 |
| Offside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 63 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 63 |
| Rear Body has a sharp edge caused by damage |6.1.C.1| | 63 |
| Offside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 63 |
| Offside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 63 |
| Fuel tank insecure (6.1.3 (a) (i)) | 63 |
| Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 63 |
| Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 63 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 63 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 63 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 62 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 62 |
| Emissions not tested (8.2.2.2 (e)) | 62 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 62 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 62 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 62 |
| Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 62 |
| Nearside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 62 |
| Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 62 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 62 |
| Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 62 |
| Offside Front Wheel stud|s| missing |4.2.A.1e| | 62 |
| Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 62 |
| Front wheel bearing rough when rotated |2.5.A.2| | 61 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 61 |
| Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 61 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 61 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 61 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 61 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 61 |
| Nearside Front constant velocity joint is insecure |2.5.C.1b| | 61 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 61 |
| Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 61 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 61 |
| Brake pipe leaking |3.6.A.1| | 61 |
| Nearside Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 61 |
| Offside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 61 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 61 |
| Nearside Rear Body has a projection caused by corrosion |6.1.C.1| | 61 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 61 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 61 |
| Front Fuel tank insecure |7.2.1| | 61 |
| Brake valve insecurely mounted |3.6.A.2a| | 61 |
| Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 61 |
| Offside Rear Leaf spring to axle securing bolt insecure |2.4.B.7b| | 61 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 61 |
| Brake cable has restricted free movement |3.5.1k| | 61 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 60 |
| Offside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 60 |
| Offside Front Side repeater missing |1.4.A.2b| | 60 |
| Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 60 |
| Nearside Steering rack gaiter insecure |2.2.D.2d| | 60 |
| Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 60 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 60 |
| Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values |8.2.2.2 |f|| | 60 |
| Offside Rear reflector missing |1.5.1a| | 60 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 60 |
| Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 60 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 60 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 60 |
| Nearside Rear rear brake grabbing severely |3.7.A.5b| | 60 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 60 |
| Loading door cannot be secured in the closed position |6.4.1| | 60 |
| Offside Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 60 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 60 |
| Offside Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 60 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 60 |
| Nearside Side repeater incomplete |1.5.A1b| | 60 |
| Fuel hose leaking |7.2.3| | 60 |
| Offside Front Headlamp insecure |1.7.3| | 60 |
| Offside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 59 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 59 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 59 |
| Rear An item not tested |Manual| | 59 |
| Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 59 |
| Nearside Front Wheel stud|s| missing |4.2.A.1e| | 59 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 59 |
| Offside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 59 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 59 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 59 |
| Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 59 |
| Nearside passenger door does not latch securely closed |6.2.B.1a| | 59 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 59 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 59 |
| Offside Front Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 59 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 59 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users |8.2.2.2 |c|| | 59 |
| Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 59 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 59 |
| Nearside Rear position lamp|s| insecure |1.1.A.3a| | 58 |
| Nearside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 58 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 58 |
| Brake pedal anti-slip provision worn smooth |1.1.2 |c|| | 58 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 58 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 58 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 58 |
| Front All position lamps not working |1.1.A.3b| | 58 |
| Offside Front Wheel nut|s| loose |4.2.A.1e| | 58 |
| Nearside brake disc in such a condition that it is seriously weakened |3.5.1i| | 58 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 57 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 57 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 57 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 57 |
| Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 57 |
| Offside Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 57 |
| Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 57 |
| Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 57 |
| Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 57 |
| Hinged tailboard cannot be secured in the closed position |6.4.1| | 57 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 57 |
| Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 56 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 56 |
| Nearside Rear rear brake excessively fluctuating |3.7.B.3| | 56 |
| Offside Front Front constant velocity joint is insecure |2.5.C.1b| | 56 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 56 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 56 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 56 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 56 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 56 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 56 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 56 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 56 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 56 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 56 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 56 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 56 |
| Offside Front Brake hose leaking |3.6.A.1| | 56 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 55 |
| Towbar locking device missing |6.6.3b| | 55 |
| Central Rear Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 55 |
| Offside Rear Leaf spring main leaf fractured (5.3.1 (b) (ii)) | 55 |
| Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 55 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 55 |
| Offside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 55 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 55 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 55 |
| Offside Front drive shaft support bearing excessively worn |2.5.C.2c| | 55 |
| Nearside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 55 |
| Nearside Statutory seat belt missing |5.1.1| | 54 |
| front brake juddering severely |3.7.A.2b| | 54 |
| Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 54 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 54 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 54 |
| Brake pedal has no servo assistance |3.3.B.2| | 54 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 54 |
| Nearside Front Side repeater incorrect colour |1.4.A.2f| | 54 |
| Rear Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 54 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 53 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 53 |
| Offside Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 53 |
| Offside Rear rear brake grabbing severely |3.7.A.5b| | 53 |
| Centre Seat belt locking mechanism does not secure or release |5.2.5a| | 53 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 53 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 53 |
| Nearside Parking brake recording little or no effort |3.7.D.3a| | 53 |
| Nearside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 53 |
| Front front brake juddering severely |3.7.A.2b| | 53 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 53 |
| Offside Rear Brake pipe excessively damaged |3.6.B.2c| | 53 |
| Nearside Dropside cannot be secured in the closed position |6.4.1| | 53 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 53 |
| Offside Front Seat belt anchorage prescribed area is fractured |5.2.6| | 53 |
| Nearside Body insecure and dangerous to other road users |6.1.B.1b| | 53 |
| Rear Anti-roll bar linkage insecure |2.4.G.1| | 52 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 52 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 52 |
| Front Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 52 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 52 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 52 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 52 |
| Offside Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 52 |
| Offside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 52 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 52 |
| Speedometer clearly inoperative |6.7.2| | 52 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 52 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 52 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 52 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 52 |
| Offside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 52 |
| Nearside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 51 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 51 |
| Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 51 |
| Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 51 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 51 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 51 |
| Brake hydraulic reservoir cap missing |3.6.G.1a| | 51 |
| Offside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 51 |
| Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 51 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 51 |
| Offside Front brake caliper leaking |3.6.A.1| | 51 |
| Rear Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 51 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 51 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 51 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 51 |
| Offside Body insecure and dangerous to other road users |6.1.B.1b| | 51 |
| Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 51 |
| Offside Front Valve stem seriously damaged |4.1.D.1e| | 50 |
| Nearside Front Headlamp aim not tested |1.8.A.1c| | 50 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 50 |
| Centre Front Seat belt retracting mechanism defective |5.2.5b| | 50 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 50 |
| Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 50 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 50 |
| Centre Rear Seat belt retracting mechanism defective |5.2.5b| | 50 |
| Offside Front Service brake lagging in operation (1.2.1 (d)) | 50 |
| Nearside Seat belt stitching badly frayed |5.2.2b| | 50 |
| Nearside Front front brake recording little or no effort |3.7.B.5a| | 50 |
| Nearside Front Drag link end ball joint has excessive play |2.2.B.1f| | 50 |
| Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 50 |
| Offside Track rod end ball pin shank loose |2.2.B.1c| | 50 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 49 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 49 |
| Offside Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 49 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 49 |
| Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 49 |
| Nearside Body has a projection caused by corrosion |6.1.C.1| | 49 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 49 |
| Nearside Body has a projection caused by damage |6.1.C.1| | 49 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 49 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 49 |
| Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 49 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 49 |
| Nearside Lower Ball joint has excessive play |2.2.B.1f| | 49 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 49 |
| Nearside Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 49 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 49 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 49 |
| Nearside Rear Brake valve leaking |3.6.A.1| | 49 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 49 |
| Nearside Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 49 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 49 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 48 |
| Nearside Front Headlamp insecure |1.7.3| | 48 |
| Offside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 48 |
| Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 48 |
| Exhaust mounting missing |7.1.1b| | 48 |
| Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 48 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 48 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 48 |
| Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 48 |
| Shock absorber has a serious fluid leak |2.7.3| | 48 |
| brake disc excessively pitted |3.5.1h| | 48 |
| Rear rear brakes release unevenly |3.7.B.4| | 48 |
| passenger door does not latch securely closed |6.2.B.1a| | 48 |
| Offside Front Headlamp aim not tested |1.8.A.1c| | 48 |
| Offside front brake grabbing severely |3.7.A.2b| | 48 |
| Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 48 |
| Nearside Front Valve stem seriously damaged |4.1.D.1e| | 48 |
| Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 48 |
| Offside Front Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 48 |
| Nearside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 48 |
| Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 48 |
| Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 48 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 48 |
| Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 47 |
| Offside Brake cable has wires broken and is significantly weakened |3.5.1b| | 47 |
| Offside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 47 |
| Offside Rear Parking brake inoperative on one side |1.4.1 |a|| | 47 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 47 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 47 |
| Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 47 |
| Brake load sensing valve has been disconnected and was fitted as standard |3.6.E.2| | 47 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 47 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 47 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 47 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 47 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 47 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 47 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 47 |
| Offside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 47 |
| Offside Side repeater incomplete |1.5.A1b| | 46 |
| Centre Brake pipe inadequately clipped |3.6.B.1| | 46 |
| Front position lamp|s| incorrect colour |1.1.A.3e| | 46 |
| Nearside Rear Body has a projection caused by damage |6.1.C.1| | 46 |
| Rear Brake load sensing valve inoperative |3.6.E.3| | 46 |
| Offside Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 46 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 46 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 46 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 46 |
| Offside Rear Leaf spring damaged and permanently distorted |2.4.B.1a| | 46 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 46 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 46 |
| Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 46 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 46 |
| Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 46 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 46 |
| Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 46 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 46 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 46 |
| Nearside Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 46 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 46 |
| Nearside Rear Wheel stud|s| missing |4.2.A.1e| | 46 |
| Offside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 45 |
| Windscreen washer control missing |8.2.1a| | 45 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 45 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 45 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 45 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 45 |
| Offside Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 45 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 45 |
| Tailgate cannot be secured in the closed position |6.4.1| | 45 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 45 |
| Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 45 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 45 |
| Offside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 45 |
| Offside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 45 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 45 |
| Offside Headlamp aim beam image too far to the right |1.6.B4| | 45 |
| Nearside Front Brake hose excessively damaged |3.6.B.4d| | 45 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 45 |
| Horn does not function |6.2.1b| | 45 |
| Nearside Rear Direction indicators not in good working order |function impaired| |1.5.A1b| | 45 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 45 |
| Offside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 45 |
| Offside Rear Loading door cannot be secured in the closed position |6.4.1| | 44 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 44 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 44 |
| Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 44 |
| Hazard warning switch missing |1.4.B.1d| | 44 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 44 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 44 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 44 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 44 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 44 |
| Rear Rear position lamp|s| not working |1.1.A.3b| | 44 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 44 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 44 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 44 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 44 |
| Body has a projection caused by damage |6.1.C.1| | 44 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 44 |
| Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 44 |
| Nearside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 43 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 43 |
| Nearside Front Service brake excessively binding |1.2.1 |f|| | 43 |
| Offside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 43 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 43 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 43 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 43 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 43 |
| Nearside Front Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 43 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 43 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 43 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 43 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 43 |
| Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 43 |
| Nearside Front An item not tested |Manual| | 43 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 43 |
| Stop lamp not working both |1.2.1b| | 43 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 43 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 43 |
| Centre Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 43 |
| Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 42 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 42 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 42 |
| Nearside Front Service brake lagging in operation (1.2.1 (d)) | 42 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 42 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 42 |
| Nearside Front brake disc insecure |3.5.1i| | 42 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 42 |
| Suspension arm has excessive play in a pin/bush |2.4.G.2| | 42 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 42 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 42 |
| Offside Front An item not tested |Manual| | 42 |
| Nearside Front brake disc cracked |3.5.1h| | 42 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 42 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 42 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 42 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 42 |
| Offside Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 42 |
| Rear Exhaust system insecure (6.1.2 (a)) | 42 |
| Offside Rear Leaf spring fractured |5.3.1 |b| |i|| | 42 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 42 |
| Offside Track rod end loose |2.2.B.1d| | 42 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 42 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 42 |
| Offside Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 42 |
| Nearside front brake grabbing severely |3.7.A.2b| | 42 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 42 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 41 |
| Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 41 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 41 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 41 |
| Offside Front brake disc insecure |3.5.1i| | 41 |
| Offside Front Seat belt insecurely fixed to the seat |5.2.1a| | 41 |
| Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 41 |
| Nearside Front Seat belt insecurely fixed to the seat |5.2.1a| | 41 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 41 |
| Nearside Loading door cannot be secured in the closed position |6.4.1| | 41 |
| Nearside Front brake caliper leaking |3.6.A.1| | 41 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 41 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 41 |
| Horn sound not in accordance with requirements (7.7 (c)) | 41 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 41 |
| Rear Passenger`s seat insecure |6.2.A.1| | 41 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 41 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 41 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 41 |
| Offside Rear rear brake juddering severely |3.7.A.5b| | 41 |
| Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 41 |
| Seat belt retracting mechanism defective |5.2.5b| | 41 |
| Front Driver`s seat insecure |6.2.A.1| | 41 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 41 |
| Nearside Rear rear brake juddering severely |3.7.A.5b| | 41 |
| Offside Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 41 |
| Nearside Headlamp aim beam image too far to the right |1.6.B4| | 41 |
| Nearside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 41 |
| Offside Rear Leaf spring eye defective |shackle| |2.4.B.1b| | 41 |
| Nearside Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 41 |
| Offside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 40 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 40 |
| Offside Headlamp levelling device inoperative (4.1.5 (a)) | 40 |
| Nearside Obligatory mirror missing (3.3 (a)) | 40 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 40 |
| Offside Direction indicators not working |1.4.A.2c| | 40 |
| Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 40 |
| Offside Windscreen wiper blade missing |8.2.2| | 40 |
| Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 40 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 40 |
| Front Fuel pipe leaking |7.2.3| | 40 |
| Nearside Front Stop lamp not working |1.2.1b| | 40 |
| Nearside Rear Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 40 |
| Nearside Front Bumper insecure (6.1.4 (a) (i)) | 40 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 40 |
| Offside Front position lamp|s| not in good working order |not working| |1.1.4a| | 40 |
| Nearside Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 40 |
| Nearside Front Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 40 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 40 |
| Nearside Rear Brake cable locking device insecure |3.5.1l| | 40 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 40 |
| Nearside Rear Leaf spring eye defective |shackle| |2.4.B.1b| | 40 |
| Service brake: efficiency below requirements |3.7.C.1a| | 39 |
| Nearside Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 39 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 39 |
| Nearside Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 39 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 39 |
| Front wheel bearing has excessive play |2.5.A.3c| | 39 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 39 |
| Centre Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 39 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 39 |
| Power steering pump leaking from a failed joint |2.3.3b| | 39 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 39 |
| Nearside Front brake disc contaminated by oil |3.5.1h| | 39 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 39 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 39 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 39 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 39 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 39 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 39 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 39 |
| Nearside Headlamps matched pair are incorrectly positioned |1.7.3| | 39 |
| Offside Dropside cannot be secured in the closed position |6.4.1| | 39 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 39 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 39 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 39 |
| Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 39 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 39 |
| Nearside Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 39 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 39 |
| Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 39 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 39 |
| Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 38 |
| Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 38 |
| Headlamp levelling device inoperative (4.1.5 (a)) | 38 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 38 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 38 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 38 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 38 |
| Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 38 |
| Front Brake pipe leaking |3.6.A.1| | 38 |
| Electrical wiring insecure |1.9.2a| | 38 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 38 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 38 |
| Centre Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 38 |
| Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 38 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 38 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 38 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 38 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 38 |
| Speedometer cannot be illuminated. |6.7.3| | 38 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 38 |
| Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 38 |
| Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 38 |
| Nearside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 38 |
| Offside Headlamps matched pair are incorrectly positioned |1.7.3| | 38 |
| Nearside Rear Leaf spring main leaf fractured (5.3.1 (b) (ii)) | 38 |
| Rear Anti-roll bar worn and seriously weakened |2.4.G.1| | 38 |
| Nearside Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 38 |
| Nearside Track rod end ball pin shank loose |2.2.B.1c| | 38 |
| Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 38 |
| Nearside Front Road wheel badly damaged |4.2.A.1a| | 38 |
| Nearside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 38 |
| Nearside Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 38 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 38 |
| Offside Front front brake recording little or no effort |3.7.B.5a| | 37 |
| Offside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 37 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 37 |
| Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 37 |
| Horn emits two or more alternating tones |1.6.2d| | 37 |
| Rear Electrical wiring insecure |1.9.2a| | 37 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 37 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 37 |
| Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 37 |
| Offside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 37 |
| Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 37 |
| Emissions not tested |8.2.2.2 |e|| | 37 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 37 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.2| | 37 |
| Offside Front Service brake lagging in operation |1.2.1 |d|| | 37 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 37 |
| Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 37 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 37 |
| Nearside Rear Service brake indicates brake bind |3.7.D.2a| | 37 |
| Nearside Rear Brake pipe excessively damaged |3.6.B.2c| | 37 |
| Nearside Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 37 |
| Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 36 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 36 |
| Nearside Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 36 |
| Nearside Rear Brake pipe leaking |3.6.A.1| | 36 |
| Nearside Front Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 36 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 36 |
| Offside Rear fog lamp obviously incorrectly positioned |1.3.2a| | 36 |
| Nearside Rear Brake pipe kinked |3.6.B.2b| | 36 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 36 |
| Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 36 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 36 |
| Nearside Front position lamp|s| not in good working order |not working| |1.1.4a| | 36 |
| Nearside Front Headlamp not in good working order |not working| |1.2.4a| | 36 |
| Offside Front Bumper insecure (6.1.4 (a) (i)) | 36 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 36 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 36 |
| Front Front wheel bearing has excessive play |2.5.A.3c| | 36 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 36 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 36 |
| Offside Front brake caliper securing device loose |3.5.1j| | 36 |
| Front Brake pipe inadequately supported |3.6.B.1| | 36 |
| Nearside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 36 |
| Offside Stop lamp not working |1.3.2a| | 36 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 35 |
| Nearside Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 35 |
| Offside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 35 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 35 |
| Nearside Direction indicators not working |1.4.A.2c| | 35 |
| Nearside Rear Leaf spring damaged and permanently distorted |2.4.B.1a| | 35 |
| Fuel pipe union leaking |7.2.3| | 35 |
| Offside Rear Hazard warning lamps inoperative |1.4.B.1b| | 35 |
| Offside Body has a projection caused by corrosion |6.1.C.1| | 35 |
| Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 35 |
| Nearside Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 35 |
| Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 35 |
| Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 35 |
| Emissions not tested |7.3.A.1| | 35 |
| Offside Rear Brake pipe kinked |3.6.B.2b| | 35 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 35 |
| Nearside Track rod end loose |2.2.B.1d| | 35 |
| Offside Side repeater insecure |1.4.A.2b| | 35 |
| Headlamp switch faulty |1.7.1| | 35 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 35 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 35 |
| Offside Front Rear fog lamp not working |1.3.2b| | 35 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 35 |
| Offside Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 35 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 35 |
| Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 35 |
| Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 35 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 35 |
| Centre Brake pedal anti-slip provision incomplete |3.3.A.1b| | 35 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 35 |
| Centre Front Seat belt locking mechanism does not secure or release |5.2.5a| | 35 |
| Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 35 |
| Offside Rear passenger door does not latch securely closed |6.2.B.1a| | 34 |
| Offside Rear Brake pipe inadequately supported |3.6.B.1| | 34 |
| Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 34 |
| Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 34 |
| Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 34 |
| Offside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 34 |
| Nearside Rear Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 34 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 34 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 34 |
| Nearside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 34 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 34 |
| Driver`s door cannot be opened from outside the vehicle |6.2.3 |a|| | 34 |
| Brake valve has an excessive discharge of oil |3.6.E.1| | 34 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 34 |
| Towbar component excessively damaged |6.6.1| | 34 |
| rear brake grabbing severely |3.7.A.5b| | 34 |
| Nearside Rear fog lamp does not emit a steady red light |1.3.2e| | 34 |
| Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 34 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 34 |
| Nearside Front brake caliper has restricted free movement |3.5.1k| | 34 |
| Front position lamp|s| not working both |1.1.A.3b| | 34 |
| Offside Rear Body has a projection caused by damage |6.1.C.1| | 34 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 34 |
| Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 34 |
| Horn control missing |1.6.1| | 34 |
| Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 34 |
| Offside Front Track rod end loose |2.2.B.1d| | 34 |
| Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 34 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 34 |
| Nearside Front Side repeater incomplete |1.5.A1b| | 34 |
| Offside Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 34 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 34 |
| Nearside Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 34 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 34 |
| Rear position lamp|s| incorrect colour |1.1.A.3e| | 34 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 34 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 34 |
| Nearside Front Track rod end loose |2.2.B.1d| | 34 |
| Offside rear brakes release unevenly |3.7.B.4| | 33 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 33 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 33 |
| Nearside Rear Hazard warning lamps inoperative |1.4.B.1b| | 33 |
| Offside Rear Service brake excessively fluctuating |1.2.1 |e|| | 33 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 33 |
| Offside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 33 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 33 |
| Nearside Front Bumper insecure |6.1.4 |a| |i|| | 33 |
| Power steering component|s| leaking from a failed joint |2.3.3b| | 33 |
| Nearside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 33 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 33 |
| Nearside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 33 |
| Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 33 |
| Trailer electrical socket deteriorated so that lead cannot be securely connected |1.9.3b| | 33 |
| Offside Rear Track rod end ball joint has excessive play |2.2.B.1f| | 33 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 33 |
| Front Headlamp not working on main beam |1.7.5a| | 33 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 33 |
| Nearside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 33 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 33 |
| Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 33 |
| Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 33 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 33 |
| Windscreen in an unacceptable condition (3.2 (c) (i)) | 33 |
| Offside Front Anti-roll bar linkage missing |2.4.G.1| | 33 |
| Nearside Outer Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 33 |
| Nearside rear brakes release unevenly |3.7.B.4| | 33 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 33 |
| Fuel tank insecure |6.1.3 |a| |i|| | 33 |
| Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 33 |
| Exhaust emits an excessive level of metered smoke |7.4.B.3a| | 33 |
| Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 33 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 33 |
| Offside Rear Direction indicators not in good working order |function impaired| |1.5.A1b| | 32 |
| Central Rear Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 32 |
| Offside Rear Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 32 |
| Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 32 |
| Offside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 32 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 32 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 32 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 32 |
| Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 32 |
| Upper Front position lamp|s| not working |1.1.A.3b| | 32 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 32 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 32 |
| Nearside Front Seat belt anchorage prescribed area is fractured |5.2.6| | 32 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 32 |
| Offside Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 32 |
| Nearside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 32 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 32 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 32 |
| Offside Front Stop lamp not working |1.2.1b| | 32 |
| Centre Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 32 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 32 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 32 |
| Front Front wheel bearing rough when rotated |2.5.A.2| | 32 |
| Offside Hazard warning lamps inoperative |1.4.B.1b| | 32 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 32 |
| Power steering component|s| leaking rack |2.3.3b| | 32 |
| Nearside Stop lamp not working |1.3.2a| | 32 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 32 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 32 |
| Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 32 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 32 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 32 |
| Nearside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 32 |
| Centre Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 32 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 32 |
| Nearside Front Upper All position lamps not working |1.1.A.3b| | 32 |
| Offside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 32 |
| Nearside Front Anti-roll bar linkage missing |2.4.G.1| | 32 |
| Offside Front Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 32 |
| Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 32 |
| Rear Shock absorber has negligible damping effect |2.7.5| | 31 |
| Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 31 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 31 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 31 |
| Centre Front Exhaust has a major leak of exhaust gases |7.1.2| | 31 |
| Offside Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 31 |
| Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 31 |
| Nearside Rear Service brake excessively fluctuating |1.2.1 |e|| | 31 |
| Nearside Headlamp not in good working order |not working| |1.2.4a| | 31 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 31 |
| Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 31 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 31 |
| Centre Front Fuel system component leaking |7.2.3| | 31 |
| Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 31 |
| All position lamps not working |4.2.1 |a|| | 31 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 31 |
| Hazard warning lamps operated by more than one switch |1.4.B.1c| | 31 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 31 |
| Nearside Side repeater not working |4.4.1 |a| |ii|| | 31 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 31 |
| Vehicle Identification Number not permanently displayed |6.3.5.a| | 31 |
| Offside Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 31 |
| Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 31 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 31 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 31 |
| Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 31 |
| Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 31 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 31 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 31 |
| Brake performance not tested |1.2.1 |g|| | 31 |
| Offside Front Bumper insecure |6.1.4 |a| |i|| | 31 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 31 |
| Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour |8.2.2.2 |d|| | 31 |
| Offside Rear Fluid suspension unit leaking |2.4.D.2| | 31 |
| Nearside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 31 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 31 |
| Offside Front Side repeater incomplete |1.5.A1b| | 31 |
| Nearside Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 30 |
| Centre Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 30 |
| Nearside Rear Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 30 |
| Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 30 |
| Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 30 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 30 |
| Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 30 |
| Rear Service brake application uneven across the axle |3.7.D.2b| | 30 |
| rear brake juddering severely |3.7.A.5b| | 30 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 30 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 30 |
| Offside Front Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 30 |
| Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 30 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 30 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 30 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 30 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 30 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 30 |
| Nearside Rear Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 30 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 30 |
| Centre Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 30 |
| Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 30 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 30 |
| Offside Front Upper All position lamps not working |1.1.A.3b| | 30 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 30 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 30 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 30 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 30 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 30 |
| Nearside Upper Rear position lamp|s| not working |1.1.A.3b| | 30 |
| Nearside Rear Dropside cannot be secured in the closed position |6.4.1| | 30 |
| Seat belt locking mechanism does not secure or release |5.2.5a| | 30 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 30 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 30 |
| Nearside Rear Leaf spring anchor bracket loose |2.4.B.6a| | 29 |
| Nearside Rear position lamp|s| missing |1.1.A.3a| | 29 |
| Offside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 29 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 29 |
| Rear All position lamps not working |1.1.A.3b| | 29 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 29 |
| Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 29 |
| Nearside Rear Brake valve insecurely mounted |3.6.A.2a| | 29 |
| Nearside An item not tested |Manual| | 29 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 29 |
| Offside Headlamp not in good working order |not working| |1.2.4a| | 29 |
| Offside Front Service brake excessively fluctuating |1.2.1 |e|| | 29 |
| Rear brake disc in such a condition that it is seriously weakened | 29 |
| Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 29 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 29 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 29 |
| Offside Position lamp not working |4.2.1 |a|| | 29 |
| Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 29 |
| Central Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 29 |
| Horn not a constant note |1.7.1e| | 29 |
| Nearside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 29 |
| Centre Exhaust mounting missing |7.1.1b| | 29 |
| Offside Parking brake recording little or no effort |3.7.D.3a| | 29 |
| Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 29 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 29 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 29 |
| Offside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 29 |
| Nearside Front brake caliper securing device missing |3.5.1j| | 29 |
| Power steering pipe/hose leaking (2.1.5 (a)) | 29 |
| Offside Front Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 29 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 29 |
| Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 29 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 29 |
| Offside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 29 |
| Nearside Rear Outline marker lamp not working |4.2.1 |a|| | 29 |
| Parking brake lever is impeded in its travel |3.1.6c| | 29 |
| Nearside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 29 |
| Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 29 |
| Nearside Front Body panel corroded and likely to cause injury wing |6.2.1 |a| |i|| | 29 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 29 |
| Offside Front Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 29 |
| Nearside Rear Outline marker lamp missing (4.2.1 (a) (ii)) | 29 |
| Bonnet retaining device insecure |8.4.2| | 29 |
| Front passenger seat insecure |6.2.3| | 28 |
| Nearside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 28 |
| Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 28 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 28 |
| Centre Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 28 |
| engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 28 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 28 |
| Nearside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 28 |
| Offside Front front brake grabbing severely |3.7.A.2b| | 28 |
| Offside Lower Ball joint has excessive play |2.2.B.1f| | 28 |
| Brake has no servo assistance |3.3.B.2| | 28 |
| Nearside Rear Service brake lagging in operation |1.2.1 |d|| | 28 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 28 |
| Rear Brake valve insecurely mounted |3.6.A.2a| | 28 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 28 |
| Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 28 |
| Offside Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 28 |
| Obligatory mirror missing |8.1.1| | 28 |
| Offside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 28 |
| Rear Seat belt retracting mechanism defective |5.2.5b| | 28 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 28 |
| Offside Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 28 |
| Emergency exit window ???break glass` hammer missing |6.2.D.2| | 28 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 28 |
| Brake pedal pad not secure to the pedal |3.3.A.1c| | 28 |
| Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 28 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 28 |
| Nearside Leaf spring fractured |2.4.B.1a| | 28 |
| Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 28 |
| Nearside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 28 |
| Offside Rear Wheel stud|s| missing |4.2.A.1e| | 28 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 28 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 28 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 28 |
| Headlamp aim beam image obviously incorrect |1.8.A.1b| | 28 |
| Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 28 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 28 |
| Nearside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 28 |
| Offside Front Statutory seat belt missing |5.1.1| | 28 |
| Nearside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 28 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 28 |
| Offside Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 28 |
| Power steering ram|s| leaking from a failed component |2.3.3b| | 27 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 27 |
| Offside Rear Outline marker lamp missing (4.2.1 (a) (ii)) | 27 |
| Nearside Inner Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 27 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 27 |
| Nearside Rear Anti-roll bar worn and seriously weakened |2.4.G.1| | 27 |
| Offside Rear Anti-roll bar worn and seriously weakened |2.4.G.1| | 27 |
| Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 27 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 27 |
| Nearside Rear Fluid suspension unit leaking |2.4.D.2| | 27 |
| Front Bonnet retaining device ineffective |8.4.2| | 27 |
| Offside Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 27 |
| Offside Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 27 |
| Nearside Rear Leaf spring main leaf fractured |5.3.1 |b| |ii|| | 27 |
| Offside Rear Rear position lamp|s| insecure |1.1.A.3a| | 27 |
| Nearside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 27 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 27 |
| Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 27 |
| Offside Inner Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 27 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 27 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 27 |
| Offside Front Side repeater incorrect colour |1.4.A.2f| | 27 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 27 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 27 |
| Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 27 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 27 |
| Offside Drag link end ball joint has excessive play |2.2.B.1f| | 27 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 27 |
| Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 27 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 27 |
| Nearside Front Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 27 |
| Nearside Outer Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 27 |
| Offside Rear Service brake indicates brake bind |3.7.D.2a| | 27 |
| Offside Rear Rear reflector missing |1.5.1a| | 27 |
| Nearside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 27 |
| Nearside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 27 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 27 |
| Offside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 27 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 27 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 27 |
| Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 27 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 27 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 27 |
| Offside Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 27 |
| Nearside Front Seat belt cut causing the fibres to separate |5.1.B.3a| | 27 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 27 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 27 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 27 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 27 |
| Rear rear brake excessively fluctuating |3.7.B.3| | 27 |
| Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 27 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 27 |
| Nearside Seat belt anchorage prescribed area is fractured |5.2.6| | 27 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 27 |
| Nearside Inner Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 27 |
| Offside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 27 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 26 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 26 |
| Offside Front Outer Track rod end ball joint has excessive play |2.2.B.1f| | 26 |
| Offside Front Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 26 |
| Nearside Obligatory mirror missing |3.3 |a|| | 26 |
| Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 26 |
| Front Horn not loud enough to be heard by another road user |1.6.2b| | 26 |
| Nearside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 26 |
| Nearside Front Macpherson strut insecure |2.4.G.1| | 26 |
| Nearside Front Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 26 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 26 |
| All direction indicators not working (4.4.1 (a) (ii)) | 26 |
| Central Front Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 26 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 26 |
| Rear Prop shaft joint excessively worn (6.1.7 (c) (i)) | 26 |
| Nearside Passenger`s seat insecure |6.2.A.1| | 26 |
| Nearside brake disc excessively pitted |3.5.1h| | 26 |
| Nearside Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 26 |
| Rear Brake load sensing valve has been disconnected and was fitted as standard |3.6.E.2| | 26 |
| Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 26 |
| Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 26 |
| Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 26 |
| Offside Leaf spring fractured |2.4.B.1a| | 26 |
| Nearside Rear Front wheel bearing rough when rotated |2.5.A.2| | 26 |
| Offside Rear Leaf spring main leaf fractured |5.3.1 |b| |ii|| | 26 |
| Offside Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 26 |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 26 |
| Fuel pipe insecure |7.2.1| | 26 |
| Nearside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 26 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 26 |
| Offside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 26 |
| Nearside Rear Leaf spring shackle bracket loose |2.4.B.6a| | 26 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 26 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 26 |
| Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 26 |
| Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 26 |
| Nearside Rear front brake recording little or no effort |3.7.B.5a| | 26 |
| Nearside Rear Leaf spring fractured |5.3.1 |b| |i|| | 26 |
| Nearside Rear front brake binding |3.7.B.1| | 26 |
| Offside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 26 |
| Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 26 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 26 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 26 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 26 |
| Offside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 26 |
| Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 26 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 26 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 26 |
| Nearside Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 26 |
| Offside Rear Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 26 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 26 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 26 |
| Nearside Outer Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 26 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 25 |
| Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 25 |
| Centre Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 25 |
| Centre Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 25 |
| Offside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 25 |
| Offside Side repeater not working |4.4.1 |a| |ii|| | 25 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 25 |
| Nearside Front brake caliper securing device loose |3.5.1j| | 25 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 25 |
| Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 25 |
| Nearside Rear Shock absorber detached |2.7.2b| | 25 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 25 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 25 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 25 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 25 |
| Suspension arm has excessive play in a ball joint |2.4.G.2| | 25 |
| Offside Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 25 |
| Offside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 25 |
| Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 25 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 25 |
| Nearside Outer Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 25 |
| Power steering component leaking |2.1.5 |a|| | 25 |
| Offside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 25 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 25 |
| Nearside Front Outline marker lamp not working |4.2.1 |a|| | 25 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 25 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 25 |
| Offside Outer Front constant velocity joint is insecure |2.5.C.1b| | 25 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 25 |
| Offside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 25 |
| Offside Rear Outline marker lamp not working |4.2.1 |a|| | 25 |
| Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 25 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 25 |
| Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 25 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 25 |
| Offside Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 25 |
| Nearside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 25 |
| Nearside Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 25 |
| Nearside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 25 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 25 |
| Nearside Direction indicator incorrect colour |1.4.A.2f| | 25 |
| Nearside Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 25 |
| Offside Rear Leaf spring anchor bracket loose |2.4.B.6a| | 25 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 25 |
| Nearside Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 25 |
| Offside Outer Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 25 |
| Offside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 24 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 24 |
| Front front brake binding |3.7.B.1| | 24 |
| Rear Anti-roll bar insecure |2.4.G.1| | 24 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 24 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 24 |
| Rear Brake load sensing valve defective and function impaired |3.6.E.3| | 24 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 24 |
| Nearside Rear Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 24 |
| Nearside Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 24 |
| Towbar component excessively corroded |6.6.1| | 24 |
| Nearside Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 24 |
| Offside Front Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 24 |
| Access panel cannot be secured in the closed position |6.4.1| | 24 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 24 |
| Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 24 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 24 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 24 |
| Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 24 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 24 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 24 |
| Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 24 |
| Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 24 |
| Offside Headlamp incorrect colour |1.7.5b| | 24 |
| Offside Front Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 24 |
| Horn sound not in accordance with requirements |7.7 |c|| | 24 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 24 |
| Fuel cap/sealing device missing |6.1.3 |b| |i|| | 24 |
| Offside Front Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 24 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 24 |
| Indicator switch faulty |1.4.A.1| | 24 |
| Nearside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 24 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 24 |
| Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 24 |
| Offside Front Horn not working |1.6.2a| | 24 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 24 |
| Offside Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 24 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 24 |
| Nearside Front Fuel tank insecure |7.2.1| | 24 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 24 |
| Nearside Headlamp levelling device inoperative |4.1.5 |a|| | 24 |
| Offside Front Body panel corroded and likely to cause injury wing |6.2.1 |a| |i|| | 24 |
| Offside Front Side repeater not working (4.4.1 (a) (ii)) | 24 |
| Anti-roll bar linkage insecure |2.4.G.1| | 24 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 24 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 24 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 24 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 24 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 24 |
| Offside Rear Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 24 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 24 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 24 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 24 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 24 |
| Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 24 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 24 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 24 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 24 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 23 |
| Offside Rear Dropside cannot be secured in the closed position |6.4.1| | 23 |
| Front Power steering component|s| leaking |2.3.3b| | 23 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 23 |
| Nearside Rear Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 23 |
| Offside Front Seat belt affected by a damaged seat frame |5.2.1b| | 23 |
| Body has a projection caused by corrosion |6.1.C.1| | 23 |
| Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 23 |
| Nearside Headlamp aim beam image too far to the left |1.6.B4| | 23 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 23 |
| Offside Rear front brake binding |3.7.B.1| | 23 |
| Nearside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 23 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 23 |
| Nearside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 23 |
| Offside Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 23 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 23 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 23 |
| Rear Fuel tank insecure |7.2.1| | 23 |
| Fuel cap/sealing device sealing washer torn |7.2.4c| | 23 |
| Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 23 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 23 |
| Nearside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 23 |
| Nearside Front Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 23 |
| Centre Stop lamp not working |1.2.1b| | 23 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 23 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 23 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 23 |
| Offside Rear Parking brake lever has no reserve travel |3.1.6b| | 23 |
| Nearside Outline marker lamp not working |4.2.1 |a|| | 23 |
| Offside Front brake disc contaminated by oil |3.5.1h| | 23 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 23 |
| Exhaust system insecure (6.1.2 (a)) | 23 |
| Nearside Front Radius arm has excessive play in a pin/bush |2.4.G.2| | 23 |
| Offside Front Radius arm has excessive play in a pin/bush |2.4.G.2| | 23 |
| Nearside Seat belt insecurely fixed to the seat |5.2.1a| | 23 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 23 |
| Nearside Headlamp incorrect colour |1.7.5b| | 23 |
| Nearside Rear Passenger`s seat insecure |6.2.A.1| | 23 |
| Nearside Inner Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 23 |
| Nearside Inner Ball joint has excessive play |2.2.B.1f| | 23 |
| Nearside Shock absorber has a serious fluid leak |2.7.3| | 23 |
| Centre Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 23 |
| Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 23 |
| Offside Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 23 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 23 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 23 |
| Offside Front Steering rack gaiter insecure |2.2.D.2d| | 23 |
| Offside Body has a sharp edge caused by damage mirror |6.1.C.1| | 23 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 23 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 23 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 23 |
| Offside Inner Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 23 |
| Offside Front brake disc excessively pitted |3.5.1g| | 23 |
| Rear Body has a projection caused by corrosion |6.1.C.1| | 23 |
| Fuel tank insecure strap broken |7.2.1| | 23 |
| Front Upper Front position lamp|s| not working |1.1.A.3b| | 23 |
| Nearside Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 23 |
| Offside brake disc excessively scored |3.5.1h| | 23 |
| Nearside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 23 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 23 |
| Front Service brake application uneven across the axle |3.7.D.2b| | 23 |
| Nearside Front Side repeater insecure |1.4.A.2b| | 23 |
| Rear Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 23 |
| Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 23 |
| Nearside Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 23 |
| Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 23 |
| Front Body has a projection caused by damage |6.1.C.1| | 23 |
| Nearside Rear Rear position lamp|s| insecure |1.1.A.3a| | 22 |
| Offside Rear front brake recording little or no effort |3.7.B.5a| | 22 |
| Nearside Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 22 |
| Offside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 22 |
| Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour (8.2.2.2 (d)) | 22 |
| Nearside Position lamp not working |4.2.1 |a|| | 22 |
| Nearside Leaf spring eye defective |anchor| |2.4.B.1b| | 22 |
| Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 22 |
| Stop lamp not working all |1.2.1b| | 22 |
| Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 22 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 22 |
| Indicator tell tale inoperative |1.4.A.2a| | 22 |
| Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 22 |
| Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 22 |
| Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 22 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 22 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 22 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 22 |
| Offside Front Windscreen wiper blade missing |8.2.2| | 22 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Power steering pipe/hose leaking |2.1.5 |a|| | 22 |
| Rear Exhaust system insecure |6.1.2 |a|| | 22 |
| Offside Front Headlamp not in good working order |not working| |1.2.4a| | 22 |
| Nearside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 22 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 22 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 22 |
| Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 22 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 22 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 22 |
| Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 22 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 22 |
| Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 22 |
| Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 22 |
| Centre Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 22 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 22 |
| Nearside Outline marker lamp not working (4.2.1 (a) (ii)) | 22 |
| Nearside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 22 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 22 |
| Offside Rear Shock absorber detached |2.7.2b| | 22 |
| Nearside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 22 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 22 |
| Rear brake excessively fluctuating | 22 |
| Offside Rear Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 22 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 22 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 22 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 22 |
| Offside Steering pivot point has excessive play |2.2.B.1g| | 22 |
| Nearside Brake cable insecure |3.5.1d| | 22 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 22 |
| Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 22 |
| Rear rear brake grabbing severely |3.7.A.5b| | 22 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 22 |
| Nearside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 22 |
| Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 22 |
| Rear engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 22 |
| Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 22 |
| Centre Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 22 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 22 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 22 |
| Electrical wiring damaged and bare wires exposed |1.9.2c| | 22 |
| Nearside Front Side repeater not working (4.4.1 (a) (ii)) | 21 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 21 |
| All outline marker lamps not working (4.2.1 (a) (ii)) | 21 |
| Offside Upper Rear position lamp|s| not working |1.1.A.3b| | 21 |
| Nearside Front Upper Outline marker lamp not working |4.2.1 |a|| | 21 |
| Nearside Side repeater missing (4.4.1 (a) (ii)) | 21 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 21 |
| Centre Brake pipe inadequately supported |3.6.B.1| | 21 |
| Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 21 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 21 |
| Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Nearside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 21 |
| Power steering component|s| leaking steering rack |2.3.3b| | 21 |
| Nearside Outer Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 21 |
| Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 21 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 21 |
| Ball joint has excessive play |2.2.B.1f| | 21 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 21 |
| Offside brake disc excessively pitted |3.5.1h| | 21 |
| Nearside Inner Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 21 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Offside Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 21 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Nearside Rear Parking brake lever has no reserve travel |3.1.6b| | 21 |
| Offside Outline marker lamp not working |4.2.1 |a|| | 21 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Offside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 21 |
| Nearside Front Outer Track rod end ball joint has excessive play |2.2.B.1f| | 21 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 21 |
| Main beam `tell-tale` not working |1.7.4c| | 21 |
| Front Statutory seat belt missing |5.1.1| | 21 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 21 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 21 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 21 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 21 |
| Nearside Rear rear brakes release unevenly |3.7.B.4| | 21 |
| Nearside Body has a sharp edge caused by damage mirror |6.1.C.1| | 21 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 21 |
| Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 21 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 21 |
| Offside Front Headlamp aim beam image too far to the right |1.6.B4| | 21 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Offside Rear Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 21 |
| Nearside Rear front parking brake recording little or no effort |3.7.B.6a| | 21 |
| Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 21 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 21 |
| Offside Headlamp not in a clean condition affecting beam image |1.2.4a| | 21 |
| Nearside Front Service brake lagging in operation |1.2.1 |d|| | 21 |
| Offside Front Outline marker lamp not working |4.2.1 |a|| | 21 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 21 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 21 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 21 |
| Offside Inner Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
| Steering component is not secure to the vehicle structure |2.2.B.1a| | 21 |
| Passenger`s seat insecure |6.2.A.1| | 21 |
| Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 20 |
| Offside Inner Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 20 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
| Nearside Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 20 |
| Rear wheel bearing rough when rotated |2.6.1| | 20 |
| Nearside Rear Upper Shock absorber insecure |2.7.2b| | 20 |
| Nearside Outer Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 20 |
| Nearside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 20 |
| Rear Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 20 |
| Rear Direction indicator not working |1.4.A.2c| | 20 |
| Offside Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 20 |
| Offside Rear Service brake lagging in operation |1.2.1 |d|| | 20 |
| Rear Direction indicators not working |1.4.A.2c| | 20 |
| Rear Brake cable has restricted free movement |3.5.1k| | 20 |
| Offside Body has a projection caused by damage |6.1.C.1| | 20 |
| Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 20 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 20 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 20 |
| Offside Front Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 20 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 20 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 20 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 20 |
| Offside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 20 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 20 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 20 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 20 |
| Nearside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 20 |
| Offside Front Position lamp not working |4.2.1 |a| |ii|| | 20 |
| Nearside Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 20 |
| Nearside Headlamp not in good working order affecting the beam image |1.2.4a| | 20 |
| Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 20 |
| Rear Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 20 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 20 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 20 |
| Offside Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 20 |
| Offside Rear Passenger`s seat insecure |6.2.A.1| | 20 |
| Brake pipe fouled by moving parts |3.6.B.2a| | 20 |
| Nearside Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 20 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 20 |
| Brake valve damaged |3.6.A.2c| | 20 |
| Nearside Outer Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 20 |
| Front Bumper insecure |6.1.4 |a| |i|| | 20 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 20 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 20 |
| Rear position lamp|s| insecure |1.1.A.3a| | 20 |
| Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 20 |
| Nearside Front Brake pipe fouled by moving parts |3.6.B.2a| | 20 |
| Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 20 |
| Position lamp switch insecure |1.1.A.1| | 20 |
| Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 20 |
| Nearside Rear Rear reflector missing |1.5.1a| | 20 |
| Offside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 20 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 20 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 20 |
| Offside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 20 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 20 |
| Nearside Rear Leaf spring splayed and fouling |2.4.B.1c| | 20 |
| Rear Brake valve has an excessive discharge of oil |3.6.E.1| | 20 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 20 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 20 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 20 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 20 |
| Nearside Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 20 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 20 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 20 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 20 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 20 |
| Front Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 20 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 20 |
| Offside Rear Seat belt insecurely fixed to the seat |5.2.1a| | 20 |
| Offside Rear Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 20 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 19 |
| Rear Shock absorber has an excessively worn bush |2.7.4| | 19 |
| Offside Rear Brake cable locking device insecure |3.5.1l| | 19 |
| Offside Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 19 |
| Centre Rear Brake pipe inadequately clipped |3.6.B.1| | 19 |
| Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 19 |
| Parking brake: efficiency below requirements (3.7.B.7) | 19 |
| Rear Service brake excessively fluctuating |1.2.1 |e|| | 19 |
| Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 19 |
| Offside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 19 |
| Nearside Front Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 19 |
| Offside Front Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 19 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 19 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 19 |
| Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 19 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 19 |
| Offside Front Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 19 |
| Nearside Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 19 |
| Nearside Rear Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 19 |
| Offside Rear Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 19 |
| Offside Front brake caliper securing device missing |3.5.1j| | 19 |
| Offside Front Seat belt damaged (7.1.2 (b) (i)) | 19 |
| Nearside Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 19 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 19 |
| Parking brake not fitted on at least two wheels |3.1.1| | 19 |
| Nearside Front Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 19 |
| Nearside Front Fuel system component leaking |7.2.3| | 19 |
| Offside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 19 |
| Offside Outline marker lamp not working (4.2.1 (a) (ii)) | 19 |
| Nearside Rear Electrical wiring insecure |1.9.2a| | 19 |
| Offside Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 19 |
| Nearside Front brake disc excessively pitted |3.5.1g| | 19 |
| Centre Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 19 |
| Rear Towbar component insecure |6.6.1| | 19 |
| Nearside Steering rack damaged and unserviceable |2.2.C.1d| | 19 |
| Nearside Outer Front constant velocity joint is insecure |2.5.C.1b| | 19 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 19 |
| Front Fuel system component insecure |7.2.1| | 19 |
| Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 19 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 19 |
| Offside Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 19 |
| Brake fluid contaminated |1.8 |a|| | 19 |
| Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 19 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 19 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 19 |
| Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 19 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 19 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 19 |
| Offside Front Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 19 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 19 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 19 |
| Stop lamp(s) not working (4.3.1 (a) (ii)) | 19 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 19 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 19 |
| Offside Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 19 |
| Offside Inner Front brake disc excessively pitted |3.5.1h| | 19 |
| Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 19 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 19 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 19 |
| Nearside Rear Track rod end ball joint has excessive play |2.2.B.1f| | 19 |
| Central Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 19 |
| Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 19 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 19 |
| Nearside Rear Upper Anti-roll bar linkage insecure |2.4.G.1| | 19 |
| Centre Obligatory mirror missing |8.1.1| | 19 |
| Offside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 19 |
| Nearside Front Radius arm has excessive play in a ball joint |2.4.G.2| | 19 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 19 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 18 |
| Nearside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 18 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 18 |
| Nearside Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 18 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 18 |
| Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 18 |
| Offside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 18 |
| Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 18 |
| Offside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 18 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 18 |
| Centre Parking brake lever has no reserve travel |3.1.6b| | 18 |
| Oil leaking continuously from engine posing a serious risk to road safety |8.4.1 |a| |ii|| | 18 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 18 |
| Offside Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 18 |
| Bootlid cannot be secured in the closed position |6.4.1| | 18 |
| Offside Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 18 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 18 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 18 |
| Nearside Front Rear position lamp|s| not working |1.1.A.3b| | 18 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 18 |
| Brake valve corroded and excessively weakened |3.6.A.2b| | 18 |
| Offside Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 18 |
| Offside Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 18 |
| Nearside Rear position lamp|s| does not face the rear |1.1.A.3a| | 18 |
| Offside Obligatory mirror missing (3.3 (a)) | 18 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 18 |
| Nearside Rear Anti-roll bar linkage fractured |2.4.G.1| | 18 |
| Nearside Rear Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 18 |
| Offside Rear position lamp|s| missing |1.1.A.3a| | 18 |
| Headlamp switch insecure |1.7.1| | 18 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 18 |
| Steering rack damaged and unserviceable |2.2.C.1d| | 18 |
| Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 18 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 18 |
| Offside Front Hazard warning lamps inoperative |1.4.B.1b| | 18 |
| Centre Front Parking brake lever has no reserve travel |3.1.6b| | 18 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 18 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 18 |
| Front Brake performance not tested |3.7.A.1| | 18 |
| Nearside Rear Front wheel bearing has excessive play |2.5.A.3c| | 18 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 18 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 18 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 18 |
| Nearside Front Road wheel distorted |4.2.A.1a| | 18 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 18 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 18 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
| Offside Front Macpherson strut insecure |2.4.G.1| | 18 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 18 |
| Power steering pump insecure |2.3.6| | 18 |
| Nearside Front front brake grabbing severely |3.7.A.2b| | 18 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 18 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 18 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 18 |
| Nearside Front Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 18 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 18 |
| Nearside Rear Lower Shock absorber insecure |2.7.2b| | 18 |
| Front Front position lamp|s| incorrect colour |1.1.A.3e| | 18 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 18 |
| Vehicle Identification Number not legible |6.3.5.a| | 18 |
| Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 18 |
| Nearside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 18 |
| Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 18 |
| Nearside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 18 |
| Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 18 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 18 |
| Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 18 |
| Nearside Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 18 |
| Nearside Inner Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 18 |
| Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 18 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 18 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 18 |
| Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 18 |
| Front Service brake excessively fluctuating |1.2.1 |e|| | 18 |
| Brake lever has restricted free movement |3.5.1k| | 18 |
| Nearside Brake pipe leaking |3.6.A.1| | 18 |
| Offside Rear Front wheel bearing rough when rotated |2.5.A.2| | 18 |
| Nearside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 17 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 17 |
| Horn not working (1.6.2a) | 17 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 17 |
| Offside Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 17 |
| Nearside Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 17 |
| Rear Shock absorber has a serious fluid leak both |2.7.3| | 17 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 17 |
| Nearside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 17 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 17 |
| Power steering ram|s| leaking from a failed seal |2.3.3b| | 17 |
| Offside Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 17 |
| Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 17 |
| Offside Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 17 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 17 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 17 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
| Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 17 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
| Nearside Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 17 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 17 |
| Nearside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 17 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 17 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 17 |
| Nearside Front Brake hose bulging under pressure |3.6.B.3| | 17 |
| Parking brake lever ratchet mechanism is excessively worn |3.1.5| | 17 |
| Rear Hazard warning lamps inoperative |1.4.B.1b| | 17 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 17 |
| Offside Direction indicator incorrect colour |1.4.A.2f| | 17 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 17 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 17 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 17 |
| Offside Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 17 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 17 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 17 |
| Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 17 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 17 |
| Nearside Front Headlamp aim beam image too far to the right |1.6.B4| | 17 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 17 |
| Nearside Rear Brake hose excessively damaged |3.6.B.4d| | 17 |
| Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 17 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 17 |
| Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 17 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 17 |
| Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 17 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 17 |
| Offside Front Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 17 |
| Nearside Rear Road wheel badly damaged |4.2.A.1a| | 17 |
| Offside Front Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 17 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 17 |
| Nearside Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 17 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 17 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 17 |
| Nearside Front constant velocity joint is excessively worn |2.5.C.1b| | 17 |
| Offside Front Power steering component|s| leaking |2.3.3b| | 17 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 17 |
| Front Bonnet cannot be secured in the closed position |8.4.1| | 17 |
| Nearside Parking brake lever has no reserve travel |3.1.6b| | 17 |
| Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 17 |
| Driver`s door does not latch securely closed |6.2.B.1a| | 17 |
| Nearside Towbar retaining device missing |6.6.3a| | 17 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 17 |
| Offside Front Suspension arm insecure |2.4.G.1| | 17 |
| Power steering malfunctioning |2.1.5 |a|| | 17 |
| Swivelling towbar swivel pin retaining device missing |6.6.5c| | 17 |
| Nearside Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 17 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 17 |
| Offside Rear fog lamp missing |1.3.2a| | 17 |
| Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 17 |
| Offside Inner Ball joint has excessive play |2.2.B.1f| | 17 |
| Offside Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 17 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 17 |
| Nearside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 17 |
| Nearside Front Upper Position lamp not working |4.2.1 |a|| | 17 |
| Offside Front Upper Position lamp not working |4.2.1 |a|| | 17 |
| Rear fog lamp does not emit a steady red light |1.3.2e| | 17 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 17 |
| Offside Inner Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 17 |
| Offside Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 17 |
| Nearside Rear Seat belt insecurely fixed to the seat |5.2.1a| | 17 |
| Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 17 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 17 |
| Offside Front Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 17 |
| Nearside brake disc excessively scored |3.5.1h| | 17 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 17 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 17 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
| Nearside Front Shock absorber insecure |2.7.2b| | 17 |
| Nearside Front Dropside cannot be secured in the closed position |6.4.1| | 17 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 17 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 17 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
| Offside Rear Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 17 |
| Offside Rear Wheel nut|s| loose |4.2.A.1e| | 17 |
| Rear Stop lamp not working both |1.2.1b| | 17 |
| Offside Power steering pipe|s| or hose|s| leaking |2.3.3b| | 17 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 16 |
| Brake pipe inadequately clipped front to rear |3.6.B.1| | 16 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 16 |
| Offside Front constant velocity joint is excessively worn |2.5.C.1b| | 16 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 16 |
| Front Fuel hose leaking |7.2.3| | 16 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 16 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 16 |
| Power steering malfunctioning (2.1.5 (a)) | 16 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 16 |
| Nearside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
| Offside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 16 |
| Nearside Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 16 |
| Nearside Rear Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 16 |
| Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 16 |
| Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 16 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 16 |
| Offside Front Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 16 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 16 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 16 |
| Offside Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 16 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 16 |
| Rear Hinged tailboard cannot be secured in the closed position |6.4.1| | 16 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting |2.4.A.3| | 16 |
| Nearside Inner Front brake disc excessively pitted |3.5.1h| | 16 |
| Nearside Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 16 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 16 |
| Nearside Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 16 |
| Nearside Front Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 16 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 16 |
| Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 16 |
| Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 16 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 16 |
| Nearside Headlamp not in a clean condition affecting beam image |1.2.4a| | 16 |
| Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 16 |
| Nearside Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 16 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 16 |
| Nearside Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 16 |
| Electrical wiring inadequately supported |1.9.2a| | 16 |
| Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 16 |
| Rear Brake pipe leaking |3.6.A.1| | 16 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 16 |
| brake disc excessively scored |3.5.1h| | 16 |
| Front passenger door does not latch securely closed |6.2.B.1a| | 16 |
| Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 16 |
| Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 16 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 16 |
| Nearside Front Fluid suspension unit leaking |2.4.D.2| | 16 |
| Nearside Rear Lower Loading door cannot be secured in the closed position |6.4.1| | 16 |
| Offside Power steering component|s| leaking |2.3.3b| | 16 |
| Exhaust system insecure |6.1.2 |a|| | 16 |
| Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 16 |
| Nearside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
| Centre Front Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 16 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 16 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 16 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 16 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 16 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 16 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 16 |
| Offside Front Seat belt damaged |7.1.2 |b| |i|| | 16 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 16 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 16 |
| Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 16 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 16 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 16 |
| Offside Front Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 16 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 16 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 16 |
| Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 16 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 16 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 16 |
| Offside Headlamp not in good working order affecting the beam image |1.2.4a| | 16 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 16 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 16 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 16 |
| Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 16 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 16 |
| Engine MIL inoperative or indicates a malfunction |8.2.2.2 |g|| | 16 |
| Nearside Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 16 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 16 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 16 |
| Nearside Rear Upper Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 16 |
| Brake cable insecure |3.5.1d| | 16 |
| Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 16 |
| Hazard warning switch insecure |1.4.B.1d| | 16 |
| Offside Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 16 |
| Nearside Front Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 16 |
| Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 16 |
| Offside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 16 |
| Nearside Headlamp not working on dipped beam |1.2.4a| | 16 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 16 |
| Offside Headlamp levelling device inoperative |4.1.5 |a|| | 16 |
| Offside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 16 |
| Offside Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 16 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 16 |
| Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 16 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 16 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 16 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 16 |
| Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 16 |
| Seat belt affected by an insecure seat fixing |5.2.1b| | 16 |
| Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 16 |
| Offside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 16 |
| Offside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 16 |
| Offside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 16 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 16 |
| Offside Brake cable insecure |3.5.1d| | 16 |
| Offside Rear Tie bar/rod insecure |2.4.G.1| | 16 |
| Offside Front Anti-roll bar fractured |2.4.G.1| | 15 |
| Offside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 15 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 15 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 15 |
| Front Hazard warning switch faulty |1.4.B.1d| | 15 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 15 |
| Rear wheel bearing has excessive play |2.6.2| | 15 |
| Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 15 |
| Offside Obligatory mirror missing |3.3 |a|| | 15 |
| Offside Rear fog lamp flickers when tapped lightly by hand |1.1.6d| | 15 |
| Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 15 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
| Nearside Brake pipe inadequately clipped |3.6.B.1| | 15 |
| Offside Front Upper Outline marker lamp not working |4.2.1 |a|| | 15 |
| Nearside Rear Outline marker lamp missing |4.2.1 |a|| | 15 |
| Offside Rear Outline marker lamp missing |4.2.1 |a|| | 15 |
| Offside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 15 |
| Nearside Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 15 |
| Rear Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 15 |
| Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
| Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 15 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 15 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 15 |
| Offside Rear front parking brake recording little or no effort |3.7.B.6a| | 15 |
| Centre Front Horn not working |1.6.2a| | 15 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 15 |
| Nearside Rear Rear position lamp|s| missing |1.1.A.3a| | 15 |
| Offside Rear Lower Anti-roll bar locating pin insecure |2.4.G.3a| | 15 |
| Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 15 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 15 |
| Offside Rear Front wheel bearing has excessive play |2.5.A.3c| | 15 |
| Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
| Nearside Front rear brake recording little or no effort |3.7.B.5a| | 15 |
| Nearside Anti-roll bar linkage insecure |2.4.G.1| | 15 |
| Offside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 15 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 15 |
| Offside Front Steering pivot point has excessive play |2.2.B.1g| | 15 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 15 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 15 |
| Brake pump/compressor leaking |3.6.A.1| | 15 |
| Brake load sensing valve linkage obviously incorrectly adjusted |1.1.17 |b|| | 15 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 15 |
| Offside Rear fog lamp not in good working order |not working| |1.1.6b| | 15 |
| Nearside Inner Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 15 |
| Offside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 15 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 15 |
| Nearside Rear Brake drum contaminated (1.1.14 (b)) | 15 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 15 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 15 |
| Front Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 15 |
| Nearside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 15 |
| Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 15 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 15 |
| Offside Rear Anti-roll bar linkage missing |2.4.G.1| | 15 |
| Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 15 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 15 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 15 |
| Windscreen in an unacceptable condition |3.2 |c| |i|| | 15 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 15 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 15 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 15 |
| Centre Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 15 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 15 |
| Offside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 15 |
| Brake cable locking device insecure |3.5.1l| | 15 |
| Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 15 |
| Nearside Rear Upper Brake load sensing valve linkage seized |3.6.E.3| | 15 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 15 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 15 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 15 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 15 |
| Offside Rear Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 15 |
| Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 15 |
| Nearside Front Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 15 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 15 |
| Rear Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 15 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 15 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 15 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 15 |
| Offside Rear rear brakes release unevenly |3.7.B.4| | 15 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 15 |
| Nearside Front Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 15 |
| Power steering component leaking steering rack (2.1.5 (a)) | 15 |
| Centre Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
| Nearside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 15 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 15 |
| Offside Front Service brake indicates brake bind |3.7.D.2a| | 15 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 15 |
| Nearside Brake pipe inadequately supported |3.6.B.1| | 15 |
| Offside Rear Upper Shock absorber insecure |2.7.2b| | 15 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 15 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 15 |
| Offside Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 15 |
| Nearside Rear Electrical wiring inadequately supported |1.9.2a| | 15 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 15 |
| Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 15 |
| Nearside Obligatory mirror seriously damaged affecting the rear view |6.6.1b| | 15 |
| Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) | 15 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 15 |
| Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 15 |
| Nearside Front Lower Radius arm has excessive play in a ball joint |2.4.G.2| | 15 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 15 |
| Nearside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 15 |
| Offside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 15 |
| Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 15 |
| Rear Rear fog lamp emits a light other than red |1.3.2e| | 15 |
| Position lamp switch faulty |1.1.A.1| | 15 |
| Nearside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 15 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 15 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 15 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 15 |
| Offside Front Headlamp levelling device inoperative (4.1.5 (a)) | 14 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 14 |
| Front Bumper insecure (6.1.4 (a) (i)) | 14 |
| Front Braking system leaking |3.6.A.1| | 14 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 14 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 14 |
| Nearside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 14 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 14 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 14 |
| Bonnet primary retaining device ineffective (3.1 (c)) | 14 |
| Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 14 |
| Nearside Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 14 |
| Offside Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 14 |
| Rear Rear wheel bearing has excessive play |2.6.2| | 14 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 14 |
| Nearside Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 14 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 14 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 14 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 14 |
| Offside Front Brake pipe kinked |3.6.B.2b| | 14 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Nearside Rear reflector more than 50% obscured |1.5.1b| | 14 |
| Nearside Inner Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 14 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 14 |
| Nearside Rear Upper Rear position lamp|s| incorrect colour |1.1.A.3e| | 14 |
| Rear Electrical wiring inadequately supported |1.9.2a| | 14 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 14 |
| Offside engine mounting bracket insecure and likely to fail |6.1.D.1b| | 14 |
| Offside Inner Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 14 |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 14 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 14 |
| Nearside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Offside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 14 |
| Nearside Front position lamp|s| missing |1.1.A.3a| | 14 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 14 |
| All outline marker lamps not working |4.2.1 |a|| | 14 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 14 |
| Nearside Outer Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 14 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 14 |
| Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 14 |
| Nearside Front brake disc excessively worn |3.5.1g| | 14 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 14 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 14 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 14 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 14 |
| Nearside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 14 |
| Offside Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 14 |
| Offside Statutory seat belt missing |5.1.1| | 14 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 14 |
| Offside Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 14 |
| Offside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 14 |
| Offside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 14 |
| Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 14 |
| Nearside Rear Brake cable locking device missing |3.5.1l| | 14 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 14 |
| Offside Outer Rear position lamp|s| not working |1.1.A.3b| | 14 |
| Offside Front Driver`s seat insecure |6.2.5 |a| |ii|| | 14 |
| Offside Towbar retaining device missing |6.6.3a| | 14 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 14 |
| Offside Front Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 14 |
| Nearside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 14 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 14 |
| Nearside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 14 |
| Rear Electrical wiring damaged and bare wires exposed |1.9.2c| | 14 |
| Offside Steering rack damaged and unserviceable |2.2.C.1d| | 14 |
| Offside Rear Rear position lamp|s| missing |1.1.A.3a| | 14 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 14 |
| Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Brake warning device not working correctly |3.3.D.3a| | 14 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 14 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 14 |
| Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 14 |
| Nearside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 14 |
| Offside Seat belt insecurely fixed to the seat |5.2.1a| | 14 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 14 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 14 |
| Nearside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 14 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 14 |
| Nearside Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 14 |
| Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 14 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 14 |
| Offside Front Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 14 |
| Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 14 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 14 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 14 |
| Driver`s door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 14 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 14 |
| Offside Headlamp insecure (4.1.1 (c)) | 14 |
| Nearside Front Electrical wiring insecure |1.9.2a| | 14 |
| Driver`s door hinge insecure |6.2.B.2| | 14 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 14 |
| Offside Parking brake lever has no reserve travel |3.1.6b| | 14 |
| Nearside Front Headlamp aim beam image too far to the left |1.6.B4| | 14 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 14 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Offside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 14 |
| Offside Rear Leaf spring splayed and fouling |2.4.B.1c| | 14 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 14 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 14 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 14 |
| Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 14 |
| Offside Front Fuel system component leaking |7.2.3| | 14 |
| Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 14 |
| Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 14 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 14 |
| Nearside Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 14 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger |2.4.A.3| | 14 |
| Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 14 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 14 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 14 |
| Offside Brake pipe inadequately clipped |3.6.B.1| | 14 |
| Nearside Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 14 |
| Nearside Rear reflector not red in colour |1.5.1d| | 14 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 14 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Offside Front Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Offside Front Shock absorber insecure |2.7.2b| | 14 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 14 |
| Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 14 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 14 |
| Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 14 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 14 |
| Nearside Front Front position lamp|s| not in good working order |not working| |1.1.4a| | 14 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 14 |
| Offside Front engine mounting bracket insecure and likely to fail |6.1.D.1b| | 14 |
| Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 14 |
| Nearside Front Body component corroded and likely to cause injury wing (6.2.1 (a) (i)) | 14 |
| Nearside Front Body insecure and dangerous to other road users bumper |6.1.B.1b| | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 14 |
| Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
| Exhaust emissions exceed manufacturers specified limit 1.19 (8.2.2.2 (a)) | 14 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger |2.4.A.3| | 14 |
| Nearside Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 13 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 13 |
| Brake load sensing valve inoperative and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 13 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 13 |
| Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i)) | 13 |
| Offside Leaf spring eye defective |anchor| |2.4.B.1b| | 13 |
| Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 13 |
| Nearside Front Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 13 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 13 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 13 |
| Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 13 |
| Direction indicators not in good working order |function impaired| |1.5.A1b| | 13 |
| Towbar retaining device insecure |6.6.3a| | 13 |
| Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 13 |
| Nearside Upper Stop lamp not working |1.2.1b| | 13 |
| Offside Inner Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 13 |
| Offside Rear Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 13 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 13 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 13 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 13 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front hanger |2.4.A.3| | 13 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 13 |
| Fuel system component leaking (6.1.3 (b) (i)) | 13 |
| Nearside Front wheel bearing feels rough when rotated |2.5.A.2| | 13 |
| Power steering component leaking (2.1.5 (a)) | 13 |
| Nearside Front Road wheel fixing missing |5.2.1 |a| |i|| | 13 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 13 |
| Nearside Front Headlamp aim not tested (4.1.2 (b)) | 13 |
| Offside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 13 |
| Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 13 |
| Nearside Outer Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 13 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 13 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 13 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 13 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 13 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 13 |
| Nearside Steering pivot point has excessive play |2.2.B.1g| | 13 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 13 |
| Front Shock absorber has a serious fluid leak |2.7.3| | 13 |
| Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 13 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 13 |
| Offside Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 13 |
| Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 13 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 13 |
| Nearside Front Obligatory mirror missing (3.3 (a)) | 13 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 13 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 13 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 13 |
| Front Position lamp not working both (4.2.1 (a) (ii)) | 13 |
| Offside Rear Service brake grabbing severely (1.2.1 (c)) | 13 |
| Nearside Rear Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 13 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 13 |
| Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 13 |
| Rear Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 13 |
| Offside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 13 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 13 |
| Rear Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 13 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 13 |
| Rear Towbar component excessively corroded |6.6.1| | 13 |
| Rear Front position lamp|s| not working |1.1.A.3b| | 13 |
| Offside Rear Road wheel badly damaged |4.2.A.1a| | 13 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 13 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 13 |
| Nearside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 13 |
| Offside Position lamp not working (4.2.1 (a) (ii)) | 13 |
| Nearside Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 13 |
| Nearside Horn not working |1.6.2a| | 13 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 13 |
| Offside An item not tested |Manual| | 13 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 13 |
| Central Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 13 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 13 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 13 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 13 |
| Offside Rear rear parking |secondary| brake grabbing severely |3.7.B.6b| | 13 |
| Steering column retaining device insecure |2.1.6| | 13 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 13 |
| Offside Front brake disc excessively worn |3.5.1g| | 13 |
| Vehicle Identification Number incomplete |6.3.5a| | 13 |
| Offside Shock absorber has a serious fluid leak |2.7.3| | 13 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured |3.3.A.2| | 13 |
| Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 13 |
| Emergency exit sign missing |6.2.D.3| | 13 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 13 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 13 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 13 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 13 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 13 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 13 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 13 |
| Offside Front Drivers seat insecure (6.2.5 (a) (ii)) | 13 |
| Nearside Front Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 13 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 13 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 13 |
| Nearside Front Side repeater not working |4.4.1 |a| |ii|| | 13 |
| Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 13 |
| Offside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 13 |
| Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 13 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 13 |
| Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 13 |
| Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 13 |
| Drivers seat moving inadvertently (6.2.5 (b) (ii)) | 13 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 13 |
| Offside Front Suspension arm worn and seriously weakened |2.4.G.1| | 13 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 13 |
| Centre Rear Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 13 |
| Offside Rear Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 13 |
| Rear Brake load sensing valve obviously incorrectly adjusted |3.6.E.3| | 13 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 13 |
| Offside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 13 |
| Offside Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 13 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 13 |
| Trailer electrical socket wiring insulation damaged or deteriorated and likely to cause a short-circuit |4.10 |b| |ii|| | 13 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 13 |
| Offside Hinged tailboard cannot be secured in the closed position |6.4.1| | 13 |
| Nearside Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 13 |
| Trailer electrical socket wiring insulation damaged or deteriorated and likely to cause a short-circuit (4.10 (b) (ii)) | 13 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 13 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 13 |
| Nearside Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 13 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 13 |
| Steering column top bearing excessively worn |2.1.2c| | 13 |
| Offside Rear Rear fog lamp tell tale not working |1.3.1b| | 13 |
| Front Ball joint has excessive play |2.2.B.1f| | 13 |
| Offside Rear Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 13 |
| Nearside Rear Shock absorber has a serious fluid leak |2.6.3| | 13 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 13 |
| Nearside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 13 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 13 |
| Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 13 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 13 |
| Offside Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 13 |
| Nearside Front Seat belt affected by an insecure seat fixing |5.2.1b| | 13 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 13 |
| Rear Service brake: efficiency below requirements |3.7.B.7| | 13 |
| Offside Rear Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 13 |
| Nearside Outer Front Seat belt cut causing the fibres to separate |5.1.B.3a| | 13 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 13 |
| Nearside Rear Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 13 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 13 |
| Brake load sensing valve has been removed and was fitted as standard |3.6.E.2| | 13 |
| Nearside Inner Front Ball joint has excessive play |2.2.B.1f| | 13 |
| Headlamp aim not tested (4.1.2 (b)) | 13 |
| Offside Headlamp not working on dipped beam |1.2.4a| | 13 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 13 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 12 |
| Offside Obligatory mirror does not provide a view to the rear (3.3 (c)) | 12 |
| Centre Brake pipe leaking |3.6.A.1| | 12 |
| Rear fog lamp obviously incorrectly positioned |1.3.2a| | 12 |
| Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 12 |
| Nearside Front Service brake excessively fluctuating |1.2.1 |e|| | 12 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 12 |
| Offside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 12 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 12 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 12 |
| Offside Front Fluid suspension unit leaking |2.4.D.2| | 12 |
| Offside Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 12 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 12 |
| Centre Brake cable has wires broken and is significantly weakened |3.5.1b| | 12 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 12 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 12 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount |2.4.A.3| | 12 |
| Offside Rear fog lamp tell tale not working |1.3.1b| | 12 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 12 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 12 |
| Offside Rear reflector more than 50% obscured |1.5.1b| | 12 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 12 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 12 |
| Offside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 12 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 12 |
| Offside Front Body has a sharp edge caused by damage mirror |6.1.C.1| | 12 |
| Offside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 12 |
| Offside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 12 |
| Offside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 12 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 12 |
| Nearside Front Body has a sharp edge caused by corrosion Wing |6.1.C.1| | 12 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 12 |
| Offside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 12 |
| Offside Front Rear position lamp|s| not working |1.1.A.3b| | 12 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 12 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 12 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 12 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 12 |
| Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 12 |
| Direction indicator incorrect colour |1.4.A.2f| | 12 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 12 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.4d| | 12 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 12 |
| Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 12 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 12 |
| Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 12 |
| Nearside Rear rear parking |secondary| brake grabbing severely |3.7.B.6b| | 12 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 12 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 12 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 12 |
| Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 12 |
| Nearside Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 12 |
| Offside Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 12 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 12 |
| Nearside Rear Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 12 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 12 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Nearside Rear Torsion bar attachment bracket loose |2.4.E.4a| | 12 |
| Nearside Rear Tie bar/rod insecure |2.4.G.1| | 12 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 12 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 12 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 12 |
| Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 12 |
| Brake pedal anti-slip provision missing |1.1.2 |c|| | 12 |
| Brake fluid contaminated (1.8 (a)) | 12 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 12 |
| Nearside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 12 |
| Nearside Rear Service brake grabbing severely (1.2.1 (c)) | 12 |
| Service brake: efficiency below requirements (3.7.B.7) | 12 |
| Offside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 12 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Electrical wiring damaged, likely to cause a short |1.9.2b| | 12 |
| Nearside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 12 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 12 |
| Nearside Rear Upper Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 12 |
| Nearside Rear Lower Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 12 |
| Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 12 |
| Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 12 |
| Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 12 |
| Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 12 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 12 |
| Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 12 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 12 |
| Brake servo leaking |3.6.C.1c| | 12 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 12 |
| Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 12 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 12 |
| Driver`s view to front impaired by crack |6.9.1b| | 12 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 12 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 12 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 12 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 12 |
| Rear Body has a projection caused by damage |6.1.C.1| | 12 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 12 |
| Exhaust emits clearly visible black smoke during acceleration |7.4.A2| | 12 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 12 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 12 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 12 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 12 |
| Offside Rear Shock absorber has a serious fluid leak |2.6.3| | 12 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 12 |
| Nearside Rear Towbar component excessively corroded |6.6.1| | 12 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 12 |
| Rear Prop shaft joint excessively worn |6.1.7 |c| |i|| | 12 |
| Nearside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 12 |
| Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 12 |
| Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 12 |
| Offside Obligatory mirror insecure |3.3 |b| |ii|| | 12 |
| Offside Front Road wheel badly damaged |4.2.A.1a| | 12 |
| Nearside Front Front suspension retaining device missing |2.5.A.4| | 12 |
| rear brake recording little or no effort both |3.7.B.5a| | 12 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 12 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 12 |
| Offside Front Dropside cannot be secured in the closed position |6.4.1| | 12 |
| Offside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 12 |
| Front Parking brake lever has no reserve travel |3.1.6b| | 12 |
| Nearside Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 12 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 12 |
| Central Prop shaft bearing housing insecure |6.1.7 |f| |i|| | 12 |
| Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 12 |
| Centre Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 12 |
| Offside Front Direction indicator incomplete |1.5.A1b| | 12 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 12 |
| Offside Front Sub-frame severely distorted |2.4.G.1| | 12 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 12 |
| Nearside Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 12 |
| Central Prop shaft joint excessively worn (6.1.7 (c) (i)) | 12 |
| Front Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 12 |
| Nearside Rear Leaf spring shackle bracket damaged and seriously weakened |2.4.B.6d| | 12 |
| Nearside Front Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 12 |
| Offside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 12 |
| Nearside Inner Body has a projection caused by corrosion |6.1.C.1| | 12 |
| Offside Inner Body has a projection caused by corrosion |6.1.C.1| | 12 |
| Offside Outer Body has a projection caused by corrosion |6.1.C.1| | 12 |
| Centre Rear Brake load sensing valve seized |3.6.E.3| | 12 |
| Nearside Front Sub-frame severely distorted |2.4.G.1| | 12 |
| Nearside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 12 |
| Nearside Front Body has a projection caused by damage bumper |6.1.C.1| | 12 |
| Nearside Rear Hinged tailboard cannot be secured in the closed position |6.4.1| | 12 |
| Bonnet cannot be secured in the closed position |3.1 |b| |i|| | 12 |
| Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 12 |
| Nearside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 12 |
| Nearside Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 12 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush |5.3.4 |a| |i|| | 12 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 12 |
| Offside Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 12 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 12 |
| Nearside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 12 |
| Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 12 |
| Offside Outer Front Body has a sharp edge caused by corrosion |6.1.C.1| | 12 |
| Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 12 |
| Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 12 |
| Offside Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 12 |
| Nearside Rear Anti-roll bar linkage missing |2.4.G.1| | 12 |
| Offside Rear Brake pipe excessively chafed |3.6.B.2c| | 12 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 12 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 12 |
| Nearside Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 12 |
| Nearside Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 12 |
| Nearside passenger door cannot be opened from outside the vehicle side door |6.2.B.1c| | 12 |
| Rear Spare wheel carrier insecure |6.4.2| | 12 |
| Nearside Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 12 |
| Front Body insecure and dangerous to other road users bumper |6.1.B.1b| | 12 |
| Speed limiter plate missing |6.5.A.1a| | 12 |
| Offside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 12 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 12 |
| Nearside Outer Front constant velocity joint is excessively worn |2.5.C.1b| | 12 |
| Front Upper Fuel system component leaking |7.2.3| | 12 |
| Nearside Rear Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 12 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 12 |
| Nearside Front Anti-roll bar missing |2.4.G.1| | 12 |
| Nearside Brake cable locking device insecure |3.5.1l| | 12 |
| Nearside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Rear Seat belt insecurely fixed to the seat |5.2.1a| | 11 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 11 |
| Offside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Drivers seat with a defective structure (6.2.5 (a) (i)) | 11 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 11 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 11 |
| Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 11 |
| Offside Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 11 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner door step |5.2.6| | 11 |
| Nearside Rear Service brake: efficiency below requirements |3.7.B.7| | 11 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 11 |
| Nearside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 11 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 11 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 11 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 11 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step |7.1.1 |a| |i|| | 11 |
| Offside Rear Anti-roll bar linkage severely distorted |2.4.G.1| | 11 |
| Offside Obligatory mirror seriously damaged affecting the rear view |6.6.1b| | 11 |
| Offside Anti-roll bar linkage insecure |2.4.G.1| | 11 |
| Headlamps matched pair are incorrectly positioned |1.7.3| | 11 |
| Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 11 |
| Seat belt insecurely fixed to the seat |5.2.1a| | 11 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 11 |
| Front Exhaust mounting missing |7.1.1b| | 11 |
| Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 11 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 11 |
| Nearside Seat belt affected by an insecure seat fixing |5.2.1b| | 11 |
| Offside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 11 |
| Nearside Front Suspension arm severely distorted |2.4.G.1| | 11 |
| Offside Outer Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 11 |
| Exhaust emissions exceed level of metered smoke for a non-turbo charged engine |8.2.2.2 |b|| | 11 |
| Nearside Front Headlamp levelling device inoperative (4.1.5 (a)) | 11 |
| Offside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 11 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 11 |
| Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 11 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 11 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 11 |
| Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 11 |
| Offside Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 11 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 11 |
| Offside Rear Upper Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 11 |
| Shock absorber has an excessively worn bush |2.7.4| | 11 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 11 |
| Centre Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 11 |
| Offside Front Headlamp levelling device inoperative |4.1.5 |a|| | 11 |
| Offside Outer Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 11 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 11 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor |2.4.A.3| | 11 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 11 |
| Nearside Front Rear wheel bearing has excessive play |2.6.2| | 11 |
| Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 11 |
| Nearside Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 11 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Windscreen washer control is inaccessible to the driver |8.2.1a| | 11 |
| Nearside Power steering pipe|s| or hose|s| leaking |2.3.3b| | 11 |
| Offside Outer Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 11 |
| Centre Rear Brake pipe inadequately supported |3.6.B.1| | 11 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 11 |
| Rear Trailer electrical socket insecure |1.9.3a| | 11 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 11 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Power steering component leaking rack (2.1.5 (a)) | 11 |
| Nearside Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 11 |
| Nearside Fuel system component leaking |7.2.3| | 11 |
| Rear position lamp|s| not working both |1.1.A.3b| | 11 |
| Nearside Front Direction indicator missing |1.4.A.2b| | 11 |
| Nearside Front Headlamp levelling device inoperative |4.1.5 |a|| | 11 |
| Offside Front Wheel bolt|s| missing |4.2.A.1e| | 11 |
| Nearside Rear Lower passenger door does not latch securely closed |6.2.B.1a| | 11 |
| Nearside Outer Front Body has a sharp edge caused by corrosion |6.1.C.1| | 11 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Offside Rear Electrical wiring insecure |1.9.2a| | 11 |
| Offside Rear Rear fog lamp obviously incorrectly positioned |1.3.2a| | 11 |
| Offside Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear |8.1.2b| | 11 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 11 |
| Nearside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 11 |
| Nearside Fuel cap/sealing device missing |7.2.4a| | 11 |
| Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 11 |
| Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 11 |
| Offside Inner Front brake disc excessively scored |3.5.1h| | 11 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 11 |
| Offside Rear Brake lining(s) contaminated (1.1.13 (b)) | 11 |
| Nearside Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 11 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 11 |
| Offside Front Lower Radius arm has excessive play in a ball joint |2.4.G.2| | 11 |
| Horn control insecure |1.6.1| | 11 |
| Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 11 |
| Offside Rear Stop lamp not working |1.3.2a| | 11 |
| Trailer electrical socket likely to become detached (4.10 (a) (ii)) | 11 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 11 |
| Nearside Front Bonded suspension unit attachment loose |2.4.F.1a| | 11 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 11 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 11 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 11 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 11 |
| Nearside Front Suspension arm insecure |2.4.G.1| | 11 |
| Nearside passenger door cannot be opened from outside the vehicle sliding door |6.2.B.1c| | 11 |
| Headlamp not working on dipped beam both |1.7.5a| | 11 |
| Nearside Front Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 11 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 11 |
| Offside Outer Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 11 |
| Shock absorber has negligible damping effect |2.7.5| | 11 |
| Offside Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 11 |
| Nearside Rear Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 11 |
| Prop shaft bearing housing likely to fail |6.1.7 |f| |ii|| | 11 |
| Nearside Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 11 |
| Nearside Rear Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 11 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 11 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 11 |
| Nearside Front Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 11 |
| Offside Front Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 11 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 11 |
| Nearside Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 11 |
| Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 11 |
| Nearside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a| | 11 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 11 |
| Side repeater not working |1.4.A.2c| | 11 |
| Stop lamp|s| not working |4.3.1 |a| |ii|| | 11 |
| Nearside Steering rack insecure |2.2.B.1a| | 11 |
| Offside Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 11 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 11 |
| Centre Rear Exhaust system not adequately supported |7.1.1| | 11 |
| Nearside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 11 |
| Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 11 |
| Offside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 11 |
| Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 11 |
| Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 11 |
| Offside Headlamp aim not tested (4.1.2 (b)) | 11 |
| Nearside Front position lamp|s| insecure |1.1.A.3a| | 11 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 11 |
| Offside Side repeater missing (4.4.1 (a) (ii)) | 11 |
| Nearside Front Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 11 |
| Nearside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 11 |
| Nearside Rear Torsion bar excessive play at an end fixing |2.4.E.2| | 11 |
| Nearside Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 11 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 11 |
| Nearside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 11 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 11 |
| Centre Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 11 |
| Nearside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 11 |
| Nearside Rear wheel cylinder has restricted free movement |3.5.1k| | 11 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 11 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 11 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 11 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 11 |
| Driver`s door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 11 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 11 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 11 |
| Anti-lock braking system warning lamp sequence is incorrect |3.4.1d| | 11 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 11 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 11 |
| Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 11 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 11 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 11 |
| Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 11 |
| Offside Rear Brake hose excessively damaged |3.6.B.4d| | 11 |
| Brake pivot has restricted free movement |3.5.1k| | 11 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 11 |
| Brake load sensing valve linkage obviously incorrectly adjusted (1.1.17 (b)) | 11 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 11 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 11 |
| Offside Rear Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 11 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 11 |
| Nearside Outer Seat belt retracting mechanism defective |5.2.5b| | 11 |
| Nearside Front Rear wheel bearing rough when rotated |2.6.1| | 11 |
| Nearside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 11 |
| Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 11 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 11 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 11 |
| Offside Front Body insecure and dangerous to other road users bumper |6.1.B.1b| | 11 |
| Offside Front Steering rack damaged and unserviceable |2.2.C.1d| | 11 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 11 |
| Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 11 |
| Nearside Front Front position lamp|s| not working side light |1.1.A.3b| | 11 |
| Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 11 |
| Front Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 11 |
| Offside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Offside Rear Upper Front position lamp|s| not working |1.1.A.3b| | 11 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 11 |
| Nearside Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 11 |
| Nearside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 11 |
| Offside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 11 |
| Nearside Inner Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Steering locking device missing |2.2.C.1g| | 11 |
| Fuel tank insecure strap corroded |7.2.1| | 10 |
| Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Nearside Braking system leaking |3.6.A.1| | 10 |
| Nearside Front Passenger door cannot be opened from outside the vehicle |6.5.11a| | 10 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 10 |
| Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 10 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 10 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 10 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 10 |
| Rear passenger seat cannot be secured in the upright position. |6.2.3| | 10 |
| Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 10 |
| Offside Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 10 |
| Nearside Front Driver`s seat insecure |6.2.A.1| | 10 |
| Centre Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 10 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 10 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 10 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 10 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 10 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 10 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 10 |
| Offside Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 10 |
| Nearside Front Direction indicator insecure |1.4.A.2b| | 10 |
| Seat belt stitching badly frayed |5.2.2b| | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 10 |
| Offside Front wheel bearing feels rough when rotated |2.5.A.2| | 10 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 10 |
| Nearside Rear Anti-roll bar linkage severely distorted |2.4.G.1| | 10 |
| Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 10 |
| Offside Rear Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 10 |
| Nearside Front Seat belt damaged |7.1.2 |b| |i|| | 10 |
| Rear Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 10 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 10 |
| Nearside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 10 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 10 |
| Nearside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 10 |
| Offside Rear Brake drum contaminated |1.1.14 |b|| | 10 |
| Offside Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 10 |
| Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 10 |
| Offside Front Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 10 |
| Nearside Side repeater incorrect colour (4.4.3 (a)) | 10 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 10 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 10 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 10 |
| Rear Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 10 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 10 |
| Brake vacuum build up too slow |3.3.E.6| | 10 |
| Rear Direction indicators not in good working order |function impaired| |1.5.A1b| | 10 |
| Offside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 10 |
| Offside Front Front position lamp|s| not in good working order |not working| |1.1.4a| | 10 |
| Offside Front Body component corroded and likely to cause injury wing (6.2.1 (a) (i)) | 10 |
| Centre Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 10 |
| Offside Rear Upper Stop lamp not working |1.2.1b| | 10 |
| Offside Rear Service brake application uneven across the axle |3.7.D.2b| | 10 |
| Offside Front Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 10 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 10 |
| Nearside Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 10 |
| Nearside Side repeater flashing more than 120 times a minute |1.4.A.2g| | 10 |
| Offside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 10 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 10 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 10 |
| Offside Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 10 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 10 |
| Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 10 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 10 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 10 |
| Nearside Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 10 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 10 |
| Exhaust emissions exceed manufacturers specified limit 0.75 (8.2.2.2 (a)) | 10 |
| Offside Rear Torsion bar excessive play at an end fixing |2.4.E.2| | 10 |
| Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 10 |
| Nearside Headlamp aim not tested |4.1.2 |b|| | 10 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 10 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush |5.3.4 |a| |i|| | 10 |
| Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 10 |
| Nearside Front Suspension arm locating pin insecure |2.4.G.3a| | 10 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 10 |
| Front Passenger`s seat insecure |6.2.A.1| | 10 |
| Offside Front Radius arm has excessive play in a ball joint |2.4.G.2| | 10 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 10 |
| Offside Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 10 |
| Offside Rear Lower Shock absorber insecure |2.7.2b| | 10 |
| Front Position lamp not working |4.2.1 |a|| | 10 |
| Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 10 |
| Nearside Rear Lower Anti-roll bar locating pin insecure |2.4.G.3a| | 10 |
| Nearside Outer Body has a projection caused by corrosion |6.1.C.1| | 10 |
| Offside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 10 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 10 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 10 |
| Direction indicator not working |1.4.A.2c| | 10 |
| Nearside Rear Parking brake: efficiency below requirements |3.7.B.7| | 10 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 10 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 10 |
| Offside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 10 |
| Nearside Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 10 |
| Nearside Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 10 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Offside Rear Stop lamp insecure |1.2.1a| | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 10 |
| Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 10 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 10 |
| Dropside cannot be secured in the closed position |6.4.1| | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 10 |
| Offside Inner Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 10 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mount |2.4.A.3| | 10 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 10 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 10 |
| Nearside Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 10 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 10 |
| Centre Rear Seat belt insecurely fixed to the seat |5.2.1a| | 10 |
| Power steering pump leaking (2.1.5 (a)) | 10 |
| Offside Inner Front Ball joint has excessive play |2.2.B.1f| | 10 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 10 |
| Offside Front Headlamp incorrect colour |1.7.5b| | 10 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 10 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 10 |
| Nearside Front Upper Body has a sharp edge caused by damage |6.1.C.1| | 10 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 10 |
| Rear Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 10 |
| Offside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 10 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 10 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 10 |
| Offside Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 10 |
| Offside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 10 |
| Parking brake lever releases when knocked |3.1.6a| | 10 |
| Front Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 10 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 10 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 10 |
| Nearside Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 10 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i)) | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i)) | 10 |
| Centre Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 10 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 10 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 10 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x member |2.4.A.3| | 10 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 10 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 10 |
| Offside Front position lamp|s| obscured more than 50% |1.1.A.3c| | 10 |
| Front Direction indicators not working |1.4.A.2c| | 10 |
| Nearside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 10 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 10 |
| Front Headlamps matched pair are incorrectly positioned |1.7.3| | 10 |
| Offside Steering rack insecure |2.2.B.1a| | 10 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 10 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 10 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 10 |
| Rear Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 10 |
| Nearside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 10 |
| Fuel system component leaking fuel pump |7.2.3| | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount |2.4.A.3| | 10 |
| Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b)) | 10 |
| Offside Rear Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 10 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 10 |
| Rear Anti-roll bar severely distorted |2.4.G.1| | 10 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 10 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 10 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 10 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 10 |
| Front Access panel cannot be secured in the closed position |6.4.1| | 10 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 10 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 10 |
| Offside Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 10 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 10 |
| Offside Front Seat belt cut causing the fibres to separate |5.1.B.3a| | 10 |
| Nearside Rear Seat belt retracting mechanism defective |5.1.B.6b| | 10 |
| Headlamp adversely affected by the operation of another lamp |1.7.5c| | 10 |
| Centre engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 10 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 10 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 10 |
| Nearside Rear Service brake application uneven across the axle |3.7.D.2b| | 10 |
| Offside Front Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 10 |
| Rear Rear wheel bearing rough when rotated |2.6.1| | 10 |
| Headlamp aim not tested |4.1.2 |b|| | 10 |
| Rear rear brake juddering severely |3.7.A.5b| | 10 |
| Front Windscreen wiper blade missing |8.2.2| | 10 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 10 |
| Nearside rear brake recording little or no effort |3.8.A.4a| | 10 |
| Detachable tow ball quick release mechanism does not secure the tow ball arm as intended |6.6.4b| | 10 |
| Offside Front brake disc has restricted free movement |3.5.1j| | 10 |
| Nearside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 10 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 10 |
| Offside Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 10 |
| Nearside Front Brake pipe kinked |3.6.B.2b| | 10 |
| Offside Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 10 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 9 |
| Offside Direction indicator incomplete |1.5.A1b| | 9 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 9 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 9 |
| Offside Front position lamp|s| insecure |1.1.A.3a| | 9 |
| Offside Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 9 |
| Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 9 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 9 |
| Headlamp levelling device inoperative |1.7.2| | 9 |
| Rear Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 9 |
| Rear Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 9 |
| Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 9 |
| Side repeater incorrect colour |1.4.A.2f| | 9 |
| Nearside Rear Position lamp not working |4.2.1 |a| |ii|| | 9 |
| Offside Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 9 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor |2.4.A.3| | 9 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting |2.4.A.3| | 9 |
| Nearside Rear Electrical wiring damaged and bare wires exposed |1.9.2c| | 9 |
| Offside Rear Leaf spring to axle securing bolt missing |2.4.B.7b| | 9 |
| Nearside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
| Central Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 9 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 9 |
| Nearside Front Brake hose stretched |3.6.B.4c| | 9 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 9 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 9 |
| Nearside Rear Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 9 |
| Rear Brake linkage has restricted free movement |3.5.1k| | 9 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 9 |
| Lower Steering column universal joint has excessive play |2.1.5| | 9 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 9 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 9 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 9 |
| Front Front position lamp|s| not working both |1.1.A.3b| | 9 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 9 |
| Nearside Outer Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 9 |
| Nearside Rear Body has a sharp edge caused by corrosion arch |6.1.C.1| | 9 |
| Offside Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 9 |
| Offside Front Front suspension retaining device missing |2.5.A.4| | 9 |
| Brake pedal creeps down under servo assistance and touches the floor |3.3.C.3| | 9 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 9 |
| Offside Brake pedal anti-slip provision incomplete |3.3.A.1b| | 9 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 9 |
| Offside Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 9 |
| Offside Front Power steering pipe/hose leaking (2.1.5 (a)) | 9 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 9 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 9 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 9 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 9 |
| Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 9 |
| Offside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 9 |
| Offside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 9 |
| Nearside Outer Rear position lamp|s| not working |1.1.A.3b| | 9 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 9 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 9 |
| Offside Rear Towbar component insecure |6.6.1| | 9 |
| Nearside Rear Seat belt affected by an insecure seat fixing |5.1.B.2b| | 9 |
| Nearside Rear Stop lamp not working |1.3.2a| | 9 |
| Offside Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 9 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 9 |
| Front Headlamps matched pair are not the same colour |1.7.6| | 9 |
| Nearside Inner Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 9 |
| Nearside Front passenger seat insecure |6.2.3| | 9 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 9 |
| Offside Front Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 9 |
| Centre Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 9 |
| Rear Position lamp not working (4.2.1 (a) (ii)) | 9 |
| Nearside Fuel tank insecure |7.2.1| | 9 |
| Nearside Rear Leaf spring anchor bracket fractured |2.4.B.6b| | 9 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 9 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 9 |
| All position lamps not in good working order |function impaired| |1.1.A.2a| | 9 |
| Offside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 9 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 9 |
| Nearside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 9 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 9 |
| Centre passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 9 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 9 |
| Nearside Obligatory mirror insecure |3.3 |b| |ii|| | 9 |
| Central Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 9 |
| Front Bonnet retaining device excessively deteriorated |8.4.2| | 9 |
| Centre Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 9 |
| Rear Leaf spring longitudinally displaced |2.4.B.1d| | 9 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 9 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 9 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 9 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 9 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 9 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 9 |
| Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 9 |
| Offside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 9 |
| Nearside Direction indicators not in good working order |function impaired| |1.5.A1b| | 9 |
| Nearside Front Outer Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 9 |
| Offside Front Leaf spring eye defective |anchor| |2.4.B.1b| | 9 |
| Front Side repeater not working |1.4.A.2c| | 9 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 9 |
| Offside Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 9 |
| Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 9 |
| Offside Front drive shaft coupling is excessively worn |2.5.C.1c| | 9 |
| Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 9 |
| Offside Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 9 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 9 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 9 |
| Offside Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 9 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 9 |
| Nearside Front Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Nearside Rear Seat belt stitching badly frayed |5.2.2b| | 9 |
| Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 9 |
| Offside Front position lamp|s| missing |1.1.A.3a| | 9 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 9 |
| Offside Rear Leaf spring shackle bracket fractured |2.4.B.6b| | 9 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mounting |2.4.A.3| | 9 |
| Offside Outer Rear Road wheel bead rim badly distorted |4.2.A.1a| | 9 |
| Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Front Bootlid cannot be secured in the closed position |6.4.1| | 9 |
| Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 9 |
| Offside Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
| Offside Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 9 |
| Nearside Front brake disc locking device missing |3.5.1l| | 9 |
| Nearside Rear position lamp|s| not in good working order |not working| |1.1.4a| | 9 |
| Offside Rear reflector not red in colour |1.5.1d| | 9 |
| Nearside Front Suspension arm worn and seriously weakened |2.4.G.1| | 9 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i)) | 9 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 9 |
| Nearside Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 9 |
| Indicator switch missing |1.4.A.1| | 9 |
| Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 9 |
| Offside Front Body has a sharp edge caused by corrosion Wing |6.1.C.1| | 9 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wing |2.4.A.3| | 9 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 9 |
| Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 9 |
| Nearside Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 9 |
| Nearside Front Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 9 |
| Offside Inner Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 9 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 9 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 9 |
| Front Steering rack insecure |2.2.B.1a| | 9 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 9 |
| Bonnet primary retaining device ineffective |3.1 |c|| | 9 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 9 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 9 |
| Nearside Rear Lower Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 9 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step |5.2.6| | 9 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 9 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 9 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 9 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 9 |
| Offside Rear Lower Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 9 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 9 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 9 |
| Nearside Rear Brake load sensing valve inoperative |3.6.E.3| | 9 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 9 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 9 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 9 |
| Offside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 9 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 9 |
| Nearside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 9 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 9 |
| Offside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 9 |
| Front Seat belt locking mechanism does not secure or release |5.2.5a| | 9 |
| Nearside Rear Service brake grabbing severely |1.2.1 |c|| | 9 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 9 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 9 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 9 |
| Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 9 |
| Fuel tank insecure tank strap broken |7.2.1| | 9 |
| Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 9 |
| Headlamp not working on main beam both |1.7.5a| | 9 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 9 |
| Centre Seat belt stitching badly frayed |5.2.2b| | 9 |
| Front Seat belt retracting mechanism defective |5.2.5b| | 9 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 9 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 9 |
| Front Stop lamp not working |1.2.1b| | 9 |
| Rear Brake pipe kinked |3.6.B.2b| | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 9 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 9 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 9 |
| Nearside Front Upper coil spring fractured |2.4.C.1a| | 9 |
| Nearside Stop lamp obscured more than 50% |1.2.1c| | 9 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 9 |
| Nearside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 9 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 9 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 9 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3| | 9 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 9 |
| Steering wheel in a condition that hampers proper control |2.1.1| | 9 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 9 |
| Fuel cap/sealing device does not fasten securely by a positive means |6.7.2a| | 9 |
| Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 9 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 9 |
| Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 9 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 9 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis shock mount |2.4.A.3| | 9 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 9 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger |2.4.A.3| | 9 |
| Centre Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 9 |
| Offside Rear Lower Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 9 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 9 |
| Rear Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i)) | 9 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 9 |
| Nearside Rear Leaf spring shackle bracket fractured |2.4.B.6b| | 9 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 9 |
| Driver`s view restricted by object |6.9.1a| | 9 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 9 |
| Nearside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 9 |
| Offside Front Brake hose inappropriately repaired |3.6.A.3| | 9 |
| Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 9 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 9 |
| Brake linkage has restricted free movement |3.5.1k| | 9 |
| Offside Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 9 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 9 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Nearside Front Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 9 |
| Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 9 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 9 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 9 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 9 |
| Offside Windscreen wiper blade deteriorated |6.1.2| | 9 |
| Offside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
| Nearside Lower Front position lamp|s| not working |1.1.A.3b| | 9 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger |2.4.A.3| | 9 |
| Nearside Front Anti-roll bar severely distorted |2.4.G.1| | 9 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 9 |
| Nearside Front Lower Suspension arm locating pin insecure |2.4.G.3a| | 9 |
| Swivelling towbar swivel pin missing |6.6.5a| | 9 |
| Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 9 |
| Offside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 9 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 9 |
| Offside Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 9 |
| Offside Rear Lower Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 9 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 9 |
| Nearside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 9 |
| Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 9 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 9 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 9 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 9 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 9 |
| Offside Front Rear wheel bearing has excessive play |2.6.2| | 9 |
| Offside Front Rear wheel bearing rough when rotated |2.6.1| | 9 |
| Offside Brake pipe inadequately supported |3.6.B.1| | 9 |
| Front Headlamp incorrect colour |1.7.5b| | 9 |
| Offside Battery insecure |1.9.1| | 8 |
| Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 8 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 8 |
| Nearside Front Lower Horn not working |1.6.2a| | 8 |
| Nearside Inner Front Statutory seat belt missing |5.1.1| | 8 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 8 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Windscreen wiper not working (3.4 (a)) | 8 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 8 |
| Nearside Front Brake pipe excessively chafed |3.6.B.2c| | 8 |
| Speedometer clearly inoperative |7.8 |b| |ii|| | 8 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 8 |
| Nearside Outer Front Seat belt locking mechanism does not secure or release |5.2.5a| | 8 |
| Nearside Rear Position lamp lens seriously defective |4.2.1 |b|| | 8 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 8 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 8 |
| Nearside Rear Brake pipe fouled by moving parts |3.6.B.2a| | 8 |
| Centre Rear Stop lamp not working |1.2.1b| | 8 |
| Offside Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 8 |
| Headlamp insecure |1.7.3| | 8 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 8 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 8 |
| Offside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 8 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 8 |
| Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 8 |
| Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 8 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 8 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 8 |
| Front Headlamp aim not tested |1.8.A.1c| | 8 |
| Front position lamp|s| not working both sides |1.1.A.3b| | 8 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 8 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 8 |
| Offside Rear Exhaust mounting missing |7.1.1b| | 8 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 8 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 8 |
| Nearside Front Body has a sharp edge caused by corrosion WING |6.1.C.1| | 8 |
| Offside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mount |2.4.A.3| | 8 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 8 |
| Nearside Front Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 8 |
| Offside Front Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 8 |
| Rear Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 8 |
| Offside Inner Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
| Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 8 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 8 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 8 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 8 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 8 |
| Nearside Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 8 |
| Nearside Rear Leaf spring anchor bracket damaged and seriously weakened |2.4.B.6d| | 8 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 8 |
| Nearside Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear |8.1.2b| | 8 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 8 |
| Steering pivot point has excessive play |2.2.B.1g| | 8 |
| Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 8 |
| Nearside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 8 |
| Nearside Rear Towbar retaining device missing |6.6.3a| | 8 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount |2.4.A.3| | 8 |
| Centre Front Brake pedal anti-slip provision missing |3.3.A.1b| | 8 |
| Rear Brake hose leaking |3.6.A.1| | 8 |
| Nearside Front Leaf spring fractured |2.4.B.1a| | 8 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 8 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 8 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 8 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 8 |
| Nearside Outer Body has a sharp edge caused by corrosion sill |6.1.C.1| | 8 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.3| | 8 |
| Front Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 8 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 8 |
| Offside Front Brake pipe excessively chafed |3.6.B.2c| | 8 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 8 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 8 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 8 |
| Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 8 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 8 |
| Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 8 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 8 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 8 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 8 |
| Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 8 |
| Centre Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 8 |
| Nearside Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 8 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 8 |
| Exhaust has a major leak of exhaust gases rear silencer |7.1.2| | 8 |
| Rear Prop shaft bearing housing likely to fail |6.1.7 |f| |ii|| | 8 |
| Nearside Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 8 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 8 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 8 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 8 |
| Rear Direction indicator incorrect colour |1.4.A.2f| | 8 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 8 |
| Nearside Rear Position lamp lens seriously defective (4.2.1 (b)) | 8 |
| Offside Rear Position lamp lens seriously defective (4.2.1 (b)) | 8 |
| Offside Rear Torsion bar insecure at an end fixing |2.4.E.2| | 8 |
| Offside Front Valve stem seriously damaged (5.2.3 (j)) | 8 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 8 |
| Front Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 8 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 8 |
| Front Power steering ram|s| leaking from a failed component |2.3.3b| | 8 |
| Rear Tailgate cannot be secured in the closed position |6.4.1| | 8 |
| Nearside Outer Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 8 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 8 |
| Offside Suspension component mounting prescribed area is fractured |2.4.A.3| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x member |2.4.A.3| | 8 |
| Nearside Front Brake pipe excessively damaged |3.6.B.2c| | 8 |
| Nearside Front Seat belt damaged (7.1.2 (b) (i)) | 8 |
| Offside Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 8 |
| Nearside Inner Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Offside Inner Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 8 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 8 |
| Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Front engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 8 |
| Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 8 |
| Front Power steering fluid level below minimum |2.3.1| | 8 |
| Offside Parking brake: efficiency below requirements |3.7.B.7| | 8 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Offside brake drum contaminated by oil |3.5.1h| | 8 |
| Rear Emergency exit sign missing |6.2.D.3| | 8 |
| Nearside Outer Rear Road wheel bead rim badly distorted |4.2.A.1a| | 8 |
| Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.3 |a|| | 8 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 8 |
| Nearside Rear Lower Body has a sharp edge caused by damage |6.1.C.1| | 8 |
| Nearside Outer Seat belt stitching badly frayed |5.2.2b| | 8 |
| Nearside Body has a sharp edge caused by corrosion sill |6.1.C.1| | 8 |
| Rear Brake valve damaged |3.6.A.2c| | 8 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 8 |
| Parking brake lever ratchet mechanism is broken |3.1.5| | 8 |
| Offside Front Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 8 |
| Nearside Front passenger door does not latch securely closed |6.2.B.1a| | 8 |
| Leaf spring to axle securing nut insecure |2.4.B.7b| | 8 |
| Nearside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Front Anti-roll bar insecure |2.4.G.1| | 8 |
| Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 8 |
| Offside Rear Position lamp not working |4.2.1 |a| |ii|| | 8 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 8 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.4d| | 8 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor |2.4.A.3| | 8 |
| Steering column universal joint has excessive play |2.1.5| | 8 |
| Offside Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 8 |
| Nearside Passenger door cannot be opened from outside the vehicle |6.5.11a| | 8 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 8 |
| Offside Front Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 8 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 8 |
| Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 8 |
| Front brake disc excessively pitted |3.5.1g| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 8 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 8 |
| Offside Rear Service brake: efficiency below requirements |3.7.B.7| | 8 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 8 |
| Offside Front Obligatory mirror missing |3.3 |a|| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 8 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 8 |
| Body insecure and dangerous to other road users front bumper |6.1.B.1b| | 8 |
| Nearside Front position lamp|s| obscured more than 50% |1.1.A.3c| | 8 |
| Nearside Rear Upper Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 8 |
| Offside Front Braking system leaking brake pipe |3.6.A.1| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 8 |
| Nearside Upper All position lamps not working |1.1.A.3b| | 8 |
| Nearside Front brake disc locking device insecure |3.5.1l| | 8 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 8 |
| Offside Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 8 |
| Nearside Rear Lower Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 8 |
| Brake pipe inadequately supported front to rear |3.6.B.1| | 8 |
| Offside Towbar component insecure |6.6.1| | 8 |
| Offside Rear Floor excessively deteriorated |6.2.4 |a| |i|| | 8 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 8 |
| Offside Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 8 |
| Offside Front Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 8 |
| Centre Front Seat belt insecurely fixed to the seat |5.2.1a| | 8 |
| Nearside passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 8 |
| Nearside Front Steering rack insecure |2.2.B.1a| | 8 |
| Offside Front Bonded suspension unit attachment loose |2.4.F.1a| | 8 |
| Offside Rear position lamp|s| does not face the rear |1.1.A.3a| | 8 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 8 |
| Offside Hazard warning lamps inoperative (4.4.1 (e)) | 8 |
| Centre Front position lamp|s| not working |1.1.A.3b| | 8 |
| Rear Leaf spring fractured |2.4.B.1a| | 8 |
| Nearside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 8 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 8 |
| Offside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 8 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 8 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Nearside Front Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 8 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i)) | 8 |
| Centre Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 8 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 8 |
| Offside Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 8 |
| Nearside Upper Rear position lamp|s| incorrect colour |1.1.A.3e| | 8 |
| Offside Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 8 |
| Offside Upper Stop lamp not working |1.2.1b| | 8 |
| Rear fog lamp missing |1.3.2a| | 8 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Rear Fuel system component insecure |7.2.1| | 8 |
| Inner Stop lamp not working |1.2.1b| | 8 |
| Centre Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 8 |
| Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
| Offside Front Shock absorber has an excessively worn bush |2.7.4| | 8 |
| Rear Brake hose excessively damaged |3.6.B.4d| | 8 |
| Offside Rear Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 8 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 8 |
| Offside Rear Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 8 |
| Centre Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 8 |
| Offside Rear Leaf spring to axle securing nut missing |2.4.B.7b| | 8 |
| Centre Front drive shaft support bearing excessively worn |2.5.C.2c| | 8 |
| Offside Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 8 |
| Offside Headlamp aim beam image too far to the left |1.6.B4| | 8 |
| Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g)) | 8 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 8 |
| Horn is a siren |1.6.2c| | 8 |
| Nearside Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 8 |
| Offside Rear Outer Body has a sharp edge caused by corrosion sill |6.1.C.1| | 8 |
| Offside Rear Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 8 |
| Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 8 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area |7.1.1 |a| |i|| | 8 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 8 |
| Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 8 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 8 |
| Offside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 8 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 8 |
| Nearside Rear Suspension has inadequate clearance with the chassis |2.4.A.1a| | 8 |
| Centre Rear Brake load sensing valve linkage seized |3.6.E.3| | 8 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 8 |
| Offside Rear Upper Rear position lamp|s| incorrect colour |1.1.A.3e| | 8 |
| Offside Front Suspension arm locating pin insecure |2.4.G.3a| | 8 |
| Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under arch |2.4.A.3| | 8 |
| Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 8 |
| Offside Upper All position lamps not working |1.1.A.3b| | 8 |
| Offside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Offside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 8 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 8 |
| Nearside Body has a sharp edge caused by damage door mirror |6.1.C.1| | 8 |
| Prop shaft bearing excessively worn both (6.1.7 (b) (i)) | 8 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 8 |
| Rear Prop shaft bearing housing insecure |6.1.7 |f| |i|| | 8 |
| Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 8 |
| Offside Rear Lower Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 8 |
| Nearside Hazard warning lamps inoperative |1.4.B.1b| | 8 |
| Nearside Rear Leaf spring linkage pin excessively loose in its bracket |2.4.B.3a| | 8 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 8 |
| Offside Rear Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 8 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 8 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 8 |
| Offside Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 8 |
| All direction indicators not working |4.4.1 |a| |ii|| | 8 |
| Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 8 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 8 |
| Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Central Prop shaft securing bolt loose (6.1.7 (a) (i)) | 8 |
| Offside Front Track rod end ball joint has excessive play (2.2.B.1f) | 8 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 8 |
| Nearside Rear Brake performance not tested |3.7.A.1| | 8 |
| Offside Front drive shaft coupling bearing fastener insecure |2.5.C.2b| | 8 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 8 |
| Front Obligatory mirror missing |8.1.1| | 8 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 8 |
| Front Horn not working |7.7 |a| |ii|| | 8 |
| Nearside Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 8 |
| Nearside Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 8 |
| Nearside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 8 |
| Centre Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 8 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 8 |
| Centre Rear Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 8 |
| Nearside Rear Lower Anti-roll bar insecure |2.4.G.1| | 8 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 8 |
| Offside Rear Leaf spring fractured front eye (5.3.1 (b) (i)) | 8 |
| Driver`s door catch insecure |6.2.B.2| | 8 |
| Offside Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 8 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 8 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 8 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 8 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 8 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 8 |
| Offside Front Side repeater insecure |1.4.A.2b| | 8 |
| Offside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 8 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 8 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 8 |
| Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 8 |
| Nearside Rear Stop lamp insecure |1.2.1a| | 8 |
| Offside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 8 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sill |2.4.A.3| | 8 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 8 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 8 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 8 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 8 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i)) | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 8 |
| Headlamp levelling device inoperative |4.1.5 |a|| | 8 |
| Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Electronic stability system warning lamp indicates a fault |3.4.1c| | 8 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 8 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 8 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 8 |
| Nearside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 8 |
| Offside Front Steering column shaft has excessive end float |2.1.3| | 8 |
| Offside Side repeater flashing more than 120 times a minute |1.4.A.2g| | 8 |
| Centre Seat belt insecurely fixed to the seat |5.2.1a| | 8 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner door step |5.2.6| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 8 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 8 |
| Nearside Front Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 8 |
| Power steering fluid reservoir empty (2.1.5 (b) (ii)) | 7 |
| Nearside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 7 |
| Offside Rear Brake cable knotted |3.5.1b| | 7 |
| Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 7 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 7 |
| Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 7 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 7 |
| Nearside Rear Brake drum contaminated |1.1.14 |b|| | 7 |
| brake disc in such a condition that it is seriously weakened both front |3.5.1i| | 7 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 7 |
| Offside Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 7 |
| Offside Rear Upper Anti-roll bar linkage insecure |2.4.G.1| | 7 |
| Centre Front An item not tested |Manual| | 7 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 7 |
| Offside Front Road wheel fixing missing |5.2.1 |a| |i|| | 7 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 7 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 7 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 7 |
| Position lamp not working all (4.2.1 (a) (ii)) | 7 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 7 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 7 |
| Nearside Front Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 7 |
| Nearside Front Lower Front position lamp|s| not working |1.1.A.3b| | 7 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 7 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 7 |
| Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 7 |
| Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 7 |
| Offside Front Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 7 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn (5.3.4 (a) (i)) | 7 |
| Nearside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 7 |
| Central Front Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 7 |
| Nearside Rear Brake lining(s) contaminated (1.1.13 (b)) | 7 |
| Offside Front Body has a sharp edge caused by damage wing |6.1.C.1| | 7 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 7 |
| Nearside Rear Brake lining|s| contaminated |1.1.13 |b|| | 7 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Nearside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 7 |
| Nearside Rear Lower Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 7 |
| Nearside Rear Brake cable damaged |1.1.15 |a|| | 7 |
| Offside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 7 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 7 |
| Nearside Obligatory mirror does not provide a view to the rear (3.3 (c)) | 7 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 7 |
| Nearside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 7 |
| Front coil spring incomplete |2.4.C.1a| | 7 |
| Fuel system component leaking under bonnet |7.2.3| | 7 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 7 |
| Nearside Rear Suspension arm has excessive play in a ball joint |2.4.G.2| | 7 |
| Centre Body insecure and dangerous to other road users |6.1.B.1b| | 7 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 7 |
| Nearside Obligatory mirror insecure (3.3 (b) (ii)) | 7 |
| Offside Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 7 |
| Nearside Stop lamp not working (1.2.1b) | 7 |
| Offside Stop lamp not working (1.2.1b) | 7 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 7 |
| Nearside Towbar retaining device insecure |6.6.3a| | 7 |
| Offside Towbar retaining device insecure |6.6.3a| | 7 |
| Nearside Upper Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 7 |
| Nearside Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 7 |
| Rear position lamp|s| adversely affected by the operation of another lamp both |1.1.A.3f| | 7 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Nearside Front Steering column shaft has excessive end float |2.1.3| | 7 |
| Front Horn not working (7.7 (a) (ii)) | 7 |
| Offside Rear Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 7 |
| Offside Outer Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 7 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 7 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 7 |
| Offside Rear Hydraulic brake cylinder leaking and braking performance affected |1.1.16 |b| |ii|| | 7 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 7 |
| Nearside Rear Brake valve corroded and excessively weakened |3.6.A.2b| | 7 |
| Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 7 |
| Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 7 |
| Nearside Rear Road wheel distorted |4.2.A.1a| | 7 |
| Nearside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 7 |
| Nearside Emergency exit sign missing |6.2.D.3| | 7 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 7 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 7 |
| Front Body has a projection caused by corrosion |6.1.C.1| | 7 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 7 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 7 |
| Nearside Brake load sensing valve linkage seized |3.6.E.3| | 7 |
| Nearside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 7 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 7 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 7 |
| Nearside Rear Brake hose leaking |3.6.A.1| | 7 |
| Nearside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 7 |
| Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 7 |
| Nearside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 7 |
| Offside Rear Upper Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 7 |
| Nearside Rear Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 7 |
| Offside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 7 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 7 |
| Offside Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 7 |
| Nearside Rear Braking system leaking wheel cylinder |3.6.A.1| | 7 |
| Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 7 |
| Nearside Front Headlamp incorrect colour |1.7.5b| | 7 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 7 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 7 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 7 |
| Centre Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Nearside Rear Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 7 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 7 |
| Offside Front Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 7 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 7 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 7 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 7 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 7 |
| Nearside Front Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 7 |
| Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 7 |
| Nearside Front Lower Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 7 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 7 |
| Nearside Rear Tailgate cannot be secured in the closed position |6.4.1| | 7 |
| Towbar component fractured |6.6.1| | 7 |
| Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 7 |
| Offside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Track rod end ball joint has excessive play both |2.2.B.1f| | 7 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 7 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 7 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 7 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 7 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 7 |
| Nearside Rear Statutory seat belt missing |5.1.A.1| | 7 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 7 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 7 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 7 |
| Nearside Front Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 7 |
| Centre Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Central Exhaust system not adequately supported |7.1.1| | 7 |
| Nearside Inner Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Offside Front Headlamp flickers when tapped lightly by hand |1.2.4c| | 7 |
| Nearside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 7 |
| Drivers airbag obviously inoperative (7.1.5 (c)) | 7 |
| Headlamp aim beam image kick up to the offside |1.8| | 7 |
| Offside Rear Lower Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b) | 7 |
| Offside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 7 |
| Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 7 |
| Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 7 |
| Nearside Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 7 |
| Offside Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 7 |
| Nearside Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 7 |
| Inner Track rod end ball joint has excessive play |2.2.B.1f| | 7 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 7 |
| Nearside Front Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 7 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 7 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 7 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 7 |
| Brake pipe excessively chafed |3.6.B.2c| | 7 |
| Offside Rear Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 7 |
| Rear Brake performance not tested |3.7.A.1| | 7 |
| Offside Rear Towbar retaining device missing |6.6.3a| | 7 |
| Offside Rear Direction indicator incorrect colour lens damaged |1.4.A.2f| | 7 |
| Offside Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 7 |
| Headlamps matched pair are not the same colour |1.7.6| | 7 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 7 |
| Offside Front Body component corroded and likely to cause injury wing |6.2.1 |a| |i|| | 7 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 7 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 7 |
| Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 7 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 7 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 7 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 7 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i)) | 7 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section |2.4.A.3| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 7 |
| Nearside Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 7 |
| Nearside Front Body has a sharp edge caused by damage mirror |6.1.C.1| | 7 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 7 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 7 |
| Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 7 |
| Nearside Front Headlamp aim not tested |4.1.2 |b|| | 7 |
| Nearside Outer Front Seat belt retracting mechanism defective |5.2.5b| | 7 |
| Offside Front Brake pedal anti-slip provision missing |3.3.A.1b| | 7 |
| Offside Rear Brake load sensing valve seized |3.6.E.3| | 7 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened |5.3.1 |b| |i|| | 7 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 7 |
| Nearside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 7 |
| Centre An item not tested |Manual| | 7 |
| Offside Direction indicators not in good working order |function impaired| |1.5.A1b| | 7 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 7 |
| Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 7 |
| Nearside Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 7 |
| Offside Rear Body has a sharp edge caused by corrosion arch |6.1.C.1| | 7 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load valve |3.3.A.2| | 7 |
| Nearside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 7 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step area |5.2.6| | 7 |
| Offside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Nearside Rear Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 7 |
| Nearside Rear passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 7 |
| Nearside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 7 |
| Nearside Inner Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Offside Rear Service brake grabbing severely |1.2.1 |c|| | 7 |
| Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Offside Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Steering locking device insecure |2.2.C.1g| | 7 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 7 |
| Offside Rear Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 7 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 7 |
| Nearside Front Hazard warning lamps inoperative |1.4.B.1b| | 7 |
| Nearside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 7 |
| Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 7 |
| Rear Brake lever has restricted free movement |3.5.1k| | 7 |
| Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 7 |
| Nearside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 7 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 7 |
| Nearside Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 7 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 7 |
| Nearside Side repeater not in good working order |not working| |1.5.1b| | 7 |
| Offside Rear Brake drum contaminated (1.1.14 (b)) | 7 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount |2.4.A.3| | 7 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 7 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3| | 7 |
| Nearside Rear Direction indicator obscured more than 50% |1.4.A.2d| | 7 |
| Nearside Front Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 7 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 7 |
| Nearside Outer Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 7 |
| Brake load sensing valve inoperative but ABS functioning |1.1.17 |c| |i|| | 7 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 7 |
| Offside Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 7 |
| Nearside Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Nearside Front Front passenger door does not latch securely closed |6.2.B.1a| | 7 |
| Nearside Front Service brake application uneven across the axle |3.7.D.2b| | 7 |
| Offside Rear fog lamp not working (1.3.2b) | 7 |
| Rear Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 7 |
| Offside Front Sub-frame insecure |2.4.G.1| | 7 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 7 |
| Nearside Front Anti-roll bar fractured |2.4.G.1| | 7 |
| Offside Loading door cannot be secured in the closed position |6.4.1| | 7 |
| Nearside Inner Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 7 |
| Nearside Rear Obligatory mirror missing |8.1.1| | 7 |
| Front Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 7 |
| Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Nearside Rear Wheel insecure |4.2.A.1c| | 7 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 7 |
| Nearside Front Steering rack damaged and unserviceable |2.2.C.1d| | 7 |
| Offside Rear Lower Anti-roll bar insecure |2.4.G.1| | 7 |
| Stop lamp not working both sides |1.2.1b| | 7 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 7 |
| Nearside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 7 |
| Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 7 |
| Headlamp incorrect colour |1.7.5b| | 7 |
| Offside Front Brake pipe excessively damaged |3.6.B.2c| | 7 |
| Nearside Outer Rear Statutory seat belt missing |5.1.1| | 7 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 7 |
| Offside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 7 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 7 |
| Nearside Rear Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 7 |
| Nearside Rear Upper Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 7 |
| Rear Towbar retaining device missing |6.6.3a| | 7 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 7 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 7 |
| Offside Outer Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 7 |
| Offside Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 7 |
| Nearside Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 7 |
| Offside Front Front position lamp|s| not working side light |1.1.A.3b| | 7 |
| Nearside Inner Statutory seat belt missing |5.1.1| | 7 |
| Nearside Rear Lower Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 7 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Offside Outer Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 7 |
| Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Nearside Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 7 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |6.4.B.2| | 7 |
| Nearside Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 7 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 7 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 7 |
| Offside Rear Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 7 |
| Offside Rear reflector insecure |1.5.1a| | 7 |
| Nearside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 7 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting |2.4.A.3| | 7 |
| Nearside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 7 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 7 |
| Rear fog lamp switch insecure |1.3.1a| | 7 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 7 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 7 |
| Offside Front Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 7 |
| Nearside Front Wheel insecure |4.2.A.1c| | 7 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 7 |
| Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Obligatory mirror insecure (3.3 (b) (ii)) | 7 |
| Offside Stop lamp missing |1.2.1a| | 7 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 7 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 7 |
| Offside Front Sub-frame rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 7 |
| Offside Upper Rear position lamp|s| incorrect colour |1.1.A.3e| | 7 |
| Bonnet seriously at risk of opening inadvertently (3.1 (b) (ii)) | 7 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 7 |
| Rear position lamp|s| incomplete |1.1.4a| | 7 |
| Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 7 |
| Rear Dropside cannot be secured in the closed position |6.4.1| | 7 |
| Offside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Front Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 7 |
| Offside Outer Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Nearside Seat belt damaged |7.1.2 |b| |i|| | 7 |
| Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 7 |
| Offside Rear Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 7 |
| Offside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 7 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 7 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 7 |
| Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 7 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 7 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 7 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step |5.2.6| | 7 |
| Nearside Hinged tailboard cannot be secured in the closed position |6.4.1| | 7 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 7 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 7 |
| Nearside Front Outline marker lamp missing |4.2.1 |a|| | 7 |
| Offside Front Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 7 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 7 |
| Offside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Horn not loud enough to be heard by another road user |6.2.1c| | 7 |
| Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 7 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 7 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 7 |
| Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Front Shock absorber has negligible damping effect |2.7.5| | 7 |
| Nearside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 7 |
| Offside Rear Shock absorber has an excessively worn linkage |2.7.4| | 7 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 7 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear |2.4.A.3| | 7 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 7 |
| Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 7 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 7 |
| Offside Front Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 7 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.A.1| | 7 |
| Offside Front Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 7 |
| Nearside Rear Headlamp not working on dipped beam |1.7.5a| | 7 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 7 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 7 |
| Nearside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 7 |
| Stop lamp not working Both |1.2.1b| | 7 |
| Centre Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 7 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 7 |
| front brake recording little or no effort |3.7.B.5a| | 7 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 7 |
| Nearside Front Service brake indicates brake bind |3.7.D.2a| | 7 |
| Nearside Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 7 |
| Obligatory mirror insecure |8.1.1| | 7 |
| Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of leaf spring |2.4.A.3| | 7 |
| Front Direction indicator not working |1.4.A.2c| | 7 |
| Nearside Rear Rear reflector more than 50% obscured |1.5.1b| | 7 |
| Front position lamp|s| not working Both |1.1.A.3b| | 7 |
| Brake relay lever has restricted free movement |3.5.1k| | 7 |
| Offside Front Body panel corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 7 |
| Nearside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 7 |
| Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 7 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 7 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 7 |
| Driving control|s| clutch pedal anti-slip provision worn smooth. |6.8.3| | 7 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 7 |
| Offside Front Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 7 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 7 |
| Front Driver`s view to front impaired by crack |6.9.1b| | 7 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 7 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 7 |
| Front brake disc excessively worn |3.5.1g| | 7 |
| Rear Brake pipe fouled by moving parts |3.6.B.2a| | 7 |
| Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 7 |
| Central Stop lamp not working |1.2.1b| | 7 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 7 |
| Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 7 |
| Centre Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 7 |
| Offside Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 7 |
| Offside Rear Brake load sensing valve linkage seized |3.6.E.3| | 7 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 7 |
| Stop lamp emits other than a steady red light |1.2.1e| | 7 |
| Fuel system component leaking injectors |7.2.3| | 7 |
| Centre Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear outrigger |2.4.A.3| | 7 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 7 |
| Nearside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 7 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 7 |
| Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 7 |
| Nearside Brake load sensing valve seized |3.6.E.3| | 7 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 7 |
| Nearside Front Suspension arm ball joint dust cover missing |2.4.G.2| | 7 |
| Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x3 |2.4.A.3| | 7 |
| Speed limiter plate missing |6.9.1a| | 7 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 7 |
| Centre Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Front Windscreen wiper not working |3.4 |a|| | 6 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 6 |
| Offside Front Seat belt buckle not functioning as intended |7.1.2 |d|| | 6 |
| Nearside Front Horn not loud enough to be heard by another road user |1.6.2b| | 6 |
| Nearside Rear Anti-roll bar locating pin retaining device not properly locked |2.4.G.3b| | 6 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 6 |
| Central Seat belt buckle missing (7.1.2 (d)) | 6 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of another road user |6.4.B.3| | 6 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 6 |
| Nearside Front Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 6 |
| Nearside Rear Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 6 |
| Centre Body has a sharp edge caused by damage |6.1.C.1| | 6 |
| Rear Brake valve corroded and excessively weakened |3.6.A.2b| | 6 |
| Front brake disc cracked |3.5.1h| | 6 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 6 |
| Centre Front Exhaust system not adequately supported |7.1.1| | 6 |
| Offside Front Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 6 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 6 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 6 |
| Offside Front rear brakes release unevenly |3.7.B.4| | 6 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 6 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 6 |
| Nearside Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 6 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 6 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 6 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under arch |2.4.A.3| | 6 |
| Rear Direction indicators incorrect colour |1.4.A.2f| | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/outrigger |2.4.A.3| | 6 |
| Offside Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 6 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 6 |
| Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 6 |
| Rear Brake valve leaking |1.1.7 |d| |i|| | 6 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 6 |
| Nearside Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 6 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 6 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 6 |
| Nearside Outer Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 6 |
| Nearside Rear Brake lining|s| insecure |3.5.1g| | 6 |
| Nearside Front Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 6 |
| Nearside Rear Brake actuating linkage mounting prescribed area is inadequately repaired |3.3.A.2| | 6 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 6 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount |5.3.6 |a| |i|| | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle |2.4.A.3| | 6 |
| Offside Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 6 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 6 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 6 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 6 |
| Offside Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 6 |
| Centre Electrical wiring inadequately supported |1.9.2a| | 6 |
| Offside Rear Leaf spring linkage pin excessively loose in its bracket |2.4.B.3a| | 6 |
| Offside Front Bumper likely to become detached (6.1.4 (a) (ii)) | 6 |
| Offside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 6 |
| Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Offside Front Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 6 |
| Nearside Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 6 |
| Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 6 |
| Offside Rear Electrical wiring damaged and bare wires exposed |1.9.2c| | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner corner |2.4.A.3| | 6 |
| Bonnet seriously at risk of opening inadvertently |3.1 |b| |ii|| | 6 |
| Bonnet primary retaining device excessively deteriorated |3.1 |c|| | 6 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 6 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded arch |2.4.A.3| | 6 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i)) | 6 |
| Nearside Rear Seat belt buckle missing (7.1.2 (d)) | 6 |
| Nearside Rear All position lamps not working |4.2.1 |a|| | 6 |
| Nearside Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 6 |
| Front Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 6 |
| Nearside Front Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 6 |
| Offside Rear Shock absorbers insecurely attached (5.3.2 (a) (i)) | 6 |
| Nearside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 6 |
| Offside Rear Towbar component excessively corroded |6.6.1| | 6 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 6 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 6 |
| Inner Rear fog lamp not working |1.3.2b| | 6 |
| Centre Front Seat belt stitching badly frayed |5.2.2b| | 6 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 6 |
| Nearside Front Front wheel bearing feels rough when rotated |2.5.A.2| | 6 |
| Nearside Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 6 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 6 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 6 |
| Offside Side repeater not in good working order |not working| |1.5.1b| | 6 |
| Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 6 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 6 |
| Nearside Front Tie bar/rod severely distorted |2.4.G.1| | 6 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 6 |
| Nearside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 6 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded innersill |5.2.6| | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 6 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 6 |
| Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 6 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 6 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 6 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 6 |
| Offside Front Windscreen wiper blade deteriorated |6.1.2| | 6 |
| Nearside Rear Passenger`s seat security significantly reduced |6.5.14| | 6 |
| Nearside Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 6 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 6 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet |6.1.B.2| | 6 |
| Nearside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 6 |
| Nearside Leaf spring to axle securing bolt insecure |2.4.B.7b| | 6 |
| Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2| | 6 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Front Seat belt not functioning as intended (7.1.2 (c)) | 6 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 6 |
| Front Bumper likely to become detached |6.1.4 |a| |ii|| | 6 |
| Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 6 |
| Offside Outer All position lamps not working |1.1.A.3b| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 6 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 6 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 6 |
| Nearside brake drum contaminated by oil |3.5.1h| | 6 |
| Nearside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 6 |
| Offside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 6 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 6 |
| Offside Side repeater flashing less than 60 times a minute |1.4.A.2g| | 6 |
| Nearside Front Fuel system component insecure |7.2.1| | 6 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 6 |
| Offside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a| | 6 |
| Nearside Rear All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 6 |
| Nearside Outer All position lamps not working |1.1.A.3b| | 6 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 6 |
| Offside Front Obligatory mirror does not provide a view to the rear (3.3 (c)) | 6 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 6 |
| Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 6 |
| Position lamp not working (4.2.1 (a) (ii)) | 6 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger (6.2.2 (d) (i)) | 6 |
| Nearside Front Outer Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 6 |
| Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor |2.4.A.3| | 6 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 6 |
| Rear Stop lamp emits other than a steady red light |1.2.1e| | 6 |
| Offside Rear Suspension has inadequate clearance with the chassis |2.4.A.1a| | 6 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 6 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 6 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 6 |
| Offside Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 6 |
| Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Emissions not tested (8.2.1.2 (d)) | 6 |
| Nearside Front Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 6 |
| Prop shaft bearing excessively worn centre (6.1.7 (b) (i)) | 6 |
| Nearside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 6 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Central Rear Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 6 |
| Offside Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 6 |
| Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 6 |
| Offside Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 6 |
| Prop shaft securing bolt missing (6.1.7 (a) (i)) | 6 |
| Nearside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 6 |
| Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 6 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 6 |
| Nearside Outer Rear Anti-roll bar linkage insecure |2.4.G.1| | 6 |
| Rear Anti-roll bar has excessive play in a pin/bush both |2.4.G.2| | 6 |
| Offside Rear Position lamp lens seriously defective |4.2.1 |b|| | 6 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 6 |
| Nearside Rear Direction indicator incorrect colour lens broken |1.4.A.2f| | 6 |
| Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 6 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step |7.1.1 |a| |i|| | 6 |
| Nearside Front Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 6 |
| Offside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 6 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member |6.1.A.1| | 6 |
| Offside Front Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 6 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 6 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 6 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 6 |
| Offside Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 6 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 6 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 6 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 6 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 6 |
| Nearside Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 6 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 6 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 6 |
| Nearside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 6 |
| Passenger`s airbag obviously defective |5.4.1| | 6 |
| Nearside Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 6 |
| Prop shaft bearing housing insecure |6.1.7 |f| |i|| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear |2.4.A.3| | 6 |
| Front front brake recording little or no effort |3.7.B.5a| | 6 |
| Front Power steering pump leaking from a failed component |2.3.3b| | 6 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Nearside Front Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 6 |
| Offside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 6 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 6 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 6 |
| Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 6 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 6 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Offside Front engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 6 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.2| | 6 |
| Fuel tank insecure front strap broken |7.2.1| | 6 |
| Offside Rear Lower Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 6 |
| Central Prop shaft joint excessively worn |6.1.7 |c| |i|| | 6 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 6 |
| Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 6 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 6 |
| Central Exhaust has a major leak of exhaust gases box |7.1.2| | 6 |
| Offside Front Electrical wiring insecure |1.9.2a| | 6 |
| Steering rack gaiter split |2.2.D.2d| | 6 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 6 |
| Offside Leaf spring to axle securing nut insecure |2.4.B.7b| | 6 |
| Nearside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 6 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 6 |
| Offside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 6 |
| Front Rear fog lamp tell tale not working |1.3.1b| | 6 |
| Offside Rear Lower Rear fog lamp not working |1.3.2b| | 6 |
| Offside Rear Statutory seat belt missing |5.1.A.1| | 6 |
| Nearside Rear Shock absorbers insecurely attached (5.3.2 (a) (i)) | 6 |
| Offside Towbar component excessively corroded |6.6.1| | 6 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 6 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 6 |
| Offside Macpherson strut insecure |2.4.G.1| | 6 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 6 |
| Nearside Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 6 |
| Nearside Inner Front constant velocity joint is insecure |2.5.C.1b| | 6 |
| Centre All position lamps not working |1.1.A.3b| | 6 |
| Nearside Rear Brake pipe excessively chafed |3.6.B.2c| | 6 |
| Offside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 6 |
| Nearside Inner Rear Road wheel badly damaged |4.2.A.1a| | 6 |
| Offside Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 6 |
| Nearside Rear Direction indicator missing |1.4.A.2b| | 6 |
| Rear Anti-roll bar pin or bush excessively worn both (5.3.4 (a) (i)) | 6 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 6 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 6 |
| Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 6 |
| Offside Inner Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 6 |
| Offside Front rear brake recording little or no effort |3.7.B.5a| | 6 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger |2.4.A.3| | 6 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 6 |
| Offside Rear brake drum in such a condition that it is seriously weakened |3.5.1i| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 6 |
| Front Fuel system component leaking (6.1.3 (b) (i)) | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 6 |
| Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 6 |
| Registration plate lamp issues | 6 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 6 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 6 |
| Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner panel |2.4.A.3| | 6 |
| Nearside Headlamp insecure (4.1.1 (c)) | 6 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 6 |
| Nearside Front Seat belt not functioning as intended |7.1.2 |c|| | 6 |
| Nearside Front Inner Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section |2.4.A.3| | 6 |
| Offside Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 6 |
| Offside Front Road wheel cracked |4.2.A.1a| | 6 |
| Offside Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 6 |
| Nearside Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Front Electrical wiring insecure |1.9.2a| | 6 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 6 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 6 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 6 |
| Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 6 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii|| | 6 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 6 |
| Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 6 |
| Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 6 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 6 |
| rear parking |secondary| brake grabbing severely |3.7.B.6b| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger |2.4.A.3| | 6 |
| Nearside Outer Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i)) | 6 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 6 |
| Offside Front Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 6 |
| Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 6 |
| Offside Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i)) | 6 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 6 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 6 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 6 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded Wing |2.4.A.3| | 6 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 6 |
| Nearside Rear Shock absorber has an excessively worn linkage |2.7.4| | 6 |
| Front Horn sounds harsh or grating |1.6.2e| | 6 |
| Offside Front Driver`s door does not latch securely closed |6.2.B.1a| | 6 |
| Offside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 6 |
| Offside Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 6 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 6 |
| Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 6 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 6 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 6 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 6 |
| Power steering component|s| inappropriately repaired |2.3.7| | 6 |
| Offside Rear Brake pedal does not operate a brake fitted to each wheel |3.3.A.3| | 6 |
| Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 6 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 6 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 6 |
| Offside Front drive shaft coupling is insecure |2.5.C.1c| | 6 |
| Offside Front Direction indicators incorrect colour |1.4.A.2f| | 6 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 6 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 6 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 6 |
| Offside Outer Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 6 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 6 |
| Offside All outline marker lamps not working (4.2.1 (a) (ii)) | 6 |
| Offside Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 6 |
| Offside Rear Anti-roll bar locating pin retaining device not properly locked |2.4.G.3b| | 6 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 6 |
| Nearside Outer Front position lamp|s| not working |1.1.A.3b| | 6 |
| Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 6 |
| Offside Rear Torsion bar attachment bracket loose |2.4.E.4a| | 6 |
| Nearside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger |5.3.6 |a| |i|| | 6 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 6 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 6 |
| Fuel tank insecure strap broken |6.1.3 |a| |i|| | 6 |
| Offside Rear Rear position lamp|s| not in good working order |not working| |1.1.4a| | 6 |
| Nearside Front brake disc excessively scored |3.5.1g| | 6 |
| Centre Front Hazard warning switch faulty |1.4.B.1d| | 6 |
| Offside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 6 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 6 |
| Offside Rear Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 6 |
| Nearside Headlamp not working on main beam |1.2.4a| | 6 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 6 |
| Offside Front Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 6 |
| Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 6 |
| Nearside Track rod end ball joint has excessive play (2.2.B.1f) | 6 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 6 |
| Offside All position lamps not in good working order |function impaired| |1.1.A.2a| | 6 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 6 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring |2.4.A.3| | 6 |
| Nearside Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 6 |
| Offside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible (5.3.1 (a) (ii)) | 6 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 6 |
| Offside Rear Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 6 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 6 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 6 |
| Prop shaft securing bolt loose (6.1.7 (a) (i)) | 6 |
| Wheel insecure |4.2.A.1c| | 6 |
| Rear Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 6 |
| Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 6 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 6 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 6 |
| Offside Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 6 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor/step |5.2.6| | 6 |
| Offside Power steering ram|s| leaking from a failed component |2.3.3b| | 6 |
| Offside Rear Brake cable locking device missing |3.5.1l| | 6 |
| Rear Spare wheel insecure |6.4.2| | 6 |
| Offside Front Direction indicator missing |1.4.A.2b| | 6 |
| Offside Rear Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 6 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 6 |
| Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 6 |
| Offside Rear Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 6 |
| Nearside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 6 |
| Power steering inoperative (2.1.5 (c) (i)) | 6 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 6 |
| Braking system leaking load sensing valve |3.6.A.1| | 6 |
| Rear Leaf spring splayed and action impaired |2.4.B.1c| | 6 |
| Suspension component mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 6 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 6 |
| Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 6 |
| Nearside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 6 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 6 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 6 |
| Nearside Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 6 |
| Offside Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 6 |
| Offside Rear Leaf spring anchor bracket cracked |2.4.B.6b| | 6 |
| Offside Rear Upper Rear position lamp|s| incomplete |1.1.4a| | 6 |
| Offside Headlamp aim not tested |4.1.2 |b|| | 6 |
| Offside Outer Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 6 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 6 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 6 |
| Offside Front Suspension arm ball joint dust cover missing |2.4.G.2| | 6 |
| Offside Front Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 6 |
| Fuel tank insecure tank strap broken |6.1.3 |a| |i|| | 6 |
| Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 6 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 6 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 6 |
| Nearside Front Ball joint ball pin shank loose |2.2.B.1c| | 6 |
| Nearside Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 6 |
| Nearside Rear Shock absorber missing |2.7.1b| | 6 |
| Offside Inner Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 6 |
| Nearside Suspension spring mounting prescribed area is fractured |2.4.A.3| | 6 |
| Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 6 |
| Nearside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Rear Leaf spring to axle securing bolt insecure |2.4.B.7b| | 6 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 6 |
| Offside Front drive shaft damaged |2.5.C.2a| | 6 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 6 |
| Nearside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 6 |
| Offside Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 6 |
| Offside Front Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 6 |
| Nearside Rear Lower Anti-roll bar worn and seriously weakened |2.4.G.1| | 6 |
| Offside Front Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 6 |
| Exhaust emissions exceed manufacturers specified limit 0.68 (8.2.2.2 (a)) | 6 |
| Brake servo defective or ineffective (1.1.10 (a) (i)) | 6 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 6 |
| Nearside Rear Torsion bar insecure at an end fixing |2.4.E.2| | 6 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Offside Front Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 6 |
| Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 6 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 6 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 6 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 6 |
| Nearside Side repeater flashing less than 60 times a minute |1.4.A.2g| | 6 |
| Nearside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 6 |
| Offside Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 6 |
| Front Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 6 |
| Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 6 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 6 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 6 |
| Offside Leaf spring cracked |2.4.B.1a| | 6 |
| Nearside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Nearside Rear Anti-roll bar locating pin locking device not properly locked |2.4.G.3b| | 6 |
| Nearside Rear brake drum in such a condition that it is seriously weakened |3.5.1i| | 6 |
| Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 6 |
| Parking brake lever insecure |3.1.3b| | 6 |
| Nearside Front Obligatory mirror missing |3.3 |a|| | 6 |
| Nearside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 6 |
| Nearside Front Inner Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount |2.4.A.3| | 6 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 6 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 6 |
| Offside Front brake disc excessively scored |3.5.1g| | 6 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 6 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount |2.4.A.3| | 6 |
| Offside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 6 |
| Offside Front brake disc locking device missing |3.5.1l| | 6 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 6 |
| Detachable tow ball has excessive play at receiver socket |6.6.4a| | 6 |
| Offside Leaf spring to axle securing bolt insecure |2.4.B.7b| | 6 |
| Brake pipe leaking front to rear |3.6.A.1| | 6 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 6 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 6 |
| Rear Suspension spring mounting prescribed area is excessively corroded both |2.4.A.3| | 6 |
| Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 6 |
| Front Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 6 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner valance |2.4.A.3| | 6 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 6 |
| Offside Driver`s view to front impaired by crack |6.9.1b| | 6 |
| Front coil spring fractured |2.4.C.1a| | 6 |
| Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 6 |
| Nearside Rear Brake load sensing valve defective and function impaired |3.6.E.3| | 6 |
| Nearside Front Seat belt retracting mechanism defective (7.1.2 (e)) | 6 |
| Rear Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 6 |
| Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 6 |
| passenger door cannot be opened from outside the vehicle bonnet |6.2.B.1c| | 6 |
| Position lamp not working |4.2.1 |a|| | 6 |
| Offside Direction indicator not working (4.4.1 (a) (ii)) | 6 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 6 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member |6.6.6| | 5 |
| Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Rear reflector missing |1.5.1a| | 5 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 5 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 5 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 5 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 5 |
| Offside Rear Body has a sharp edge caused by damage lamp |6.1.C.1| | 5 |
| Offside Outer Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
| Power steering pump drive system missing |2.3.6| | 5 |
| Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 5 |
| Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 5 |
| Offside Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 5 |
| Offside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 5 |
| Rear Suspension component mounting prescribed area is excessively corroded x member |2.4.A.3| | 5 |
| Centre Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 5 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 5 |
| Offside Front Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 5 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Centre Rear Towbar component insecure |6.6.1| | 5 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 5 |
| Front passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 5 |
| Offside Rear Rear reflector more than 50% obscured |1.5.1b| | 5 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 5 |
| Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 5 |
| Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 5 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis rail |3.3.A.2| | 5 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 5 |
| Front passenger door catch insecure |6.2.B.2| | 5 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 5 |
| Nearside Rear Direction indicator insecure |1.4.A.2b| | 5 |
| Nearside Inner Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| rear brake recording little or no effort both sides |3.7.B.5a| | 5 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp by indicator |1.1.A.3f| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x member |2.4.A.3| | 5 |
| Power steering component leaking rack |2.1.5 |a|| | 5 |
| Outer Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 5 |
| Nearside Front Front position lamp|s| missing |1.1.A.3a| | 5 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 5 |
| Offside Front Wheel insecure |4.2.A.1c| | 5 |
| Nearside Rear Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 5 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 5 |
| Offside Rear Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 5 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 5 |
| Central Prop shaft likely to become detached (6.1.7 (a) (ii)) | 5 |
| Leaf spring eye defective |anchor| |2.4.B.1b| | 5 |
| Offside Front Upper Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 5 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 5 |
| Offside Front Suspension arm has excessive play in a pin/bush wishbone rear bush |2.4.G.2| | 5 |
| Nearside Rear Upper Position lamp not working |4.2.1 |a|| | 5 |
| Offside Inner Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Front Body has a projection caused by corrosion wing |6.1.C.1| | 5 |
| Nearside Rear Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 5 |
| Offside Upper Rear position lamp|s| incomplete |1.1.4a| | 5 |
| Rear Anti-roll bar missing |2.4.G.1| | 5 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 5 |
| Nearside Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Brake pedal anti-slip provision loose |1.1.2 |c|| | 5 |
| Power steering component leaking steering rack |2.1.5 |a|| | 5 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 5 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 5 |
| Offside Inner Rear Statutory seat belt missing |5.1.1| | 5 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 5 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 5 |
| Nearside Rear Bonded suspension unit attachment loose |2.4.F.1a| | 5 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 5 |
| Nearside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Rear Rear fog lamp not in good working order |not working| |1.1.6b| | 5 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 5 |
| Offside Wheel nut|s| missing |4.2.A.1e| | 5 |
| Nearside Towbar component insecure |6.6.1| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 5 |
| Offside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 5 |
| Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 5 |
| Prop shaft bearing excessively worn x2 (6.1.7 (b) (i)) | 5 |
| Front Sub-frame insecure |2.4.G.1| | 5 |
| Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 5 |
| Offside Rear Seat belt stitching badly frayed |5.2.2b| | 5 |
| Nearside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 5 |
| Offside Upper Front position lamp|s| missing |1.1.A.3a| | 5 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 5 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 5 |
| Prop shaft joint excessively worn (6.1.7 (c) (i)) | 5 |
| Centre Braking system leaking |3.6.A.1| | 5 |
| Offside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 5 |
| Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 5 |
| Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 5 |
| Nearside Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
| Offside Front Anti-roll bar damaged and seriously weakened |2.4.G.1| | 5 |
| Nearside Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 5 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 5 |
| Nearside Rear Tie bar/rod rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Obligatory mirror missing (3.3 (a)) | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 5 |
| Nearside Outer Front Seat belt stitching badly frayed |5.2.2b| | 5 |
| Nearside Rear Anti-roll bar locating pin retaining device missing |2.4.G.3b| | 5 |
| Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 5 |
| Suspension component mounting prescribed area is excessively corroded both inner sills |2.4.A.3| | 5 |
| Steering lock fails to engage |2.1.4b| | 5 |
| Offside Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 5 |
| Nearside Front Lower Radius arm has excessive play in a pin/bush |2.4.G.2| | 5 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Offside Seat belt locking mechanism does not secure or release |5.1.B.6a| | 5 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle |2.4.A.3| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 5 |
| Nearside Front All position lamps not in good working order |function impaired| |1.1.A.2a| | 5 |
| Offside Rear All position lamps not in good working order |function impaired| |1.1.A.2a| | 5 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 5 |
| Offside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 5 |
| Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 5 |
| Central Statutory seat belt missing |5.1.1| | 5 |
| Nearside Inner Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Front Bumper likely to become detached (6.1.4 (a) (ii)) | 5 |
| Rear Floor in such a condition it is likely to cause load insecurity or instability (6.2.4 (a) (ii)) | 5 |
| Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 5 |
| Centre Brake pedal anti-slip provision missing |3.3.A.1b| | 5 |
| Offside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 5 |
| Nearside Front Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 5 |
| Offside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 5 |
| Offside Front Seat belt not functioning as intended (7.1.2 (c)) | 5 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 5 |
| Fuel tank insecure strap broken (6.1.3 (a) (i)) | 5 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 5 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 5 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 5 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 5 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 5 |
| Offside Rear All position lamps not working |4.2.1 |a|| | 5 |
| Oil leaking excessively from transmission |8.4.1 |a| |i|| | 5 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 5 |
| Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 5 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 5 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 5 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 5 |
| Nearside Front Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i)) | 5 |
| Nearside Front Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 5 |
| Offside Front Outline marker lamp missing (4.2.1 (a) (ii)) | 5 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 5 |
| Nearside Front Road wheel cracked |4.2.A.1a| | 5 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 5 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 5 |
| Front Upper All position lamps not working |1.1.A.3b| | 5 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 5 |
| Offside Upper Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 5 |
| Rear Stop lamp not working both sides |1.2.1b| | 5 |
| Trailer electrical socket likely to become detached |4.10 |a| |ii|| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 5 |
| Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 5 |
| Offside Rear Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Nearside Front Leaf spring eye defective |anchor| |2.4.B.1b| | 5 |
| Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 5 |
| Braking system leaking load valve |3.6.A.1| | 5 |
| Bonnet primary retaining device excessively deteriorated (3.1 (c)) | 5 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 5 |
| Nearside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 5 |
| Centre Rear Body has a sharp edge caused by damage |6.1.C.1| | 5 |
| Nearside Rear Lower Anti-roll bar linkage fractured |2.4.G.1| | 5 |
| Offside Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 5 |
| Offside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 5 |
| Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 5 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn |5.3.4 |a| |i|| | 5 |
| Offside Rear Leaf spring anchor pin or bush excessively worn |5.3.4 |a| |i|| | 5 |
| Brake fluid not visible (1.1.10 (d) (iii)) | 5 |
| Central Prop shaft bearing housing likely to fail |6.1.7 |f| |ii|| | 5 |
| Nearside Rear Anti-roll bar severely distorted |2.4.G.1| | 5 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 5 |
| Offside Front brake caliper locking device insecure |3.5.1l| | 5 |
| Prop shaft bearing excessively worn 2nd |6.1.7 |b| |i|| | 5 |
| Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c)) | 5 |
| Offside Front Side repeater not working |4.4.1 |a| |ii|| | 5 |
| Offside Front Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 5 |
| Rear All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 5 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 5 |
| Nearside Rear window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.9.7b| | 5 |
| Offside Rear Braking system leaking wheel cylinder |3.6.A.1| | 5 |
| Offside Front Body has a sharp edge caused by damage bumper |6.1.C.1| | 5 |
| Central Front Seat belt locking mechanism does not secure or release |5.2.5a| | 5 |
| Nearside Front Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 5 |
| Nearside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 5 |
| Front Brake master cylinder fluid level below minimum level |3.6.G.1e| | 5 |
| Offside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 5 |
| Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Steering locking device insecure |2.2.C.1g| | 5 |
| Towbar attachment insecure (6.1.6 (c) (i)) | 5 |
| Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 5 |
| Offside Rear Rear fog lamp not working (1.3.2b) | 5 |
| Nearside Front wheel bearing rough when rotated (2.5.A.2) | 5 |
| Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 5 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step (6.2.2 (d) (i)) | 5 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded above axle |2.4.A.3| | 5 |
| Offside Rear Headlamp not working on dipped beam |1.7.5a| | 5 |
| Offside Outer Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Rear Towbar component insecure |6.6.1| | 5 |
| Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 5 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 5 |
| Nearside Rear Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 5 |
| Nearside Front Main beam `tell-tale` not working |1.7.4c| | 5 |
| Nearside Outer Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 5 |
| Power steering ram|s| leaking from a failed joint |2.3.3b| | 5 |
| Offside Front Anti-roll bar insecure |2.4.G.1| | 5 |
| Nearside Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 5 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 5 |
| Offside Front Outer Body has a sharp edge caused by corrosion wing |6.1.C.1| | 5 |
| Rear Brake pipe excessively damaged |3.6.B.2c| | 5 |
| Offside Front Seat belt retracting mechanism defective |7.1.2 |e|| | 5 |
| Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 5 |
| Nearside passenger door cannot be opened from outside the vehicle side |6.2.B.1c| | 5 |
| Nearside Rear Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 5 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 5 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened |5.3.1 |b| |i|| | 5 |
| Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Front front parking |secondary| brakes imbalanced |3.7.B.6b| | 5 |
| Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 5 |
| Nearside Rear Upper Loading door cannot be secured in the closed position |6.4.1| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 5 |
| Horn control not readily accessible to the driver |1.6.1| | 5 |
| Nearside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 5 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 5 |
| Nearside Rear Leaf spring anchor bracket cracked |2.4.B.6b| | 5 |
| Offside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3| | 5 |
| Front Prop shaft securing bolt missing |6.1.7 |a| |i|| | 5 |
| Centre Brake cable has restricted free movement |3.5.1k| | 5 |
| Front Brake pedal anti-slip provision missing |3.3.A.1b| | 5 |
| Rear fog lamp tell tale inoperative |1.1.6e| | 5 |
| Offside Front Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 5 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 5 |
| Offside Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 5 |
| Offside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 5 |
| Nearside Leaf spring to axle securing nut insecure |2.4.B.7b| | 5 |
| Nearside Headlamp insecure |4.1.1 |c|| | 5 |
| Offside Headlamp insecure |4.1.1 |c|| | 5 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 5 |
| Offside Rear Brake cable damaged (1.1.15 (a)) | 5 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back panel |2.4.A.3| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back panel |2.4.A.3| | 5 |
| Nearside Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 5 |
| Nearside Front Obligatory mirror does not provide a view to the rear (3.3 (c)) | 5 |
| Nearside Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 5 |
| Nearside Front Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 5 |
| Offside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 5 |
| Rear front brake recording little or no effort |3.7.B.5a| | 5 |
| Nearside Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 5 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 5 |
| Offside Front Subframe mounting prescribed area is excessively corroded door step |2.4.A.3| | 5 |
| Rear Anti-roll bar pin or bush excessively worn both d bushes (5.3.4 (a) (i)) | 5 |
| Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 5 |
| Offside Front Seat belt obviously repaired |5.2.2c| | 5 |
| Nearside Front Seat belt anchorage loose (7.1.1 (b)) | 5 |
| Offside Front Seat belt buckle missing (7.1.2 (d)) | 5 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 5 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 5 |
| Rear Service brake lagging in operation |1.2.1 |d|| | 5 |
| Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 5 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 5 |
| Nearside Front Lower Track rod end ball joint has excessive play |2.2.B.1f| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 5 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 5 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 5 |
| Central Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 5 |
| Offside Front Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 5 |
| Central Front Seat belt retracting mechanism defective |5.2.5b| | 5 |
| Nearside Front Mechanical brake component securing device missing |3.5.1i| | 5 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 5 |
| Offside Rear Road wheel fixing loose (5.2.1 (a) (i)) | 5 |
| Nearside Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 5 |
| Offside Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 5 |
| Offside Tailgate cannot be secured in the closed position |6.4.1| | 5 |
| Offside Headlamp not working on main beam |1.2.4a| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 5 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 5 |
| Front Wheel nut|s| missing |4.2.A.1e| | 5 |
| Nearside Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 5 |
| Nearside Body has a sharp edge caused by damage wing mirror |6.1.C.1| | 5 |
| Offside Front Front passenger seat insecure |6.2.3| | 5 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 5 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 5 |
| Offside coil spring fractured |2.4.C.1a| | 5 |
| Offside Rear Anti-roll bar locating pin retaining device missing |2.4.G.3b| | 5 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear |5.3.4 |a| |i|| | 5 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 5 |
| Offside Front Brake disc insecure (1.1.14 (a) (ii)) | 5 |
| Nearside Front Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 5 |
| Nearside Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 5 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 5 |
| Nearside Inner Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab |5.2.6| | 5 |
| Front Lower Ball joint has excessive play |2.2.B.1f| | 5 |
| Nearside Front Lower Anti-roll bar linkage insecure |2.4.G.1| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 5 |
| Centre Rear engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 5 |
| Brake pump/compressor drive belt excessively deteriorated |3.6.F.1| | 5 |
| Nearside Front Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 5 |
| Offside Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 5 |
| Offside Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
| Rear Shock absorber insecure |2.7.2b| | 5 |
| Offside Rear Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
| Nearside wheel cylinder leaking |3.6.A.1| | 5 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing |6.1.A.1| | 5 |
| Rear Electrical wiring damaged, likely to cause a short |1.9.2b| | 5 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 5 |
| Offside Body has a sharp edge caused by corrosion sill |6.1.C.1| | 5 |
| Speedometer cannot be illuminated (7.8 (c) (ii)) | 5 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 5 |
| Nearside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Rear Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 5 |
| Rear front brakes release unevenly |3.7.B.4| | 5 |
| Offside Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 5 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 5 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 5 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 5 |
| Nearside Front Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 5 |
| Rear Anti-roll bar pin or bush excessively worn D bushes (5.3.4 (a) (i)) | 5 |
| Exhaust emits excessive smoke or vapour of any colour black |7.4.B.4| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 5 |
| Brake pipe excessively damaged |3.6.B.2c| | 5 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 5 |
| Centre Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 5 |
| Offside Front Trailing arm has excessive play in a ball joint |2.4.G.2| | 5 |
| Offside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 5 |
| Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 5 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 5 |
| Central Exhaust system insecure (6.1.2 (a)) | 5 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 5 |
| Offside Front Body has a sharp edge caused by corrosion step |6.1.C.1| | 5 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 5 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 5 |
| Power steering pump leaking |2.1.5 |a|| | 5 |
| Nearside Upper Rear position lamp|s| missing |1.1.A.3a| | 5 |
| Front Exhaust has a part missing |7.1.1a| | 5 |
| Centre Rear Body insecure and dangerous to other road users |6.1.B.1b| | 5 |
| Nearside Front Outer Body has a sharp edge caused by corrosion sill |6.1.C.1| | 5 |
| Nearside Rear Seat belt cut causing the fibres to separate |5.1.B.3a| | 5 |
| Nearside Front Seat belt stitching incomplete |5.2.2b| | 5 |
| Nearside Front Front suspension retaining device ineffective |2.5.A.4| | 5 |
| Headlamp does not operate immediately when selected on main beam |1.7.4a| | 5 |
| Nearside Rear Lower Shock absorbers has an excessively worn bush |5.3.2 |c|| | 5 |
| Nearside Headlamp flickers when tapped lightly by hand |1.2.4c| | 5 |
| Nearside Front Front passenger seat insecure |6.2.3| | 5 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Nearside Rear Road wheel fixing loose (5.2.1 (a) (i)) | 5 |
| Offside Front Indicator tell tale inoperative |1.4.A.2a| | 5 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded of cab |5.2.6| | 5 |
| Offside Outline marker lamp missing (4.2.1 (a) (ii)) | 5 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 5 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 5 |
| Offside Front Steering rack insecure |2.2.B.1a| | 5 |
| Brake pump leaking |3.6.A.1| | 5 |
| Offside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 5 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 5 |
| Nearside Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 5 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 5 |
| Suspension component mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear outrigger |2.4.A.3| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 5 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 5 |
| Nearside Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 5 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outrigger |6.1.A.1| | 5 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 5 |
| Nearside Inner Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible (5.3.1 (a) (ii)) | 5 |
| Offside Windscreen wiper not working (3.4 (a)) | 5 |
| Nearside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii)) | 5 |
| Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 5 |
| Offside Brake pipe leaking |3.6.A.1| | 5 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 5 |
| Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 5 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 5 |
| Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 5 |
| Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 5 |
| Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 5 |
| Nearside Rear Valve stem seriously misaligned |4.1.D.1e| | 5 |
| Power steering inoperative and steering adversely affected |2.1.5 |c| |ii|| | 5 |
| Brake cable inappropriately repaired |3.5.1n| | 5 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 5 |
| Stop lamp not working x2 |1.2.1b| | 5 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 5 |
| Offside Front Front suspension locking device missing |2.5.A.4| | 5 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 5 |
| Nearside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 5 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 5 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 5 |
| Nearside Rear Side repeater not working |1.4.A.2c| | 5 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 5 |
| Offside engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 5 |
| Offside Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Rear Brake performance not tested |3.7.A.1| | 5 |
| Nearside Rear Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 5 |
| Nearside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 5 |
| Front Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 5 |
| Headlamp not working on main beam both (4.1.1 (a) (ii)) | 5 |
| Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 5 |
| Offside Front Tie bar/rod severely distorted |2.4.G.1| | 5 |
| Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under arch |2.4.A.3| | 5 |
| Front Service brake excessively fluctuating both (1.2.1 (e)) | 5 |
| Nearside Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Offside Front Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 5 |
| Offside Rear position lamp|s| not in good working order |not working| |1.1.4a| | 5 |
| Offside Front Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 5 |
| Offside Inner Front constant velocity joint is insecure |2.5.C.1b| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 5 |
| Nearside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 5 |
| Stop lamp(s) not working both (4.3.1 (a) (ii)) | 5 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 5 |
| Brake valve leaking load valve |3.6.A.1| | 5 |
| Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 5 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 5 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember |6.2.2 |d| |i|| | 5 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 5 |
| Nearside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 5 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch |5.3.6 |a| |i|| | 5 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 5 |
| Nearside Outer Front Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 5 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 5 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 5 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 5 |
| Centre Rear Parking brake lever has no reserve travel |3.1.6b| | 5 |
| Nearside Battery insecure |1.9.1| | 5 |
| Nearside Rear Brake valve insecurely mounted chassis corroded |3.6.A.2a| | 5 |
| Exhaust emissions exceed manufacturer`s specified limit 1.19 |8.2.2.2 |a|| | 5 |
| Rear rear brake recording little or no effort both |3.7.B.5a| | 5 |
| Offside Rear Parking brake not fitted on at least two wheels |3.1.1| | 5 |
| Nearside Inner Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 5 |
| Offside Front Road wheel distorted |4.2.A.1a| | 5 |
| Nearside All outline marker lamps not working (4.2.1 (a) (ii)) | 5 |
| Offside Front Seat belt affected by a cracked seat frame |5.2.1b| | 5 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 5 |
| Rear Leaf spring splayed and fouling |2.4.B.1c| | 5 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 5 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 5 |
| Nearside Rear Brake cable damaged (1.1.15 (a)) | 5 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 5 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Nearside Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 5 |
| Brake pipe kinked |3.6.B.2b| | 5 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 5 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 5 |
| Nearside Rear Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle |2.4.A.3| | 5 |
| Offside Inner Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 5 |
| Rear fog lamp tell tale missing |1.3.1b| | 5 |
| Centre Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 5 |
| Nearside Front Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 5 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 5 |
| Offside Passenger`s seat insecure |6.2.A.1| | 5 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 5 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 5 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember |6.2.2 |d| |i|| | 5 |
| Rear Towbar component excessively damaged |6.6.1| | 5 |
| Nearside Front Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 5 |
| Driver`s seat security significantly reduced |6.5.14| | 5 |
| Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Seat belt damaged |7.1.2 |b| |i|| | 5 |
| Offside Rear Brake lining|s| contaminated |1.1.13 |b|| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 5 |
| Nearside Front Braking system leaking brake pipe |3.6.A.1| | 5 |
| Offside Rear Side repeater not working |1.4.A.2c| | 5 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 5 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 5 |
| Offside Front Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 5 |
| Nearside Direction indicator incomplete |1.5.A1b| | 5 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill |6.1.B.2| | 5 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D-bush |2.4.G.2| | 5 |
| Lower Steering pivot point has excessive play |2.2.B.1g| | 5 |
| Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 5 |
| Offside Front Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 5 |
| Nearside Front Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 5 |
| Offside Rear Seat belt retracting mechanism defective |5.1.B.6b| | 5 |
| Front Horn not working (7.7 (a)) | 5 |
| Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 5 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area |5.3.6 |a| |i|| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area |5.3.6 |a| |i|| | 5 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 5 |
| Power steering component|s| leaking Steering rack |2.3.3b| | 5 |
| Offside Headlamp flickers when tapped lightly by hand |1.2.4c| | 5 |
| Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 5 |
| Prop shaft joint excessively worn |6.1.7 |c| |i|| | 5 |
| Hazard warning lamps inoperative all |1.4.B.1b| | 5 |
| Rear Brake relay lever has restricted free movement |3.5.1k| | 5 |
| Nearside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Front Service brake imbalanced across an axle (1.2.1 (b) (i)) | 5 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting |2.4.A.3| | 5 |
| Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 5 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 5 |
| Offside Leaf spring longitudinally displaced |2.4.B.1d| | 5 |
| Offside Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 5 |
| Offside Exhaust system not adequately supported |7.1.1| | 5 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 5 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 5 |
| Exhaust emits clearly visible black smoke during acceleration |8.2.1.2 |g|| | 5 |
| Nearside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 5 |
| Rear Brake valve leaking (1.1.7 (d) (i)) | 5 |
| Driver`s door cannot be opened from inside the vehicle |6.2.3 |a|| | 5 |
| Rear Position lamp not working both (4.2.1 (a) (ii)) | 5 |
| Offside Rear Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 5 |
| Front wheel bearing rough when rotated o/s/f |2.5.A.2| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger |2.4.A.3| | 5 |
| Nearside Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 5 |
| Offside Rear Leaf spring anchor bracket fractured |2.4.B.6b| | 5 |
| Front Track rod end ball joint has excessive play both |2.2.B.1f| | 5 |
| Nearside Front Body has a sharp edge caused by damage wing |6.1.C.1| | 5 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mounting |2.4.A.3| | 5 |
| Offside Front Front drive shaft support bearing excessively worn |2.5.C.2c| | 5 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 5 |
| Nearside Rear Brake valve has an excessive discharge of oil |3.6.E.1| | 5 |
| Steering rack deformed and unserviceable |2.2.C.1d| | 5 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 5 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 5 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 5 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 5 |
| Drivers view of an obligatory external mirror materially affected by an obstruction (3.1 (a) (ii)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 5 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 5 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Offside Front Upper Body has a sharp edge caused by damage |6.1.C.1| | 5 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear |2.4.A.3| | 5 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii|| | 5 |
| Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 5 |
| Offside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Service brake application uneven across the axle |3.7.D.2b| | 5 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 5 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 5 |
| Offside Front Lower Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 5 |
| Steering arm has relative movement at its fixings |2.2.B.1h| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 5 |
| Nearside Shock absorber has an excessively worn bush |2.7.4| | 5 |
| Steering column universal joint insecure |2.1.5| | 5 |
| Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 5 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 5 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 5 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 5 |
| Nearside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 5 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 5 |
| Exhaust has a major leak of exhaust gases centre box |7.1.2| | 5 |
| Central Rear Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 5 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Exhaust has a major leak of exhaust gases centre |7.1.2| | 5 |
| Nearside Steering arm deformed and unserviceable |2.2.C.1d| | 5 |
| Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 5 |
| Front brake disc modified and seriously weakened |3.5.1n| | 5 |
| Offside Front Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 5 |
| Centre Rear Electrical wiring insecure |1.9.2a| | 5 |
| Nearside Rear Leaf spring shackle bracket cracked |2.4.B.6b| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor |2.4.A.3| | 5 |
| Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 5 |
| Nearside Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 5 |
| Offside Front Lower Radius arm has excessive play in a pin/bush |2.4.G.2| | 5 |
| Front Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 5 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 5 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 5 |
| Offside Front Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 5 |
| Offside Outer Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step area |5.2.6| | 5 |
| Nearside Front Windscreen wiper not working |3.4 |a|| | 5 |
| Offside Front Lower Front position lamp|s| not working |1.1.A.3b| | 5 |
| Fuel system component leaking |6.7.1a| | 5 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 5 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger |5.3.6 |a| |i|| | 5 |
| Offside Rear Passenger`s seat security significantly reduced |6.5.14| | 5 |
| Emissions not tested |6.4| | 5 |
| Nearside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Front Front drive shaft coupling is insecure |2.5.C.1c| | 5 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 5 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner door step |5.2.6| | 5 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 5 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting |2.4.A.3| | 5 |
| Offside Track rod end ball joint has excessive play (2.2.B.1f) | 5 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 5 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 5 |
| Prop shaft likely to become detached (6.1.7 (a) (ii)) | 5 |
| Nearside Front All position lamps not working |4.2.1 |a|| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 5 |
| Offside Front Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
| Nearside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 5 |
| Nearside Rear Seat belt insecurely fixed to the seat |5.1.B.2a| | 5 |
| Stop lamp|s| remains on when the brakes are released |4.3.2 |a| |iii|| | 5 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 5 |
| Front position lamp|s| not in good working order |not working| |1.1.4a| | 5 |
| Nearside Rear Upper Front position lamp|s| not working |1.1.A.3b| | 5 |
| Offside Front Suspension arm pin or bush excessively worn lower arm rear bush |5.3.4 |a| |i|| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger |2.4.A.3| | 5 |
| Brake fluid not visible |1.1.10 |d| |iii|| | 5 |
| Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 5 |
| Offside Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 5 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 5 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers step |5.2.6| | 5 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 5 |
| Nearside Rear Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mount |2.4.A.3| | 5 |
| Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 5 |
| Offside Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 5 |
| Nearside Front Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 5 |
| Nearside Electrical wiring insecure |1.9.2a| | 5 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 5 |
| Nearside Headlamp levelling device inoperative |1.7.2| | 5 |
| Central Rear Seat belt missing (7.1.2 (a)) | 5 |
| Fuel tank leaking |6.1.3 |b| |i|| | 5 |
| Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 5 |
| Nearside Rear Leaf spring fitted in such a way that the axle is misaligned |2.4.B.1e| | 5 |
| Nearside Front Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mount |2.4.A.3| | 5 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 5 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 5 |
| Nearside Rear Lower Stop lamp not working |1.2.1b| | 5 |
| Offside Rear Leaf spring seriously weakened (5.3.1 (b) (i)) | 5 |
| Rear Service brake lagging in operation (1.2.1 (d)) | 5 |
| Offside Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 5 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 5 |
| Offside Rear Direction indicator insecure |1.4.A.2b| | 5 |
| Centre Front Lower Statutory seat belt missing |5.1.1| | 5 |
| Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 5 |
| front parking |secondary| brakes imbalanced |3.7.B.6b| | 5 |
| Nearside Outer Statutory seat belt missing |5.1.1| | 5 |
| Driver`s seat moving inadvertently |6.2.5 |b| |ii|| | 5 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 5 |
| Centre Front Upper Fuel system component leaking |7.2.3| | 5 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Nearside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 5 |
| Seat belt anchorage prescribed area is fractured |5.2.6| | 5 |
| Offside Inner Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting |2.4.A.3| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 5 |
| Nearside Inner Rear wheel bearing has excessive play |2.6.2| | 5 |
| Offside Inner Rear wheel bearing has excessive play |2.6.2| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 5 |
| Offside Outer Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Front Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 5 |
| Front Anti-roll bar missing |2.4.G.1| | 5 |
| Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 5 |
| Offside Rear Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 5 |
| Rear position lamp|s| not working both sides |1.1.A.3b| | 5 |
| Nearside Front Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 5 |
| Offside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.3| | 5 |
| Nearside coil spring fractured |2.4.C.1a| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring |2.4.A.3| | 5 |
| Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Brake cable locking device insecure |3.5.1l| | 5 |
| Inner Front position lamp|s| not working |1.1.A.3b| | 5 |
| Steering column locking device missing |2.1.6| | 5 |
| Offside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 5 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 5 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step |underside| |5.2.6| | 5 |
| Centre Brake cable insecure |3.5.1d| | 5 |
| Nearside Lower All position lamps not working |1.1.A.3b| | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger |2.4.A.3| | 5 |
| Front Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 5 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 5 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 5 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 5 |
| Offside Rear Rear reflector not red in colour |1.5.1d| | 5 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 5 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 5 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Nearside Electrical wiring inadequately supported |1.9.2a| | 5 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 5 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 5 |
| Rear Prop shaft joint so worn it is likely to fail |6.1.7 |c| |ii|| | 5 |
| Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 5 |
| Offside Front Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i)) | 5 |
| Nearside Front Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.9.7b| | 5 |
| Exhaust emits visible black smoke at idle |7.3.A.2b| | 5 |
| Offside Front Anti-roll bar severely distorted |2.4.G.1| | 5 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 5 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 4 |
| Offside wheel cylinder leaking |3.6.A.1| | 4 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 4 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 4 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 4 |
| Nearside Rear Road wheel fixing loose |5.2.1 |a| |i|| | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 4 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting |5.3.6 |a| |i|| | 4 |
| Track rod end ball joint has excessive play both sides |2.2.B.1f| | 4 |
| Offside Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Rear Headlamp not working on main beam |1.7.5a| | 4 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded arch |2.4.A.3| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 4 |
| Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 4 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 4 |
| Nearside Leaf spring cracked |2.4.B.1a| | 4 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 4 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 4 |
| Nearside Front Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 4 |
| Nearside Wheel nut|s| missing |4.2.A.1e| | 4 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch |6.2.2 |d| |i|| | 4 |
| Offside Rear Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 4 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 4 |
| Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 4 |
| Offside Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 4 |
| Nearside passenger door hinge insecure |6.2.B.2| | 4 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 4 |
| Nearside Front Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 4 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 4 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 4 |
| Brake rod has restricted free movement |3.5.1k| | 4 |
| Fuel system component leaking top of engine |7.2.3| | 4 |
| Brake pedal does not operate a brake fitted to each wheel |3.3.A.3| | 4 |
| Rear Shock absorber has a serious fluid leak both sides |2.7.3| | 4 |
| Wheel nut|s| missing |4.2.A.1e| | 4 |
| Nearside Front Headlamp flickers when tapped lightly by hand |1.2.4c| | 4 |
| Nearside Front Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 4 |
| Rear Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 4 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 4 |
| Offside Rear All direction indicators incorrect colour |4.4.3 |a|| | 4 |
| Nearside Rear Body has a sharp edge caused by corrosion sill |6.1.C.1| | 4 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 4 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired sill |2.4.A.3| | 4 |
| Nearside Front Steering rack deformed and unserviceable |2.2.C.1d| | 4 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 4 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 4 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 4 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 4 |
| Nearside Front Exhaust system not adequately supported |7.1.1| | 4 |
| Nearside Front Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Front Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under arch |2.4.A.3| | 4 |
| Power steering pipe|s| or hose|s| leaking from a joint at rack |2.3.3b| | 4 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 4 |
| Central Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 4 |
| Offside Rear Electrical wiring inadequately supported |1.9.2a| | 4 |
| Offside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 4 |
| Front Exhaust system insecure |6.1.2 |a|| | 4 |
| Nearside Front Cab steps so insecure it is likely to cause injury |6.2.8 |a| |ii|| | 4 |
| Electrical wiring damaged and bare connector exposed |1.9.2c| | 4 |
| Exhaust emits excessive smoke or vapour of any colour black smoke |7.4.B.4| | 4 |
| Nearside front brake juddering severely |3.8.A.2b| | 4 |
| Nearside Obligatory mirror missing |6.6.1a| | 4 |
| Offside Front Upper Horn not working |1.6.2a| | 4 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 4 |
| Nearside Outer Rear Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Front Track rod end ball joint has excessive play both sides |2.2.B.1f| | 4 |
| Offside Front Macpherson strut has excessive play in the sliding bush or gland |2.5.B.1b| | 4 |
| Nearside Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 4 |
| Parking brake inoperative on one side |1.4.1 |a|| | 4 |
| Nearside Rear Upper Direction indicator not working |1.4.A.2c| | 4 |
| Brake lining|s| less than 1.5 mm thick |3.5.1g| | 4 |
| Offside Rear Hazard warning lamps inoperative (4.4.1 (e)) | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 4 |
| Offside Front position lamp|s| not working sidelight |1.1.A.3b| | 4 |
| Offside Outer Body has a sharp edge caused by damage |6.1.C.1| | 4 |
| Mechanical brake component securing device missing |3.5.1i| | 4 |
| Nearside Main beam `tell-tale` not working |1.7.4c| | 4 |
| Offside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 4 |
| Front Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount |2.4.A.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i|| | 4 |
| Offside Front Anti-lock braking system component missing |3.4.2| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker |2.4.A.3| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 4 |
| Nearside Suspension component mounting prescribed area is fractured |2.4.A.3| | 4 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded which significantly reduces the original strength |3.1.7| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 4 |
| Offside Outer Rear Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Offside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 4 |
| Offside Front Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Nearside Front Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 4 |
| Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch |6.1.A.1| | 4 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle area |2.4.A.3| | 4 |
| Nearside Front Lower Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 4 |
| Nearside Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Rear fog lamp not in good working order |not working| |1.1.6b| | 4 |
| Nearside Inner Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Inner Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 4 |
| Centre Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 4 |
| Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 4 |
| Front Fuel pipe union leaking |7.2.3| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 4 |
| Front Brake clevis joint has restricted free movement |3.5.1k| | 4 |
| Brake clevis joint has restricted free movement |3.5.1k| | 4 |
| Offside Front passenger seat insecure |6.2.3| | 4 |
| Nearside Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 4 |
| Offside Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 4 |
| Offside Outer Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 4 |
| Nearside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 4 |
| Fuel system component leaking engine bay |7.2.3| | 4 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 4 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 4 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 4 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 4 |
| Offside Front Seat belt retracting mechanism defective (7.1.2 (e)) | 4 |
| Offside Front Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 4 |
| Steering locking device insecure |2.2.C.1g| | 4 |
| Lower Steering column retaining device insecure |2.1.6| | 4 |
| Offside Rear Rear fog lamp flickers when tapped lightly by hand |1.1.6d| | 4 |
| Rear Service brake excessively binding (1.2.1 (f)) | 4 |
| Nearside Front Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i)) | 4 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 4 |
| Nearside brake drum contaminated by brake fluid |3.5.1h| | 4 |
| Nearside Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Outer Seat belt locking mechanism does not secure or release |5.2.5a| | 4 |
| Offside Front Suspension arm pin or bush excessively worn Rear bush |5.3.4 |a| |i|| | 4 |
| Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 4 |
| Front All position lamps not working |4.2.1 |a|| | 4 |
| Rear All position lamps not working |4.2.1 |a|| | 4 |
| Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 4 |
| Leaf spring eye defective |shackle| |2.4.B.1b| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Out rigger |2.4.A.3| | 4 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 4 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 4 |
| Offside Front Cab steps so insecure it is likely to cause injury |6.2.8 |a| |ii|| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outrigger |2.4.A.3| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 4 |
| Nearside Front suspension retaining device ineffective |2.5.A.4| | 4 |
| Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Centre Front Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 4 |
| Centre Front engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 4 |
| Offside Front Lower Suspension arm locating pin insecure |2.4.G.3a| | 4 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 4 |
| Offside Front Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 4 |
| Offside Upper Obligatory mirror missing |8.1.1| | 4 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 4 |
| Nearside Front rear brake excessively fluctuating |3.7.B.3| | 4 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 4 |
| Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 4 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 4 |
| Nearside Front Suspension arm pin or bush excessively worn Rear bush |5.3.4 |a| |i|| | 4 |
| Offside Rear Lower Stop lamp not working |1.2.1b| | 4 |
| Centre Rear Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 4 |
| Nearside Rear Leaf spring seriously weakened (5.3.1 (b) (i)) | 4 |
| Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 4 |
| Rear Rear reflector missing |1.5.1a| | 4 |
| Offside Rear Upper Outline marker lamp not working |4.2.1 |a|| | 4 |
| Offside Braking system leaking |3.6.A.1| | 4 |
| Front Service brake lagging in operation (1.2.1 (d)) | 4 |
| Offside Front Outer Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 4 |
| Offside Front Body has a projection caused by damage bumper |6.1.C.1| | 4 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 4 |
| Steering column shaft retaining device insecure |2.1.6| | 4 |
| Nearside Front Headlamp does not operate immediately when selected on main beam |1.7.4a| | 4 |
| Offside Rear Anti-roll bar locating pin locking device missing |2.4.G.3b| | 4 |
| Offside Rear Tie bar/rod locating pin locking device not properly locked |2.4.G.3b| | 4 |
| Front Windscreen in an unacceptable condition |3.2 |c| |i|| | 4 |
| Nearside Rear Anti-roll bar linkage inappropriately repaired |2.4.A.2| | 4 |
| Nearside Towbar locking device missing |6.6.3b| | 4 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush rear |2.4.G.2| | 4 |
| Nearside Rear Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 4 |
| Nearside Front Obligatory mirror insecure |3.3 |b| |ii|| | 4 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 4 |
| Speed limiter not fitted |6.9.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear out rigger |2.4.A.3| | 4 |
| Nearside Front Fuel tank insecure strap broken |7.2.1| | 4 |
| Nearside Rear Fuel tank insecure |7.2.1| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting |2.4.A.3| | 4 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 4 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values |8.2.2.2 |f|| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 4 |
| Offside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 4 |
| Front Front position lamp|s| not working both sides |1.1.A.3b| | 4 |
| Offside Front Steering rack deformed and unserviceable |2.2.C.1d| | 4 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 4 |
| Drive shaft uj which forms part of the suspension has a missing flange bolt |2.4.G.4c| | 4 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 4 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step holed (5.3.6 (a) (i)) | 4 |
| Nearside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 4 |
| Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Trailer electrical socket |13 pin| not functioning at all |4.10 |c| |ii|| | 4 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 4 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 4 |
| Nearside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 4 |
| Offside Front All position lamps not working |4.2.1 |a|| | 4 |
| Offside Rear Tailgate cannot be secured in the closed position |6.4.1| | 4 |
| Exhaust catalytic converter missing where one was fitted as standard |8.2.2.1 |a|| | 4 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 4 |
| Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b)) | 4 |
| Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 4 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 4 |
| Brake load sensing valve linkage defective and function impaired seized (1.1.17 (a)) | 4 |
| Centre Exhaust has a major leak of exhaust gases silencer |7.1.2| | 4 |
| Nearside Upper Rear position lamp|s| incomplete |1.1.4a| | 4 |
| Nearside Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 4 |
| Offside Front Upper brake caliper securing device loose |3.5.1j| | 4 |
| Central Rear Prop shaft bearing housing likely to fail |6.1.7 |f| |ii|| | 4 |
| Offside Front Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 4 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Rear Anti-roll bar pin or bush excessively worn both D bushes (5.3.4 (a) (i)) | 4 |
| Brake load sensing valve missing where fitted as standard (1.1.17 (d)) | 4 |
| Oil leaking excessively from transmission (8.4.1 (a) (i)) | 4 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 4 |
| Windscreen wiper control missing |8.2.1a| | 4 |
| Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 4 |
| Nearside Rear Lower Tie bar/rod insecure |2.4.G.1| | 4 |
| Nearside Rear Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 4 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer door step |5.2.6| | 4 |
| Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 4 |
| Centre Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Front Driver`s door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 4 |
| Nearside Seat belt damaged (7.1.2 (b) (i)) | 4 |
| Offside Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 4 |
| Nearside Rear position lamp|s| incorrect colour lens broken |1.1.A.3e| | 4 |
| Nearside Rear Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 4 |
| Brake lever has restricted free movement |1.1.15 |e|| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded innersill |2.4.A.3| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 4 |
| Nearside Outer Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 4 |
| Nearside Rear Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 4 |
| Offside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 4 |
| Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 4 |
| Offside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 4 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Door step |7.1.1 |a| |i|| | 4 |
| Offside Front Steering system excessively rough |2.2.D.1| | 4 |
| Nearside Front Lower Suspension arm insecure |2.4.G.1| | 4 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 4 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii)) | 4 |
| Rear passenger door catch insecure |6.2.B.2| | 4 |
| Nearside Front Lower Suspension component ball joint likely to become detached |5.3.4 |a| |ii|| | 4 |
| Nearside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 4 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle |6.1.1 |c| |i|| | 4 |
| Rear Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Offside Front Main beam `tell-tale` not working |1.7.4c| | 4 |
| Nearside Inner Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 4 |
| Nearside Rear Lower Body has a projection caused by corrosion |6.1.C.1| | 4 |
| Offside Rear Lower Body has a projection caused by corrosion |6.1.C.1| | 4 |
| Nearside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
| Nearside Front brake disc has restricted free movement |3.5.1j| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 4 |
| Offside Front Lower Anti-roll bar linkage insecure |2.4.G.1| | 4 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock mount |2.4.A.3| | 4 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 4 |
| Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 4 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
| Offside All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
| Nearside Front Valve stem seriously damaged |5.2.3 |j|| | 4 |
| Offside Front Valve stem seriously damaged |5.2.3 |j|| | 4 |
| Centre Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Anti-roll bar has excessive play in a pin/bush both rear |2.4.G.2| | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outrigger |5.2.6| | 4 |
| Nearside Front Subframe mounting prescribed area is severely distorted |2.4.A.3| | 4 |
| Nearside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 4 |
| Nearside Front brake disc contaminated by brake fluid |3.5.1h| | 4 |
| Offside Front Lower Suspension arm insecure |2.4.G.1| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch |2.4.A.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 4 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 4 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to floor |2.4.A.3| | 4 |
| Nearside Front drive shaft coupling is excessively worn |2.5.C.1c| | 4 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 4 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 4 |
| Offside Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 4 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.A.1| | 4 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Nearside Rear Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 4 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 4 |
| Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 4 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 4 |
| Offside Rear Direction indicator missing |1.4.A.2b| | 4 |
| Nearside Rear Hydraulic brake cylinder leaking and braking performance affected |1.1.16 |b| |ii|| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 4 |
| Nearside Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Front Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 4 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 4 |
| Offside Front brake disc modified and seriously weakened |3.5.1n| | 4 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 4 |
| Nearside Front Side repeater flashing more than 120 times a minute |1.4.A.2g| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 4 |
| Offside Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 4 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet |6.1.A.1| | 4 |
| Brake pedal reservoir fluid level decreases after several brake applications |3.3.C.1| | 4 |
| Offside Rear Shock absorbers has an excessively worn bush |5.3.2 |c|| | 4 |
| Offside Rear Wheel insecure |4.2.A.1c| | 4 |
| Nearside Rear Leaf spring to axle securing nut missing |2.4.B.7b| | 4 |
| Nearside Rear Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 4 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 4 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis rails |2.4.A.3| | 4 |
| Nearside Rear Suspension has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 4 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both |2.4.G.2| | 4 |
| Offside Rear Leaf spring shackle bracket damaged and seriously weakened |2.4.B.6d| | 4 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis under wheel arch |2.4.A.3| | 4 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 4 |
| Offside Front Driver`s door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 4 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 4 |
| Nearside Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 4 |
| Offside Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/outrigger |2.4.A.3| | 4 |
| Offside Front Steering locking device missing |2.2.C.1g| | 4 |
| Nearside Outer Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 4 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3| | 4 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i)) | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i)) | 4 |
| Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 4 |
| Nearside Front Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 4 |
| Emissions not tested due to excessive smoke (8.2.2.2 (e)) | 4 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Nearside Inner Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Centre Front Lower Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 4 |
| Nearside Stop lamp missing |1.2.1a| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i)) | 4 |
| Rear Brake cable locking device insecure |3.5.1l| | 4 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount |5.3.6 |a| |i|| | 4 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 4 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 4 |
| Centre Rear Passenger`s seat insecure |6.2.A.1| | 4 |
| Centre Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 4 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area |5.3.6 |a| |i|| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded innersill |2.4.A.3| | 4 |
| Offside Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Offside Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 4 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i)) | 4 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 4 |
| Centre Fuel pipe insecure |7.2.1| | 4 |
| Leaf spring to axle securing bolt insecure |2.4.B.7b| | 4 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 4 |
| Nearside Front Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 4 |
| Nearside Inner Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 4 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 4 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle (6.1.1 (c) (i)) | 4 |
| Front Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet (5.3.6 (a) (i)) | 4 |
| Nearside Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 4 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 4 |
| Offside Front Obligatory mirror insecure (3.3 (b) (ii)) | 4 |
| Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
| Brake valve retaining device missing |3.6.A.2d| | 4 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear |5.3.4 |a| |i|| | 4 |
| Nearside Front Track rod end socket spring weak |2.2.B.1e| | 4 |
| Offside Front Upper Obligatory mirror missing |8.1.1| | 4 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner step |2.4.A.3| | 4 |
| Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 4 |
| Stop lamp adversely affected by the operation of another lamp both |1.2.1f| | 4 |
| passenger door cannot be opened from outside the vehicle sliding door |6.2.B.1c| | 4 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 4 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Rear Brake load sensing valve inoperative and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 4 |
| Stop lamp not working BOTH |1.2.1b| | 4 |
| Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 4 |
| Nearside Inner Drag link end ball joint has excessive play |2.2.B.1f| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount |5.3.6 |a| |i|| | 4 |
| Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 4 |
| Offside Inner Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 4 |
| Nearside Rear Upper Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 4 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills corroded through |6.1.B.2| | 4 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 4 |
| Offside Front All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 4 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened (5.3.1 (b) (i)) | 4 |
| Offside Stop lamp adversely affected by the operation of another lamp indicator |1.2.1f| | 4 |
| Power steering inoperative |2.1.5 |c| |i|| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 4 |
| Speedometer dial glass broken |6.7.2| | 4 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 4 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 4 |
| Nearside Front Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Rear Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Nearside Front Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Offside Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 4 |
| Offside Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Nearside Front Windscreen wiper blade deteriorated |6.1.2| | 4 |
| Nearside Rear Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 4 |
| Offside Rear Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 4 |
| Rear brake drum in such a condition that it is seriously weakened |3.5.1i| | 4 |
| Offside Rear Upper Exhaust system not adequately supported |7.1.1| | 4 |
| Front Exhaust has a major leak of exhaust gases |6.3.2a| | 4 |
| Nearside Front brake disc modified and seriously weakened |3.5.1n| | 4 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 4 |
| Front Power steering pump drive system defective |2.3.6| | 4 |
| Nearside Front Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 4 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount (5.3.6 (a) (i)) | 4 |
| Offside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Steering column flexible coupling is excessively deteriorated |2.1.5| | 4 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 4 |
| Nearside Inner Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 4 |
| Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 4 |
| Offside Front Headlamp does not operate immediately when selected on main beam |1.7.4a| | 4 |
| Offside Front Windscreen wiper not working |3.4 |a|| | 4 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill |6.1.B.2| | 4 |
| Offside Front Body panel corroded and likely to cause injury Wing |6.2.1 |a| |i|| | 4 |
| Offside Front Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 4 |
| Offside Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 4 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 4 |
| Nearside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 4 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 4 |
| Offside Front Front position lamp|s| missing |1.1.A.3a| | 4 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near rear spring hanger |2.4.A.3| | 4 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 4 |
| Nearside Outer Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
| Nearside Front Body has a sharp edge caused by damage bumper |6.1.C.1| | 4 |
| Nearside Front Fuel cap/sealing device missing |7.2.4a| | 4 |
| Offside Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 4 |
| Windscreen wiper blade missing |8.2.2| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 4 |
| Nearside Rear Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 4 |
| Offside Front Side repeater missing |4.4.1 |a| |ii|| | 4 |
| Offside Front Bumper likely to become detached |6.1.4 |a| |ii|| | 4 |
| Nearside Front Steering arm damaged and unserviceable |2.2.C.1d| | 4 |
| Nearside Body has a sharp edge caused by corrosion sliding door |6.1.C.1| | 4 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 4 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 4 |
| Centre Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 4 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innerwing |6.1.B.2| | 4 |
| Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 4 |
| Headlamp aim beam image obviously incorrect both |1.8.A.1b| | 4 |
| Steering system excessively rough |2.1.1 |a|| | 4 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 4 |
| Nearside Rear Wheel stud hole elongated |4.2.A.1d| | 4 |
| Offside Front Upper coil spring fractured |2.4.C.1a| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 4 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 4 |
| Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 4 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 4 |
| Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii|| | 4 |
| Offside Front Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 4 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 4 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 4 |
| Nearside Rear Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 4 |
| Offside Cab steps so insecure it is likely to cause injury (6.2.8 (a) (ii)) | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 4 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 4 |
| Nearside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 4 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 4 |
| Rear Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 4 |
| Nearside Rear Rear reflector not red in colour |1.5.1d| | 4 |
| Rear Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 4 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush front |2.4.B.2| | 4 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded of cab |5.2.6| | 4 |
| Offside Front Brake hose kinked |3.6.B.4b| | 4 |
| Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 4 |
| Exhaust emissions exceed manufacturer`s specified limit 1.22 |8.2.2.2 |a|| | 4 |
| Nearside Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring |2.4.A.3| | 4 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch/floor |6.1.B.2| | 4 |
| Offside Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 4 |
| Nearside Seat belt retracting mechanism defective (7.1.2 (e)) | 4 |
| Nearside Inner Front Brake pipe leaking |3.6.A.1| | 4 |
| Nearside Front Bonded suspension unit bonding failed and part of the unit is likely to become displaced |2.4.F.2| | 4 |
| Offside Rear Lower Torsion bar excessive play at an end fixing |2.4.E.2| | 4 |
| Rear Prop shaft likely to become detached (6.1.7 (a) (ii)) | 4 |
| Nearside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 4 |
| Nearside Rear Body has a sharp edge caused by corrosion wing |6.1.C.1| | 4 |
| Nearside Front Body insecure and dangerous to other road users bumper insecure |6.1.B.1b| | 4 |
| Offside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 4 |
| Offside Front Subframe mounting prescribed area is severely distorted |2.4.A.3| | 4 |
| Offside Inner Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner valance |2.4.A.3| | 4 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded marked yellow (6.1.1 (c) (i)) | 4 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 4 |
| Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Front Obligatory mirror seriously damaged affecting the rear view |6.6.1b| | 4 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 4 |
| Rear Brake pivot has restricted free movement |3.5.1k| | 4 |
| Front Steering rack gaiter split |2.2.D.2d| | 4 |
| front brake grabbing severely |3.7.A.2b| | 4 |
| Central Front Seat belt buckle missing (7.1.2 (d)) | 4 |
| Towbar component excessively worn |6.6.1| | 4 |
| Offside Rear Leaf spring anchor bracket damaged and seriously weakened |2.4.B.6d| | 4 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step |7.1.1 |a| |i|| | 4 |
| Offside Front Body has a sharp edge caused by corrosion arch |6.1.C.1| | 4 |
| Offside Front Lower Suspension arm severely distorted |2.4.G.1| | 4 |
| Offside Brake cable knotted |3.5.1b| | 4 |
| Nearside Outer Rear Seat belt retracting mechanism defective |5.2.5b| | 4 |
| Offside Outer Rear Seat belt retracting mechanism defective |5.2.5b| | 4 |
| Nearside Front Macpherson strut mounting corroded and seriously weakened |5.3.3 |b| |i|| | 4 |
| Offside Outer Front constant velocity joint is excessively worn |2.5.C.1b| | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step underside |5.2.6| | 4 |
| Nearside Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Offside Upper Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Nearside Front Brake hose kinked |3.6.B.4b| | 4 |
| Nearside Front Seat belt buckle missing (7.1.2 (d)) | 4 |
| Nearside Rear Leaf spring main leaf fractured front eye (5.3.1 (b) (ii)) | 4 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Nearside Rear Floor excessively deteriorated |6.2.4 |a| |i|| | 4 |
| Parking brake lever, pawl mechanism pivot|s| retaining device insecure |3.1.4b| | 4 |
| Nearside Rear Upper Brake valve leaking |3.6.A.1| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 4 |
| Nearside Front Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 4 |
| Nearside Front Upper Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 4 |
| Rear Leaf spring cracked |2.4.B.1a| | 4 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 4 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 4 |
| Offside Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 4 |
| Offside Leaf spring anchor bracket loose |2.4.B.6a| | 4 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened |5.3.1 |b| |i|| | 4 |
| Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 4 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 4 |
| Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Suspension component mounting prescribed area is excessively corroded offside inner sill |2.4.A.3| | 4 |
| Offside Rear wheel cylinder has restricted free movement |3.5.1k| | 4 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp by indicator |1.1.A.3f| | 4 |
| Nearside Front Side repeater missing (4.4.1 (a) (ii)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 4 |
| Offside Front Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 4 |
| Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Nearside Leaf spring eye defective |shackle| |2.4.B.1b| | 4 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 4 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front |2.4.A.3| | 4 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 4 |
| Offside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 4 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 4 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outer sill |6.1.B.2| | 4 |
| Offside Driver`s door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 4 |
| Nearside Outer Front Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis |6.6.6| | 4 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis |6.6.6| | 4 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 4 |
| Driving control|s| clutch pedal anti-slip provision missing |6.8.3| | 4 |
| Offside Front Rear fog lamp tell tale not working |1.3.1b| | 4 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp |1.3.2f| | 4 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 4 |
| Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 4 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 4 |
| Front Headlamp not in good working order |not working| |1.2.4a| | 4 |
| Nearside Rear Leaf spring saddle is fractured |2.4.B.7a| | 4 |
| Offside Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Rear Upper Brake load sensing valve seized |3.6.E.3| | 4 |
| Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 4 |
| Nearside Upper Obligatory mirror missing |8.1.1| | 4 |
| Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 4 |
| Offside Rear Seat belt buckle missing (7.1.2 (d)) | 4 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 4 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 4 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 4 |
| Offside Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 4 |
| Direction indicators incorrect colour |1.4.A.2f| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3| | 4 |
| Offside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Brake reservoir fluid level decreases after several pedal applications |3.3.C.1| | 4 |
| Nearside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii)) | 4 |
| Offside Rear Leaf spring to axle fixing bolt insecure |5.3.1 |a| |i|| | 4 |
| Offside Rear Hinged tailboard cannot be secured in the closed position |6.4.1| | 4 |
| Nearside Rear position lamp|s| not in good working order |function impaired| |1.1.4a| | 4 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 4 |
| Offside Inner Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Front front brake grabbing severely |3.7.A.2b| | 4 |
| Offside Inner Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 4 |
| Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 4 |
| Driver`s seat with a defective structure |6.2.5 |a| |i|| | 4 |
| Nearside Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 4 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 4 |
| Offside Inner Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 4 |
| Nearside Front Side repeater missing |4.4.1 |a| |ii|| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 4 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 4 |
| Offside Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 4 |
| Power steering component|s| leaking rack area |2.3.3b| | 4 |
| Brake rod locking device insecure |3.5.1l| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 4 |
| Entrance/exit door emergency control inoperative |6.2.C.2| | 4 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Front Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 4 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 4 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 4 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Nearside Side repeater missing |4.4.1 |a| |ii|| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 4 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 4 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 4 |
| Offside Front Lower Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 4 |
| Offside Front Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 4 |
| Power steering component|s| leaking from a failed seal steering rack |2.3.3b| | 4 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i)) | 4 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Anti-roll bar insecure |2.4.G.1| | 4 |
| Nearside Front Anti-lock braking system wiring excessively damaged |3.4.3| | 4 |
| Nearside Front Oil leaking excessively from engine |8.4.1 |a| |i|| | 4 |
| Offside Rear Direction indicator light intensity significantly reduced |4.4.3 |a|| | 4 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 4 |
| Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i)) | 4 |
| Steering column flexible coupling insecure |2.1.5| | 4 |
| Rear Upper Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Offside Rear Upper Direction indicator not working |1.4.A.2c| | 4 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mount |2.4.A.3| | 4 |
| Nearside Windscreen wiper blade deteriorated |6.1.2| | 4 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 4 |
| Exhaust has a major leak of exhaust gases |6.3.2a| | 4 |
| Offside Rear All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 4 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 4 |
| Front Service brake indicates brake judder |3.7.D.1| | 4 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |3.1.9| | 4 |
| Offside Front Lower Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 4 |
| Windscreen wiper not working |3.4 |a|| | 4 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch/floor |2.4.A.3| | 4 |
| Offside Rear fog lamp not visible from a reasonable distance |1.1.6b| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount |5.3.6 |a| |i|| | 4 |
| Rear Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 4 |
| Prop shaft bearing excessively worn centre |6.1.7 |b| |i|| | 4 |
| Nearside Seat belt cut causing the fibres to separate |5.1.B.3a| | 4 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 4 |
| Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 4 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed (6.1.1 (c) (i)) | 4 |
| Nearside Front Lower Trailing arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Nearside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Nearside Front All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 4 |
| Rear position lamp|s| not working Both |1.1.A.3b| | 4 |
| Offside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 4 |
| Upper Stop lamp not working |1.2.1b| | 4 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 4 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 4 |
| Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 4 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides |2.4.A.3| | 4 |
| Offside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 4 |
| Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 4 |
| Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger |5.3.6 |a| |i|| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts |2.4.A.3| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 4 |
| Nearside Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 4 |
| Offside Outer Rear Road wheel badly damaged |4.2.A.1a| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 4 |
| Nearside Rear Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 4 |
| Nearside Front Anti-lock braking system component missing |3.4.2| | 4 |
| Central Prop shaft bearing excessively worn both (6.1.7 (b) (i)) | 4 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 4 |
| Nearside Outer Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top |2.4.A.3| | 4 |
| Nearside Lower Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Front Exhaust system insecure (6.1.2 (a)) | 4 |
| Anti-lock braking system warning lamp does not illuminate |1.6 |a|| | 4 |
| Offside Rear Valve stem seriously misaligned |4.1.D.1e| | 4 |
| Offside Front Lower Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 4 |
| Nearside Rear Brake cable knotted |3.5.1b| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 4 |
| Centre Front Brake pipe inadequately clipped |3.6.B.1| | 4 |
| Rear Service brake grabbing severely (1.2.1 (c)) | 4 |
| Front Anti-roll bar fractured |2.4.G.1| | 4 |
| Nearside Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Front Power steering pipe/hose leaking |2.1.5 |a|| | 4 |
| Rear Rear position lamp|s| insecure |1.1.A.3a| | 4 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 4 |
| Rear Torsion bar excessive play at an end fixing |2.4.E.2| | 4 |
| Front Service brake imbalanced across an axle |1.2.1 |b| |i|| | 4 |
| Front Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 4 |
| Nearside Rear Direction indicator not in good working order |not working| |1.5.1b| | 4 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Offside Obligatory mirror missing |6.6.1a| | 4 |
| Nearside Driver`s view to front impaired by crack |6.9.1b| | 4 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp affected by indicator |1.1.A.3f| | 4 |
| Nearside Rear Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 4 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 4 |
| Offside Rear Towbar retaining device insecure |6.6.3a| | 4 |
| Brake lever has abnormal movement of levers indicating excessive wear |3.5.1f| | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded innersill |5.2.6| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 4 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear most sill |2.4.A.3| | 4 |
| Offside Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 4 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 4 |
| Offside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 4 |
| Offside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Nearside Front Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch area |2.4.A.3| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 4 |
| Offside Front Outer Body has a sharp edge caused by corrosion sill |6.1.C.1| | 4 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 4 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 4 |
| Offside Body has a sharp edge caused by damage mirror casing |6.1.C.1| | 4 |
| Nearside brake caliper has restricted free movement |3.5.1k| | 4 |
| Rear Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i)) | 4 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab |7.1.1 |a| |i|| | 4 |
| Front Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 4 |
| Nearside Rear Shock absorbers has an excessively worn bush |5.3.2 |c|| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mounting |2.4.A.3| | 4 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS |5.3.6 |a| |i|| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS |5.3.6 |a| |i|| | 4 |
| Nearside Front Body has a sharp edge caused by corrosion outer wing |6.1.C.1| | 4 |
| Nearside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 4 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 4 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 4 |
| Nearside Rear coil spring fractured |2.4.C.1a| | 4 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 4 |
| Nearside Inner Front Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 4 |
| Offside Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 4 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 4 |
| Offside Front Lower Bonded suspension unit attachment loose |2.4.F.1a| | 4 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 4 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 4 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 4 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 4 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember |6.1.A.1| | 4 |
| Offside Rear passenger door hinge insecure |6.2.B.2| | 4 |
| Offside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 4 |
| Nearside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area (7.1.1 (a) (i)) | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 4 |
| Offside Front Anti-roll bar missing |2.4.G.1| | 4 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger |5.3.6 |a| |ii|| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 4 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 4 |
| Nearside Seat belt not functioning as intended (7.1.2 (c)) | 4 |
| Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 4 |
| Offside Front Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 4 |
| Offside Front Inner Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
| Nearside Rear Service brake grabbing severely |3.7.C.2| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shock mount |2.4.A.3| | 4 |
| Nearside Front Suspension arm inappropriately repaired |2.4.A.2| | 4 |
| Offside Front Service brake application uneven across the axle |3.7.D.2b| | 4 |
| Offside Body has a sharp edge caused by damage door mirror |6.1.C.1| | 4 |
| Suspension component mounting prescribed area is excessively corroded both outer sills |2.4.A.3| | 4 |
| Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Body component damaged and likely to cause injury mirror |6.2.1 |a| |i|| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x2 |2.4.A.3| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop area |6.1.B.2| | 4 |
| Offside Front position lamp|s| not working side light |1.1.A.3b| | 4 |
| Nearside Front Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 4 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 4 |
| Brake pedal fouling on other parts of the vehicle |3.3.A.4| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mount |2.4.A.3| | 4 |
| Suspension component mounting prescribed area is excessively corroded both front inner wings |2.4.A.3| | 4 |
| Nearside Rear Body has a sharp edge caused by damage lamp |6.1.C.1| | 4 |
| Nearside Front Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 4 |
| Nearside Rear Parking brake not fitted on at least two wheels |3.1.1| | 4 |
| Nearside Leaf spring longitudinally displaced |2.4.B.1d| | 4 |
| Offside Front Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 4 |
| Nearside Rear Upper Stop lamp not working |1.2.1b| | 4 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Nearside Front Fuel hose leaking |7.2.3| | 4 |
| Nearside Windscreen wiper not working (3.4 (a)) | 4 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Offside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 4 |
| Nearside Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 4 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 4 |
| Centre Front Seat belt obviously repaired |5.2.2c| | 4 |
| Offside All direction indicators not working |4.4.1 |a| |ii|| | 4 |
| Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Brake pipe inappropriately repaired |3.6.A.3| | 4 |
| Offside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 4 |
| Supplementary Restraint System warning lamp indicates a fault air bag |5.4.2| | 4 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 4 |
| Nearside Hazard warning lamps inoperative (4.4.1 (e)) | 4 |
| Front Power steering component|s| leaking from a failed seal |2.3.3b| | 4 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 4 |
| Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 4 |
| Nearside Rear Towbar retaining device insecure |6.6.3a| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 4 |
| Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 4 |
| Rear Brake load sensing valve inoperative but ABS functioning |1.1.17 |c| |i|| | 4 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 4 |
| Offside Inner Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 4 |
| Offside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 4 |
| Nearside Front Side repeater incorrect colour (4.4.3 (a)) | 4 |
| Offside Front Side repeater incorrect colour (4.4.3 (a)) | 4 |
| Central Front Horn not working |7.7 |a| |ii|| | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.A.1| | 4 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Fuel system component leaking pump |7.2.3| | 4 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 4 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 4 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 4 |
| Offside Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 4 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 4 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/step (7.1.1 (a) (i)) | 4 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 4 |
| Nearside Front Steering locking device insecure |2.2.C.1g| | 4 |
| Nearside Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 4 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 4 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Offside Front Macpherson strut inappropriately repaired |2.4.A.2| | 4 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill back |2.4.A.3| | 4 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 4 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 4 |
| front brake binding both |3.7.B.1| | 4 |
| Nearside Front Front position lamp|s| not working sidelight |1.1.A.3b| | 4 |
| Offside Front Front position lamp|s| not working sidelight |1.1.A.3b| | 4 |
| Driver`s door cannot be opened from outside the vehicle |6.5.11a| | 4 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 4 |
| Rear Leaf spring eye defective |anchor| |2.4.B.1b| | 4 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 4 |
| Nearside Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Central Rear Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassi |2.4.A.3| | 4 |
| Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 4 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 4 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis next to fuel tank |5.2.6| | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch |6.2.2 |d| |i|| | 4 |
| Nearside Body has a sharp edge caused by damage mirror cover |6.1.C.1| | 4 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 4 |
| Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount (5.3.6 (a) (i)) | 4 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger area |2.4.A.3| | 4 |
| Offside Rear Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 4 |
| Nearside Front Bumper likely to become detached |6.1.4 |a| |ii|| | 4 |
| Offside Front Leaf spring fractured |2.4.B.1a| | 4 |
| Nearside Rear Lower Front position lamp|s| not working |1.1.A.3b| | 4 |
| Rear Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 4 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis |3.3.A.2| | 4 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 4 |
| Nearside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 4 |
| Nearside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 4 |
| Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 4 |
| Offside Outline marker lamp not working centre (4.2.1 (a) (ii)) | 4 |
| Offside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 4 |
| Fuel system component leaking filter housing (6.1.3 (b) (i)) | 4 |
| Headlamp not in good working order |not working| |1.2.4a| | 4 |
| Nearside Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 4 |
| Rear Seat belt retracting mechanism defective |5.1.B.6b| | 4 |
| Nearside Headlamp missing |1.7.3| | 4 |
| Front Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 4 |
| Nearside Inner Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Central Rear Prop shaft bearing housing insecure (6.1.7 (f) (i)) | 4 |
| Offside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner door step |5.2.6| | 4 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 4 |
| Fuel tank insecure front strap broken (6.1.3 (a) (i)) | 4 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 4 |
| Nearside Brake cable damaged (1.1.15 (a)) | 4 |
| Nearside Front Sub-frame insecure |2.4.G.1| | 4 |
| Offside Front Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 4 |
| Nearside All position lamps not in good working order |function impaired| |1.1.A.2a| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 4 |
| Offside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 4 |
| Nearside Front Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Offside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 4 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 4 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 4 |
| Nearside Outer Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 4 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 4 |
| Offside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 4 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 4 |
| Nearside Rear Direction indicator has a product on the light source so it is not visible from a reasonable distance |1.4.A.2e| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 4 |
| Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 4 |
| Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 4 |
| Offside Front Drivers seat with a defective structure (6.2.5 (a) (i)) | 4 |
| Offside Front Side repeater missing (4.4.1 (a) (ii)) | 4 |
| Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 4 |
| Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 4 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under bonnet (6.1.1 (c) (i)) | 4 |
| Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 4 |
| Nearside Inner Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
| Nearside Inner Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 4 |
| Offside Front Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 4 |
| Offside Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 4 |
| Nearside Front Brake disc insecure |1.1.14 |a| |ii|| | 4 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn front bush (5.3.4 (a) (i)) | 4 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 4 |
| Nearside Outer Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 4 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 4 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 4 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor area |2.4.A.3| | 4 |
| Nearside Front Lower Seat belt insecurely fixed to the seat |5.2.1a| | 4 |
| Offside Power steering ram|s| leaking from a failed joint |2.3.3b| | 4 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 4 |
| Offside Headlamp missing |1.7.3| | 4 |
| Offside Inner Front Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 4 |
| Nearside Inner Front Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 4 |
| Offside Rear All direction indicators not working |4.4.1 |a| |ii|| | 4 |
| Offside Front Lower Coil spring not correctly located |2.4.C.2| | 4 |
| Offside Front Seat belt stitching incomplete |5.2.2b| | 4 |
| Nearside Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Front Front wheel bearing feels rough when rotated |2.5.A.2| | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring |2.4.A.3| | 4 |
| Hazard warning switch faulty |1.5.4a| | 4 |
| Nearside Inner Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Offside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 4 |
| Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 4 |
| Nearside Body has a sharp edge caused by damage mirror casing |6.1.C.1| | 4 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 4 |
| Rear Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 4 |
| Offside Rear Road wheel distorted |4.2.A.1a| | 4 |
| Nearside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 4 |
| Front Steering arm has relative movement at its fixings |2.2.B.1h| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 4 |
| Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 4 |
| Offside Rear Seat belt affected by an insecure seat fixing |5.1.B.2b| | 4 |
| Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 4 |
| Offside Front Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 4 |
| Nearside Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 4 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 4 |
| Nearside Brake lining|s| less than 1.5 mm thick |3.5.1g| | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 4 |
| Offside Front Lower Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.3| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis (5.3.6 (a) (i)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis (5.3.6 (a) (i)) | 4 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts |2.4.A.3| | 4 |
| Rear Exhaust has a mounting that does not fully support the exhaust system |6.3.1b| | 4 |
| Bonnet primary retaining device insecure (3.1 (c)) | 4 |
| Nearside Inner Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 4 |
| rear brakes release unevenly |3.8.A.6| | 4 |
| Offside Outer Rear Statutory seat belt missing |5.1.1| | 4 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 4 |
| Nearside Passenger door cannot be opened from inside the vehicle |6.5.11a| | 4 |
| Rear Body has a sharp edge caused by corrosion bumper |6.1.C.1| | 4 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 4 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 4 |
| Rear Exhaust has a major leak of exhaust gases box |7.1.2| | 4 |
| Nearside Front Electrical wiring inadequately supported |1.9.2a| | 4 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 4 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor |2.4.A.3| | 4 |
| Oil leaking excessively from engine engine (8.4.1 (a) (i)) | 4 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 4 |
| Offside rear brake recording little or no effort |3.8.A.4a| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle |2.4.A.3| | 4 |
| Nearside Front Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 4 |
| Nearside Rear Upper All position lamps not working |1.1.A.3b| | 4 |
| Nearside Rear Leaf spring seriously weakened |5.3.1 |b| |i|| | 4 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 4 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded arch to floor |2.4.A.3| | 4 |
| Brake stationary pin has restricted free movement |3.5.1k| | 4 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 4 |
| Brake cable locking device missing |3.5.1l| | 4 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 4 |
| Nearside window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.9.7b| | 4 |
| Nearside Lower Body has a projection caused by corrosion |6.1.C.1| | 4 |
| Nearside Front Outline marker lamp not working |4.2.1 |a| |ii|| | 4 |
| Offside Front Outline marker lamp not working |4.2.1 |a| |ii|| | 4 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 4 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step panel |5.2.6| | 4 |
| Nearside Front Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 4 |
| Nearside Other passenger door cannot be opened from outside the vehicle side door |6.2.3 |a|| | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 4 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 4 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 4 |
| Nearside Lower Tailgate cannot be secured in the closed position |6.4.1| | 4 |
| Nearside Front Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Rear bush |5.3.4 |a| |i|| | 4 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 4 |
| Nearside Front Battery insecure |1.9.1| | 4 |
| Front Battery insecure |1.9.1| | 4 |
| Nearside Anti-roll bar insecure |2.4.G.1| | 4 |
| Windscreen wiper control is inaccessible to the driver |8.2.1a| | 4 |
| Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 4 |
| Brake actuating linkage mounting prescribed area is fractured |3.3.A.2| | 4 |
| Nearside Anti-roll bar linkage fractured |2.4.G.1| | 4 |
| Front Front wheel bearing rough when rotated both |2.5.A.2| | 4 |
| Nearside Outer Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 4 |
| Nearside Front Lower Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 4 |
| Centre Exhaust has a part missing |7.1.1a| | 4 |
| Offside Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement back bush |2.4.G.2| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 4 |
| Parking brake lever has excessive side play in the pivot and may disengage |3.1.4a| | 4 |
| Nearside Fuel tank leaking |7.2.3| | 4 |
| Offside Stop lamp obscured more than 50% |1.2.1c| | 4 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 4 |
| Offside Rear Leaf spring fractured at front eye |2.4.B.1a| | 4 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 4 |
| Nearside Rear Brake pipe inappropriately repaired |3.6.A.3| | 4 |
| Offside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 4 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 4 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 4 |
| Nearside Steering component deformed and unserviceable |2.2.C.1d| | 4 |
| Nearside Fuel pipe leaking |7.2.3| | 4 |
| Centre Brake rod locking device insecure |3.5.1l| | 4 |
| Offside Track rod end socket spring weak |2.2.B.1e| | 4 |
| Rear Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 4 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing |2.4.A.3| | 4 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 4 |
| Nearside Anti-roll bar linkage severely distorted |2.4.G.1| | 4 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 4 |
| Offside Rear Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 4 |
| Rear Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 4 |
| Offside Front Brake disc fractured |1.1.14 |a| |ii|| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount |2.4.A.3| | 4 |
| Offside Rear Exhaust has a part missing |7.1.1a| | 4 |
| Nearside Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 4 |
| Nearside Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 4 |
| Nearside Rear Body has a sharp edge caused by damage wheel arch |6.1.C.1| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill |5.3.6 |a| |i|| | 4 |
| Offside Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 4 |
| Nearside Front Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 4 |
| Fuel hose insecure |7.2.1| | 4 |
| Nearside Rear Anti-roll bar locating pin locking device missing |2.4.G.3b| | 4 |
| Offside Front Trailing arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Rear brake drum contaminated by grease |3.5.1h| | 4 |
| Nearside Front Trailing arm has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 3 |
| Nearside Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 3 |
| Nearside Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 3 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 3 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 3 |
| Offside Seat belt affected by a damaged seat frame |5.2.1b| | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front shackle |2.4.A.3| | 3 |
| Steering wheel locking device missing |2.1.6| | 3 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement at rear bush marked yellow |2.4.G.2| | 3 |
| Nearside Front Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 3 |
| Rear Electrical wiring deteriorated, likely to cause a short |1.9.2b| | 3 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 3 |
| Nearside Outer Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 3 |
| Offside Rear Leaf spring slipper insecure |2.4.B.5| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outrigger |5.2.6| | 3 |
| Speed limiter plate missing (7.10 (e)) | 3 |
| Body has a sharp edge caused by corrosion both front wings |6.1.C.1| | 3 |
| Offside Rear Leaf spring fractured spring eye |2.4.B.1a| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 3 |
| Nearside Rear Brake linkage excessively worn and seriously weakened |3.5.1e| | 3 |
| Offside Front Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 3 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step (7.1.1 (a) (i)) | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step (7.1.1 (a) (i)) | 3 |
| Offside Lower Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Nearside Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Fuel tank insecure strap corroded (6.1.3 (a) (i)) | 3 |
| Centre Front Upper Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Nearside Rear Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 3 |
| Nearside Front Seat belt buckle missing |7.1.2 |d|| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 3 |
| Nearside Upper Front position lamp|s| missing |1.1.A.3a| | 3 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 3 |
| Nearside Inner Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Rear Lower Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 3 |
| Nearside Inner Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Brake cable has a seized clevis joint pivot |3.5.1c| | 3 |
| Offside Front Anti-roll bar worn and seriously weakened |2.4.G.1| | 3 |
| Nearside Rear Headlamp not working on main beam |1.7.5a| | 3 |
| Offside Rear Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 3 |
| Nearside Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 3 |
| Nearside Rear Direction indicator incorrect colour lense broken |1.4.A.2f| | 3 |
| Offside Steering column shaft has excessive end float |2.1.3| | 3 |
| Offside Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 3 |
| Nearside Front Outer Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Rear Leaf spring anchor bracket fractured |5.3.1 |b| |i|| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill |6.2.2 |d| |i|| | 3 |
| Steering system fouling |2.2.D.2a| | 3 |
| Fuel system component leaking engine area |7.2.3| | 3 |
| Nearside Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 3 |
| Indicator switch insecure |1.4.A.1| | 3 |
| Offside Front Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Centre Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 3 |
| Nearside Front Trailing arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Front Parking brake lever is impeded in its travel |3.1.6c| | 3 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 3 |
| Nearside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Offside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 3 |
| Offside Front Upper Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i)) | 3 |
| Nearside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c)) | 3 |
| Offside Inner Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner rear bush |2.4.G.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing to floor |2.4.A.3| | 3 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded cab |5.2.6| | 3 |
| Nearside Inner Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Outer Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Lower Driver`s door hinge insecure |6.2.3 |c| |ii|| | 3 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 3 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill |6.1.B.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded close to back shackle mount |2.4.A.3| | 3 |
| Nearside Front Lower Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 3 |
| Offside Upper Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Upper Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 3 |
| Nearside Inner Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 3 |
| Offside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Driver`s door does not latch securely closed |6.2.B.1a| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 3 |
| Offside Rear Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount (5.3.6 (a) (i)) | 3 |
| Offside Rear Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 3 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 3 |
| Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount area |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount area |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 3 |
| Offside Rear Additional braking device wiring badly positioned |3.6.I.5| | 3 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 3 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 3 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached |5.3.4 |a| |ii|| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 3 |
| Offside Body has a sharp edge caused by corrosion tipper body |6.1.C.1| | 3 |
| Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 3 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 3 |
| Brake valve leaking load sensing valve (1.1.7 (d) (i)) | 3 |
| Centre Obligatory mirror missing |6.6.1a| | 3 |
| Nearside Front Shock absorber has a serious fluid leak |2.6.3| | 3 |
| Offside Front Tie bar/rod ball joint dust cover missing |2.4.G.2| | 3 |
| Nearside Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Front Lower Driver`s door hinge insecure |6.2.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting |2.4.A.3| | 3 |
| Nearside Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 3 |
| Centre Seat belt affected by an insecure seat fixing |5.2.1b| | 3 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 3 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
| Offside Front Suspension arm pin or bush excessively worn wishbone rear bush (5.3.4 (a) (i)) | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing |5.3.6 |a| |i|| | 3 |
| Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Front Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Fuel system component leaking pump area |7.2.3| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 3 |
| Offside Lower Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 3 |
| Nearside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Inner Rear Valve stem seriously damaged |4.1.D.1e| | 3 |
| Nearside Front Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 3 |
| Offside Front Power steering ram|s| leaking from a failed component |2.3.3b| | 3 |
| Rear Wheel nut|s| missing |4.2.A.1e| | 3 |
| Nearside Front Direction indicator not in good working order |not working| |1.5.1b| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in arch |2.4.A.3| | 3 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 3 |
| Offside Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Leaf spring longitudinally displaced |2.4.B.1d| | 3 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Front brake caliper has restricted free movement |3.5.1k| | 3 |
| Nearside Front Headlamp levelling device inoperative |1.7.2| | 3 |
| Nearside Front Lower Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 3 |
| front parking brake recording little or no effort |3.7.B.6a| | 3 |
| Centre Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 3 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing |5.3.6 |a| |ii|| | 3 |
| Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 3 |
| Nearside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 3 |
| Nearside Front Fuel tank insecure tank strap broken |6.1.3 |a| |i|| | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near shocker mount |2.4.A.3| | 3 |
| Brake load sensing valve linkage defective and function impaired leaking (1.1.17 (a)) | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 3 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 3 |
| Emissions not tested excessive smoke |7.4.B.1| | 3 |
| Nearside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 3 |
| Nearside Front Upper Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 3 |
| Offside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 3 |
| Offside Front Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear out rigger |2.4.A.3| | 3 |
| Offside Front Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 3 |
| Nearside Front Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 3 |
| Offside Front Upper Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 3 |
| Nearside Front Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Front Power steering malfunctioning |2.3.3a| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mounting |6.1.B.2| | 3 |
| Fuel tank insecure front tank strap broken |7.2.1| | 3 |
| Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 3 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 3 |
| Nearside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Offside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Centre Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
| Nearside Front brake caliper locking device missing |3.5.1l| | 3 |
| Offside Front Lower Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 3 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing (6.1.1 (c) (i)) | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 3 |
| Offside Outer Front Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 3 |
| Central Rear Prop shaft bearing housing fractured (6.1.7 (f) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sills |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sills |2.4.A.3| | 3 |
| Nearside Inner Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Rear Service brake effort inadequate at a wheel both |1.2.1 |a| |i|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis cross member |2.4.A.3| | 3 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement REAR |2.4.G.2| | 3 |
| Offside Rear Gas suspension unit leaking |2.4.D.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle area |2.4.A.3| | 3 |
| Offside Rear Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i)) | 3 |
| Seat belt anchorage prescribed area is excessively corroded Offside outer sill |5.2.6| | 3 |
| Offside Inner Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 3 |
| Nearside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 3 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 3 |
| Offside Inner Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step |5.3.6 |a| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step |5.3.6 |a| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch behind wheel |2.4.A.3| | 3 |
| Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b)) | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 places |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Out rigger |2.4.A.3| | 3 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 3 |
| Centre Rear An item not tested |Manual| | 3 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 3 |
| Nearside Front Lower Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 3 |
| Nearside Front Upper Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 3 |
| Offside Rear Brake pipe fouled by moving parts |3.6.B.2a| | 3 |
| Offside Front rear brake excessively fluctuating |3.7.B.3| | 3 |
| Offside Front Suspension arm has excessive play in a pin/bush rear bush on arm |2.4.G.2| | 3 |
| Nearside Service brake excessively binding (1.2.1 (f)) | 3 |
| Offside Front All outline marker lamps not working (4.2.1 (a) (ii)) | 3 |
| Nearside Front Upper Obligatory mirror missing |8.1.1| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 3 |
| Nearside Rear Outer Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion sill |6.1.C.1| | 3 |
| Offside Outer Stop lamp not working |1.2.1b| | 3 |
| Offside Front Upper Coil spring not correctly located |2.4.C.2| | 3 |
| Offside Front Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 3 |
| Nearside Outer Seat belt not functioning as intended |7.1.2 |c|| | 3 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wishbone bush |2.4.G.2| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle |6.1.A.1| | 3 |
| Offside Rear Lower Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 3 |
| Nearside Inner Rear Brake hose excessively damaged |3.6.B.4d| | 3 |
| Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 3 |
| Steering column shaft retaining device missing |2.1.6| | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 3 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 3 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 3 |
| Fuel system component leaking filter housing |7.2.3| | 3 |
| Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 3 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D BUSH |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D BUSH |2.4.G.2| | 3 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 3 |
| Offside Rear Upper Direction indicators not working |1.4.A.2c| | 3 |
| Offside Rear Upper Leaf spring fractured |2.4.B.1a| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded footstep |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar linkage inappropriately repaired |2.4.A.2| | 3 |
| Offside Towbar locking device missing |6.6.3b| | 3 |
| Offside Rear Outer Road wheel badly distorted (5.2.2 (c) (i)) | 3 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mounting |6.1.B.2| | 3 |
| Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front & rear |2.4.A.3| | 3 |
| Lower engine mounting bracket fractured and likely to fail |6.1.D.1b| | 3 |
| Offside Rear Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill at rear |2.4.A.3| | 3 |
| Nearside Leaf spring fractured (5.3.1 (b) (i)) | 3 |
| Fuel system component leaking fuel pump area |7.2.3| | 3 |
| Front Brake pipe fouled by moving parts |3.6.B.2a| | 3 |
| Nearside Front Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 3 |
| Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 3 |
| Rear Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 3 |
| Offside Side repeater incorrect colour (4.4.3 (a)) | 3 |
| Front Fuel tank insecure (6.1.3 (a) (i)) | 3 |
| Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Sub-frame inappropriately repaired |2.4.A.2| | 3 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step holed (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shock mounting |2.4.A.3| | 3 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Nearside Front Lower Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Centre Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 3 |
| Centre Drive shaft uj which forms part of the suspension has a missing flange bolt |2.4.G.4c| | 3 |
| Offside Rear Leaf spring anchor bracket fractured (5.3.1 (b) (i)) | 3 |
| Brake actuating linkage mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 3 |
| Nearside Front Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 3 |
| Nearside Front Upper Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 3 |
| Nearside Front Brake disc insecure (1.1.14 (a) (ii)) | 3 |
| Nearside Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 3 |
| Offside Anti-roll bar linkage missing |2.4.G.1| | 3 |
| Fuel tank insecure tank strap snapped (6.1.3 (a) (i)) | 3 |
| Offside Front Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 3 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D Bush (5.3.4 (a) (i)) | 3 |
| Offside Rear Anti-roll bar pin or bush excessively worn D Bush (5.3.4 (a) (i)) | 3 |
| Nearside Front Suspension arm pin or bush excessively worn back bush (5.3.4 (a) (i)) | 3 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush Both |2.4.G.2| | 3 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 3 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 3 |
| rear brake recording little or no effort offside and nearside |3.7.B.5a| | 3 |
| Drivers door hinge insecure (6.2.3 (c) (ii)) | 3 |
| Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 3 |
| Nearside Direction indicators incorrect colour |1.4.A.2f| | 3 |
| Nearside Front Body has a projection caused by damage bumper insecure |6.1.C.1| | 3 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 3 |
| Power steering component leaking Steering rack (2.1.5 (a)) | 3 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 3 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 3 |
| Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Towbar component excessively corroded (6.1.6 (a)) | 3 |
| Offside Outer Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Nearside Rear Upper Rear position lamp|s| incomplete |1.1.4a| | 3 |
| Offside Rear Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH |2.4.G.2| | 3 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 3 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 3 |
| Nearside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 3 |
| Offside Upper Tailgate cannot be secured in the closed position |6.4.1| | 3 |
| Offside Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Offside Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Offside Front Headlamp aim not tested |4.1.2 |b|| | 3 |
| Steering rack gaiter insecure |2.2.D.2d| | 3 |
| Nearside Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Brake load sensing valve linkage defective and function impaired seized |1.1.17 |a|| | 3 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 3 |
| Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 3 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 3 |
| Offside Front Track rod end ball joint dust cover missing (2.1.3 (g) (ii)) | 3 |
| Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 3 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear d bushes |2.4.G.2| | 3 |
| Nearside Obligatory mirror does not provide a view to the rear |3.3 |c|| | 3 |
| Fuel tank insecure rear strap broken |7.2.1| | 3 |
| Nearside Brake cable insecure (1.1.15 (c)) | 3 |
| Nearside Windscreen wiper blade missing |3.4 |b| |ii|| | 3 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis (1.1.21 (e) (i)) | 3 |
| Offside Front Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 3 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn Front bush |5.3.4 |a| |i|| | 3 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 3 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn D bush |5.3.4 |a| |i|| | 3 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible |5.3.1 |a| |ii|| | 3 |
| Offside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible |5.3.1 |a| |ii|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 3 |
| Offside Front Hazard warning switch faulty |1.4.B.1d| | 3 |
| Offside Rear Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount |5.3.6 |a| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 3 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mount |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mount |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 3 |
| passenger door cannot be opened from outside the vehicle bonnett |6.2.B.1c| | 3 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 3 |
| Nearside Front Lower Suspension arm worn and seriously weakened |2.4.G.1| | 3 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 3 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 3 |
| Centre Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
| Offside Rear Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 3 |
| Seat belt anchorage prescribed area is excessively corroded o/s and n/s |5.2.6| | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired door step |5.3.6 |a| |i|| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 3 |
| Offside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 3 |
| Nearside Rear fog lamp emits a light other than red lens broken |1.3.2e| | 3 |
| Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 3 |
| Steering retaining device insecure |2.2.C.1g| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outriger |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outriger |2.4.A.3| | 3 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| engine mounting bracket insecure and likely to fail |6.1.D.1b| | 3 |
| Offside Front Lower Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner sill |2.4.A.3| | 3 |
| Nearside Rear Additional braking device has inadequate clearance between other components |3.6.I.2| | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 3 |
| Offside Front Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 3 |
| Nearside Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 3 |
| Nearside Rear Shock absorber has a serious fluid leak (2.7.3) | 3 |
| Parking brake lever has no reserve travel (3.1.6b) | 3 |
| Central Rear Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 3 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 3 |
| Offside Rear Stop lamp not working (1.2.1b) | 3 |
| Brake load sensing valve seized (3.6.E.3) | 3 |
| Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 3 |
| Nearside Front wheel bearing has excessive play (2.5.A.3c) | 3 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 3 |
| Exhaust emissions exceed manufacturers specified limit limit 1.19 (8.2.2.2 (a)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear out rigger |2.4.A.3| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP |6.1.B.2| | 3 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step (6.2.2 (d) (i)) | 3 |
| Offside Front Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Leaf spring mount |2.4.A.3| | 3 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 3 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced drivers step (6.1.1 (c) (i)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet |6.1.1 |c| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet |5.3.6 |a| |i|| | 3 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 3 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 3 |
| Rear Upper All position lamps not working |1.1.A.3b| | 3 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 3 |
| Offside Front Front position lamp|s| insecure |1.1.A.3a| | 3 |
| Nearside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step holed |5.2.6| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mount |5.3.6 |a| |i|| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to chassis |6.1.B.2| | 3 |
| Power steering pipe|s| or hose|s| leaking from a joint steering rack |2.3.3b| | 3 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Nearside Rear Upper Tailgate cannot be secured in the closed position |6.4.1| | 3 |
| Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 3 |
| Brake pedal functionally incomplete |3.3.A.1a| | 3 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 3 |
| Offside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 3 |
| Centre Obligatory mirror insecure |8.1.1| | 3 |
| Offside Rear Leaf spring slipper rebound pin missing |2.4.B.5| | 3 |
| Nearside Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Front Headlamp aim beam image obviously incorrect both |1.8.A.1b| | 3 |
| Seat belt anchorage prescribed area is excessively corroded nearside step |5.2.6| | 3 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded panel |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded panel |2.4.A.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 3 |
| Offside Front Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 3 |
| Offside Front Upper Outline marker lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch (6.1.1 (c) (i)) | 3 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under wheel arch |2.4.A.3| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded cab step |5.2.6| | 3 |
| Nearside Front Outer Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 3 |
| Nearside Outline marker lamp missing (4.2.1 (a) (ii)) | 3 |
| Rear Brake pipe excessively chafed |3.6.B.2c| | 3 |
| Nearside Rear Shock absorbers insecurely attached |5.3.2 |a| |i|| | 3 |
| Nearside engine mounting bracket insecure and likely to fail |6.1.D.1b| | 3 |
| Offside Outer Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 3 |
| Offside Front Macpherson strut worn and seriously weakened |2.4.G.2| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Rear Fuel system component leaking |7.2.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded DOOR STEP |5.2.6| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 3 |
| Offside Rear coil spring cracked |2.4.C.1a| | 3 |
| Centre Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Leaf spring shackle bracket fractured (5.3.1 (b) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 3 |
| Nearside Outer Front Front constant velocity joint is insecure |2.5.C.1b| | 3 |
| Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 3 |
| Nearside Front Brake pipe inappropriately repaired |3.6.A.3| | 3 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 3 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement "D" bush |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement "D" bush |2.4.G.2| | 3 |
| Nearside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Offside Outer Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 3 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i)) | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel (6.1.1 (c) (i)) | 3 |
| Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 3 |
| Nearside Front Front passenger door hinge insecure |6.2.B.2| | 3 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow |6.1.B.2| | 3 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow |6.1.B.2| | 3 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow |6.1.B.2| | 3 |
| Nearside Rear brake disc contaminated by oil |3.5.1h| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER SIL |2.4.A.3| | 3 |
| Exhaust has a major leak of exhaust gases middle |7.1.2| | 3 |
| Nearside Rear Anti-roll bar linkage insecure (2.4.G.1) | 3 |
| Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) | 3 |
| Nearside Front Brake hose damaged and likely to fail (1.1.12 (a)) | 3 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 3 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 3 |
| Nearside Rear Side repeater flashing more than 120 times a minute |1.4.A.2g| | 3 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step |6.1.1 |c| |i|| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 3 |
| Parking brake lever inoperative (1.1.6 (d)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 3 |
| Nearside Outline marker lamp missing |4.2.1 |a|| | 3 |
| passenger door hinge insecure |6.2.B.2| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 3 |
| Nearside Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 3 |
| Offside Front Headlamp not in good working order affecting the beam image |1.2.4a| | 3 |
| Offside Rear Suspension has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 3 |
| Offside Body has a sharp edge caused by corrosion wing |6.1.C.1| | 3 |
| Nearside Front Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 3 |
| Passengers seat insecure (6.2.6 (a) (ii)) | 3 |
| Offside Front Seat belt retracting mechanism defective |5.1.B.6b| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis under wheel arch |2.4.A.3| | 3 |
| Nearside Towbar component excessively corroded |6.6.1| | 3 |
| Leaf spring splayed and action impaired |2.4.B.1c| | 3 |
| Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 3 |
| Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner body |2.4.A.3| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch |6.1.B.2| | 3 |
| Nearside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 3 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 3 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened (5.3.1 (b) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting |5.3.6 |a| |i|| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.A.1| | 3 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.A.1| | 3 |
| Direction indicator not working both rear |1.4.A.2c| | 3 |
| Front Headlamp levelling device inoperative (4.1.5 (a)) | 3 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 3 |
| Offside Front Outer Front constant velocity joint is insecure |2.5.C.1b| | 3 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded door step |2.4.A.3| | 3 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front |2.4.A.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 3 |
| Offside Front Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 3 |
| Anti-roll bar linkage insecure both rear |2.4.G.1| | 3 |
| Nearside Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 3 |
| Offside Front Body has a sharp edge caused by corrosion wheelarch |6.1.C.1| | 3 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 3 |
| Offside Inner Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Lower Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 3 |
| Brake valve insecurely mounted chassis corroded |3.6.A.2a| | 3 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle (6.1.1 (c) (i)) | 3 |
| Offside Rear Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Front Body has a sharp edge caused by corrosion inner wing |6.1.C.1| | 3 |
| Nearside Rear All position lamps not in good working order |function impaired| |1.1.A.2a| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill and step |5.2.6| | 3 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (4.1.3 (b)) | 3 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis shock mount |2.4.A.3| | 3 |
| Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 3 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Fuel system component leaking filter area |7.2.3| | 3 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 3 |
| Rear position lamp|s| does not face the rear |1.1.A.3a| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 3 |
| Offside Front Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 3 |
| Nearside Rear Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 3 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Steering column top mounting bracket insecure |2.1.2d| | 3 |
| Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i)) | 3 |
| Offside Leaf spring fractured |5.3.1 |b| |i|| | 3 |
| Power steering pipe/hose leaking at rack |2.1.5 |a|| | 3 |
| Offside Track rod end has had excessive heat applied |2.2.C.1e| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under step |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill end |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x2 |2.4.A.3| | 3 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch |6.1.1 |c| |i|| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch |6.1.1 |c| |i|| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 3 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing area |2.4.A.3| | 3 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 3 |
| Offside Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 3 |
| Front Brake disc significantly and obviously worn n/s and o/s (1.1.14 (a) (i)) | 3 |
| Front Power steering inoperative |2.3.3a| | 3 |
| Nearside Tailgate cannot be secured in the closed position |6.4.1| | 3 |
| Nearside Outer Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Central Front Parking brake lever has no reserve travel |3.1.6b| | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger |6.1.1 |c| |i|| | 3 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i)) | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 3 |
| Offside Rear Body has a sharp edge caused by damage light lens |6.1.C.1| | 3 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 3 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 3 |
| Nearside Front Body has a projection caused by corrosion wing |6.1.C.1| | 3 |
| Nearside Front Anti-lock braking system component excessively damaged |3.4.2| | 3 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 3 |
| Nearside Front Passenger`s seat insecure |6.2.6 |a| |ii|| | 3 |
| Rear Passenger door cannot be opened from inside the vehicle |6.5.11a| | 3 |
| Exhaust system not adequately supported tail pipe |7.1.1| | 3 |
| Nearside Outer Rear Road wheel distorted |4.2.A.1a| | 3 |
| Nearside Outer Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock area |2.4.A.3| | 3 |
| Nearside Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Nearside Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mounting |2.4.A.3| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member |6.1.A.1| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting |2.4.A.3| | 3 |
| Offside Front Valve stem seriously misaligned |4.1.D.1e| | 3 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 3 |
| Nearside Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting |2.4.A.3| | 3 |
| Offside Front Driver`s seat security significantly reduced |6.5.14| | 3 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Nearside Front Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 3 |
| Nearside Front Body has a sharp edge caused by corrosion arch |6.1.C.1| | 3 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 3 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 3 |
| front brakes release unevenly nearside slow |3.7.B.4| | 3 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 3 |
| Nearside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Central Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 3 |
| Offside Rear Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 3 |
| Statutory seat belt of the wrong type. |5.1.1| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded panel |2.4.A.3| | 3 |
| Offside Inner Front Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 3 |
| Offside Seat belt damaged (7.1.2 (b) (i)) | 3 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 3 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 3 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 3 |
| Offside Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
| Nearside Front Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Fuel cap/sealing device sealing washer missing |7.2.4c| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded step area |2.4.A.3| | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top |2.4.A.3| | 3 |
| Front Drag link end ball joint has excessive play |2.2.B.1f| | 3 |
| Offside Outer Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch |6.2.2 |d| |i|| | 3 |
| Offside Front Upper coil spring broken |2.4.C.1a| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 3 |
| Offside Front Lower Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 3 |
| Nearside Inner Front Drag link end ball joint has excessive play |2.2.B.1f| | 3 |
| Nearside Front Track rod end ball joint has excessive play (2.2.B.1f) | 3 |
| Nearside Rear Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 3 |
| Nearside Rear Passenger door cannot be opened from outside the vehicle |6.5.11a| | 3 |
| Offside Inner Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Leaf spring inappropriately repaired |2.4.A.2| | 3 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 3 |
| Nearside Front Electrical wiring damaged and bare wires exposed |1.9.2c| | 3 |
| Outer All position lamps not working |1.1.A.3b| | 3 |
| Nearside Front Brake performance not tested |3.7.A.1| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x3 |2.4.A.3| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 3 |
| Nearside Rear Lower Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Lower Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and inner sill |5.2.6| | 3 |
| Nearside Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d| | 3 |
| Offside Rear Lower Anti-roll bar worn and seriously weakened |2.4.G.1| | 3 |
| Exhaust emissions exceed default limit of 1.5m-1 |8.2.2.2 |b|| | 3 |
| Offside Brake lining|s| less than 1.5 mm thick |3.5.1g| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 3 |
| Nearside Front Front suspension locking device ineffective |2.5.A.4| | 3 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened |5.3.1 |b| |i|| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 3 |
| Nearside Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 3 |
| Nearside Inner Front Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Offside Rear Leaf spring shackle pin excessively loose in its bracket |2.4.B.3a| | 3 |
| Offside Front suspension locking device missing |2.5.A.4| | 3 |
| Fuel tank insecure strap snapped |7.2.1| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step (5.3.6 (a) (i)) | 3 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i)) | 3 |
| Nearside Outer Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Offside Front Sub-frame attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 3 |
| Steering system excessively rough (2.1.1 (a)) | 3 |
| Front Suspension arm has excessive play in a ball joint both |2.4.G.2| | 3 |
| Nearside Front Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 3 |
| Rear Fuel tank insecure strap broken |7.2.1| | 3 |
| Offside Rear passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring |6.1.B.2| | 3 |
| Front Power steering component|s| leaking from a failed joint |2.3.3b| | 3 |
| Centre Rear Brake pipe leaking |3.6.A.1| | 3 |
| Nearside Rear Leaf spring anchor pin excessively loose in its bracket |2.4.B.3a| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step and inner sill |5.2.6| | 3 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 3 |
| Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 3 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Inner Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded engine mounting |2.4.A.3| | 3 |
| Offside Front Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 3 |
| Rear Brake valve leaking load sensing valve |1.1.7 |d| |i|| | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 3 |
| Offside Front Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 3 |
| Offside Rear coil spring fractured |2.4.C.1a| | 3 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 3 |
| Nearside Rear Upper Leaf spring fractured |2.4.B.1a| | 3 |
| Steering box has a significant oil leak |2.2.D.2e| | 3 |
| Nearside Front Front drive shaft coupling is excessively worn |2.5.C.1c| | 3 |
| Centre Front Brake pedal pad not secure to the pedal |3.3.A.1c| | 3 |
| Nearside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 3 |
| Offside Headlamps matched pair are not the same colour |1.7.6| | 3 |
| Bonnet retaining device excessively deteriorated unable to open |8.4.2| | 3 |
| Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 3 |
| Offside Steering rack deformed and unserviceable |2.2.C.1d| | 3 |
| Nearside Front Anti-roll bar pin or bush excessively worn D rubber (5.3.4 (a) (i)) | 3 |
| Offside Front Driver`s door hinge insecure |6.2.B.2| | 3 |
| Brake servo inoperative (1.1.10 (a) (ii)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 3 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 3 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 3 |
| Offside Front Lower Suspension arm pin or bush excessively worn arm rear bush (5.3.4 (a) (i)) | 3 |
| Nearside Outer Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| Nearside Rear Leaf spring linkage pin not correctly positioned |2.4.B.3a| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear |2.4.A.3| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 3 |
| Nearside Front Body has a projection caused by corrosion inner wing |6.1.C.1| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded step at |5.2.6| | 3 |
| Offside Rear window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.9.7b| | 3 |
| Rear Fuel pipe leaking |7.2.3| | 3 |
| Offside Front Brake pipe inappropriately repaired |3.6.A.3| | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outrigger |6.1.B.2| | 3 |
| Centre Parking brake mechanism/associated mounting prescribed area is severely distorted |3.1.9| | 3 |
| Rear Entrance/exit door emergency control inoperative |6.2.C.2| | 3 |
| Driver`s view to front impaired by damage |6.9.1b| | 3 |
| Nearside Front Upper coil spring broken |2.4.C.1a| | 3 |
| Front Fuel tank insecure strap broken |7.2.1| | 3 |
| Offside Front Brake performance not tested |3.7.A.1| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 3 |
| Nearside Front Anti-roll bar cracked |2.4.G.1| | 3 |
| All outline marker lamps with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 3 |
| Centre Rear Spare wheel carrier insecure |6.4.2| | 3 |
| Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 3 |
| Nearside Outer Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 3 |
| Nearside Brake pipe excessively chafed |3.6.B.2c| | 3 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger |6.1.A.1| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 3 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both |2.4.G.2| | 3 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 3 |
| Nearside Rear Anti-roll bar insecurely attached |5.3.3 |a| |i|| | 3 |
| Power steering component|s| leaking steering rack area |2.3.3b| | 3 |
| Nearside Rear Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 3 |
| Brake rod excessively corroded and seriously weakened |3.5.1e| | 3 |
| Offside Main beam `tell-tale` not working |1.7.4c| | 3 |
| Centre Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Outer Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
| Steering rack gaiter split both |2.2.D.2d| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section, marked yellow |2.4.A.3| | 3 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 3 |
| Fuel cap/sealing device component leaking (6.1.3 (b) (i)) | 3 |
| Nearside Rear Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3| | 3 |
| Nearside Front Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 3 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger (5.3.6 (a) (i)) | 3 |
| Suspension component mounting prescribed area is excessively corroded offside rear inner sill |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 3 |
| Offside Rear Leaf spring saddle is fractured |2.4.B.7a| | 3 |
| Rear Service brake excessively fluctuating both (1.2.1 (e)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most |2.4.A.3| | 3 |
| Nearside Rear Leaf spring linkage pin missing |2.4.B.3a| | 3 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x member |2.4.A.3| | 3 |
| Offside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 3 |
| Nearside Front Outer Body has a sharp edge caused by corrosion wing |6.1.C.1| | 3 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 3 |
| Nearside Rear Leaf spring anchor bracket inappropriately repaired |2.4.A.2| | 3 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 3 |
| Nearside Upper Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
| Nearside Rear Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 3 |
| Offside Rear Rear reflector insecure |1.5.1a| | 3 |
| Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting (5.3.6 (a) (i)) | 3 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 3 |
| Offside Seat belt retracting mechanism defective |5.1.B.6b| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 3 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Rear Emissions not tested |7.0| | 3 |
| Centre Front Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing |5.3.6 |a| |i|| | 3 |
| Offside Rear Lower Tie bar/rod insecure |2.4.G.1| | 3 |
| Centre Front passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under wing |2.4.A.3| | 3 |
| Centre Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.1 |c| |ii|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle area |2.4.A.3| | 3 |
| Nearside Rear Body has a sharp edge caused by damage lamp lens |6.1.C.1| | 3 |
| Centre Horn not working |1.6.2a| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheelarch to floor |2.4.A.3| | 3 |
| Fuel tank insecure fuel tank strap broken |7.2.1| | 3 |
| Brake load sensing valve defective and function impaired siezed |3.6.E.3| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 3 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 3 |
| Nearside Inner Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 3 |
| Rear fog lamp switch inoperative (4.5.3 (a)) | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear of leaf spring |2.4.A.3| | 3 |
| Rear Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 3 |
| Offside Front Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 3 |
| Prop shaft bearing housing likely to fail x2 (6.1.7 (f) (ii)) | 3 |
| Nearside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 3 |
| Offside Front Shock absorber has a serious fluid leak |2.6.3| | 3 |
| Nearside Front Outer Seat belt retracting mechanism defective |5.2.5b| | 3 |
| Offside Rear Brake cable damaged |1.1.15 |a|| | 3 |
| Suspension component mounting prescribed area is fractured |2.4.A.3| | 3 |
| Exhaust has part of the system excessively deteriorated |6.3.1a| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting |5.3.6 |a| |i|| | 3 |
| Front Windscreen wiper control missing |8.2.1a| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded foot step |5.2.6| | 3 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 3 |
| Offside Outline marker lamp not working |4.2.1 |a| |ii|| | 3 |
| Brake performance not tested due to leak |1.2.1 |g|| | 3 |
| Offside Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 3 |
| Offside Rear Lower Drag link end ball joint has excessive play |2.2.B.1f| | 3 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 3 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 3 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by spring hanger |2.4.A.3| | 3 |
| Rear Direction indicator incorrect colour both |1.4.A.2f| | 3 |
| Nearside Front Indicator tell tale inoperative |1.4.A.2a| | 3 |
| Offside Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Brake servo damaged and function impaired |3.6.A.2c| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor |5.3.6 |a| |i|| | 3 |
| Nearside Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 3 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis |6.1.B.2| | 3 |
| Nearside Rear Anti-roll bar linkage insecure nut loose |2.4.G.1| | 3 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 3 |
| Nearside Front Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/floor |2.4.A.3| | 3 |
| Brake rod insecure |3.5.1d| | 3 |
| Nearside Rear All outline marker lamps not working (4.2.1 (a) (ii)) | 3 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 3 |
| Offside Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring hanger |6.1.B.2| | 3 |
| Centre Rear Exhaust has a part missing |7.1.1a| | 3 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 3 |
| Rear Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Anti-roll bar worn and seriously weakened |2.4.G.1| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wing |6.1.B.2| | 3 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering x member |6.1.A.1| | 3 |
| Offside Front Position lamp missing (4.2.1 (a) (ii)) | 3 |
| Offside Outer Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 3 |
| Supplementary Restraint System warning lamp indicates a fault air bag light on |5.4.2| | 3 |
| Nearside Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 3 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.3| | 3 |
| Offside Front Macpherson strut worn and seriously weakened |2.4.G.1| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 3 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.5.1e| | 3 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 3 |
| Nearside Rear Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 3 |
| Nearside Rear Rear reflector insecure |1.5.1a| | 3 |
| Offside Rear Coil spring not correctly located |2.4.C.2| | 3 |
| Nearside Outer Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 3 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back panel |2.4.A.3| | 3 |
| Nearside Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 3 |
| Power steering pipe|s| or hose|s| excessively corroded and leaking |2.3.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 3 |
| Nearside Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 3 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 3 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Offside Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 3 |
| Offside Inner Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet |6.1.1 |c| |i|| | 3 |
| Nearside Rear Stop lamp obscured more than 50% |1.2.1c| | 3 |
| Offside Front Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 3 |
| Nearside Rear Leaf spring eye defective |anchor| spring eye broken |2.4.B.1b| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting |2.4.A.3| | 3 |
| Nearside Rear Direction indicator incorrect colour |1.5.1d| | 3 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 3 |
| Offside Rear Leaf spring anchor pin or bush likely to become detached (5.3.4 (a) (ii)) | 3 |
| Nearside Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Leaf spring anchor bracket insecure (5.3.1 (a) (i)) | 3 |
| Offside Front Suspension arm ball joint excessively worn bottom ball joint |5.3.4 |a| |i|| | 3 |
| Centre Front Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 3 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 3 |
| Front Power steering pump leaking from a failed seal |2.3.3b| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor / inner flitch |2.4.A.3| | 3 |
| Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Driver`s door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 3 |
| Offside Inner Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 3 |
| Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 3 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S OUTER SILL |6.1.B.2| | 3 |
| Fuel tank insecure Strap broken (6.1.3 (a) (i)) | 3 |
| Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 |5.3.6 |a| |i|| | 3 |
| Nearside Front Obligatory mirror does not provide a view to the rear |3.3 |c|| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Nearside Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of cab |6.1.B.2| | 3 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 3 |
| Rear Stop lamp insecure |1.2.1a| | 3 |
| Offside Rear Ball joint has excessive play |2.2.B.1f| | 3 |
| Nearside Front Brake disc fractured |1.1.14 |a| |ii|| | 3 |
| Bonded suspension unit attachment loose |2.4.F.1a| | 3 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Offside Inner Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 3 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 3 |
| Rear Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 3 |
| Offside Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 3 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Nearside Rear passenger seat cannot be secured in the upright position. |6.2.3| | 3 |
| brake drum in such a condition that it is seriously weakened |3.5.1i| | 3 |
| Offside Rear Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 3 |
| Nearside Front drive shaft coupling is insecure |2.5.C.1c| | 3 |
| Nearside Power steering component|s| leaking |2.3.3b| | 3 |
| Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 3 |
| Front Brake pipe excessively chafed |3.6.B.2c| | 3 |
| Nearside Rear Service brake indicates brake judder |3.7.D.1| | 3 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 3 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember |3.1.9| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to floor |2.4.A.3| | 3 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner arch |3.6.C.3| | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 3 |
| Centre Exhaust has a major leak of exhaust gases box |7.1.2| | 3 |
| Power steering fluid reservoir empty |2.1.5 |b| |ii|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 3 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 3 |
| Body has a sharp edge caused by corrosion offside front wing |6.1.C.1| | 3 |
| Steering column locking device insecure |2.1.6| | 3 |
| Front Brake load sensing valve linkage seized |3.6.E.3| | 3 |
| Nearside Rear wheel cylinder securing device missing |3.5.1j| | 3 |
| Offside Front engine mounting bracket damaged and likely to fail |6.1.D.1b| | 3 |
| Offside Rear Leaf spring eye defective |anchor| broken |2.4.B.1b| | 3 |
| Nearside Front Body has a sharp edge caused by damage door mirror |6.1.C.1| | 3 |
| Offside Front Body has a sharp edge caused by damage door mirror |6.1.C.1| | 3 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 3 |
| Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 3 |
| Offside Front Inner Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 3 |
| Offside Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 3 |
| Rear Suspension spring mounting prescribed area is excessively corroded x member |2.4.A.3| | 3 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay (6.1.1 (c) (i)) | 3 |
| Offside Suspension component mounting prescribed area is excessively corroded Under Inner Sill |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut top mounting |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded engine mount area |2.4.A.3| | 3 |
| Nearside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded end of sill |2.4.A.3| | 3 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded suspension turret |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 3 |
| Nearside Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 3 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 3 |
| Centre Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Outer Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
| Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 3 |
| Offside Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 3 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Offside Rear Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 3 |
| Nearside Body has a sharp edge caused by damage mirror head |6.1.C.1| | 3 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 3 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP (6.1.1 (c) (i)) | 3 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 3 |
| Nearside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 3 |
| Offside Front Outer Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Brake valve leaking load sensing valve |3.6.A.1| | 3 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting |5.2.6| | 3 |
| Offside Front Brake hose damaged and likely to fail (1.1.12 (a)) | 3 |
| Nearside Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 3 |
| Inner Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 3 |
| Rear Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Front Front drive shaft coupling is insecure |2.5.C.1c| | 3 |
| Rear Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 3 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 3 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 3 |
| Offside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 3 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step |5.3.6 |a| |i|| | 3 |
| Nearside Front Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded in arch |2.4.A.3| | 3 |
| Offside Front Service brake grabbing severely |1.2.1 |c|| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 3 |
| Front Anti-roll bar has excessive play in a pin/bush both |2.4.G.2| | 3 |
| Hazard warning lamps not flashing in phase, with ignition on |1.5.4b| | 3 |
| Hazard warning lamps not flashing in phase, with ignition off |1.5.4b| | 3 |
| Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Corner |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 3 |
| Brake actuating linkage mounting prescribed area is inadequately repaired |3.3.A.2| | 3 |
| Front Prop shaft joint excessively worn (6.1.7 (c) (i)) | 3 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under bonnet |2.4.A.3| | 3 |
| Fuel pipe leaking |6.1.3 |b| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear |2.4.A.3| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers step |6.1.B.2| | 3 |
| Front All outline marker lamps not working (4.2.1 (a) (ii)) | 3 |
| Offside Seat belt retracting mechanism defective (7.1.2 (e)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 3 |
| Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 3 |
| Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 3 |
| Central Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch |6.1.B.2| | 3 |
| Centre Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 3 |
| Suspension component mounting prescribed area is excessively corroded nearside rear inner sill |2.4.A.3| | 3 |
| Nearside Rear Brake cable inappropriately repaired |3.5.1n| | 3 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear most sill |2.4.A.3| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded rear most sill |2.4.A.3| | 3 |
| Nearside Rear Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 3 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker |2.4.A.3| | 3 |
| Rear Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 3 |
| Nearside Rear Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 3 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 3 |
| Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 3 |
| Offside Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 3 |
| Centre Front Obligatory mirror missing |8.1.1| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount |5.3.6 |a| |i|| | 3 |
| Central Front Seat belt retracting mechanism defective (7.1.2 (e)) | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill to step |5.2.6| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill to step |5.2.6| | 3 |
| Rear Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 3 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 3 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 3 |
| Centre Passenger door cannot be opened from inside the vehicle |6.5.11a| | 3 |
| Nearside Inner Rear Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Nearside Rear Brake pedal does not operate a brake fitted to each wheel |3.3.A.3| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 3 |
| Nearside Front Windscreen in an unacceptable condition |3.2 |c| |i|| | 3 |
| Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 3 |
| Rear Exhaust system not adequately supported tail pipe |7.1.1| | 3 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area (6.2.2 (d) (i)) | 3 |
| Rear Emergency exit window cannot be opened from inside the vehicle |6.2.D.1a| | 3 |
| Brake load sensing valve linkage seized |3.6.F.4| | 3 |
| Front Brake pipe kinked |3.6.B.2b| | 3 |
| Nearside Rear Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear passenger seat cannot be secured in the upright position. |6.2.3| | 3 |
| Offside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity |4.2.3 |b| |ii|| | 3 |
| Nearside Rear Lower Torsion bar excessive play at an end fixing |2.4.E.2| | 3 |
| Front Track rod end ball pin shank loose |2.2.B.1c| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring mounting |2.4.A.3| | 3 |
| Nearside Other passenger door cannot be opened from outside the vehicle side door (6.2.3 (a)) | 3 |
| Centre Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front mount |2.4.A.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step sill |5.2.6| | 3 |
| Offside Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 3 |
| Front Seat belt stitching badly frayed |5.2.2b| | 3 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp with indicator |1.1.A.3f| | 3 |
| Offside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 3 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 3 |
| Nearside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 3 |
| Nearside Front Macpherson strut worn and seriously weakened |2.4.G.2| | 3 |
| Nearside Rear Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 3 |
| Offside Rear Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 3 |
| Nearside Front Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 3 |
| Prop shaft bearing excessively worn middle (6.1.7 (b) (i)) | 3 |
| Nearside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 3 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 3 |
| Offside coil spring incomplete |2.4.C.1a| | 3 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear most |5.3.4 |a| |i|| | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 3 |
| Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near spring mount |6.1.B.2| | 3 |
| Offside Body has a sharp edge caused by corrosion body |6.1.C.1| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis crossmember |2.4.A.3| | 3 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills corroded through |6.1.B.2| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 3 |
| Side repeater missing |1.4.A.2b| | 3 |
| Nearside Outer Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 3 |
| Offside Front Upper Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 3 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended |4.10 |c| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis below servo |2.4.A.3| | 3 |
| Offside Front Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step holed |5.2.6| | 3 |
| Nearside Brake pipe leaking front to rear |3.6.A.1| | 3 |
| Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Obligatory mirror missing glass |3.3 |a|| | 3 |
| Offside Front Driver`s door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 3 |
| Offside Suspension component mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 3 |
| Prop shaft bearing excessively worn 2nd bearing (6.1.7 (b) (i)) | 3 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 3 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 3 |
| Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Body has a projection caused by corrosion bumper insecure |6.1.C.1| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 3 |
| Rear Rear fog lamp missing |1.3.2a| | 3 |
| Headlamp aim beam image kick up to the offside |1.6.B1| | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 3 |
| Nearside Rear Leaf spring fractured front eye (5.3.1 (b) (i)) | 3 |
| Vehicle Identification Number has more than one different number displayed |6.3.5.b| | 3 |
| Nearside Steering locking device insecure |2.2.C.1g| | 3 |
| Nearside Front Anti-roll bar linkage cracked |2.4.G.1| | 3 |
| Rear Rear position lamp|s| missing |1.1.A.3a| | 3 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 3 |
| Offside Floor excessively deteriorated |6.2.4 |a| |i|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting |2.4.A.3| | 3 |
| Fuel system component leaking fuel filter |7.2.3| | 3 |
| Nearside Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Offside Rear Lower Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger (6.2.2 (d) (i)) | 3 |
| Nearside Rear Tie bar/rod locating pin locking device not properly locked |2.4.G.3b| | 3 |
| Offside Rear Leaf spring anchor pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 3 |
| Nearside Front Anti-roll bar locating pin insecure |2.4.G.3a| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting |2.4.A.3| | 3 |
| Exhaust has a major leak of exhaust gases middle section |7.1.2| | 3 |
| Prop shaft bearing excessively worn rear most (6.1.7 (b) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill back |2.4.A.3| | 3 |
| Fuel system component leaking fuel filter area |7.2.3| | 3 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 3 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 3 |
| Offside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 3 |
| Position lamp not working both front (4.2.1 (a) (ii)) | 3 |
| Position lamp not working both rear (4.2.1 (a) (ii)) | 3 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and inner sill |6.1.B.2| | 3 |
| Spare wheel carrier insecure |6.1.5 |a|| | 3 |
| Offside Front Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 3 |
| Steering wheel locking device insecure |2.1.6| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 3 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 3 |
| Headlamp switch missing |1.7.1| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 3 |
| Offside Front Braking system leaking caliper |3.6.A.1| | 3 |
| Nearside Rear Lower Shock absorber has an excessively worn linkage |2.7.4| | 3 |
| Nearside Front Body has a sharp edge caused by corrosion outer wheel arch |6.1.C.1| | 3 |
| Rear Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 3 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid crossmember (5.3.6 (a) (i)) | 3 |
| Centre Rear Braking system leaking |3.6.A.1| | 3 |
| Brake valve leaking |1.1.7 |d| |i|| | 3 |
| Exhaust particulate filter missing where one was fitted as standard |7.1.3| | 3 |
| Nearside Front All outline marker lamps not working (4.2.1 (a) (ii)) | 3 |
| Offside Steering rack gaiter missing |2.2.D.2d| | 3 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |1.1.6f| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 3 |
| Nearside Front Upper Brake pipe leaking |3.6.A.1| | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill to Step |5.2.6| | 3 |
| Nearside Cab steps so insecure it is likely to cause injury (6.2.8 (a) (ii)) | 3 |
| Nearside Front Brake pipe connection leaking on an air braking system (1.1.11 (b) (i)) | 3 |
| Offside Outer Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 3 |
| Front Body insecure and dangerous to other road users bumper insecure |6.1.B.1b| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing panel |2.4.A.3| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 3 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in arch |6.1.B.2| | 3 |
| Nearside passenger door cannot be opened from outside the vehicle sliding |6.2.B.1c| | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outer sill |6.1.B.2| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded at step |5.2.6| | 3 |
| Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 3 |
| Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Fuel tank insecure tank strap corroded |7.2.1| | 3 |
| Front Prop shaft securing bolt missing (6.1.7 (a) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring |2.4.A.3| | 3 |
| Offside Rear Body component likely to become detached wheel arch (6.2.1 (a) (ii)) | 3 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch (6.2.2 (d) (i)) | 3 |
| Nearside Inner Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded bump stop |2.4.A.3| | 3 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| rack end |2.2.A.1b| | 3 |
| Offside Inner Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/floor |2.4.A.3| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 3 |
| Central Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 3 |
| Seat belt retracting mechanism defective |5.1.B.6b| | 3 |
| Offside Front Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 3 |
| Nearside Front Headlamp not working on dipped beam |1.2.4a| | 3 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Central Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 3 |
| Nearside Inner Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area (5.3.6 (a) (i)) | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step and inner sill |5.2.6| | 3 |
| Offside Rear Other passenger door hinge insecure (6.2.3 (c) (ii)) | 3 |
| Nearside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Offside Rear Brake hose leaking |3.6.A.1| | 3 |
| Fuel tank insecure front tank strap corroded |7.2.1| | 3 |
| Seat belt anchorage prescribed area is excessively corroded both doorstep under sills |5.2.6| | 3 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Rear rear parking |secondary| brake grabbing severely |3.7.B.6b| | 3 |
| Emissions not tested excessive smoke (8.2.2.2 (e)) | 3 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill |6.2.2 |d| |i|| | 3 |
| brake disc in such a condition that it is seriously weakened front |3.5.1i| | 3 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount |5.3.6 |a| |i|| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 3 |
| Front brake disc excessively scored |3.5.1g| | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger |5.3.6 |a| |i|| | 3 |
| Nearside Front Lower Shock absorber insecure |2.7.2b| | 3 |
| Brake linkage locking device insecure |3.5.1l| | 3 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 3 |
| Headlamp aim beam image too far to the left |1.6.B4| | 3 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount |5.3.6 |a| |i|| | 3 |
| Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 3 |
| Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Central Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded foot step |5.2.6| | 3 |
| Nearside Inner Rear Statutory seat belt missing |5.1.1| | 3 |
| Nearside Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 3 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 3 |
| Offside Front Upper Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 3 |
| Offside Front Track rod end socket spring weak |2.2.B.1e| | 3 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 3 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner step |2.4.A.3| | 3 |
| Prop shaft bearing excessively worn both |6.1.7 |b| |i|| | 3 |
| Nearside Fuel system component insecure |7.2.1| | 3 |
| Front Brake cable has restricted free movement |3.5.1k| | 3 |
| Offside Rear Lower Rear position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Front position lamp|s| not working side light |1.1.A.3b| | 3 |
| Nearside Front Seat belt stitching not secure |5.2.2b| | 3 |
| Front Brake cable locking device insecure |3.5.1l| | 3 |
| Offside Front Front suspension retaining device ineffective |2.5.A.4| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 3 |
| Offside Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 3 |
| Exhaust emissions exceed manufacturers specified limit 0.88 (8.2.2.2 (a)) | 3 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 3 |
| Offside Rear Braking system leaking |1.1.3 |d|| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 3 |
| Offside Front Brake hose stretched |3.6.B.4c| | 3 |
| Offside Front Driver`s door catch insecure |6.2.B.2| | 3 |
| Nearside Rear Braking system leaking brake drum |3.6.A.1| | 3 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.1 |c| |ii|| | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 3 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 3 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 3 |
| Nearside Front Macpherson strut corroded and seriously weakened |5.3.3 |b| |i|| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 3 |
| Rear Towbar retaining device insecure |6.6.3a| | 3 |
| Nearside Rear reflector insecure |1.5.1a| | 3 |
| Nearside Rear Leaf spring shackle pin not correctly positioned |2.4.B.3a| | 3 |
| Offside Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i)) | 3 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded innerwing |2.4.A.3| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 3 |
| Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sills |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 3 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 3 |
| Offside Inner Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 3 |
| Central Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 3 |
| Nearside Front Front position lamp(s) not working (1.1.A.3b) | 3 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 3 |
| Offside Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 3 |
| Nearside Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 3 |
| Front Service brake excessively binding |1.2.1 |f|| | 3 |
| Nearside Front Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 3 |
| Offside Windscreen wiper not working |3.4 |a|| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle |6.1.B.2| | 3 |
| Offside Rear Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Coil spring not correctly located |2.4.C.2| | 3 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top (5.3.6 (a) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush d bush |2.4.G.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis as marked |2.4.A.3| | 3 |
| Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Front Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 3 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 3 |
| Offside Front Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i)) | 3 |
| Front Windscreen in an unacceptable condition (3.2 (c) (i)) | 3 |
| Front Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 3 |
| Exhaust emissions exceed manufacturers specified limit 1.22 (8.2.2.2 (a)) | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 3 |
| Offside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Rear Seat belt missing (7.1.2 (a)) | 3 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by load valve |3.3.A.2| | 3 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 3 |
| Front Exhaust has a major leak of exhaust gases box |7.1.2| | 3 |
| Nearside Rear Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 3 |
| Front Steering system excessively rough |2.2.D.1| | 3 |
| Front Track rod end ball joint has excessive play both |2.1.3 |b| |i|| | 3 |
| Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Direction indicator incomplete |1.5.1b| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner door step |2.4.A.3| | 3 |
| Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 3 |
| Emissions not tested |8.2.1.2 |d|| | 3 |
| Rear Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill holed |2.4.A.3| | 3 |
| Offside Rear position lamp|s| not in good working order |function impaired| |1.1.4a| | 3 |
| Offside Front Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 3 |
| Exhaust has a major leak of exhaust gases silencer |7.1.2| | 3 |
| Rear All outline marker lamps not working |4.2.1 |a|| | 3 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 3 |
| Nearside Front Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front brake disc contaminated by brake fluid |3.5.1h| | 3 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 3 |
| Nearside Rear Upper Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Nearside Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 3 |
| Offside Rear Obligatory mirror missing |8.1.1| | 3 |
| Offside Headlamp aim not tested |1.6| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step (6.2.2 (d) (i)) | 3 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step (6.2.2 (d) (i)) | 3 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i|| | 3 |
| Offside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| front brakes release unevenly offside slow |3.7.B.4| | 3 |
| Front Power steering component leaking (2.1.5 (a)) | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch holed |6.1.B.2| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch holed |6.1.B.2| | 3 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2| | 3 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/outrigger |2.4.A.3| | 3 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount |5.3.6 |a| |i|| | 3 |
| Nearside Rear Seat belt flexible stalk cable has broken strands |5.2.4b| | 3 |
| Rear Outline marker lamp missing (4.2.1 (a) (ii)) | 3 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values .75 (8.2.2.2 (f)) | 3 |
| Front Driver`s view to front impaired by damage |6.9.1b| | 3 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 3 |
| Offside Suspension spring mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 3 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill (5.3.6 (a) (i)) | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 3 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 3 |
| Central Brake pedal anti-slip provision incomplete |3.3.A.1b| | 3 |
| Nearside Front Body has a sharp edge caused by corrosion step |6.1.C.1| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 3 |
| Offside Outer Rear Anti-roll bar linkage insecure |2.4.G.1| | 3 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 3 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt wishbone |2.4.G.2| | 3 |
| Rear Service brake imbalanced across an axle |1.2.1 |b| |i|| | 3 |
| Passenger`s seat insecure |6.2.6 |a| |ii|| | 3 |
| Upper All position lamps not working |1.1.A.3b| | 3 |
| Nearside Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 3 |
| Central Front Statutory seat belt missing |5.1.1| | 3 |
| Central Rear Statutory seat belt missing |5.1.1| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under seat |5.2.6| | 3 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 3 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 3 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 3 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Floor |2.4.A.3| | 3 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner arch various |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 3 |
| Offside Front Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 3 |
| Centre Front Bonnet retaining device ineffective |8.4.2| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 3 |
| Nearside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Offside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Prop shaft bearing excessively worn 2nd (6.1.7 (b) (i)) | 3 |
| Offside Rear reflector not in good working order |function impaired| |1.4.2b| | 3 |
| Nearside Inner Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i)) | 3 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 3 |
| Seat belt cut causing the fibres to separate |5.1.B.3a| | 3 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 3 |
| Nearside Front Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed |2.4.A.3| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 3 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.3| | 3 |
| Nearside Rear All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mount |5.3.6 |a| |i|| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mount |5.3.6 |a| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear outrigger |5.3.6 |a| |i|| | 3 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring |2.4.A.3| | 3 |
| Nearside Rear Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) | 3 |
| Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 3 |
| Nearside Front Lower Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 3 |
| Nearside Brake actuating linkage mounting prescribed area is fractured |3.3.A.2| | 3 |
| Nearside Rear Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 3 |
| Passenger door cannot be opened from inside the vehicle |6.5.11a| | 3 |
| Rear Passenger door does not latch securely closed |6.5.11b| | 3 |
| Entrance/exit door ???door open` warning device inoperative |6.2.C.3| | 3 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2) | 3 |
| Offside Front Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 3 |
| Offside Front Bonded suspension unit bonding failed and part of the unit is likely to become displaced |2.4.F.2| | 3 |
| Nearside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded various |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded various |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting (5.3.6 (a) (i)) | 3 |
| Offside Front Subframe mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 3 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rearward |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rearward |2.4.A.3| | 3 |
| Inner Headlamp not working on main beam |1.7.5a| | 3 |
| Nearside Rear Wheel stud|s| loose |4.2.A.1e| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 3 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 1.19 (8.2.2.2 (f)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber |5.3.6 |a| |i|| | 3 |
| Nearside Front Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded behind rear spring |2.4.A.3| | 3 |
| Central Seat belt locking mechanism does not secure or release |5.2.5a| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 3 |
| Sub-frame severely distorted |2.4.G.1| | 3 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 3 |
| Offside Inner Front Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Leaf spring fractured front eye |2.4.B.1a| | 3 |
| Rear passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner corner |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting |2.4.A.3| | 3 |
| Nearside Steering rack fractured and unserviceable |2.2.C.1d| | 3 |
| Offside Front Anti-lock braking system component excessively damaged |3.4.2| | 3 |
| Front Prop shaft bearing housing insecure |6.1.7 |f| |i|| | 3 |
| Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 3 |
| Fuel system component leaking around injectors |7.2.3| | 3 |
| Nearside Body has a sharp edge caused by damage side loading door handle |6.1.C.1| | 3 |
| Central Front Seat belt not functioning as intended |7.1.2 |c|| | 3 |
| Front Track rod end ball joint has excessive play both (2.1.3 (b) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 3 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 3 |
| Offside Front Wheel hub spigot mounting excessively worn |4.2.B.5| | 3 |
| Offside Front Steering component mounting prescribed area is excessively corroded (2.1.2 (e) (i)) | 3 |
| Front Driver`s view restricted by object |6.9.1a| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 3 |
| Offside Power steering ram|s| leaking from a failed seal |2.3.3b| | 3 |
| Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 3 |
| Centre Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 3 |
| Offside Position lamp not working |4.2.1 |a| |ii|| | 3 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 3 |
| Front Brake pipe inadequately clipped to rear |3.6.B.1| | 3 |
| Central Rear Brake pipe inadequately supported |3.6.B.1| | 3 |
| Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Front Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 3 |
| Nearside Front Upper Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 3 |
| Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 3 |
| Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill end |2.4.A.3| | 3 |
| Centre Statutory seat belt missing stalk |5.1.1| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 3 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring (5.3.6 (a) (i)) | 3 |
| Offside Rear Wheel stud|s| loose |4.2.A.1e| | 3 |
| Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 3 |
| Nearside Front Headlamp not in good working order affecting the beam image |1.2.4a| | 3 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 3 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 3 |
| Leaf spring fractured |2.4.B.1a| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 |6.1.B.2| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 3 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 3 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 3 |
| Nearside Road wheel bead rim badly distorted |4.2.A.1a| | 3 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 3 |
| Offside Side repeater missing |4.4.1 |a| |ii|| | 3 |
| Nearside Rear Stop lamp missing |1.2.1a| | 3 |
| Nearside Rear Brake pipe excessively damaged (1.1.11 (c)) | 3 |
| Steering column retaining device missing |2.1.6| | 3 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 3 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 3 |
| Offside Front brake disc locking device insecure |3.5.1l| | 3 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 3 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 3 |
| Leaf spring anchor bracket loose |2.4.B.6a| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear spring hanger (5.3.6 (a) (i)) | 3 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 3 |
| Rear Anti-roll bar pin or bush excessively worn both |5.3.4 |a| |i|| | 3 |
| Nearside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 3 |
| Nearside Rear Anti-roll bar missing |2.4.G.1| | 3 |
| Nearside Steering column shaft has excessive end float |2.1.3| | 3 |
| Rear front parking brake recording little or no effort |3.7.B.6a| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6| | 3 |
| Nearside Front Direction indicators not in good working order |function impaired| |1.5.A1b| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch in several places |2.4.A.3| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 3 |
| Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 3 |
| Nearside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 3 |
| Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 3 |
| Offside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 3 |
| Nearside Upper Tailgate cannot be secured in the closed position |6.4.1| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 3 |
| Nearside Headlamp are incorrectly positioned |4.1.4 |a|| | 3 |
| Nearside Front Seat belt retracting mechanism defective |5.1.B.6b| | 3 |
| Nearside Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 3 |
| Nearside Rear Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
| Nearside Front Suspension arm has excessive play in a pin/bush Rear bush |2.4.G.2| | 3 |
| Offside Front Suspension arm has excessive play in a pin/bush Rear bush |2.4.G.2| | 3 |
| Offside Coil spring not correctly located |2.4.C.2| | 3 |
| Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 3 |
| Towbar mounting obviously of an inappropriate size |6.6.2| | 3 |
| Towbar mounting obviously of an inappropriate type |6.6.2| | 3 |
| Towbar fixing obviously of an inappropriate type |6.6.2| | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger |6.1.1 |c| |ii|| | 3 |
| Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 3 |
| Headlamp not working on dipped beam both (4.1.1 (a) (ii)) | 3 |
| Brake servo insecurely mounted |3.6.A.2a| | 3 |
| Nearside Rear All outline marker lamps not working |4.2.1 |a|| | 3 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 3 |
| Electrical wiring deteriorated, likely to cause a short |1.9.2b| | 3 |
| Brake hydraulic reservoir fluid not visible (1.1.10 (d) (iii)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 3 |
| Brake linkage excessively corroded and seriously weakened |3.5.1e| | 3 |
| Nearside Windscreen in an unacceptable condition (3.2 (c) (i)) | 3 |
| Offside Front Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 3 |
| Offside Front Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 3 |
| Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded swinging shackle |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded swinging shackle |2.4.A.3| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 3 |
| Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 3 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre inner sill |5.2.6| | 3 |
| Offside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 3 |
| Nearside Front Lower Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Rear Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 3 |
| Offside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 3 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement arm rear bush |2.4.G.2| | 3 |
| Nearside Front Mechanical brake component securing device loose |3.5.1i| | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner step |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 3 |
| Front Steering rack damaged and unserviceable |2.2.C.1d| | 3 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner arch (5.3.6 (a) (i)) | 3 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in engine bay (6.1.1 (c) (i)) | 3 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock |2.4.A.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep underneath |5.2.6| | 3 |
| Nearside Inner Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Seat belt buckle not functioning as intended |7.1.2 |d|| | 3 |
| Nearside Outer Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 3 |
| Offside Inner Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of |2.4.A.3| | 3 |
| Offside Front Body has a projection caused by corrosion inner wing |6.1.C.1| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.A.1| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 3 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Nearside Rear Suspension component missing bump stop |5.3.3 |a| |ii|| | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 3 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hanger area |2.4.A.3| | 3 |
| Rear Shock absorber has a serious fluid leak BOTH |2.7.3| | 3 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor |2.4.A.3| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 3 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D-bush |2.4.G.2| | 3 |
| Rear Anti-roll bar linkage insecurely attached both |5.3.3 |a| |i|| | 3 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 3 |
| Nearside Rear Lower Rear position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 3 |
| Offside Rear Anti-roll bar fractured |2.4.G.1| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area |5.3.6 |a| |i|| | 3 |
| Nearside Rear Brake cable guide defective and affecting operation (1.1.15 (d)) | 3 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 3 |
| Nearside Rear Upper passenger door does not latch securely closed |6.2.B.1a| | 3 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 3 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear sill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Offside Rear Emergency exit sign missing |6.2.D.3| | 3 |
| Offside Front Position lamp not working side light (4.2.1 (a) (ii)) | 3 |
| Nearside Rear Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 3 |
| Nearside Rear Shock absorbers has an excessively worn bush lower bush (5.3.2 (c)) | 3 |
| Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 3 |
| Nearside Rear Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 3 |
| Offside Front Front drive shaft coupling is excessively worn |2.5.C.1c| | 3 |
| Towbar excessively corroded within 30cm of towbar mounting rear cross member |6.1.6 |i| |i|| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Offside Obligatory mirror does not provide a view to the rear |3.3 |c|| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 3 |
| Nearside Front Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 3 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill x1 |5.2.6| | 3 |
| Nearside Rear Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 3 |
| Offside Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 3 |
| Nearside Rear Leaf spring anchor bracket fractured |5.3.1 |b| |i|| | 3 |
| Offside Front Lower Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 3 |
| Nearside Windscreen wiper missing |3.4 |a|| | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 3 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp indicator |1.1.A.3f| | 3 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Offside Front Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 3 |
| Nearside Inner Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop area |6.1.B.2| | 3 |
| Suspension component mounting prescribed area is excessively corroded both rear outer sills |2.4.A.3| | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 3 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor/step |6.1.B.2| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 3 |
| Suspension component mounting prescribed area is excessively corroded both rear under sill panels |2.4.A.3| | 3 |
| Nearside Direction indicator missing |1.4.A.2b| | 3 |
| Centre Rear Exhaust mounting missing |7.1.1b| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 3 |
| Obligatory mirror does not provide a view to the rear |8.1.2b| | 3 |
| Offside Front Track rod end excessively corroded and unserviceable |2.2.C.1d| | 3 |
| Electrical wiring insecure under bonnet |1.9.2a| | 3 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 3 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded cill |2.4.A.3| | 3 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded cill |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis |2.4.A.3| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer chassis |2.4.A.3| | 3 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step (7.1.1 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger area (5.3.6 (a) (i)) | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked (6.1.1 (c) (i)) | 3 |
| Offside Front Anti-roll bar cracked |2.4.G.1| | 3 |
| Offside Front Suspension arm pin or bush excessively worn wishbone rear bush |5.3.4 |a| |i|| | 3 |
| Offside Leaf spring fractured (5.3.1 (b) (i)) | 3 |
| Offside Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
| Offside Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 3 |
| Nearside Front Body component corroded and likely to cause injury wing |6.2.1 |a| |i|| | 3 |
| Offside Front Battery insecure |1.9.1| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer seal |2.4.A.3| | 3 |
| Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Offside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded rear wheel arch |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 3 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Rear Towbar locking device missing |6.6.3b| | 3 |
| Offside Front Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 3 |
| passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 3 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 3 |
| Centre Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
| Nearside Front Lower Bonded suspension unit attachment loose |2.4.F.1a| | 3 |
| Nearside Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 3 |
| Offside brake drum contaminated by brake fluid |3.5.1h| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mounting |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i)) | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 3 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 3 |
| Offside Front Seat belt buckle damaged (7.1.2 (d)) | 3 |
| Offside Rear Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Nearside All position lamps not working side marker |1.1.A.3b| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward mount |2.4.A.3| | 3 |
| Nearside Front Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Offside Track rod end ball joint dust cover missing |2.2.C.1c| | 3 |
| Centre Rear Body has a projection caused by damage |6.1.C.1| | 3 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp both |1.1.A.3f| | 3 |
| Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Floor |2.4.A.3| | 3 |
| Offside Front Lower Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 3 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 3 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel |6.1.B.2| | 3 |
| Nearside Front Suspension arm pin or bush excessively worn Wishbone rear bush |5.3.4 |a| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch |2.4.A.3| | 3 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 3 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innerwing |2.4.A.3| | 3 |
| Nearside Outer Front Statutory seat belt missing |5.1.1| | 3 |
| Offside Front Driver`s seat moving inadvertently |6.2.5 |b| |ii|| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor |2.4.A.3| | 3 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc inner |2.5.C.1a| | 3 |
| Nearside Rear Leaf spring to axle fixing bolt insecure |5.3.1 |a| |i|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear |2.4.A.3| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger |6.2.2 |d| |i|| | 3 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 3 |
| Nearside Front Macpherson strut inappropriately repaired |2.4.A.2| | 3 |
| Nearside Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 3 |
| Exhaust has a major leak of exhaust gases middle box |7.1.2| | 3 |
| Offside Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 3 |
| Nearside Front Inner Front constant velocity joint is insecure |2.5.C.1b| | 3 |
| Offside Front Steering system excessively tight |2.2.D.1| | 3 |
| Nearside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 3 |
| Horn is a gong |1.6.2c| | 3 |
| Nearside Rear Body has a sharp edge caused by damage lens |6.1.C.1| | 3 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 3 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing area |2.4.A.3| | 3 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 3 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassi |2.4.A.3| | 3 |
| Towbar locking device damaged |6.6.3b| | 3 |
| Nearside Glazing/screen/partition insecure and likely to fall out |6.9.2| | 3 |
| Rear Stop lamp adversely affected by the operation of another lamp both |1.2.1f| | 3 |
| Offside Front Lower Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 3 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring hanger |6.1.B.2| | 3 |
| Offside Windscreen washer control missing |8.2.1a| | 3 |
| Offside Front Lower Suspension arm ball joint dust cover missing |2.4.G.2| | 3 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing |5.3.6 |a| |ii|| | 3 |
| Nearside Front Outer Seat belt stitching badly frayed |5.2.2b| | 3 |
| Brake hose leaking |3.6.A.1| | 3 |
| Fuel tank leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 3 |
| Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Nearside Inner Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 3 |
| Offside Seat belt affected by a cracked seat frame |5.2.1b| | 3 |
| Nearside Rear Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 3 |
| Rear position lamp|s| missing |1.1.A.3a| | 3 |
| Offside Rear Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Offside Electrical wiring insecure |1.9.2a| | 3 |
| Front Electrical wiring inadequately supported |1.9.2a| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger area |2.4.A.3| | 3 |
| Nearside Stop lamp|s| remains on when the brakes are released |4.3.2 |a| |iii|| | 3 |
| Offside Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger (6.2.2 (d) (i)) | 3 |
| Offside Outer Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 3 |
| Nearside Outline marker lamp not working central (4.2.1 (a) (ii)) | 3 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 3 |
| Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Rear Rear position lamp|s| not working both |1.1.A.3b| | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 3 |
| Front Exhaust has part of the system excessively deteriorated |6.3.1a| | 3 |
| Offside Rear Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 3 |
| Nearside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 3 |
| Suspension spring mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of spring |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of spring |2.4.A.3| | 3 |
| Nearside Outer Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mounting |2.4.A.3| | 3 |
| Offside Rear Lower Front position lamp|s| not working |1.1.A.3b| | 3 |
| Front Position lamp not working both sides |4.2.1 |a|| | 3 |
| Nearside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Offside Front Obligatory mirror seriously damaged affecting the rear view |6.6.1b| | 3 |
| Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
| Offside Rear Leaf spring saddle is fractured (5.3.1 (b) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 3 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 3 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 3 |
| Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 3 |
| Front Lower Fuel system component leaking |7.2.3| | 3 |
| Centre Front Horn not loud enough to be heard by another road user |1.6.2b| | 3 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r chassis |2.4.A.3| | 3 |
| Offside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 3 |
| Nearside Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 3 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded Wing |2.4.A.3| | 3 |
| Offside Front Side repeater flashing more than 120 times a minute |1.4.A.2g| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Under Inner Sill |2.4.A.3| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner Wing |2.4.A.3| | 3 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 3 |
| Offside Rear Direction indicator not working (1.4.A.2c) | 3 |
| Nearside rear brake recording little or no effort (3.7.B.5a) | 3 |
| Offside Rear Shock absorber has a serious fluid leak (2.7.3) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 3 |
| Front Upper Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Front Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 3 |
| Nearside Other passenger door cannot be opened from outside the vehicle sliding door (6.2.3 (a)) | 3 |
| Nearside Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii)) | 3 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 3 |
| Offside Front Seat belt insecurely fixed to the seat |5.1.B.2a| | 3 |
| Nearside Steering arm damaged and unserviceable |2.2.C.1d| | 3 |
| Lower Steering column locking device insecure |2.1.6| | 3 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 3 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 3 |
| Rear Rear position lamp|s| incomplete |1.1.4a| | 3 |
| Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
| Drive shaft which forms part of the suspension distorted |2.4.G.4a| | 3 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 3 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 3 |
| Nearside Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Offside Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
| Brake valve leaking load sensing |3.6.A.1| | 3 |
| Offside Front Service brake grabbing severely |3.7.C.2| | 3 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 3 |
| Fuel pipe union leaking |6.1.3 |b| |i|| | 3 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 3 |
| Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 3 |
| Nearside Rear Outline marker lamp likely to become detached |4.2.1 |c| |ii|| | 3 |
| Fuel tank insecure strap (6.1.3 (a) (i)) | 3 |
| Nearside Rear Coil spring not correctly located |2.4.C.2| | 3 |
| Nearside Rear Valve stem seriously damaged |5.2.3 |j|| | 3 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 3 |
| Nearside Lower Anti-roll bar linkage insecure |2.4.G.1| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 3 |
| Nearside Front Anti-roll bar ball joint dust cover missing |2.4.G.2| | 3 |
| Offside Inner Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Central Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 3 |
| Offside Rear Lower Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch and floor |2.4.A.3| | 3 |
| Shock absorber has a serious fluid leak both rears |2.7.3| | 3 |
| Nearside Front Valve stem seriously damaged (5.2.3 (j)) | 3 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 3 |
| Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Offside Front Lower Seat belt insecurely fixed to the seat |5.2.1a| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area |6.1.1 |c| |i|| | 3 |
| Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting |5.3.6 |a| |i|| | 3 |
| Offside Rear position lamp|s| incorrect colour lens broken |1.1.A.3e| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 3 |
| brake disc insecure |3.5.1i| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 3 |
| Nearside Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 3 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 3 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 3 |
| Central Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 3 |
| Offside Rear Lower Shock absorbers has an excessively worn bush |5.3.2 |c|| | 3 |
| Offside Inner Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 3 |
| Nearside Front Macpherson strut severely distorted |2.4.G.1| | 3 |
| Rear Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 3 |
| Rear Passengers seat insecure (6.2.6 (a) (ii)) | 3 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring |2.4.A.3| | 3 |
| Nearside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 3 |
| Nearside Front Stop lamp|s| not working |4.3.1 |a| |ii|| | 3 |
| Nearside Rear Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 3 |
| Brake master cylinder leaking |1.1.10 |b| |ii|| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 3 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount |2.4.A.3| | 3 |
| Brake pedal feels spongy with the vacuum fully depleted |3.3.C.2| | 3 |
| Offside Front Wheel stud|s| loose |4.2.A.1e| | 3 |
| Offside Rear Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 3 |
| Offside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area (6.1.1 (c) (i)) | 3 |
| Nearside Front Track rod end damaged and unserviceable |2.2.C.1d| | 3 |
| Stop lamp not working o/s and n/s |1.2.1b| | 3 |
| Offside Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 3 |
| Parking brake mechanism/associated mounting prescribed area is deliberately modified which significantly reduces the original strength |3.1.9| | 3 |
| Offside Rear fog lamp insecure |1.3.2a| | 3 |
| Offside Stop lamp insecure |1.2.1a| | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 3 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 3 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 3 |
| Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 3 |
| Offside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 3 |
| Nearside Inner Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 3 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center outer sill |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded cab step |5.2.6| | 2 |
| Nearside Other passenger door cannot be opened from outside the vehicle sliding door |6.2.3 |a|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 2 |
| Nearside Front Horn not working |7.7 |a| |ii|| | 2 |
| Nearside Front All direction indicators incorrect colour (4.4.3 (a)) | 2 |
| Exhaust emissions exceed manufacturer`s specified limit plate value 1.19 |8.2.2.2 |a|| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 2 |
| Offside Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 2 |
| Front Position lamp not working both |4.2.1 |a|| | 2 |
| Rear Position lamp not working both |4.2.1 |a|| | 2 |
| Exhaust has a major leak of exhaust gases back box |7.1.2| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded back of door step area |5.2.6| | 2 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch corroded |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner 1/4 sill |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 2 |
| Rear Exhaust system not adequately supported mount |7.1.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded offside rear sill |2.4.A.3| | 2 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 2 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 2 |
| Rear Seat belt missing (7.1.2 (a)) | 2 |
| Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 2 |
| Nearside Front Upper Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis
|2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle |5.3.6 |a| |i|| | 2 |
| Offside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 2 |
| Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area |5.3.6 |a| |i|| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill x1 |5.2.6| | 2 |
| Offside Rear Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill and floor |5.2.6| | 2 |
| Offside Rear Leaf spring fractured front spring eye |2.4.B.1a| | 2 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Towbar locking device inadequate |6.6.3b| | 2 |
| Centre Rear Lower Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Power steering pipe/hose leaking pipes to rack |2.1.5 |a|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shock mount |2.4.A.3| | 2 |
| Inner Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Nearside Body has a sharp edge caused by corrosion innersill |6.1.C.1| | 2 |
| Bonnet primary retaining device excessively deteriorated bonnet wont open (3.1 (c)) | 2 |
| Front Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 2 |
| Centre Rear All position lamps not working |1.1.A.3b| | 2 |
| Offside Front Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 2 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sill |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor |6.1.B.2| | 2 |
| Offside Front Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill |5.3.6 |a| |i|| | 2 |
| Suspension component mounting prescribed area is excessively corroded both rear inner wheel arches |2.4.A.3| | 2 |
| Nearside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 2 |
| Front Position lamp not working x two (4.2.1 (a) (ii)) | 2 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 2 |
| Offside Rear Body has a sharp edge caused by damage light |6.1.C.1| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded panel |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail / inner flitch |2.4.A.3| | 2 |
| Offside Front Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 2 |
| Rear position lamp|s| adversely affected by the operation of another lamp rear lights interacting |1.1.A.3f| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s/r outter sill holed |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner wheel arch holed |2.4.A.3| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 2 |
| Nearside Front Lower Fuel tank insecure |7.2.1| | 2 |
| Offside Front brake caliper securing device excessively deteriorated |3.5.1j| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill as marked |6.1.B.2| | 2 |
| Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 2 |
| Offside Front Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4 panel |5.3.6 |a| |i|| | 2 |
| Centre Brake cable inappropriately repaired |3.5.1n| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 areas (5.3.6 (a) (i)) | 2 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre (6.2.2 (d) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward mounting |2.4.A.3| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step (7.1.1 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount front (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring |5.3.6 |a| |i|| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 2 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 2 |
| Central Rear Brake load sensing valve seized |3.6.E.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected X MEMBER (5.3.6 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected X MEMBER (5.3.6 (a) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill holed |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under Wheel Arch |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under Wheel Arch |6.1.B.2| | 2 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step holed |6.1.B.2| | 2 |
| Offside Lower Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked (6.1.1 (c) (i)) | 2 |
| Offside Rear Leaf spring modified and seriously weakened |2.4.A.2| | 2 |
| Offside Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 2 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both arches |6.1.1 |c| |i|| | 2 |
| Nearside Front brake caliper locking device insecure |3.5.1l| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to sill |2.4.A.3| | 2 |
| Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s/f shock tower area |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting |5.3.6 |a| |i|| | 2 |
| Offside Front Mechanical brake component securing device loose |3.5.1i| | 2 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of rear |2.4.A.3| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer seal |2.4.A.3| | 2 |
| Nearside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear wheel arch |2.4.A.3| | 2 |
| Offside Front Headlamp lens seriously defective |4.1.1 |b| |ii|| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing. |2.4.A.3| | 2 |
| Centre Seat belt attachment fitting fractured |5.2.3| | 2 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 2 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 2 |
| Brake cable damaged broken (1.1.15 (a)) | 2 |
| Offside Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Nearside Rear Leaf spring to axle securing bolt insecure u bolts loose |2.4.B.7b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point |5.3.6 |a| |i|| | 2 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded flitch |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 2 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan shocker |2.4.A.3| | 2 |
| Front Body has a sharp edge caused by corrosion both sides wings |6.1.C.1| | 2 |
| Nearside Front Sub-frame attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Front Front drive shaft coupling bearing fastener insecure |2.5.C.2b| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill behind wheel |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by fuel tank |6.1.B.2| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Wing |2.4.A.3| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 2 |
| Brake valve leaking load sensing |1.1.7 |d| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearward |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearward |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 2 |
| Suspension spring mounting prescribed area is excessively corroded offside rear outrigger |2.4.A.3| | 2 |
| Power steering component|s| leaking at rack |2.3.3b| | 2 |
| Offside Front Inner Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
| Offside Front Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 2 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Rear Axle has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 2 |
| Seat belt anchorage prescribed area is excessively corroded both front inner sills |5.2.6| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/door shut |2.4.A.3| | 2 |
| Rear Service brake excessively binding n/s and o/s (1.2.1 (f)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded innerwing |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle |6.1.B.2| | 2 |
| Outer Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near spring hanger (6.1.1 (c) (ii)) | 2 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outrigger (6.1.1 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both out riggers |2.4.A.3| | 2 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Corner as marked |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Corner as marked |2.4.A.3| | 2 |
| Nearside Seat belt stitching incomplete |5.2.2b| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i)) | 2 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sills |6.1.A.1| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 2 |
| Rear Shock absorbers has a serious fluid leak (5.3.2 (b)) | 2 |
| Brake hydraulic reservoir fluid level decreases after several pedal applications |3.3.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i|| | 2 |
| Nearside Front Road wheel badly distorted (5.2.2 (c) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear panel (5.3.6 (a) (i)) | 2 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 2 |
| Nearside Front Lower Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Lower Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 2 |
| Offside Front Body has a projection caused by corrosion inner wheel arch |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wheel arch |2.4.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded foot step |5.2.6| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded foot step |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area |5.3.6 |a| |i|| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch |3.6.C.3| | 2 |
| Front front brake binding both |3.7.B.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring eye |2.4.A.3| | 2 |
| Nearside Front Body insecure and dangerous to other road users bumper loose |6.1.B.1b| | 2 |
| Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 2 |
| Nearside Rear Rear position lamp|s| not working sidelight |1.1.A.3b| | 2 |
| Offside Rear Rear position lamp|s| not working sidelight |1.1.A.3b| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 2 |
| Nearside Rear Suspension has inadequate clearance with the bump stop missing |2.4.A.1a| | 2 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear inner and outer sills. (5.3.6 (a) (i)) | 2 |
| Rear Leaf spring eye defective |shackle| |2.4.B.1b| | 2 |
| Reversing lamp inoperative |4.6.1 |a|| | 2 |
| Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 2 |
| Nearside Inner Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sills |6.1.B.2| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner and outer |6.1.1 |c| |i|| | 2 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides |6.1.B.2| | 2 |
| Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Front Anti-roll bar locating pin incorrectly positioned |2.4.G.3a| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassi under bonnet |2.4.A.3| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering over axle |6.1.A.1| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILLS |6.1.B.2| | 2 |
| Offside Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring hanger |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill front of spring |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 2 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 2 |
| Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
| Rear Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drivers step (7.1.1 (a) (i)) | 2 |
| Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i)) | 2 |
| Centre Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring mount (5.3.6 (a) (i)) | 2 |
| Offside Rear Seat belt missing (7.1.2 (a)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Floor |2.4.A.3| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring mount |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter |2.4.A.3| | 2 |
| Nearside Outer Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Seat belt attachment fitting badly deteriorated |5.2.3| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |6.1.B.2| | 2 |
| Nearside Outer Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill |7.1.1 |a| |i|| | 2 |
| Nearside Front Body panel insecure wing (6.2.1 (a) (i)) | 2 |
| Nearside Fuel pipe insecure |7.2.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 2 |
| Offside Body has a sharp edge caused by damage Mirror |6.1.C.1| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and floor |2.4.A.3| | 2 |
| Offside Service brake lagging in operation |1.2.1 |d|| | 2 |
| Nearside Outer Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 2 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber |2.4.A.3| | 2 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded which significantly reduces the original strength |3.1.7| | 2 |
| Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 2 |
| Nearside Front Lower Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 2 |
| Offside Front Seat belt stitching badly frayed drivers |5.2.2b| | 2 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded lower inner wing |2.4.A.3| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill |6.1.B.2| | 2 |
| Front Fuel tank insecure strap corroded |7.2.1| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil |5.3.6 |a| |i|| | 2 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 2 |
| Nearside Front Body has a sharp edge caused by corrosion outer arch |6.1.C.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 2 |
| Offside Rear Seat belt buckle missing |7.1.2 |d|| | 2 |
| Offside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 2 |
| Nearside Rear Upper Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 2 |
| Rear Suspension spring mounting prescribed area is excessively corroded nearside and offside cross member |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 2 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear wishbone bush |2.4.G.2| | 2 |
| Nearside passenger door cannot be opened from outside the vehicle centre |6.2.B.1c| | 2 |
| Headlamp not working on main beam both sides (4.1.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 2 |
| Nearside Service brake lagging in operation (1.2.1 (d)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch bottom |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to inner arch |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill area |5.2.6| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 2 |
| Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Central Rear Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 2 |
| Nearside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring hanger |2.4.A.3| | 2 |
| Nearside Fuel hose leaking |7.2.3| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL ARCH |6.1.B.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step |7.1.1 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step |7.1.1 |a| |i|| | 2 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Nearside Windscreen wiper not working |3.4 |a|| | 2 |
| Offside Front Ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Offside Rear Upper Suspension component mounting prescribed area is fractured |2.4.A.3| | 2 |
| Nearside Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. side door |6.1.E.1| | 2 |
| Offside Rear Side repeater flashing more than 120 times a minute |1.4.A.2g| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Step |2.4.A.3| | 2 |
| Nearside Front Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) | 2 |
| Brake pedal anti-slip provision worn smooth (3.3.A.1b) | 2 |
| Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b) | 2 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 2 |
| Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 2 |
| Nearside Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Offside Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 2 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 2 |
| Offside Front Lower Driver`s seat insecure |6.2.A.1| | 2 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 2 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill |6.2.2 |d| |i|| | 2 |
| Rear All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded bump stop |2.4.A.3| | 2 |
| Offside Front Headlamp aim beam image too far to the left |1.6.B4| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 2 |
| Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Prop shaft bearing housing fractured |6.1.7 |f| |i|| | 2 |
| Rear Rear fog lamp not in good working order |not working| |1.1.6b| | 2 |
| Nearside Obligatory mirror insecure |6.6.1a| | 2 |
| Offside Outer Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wing (6.2.2 (d) (i)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch (6.2.2 (d) (i)) | 2 |
| Exhaust has a major leak of exhaust gases Centre |7.1.2| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 2 |
| Nearside Front Lower Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 2 |
| Nearside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Offside Front Brake prescribed area is excessively corroded |1.1.21 |e| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting area |2.4.A.3| | 2 |
| Front Exhaust has a major leak of exhaust gases flexi |7.1.2| | 2 |
| Offside Valve stem seriously damaged |4.1.D.1e| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around spring hanger |6.1.B.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Track rod end ball joint has excessive play nearside |2.2.B.1f| | 2 |
| Nearside Body has a sharp edge caused by damage sill |6.1.C.1| | 2 |
| Side repeater flashing more than 120 times a minute |1.4.A.2g| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 2 |
| Offside Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 2 |
| Nearside Outer Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 2 |
| Offside Outer Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 2 |
| Offside Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 2 |
| Headlamp not working on dipped beam both |4.1.1 |a| |ii|| | 2 |
| Rear reflector missing both |4.8.2 |a| |ii|| | 2 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 2 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 2 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 2 |
| Offside Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 2 |
| Offside Inner Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step |6.1.1 |c| |i|| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step |6.2.2 |d| |i|| | 2 |
| Nearside Lower Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Outer Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step inner sill |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6| | 2 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 2 |
| Offside Position lamp adversely affected by the operation of another lamp brake light is on (4.2.3 (c)) | 2 |
| Nearside Rear Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch and floor |2.4.A.3| | 2 |
| Nearside Front Seat belt flexible stalk cable has broken strands |5.2.4b| | 2 |
| Offside Front Lower Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 2 |
| Offside Body has a sharp edge caused by corrosion Sill |6.1.C.1| | 2 |
| Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 2 |
| Exhaust emits dense blue smoke at idle |7.3.A.2b| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Front Position lamp not working both fronts (4.2.1 (a) (ii)) | 2 |
| Front Body has excessive displacement which may lead to loss of vehicle control bumper |6.1.B.1a| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 2 |
| Centre Front Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Nearside Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Offside Outer Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Power steering component|s| leaking pump area |2.3.3b| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring |5.3.6 |a| |i|| | 2 |
| Nearside Front Inner Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor area |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor area |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor area |2.4.A.3| | 2 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount inner sill |2.4.A.3| | 2 |
| Front Windscreen damaged and affecting the driver`s view of an obligatory external mirror |3.2 |a| |ii|| | 2 |
| Offside Outer Front Ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Rear Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 2 |
| Offside Rear Anti-roll bar linkage which is adjustable, locking device missing |2.4.G.1| | 2 |
| Nearside Rear Rear position lamp|s| incorrect colour lens broken |1.1.A.3e| | 2 |
| Offside Front Track rod end damaged and unserviceable |2.2.C.1d| | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 2 |
| Offside Windscreen in an unacceptable condition (3.2 (c) (i)) | 2 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 2 |
| Nearside Front Upper Coil spring not correctly located |2.4.C.2| | 2 |
| Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in front of rear wheel |2.4.A.3| | 2 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 2 |
| Inner Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear spring |2.4.A.3| | 2 |
| Nearside Subframe mounting prescribed area is excessively corroded chassis along side of fuel tank |2.4.A.3| | 2 |
| Headlamp not working on dipped beam both sides |1.7.5a| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Nearside Front Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Offside Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front mount |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount |2.4.A.3| | 2 |
| Offside Front Anti-lock braking system component excessively damaged (1.6 (e)) | 2 |
| Offside Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii)) | 2 |
| Tailgate cannot be secured in the closed position (6.2.1 (e)) | 2 |
| Nearside Rear Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 2 |
| Fuel tank insecure rear tank strap excessively corroded |7.2.1| | 2 |
| Offside Front Exhaust system not adequately supported |7.1.1| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring anchor |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring anchor |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward mount |2.4.A.3| | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill x1 |5.2.6| | 2 |
| Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing....... (5.3.6 (a) (i)) | 2 |
| Offside Front Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step (6.1.1 (c) (i)) | 2 |
| Front Passenger door cannot be opened from outside the vehicle |6.5.11a| | 2 |
| Rear Passenger door cannot be opened from outside the vehicle |6.5.11a| | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sills |5.2.6| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i)) | 2 |
| Nearside Front Outer Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 2 |
| Nearside Front Outer Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Central Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 2 |
| Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring hanger |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i)) | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 2 |
| Centre Lower Statutory seat belt missing |5.1.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis rail |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 2 |
| Rear Prop shaft bearing excessively worn centre bearing (6.1.7 (b) (i)) | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement lower arm rear bush |2.4.G.2| | 2 |
| Offside Outline marker lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 2 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.3.2f| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch |5.3.6 |a| |ii|| | 2 |
| Nearside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 2 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger |5.3.6 |a| |i|| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion Wheel Arch |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer wheel arch |5.3.6 |a| |i|| | 2 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Nearside Rear Inner Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 2 |
| Nearside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area is severely distorted inner sill |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced foot step (7.1.1 (a) (i)) | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
| Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Rear fog lamp switch missing |1.3.1a| | 2 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Anti-lock braking system warning lamp is missing. |3.4.1a| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 2 |
| Nearside Front Drag link end ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner sills (5.3.6 (a) (i)) | 2 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 2 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg |3.3.A.2| | 2 |
| Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Rear Stop lamp not working BOTH |1.2.1b| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch/floor |2.4.A.3| | 2 |
| Seat belt anchorage prescribed area is excessively corroded offside floor |5.2.6| | 2 |
| Offside Axle has inadequate clearance with the bump stop |2.4.A.1a| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Offside Front Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Nearside Front Suspension arm ball joint excessively worn bottom ball joint (5.3.4 (a) (i)) | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Hydraulic fluid leaking continuously posing a serious risk to road safety (8.4.1 (a) (ii)) | 2 |
| Nearside Front Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 2 |
| Offside Headlamp incorrect colour |4.1.4 |a|| | 2 |
| Nearside Driver`s view of an obligatory external mirror materially affected by an obstruction |3.1 |a| |ii|| | 2 |
| Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 2 |
| Nearside Rear Direction indicator incorrect colour white |4.4.3 |a|| | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside, outer sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Macpherson strut worn and seriously weakened |2.4.G.1| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded step |2.4.A.3| | 2 |
| Rear Service brake grabbing severely |1.2.1 |c|| | 2 |
| Service brake lagging in operation |1.2.1 |d|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab |7.1.1 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x3 |2.4.A.3| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step/sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Body component corroded and likely to cause injury step |6.2.1 |a| |i|| | 2 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both side (6.1.1 (c) (i)) | 2 |
| Offside Front Lower Brake pipe leaking |3.6.A.1| | 2 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 2 |
| Nearside Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring mounting |2.4.A.3| | 2 |
| Offside Rear Axle has inadequate clearance with the chassis |2.4.A.1a| | 2 |
| Offside Front Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 2 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 2 |
| Offside Front Shock absorber detached |2.7.2b| | 2 |
| Offside Front Brake pipe leaking and excessively corroded |3.6.A.1| | 2 |
| Offside Rear Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting |2.4.A.3| | 2 |
| Offside Rear Leaf spring fractured front eye |5.3.1 |b| |i|| | 2 |
| Shock absorber has a serious fluid leak both rear |2.7.3| | 2 |
| Nearside Brake valve insecurely mounted |3.6.A.2a| | 2 |
| Offside Rear Leaf spring with an unsafe modification (5.3.1 (d) (i)) | 2 |
| Rear Brake load sensing valve missing where fitted as standard (1.1.17 (d)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension arm ball joint excessively worn bottom ball joint |5.3.4 |a| |i|| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded Middle Under Inner Sill |2.4.A.3| | 2 |
| Nearside Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 2 |
| Offside Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill corroded (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner sill corroded (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind bumper (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outriggers |2.4.A.3| | 2 |
| Offside Front Body has a sharp edge caused by corrosion wing panel |6.1.C.1| | 2 |
| Towbar fixing obviously of an inappropriate size |6.6.2| | 2 |
| Nearside Inner Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 2 |
| Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded foward |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 2 |
| Offside Front Hydraulic brake cylinder insecurely mounted |3.6.A.2a| | 2 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Headlamp levelling device inoperative both sides (4.1.5 (a)) | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 2 |
| Offside Rear rear brake recording little or no effort footbrake |3.7.B.5a| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 2 |
| Offside Front Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Steering system fouling |2.2.D.2a| | 2 |
| Rear All position lamps adversely affected by the operation of another lamp |4.2.3 |c|| | 2 |
| Central Rear Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 2 |
| Central Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 2 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc outer |2.5.C.1a| | 2 |
| Nearside Front Lower Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i)) | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 2 |
| Offside Front Seat belt not functioning as intended |7.1.2 |c|| | 2 |
| Nearside Rear Anti-roll bar pin or bush likely to become detached (5.3.4 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel |5.3.6 |a| |i|| | 2 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmember |6.6.6| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mount |2.4.A.3| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area as marked (5.3.6 (a) (i)) | 2 |
| Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear most |2.4.G.2| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded coil spring area |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded coil spring area |2.4.A.3| | 2 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Front Suspension arm damaged and seriously weakened |2.4.G.1| | 2 |
| Offside Front Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 2 |
| Nearside Front Lower Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Lower Body insecure and dangerous to other road users |6.1.B.1b| | 2 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 2 |
| Exhaust emissions likely to be affected by an induction leak (8.2.2.1 (b)) | 2 |
| Nearside Rear Inner Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 2 |
| Offside Rear Inner Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 2 |
| Nearside Side repeater obviously incorrectly positioned |1.4.A.2b| | 2 |
| Nearside Rear Upper Leaf spring cracked |2.4.B.1a| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis (5.3.6 (a) (i)) | 2 |
| Offside Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s outer sill |2.4.A.3| | 2 |
| Nearside Rear Brake load sensing valve has been disconnected and was fitted as standard |3.6.E.2| | 2 |
| Nearside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Seat belt anchorage prescribed area is excessively corroded Offside step |5.2.6| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassic |2.4.A.3| | 2 |
| Exhaust has a major leak of exhaust gases rear pipe |7.1.2| | 2 |
| Offside Front front brake juddering severely |3.8.A.2b| | 2 |
| Offside Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor under seat |5.2.6| | 2 |
| Offside Headlamp aim beam image obviously incorrect bulb incorrectly fitted |1.8.A.1b| | 2 |
| Offside Rear Seat belt flexible stalk cable has broken strands |5.1.B.5b| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 2 |
| Front Bonnet primary retaining device ineffective (3.1 (c)) | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 2 |
| Nearside Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 2 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced step (6.1.1 (a) (i)) | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 2 |
| Nearside Body has a projection caused by corrosion sill |6.1.C.1| | 2 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp by indicator |1.2.1f| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded undersill |2.4.A.3| | 2 |
| Front Track rod end ball joint has excessive play offside and nearside |2.2.B.1f| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 2 |
| Brake linkage locking device missing |3.5.1l| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Stop lamp(s) missing (4.3.1 (a) (ii)) | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S FRONT INNER WINGS |5.3.6 |a| |i|| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 2 |
| Front Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear spring hanger (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Towbar with an unsafe modification to primary components (6.1.6 (g) (ii)) | 2 |
| Nearside Front Headlamp missing |1.7.3| | 2 |
| Nearside Other passenger door likely to open inadvertently or not remain closed in the case of a sliding door |6.2.3 |b| |i|| | 2 |
| Offside Rear Bumper insecure |6.1.4 |a| |i|| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 2 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill front of spring |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing marked yellow (5.3.6 (a) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill and step |2.4.A.3| | 2 |
| Offside Rear Brake cable has restricted free movement (1.1.15 (e)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi rail |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi rail (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi rail (5.3.6 (a) (i)) | 2 |
| Offside Headlamp light intensity severely reduced |4.1.4 |a|| | 2 |
| Nearside Front Torsion bar excessive play at an end fixing |2.4.E.2| | 2 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step panel |6.1.B.2| | 2 |
| Offside Rear Brake pipe excessively damaged |1.1.11 |c|| | 2 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mounting |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mounting |5.3.6 |a| |i|| | 2 |
| Offside Trailing arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings UNDER BONNET |6.1.B.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerwing (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi above axle |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi above axle |2.4.A.3| | 2 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member |6.1.B.2| | 2 |
| Nearside Rear Obligatory mirror does not provide a view to the rear (3.3 (c)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 2 |
| Offside Headlamp are incorrectly positioned |4.1.4 |a|| | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Front Brake pipe inappropriately repaired |3.6.A.3| | 2 |
| Centre Rear Lower Spare wheel insecure |6.4.2| | 2 |
| Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer arch |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 2 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer arch |6.1.B.2| | 2 |
| Rear Service brake excessively binding both (1.2.1 (f)) | 2 |
| Offside Front Trailing arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Rear position lamp|s| incorrect colour showing white light |1.1.A.3e| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of front spring hanger |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of front spring hanger |2.4.A.3| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch x two places |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis behind nearside rear wheel |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind brake compensator |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded passenger seat mounting |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis to cross member |2.4.A.3| | 2 |
| brake caliper has restricted free movement |3.5.1k| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 2 |
| Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Steering system excessively rough |2.2.D.1| | 2 |
| Offside Front Inner Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under valance |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 2 |
| Offside Front Headlamp aim beam image obviously incorrect bulb fitted incorrectly |1.8.A.1b| | 2 |
| Nearside Outer Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above exhaust (6.1.1 (c) (i)) | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Fuel tank insecure tank support strap corroded |7.2.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch / floor |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch / floor |2.4.A.3| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor |6.1.A.1| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at front spring hanger |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring Hanger |2.4.A.3| | 2 |
| Nearside Direction indicator flashing more than 120 times a minute all |1.4.A.2g| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 2 |
| Offside Rear Lower Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outrigger |6.1.1 |a| |i|| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Central Rear Lower Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 2 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis |3.1.9| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut mount area |2.4.A.3| | 2 |
| Offside Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Nearside Rear Lower Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion innersill |6.1.C.1| | 2 |
| Nearside Rear passenger door cannot be opened from outside the vehicle side door |6.2.B.1c| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting |2.4.A.3| | 2 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Nearside Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion inner wing |6.1.C.1| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion inner arch |6.1.C.1| | 2 |
| Offside Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Exhaust has a major leak of exhaust gases hole in tailpipe |7.1.2| | 2 |
| Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 2 |
| Driver`s view to side impaired by crack |6.9.1b| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal |5.3.6 |a| |i|| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/floor area |2.4.A.3| | 2 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step (6.1.1 (c) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded engine mount |2.4.A.3| | 2 |
| Nearside Rear Inner Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 2 |
| Oil leaking excessively from engine oil filter (8.4.1 (a) (i)) | 2 |
| Offside Front Radius arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Outer Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring (5.3.6 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step/sill |5.2.6| | 2 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangers |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangers |5.3.6 |a| |i|| | 2 |
| Rear front brake binding |3.7.B.1| | 2 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill step |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/ step |5.2.6| | 2 |
| Nearside Rear Bonded suspension unit damaged and cannot function as intended bump stop missing |2.4.F.3| | 2 |
| Exhaust has a major leak of exhaust gases emissions not tested |7.1.2| | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH (6.2.2 (d) (i)) | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under bonnet (6.1.1 (c) (i)) | 2 |
| Rear Lower Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Outer Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Offside Front Upper Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Offside Outer Front Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innerwing |6.1.B.2| | 2 |
| Rear Bumper insecure |6.1.4 |a| |i|| | 2 |
| Nearside All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Offside Upper Rear position lamp|s| missing |1.1.A.3a| | 2 |
| Offside Front Lower Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Inner Ball joint has excessive play |2.2.B.1f| | 2 |
| Centre Brake cable locking device insecure |3.5.1l| | 2 |
| Centre Rear Spare wheel insecure |6.4.2| | 2 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 2 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill (6.2.2 (d) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded undersill |2.4.A.3| | 2 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded passenger step |5.2.6| | 2 |
| Nearside Rear Rear position lamp|s| not working side light |1.1.A.3b| | 2 |
| Vehicle Identification Number not legible |0.2 |b|| | 2 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush loose |2.4.G.2| | 2 |
| Offside Outer Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Rear Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 2 |
| Seat belt anchorage prescribed area is excessively corroded Both inner sills |5.2.6| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wings |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mount |6.1.1 |c| |i|| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mount |6.1.1 |c| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 2 |
| Hazard warning switch faulty not working |1.4.B.1d| | 2 |
| Nearside Rear Brake valve damaged |3.6.A.2c| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step area |7.1.1 |a| |i|| | 2 |
| Offside Rear Leaf spring deteriorated and seriously weakened broken |2.4.B.1a| | 2 |
| Nearside Rear Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Front Body has a sharp edge caused by corrosion WING |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 2 |
| Rear Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp bad earth (4.4.3 (b)) | 2 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 2 |
| Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Upper Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg under bonnet |2.4.A.3| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 2 |
| Lower Steering column shaft has excessive end float |2.1.3| | 2 |
| Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Offside Front Seat belt installation has cut and/or reworked original webbing (10.1 (a)) | 2 |
| Nearside Front Lower Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Rear Emergency exit door does not latch securely closed |6.2.D.1b| | 2 |
| Offside Front Steering column shaft retaining device insecure |2.1.6| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 2 |
| Spare wheel insecure in carrier (6.1.5 (b) (i)) | 2 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 2 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear of |2.4.G.2| | 2 |
| Nearside Rear Outer Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Offside Rear Outer Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Offside Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Rear Statutory seat belt missing buckle missing |5.1.1| | 2 |
| Fuel system component leaking injector area (6.1.3 (b) (i)) | 2 |
| Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced as marked |7.1.1 |a| |i|| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner Sill |5.2.6| | 2 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill |6.1.B.2| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded middle inner sill |5.2.6| | 2 |
| Offside Rear Tie bar/rod rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Brake master cylinder insecurely mounted |3.6.G.1a| | 2 |
| Offside Front Headlamp levelling device inoperative |1.7.2| | 2 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush front bush |2.4.B.2| | 2 |
| Offside Brake hose leaking |3.6.A.1| | 2 |
| Nearside Front Rear reflector missing |1.5.1a| | 2 |
| Offside Lower All position lamps not working |1.1.A.3b| | 2 |
| Offside Body has a sharp edge caused by corrosion sill area |6.1.C.1| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis corroded |5.2.6| | 2 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 2 |
| Offside Front Suspension arm pin or bush excessively worn rearmost (5.3.4 (a) (i)) | 2 |
| Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Body insecure and dangerous to other road users wheel arch |6.1.B.1b| | 2 |
| Offside Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab (7.1.1 (a) (i)) | 2 |
| Prop shaft likely to become detached |6.1.7 |a| |ii|| | 2 |
| Nearside Front Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 2 |
| Nearside Front position lamp|s| not working side marker |1.1.A.3b| | 2 |
| Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Front Direction indicator incomplete |1.5.A1b| | 2 |
| Nearside Front Rear position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Offside Rear Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Central Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 2 |
| Nearside Front Steering column universal joint has excessive play |2.1.5| | 2 |
| Nearside Rear position lamp|s| not working marker |1.1.A.3b| | 2 |
| Centre Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 2 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded and outer sills |2.4.A.3| | 2 |
| Centre Front Power steering component|s| leaking |2.3.3b| | 2 |
| Brake pipe inadequately clipped bulk head |3.6.B.1| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded step |2.4.A.3| | 2 |
| Nearside Rear Seat belt anchorage loose insecure (7.1.1 (b)) | 2 |
| Offside Rear Seat belt anchorage loose insecure (7.1.1 (b)) | 2 |
| Nearside Rear Seat belt anchorage loose (7.1.1 (b)) | 2 |
| Offside Rear Seat belt anchorage loose (7.1.1 (b)) | 2 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 2 |
| Offside Rear Upper Tailgate cannot be secured in the closed position |6.4.1| | 2 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement temp type |7.2.4b| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step rotten |5.2.6| | 2 |
| Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill/step |5.2.6| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear outer sill |6.1.B.2| | 2 |
| Nearside Rear Lower Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement most rear |2.4.G.2| | 2 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt boot split (5.3.4 (b) (ii)) | 2 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt boot split (5.3.4 (b) (ii)) | 2 |
| Central Exhaust system insecure |6.1.2 |a|| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 2 |
| Front Driver`s airbag obviously defective |5.4.1| | 2 |
| Centre Passenger door cannot be opened from outside the vehicle |6.5.11a| | 2 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the gauge has reached the warning mark |3.3.E.5a| | 2 |
| Brake hydraulic reservoir retaining device missing |3.6.A.2d| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced seat mount (7.1.1 (a) (i)) | 2 |
| Nearside Rear Tie bar/rod worn and seriously weakened |2.4.G.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring mounting |2.4.A.3| | 2 |
| Front position lamp|s| adversely affected by the operation of another lamp both |1.1.A.3f| | 2 |
| Centre Stop lamp not working |1.3.2a| | 2 |
| Offside Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |6.4.B.2| | 2 |
| Offside Front Headlamp aim aimed so that it dazzles other road users |1.6| | 2 |
| Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 2 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Rear Brake hose twisted |3.6.B.4c| | 2 |
| Front Anti-roll bar fractured (5.3.3 (b) (ii)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG (6.1.1 (c) (i)) | 2 |
| Nearside Rear Rear position lamp|s| incorrect colour showing white light |1.1.A.3e| | 2 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 2 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area (6.2.2 (d) (i)) | 2 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill (6.1.1 (d) (i)) | 2 |
| Rear Emergency exit window cannot be opened from outside the vehicle |6.2.D.1a| | 2 |
| Front Prop shaft securing bolt loose (6.1.7 (a) (i)) | 2 |
| Nearside Rear Outer Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 3 (5.3.6 (a) (i)) | 2 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember |3.1.9| | 2 |
| Rear Body insecure and dangerous to other road users rear doors |6.1.B.1b| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill |6.1.B.2| | 2 |
| Nearside front brakes release unevenly slow |3.7.B.4| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front mount |2.4.A.3| | 2 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear crossmember |6.1.B.2| | 2 |
| Offside Rear Body component likely to become detached mud guard (6.2.1 (a) (ii)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 2 |
| Nearside Seat belt not functioning as intended |7.1.2 |c|| | 2 |
| Offside Front Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 2 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 2 |
| Central Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 2 |
| coil spring broken |2.4.C.1a| | 2 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mount |2.4.A.3| | 2 |
| Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
| Steering column shaft has excessive end float |2.1.3| | 2 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Steering box leaking to the extent that oil is dripping |2.1.1 |e| |ii|| | 2 |
| Nearside Rear Upper Hinged tailboard cannot be secured in the closed position |6.4.1| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded marked yellow (6.1.1 (c) (i)) | 2 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded marked yellow (6.1.1 (c) (i)) | 2 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail corroded marked yellow (6.1.1 (c) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 2 |
| Rear Entrance/exit door ???door open` warning device inoperative |6.2.C.3| | 2 |
| Nearside Front Bonded suspension unit attachment cracked |2.4.F.1b| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded marked yellow |5.2.6| | 2 |
| Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.6| | 2 |
| Offside front brakes release unevenly |3.8.A.2d| | 2 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Front Track rod end seriously misaligned (2.1.3 (e)) | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis |6.1.B.2| | 2 |
| Nearside Front Vehicle Identification Number not legible |6.3.5.a| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Central Rear Brake load sensing valve defective and function impaired |3.6.E.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion cross member |6.1.C.1| | 2 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush Rear bush |2.5.A.1c| | 2 |
| Offside Front Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced back of cab (7.1.1 (a) (i)) | 2 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced behind cab (6.1.1 (a) (i)) | 2 |
| Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 2 |
| Nearside Rear Upper Shock absorbers insecurely attached |5.3.2 |a| |i|| | 2 |
| Nearside Front Outer Front constant velocity joint is insecure |2.5.C.1b| | 2 |
| Offside Front Direction indicator not working wing |1.4.A.2c| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor hole |6.1.B.2| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 2 |
| Nearside Body has a sharp edge caused by corrosion body |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis crossmember |2.4.A.3| | 2 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Rear Outline marker lamp missing |4.2.1 |a|| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outrigger |6.1.B.2| | 2 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter panel |6.1.B.2| | 2 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Front Lower Suspension arm fractured |2.4.G.1| | 2 |
| Rear Tailgate cannot be secured in the closed position (6.2.1 (e)) | 2 |
| Nearside Rear Lower Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 2 |
| Offside Leaf spring eye defective |shackle| |2.4.B.1b| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember corroded through |6.1.B.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 2 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre crossmember |3.1.9| | 2 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember |1.1.21 |e| |i|| | 2 |
| Nearside Brake cable knotted |3.5.1b| | 2 |
| Brake performance not tested leaking brake pipe |1.2.1 |g|| | 2 |
| Rear Body has a sharp edge caused by damage tailgate |6.1.C.1| | 2 |
| Offside Front Sub-frame locating pin insecure |2.4.G.3a| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay (5.3.6 (a) (i)) | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 2 |
| Offside Front Macpherson strut mounting corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 2 |
| Nearside Rear Stop lamp obviously incorrectly positioned |1.2.1a| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Nearside Rear Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 2 |
| Rear Shock absorbers has a serious fluid leak both (5.3.2 (b)) | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step (6.2.2 (d) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step (6.2.2 (d) (i)) | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn Rear bush. (5.3.4 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step/inner sill |5.2.6| | 2 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 2 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i)) | 2 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mounting (5.3.6 (a) (i)) | 2 |
| Nearside Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 2 |
| Offside Body has a sharp edge caused by damage mirror back |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 2 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i)) | 2 |
| Central Front Prop shaft securing bolt missing (6.1.7 (a) (i)) | 2 |
| Nearside Rear Electrical wiring damaged, likely to cause a short |1.9.2b| | 2 |
| Offside Rear Leaf spring shackle bracket nut missing |2.4.B.6c| | 2 |
| Offside Front Driver`s door cannot be opened from outside the vehicle |6.5.11a| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 2 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded IN SEVEREL PLACES |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded IN SEVEREL PLACES |2.4.A.3| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded IN SEVAREL PLACES UNDER ARCH |2.4.A.3| | 2 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH IN SEVAREL PLACES |2.4.A.3| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded quarter |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded quarter |2.4.A.3| | 2 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bushes |2.4.G.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to floor |5.3.6 |a| |i|| | 2 |
| Offside Front Power steering pump leaking from a failed component |2.3.3b| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill |6.1.B.2| | 2 |
| Nearside Front Brake disc insecure bolt missing (1.1.14 (a) (ii)) | 2 |
| Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to sill corroded through |6.1.B.2| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 2 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Suspension component mounting prescribed area is excessively corroded both rear inner sills |2.4.A.3| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp by indicator |4.2.3 |c|| | 2 |
| Centre Front Lower Fuel system component leaking |7.2.3| | 2 |
| Nearside Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear panel |6.6.6| | 2 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 2 |
| Bonnet primary retaining device ineffective wont open (3.1 (c)) | 2 |
| Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 2 |
| Offside Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area |7.1.1 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 2 |
| Offside Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Front rear brakes release unevenly |3.7.B.4| | 2 |
| Front Exhaust has a major leak of exhaust gases pipe |7.1.2| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn Rear bush |5.3.4 |a| |i|| | 2 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 2 |
| Nearside Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 2 |
| Offside Front Tie bar/rod damaged and seriously weakened |2.4.G.1| | 2 |
| Nearside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Driver`s door cannot be opened from outside the vehicle |6.2.3 |a|| | 2 |
| Suspension component mounting prescribed area is excessively corroded both rear inner arches |2.4.A.3| | 2 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush rear |2.4.G.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at spring hanger |2.4.A.3| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g)) | 2 |
| Offside Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i|| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor |5.3.6 |a| |i|| | 2 |
| Brake cable guide defective and affecting operation |1.1.15 |d|| | 2 |
| Nearside All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 2 |
| Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 2 |
| Offside Front Body has a sharp edge caused by corrosion outer wing |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 2 |
| Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 2 |
| Centre Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 2 |
| Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |6.4.B.2| | 2 |
| Offside front brake binding |3.8.A2a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 2 |
| Offside Front Lower Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Nearside Outer Front Lower Ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 2 |
| Nearside Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 2 |
| Offside Inner Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WING |6.1.B.2| | 2 |
| Nearside Outer Front Side repeater not working |1.4.A.2c| | 2 |
| Front Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 2 |
| Lower Steering column universal joint insecure |2.1.5| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 2 |
| Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded above axle |2.4.A.3| | 2 |
| Nearside Front Body panel corroded and likely to cause injury Wing |6.2.1 |a| |i|| | 2 |
| Nearside Rear Oil leaking excessively from transmission (8.4.1 (a) (i)) | 2 |
| Prop shaft bearing excessively worn both bearings (6.1.7 (b) (i)) | 2 |
| Offside Rear Stop lamp emits other than a steady red light lens broken |1.2.1e| | 2 |
| Nearside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 2 |
| Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 2 |
| Nearside Rear Wheel bolt|s| missing |4.2.A.1e| | 2 |
| Nearside coil spring incomplete |2.4.C.1a| | 2 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Rear Shock absorber has a serious fluid leak |2.6.3| | 2 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Nearside Rear Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Bonnet retaining device ineffective unable to open bonnet |8.4.2| | 2 |
| Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer cill |2.4.A.3| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 2 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` sat nav holder |8.3.1e| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floor/ step |2.4.A.3| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 2 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring mounting |2.4.A.3| | 2 |
| Nearside Front Loading door cannot be secured in the closed position |6.4.1| | 2 |
| Front Brake pedal pad not secure to the pedal |3.3.A.1c| | 2 |
| Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***step*** |6.1.B.2| | 2 |
| Offside Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near load sensing valve |6.1.A.1| | 2 |
| Offside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount marked in yellow |2.4.A.3| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring hanger |6.1.B.2| | 2 |
| Offside Inner brake disc in such a condition that it is seriously weakened |3.5.1i| | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both (5.3.6 (a) (i)) | 2 |
| Nearside Rear Lower Suspension spring mounting prescribed area is fractured |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 2 |
| Headlamp aim beam image obviously incorrect BOTH |1.8.A.1b| | 2 |
| Centre Statutory seat belt missing buckle |5.1.1| | 2 |
| Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Nearside Front Outer Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 2 |
| Outer Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 2 |
| Offside Outer Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp both sides |1.1.A.3f| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Outer Front Anti-roll bar insecure |2.4.G.1| | 2 |
| Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b)) | 2 |
| Front Outline marker lamp not working |4.2.1 |a|| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/step |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/step |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step/sill |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WING |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FRONT & REAR MOUNTS |2.4.A.3| | 2 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outrigger |2.4.A.3| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2| | 2 |
| Offside Rear Wheel bolt|s| loose |4.2.A.1e| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Offside Rear Upper Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded door step sill |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 2 |
| Offside Floor excessively deteriorated (6.2.4 (a) (i)) | 2 |
| Front Body has a sharp edge caused by damage bumper |6.1.C.1| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill and step |5.2.6| | 2 |
| Fuel system component leaking around pump |7.2.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount outer sill |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is fractured spring front mount |2.4.A.3| | 2 |
| Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 2 |
| Wheel nut|s| loose |4.2.A.1e| | 2 |
| Rear Outline marker lamp missing n/s and o/s (4.2.1 (a) (ii)) | 2 |
| Offside Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 2 |
| Centre Front Lower Horn not working |1.6.2a| | 2 |
| Nearside Upper Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 2 |
| Rear Shock absorbers has a serious fluid leak Both |5.3.2 |b|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor area under seat |5.2.6| | 2 |
| Nearside Inner Rear Brake load sensing valve seized |3.6.E.3| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 2 |
| Nearside Front Body panel corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 2 |
| Anti-roll bar linkage pin or bush excessively worn both rear |5.3.4 |a| |i|| | 2 |
| Nearside Front Body component damaged and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING (5.3.6 (a) (i)) | 2 |
| Nearside Rear Front position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Offside Rear Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 2 |
| Offside Front Upper Stop lamp not working |1.2.1b| | 2 |
| Offside Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle |6.1.A.1| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step Area |6.1.B.2| | 2 |
| Offside Front Outer Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 2 |
| Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 2 |
| Nearside Outer Rear Road wheel badly damaged |4.2.A.1a| | 2 |
| Brake hydraulic reservoir cap missing (1.1.10 (e)) | 2 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step area |5.3.6 |a| |i|| | 2 |
| Towbar attachment insecure |6.1.6 |c| |i|| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 2 |
| Nearside Rear Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Nearside Inner Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Inner Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Parking brake lever defective so that it cannot be satisfactorily operated |1.1.6 |d|| | 2 |
| Offside Front Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple (5.3.6 (a) (i)) | 2 |
| Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Nearside Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp Affected by indicator (4.2.3 (c)) | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 2 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Offside Outer Front Lower Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Upper Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Outline marker lamp not working all (4.2.1 (a) (ii)) | 2 |
| Offside Rear Brake cable damaged fouling wheel (1.1.15 (a)) | 2 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear |2.4.G.2| | 2 |
| Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i)) | 2 |
| Nearside Front Body has a projection caused by damage bumper loose |6.1.C.1| | 2 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Nearside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill |2.4.A.3| | 2 |
| Nearside Front Service brake indicates brake judder |3.7.D.1| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced foot step (7.1.1 (a) (i)) | 2 |
| Nearside Front Headlamp aim beam image obviously incorrect bulb fitted incorrectly |1.8.A.1b| | 2 |
| Nearside Front Brake pipe excessively damaged (1.1.11 (c)) | 2 |
| Offside Front Suspension component corroded and seriously weakened chassis (5.3.3 (b) (i)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi leg |2.4.A.3| | 2 |
| Nearside Front Body component corroded and likely to cause injury step (6.2.1 (a) (i)) | 2 |
| Nearside Front Inner Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 2 |
| Offside Front Inner Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 2 |
| Rear Position lamp not working both sides (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front & rear |2.4.A.3| | 2 |
| Side repeater incomplete |1.5.A1b| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outter sil |2.4.A.3| | 2 |
| Offside Front Body insecure and dangerous to other road users bumper corner insecure |6.1.B.1b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounting area |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounting area |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted inner wheel arch |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is severely distorted inner wheel arch |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing. (5.3.6 (a) (i)) | 2 |
| Fuel system component leaking |6.1.3 |b| |i|| | 2 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch / floor |2.4.A.3| | 2 |
| Offside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill corroded front to back. (6.2.2 (d) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mount |5.3.6 |a| |i|| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by bump stop (6.1.1 (c) (i)) | 2 |
| Offside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 2 |
| Offside Side repeater obviously incorrectly positioned (4.4.3 (a)) | 2 |
| Nearside Rear Outer Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front & rear |5.3.6 |a| |i|| | 2 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount |5.3.6 |a| |i|| | 2 |
| Central Exhaust has a major leak of exhaust gases silencer |7.1.2| | 2 |
| Central Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis behind wheel |6.1.B.2| | 2 |
| Body insecure and dangerous to other road users bonnet |6.1.B.1b| | 2 |
| Offside Front Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 2 |
| Offside Front Suspension arm attachment bracket inappropriately repaired |2.4.A.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/step (7.1.1 (a) (i)) | 2 |
| Offside Front Body component corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D-bush (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn D-bush (5.3.4 (a) (i)) | 2 |
| Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 2 |
| Power steering pipe/hose corroded such that the steering is adversely affected |2.1.5 |g| |ii|| | 2 |
| Offside Front Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step to inner sill |5.2.6| | 2 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front |2.4.B.2| | 2 |
| Offside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front |2.4.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Centre Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Leaf spring shackle bracket bolt missing |2.4.B.6c| | 2 |
| Offside Rear Brake cable guide defective and affecting operation (1.1.15 (d)) | 2 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Brake valve leaking load valve (1.1.7 (d) (i)) | 2 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded door step x2 places |2.4.A.3| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill x2 places |2.4.A.3| | 2 |
| Bumper insecure |6.1.4 |a| |i|| | 2 |
| Offside Front Lower Bonded suspension unit bonding failed and part of the unit is likely to become displaced |2.4.F.2| | 2 |
| Offside Front Bonded suspension unit deteriorated and cannot function as intended wishbone bush |2.4.F.3| | 2 |
| Rear Towbar attachment insecure (6.1.6 (c) (i)) | 2 |
| Nearside Front Service brake juddering severely |3.7.C.2| | 2 |
| Offside Front Direction indicators missing |1.4.A.2b| | 2 |
| Offside Rear Rear position lamp|s| does not face the rear |1.1.A.3a| | 2 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner step area (6.2.2 (d) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step area (6.2.2 (d) (i)) | 2 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i)) | 2 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i)) | 2 |
| Bonnet primary retaining device insecure |3.1 |c|| | 2 |
| Nearside Body has a sharp edge caused by damage mirror housing |6.1.C.1| | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under step (7.1.1 (a) (i)) | 2 |
| Offside Rear Lower Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Prop shaft flexible coupling excessively deteriorated Centre carrier (6.1.7 (d) (i)) | 2 |
| Offside Front Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Front Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 2 |
| Rear Anti-roll bar linkage insecure both sides |2.4.G.1| | 2 |
| Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Nearside Front Obligatory mirror insecure (3.3 (b) (ii)) | 2 |
| Nearside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 2 |
| Offside Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Prop shaft flexible coupling excessively deteriorated centre bearing (6.1.7 (d) (i)) | 2 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rearmost |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage loose (7.1.1 (b)) | 2 |
| Central Seat belt retracting mechanism defective (7.1.2 (e)) | 2 |
| Central front brake binding |3.7.B.1| | 2 |
| Nearside Front Upper Braking system leaking |3.6.A.1| | 2 |
| Nearside Rear Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 2 |
| Offside Front Horn not working (7.7 (a)) | 2 |
| Rear Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Fuel system component leaking excessively or a risk of fire injection pump |6.1.3 |b| |ii|| | 2 |
| Offside Front Upper Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 2 |
| Service brake excessively fluctuating both rear (1.2.1 (e)) | 2 |
| Rear Anti-roll bar pin or bush excessively worn both sides (5.3.4 (a) (i)) | 2 |
| Front Fuel tank insecure strap broken (6.1.3 (a) (i)) | 2 |
| Fuel tank insecure tank strap corroded (6.1.3 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARCH (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARCH (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 2 (5.3.6 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 2 |
| Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside of step |5.2.6| | 2 |
| Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 2 |
| Offside Seat belt retracting mechanism defective |7.1.2 |e|| | 2 |
| Fuel tank insecure tank strap corroded |6.1.3 |a| |i|| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 2 |
| Front Fuel pipe leaking |6.1.3 |b| |i|| | 2 |
| Brake pipe inadequately clipped front to back |3.6.B.1| | 2 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step (6.1.1 (c) (i)) | 2 |
| Nearside Outer Seat belt damaged (7.1.2 (b) (i)) | 2 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Brake hose inappropriately repaired |3.6.A.3| | 2 |
| Offside Front Lower Power steering component|s| leaking |2.3.3b| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top strut mount |2.4.A.3| | 2 |
| Centre Rear Loading door cannot be secured in the closed position |6.4.1| | 2 |
| Offside Driver`s seat insecure |6.2.5 |a| |ii|| | 2 |
| Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Rear Anti-roll bar pin or bush excessively worn d bushes (5.3.4 (a) (i)) | 2 |
| Nearside Front Inner Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 2 |
| Rear Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 2 |
| Rear rear brake recording little or no effort both sides |3.7.B.5a| | 2 |
| Nearside Rear Torque/reaction arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Nearside Rear Lower Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Upper Position lamp not working |4.2.1 |a|| | 2 |
| Bonnet retaining device ineffective Unable to open bonnet |8.4.2| | 2 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement `D` bush |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement `D` bush |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 2 |
| Offside Inner Front Steering arm has relative movement at its fixings |2.2.B.1h| | 2 |
| Rear Anti-roll bar pin or bush excessively worn both d bushes |5.3.4 |a| |i|| | 2 |
| Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
| Bonnet primary retaining device ineffective bonnet will not open (3.1 (c)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 2 |
| Nearside Stop lamp emits other than a steady red light lense broken |1.2.1e| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill |6.1.B.2| | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn D bush |5.3.4 |a| |i|| | 2 |
| Offside Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet |6.1.1 |c| |i|| | 2 |
| Emissions not tested excess black smoke |8.2.2.2 |e|| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 2 |
| Brake pipe likely to become detached or damaged front to rear (1.1.11 (d) (ii)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i)) | 2 |
| Nearside Axle swivel joint has excessive play |2.5.A.3b| | 2 |
| Exhaust fumes causing a danger to health of persons on board |6.1.2 |b| |ii|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/outrigger |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 2 |
| Nearside Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 2 |
| Offside Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner cill |5.2.6| | 2 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill as marked |6.1.1 |c| |i|| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear |6.1.B.2| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 2 |
| Front Body has a sharp edge caused by corrosion both wings |6.1.C.1| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 2 |
| Offside Inner Front Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 2 |
| Offside Rear Additional braking device has inadequate clearance between other components |3.6.I.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch / floor |2.4.A.3| | 2 |
| Rear Brake valve leaking such that brake functionality is affected (1.1.7 (d) (ii)) | 2 |
| Offside Front Suspension arm has excessive play in a pin/bush rear wishbone bush |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back of sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corner near spring hanger |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near spring hanger |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded end of sill |2.4.A.3| | 2 |
| Centre Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Front Windscreen wiper blade missing |3.4 |b| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section near spring hanger (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring hanger (5.3.6 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill and step |5.2.6| | 2 |
| Front Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 2 |
| Offside Front Body panel insecure wing |6.2.1 |a| |i|| | 2 |
| Nearside Front Coil spring worn so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer |2.4.A.3| | 2 |
| Offside Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 2 |
| Nearside Rear Upper Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Headlamp not working on main beam (1.7.5a) | 2 |
| Centre Front Lower Power steering pipe|s| or hose|s| leaking |2.3.3b| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (2.7.3) | 2 |
| Nearside Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear fog lamp not working (1.3.2b) | 2 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1) | 2 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 2 |
| Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| All position lamps not working (1.1.A.3b) | 2 |
| Offside Headlamp not working on dipped beam (1.7.5a) | 2 |
| Offside Rear Floor insecure (6.2.4 (a) (i)) | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 2 |
| Rear Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of |2.4.A.3| | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 2 |
| Brake warning device not visible |or audible| to the driver |3.3.D.2a| | 2 |
| Offside Rear Exhaust system insecure (6.1.2 (a)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by shock |2.4.A.3| | 2 |
| Nearside Inner Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Centre Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Front Lower Macpherson strut insecure |2.4.G.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6| | 2 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush drop link |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush drop link |2.4.G.2| | 2 |
| Stop lamp(s) all missing (4.3.1 (a) (iii)) | 2 |
| Brake cable damaged (1.1.15 (a)) | 2 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 2 |
| Nearside Front Valve stem seriously misaligned |4.1.D.1e| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 2 |
| Front Windscreen wiper not working both (3.4 (a)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle |6.1.1 |c| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis, under bonnet |2.4.A.3| | 2 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill inner and outer (6.2.2 (d) (i)) | 2 |
| Offside Rear Stop lamp obviously incorrectly positioned |1.2.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back sill |2.4.A.3| | 2 |
| Semaphore indicator tell tale not working correctly |1.4.C.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step /sill |6.1.B.2| | 2 |
| Offside Inner Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x2 |5.3.6 |a| |i|| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 2 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 2 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 2 |
| Obligatory mirror seriously damaged, affecting the rear view both |8.1.2a| | 2 |
| Brake hydraulic reservoir locking device insecure |3.6.A.2d| | 2 |
| Power steering ram|s| leaking from a failed seal steering rack |2.3.3b| | 2 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step (6.1.1 (c) (i)) | 2 |
| Front Wheel bearing has excessive play both sides (5.1.3 (a) (i)) | 2 |
| Nearside Rear Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Windscreen wiper missing (3.4 (a)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 2 |
| Nearside Rear Leaf spring slipper rebound pin missing |2.4.B.5| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Nearside Rear Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail corroded |2.4.A.3| | 2 |
| Front coil spring broken |2.4.C.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x/member |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x/member |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded offside front inner arch - top mount |2.4.A.3| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 2 |
| Offside Lower Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 2 |
| Nearside Inner Rear Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring (5.3.6 (a) (i)) | 2 |
| Offside Inner Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded both front inner arches |2.4.A.3| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 2 |
| Anti-roll bar pin or bush excessively worn both rear |5.3.4 |a| |i|| | 2 |
| Seat belt anchorage prescribed area is excessively corroded both inner sills |5.2.6| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis (5.3.6 (a) (i)) | 2 |
| Offside Front Outer Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 2 |
| Offside Front Upper Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer rigger |2.4.A.3| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wishbone bush |2.4.G.2| | 2 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear bush |2.4.G.2| | 2 |
| Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Rear Lower Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 2 |
| Nearside Rear Body has a sharp edge caused by damage light lense |6.1.C.1| | 2 |
| Nearside Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 2 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 2 |
| rear brake recording little or no effort Both |3.7.B.5a| | 2 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 2 |
| Front Exhaust has a major leak of exhaust gases flexi pipe |7.1.2| | 2 |
| Offside Front suspension locking device ineffective |2.5.A.4| | 2 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced under bonnet (6.1.1 (a) (i)) | 2 |
| Offside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER WING |2.4.A.3| | 2 |
| Driver`s door catch insecure |6.2.3 |c| |ii|| | 2 |
| Nearside Rear Brake load sensing valve obviously incorrectly adjusted |3.6.E.3| | 2 |
| Nearside Front Seat belt missing (7.1.2 (a)) | 2 |
| Fuel tank insecure tank strap snapped |7.2.1| | 2 |
| Front drive shaft coupling is excessively worn |2.5.C.1c| | 2 |
| Nearside Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under arch |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch box (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i)) | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn back bush (5.3.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis rails / inner flitches (5.3.6 (a) (i)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow (6.1.1 (c) (i)) | 2 |
| Nearside Front brake drum excessively pitted |3.5.1h| | 2 |
| Offside Front brake drum excessively pitted |3.5.1h| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to chassis |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to floor |2.4.A.3| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sil |6.1.B.2| | 2 |
| Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 2 |
| Front Lower Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 2 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i)) | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear spring front mounting |2.4.A.3| | 2 |
| Nearside Rear Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 2 |
| Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 2 |
| Rear Lower Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Outer Front Upper Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Stop lamp missing |1.2.1a| | 2 |
| Offside Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 2 |
| Front Steering system excessively tight |2.2.D.1| | 2 |
| Offside Towbar mounting obviously of an inappropriate type |6.6.2| | 2 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower inner sill |2.4.A.3| | 2 |
| Nearside Front Body panel damaged and likely to cause injury wing (6.2.1 (a) (i)) | 2 |
| Nearside Outer Rear All position lamps not working |1.1.A.3b| | 2 |
| Front Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Rear Shock absorber has a serious fluid leak offside and nearside |2.7.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel |5.3.6 |a| |i|| | 2 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow |6.1.B.2| | 2 |
| Offside Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing |5.3.6 |a| |i|| | 2 |
| Nearside Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 2 |
| Nearside Inner Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills |6.2.2 |d| |i|| | 2 |
| Offside Front Lower Macpherson strut ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Oil leaking excessively from engine engine |8.4.1 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer chassis leg (5.3.6 (a) (i)) | 2 |
| Offside Front brake disc excessively pitted (3.5.1h) | 2 |
| Offside Front Brake prescribed area is excessively corroded (1.1.21 (e) (i)) | 2 |
| Nearside Front Braking system leaking caliper |3.6.A.1| | 2 |
| Offside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Nearside Body has a sharp edge caused by damage sliding door handle |6.1.C.1| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 2 |
| Nearside Front Body component damaged and likely to cause injury wing |6.2.1 |a| |i|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner + outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 2 |
| Nearside Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Offside obligatory indirect vision device missing |8.1.1| | 2 |
| Offside Front Lower Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area |5.3.6 |a| |i|| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 2 |
| Nearside Rear Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill/arch |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/door step |5.2.6| | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wing |6.1.B.2| | 2 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet |6.1.A.1| | 2 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner wing |2.2.C.1h| | 2 |
| Nearside Front Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 2 |
| Rear Leaf spring anchor bracket loose |2.4.B.6a| | 2 |
| Offside Rear fog lamp obviously incorrectly positioned |4.5.4 |a|| | 2 |
| Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 2 |
| Central Front Seat belt damaged (7.1.2 (b) (i)) | 2 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Offside Front Upper Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Central Front Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 2 |
| Offside Front Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock mount |5.3.6 |a| |ii|| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 2 |
| Nearside Front Tie bar/rod ball joint dust cover missing |2.4.G.2| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch x2 |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near shocker mount |2.4.A.3| | 2 |
| Offside Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mount (5.3.6 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i)) | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 2 |
| Nearside Rear window|s| missing |6.9.2| | 2 |
| Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 2 |
| Centre Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/spare wheel carrier |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/spare wheel carrier |2.4.A.3| | 2 |
| Driving control|s| cracked |6.8.1b| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing panel |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 2 |
| Front Subframe mounting prescribed area is excessively corroded Both sides |2.4.A.3| | 2 |
| Offside Rear Rear position lamp|s| incorrect colour lens broken |1.1.A.3e| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel |2.4.A.3| | 2 |
| Centre Rear Trailer electrical socket insecure |1.9.3a| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 2 |
| Offside Front Body has a sharp edge caused by corrosion outersill |6.1.C.1| | 2 |
| Nearside Rear Brake actuating linkage mounting prescribed area is inadequately repaired chassis |3.3.A.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting |6.1.B.2| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill as marked |2.4.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Nearside Body has a sharp edge caused by damage Mirror |6.1.C.1| | 2 |
| Offside Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chasssis |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded various places |2.4.A.3| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 2 |
| Offside Rear Anti-roll bar severely distorted |2.4.G.1| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting |5.3.6 |a| |i|| | 2 |
| Service brake is causing the vehicle to swerve to the offside |3.7.C.2| | 2 |
| Rear Seat belt stitching badly frayed |5.2.2b| | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis (5.3.6 (a) (i)) | 2 |
| Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached |6.1.6 |i| |ii|| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger |6.2.2 |d| |i|| | 2 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 2 |
| Nearside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner sill |6.1.B.2| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r outer sill |6.1.B.2| | 2 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer |6.1.A.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front |2.4.A.3| | 2 |
| Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 2 |
| Front Service brake indicates brake bind |3.7.D.2a| | 2 |
| Central Brake pipe leaking |3.6.A.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step backplate |5.2.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Behind seat |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Behind seat |5.2.6| | 2 |
| Nearside Front Position lamp showing red light to the front (4.2.3 (a) (ii)) | 2 |
| Offside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Oil leaking excessively from engine oil filter |8.4.1 |a| |i|| | 2 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bushes both sides |2.4.G.2| | 2 |
| Nearside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Offside Rear Lower Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Inner Front Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i)) | 2 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 2 |
| Nearside Rear Direction indicators have less than 50% of the light sources illuminating |1.4.A.2c| | 2 |
| Offside Rear Leaf spring to axle fixing bolt insecure front bolt (5.3.1 (a) (i)) | 2 |
| Anti-roll bar linkage has excessive play in a ball joint both rear |2.4.G.2| | 2 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear d bushers |2.4.G.2| | 2 |
| Nearside Ball joint has excessive play track rod end |2.2.B.1f| | 2 |
| Nearside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Centre Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Front Brake disc significantly and obviously worn X2 (1.1.14 (a) (i)) | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 2 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 2 |
| Offside Rear Braking system leaking (1.1.3 (d)) | 2 |
| Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 2 |
| Front Suspension arm pin or bush excessively worn both (5.3.4 (a) (i)) | 2 |
| Nearside Rear Upper Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill in 2 places |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor around inner arch at front and rear of rear wheel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor around inner arch at front and rear of rear wheel |5.3.6 |a| |i|| | 2 |
| Offside Inner Front Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r inner arch |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded rear cross members |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear |2.4.A.3| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i)) | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/door step (5.3.6 (a) (i)) | 2 |
| Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced bump stop |2.4.F.2| | 2 |
| Nearside Rear Brake valve leaking (1.1.7 (d) (i)) | 2 |
| Offside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step under vehicle |6.1.B.2| | 2 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush Rear bush |2.4.G.2| | 2 |
| Central Rear Statutory seat belt missing buckle |5.1.1| | 2 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 2 |
| Nearside Front Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 2 |
| Offside Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg above rear axle |6.1.B.2| | 2 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement front |2.4.G.2| | 2 |
| Offside Front Sub-frame attachment bracket/mounting insecure |5.3.3 |a| |i|| | 2 |
| Additional braking device insecure |3.6.I.1| | 2 |
| Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring eye |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front & rear mount |2.4.A.3| | 2 |
| Offside Rear Leaf spring fractured front eye broken |2.4.B.1a| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 2 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded load valve |3.3.A.2| | 2 |
| Central Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis |6.2.2 |d| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 2 |
| Central Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 2 |
| Rear Service brake indicates brake bind |3.7.D.2a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear end |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 2 |
| Offside Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 2 |
| Centre Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 2 |
| Offside Front Electrical wiring inadequately supported |1.9.2a| | 2 |
| Nearside Front Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis to floor |6.1.B.2| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wing |6.1.A.1| | 2 |
| Nearside window|s| missing |6.9.2| | 2 |
| Rear Exhaust has part of the system excessively deteriorated |6.3.1a| | 2 |
| Offside Front Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting area |2.4.A.3| | 2 |
| Offside Inner Front Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 2 |
| Offside Outer Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Suspension component mounting prescribed area is excessively corroded rear x member |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s + n/s/f inner wings |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s/r chassis |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 2 |
| Fuel tank insecure tank straps corroded (6.1.3 (a) (i)) | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen both |4.1.2 |a|| | 2 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement back bush |2.4.G.2| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills corroded through in places |6.1.B.2| | 2 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view door |8.1.2a| | 2 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering centre |6.1.A.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount area |2.4.A.3| | 2 |
| Centre Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 2 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering under sill |6.1.A.1| | 2 |
| Nearside Rear Braking system leaking brake drum area |3.6.A.1| | 2 |
| Nearside Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bumper |6.1.1 |c| |i|| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEELARCH |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 2 |
| Front Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 2 |
| Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner eage |6.1.B.2| | 2 |
| Nearside Inner Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 2 |
| Offside Front Suspension component ball joint dust cover missing |5.3.4 |b| |ii|| | 2 |
| Nearside Front Suspension component ball joint dust cover missing |5.3.4 |b| |ii|| | 2 |
| Central Front Horn not working |1.6.2a| | 2 |
| Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 2 |
| Central Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by shock |2.4.A.3| | 2 |
| Nearside Rear Anti-roll bar linkage insecure bolt missing |2.4.G.1| | 2 |
| Adjustable towbar locating pin missing |6.6.5a| | 2 |
| Offside Upper Hinged tailboard cannot be secured in the closed position |6.4.1| | 2 |
| Nearside Rear Seat belt buckle not functioning as intended |7.1.2 |d|| | 2 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step |6.1.1 |c| |i|| | 2 |
| Rear Anti-roll bar pin or bush excessively worn Both |5.3.4 |a| |i|| | 2 |
| Nearside Front Headlamp lens seriously defective |4.1.1 |b| |ii|| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i)) | 2 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Body component corroded and likely to cause injury WING (6.2.1 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/turret (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis member |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mount area |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mount area |2.4.A.3| | 2 |
| Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 2 |
| Nearside Front Upper All position lamps not working |4.2.1 |a|| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 2 |
| Offside Front Body component damaged and likely to cause injury wing (6.2.1 (a) (i)) | 2 |
| Offside Rear Hazard warning lamps operated by more than one switch |1.4.B.1c| | 2 |
| Nearside Front Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Nearside Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Front Brake cable has a seized clevis joint pivot |3.5.1c| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassea (5.3.6 (a) (i)) | 2 |
| Offside Rear Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mount area |2.4.A.3| | 2 |
| Front Power steering pump leaking from a failed joint |2.3.3b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i)) | 2 |
| Offside Rear Direction indicator incorrect colour lens broken |1.4.A.2f| | 2 |
| passenger door does not latch securely closed rear doors |6.2.B.1a| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 2 |
| Offside Rear Braking system leaking brake drum |3.6.A.1| | 2 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush bush at rear of wishbone |2.5.A.1c| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill-box section |2.4.A.3| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 2 |
| Suspension component mounting prescribed area is excessively corroded Both rear inner sills |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting (5.3.6 (a) (i)) | 2 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 2 |
| Nearside Front Tie bar/rod locating pin insecure |2.4.G.3a| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 2 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded UNDERBODY SILL/BEHIND WHEEL ARCH |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 2 |
| Offside Rear All position lamps not working side marker |1.1.A.3b| | 2 |
| Nearside Inner Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Body has a sharp edge caused by damage quarter panel |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in two places |2.4.A.3| | 2 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 2 |
| Offside Rear Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Track rod end ball joint has excessive play Both |2.2.B.1f| | 2 |
| Nearside Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Towbar assembly inappropriately repaired |6.6.7| | 2 |
| Fuel tank insecure front tank strap (6.1.3 (a) (i)) | 2 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i)) | 2 |
| Offside Outer Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front Body has a sharp edge caused by damage wing mirror |6.1.C.1| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Position lamp has a product on the lens or light source which shows white light to the rear lens broken |4.2.3 |b| |ii|| | 2 |
| Centre Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (5.3.6 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sill (5.3.6 (a) (i)) | 2 |
| Rear Brake clevis joint has restricted free movement |3.5.1k| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded arch to floor |2.4.A.3| | 2 |
| Windscreen damaged and affecting the drivers view of an obligatory external mirror (3.2 (a) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing area |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mount |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 2 |
| Offside Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring mount |2.4.A.3| | 2 |
| Offside Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 2 |
| Offside Rear Lower Anti-roll bar locating pin retaining device missing |2.4.G.3b| | 2 |
| Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg. |6.1.B.2| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch. |6.1.B.2| | 2 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear axle |5.3.6 |a| |i|| | 2 |
| Centre Front Fuel pipe leaking |7.2.3| | 2 |
| Driving control|s| defective due to presence of items likely to interfere with the proper control of the vehicle. |6.8.2| | 2 |
| Offside Front Direction indicator not in good working order |not working| |1.5.1b| | 2 |
| Nearside Rear passenger door catch insecure |6.2.B.2| | 2 |
| Nearside Upper Hinged tailboard cannot be secured in the closed position |6.4.1| | 2 |
| Direction indicator adversely affected by the operation of another lamp nearside rear |1.4.A.2h| | 2 |
| Offside Rear Leaf spring shackle pin locking device insecurely fitted |2.4.B.3b| | 2 |
| Offside Front Electrical wiring damaged and bare wires exposed |1.9.2c| | 2 |
| Centre Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 2 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i)) | 2 |
| Driver`s airbag obviously inoperative |7.1.5 |c|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i)) | 2 |
| Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Inner Rear Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion wing panel |6.1.C.1| | 2 |
| Nearside Outer Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded upper inner arch |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sills |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills |5.3.6 |a| |i|| | 2 |
| Offside Front Body has a sharp edge caused by damage WING |6.1.C.1| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion inner wheel arch |6.1.C.1| | 2 |
| Nearside Front Body has a projection caused by corrosion step |6.1.C.1| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner/outer sills |2.4.A.3| | 2 |
| Central Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Rear Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 2 |
| Front Steering column shaft has excessive end float |2.1.3| | 2 |
| Exhaust has a part missing |6.3.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear outrigger |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front outrigger |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area corroded |7.1.1 |a| |i|| | 2 |
| Offside Front Road wheel fixing loose (5.2.1 (a) (i)) | 2 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 2 |
| Nearside Rear coil spring incomplete |2.4.C.1a| | 2 |
| Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 2 |
| Offside Front Upper Outline marker lamp not working |4.2.1 |a| |ii|| | 2 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp brake light |1.1.A.3f| | 2 |
| Nearside Service brake application uneven across the axle |3.7.D.2b| | 2 |
| Hand operated control valve control cannot be moved over its full travel |3.2.1c| | 2 |
| Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Parking brake lever, pawl mechanism pivot|s| retaining device missing |3.1.4b| | 2 |
| Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded (6.1.1 (c) (i)) | 2 |
| Offside Front Lower Torsion bar attachment bracket damaged and seriously weakened |2.4.E.4c| | 2 |
| Suspension component mounting prescribed area is inadequately repaired offside rear inner sill - fixed shackle |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is inadequately repaired nearside rear inner sill - fixed shackle |2.4.A.3| | 2 |
| Front Obligatory mirror insecure |8.1.1| | 2 |
| Rear Parking brake efficiency below requirements |1.4.2 |a| |i|| | 2 |
| Centre Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Outer Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Seat belt affected by an insecure seat fixing |5.1.B.2b| | 2 |
| Rear Parking brake lever is impeded in its travel |3.1.6c| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring |5.3.6 |a| |i|| | 2 |
| Offside Front Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Offside Rear Seat belt anchorage prescribed area is fractured cab out rigger |5.2.6| | 2 |
| Rear Upper Body insecure and dangerous to other road users |6.1.B.1b| | 2 |
| Offside Front Body has a sharp edge caused by corrosion door step |6.1.C.1| | 2 |
| Nearside Front Anti-roll bar worn and seriously weakened |2.4.G.1| | 2 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 2 |
| Front Fuel tank insecure tank strap broken |7.2.1| | 2 |
| Nearside Windscreen wiper missing (3.4 (a)) | 2 |
| Offside Rear Service brake excessively binding wheel bearing not tested (1.2.1 (f)) | 2 |
| Nearside Rear reflector obviously incorrectly positioned |1.5.1a| | 2 |
| Nearside Stop lamp obviously incorrectly positioned |1.2.1a| | 2 |
| Nearside Rear Direction indicator does not face the rear |1.4.A.2b| | 2 |
| Nearside Rear Rear position lamp|s| incorrect colour lense broken |1.1.A.3e| | 2 |
| Fuel tank insecure strap corroded and broken |7.2.1| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill holed |5.2.6| | 2 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 2 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 2 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 2 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 2 |
| Offside Front Suspension arm insecurely attached (5.3.3 (a) (i)) | 2 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Inner Ball joint has excessive play rack end |2.2.B.1f| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x2 (5.3.6 (a) (i)) | 2 |
| Exhaust emissions exceed manufacturers specified limit 0.75 limit (8.2.2.2 (a)) | 2 |
| Nearside Rear Brake lining(s) contaminated hub seal leaking (1.1.13 (b)) | 2 |
| Exhaust has a major leak of exhaust gases centre pipe |7.1.2| | 2 |
| Power steering ram|s| leaking from a failed component steering rack |2.3.3b| | 2 |
| Offside Front Radius arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Nearside Front Lower Body has a sharp edge caused by corrosion inner sill step |6.1.C.1| | 2 |
| Nearside Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush front bush |2.4.B.2| | 2 |
| Rear Fuel tank insecure strap |7.2.1| | 2 |
| Offside Driver`s seat security significantly reduced |6.5.14| | 2 |
| Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Anti-roll bar locating pin insecure |2.4.G.3a| | 2 |
| Rear Prop shaft joint so worn it is likely to fail u/j (6.1.7 (c) (ii)) | 2 |
| Centre Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 2 |
| Exhaust has a major leak of exhaust gases exhaust box |6.1.2 |a|| | 2 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced main leg (6.1.1 (d) (i)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 2 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i)) | 2 |
| Nearside Rear Direction indicator incorrect colour lense damaged |1.4.A.2f| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 2 |
| Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 2 |
| Rear Anti-roll bar modified and seriously weakened |2.4.A.2| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter |5.3.6 |a| |i|| | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis |1.1.21 |e| |i|| | 2 |
| Nearside Inner Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 2 |
| Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 2 |
| Offside Front Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 2 |
| Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 2 |
| Front Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 2 |
| Nearside Rear Tie bar/rod locating pin retaining device not properly locked |2.4.G.3b| | 2 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached loose (5.3.4 (a) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases silencers |7.1.2| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 2 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 2 |
| Offside Rear Anti-roll bar linkage insecure nut loose |2.4.G.1| | 2 |
| Obligatory mirror seriously obscured affecting the rear view both sides |8.1.2a| | 2 |
| Centre Drive shaft which forms part of the suspension distorted |2.4.G.4a| | 2 |
| Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Inner and outer sill (5.3.6 (a) (i)) | 2 |
| Offside Front Steering rack fractured and unserviceable |2.2.C.1d| | 2 |
| Offside Front Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Prop shaft bearing excessively worn rear centre bearing |6.1.7 |b| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 2 |
| Nearside Front Fuel pipe leaking |7.2.3| | 2 |
| Front Seat belt anchorage prescribed area is fractured |5.2.6| | 2 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Rear Stop lamp obviously incorrectly positioned |1.2.1a| | 2 |
| Nearside Outer Front Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 2 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 2 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting chassis |2.4.A.3| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 2 |
| Nearside Rear Body insecure and dangerous to other road users mudguard |6.1.B.1b| | 2 |
| Brake cable damaged |1.1.15 |a|| | 2 |
| Prop shaft bearing excessively worn both centre bearings (6.1.7 (b) (i)) | 2 |
| Driver`s seat insecure bolt missing |6.2.A.1| | 2 |
| Rear Lower passenger door does not latch securely closed |6.2.B.1a| | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER WING (5.3.6 (a) (ii)) | 2 |
| Offside Inner Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Lower Torsion bar insecure at an end fixing |2.4.E.2| | 2 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Front Front suspension locking device missing |2.5.A.4| | 2 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected lens broken (4.5.1 (b) (ii)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 2 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under and outer sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Lower Power steering pipe|s| or hose|s| leaking |2.3.3b| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 2 |
| Fuel tank insecure Tank strap corroded |7.2.1| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 2 |
| Offside Inner Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mount area |2.4.A.3| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill by spring mounting |2.4.A.3| | 2 |
| Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 2 |
| Centre Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 2 |
| Offside Front Body has a projection caused by damage wing loose |6.1.C.1| | 2 |
| Nearside Rear Lower All position lamps not working |1.1.A.3b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH |2.4.G.2| | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step |6.1.B.2| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step |6.1.B.2| | 2 |
| Front coil spring broken both |2.4.C.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked |5.3.6 |a| |i|| | 2 |
| Steering column damaged and unserviceable |2.2.C.1d| | 2 |
| Front Steering pivot point has excessive play |2.2.B.1g| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/inner sill |5.2.6| | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to rear (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in 2 places |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded middle chassis |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Nearside Outer Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Headlamp aim beam image too far to the right |1.6.4| | 2 |
| Offside Headlamp aim beam image too far to the right |1.6.4| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 2 |
| Front Position lamp not working x2 (4.2.1 (a) (ii)) | 2 |
| Rear Position lamp not working x2 (4.2.1 (a) (ii)) | 2 |
| Offside Drag link end ball pin shank loose |2.2.B.1c| | 2 |
| Nearside Front Headlamp extinguishes when tapped lightly by hand |1.2.4c| | 2 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 2 |
| Towbar component excessively damaged |6.1.6 |a|| | 2 |
| Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 2 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door shut (7.1.1 (a) (i)) | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 2 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 2 |
| Prop shaft securing bolt missing |6.1.7 |a| |i|| | 2 |
| Fuel cap/sealing device missing key |7.2.4a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded cross member |2.4.A.3| | 2 |
| Offside front brake juddering severely |3.8.A.2b| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger area |2.4.A.3| | 2 |
| Nearside Other passenger door cannot be opened from outside the vehicle Sliding door (6.2.3 (a)) | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 2 |
| Offside Rear Direction indicators missing |1.4.A.2b| | 2 |
| Anti-lock braking system warning lamp sequence is incorrect |3.4.1c| | 2 |
| Centre Upper Stop lamp not working |1.2.1b| | 2 |
| Suspension component mounting prescribed area is excessively corroded both front inner wheel arches |2.4.A.3| | 2 |
| Offside Service brake application uneven across the axle |3.7.D.2b| | 2 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone rear bush (5.3.4 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step panel |5.2.6| | 2 |
| Nearside Rear Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 2 |
| Nearside Inner Steering arm has relative movement at its fixings |2.2.B.1h| | 2 |
| Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at hanger |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at hanger |2.4.A.3| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring (5.3.6 (a) (i)) | 2 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 2 |
| Nearside Outer Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis, marked yellow |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member, marked yellow |2.4.A.3| | 2 |
| Inner Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Front Road wheel more than one fixing missing |5.2.1 |a| |ii|| | 2 |
| Direction indicators not working all |1.4.A.2c| | 2 |
| Nearside Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 2 |
| Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 2 |
| Nearside Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 2 |
| Offside Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 2 |
| Nearside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill panel |2.4.A.3| | 2 |
| Nearside Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached |6.1.6 |i| |ii|| | 2 |
| Offside Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached |6.1.6 |i| |ii|| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step |5.3.6 |a| |i|| | 2 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 2 |
| Nearside Rear Leaf spring fractured front spring eye (5.3.1 (b) (i)) | 2 |
| Front Exhaust silencer insecure |8.1.1 |b| |i|| | 2 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 2 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sills |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 2 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Nearside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 2 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 2 |
| Nearside Outer Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 2 |
| Electrical wiring insecure towbar |1.9.2a| | 2 |
| Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill after wheel (5.3.6 (a) (i)) | 2 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i)) | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded under car sill as marked |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded under car sill as marked |2.4.A.3| | 2 |
| Nearside Rear Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 2 |
| Nearside Outer Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 2 |
| Offside Outer Seat belt locking mechanism does not secure or release |5.1.B.6a| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to floor (6.2.2 (d) (i)) | 2 |
| Offside Outer Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Nearside Front Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 2 |
| Offside Front Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 2 |
| Nearside Rear Inner Valve stem seriously damaged |4.1.D.1e| | 2 |
| Nearside Outer Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i)) | 2 |
| Offside Rear Body component damaged and likely to cause injury light lens |6.2.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded bump stop area |2.4.A.3| | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Offside Front Seat belt adjustment fitting fractured |5.2.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 2 |
| Nearside Lower Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 2 |
| Outer Front Horn not working |1.6.2a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mounting |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mounting |2.4.A.3| | 2 |
| Offside Outer Rear All position lamps not working |1.1.A.3b| | 2 |
| Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 2 |
| Centre Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearmost |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearmost |2.4.A.3| | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion inner arch |6.1.C.1| | 2 |
| Offside Front Electrical wiring damaged, likely to cause a short |1.9.2b| | 2 |
| Nearside Rear Brake prescribed area is excessively corroded (1.1.21 (e) (i)) | 2 |
| Nearside Front Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D |2.4.G.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/inner arch |2.4.A.3| | 2 |
| Brake master cylinder fluid level dangerously low |3.6.C.1e| | 2 |
| Offside Seat belt flexible stalk excessively deteriorated |5.1.B.5a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in arch |2.4.A.3| | 2 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch/strut top |2.4.A.3| | 2 |
| Offside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 2 |
| Nearside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 2 |
| Indicator switch not able to be operated from the normal driving position |1.4.A.1| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area holed (5.3.6 (a) (i)) | 2 |
| Offside Front Lower Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 2 |
| Offside Rear Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind rear wheel |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 2 |
| Offside Front Brake disc insecure |1.1.14 |a| |ii|| | 2 |
| Offside Rear Direction indicator has a product on the light source so it is not visible from a reasonable distance |1.4.A.2e| | 2 |
| Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Front Position lamp not working both |4.2.1 |a| |ii|| | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush. (5.3.4 (a) (i)) | 2 |
| Nearside Direction indicator not working side repeater |4.4.1 |a| |ii|| | 2 |
| Nearside Inner Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Brake hose inappropriately repaired |3.6.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded center inner sill |5.2.6| | 2 |
| Nearside Front passenger door hinge insecure |6.2.B.2| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mount |2.4.A.3| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring mount |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear spring mount |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear spring mount |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded STEP AREA |5.2.6| | 2 |
| Offside Rear Statutory seat belt missing buckle |5.1.1| | 2 |
| Rear Exhaust has a part missing |6.3.1a| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 2 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member (6.1.1 (c) (i)) | 2 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Front Suspension arm has excessive play in a pin/bush Rear Bush |2.4.G.2| | 2 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 2 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn front bush (5.3.4 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush d bush |2.4.G.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 2 |
| All outline marker lamps not working all (4.2.1 (a) (ii)) | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 2 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Axle swivel joint has excessive play |2.5.A.3b| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion wing area |6.1.C.1| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at sill |2.4.A.3| | 2 |
| Offside Side repeater missing |1.5.1a| | 2 |
| Offside Front Seat belt locking mechanism does not secure or release |5.1.B.6a| | 2 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Sill |2.4.A.3| | 2 |
| Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 2 |
| Exhaust fumes entering cabin (6.1.2 (b) (i)) | 2 |
| Centre Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 2 |
| Nearside Front passenger door catch insecure |6.2.B.2| | 2 |
| Nearside Track rod end excessively corroded and unserviceable |2.2.C.1d| | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Rear Upper Suspension component mounting prescribed area is fractured |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear quarter |2.4.A.3| | 2 |
| Nearside Front Suspension arm locating pin locking device missing |2.4.G.3b| | 2 |
| Nearside Front Cab steps so insecure it is likely to cause injury Inner step |6.2.8 |a| |ii|| | 2 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear spring eye bush |2.4.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger area |6.1.B.2| | 2 |
| Nearside Rear Lower Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Lower Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat mounting |5.2.6| | 2 |
| Offside Inner Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Front Sub-frame cracked |2.4.G.1| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill |6.1.B.2| | 2 |
| Offside Rear position lamp|s| not working marker |1.1.A.3b| | 2 |
| Nearside Front Upper Front position lamp|s| insecure |1.1.A.3a| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 2 |
| Offside Outer Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section behind spring hanger |5.3.6 |a| |i|| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 2 |
| Offside Rear Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Outer Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 2 |
| Nearside Rear Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 2 |
| Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Headlamp levelling device inoperative both |4.1.5 |a|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wing |5.3.6 |a| |i|| | 2 |
| Offside Front obligatory indirect vision device seriously damaged affecting the rear view |8.1.2a| | 2 |
| Offside Front Lower Body insecure and dangerous to other road users |6.1.B.1b| | 2 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Offside Rear Inner Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber area |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded o/s front inner wing holed |2.4.A.3| | 2 |
| Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt o/s (6.1.7 (g) (ii)) | 2 |
| Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt n/s (6.1.7 (g) (ii)) | 2 |
| Offside Front Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 2 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring mount |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers door step |6.1.B.2| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under passenger seat |6.1.B.2| | 2 |
| Centre Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out-rigger area |2.4.A.3| | 2 |
| Anti-roll bar insecure |2.4.G.1| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Braking system leaking Load sensing valve |3.6.A.1| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded 1/4 panel |2.4.A.3| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 2 |
| Nearside Steering retaining device insecure |2.2.C.1g| | 2 |
| Rear Service brake effort inadequate at a wheel both sides (1.2.1 (a) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 2 |
| Nearside Rear Lower Anti-roll bar locating pin retaining device not properly locked |2.4.G.3b| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis in 2 places |2.4.A.3| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Nearside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outrigger |6.1.1 |a| |i|| | 2 |
| Nearside Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Rear Steering rack gaiter split |2.2.D.2d| | 2 |
| Nearside Seat belt retracting mechanism defective |5.1.B.6b| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill in several places |5.2.6| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch in several places |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger mount |5.3.6 |a| |i|| | 2 |
| Central Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement lower arm rear bush |2.4.G.2| | 2 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded INNER SILL SILL STEP AREA UNDERSIDE |5.2.6| | 2 |
| Nearside Front Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Offside Rear Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mounting |6.1.B.2| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 2 |
| Offside Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt refit |2.1.3 |g| |ii|| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner arch holed |5.2.6| | 2 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D Bush |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D Bush |2.4.G.2| | 2 |
| Nearside Rear Lower Anti-roll bar linkage insecure bolt loose |2.4.G.1| | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside front inner wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension arm pin or bush excessively worn rear most (5.3.4 (a) (i)) | 2 |
| Nearside All position lamps not working centre |1.1.A.3b| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 2 |
| Offside Rear Brake lining|s| insecure |3.5.1g| | 2 |
| Offside Rear Inner Valve stem seriously damaged |4.1.D.1e| | 2 |
| Inner Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch/floor |6.1.B.2| | 2 |
| Suspension component mounting prescribed area is excessively corroded offside out rigger |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded offside rear out rigger |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded nearside rear out rigger |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded nearside inner sill |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded nearside out rigger |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded nearside inner step |2.4.A.3| | 2 |
| Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 2 |
| Brake pipe inadequately supported front to rear pipes |3.6.B.1| | 2 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.3| | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.3| | 2 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.3| | 2 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired seized |1.1.17 |a|| | 2 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Nearside Rear Lower Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear fog lamp emits a light other than red |1.1.6a| | 2 |
| Fuel tank insecure front strap snapped |7.2.1| | 2 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Offside Rear Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Inner Front Ball joint ball pin shank loose |2.2.B.1c| | 2 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch marked in yellow |6.1.B.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Front Headlamp not working on dipped beam |1.2.4a| | 2 |
| Centre Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill. (5.3.6 (a) (i)) | 2 |
| Seat belt locking mechanism does not secure or release |5.1.B.6a| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 2 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing area |6.1.B.2| | 2 |
| Offside Front brake caliper locking device missing |3.5.1l| | 2 |
| Nearside Rear Vehicle structure chassis cross member corroded |6.1.2| | 2 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear |2.5.A.1c| | 2 |
| Offside Front Radius arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Rear Prop shaft securing bolt missing |6.1.7 |a| |i|| | 2 |
| Rear Body has a sharp edge caused by corrosion Bumper |6.1.C.1| | 2 |
| Offside Windscreen wiper blade missing |3.4 |b| |ii|| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger |2.4.A.3| | 2 |
| Nearside Outer Front Anti-roll bar linkage severely distorted |2.4.G.1| | 2 |
| Rear Trailer electrical socket deteriorated so that lead cannot be securely connected |1.9.3b| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill / step area |5.2.6| | 2 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Front Lower Suspension arm ball joint excessively worn both |5.3.4 |a| |i|| | 2 |
| Parking brake lever ratchet mechanism worn to the extent that the brake may inadvertently release |1.1.6 |b| |ii|| | 2 |
| Nearside Front Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Rear Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii)) | 2 |
| front brakes release unevenly o/s |3.7.B.4| | 2 |
| Rear Service brake lagging in operation both (1.2.1 (d)) | 2 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 2 |
| Centre Rear Statutory seat belt missing |5.1.A.1| | 2 |
| Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |6.1.1c| | 2 |
| Nearside Rear Outline marker lamp not working |4.2.1 |a| |ii|| | 2 |
| Front Exhaust mounting missing |6.3.1b| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing/floor |2.4.A.3| | 2 |
| Offside Front Body panel corroded and likely to cause injury WING |6.2.1 |a| |i|| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch |6.1.B.2| | 2 |
| Offside Front Tie bar/rod attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Offside Rear Lower Tie bar/rod locating pin insecure |2.4.G.3a| | 2 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view sharp edges |8.1.2a| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep and inner sill |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 2 |
| Centre Front Seat belt affected by an insecure seat fixing |5.2.1b| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill |6.1.B.2| | 2 |
| Offside Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Nearside Front Suspension arm pin or bush excessively worn lower rear bush (5.3.4 (a) (i)) | 2 |
| Offside Front Suspension arm pin or bush excessively worn lower rear bush (5.3.4 (a) (i)) | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis above leaf spring |2.4.A.3| | 2 |
| Front Fuel tank insecure tank strap |7.2.1| | 2 |
| Offside Outer Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Nearside Front Suspension arm locating pin retaining device missing |2.4.G.3b| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear. |2.4.A.3| | 2 |
| Nearside Brake cable locking device missing |3.5.1l| | 2 |
| Nearside Rear Brake hose excessively damaged |1.1.12 |b| |ii|| | 2 |
| Offside Rear Lower Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Fuel hose leaking |7.2.3| | 2 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill. |5.2.6| | 2 |
| Brake performance not tested Unable to complete brake test. (1.2.1 (g)) | 2 |
| Rear Anti-roll bar which is adjustable, loose in adjustment threads |2.4.G.1| | 2 |
| Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger |5.3.6 |a| |i|| | 2 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 2 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired step |2.4.A.3| | 2 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp and nearside |1.1.A.3f| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step |7.1.1 |a| |i|| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch/inner wing |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and floor |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front mount area |2.4.A.3| | 2 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded Under Inner Sill |2.4.A.3| | 2 |
| Centre Front Lower Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing holed |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corner |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded at step |5.2.6| | 2 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Nearside Rear Brake cable locking device insecure |3.5.1j| | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D block |5.3.4 |a| |i|| | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn D block |5.3.4 |a| |i|| | 2 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 2 |
| Nearside Rear Upper Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Lower Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 2 |
| Brake performance not tested Would Not Proceed With Brake Test Due To Inoperative N/S/R Service Brake (1.2.1 (g)) | 2 |
| Nearside Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring |2.4.A.3| | 2 |
| Nearside Front Lower Radius arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed |2.4.A.3| | 2 |
| Offside Front Suspension arm severely distorted |2.4.G.1| | 2 |
| Nearside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt track rod end |2.4.G.2| | 2 |
| Exhaust emits visible black smoke at idle (8.2.1.2 (f)) | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 2 |
| Nearside Inner Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
| Offside Inner Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
| Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity |4.2.3 |b| |ii|| | 2 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting crossmember |6.1.6 |i| |i|| | 2 |
| Offside Rear Lower Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Front position lamp|s| not working N/S/F |1.1.A.3b| | 2 |
| Centre engine mounting bracket insecure and likely to fail |6.1.D.1b| | 2 |
| Nearside Rear Panhard rod has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting area |2.4.A.3| | 2 |
| Nearside Rear Rear position lamp|s| does not face the rear |1.1.A.3a| | 2 |
| Central Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Centre Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 2 |
| Offside Front Lower Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear |2.4.A.3| | 2 |
| Exhaust emissions exceed manufacturer`s specified limit Plate limit 0.75 1/m |8.2.2.2 |a|| | 2 |
| Nearside Brake drum contaminated |1.1.14 |b|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch 3 areas |2.4.A.3| | 2 |
| Nearside Rear Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/box at |5.3.6 |a| |i|| | 2 |
| Offside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i)) | 2 |
| Nearside Front Stop lamp emits other than a steady red light |1.2.1e| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis rail |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underbody Sill |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 2 |
| Nearside Emergency exit sign illegible |6.2.D.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to chassis member |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to chassis member |5.3.6 |a| |i|| | 2 |
| Central Prop shaft bearing housing fractured (6.1.7 (f) (i)) | 2 |
| Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 2 |
| Rear Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
| Nearside Rear Braking system leaking hub |3.6.A.1| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i)) | 2 |
| Front Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SPRING HANGER |6.1.B.2| | 2 |
| Offside Front Suspension arm pin or bush excessively worn back bush (5.3.4 (a) (i)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside inner sills |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded panel behind front wheel |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner step |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing holed |2.4.A.3| | 2 |
| Offside Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Offside Outer Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger (5.3.6 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger (5.3.6 (a) (ii)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 2 |
| Offside Rear Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 2 |
| Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Supplementary restraint system warning lamp indicates a fault air bag light on (7.1.6 (a)) | 2 |
| Centre Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone |2.4.G.2| | 2 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting central |6.2.2 |d| |i|| | 2 |
| Brake warning device if visual, not visible from the driving seat |3.3.E.2a| | 2 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Rear passenger door catch missing |6.2.B.2| | 2 |
| Rear Anti-roll bar pin or bush excessively worn d bushes |5.3.4 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floorpan |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floorpan |2.4.A.3| | 2 |
| Centre Rear Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Nearside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Centre Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 2 |
| Nearside Rear Lower Rear position lamp|s| incomplete |1.1.4a| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing/wheel arch |2.4.A.3| | 2 |
| Rear Electrical wiring damaged, likely to become detached |1.9.2b| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in arch |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi / inner arch |2.4.A.3| | 2 |
| Nearside Rear Brake valve leaking |1.1.7 |d| |i|| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 2 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked |7.1.1 |a| |i|| | 2 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 2 |
| Power steering component leaking power steering rack leaking (2.1.5 (a)) | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 2 |
| Nearside Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor to inner wheel arch |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to inner wheel arch |2.4.A.3| | 2 |
| Offside Stop lamp does not face the rear |1.2.1a| | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch (5.3.6 (a) (i)) | 2 |
| Prop shaft securing bolt missing by front prop shaft bearing (6.1.7 (a) (i)) | 2 |
| Central Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis cross member |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 2 |
| Nearside Parking brake not fitted on at least two wheels |3.1.1| | 2 |
| Steering rack has excessive free play detected at the steering wheel |steering rack fitted| O/S rack end joint play |2.3 |a| |i|| | 2 |
| Driver`s seat insecure Corrosion on drivers door step and step supports |6.2.5 |a| |ii|| | 2 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill forward of N/S rear spring front hanger |6.2.2 |d| |i|| | 2 |
| Seat belt likely to become detached in the event of a collision Inner sill under passenger side step |7.1.1 |a| |ii|| | 2 |
| Offside Front Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 2 |
| Offside Rear Vehicle structure chassis cross member corroded |6.1.2| | 2 |
| Rear Stop lamp not working X2 |1.2.1b| | 2 |
| Brake hydraulic reservoir cap missing |1.1.10 |e|| | 2 |
| Nearside Front Body has a sharp edge caused by damage headlamp |6.1.C.1| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under step sill |2.4.A.3| | 2 |
| Nearside Front brake caliper modified and seriously weakened |3.5.1n| | 2 |
| Nearside Front Upper Ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to step (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch x 2 |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step |7.1.1 |a| |i|| | 2 |
| Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Rear Lower Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind wheel |5.3.6 |a| |i|| | 2 |
| Rear Other passenger door does not latch securely closed |6.2.3 |a|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple places (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple places (5.3.6 (a) (i)) | 2 |
| Front position lamp|s| not working o/s and n/s |1.1.A.3b| | 2 |
| Rear Direction indicator not working both (4.4.1 (a) (ii)) | 2 |
| Nearside Front Trailing arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Body component damaged and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTRIGGER |6.1.B.2| | 2 |
| Nearside Front Lower Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Position lamp likely to become detached |4.2.1 |c| |ii|| | 2 |
| Offside Rear Upper Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Nearside Suspension arm ball joint dust cover missing |2.4.G.2| | 2 |
| Offside Anti-roll bar linkage fractured |2.4.G.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/floor |2.4.A.3| | 2 |
| Front Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 2 |
| Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/chassis |2.4.A.3| | 2 |
| Nearside Rear Leaf spring eye defective |anchor| broken |2.4.B.1b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 2 |
| Nearside Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front Inner Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
| Offside Rear Lower Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner quarter |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing to floor |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear |2.4.A.3| | 2 |
| Nearside Rear Body component corroded and likely to cause injury body (6.2.1 (a) (i)) | 2 |
| Offside Rear Body component corroded and likely to cause injury body (6.2.1 (a) (i)) | 2 |
| Leaf spring fitted in such a way that the axle is misaligned |2.4.B.1e| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor of cab (7.1.1 (a) (i)) | 2 |
| Fuel tank insecure front support strap broken |7.2.1| | 2 |
| Rear Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 2 |
| Fuel tank leaking (6.1.3 (b) (i)) | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 2 |
| Retractable step not operating correctly |6.1.E.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount |5.3.6 |a| |i|| | 2 |
| Offside Rear Upper Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 2 |
| Front Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sills |5.2.6| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sills |5.2.6| | 2 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Offside Power steering component|s| leaking from a failed seal |2.3.3b| | 2 |
| Front Driver`s door does not latch securely closed |6.2.B.1a| | 2 |
| Brake lever locking device missing |3.5.1l| | 2 |
| Brake valve retaining device insecure |3.6.A.2d| | 2 |
| Nearside Outline marker lamp not working |4.2.1 |a| |ii|| | 2 |
| Position lamp not working off and nearside rear (4.2.1 (a) (ii)) | 2 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet (5.3.6 (a) (i)) | 2 |
| Offside Suspension arm inappropriately repaired |2.4.A.2| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 2 |
| Emissions not tested black smoke |7.3.A.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 2 |
| Offside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Offside Hazard warning lamps inoperative front and rear |1.4.B.1b| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded corner, marked yellow |2.4.A.3| | 2 |
| Nearside Inner Rear Valve stem seriously misaligned |4.1.D.1e| | 2 |
| Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 2 |
| Front Bonnet retaining device insecure |8.4.2| | 2 |
| Offside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 2 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended rear bush |2.4.F.3| | 2 |
| Offside Front Upper brake caliper securing device missing |3.5.1j| | 2 |
| Centre Rear Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 2 |
| Offside Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab |7.1.1 |a| |i|| | 2 |
| Centre Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Fluid leak harmful to the environment or a risk to other road users diesel |8.4.1 |a| |i|| | 2 |
| Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear floor |2.4.A.3| | 2 |
| Rear Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 2 |
| Centre Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting |2.4.A.3| | 2 |
| Nearside Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill |5.3.6 |a| |i|| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Subframe mounting area (front) corroded/holed (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner chassis leg at engine subframe mounting area. Welding repair cracked/corroded and holed. (6.1.1 (c) (i)) | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg corroded at engine subframe mounting area (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg corroded at engine subframe mounting area (6.1.1 (c) (i)) | 2 |
| Steering locking device ineffective (2.1.3 (d)) | 2 |
| Nearside Outer Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 2 |
| Fuel tank insecure rear tank strap (6.1.3 (a) (i)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan |6.1.1 |c| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section behind spring hanger |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 2 |
| Offside Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 2 |
| Nearside Outer Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Outer Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 2 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar locating pin incorrectly positioned |2.4.G.3a| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor |5.3.6 |a| |i|| | 2 |
| Nearside Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 2 |
| Nearside Rear Body insecure and dangerous to other road users bumper |6.1.B.1b| | 2 |
| Nearside Rear rear brake recording little or no effort |3.8.A.4a| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 2 |
| Rear Stop lamp not working both side |1.2.1b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill marked yellow (5.3.6 (a) (i)) | 2 |
| Nearside Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring |5.3.6 |a| |i|| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mount |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded in engine bay |2.4.A.3| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill, step |6.1.1 |c| |i|| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill, step |6.1.1 |c| |i|| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/arch |6.1.1 |c| |i|| | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 2 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet |5.3.6 |a| |i|| | 2 |
| Nearside Rear Upper Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 2 |
| Nearside Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 2 |
| Nearside Rear Rear fog lamp tell tale not working |1.3.1b| | 2 |
| Offside Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
| Nearside Outer Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Offside Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded corner |2.4.A.3| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded corner |2.4.A.3| | 2 |
| Nearside Rear brake drum contaminated by grease |3.5.1h| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by fuel tank |6.1.B.2| | 2 |
| Nearside Rear Other passenger door hinge insecure |6.2.3 |c| |ii|| | 2 |
| Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 2 |
| Offside Inner Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded valence |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valence |2.4.A.3| | 2 |
| Offside Front Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step |7.1.1 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 2 |
| Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Centre Rear Seat belt flexible stalk cable has broken strands |5.2.4b| | 2 |
| Offside Front Upper All outline marker lamps not working (4.2.1 (a) (ii)) | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre |2.4.A.3| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded o/s/f inner wheel arch |2.4.A.3| | 2 |
| Speedometer clearly inoperative speedo moving with revs not speed (7.8 (b) (ii)) | 2 |
| Seat belt webbing significantly weakened drivers (7.1.2 (b) (ii)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to arch |6.1.B.2| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under step |6.2.2 |d| |i|| | 2 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
| Emissions not tested too smokey (8.2.2.2 (e)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.1 |c| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x4 |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 |5.3.6 |a| |i|| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under body sill (6.1.1 (c) (i)) | 2 |
| Nearside Front Lower Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 2 |
| Rear Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Road wheel fixing loose (5.2.1 (a) (i)) | 2 |
| Nearside Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Upper Front position lamp|s| not working marker |1.1.A.3b| | 2 |
| Nearside Suspension component ball joint dust cover no longer prevents the ingress of dirt lower ball joint cover |5.3.4 |b| |ii|| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 2 |
| Offside Front Wheel bearing rough when rotated and play |5.1.3 |b| |i|| | 2 |
| Offside Front Upper Power steering pump leaking from a failed component |2.3.3b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 2 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member |6.1.1 |c| |i|| | 2 |
| Nearside Front Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 2 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded SHOCK ABSORBER |2.4.A.3| | 2 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf mount |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf mount |2.4.A.3| | 2 |
| Offside Front Outline marker lamp lens seriously defective (4.2.1 (b)) | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and inner sill |6.1.B.2| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 2 |
| Offside Front Anti-roll bar fractured (5.3.3 (b) (ii)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (5.3.6 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis marked in yellow |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing panel |2.4.A.3| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Steering locking device missing |2.2.C.1g| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep (6.1.1 (c) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 2 |
| Offside Rear All direction indicators incorrect colour (4.4.3 (a)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mounting |2.4.A.3| | 2 |
| Offside Side repeater obviously incorrectly positioned |1.4.A.2b| | 2 |
| Front Track rod end ball joint has excessive play both sides (2.1.3 (b) (i)) | 2 |
| Anti-lock braking system component missing |3.4.2| | 2 |
| Offside Front Road wheel fixing missing nut missing |5.2.1 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Suspension spring mounting prescribed area is excessively corroded both rear |2.4.A.3| | 2 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 2 |
| Front Oil leaking excessively from engine |8.4.1 |a| |i|| | 2 |
| Rear Stop lamp(s) adversely affected by the operation of another lamp both sides (4.3.3 (b)) | 2 |
| Front brake disc contaminated by brake fluid |3.5.1h| | 2 |
| Offside Drivers seat insecure (6.2.5 (a) (ii)) | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 2 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 2 |
| Offside Body has a sharp edge caused by damage MIRROR |6.1.C.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch |6.1.1 |c| |i|| | 2 |
| Nearside Front Side repeater incorrect colour |4.4.3 |a|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by spring hanger |2.4.A.3| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strut top (5.3.6 (a) (ii)) | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strut top (5.3.6 (a) (ii)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wing |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 2 |
| Nearside Front Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i)) | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 2 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg as marked (5.3.6 (a) (i)) | 2 |
| Rear Anti-roll bar linkage ball joint excessively worn both (5.3.4 (a) (i)) | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 2 |
| Nearside Front Inner Steering linkage ball joint has excessive play tie bar |2.1.3 |b| |i|| | 2 |
| Brake pipe inadequately supported under bonnet |3.6.B.1| | 2 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hanger |2.4.A.3| | 2 |
| Exhaust emits excessive smoke or vapour of any colour |7.4.B.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring |5.3.6 |a| |i|| | 2 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d-bush |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d-bush |2.4.G.2| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded mid inner sill |2.4.A.3| | 2 |
| Centre Vehicle structure has excessive corrosion which adversely affects braking or steering x member |6.1.A.1| | 2 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
| Upper Power steering ram|s| leaking from a failed seal |2.3.3b| | 2 |
| Offside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Fuel tank insecure rear strap |7.2.1| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 2 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides by rear leaf spring mount area |2.4.A.3| | 2 |
| Centre Rear Towbar retaining device missing |6.6.3a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chasis |2.4.A.3| | 2 |
| Offside Front Coil spring insecure (5.3.1 (a) (i)) | 2 |
| Offside Body has a sharp edge caused by corrosion front wing |6.1.C.1| | 2 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in front of rear spring |2.4.A.3| | 2 |
| Rear Service brake excessively binding |1.2.1 |f|| | 2 |
| Nearside Rear Leaf spring fractured front spring eye |2.4.B.1a| | 2 |
| Offside Inner Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foot step |6.1.B.2| | 2 |
| Offside Front Macpherson strut severely distorted |2.4.G.1| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover missing |2.4.G.2| | 2 |
| Offside Rear Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Fuel tank insecure straps corroded (6.1.3 (a) (i)) | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ARCH (6.1.1 (c) (i)) | 2 |
| Front Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 2 |
| Nearside Rear Parking brake lever is impeded in its travel |3.1.6c| | 2 |
| Brake pipe inadequately supported front to rears |3.6.B.1| | 2 |
| Offside Front Electrical wiring insecure and connectors likely to become disconnected |4.11 |a| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 |5.3.6 |a| |i|| | 2 |
| Inner Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.1 |c| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner panel |2.4.A.3| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to sill |6.2.2 |d| |i|| | 2 |
| Offside Seat belt buckle not functioning as intended (7.1.2 (d)) | 2 |
| Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 2 |
| Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 2 |
| Nearside Entrance/exit door ???door open` warning device inoperative |6.2.C.3| | 2 |
| Nearside Outer Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
| Offside Outer Front Obligatory mirror missing |8.1.1| | 2 |
| Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Rear fog lamp does not emit a steady red light |1.3.2e| | 2 |
| Offside Front All position lamps not in good working order |function impaired| |1.1.A.2a| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded corner |2.4.A.3| | 2 |
| Nearside Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 2 |
| Front Headlamp insecure |1.7.3| | 2 |
| Centre Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Upper Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing under wing |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired cross member |2.4.A.3| | 2 |
| Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Steering arm has relative movement at its fixings rack end |2.2.B.1h| | 2 |
| Offside Front Steering arm has relative movement at its fixings rack end |2.2.B.1h| | 2 |
| Nearside Rear Coil spring mounting loose |2.4.C.3a| | 2 |
| Offside Driver`s door cannot be opened from inside the vehicle |6.2.3 |a|| | 2 |
| Nearside Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Power steering pipe|s| or hose|s| leaking from a joint rack |2.3.3b| | 2 |
| Centre Front Exhaust mounting missing |7.1.1b| | 2 |
| Nearside Front Road wheel fixing loose |5.2.1 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger |2.4.A.3| | 2 |
| Nearside Body component corroded and likely to cause injury N/S SLIDING DOOR SILL CORRODED |6.2.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch floor (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 2 |
| Central Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting x member 1st one in front of the axle (6.2.2 (d) (i)) | 2 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 2 |
| Offside Outer Ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis box |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by spring hanger |2.4.A.3| | 2 |
| Offside Rear Brake pipe inappropriately repaired |3.6.A.3| | 2 |
| Offside Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Outer Front Front constant velocity joint is excessively worn |2.5.C.1b| | 2 |
| Offside Front Outer Body has a sharp edge caused by corrosion WING |6.1.C.1| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep under sill |5.2.6| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Rear All outline marker lamps missing (4.2.1 (a) (ii)) | 2 |
| Nearside Rear All outline marker lamps missing (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/floor |2.4.A.3| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and step (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill and wheel arch |2.4.A.3| | 2 |
| Front position lamp|s| not working x2 |1.1.A.3b| | 2 |
| Nearside Inner Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most outrigger |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis above rear axle |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis above rear axle |2.4.A.3| | 2 |
| Offside Rear position lamp|s| not working tail light |1.1.A.3b| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under wheel arch |5.3.6 |a| |i|| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is severely distorted |5.2.6| | 2 |
| Nearside Front Front position lamp|s| not working main beam |1.1.A.3b| | 2 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 2 |
| Offside Rear Seat belt attachment fitting badly deteriorated |5.1.B.4| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush. |2.4.G.2| | 2 |
| Offside Stop lamp emits other than a steady red light lens broken |1.2.1e| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing |3.6.C.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount area (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i)) | 2 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing |7.1.2| | 2 |
| Offside Driver`s door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 2 |
| Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 2 |
| Centre Rear Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Spare wheel carrier insecure |6.4.2| | 2 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor |5.3.6 |a| |i|| | 2 |
| Nearside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering innerwing (6.1.1 (c) (ii)) | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear sill |2.4.A.3| | 2 |
| Rear fog lamp has a product on the lens so it is not visible from a reasonable distance |1.3.2d| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step area |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step area |2.4.A.3| | 2 |
| Centre Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 2 |
| Lower Stop lamp not working |1.2.1b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner sill |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under arch (5.3.6 (a) (i)) | 2 |
| Headlamp light intensity severely reduced both (4.1.4 (a)) | 2 |
| Nearside Outer Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step and sill |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 2 |
| Offside Rear Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under foot step |6.1.B.2| | 2 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked |6.1.1 |c| |i|| | 2 |
| Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/inner sill |5.2.6| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to floor |2.4.A.3| | 2 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 2 |
| Nearside Driver`s view restricted by object |6.9.1a| | 2 |
| Offside Front Seat belt affected by an insecure seat fixing |5.1.B.2b| | 2 |
| Nearside Front Lower Bonded suspension unit bonding failed and part of the unit is likely to become displaced |2.4.F.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outrigger |6.6.6| | 2 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis |2.2.C.1h| | 2 |
| Rear Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 2 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step area |5.3.6 |a| |i|| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 2 |
| Nearside Front Horn control missing |1.6.1| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back |5.3.6 |a| |i|| | 2 |
| Offside Front Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 2 |
| Central Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Offside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 2 |
| Offside All position lamps not working sidemarker |1.1.A.3b| | 2 |
| Front Headlamp not working on main beam both (4.1.1 (a) (ii)) | 2 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer step |5.2.6| | 2 |
| Offside Rear Lower Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step area |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step corroded (7.1.1 (a) (i)) | 2 |
| Offside Headlamp not working on dipped beam aim to be checked |1.7.5a| | 2 |
| Rear Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 2 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 2 |
| Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
| Rear Emergency exit door cannot be opened from inside the vehicle |9.1.2 |a|| | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near fuel tank |6.1.1 |c| |i|| | 2 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii)) | 2 |
| Rear Anti-roll bar pin or bush excessively worn d-bushes both sides (5.3.4 (a) (i)) | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sil |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mount |2.4.A.3| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 2 |
| Nearside Rear Seat belt not functioning as intended |7.1.2 |c|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch/inner wing |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill back |5.3.6 |a| |i|| | 2 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` magic tree |8.3.1b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by leaf spring |5.3.6 |a| |i|| | 2 |
| Parking brake lever is located so that it cannot be satisfactorily operated from the driver`s seat |3.1.3c| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Front Brake valve leaking |3.6.A.1| | 2 |
| Nearside Front Lower All position lamps not working |1.1.A.3b| | 2 |
| Nearside Seat belt buckle not functioning as intended |7.1.2 |d|| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear spring rear mounting |2.4.A.3| | 2 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear spring rear mounting |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis x 2 |2.4.A.3| | 2 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength outer sill |2.4.A.3| | 2 |
| Nearside Rear Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 2 |
| Nearside Outer Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Outer Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floor |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floor |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front spring mounting |5.3.6 |a| |i|| | 2 |
| Emissions not tested too much black smoke |7.3.A.1| | 2 |
| Nearside Body has a projection caused by damage wing mirror |6.1.C.1| | 2 |
| Suspension spring mounting prescribed area is excessively corroded offside rear inner sill |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear inner sill |2.4.A.3| | 2 |
| Offside Rear Leaf spring anchor pin or bush likely to become detached |5.3.4 |a| |ii|| | 2 |
| Nearside coil spring broken |2.4.C.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 2 |
| Nearside Seat belt buckle not functioning as intended (7.1.2 (d)) | 2 |
| Nearside Fuel cap/sealing device missing (6.1.3 (b) (i)) | 2 |
| Offside Front Drivers seat moving inadvertently (6.2.5 (b) (ii)) | 2 |
| Nearside Rear Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 2 |
| Offside Rear Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 2 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 2 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mount (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 (5.3.6 (a) (i)) | 2 |
| Nearside Body component damaged and likely to cause injury mirror |6.2.1 |a| |i|| | 2 |
| Rear Brake slack adjuster has restricted free movement |3.5.1k| | 2 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front bush |2.4.B.2| | 2 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 2 |
| Nearside Front Outer Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Nearside Front Windscreen in an unacceptable condition (3.2 (c) (i)) | 2 |
| Nearside Rear Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 2 |
| Nearside Seat belt locking mechanism does not secure or release |5.1.B.6a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back mount |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill x2 |2.4.A.3| | 2 |
| Electrical wiring insecure horn |1.9.2a| | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill |7.1.1 |a| |i|| | 2 |
| Nearside Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
| Nearside Front position lamp|s| incorrect colour blue |1.1.A.3e| | 2 |
| Offside Driver`s door hinge insecure |6.2.B.2| | 2 |
| Nearside Rear Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail area |2.4.A.3| | 2 |
| Emission control equipment obviously defective (8.2.2.1 (a)) | 2 |
| Nearside Rear Braking system leaking cylinder |3.6.A.1| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded footstep |5.2.6| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER SILL HOLED & CORRODED |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER SILL HOLED |2.4.A.3| | 2 |
| Offside Front Body panel damaged and likely to cause injury wing (6.2.1 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outer rigger |2.4.A.3| | 2 |
| Nearside Shock absorber insecure |2.7.2b| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area |6.1.B.2| | 2 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 2 |
| Offside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 2 |
| Access panel cannot be secured in the closed position bonnet |6.4.1| | 2 |
| Offside Rear Position lamp light intensity significantly reduced bad earth |4.2.3 |a| |ii|| | 2 |
| Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 2 |
| Offside Rear Brake hose excessively damaged (1.1.12 (b) (ii)) | 2 |
| Nearside Front Lower brake caliper securing device missing |3.5.1j| | 2 |
| Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 2 |
| Suspension spring mounting prescribed area is excessively corroded offside rear outer sill |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front eye |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear eye |2.4.A.3| | 2 |
| Offside Windscreen wiper blade missing (3.4 (b) (ii)) | 2 |
| Offside Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis (5.3.6 (a) (i)) | 2 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing and chassis |2.4.A.3| | 2 |
| Offside Front Power steering fluid level below minimum |2.3.1| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering door step |6.1.A.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering door step |6.1.A.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 2 |
| Stop lamp insecure |1.2.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill behind wheel |2.4.A.3| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 2 |
| Offside Rear rear brake recording little or no effort park |3.7.B.5a| | 2 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Lower Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 2 |
| Stop lamp not working |1.3.2a| | 2 |
| Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 2 |
| Nearside Front Suspension arm has excessive play in a pin/bush wishbone rear bush |2.4.G.2| | 2 |
| Front Power steering ram|s| leaking from a failed joint |2.3.3b| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear inner sill |6.1.B.2| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 2 |
| Offside Rear Indicator tell tale inoperative |1.4.A.2a| | 2 |
| Nearside Rear Braking system leaking brake |3.6.A.1| | 2 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step |6.2.2 |d| |i|| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 2 |
| Nearside Rear Brake rod reduced in thickness more than 1/3rd by chaffing |3.5.1a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of spring (5.3.6 (a) (i)) | 2 |
| Upper Front position lamp|s| not working both |1.1.A.3b| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 2 |
| Offside Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting point |2.4.A.3| | 2 |
| Centre Rear Electrical wiring inadequately supported |1.9.2a| | 2 |
| Offside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 2 |
| Offside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii)) | 2 |
| Nearside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 2 |
| Offside Inner Rear Road wheel badly damaged |4.2.A.1a| | 2 |
| Front Windscreen wiper not working (3.4 (a)) | 2 |
| Offside Inner Front Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Nearside Rear Leaf spring with an unsafe modification (5.3.1 (d) (i)) | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 2 |
| Fluid leak harmful to the environment or a risk to other road users (8.4.1 (a) (i)) | 2 |
| Inner Rear Braking system leaking |3.6.A.1| | 2 |
| Nearside Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Centre Front Upper Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 2 |
| Inner Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at both ends |2.4.A.3| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at crossmember |6.1.B.2| | 2 |
| Nearside Rear rear brake recording little or no effort (3.7.B.5a) | 2 |
| Offside Front Front wheel bearing rough when rotated (2.5.A.2) | 2 |
| Nearside Rear Outer Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Rear Outer Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 2 |
| Nearside Front Sub-frame insecurely attached (5.3.3 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear hanger |2.4.A.3| | 2 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Outer Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Offside Outer Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Inner Rear Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded step |2.4.A.3| | 2 |
| Nearside Front Sub-frame attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 2 |
| Offside Front Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 2 |
| Fuel system component leaking injector area |7.2.3| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 2 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush inscure |2.4.G.2| | 2 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger |6.2.2 |d| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected x2 |5.3.6 |a| |ii|| | 2 |
| Centre Driver`s view restricted by object |6.9.1a| | 2 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 2 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 2 |
| Rear Brake hose inappropriately repaired |3.6.A.3| | 2 |
| Offside Front Lower Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Offside Front Upper Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill. (6.2.2 (d) (i)) | 2 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 2 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Upper Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area |6.1.B.2| | 2 |
| Centre Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step (7.1.1 (a) (i)) | 2 |
| Offside Rear Tie bar/rod attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 2 |
| Nearside Body insecure and dangerous to other road users bumper |6.1.B.1b| | 2 |
| Exhaust has a major leak of exhaust gases exhaust incomplete |7.1.2| | 2 |
| Offside Front Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
| Rear Exhaust has a major leak of exhaust gases tail pipe |7.1.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg. (5.3.6 (a) (i)) | 2 |
| Nearside Front Outer Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Nearside Rear Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Service brake grabbing severely |3.7.C.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2| | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Fuel cap/sealing device sealing washer missing |6.7.2b| | 2 |
| Nearside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 2 |
| Exhaust has a major leak of exhaust gases middle (6.1.2 (a)) | 2 |
| Nearside Front Upper Fuel system component leaking |7.2.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 2 |
| Nearside Outer Vehicle structure has damage which adversely affects braking or steering sill |6.1.A.1| | 2 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step and sill area |5.2.6| | 2 |
| Front Brake pipe inadequately clipped both |3.6.B.1| | 2 |
| Hazard warning lamps inoperative All |1.4.B.1b| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 2 |
| Offside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch |2.4.A.3| | 2 |
| Front Lower Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at |5.3.6 |a| |i|| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step |6.2.2 |d| |i|| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 2 |
| Offside Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Cab steps in such a condition that it is likely to cause injury door step corroded (6.2.8 (b)) | 2 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 2 |
| Offside Rear Halfshaft likely to become detached (6.1.7 (a) (ii)) | 2 |
| Offside Front Headlamp missing |1.7.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded closing panel |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 2 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner Sill |5.2.6| | 2 |
| Nearside Front Drag link end damaged and unserviceable |2.2.C.1d| | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced out rigger |7.1.1 |a| |i|| | 2 |
| Tie bar/rod insecure |2.4.G.1| | 2 |
| Offside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear / rear inner sill |2.4.A.3| | 2 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear / rear inner sill |2.4.A.3| | 2 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill near anchor |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill & inner sill near anchor |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded offside rear side panel - swing shackle |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear pannel |2.4.A.3| | 2 |
| Fuel system component leaking (7.2.3) | 2 |
| Hazard warning switch faulty (1.4.B.1d) | 2 |
| Offside Rear Leaf spring linkage pin not correctly positioned |2.4.B.3a| | 2 |
| Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 2 |
| Nearside Rear Statutory seat belt missing buckle |5.1.1| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Nearside Dropside corroded and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Brake operation has insufficient assistance for at least two more brake applications after the warning device has operated |3.3.D.3b| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 2 |
| Front Anti-roll bar insecure |2.4.G.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 2 |
| Nearside Front Suspension rod ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Front Lower Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Offside Front Lower Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Offside Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Body has a projection caused by corrosion sill inner and outer |6.1.C.1| | 2 |
| Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 2 |
| Offside Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 2 |
| Trailer electrical socket insecure missing |1.9.3a| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis leg |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is fractured inner wing |2.4.A.3| | 2 |
| Front Drive shaft uj which forms part of the suspension has a missing flange bolt |2.4.G.4c| | 2 |
| Offside Rear Axle beam cracked |2.5.A.5a| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch/floor |6.1.B.2| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL ARCH |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL ARCH |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded SILLS |5.2.6| | 2 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis |3.1.9| | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush d-bush |2.4.G.2| | 2 |
| Offside Front Anti-roll bar has excessive play in a pin/bush d-bush |2.4.G.2| | 2 |
| Exhaust has a major leak of exhaust gases tail pipe |7.1.2| | 2 |
| Central Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 2 |
| Centre Rear Fuel tank insecure |7.2.1| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 2 |
| Front passenger door does not latch securely closed (6.2.3 (a)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired UNDER ARCH (6.2.2 (d) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer wheel arch |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and outrigger |2.4.A.3| | 2 |
| Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Rear Exhaust system not adequately supported section |7.1.1| | 2 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 2 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement both sides |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Supplementary Restraint System warning lamp indicates a fault (5.4.2) | 2 |
| Front Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Offside Front Body insecure and dangerous to other road users bumper loose |6.1.B.1b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger (5.3.6 (a) (i)) | 2 |
| Nearside Outer Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside Front Power steering pump leaking from a failed component |2.3.3b| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around rear spring hanger |6.1.B.2| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center box section |6.1.B.2| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring hanger |6.1.B.2| | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i)) | 2 |
| Nearside Rear Direction indicator has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides rear |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount area |2.4.A.3| | 2 |
| Front drive shaft support bearing excessively worn |2.5.C.2c| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mounting area corroded |2.4.A.3| | 2 |
| Offside Front Ball joint ball pin shank loose |2.2.B.1c| | 2 |
| Offside Front Anti-lock braking system wiring excessively damaged |3.4.3| | 2 |
| Offside Rear Brake cable has a seized clevis joint pivot |3.5.1c| | 2 |
| Nearside Front Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Rear reflector missing Both (4.8.2 (a) (ii)) | 2 |
| Outline marker lamp missing Both rear (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting |5.3.6 |a| |i|| | 2 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner arch holed |2.4.A.3| | 2 |
| Supplementary Restraint System warning lamp indicates a fault air bag light |5.4.2| | 2 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 2 |
| Offside Front coil spring modified and seriously weakened |2.4.A.2| | 2 |
| Nearside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 2 |
| Rear Statutory seat belt missing all |5.1.1| | 2 |
| Upper Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Nearside Entrance/exit door damaged and function impaired |6.2.C.1a| | 2 |
| Centre Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 2 |
| Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength drop sill near rear spring front mount (5.3.6 (a) (i)) | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings PASSENGER STEP - UNDERSIDE |6.1.B.2| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded (6.1.1 (c) (i)) | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step corroded (6.1.1 (c) (i)) | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded backing sill |2.4.A.3| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion quarter panel |6.1.C.1| | 2 |
| Offside Outer Body has a projection caused by corrosion sill |6.1.C.1| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 2 |
| Offside Rear Body has a projection caused by corrosion wheel arch |6.1.C.1| | 2 |
| Nearside Rear Body has a projection caused by corrosion wheel arch |6.1.C.1| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is severely distorted sill |2.4.A.3| | 2 |
| Nearside coil spring cracked |2.4.C.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower inner sill |2.4.A.3| | 2 |
| Fuel tank insecure Front strap broken |7.2.1| | 2 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Brake operation stored air pressure or vacuum depletes when ancillary equipment is operated |3.3.E.4| | 2 |
| Nearside Rear Shock absorber has an excessively worn rubber bush |2.6.4| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area (7.1.1 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back |2.4.A.3| | 2 |
| Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab (7.1.1 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis/inner wing |2.4.A.3| | 2 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis |3.1.9| | 2 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view door mirror |8.1.2a| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step sill |2.4.A.3| | 2 |
| Brake pump/compressor drive belt excessively loose |3.6.F.1| | 2 |
| Suspension component mounting prescribed area is excessively corroded Rear crossmember |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 2 |
| Offside Front Body component corroded and likely to cause injury Wing |6.2.1 |a| |i|| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring mount |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg behind rear wheel |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker top |2.4.A.3| | 2 |
| Offside Rear Leaf spring linkage pin missing |2.4.B.3a| | 2 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill
|5.2.6| | 2 |
| Offside Lower Driver`s door hinge insecure |6.2.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner arch |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mounting area |5.3.6 |a| |i|| | 2 |
| Rear Suspension component mounting prescribed area is severely distorted cross member |2.4.A.3| | 2 |
| Offside Front Outer Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing drivers |5.2.2a| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step area |5.2.6| | 2 |
| Offside Front Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Nearside Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Nearside Front Body has a sharp edge caused by damage Wing |6.1.C.1| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing area |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis area |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis area |2.4.A.3| | 2 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf mount |2.4.A.3| | 2 |
| Headlamp aim beam image obviously incorrect Both |1.8.A.1b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill panel |2.4.A.3| | 2 |
| Nearside Rear Mechanical brake component locking device insecure |3.5.1l| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch. |5.3.6 |a| |i|| | 2 |
| Offside Rear Tie bar/rod missing |2.4.G.1| | 2 |
| Offside Upper Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Rear Outer Outline marker lamp not working |4.2.1 |a|| | 2 |
| Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Inner Front Road wheel bead rim badly distorted |4.2.A.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill |5.3.6 |a| |i|| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 2 |
| Nearside Inner Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Nearside Position lamp not working side light |4.2.1 |a|| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 2 |
| Nearside Rear Outer Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear of leaf spring |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill / step |5.2.6| | 2 |
| Drivers door does not latch securely closed (6.2.3 (a)) | 2 |
| Offside Front Body has a sharp edge caused by damage Mirror |6.1.C.1| | 2 |
| Supplementary Restraint System warning lamp indicates a fault AIRBAG |5.4.2| | 2 |
| Nearside Side repeater incorrect colour |4.4.3 |a|| | 2 |
| Front Bonnet seriously at risk of opening inadvertently (3.1 (b) (ii)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step holed |6.1.B.2| | 2 |
| Offside Front Hazard warning lamps inoperative (4.4.1 (e)) | 2 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 2 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 2 |
| Offside Seat belt obviously repaired |5.2.2c| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 2 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and chassis rail |2.4.A.3| | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i|| | 2 |
| Offside Rear Bonded suspension unit attachment loose |2.4.F.1a| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sil |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear panel |2.4.A.3| | 2 |
| Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch x2 |2.4.A.3| | 2 |
| Nearside Outer Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis to floor |2.4.A.3| | 2 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load valve area |3.3.A.2| | 2 |
| Direction indicators flashing more than 120 times a minute all |1.4.A.2g| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger x2 |2.4.A.3| | 2 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 2 |
| Nearside Outline marker lamp not working centre (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded various |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded various |2.4.A.3| | 2 |
| Nearside Rear Exhaust has a part missing |7.1.1a| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x3 |2.4.A.3| | 2 |
| Nearside Rear Upper Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch x2 |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outer chassis |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at anchor |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger outrigger |6.1.1 |c| |i|| | 2 |
| Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area (5.3.6 (a) (i)) | 2 |
| Rear Position lamp not working BOTH (4.2.1 (a) (ii)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting area |2.4.A.3| | 2 |
| Inner Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 2 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt outer |2.4.G.2| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner step area |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 2 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 2 |
| Brake valve leaking load valve |1.1.7 |d| |i|| | 2 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area |6.1.1 |c| |i|| | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired wing |5.3.6 |a| |i|| | 2 |
| Nearside Front Upper Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring area |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cab step |7.1.1 |a| |i|| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step and sill |5.2.6| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing corroded |2.4.A.3| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shocker top |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shocker top |2.4.A.3| | 2 |
| Nearside Statutory seat belt of the wrong type. |5.1.1| | 2 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Centre Exhaust has a major leak of exhaust gases |6.3.2a| | 2 |
| Front position lamp|s| incorrect colour blue |1.1.A.3e| | 2 |
| Offside Outer Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut mounting |2.4.A.3| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal |7.1.1 |a| |i|| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded several places |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 2 |
| Nearside Rear Body has a sharp edge caused by damage light lens |6.1.C.1| | 2 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Rear position lamp|s| adversely affected by the operation of another lamp all |1.1.A.3f| | 2 |
| passenger door cannot be opened from outside the vehicle Side loading door |6.2.B.1c| | 2 |
| Nearside passenger door cannot be opened from outside the vehicle Sliding door |6.2.B.1c| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/floor (5.3.6 (a) (i)) | 2 |
| Nearside Front Outline marker lamp missing (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 2 |
| Trailer electrical socket (13 pin) not functioning at all (4.10 (c) (ii)) | 2 |
| Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear of leaf spring |2.4.A.3| | 2 |
| Offside Brake load sensing valve linkage seized |3.6.E.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 2 |
| Nearside Front Upper brake caliper securing device missing |3.5.1j| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 |6.1.B.2| | 2 |
| Nearside Stop lamp emits other than a steady red light lens broken |1.2.1e| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 2 |
| Offside Front Power steering component leaking (2.1.5 (a)) | 2 |
| Nearside Front Steering component damaged and unserviceable |2.2.C.1d| | 2 |
| Front Position lamp not working Both sides (4.2.1 (a) (ii)) | 2 |
| Nearside Front Upper Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front Torsion bar insecure at an end fixing |2.4.E.2| | 2 |
| Brake pipe inadequately clipped under bonnet |3.6.B.1| | 2 |
| Offside Front Drivers door hinge insecure (6.2.3 (c) (ii)) | 2 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both d bushes |2.4.G.2| | 2 |
| Brake linkage has abnormal movement of levers indicating excessive wear |3.5.1f| | 2 |
| Power steering pipe/hose leaking at steering rack |2.1.5 |a|| | 2 |
| Nearside Outer Rear position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Rear Loading door cannot be secured in the closed position |6.2.1 |e|| | 2 |
| Offside Rear Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Central Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Nearside Front Seat belt attachment fitting badly deteriorated |5.2.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger x2 |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 2 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Door step |7.1.1 |a| |i|| | 2 |
| Offside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired (6.2.2 (d) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch |5.3.6 |a| |i|| | 2 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 2 |
| Nearside Rear Upper Rear reflector missing |1.5.1a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle end |2.4.A.3| | 2 |
| Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x2 places |2.4.A.3| | 2 |
| Exhaust emits visible black smoke at idle |7.4.A.1| | 2 |
| Nearside Front Position lamp missing |4.2.1 |a|| | 2 |
| Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 2 |
| Offside Front Lower Power steering pipe|s| or hose|s| leaking |2.3.3b| | 2 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended missing |1.9.4| | 2 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 2 |
| Nearside Outer Rear position lamp|s| missing |1.1.A.3a| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mounting |5.3.6 |a| |ii|| | 2 |
| Nearside Inner Steering system has excessive free play detected at the steering wheel |steering rack fitted| rack end |2.2.A.1b| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sills |2.4.A.3| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near fuel tank (6.1.1 (c) (i)) | 2 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step area |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step corroded |5.2.6| | 2 |
| Brake valve leaking load sensing valve |1.1.7 |d| |i|| | 2 |
| Offside Rear Leaf spring has a deteriorated shackle rubber bush resulting in excessive movement |2.4.B.2| | 2 |
| Nearside Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 2 |
| Rear Braking system leaking compensator |3.6.A.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member |5.3.6 |a| |i|| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor and step |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 2 |
| Offside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 2 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 2 |
| Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2) | 2 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 2 |
| Track rod end ball joint has excessive play x2 |2.2.B.1f| | 2 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 2 |
| Nearside Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Leaf spring main leaf fractured (5.3.1 (b) (ii)) | 2 |
| Offside Rear Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Rear Lower Anti-roll bar linkage which is adjustable, locking device missing |2.4.G.1| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab step (6.1.1 (c) (i)) | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle |6.1.B.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep |6.1.1 |c| |i|| | 2 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Nearside Rear Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5| | 2 |
| Nearside Rear Wheel hub spigot mounting excessively worn |4.2.B.5| | 2 |
| Offside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 2 |
| Front Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 2 |
| Offside Side repeater incorrect colour |4.4.3 |a|| | 2 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor (7.1.1 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top (5.3.6 (a) (i)) | 2 |
| Central Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Centre Seat belt anchorage prescribed area is excessively corroded cross member |5.2.6| | 2 |
| Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 2 |
| Nearside Rear Upper Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 2 |
| Nearside Front Radius arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Ball joint dust cover missing |2.2.C.1c| | 2 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 2 |
| Centre Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Offside Rear Upper Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Vehicle Identification Number not displayed |0.2 |a|| | 2 |
| Front Front wheel bearing rough when rotated both sides |2.5.A.2| | 2 |
| Brake actuating linkage mounting prescribed area is excessively corroded load valve |3.3.A.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 2 |
| Offside Front Lower Suspension arm worn and seriously weakened |2.4.G.1| | 2 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp bad earth |1.2.1f| | 2 |
| Centre Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Outer Emergency exit sign missing |6.2.D.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by leaf spring mount |5.3.6 |a| |i|| | 2 |
| Offside Upper Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing area |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area |7.1.1 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill chalked and inner step (5.3.6 (a) (i)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch |6.1.B.2| | 2 |
| Nearside Outer Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/floor |5.2.6| | 2 |
| Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Rear Fluid suspension accumulator leaking |2.4.D.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired sill |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill x2 |5.2.6| | 2 |
| Front Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front |5.3.6 |a| |i|| | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area |7.1.1 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in several places |2.4.A.3| | 2 |
| Offside Rear Outer Road wheel bead rim badly distorted |4.2.A.1a| | 2 |
| Offside Rear Body component insecure (6.2.1 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer /inner sill |5.2.6| | 2 |
| Centre Brake linkage excessively corroded and seriously weakened |3.5.1e| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded as marked |2.4.A.3| | 2 |
| Nearside Rear Stop lamp not in good working order |function impaired| |1.3.2b| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 2 |
| Offside Rear Lower Ball joint has excessive play |2.2.B.1f| | 2 |
| Brake load sensing valve linkage defective and function impaired valve seized |1.1.17 |a|| | 2 |
| Emissions not tested Due to excessive smoke (8.2.2.2 (e)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Corner |2.4.A.3| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch area |6.1.B.2| | 2 |
| Nearside Front Track rod end excessively corroded and unserviceable |2.2.C.1d| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chalked |2.4.A.3| | 2 |
| Nearside Front Body component corroded and likely to cause injury wing holed (6.2.1 (a) (i)) | 2 |
| Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to step |6.2.2 |d| |i|| | 2 |
| Front Rear wheel bearing has excessive play |2.6.2| | 2 |
| Nearside Rear Glazing/screen/partition not made of safety glass or safety glazing |6.9.8| | 2 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 2 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 2 |
| Bonnet primary retaining device ineffective unable to open |3.1 |c|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected at spring hanger |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected at spring hanger |5.3.6 |a| |ii|| | 2 |
| Nearside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed |5.3.6 |a| |i|| | 2 |
| Offside Front Steering component is not secure to the vehicle structure |2.2.B.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker top |2.4.A.3| | 2 |
| Offside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 2 |
| Nearside Outer Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 2 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch area (6.2.2 (d) (i)) | 2 |
| Offside Front Suspension arm pin or bush excessively worn bottom arm rear bush (5.3.4 (a) (i)) | 2 |
| Centre Fuel system component insecure |7.2.1| | 2 |
| Nearside Front Upper Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Brake valve retaining device missing |3.6.A.2d| | 2 |
| Nearside Inner Front Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 2 |
| Offside Front Anti-roll bar pin or bush excessively worn d bush |5.3.4 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring mount |5.3.6 |a| |i|| | 2 |
| Offside Rear Upper Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
| Nearside Front Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember |5.3.6 |a| |i|| | 2 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outrigger |5.3.6 |a| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 2 |
| Front Lower Suspension arm has excessive play in a ball joint offside and nearside |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member (5.3.6 (a) (i)) | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH (5.3.6 (a) (i)) | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 2 |
| Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides |2.2.C.1c| | 2 |
| Nearside Rear Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted (1.1.17 (b)) | 2 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under door step |5.2.6| | 2 |
| Offside Rear Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 2 |
| Nearside Rear Brake prescribed area is excessively corroded chassis (1.1.21 (e) (i)) | 2 |
| Fuel tank insecure rear strap broken |6.1.3 |a| |i|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 2 |
| Front Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step area |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 2 |
| Nearside Rear Bumper insecure (6.1.4 (a) (i)) | 2 |
| Central Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Offside Front Hydraulic brake calliper insecurely mounted |1.1.16 |c| |i|| | 2 |
| Offside Rear Seat belt cut causing the fibres to separate |5.1.B.3a| | 2 |
| Offside Inner Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 2 |
| Exhaust emissions exceed manufacturers specified limit Plate value 0.68 (8.2.2.2 (a)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill x 2 |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 2 |
| Fuel tank insecure tank strap |6.1.3 |a| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 2 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Nearside Inner Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 2 |
| Offside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch to floor |6.1.1 |c| |i|| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mounting (5.3.6 (a) (ii)) | 2 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 2 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both doorstep under sills (7.1.1 (a) (i)) | 2 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Offside Front Body has a sharp edge caused by corrosion wing corroded and holed |6.1.C.1| | 2 |
| Offside Front Road wheel more than one fixing missing |5.2.1 |a| |ii|| | 2 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced step (6.1.1 (a) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under drivers seat |5.2.6| | 2 |
| Offside Rear Lower Torsion bar attachment bracket loose |2.4.E.4a| | 2 |
| Nearside Upper Rear position lamp|s| insecure |1.1.A.3a| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 2 |
| Lower All position lamps not working |1.1.A.3b| | 2 |
| Inner front brake binding |3.7.B.1| | 2 |
| Nearside Front Steering lock stop loose |2.2.D.2c| | 2 |
| Fuel tank insecure strap snapped (6.1.3 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear of wheel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength panel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear of wheel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 2 |
| Parking brake mechanism/associated mounting prescribed area is severely distorted |3.1.9| | 2 |
| Nearside Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 2 |
| Offside Rear Rear fog lamp light intensity significantly reduced |4.5.4 |a|| | 2 |
| Offside Rear Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 2 |
| Offside Front Road wheel badly distorted (5.2.2 (c) (i)) | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner arch various |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting (5.3.6 (a) (i)) | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangers |5.3.6 |a| |i|| | 2 |
| Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x member (6.2.2 (d) (i)) | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis |3.6.C.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner seal |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner seal & floor |5.2.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner seal & floor |5.2.6| | 2 |
| Rear Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 2 |
| Nearside Inner Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 2 |
| Centre Rear Passenger`s seat security significantly reduced |6.5.14| | 2 |
| Speed limiter plate missing |7.10 |e|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength FRONT (5.3.6 (a) (i)) | 2 |
| Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 2 |
| Nearside Rear Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Fuel tank leaking |6.7.1a| | 2 |
| Offside Rear passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 2 |
| Offside Front Driver`s view to front impaired by crack |6.9.1b| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring hanger |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to arch |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to arch |2.4.A.3| | 2 |
| Centre Rear Seat belt cut causing the fibres to separate |5.1.B.3a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis by Shock Absorber |2.4.A.3| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 2 |
| Nearside Passenger grab handle insecure (9.6 (b) (ii)) | 2 |
| Rear Emergency exit door cannot be opened from inside the vehicle (9.1.2 (a)) | 2 |
| Offside Rear Seat belt buckle damaged (7.1.2 (d)) | 2 |
| Nearside Front Fuel tank insecure (6.1.3 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill x2 |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/wheel arch |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch by engine mounting |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front most |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front most |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front most |2.4.A.3| | 2 |
| Nearside Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Under step |5.2.6| | 2 |
| Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength forward (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mount |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber (5.3.6 (a) (i)) | 2 |
| Brake load sensing valve linkage obviously incorrectly adjusted |3.6.F.4| | 2 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 2 |
| Offside Front Lower Suspension arm has excessive play in a ball joint outer |2.4.G.2| | 2 |
| Offside Front Body has a projection caused by corrosion wing insecure |6.1.C.1| | 2 |
| Offside Rear Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) | 2 |
| Nearside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 2 |
| Nearside Front Outer Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 2 |
| Offside Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Inner Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Lower Fuel system component leaking |7.2.3| | 2 |
| Electrical wiring likely to touch hot or rotating parts (4.11 (a) (iii)) | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch areas |2.4.A.3| | 2 |
| Nearside Side repeater not working STAYING ON |1.4.A.2c| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 2 |
| Offside Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 2 |
| Offside Body has a sharp edge caused by damage Wing mirror |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring anchor |5.3.6 |a| |i|| | 2 |
| Front Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 2 |
| Central Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger
|2.4.A.3| | 2 |
| Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side step |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by bump stop (5.3.6 (a) (i)) | 2 |
| Inner Obligatory mirror missing |8.1.1| | 2 |
| Nearside Headlamp aim does not move downwards when dipped |British American headlamp| |1.8.C.4| | 2 |
| Nearside Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 2 |
| Nearside Rear Brake cable damaged rubbing on wheel (1.1.15 (a)) | 2 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x5 |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 2 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear |2.4.G.2| | 2 |
| Track rod end ball joint has excessive play BOTH SIDES |2.2.B.1f| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel (5.3.6 (a) (i)) | 2 |
| Inner Front Statutory seat belt missing |5.1.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outersill |2.4.A.3| | 2 |
| Nearside Inner Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Centre Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Under step (7.1.1 (a) (i)) | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded and holed. (6.2.2 (d) (i)) | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i)) | 2 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement REAR |2.4.G.2| | 2 |
| Nearside Front Power steering pipe/hose leaking (2.1.5 (a)) | 2 |
| Offside Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x3 (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength crossmember |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear hanger |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear outrigger |2.4.A.3| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 2 |
| Prop shaft bearing excessively worn centre bearing |6.1.7 |b| |i|| | 2 |
| Offside Rear Hydraulic fluid leaking excessively brake |8.4.1 |a| |i|| | 2 |
| Nearside Rear Lower Seat belt insecurely fixed to the seat |5.2.1a| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front |6.1.B.2| | 2 |
| Rear Brake load sensing valve has been removed and was fitted as standard |3.6.E.2| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Braking system leaking Wheel cylinder |3.6.A.1| | 2 |
| Power steering pipe|s| or hose|s| leaking from a joint on steering rack |2.3.3b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 2 |
| Offside Steering component damaged and unserviceable |2.2.C.1d| | 2 |
| Rear engine mounting bracket insecure and likely to fail |6.1.D.1b| | 2 |
| Nearside Front Leaf spring anchor pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Fuel tank leaking |7.2.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner chassis rail |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis rail |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill /step |5.2.6| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch to sill |6.1.C.1| | 2 |
| Nearside Rear Anti-roll bar fractured (5.3.3 (b) (ii)) | 2 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp bad earth |1.1.A.3f| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step inner sill |5.2.6| | 2 |
| Rear Brake cable knotted |3.5.1b| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind strut (5.3.6 (a) (i)) | 2 |
| Nearside Inner Front Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch |2.4.A.3| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded center outrigger |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear panel |2.4.A.3| | 2 |
| Offside Rear Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle mount area (5.3.6 (a) (i)) | 2 |
| Nearside Inner Front Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 2 |
| Electrical wiring inadequately supported under bonnet |1.9.2a| | 2 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 2 |
| Front Prop shaft bearing housing likely to fail |6.1.7 |f| |ii|| | 2 |
| Offside Front Horn not working |7.7 |a| |ii|| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat |6.1.B.2| | 2 |
| Floor excessively deteriorated |6.2.4 |a| |i|| | 2 |
| Rear Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 2 |
| Headlamp lens seriously defective Both (4.1.1 (b) (ii)) | 2 |
| Offside Rear Brake pipe excessively damaged (1.1.11 (c)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is fractured rear of cab |5.2.6| | 2 |
| Offside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii)) | 2 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 2 |
| Front Main beam `tell-tale` not working |1.7.4c| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger (5.3.6 (a) (i)) | 2 |
| Offside Engine mounting excessively loose |6.1.8 |a| |ii|| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount |6.1.B.2| | 2 |
| Offside Front Inner Floor excessively deteriorated |6.2.4 |a| |i|| | 2 |
| Front Upper Position lamp not working both (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill areas |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step area |5.2.6| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 2 |
| Rear Brake actuating linkage mounting prescribed area is inadequately repaired |3.3.A.2| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above rear axle |6.1.1 |c| |i|| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above rear axle |6.1.1 |c| |i|| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting area |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger corroded |2.4.A.3| | 2 |
| Rear Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength x2 |5.3.6 |a| |i|| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central (6.1.1 (c) (i)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front inner sill |2.4.A.3| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 2 |
| Suspension component mounting prescribed area is excessively corroded both centre / rear chassis rail outriggers |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill panel |2.4.A.3| | 2 |
| Exhaust has a major leak of exhaust gases rear box |7.1.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill areas |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing areas |5.3.6 |a| |i|| | 2 |
| Central Front Seat belt damaged |7.1.2 |b| |i|| | 2 |
| Nearside Front Upper Suspension spring mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 2 |
| Offside Outer Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Inner Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 2 |
| Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front hanger (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch (5.3.6 (a) (i)) | 2 |
| Offside Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 2 |
| Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 2 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step |5.3.6 |a| |i|| | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner 1/4 panel |5.3.6 |a| |i|| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheelarch |6.1.B.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 2 |
| Adjustable towbar locating pin retaining device missing |6.6.5c| | 2 |
| Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 2 |
| Nearside Rear Upper Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sills |5.2.6| | 2 |
| Front Wheel bearing rough when rotated both |5.1.3 |b| |i|| | 2 |
| Nearside Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount (5.3.6 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 2 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 2 |
| Front Sub-frame modified and seriously weakened |2.4.A.2| | 2 |
| Offside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 2 |
| Brake valve leaking (1.1.7 (d) (i)) | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush D-BUSH |2.4.G.2| | 2 |
| Prop shaft bearing excessively worn Most Rear (6.1.7 (b) (i)) | 2 |
| Nearside Inner Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter panel |6.1.B.2| | 2 |
| Nearside Body has a projection caused by corrosion SILL |6.1.C.1| | 2 |
| rear brake recording little or no effort both rear |3.7.B.5a| | 2 |
| Fluid leak harmful to the environment or a risk to other road users diesel (8.4.1 (a) (i)) | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill MARKED (6.1.1 (c) (i)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 2 |
| Centre Rear Towbar component excessively corroded |6.6.1| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 2 |
| Offside Outer Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 2 |
| Nearside Steering component damaged and unserviceable |2.2.C.1d| | 2 |
| Lower Steering column shaft retaining device insecure |2.1.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner/outer sill |2.4.A.3| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail behind wheel |2.4.A.3| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Wing |5.2.6| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 2 |
| Offside Rear Upper Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch (6.1.1 (c) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Emissions not tested due to engine noise (8.2.2.2 (e)) | 2 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in various places (6.1.1 (c) (i)) | 2 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill. |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill. |2.4.A.3| | 2 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone rear bush |5.3.4 |a| |i|| | 2 |
| Offside External window insecure and likely to fall out |6.11.1| | 2 |
| Offside Obligatory mirror seriously damaged, affecting the rear view door mirror |8.1.2a| | 2 |
| Central Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Nearside Rear Body insecure (6.2.2 (a) (i)) | 2 |
| Offside Rear Anti-roll bar linkage cracked |2.4.G.1| | 2 |
| Nearside Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmember |6.6.6| | 2 |
| Brake hydraulic reservoir fluid not visible |1.1.10 |d| |iii|| | 2 |
| Nearside Front Brake pedal does not operate a brake fitted to each wheel |3.3.A.3| | 2 |
| Brake hydraulic reservoir insecurely mounted |3.6.A.2a| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x3 |6.1.B.2| | 2 |
| Centre Rear Brake valve leaking |3.6.A.1| | 2 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt outer |6.1.7 |g| |ii|| | 2 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner step (6.2.2 (d) (i)) | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 2 |
| Nearside Inner Front Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Nearside Rear Leaf spring inappropriately repaired |2.4.A.2| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded step/floor |5.2.6| | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i)) | 2 |
| Centre Front Lower Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Offside Outer Rear position lamp|s| missing |1.1.A.3a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring (5.3.6 (a) (i)) | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre (6.1.1 (c) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to floor (6.1.1 (c) (i)) | 2 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area and inner wing (5.3.6 (a) (i)) | 2 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area and inner wing (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember near spring hanger (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember near spring hanger (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded wing |2.2.C.1h| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area |7.1.1 |a| |i|| | 2 |
| Nearside Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Obligatory mirror insecure |3.3 |b| |ii|| | 2 |
| Rear Direction indicator insecure |1.4.A.2b| | 2 |
| Offside Front drive shaft coupling flexible rubber or fabric coupling insecure |2.5.C.1e| | 2 |
| Rear Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear inner sill |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Fuel system component leaking Fuel pump |7.2.3| | 2 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear most sill |2.4.A.3| | 2 |
| Offside Front Inner Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under door step |5.2.6| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OUTRIGGER |2.4.A.3| | 2 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember in several places |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Step |2.4.A.3| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Above axle |6.1.A.1| | 2 |
| Nearside Rear Leaf spring main leaf fractured front spring eye (5.3.1 (b) (ii)) | 2 |
| Nearside Rear Brake prescribed area is excessively corroded load sensing valve (1.1.21 (e) (i)) | 2 |
| Offside brake disc insecure |3.5.1i| | 2 |
| Offside Rear Lower Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 2 |
| Centre Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch |5.3.6 |a| |i|| | 2 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area |5.3.6 |a| |i|| | 2 |
| Prop shaft bearing excessively worn x 2 (6.1.7 (b) (i)) | 2 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet |6.1.B.2| | 2 |
| Suspension component mounting prescribed area is excessively corroded both front inner flitches badly in several places |2.4.A.3| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near engine mount |6.1.B.2| | 2 |
| Offside Rear Electrical wiring damaged, likely to cause a short |1.9.2b| | 2 |
| Rear Brake valve leaking load valve |1.1.7 |d| |i|| | 2 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear out rigger |2.4.A.3| | 2 |
| Offside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 2 |
| Offside Front Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed |7.1.1 |a| |i|| | 2 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill area (6.2.2 (d) (i)) | 2 |
| Offside Front Lower Power steering component|s| leaking from a failed joint |2.3.3b| | 2 |
| Offside Rear Rear fog lamp insecure |1.3.2a| | 2 |
| Nearside Front Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Offside Front Inner Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is fractured |2.4.A.3| | 2 |
| Offside Indicator tell tale missing |1.4.A.2a| | 2 |
| Exhaust engine idle speed too high |7.3.A.2a| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 2 |
| Rear Position lamp adversely affected by the operation of another lamp both (4.2.3 (c)) | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced drivers step |7.1.1 |a| |i|| | 2 |
| Offside Front Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Outer Rear position lamp|s| incomplete |1.1.4a| | 2 |
| Offside Headlamp levelling device inoperative |1.7.2| | 2 |
| Nearside Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Rear Brake load sensing valve linkage defective and function impaired siezed |1.1.17 |a|| | 2 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 2 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i)) | 2 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Offside Upper Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Upper Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner step area |5.2.6| | 2 |
| Offside Rear All outline marker lamps not working |4.2.1 |a|| | 2 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 2 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember |6.2.2 |d| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chalked |2.4.A.3| | 2 |
| Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Brake slack adjuster has restricted free movement |3.5.1k| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 2 |
| Rear position lamp|s| adversely affected by the operation of another lamp both rear |1.1.A.3f| | 2 |
| Nearside Rear Seat belt damaged (7.1.2 (b) (i)) | 2 |
| Oil leaking excessively from engine engine bay |8.4.1 |a| |i|| | 2 |
| Nearside Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3| | 2 |
| Nearside Rear Brake cable has restricted free movement (1.1.15 (e)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring eye |2.4.A.3| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 2 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step holed (6.2.2 (d) (i)) | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner cill |6.1.B.2| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 2 |
| Offside Front Lower Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Offside Rear fog lamp does not emit a steady red light lens broken |1.3.2e| | 2 |
| Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded o/s inner sill |2.4.A.3| | 2 |
| Suspension spring mounting prescribed area is excessively corroded n/s sill |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner / outer step |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear mount |2.4.A.3| | 2 |
| Nearside Body has a sharp edge caused by corrosion step |6.1.C.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis supporting panel |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 2 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 2 |
| Offside Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow (6.1.1 (c) (i)) | 2 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill. |6.1.B.2| | 2 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch |2.4.A.3| | 2 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired (6.2.2 (d) (ii)) | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 2 |
| Nearside Front Lower Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 2 |
| Front Fuel tank insecure strap |7.2.1| | 2 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 2 |
| Offside Front Lower brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Front Lower Body has a projection caused by damage |6.1.C.1| | 2 |
| Offside Rear Body component damaged and likely to cause injury light lens (6.2.1 (a) (i)) | 2 |
| Nearside Front passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 2 |
| Nearside Outer Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 2 |
| Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d)) | 2 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement front wishbone rear bush |2.4.G.2| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement inner rear |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting |2.4.A.3| | 2 |
| Front Side repeater incomplete |1.5.A1b| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep underneath |5.2.6| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 2 |
| Centre Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle |5.3.6 |a| |i|| | 2 |
| Offside Front Drive shaft joint constant velocity boot missing |6.1.7 |g| |ii|| | 2 |
| Offside Front Lower Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis. (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis. (5.3.6 (a) (i)) | 2 |
| Offside Rear Direction indicator incorrect colour |1.5.1d| | 2 |
| Nearside Rear fog lamp emits a light other than red |1.1.6a| | 2 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Battery insecure both |1.9.1| | 2 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s |6.1.B.2| | 2 |
| Outer Front Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of |2.4.A.3| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill step |5.2.6| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 2 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner arches |2.4.A.3| | 2 |
| Offside Obligatory mirror missing glass |8.1.1| | 2 |
| Inner Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount area |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount area |5.3.6 |a| |i|| | 2 |
| Offside Front Road wheel fixing missing nut |5.2.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 2 |
| Offside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outrigger |6.1.B.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wing |2.4.A.3| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member |6.1.1 |c| |i|| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 2 |
| Offside Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer step |5.2.6| | 2 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 2 |
| Front Windscreen washer control is inaccessible to the driver |8.2.1a| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded sill at rear |2.4.A.3| | 2 |
| Nearside Front Upper Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 2 |
| All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Offside Rear fog lamp obscured more than 50% |1.3.2c| | 2 |
| Nearside Front Ball joint has excessive play steering rack arm |2.2.B.1f| | 2 |
| Centre Front Brake pipe fouled by moving parts |3.6.B.2a| | 2 |
| Nearside Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i|| | 2 |
| Nearside Rear Lower Tie bar/rod synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded MARKED |2.4.A.3| | 2 |
| Offside Rear Body panel corroded and likely to cause injury Wheel arch (6.2.1 (a) (i)) | 2 |
| Offside Rear Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Rear Anti-roll bar linkage ball joint excessively worn both drop links (5.3.4 (a) (i)) | 2 |
| Offside Front Inner Brake prescribed area is excessively corroded chassis (1.1.21 (e) (i)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mounting area |6.1.B.2| | 2 |
| Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 2 |
| Central Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Nearside Lower Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 2 |
| Front Brake disc significantly and obviously worn NS/OS (1.1.14 (a) (i)) | 2 |
| Offside Front Front suspension locking device ineffective |2.5.A.4| | 2 |
| Nearside Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp bad earth |1.1.A.3f| | 2 |
| Brake load sensing valve missing where fitted as standard |1.1.17 |d|| | 2 |
| Nearside Rear Brake linkage has restricted free movement |3.5.1k| | 2 |
| Central Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 2 |
| Offside Front Body panel corroded and likely to cause injury Wheel arch (6.2.1 (a) (i)) | 2 |
| Braking system leaking compensator |3.6.A.1| | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch load area (6.1.1 (c) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (under bonnet) (5.3.6 (a) (i)) | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OSR INNER ARCH |6.1.B.2| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSR INNER ARCH |6.1.B.2| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded innerwing |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount area |5.3.6 |a| |i|| | 2 |
| Nearside Rear Lower Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2 places |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting area |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill area |5.2.6| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by front of rear spring |2.4.A.3| | 2 |
| Offside Outline marker lamp not working x3 |4.2.1 |a|| | 2 |
| Outline marker lamp not working both front |4.2.1 |a|| | 2 |
| Outline marker lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 2 |
| Nearside Body has a sharp edge caused by corrosion side board |6.1.C.1| | 2 |
| Offside Body has a sharp edge caused by corrosion side board |6.1.C.1| | 2 |
| Stop lamp|s| adversely affected by the operation of another lamp both |4.3.3 |b|| | 2 |
| Offside Front Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer |6.1.B.2| | 2 |
| Offside Front Outer Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner arch area |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sills |5.2.6| | 2 |
| Nearside Rear fog lamp insecure |1.3.2a| | 2 |
| Nearside Front Brake hose damaged and likely to fail |1.1.12 |a|| | 2 |
| Nearside Direction indicator not working side repeater (4.4.1 (a) (ii)) | 2 |
| Offside Rear Body has a sharp edge caused by damage lamp lens |6.1.C.1| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear crossmember excessively corroded, rear part of osr spring hanger bracket corroded/missing |2.4.A.3| | 2 |
| Offside Front All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Nearside Front Body has a sharp edge caused by damage Bumper insecure |6.1.C.1| | 2 |
| Steering damper leaking oil |2.2.C.1f| | 2 |
| Nearside Front Leaf spring fractured (5.3.1 (b) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner body |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner body |2.4.A.3| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch as marked (5.3.6 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill holed |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded springhanger mounting bracket |2.4.A.3| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear of wheel |5.3.6 |a| |i|| | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear of wheel |5.3.6 |a| |i|| | 2 |
| Offside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible |5.3.1 |a| |ii|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Spring mounting |2.4.A.3| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 2 |
| Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel |1.1.6 |c|| | 2 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn d bush |5.3.4 |a| |i|| | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn d bush |5.3.4 |a| |i|| | 2 |
| Offside Front Suspension arm pin or bush excessively worn rear |5.3.4 |a| |i|| | 2 |
| Rear Stop lamp not working Both rear bulbs not working. |1.2.1b| | 2 |
| Offside Front Lower Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 2 |
| Body has a sharp edge caused by corrosion rear bumper |6.1.C.1| | 2 |
| Front Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Nearside Front Upper Position lamp not working |4.2.1 |a| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step |7.1.1 |a| |i|| | 2 |
| Service brake indicates brake bind |3.7.D.2a| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill Panel |5.2.6| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger |6.1.1 |c| |i|| | 2 |
| Nearside Front Position lamp missing (4.2.1 (a) (ii)) | 2 |
| Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 2 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Power steering component|s| leaking Rack |2.3.3b| | 2 |
| Offside Rear Inner Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 2 |
| Offside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 2 |
| Nearside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible |5.3.1 |a| |ii|| | 2 |
| Offside Front Body panel corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 2 |
| Nearside Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Offside Headlamp levelling device obviously defective |1.7.2| | 2 |
| Nearside Front Headlamp aim beam image too far to the right |1.6.4| | 2 |
| Offside Front Headlamp aim beam image too far to the right |1.6.4| | 2 |
| Offside Inner Body has a projection caused by corrosion sill |6.1.C.1| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 2 |
| Central Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 2 |
| Offside Front Suspension arm attachment bracket/mounting nut missing |2.4.G.1| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 2 |
| Nearside Rear Additional braking device damaged |3.6.I.1| | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassi (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 2 |
| Front Fuel tank insecure tank strap corroded |7.2.1| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under front wing |2.4.A.3| | 2 |
| Offside Front Brake lever excessively corroded and seriously weakened |3.5.1e| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel well |2.4.A.3| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnet |6.1.B.2| | 2 |
| Front Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 2 |
| Offside Rear Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 2 |
| Nearside Rear coil spring broken |2.4.C.1a| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shockabsorber |2.4.A.3| | 2 |
| Nearside Front Upper All outline marker lamps not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Driving control|s| defective due to rubbish likely to interfere with the proper control of the vehicle. |6.8.2| | 2 |
| Offside Front Seat belt stitching badly frayed DRIVERS |5.2.2b| | 2 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x4 |6.1.B.2| | 2 |
| Offside Front Inner Macpherson strut mounting corroded and seriously weakened wheel arch |5.3.3 |b| |i|| | 2 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement both |2.4.G.2| | 2 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre out rigger |2.4.A.3| | 2 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.3.2f| | 2 |
| Rear Service brake effort inadequate at a wheel low effort rear axle (1.2.1 (a) (i)) | 2 |
| Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Offside Front Lower Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 2 |
| Nearside Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 2 |
| Nearside Front Seat belt obviously repaired |5.2.2c| | 2 |
| Offside Outer Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger |5.3.6 |a| |i|| | 2 |
| Central Prop shaft bearing excessively worn both |6.1.7 |b| |i|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber area |2.4.A.3| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 2 |
| Power steering component leaking Steering rack |2.1.5 |a|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill back (7.1.1 (a) (i)) | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3| | 2 |
| Speedometer cannot be illuminated |7.8 |c| |ii|| | 2 |
| Central Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 2 |
| Front Headlamp not working on dipped beam both (4.1.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 2 |
| Offside Front Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 2 |
| Nearside Inner Front brake disc excessively scored |3.5.1h| | 2 |
| Offside Front Upper Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Nearside Front Upper Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Nearside Inner Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis by shackle |2.4.A.3| | 2 |
| Offside Body has a sharp edge caused by damage step |6.1.C.1| | 2 |
| Offside Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting (5.3.6 (a) (i)) | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 2 |
| Offside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Indicator switch faulty |1.4.A.1| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 2 |
| Nearside Rear Leaf spring fractured spring eye |2.4.B.1a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front mounting |2.4.A.3| | 2 |
| Nearside Rear Road wheel badly distorted (5.2.2 (c) (i)) | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch holed |6.1.B.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 |5.3.6 |a| |i|| | 2 |
| Nearside Front Ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/ inner sill |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 (5.3.6 (a) (i)) | 2 |
| Offside Front Body has a sharp edge caused by corrosion sill |6.1.C.1| | 2 |
| Towbar locking device insecure |6.6.3b| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on chassis |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on chassis |2.4.A.3| | 2 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 2 |
| Offside Front Body has a sharp edge caused by corrosion wing corroded |6.1.C.1| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 2 |
| Fuel tank insecure strap rotted |7.2.1| | 2 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement REAR |2.4.G.2| | 2 |
| Offside Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 2 |
| Offside Outer Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Brake load sensing valve linkage obviously incorrectly adjusted missing |3.6.E.3| | 2 |
| Nearside Rear Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 2 |
| Nearside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings behind cab |6.1.B.2| | 2 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings behind cab |6.1.B.2| | 2 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |3.1.9| | 2 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in arch |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chasis |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/chassis |2.4.A.3| | 2 |
| Inner Rear Rear fog lamp not working |1.3.2b| | 2 |
| Prop shaft bearing excessively worn both front and rear (6.1.7 (b) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 2 |
| Nearside Rear Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Offside brake disc cracked |3.5.1h| | 2 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 2 |
| Nearside Inner Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/chassis |2.4.A.3| | 2 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is severely distorted |5.2.6| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 2 |
| Nearside Rear Lower Suspension has inadequate clearance with the chassis |2.4.A.1a| | 2 |
| Rear fog lamp adversely affected by the operation of another lamp both |1.3.2f| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount area inner sill |2.4.A.3| | 2 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 2 |
| Nearside Rear Braking system leaking (1.1.3 (d)) | 2 |
| Nearside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner panel |2.4.A.3| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded rigger |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger |5.3.6 |a| |i|| | 2 |
| Obligatory mirror missing |3.3 |a|| | 2 |
| Offside Seat belt buckle not functioning as intended |7.1.2 |d|| | 2 |
| Offside Outer Obligatory mirror insecure |8.1.1| | 2 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 2 |
| Front Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL HOLED & CORRODED |2.4.A.3| | 2 |
| Nearside Front Headlamp insecure |4.1.1 |c|| | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Rear Rear position lamp|s| incorrect colour lens damaged |1.1.A.3e| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg as marked |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 2 |
| Rear Anti-roll bar pin or bush excessively worn "D" bushes |5.3.4 |a| |i|| | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 2 |
| Offside Front Outline marker lamp not working roof lamp (4.2.1 (a) (ii)) | 2 |
| Nearside Front Outline marker lamp not working roof lamp (4.2.1 (a) (ii)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 2 |
| Offside Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Emissions not tested due to oil leak (8.2.2.2 (e)) | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded hanger area |2.4.A.3| | 2 |
| Nearside Front Headlamp insecure top mount broken (4.1.1 (c)) | 2 |
| Spare wheel likely to fall from vehicle |6.5.13| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 2 |
| Offside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 2 |
| Nearside Rear Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis rail |5.2.6| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 2 |
| Nearside Inner Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Lower Leaf spring eye defective |shackle| |2.4.B.1b| | 2 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded several places |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded several places |5.2.6| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor mount |2.4.A.3| | 2 |
| Nearside Front Suspension arm cracked |2.4.G.1| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 2 |
| Centre Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Front Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 2 |
| Offside Rear Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 2 |
| Nearside Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shock absorber mounting |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under door sill |2.4.A.3| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded door sill |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Nearside Front Steering locking device missing track rod end |2.2.C.1g| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded UNDER SILL |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember |5.3.6 |a| |i|| | 2 |
| Rear Prop shaft flexible coupling so deteriorated it is likely to fail |6.1.7 |d| |ii|| | 2 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in arch |2.4.A.3| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 2 |
| Nearside Rear Outer Road wheel bead rim badly distorted |4.2.A.1a| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre inner sill |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top mount |2.4.A.3| | 2 |
| Offside Outer Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Front position lamp|s| not working sidelight |1.1.A.3b| | 2 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc outer |2.5.C.1a| | 2 |
| Nearside Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 2 |
| Offside Front Tie bar/rod insecure |2.4.G.1| | 2 |
| Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 2 |
| Drivers door catch insecure (6.2.3 (c) (ii)) | 2 |
| Nearside Rear Leaf spring fractured front eye |2.4.B.1a| | 2 |
| Nearside Rear Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion wheelarch |6.1.C.1| | 2 |
| Offside Rear Oil leaking excessively from transmission (8.4.1 (a) (i)) | 2 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 2 |
| Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Front Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - as chalked. |7.1.1 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded over axle |2.4.A.3| | 2 |
| Nearside Rear Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab |6.1.1 |c| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mounting area (5.3.6 (a) (i)) | 2 |
| Front Lower Fuel system component insecure |7.2.1| | 2 |
| Nearside Rear Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Front Drag link end socket spring weak |2.2.B.1e| | 2 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt bottom ball joint (5.3.4 (b) (ii)) | 2 |
| Front Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 2 |
| Seat belt attachment fitting fractured |5.2.3| | 2 |
| Offside Rear Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 2 |
| Rear Anti-roll bar has excessive play in a pin/bush D bushes |2.4.G.2| | 2 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush front bush |2.4.B.2| | 2 |
| Offside Rear Leaf spring cracked spring eye |2.4.B.1a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill and wheel arch |2.4.A.3| | 2 |
| Offside Front Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Wing |2.4.A.3| | 2 |
| Offside Body has a sharp edge caused by damage (6.1.C.1) | 2 |
| Offside Rear Lower Anti-roll bar linkage insecure (2.4.G.1) | 2 |
| Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 2 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded close to back shackle mount |2.4.A.3| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 2 |
| Suspension arm ball joint excessively worn nearside & offside front (5.3.4 (a) (i)) | 2 |
| Nearside Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Headlamp levelling device inoperative both (4.1.5 (a)) | 2 |
| Offside Front Inner Suspension arm has excessive play in a pin/bush rear |2.4.G.2| | 2 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded centre chassis leg |3.1.9| | 2 |
| Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 2 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded top chassis |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded top chassis |2.4.A.3| | 2 |
| Front Brake pivot has restricted free movement |3.5.1k| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step sill |5.2.6| | 2 |
| Centre Upper Fuel system component leaking |7.2.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear drop sill |2.4.A.3| | 2 |
| Rear Suspension component mounting prescribed area is excessively corroded x3 centre cross member |2.4.A.3| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor |7.1.1 |a| |i|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab step |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor / inner flitch |2.4.A.3| | 2 |
| Nearside Axle has inadequate clearance with the bump stop |2.4.A.1a| | 2 |
| passenger door cannot be opened from outside the vehicle side door |6.2.B.1c| | 2 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 2 |
| Nearside Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 2 |
| Centre Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i)) | 2 |
| Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel well |6.1.B.2| | 2 |
| Front wheel bearing has excessive play both |2.5.A.3c| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch x2 |2.4.A.3| | 2 |
| Brake pedal creeps with the vacuum fully depleted |3.3.C.2| | 2 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 2 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 2 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction phone holder (3.1 (a) (ii)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing |6.2.2 |d| |i|| | 2 |
| Outer Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside All outline marker lamps not working |4.2.1 |a| |ii|| | 2 |
| Offside Front Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s n/s (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by bump stop |2.4.A.3| | 2 |
| Nearside Body has a sharp edge caused by damage headlamp |6.1.C.1| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outrigger |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outrigger |5.3.6 |a| |i|| | 2 |
| Rear Brake rod locking device missing |3.5.1l| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner / outer sill |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 2 |
| Exhaust system not adequately supported at rear |7.1.1| | 2 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger |6.1.A.1| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger |6.1.A.1| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step area |5.2.6| | 2 |
| Nearside Track rod end socket spring weak |2.2.B.1e| | 2 |
| Offside Rear Brake disc contaminated |1.1.14 |b|| | 2 |
| Fuel system component leaking Injectors |7.2.3| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 2 |
| Exhaust emissions exceed manufacturers specified limit plate limit 1.19 (8.2.2.2 (a)) | 2 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 2 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 2 |
| Nearside Front engine mounting bracket insecure and likely to fail |6.1.D.1b| | 2 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Inner chassis |6.1.B.2| | 2 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 2 |
| Fuel system component leaking in engine bay |7.2.3| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing. (5.3.6 (a) (i)) | 2 |
| Nearside Headlamps matched pair are not the same colour |1.7.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top mount |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill as marked |2.4.A.3| | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step (6.1.1 (c) (i)) | 2 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner & outer sills |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chasis leg |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked |5.3.6 |a| |i|| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i|| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Upper Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
| Nearside Front Outer Seat belt insecurely fixed to the seat |5.2.1a| | 2 |
| Rear Service brake effort inadequate at a wheel both (1.2.1 (a) (i)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 2 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened (5.3.1 (b) (i)) | 2 |
| Rear Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 2 |
| Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 2 |
| Central Seat belt not functioning as intended (7.1.2 (c)) | 2 |
| Nearside Rear Upper Anti-roll bar insecure |2.4.G.1| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end |5.3.6 |a| |i|| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer cill |6.1.B.2| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
| Nearside Direction indicator insecure |1.4.A.2b| | 2 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 2 |
| Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear of spring (5.3.6 (a) (i)) | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 2 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement back bush |2.4.G.2| | 2 |
| Nearside Rear Leaf spring slipper insecure |2.4.B.5| | 2 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front All position lamps excessively deteriorated so that they are not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet |6.1.1 |c| |ii|| | 2 |
| Nearside Brake pipe fouled by moving parts |3.6.B.2a| | 2 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp earth fault |1.2.1f| | 2 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch holed |6.1.B.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock mounting |2.4.A.3| | 2 |
| Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner/outer sill |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x-member |2.4.A.3| | 2 |
| Fuel tank insecure front strap |7.2.1| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i)) | 2 |
| Centre Hazard warning switch faulty |1.4.B.1d| | 2 |
| Centre Rear Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outrigger |6.1.A.1| | 2 |
| Front Exhaust system not adequately supported first box joint clamp |7.1.1| | 2 |
| Offside Rear Stop lamp obscured more than 50% |1.2.1c| | 2 |
| Offside Rear Rear fog lamp obscured more than 50% |1.3.2c| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by bump stop |2.4.A.3| | 2 |
| Rear Outer Emergency exit sign missing |9.1.2 |b| |ii|| | 2 |
| Nearside Front Suspension component ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides |6.1.1 |c| |i|| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step |7.1.1 |a| |i|| | 2 |
| Direction indicator adversely affected by the operation of another lamp both rear |4.4.3 |b|| | 1 |
| Fuel system component leaking excessively or a risk of fire yellow part on filter housing |6.1.3 |b| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside and offside chassis rails behind front subframe |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outter sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear fog lamp does not emit a steady red light operates reverse light |4.5.4 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step not joined to inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step not joined to inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind macpherson strut extending forwards |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Inner Front Lower Suspension arm insecure |2.4.G.1| | 1 |
| Offside Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement Link rod |2.4.G.2| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect bulb |1.8.A.1b| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush `d` bush |2.4.G.2| | 1 |
| Offside Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Fuel pipe leaking at pump |7.2.3| | 1 |
| Fuel tank insecure tank strap missing |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear sptimg mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear sptimg mount |2.4.A.3| | 1 |
| Speedometer clearly inoperative working as a tachometer and sitting at 15mph at stand still |6.7.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering step box area |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering step box area |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill area |6.1.A.1| | 1 |
| Offside Rear Tie bar/rod locating pin locking device missing |2.4.G.3b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tail board |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both sides inner sills (6.1.1 (c) (i)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both sides wheel arch area (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/floor |6.1.B.2| | 1 |
| Braking system leaking pipe to l.s.v |3.6.A.1| | 1 |
| Electrical wiring insecure and in contact with sharp edges WIRES AT BATTERY BOX UNDER DRIVERS SEAT (4.11 (a) (ii)) | 1 |
| Nearside Front Body component corroded and likely to cause injury lower wing corroded sharp edge (6.2.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering upper chassis rail (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced chassis cracked (6.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component attachment bracket/mounting missing wheel bearing housing fixing bolt missing (5.3.3 (a) (ii)) | 1 |
| Nearside Front Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks horn wiring bare wires (4.11 (c) (iii)) | 1 |
| Rear Seat belt locking mechanism does not secure or release unable to inspect all rear belts due to items on rear seat |5.2.5a| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill / door step |5.2.6| | 1 |
| Offside Rear Lower Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Front Upper Steering system excessively tight |2.2.D.1| | 1 |
| Offside Front Upper Steering system excessively tight |2.2.D.1| | 1 |
| Offside Rear Leaf spring missing and directional control affected (5.3.1 (c) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected centre |5.3.6 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected centre |5.3.6 |a| |ii|| | 1 |
| Offside Inner Drive shaft joint excessively worn |6.1.7 |c| |i|| | 1 |
| Nearside Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rgiger |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner arch area chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area x2 and rear spring mount area x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill area x3 and rear spring mount area x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Arch area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer sill area |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch engine mount |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leafspring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |gearbox mount| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded sill corroded - with a hole patched with filler |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured Spring eye (5.3.1 (b) (i)) | 1 |
| Rear Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring outrigger |5.3.6 |a| |i|| | 1 |
| Front Steering system excessively rough |2.1.1 |a|| | 1 |
| Rear Drive shaft bearing excessively worn |6.1.7 |b| |i|| | 1 |
| Nearside Rear Brake pipe inadequately clipped x 2 |3.6.B.1| | 1 |
| Rear Fuel tank insecure strap corroded |7.2.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind rear wheel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to B pillar |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to B pillar |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded DOOR STEEP |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded DOOR STEEP |5.2.6| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour LENS DAMAGED |1.1.A.3e| | 1 |
| Brake pipe leaking @ compensator |3.6.A.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/o sill + o/s/i sill + n/s step +n/s + o/sf chassis |inner wheel arches| |6.1.B.2| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt split |2.2.C.1c| | 1 |
| Prop shaft bearing excessively worn closest to rear |6.1.7 |b| |i|| | 1 |
| Brake clevis joint has restricted free movement (1.1.15 (e)) | 1 |
| Body insecure and dangerous to other road users exhaust box outer skin |6.1.B.1b| | 1 |
| Stop lamp(s) adversely affected by the operation of another lamp brake lamps and sidelights wired the wrong way round (4.3.3 (b)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush bolt is chafing on the anti roll bar, making hole bigger |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush bolt is chafing on the anti roll bar, making hole bigger |2.4.G.2| | 1 |
| Exhaust system insecure at rear |6.1.2 |a|| | 1 |
| Nearside Rear rear brake recording little or no effort and offside |3.7.B.5a| | 1 |
| Central Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength NSR and OSR outriggers (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing x2 |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie at rear subframe mount |6.1.1 |c| |i|| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced chassi (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at doorstep |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring mountings |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leafspring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded Load sensing valve (1.1.21 (e) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above leaf spring (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced By tow bar mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of arch/ rear of sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch to floor within 30 cm of spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of inner arch and outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill with in 30 cm of seat mount |7.1.1 |a| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded near out rigger |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch with in 30 cm of top spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch corroded |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured anchor eye |2.4.B.1a| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s n/s inner wings |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers o/s n/s |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wing corroded |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner quarter panel corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering o/s n/s |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s n/s sill backs and steps |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arches and floor o/s n/s |6.1.B.2| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement o/s n/s |2.4.G.2| | 1 |
| Nearside Outer Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front mount |2.4.A.3| | 1 |
| Nearside Front Front position lamp|s| not working and offside front |1.1.A.3b| | 1 |
| Rear Brake valve has an excessive discharge of oil brake |3.6.E.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear spring area |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking possible leaking from pump area, (6.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/ wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured at front mounting point (5.3.1 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded In two places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner step and rigger, and inner wheelarch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner and outer step and rigger ,and inner wheelarch |2.4.A.3| | 1 |
| Offside Front Outer Track rod end loose |2.2.B.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis box section near bump stop within 30cm of shock absorber mounting |2.4.A.3| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect no image obtained and light beam too high (4.1.2 (c)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp both rear position lamps effected by hazzard lights , hazzards back feeding through side light circuit and poss fog lamp circuit (4.2.3 (c)) | 1 |
| Offside Stop lamp(s) adversely affected by the operation of another lamp effected by o/s indicator (4.3.3 (b)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering next to bump stop |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering next to bump stop |6.1.A.1| | 1 |
| Nearside Rear Brake cable damaged cable broken (1.1.15 (a)) | 1 |
| Offside Front Outer Body has a sharp edge caused by damage Mirror broken |6.1.C.1| | 1 |
| Offside Front Lower Dropside cannot be secured in the closed position |6.4.1| | 1 |
| Offside Lower Dropside cannot be secured in the closed position |6.4.1| | 1 |
| Headlamp aim beam image too far to the right |1.6.B4| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Offside Rear Lower Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE REAR INNER SILL (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR SIDES OF CROSS MEMBER (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced BOTH INNER SILLS AT DOOR STEPS (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Seat belt affected by a cracked seat frame |5.2.1b| | 1 |
| Nearside Front Lower brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside Front Lower brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill within 30cm of suspension |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 1 |
| Prop shaft likely to become detached bolt missing rear section (6.1.7 (a) (ii)) | 1 |
| Rear Prop shaft securing bolt missing (6.1.7 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/topmount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/topmount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom arm/floor (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom arm/floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis cut to access bottom arm captive (5.3.6 (a) (i)) | 1 |
| Offside Semaphore indicator tell tale not working correctly |1.4.C.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger and rear crossmember areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger and crossmember areas |2.4.A.3| | 1 |
| Nearside Stop lamp insecure |1.2.1a| | 1 |
| Nearside Inner Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 1 |
| Offside Inner Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded side step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Side Step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner Sill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion center sub frame mounting area (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion inside inner wheel arch 30 cm of engine mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion inside inner wheel arch 30 cm of engine mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Leg (6.1.1 (c) (i)) | 1 |
| Outline marker lamp missing Both Rear (4.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced On top of chassis leg / Under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step in various places |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Step in various places |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner and outer sill in various places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner sill in various places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chasse |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chasse inner and outer |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chasse |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush D ring bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush D ring bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch in various places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner arch chasse |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inside wheel arch box section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Panel |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering middle crossmember |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering middle crossmember |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor to chassis |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor to chassis |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill front and rear |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill front and rear |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded of rear crossmember |2.4.A.3| | 1 |
| Offside Front Floor excessively deteriorated step floor (6.2.4 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 1 |
| Rear Towbar component insecure supporting bolts sheared both sides |6.6.1| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Rear Additional braking device component damaged rear load valve |3.6.I.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear most hanger plate not attached |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most hanger on outer side |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing above mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded above mounting |2.4.A.3| | 1 |
| Brake pipe leaking 2x front to rears under bonnet |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by suspension leg top mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill corroded |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill corroded |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie holed |6.1.B.2| | 1 |
| Offside Front Brake pipe inappropriately repaired new pipe rubs on bodywork needs re-routing |3.6.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner outer sills and floor area |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shock mounting/ inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mountig |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired shock mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired shock mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Front and rear leaf spring mountings. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Front and rear leaf spring mountings. (5.3.6 (a) (i)) | 1 |
| Service brake juddering severely |3.7.C.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill COMPLETE (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section next to spring mount as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Towbar attachment insecure nut missing of bolt (6.1.6 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing........ (5.3.6 (a) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting full cross member (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension hanger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner flitch panel |2.4.A.3| | 1 |
| Offside Front Lower Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Nearside Rear Lower Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Nearside Suspension arm ball joint excessively worn bottom ball joint |5.3.4 |a| |i|| | 1 |
| Offside Suspension arm ball joint excessively worn bottom ball joint |5.3.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis near leaf spring mounting |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Outer Front position lamp|s| not working marker |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassiss (5.3.6 (a) (i)) | 1 |
| Nearside Front All position lamps not working top |1.1.A.3b| | 1 |
| Offside Rear wheel cylinder securing device missing |3.5.1j| | 1 |
| Nearside Rear Leaf spring fractured front eye |5.3.1 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step holed |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill holed |5.2.6| | 1 |
| Central Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded out rigger corroded rear of cab |5.2.6| | 1 |
| Offside Stop lamp emits other than a steady red light showing white |1.2.1e| | 1 |
| Centre Front Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |3.1.9| | 1 |
| Nearside All outline marker lamps not working & offside (4.2.1 (a) (ii)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle cross member between front mountings of rear springs (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing & surrounding area x3 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill ,front mounting on rear spring leaf |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch,holed in 3 places,at front shocker mounting |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear silencer box holed corroded and blowing |7.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed and corroded at spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected centre chassis holed and excess corrosion |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top and side |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at lsv |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnett |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Towbar fractured seriously affecting its strength within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nr leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced nr steps |7.1.1 |a| |i|| | 1 |
| Offside Front Macpherson strut corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nr shocko |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill section (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill section (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre outer sill section (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section holed/corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section holed/corroded x2 areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section holed/corroded above axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section holed/corroded above axle (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step x2 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at fuel tank (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases section (6.1.2 (a)) | 1 |
| Nearside Intermediate drop arm insecure to the extent there is excessive movement at the mountings |2.1.3 |a| |ii|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg at wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg at wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk x2 (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch marked with chalk (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch marked with chalk (6.2.2 (d) (i)) | 1 |
| Nearside Body has a sharp edge caused by corrosion drop side corroded |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired wheel arch |5.3.6 |a| |i|| | 1 |
| Brake valve leaking such that brake functionality is affected |1.1.7 |d| |ii|| | 1 |
| Brake pipe inadequately clipped across bulkhead |3.6.B.1| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 1 |
| Exhaust has a major leak of exhaust gases rear tailpipe/silencer missing |7.1.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis, under bonnet |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/ wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/ wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner panel |2.4.A.3| | 1 |
| Brake pedal anti-slip provision missing brake pedal rubber |3.3.A.1b| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength springhanger support panel |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre inner sill outrigger support panel |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger & inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger behind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg behind rear wheel |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill/under step sill |2.4.A.3| | 1 |
| Stop lamp not working N/S AND O/S |1.2.1b| | 1 |
| Centre Rear Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Rear Body insecure and dangerous to other road users frame to tipper hinges |6.1.B.1b| | 1 |
| Rear Body insecure and dangerous to other road users body carrier frame rotted away |6.1.B.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step/sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step/sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger (5.3.6 (a) (i)) | 1 |
| Rear Rear fog lamp not working |both| |4.5.1 |a| |ii|| | 1 |
| Nearside Front Power steering pipe/hose leaking from fluid tank |2.1.5 |a|| | 1 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle and outside |6.2.B.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and Outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg inner wing |5.3.6 |a| |i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition from the centre to rear is missing |7.1.4| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine could not test due to the exhaust |7.4.B.3b| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear bush worn wishbone dropped |2.5.A.1c| | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings n/s and o/s rear |6.1.B.2| | 1 |
| Nearside Upper Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded Step |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Under lamp unit |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill and backing |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill backing area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger bracket |2.4.A.3| | 1 |
| Fuel system component leaking Injector |7.2.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by sliding door (6.1.1 (c) (i)) | 1 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded stepper panel |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering next to brake compensator |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in the wheel arch |2.4.A.3| | 1 |
| Offside Inner Front Lower Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Offside Front Lower Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Vehicle Identification Number incomplete (0.2 (b)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting arch |6.2.2 |d| |i|| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded wheel |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working top |1.1.A.3b| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill/Wheel arch |marked with chalk| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking and braking performance affected fluid dripping from rear of drum |1.1.16 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis rail, seen behind offside front wheel, has been welded but not continuously on all four edges, shock lower mount area |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor around step |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded floor and wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor and wheel arch |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Upper Towbar retaining device missing |6.6.3a| | 1 |
| Brake disc significantly and obviously worn off side front disc inner face (1.1.14 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill is heavily corroded within 30 cm of seat belt |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill is heavily corroded within 30 cm of seat belt |7.1.1 |a| |i|| | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp interacting with indicator (4.3.3 (b)) | 1 |
| Prop shaft bearing excessively worn center line bearing has excessive play (6.1.7 (b) (i)) | 1 |
| Brake pump retaining device insecure abs |3.6.A.2d| | 1 |
| Nearside Emergency exit door cannot be opened from inside the vehicle sliding door |6.2.D.1a| | 1 |
| Centre Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded with in 12 inches of mountings |6.1.A.1| | 1 |
| Seat belt retracting mechanism defective second row back,centre |5.2.5b| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel to sill |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel to sill |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel to outrigger |6.1.B.2| | 1 |
| Rear Brake pipe modified and seriously weakened |3.6.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed at engine mounting |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed at front chassis leg |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sping hanger mounting holed at front and rear |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger mounting holed at front and rear |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member holed at near side spring hanger |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near to bump stop |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine mounting x member /stut mount |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear outer sills |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill / chassis area (5.3.6 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases exhaust in a poor condition and bent |7.1.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner wheelarces to body floor corroded through behind wheels |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s centre inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s centre outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s centre step |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r inner wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner wing panel |6.1.B.2| | 1 |
| Upper Front position lamp|s| not working markers |1.1.A.3b| | 1 |
| All position lamps not working both side markers |1.1.A.3b| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion on rear body edge |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer side off chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer side off chassis |2.4.A.3| | 1 |
| Nearside Front Service brake lagging in operation comes on far to slow but does work eventually (1.2.1 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area fractured significantly reducing structural strength center of van inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front & rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front & rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis by shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis by shock |2.4.A.3| | 1 |
| Fuel tank insecure Strap corroded |7.2.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis 3 places |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger in front of wheel |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bay panel |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bay panel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floorpan |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded door step/sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger
|2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded `X` member |2.4.A.3| | 1 |
| Inner Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted inner wing |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion both sides tipper bed |6.1.C.1| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both front loose resulting in play. (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users bulb in wroung |1.8.A.1a| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x3 and iner sill |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack joint (2.3 (a) (i)) | 1 |
| Prop shaft bearing excessively worn Both front and rear bearings |6.1.7 |b| |i|| | 1 |
| Offside Front Headlamp lens seriously defective smashed (4.1.1 (b) (ii)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL CORRODED (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/rigger |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/rigger |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and rear sill |6.1.B.2| | 1 |
| Headlamp not working on main beam x2 (4.1.1 (a) (ii)) | 1 |
| Central Rear Seat belt locking mechanism does not secure or release stork missing |5.2.5a| | 1 |
| Offside Rear Seat belt locking mechanism does not secure or release stork missing |5.2.5a| | 1 |
| Nearside Rear Anti-roll bar linkage insecure drop link |2.4.G.1| | 1 |
| Nearside Front Wheel stud|s| missing One wheel stud snapped |4.2.A.1e| | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings above axle bump stop |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings outrigger / xmember |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger / xmemba |6.1.B.2| | 1 |
| Nearside Inner Rear Lower Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Parking brake lever inappropriately repaired |3.1.8| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded SPRING HANGAR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded SPRING HANGAR |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded SILL PANEL |2.4.A.3| | 1 |
| Oil leaking excessively from engine Oil filter. (8.4.1 (a) (i)) | 1 |
| Nearside Front Trailing arm rubber bush deteriorated resulting in excessive movement rear w/bone bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis - by spring hanger - various |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis - by spring hanger - various |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear chassis - by spring hanger - various |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor joint |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor joint |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch - various |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch - various |2.4.A.3| | 1 |
| Central Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill Panel |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill Panel |2.4.A.3| | 1 |
| Brake servo leaking Brake servo vacuum leak |3.6.C.1c| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired nearside rear sill repaired with filler |2.4.A.3| | 1 |
| Offside Rear Inner Seat belt anchorage likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision inner sill (7.1.1 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage likely to become detached in the event of a collision sill (7.1.1 (a) (ii)) | 1 |
| Offside Outer Seat belt anchorage likely to become detached in the event of a collision sill (7.1.1 (a) (ii)) | 1 |
| Nearside Outer Seat belt anchorage likely to become detached in the event of a collision sill (7.1.1 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis rail
by engine mount (6.1.1 (c) (i)) | 1 |
| Front Outline marker lamp not working both n/s and o/s (4.2.1 (a) (ii)) | 1 |
| Offside Rear Lower Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 1 |
| Prop shaft joint excessively worn rear joint |6.1.7 |c| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn front bush |5.3.4 |a| |i|| | 1 |
| Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion sill near door step |6.1.C.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Front Upper Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Central Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bush nut loose |2.4.G.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top mounting |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member supporting propshaft and exhaust |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases manifold to EGR pipe clamp not seated correctly |7.1.2| | 1 |
| Centre Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill x2 chalked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill x2 chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill chalked |2.4.A.3| | 1 |
| Nearside Rear Service brake excessively binding SEVERLY BINDING.... |1.2.1 |f|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch several areas.... |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch several areas.... |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel above front subframe.... |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel above front subframe.... |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at leafspring foward mount.... |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at spring hanger mount areas.... |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis above rear axle.... |5.3.6 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` large fan |8.3.1e| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp showing side light instead of stop |1.2.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired spring hanger repair weak and twisting |2.4.A.3| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis by cable mount |3.1.9| | 1 |
| Front rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer door sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear inner wheel arch and floor |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear sill and outriggers |2.4.A.3| | 1 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Nearside Front Braking system leaking Pipe |3.6.A.1| | 1 |
| Nearside Rear Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill and floor pan |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wheel arch above chassis (6.2.2 (d) (ii)) | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis cross member |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by damage outer sill |6.1.C.1| | 1 |
| Exhaust system not adequately supported snaped pipe |7.1.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step number of places |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step ...number of places |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis and tow bar moutings |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside and nearside rear panels corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front wheel arch inner |6.1.B.2| | 1 |
| Nearside Front Position lamp not working replaced bulb |4.2.1 |a| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Flitch (6.1.1 (c) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab |both sides| |6.2.2 |d| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength next to wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength next to wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength strut top |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength strut top |5.3.6 |a| |i|| | 1 |
| Rear Headlamp insecure both rear taillight units |4.1.1 |c|| | 1 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached Front bush (5.3.4 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer (7.1.1 (a) (i)) | 1 |
| Nearside Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Exhaust has a major leak of exhaust gases inlet manifold |7.1.2| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 0.68 1/m Result 1.43 1/m |8.2.2.2 |a|| | 1 |
| Front Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Nearside Lower Shock absorber insecure |2.7.2b| | 1 |
| Offside Lower Shock absorber insecure |2.7.2b| | 1 |
| Offside Rear Brake back plate|s| securing device loose |3.5.1j| | 1 |
| Rear Loading door cannot be secured in the closed position lower catch not working |6.4.1| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Bonnet retaining device ineffective will not open . Unable to test many engine bay testable items |8.4.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mounting prescribed area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front suspension mount. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front end spring mount. (5.3.6 (a) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Nearside Brake inadequately mounted parking brake cable fouls leaf spring and shock absorber (1.1.21 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around top mount and sub-frame mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around sub-frame mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around top mount (5.3.6 (a) (i)) | 1 |
| Front Lower Front position lamp|s| not working Both sides |1.1.A.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill area |5.2.6| | 1 |
| Rear Outer Anti-roll bar linkage has excessive play in a pin/bush Both sides nuts loose |2.4.G.2| | 1 |
| Offside Position lamp adversely affected by the operation of another lamp position lamp in side repeater (4.2.3 (c)) | 1 |
| Central Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake lining(s) contaminated NEEDS NEW HUB SEALS (1.1.13 (b)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached ALREADY DETATCHED (5.3.4 (a) (ii)) | 1 |
| Front Body panel insecure GRILL (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength STEP AREA (5.3.6 (a) (i)) | 1 |
| Brake pedal has insufficient reserve travel hand brake |1.1.2 |a|| | 1 |
| Power steering pipe/hose leaking on rack |2.1.5 |a|| | 1 |
| Nearside Rear Upper Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush likely to become detached link bolt |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Inner Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Inner Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Seat belt anchorage likely to become detached in the event of a collision back of cab |7.1.1 |a| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded middle cross member |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by fuel line (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing panel |2.4.A.3| | 1 |
| Rear Leaf spring saddle is fractured |2.4.B.7a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing x2 |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor plan |5.2.6| | 1 |
| Nearside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Offside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement drop link |2.4.G.2| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front to rear (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting c post lower |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis near engine mounting |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step/outer sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER WHEEL ARCH |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Inner and outer sill |5.2.6| | 1 |
| Nearside Rear Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wish bone bush |2.4.G.2| | 1 |
| Nearside Inner Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Inner Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Rear Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp interaction with hazzards (4.3.3 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount in 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner quarter |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis corroded |2.4.A.3| | 1 |
| Rear Sound deadening material insecure Silencer outer skin |8.1.1 |b| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded valence |2.4.A.3| | 1 |
| Offside Rear Emergency exit window ???break glass` hammer missing |6.2.D.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Door step |7.1.1 |a| |i|| | 1 |
| Offside Outline marker lamp missing x2 |4.2.1 |a|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded floor x2 |5.2.6| | 1 |
| Nearside Fuel pipe insecure fuel neck |7.2.1| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch(MARKED) (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor (MARKED) (6.2.2 (d) (i)) | 1 |
| Nearside Front Bumper insecure n/s/f corner (6.1.4 (a) (i)) | 1 |
| Offside Front Bumper insecure o/s/f corner (6.1.4 (a) (i)) | 1 |
| Rear Anti-roll bar insecurely attached both rear D bushes worn (5.3.3 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn n/s/f lower suspension arm, rear bush de-bonded, perishing and splitting (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill/ underbody sill/ outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill/ underbody sill / chassis outriggers |2.4.A.3| | 1 |
| Road wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Road wheel more than one fixing missing |5.2.1 |a| |ii|| | 1 |
| Road wheel fixing loose |5.2.1 |a| |i|| | 1 |
| Road wheel fixing missing |5.2.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underbody sill door step area. |5.2.6| | 1 |
| Exhaust emits excessive smoke or vapour of any colour blue smoke |7.4.B.4| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded UPPER CHASSIS RAIL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT SHACKLE MOUNTING |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded REAR SHACKLE MOUNTING |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR SHACKLE MOUNTING |2.4.A.3| | 1 |
| Offside Outer Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings n/s and o/s inner sills |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chaissis |6.1.B.2| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect Bulb installed wrong and reflector plate broken (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Bulb installed wrong (4.1.2 (c)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Look from engine bay (6.1.1 (c) (i)) | 1 |
| Windscreen damaged and affecting the drivers view of the road zone A (3.2 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step, outer x2, inner and wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step, inner and outer x2 (6.2.2 (d) (i)) | 1 |
| Nearside Outer Lower Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Towbar attachment defective locking washer missing |6.1.6 |c| |i|| | 1 |
| Prop shaft joint excessively worn middle |6.1.7 |c| |i|| | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Nearside Body component corroded and likely to cause injury front rear body piller |6.2.1 |a| |i|| | 1 |
| Offside Body component corroded and likely to cause injury rear body front piller |6.2.1 |a| |i|| | 1 |
| Central Front Prop shaft bearing likely to break up (6.1.7 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn "D" (5.3.4 (a) (i)) | 1 |
| Nearside Front Body has a projection caused by damage bumper screw sticking out and insecure |6.1.C.1| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded load sense chassis mount |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis next to shock mount |2.4.A.3| | 1 |
| Offside Front Lower Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 5 places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings been marked |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering seal |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings been marked |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear sills |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis |3.1.9| | 1 |
| Rear Outline marker lamp missing both |4.2.1 |a|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced back edge of foot well (7.1.1 (a) (i)) | 1 |
| Nearside Rear Rear wheel bearing has excessive play thrust worn |2.6.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear chassis leg under wheel arch behind road wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear chassis leg under wheel arch behind road wheel |5.3.6 |a| |i|| | 1 |
| Nearside Front Electrical wiring insecure UNDER BONNET |1.9.2a| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 1st cross rail x 2 holes |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab inner sill x 5 holes |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab inner sill and wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength sill |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded rear sill |5.2.6| | 1 |
| Brake pipe inadequately supported Front to rear. |3.6.B.1| | 1 |
| Central Suspension spring mounting prescribed area is excessively corroded Cross member. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step pannel |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front suspension mount 30cm inner sill |2.4.A.3| | 1 |
| Centre Front Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
| Nearside Front Lower Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Front Side repeater not working both sides (4.4.1 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light tail light damaged (4.5.4 (a)) | 1 |
| Rear Position lamp not working side marker both sides (4.2.1 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded (6.1.1 (c) (i)) | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Rear Service brake excessively fluctuating both sides (1.2.1 (e)) | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings Both rear chassis legs corroded and holed |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch rear mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch front mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount chassis |2.4.A.3| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
| Nearside Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 1 |
| Front Body insecure and dangerous to other road users bonnet |6.1.B.1b| | 1 |
| Offside Front Wheel bolt|s| missing hub bearing bolt missing |4.2.A.1e| | 1 |
| Offside Front Suspension component ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Position lamp not working not working when brake depressed |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicator not working not working when brake depressed |4.4.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring |6.1.B.2| | 1 |
| Power steering pipe/hose excessively corroded pump to rack |2.1.5 |g| |i|| | 1 |
| Brake pipe leaking on a hydraulic braking system Behind Fuel Filter From ABS Pump (1.1.11 (b) (ii)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounts, N/S & O/S |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded N/S & O/S |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded INNER DOOR STEP |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under front wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |front| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wing |2.4.A.3| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step / sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step / sill |6.2.2 |d| |i|| | 1 |
| Rear Brake load sensing valve has been disconnected and was fitted as standard connecting rod |3.6.E.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Nearside Front Brake pipe inadequately supported Hose |3.6.B.1| | 1 |
| Body has a projection caused by corrosion n/s sill need riparing
|6.1.C.1| | 1 |
| Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired wheel arch inner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired to the rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in wheel arch chassis |6.1.A.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch upper near shock mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch marked yellow |2.4.A.3| | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor to chassis (6.1.1 (c) (i)) | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor to chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded door step inner and outer |2.4.A.3| | 1 |
| Centre Rear Swivelling towbar swivel pin retaining device missing |6.6.5c| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp fog and brake |1.4.A.2h| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x4 |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind arch |6.1.B.2| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view glass missing |8.1.2a| | 1 |
| Nearside Front Front position lamp|s| not working side lamp out |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working side lamp out |1.1.A.3b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill to arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chrossmember |6.1.B.2| | 1 |
| Offside Steering arm fractured and unserviceable |2.2.C.1c| | 1 |
| Nearside Front Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis by front spring mount |2.4.A.3| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp light operates incorrectly when other light operated |1.2.1f| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Body has a sharp edge caused by corrosion body sill holed |6.1.C.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch front edge (5.3.6 (a) (i)) | 1 |
| Headlamp light intensity severely reduced Nearside and offside |dirty| |4.1.4 |a|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s sill area |5.2.6| | 1 |
| Central Prop shaft bearing excessively worn x 2 (6.1.7 (b) (i)) | 1 |
| Central Rear Seat belt buckle missing (7.1.2 (d)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in the wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch near shock mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch near shock mount |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill |5.2.6| | 1 |
| Emissions not tested due to leak |7.4.B.1| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is inadequately repaired sill area |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch front |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch top |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch rear |6.1.B.2| | 1 |
| Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper mountings |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch front |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch rear |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch top |6.1.B.2| | 1 |
| Nearside Front Obligatory mirror seriously obscured affecting the rear view door |8.1.2a| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s front to rear inner outer sills |2.4.A.3| | 1 |
| Exhaust system not adequately supported raer |7.1.1| | 1 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired all offside lamp innoperative |1.5.1c| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings drivers step |6.1.B.2| | 1 |
| Nearside Front Upper Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded door step / under sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front eye |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / step |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 1 |
| Nearside Tie bar/rod attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all tipper body/chassis |6.1.B.2| | 1 |
| Offside Front Brake pipe inadequately clipped and hose |3.6.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member corroded |2.4.A.3| | 1 |
| Speedometer clearly inoperative Stuck at 150 |7.8 |b| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Door step |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Door step and inner wing |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired at rear spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corner inner valance |2.4.A.3| | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired near shocker at the front |6.2.2 |a| |ii|| | 1 |
| Outline marker lamp not working Both sides/Loose (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage loose Investigate seat (7.1.1 (b)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel Has leak (1.2.1 (a) (i)) | 1 |
| Exhaust system insecure Clamp broken (6.1.2 (a)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both inner D BUSHES |2.4.G.2| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint also split |2.4.G.2| | 1 |
| Nearside Outline marker lamp not working and loose and osr (4.2.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage loose seat-investigate (7.1.1 (b)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner wings in places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel and something leaking-fix it (1.2.1 (a) (i)) | 1 |
| Exhaust system insecure clamp broken (6.1.2 (a)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing-arch (6.2.1 (a) (i)) | 1 |
| Rear Position lamp missing stop lamp postion lamp indcator (4.2.1 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded on upper chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at various points |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at various points |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced passenger seat mount at floor (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured at front eyelet. |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded at main chassis opposite load valve. |1.1.21 |e| |i|| | 1 |
| Fuel tank insecure front strap is broke and tank is resting in front subframe. |6.1.3 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chassis inside engine bay. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sill (5.3.6 (a) (i)) | 1 |
| Horn sound not in accordance with requirements Not loud enough (7.7 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at inner sill/arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at outrigger near inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at strut turret (5.3.6 (a) (i)) | 1 |
| Centre passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Body has a sharp edge caused by corrosion rear of body |6.1.C.1| | 1 |
| Nearside Front Front suspension locking device missing hub |2.5.A.4| | 1 |
| Offside Rear Body insecure and dangerous to other road users wheel arch mounts |6.1.B.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 1st 4th 5th |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer body mounts |6.1.B.2| | 1 |
| Power steering component|s| leaking high pressure pipe at rack joint |2.3.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill. |5.2.6| | 1 |
| Rear Leaf spring shackle bracket corroded and seriously weakened chassis both outer sides. |2.4.B.6d| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and out sill |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab |6.1.1 |c| |i|| | 1 |
| Nearside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis near shocker |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis near shocker |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg | can be seen from under bonnet| |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured front leaf bush bracket broken |5.3.1 |b| |i|| | 1 |
| Offside Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in three different locations all within the prescribed area and marked with chalk |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both chasis rails above rear axle |6.1.B.2| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Front Steering arm has relative movement at its fixings both |2.2.B.1h| | 1 |
| Centre Statutory seat belt missing STALK |5.1.1| | 1 |
| Central Front Seat belt stitching not secure cut |5.2.2b| | 1 |
| Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning affected by tail/stop |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shockabsorber |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis |chalked| x1 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |chalked| x2 |5.3.6 |a| |i|| | 1 |
| Nearside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Nearside Windscreen in such a condition that visibility through swept area is seriously affected cracked (3.2 (c) (ii)) | 1 |
| Position lamp showing white light to the rear both light units (4.2.3 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear cab outrigger (7.1.1 (a) (i)) | 1 |
| Nearside Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
| Centre Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear most leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength fore most hanger mount chassis (5.3.6 (a) (i)) | 1 |
| Rear Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked (6.2.2 (d) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside and Rear |6.1.B.2| | 1 |
| Windscreen in an unacceptable condition DAMAGE IN SWEPT AREA |3.2 |c| |i|| | 1 |
| Body panel corroded and likely to cause injury N/S & O/S FRONT WINGS |6.2.1 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S & N/S/R MARKED VARIOUS |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR CHASSIS LEGS OUTER
|6.1.B.2| | 1 |
| Subframe mounting prescribed area is excessively corroded o/s/f chassis 2x |2.4.A.3| | 1 |
| Offside Rear Leaf spring anchor pin or bush excessively worn Front bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded floor / bulkhead |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting area in several places |5.3.6 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear spring front mounting as marked |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering above rear axle, next to load sensing valve as marked |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill/step area as marked |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s inner sill / step area as marked |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill as marked |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear -front spring hanger |6.1.1 |c| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shocker mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hangers (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring attachment points both sides |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring attachment points |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring attachment points |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch within coil spring mounting points all over |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch near spring mounting all over arch |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting engine bay both sides inner wings |6.2.2 |d| |i|| | 1 |
| Front front brakes release unevenly biased to the offside |3.7.B.4| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/door step |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch x4 |6.1.B.2| | 1 |
| Centre Outer Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded inner step in places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by comp valve |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Leaf spring anchor bracket corroded and seriously weakened sill |5.3.1 |b| |i|| | 1 |
| Offside Rear Inner Leaf spring anchor bracket corroded and seriously weakened sill |5.3.1 |b| |i|| | 1 |
| Nearside Front Upper Macpherson strut mounting corroded and seriously weakened inner wheel arch |5.3.3 |b| |i|| | 1 |
| Offside Front Upper Macpherson strut mounting corroded and seriously weakened inner wheel arch |5.3.3 |b| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch x4 |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step x2 |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis x3 |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch x2 |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by brake compensator valve |6.1.B.2| | 1 |
| Rear Outer Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill in places |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded lower step |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre out riggers corroded x2 |2.4.A.3| | 1 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting RECOMMEND NOT TO USE TOE BAR DUE TO EXCESSIVE CORROSION |6.6.6| | 1 |
| Centre Rear Seat belt anchorage prescribed area is excessively corroded X MEMBER IN SEVERAL PLACES |5.2.6| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine not tested due to engine |7.4.B.3b| | 1 |
| Brake servo excessively weakened by corrosion |3.6.A.2b| | 1 |
| Rear Entrance/exit door damaged and function impaired |6.2.C.1a| | 1 |
| Nearside Front Horn not a continuous or uniform sound |1.6.2e| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill backs |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill backs |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill backings |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill backings |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis cross member |3.1.9| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill/step area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT & REAR SPRING MOUNTS |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT & REAR SPRING MOUNTS |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch,rear chassis,mid point chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis,inner arch,mid point chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded aiiner chassis leg |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion side door |6.1.C.1| | 1 |
| Power steering component|s| leaking AT RACK |2.3.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AT SPRING HANGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded AT SPRING HANGER |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting X MEMBER |6.6.6| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded x member at engine |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion side door |6.1.C.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x member above diff |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing holed at |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded innerwing at |2.4.A.3| | 1 |
| Brake pipe inadequately supported both front to rear |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front inner and outter sills and lower step area |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded off side rearinner sillfloorpan and chassis box section at rear spring front mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear chassis at rear swing link |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear chassis at rear swing link |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded innerwing in wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded innerwing in wheelarch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis and floorpan |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floorpan |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CROSS MEMBER |2.4.A.3| | 1 |
| Nearside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL STEP HOLED (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL SIGNS OF FILLER (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting CORNER SILL HOLED (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting CORNER SILL HOLED (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting STEP HOLED (6.2.2 (d) (i)) | 1 |
| Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting WING/ARCH HOLED (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting WHEEL / ARCH HOLED IN 2 PLACES (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill repered whith bodge (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner valace (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear valance (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch x2 (6.2.2 (d) (i)) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner arch holes |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and out rigger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake compensator |6.1.A.1| | 1 |
| Offside Front Lower Trailing arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill x4 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.5.1e| | 1 |
| Front Driving control|s| clutch pedal anti-slip provision worn smooth. |6.8.3| | 1 |
| Centre Front Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Rear Exhaust system not adequately supported Bracket corroded off |7.1.1| | 1 |
| Offside Front Inner Track rod end ball joint has excessive play Knuckle |2.2.B.1f| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Trailling |2.4.G.2| | 1 |
| Centre Front drive shaft coupling flexible rubber or fabric coupling insecure |2.5.C.1e| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step/sill |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Driver step/sill |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Trailling bush |2.4.G.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint On the rack |2.3.3b| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint On rack |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear valance close to spring shackle mounting and edge of rear tub (5.3.6 (a) (i)) | 1 |
| Body has a projection caused by corrosion both sides front inner sills |6.1.C.1| | 1 |
| Nearside Body has a projection caused by corrosion centre to rear sill area |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion inner wing arch area |6.1.C.1| | 1 |
| Rear Body has a projection caused by corrosion body area |6.1.C.1| | 1 |
| Rear Body has a sharp edge caused by corrosion both sides wheel arch areas |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear both sides to centre areas |6.1.B.2| | 1 |
| Body has a projection caused by corrosion rear floor areas both sides |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front and rear sill areas |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded front and centre sill area |5.2.6| | 1 |
| Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Seat mounting |5.2.6| | 1 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded mounting on cross member |3.1.9| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab/ drop sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached fixing loose (5.3.3 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep/dropsill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn bush bonding failed |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drop sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drop sill (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi near shocker (5.3.6 (a) (i)) | 1 |
| Outer Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp Both sides |1.1.A.3f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Steps and inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Steps and inner sills |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill at rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Floor above spring |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded INNER AND OUTER SILL |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner door step (7.1.1 (a) (i)) | 1 |
| Floor in such a condition it is likely to cause load insecurity or instability tipper floor (6.2.4 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Steering rack has had excessive heat applied |2.2.C.1e| | 1 |
| Nearside Front Ball joint fractured and unserviceable |2.2.C.1d| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 1 |
| Offside Rear Braking system leaking inside drum |3.6.A.1| | 1 |
| Offside Front Seat belt buckle not functioning as intended does not retract |7.1.2 |d|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various places |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various places |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various places |6.1.B.2| | 1 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc torn in two |2.5.C.1a| | 1 |
| Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings both inner arches |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Forward spring hanger inner /outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner outer sills (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer /inner sills (6.1.1 (c) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Forward spring hanger inner /outer sills (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded and holed (above axle ) (6.1.1 (c) (i)) | 1 |
| Inner Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Front Radius arm rubber bush deteriorated resulting in excessive movement rear bushes both sides marked 2 wise bone bushes |2.4.G.2| | 1 |
| passenger door cannot be opened from outside the vehicle bonnet have not checked inside |6.2.B.1c| | 1 |
| Steering damper leaking oil steering rack leaking power steering fluide |2.2.C.1f| | 1 |
| Emissions not tested due to excessive smoke |8.2.2.2 |e|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underbody sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underbody sill |5.3.6 |a| |i|| | 1 |
| Emissions not tested will not rev more than onese |7.4.B.1| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn loose on fixing (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting area (5.3.6 (a) (i)) | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) inner track rod joint (2.3 (a) (i)) | 1 |
| Central Exhaust system insecure mountings broken |6.1.2 |a|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill to chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side of step |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded flooring to outer body sill. |2.4.A.3| | 1 |
| Nearside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp all lamps not functioning correctly |1.2.1f| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp all lamps not functioning correctly |1.2.1f| | 1 |
| Direction indicators adversely affected by the operation of another lamp none functioning correctly |1.4.A.2h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear shackle areas badly corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber area |2.4.A.3| | 1 |
| Nearside Rear Shock absorbers damaged to the extent that it does not function |5.3.2 |b|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Step |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Sill |5.3.6 |a| |ii|| | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Both outer sills and offside rear inner lower quarter panel |2.4.A.3| | 1 |
| Offside Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger/floor/inner arch |5.3.6 |a| |i|| | 1 |
| Lower Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Lower Driver`s door hinge insecure and a piller cracked on check strap |6.2.B.2| | 1 |
| Driver`s door catch insecure cracked on b piller |6.2.B.2| | 1 |
| Offside Rear Rear wheel bearing has excessive play possible hub nuts loose |2.6.2| | 1 |
| Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing 2nd row |5.2.2a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel well |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel well |2.4.A.3| | 1 |
| Other passenger door cannot be opened from outside the vehicle sliding side door |6.2.3 |a|| | 1 |
| Driver`s seat backrest cannot be secured in the upright position. |6.2.5 |b| |ii|| | 1 |
| Front Upper Power steering pipe/hose leaking pipes to rack (2.1.5 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch panels/outer + inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger box section and inner arch panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis box section @ shock mounting |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Floor excessively deteriorated passenger step (6.2.4 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 1 |
| Nearside Front Sub-frame inappropriately repaired |2.4.A.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step sill (7.1.1 (a) (i)) | 1 |
| Parking brake inoperative on one side Both (1.4.1 (a)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill section |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing under wing (5.3.6 (a) (i)) | 1 |
| Parking brake inoperative on one side Both sides (1.4.1 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Outer sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Step area (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired Step area (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired Inner sill welding and cataloyed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Obligatory mirror missing mirror glass (3.3 (a)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg @ x2 places (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg @ x2 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings . |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near hanger (5.3.6 (a) (i)) | 1 |
| Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing & strut turret (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger to chassis |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Rear Additional braking device insecure |3.6.I.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle various areas each side of rail |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle various areas each side of rail |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and lower B pillar and step areas |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and lower B pillar and step areas |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area and out rigger |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill areas and outrigger |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings has hole. |6.1.B.2| | 1 |
| Nearside Rear Loading door cannot be secured in the closed position top latch brocken |6.4.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded floor and chassis |5.2.6| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Behind Spring (6.2.2 (d) (i)) | 1 |
| Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Steering rack gaiter missing or no longer prevents the ingress of dirt 2 sides |2.1.3 |g| |ii|| | 1 |
| Body has an unsafe modification tipper body excessively corroded |6.2.1 |d| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body |6.1.B.2| | 1 |
| Offside Dropside cannot be secured in the closed position hinge mountings excessively corroded |6.4.1| | 1 |
| Nearside Rear Direction indicators incorrect colour n/s light lens broken |showing white light to the rear| |1.4.A.2f| | 1 |
| Front Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Wishbone Rear Bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill Corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner + Outer Sill Corroded (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner + Outer Sill Corroded (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Wheel Arch Corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill Corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg X 3 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill join (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg (7.1.1 (a) (i)) | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Prop shaft bearing housing insecure rubber mount missing (6.1.7 (f) (i)) | 1 |
| Nearside Outline marker lamp not working most forward (4.2.1 (a) (ii)) | 1 |
| Prop shaft bearing excessively worn most forward (6.1.7 (b) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body has an unsafe modification @rear panel and wheel arch (6.2.1 (d) (i)) | 1 |
| Rear Anti-roll bar damaged and seriously weakened both sides (5.3.3 (b) (i)) | 1 |
| Nearside Front Sub-frame likely to become detached (5.3.3 (a) (ii)) | 1 |
| Rear Parking brake inoperative on one side both sides (1.4.1 (a)) | 1 |
| Nearside Front Lower Steering locking device insecure |2.2.C.1g| | 1 |
| Offside Rear Body component corroded and likely to cause injury Loading bed (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Loading bed (6.2.1 (a) (i)) | 1 |
| Offside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Rear Body insecure (6.2.2 (a) (i)) | 1 |
| Offside Front Brake hose twisted cut |3.6.B.4c| | 1 |
| Offside Front Headlamp insecure bulb |1.7.3| | 1 |
| Nearside Front Headlamp incorrect colour |4.1.4 |a|| | 1 |
| Offside Front Headlamp incorrect colour |4.1.4 |a|| | 1 |
| Centre Rear Lower engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount 3 areas| marked | |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mount area on outrigger | marked | |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mount area on outrigger | marked | |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis section at load sensing valve mountain point | marked | |1.1.21 |e| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above spring | marked | |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above spring | marked | |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mountain point |chalked| |2.4.A.3| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front chassis rail, outer face corroded. |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill... driver step. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis near shock mount |2.4.A.3| | 1 |
| Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers step panel upper/lower |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Nearside Front Front position lamp|s| missing top marker light |1.1.A.3a| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear hanger |2.4.A.3| | 1 |
| Centre Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |marked with chalk| |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |marked with chalk| |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step |marked with chalk| |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step|marked with chalk| |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Chassis leg |marked with chalk| |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner flich panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner flich panel |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer body sill |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded cab backing area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired in inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in inner wheel arch |2.4.A.3| | 1 |
| Offside Rear fog lamp not working replace bulb (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Outline marker lamp likely to become detached refit (4.2.1 (c) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached retighten nut |5.3.4 |a| |ii|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn Rear Bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Seat base corroded underfloor x 2 places |6.1.B.2| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release Seat belt stalk missing |5.2.5a| | 1 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced Headlamp broken/ Sharp edges |1.7.5a| | 1 |
| Nearside Rear Lower Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Offside Rear Lower Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Suspension component mounting prescribed area is excessively corroded all rear suspension |2.4.A.3| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt leaking |2.2.C.1c| | 1 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt split |2.4.G.2| | 1 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt split |2.4.G.2| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired L.S.V, mounting bent |3.6.E.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded and outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Outer Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury inner sill/step |6.2.1 |a| |i|| | 1 |
| Nearside Front Power steering component fouling gaitor |2.1.5 |e| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel |6.1.B.2| | 1 |
| Nearside Rear Inner Anti-roll bar linkage has excessive play in a pin/bush excess play |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired as marked |2.4.A.3| | 1 |
| Brake valve leaking Load valve (1.1.7 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing/turret area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing/turret area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Rear chassis areas |2.4.A.3| | 1 |
| passenger door hinge insecure side door isurcure |6.2.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded on under side of door step |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Drivers step within 30cm of seat mount |5.2.6| | 1 |
| Nearside Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view glass |8.1.2a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger front end of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger rear end of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger front end of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger rear end of spring |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working SIDE LIGHT |1.1.A.3b| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded + outer sill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded + outer sill |2.4.A.3| | 1 |
| Offside Front obligatory indirect vision device insecure door glass missing |8.1.1| | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed by rust |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component attachment bracket/mounting fractured axle spring saddle |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd from rear cross member |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i|| | 1 |
| Horn device not of a continuous or uniform sound |6.2.1e| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Offside Front coil spring inappropriately repaired |2.4.A.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded all out riggers |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded all out riggers |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os inner wing |6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings os door step |6.1.B.2| | 1 |
| Track rod end ball joint has excessive play ns |2.2.B.1f| | 1 |
| Braking system leaking rear wheel cylinders |3.6.A.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting also frront inner sill |6.2.2 |d| |i|| | 1 |
| Central Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Seat belt missing second row seat belt stalk missing (7.1.2 (a)) | 1 |
| Nearside Front Brake disc significantly and obviously worn badly scored (1.1.14 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases loose at joint and blowing (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front, centre and rear of inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front, centre and rear of inner wheel arch |5.3.6 |a| |i|| | 1 |
| Front Service brake lagging in operation uneven braking |1.2.1 |d|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner chassis leg inside engine bay |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of inner wheel arch/ end of inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of inner wheel arch/ end of inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre of inner sill not patch welded. filler used instead |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill not patch welded. filler used instead |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre of chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Body component damaged and likely to cause injury plastic wing top/side repeater panel missing exposing sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Vehicle structure has a modification which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front Engine Arm (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded cross member mounting |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near load sensing valve (6.1.1 (c) (ii)) | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
| Offside Rear Brake pipe inadequately clipped axle pipe |3.6.B.1| | 1 |
| Rear Outer Brake pipe inadequately clipped flexi to bracket |3.6.B.1| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear tailgate/cross members/floor and insecure load |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp emits a light other than red holed |1.3.2e| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab rear panel |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded cab rear panel |5.2.6| | 1 |
| All position lamps not working side markers |1.1.A.3b| | 1 |
| Nearside Side repeater lens defective such that the emitted light is adversely affected missing (4.4.1 (b) (ii)) | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction painted writing on offside (3.1 (a) (ii)) | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting across rear chassis |6.6.6| | 1 |
| Offside Rear Rear fog lamp emits a light other than red showing white light lens holed |1.3.2e| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Inner Wing marked in Yellow |2.4.A.3| | 1 |
| Offside Front Ball joint has excessive play Track rod End |2.2.B.1f| | 1 |
| Nearside Front Steering arm has relative movement at its fixings inner rack arm |2.2.B.1h| | 1 |
| Rear Prop shaft joint excessively worn U/J |6.1.7 |c| |i|| | 1 |
| Rear Prop shaft bearing excessively worn 2nd Bearing |6.1.7 |b| |i|| | 1 |
| Nearside Rear Body panel insecure arch panel (6.2.1 (a) (i)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety steering rack (8.4.1 (a) (ii)) | 1 |
| Rear Entrance/exit step in such a condition as to affect the stability of passengers during use (9.7 (a) (iii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger rear (5.3.6 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases blowing before it enters aftermarket DPF. |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill corroded and holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill corroded and holed |2.4.A.3| | 1 |
| Nearside Entrance/exit step insecure |6.1.E.1| | 1 |
| Nearside Mechanical brake component locking device missing |3.5.1l| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wing |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt outer ball joint |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill to wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis around bump stop area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis around bump stop area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner quarter panel area by rear spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner quarter panel area by rear spring rear mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and inner arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill to wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor area |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner arch to floor area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch to floor area |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wing on front chassis (6.2.2 (d) (i)) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture loose insercure (1.1.11 (a)) | 1 |
| Body insecure and dangerous to other road users bumper |6.1.B.1b| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel leak from engine |8.4.1 |a| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour repaired with tape |1.4.A.2f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 1/4 panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer 1/4 panel |2.4.A.3| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb fitted incorrectly |4.1.2 |c|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis under bonnet |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind wheel |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind wheel |6.1.1 |c| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced complete sill |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced complete sill |7.1.1 |a| |i|| | 1 |
| Front position lamp|s| not working both side |1.1.A.3b| | 1 |
| Prop shaft bearing excessively worn middle |6.1.7 |b| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded front inner sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front inner sill |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded mounting point |5.2.6| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 6 X welding required, all chalked. (6.1.1 (c) (i)) | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp fog, hazard lights, indicator & brake all interacting |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger - chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger - chalked |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch section |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near to spring hanger as marked |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near to spring hanger as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail holed around bump stop |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail around bump stop |6.1.B.2| | 1 |
| Nearside Front Lower Body has a sharp edge caused by corrosion outer sill and step section |6.1.C.1| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near to front sub frame mount |6.1.B.2| | 1 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill section as marked |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired not fully welded |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded side valance , rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill , front of rear wheel |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill , front of rear wheel |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near subframe mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Body has a projection caused by corrosion step |6.1.C.1| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting various holes length of the inner sill , front to rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis out rigger , near rear spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger near rear spring mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner rear arch to floor join corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner arch to floor join coroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Macpherson strut damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel box |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch has multiple holes |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed at upper spring mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg holed at front wheel arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg holed at engine mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch holed at top strut mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed x 2 places |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed x 2 places |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed at rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed beside rear cross member |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed beside forward spring hanger |6.1.B.2| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet area |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step area/sill |5.2.6| | 1 |
| Offside Front Upper Position lamp not working MARKER |4.2.1 |a|| | 1 |
| Brake load sensing valve linkage defective and function impaired SEIZED |1.1.17 |a|| | 1 |
| Brake load sensing valve linkage defective and function impaired INCOMPLETE |1.1.17 |a|| | 1 |
| Direction indicators flashing more than 120 times a minute nearside and offside |1.4.A.2g| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp flashes with indicator |1.1.A.3f| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp come on when side lights are turned on, unable to turn off |1.3.2f| | 1 |
| Central Statutory seat belt missing passenger seat |5.1.1| | 1 |
| Rear Electrical wiring damaged and bare wires exposed behind lamps |1.9.2c| | 1 |
| Rear Electrical wiring insecure behind lamps |1.9.2a| | 1 |
| Exhaust system not adequately supported exhaust clamp loose and leaking |7.1.1| | 1 |
| Nearside Front Inner Steering linkage ball joint has excessive play rack end (2.1.3 (b) (i)) | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal - inner |6.1.B.2| | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front to rear outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front to rear outer Sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis holed (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Position lamp adversely affected by the operation of another lamp all lights |4.2.3 |c|| | 1 |
| Rear Leaf spring shackle bracket damaged and seriously weakened |2.4.B.6d| | 1 |
| Rear Lower Leaf spring linkage pin not correctly positioned |2.4.B.3a| | 1 |
| Offside Rear Inner Body has a projection caused by corrosion SILL |6.1.C.1| | 1 |
| Centre Exhaust system not adequately supported insecure clamp worn |7.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under front wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at shocker mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis /outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength MIDDLE CHASSIS |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember and outriger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember and outriger |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing-chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x 3 |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member x 4 |6.6.6| | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded both arches |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger/rear-most inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger |fore-most inner arch| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outriggerear-most inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger-front of spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger-rear of spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor-inner arch right across |2.4.A.3| | 1 |
| Nearside Inner Front brake disc locking device insecure |3.5.1l| | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bush. (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D bush. (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush. (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush. (5.3.4 (a) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member under offside engine mount. (6.2.2 (d) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill area |6.1.B.2| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded step/sill area |5.2.6| | 1 |
| Offside Rear Body has a projection caused by corrosion mudflap insecure |6.1.C.1| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement lower rear bush |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt cv (6.1.7 (g) (ii)) | 1 |
| Front Fuel cap/sealing device component leaking engine area (6.1.3 (b) (i)) | 1 |
| Front Fuel system component leaking excessively or a risk of fire engine area (6.1.3 (b) (ii)) | 1 |
| Nearside Bonded suspension unit attachment loose |2.4.F.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x3 (5.3.6 (a) (i)) | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded end of sill area |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear inner sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill and step |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired sill section riveted |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/box sections/rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/box sections/rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward leaf spring mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward leaf spring mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis inner wing area |2.4.A.3| | 1 |
| Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Sub-frame modified and seriously weakened |2.4.A.2| | 1 |
| Power steering pipe/hose leaking into rack (2.1.5 (a)) | 1 |
| Outer Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear Inner Leaf spring anchor pin or bush excessively worn front bush has excessive play (5.3.4 (a) (i)) | 1 |
| Exhaust system not adequately supported Rear To Middle |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle mount |2.4.A.3| | 1 |
| Nearside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt lower joint |2.4.G.2| | 1 |
| Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt lower joint |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear mounting |2.4.G.2| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure rear bolt insucure |2.4.G.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner & outer sills |6.1.1 |c| |ii|| | 1 |
| Nearside Front Brake cable insecure |3.5.1d| | 1 |
| Nearside Rear Other passenger door cannot be opened from outside the vehicle side door (6.2.3 (a)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassie by the brake valve |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassie by the spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing too floor |2.4.A.3| | 1 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning device has operated (or gauge shows an unsafe reading) (1.1.3 (a) (ii)) | 1 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least four more brake applications after the warning device has operated (or gauge shows an unsafe reading) (1.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step to sill area |5.3.6 |a| |ii|| | 1 |
| Nearside Upper Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside rear outer sill arch section |6.1.B.2| | 1 |
| Nearside brake caliper leaking |3.6.A.1| | 1 |
| Nearside Front Front position lamp|s| not working centre side marker light |1.1.A.3b| | 1 |
| Offside Front Upper Brake pipe leaking master cylinder |3.6.A.1| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit plate value 0.68 |8.2.2.2 |a|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor pan |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear spring mount |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Front Front position lamp|s| not working roof light |1.1.A.3b| | 1 |
| Nearside Inner Front Horn not working |1.6.2a| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded nearside and offside chassis / outriggers shock mounts |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis various |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis various |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded nearside and offside outriggers various |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is inadequately repaired chassis incomplete weld |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch strut top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch strut top |2.4.A.3| | 1 |
| Nearside Front Lower brake caliper securing device loose |3.5.1j| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount / inner & outer sills |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting / inner & outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mounting / floor & surrounding area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mount chassis |5.3.6 |a| |i|| | 1 |
| Floor excessively deteriorated osr outer sill, osr inner quarter sill, nsr outer sill, ns inner sill, osr inner wheel arch (6.2.4 (a) (i)) | 1 |
| Rear Leaf spring seriously weakened both sides (5.3.1 (b) (i)) | 1 |
| Rear Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Seat belt buckle not functioning as intended wont release under tension? (7.1.2 (d)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal unions to rack leaking, oil leaking all down over crossmember. |2.3.3b| | 1 |
| Offside Rear Rear position lamp|s| not working TAILLIGHT |1.1.A.3b| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings LOWER REAR CAB MOUNTING CRACKED |6.1.B.2| | 1 |
| Nearside Front Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Nearside Indicator tell tale missing |1.4.A.2a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill. |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and rear spring mounting |6.1.B.2| | 1 |
| Nearside Rear Tailgate likely to become detached (6.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger |5.3.6 |a| |i|| | 1 |
| Offside rear brake recording little or no effort 98kg |3.7.B.5a| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis rail |2.4.A.3| | 1 |
| Offside Front All outline marker lamps not working roof |4.2.1 |a|| | 1 |
| Offside Front Seat belt buckle not functioning as intended passanger belt |7.1.2 |d|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet above sub frame both sides |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength above roll link mounting |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn D rubbers |5.3.4 |a| |i|| | 1 |
| Front Wheel bearing play so excessive it is likely to break up both |5.1.3 |a| |ii|| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills both sides |7.1.1 |a| |i|| | 1 |
| Nearside Front Hydraulic brake calliper inadequately mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail multiple places |6.1.1 |c| |i|| | 1 |
| Body panel likely to become detached rear panel |6.2.1 |a| |ii|| | 1 |
| Front Floor excessively deteriorated n/s & o/s step areas |6.2.4 |a| |i|| | 1 |
| Offside Leaf spring fractured spring eye |5.3.1 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced behind cab |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/cab |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step to outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a pin/bush Detached |2.4.G.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded In wheel arch |2.4.A.3| | 1 |
| Nearside Front Lower Front passenger seat insecure |6.2.3| | 1 |
| Rear Service brake lagging in operation both |1.2.1 |d|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis out rigger |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch and chassis - several places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner arch - incomplete weld |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch - incomplete weld |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both chassis |2.4.A.3| | 1 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings body under cab and chassis cracked along existing weld where chassis has previously snapped |6.1.B.2| | 1 |
| Nearside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings chassis is cracked along existing repair where chassis exits bodycab |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg has very large hole by subframe mount |2.4.A.3| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired part of load valve mechanism missing |3.6.E.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded roof of cab corroded and holed by seat belt mounting |5.2.6| | 1 |
| Nearside Rear Body has a projection caused by damage tailboard outer covering has split away from tailboard |6.1.C.1| | 1 |
| Offside Front Front suspension retaining device missing hub bolt broken off into flange |2.5.A.4| | 1 |
| Nearside Rear Anti-roll bar locating pin insecure mounting pin to roll-bar badly worn and requires replacement ,securing nut and washer for mounting pin missing - roll-bar to linkage position |2.4.G.3a| | 1 |
| Rear Floor excessively deteriorated load carrying area holed |6.2.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg above subframe mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg above subframe mounting corroded and holed |5.3.6 |a| |i|| | 1 |
| Body has a projection caused by corrosion both front wheel arches and nearside front wing |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper chassis |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper rear strenghthening |6.1.B.2| | 1 |
| Body component corroded and likely to cause injury offside front wheel arch / sill corroded |6.2.1 |a| |i|| | 1 |
| Body component corroded and likely to cause injury nearside front wing |6.2.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wing |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis |5.3.6 |a| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside front tipper chassis |6.2.2 |d| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside front floor excessively corrded |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear cab panel |5.2.6| | 1 |
| Spare wheel carrier insecure crossmember badly corroded |6.4.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in engine compartment |6.1.A.1| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn REAR BUSH |5.3.4 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s inner and outer sills |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s/r chassis rails underside of bump stops |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s/r chassis outriggers |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis cross piece |6.1.1 |c| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S front inner arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S and O/S rear cross member |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most out rigger |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded panel |2.4.A.3| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded rear cab floor |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind whel 2 places |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded behind shocker |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp when indicator on |1.1.A.3f| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush both d mounts bushes |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in arch 3 places |6.1.B.2| | 1 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded flank |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded flank |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded arch front |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill / sill end |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill end |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis member/floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill after wheel |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Prop shaft flexible coupling excessively deteriorated both prop mounts (6.1.7 (d) (i)) | 1 |
| Front Brake pedal anti-slip provision loose |3.3.A.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in range of 30 cm from seat mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in range of 30 cm from seat mounting |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength front mounting |2.4.A.3| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings backing sill |6.1.B.2| | 1 |
| Nearside brake drum insecure |3.5.1i| | 1 |
| Offside brake drum insecure |3.5.1i| | 1 |
| Brake load sensing valve defective and function impaired actuator missing |3.6.E.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body as marked |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner outer rear x member |6.1.B.2| | 1 |
| Rear wheel bearing rough when rotated Both sides |2.6.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage Light lens |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch to floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outrigger at rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outrigger at front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outrigger at front of spring. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear of inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear of inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front of inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer wheel arch |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 8.66 |8.2.2.2 |a|| | 1 |
| Brake cable insecure broken |1.1.15 |c|| | 1 |
| Offside Anti-roll bar has excessive play in a pin/bush D-BUSH |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis in engine bay corroded and holed |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis and outrigger to passenger door step holed.also door step holed throughout its length |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded main chassis holed at offside rear tie rod mounting |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis holed in wheel arch on main chassis member |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| incorrect colour lens holed |1.1.A.3e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/chassis |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp indicator |1.1.A.3f| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch holed within 30cm of engine mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis holed above subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step holed at front of step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of spring mount holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring mount holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounts holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis holed within shock mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed front and rear within suspension mount areas (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced O/S/F inner sill and step area. |7.1.1 |a| |i|| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view both sides |8.1.2a| | 1 |
| Body has a sharp edge caused by damage o/s mirror cover missing |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion n/s/r wheel arch |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Wheel arch. |6.1.C.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Cross member. |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill. |2.4.A.3| | 1 |
| Offside Front Front drive shaft coupling bearing fastener fractured |2.5.C.2b| | 1 |
| Prop shaft bearing housing insecure Centre mount (6.1.7 (f) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis leg next to engine mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail next to leaf spring hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail rear spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail corroded near leaf spring mount (6.1.1 (c) (i)) | 1 |
| Brake prescribed area is excessively corroded load sesning valve area (1.1.21 (e) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced all rear crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle of van chassis rails corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leaf spring mount (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch next to gearbox mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in front of shock absorber |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in front of shock absorber |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis / out rigger |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing /floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing / floor |2.4.A.3| | 1 |
| Exhaust emits excessive smoke or vapour of any colour not tested |7.4.B.4| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting mounting front of axle. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting mounting behind axle. (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting mounting behind axle. (6.2.2 (d) (i)) | 1 |
| All position lamps not working no front, rear or numberplate lights |1.1.A.3b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch and inner wing |6.1.B.2| | 1 |
| Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement both rear upper & lower bushes |2.4.B.2| | 1 |
| rear brake recording little or no effort both rears |3.7.B.5a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS AT LEAF SPRING MOUNT |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS AT LEAF SPRING MOUNT |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired AT SPRING MOUNT |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS AT REAR SHOCK MOUNT |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AT FRONT OF REAR LEAF SPRING MOUNT |2.4.A.3| | 1 |
| Central Brake valve leaking |3.6.A.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on chassis leg |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger and tow bar area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger and tow bar area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Nearside Front Body component corroded and likely to cause injury inner arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Body has a projection caused by corrosion Foot step inner and outer sill |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Foot step inner and outer sill |6.1.B.2| | 1 |
| Centre Fuel hose leaking |6.7.1a| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer and inner sills |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Inner Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/floor shock area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/floor shock area |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at wheel arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at bump stop |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing at engine mount |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded door /sill area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis under brake servo (5.3.6 (a) (i)) | 1 |
| Nearside Front Fuel tank insecure strap fixing corroded (6.1.3 (a) (i)) | 1 |
| Nearside brake disc cracked |3.5.1h| | 1 |
| Front suspension has excessive play in a lower suspension ball joint o/s |2.5.B.1a| | 1 |
| Offside Body has a sharp edge caused by damage mirror backing missing |6.1.C.1| | 1 |
| Direction indicators adversely affected by the operation of another lamp all four sides |1.4.A.2h| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s rear spring mount area (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s rear, front spring mount area (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s rear chassis (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s rear floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill into wheel arch floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill into wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s rear chjassis |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.1 |c| |ii|| | 1 |
| Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Other passenger door likely to open inadvertently or not remain closed in the case of a sliding door (6.2.3 (b) (i)) | 1 |
| Shock absorber detached |2.7.2b| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately clipped to master cylinder |3.6.B.1| | 1 |
| Offside Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement Rear bush |2.4.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings top under bonnet |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under vehicle |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing of suspension mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar missing drop link |2.4.G.1| | 1 |
| Front Front position lamp|s| adversely affected by the operation of another lamp brake lights |1.1.A.3f| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quater |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quater |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings quarter to chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings arch to floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings arch to floor |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring hanger front to chassis |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor to chassis |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint wishbone |2.4.G.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hole and corroded front to rear |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hole and and corroded front to rear |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear rear near chassis hole and corroded |6.1.B.2| | 1 |
| Offside Inner Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Outer Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| front eye mountain point |2.4.B.1b| | 1 |
| Brake valve insecurely mounted chassis mountain point |3.6.A.2a| | 1 |
| Front Exhaust has a major leak of exhaust gases joint loose |7.1.2| | 1 |
| Nearside Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg at shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outersill front |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outersill rear |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outersill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings undersill |6.1.B.2| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill / doorstep |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced two places |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at centre section |6.2.2 |d| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear section |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting undersill at centre section |6.2.2 |d| |i|| | 1 |
| Offside Drive shaft bearing excessively worn |6.1.7 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under seat |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and o/s/rear front mounts |2.4.A.3| | 1 |
| Nearside Vehicle structure is deformed and structural rigidity is significantly reduced fuel tank mounting point (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre seal (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre seal near fuel filler (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner seal (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp not working on dipped beam faulty bulb main beam insead of dip |1.7.5a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both front floor pans |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch/floor pan |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is inadequately repaired complete sill
|2.4.A.3| | 1 |
| Brake pedal anti-slip provision worn smooth pedal rubber |3.3.A.1b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear inner |2.4.A.3| | 1 |
| Rear Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings to rear sill |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings to rear sill |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings to rear sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind the wheel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured rear |5.3.1 |b| |i|| | 1 |
| Rear Floor excessively deteriorated flat bed |6.2.4 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut housing |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front to rear inner and outer see marked area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front to rear inner and outer see marked areas |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outriggers |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch see marked areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under arch see marked areas |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded 1/4 panel |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring mounting anchor and shackle |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Xmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Xmember (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Turret (5.3.6 (a) (i)) | 1 |
| Power steering pump drive system defective Drive belt split |2.3.6| | 1 |
| Nearside Front Lower Seat belt obviously repaired |5.2.2c| | 1 |
| Rear Brake valve leaking load valve |3.6.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front & rear of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front & rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger, close to front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan, close to upper shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan, close to upper shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan, close to rear spring mount |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear crossmember |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floorpan, next to seat mounting |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floorpan, next to seat mounting |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure is deformed and structural rigidity is significantly reduced Chassis rail, near fuel tank |6.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 1 |
| Nearside Front Direction indicators obviously incorrectly positioned |1.4.A.2b| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Exhaust has a part missing |7.1.1a| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bearing both rear |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D bush worn |2.4.G.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bolt joint |2.4.G.2| | 1 |
| Nearside Inner Rear Lower Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both sill corroded |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg by brake load valve |2.4.A.3| | 1 |
| Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides suspension turrets |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both sides front mounting point badly corroded on chassis inner and outer sill |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both sides shackle mounts, chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced very bad |6.1.1 |c| |i|| | 1 |
| Brake pedal anti-slip provision worn smooth worn through |3.3.A.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis - above axle |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides box sections |2.4.A.3| | 1 |
| Direction indicators adversely affected by the operation of another lamp both rear |1.4.A.2h| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded high pressure from pump to rack |2.3.2| | 1 |
| Offside Rear Front position lamp|s| not working off side rear side marker |1.1.A.3b| | 1 |
| Nearside Rear Front position lamp|s| not working near side rear side marker |1.1.A.3b| | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users & reflector insecure |1.8.A.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle end |2.4.A.3| | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member / chassis |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area within shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member bumper mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area within shackle mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |outer sill| within leaf spring front mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch area within upper shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch area within upper shock mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is fractured wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill below side loading door |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |near rear spring mount| |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear sill and wheel arch,
Offside outer sill ,
Nearside outer sill,
Rear crossmember,
Both rear inner quarters,
Nearside front inner wheel arch,
Offside rear box section,
Nearside rear inner wheel arch. (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Both inner sills (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded Below top mount....holed |2.4.A.3| | 1 |
| Offside Inner Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner /outer sill areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger/ inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor around spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor around spring hanger |2.4.A.3| | 1 |
| Nearside Rear Leaf spring fractured snapped |2.4.B.1a| | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury excess corroded |6.2.8 |b|| | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury excess corrosion |6.2.8 |b|| | 1 |
| Nearside Front Inner Sub-frame corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Offside Front Inner Sub-frame corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Offside Front Inner Sub-frame corroded and seriously weakened wing |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill
|5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by suspension mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill middle (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch to floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner and outer sill and rear wheel arch |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded centra inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear |5.3.4 |a| |i|| | 1 |
| Nearside Wheel stud|s| missing |4.2.A.1e| | 1 |
| Offside Front Lower Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Seat belt locking mechanism does not secure or release last row |5.2.5a| | 1 |
| Centre Front Seat belt retracting mechanism defective first row |5.2.5b| | 1 |
| Offside Seat belt retracting mechanism defective second row |5.2.5b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Fuel system component leaking at pump |7.2.3| | 1 |
| Nearside Towbar component excessively damaged |6.6.1| | 1 |
| Exhaust has a major leak of exhaust gases mid box |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis + floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis / floor + inner wing |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded this vehicle has excess corosion on underside of vehicle too much to document |2.4.A.3| | 1 |
| Offside Front Leaf spring eye defective |anchor| front |2.4.B.1b| | 1 |
| Offside Braking system leaking caliper |3.6.A.1| | 1 |
| Exhaust system not adequately supported rear mount |7.1.1| | 1 |
| Nearside Rear Floor insecure wheel arch (6.2.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced back of step (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step at floor |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis section and body |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted chassis shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis - shocker mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor sill - step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor - inner wing |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area to floor |6.1.B.2| | 1 |
| Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Rear Fluid leaking continuously posing a serious risk to road safety wheel (8.4.1 (a) (ii)) | 1 |
| Emergency exit door cannot be opened from outside the vehicle side door |6.2.D.1a| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tow bar |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings seat |6.1.B.2| | 1 |
| Rear Anti-roll bar cracked |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg behind rear wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in front of rear wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassiss leg in front of rear wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg behind rear wheel |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing 3 places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear of spring |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded by front of rear spring |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded by front of rear spring |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded of rear spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded of rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner panel and cross member |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded underside of step |2.4.A.3| | 1 |
| Front Fuel tank insecure mounting corroded |7.2.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step to sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded support panels |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded o/s front chassis corroded within subframe mounting. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pans corroded within seat belt anchor points. |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear outer sills corroded within suspension components. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill corroded within suspension components. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear quarter panel to rear chassis/valance corroded. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to floor pan corroded within suspension components. |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s&o/s front steps & o/s chassis leg |5.2.6| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp Both |1.1.A.3f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill Panel |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Sill Panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis near leaf spring carrier |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under wheelarch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Under Wheelarch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring moutning |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at rear axle |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 1nner sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor and inner sill |5.2.6| | 1 |
| Offside Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt wishbone |2.4.G.2| | 1 |
| Seat belt retracting mechanism defective center seat belt not retracting / extending. (7.1.2 (e)) | 1 |
| Bonnet primary retaining device excessively deteriorated bonnet will not open - not inspected engine bay. (3.1 (c)) | 1 |
| Prop shaft bearing excessively worn front prop support bearing worn to excess, rear support bearing badly worn. (6.1.7 (b) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side RH parking brake low effort. (1.4.1 (a)) | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn prop mount |2.4.G.4d| | 1 |
| Exhaust has a major leak of exhaust gases rear silancer |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in 3 places around rear spring hanger mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill 2 places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear panel out rigger
|2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch-sill |2.4.A.3| | 1 |
| Offside Front Lower Drivers door hinge insecure (6.2.3 (c) (ii)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to step (6.1.1 (c) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear most X member (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre X member (5.3.6 (a) (i)) | 1 |
| Front Prop shaft joint excessively worn Uj. "2nd one down (6.1.7 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill / step holed with in 30cm |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/ step holed |5.2.6| | 1 |
| Outline marker lamp not working Both NS & OS X2 each side (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp lens seriously defective (4.2.1 (b)) | 1 |
| Oil leaking excessively from engine level also below dipstick (8.4.1 (a) (i)) | 1 |
| Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced propshaft bearing bracket holed and weak (6.1.1 (c) (i)) | 1 |
| Nearside Rear Fluid leaking continuously posing a serious risk to road safety hub seal leaking and has contaminated brakes (8.4.1 (a) (ii)) | 1 |
| Nearside Rear Brake lining(s) contaminated shoes (1.1.13 (b)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced holes on rear butt chassis |6.1.1 |c| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab back |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage likely to become detached in the event of a collision cab back |7.1.1 |a| |ii|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength extensive corrosion to n/s and o/s rear chassis and outriggers adjacent to spring hangers |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength extensive corrosion to n/s and o/s front chassis and inner wheel arches adjacent to suspension mountings. |5.3.6 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked
|6.1.B.2| | 1 |
| Nearside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember near rear spring mount |6.1.1 |c| |i|| | 1 |
| Nearside Rear Position lamp missing |4.2.1 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTRIGGER |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/S INNER SILL |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR WHEEL ARCHES/SUSPENSION PRESCRIBED AREA |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER CHASSIS |5.3.6 |a| |i|| | 1 |
| Suspension component ball joint excessively worn BOTH SIDES |5.3.4 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired TOO LOOSE |1.1.17 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |near engine mount| |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch near step |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |near load valve| |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded middle out rigger |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch |near step| |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch | near strut top| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valance to chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded valance to chassis leg |2.4.A.3| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings FRONT TO REAR |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings O/S/ FRONT TO REAR |6.1.B.2| | 1 |
| Fuel tank insecure straps broken |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill and arch |2.4.A.3| | 1 |
| Nearside Front Obligatory mirror seriously obscured affecting the rear view mirror lens broken |8.1.2a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DOOR STEP |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DOOR STEP |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL ARCH |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings LEAF SPRING MOUNT |6.1.B.2| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced floor step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened front of spring |5.3.1 |b| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inner wheel arch |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |engine mounting| |6.1.A.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill to b pillar |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded silll to floor |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger shackle mount |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit plate value 1.22 (8.2.2.2 (a)) | 1 |
| Prop shaft bearing excessively worn center bearing rubber perrished. (6.1.7 (b) (i)) | 1 |
| Hazard warning lamps inoperative only working on nearside. (4.4.1 (e)) | 1 |
| Offside Front Lower Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Front Upper Outline marker lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury body sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury body sharp edges (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body component likely to become detached rear wheel arch (6.2.1 (a) (ii)) | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour lens broke |1.1.A.3e| | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step in more than one place (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail in more than one place by rear shackle mounting (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member on nearside by shackle mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch in more than one place (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake lagging in operation on application and release (1.2.1 (d)) | 1 |
| Nearside Front Seat belt installation anchorage insecure (10.1 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel box section by rear shackle mounting point (5.3.6 (a) (i)) | 1 |
| Body component insecure bonnet unable to be locked in the closed position (6.2.1 (a) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp affected by fog lamps which also light up nearside reversing lamp (4.4.3 (b)) | 1 |
| Offside Front Service brake excessively binding holding on for a number of seconds after being released (1.2.1 (f)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Wheel nut|s| loose marked in yellow |4.2.A.1e| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing area |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing area |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint detached |2.4.G.2| | 1 |
| Statutory seat belt missing buckle |5.1.1| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light rear lens cracked |1.2.1e| | 1 |
| Nearside Front Obligatory mirror missing side mirror |8.1.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Headlamp not working on dipped beam both front dip beams not working. (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded by suspension component. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis corroded by suspension component. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis corroded by suspension component. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step corroded by suspension component. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded top of chassis corroded by brake load sensing valve mounting. (1.1.21 (e) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear chassis top of chassis corroded by suspension. (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch/step (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step inside door (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Hydraulic fluid leaking excessively Steering rack (8.4.1 (a) (i)) | 1 |
| Offside Front front parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Centre Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked by leaf spring hanger and wheel arch |6.1.B.2| | 1 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked by leaf spring hanger, wheel arch and rear out rigger |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked by step, wheel arch and mounting points |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked by step, wheel arch and mounting points |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step sill (7.1.1 (a) (i)) | 1 |
| Nearside Outer passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear panel holed and corroded to excess |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis outrigger holed and corroded to excess |2.4.A.3| | 1 |
| Nearside Macpherson strut insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced x 2 places (7.1.1 (a) (i)) | 1 |
| Nearside Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Side repeater incorrect colour lens missing |1.4.A.2f| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced fender (6.1.1 (c) (i)) | 1 |
| Front Fuel tank insecure strap (6.1.3 (a) (i)) | 1 |
| Central Drive shaft joint excessively worn (6.1.7 (c) (i)) | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger @ rear of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger @ front of wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of wheel |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor panel |7.1.1 |a| |i|| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury step-box section holed-weak |6.2.8 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis-leaf spring Rear Mount |5.3.6 |a| |i|| | 1 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted seized |1.1.17 |b|| | 1 |
| Offside Front Service brake excessively binding binding |1.2.1 |f|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Above axel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Above axel |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill near centre (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step underside (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step underside (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner centre sill to rigger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner rear sill to rigger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill rigger rear (6.2.2 (d) (i)) | 1 |
| Nearside Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor area around seat |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded seat mounting floor area |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded floor by handbrake lever |3.1.9| | 1 |
| Brake performance not tested due to burst leaking brake pipe |3.7.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor around seat |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor to step under seat |5.2.6| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Brake slack adjuster incorrectly adjusted |1.1.18 |a|| | 1 |
| Offside Lower Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Front Lower Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a ball joint x 2 |2.4.G.2| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step/sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing as marked |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innerwing as marked |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member as marked |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill marked |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre outer sill marked |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to rear inner sill marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked |6.1.1 |c| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing as marked |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded panel as marked |2.4.A.3| | 1 |
| Prop shaft bearing excessively worn rear propshaft support bearing rubber excessively worn (6.1.7 (b) (i)) | 1 |
| Centre Drive shaft uj which forms part of the suspension has a loose flange bolt prop |2.4.G.4c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sillnext to spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill next to spring mounting |2.4.A.3| | 1 |
| Front Fuel tank insecure fuel tank strap broken, |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mnost inner sill |5.3.6 |a| |i|| | 1 |
| brake disc inappropriately repaired |3.5.1n| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |under bonnet| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis |under bonnet| |2.4.A.3| | 1 |
| Nearside Front Steering linkage insecure to the extent there is excessive movement at the mountings steering arm |2.1.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced between spring mounts (6.1.1 (c) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Bonnet primary retaining device ineffective Bonnet does not open not allowing full inspection (3.1 (c)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole within 30cm of rear leaf spring mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Corrosion holes on repair (6.1.1 (d) (i)) | 1 |
| Offside Rear Oil leaking excessively from transmission hub (8.4.1 (a) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis plate (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis plate (6.1.1 (c) (i)) | 1 |
| Nearside Rear Stop lamp(s) light intensity significantly reduced wrong bulb (4.3.3 (a) (ii)) | 1 |
| Rear Electrical wiring insecure and connectors likely to become disconnected tow bar (4.11 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis between spring hangers |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced inner wheel arch (6.1.1 (a) (i)) | 1 |
| Prop shaft bearing excessively worn rear-most |6.1.7 |b| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt and slight play in the ball joint |2.4.G.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by the front of the leaf spring |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by the nearside front inner wing rear of |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on the inner wing at the rear of the inner wing cross member |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch cross member rear of the arch |6.1.B.2| | 1 |
| Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt O/S |6.1.7 |g| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced N/S INNER & OUTER SILL |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced O/S INNER & OUTER SILL |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S OUTER SILLS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S INNER SILLS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S INNER ARCHES TO FLOOR |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S REAR CHASSIS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S REAR OUT RIGGERS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S CENTRE OUTRIGGERS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S FRONT OUTRIGGERS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S FRONT INNER ARCHES |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S FRONT INNER WINGS TO CHASSIS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/S FRONT CHASSIS |5.3.6 |a| |i|| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded O/S CENTRE CHASSIS |1.1.21 |e| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BODY HOLED (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP HOLED (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP HOLED (6.1.1 (c) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired INCOMPLETE (1.1.17 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTRIGGERS (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTRIGGERS (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded by shocker leg |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering NS Sill |6.1.A.1| | 1 |
| Front Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Rear Upper Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering cab step |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering cab step |6.1.A.1| | 1 |
| Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering cross member 2 off |6.1.A.1| | 1 |
| Speedometer not complete |6.7.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing [strut top] |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch near leaf spring hanger |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing [strut top] |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner sill and step |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill, marked with chalk |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, marked with chalk |5.3.6 |a| |i|| | 1 |
| Front Windscreen wiper blade deteriorated |6.1.2| | 1 |
| Nearside Front Passenger door cannot be opened from inside the vehicle |6.5.11a| | 1 |
| Nearside Rear Passenger door cannot be opened from inside the vehicle |6.5.11a| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill corroded in 2 places |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill[out rigger area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount[rear] |2.4.A.3| | 1 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint bottom ball joint |2.5.B.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail corroded[behind wheel] |6.1.B.2| | 1 |
| rear brake recording little or no effort O/S and N/S |3.7.B.5a| | 1 |
| Nearside Front Front passenger door catch insecure flap |6.2.B.2| | 1 |
| Offside Inner Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger both sides |6.1.B.2| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings door steph |6.1.B.2| | 1 |
| Offside Rear Brake pipe kinked on axle |3.6.B.2b| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` sun strip in swept area of wiper blades |8.3.1e| | 1 |
| Nearside Front Front wheel bearing has excessive play slight roughness also |2.5.A.3c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top of chassis leg by inner wing/bulkhead |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis as marked |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step floor as marked |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded inner arch as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch as marked |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch as marked x3 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by box mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch back of shock as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back of bumper as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back of bumper as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer chassis as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on body to chassis back of spring as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by front off spring as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by front of spring as marked |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering chassis leg has been filled with fiberglass filler |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded back of spring as marked |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Front Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door stop holed within 30cm of seatbelt anchorage |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear position lamp|s| incorrect colour lens cracked showing white light |1.1.A.3e| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings number 1 x-member from front |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings number 4 x-member from front |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings number 5 x-member from front of vehicle |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded cab floor to chassis rail |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded engine bay in front of engine mount |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded side of chassis rail behind gearbox mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail between two susp mounts |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OS of front susp mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded ns of susp mount |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of leaf |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of leaf |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Center exhaust |7.1.2| | 1 |
| Offside Front Road wheel bead rim badly distorted inner rim |4.2.A.1a| | 1 |
| Stop lamp|s| switch with a delay in operation switch insecure |4.3.2 |a| |ii|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit of 1.19 |8.2.2.2 |a|| | 1 |
| Offside Front suspension has excessive movement at a suspension ball joint loose in carrier |2.5.A.1c| | 1 |
| Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced ns/os inner sills corroded/holes |7.1.1 |a| |i|| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded within 30cm of suspension mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded within 30cm of suspension mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corroded within 30cm of rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded within 30cm of suspension spring hanger |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded seat area cab area |5.2.6| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded anti roll bar fixing |2.4.A.3| | 1 |
| Central Seat belt buckle damaged (7.1.2 (d)) | 1 |
| Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Rear Leaf spring anchor pin or bush excessively worn N/S and O/S (5.3.4 (a) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction crack in screen (3.1 (a) (ii)) | 1 |
| Nearside Front Ball joint has excessive play BOTTOM |2.2.B.1f| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FRONT TO REAR |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FRONT TO REAR |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CORNER |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CORNER |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings UNDER BUMPER |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills and rear of leaf springs |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills and rear of leaf springs |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount area and inner arch |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired cardboard |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount area-floor |5.3.6 |a| |i|| | 1 |
| Rear Service brake imbalanced across an axle 52% |1.2.1 |b| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of cab near seats area corrosion |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/front step area and floor area holed rusty |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/front step area holed rusty and chassis panel |6.1.B.2| | 1 |
| Parking brake lever ratchet mechanism is excessively worn handbrake cable worn |3.1.5| | 1 |
| Rear Brake valve leaking Load sensing valve (1.1.7 (d) (i)) | 1 |
| Nearside Rear Hand operated control valve control cannot be moved over its full travel |3.2.1c| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp with indicator |1.2.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cargo floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Outline marker lamp not working roof lamp |4.2.1 |a|| | 1 |
| Offside Front Outline marker lamp not working roof lamp |4.2.1 |a|| | 1 |
| Horn sound not in accordance with requirements not loud enough |7.7 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wing/strut mount area |5.3.6 |a| |i|| | 1 |
| Offside Headlamp not working on dipped beam plug connection into lamp (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam plug connection on headlight (4.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper and lower inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wing (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement tempory cap |7.2.4b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced two holes nearside front close to cross member |6.1.1 |c| |i|| | 1 |
| Nearside Rear Upper passenger door catch missing |6.2.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cm of shock mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring 30cm (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring 30cm (5.3.6 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arche (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shock absorber |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp all light up when applying foot brake |4.2.3 |c|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s step |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner and outer sill |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s chassis by leaf spring anchor point |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassis n/s o/s |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner wheel arches and boot floor joint |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre drop sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre drop sill |6.1.B.2| | 1 |
| Fuel tank insecure tank strap rotten |7.2.1| | 1 |
| Stop lamp(s) all not working check fuse and stop switch. (4.3.1 (a) (iii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near subframe (6.2.2 (d) (i)) | 1 |
| Offside Parking brake inoperative on one side needs adjusting (1.4.1 (a)) | 1 |
| Vehicle structure has damage which adversely affects braking or steering chassis holed rear bar tow bar |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering chassis passenger side middle by axle |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering passenger sill outer |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rear both sides |6.1.A.1| | 1 |
| Stop lamp adversely affected by the operation of another lamp passenger |1.2.1f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis engine bay |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mounts |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mounts |6.1.B.2| | 1 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings cracked |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Offside Rear Axle with loose fixing bolts u bolts loose on o/s rear (5.1.1 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear of the spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake valve inadequately mounted lsv not secure to frame (1.1.7 (c)) | 1 |
| Offside Rear Position lamp showing white light to the rear reverse light stuck on (4.2.3 (a) (ii)) | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing meets chassis. |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing meets chassis. |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger front of spring hanger & rear of spring hanger in several places. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring hanger & rear spring hanger in several places. |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded NSR chassis rail by rear spring shackle. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded NSR chassis rail by forward spring shackle. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded NSR inner sill. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OSR chassis rail/outrigger. |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded OSR floor near wheel arch. |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded OSF inner wing/strut tower. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded NSF inner wing. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded NSF chassis rail. Inside wheel arch. |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outrigger at front mount of rear spring |2.4.A.3| | 1 |
| Braking system leaking reservoir master cylinder area |3.6.A.1| | 1 |
| Bonnet retaining device ineffective missing |8.4.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside front engine mount |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Footwell |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Spring mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shock mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount |6.1.B.2| | 1 |
| Centre Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Nearside Front Direction indicator not working repeater light (4.4.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working center marker light (4.2.1 (a) (ii)) | 1 |
| Offside Rear Fluid suspension unit damaged and likely to fail |2.4.D.1b| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring front mount |6.1.1 |c| |i|| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounts (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded top and bottom of chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mount on chassis out rigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear mount on chassis outrigger |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch and front chassis leg by bulk head |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch and front chassis leg by bulk head |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded floor to wheel arch and rear cross member and chassis leg |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded rear cross member , floor pan to wheel arch and chassis leg |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour lens broken admiting white light |1.4.A.2f| | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated Prop uj (6.1.7 (d) (i)) | 1 |
| Nearside Front Suspension component ball joint excessively worn Dust covers split also (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component ball joint excessively worn Dust cover split also (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D rubber (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D rubber (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis above subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner +outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner + outer sill |5.2.6| | 1 |
| Offside Rear Braking system leaking PIPE |3.6.A.1| | 1 |
| Bonnet retaining device excessively deteriorated UNABLE TO GAIN ACCESS TO UNDER BONNET |8.4.2| | 1 |
| Offside Front Upper Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced close to sub frame mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front outrigger to inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting outrigger to sill (5.3.6 (a) (i)) | 1 |
| Nearside Cab steps in such a condition that it is likely to cause injury corroded (6.2.8 (b)) | 1 |
| Offside Cab steps so insecure it is likely to cause injury corroded (6.2.8 (a) (ii)) | 1 |
| Central Prop shaft bearing housing insecure rubber bonding adrift (6.1.7 (f) (i)) | 1 |
| Nearside Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strutt top mounting area (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger cracked along weld (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section to floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember, rear spring mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember, rear spring mounting area |5.3.6 |a| |i|| | 1 |
| Brake prescribed area is excessively corroded nearside rear chassis at load sensing valve |1.1.21 |e| |i|| | 1 |
| Nearside Front Sub-frame insecurely attached front bolt loose |5.3.3 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill back corroded at seat belt mounting (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section and rear cross member at leaf spring rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section and rear cross member at leaf spring rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis box section under servo |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced entire inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength hole visible (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength hole visible (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength hole visible (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength hole visible (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Steering column flexible coupling has excessive play |2.1.5| | 1 |
| Nearside rear brake recording little or no effort 100 kg no lock |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort 130 kg no lock |3.7.B.5a| | 1 |
| Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above propshaft |6.1.B.2| | 1 |
| Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above fuel tank |6.1.B.2| | 1 |
| Front Upper Seat belt anchorage prescribed area is excessively corroded near propshaft |5.2.6| | 1 |
| Front Sub-frame inappropriately repaired |2.4.A.2| | 1 |
| Rear Electrical wiring insecure and connectors likely to become disconnected All rear wiring (4.11 (a) (ii)) | 1 |
| Nearside Rear Body mounting fixings insecure such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
| Offside Rear Body mounting fixings insecure such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in the wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative Compensator |1.1.17 |c| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cm of the rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cm of the rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired Sill,30cm of the leaf spring front mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis,30cm of the shock absorber top mounting |5.3.6 |a| |i|| | 1 |
| Bonnet primary retaining device ineffective does not open |3.1 |c|| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced inner wing |6.1.1 |a| |i|| | 1 |
| Offside Rear Leaf spring anchor bracket bolt missing |2.4.B.6c| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded nearside front inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded nearside rear sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis cross member |2.4.A.3| | 1 |
| Stop lamp not working all |1.2.1b| | 1 |
| Direction indicator adversely affected by the operation of another lamp both |1.4.A.2h| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded rear spring hangers holed and corroded |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassie holed several places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded cross member holed |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor holed |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage loose Stalk not fixed to floor or seat |7.1.1 |b|| | 1 |
| Offside Front Road wheel fixing missing Stud sheared and nut missing |5.2.1 |a| |i|| | 1 |
| Nearside Rear Outline marker lamp missing Body 2,200 mm across headboard (4.2.1 (a) (ii)) | 1 |
| Offside Rear Outline marker lamp missing Body 2,200mm across headboard (4.2.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Passenger step / inner sill , marked (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember by spring eye , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of crossmember by spring eye , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired Cab floor to rear of seat , bolted repair panel (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill / outrigger , cooroded & holed . Outrigger has stress fractures on lower face , marked (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bulkhead inner face above front subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg in engine bay |6.1.B.2| | 1 |
| Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near foot step + outer sill corrorded |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side inner wheel arch corrorded |6.1.B.2| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn upper and lower (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn upper and lower (5.3.4 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit plate limit 0.75 result 2.51 (8.2.2.2 (a)) | 1 |
| Rear Axle has inadequate clearance with the bump stop missing o/s & n/s |2.4.A.1a| | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting to spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill from front foot step to rear wheel arch |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings from front foot step to rear wheel arch |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill all from front to rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill from front to rear |6.1.B.2| | 1 |
| Nearside Steering arm has relative movement at its fixings rack end |2.2.B.1h| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above the rear axle |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above the rear axle |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Lower door step (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-lock braking system component excessively damaged ring |3.4.2| | 1 |
| Offside Front Lower Cab steps in such a condition that it is likely to cause injury corroded |6.2.8 |b|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch Close To Chassis |6.1.1 |c| |i|| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced Both sides inner and outer sills (7.1.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By the probshaft front mount on shaccis rail (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both sides inner wheel arches (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre crossmember |6.1.B.2| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Complete sill area (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Complete sill area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis legs both sides (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing outer chassis next to sub frame and front bumper (5.3.6 (a) (i)) | 1 |
| Central Rear Brake pipe likely to become detached or damaged main pipes clip broken (1.1.11 (d) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and chassis box section |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Nearside Front Position lamp not working 501 bulb (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of leaf spring |2.4.A.3| | 1 |
| Brake performance not tested Unable to move vehicle |3.7.A.1| | 1 |
| Emissions not tested Unable to move vehicle |7.4.B.1| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rearmost bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill |nr leaf spring front mount| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |nr leaf spring rear mount| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded [shock absorber @ chassis member] |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded [shock absorber @ chassis member] |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded [leaf spring @ inner/ outer body sill] |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded [leaf spring @ chassis member] |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded door shut |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount area at outrigger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis |in engine bay| |2.4.A.3| | 1 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
| Front Fuel tank insecure fuel tank supporting strap corroded |6.1.3 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury wing holed and sharp edged |6.2.1 |a| |i|| | 1 |
| Offside Body has a sharp edge caused by corrosion Step to pick/up body |6.1.C.1| | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened holed and weakened |5.3.3 |b| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing panel extensively corroded from front to under drivers floor . (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Body panel corroded and likely to cause injury wing panel has a ragged hole. (6.2.1 (a) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear corner of step panel holed and weakened. (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel holed and corroded. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel holed and corroded. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panels above chassis rail and within area of suspension holed and corroded. (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel below step holed and corroded. (6.1.1 (c) (i)) | 1 |
| Central Prop shaft flexible coupling excessively deteriorated split and excessively deteriorated. (6.1.7 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded [back] of outer sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/out rigger |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Front Lower engine mounting deteriorated resulting in excessive movement stabiliser bar |6.1.D.1a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind road wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind road wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of road wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in front of road wheel |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember near wheel |6.1.B.2| | 1 |
| Nearside Front Track rod end loose locking nut on arm |2.2.B.1d| | 1 |
| Offside Rear Brake pipe inadequately supported hose above axle |3.6.B.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis behind front wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eye outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eye outrigger |2.4.A.3| | 1 |
| Offside Engine mounting fractured |6.1.8 |a| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember behind rear wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember behind rear wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember infront rear wheel |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step inner |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step outer |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind wheel |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind wheel around bump stop |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired inner wing not welded to bulkhead |2.4.A.3| | 1 |
| Headlamp not working on dipped beam n/s/f dip |1.7.5a| | 1 |
| Power steering component|s| leaking steering rack leaking badly |2.3.3b| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.47 |7.4.B.3b| | 1 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt n/s/f bottom ball joint cover split |2.4.G.2| | 1 |
| front brake binding both front binding |3.7.B.1| | 1 |
| front brakes release unevenly both front brakes sticking on after application /slow release |3.7.B.4| | 1 |
| Dropside cannot be secured in the closed position n/s/f cannot be locked due to bent area around lockpin |6.4.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal metal pipes into rack leaking |2.3.3b| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement o/s/r d rubber |2.4.G.2| | 1 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt n/s/f bottom b/j cover split |2.4.G.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint rack - metal power steering pipes leaking |2.3.3b| | 1 |
| Power steering fluid level below minimum very low |2.3.1| | 1 |
| Track rod end ball joint has excessive play n/s/f |2.2.B.1f| | 1 |
| Stop lamp not working n/s/r |1.2.1b| | 1 |
| Offside Rear Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis rail holed. |3.1.9| | 1 |
| Centre Rear passenger door cannot be opened from outside the vehicle rear doors also side door . |6.2.B.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner rear of arch /chassis small hole |2.4.A.3| | 1 |
| Nearside Rear Upper Vehicle structure excessively corroded within 30cm of towbar mounting chassis/crossmember |6.6.6| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded BOTH ABOVE AXLE |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside leaf spring mount areas. |5.3.6 |a| |i|| | 1 |
| Steering system excessively tight lock to lock |2.2.D.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top of chassis and inner wing |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage likely to fail |5.3.3 |b| |ii|| | 1 |
| Offside Rear Anti-roll bar linkage likely to fail |5.3.3 |b| |ii|| | 1 |
| Offside Rear Headlamp aim not tested |4.1.2 |b|| | 1 |
| Windscreen wiper not operating over a large enough area to give an adequate view front blades too short |8.2.1c| | 1 |
| Exhaust system not adequately supported tail pipe rubber split |7.1.1| | 1 |
| Front Brake performance not tested |1.2.1 |g|| | 1 |
| Rear Brake performance not tested |1.2.1 |g|| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion load area |6.1.C.1| | 1 |
| Fuel tank insecure FRONT STRAP LEAKING (6.1.3 (a) (i)) | 1 |
| Front Prop shaft securing bolt loose 4 bolts loose (6.1.7 (a) (i)) | 1 |
| Obligatory mirror seriously damaged, affecting the rear view BOTH N-S AND O-S (3.3 (b) (ii)) | 1 |
| Offside Front drive shaft coupling flexible rubber or fabric coupling softened by oil contamination |2.5.C.1e| | 1 |
| Central All position lamps excessively damaged so they are not visible from a reasonable distance O/S |1.1.A.3d| | 1 |
| Central All position lamps not working N/S |1.1.A.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount/cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount/cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Windscreen in such a condition that visibility through swept area is seriously affected cracked top to bottom in swept area (3.2 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas of corrosion |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength multiple areas of corrosion (5.3.6 (a) (i)) | 1 |
| Body has a sharp edge caused by damage Nearside mirror casing damaged. |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded At inner valance.|viewed from road wheel side|. |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded At inner sill area. |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor area and door step as viewed from underside of vehicle.|at seat mountings|. |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded At inner and outer sill area. |5.2.6| | 1 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt Outer belt. |5.2.2a| | 1 |
| Nearside Rear Body has a projection caused by damage On flatbed rubber strip along side dislodged. |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded At inner arch |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by spring mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt leaking |2.4.G.2| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill [ ANCHOR MOUNT ] |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded OUTRIGGER [ ANCHOR MOUNT ] |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL [ ANCHOR MOUNT ] |2.4.A.3| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring marked in yellow |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed marked in yellow |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by front spring eye marked in yellow |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter cill by step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis marked in yellow |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheel arch marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded several places |2.4.A.3| | 1 |
| Offside Rear Brake pipe leaking axle |3.6.A.1| | 1 |
| Oil leaking excessively from transmission axle |8.4.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired Nearside and offside rear chassis |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outter sill |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor / inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor / inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Nearside Front Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and floorpan |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and floorpan holed and section missing |2.4.A.3| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded chassis/bulkhead |3.6.C.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis/x member |6.6.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front hanger/outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear hanger/outrigger |2.4.A.3| | 1 |
| Nearside Rear Statutory seat belt missing locking catch missing |5.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by swinging shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor by top shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill by rear swinging shackle |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement bottom arm rear busk |2.4.G.2| | 1 |
| Nearside Front Service brake excessively binding after use (1.2.1 (f)) | 1 |
| Nearside Front Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Brake pipe likely to become detached or damaged front to rears (1.1.11 (d) (ii)) | 1 |
| Offside Front Lower Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded REAR CROSS MEMBER |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S/R CHASSIS RAIL |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S R OUTER SILL |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint At rack |2.3.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Cab floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Cab floor and step |5.2.6| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp wih sidelamp |1.4.A.2h| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |subframe| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking pipe at rack |2.3.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/and/wheel/arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/and/wheel/arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded affecting rear spring hanger |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded affecting front spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear shackle area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Centre sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Centre inner sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Centre sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Centre inner sill |2.4.A.3| | 1 |
| Fuel tank insecure front strap broken |6.1.3 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut turrett |2.4.A.3| | 1 |
| Nearside Outer Rear Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Offside Outer Rear Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill x4 |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre out rigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under sill/out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg behind road wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under valance |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill
ALSO further down on inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail behind shock absorber |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/step |7.1.1 |a| |i|| | 1 |
| Emissions not tested excessive soot |7.4.B.1| | 1 |
| Centre Front Bootlid cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Lower Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above bump stop mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above bump stop mount (6.1.1 (c) (i)) | 1 |
| Nearside Inner Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill, to the rear of passengers door |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near the front mounting |2.4.A.3| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member inside wheel arch as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member by rear mud flap |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member by rear mud flap as marked |6.1.B.2| | 1 |
| Nearside Front Fuel pipe leaking to tank |7.2.3| | 1 |
| Offside Brake pedal actuating cable wires broken and cable significantly weakened |3.3.A.1f| | 1 |
| Offside Front Front position lamp|s| not working top |1.1.A.3b| | 1 |
| Front Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt track rod end boot split. (2.1.3 (g) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength cab corroded by subframe mounting. (5.3.6 (a) (i)) | 1 |
| Central Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor under passenger seat |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wish-bone bush |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear X 2 |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings X 6 |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mountings and chassis outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mountings and chassis outriggers |2.4.A.3| | 1 |
| Centre Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door shut sill |5.2.6| | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear qaurter |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner qaurter |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and step |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area x3 anchor end (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle end (5.3.6 (a) (i)) | 1 |
| Brake prescribed area is excessively corroded load vavle (1.1.21 (e) (i)) | 1 |
| Driver`s airbag obviously defective warning light on |5.4.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing/wheel arch |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger AND front hanger - chassis sections/floor pans and inner arch panels |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger AND front hanger - chassis box sections/floor and inner arch panels |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded box section/inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock top mounting - chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting - chassis box section |2.4.A.3| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal at outrigger mounting point |6.2.2 |d| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal |6.2.2 |d| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill back (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring hanger |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outriggers |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 1 |
| Offside Front position lamp|s| incorrect colour blue |1.1.A.3e| | 1 |
| Offside Rear Seat belt insecurely fixed to the vehicles structure catch mount not of a suitable size |5.2.1a| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill pannel |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill pannel |6.1.B.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Near side step corroded sill front |5.2.6| | 1 |
| Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Rear Fuel system component leaking |7.2.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner chassis |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside drivers door step corroded |6.1.B.2| | 1 |
| Nearside Front Upper Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Oil leaking excessively from engine side of engine (8.4.1 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner wheel arches |2.4.A.3| | 1 |
| Offside Lower Brake cable has restricted free movement |3.5.1k| | 1 |
| Central Drive shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 1 |
| Brake cable has wires broken and is significantly weakened FRONT HAND BRAKE CABLE |3.5.1b| | 1 |
| Nearside Front Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Central Rear Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
| Rear Towbar retaining device missing 1 nearside 1 offside |6.6.3a| | 1 |
| Suspension component mounting prescribed area is excessively corroded NEARSIDE OUTTER SILL |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded OFFSIDE OUTTER SILL |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded OFFSIDE INNER SILL |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sills/step sills |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sills/step sills |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded arch area |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn inner d-bush (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn inner d-bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn inner d-bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn inner d-bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger/inner valance |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded w/arch/floor |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded w/arch,floor |2.4.A.3| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle handle broken off |6.2.B.1c| | 1 |
| Fuel system component leaking injectors leaking |7.2.3| | 1 |
| Nearside Front Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings arch |chalked| |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step area |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step area |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner out rigger area |6.1.B.2| | 1 |
| Nearside Integral body structure is fractured and structural rigidity is significantly reduced inner outer sills and inner step (6.1.1 (a) (i)) | 1 |
| Offside Integral body structure is fractured and structural rigidity is significantly reduced inner outer sills and inner step (6.1.1 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced arch (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced arch (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced arch (6.1.1 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced arch (6.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced quarter (6.1.1 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced quarter (6.1.1 (a) (i)) | 1 |
| Front Exhaust system not adequately supported bracket broken |7.1.1| | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release broken ancorage |5.2.5a| | 1 |
| Nearside Rear Brake load sensing valve defective and function impaired lever broken |3.6.E.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired lever broken |3.6.E.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis cross section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired closure panel |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside All outline marker lamps not working |4.2.1 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis brake pipe mounting area inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing above chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill under side loading door / body support (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill / body support (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Chassis above rear axle repair not seam welded (6.1.1 (d) (i)) | 1 |
| Offside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Chassis above rear axle repair not seam welded (6.1.1 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount inner and outer chassis leg |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis leg top and bottom |3.6.C.3| | 1 |
| Fuel tank insecure tank strap rusty |7.2.1| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Body chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Body mounting fixings missing |6.2.2 |c| |i|| | 1 |
| Offside Front Lower Body mounting fixings missing |6.2.2 |c| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing |1.1.21 |e| |i|| | 1 |
| Offside Front Brake hydraulic reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side step to chassis (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side sill (6.2.2 (d) (i)) | 1 |
| Central Rear Integral body structure has a fractured which is likely to adversely affect braking or steering cross member (6.1.1 (a) (ii)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering chassis rail near bump stops (6.1.1 (c) (ii)) | 1 |
| Rear Exhaust system insecure exhaust hanger broken (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill/front spring mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch/inner sill,rear spring mount area |5.3.6 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings full inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded By front of leaf spring |2.4.A.3| | 1 |
| Rear Indicator tell tale inoperative both |1.4.A.2a| | 1 |
| Nearside Body has a projection caused by corrosion sell |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion w/ arche |6.1.C.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near spring mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch has corrosion to the degree that has split from structure (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached seal (6.1.6 (i) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired center seal (6.2.2 (d) (ii)) | 1 |
| Front Lower Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor, behind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner rear quarter panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner rear quarter panel |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded doorstep inside door |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill, below sliding door |2.4.A.3| | 1 |
| Centre Front Parking brake mechanism/associated mounting prescribed area is inadequately repaired UNDERBODY |3.1.9| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired INNER WHEEL ARCH/FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired INNER WHEEL ARCH/FLOOR |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded UNDERBODY DOOR STEP |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded UNDERBODY DOOR STEP |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step -AS PER MARKED |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Step -AS PER MARKED |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner Sill-AS PER MARKED, consideration must be given to structural integrity of outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor Pan, As per marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch- As per marked |2.4.A.3| | 1 |
| Exhaust system not adequately supported Backbox rubber mount deteriorated |7.1.1| | 1 |
| Offside Power steering component leaking rack |2.1.5 |a|| | 1 |
| Nearside Front Macpherson strut has excessive play in the sliding bush or gland |2.5.B.1b| | 1 |
| Offside Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 13 holes of corrosion around the 12 body mountings |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower of (A) POST (6.1.1 (c) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch/wing |3.6.C.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside of step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underside of step area |5.2.6| | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure loose fitting lower at roll bar |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure nut missing |2.4.G.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill & step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in arch chassis |2.4.A.3| | 1 |
| Offside Rear Brake pedal does not operate a brake fitted to each wheel brake pipe not connected at master cylinder |3.3.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired top of chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired top of chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired on top of chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired on top of chassis |2.4.A.3| | 1 |
| Offside Hazard warning lamps inoperative all offside not working (4.4.1 (e)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded and has multiple inadequate repairs (6.1.1 (c) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 6.29 |7.4.B.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring, rear hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chalked (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chalked (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and Offside inner wheel arch (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and Offside near door step (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and Offside inner sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and Offside rear quarter (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner wheel arch to floor at spring swinger arm mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner wheel arch to floor at spring swinger arm mounting |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill at spring anchorage area |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch / floor at shock absorber top mounting area |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner wing / floor at shock absorber mounting area |2.4.A.3| | 1 |
| Front Lower Ball joint has excessive play both |2.2.B.1f| | 1 |
| Front Lower Seat belt anchorage prescribed area is excessively corroded both lower door sills |5.2.6| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat base |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat base |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded coil spring top mount |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab panel. |6.1.B.2| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills corroded (steps ) (6.1.1 (c) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner arches corroded (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both d |2.4.G.2| | 1 |
| Rear Prop shaft securing bolt loose rear centre bearing flange bolt loose (6.1.7 (a) (i)) | 1 |
| Nearside Front Upper Position lamp not working top marker (4.2.1 (a) (ii)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at wishbone rear mount. Chalked in yellow (5.3.6 (a) (i)) | 1 |
| Inner Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Outline marker lamp missing |4.2.1 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under servo |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Rear fog lamp not working Offside rear (4.5.1 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both inner sills (5.3.6 (a) (i)) | 1 |
| Body component corroded and likely to cause injury Both rear outer sills (6.2.1 (a) (i)) | 1 |
| Offside Inner Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded shocker area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near leaf spring |2.4.A.3| | 1 |
| Nearside Front Headlamp aim not tested |1.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (marked) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area (marked) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount outrigger |2.4.A.3| | 1 |
| Offside Rear Lower Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Centre Front Upper Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Offside Front Upper Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp sidelight with left indicator |4.2.3 |c|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch holed in a number of places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis leg holed both sides |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back spring mounting |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 holes within 30cm of top shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting corroded and holed in a number of places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back spring mounting corroded and holed in a number of places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top of inner arch strut housing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill/step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around back mount of leaf spring |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer body sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer body sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner body sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner body sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired o/s inner body sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer body sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer body sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mountings front and back heavily corroded and holed in a number of places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mountings front and back heavily corroded and holed in a number of places (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Anti-roll bar linkage attachment bracket/mounting fractured adrift |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Other passenger door catch missing (6.2.3 (c) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill/inner sill and step |5.2.6| | 1 |
| Offside Rear Tie bar/rod worn and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing by engine mount and under headlight |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step corroded |7.1.1 |a| |i|| | 1 |
| Front Suspension arm pin or bush excessively worn Both sides rear bushes |5.3.4 |a| |i|| | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Both sides |5.3.4 |b| |ii|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step& sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step & sills |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s&o/s shock mounts & o/s/r spring hanger |5.3.6 |a| |i|| | 1 |
| Track rod end ball joint has excessive play o/s rack end |2.1.3 |b| |i|| | 1 |
| Offside Outer Front Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Electrical wiring insecure tow bar |1.9.2a| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 5.92ml |7.4.B.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Electrical wiring insecure rear tow bar wiring |1.9.2a| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill to outrigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner step sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear inner outrigger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner wheel arches to floor |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded outersil |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded out rigger been cut away |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired plate not seam welded |2.4.A.3| | 1 |
| Nearside Front Front suspension has excessive movement at a suspension ball joint bottom ball joint |2.5.A.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded BOX SECTION |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Sill |5.3.6 |a| |ii|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded and outer sill areas corroded |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded and outer sill areas corroded |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step area corroded |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded mid outrigger corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/wheel arch areas corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/wheel arch areas corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill area corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger corroded |2.4.A.3| | 1 |
| Offside Outer Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail engine bay (6.1.1 (c) (i)) | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel |steering rack fitted| inner joint |2.3 |a| |i|| | 1 |
| Nearside Upper Front position lamp|s| not working marker |1.1.A.3b| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt ns & osf (2.1.3 (g) (ii)) | 1 |
| Offside Front Obligatory mirror missing door |8.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to flore |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to flore |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded foot step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded foot step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer riger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch / |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis on spring hanger ---- load conpensator |6.1.B.2| | 1 |
| Central Front Fuel tank insecure strap broken |7.2.1| | 1 |
| Nearside Inner Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing and leg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting front |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting rear |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill and door step |5.2.6| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel cross member |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded as marked |5.2.6| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced Both step areas corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt insecurely fixed to the seat |5.1.B.2a| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush bush in rear of arm |2.4.G.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering offside rear chassis member (6.1.1 (c) (ii)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering nearside rear chassis member (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Sub-frame has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Sub-frame has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Central Inner Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Rear Inner Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Offside Front Outer Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Windscreen wiper blade missing |6.1.2| | 1 |
| Nearside Front Horn sounds harsh or grating |1.6.2e| | 1 |
| Oil leaking excessively from engine Timing cover area (8.4.1 (a) (i)) | 1 |
| Offside Front Steering linkage ball joint has excessive play Track rod end (2.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch around strut (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn lower arm ball joint (5.3.4 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis rust (6.2.2 (d) (ii)) | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis has been welded and repaired but not properly (6.2.2 (d) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassic outrigger |2.4.A.3| | 1 |
| Fluid leak harmful to the environment or a risk to other road users oil cap missing (8.4.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and floor (5.3.6 (a) (i)) | 1 |
| Central Front Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Offside Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle mount |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both outer sills |5.2.6| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front and rear of rear leaf spring |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front and rear of rear leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis, behind wheel |2.4.A.3| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded n/s and o/s under sills |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at load sensing valve |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded n/s and o/s inner wings |2.4.A.3| | 1 |
| Offside Front Front suspension has excessive movement at a suspension ball joint loose in hub/hub worn |2.5.A.1c| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor step lip to outer sill broken away. |6.1.B.2| | 1 |
| Centre Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member by rear flexi hoses mountings. |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by seat mounting area. |6.1.B.2| | 1 |
| Rear Fuel tank insecure tank strap broken . |7.2.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill areas (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i)) | 1 |
| Driver`s seat insecure worn |6.2.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seat belt area |5.3.6 |a| |i|| | 1 |
| Nearside Front Sub-frame ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Shock absorbers has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength Inner wall of wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill section marked (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill small hole section marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis section marked above the leaf spring (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis marked above leaf spring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis marked at the very end (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis marked at the very end (6.2.2 (d) (i)) | 1 |
| Nearside Lower Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Offside Rear outline marker lamp|s| not working |1.1.B.1c| | 1 |
| Upper Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Parking brake lever insecure |3.1.3b| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means Won`t open to check seal |7.2.4b| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Lower arm ball joint |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Chassis behind wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Chassis behind wheel |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Under step |5.2.6| | 1 |
| Offside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Rear Stop lamp|s| not working both stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Hazard warning lamps inoperative when ignition is off (4.4.1 (e)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nsf passenger step, both rear sills,osr chassis next to shocker mounting (6.2.2 (d) (i)) | 1 |
| Fuel tank insecure tank strap rusted (6.1.3 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill front and rear |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill front and rear |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front and rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Front Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Brake valve leaking Load sensing valve leaking (1.1.7 (d) (i)) | 1 |
| Track rod end ball joint has excessive play Both sides (2.1.3 (b) (i)) | 1 |
| Headlamp light source and lamp not compatible Both front (4.1.4 (c)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s step |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill corroded |6.1.B.2| | 1 |
| Rear Upper passenger door catch insecure |6.2.B.2| | 1 |
| Brake pipe inadequately clipped under vehicle centre |3.6.B.1| | 1 |
| Brake pipe inadequately clipped engine bay |3.6.B.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded lower inner wing |2.4.A.3| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis at load valve |3.1.9| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure loose |2.4.G.1| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired under arch/chassis cut requires seam welding |2.4.A.3| | 1 |
| Rear Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Front Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Nearside Side repeater has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger x2 |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded middle outer sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded middle outer sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded middle inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail |inner wing| |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassiss |3.3.A.2| | 1 |
| Windscreen damaged and affecting the driver`s view of the road cracked zone A |3.2 |a| |ii|| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind seats (7.1.1 (a) (i)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured leaf spring front eye (5.3.1 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under sill panel |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced arch (6.1.1 (a) (i)) | 1 |
| Offside Front Lower Front suspension locking device ineffective |2.5.A.4| | 1 |
| Front Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp stop light on with side light (4.3.3 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner cill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded next to fuel tank |2.4.A.3| | 1 |
| Front Brake pipe inadequately clipped under bonnet |3.6.B.1| | 1 |
| Front Brake pipe inadequately supported under bonnet |3.6.B.1| | 1 |
| Nearside Outer Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Nearside Rear Brake valve retaining device insecure valve mounting area corroded |3.6.A.2d| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill door step |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded gearbox mounting |2.4.A.3| | 1 |
| Rear Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Fuel tank insecure fuel tank strap corroded away resting on front subframe |7.2.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear inner wheel arches |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Next to load sensing valve |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis/flitch under bonnet |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring shackle mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring shackle mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |spring anchor area| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |spring anchor area| |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg area |2.4.A.3| | 1 |
| Offside Front Lower Sub-frame severely distorted |2.4.G.1| | 1 |
| Offside Front Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Offside Rear Leaf spring anchor bracket loose rear u bolt |2.4.B.6a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chalked |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced b-post |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch / floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member |5.3.6 |a| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre crossmember |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage panel wheel arch |6.1.C.1| | 1 |
| Prop shaft flexible coupling excessively deteriorated BOTH (6.1.7 (d) (i)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively brake wheel cyl |8.4.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis beam next to fuel tank |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength chassis beam |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear floor rusted |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded And offside rear Spring hangers rusted |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing rusted
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded And offside outer sills rusted |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Rear under sill rusted |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded And offside rear front out riggers rusted |2.4.A.3| | 1 |
| rear brake recording little or no effort Offside |3.7.B.5a| | 1 |
| Exhaust has a major leak of exhaust gases CENTRE |7.1.2| | 1 |
| Rear Brake actuating linkage mounting prescribed area is fractured COMPENSATOR MOUNT |3.3.A.2| | 1 |
| Nearside Rear Upper Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing to chassis |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded RIGER & CROSS MEMBER IN 3 DIFFERENT PLACES. |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded RIGER AND CROSS MEMBER IN 3 DIFFERENT PLACES. |2.4.A.3| | 1 |
| Nearside Body component damaged and likely to cause injury mirror cover |6.2.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis around engine mounting under bonnet |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis around engine mounting behind front wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis and crossmember around rear spring shackle |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area around seat mounting |7.1.1 |a| |i|| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is fractured inner wing |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured floor behind cab and step and cill and arch and behind seat |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured cill and step and arch and behind seat and behind cab |5.2.6| | 1 |
| Front Body has a projection caused by corrosion both front arches |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured inner wing and out rigger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured inner wing and out rigger |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is fractured both top mounts |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is fractured back of cab both sides |5.2.6| | 1 |
| Nearside Front Wheel nut|s| missing and nsr |4.2.A.1e| | 1 |
| Nearside Front position lamp|s| not working cab marker |1.1.A.3b| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top section of chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded around front and rear leaf spring mounting points (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front of spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front top shock absorber |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock absorber |5.3.6 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded in engine bay (1.1.21 (e) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near fuel tank (6.1.1 (c) (i)) | 1 |
| Rear Direction indicators adversely affected by the operation of another lamp Both |1.4.A.2h| | 1 |
| Nearside Front Upper Outline marker lamp not working & offside. |4.2.1 |a|| | 1 |
| Nearside Rear Upper Outline marker lamp not working & offside. |4.2.1 |a|| | 1 |
| Brake pedal actuating lever has abnormal movement indicating maladjustment or excessive wear |3.3.A.1h| | 1 |
| Nearside Front Body has a sharp edge caused by damage headlamp lens broken |6.1.C.1| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp by indicator |1.1.A.3f| | 1 |
| Offside Obligatory mirror missing mirror glass missing |8.1.1| | 1 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view mirror glass broken |8.1.2a| | 1 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded front & rear |2.4.A.3| | 1 |
| Seat belt insecurely fixed to the vehicles structure 2nd row seats |5.2.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Front |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front |2.4.A.3| | 1 |
| Rear Outline marker lamp missing ns/os |4.2.1 |a|| | 1 |
| Offside Upper Position lamp not working cab top light (4.2.1 (a) (ii)) | 1 |
| Prop shaft flexible coupling excessively deteriorated 1st joint (6.1.7 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill section corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill box sections holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear shackle mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp light intensity significantly reduced covered by cherry picker (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Stop lamp(s) light intensity significantly reduced covered by cherry picker (4.3.3 (a) (ii)) | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced covered by cherry picker (4.4.3 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded at the chassis leg |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded at the chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at the top mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis box section /inner wing various holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near anchor |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under step near B post |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill/inner sill /under step near B post |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing turret |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced CAB STEP (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced CAB STEP (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, by rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to exhaust leak (8.2.2.2 (e)) | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device ineffective temp cap |6.1.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front of |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch rear off |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill plus outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger and rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill and outrigger |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front rear and central (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure is deformed and structural rigidity is significantly reduced front rear and central (6.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount. |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / step area |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Rear Braking system leaking Union block leaking. |3.6.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring hanger mount. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger mount. |6.1.B.2| | 1 |
| Rear rear brake recording little or no effort Both |3.7.B.5a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under cab step/sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nsr and osr spring mounts rotten |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nsr and osr outrigger rotten |2.4.A.3| | 1 |
| Fuel system component leaking injector ? |7.2.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rotten |6.1.B.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill rotten |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member rotten |6.1.B.2| | 1 |
| Rear Seat belt installation does not use the standard seat belt mounting bolts and washers both seats |5.3.1c| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember /chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember /chassis |2.4.A.3| | 1 |
| Parking brake inoperative on one side nearside and offside, cable broken (1.4.1 (a)) | 1 |
| Brake cable damaged park brake (1.1.15 (a)) | 1 |
| Offside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Front Body panel damaged and likely to cause injury nearside and offside, front wing (6.2.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill / both ends of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength at both end of spring (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength and nearside inner wheel arches (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength and nearside rear chassis rails both sides (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength at front and rear (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected nearside outer sill panel, both rear inner wheel arches, offside front inner sill panel, offside outer sill panel, nearside front step, offside rear floor, offside rear outrigger, nearside rear chassis. (5.3.6 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside inner sill panel holed (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of wheel arch inner and outer body |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front front brake binding hose |3.7.B.1| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step |6.2.2 |d| |i|| | 1 |
| Nearside Front Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal At steering rack |2.3.3b| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Tipper body |6.2.1 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury Tipper body |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer step |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Position lamp showing white light to the rear Roof light broken |4.2.3 |a| |ii|| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded chassis |2.2.C.1h| | 1 |
| Nearside Stop lamp|s| light intensity significantly reduced when operated with indicator |4.3.3 |a| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded |6.1.1 |c| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded OSF sill + Step |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded NSR out rigger / NSR + OSR inner wheel arhcs floor + chassis rails / OSR sill |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering OS sill |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and n/s rear at rear of springs |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and n/s front inner wheel arches |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangers (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangers (5.3.6 (a) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect head light defective (4.1.2 (c)) | 1 |
| Body mounting fixings insecure inter cooler (6.2.2 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab |7.1.1 |a| |i|| | 1 |
| Exhaust system not adequately supported end pipe mount is broken |7.1.1| | 1 |
| Rear Floor excessively deteriorated open pick up load area floor made of wooden ply boards |6.2.4 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced behind cab |7.1.1 |a| |i|| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember |1.1.21 |e| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cab step |6.2.2 |d| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle bracket |2.4.A.3| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf anchor bracket |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf anchor bracket |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded seat base |5.2.6| | 1 |
| Nearside Front Dropside component corroded and likely to cause injury STEP CORRODED SHARP EDGE (6.2.1 (a) (i)) | 1 |
| Offside Rear Dropside cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Nearside Front Body component damaged and likely to cause injury Mirror damaged (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rails |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rails |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases front-mid joint loose |7.1.2| | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated marked as yellow (6.1.7 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush marked yellow (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn back bush marked as yellow (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt ball joint (5.3.4 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Cab floor |5.2.6| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced under the bonnet (6.1.1 (a) (i)) | 1 |
| Nearside Rear Axle insecure u clamp loose bolts (5.1.1 (b) (i)) | 1 |
| Nearside Front Brake pipe lock to lock check twists a brake pipe |2.2.D.1b| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Direction indicator not in good working order |not working| |1.5.1b| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/crossmember |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced drvers step |6.1.1 |c| |i|| | 1 |
| Offside Stop lamp(s) not working bulb fitted worngly (4.3.1 (a) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sub fram |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sub fream |6.1.B.2| | 1 |
| Nearside engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Nearside Front Anti-roll bar locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded strut tunnel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger both ends (5.3.6 (a) (i)) | 1 |
| Hazard warning switch faulty lights not working |1.4.B.1d| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp fault with side light and brake light |1.3.2f| | 1 |
| Power steering component|s| leaking steering rack/pipes |2.3.3b| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 1 |
| Offside Rear Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Outer Upper Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Body has a sharp edge caused by corrosion step, inner |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member near rear mount of rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member near rear mount of rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by rear shocker top mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength *4 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength *4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting of cab |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door sill (5.3.6 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings longitudinal member by engine mounting either side |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member heavily corroded in centre and osr |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member holed by suspension leaf spring mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan heavily corroded and weak |6.1.B.2| | 1 |
| Offside Rear Rear wheel bearing has excessive play and noisey |2.6.2| | 1 |
| brake disc in such a condition that it is seriously weakened scored |3.5.1i| | 1 |
| Front Lower Ball joint has excessive play both sides |2.2.B.1f| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |inside engine bay by engine mount| |6.1.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill and rea r box section |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front to rear inner sill and rear box section |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded floor to wheel arch |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Horn not working not working |1.6.2a| | 1 |
| Obligatory mirror missing drivers door |8.1.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os rear outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns door step |6.1.B.2| | 1 |
| Power steering component|s| leaking rack seal |2.3.3b| | 1 |
| Brake load sensing valve inoperative link rod missing |3.6.E.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper chassis box section |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper chassis box section |6.1.B.2| | 1 |
| Nearside Body insecure and dangerous to other road users cab trim |6.1.B.1b| | 1 |
| Offside Body insecure and dangerous to other road users bumper corner |6.1.B.1b| | 1 |
| Horn not loud enough to be heard by another road user weak |1.6.2b| | 1 |
| Nearside Rear position lamp|s| obviously incorrectly positioned bracket bent |1.1.A.3a| | 1 |
| Nearside Rear position lamp|s| incorrect colour showing white |1.1.A.3e| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear bush |2.4.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat and seat belt |5.2.6| | 1 |
| Nearside Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Spring mount (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill near wheel arch |6.1.B.2| | 1 |
| Exhaust system not adequately supported center exhaust outer cover |7.1.1| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i)) | 1 |
| Offside Front Brake hose damaged and likely to fail cords exposed |1.1.12 |a|| | 1 |
| Offside Front Brake hose porous (1.1.12 (e)) | 1 |
| Nearside Rear Leaf spring repaired by welding |2.4.B.1a| | 1 |
| Offside Rear Leaf spring repaired by welding |2.4.B.1a| | 1 |
| Nearside Electrical wiring insecure under side |1.9.2a| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded xmember |2.4.A.3| | 1 |
| Offside Front Upper Steering column retaining device missing |2.1.6| | 1 |
| Offside Body has a sharp edge caused by corrosion | BUCK CORRODED | |6.1.C.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail holed |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by front of rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by load valve |2.4.A.3| | 1 |
| Nearside Rear Brake valve retaining device insecure rusted off |3.6.A.2d| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring anchor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded LSV mounting point |1.1.21 |e| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn all rear (5.3.4 (a) (i)) | 1 |
| Nearside Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit Plate value 1.19 1/m |8.2.2.2 |a|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS LEG |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS LEG |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SPRING MOUNTING |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings SPRING MOUNTING |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL ARCH/SUSPENSION TURRET |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSSMEMBER |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSSMEMBER |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL/STEP |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL / STEP |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOOR PAN |6.1.B.2| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded Chassis leg under bonnet |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Sill step holed |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Sill step holed |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded Chassis leg holed |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded Wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at outrigger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch marked yellow |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill all marked yellow |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill marked yellow |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Fuel tank insecure strap corroded/broken |7.2.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside outer rear sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings behind the wheel |6.1.B.2| | 1 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings passenger door inner arch |6.1.B.2| | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings complete seal inner/outer |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings inner body arch/chasis seriously weakend |top of the exhaust| |6.1.B.2| | 1 |
| Nearside Inner Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp Flasher causes side lamp to flash |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear upper bolt mounting rusted away |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring upper mount outer chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring upper mount outer chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear panel |5.3.6 |a| |ii|| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction soft toy on dash |3.1 |a| |ii|| | 1 |
| Front Windscreen in an unacceptable condition 2 large cracks |3.2 |c| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured front bush mounting broken |5.3.1 |b| |ii|| | 1 |
| Offside Rear Leaf spring main leaf fractured front bush mounting broken |5.3.1 |b| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front mounting |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch to floor |5.3.6 |a| |ii|| | 1 |
| Emissions not tested no oil on dip stick |8.2.2.2 |e|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2) | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and floor step (6.1.B.2) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger. (6.1.B.2) | 1 |
| Offside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Side repeater not working (1.4.A.2c) | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f) | 1 |
| Offside Obligatory mirror missing main mirror missing (8.1.1) | 1 |
| Front passenger door cannot be opened from outside the vehicle (6.2.B.1b) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis inside wheel (2.4.A.3) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6) | 1 |
| Offside Front Body insecure and dangerous to other road users (6.1.B.1b) | 1 |
| Drivers airbag obviously defective (5.4.1) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| front brakes release unevenly (3.7.B.4) | 1 |
| Offside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Front Headlamp not working on dipped beam (1.7.5a) | 1 |
| Offside Front Headlamp not working on main beam (1.7.5a) | 1 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills/ foot step (5.2.6) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6) | 1 |
| Front Body insecure and dangerous to other road users front bumper (6.1.B.1b) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis rail (2.4.A.3) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in two places at rear spring hanger (2.4.A.3) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis around rear spring hangers front and rear (2.4.A.3) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inside front wheel arch (6.1.B.2) | 1 |
| Nearside Rear Leaf spring cracked (2.4.B.1a) | 1 |
| Offside Rear Leaf spring cracked (2.4.B.1a) | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecure (2.4.G.1) | 1 |
| Nearside Rear Rear wheel bearing has excessive play (2.6.2) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Above Suspension mount (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Above suspension mount (5.3.6 (a) (ii)) | 1 |
| Brake performance not tested Rear brake pipe burst (1.2.1 (g)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch / outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x/member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x/member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outigger (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded above sub frame mount |2.4.A.3| | 1 |
| Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement both rear bushes |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill as marked (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember as marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Steps (6.1.1 (c) (i)) | 1 |
| Nearside Front Windscreen wiper not working (3.4 (a)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp All lights inoperative when nearside indicator is switched on (4.4.3 (b)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp All lights inoperative when offside indicator is switched on (4.4.3 (b)) | 1 |
| Nearside rear brake recording little or no effort wet at back plate |3.7.B.5a| | 1 |
| Nearside Stop lamp not working light cluster bad earth |1.2.1b| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement main |2.4.G.2| | 1 |
| Offside Rear Exhaust system not adequately supported mounting |7.1.1| | 1 |
| Offside Front Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis legs |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outriggers |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front steps |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Rear fog lamp not working |1.3.2b| | 1 |
| Outer Rear passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside |6.1.B.2| | 1 |
| Nearside Inner Front Brake lining|s| insecure |3.5.1g| | 1 |
| Offside Body has a sharp edge caused by corrosion rear of cab lower |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top mounting turret |marked| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top mounting Inner wing extensive corosion |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded of rear cross member |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded chassis above rear spring |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded close to strut top mount |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion NS Outer sill corroded |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion OS outer sill corroded |6.1.C.1| | 1 |
| Nearside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings NSF inner sill /step corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings osf inner sill/step corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings nsf chassis leg top corroded |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings NSR inner wheel arch to floor corroded |6.1.B.2| | 1 |
| Central Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Rear crossmember corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings OSF inner wing close to suspension mounting corroded |6.1.B.2| | 1 |
| Offside Front Body insecure and dangerous to other road users OS mirror backing has sharp edges |6.1.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill area corroded and has had a previous unsatisfactory repair |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Adjacent to coil spring/strut mounting point |2.4.A.3| | 1 |
| Rear Brake pipe inadequately clipped Brake pipe running across the rear of the vehicle |3.6.B.1| | 1 |
| Front Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center outrigger |6.1.B.2| | 1 |
| Nearside Front Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Brake pipe excessively damaged both rear from comp to flexy (1.1.11 (c)) | 1 |
| Offside Outline marker lamp does not illuminate simultaneously with the position lamps x2 (4.2.2 (a)) | 1 |
| Nearside Rear Direction indicator incorrect colour white due to lens broke |1.4.A.2f| | 1 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance due to damaged valance |1.1.A.3d| | 1 |
| Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt unclipped (6.1.7 (g) (ii)) | 1 |
| Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively damaged significantly reducing structural strength marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion under seat, marked in yellow (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded, marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded, marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor strut corroded marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill
|6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Offside Body has a sharp edge caused by corrosion side sections |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion side sections |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion sill panel |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing near suspension strut mounting point |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing near suspension strut mounting point |2.4.A.3| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member behind rear axle |6.1.B.2| | 1 |
| Offside Rear Service brake application uneven across the axle late/lazy, has oil leaking from brake backplate area |3.7.D.2b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step and sorounding area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step and sorounding area |5.2.6| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember handbrake cable mounting point |3.1.9| | 1 |
| Suspension component mounting prescribed area is excessively corroded X2 rear crossmembers |2.4.A.3| | 1 |
| Centre Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Rusty and Holed |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Rusty and Holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Rusty and Holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch Rusty and Holed |5.3.6 |a| |i|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch marked yellow |6.1.B.2| | 1 |
| Prop shaft joint excessively worn centre u/j worn (6.1.7 (c) (i)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt gaiter split (2.1.3 (g) (ii)) | 1 |
| Power steering component leaking steering rack area (2.1.5 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shock absorber mount (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength nearside & offside rear spring anchor mounts areas (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength nearside & offside rear springs shackle mounts areas (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Rear engine mounting bracket damaged and likely to fail |6.1.D.1b| | 1 |
| Nearside Rear Road wheel fixing missing stud and nut missing |5.2.1 |a| |i|| | 1 |
| Offside Front Anti-roll bar fractured snapped (5.3.3 (b) (ii)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear cross member marked with yellow (5.3.6 (a) (i)) | 1 |
| Wheel bearing rough when rotated both rear (5.1.3 (b) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near handbrake cable mounts |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near spring hanger |6.1.B.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded under the bonnet on top off chassis |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush and off side |2.4.G.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x3 |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded arch inner |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded arch iner |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases box and tail pipe |7.1.2| | 1 |
| Centre Rear Lower Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded fixed shackle |2.4.A.3| | 1 |
| Front Fuel system component leaking injector area |7.2.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement at rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear outer sill marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at chassis leg behind road wheel marked yellow |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour to bright |1.1.A.3e| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Front Front position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting insecure lower securing nut loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached ball joint moves up and down in hub (5.3.4 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached ball joint moves up and down in hub (5.3.4 (a) (ii)) | 1 |
| Nearside Front Body insecure to the extent that stability is seriously impaired outer sill and door step |6.2.2 |a| |ii|| | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired outer sill and door step |6.2.2 |a| |ii|| | 1 |
| Prop shaft bearing excessively worn middle bearing |6.1.7 |b| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear d bushes worn |5.3.4 |a| |i|| | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn d bush worn |5.3.4 |a| |i|| | 1 |
| Offside Front Body has a sharp edge caused by damage lamp unit |6.1.C.1| | 1 |
| Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine plate limit=0.75 actual=4.38 |8.2.2.2 |b|| | 1 |
| Power steering pipe/hose leaking leaking where pipes meet rack |2.1.5 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward of rear axle in two places, one on inner sill, other wheel arch floor pan |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear axle inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension has inadequate clearance with the chassis rear shackle fouling body |2.4.A.1a| | 1 |
| Offside Rear Suspension has inadequate clearance with the chassis fouling body |2.4.A.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting| areas| |2.4.A.3| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp with side lights on |1.2.1f| | 1 |
| Emission control equipment obviously modified sensor in egr body |8.2.2.1 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of inner arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear of inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower inner sill area at rear leaf spring mount area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wing |2.4.A.3| | 1 |
| Front All direction indicators not working both sides |4.4.1 |a| |ii|| | 1 |
| Rear All direction indicators not working both sides |4.4.1 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch |5.3.6 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated foot step |6.2.4 |a| |i|| | 1 |
| Nearside Front Floor excessively deteriorated foot step |6.2.4 |a| |i|| | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sills corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting offside outer sills. (6.2.2 (d) (i)) | 1 |
| Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both nsf and osf wheel arches. (6.2.2 (d) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel archs |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg support |6.1.B.2| | 1 |
| Fuel system component leaking mechanical fuel pump |7.2.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner w/arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring anchor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring anchor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring shackle mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring shackle |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near subframe mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded compensator mount |3.3.A.2| | 1 |
| Nearside Front engine mounting bracket fractured and likely to fail inner wheel arch excessive corrosion |6.1.D.1b| | 1 |
| Offside Front engine mounting bracket fractured and likely to fail inner wheel arch excessive corrosion |6.1.D.1b| | 1 |
| Nearside Brake pipe inadequately supported front to rear brake pipes |3.6.B.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner lower door step (6.1.1 (c) (i)) | 1 |
| Offside Stop lamp has a product on the lens so it is not visible from a reasonable distance dim |1.2.1d| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength backing step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn bush |5.3.4 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill step area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill step area (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases tail pipe also insecure |7.1.2| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Brake pump retaining device insecure abs pump |3.6.A.2d| | 1 |
| Nearside Body has a sharp edge caused by corrosion tipper step |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under bonnet chassis |2.4.A.3| | 1 |
| Offside Front Body mounting fixings insecure drop side insecure |6.2.2 |c| |i|| | 1 |
| Offside Rear Position lamp lens seriously defective lamp has fault with other lamps |4.2.1 |b|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis member and inner step and out riger corroded |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering front and center chassis member corroded |6.1.1 |c| |ii|| | 1 |
| Rear Brake hose damaged and likely to fail brake hose insecure |1.1.12 |a|| | 1 |
| Nearside Body has a sharp edge caused by corrosion load step |6.1.C.1| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded door step/sill |5.2.6| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded mid chassis |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail by spring hanger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail wheel arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill / step area |6.1.B.2| | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step inner |2.4.A.3| | 1 |
| Sound deadening material insecure by turbo |8.1.1 |b| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill panels |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mount inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mount inner and outer sill (5.3.6 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired both inner and outer sills and body mounts heavily corroded (6.2.2 (d) (ii)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp Affected by indicators/hazards. (4.2.3 (c)) | 1 |
| Fuel tank insecure tank straps broken and corroded |7.2.1| | 1 |
| Nearside Seat belt insecurely fixed to the seat row 3 upper attachment |5.2.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded rear corner inner /outer sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded rear corner inner sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch to floor |5.2.6| | 1 |
| Front front parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Offside Front Anti-roll bar linkage inappropriately repaired |2.4.A.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded chassis leg |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear most spring mount,Chassis outrigger |2.4.A.3| | 1 |
| Offside Rear Towbar component insecure bolt missing |6.6.1| | 1 |
| Offside Hazard warning switch faulty not working |1.4.B.1d| | 1 |
| Offside Rear Shock absorber insecure Lower bolt loose. |2.7.2b| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded silll back |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded In various places as marked |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step floor inner |5.2.6| | 1 |
| Offside Rear Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top mountings |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring & shock mountings |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring & shock mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded side valance and outrigger |2.4.A.3| | 1 |
| Centre front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch rusted |2.4.A.3| | 1 |
| Offside Stop lamp(s) showing white light to the rear lens deteriorated (4.3.3 (a) (ii)) | 1 |
| Offside Rear Position lamp not working interfering with indicator |4.2.1 |a|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush unbonded |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength marked (5.3.6 (a) (i)) | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting marked (6.1.6 (i) (i)) | 1 |
| Offside Side repeater not working With hazard warning lamps |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working With hazard warning lamps |4.4.1 |a| |ii|| | 1 |
| Emissions not tested Excessive smoke at idle |8.2.2.2 |e|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill complete |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill complete |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill complete |5.3.6 |a| |i|| | 1 |
| Nearside Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Central Prop shaft joint so worn it is likely to fail securing bolt loose resulting in excessive movement (6.1.7 (c) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg visible from under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis seen through wheel arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Tie bar/rod which is adjustable, locking device insecure |2.4.G.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete seal |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside rear x 2 |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside rear main chassis inner and outer |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch x4 |6.1.A.1| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to rear inner and outer sills (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to rear inner and outer sills (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and nearside front under steps weakened (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and nearside front inner wheel arches (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and nearside rear behind wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Service brake excessively binding and offside front (1.2.1 (f)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis face |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis face |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis face |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering several places in arch |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Effect to shock absorber. (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Effect to shock absorber. (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering front side inner sill. (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering front side inner. (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Rear sill. (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear sill. (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Inner Vehicle structure modified such that it is likely to adversely affect braking or steering Unsafe welding. (6.1.1 (d) (ii)) | 1 |
| Offside Rear Vehicle structure modified such that it is likely to adversely affect braking or steering unsafe welding. (6.1.1 (d) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel Arche. (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch. (6.1.1 (c) (ii)) | 1 |
| Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Brake hose excessively stretched lock to lock |1.1.12 |b| |ii|| | 1 |
| Body component damaged and likely to cause injury o/s mirror housing (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inside wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock upper mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mounting in rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis top shock absorber fixing (5.3.6 (a) (i)) | 1 |
| Front Macpherson strut mounting corroded and seriously weakened BOTH Inner wings (5.3.3 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing engine mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By rear spring mounting (5.3.6 (a) (i)) | 1 |
| Rear All position lamps excessively deteriorated so that they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear spring, front mount area, both sides |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear springs, rear mount areas, both sides |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded step areas, both sides |5.2.6| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion and offside front arches |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at swinging shackel |2.4.A.3| | 1 |
| Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger next to rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear drop sill next to rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to upper shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop sill next to front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail next to shocker mount |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rearmost |2.4.G.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f chassis |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering X2 |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering DOOR STEP |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering SHOCK MOUNTS |6.1.A.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by spring mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by spring mounting |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded bump stop area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded bump stop area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger and step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab panel (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab panel (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength middle cross member (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired centre cross member |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength middle cross member (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 2 |5.3.6 |a| |i|| | 1 |
| Nearside Window in an unacceptable condition door window blacked with tape (3.2 (c) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step to sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount to rear cross member (5.3.6 (a) (i)) | 1 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn PROPSHAFT REAR BEARING WORN |2.4.G.4d| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill / step |6.1.B.2| | 1 |
| Fuel tank insecure front strap corrouded |7.2.1| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded Front spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted Inner wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is severely distorted Wheel arch |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All body mounting |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Chassis outrigger |6.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Chassis leg |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area |6.2.2 |d| |i|| | 1 |
| Offside Front Brake pipe inadequately clipped to hose |3.6.B.1| | 1 |
| Parking brake lever has no reserve travel reaches end of travel during test |3.1.6b| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o.s.r chassis |2.4.A.3| | 1 |
| Offside Front Body has a projection caused by corrosion rear of wing |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by damage headlamp |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and outer |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger cross member |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret area |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch, rear of front arch. |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner step area under vehicle |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step to sill (6.1.1 (c) (i)) | 1 |
| Steering column locking device insecure pinch bolt |2.1.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine compartment |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner |5.3.6 |a| |i|| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor under vehicle |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded under floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under floor |5.2.6| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to back |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to back |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front arches top of the springs |6.1.1 |c| |i|| | 1 |
| Service brake has no recorded effort at a wheel both rear wheels |1.2.1 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded doorstep under sill |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep on top |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill Front To Rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill Front To Rear |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill Front To Rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill Front To Rear |6.1.B.2| | 1 |
| Emissions not tested aborted due smoke |7.3.A.1| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement key missing |7.2.4b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill, "b" pillar (6.1.1 (c) (i)) | 1 |
| Emergency exit window cannot be opened from inside the vehicle rear doors |6.2.D.1a| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Corroded foot well |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is inadequately repaired wing |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front step |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside front step |5.2.6| | 1 |
| Leaf spring eye defective |anchor| offside spring eye broken at fixed shackle area |2.4.B.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear inner and outer sills - fixed shackle |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear inner and outer sills - fixed shackle |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside back panels - swing shackles |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside rear side panels - swing shackles |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis - swing shackle |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis - swing shackle |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting nearside back panel |6.6.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front inner arch - sub frame |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is severely distorted chassis outrigger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail around spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember/ outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis -shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel contaminated with oil -axle (1.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear outer spring mount bracket |2.4.A.3| | 1 |
| Rear Brake cable corroded and significantly weakened |3.5.1b| | 1 |
| Nearside Outer Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury above wheel |6.2.1 |a| |i|| | 1 |
| Body component corroded and likely to cause injury Nearside & rear of load bed (6.2.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Bulkhead (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bulkhead (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door Step and lower inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door Step and lower inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and box chassis (5.3.6 (a) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.80% |7.4.B.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember/chasis
|2.4.A.3| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Towbar component insecure |6.13.1| | 1 |
| Floor excessively deteriorated O-S-R inner sill |6.2.4 |a| |i|| | 1 |
| Floor excessively deteriorated O-S-R quarter |6.2.4 |a| |i|| | 1 |
| Floor excessively deteriorated N-S-R inner sill |6.2.4 |a| |i|| | 1 |
| Brake performance not tested Brake pipe leaking |1.2.1 |g|| | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel |steering rack fitted| inner rack end |2.3 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced roof line corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Steering locking device ineffective track rod end lock nut loose (2.1.3 (d)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Access panel cannot be secured in the closed position Bonnet could not be opened, under bonnet items not checked,. (6.2.1 (e)) | 1 |
| Access panel cannot be secured in the closed position bonnet (6.2.1 (e)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced underside |6.1.1 |c| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury underside |6.2.1 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded brake compensator valve |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced body mount |6.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded a rear spring hanger mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch and floor at spring hanger mounting |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis and inner wheel arch at front shocker mounting |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near strut top mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near strut top mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step in various areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step in various areas |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring & anchor points |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring & anchor points |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch in various areas |2.4.A.3| | 1 |
| Headlamp not working on main beam both
|1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x4 areas |5.3.6 |a| |i|| | 1 |
| Central Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Inner Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Offside Rear Lower Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Fuel system component leaking number 4 injector leaking |7.2.3| | 1 |
| Offside Rear Leaf spring fractured broken at spring anchor |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle out rigger |2.4.A.3| | 1 |
| Nearside Steering rack gaiter missing |2.2.D.2d| | 1 |
| Nearside Inner Track rod end loose |2.2.B.1d| | 1 |
| Offside Inner Track rod end loose |2.2.B.1d| | 1 |
| Nearside Wheel insecure |4.2.A.1c| | 1 |
| Offside Outer Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Fuel cap/sealing device ineffective fuel cap doesnt seal (6.1.3 (b) (i)) | 1 |
| Offside Front position lamp|s| not working on cab |1.1.A.3b| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and chassis (6.1.1 (c) (i)) | 1 |
| Rear fog lamp not working lamp damaged would show white light |4.5.1 |a| |ii|| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid o/s/r wheel cylinder |1.1.16 |b| |i|| | 1 |
| Exhaust has a major leak of exhaust gases egr pipe |6.1.2 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired incomplete, excess corrosion into rear valence. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger & lower valence. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength REAR MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength REAR MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SHOCK ABSORBER MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SHOCK ABSORBER MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength REAR (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength FRONT (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength REAR (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As marked |6.1.B.2| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced back off cab |7.1.1 |a| |i|| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected |1.1.21 |e| |ii|| | 1 |
| Offside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor where steering U J comes through |2.1.2 |e| |ii|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury out rigger |6.2.1 |a| |i|| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush All |2.4.G.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near spare wheel |6.1.B.2| | 1 |
| Offside Outline marker lamp not working Front and centre (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working Front centre and rear (4.2.1 (a) (ii)) | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement locked |7.2.4b| | 1 |
| Offside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement d rubber |2.4.G.2| | 1 |
| Central Prop shaft flexible coupling excessively deteriorated Both (6.1.7 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/door pillar |2.4.A.3| | 1 |
| Rear fog lamp does not emit a steady red light very pale |4.5.4 |a|| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced dull |4.2.3 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under bonnet bulkhead / chassis rusty |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength incomplete repair |5.3.6 |a| |i|| | 1 |
| Nearside Front Body has a sharp edge caused by damage mirror backing missing |6.1.C.1| | 1 |
| Fuel cap/sealing device ineffective not locking |6.1.3 |b| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member in the centre |6.1.1 |c| |i|| | 1 |
| Exhaust has a major leak of exhaust gases silencer seam |7.1.2| | 1 |
| Offside Front Brake pipe leaking Metal brake pipe burst during roller brake test. |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step under vehicle corroded x 2 |5.2.6| | 1 |
| Front Headlamp not working on dipped beam x 2 |1.7.5a| | 1 |
| Offside Front Seat belt insecurely fixed to the seat bolt missing |5.2.1a| | 1 |
| Suspension component mounting prescribed area is excessively corroded hand brake mount in 3 holes at cables |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind bumper marked |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step marked |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch marked |2.4.A.3| | 1 |
| Rear Other passenger door cannot be opened from outside the vehicle door |6.2.3 |a|| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer seal |6.2.2 |d| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner seal |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner seal |6.2.2 |d| |i|| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear to center sill hole and corroded |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear to center sill hole and corroded |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill hole and corroded |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor hole and corroded under passenger seat area |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg X2 |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch numerous patches |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch numerous patches |2.4.A.3| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front spring mount yellow chalked |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring mount yellow chalked |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring mount yellow chalked |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front spring mount yellow chalked |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch yellow chalked |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch to floor yellow chalked |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill yellow chalked |6.1.1 |c| |i|| | 1 |
| Front Braking system leaking to rear load valve |3.6.A.1| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill back |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion corner of cab |6.1.C.1| | 1 |
| Offside Macpherson strut worn and seriously weakened |2.4.G.2| | 1 |
| Offside Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 1 |
| Offside Front Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 1 |
| Nearside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front drop sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front drop sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear drop sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill near front spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger next to rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger next to rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill next to front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor bracket fractured front spring eye (5.3.1 (b) (i)) | 1 |
| Power steering component leaking power steering pipe (2.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/ inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail behind wheel/ next to shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength drop sill near rear spring front mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill next to front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill next to front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and floor (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis above front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear near rear spring rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail between spring mounts (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch/floor near shock absorber mounting . (5.3.6 (a) (i)) | 1 |
| Rear passenger door hinge insecure |6.2.B.2| | 1 |
| Rear passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to bulk head (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step to inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to bulk head (6.2.2 (d) (i)) | 1 |
| Nearside Rear Upper Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings rear of cab |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Steering arm has relative movement at its fixings tie rod |2.2.B.1h| | 1 |
| Road wheel distorted |4.2.A.1a| | 1 |
| Stop lamp not working two |1.2.1b| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal steering rack |2.3.3b| | 1 |
| Rear Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside rear rear spring hangers/outriggers |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside inner and outer close to braking and suspension mounting points |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring shackle |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre crossmember (5.3.6 (a) (i)) | 1 |
| Rear Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember (1.1.21 (e) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded load bearing crossmember |3.1.9| | 1 |
| Offside rear brake recording little or no effort service brake |3.7.B.5a| | 1 |
| Nearside Front Hydraulic brake cylinder locking device missing |3.6.A.2d| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front brake disc contaminated by grease |3.5.1h| | 1 |
| Offside Inner Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Rear Anti-roll bar linkage pin or bush likely to become detached bolts loose lower (5.3.4 (a) (ii)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour light damaged |1.4.A.2f| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill X2 |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill X2 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of sill |6.1.B.2| | 1 |
| Nearside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement back bush |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked seat bolts |6.1.B.2| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp has the wrong bulb in |1.2.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Strut |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Strut |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion Sill |6.1.C.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut mounting | inner wing| |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut mounting |inner wing| |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded in step area |5.2.6| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush Both D bushes worn |2.4.G.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded brake load sensing valve |3.3.A.2| | 1 |
| Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded weel arch |3.6.C.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded infront |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded behind |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded infront |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded behind |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill middle (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step cross member |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member at swinging shackle |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort Low effort, maybe because of load sensing valve. |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort same as above. |3.7.B.5a| | 1 |
| Nearside Rear Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre next to load valve |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Front Electrical wiring damaged, likely to cause a short |1.9.2b| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Body |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Body has a sharp edge caused by corrosion dropside |6.1.C.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg under wheel arch |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger | marked | |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch | marked | |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |marked| |2.4.A.3| | 1 |
| Steering rack insecure |2.1.3 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mountings both ends of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mountings both ends of spring |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail by front of and behind engine mount |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension arm ball joint likely to become detached not fully fitted |5.3.4 |a| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wheel arch chassis |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded around top of shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Front cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded side of outrigger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner/outer sill |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassie inner wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded both sides of the tow bar |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded next to leaf spring |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near rear of rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near rear shocker (5.3.6 (a) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting close to spring hanger (6.2.2 (d) (i)) | 1 |
| Inner Front Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Offside Outer Rear Rear reflector missing |1.5.1a| | 1 |
| Front Power steering pipe|s| or hose|s| leaking from a seal at rack |2.3.3b| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn PROPSHAFT INSECURE!!!! |2.4.G.4d| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure nut loose |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at spring front mounting area |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement `d` bush |2.4.G.2| | 1 |
| Nearside Inner Steering linkage ball joint has excessive play track rod |2.1.3 |b| |i|| | 1 |
| Offside Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch to chassis (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of cab corroded (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both D (5.3.4 (a) (i)) | 1 |
| Nearside Macpherson strut ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner sill .Welded repairs have to be continuous weld! |2.4.A.3| | 1 |
| Nearside Front Front wheel bearing rough when rotated Wheel binding to bad to spin wheel . |2.5.A.2| | 1 |
| Offside Front Front wheel bearing rough when rotated Unable to spin wheel to test. |2.5.A.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired Sill area |5.2.6| | 1 |
| Central Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Front Brake prescribed area is excessively corroded Flexy hose mount (1.1.21 (e) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded brake flexy hose mount (1.1.21 (e) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension strut mount (5.3.6 (a) (i)) | 1 |
| Offside Inner Body modification likely to adversely affect braking or steering 3 places |6.2.1 |d| |ii|| | 1 |
| Offside Outer Body modification likely to adversely affect braking or steering 3 pl |6.2.1 |d| |ii|| | 1 |
| Offside Front Body modification likely to adversely affect braking or steering inner wheel arch |6.2.1 |d| |ii|| | 1 |
| Body has an unsafe modification |6.2.1 |d| |i|| | 1 |
| Offside Rear Body modification likely to adversely affect braking or steering |6.2.1 |d| |ii|| | 1 |
| Nearside Front Body modification likely to adversely affect braking or steering wheel arch |6.2.1 |d| |ii|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings auter |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings iner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings auter sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innersill |6.1.B.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush Front bush |2.4.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor / sill back |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill back |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step sill |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded Outer sills, rear inner quarter panels and rear inner wheel arches |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hangers chalked areas |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill chalked area |5.2.6| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded chalked area inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at shocker mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch 12" of strut mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis @ spring front & rear mounts |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis @ rear spring mount |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis @ brake compensator/shocker mount. |2.4.A.3| | 1 |
| passenger door cannot be opened from outside the vehicle bonnet,not allowing inspection of testable components. |6.2.B.1c| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing near suspension |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by suspension mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panels |5.3.6 |a| |i|| | 1 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel inner and outer |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing by suspension (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing by suspension (5.3.6 (a) (i)) | 1 |
| Nearside Outer Rear Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Offside Outer Rear Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Nearside External window not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.11.6b| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength tipper mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength tipper mount (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure mount broken (6.1.3 (a) (i)) | 1 |
| Brake valve leaking such that brake functionality is affected load valve (1.1.7 (d) (ii)) | 1 |
| Power steering pipe/hose leaking pinion |2.1.5 |a|| | 1 |
| Nearside Front Engine mounting bracket fractured corroded around chassis where engine mount bolts to (6.1.8 (a) (ii)) | 1 |
| Nearside Statutory seat belt missing |5.1.A.1| | 1 |
| Prop shaft flexible coupling excessively deteriorated Prop Centre bearing |6.1.7 |d| |i|| | 1 |
| Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step and arch |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases flex |7.1.2| | 1 |
| Nearside Rear Statutory seat belt missing attachment fitting missing |5.1.1| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre to rear sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill area inner |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill area inner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member at spring hanger area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner foot well area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner foot well area |5.2.6| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill all |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill all |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis area both sides |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner suspension leg |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis wheel arch area |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill chalked |2.4.A.3| | 1 |
| Nearside Rear Radius arm attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill & inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill & inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing & floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing & floor |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section to rear chassis out rigger |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sill section inner and outer to chassis out rigger |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor to chassis rail |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floor to chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill section |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre body mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded centre body mount |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded engine bay |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch in 3 places |2.4.A.3| | 1 |
| Offside Rear position lamp|s| incorrect colour Showing white light |1.1.A.3e| | 1 |
| Offside Rear fog lamp emits a light other than red Showing white light |1.3.2e| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep underside of vehicle |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep underside of vehicle |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch back of wheel |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under arch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted next to shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted inner sill front of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted back of wheel |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail by fuel tank |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting crossmember |6.1.6 |i| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch to chassis rail |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch to rail |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to arch |6.1.B.2| | 1 |
| Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Power steering pump leaking (2.1.5 (a)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. inner and outer (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. inner and outer (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near front and rear spring hangers (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near front and rear springer hangers (6.2.2 (d) (i)) | 1 |
| Nearside Power steering malfunctioning judder on turn (2.1.5 (a)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced after spring hanger missing (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Body component insecure wheel arches not attached to chassis [silicon used] (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Body component insecure wheel arch not attached to chassis [silicon used] (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH (TURRET) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEAR REAR SPRING HANGAR (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEAR REAR SPRING HANGAR (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Offside Outer Front Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Offside Rear External window insecure and likely to fall out |6.11.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s rear outriggers and o/s/f chassis leg under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Brake hose inappropriately repaired insecure | bolt missing | |3.6.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded doorstep |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded doorstep |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis, outriggers , inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, outriggers , inner wheel arch |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both rear quarter inner panels and cross member |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at mud flap area (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear of |5.3.4 |a| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d-bush |5.3.4 |a| |i|| | 1 |
| Front passenger door catch insecure (6.2.3 (c) (ii)) | 1 |
| Exhaust emissions exceed manufacturers specified limit limit 0.75 (8.2.2.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases at last box (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter sill (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Nearside Front Front passenger door catch insecure (6.2.3 (c) (ii)) | 1 |
| Central Prop shaft securing bolt missing joining shaft (6.1.7 (a) (i)) | 1 |
| Nearside Rear Lower Engine mounting excessively loose gear box mount (6.1.8 (a) (ii)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Drag link end ball joint has excessive play tie rod (2.1.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail ,lower. |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail, lower |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s front inner wings/chassis rails, |6.1.A.1| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s front lower flitch/inner wing/door steps, |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s outer sills, |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s inner sills/door steps front |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s rear inner sills,inner wings/boot floor/rear inner wing chassis outriggers holed and weak. |6.1.A.1| | 1 |
| front brake binding n/s and o/s, |3.7.B.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush, |2.4.G.2| | 1 |
| Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step | corroded| |7.1.1 |a| |i|| | 1 |
| Obligatory mirror insecure both door mirrors (3.3 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in two places (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near gearbox mounting & behind washer bottle (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near brake compensator valve (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced floor area holed & badly corroded insecure (6.1.1 (b) (ii)) | 1 |
| Windscreen damaged and affecting the driver`s view of the road Crack in Zone A |3.2 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear spring mount area |TWO PLACES| |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear spring mount area |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill / front leaf spring mount area |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front of inner wheel arch / front leaf spring mount area |6.1.1 |c| |ii|| | 1 |
| Offside Front Brake pipe excessively damaged (1.1.11 (c)) | 1 |
| Offside Lower Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Outline marker lamp not working both front (4.2.1 (a) (ii)) | 1 |
| Nearside Upper Leaf spring fractured (5.3.1 (b) (i)) | 1 |
| Rear engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Nearside Front Front position lamp|s| not working top roof |1.1.A.3b| | 1 |
| Rear Exhaust system not adequately supported rubber broken |7.1.1| | 1 |
| Offside Rear Leaf spring fractured broken |2.4.B.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mount area x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis above rear spring |2.4.A.3| | 1 |
| Nearside Rear Leaf spring cracked front spring eye broken |2.4.B.1a| | 1 |
| Offside Rear Leaf spring cracked front spring eye broken |2.4.B.1a| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded leaf spring support member |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` centre lower |8.3.1e| | 1 |
| Offside Rear Leaf spring with an unsafe modification movement in leaf spring multi leafs |5.3.1 |d| |i|| | 1 |
| Offside Direction indicator missing |1.4.A.2b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering hole in chassis by load sensing valve |6.1.A.1| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step |6.2.2 |d| |i|| | 1 |
| Nearside All outline marker lamps not working |4.2.1 |a| |ii|| | 1 |
| Offside Rear Leaf spring main leaf fractured broken on the eye |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected crossmember corroded (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected crossmember corroded (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis corroded (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis corroded nr axle (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn wish bone bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer rigger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near rear spring hanger box section corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near rear spring hanger box section corroded |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outter sill inside door corroded |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind both front wheel inner arches corroded rear of wheels |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner lower quarter pannel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded near side rear chassi near compunsator |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner lower box section near rear spring hanger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner and outer sills corroderd |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front of rear leaf spring corroderd |2.4.A.3| | 1 |
| Central Prop shaft flexible coupling excessively deteriorated mounting (6.1.7 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced front under sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger and arch areas corroded and holed (shackle end of spring) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger and arch areas corroded and holed(shackle end of spring) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger area,inside wheel arch (shackle end of spring) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Undersill area corroded and holed (anchor end of spring) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outer sill area (anchor end of spring) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing to chassis areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis,shock absorber mount prescribed area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis,shock absorber mount prescribed area (5.3.6 (a) (i)) | 1 |
| Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Emissions not tested exhaust holed, so can not test at tailpipe |7.3.A.1| | 1 |
| Parking brake not fitted on at least two wheels cable snapped and on passenger seat |3.1.1| | 1 |
| Brake pedal anti-slip provision incomplete pedal rubber worn through to the metal |3.3.A.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing, near the front strut mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing, around the front strut mount |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near mud guard (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills and doorstep |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills and sliding door step |6.1.B.2| | 1 |
| Horn not working horn |1.6.2a| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor corroded / holed (front spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor corroded / holed (rear spring mounting (5.3.6 (a) (i)) | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated rearmost |6.1.7 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor holed (front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor holed (rear spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor holed (rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step holed |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting point holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting point holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected seal (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch next to suspension strut |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour lamp lens broken showing a white light |1.4.A.2f| | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen NO PATTERN |4.1.2 |a|| | 1 |
| Brake valve leaking such that brake functionality is affected rear brake load sensing valve |1.1.7 |d| |ii|| | 1 |
| Front Prop shaft bearing housing insecure bearing |6.1.7 |f| |i|| | 1 |
| Offside Rear Dropside cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sills |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch to floor |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering Stop testing due to heavy corrosion in rear suspension area |6.1.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded sill and inner step area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded iner wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail to subframe mount |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis brace |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheeel arch to floor |2.4.A.3| | 1 |
| Rear position lamp|s| incorrect colour Both sides |1.1.A.3e| | 1 |
| Offside Rear Direction indicator incorrect colour lens broken showing white light |1.4.A.2f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rear off leaf spring |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside front to offside rear (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside front to nearside rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/lower outer wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch at rear |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage Rear view mirror. |6.1.C.1| | 1 |
| Offside Direction indicator not working All offside indicators not working on hazard lights. |4.4.1 |a| |ii|| | 1 |
| Offside Rear Rear reflector missing From frame work. |4.8.2 |a| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floors/inner sills/outer sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Offside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired under arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired under sill back x 2 |2.4.A.3| | 1 |
| Nearside Front Front suspension has excessive movement at a suspension ball joint joint housing/hub worn |2.5.A.1c| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired chassis |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch/inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under arch x 2 |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement badly split |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill back |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired under sill back |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under sill back x 3 |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis under seat |5.2.6| | 1 |
| Offside Front Body has a sharp edge caused by corrosion chasis under bonnet |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion chasis mounting |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion innersill |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner vallance |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner vallance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch shock mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis on load compensator mount (1.1.21 (e) (i)) | 1 |
| Nearside Rear Brake prescribed area is inadequately repaired plate lifting on brake compensentator mount (1.1.21 (e) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking engine area (6.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis under bonet (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger in front of wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired outer sill spot welded (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step/ inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and from under bonnet by gear box mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg under bonnet and under vehicle |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch and bulk head area |3.6.C.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back cross member |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner rear sills |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner rear sills |5.2.6| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush `D` bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush `D` bush |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of arch |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion light mounting bar |6.1.C.1| | 1 |
| Offside Front Body insecure and dangerous to other road users body mounting bolt loose |6.1.B.1b| | 1 |
| Nearside Body insecure and dangerous to other road users centre body mounting bolt loose |6.1.B.1b| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing above engine cross member mounting(chalked) (6.1.1 (c) (i)) | 1 |
| Anti-roll bar fractured |2.4.G.1| | 1 |
| Rear Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings outer sill +_inner arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill,sill end and outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill ,sill end and outrigger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing in wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing to chassis in wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger section holed |5.3.6 |a| |i|| | 1 |
| Nearside Other passenger door likely to open inadvertently or not remain closed in the case of a sliding door side loading door (6.2.3 (b) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Nearside Front Road wheel fixing missing nut missing/ stud snapped |5.2.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch area heavily corroded in multiple areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/ arch area heavy corrosion to multiple areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/ step/ inner and outer sills heavy corrosion to multiple areas |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/ step/ inner and outer sills heavily corroded in multiple areas |7.1.1 |a| |i|| | 1 |
| Front Lower front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer body sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer body sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step marked with yellow chalk |5.2.6| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch x 2 marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill x2 marked with yellow chalk |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded lower step marked with yellow chalk |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step lower x2 marked with yellow chalk |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill x5 marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member x 3 marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger x2 marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger x2 marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill x2 marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill x2 marked with yellow chalk |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside front chassis inner arch in places |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired offside front inner sill not seam welded |5.2.6| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired offside rear inner sill not seam welded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear outrigger near shocker in places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear inner arch/floor near shocker in places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear outer chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outrigger spring area in places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis & back panel in places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear inner sill in places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outer chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outrigger |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp indicator makes sidelight flash |1.1.A.3f| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill hole |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded center sill hole |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill hole |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded both sides inner sills |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides outriggers |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner valance behind bumper |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded load floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner valance behind bumper |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded load floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/ outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill / wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch, outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering nearside |6.1.1 |c| |ii|| | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering offside |6.1.1 |c| |ii|| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp With brake & indicator bulb |1.1.A.3f| | 1 |
| Front Exhaust has a major leak of exhaust gases Silencer |7.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear off spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear off spring (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired upper strut area wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing within the perscribed area |2.4.A.3| | 1 |
| Front Windscreen wiper missing |3.4 |a|| | 1 |
| Offside Drive shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill x2 |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded and offside chassis |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/f outer sill holed |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s inner sill holed |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s inner sill holed |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r chasis crodd member holed |2.4.A.3| | 1 |
| Brake load sensing valve linkage defective and function impaired rod missing |3.6.E.3| | 1 |
| Offside Rear Rear fog lamp emits a light other than red lense cracked |1.3.2e| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner sill |2.1.2 |e| |i|| | 1 |
| Nearside Front Inner Steering component mounting prescribed area is excessively corroded wheel arch |2.1.2 |e| |i|| | 1 |
| Offside Front Wheel stud|s| missing broken |4.2.A.1e| | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted Bumper front quarter (6.1.4 (a) (i)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower arch |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x1 |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Body has a projection caused by damage osf to rear inner sile corroded in number of different places |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion inner wing corroded |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion ns inner sile coroded |6.1.C.1| | 1 |
| Nearside Front Body has a projection caused by corrosion inner wing corroded |6.1.C.1| | 1 |
| Nearside Front Wheel nut|s| missing X1 |4.2.A.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and rear panel |2.4.A.3| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded chassis/panel |2.4.A.3| | 1 |
| Bonnet primary retaining device ineffective UNABLE TO OPEN, NO ITEMS CHECKED, WILL NEED TO BE CHECKED UPON RETEST (3.1 (c)) | 1 |
| Power steering component leaking RACK AREA (2.1.5 (a)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG TO OUTRIGGER (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing excessively worn Rear support bearing (6.1.7 (b) (i)) | 1 |
| Entrance/exit door emergency control inoperative inner handle broken |6.2.C.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner |6.1.1 |c| |i|| | 1 |
| Offside Front Sub-frame attachment bracket/mounting likely to fail Rusted no longer attached rick of engine falling |5.3.3 |b| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner and outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner and outer sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind hanger |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases at rear |emissions not tested| |7.1.2| | 1 |
| Rear Vehicle Identification Number not legible |0.2 |b|| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion X2 |6.1.C.1| | 1 |
| Braking system leaking engine bay |3.6.A.1| | 1 |
| Lower Steering column shaft retaining device missing |2.1.6| | 1 |
| Offside Front Direction indicators not in good working order |function impaired| |1.5.A1b| | 1 |
| Nearside Front Fuel tank insecure rear tank strap corroded |7.2.1| | 1 |
| Offside Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both d bushs |2.4.G.2| | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both |2.4.G.2| | 1 |
| passenger door catch missing |6.2.B.2| | 1 |
| Emissions not tested engine running on because of oil |7.3.A.1| | 1 |
| Exhaust emits excessive smoke or vapour of any colour blue |7.4.B.4| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis and inner wing panel under bonnet |6.1.A.1| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing panel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer silll |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering shock tower holed |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch in two places |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis in wheel arch |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch in two places |6.1.B.2| | 1 |
| Front Fuel system component leaking engine area |7.2.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill + outer sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis + out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted arch + floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded arch + floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear out rigger / chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner + outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch+ floor |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp when brake applied front side lights come on |1.1.A.3f| | 1 |
| Nearside Front Suspension arm fractured |2.4.G.1| | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced shocker housing (6.1.1 (c) (i)) | 1 |
| Offside Front engine mounting missing |6.1.D.1a| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings second last cross member |6.1.B.2| | 1 |
| Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint Centre Bearing on prop shaft |2.4.G.4b| | 1 |
| Offside Headlamp not working on dipped beam sidelamp |1.7.5a| | 1 |
| Offside Front Body component corroded and likely to cause injury sill and inner step areas |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear panel, behind leaf spring mounting areas |5.3.6 |a| |i|| | 1 |
| Stop lamp|s| not working hi level |4.3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases 2nd silencer holed |6.1.2 |a|| | 1 |
| Offside Front Brake pipe inadequately supported brake hose insecure |3.6.B.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill /step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis front spring hanger rear spring |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear shocker mount |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Centre Rear Brake rod excessively damaged and seriously weakened |3.5.1e| | 1 |
| Rear Brake hose stretched |3.6.B.4c| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor. |6.1.B.2| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side in engine bay (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 1 |
| Offside Rear Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 1 |
| Electrical wiring damaged and bare wires exposed tow socket wiring |1.9.2c| | 1 |
| Nearside Body has a sharp edge caused by damage toolbox |bolts| |6.1.C.1| | 1 |
| Offside Brake cable has wires broken and is significantly weakened snapped |3.5.1b| | 1 |
| Front Bonnet cannot be secured in the closed position bonnet catch missing |8.4.1| | 1 |
| Offside Front Bonded suspension unit attachment fractured |2.4.F.1b| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp and offside |1.2.1f| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill and inner step |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear bush in arm |2.4.G.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at bump stop |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at bmp stop |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch x1 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch x3 |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x1 |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis to subframe |2.4.A.3| | 1 |
| front brakes release unevenly 90% out of balance |3.7.B.4| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch top strut mount area marked with chalk (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing in 2 areas (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering engine mounting area |6.1.A.1| | 1 |
| Offside Outer Body has a projection caused by damage |6.1.C.1| | 1 |
| Offside Inner Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill Panel |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Back Bush |2.4.G.2| | 1 |
| Offside Front Upper Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner,outer sill and chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner,outer sill and chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear spring mountings / rear panel cross member. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor / spring mounting. (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strut mount (5.3.6 (a) (ii)) | 1 |
| Brake performance not tested leaking |1.2.1 |g|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (leaf spring mount) (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (leaf spring mount) (5.3.6 (a) (ii)) | 1 |
| Front Engine mounting bracket damaged or deteriorated resulting in excessive movement Engine mount crossmember has corrosion & holed (6.1.8 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis sections |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis sections |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded well archs/ chassis sections |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded well arch/ chassis sections |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to chassis sections |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch to chassis sections |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded door step /sill section |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill section |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front chassis section under vehicle .badly corroded and holed |2.4.A.3| | 1 |
| Fuel tank insecure metal strap missing |7.2.1| | 1 |
| Central Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced support beam |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced support beam |6.1.1 |c| |i|| | 1 |
| Nearside Front Sub-frame worn and seriously weakened sill
|2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis extension section |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger mounting; marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill; marked in yellow |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member; marked in yellow |6.1.B.2| | 1 |
| Exhaust emits excessive smoke or vapour of any colour +idel |7.4.B.4| | 1 |
| Headlamp does not operate immediately when selected on main beam offside+nearside |1.7.4a| | 1 |
| Headlamp does not operate immediately when selected on dipped beam offside+nearside |1.7.4a| | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps offside+nearside |1.7.4b| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams stay on |1.7.4b| | 1 |
| Fuel system component leaking + return pipes |7.2.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by chassis box corroded by main leaf mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near x member corodded by main leaf mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting support mounting corr ded by main leaf mounting (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced not bright |1.7.5a| | 1 |
| Offside Front Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |
| Front Vehicle structure is fractured and structural rigidity is significantly reduced both side (6.1.1 (a) (i)) | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced both side (6.1.1 (a) (i)) | 1 |
| Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Front Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Clip broken (6.1.7 (g) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg next to gearbox mount (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg next to engine mount (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under inner wheel arch |6.1.A.1| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering engine compartment (6.1.1 (c) (ii)) | 1 |
| Central Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected spring mount front (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected spring mount rear (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected rear moumt spring (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected spring mount front (5.3.6 (a) (ii)) | 1 |
| Offside Suspension arm insecure |2.4.G.1| | 1 |
| Nearside Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind subframe. |5.3.6 |a| |i|| | 1 |
| Position lamp not working O/S REAR |4.2.1 |a|| | 1 |
| Rear fog lamp not working O/S REAR |4.5.1 |a| |ii|| | 1 |
| Headlamp insecure N/S |4.1.1 |c|| | 1 |
| Steering linkage ball joint has excessive play N/S FRONT LOWER BALL JOINT |2.1.3 |b| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced N/S & O/S OUTER SILLS |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced N/S & O/S INNER SILLS |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S INNER & OUTER SILLS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S REAR CHASSIS SPLIT & CORRODED |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S REAR OUT RIGGERS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/S REAR OUT RIGGERS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR CROSSMEMBER N/S & O/S |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S REAR INNER ARCHs |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S FRONT INNER ARCH |5.3.6 |a| |i|| | 1 |
| Nearside Ball joint has excessive play Rack end? |2.2.B.1f| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S,N/S OUTER CHASSIS, near inner wheel arches |6.1.B.2| | 1 |
| Nearside Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced OUTER CHASSIS, near inner wheel arch |6.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing adjacent to strutt top mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg (5.3.6 (a) (ii)) | 1 |
| Offside Front Sub-frame corroded and seriously weakened Engine cradle subframe (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top strut mount area (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure front tank strap snapped |7.2.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail holed at bottom |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill holed adjacent rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings adjacent front spring hanger |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch on strut tower |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/strut top mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing / strut top mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/ rear spring front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis /rear spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis /rear spring mounting front mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing /chassis subframe rear mounting |2.4.A.3| | 1 |
| Offside Front brake caliper securing device loose caliper bolt loose |3.5.1j| | 1 |
| Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush pulled out allowing wishbone arm to rub on subframe |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/boot floor |2.4.A.3| | 1 |
| Nearside Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Inner Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Anti-lock braking system component missing sensor |3.4.2| | 1 |
| Nearside Rear Anti-lock braking system wheel speed sensor missing (1.6 (c)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wing top |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wing |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Out rigger |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Out rigger |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury Wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded rigger support section |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded rigger support section |2.4.A.3| | 1 |
| Offside Front Suspension arm attachment bracket/mounting insecure rear bolt |2.4.G.1| | 1 |
| Offside Front Speedometer dial glass broken |6.7.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat frame excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill and door step (7.1.1 (a) (i)) | 1 |
| Rear Direction indicator not working both sides |1.4.A.2c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |upper| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis|upper| |2.4.A.3| | 1 |
| Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings 10 holes need attention under car |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded around rear mount marked white chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around rear mount marked white chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear off spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear off spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at front off spring |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at fuel tank |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at the rear of the spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at the rear of the spring |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under the wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under the wheel arch |2.4.A.3| | 1 |
| Nearside Front Brake pipe excessively damaged chassis |1.1.11 |c|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis sub frame mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting |5.3.6 |a| |i|| | 1 |
| Front Outline marker lamp not working both |4.2.1 |a|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded wheel arch |3.6.C.3| | 1 |
| Central Rear Seat belt insecurely fixed to the seat belt anchor point |5.2.1a| | 1 |
| Nearside Rear Seat belt insecurely fixed to the seat buckle strap |5.2.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg behind rear wheel 2 places (5.3.6 (a) (ii)) | 1 |
| Nearside Body component corroded and likely to cause injury deck (6.2.1 (a) (i)) | 1 |
| Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement both |2.4.B.2| | 1 |
| Anti-roll bar pin or bush likely to become detached bolt loose |5.3.4 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member at anchor pin mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre rib (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both D bushes |5.3.4 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2nd from rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Body component corroded and likely to cause injury cock rail |6.2.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg holed . |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded chassis leg holed at rear of front subframe mtg . |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded chassis leg holed at rear of front subframe mtg . |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door sill . |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg badly holed . |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis holed in two places plus very weak . |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at front spring hanger . |2.4.A.3| | 1 |
| Fuel tank insecure Rear strap broken |7.2.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step 2 places |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Strut top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Strut top |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shocker mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis leg along from gearbox mounting |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis at load bearer |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis at load bearer at fuel tank |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front spring mounting |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired spring hanger |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded chassis leg at front hanger |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded sill / lower step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and rear cross member |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to chassis corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount x 2 |6.1.B.2| | 1 |
| Offside Front Steering component mounting prescribed area is fractured |2.2.C.1h| | 1 |
| Central Rear Prop shaft bearing excessively worn marked yellow (6.1.7 (b) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at macpherson strut top mounting area visible from inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp lens seriously defective weathered (4.1.1 (b) (ii)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Load valve sensor |3.1.9| | 1 |
| Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Fuel tank insecure broken support strap |7.2.1| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Front position lamp|s| not working both roof markers |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x9 holes |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x7 holes |2.4.A.3| | 1 |
| Fuel system component leaking fuel injector areas |7.2.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill, several places, front and rear of leaf spring |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings on inner sill corrosion |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner sill corrosion |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner sill corrosion |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner wheel arch corrosion |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner sill corrosion next to back axel
l |6.1.B.2| | 1 |
| Nearside Front Macpherson strut has excessive movement at the upper attachment strut top |2.5.A.1c| | 1 |
| Nearside Inner Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Offside Outer Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Nearside Outer Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Offside Headlamp not working on dipped beam side light
|1.7.5a| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner + outer sills (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner +outer sills (6.1.1 (c) (i)) | 1 |
| Halfshaft bolt missing |4.2.B.3| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement n/s + o/s |2.4.G.2| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arche |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate value 0.68 (8.2.2.2 (a)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect Note : headlamp reflector seems to have movement (4.1.2 (c)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.20 mean recorded , manufacturers plate limit is 0.68 (8.2.2.2 (a)) | 1 |
| Centre Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Rear Emergency exit window ???break glass` hammer missing |6.2.D.2| | 1 |
| Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing 3rd row 7th belt |5.2.2a| | 1 |
| Rear reflector not red in colour offside rear lense |1.5.1d| | 1 |
| Exhaust system not adequately supported front flexi |7.1.1| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear most |2.4.G.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded various parts under vehicle corroded |2.4.A.3| | 1 |
| Nearside Exhaust has a major leak of exhaust gases flexi |7.1.2| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Arch Area Front & Rear (6.2.2 (d) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Rear Inner Sill & Central Outer Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Arch Area (6.2.2 (d) (i)) | 1 |
| Rear Prop shaft bearing excessively worn Hanger Bearing Worn (6.1.7 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch/chassis area. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill area corroded and perforated, front of rear spring mounting area. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of rear spring mounting area. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of rear spring mounting area. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill front of rear spring mounting area. |5.3.6 |a| |i|| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded inner & outer sills / door step |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded inner & outer sills / door step |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded Inner wing to floor |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded Inner wing to floor |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis & outrigger |2.4.A.3| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting modified and seriously weakened |2.4.A.2| | 1 |
| Offside Rear Lower Anti-roll bar pin or bush excessively worn bolt slightly loose and causing excessive movement (5.3.4 (a) (i)) | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated centre bearing rubber has failed (6.1.7 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and step area (7.1.1 (a) (i)) | 1 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp fault on all rear lights |1.4.A.2h| | 1 |
| Exhaust has a major leak of exhaust gases exhaust box split |7.1.2| | 1 |
| Other passenger door cannot be opened from outside the vehicle side load door (6.2.3 (a)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Emergency exit door cannot be opened from outside the vehicle side door (9.1.2 (a)) | 1 |
| Fuel system component leaking TANK (6.1.3 (b) (i)) | 1 |
| Central Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Stop lamp not working All rear stop lamps |1.2.1b| | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction Phone holder (3.1 (a) (ii)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury Light Cluster (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 1 |
| Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Nearside Front Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn all (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure "d" bushes (5.3.3 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` x4 |8.3.1b| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` x3 |8.3.1b| | 1 |
| Rear engine mounting deteriorated resulting in excessive movement REAR ENG MOUNT |6.1.D.1a| | 1 |
| Offside Rear Braking system leaking from brake drum |3.6.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded wheel well |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel well |5.2.6| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section by spring hanger and box section of rear bumper |6.1.B.2| | 1 |
| Centre Lower Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Headlamp aim not tested both sides |1.8.A.1c| | 1 |
| Nearside Front Track rod end seriously misaligned inner rack joint bent |2.2.C.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill as marked |2.4.A.3| | 1 |
| Nearside Front Steering system lock to lock check twists a brake hose |2.2.D.2b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step and inner sill |5.2.6| | 1 |
| Rear Stop lamp(s) all not working both (4.3.1 (a) (iii)) | 1 |
| Rear Lower Braking system leaking |3.6.A.1| | 1 |
| Rear Body panel corroded and likely to cause injury tipper body - as chalked. |6.2.1 |a| |i|| | 1 |
| Hazard warning switch inoperative *missing* |4.4.2 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - as chalked. |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength as chalked. |5.3.6 |a| |i|| | 1 |
| Offside Rear fog lamp emits a light other than red damaged |1.3.2e| | 1 |
| Offside Rear Direction indicator incorrect colour damaged |1.4.A.2f| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner / outer step |5.2.6| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury inner and outer (6.2.8 (a) (ii)) | 1 |
| Front Exhaust system insecure joint (6.1.2 (a)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill to Step |5.2.6| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/inner wing (5.3.6 (a) (i)) | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting x member (6.1.6 (i) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded behind bumper |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner & outer step sills |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner & outer step sills |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner & outer sills |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering @ rear compensator |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chsis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring/sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle end of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle end of spring |2.4.A.3| | 1 |
| Fuel pipe leaking spill rail |7.2.3| | 1 |
| Offside Outer Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring front and rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring front and rear |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill - as chalked. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill by body mount and suspension mount (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both side (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring shackle mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring shackle mounting |2.4.A.3| | 1 |
| Front front brakes release unevenly offside slow |3.7.B.4| | 1 |
| Offside Front Upper Steering column top bearing excessively worn |2.1.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and outriggers in many places |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and outriggers in many places |6.1.B.2| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis and outriggers |6.6.6| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp when fog light applied |4.2.3 |c|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp when fog light applied |4.4.3 |b|| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp when indicator applied |4.2.3 |c|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced a panel |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis outrigger |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement at g/box |6.1.8 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension arm pin or bush likely to become detached rear bush (5.3.4 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Rear Upper Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Inner Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Inner Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded at rear step/door sill section |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded at forward inner sill /step section and box section within prescribed area of seat belt anchor seat runner mounting |5.2.6| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded at forward step/inner wheel arch/box section within prescribed area of seat belt anchor forward seat runner mounting |5.2.6| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded at mounting and chassis leg towards wheel arch |2.4.A.3| | 1 |
| Emissions not tested due to excessive leak (8.2.2.2 (e)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength also on front cross member (5.3.6 (a) (i)) | 1 |
| Brake pivot has restricted free movement Park brake (1.1.15 (e)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all 4 ends off rear leaf springs top and bottom of chassis rails and crosmembers 6 places in total as marked |5.3.6 |a| |i|| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both inner sill |6.1.B.2| | 1 |
| Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both inner arch`s |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering step section |6.1.1 |c| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing near spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at rear (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at rear (7.1.1 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quarter |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch 2 points |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill 3 points |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Brake load sensing valve linkage defective and function impaired Balance valve pivots seized |1.1.17 |a|| | 1 |
| Rear Exhaust system insecure Rubber mount |6.1.2 |a|| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Swivelling towbar swivel pin insecure |6.6.5a| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner outer sill step area (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner outer sill step area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quater pannel area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quater pannel area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis floor area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch area (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion with in 30 cm of leaf spring mount point (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion with in 30 cm of leaf spring mounting point (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion 30 with in cm of seat belt mounting pint and fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corrosion with in 30 cm of engine mounting point (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Anchor (5.3.6 (a) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion inadequately repaired |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over rear axle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over rear axle |6.1.B.2| | 1 |
| Nearside Rear Leaf spring missing and directional control affected (5.3.1 (c) (ii)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded with in 30 cm of rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded with in 30 cm of front spring hanger |2.4.A.3| | 1 |
| Fuel system component leaking Pump leaking |7.2.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear leaf spring, rear shackle mount. |6.1.A.1| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Within 30cm of o/s/r front sring mounting. |6.1.B.2| | 1 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear cross member has a large hole cause by corrosion - marked with chalk |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger has a hole within 30 cm to rear leaf spring hanger - marked with chalk |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger has a hole within 30 cm to rear leaf spring hanger - marked with chalk |6.1.B.2| | 1 |
| Nearside Rear Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded inner chassis around compensator |3.1.9| | 1 |
| Offside Front Outer Obligatory mirror missing door |8.1.1| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner chassis/cross member |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn arm/hub ball joint (5.3.4 (a) (i)) | 1 |
| Power steering component|s| leaking from unknown area |2.3.3b| | 1 |
| Front Headlamp not working on main beam nearside and offside |1.7.5a| | 1 |
| Nearside Obligatory mirror missing glass |8.1.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under foot step inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under the wheel arch and behind the the wheel |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced top sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing
|2.4.A.3| | 1 |
| Front Power steering component leaking |2.1.5 |a|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nearside front inner sills and outer sills corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting offside front inner sill and outer sills corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside front chasis (6.2.2 (d) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor panel |6.1.B.2| | 1 |
| Rear Body has a sharp edge caused by corrosion cross member |6.1.C.1| | 1 |
| Emissions not tested engine oil light on |7.3.A.1| | 1 |
| Windscreen in an unacceptable condition Badly cracked (3.2 (c) (i)) | 1 |
| Offside Body component damaged and likely to cause injury Mirror covers badly damaged (6.2.1 (a) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury Mirror covers badly damaged (6.2.1 (a) (i)) | 1 |
| Offside Front Direction indicator lens defective such that the emitted light is adversely affected Flasher lamp lens broken (4.4.1 (b) (ii)) | 1 |
| Steering locking device ineffective Loose (2.1.3 (d)) | 1 |
| Offside Power steering component fouling Steering rack arm badly bent (2.1.5 (e) (i)) | 1 |
| Nearside Front Brake hose excessively twisted Rubbing suspension (1.1.12 (b) (ii)) | 1 |
| Nearside Body has a sharp edge caused by damage Mirror outter plastic cover missing |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by damage Mirror outter plastic cover missing |6.1.C.1| | 1 |
| Nearside Body component damaged and likely to cause injury Mirror rear cover |6.2.1 |a| |i|| | 1 |
| Offside Body component damaged and likely to cause injury Mirror rear mirror |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mountin |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mountin |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion all rear wheel arches |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases centre insecure |7.1.2| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner/outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength LEAF SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength LEAF SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury OUTER SEAL ALSO WITHIN 30CM OF SUSPENSION MOUNT |6.2.1 |a| |i|| | 1 |
| Rear Front drive shaft coupling bearing fastener insecure |2.5.C.2b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded INNER STEP |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Stop lamp(s) not working corroded earth (4.3.1 (a) (ii)) | 1 |
| Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting. |5.2.6| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting by the brake compensator |6.2.2 |d| |i|| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting X member (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X member & inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Other passenger door cannot be opened from outside the vehicle SIDE DOOR (6.2.3 (a)) | 1 |
| Nearside Front Leaf spring to axle securing bolt insecure |2.4.B.7b| | 1 |
| Central Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Stop lamp(s) not working BOTH SIDES (4.3.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outriger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower inner 1/4 |2.4.A.3| | 1 |
| Nearside Inner Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mounting point |6.1.B.2| | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced inner wing (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced inner wing (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced jacking point (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced step area (6.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded behind drivers seat |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded passenger step underside |5.2.6| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind cab |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage plastic end cap missing |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sil |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear valance |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mounting |6.1.B.2| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor support |6.1.B.2| | 1 |
| Rear Exhaust system not adequately supported box |7.1.1| | 1 |
| Offside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail top and side (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail top (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back quater panel |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance |5.3.6 |a| |i|| | 1 |
| Power steering malfunctioning very rough near full lock |2.3.3a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring outer anchor bracket |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill front to rear |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill front to rear |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back quater panel to chassea |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassea |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch in areas |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill front to rear |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded quater panel to chassea |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassea in places |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch chassea |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near suspension near leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Centre passenger door cannot be opened from outside the vehicle side loading |6.2.B.1c| | 1 |
| Electrical wiring insecure and in contact with sharp edges Main power cable for winch passes through sharp edge of cab body with no protective grommet (4.11 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS HOLED AND CORRODED (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS HOLED AND CORRODED (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill by spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 1 |
| Offside Outer Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Power steering component|s| leaking rack + pipes |2.3.3b| | 1 |
| Nearside Body component corroded and likely to cause injury rear step |6.2.1 |a| |i|| | 1 |
| Brake pipe likely to become detached or damaged From master (1.1.11 (d) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear arm bolt mount (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Drivers step (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint likely to become detached Fitted incorrectly (5.3.4 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner arch rear bolt mounting (5.3.6 (a) (i)) | 1 |
| Nearside Outer Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Exhaust has a major leak of exhaust gases rear section missing (6.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis member near top shocker mount |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp brake light |1.1.A.3f| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holled m,arked with yellow chalk |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shackle |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step area |6.1.B.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underarch |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside and offside front inner step area |6.2.2 |d| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate limit 0.68 @1.39 average (8.2.2.2 (a)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected Battery terminals (Came off during test when going over roller brake tester) (4.11 (a) (ii)) | 1 |
| Offside Rear fog lamp missing LED strip lamps fitted, can not find rear fog (4.5.1 (a) (ii)) | 1 |
| Offside Rear fog lamp not working LED strip lamps fitted (4.5.1 (a) (ii)) | 1 |
| Fuel tank insecure Rear mounting strap broken (6.1.3 (a) (i)) | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 1 |
| Offside Rear Window in an unacceptable condition |3.2 |c| |i|| | 1 |
| Nearside Outer Body panel insecure panel lower |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength valance |5.3.6 |a| |i|| | 1 |
| Nearside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out riger |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis at rear of subframe |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at front spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring hanger |2.4.A.3| | 1 |
| Central Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded box section in various places |3.1.9| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door step and inner sill (7.1.1 (a) (i)) | 1 |
| Rear Leaf spring shackle pin or bush excessively worn n/s and o/s (5.3.4 (a) (i)) | 1 |
| Central Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Parking brake lever has no reserve travel front cable broken |3.1.6b| | 1 |
| Rear Leaf spring shackle pin or bush excessively worn n/s and o/s |5.3.4 |a| |i|| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp bad earth all lights flashing with indicator |1.2.1f| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded o/s n/s outer sills front to rear |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis out-rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out-rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis out-rigger to inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded out rigger/inner wing |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre chassis out-rigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre chassis out-rigger |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member at spare wheel carrier |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg in engine bay |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both spring hangers |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shock mount |5.3.6 |a| |i|| | 1 |
| Fuel system component insecure neck |7.2.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired rear |2.4.A.3| | 1 |
| Fuel cap/sealing device mounting flange/sealing method defective rubber boot over top |7.2.4c| | 1 |
| Nearside Rear Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i)) | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember at rear spring hangar |6.1.B.2| | 1 |
| Central Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, near foremost leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember near rearmost leaf spring mount (5.3.6 (a) (i)) | 1 |
| Headlamp aim not tested due to not working |4.1.2 |b|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorbeer |2.4.A.3| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both indicators (4.4.3 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sills. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mounting areas and floor (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mounting area and floor (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
| Exhaust fumes entering cabin |6.1.2 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength centre of leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength centre of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired floor area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre under sill area, spring mount prescribed area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area, inner door panel, rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by damage bumper cover |6.1.C.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner door step sill |6.1.C.1| | 1 |
| Centre Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis rear cab |6.1.B.2| | 1 |
| Centre Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis cross member |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| not working top |1.1.A.3b| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint wrong bolt fitted |2.4.G.2| | 1 |
| Offside Inner Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp |1.5.1e| | 1 |
| Offside Inner Front Suspension arm has excessive play in a pin/bush |2.4.G.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |under bonnet| |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner to outer sill |7.1.1 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member in several places |5.3.6 |a| |i|| | 1 |
| Nearside Leaf spring anchor bracket insecure |5.3.1 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength top inner wing |5.3.6 |a| |i|| | 1 |
| Offside Subframe mounting prescribed area is inadequately repaired centre chassis |5.3.6 |a| |i|| | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab body |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength lower chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake pipe inadequately clipped from nearside flex to master cylinder |3.6.B.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to rear bulkhead |5.2.6| | 1 |
| Nearside Rear Brake pipe inadequately clipped on axle |3.6.B.1| | 1 |
| Central Rear Upper Stop lamp|s| with a multiple light source more than 1/2 not functioning high level stop lamp LED |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis area chalked |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush rear most |2.4.G.2| | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panels both sides |6.1.B.2| | 1 |
| Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panels both sides |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill Step |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Rail|Above Bump Stop| |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Rail|Above Bump Stop| |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Box Section |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Box Section |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel Arch Chassis Rail |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring Hanger Box Section |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring Hanger Box Section |6.1.B.2| | 1 |
| Offside Rear Leaf spring fractured around front eye |5.3.1 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of wheel |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer side of chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer side of chassis |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking engine bay area |7.2.3| | 1 |
| Fuel tank insecure strap broken* |7.2.1| | 1 |
| Nearside Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassis engine bay side |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill & step |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2 places| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill extensive corrosion |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring anchor box area |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step x2 (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury outter sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outriger |6.1.1 |c| |i|| | 1 |
| Track rod end ball joint has excessive play both front |2.2.B.1f| | 1 |
| Nearside Inner Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Nearside Outer Front Obligatory mirror missing |8.1.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis and inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced multiple areas |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced multiple areas |7.1.1 |a| |i|| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush all exsess play |2.4.G.2| | 1 |
| Nearside Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii)) | 1 |
| Offside Front Inner Integral body structure modified such that structural rigidity is significantly reduced Sill complete (6.1.1 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel into inner wing |6.1.B.2| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above cross member |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / inner sill and wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger and floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / outrigger (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills |6.1.1 |c| |i|| | 1 |
| All position lamps not working both sides of body |1.1.A.3b| | 1 |
| Nearside Inner Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Leaf spring to axle securing bolt insecure |2.4.B.7b| | 1 |
| Fuel cap/sealing device ineffective faulty lock / wont readily open (6.1.3 (b) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab by seat mount (6.2.2 (d) (i)) | 1 |
| Nearside Stop lamp|s| showing white light to the rear lens smashed |4.3.3 |a| |ii|| | 1 |
| Offside Front Body panel corroded and likely to cause injury Wings corroded (6.2.1 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury Wing corroded (6.2.1 (a) (i)) | 1 |
| Offside Rear fog lamp with a multiple light source more than 1/2 not functioning (4.5.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis badly corroed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis badly corroded (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Cab floor corroded holed (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger front step badly corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in engine compartment chassi (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced underside chassi (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Floor excessively deteriorated step corroded (6.2.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Top shock absorber mounting area |2.4.A.3| | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected Side light |4.4.1 |b| |ii|| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view Cover missing |3.3 |b| |ii|| | 1 |
| Nearside Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch to floor |6.1.1 |c| |i|| | 1 |
| Nearside Inner Lower Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Lower Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Front Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Inner Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front position lamp|s| not working Nearside |1.1.A.3b| | 1 |
| Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Bottom ball joint |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill step |5.2.6| | 1 |
| Nearside Inner Rear Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 patches marked |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH/CHASSIS (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL AND OUTRIGGER (front spring mount) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER and OUTER SILLS (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLITCH PANEL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLITCH PANEL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING HANGER (rear) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis lower (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded cross member behind drivers step |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced strut turret |6.1.1 |c| |i|| | 1 |
| Inner Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength of rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger |6.1.1 |c| |i|| | 1 |
| Prop shaft bearing housing insecure 2nd |6.1.7 |f| |i|| | 1 |
| Front Fuel system component leaking engine |7.2.3| | 1 |
| Offside Front Brake prescribed area is excessively corroded Inside wheel arch on chassis leg next to brake pipe mounting area |1.1.21 |e| |i|| | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded Offside underside of chassis below end of cab near handbrake cable mount also comes into seat belt mount area |1.1.21 |e| |i|| | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded Nearside underside of chassis below end of cab above fuel tank near handbrake cable mount also comes into seat belt mount area |1.1.21 |e| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/ end of sill has a hole caused by corrosion (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under cab step has a hole caused by corrosion (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury tipper bed side step is heavily corroded, and has sharp protruding edges (6.2.1 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear sill and inner body |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area |5.3.6 |a| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area x2 |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step area x2 |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear many chalked areas |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis marked |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Subframe mounting area (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Seat mount |5.2.6| | 1 |
| Exhaust emissions exceed manufacturers specified limit Test limit 1.16 Test result 6.80 (8.2.2.2 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded near leaf spring marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded near leaf spring marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail near rear arch corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail near rear arch corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Leaf spring main leaf fractured Front eye broken (5.3.1 (b) (ii)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of spring hanger. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to the right of spring hanger. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of spring hanger. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear most spring hanger. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to left of spring hanger. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch,lower |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings meets outer sill. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing to chassis, |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top under bonnet, |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on the out sides, |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in two major places as marked, |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger in front of spring shackle |for most one| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger x two adjacent to n/s/r spring shackle |rear most|. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind spring shackle out rigger & floor holed, |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill meets inner sill split, not connected. |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x two places, |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind out rigger in corner, |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step corroded |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of rear wheels |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in front of rear wheels |2.4.A.3| | 1 |
| Nearside Front Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded lower rear of cab. |5.2.6| | 1 |
| Offside Front All position lamps excessively deteriorated so that they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT EYE MOUNT |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FRONT EYE MOUNT |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR EYE MOUNT |2.4.A.3| | 1 |
| Stop lamp not working ALL |1.2.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Step |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Offside Front Statutory seat belt missing stoke missing |5.1.1| | 1 |
| Front All position lamps not working upper cab both |1.1.A.3b| | 1 |
| Seat belt not functioning as intended centre belt (7.1.2 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch rearmost,out rigger aera more than 1 place |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner behind bumper next to cross member area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch floor pan |2.4.A.3| | 1 |
| Fuel system component leaking near starter motor |7.2.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member marked |2.4.A.3| | 1 |
| Offside Front Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
| Nearside front brake grabbing severely |3.8.A.2b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill |6.1.B.2| | 1 |
| Front Anti-roll bar pin or bush excessively worn Nearside & Offside |5.3.4 |a| |i|| | 1 |
| Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Nearside & Offside steps/sills |6.2.2 |d| |i|| | 1 |
| Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Nearside & Offside arches |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced rear of sill (7.1.1 (a) (i)) | 1 |
| Nearside Outline marker lamp not working several (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working several (4.2.1 (a) (ii)) | 1 |
| Nearside Front All position lamps not working Marker |1.1.A.3b| | 1 |
| Nearside Front Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Centre Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 1 |
| Offside Rear Axle has excessive vertical movement between stub axle and axle beam (5.1.2 (c) (i)) | 1 |
| Offside Front Drivers door catch insecure drivers (6.2.3 (c) (ii)) | 1 |
| Hazard warning switch faulty near side hazards not working |1.4.B.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill at leaf spring hanger |2.4.A.3| | 1 |
| Nearside Body component corroded and likely to cause injury body step (6.2.1 (a) (i)) | 1 |
| Nearside Track rod end ball joint has excessive play lock nut loose (2.1.3 (b) (i)) | 1 |
| Front Bonnet primary retaining device insecure (3.1 (c)) | 1 |
| Rear Towbar component defective shoket (6.1.6 (a)) | 1 |
| Offside Front Body panel likely to become detached (6.2.1 (a) (ii)) | 1 |
| Nearside Rear Shock absorbers likely to become detached |5.3.2 |a| |ii|| | 1 |
| Nearside Rear Position lamp showing white light to the rear lens craket |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Stop lamp(s) emits other than a steady red light lens craket (4.3.3 (a) (ii)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced x3 (7.1.1 (a) (i)) | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected Damaged (4.4.1 (b) (ii)) | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre corroded and holed |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area holed (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area holed (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door piller too sill |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded under sill holed |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch area holed x2 |2.4.A.3| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle sliding / unable to check rear seat belts |6.2.B.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting point |2.4.A.3| | 1 |
| Offside Front Braking system leaking caliper/ brake hose area |3.6.A.1| | 1 |
| Bonnet cannot be secured in the closed position cannot open bonnet to gain access to under bonnet items |8.4.1| | 1 |
| Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Outline marker lamp not working Front and rear (4.2.1 (a) (ii)) | 1 |
| Front position lamp|s| not working Nearside & offside |1.1.A.3b| | 1 |
| Rear position lamp|s| not working Nearside & offside |1.1.A.3b| | 1 |
| Electrical wiring deteriorated and bare wires exposed At compressor |1.9.2c| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Floor area |5.2.6| | 1 |
| Side repeater incorrect colour nearside and offside (4.4.3 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner step area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre floor |6.1.B.2| | 1 |
| Offside Rear Direction indicator not working earth fault |1.4.A.2c| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all cill |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Leaf spring mount |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Nearside Electrical wiring insecure Chassis |1.9.2a| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush front most |2.4.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front cross member offside rear mount x3 |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting tipper body mount |nearest cab| |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting tipper body mount | nearest cab| |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced underside |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced b/post cracked |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis top of |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill areas within 30 cm of seat mounting marked in yellow chalk |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill areas within 30 cm of seat mounting marked in yellow chalk |5.2.6| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |shackle| forward bush |2.4.B.4| | 1 |
| Offside Rear Leaf spring has excessive side play at eye |shackle| forward bush |2.4.B.4| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill/step |2.4.A.3| | 1 |
| Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected ARCH |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS NEAR REAR SPRING HANGER |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS NEAR SPRING HANGER |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT OF FRONT SPRING SHACKLE |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower sill edge |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x2 |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch x2 |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill centre |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded springhanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded springhanger mounting |2.4.A.3| | 1 |
| Nearside Hand operated control valve damaged |3.2.1a| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner/outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction crack in windscreen (3.1 (a) (ii)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is inadequately repaired Quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Quarter panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Quarter panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Quarter panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Wing / Floor pan |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting Quarter panel |6.6.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail behind wheel |2.4.A.3| | 1 |
| Offside Outline marker lamp not working Middle lamp damaged (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch area (5.3.6 (a) (i)) | 1 |
| Body component damaged and likely to cause injury Rear step badly damaged (6.2.1 (a) (i)) | 1 |
| Windscreen damaged and affecting the drivers view of the road Cracked on nearside (3.2 (a) (ii)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel, at rear of wheel arch |6.1.B.2| | 1 |
| Nearside Rear Side repeater excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded around rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded around rear spring mounting |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg around engine mounting |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg around gearbox mounting |6.1.A.1| | 1 |
| Nearside Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded passengers door step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded drivers door step |5.2.6| | 1 |
| Nearside Rear Leaf spring main leaf fractured front eye broken off |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis section |3 places| |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded chassis section |3 places|
|2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill length of van |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill length of van |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section 2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Loading door cannot be secured in the closed position latch and handle bottom |6.4.1| | 1 |
| Hand operated control valve gate and/or locating mechanism excessively worn and cannot be held in the on position |3.2.1e| | 1 |
| Nearside Front Lower Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Outer Front Upper All position lamps not working |1.1.A.3b| | 1 |
| Nearside Outer Front Lower All position lamps not working |1.1.A.3b| | 1 |
| Offside Outer Front Lower All position lamps not working |1.1.A.3b| | 1 |
| Offside Outer Rear Lower All position lamps not working |1.1.A.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing (5.3.6 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing (5.3.6 (a) (ii)) | 1 |
| Nearside Front Body has a sharp edge caused by damage wing mirror |6.1.C.1| | 1 |
| Brake lever has abnormal movement of levers indicating maladjustment broken cable on test |3.5.1f| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill door step area |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch suspention mount |6.1.B.2| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner suspention area |6.1.B.2| | 1 |
| Centre Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger/inner sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings understep |6.1.B.2| | 1 |
| Offside Outer Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both Front steps |6.1.B.2| | 1 |
| Body has a projection caused by corrosion Rear tow mount areas |6.1.C.1| | 1 |
| Headlamp aim not tested o/s n/s |1.8.A.1c| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front leg |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at door |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion body door |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion body door |6.1.C.1| | 1 |
| Offside Rear Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch near top strut (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced foot step/sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Vehicle structure inadequately repaired such that structural rigidity is significantly reduced cab chassis (6.1.1 (d) (i)) | 1 |
| Offside Front Drivers seat moving inadvertently mountings corroded (6.2.5 (b) (ii)) | 1 |
| Offside Front Brake pipe inadequately supported pipe/flexi bracket corroded |3.6.B.1| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner arch areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by flexi hoses (5.3.6 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced rear crossmember front off rear axil (6.1.1 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced crossmember rear off rear axil (6.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded body |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill/body |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch by shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch on chassis (5.3.6 (a) (i)) | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings 5 places |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Outer chassis rail X2 |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Engine mount |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Outer inner wing |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Rear cross member |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch
|6.1.B.2| | 1 |
| Offside Front Direction indicator not working side repeater |1.4.A.2c| | 1 |
| Nearside Rear Upper Outline marker lamp lens seriously defective missing (4.2.1 (b)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill to foot well (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill to foot well (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS CROSS MEMBER (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS OUTRIGGER (5.3.6 (a) (i)) | 1 |
| Nearside Rear All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Rear Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 1 |
| Central Front Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill area |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded strut area |2.4.A.3| | 1 |
| Brake performance not tested due to excessive corrosion |3.7.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / sill (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb incorrctly fitted (4.1.2 (c)) | 1 |
| Nearside Rear Brake drum contaminated fluid leak possible cylinder leaking (1.1.14 (b)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inadequatle repaird (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp|s| adversely affected by the operation of another lamp Doesn`t function when other lights are on |4.3.3 |b|| | 1 |
| All direction indicators adversely affected by the operation of another lamp Doesn`t function with other lights on |4.4.3 |b|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp Operates as the stop lamp |4.4.3 |b|| | 1 |
| Rear Wheel bearing rough when rotated Both |5.1.3 |b| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded complete sill front to rear |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded complete sill front to rear |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded all around wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded all around wheel arch |2.4.A.3| | 1 |
| Rear Drive shaft uj which forms part of the suspension has a missing flange bolt |2.4.G.4c| | 1 |
| Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Offside Rear Suspension bellows damaged or deteriorated and function is seriously affected (5.3.5 (b) (ii)) | 1 |
| Front Body component corroded and likely to cause injury arches and sill both sides |6.2.1 |a| |i|| | 1 |
| Rear Body component corroded and likely to cause injury door |6.2.1 |a| |i|| | 1 |
| Electronic parking brake control inoperative |1.1.6 |d|| | 1 |
| Front Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded N/S Step within 30cm of seat mount |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Very rear cross member/rear panel on O/S |2.4.A.3| | 1 |
| Offside Rear Leaf spring damaged and permanently distorted Centre leaf |2.4.B.1a| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion near wheel arch |6.1.C.1| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill rail |6.1.A.1| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill rail |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill rail |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch to floor |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch to floor |6.1.A.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings reg plate panel |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member, |on pick up body| |6.1.B.2| | 1 |
| Offside Inner Front Lower Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member holed |2.4.A.3| | 1 |
| Rear Brake rod locking device insecure |3.5.1l| | 1 |
| Central Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 1 |
| Prop shaft bearing excessively worn bearing support us (6.1.7 (b) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect & LEVELING DEVICE NOT CHECKED! |4.1.2 |c|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill - Leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis - Rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect incorrect bulb fitment |1.8.A.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail within the |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint Bottom Ball Joint |2.4.G.2| | 1 |
| Hazard warning switch inoperative Not working on offside |4.4.2 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger forward of step within 30 CMS. of a mounting point as marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out rigger see above |5.3.6 |a| |i|| | 1 |
| Electrical wiring inadequately supported rear tow bar wiring |1.9.2a| | 1 |
| Electrical wiring damaged and bare wires exposed rear tow bar wiring |1.9.2c| | 1 |
| Offside Rear Upper Exhaust mounting missing |7.1.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded above both rear axle chassi box sections corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded near side rear box section near spring hanger corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floors and behind both rear wheels inner arches corroderd |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill corroderd |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded behind both front wheels inner arches corroderd and chassis |2.4.A.3| | 1 |
| Offside Window in an unacceptable condition side window broken |3.2 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing panel (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top section (6.1.1 (c) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury wing panel (6.2.1 (a) (i)) | 1 |
| Front Driver`s view to front impaired by crack screen cracked |6.9.1b| | 1 |
| Rear Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. corroded& holed |6.1.E.1| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill back front corner (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill backing (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill backing (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill backing (6.1.1 (c) (i)) | 1 |
| Nearside Passenger grab handle insecure side entrance |9.6 |b| |ii|| | 1 |
| Nearside Retractable step not operating correctly side step |9.7 |b|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill step corroded |7.1.1 |a| |i|| | 1 |
| Outer Rear Emergency exit sign missing |6.2.D.3| | 1 |
| Inner Rear Emergency exit sign missing |6.2.D.3| | 1 |
| Inner Emergency exit sign missing |6.2.D.3| | 1 |
| Nearside Entrance/exit step anti-slip provision damaged to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 1 |
| Offside Front Seat belt webbing significantly weakened passengers |7.1.2 |b| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced where marked |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear sub frame mounting (5.3.6 (a) (i)) | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded comp mount |3.3.A.2| | 1 |
| rear brake recording little or no effort |3.8.A.4a| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both n/s and o/s |1.1.A.3f| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor seat mounting |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front leaf spring mounting area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front leaf spring mounting area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area |6.1.B.2| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings front to mid section of inner sil |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by inner wheel arch of rear wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by rear spring ,rear mount |6.1.B.2| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sil [ complete |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area`s marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area`s - marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section area at leaf spring shackle mount - marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor area`s - marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint excessively worn marked in yellow |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component pin or bush excessively worn lower shock absorber bush - marked in yellow |5.3.4 |a| |i|| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour to bright |1.1.A.3e| | 1 |
| Front Headlamp switch faulty |1.7.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie (6.2.2 (d) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture front to rear |1.1.11 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 3 times holes |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting drop sill (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top part of chassis leg |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg bottom part and arch side |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom part of chassis leg and side part of under arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg were spring hanger mounts |2.4.A.3| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet also inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is fractured bottom of cab out rigger brace |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is fractured bottom of cab out rigger brace |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill and inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded underside area |2.4.A.3| | 1 |
| Offside Lower Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced underseal |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced underseal |6.1.1 |c| |i|| | 1 |
| Centre Front Fuel pipe insecure |7.2.1| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under step (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under step and sill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Body has a sharp edge caused by damage Mirror trim missing. |6.1.C.1| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail . |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Chassis rail. |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear of inner wheel arch |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp all lamps in this position affected |1.1.A.3f| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting both sides |6.1.6 |i| |i|| | 1 |
| Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front bush, bush missing |2.4.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill marked red |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill marked red |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Front Drag link end ball pin shank loose |2.2.B.1c| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills/outriggers corroded through behind rear wheels |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor corroded through |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroding through above rear axle |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing corroded through near to suspension leg |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded through behind wheel |6.1.B.2| | 1 |
| Wheel nut|s| missing one wheel nut from each wheel missing |4.2.A.1e| | 1 |
| Nearside Front Braking system leaking pipe |3.6.A.1| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded comp valve mounting |3.3.A.2| | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area is excessively corroded inner step/sill area |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner outer sill |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded rear chassi |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded both spring hangers |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded outer/inner sill |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| not working all lights in o/s/r cluster not working |1.1.A.3b| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion side of lamp unit |6.1.C.1| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis under brake servo (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger inside and outside (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger inside and outside (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering chassis where suspension mounts (6.1.1 (c) (ii)) | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis inside front wheel arch (6.1.1 (c) (ii)) | 1 |
| Offside Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger near spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Front Lower Body has a sharp edge caused by corrosion wings |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill end, sharp edge outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area, marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion footwell
|6.1.C.1| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion full sill
|6.1.C.1| | 1 |
| Offside Inner Body has a sharp edge caused by corrosion full sill |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sill at both ends of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sills at rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis 2 places |2.4.A.3| | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, front mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis leg to sill, rear leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg, underside (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on top of chassis leg - viewed from under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Body panel corroded and likely to cause injury nearside front wing |6.2.1 |a| |i|| | 1 |
| Body panel corroded and likely to cause injury offside front wing |6.2.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear chassis |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner arches |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner arch |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside step / within 30cm seat fixing |5.2.6| | 1 |
| Subframe mounting prescribed area is excessively corroded front offside |2.4.A.3| | 1 |
| Obligatory mirror seriously deteriorated, affecting the rear view nearside lower part of the mirror has a sharp edge |8.1.2a| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step holed |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/doorstep (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quater panel (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/doorstep (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassea quater panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassea / quater panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill/step. |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength three places (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing chassis leg |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill wheel arch |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floor |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floor |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by brake compensator valve |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded main chassis by engine mount |2.4.A.3| | 1 |
| Offside Rear Leaf spring cracked front eye snapped off |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting. (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear sections |6.1.1 |c| |i|| | 1 |
| Nearside Rear Macpherson strut worn and seriously weakened |2.4.G.2| | 1 |
| Offside Rear Macpherson strut worn and seriously weakened |2.4.G.2| | 1 |
| Towbar component defective Electric socket missing (6.1.6 (a)) | 1 |
| Rear fog lamp not working Turns reverse light on (4.5.1 (a) (ii)) | 1 |
| Nearside Front Braking system leaking front to rear brake pipes |3.6.A.1| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush Both D bushes |2.4.G.2| | 1 |
| Front Exhaust system insecure clamp loose (6.1.2 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg as marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Front Steering locking device ineffective track rod end lock nut lose |2.1.3 |d|| | 1 |
| Electronic stability control warning lamp indicates a fault |7.12 |e|| | 1 |
| Offside Towbar locking device insecure mounting bolt |6.6.3b| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Statutory seat belt missing seat belt buckle |5.1.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside inner sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bumper stop part (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s of rear [x] member |2.4.A.3| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement o/s wishbone rear mount bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s floor/shock mount various |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter area |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by damage mirror head cover missing |6.1.C.1| | 1 |
| Centre Brake pipe inappropriately repaired |3.6.A.3| | 1 |
| Offside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance lens broken |1.3.2d| | 1 |
| Offside Rear Wheel stud|s| missing 2 studs missing |4.2.A.1e| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings pouter sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch/engine mounting |2.4.A.3| | 1 |
| Nearside Rear Lower Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Prop shaft joint excessively worn centre bearing |6.1.7 |c| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced foot step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower panel |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower panel |6.2.2 |d| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength structure above rear axle both sides (5.3.6 (a) (i)) | 1 |
| Front Headlamp incorrect colour Both sides (4.1.4 (a)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength part of chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength part of chassis (5.3.6 (a) (i)) | 1 |
| Brake cable damaged centre broken (1.1.15 (a)) | 1 |
| Nearside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance lens broken |1.4.A.2e| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill plus step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion |7.1.1 |a| |i|| | 1 |
| Brake cable has wires broken and is significantly weakened failed under load |3.5.1b| | 1 |
| Statutory seat belt missing front middle |5.1.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chasis chalked up |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded around seat area too coverd in fibre glass |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front rear sill corroded and covered with fibre glass |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front rear sill corroded and covered with fibre glass |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear valance around tow bar covered with fibre glass |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear floor corroded and covered with fibre glass |6.1.B.2| | 1 |
| Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back of spring. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner seal/ front of spring. |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner seal/ back of spring. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/front of spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of spring |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/back of spring |5.3.6 |a| |i|| | 1 |
| Additional braking device has inadequate clearance between other components |3.6.I.2| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view WING
|8.1.2a| | 1 |
| Offside Front Upper Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Steering arm has relative movement at its fixings track rod arm |2.2.B.1h| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked |6.1.1 |c| |i|| | 1 |
| Exhaust system not adequately supported two center rubber mounts broken |7.1.1| | 1 |
| Nearside Front Statutory seat belt of the wrong type. |5.1.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to body |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near front spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near rear spring hanger |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill close to cab step |6.1.1 |c| |i|| | 1 |
| Nearside Front Front suspension has excessive movement at wishbone bearing bush at rear of wishbone |2.5.A.1c| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger next to rear spring hanger |6.1.B.2| | 1 |
| Fuel tank insecure front tank strap corroded through |7.2.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner valance |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step to inner sill |5.2.6| | 1 |
| Prop shaft bearing housing insecure Centre steady bearing |6.1.7 |f| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corrosion within 30cm of leaf spring front mount |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded N/S/F inner sill. |5.2.6| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release Drivers seat belt buckle. |5.2.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch. |2.4.A.3| | 1 |
| Nearside Rear Brake load sensing valve defective and function impaired Part missing. |3.6.E.3| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired Linkage missing. |3.6.E.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted door pillar/post |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired outer-inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing-under arch |2.4.A.3| | 1 |
| Rear Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring top mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near spring top mount (5.3.6 (a) (i)) | 1 |
| Central Front Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front Chassis Leg Under Bonnet Badly Corroded |6.1.B.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central area marked with yellow (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central area marked with yellow (6.1.1 (c) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system front to rear brake pipe (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Top of inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Top of inner wheel arch |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill in 2 places |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill at rear of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill at rear of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Crossmember in 3 places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill at front of wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch to floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Jacking point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor to inner wheel arch |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill in three areas |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Top of sill to step |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear outer sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both sides of rear crossmember |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both front inner wheel arches |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner sill to step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill near rearmost spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill near frontmost spring mounting (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of nearside front inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger to step (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper section of inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper section of inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage loose lower bolt (7.1.1 (b)) | 1 |
| Nearside Front Passengers seat insecure front bolt loose (6.2.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount/chassis |2.4.A.3| | 1 |
| Offside Front Lower Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Suspension component mounting prescribed area is excessively corroded along top of nearside outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inside nearside front wheel arch |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor corrosion at rear of driver`s and passenger seats |7.1.1 |a| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside inner and outer sill at rear end of cab (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch around strut area |6.1.B.2| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (Handbrake Cable Mounting Points - Middle Chassis, NSF Wishbone Mounting Bracket, Rear Fuel Tank Bracket Corroded - Non Existant) (6.2.2 (d) (i)) | 1 |
| Brake cable insecure failed under load(front cable) frayed and snapped (1.1.15 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected suspension top mount (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired subframe mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Brake pipe likely to become detached or damaged flexible hose (1.1.11 (d) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect Bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner arch in 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Nearside Front Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Nearside Inner Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Inner Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Nearside Rear Anti-roll bar damaged and seriously weakened drop link end |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar worn and seriously weakened drop link end |2.4.G.1| | 1 |
| Power steering component|s| leaking steering rack pipes |2.3.3b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Power steering component|s| leaking STEERING RACK |2.3.3b| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure DROP LINK |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure DROP LINK |2.4.G.1| | 1 |
| Offside Front Tie bar/rod fractured |2.4.G.1| | 1 |
| Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure |3.1.4b| | 1 |
| Offside Front Tie bar/rod locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat belt anchor point (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay chassis (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp|s| not working Both sides |4.3.1 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded UNDERBODY SILL |2.4.A.3| | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Front Lower Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded footwell to inner sill section |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour Lens broken |1.1.A.3e| | 1 |
| Rear Brake lever excessively corroded and seriously weakened |3.5.1e| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion outer step |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount in various places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount in various places |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded front spring mount in various places |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab cross member |5.2.6| | 1 |
| Nearside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill wheel arch and outrigger at rear spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger inner sill and inner wheelarch at rear spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at subframe mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded above chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded above chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger at front spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger at front spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at front spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock absorber| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock absorber and load sensor| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded upper chassis |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by outer sill |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s inner sill section under seat/step
o/s inner sill section under seat/step |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings area around n/r and o/r spring hangers |6.1.B.2| | 1 |
| Offside Front Upper Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to steel brake pipe |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near leaf springs |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near leaf springs |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner drop sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded drop sill and out rigger near rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to out rigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner drop sill front to rear |2.4.A.3| | 1 |
| Nearside Rear Body has a projection caused by corrosion outer wheel arch |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing wheelarch |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing strut mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Front suspension retaining device missing shocker bolt |2.5.A.4| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system across axle (1.1.11 (b) (ii)) | 1 |
| Offside Ball joint damaged and unserviceable |2.2.C.1d| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing corroded Above chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded upper & lower |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring front mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring front mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle mount area corroded & holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mount area corroded & holed |5.3.6 |a| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill corroded & holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower chassis face (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of rear wheel (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step to inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Nearside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering bumpstop |6.1.A.1| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering bumpstop |6.1.A.1| | 1 |
| Nearside Rear Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Rear Brake cable has restricted free movement x2 rubbing against leaf springs |3.5.1k| | 1 |
| Offside Front Lower Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance SHOWING WHITE LIGHT |1.1.A.3d| | 1 |
| Offside Front Body insecure and dangerous to other road users BUMPER |6.1.B.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOX SECTION |6.1.B.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Detritus on dash |8.3.1e| | 1 |
| Prop shaft bearing excessively worn Front prop mount |6.1.7 |b| |i|| | 1 |
| Fuel cap/sealing device missing Temp cap fitted (6.1.3 (b) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis crossmember (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd to rear chassis crossmember (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Top of chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced Behind cab (6.1.1 (b) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Above front subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Below suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Below suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded above chassis. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded door step. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor. |2.4.A.3| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view both |3.3 |b| |ii|| | 1 |
| Power steering ram leaking |2.1.5 |a|| | 1 |
| Rear position lamp|s| not working both rear top marker lights and o/s top marker light is number plate light aswell |1.1.A.3b| | 1 |
| Anti-roll bar linkage insecure both rear bottom linkages loose |2.4.G.1| | 1 |
| Offside Brake disc significantly and obviously worn and nearside front |1.1.14 |a| |i|| | 1 |
| Offside Suspension arm ball joint excessively worn and nearside front lower |5.3.4 |a| |i|| | 1 |
| Offside Anti-roll bar pin or bush excessively worn and nearside rear |5.3.4 |a| |i|| | 1 |
| Offside Anti-roll bar insecurely attached and nearside rear |5.3.3 |a| |i|| | 1 |
| Offside Shock absorbers damaged to the extent that it does not function and nearside rear |5.3.2 |b|| | 1 |
| Offside Anti-roll bar damaged and seriously weakened and nearside rear (5.3.3 (b) (i)) | 1 |
| Front position lamp|s| not working both cab roof lights |1.1.A.3b| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint both rear link ball joints loose |2.4.G.2| | 1 |
| Offside Front Front position lamp|s| not working cab roof light n/w |1.1.A.3b| | 1 |
| Offside Rear Rear position lamp|s| not working top marker light/number plate light n/w |1.1.A.3b| | 1 |
| Parking brake lever has no reserve travel hand brake lever high |3.1.6b| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint both rear ball joints loose and one nut missing |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom rear corner of cab corroding through |6.1.B.2| | 1 |
| Offside Front Upper Position lamp not working cab (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Lower passenger door catch insecure n s r door catch not catching |6.2.B.2| | 1 |
| Offside Front Outer Body has a sharp edge caused by corrosion o s f wing has a hole in just above the bumper corner |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n s f step corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o s f step corroded |6.1.B.2| | 1 |
| Fuel tank insecure fuel tank strap corroded |7.2.1| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength bottom of chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill / leafspring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength shock mount / floor (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength top of chassis leg under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer body sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shock top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired Near engine mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Fuel cap/sealing device missing |7.2.4a| | 1 |
| Spare wheel carrier insecure corrosion |6.4.2| | 1 |
| Outer Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front Subframe mounting prescribed area is excessively corroded Both chassis rails to rear of subframe |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring anchor Inner sill and inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring shackle inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring anchor inner sill |2.4.A.3| | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced step (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced step (6.1.1 (a) (i)) | 1 |
| Nearside Front Windscreen wiper control missing |8.2.1a| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced over rear axle |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area |6.1.1 |c| |i|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded whole rear end of vechicle is excessively corroded |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering front wheel arches excessively coroded |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering whole vechicle excessively corroded |6.1.A.1| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger in front wheel arch (6.1.1 (c) (i)) | 1 |
| Fuel hose leaking injector leak off pipes (6.1.3 (b) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre row |7.1.1 |a| |i|| | 1 |
| Power steering pipe/hose leaking steering rack area |2.1.5 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount inner sill and rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount inner sill and rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Front Leaf spring main leaf fractured |5.3.1 |b| |ii|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ****step*** |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Offside Front Tie bar/rod has excessive play in a ball joint track end |2.4.G.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassia |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/ step |6.1.B.2| | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Offside Rear Brake actuating linkage mounting prescribed area is fractured |3.3.A.2| | 1 |
| Offside Rear Road wheel fitment excessively worn between the wheel and hub spigot mounting. |4.2.B.5| | 1 |
| Nearside Front Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis engine bay area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis engine bay area (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis inner arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis inner arch area (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking injector no 2 (6.1.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension arm insecurely attached to outer ball joint (5.3.3 (a) (i)) | 1 |
| Nearside Towbar attachment defective bolt snapped (6.1.6 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor behind seat |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door inner sill |5.2.6| | 1 |
| Nearside Steering system has excessive free play detected at the steering wheel |steering rack fitted| track rod |2.2.A.1b| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step / sill / chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step / sill |6.1.1 |c| |i|| | 1 |
| Emissions not tested smoky |8.2.2.2 |e|| | 1 |
| Front Suspension arm pin or bush excessively worn both sides |5.3.4 |a| |i|| | 1 |
| Offside Rear Leaf spring cracked broken rear front |2.4.B.1a| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded offside and nearside rear |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded MAIN CHASISS INNER WING |2.4.A.3| | 1 |
| Front Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Steering column shaft locking device missing |2.1.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear crossmember to inner wing. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch to floor panel. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch to sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill to wheel arch/wheel arch |5.3.6 |a| |i|| | 1 |
| Other passenger door catch missing Nearside rear upper catch missing |6.2.3 |c| |ii|| | 1 |
| Central Prop shaft bearing excessively worn bush (6.1.7 (b) (i)) | 1 |
| Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Central Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Front Lower Body panel corroded and likely to cause injury step area (6.2.1 (a) (i)) | 1 |
| Nearside Front Inner Body panel corroded and likely to cause injury step area (6.2.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount area inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member hanb brake mount area (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab inner step area (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis as weakened also cracked in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded were inner arch joins floor |2.4.A.3| | 1 |
| Emissions not tested due to exhaust condition |8.2.2.2 |e|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member and chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member under sill and outrigger by spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill and outrigger by spring shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired some repairs around vehicle have not been completed to a satisfactory standard |5.3.6 |a| |i|| | 1 |
| Centre Brake clevis joint has restricted free movement |3.5.1k| | 1 |
| Oil leaking excessively from transmission diff input shaft oil seal (8.4.1 (a) (i)) | 1 |
| Nearside Front Lower Body component corroded and likely to cause injury fender (6.2.1 (a) (i)) | 1 |
| Nearside Rear Lower Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring linkage pin excessively loose in its bracket front |2.4.B.3a| | 1 |
| Offside Front Body has a sharp edge caused by damage step bar |6.1.C.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded x member |3.1.9| | 1 |
| Fuel tank insecure x member corroded |7.2.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded X2 |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of leaf spring area |2.4.A.3| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view drivers door mirror |3.3 |b| |ii|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill area |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill area |6.2.2 |d| |ii|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill area |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chasis |6.2.2 |d| |i|| | 1 |
| Track rod end ball joint has excessive play both fronts |2.1.3 |b| |i|| | 1 |
| Supplementary Restraint System warning lamp indicates a fault airbag light on |5.4.2| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing corroded near strut mount piont |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis corroded near subframe mounting piont |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front mount riggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch behind bumper |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mount riggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front mount riggers |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing frayed |5.2.2a| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Nearside Front Road wheel fixing missing Wheel nut (5.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release last seat |5.2.5a| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill in several places |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch to floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4 panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded spring hanger |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded spring hanger |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of rear spring out rigger |2.4.A.3| | 1 |
| Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/ step (5.3.6 (a) (i)) | 1 |
| Front Sub-frame corroded and seriously weakened Engine (5.3.3 (b) (i)) | 1 |
| Offside Rear Brake pipe likely to become detached or damaged brake pipe chaffing on u-bolt |1.1.11 |d| |ii|| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Power steering pipe/hose excessively corroded from rack |2.1.5 |g| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded quarter pannel |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Front undersill / door step area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Undersill / door step area |5.2.6| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded Inner wing /arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill & under sill areas |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is inadequately repaired Nearside & offside |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Undersill areas |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Nearside & offside chassis |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Nearside & offside shackle mounting areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis on inner wing |2.4.A.3| | 1 |
| All outline marker lamps missing (4.2.1 (a) (ii)) | 1 |
| Nearside Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre and rear step area |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Rear Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 1 |
| Offside Outer Front Steering retaining device missing |2.2.C.1g| | 1 |
| Nearside Front Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Lower Steering column retaining device insecure |2.1.6| | 1 |
| front brake recording little or no effort N/S |3.7.B.5a| | 1 |
| front brake binding N/S |3.7.B.1| | 1 |
| Seat belt insecurely fixed to the vehicles structure N/S FRONT |5.2.1a| | 1 |
| Seat belt locking mechanism does not secure or release N/S FRONT |5.2.5a| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S FRONT INNER ARCH |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S REAR INNER ARCH |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S REAR INNER ARCH |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S REAR OUT RIGGER |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S REAR OUTRIGGER |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill panel |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill panel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded closing sill |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded chassis 2 places |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor/ seat mounting |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded closing panel |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 1 |
| Offside Front Brake pipe leaking burst when carrying out brake test |3.6.A.1| | 1 |
| Body has a sharp edge caused by corrosion nearside tipper side |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion offside tipper side |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion rear tipper |6.1.C.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing in two places (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near rear shakel |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings valance |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings from front to rear |6.1.B.2| | 1 |
| Nearside Front Obligatory mirror seriously deteriorated, affecting the rear view wing mirror cracked
|8.1.2a| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under wheelarch |2.4.A.3| | 1 |
| Bonnet seriously at risk of opening inadvertently poor security bonnet catches fitted. (3.1 (b) (ii)) | 1 |
| Offside Front Body component damaged and likely to cause injury bonnet catch broken/sharp (6.2.1 (a) (i)) | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values first test 6.37 (8.2.2.2 (f)) | 1 |
| Prop shaft joint excessively worn front centre bearing on prop (6.1.7 (c) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill too step joint |5.2.6| | 1 |
| Nearside Towbar mounting obviously of an inappropriate size |6.6.2| | 1 |
| Offside Towbar mounting obviously of an inappropriate size |6.6.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill and step corroded. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step corroded. |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch corroded. |6.1.B.2| | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seal |6.2.2 |d| |i|| | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seal |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings gearbox mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top engine mounting under bonnet |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring mount |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear leaf spring mounts |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both front inner cills |5.2.6| | 1 |
| Body has excessive displacement which may lead to loss of vehicle control both rear bump stops |6.1.B.1a| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/step x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis plate not welded all way round/continus |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear |leaf spring| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of leaf spring mounting |2.4.A.3| | 1 |
| Rear Leaf spring slipper insecure |2.4.B.5| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded x member |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded footwell |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded footwell |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area to sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength close to back shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis close to shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced several places, floor/inner sill/winner wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body area (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill to body panel area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body chassis area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body to rear inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body panel backing area (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill backing area (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar b post [ fractured] (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to rear wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing panel (6.2.1 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wheel arch area (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury wheel arch area (6.2.1 (a) (i)) | 1 |
| Nearside Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing marked with white chalk (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing marked with white chalk (6.2.2 (d) (i)) | 1 |
| Fuel cap/sealing device missing cap missing (6.1.3 (b) (i)) | 1 |
| Front Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 1 |
| Nearside Inner Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Lower Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Power steering fluid level below minimum topped up |2.3.1| | 1 |
| Nearside Front Front position lamp|s| not working dip beam |1.1.A.3b| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center crossmember |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside front outer sill by passenger door |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside centre outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner chassi leg |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear outer wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear inner wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear inner wheel arch |6.1.B.2| | 1 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended BOTH IN OP AND DAMAGED |1.9.4| | 1 |
| Electrical wiring damaged, likely to cause a short TOWBAR WIRING |1.9.2b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH INNER WINGS |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL TO OUTER SILL AND STEP AREA |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR FLOORS TO ARCHES NEAR SHOCK ABSORBER MOUNTS |6.1.B.2| | 1 |
| Nearside Front brake caliper securing device loose CALIPER BOLT |3.5.1j| | 1 |
| Exhaust system not adequately supported LOOSE AT FRONT PIPE TO MIDDLE JOINT |7.1.1| | 1 |
| Centre Front Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Nearside Rear Leaf spring shackle pin locking device insecurely fitted |2.4.B.3b| | 1 |
| Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Rear Body has a projection caused by corrosion both wheel arches |6.1.C.1| | 1 |
| Offside Front Upper Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Outer Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Inner Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Central Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Fuel tank insecure front tank mounting strap missing |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill to chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill to chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch to chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded drop sill and chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and drop sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front drop sill and outer sill |2.4.A.3| | 1 |
| Offside Steering locking device missing |2.2.C.1g| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement Front d bushes, rear d bushes |2.4.G.2| | 1 |
| Nearside Front Driver`s door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside doorstep |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases front box holed |6.1.2 |a|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn nearside and offside bushes |5.3.4 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing |3.6.C.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill excessivly corrodded |5.2.6| | 1 |
| Front position lamp|s| incorrect colour both front lamps are blue |1.1.A.3e| | 1 |
| Offside Front All position lamps not working top marker light |1.1.A.3b| | 1 |
| Body has a sharp edge caused by corrosion both sides of trailer bed has various holes |6.1.C.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing and coil spring mounting |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion body holed in various places |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion body holed in various places |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on top of chassis rail under bonnet |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on top of chassis rail under bonnet |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch mounting corroded and insecure catching wheel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch insecure and catching wheel |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill end |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out riger/inner outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out riger/sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f sill distorted and holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r outer sill holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner sill holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f/ door step mounting area holed/top/bottom (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r/ inner sill holed and inadequately repaired- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r/ inner sill holed and inadequatly repaired- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r rear inner sill holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r rear chassie leg to rigger holed behind wheel arch (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r rear inner sill holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear panel holed multiple places (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r near leaf spring mounting area holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r floor area to inner arch holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside outer sill holed and inadequately repaired- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f under door step mounting area holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner sill holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner wheel arch holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner wheel arch holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r/ inner arch holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f/ inner wheel arch multiple places (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r/ inner wheel arch multiple places holed (6.1.1 (c) (i)) | 1 |
| Suspension arm pin or bush excessively worn n/s/f/ rear wishbone bush (5.3.4 (a) (i)) | 1 |
| Offside Rear position lamp|s| incorrect colour lamp broke |1.1.A.3e| | 1 |
| Body has a sharp edge caused by corrosion side panels |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured eye |2.4.B.1a| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/ door step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/ door step (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelarch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelarch (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around park bake cable mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step area |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at leaf spring front mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded out rigger at arch area
|2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting, both front and rear ends (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting, both front and rear ends (5.3.6 (a) (i)) | 1 |
| Offside Seat belt flexible stalk cable has broken strands |5.2.4b| | 1 |
| Offside Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury rear arch |6.2.1 |a| |i|| | 1 |
| Offside Front Lower Steering linkage ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
| Brake load sensing valve missing where fitted as standard fitted but bypassed (1.1.17 (d)) | 1 |
| Offside Rear Lower Anti-roll bar linkage cracked |2.4.G.1| | 1 |
| Offside Rear Lower Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
| Fuel tank insecure front support strap excessively corroded (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of shackle pin bush (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength n/s rear |5.3.6 |a| |i|| | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s front |5.3.6 |a| |i|| | 1 |
| Rear Position lamp light intensity significantly reduced both sides (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Outer Outline marker lamp not working |4.2.1 |a|| | 1 |
| Central Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 1 |
| Central Fuel tank insecure Tank strap broken (6.1.3 (a) (i)) | 1 |
| Front Brake disc significantly and obviously worn Both front discs- inner faces (1.1.14 (a) (i)) | 1 |
| Nearside Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Rear Leaf spring main leaf fractured broken at front eye (5.3.1 (b) (ii)) | 1 |
| Nearside Rear Brake disc contaminated hub seal leaking (1.1.14 (b)) | 1 |
| Battery insecure (1.9.1) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step /wing inside van (6.1.B.2) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch above wheel (2.4.A.3) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member x 3 (6.1.B.2) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger by step (6.1.B.2) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Front Body has a projection caused by corrosion (6.1.C.1) | 1 |
| Offside Body has a projection caused by corrosion (6.1.C.1) | 1 |
| Offside Outer Front Body has a projection caused by corrosion (6.1.C.1) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2) | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail (6.1.B.2) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail (6.1.B.2) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill and step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger, shackle end |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger shackle end |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inside corner |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area is inadequately repaired inner step to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill to wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill to wheel arch |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker mount point |6.1.B.2| | 1 |
| Anti-roll bar linkage worn and seriously weakened both rear links |2.4.G.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner/outer chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner/outer chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sills |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger/inner wheelarch |5.3.6 |a| |i|| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings HOLE IN SILL |6.1.B.2| | 1 |
| Offside Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings HOLE IN SILL |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings HOLE IN SILL |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings HOLE IN SILL |6.1.B.2| | 1 |
| passenger door catch missing sld lower roller |6.2.B.2| | 1 |
| Offside Front Driver`s seat with a defective structure |6.2.5 |a| |i|| | 1 |
| Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle Handle and lock damaged |6.2.B.1c| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step x3 |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x3 |6.1.B.2| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by upper shock absorber strut mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by rear leaf spring |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sill |6.1.B.2| | 1 |
| Fuel tank insecure strap snapped and tank resting on crossmember |7.2.1| | 1 |
| Nearside Front Sub-frame synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Sub-frame synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine average 4.75 |7.4.B.3b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded rear corner of cab |5.2.6| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear out riggers |6.1.B.2| | 1 |
| Offside Front Lower Statutory seat belt missing |5.1.1| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush split |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing bottom fixing loose |2.4.G.2| | 1 |
| Nearside Front Track rod end has had excessive heat applied |2.2.C.1e| | 1 |
| Rear Electrical wiring deteriorated, likely to become detached |1.9.2b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 1/4 panel & inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner 1/4 sill & inner wing & outrigger & crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger & crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner & outer sill |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate value-0.75 Test value-3.32 (8.2.2.2 (a)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion closeing panel |6.1.C.1| | 1 |
| Front coil spring corroded so that its cross sectional area is reduced and seriously weakened two |2.4.C.1b| | 1 |
| Nearside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Quarter |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Qaurter |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill at front of spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill at rear of spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded lower mounting |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of rear axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger behind rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger behind rear axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor panel to chassis under rear wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor panel to chassis under rear wheel arch |2.4.A.3| | 1 |
| Offside Outer Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded springhanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded springhanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outriggers x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer/inner sill |2.4.A.3| | 1 |
| Offside Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Position lamp lens seriously defective when indicator applied |4.2.1 |b|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values plate value 1.22 READING 7.22 (8.2.2.2 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring and shock absorber areas (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring and shock absorber area (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Anti-roll bar linkage ball joint excessively worn securing bolt not tightened (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind screen wash bottle (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mount outrigger under drivers seat (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting drivers step / sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner flitch ,also repair plate fitted not continuously welded around circumference (5.3.6 (a) (i)) | 1 |
| Oil leaking excessively from engine filter area |8.4.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front and rear of spring |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is inadequately repaired poor welding needs to be seem welded with no holes or gaps in |5.3.6 |a| |i|| | 1 |
| Front Suspension arm pin or bush excessively worn both front |5.3.4 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer sill |5.3.6 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill inner and outer |5.3.6 |a| |ii|| | 1 |
| Nearside Outer Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured outrigger |5.2.6| | 1 |
| Power steering inoperative |2.3.1a| | 1 |
| Power steering pump insecure |2.3.4| | 1 |
| Rear Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 1 |
| Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Inner Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner upper sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner upper sill |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint loose |2.4.G.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both d bushes worn |2.4.G.2| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush both excesive play |2.4.G.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Driver`s seat insecure broken frame |6.2.A.1| | 1 |
| Exhaust system insecure Rear bracket |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Lower arm rear bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill needs repair |6.1.B.2| | 1 |
| Offside Front Upper Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f/ under door step area holed- (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner sill mutlple places holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r chasie to sill holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r sill to arch holed (6.1.1 (c) (i)) | 1 |
| Suspension arm ball joint excessively worn n/s/f/ (5.3.4 (a) (i)) | 1 |
| Nearside Rear Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting areas (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting areas (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor/ step areas (7.1.1 (a) (i)) | 1 |
| Nearside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings Behind cab |6.1.B.2| | 1 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings Behind cab |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Steering linkage ball joint has excessive play tie bar (2.1.3 (b) (i)) | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play tie bar (2.1.3 (b) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering Chassis rail in engine bay. |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail in engine bay. |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail bump stop area. |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail bump stop area. |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail in front of road wheel. |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail in front of road wheel. |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wheel arch. |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wheel arch. |6.1.A.1| | 1 |
| Front suspension has excessive play in a upper suspension ball joint nearside and offside |2.5.B.1a| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre chassis section |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill rear spring mount |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member holed |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member holed |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion lower door |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg (5.3.6 (a) (ii)) | 1 |
| Rear Seat belt missing Middle (7.1.2 (a)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front to rear |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal front to rear |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill front to rear |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill front to rear |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quater |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quater |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail near shock absorber |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced complete sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced qautre |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quatre |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced complete sill |6.1.1 |c| |i|| | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arches both sides |6.1.1 |c| |i|| | 1 |
| Emissions not tested white smoke |8.2.2.2 |e|| | 1 |
| Offside Brake pipe inappropriately repaired |3.6.A.3| | 1 |
| Front Brake warning device not fitted |3.3.E.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded outrigger by step |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger by step |2.4.A.3| | 1 |
| Nearside Rear Brake valve locking device insecure |3.6.A.2d| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded crossmember back of cab |2.4.A.3| | 1 |
| Offside Front Body component damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury above rear lamp |6.2.1 |a| |i|| | 1 |
| Battery insecure secondary battery at the rear of the seats is not clamped down |1.9.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength brake servo inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis shock mount area (5.3.6 (a) (i)) | 1 |
| Stop lamp adversely affected by the operation of another lamp side light |1.2.1f| | 1 |
| Offside Rear Braking system leaking across axle |3.6.A.1| | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail inner |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail outer |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail inner |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Centre Brake rod excessively worn and seriously weakened |3.5.1e| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded base of B pillar |5.2.6| | 1 |
| Central Rear Prop shaft bearing excessively worn prop centre support bearing (6.1.7 (b) (i)) | 1 |
| Nearside Rear Outline marker lamp does not illuminate simultaneously with the position lamps not fitted (4.2.2 (a)) | 1 |
| Offside Rear Outline marker lamp does not illuminate simultaneously with the position lamps not fitted (4.2.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis /inner wing marked (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under bonnet marked (6.1.1 (c) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis plate on both sides of chassis marked (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced total 8 places all marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury headlamp cover/lense broken (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rigger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mount area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas corroded but not within 30cm of anything (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing 30cm of suspension mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill front end of rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL FRONT END OF REAR SPRING |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER/OUTER SILL FRONT END OF REAR SPRING |2.4.A.3| | 1 |
| Central Lower Exhaust has a major leak of exhaust gases front pipe holed (6.1.2 (a)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Headlamp aim not tested Both not checked because lamps not working (4.1.2 (b)) | 1 |
| Front suspension locking device ineffective |2.5.A.4| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Understep (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Understep (7.1.1 (a) (i)) | 1 |
| Offside Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Upper section of box chassis 3x places marked yellow chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Upper section of box chassis 7x places marked yellow chalk (6.1.1 (c) (i)) | 1 |
| Emissions not tested excess black smoke |7.3.A.1| | 1 |
| Nearside rear brake recording little or no effort service |3.7.B.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired under arch/inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch/inner wing x 3 |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under arch/inner wing |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor/step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under sill back |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outrigger by under step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member as marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member as marked (5.3.6 (a) (i)) | 1 |
| Offside Outer Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Offside Front Drivers seat insecure bolt missing (6.2.5 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/under step |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step/sill back |7.1.1 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar worn and seriously weakened drop link bolt hole. |2.4.G.1| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member is corroded and holed in 3 places |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases EGR pipe split |7.1.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member near O/S/R spring hanger |6.1.B.2| | 1 |
| Emissions not tested due to oil leak |7.3.A.1| | 1 |
| Exhaust has a major leak of exhaust gases broken off going into exhaust box |7.1.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush back |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch in 2 places |6.1.B.2| | 1 |
| Front Inner Anti-roll bar rubber mounting deteriorated resulting in excessive movement D BUSHES, BOTH |2.4.G.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CENTRE SILL |6.1.B.2| | 1 |
| Offside Front Passengers seat insecure Passenger seat has excessive movement in mounting/swivel (6.2.6 (a) (ii)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` Sat Nav bracket |8.3.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor inner wheel arch area |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / outer sill |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by damage mirror housing |6.1.C.1| | 1 |
| Other passenger door cannot be opened from outside the vehicle rear door handle broke (6.2.3 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded CROSS MEMBER BEHIND CAB,ABOVE FUEL TANK AND EXHAUST |3.1.9| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded FLOOR AROUND DRIVERS SEAT |5.2.6| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings by fuel tank filler neck |6.1.B.2| | 1 |
| Nearside Front Anti-lock braking system component missing ABS sensor and ring |3.4.2| | 1 |
| Offside Front Anti-lock braking system component missing ABS sensor and ring |3.4.2| | 1 |
| Nearside Rear Lower Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Nearside Rear Seat belt flexible stalk damaged |7.1.2 |b| |i|| | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded and weak, seats moving on mounts when checked |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt flexible stalk damaged stalk does not buckle securely every time |7.1.2 |b| |i|| | 1 |
| Prop shaft bearing excessively worn secondary rear bearing |6.1.7 |b| |i|| | 1 |
| Fuel pipe leaking tank breather hose |6.1.3 |b| |i|| | 1 |
| Exhaust system insecure also incomplete |6.1.2 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed within 30cm of suspension mount X3 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed within 30cm of shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed within 30cm of suspension mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed right across, within 30cm of suspension and floor weak |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed right across, within 30cm of suspension and floor weak |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis holed also with 30cm of subframe |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step holed |6.1.1 |c| |i|| | 1 |
| Nearside Outer Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush d bush`s |2.4.G.2| | 1 |
| Offside Front Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner door sill |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner door sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis |6.1.1 |c| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner & outer sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill step area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch area by door shuts |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis back panel corner |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill seatbelt area |5.2.6| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Door Sills |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Door Sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear outer sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings off side & nearside rear upper panel complete |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outter sill
|5.2.6| | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside rear inner side panel |plate not big enough to cover excess corrosion| - swing shackle |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside front inner arch - sub frame |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front inner arch - sub frame |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front inner arch - sub frame |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outer - fixed shackle |2.4.A.3| | 1 |
| Power steering component insecure Bottle insecure. |2.1.5 |d| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Hand brake mounting. |1.1.21 |e| |i|| | 1 |
| Nearside Front Brake prescribed area is excessively corroded Brake hose mounting insecure. |1.1.21 |e| |i|| | 1 |
| Fuel tank insecure fuel tank straps corroded |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Centre crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Centre crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Antiroll bar link mounting/top of chassis rail |2.4.A.3| | 1 |
| Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sills |7.1.1 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced undersills |7.1.1 |a| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake hose excessively damaged both flexi hoses (1.1.12 (b) (ii)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills rotten in two places marked with yellow chalk |6.1.B.2| | 1 |
| Offside Outer Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Upper Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Nearside Rear fog lamp lens defective such that emitted light is adversely affected showing white light (4.5.1 (b) (ii)) | 1 |
| Offside Steering column shaft locking device insecure |2.1.5| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch sharp edges (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 1 |
| Nearside Front Upper Obligatory mirror missing mirror glass |8.1.1| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced hole due to excess corrosion off side front step |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced hole due to excess corrosion near side front step within 30cm seat belt mounting
Also seat frame where seat belt is bolted
is excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner supportive panelling hole due to excess corrosion within 30cm suspension mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central /rear cross member hole due to excess corrosion within 30cm spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole due to excess corrosion on rear crossmember within 30cm of spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension rod pin or bush excessively worn drop link (5.3.4 (a) (i)) | 1 |
| Offside Front Upper Outline marker lamp not working on roof not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working side not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill and door step |5.2.6| | 1 |
| Front Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills
|5.2.6| | 1 |
| Offside Rear Entrance/exit door deteriorated and likely to cause injury |6.2.C.1b| | 1 |
| Nearside Rear Entrance/exit door deteriorated and likely to cause injury |6.2.C.1b| | 1 |
| Nearside Front Entrance/exit step anti-slip provision insecure sliding door, step, rubber missing and one part insecure |6.1.E.1| | 1 |
| Offside Rear window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| opening door |6.9.7b| | 1 |
| Nearside Rear window|s| not made of safety glass, or from safety glazing |on or after 1st June 1978| very rear window nearside |6.9.7b| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn centre prop shaft bearing |2.4.G.4d| | 1 |
| Headlamp not working on main beam Both (4.1.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Step/Sill (7.1.1 (a) (i)) | 1 |
| Service brake has no recorded effort at a wheel Both Rear (1.2.1 (a) (ii)) | 1 |
| Parking brake inoperative on one side Both Sides Inop. (1.4.1 (a)) | 1 |
| Road wheel more than one fixing missing all wheels (5.2.1 (a) (ii)) | 1 |
| Nearside Power steering pump insecure |2.3.6| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Fuel system component leaking rear of engine fuel pump or pipes leaking |7.2.3| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step & inner sill |6.1.B.2| | 1 |
| Offside Front Outer Body has a projection caused by corrosion Step & inner |6.1.C.1| | 1 |
| Front Exhaust has a major leak of exhaust gases Exhaust down pipe leaking & blowing |7.1.2| | 1 |
| Centre Lower Brake linkage excessively corroded and seriously weakened |3.5.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front of rear spring |2.4.A.3| | 1 |
| Exhaust emits dense blue smoke at idle |8.2.1.2 |f|| | 1 |
| Prop shaft flexible coupling excessively deteriorated Rear prop shaft support u/s (6.1.7 (d) (i)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users Vehicle has an excessive water leak (8.4.1 (a) (i)) | 1 |
| Horn not working wiring loose (7.7 (a)) | 1 |
| Nearside Brake performance not tested |3.7.A.1| | 1 |
| Offside Brake performance not tested |3.7.A.1| | 1 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance lens sharp edge |1.1.A.3d| | 1 |
| Nearside Windscreen in an unacceptable condition |3.2 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BEFORE SPRING AND AFTER (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BEFORE AND AFTER SPRING (5.3.6 (a) (i)) | 1 |
| Rear Stop lamp not working Both sides. |1.2.1b| | 1 |
| Nearside Rear Lower Body has a sharp edge caused by corrosion Outer sill and wheel arch. |6.1.C.1| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush. |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush. |2.4.G.2| | 1 |
| Nearside Front Position lamp not working Renewed bulb (4.2.1 (a) (ii)) | 1 |
| Rear Stop lamp(s) all not working Switch adjust on test (4.3.1 (a) (iii)) | 1 |
| Nearside Rear Upper Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch within 30cm of shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under the bonnet on chassis rail |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under wing |6.1.A.1| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded on chassis within 30 cm of brake load valve |3.3.A.2| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush n/s o/s D bushes |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded within 30 cm |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded on inner sill within 30 cm |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded on inner sill within 30 cm |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded on outer sill within 30 cm |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on side door step within 30 cm |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on outer sill within 30 cm |5.2.6| | 1 |
| Offside Rear Sub-frame worn and seriously weakened |2.4.G.1| | 1 |
| Centre Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Upper Front position lamp|s| not working ON ROOF OF CAB |1.1.A.3b| | 1 |
| Rear Braking system leaking REAR AXLE BRAKE LIMITING VALVE IS LEAKING |3.6.A.1| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D-Bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D-Bush (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside front inner step within 30cm of seat rear mount (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside front inner arch within 30cm of seat front mount (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside front inner step area within 30cm of seat rear mount (7.1.1 (a) (i)) | 1 |
| Front Headlamp levelling device inoperative |1.7.2| | 1 |
| Nearside All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded CHASSIS, IN WHEEL WELL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL AND WHEEL WELL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AROUND FORWARD SHACKLE MOUNT AND REAR SHACKLE MOUNT |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded SIDE OF CHASSIS RAIL NEAR TO LIMIT VALVE MOUNT |3.3.A.2| | 1 |
| Exhaust system insecure outer skin (6.1.2 (a)) | 1 |
| Rear Body has an unsafe modification tipper body requires complete refurbishment or replacing completely corroded through. (6.2.1 (d) (i)) | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play TIE BAR (2.1.3 (b) (i)) | 1 |
| Nearside Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Leaf spring fractured front anchor |5.3.1 |b| |i|| | 1 |
| Rear Oil leaking continuously from transmission posing a serious risk to road safety differential |8.4.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x3 |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 |6.1.1 |c| |i|| | 1 |
| Power steering pump insecure resavoiure insecure |2.3.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis at rear of sub fraime |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill next to spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted next to spring mouny |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted inner lower quater panel & rear cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner lower quarter panel |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened inner and outer |5.3.3 |b| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near door step and under wheel arch |6.1.B.2| | 1 |
| Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. and seat has play |6.2.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near door step and under wheel arch |6.1.B.2| | 1 |
| Front Headlamp aim beam image obviously incorrect both side |1.8.A.1b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under the hood and under the wheel arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near head lamp and under wheel arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker and leaf spring |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front door step |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front inner wing in 2 places |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis x meber in front of spare wheel (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Front Sub-frame attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Hazard warning switch faulty not operating all O/S lamps |1.4.B.1d| | 1 |
| Offside Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Tie bar/rod locating pin insecure |2.4.G.3a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Front Body component corroded and likely to cause injury wings sharpe edges (6.2.1 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment performance 14% minimum required 16% or lockout (1.1.6 (c)) | 1 |
| Prop shaft securing bolt loose centre joint wedge missing bolt loose (6.1.7 (a) (i)) | 1 |
| Emissions not tested oil level to high / oil and charging lights on (8.2.2.2 (e)) | 1 |
| Rear Shock absorbers has a serious fluid leak both no fluid left in shocks |5.3.2 |b|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced prop shaft mount |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under inner sill |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under inner sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring hanger shackle |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outter sill |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering across rear |6.1.A.1| | 1 |
| All position lamps not working n/s o/s |1.1.A.3b| | 1 |
| Offside Front Brake pipe likely to become detached or damaged pipe busted (1.1.11 (d) (ii)) | 1 |
| Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis |top| |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis/body |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis/body |2.4.A.3| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member holed |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount inner and outer sill and arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount inner and outer sill and arch |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger holed and corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches (6.1.1 (c) (i)) | 1 |
| Brake performance not tested due to brake pipe burst |3.7.A.1| | 1 |
| Rear Prop shaft bearing housing insecure rubber mounting split right round |6.1.7 |f| |i|| | 1 |
| Nearside Front Suspension arm modified and seriously weakened |2.4.A.2| | 1 |
| Offside passenger door hinge insecure |6.2.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing areas |2.4.A.3| | 1 |
| Nearside Rear passenger door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/inner wheel arch |2.4.A.3| | 1 |
| Power steering malfunctioning juddering on lock |2.3.3a| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both when indicators are on |1.1.A.3f| | 1 |
| Offside Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Offside Rear Rear position lamp|s| not working stop light |1.1.A.3b| | 1 |
| Centre Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings rear cross member |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring hanger mounts and x member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring hanger mounts and x member |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner arches |2.4.A.3| | 1 |
| Nearside Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Brake hose bulging under pressure |3.6.B.3| | 1 |
| Nearside Inner Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill step (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting box section outrigger (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step/sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill/step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outrigger box section (6.2.2 (d) (i)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab corroded and cracked (7.1.1 (a) (i)) | 1 |
| Central Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab crossmember support excess corrosion (7.1.1 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis cab crossmember (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing around strut mount (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger /inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger innerwing (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing/chassis (6.1.1 (c) (i)) | 1 |
| Offside Rear Service brake lagging in operation 38% imbalance (1.2.1 (d)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab both sides (6.1.1 (c) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced be hind cab both sides (6.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackel mount (5.3.6 (a) (i)) | 1 |
| Emissions not tested large amount of black smoke (8.2.2.2 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring mount (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis under tipper body and holed by rust n/s inner leg (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring eye defective |shackle| rear bush |2.4.B.1b| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/ leaf spring mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/leaf spring mounting area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis member |2.4.A.3| | 1 |
| Front Position lamp not working both uppers (4.2.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and step (7.1.1 (a) (i)) | 1 |
| Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Central Lower Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
| Emissions not tested ex black smoke (8.2.2.2 (e)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet. (6.1.1 (c) (i)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt possibly damaged |2.2.C.1c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner/outer arch/step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner arch/ under bonnet |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step area and sill |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases Front pipe |7.1.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member as indicated |6.1.B.2| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system In wheel arche. (1.1.11 (b) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both outer sills. (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring cracked EYE BROKEN |2.4.B.1a| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded spring support |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting box section |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting box section |6.6.6| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill is heavily corroded |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases centre (6.1.2 (a)) | 1 |
| Nearside Rear Position lamp not working top (4.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working top (4.2.1 (a) (ii)) | 1 |
| Drive shaft bearing excessively worn centre (6.1.7 (b) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed under bonnet |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has 5 holes |6.1.B.2| | 1 |
| Front Suspension arm has excessive play in a pin/bush both |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is severely distorted by shocker mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded above shackle |2.4.A.3| | 1 |
| Fuel tank insecure support brackets corroded (6.1.3 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 1 |
| Front Brake pipe likely to become detached or damaged to rear pipes (1.1.11 (d) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis section (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area fractured significantly reducing structural strength centre chassis section (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring eye defective |anchor| eye is broken |2.4.B.1b| | 1 |
| Fuel system component insecure Rearmost tank support strap corroded and broken. |7.2.1| | 1 |
| Offside Body panel damaged and likely to cause injury mirror |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flexi mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis by mount |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings valance |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Body component corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corrosion hole in floor near seat mounting (6.2.2 (d) (i)) | 1 |
| Front Lower Fuel pipe union leaking |7.2.3| | 1 |
| Rear Brake cable damaged n/s and o/s |1.1.15 |a|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached bolt loose (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached bolt loose (5.3.4 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength chassis crossmember within rear spring front mounting bracket (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Upper Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D Bush (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D Bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced Jacking point (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wheel arch (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wheel arch (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wheel arch (6.2.2 (d) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired outer door sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Brake pipe excessively damaged on axle |1.1.11 |c|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember and inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill and wing |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured front (5.3.1 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Brake cable insecure snapped |3.5.1d| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis underside (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both very rear spring hangers |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Exhaust system not adequately supported broken front pipe |7.1.1| | 1 |
| Offside Track rod end loose lock nut |2.2.B.1d| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills both sides |7.1.1 |a| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded center cross member corroded |1.1.21 |e| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour lens broken showing white light |1.4.A.2f| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing pin moving in roll bar |2.4.G.2| | 1 |
| Centre Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings rear spring front mounting x-member cracked |6.1.B.2| | 1 |
| Nearside Rear Body insecure and dangerous to other road users rear body bolt loose, crane x-member |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users rear body bolt loose, crane x-member |6.1.B.1b| | 1 |
| Nearside Inner Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Fuel pipe excessively chafed |7.2.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear leaf spring, front mounting corroded |2.4.A.3| | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch sharp edges caused by corrosion |6.2.1 |a| |i|| | 1 |
| Nearside Body panel damaged and likely to cause injury side door sharp edges caused by corrosion |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Front Prop shaft joint excessively worn (6.1.7 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outa sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outa sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arches |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is severely distorted offside central front and rear chassis same |5.2.6| | 1 |
| Floor excessively deteriorated os and ns outer sill |6.2.4 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury wing /arch (6.2.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mounts |2.4.A.3| | 1 |
| Steering column flexible coupling insecure rubber bush through bulk head |2.1.5| | 1 |
| Rear Anti-roll bar pin or bush excessively worn Inner bushes (5.3.4 (a) (i)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment handbrake |1.1.15 |f|| | 1 |
| Bonnet cannot be secured in the closed position unable to re open without tools |3.1 |b| |i|| | 1 |
| Rear Leaf spring saddle is moving relative to the spring n/s and o/s u bolts loose |2.4.B.7a| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step / inner sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Dropside corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember over axle |2.4.A.3| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis plate (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch x3 (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch x2 (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body component insecure mudguard (6.2.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper crossmember (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper frame near hinge (6.1.1 (c) (i)) | 1 |
| Floor in such a condition it is likely to cause load insecurity or instability various holes in tipper bed floor (6.2.4 (a) (ii)) | 1 |
| Power steering pipe/hose leaking pipe into rack fitting (2.1.5 (a)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside inner and outer sill and step area (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside inner and outer sill and step area (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step and inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component ball joint excessively worn bottom ball joint |5.3.4 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced @ outer and inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi at rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp Light flashes when indicator is turned on. |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner and outer sill. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Chassis next to step. |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Body 30cm of spring mount. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Body 30 cm of spring mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch 30cm of shocker mount. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch 30cm of shocker mount. |2.4.A.3| | 1 |
| Offside Stop lamp not working repaired at time of test - ok |1.2.1b| | 1 |
| Nearside Front Upper Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened inner wheel arch to floor |5.3.3 |b| |i|| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting corroded and seriously weakened inner wheel arch to floor |5.3.3 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion to chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear corner |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear corner |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Front Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill and cab step rear door (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Lower arm rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Lower arm rear Bush (5.3.4 (a) (i)) | 1 |
| Prop shaft bearing housing likely to fail 2nd support bearing back (6.1.7 (f) (ii)) | 1 |
| Seat belt missing Unable to access belts due to loaded rear (7.1.2 (a)) | 1 |
| Nearside Direction indicator incorrect colour lens broken (4.4.3 (a)) | 1 |
| Anti-roll bar pin or bush excessively worn Both rear D bushs (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired tailgate/body corner (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired tailgate support/body (6.2.2 (d) (ii)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear tipper body panel (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside and offside body supports (6.2.2 (d) (i)) | 1 |
| Brake pedal pivot has excessive wear or free play (1.1.1 (b)) | 1 |
| Offside Front Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill marked yellow |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill marked yellow in few places |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering behind wheel in few places |6.1.1 |c| |ii|| | 1 |
| Stop lamp adversely affected by the operation of another lamp NSR stop lamp,sidelight and indicator affected by operation of fog lamp. |1.2.1f| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded OSR outer sill. |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded OSF inner wing corroded near top mount. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing, |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis member near shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis member Near shock absorber mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Lower/Inner sill near lower seat belt mounting |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Lower/inner sill near lower seat belt mounting |5.2.6| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle of vehicle |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near inner wheel arch |6.1.B.2| | 1 |
| Nearside Outer Body has a sharp edge caused by damage skin sill |6.1.C.1| | 1 |
| Offside Outer Body has a sharp edge caused by corrosion skin sill |6.1.C.1| | 1 |
| Brake hydraulic reservoir fluid level significantly below minimum level empty |1.1.10 |d| |ii|| | 1 |
| Nearside Oil leaking excessively from engine oil was topped up prior to test |8.4.1 |a| |i|| | 1 |
| Offside Rear position lamp|s| incorrect colour Lens damaged. |1.1.A.3e| | 1 |
| Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next too tank |6.1.1 |c| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated inner arch |6.2.4 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated inner arch |6.2.4 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step and surround |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in front of wishbone mount |2.4.A.3| | 1 |
| Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting back panel |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under panel |2.4.A.3| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Panel / cross member |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Panel / cross member |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill, center to front. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch next to rear panel. |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch next to rear panel. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step next to seat belt mounting. |6.1.B.2| | 1 |
| Offside Front Body component corroded and likely to cause injury wheelarch corroded and sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded to rear and side of subrame |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded to rear and side of subrame |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill area holed and corroded. |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis holed. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring |2.4.A.3| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid master |3.6.A.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassi leg |2.4.A.3| | 1 |
| Front Front position lamp|s| not working o/s&n/s |1.1.A.3b| | 1 |
| Centre Statutory seat belt missing seat stalk missing |5.1.1| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded Top mounting, rear of cab area corroded and perforated. |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing near strut |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired inner wing/door step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded for & aft of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded for & aft of spring |2.4.A.3| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view door |8.1.2a| | 1 |
| Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom |2.2.C.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg x2 |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded UNDER WING |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded UNDER WING |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded area |2.4.A.3| | 1 |
| Nearside Rear Leaf spring cracked spring eye broken off |2.4.B.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under wheel arch area |2.4.A.3| | 1 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system union wet possibly from fitment however due to nearside leak advise inspection & testing |1.1.11 |b| |ii|| | 1 |
| Nearside Rear Battery insecure and likely to cause a short circuit cable pinched by suspension bolt also |4.13 |a| |ii|| | 1 |
| Nearside Rear Tie bar/rod missing |2.4.G.1| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger - back of cab (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Body has a sharp edge caused by damage Mirror damaged sharp edges |6.1.C.1| | 1 |
| Rear Body mounting fixings insecure body subframe badly weakened by corrosion at rear and round ram area |6.2.2 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear spring hangers to rear cross member |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear out riggers |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis x 3 places |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch and all under door step x5 places |6.2.2 |d| |i|| | 1 |
| Nearside Rear Upper Shock absorber has an excessively worn shock absorber pivot pivot loose in chassis |2.7.4| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor above chassis |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor under drivers seat |5.2.6| | 1 |
| Offside Rear Anti-roll bar insecure link arm - lower nut loose |2.4.G.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing edge |6.1.C.1| | 1 |
| Offside Outer Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Direction indicators flashing less than 60 times a minute All |1.4.A.2g| | 1 |
| Offside Front Windscreen damaged and affecting the driver`s view of an obligatory external mirror |3.2 |a| |ii|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values plate limit = 0.7, vehicle blowing 5+ (8.2.2.2 (f)) | 1 |
| Fuel cap/sealing device ineffective not securing by positive means (6.1.3 (b) (i)) | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp side brake indicator lights (4.3.3 (b)) | 1 |
| Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced cross-member within 30cm of rear leaf spring hanger and tow bar (6.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced cross-member with in 30cm of rear leaf spring hanger and tow bar (6.1.1 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing and inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected front spring hanger |fiberglass| |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired rear spring hanger |fiberglass| |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |chassis| |5.3.6 |a| |i|| | 1 |
| Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii)) | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted off body |6.1.4 |a| |i|| | 1 |
| Power steering component leaking at rack |2.1.5 |a|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chasis |6.1.B.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill / step areas |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength out-rigger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out-rigger / inner sill areas |5.3.6 |a| |i|| | 1 |
| Prop shaft flexible coupling excessively deteriorated centre rubber housing |6.1.7 |d| |i|| | 1 |
| Stop lamp(s) all not working Both (4.3.1 (a) (iii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount area in two places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring area outrigger area and floor area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to floor area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by rear spring rear mounting |2.4.A.3| | 1 |
| Front Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring mount corroded through (5.3.6 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch / front subframe rear mount area (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch / engine mount area (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre chassis leg / front subframe rear mount area (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front leaf spring mount area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger / rear leaf spring mount area (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger / rear leaf spring mount area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger / front leaf spring mount area (6.1.1 (c) (i)) | 1 |
| Oil leaking excessively from engine Sump area (8.4.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear out rigger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quarter to valance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis inner arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded floor to arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis to inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger to quarter panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger to quarter panel |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under front arch (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under front arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner Sill Front |2.4.A.3| | 1 |
| Offside Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected light lens broken |4.4.1 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced a post (6.1.1 (a) (i)) | 1 |
| Offside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
| Nearside Rear Direction indicator incorrect colour cluter damaged |1.4.A.2f| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle Sliding Side Door |6.2.B.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring Mounts/ Out Riggers Rear Most |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring Mounts/ Out Riggers Rear Most |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Shock Mounts/ Floor/ Out Rigger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Strut Top |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Strut Top |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Shock Mounts/ Floor/ Out Rigger |6.1.B.2| | 1 |
| Nearside Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under bonnet, top of subframe mounting area |5.3.6 |a| |i|| | 1 |
| Brake master cylinder leaking Reservoir rubber seals |1.1.10 |b| |ii|| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D Bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D Bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush Lower Bush |2.4.G.2| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Behind the cab |6.1.B.2| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Behind the cab |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Above mount |2.4.A.3| | 1 |
| Offside Rear Upper Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Offside Rear Leaf spring to axle fixing bolt insecure Front U-Clamp lose (5.3.1 (a) (i)) | 1 |
| Offside Rear Leaf spring to axle fixing bolt insecure Rear U-Clamp lose (5.3.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Outline marker lamp not working Front Middle |4.2.1 |a|| | 1 |
| Nearside Outline marker lamp not working Rear Middle |4.2.1 |a|| | 1 |
| Offside Front Lower Mechanical brake component securing device missing |3.5.1i| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top/inner wing |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded 2x nearside centre outriggars |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panal |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panal |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by damage mirror cover |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 places |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch 2 plces |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember |6.1.A.1| | 1 |
| Towbar fixing obviously of an inappropriate type FIXING BOLTS TO SHORT |6.6.2| | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced main leg (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting cracked hub cracked where ball joint sits |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in various places |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in various places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in various places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in various places |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced on inner and outer seal |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced on inner and outer seal |7.1.1 |a| |i|| | 1 |
| Hand operated control valve damaged |3.2.1a| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement large rear bush see chalk mark |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering suspension mount |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle of chassis |6.1.B.2| | 1 |
| Electrical wiring damaged and bare connector exposed wiring for tipper electrics |1.9.2c| | 1 |
| Body insecure and dangerous to other road users rear body |6.1.B.1b| | 1 |
| Nearside Body has a projection caused by corrosion corrosion to underside of step |6.1.C.1| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp side with hazards (4.2.3 (c)) | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wheel arch (1.1.21 (e) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis rail (next to compensater) (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring mounting (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting, floor/arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting, floor/arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting, chassis to floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting, chassis to floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring |5.3.6 |a| |i|| | 1 |
| Hydraulic fluid leaking excessively power steering pump |8.4.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, various |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, various |5.3.6 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired cross member |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Windscreen damaged and affecting the drivers view of the road Zone A (3.2 (a) (ii)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting By the leaf spring Bracket (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis leg |near seat| |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sil |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sil area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sil area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step to inner sil area |5.2.6| | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. seat runners seized. |6.2.5 |b| |i|| | 1 |
| Headlamp not working on main beam both sides not working faulty switch flashes |4.1.1 |a| |ii|| | 1 |
| Fuel tank insecure fuel strap rusted through. |6.1.3 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision rust hole within 30cm of seat belt anchorage. |7.1.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rust hole within 30cm of suspension arm in chassis. |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering body mount (6.1.1 (c) (ii)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Cross member (6.1.1 (c) (ii)) | 1 |
| Power steering component modification unsafe Reservoir insecure (2.1.5 (f) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/ step area |5.2.6| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Fwd mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Fwd mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting area |2.4.A.3| | 1 |
| Offside Front Lower Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced step (6.1.1 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring hanger (6.1.1 (c) (i)) | 1 |
| Headlamp aim not tested both (4.1.2 (b)) | 1 |
| Direction indicators flashing more than 120 times a minute n/s and o/s |1.4.A.2g| | 1 |
| Offside Front Body has a projection caused by damage wing |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer step |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle exhaust |2.3.2| | 1 |
| Anti-roll bar attachment bracket insecure |2.4.G.5| | 1 |
| Nearside Headlamp not working on dipped beam LLB472 (4.1.1 (a) (ii)) | 1 |
| Offside Stop lamp(s) not working LLB382 (4.3.1 (a) (ii)) | 1 |
| Body has an unsafe modification SHARP EDGES FRONT WINGS (6.2.1 (d) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired SIEZED (1.1.17 (a)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii)) | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn prop centre bearing |2.4.G.4d| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch,marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger,marked yellow |2.4.A.3| | 1 |
| Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Nearside Rear Body pillar so insecure that load stability or security is likely to be seriously impaired (6.2.1 (b) (ii)) | 1 |
| Offside Rear Body pillar insecure (6.2.1 (b) (i)) | 1 |
| Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mount to chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing to sill |2.4.A.3| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis x 2 |6.1.B.2| | 1 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis at cable mount |3.1.9| | 1 |
| Rear Brake pipe inadequately supported both pipes bracket corroded |3.6.B.1| | 1 |
| Centre Rear Seat belt anchorage prescribed area is excessively corroded cab |5.2.6| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded complete sill |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded X 4 |2.4.A.3| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger near spring |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings silol |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inner wing area |6.1.B.2| | 1 |
| Nearside Rear Inner Floor in such a condition it is likely to cause load insecurity or instability wheel arch |6.2.4 |a| |ii|| | 1 |
| Offside Rear Inner Floor in such a condition it is likely to cause load insecurity or instability wheel arch |6.2.4 |a| |ii|| | 1 |
| Nearside Front Inner Body component corroded and likely to cause injury sill/foot step |6.2.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member to sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch outer chassis |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch outer chassi |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Middle cross member. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced By cross member. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg under bonnet. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Two patches on chassis leg (6.1.1 (c) (ii)) | 1 |
| All position lamps have a product on the lenses or light sources which significantly reduces light intensity All rear inoperative (4.2.3 (b) (ii)) | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OS |6.1.B.2| | 1 |
| Headlamp aim not tested NSF Headlamp damaged |1.8.A.1c| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing two places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around rear spring mtng (5.3.6 (a) (i)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp affected by brake lamp (4.2.3 (c)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under step (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis after wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis back of van (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under step (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Oil leaking excessively from engine between vac pump and water pump (8.4.1 (a) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear bulkhead |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring area (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded load sensing valve area (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x member and chassie |2.4.A.3| | 1 |
| Front Service brake excessively fluctuating both sides (1.2.1 (e)) | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint joint insecure in hub |2.5.B.1a| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength arch areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring out rigga |2.4.A.3| | 1 |
| Central Steering component mounting prescribed area is excessively corroded U J (2.1.2 (e) (i)) | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn propshaft |2.4.G.4d| | 1 |
| Nearside Front Radius arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear subframe |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both D bushes |2.4.G.2| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both drop links |2.4.G.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal rack to pipes |2.3.3b| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering excessive corrosion under body all marked in green paint , to many to list seperate |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill and under step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner front arch as marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under step as marked in white (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced osf inner arch as marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer were blue strap is (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mounting |5.3.6 |a| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OSF SILL, FRONT INNER WHEEL ARCHES (6.2.2 (d) (i)) | 1 |
| Rear Anti-roll bar ball joint likely to become detached BOTH (5.3.4 (a) (ii)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under wheel arch |6.1.B.2| | 1 |
| Nearside Front Power steering pump leaking from a failed joint |2.3.3b| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near front spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near front spring hanger |2.4.A.3| | 1 |
| Fuel system component leaking excessively or a risk of fire on engine |6.1.3 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded By shockabsorber mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded By fuel tank |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill and step |2.4.A.3| | 1 |
| Rear front parking |secondary| brakes imbalanced |3.7.B.6b| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush `D` Bush on rear axle |2.4.G.2| | 1 |
| Nearside Inner Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower door step |6.1.B.2| | 1 |
| Centre Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded leaf spring hanger |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded leaf spring hanger |2.4.A.3| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis next to engine |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear rear spring mounting area inner sill/arch (5.3.6 (a) (i)) | 1 |
| Offside Outer Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Front drive shaft damaged |2.5.C.2a| | 1 |
| Offside Sub-frame locating pin insecure |2.4.G.3a| | 1 |
| Drive belt excessively worn |6.1.7 |c| |i|| | 1 |
| Offside Rear fog lamp does not emit a steady red light lighting up reverse light |4.5.4 |a|| | 1 |
| Power steering malfunctioning heavy operation |2.1.5 |a|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sillto step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Lower Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush Both side rear `D` bushes worn. |2.4.G.2| | 1 |
| Towbar fractured seriously affecting its strength within 30cm of towbar mounting 2 X split (6.1.6 (i) (i)) | 1 |
| Outline marker lamp showing white light to the rear both, + non standard (4.2.3 (a) (ii)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion side step |6.1.C.1| | 1 |
| Central Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill next to rear axle |6.1.B.2| | 1 |
| Front Outer Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Front Gas suspension unit leaking |2.4.D.2| | 1 |
| Nearside Rear Gas suspension unit leaking |2.4.D.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step inner sill |5.2.6| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis around l/s/v |3.1.9| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded close to front shackle mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded close to front shackle mount |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering behind cab |6.1.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded rear of cab/crossmember |5.2.6| | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture not clipped up (1.1.11 (a)) | 1 |
| Front Suspension arm pin or bush excessively worn both rear bushes (5.3.4 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under step and outrigger fractured and corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering of cab (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering of cab (6.1.1 (c) (ii)) | 1 |
| Windscreen in such a condition that visibility through swept area is seriously affected windscreen cracked (3.2 (c) (ii)) | 1 |
| Anti-roll bar pin or bush excessively worn all rear bushes worn (5.3.4 (a) (i)) | 1 |
| Fuel tank so insecure there is a risk of fire fuel tank strap loose (6.1.3 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened Mountng |5.3.1 |b| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis as marked |6.1.B.2| | 1 |
| Hazard warning switch faulty no offside flashers working |1.4.B.1d| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt also has slight play |2.2.C.1c| | 1 |
| Centre Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis around rear leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis around rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis around front of the leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill around the front of the leaf spring hanger |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near engine mounting |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around engine mounting |2 areas| |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired shackle |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill & step corroded |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside and offside inner sill front and rear |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside and offside front inner wheel arches near suspension components |6.1.B.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Lower |2.4.G.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded Nearside seat outer mounting point area |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings significant corrosion
do not restest until full re inspection of corrosion
n/s sill
o/s sill
both front wheel arches
both rear wheel arches
both rear leaf spring mountin points
|6.1.B.2| | 1 |
| Towbar component insecure bolts loose |6.6.1| | 1 |
| Offside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Brake cable guide defective and affecting operation Snapped (1.1.15 (d)) | 1 |
| Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Nearside Rear Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.29 |7.4.B.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near side and off side heavy corosion outer chassi rails |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under steps |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch / sill |2.4.A.3| | 1 |
| Passenger`s airbag missing |7.1.5 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer panel to sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded front of rear spring outrigger |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill by step |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill by step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both lower sill front to rear and rear crossmeber |2.4.A.3| | 1 |
| Offside Outer Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Lower Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
| Offside Front Upper Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Inner Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Offside Rear Inner Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Nearside Rear Inner Service brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Inner Service brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Emissions not tested too much smoke for emissions tester (8.2.2.2 (e)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step x2 (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central by cab (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn back (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn back (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength Upper drop link mounting point (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis rale |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis |6.1.1 |c| |i|| | 1 |
| Nearside Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Offside Front Coil spring mounting corroded and seriously weakened inner wing by strut top (5.3.1 (b) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength by rear fixing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/floor (5.3.6 (a) (i)) | 1 |
| Nearside Direction indicator incorrect colour side repeater (4.4.3 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced center inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chaasea (5.3.6 (a) (i)) | 1 |
| Front Lower Suspension arm has excessive play in a ball joint o/s n/s |2.4.G.2| | 1 |
| Nearside Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Prop shaft flexible coupling excessively deteriorated center bearing |6.1.7 |d| |i|| | 1 |
| Offside Rear Rear reflector reflecting white to the rear Lens damaged |4.8.2 |a| |ii|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill panel |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded hanger mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing x3 |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step are |5.2.6| | 1 |
| Offside Inner Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch |6.1.1 |a| |i|| | 1 |
| Rear Brake pipe inadequately supported rear brake flexi pipes insecure held on with cable ties |3.6.B.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering many places (6.1.1 (c) (ii)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear end of offside inner sill under vehicle. |2.4.A.3| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp not working with sidelights on |1.2.1f| | 1 |
| Front Power steering pump insecure |2.3.6| | 1 |
| Offside Front Drive shaft which forms part of the suspension coupling gaiter missing |2.4.G.4e| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sil |6.1.B.2| | 1 |
| Offside Front Brake pedal pad not secure to the pedal |3.3.A.1c| | 1 |
| Brake cable has wires broken and is significantly weakened parking brake |3.5.1b| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under brake servo and inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by front spring eye / inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear spring eye / inner sill (5.3.6 (a) (i)) | 1 |
| Offside Inner Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Fuel pipe leaking Fuel overflow pipe missing. (6.1.3 (b) (i)) | 1 |
| Nearside Rear Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre chassis |2.4.A.3| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired nearside load sense valve seized in position (1.1.17 (a)) | 1 |
| Offside Front Headlamp light intensity severely reduced headlamp aim and light source defused (4.1.4 (a)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded outer sill, |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s & n/s |6.1.B.2| | 1 |
| Body insecure and dangerous to other road users o/s/r mud guard loose |6.1.B.1b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f & n/s/f inner steps & cill |6.1.B.2| | 1 |
| Centre Front drive shaft coupling flexible rubber or fabric coupling unit severely cracked |2.5.C.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger rear most |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sil |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger rear most |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arches both sides |5.3.6 |a| |i|| | 1 |
| Seat belt damaged (7.1.2 (b) (i)) | 1 |
| Nearside Rear Upper Body component likely to become detached N/S/R upper door hinge (6.2.1 (a) (ii)) | 1 |
| Nearside Rear Body has a sharp edge caused by damage lamp
|6.1.C.1| | 1 |
| Offside Front Road wheel bead rim badly distorted on inner |4.2.A.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded above sub frame mounting bolt |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole above engine mounting support |through wheel arch| |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole above engine mounting support |through wheel arch| |6.1.B.2| | 1 |
| Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush arm bush |2.5.A.1c| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded above sub-frame mounting bolt |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area above subframe |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area within 30cm of suspension strut mount |5.3.6 |a| |i|| | 1 |
| Offside Seat belt attachment fitting fractured |5.2.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step area corroded within 30cm of seat belt mounting |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear floor x2 |5.3.6 |a| |i|| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is inadequately repaired sill spot welded |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is inadequately repaired sill spot welded |5.2.6| | 1 |
| Nearside Front Lower Vehicle structure has a modification which adversely affects braking or steering chassis leg holed |6.1.A.1| | 1 |
| Offside Front Lower Vehicle structure has a modification which adversely affects braking or steering chassis leg holed |6.1.A.1| | 1 |
| Nearside Front Road wheel badly damaged rim damaged |4.2.A.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake excessively binding hand brake (1.2.1 (f)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded By leaf spring |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis on top of subframe by brake pipes |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel multible |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings multible |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings multible |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel multible |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch multible |6.1.B.2| | 1 |
| Nearside Front Lower Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 1 |
| Supplementary Restraint System warning lamp indicates a fault air bag warning lamp |5.4.2| | 1 |
| Nearside Front Track rod end ball joint has excessive play also rubber dust cover damaged |2.2.B.1f| | 1 |
| Front Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both rear lights affected by hazards |1.1.A.3f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded load valve |2.4.A.3| | 1 |
| Fuel tank insecure strap |7.2.1| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| front leaf spring eye broken |2.4.B.1b| | 1 |
| Body insecure and dangerous to other road users vehicle rear flat bed 50% of securing bolts missing |6.1.B.1b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All areas of corrosion marked. Front and rear both sides|tow bar mount area, outrigger area, inner arches,load sensing valve area,step area,outer and inner sill area,o/s/f engine mount area, |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg above subframe/ track control arm mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing /arch area corroded by shocker upper mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member and floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member and floor (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt arm ball joint cover |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt arm ball joint cover |2.4.G.2| | 1 |
| Centre Rear Brake cable has restricted free movement Hand brake cable fouling exhaust heat shield |3.5.1k| | 1 |
| Offside Side repeater incorrect colour lenes missing |1.4.A.2f| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear most bush |2.4.G.2| | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Rear Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers chair |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rail as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting..... |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting...... |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg........ |2.4.A.3| | 1 |
| Nearside Rear Inner Leaf spring fractured |2.4.B.1a| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp wirh indicator |1.1.A.3f| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Front AND rear hanger Perscribed areas incl chassis sections/inner arch and inner/outer bodyside panels |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front AND rear hanger perscribed areas incl chassis sections/inner arch/ inner and outer bodyside panels |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near leaf spring mounting marked in chalk |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near leaf spring mounting marked in chalk |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside outer centre sill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded centre sill |2.4.A.3| | 1 |
| Nearside Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Offside Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is inadequately repaired Sill step |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired Sill |7.1.1 |a| |i|| | 1 |
| Nearside Upper Front position lamp|s| not working marker lights |1.1.A.3b| | 1 |
| Offside Upper Front position lamp|s| not working marker lights
|1.1.A.3b| | 1 |
| Offside Rear Outer Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Outer Suspension spring mounting prescribed area is excessively corroded wheel housing |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel housing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step underside |2.4.A.3| | 1 |
| Towbar component insecure bolts missing |6.6.1| | 1 |
| Offside Dropside cannot be secured in the closed position hinge missing |6.4.1| | 1 |
| Nearside Hinged tailboard cannot be secured in the closed position catch missing |6.4.1| | 1 |
| Nearside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings under back of cab |6.1.B.2| | 1 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings under back of cab |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mount area |2.4.A.3| | 1 |
| Offside Front Body insecure and dangerous to other road users BUMPER LOOSE |6.1.B.1b| | 1 |
| Nearside Front Track rod end ball joint has excessive play AND TRACK ARM |2.2.B.1f| | 1 |
| Offside Direction indicator obviously incorrectly positioned |1.4.A.2b| | 1 |
| Nearside Body has a sharp edge caused by corrosion inner sill x1 |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion inner sill x2 |6.1.C.1| | 1 |
| Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded door step / under sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded door step / under sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired under sill |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Offside rear inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement LOWER ARM REAR BUSH |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement LOWER ARM REAR BUSH |2.4.G.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Marked in yellow |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Marked in yellow |6.2.2 |d| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Putter sill |6.1.B.2| | 1 |
| Nearside Front Inner Steering rack has excessive free play detected at the steering wheel (steering rack fitted) TIE ROD (2.3 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Upper Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired welding incomplete |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg to brake compensator mounting |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing to strut mounting |2.4.A.3| | 1 |
| Front Wheel nut|s| loose both |4.2.A.1e| | 1 |
| Rear Wheel nut|s| loose both |4.2.A.1e| | 1 |
| Nearside Rear Hand operated control valve unit insecure |3.2.2a| | 1 |
| Offside Rear Brake valve leaking hub seal (1.1.7 (d) (i)) | 1 |
| Front Seat belt flexible stalk stretched or damaged likely to lead to failure under load (7.1.2 (b) (ii)) | 1 |
| Offside Rear Integral body structure strengthening plate or fastening insecure (6.1.1 (b) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outrigger |6.1.A.1| | 1 |
| Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing /floor areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel/floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded transverse box section |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER CORNER |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER CORNER |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WING |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush link insecure |2.4.G.2| | 1 |
| Nearside Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 1 |
| Nearside Inner Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp flashing with indicator |1.2.1f| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch ,in front of wheel |2.4.A.3| | 1 |
| Nearside Front passenger door hinge deteriorated so the door cannot be readily opened or closed sliding door |6.2.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount point (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount point (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount point (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rearmost bush |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to wheel arch within 30 cm of spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail within 30 cm of spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail within 30 cm of spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to wheel arch within 30 cm of spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step to sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Outer sill to wheel arch not continuous weld (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength All of the inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Inner sill not a continuous weld (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired Outer sill no a continuous weld (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Outer wheel arch not a continuous weld (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Inner Cv gaiter securing ring loose , grease evident (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/body |2.4.A.3| | 1 |
| Nearside Rear Stop lamp not working when position lights on |1.2.1b| | 1 |
| Offside Rear Stop lamp not working when position lights on |1.2.1b| | 1 |
| Nearside Front position lamp|s| adversely affected by the operation of another lamp when brake lights on |1.1.A.3f| | 1 |
| Offside Front Front position lamp|s| adversely affected by the operation of another lamp when brake lights on |1.1.A.3f| | 1 |
| Centre Front Brake pedal anti-slip provision loose |3.3.A.1b| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch to chassis (5.3.6 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear most |2.4.G.2| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis leg / brake compensating valve mounting |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg / engine mounting area |2.4.A.3| | 1 |
| Fuel system component leaking from injector area |7.2.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded sub mount |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded sub mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded spring in arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near upper shock mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i)) | 1 |
| Brake lever locking device insecure |3.5.1l| | 1 |
| Offside Outer Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| All position lamps not working Two side markers |1.1.A.3b| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Drivers step |6.2.2 |d| |i|| | 1 |
| Nearside Obligatory indirect vision device seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded outrigger box section by rear of subframe. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber - inner chassis. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember, inner quarter. 3 holes. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger box section. Next to spring mounting. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing, holed and cracked. 2 areas. |2.4.A.3| | 1 |
| Steering wheel weakened by modification |2.1.1| | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn rear most bush |5.3.4 |a| |i|| | 1 |
| Central Prop shaft bearing excessively worn centrel rear mounting worn out |6.1.7 |b| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired 3 areas nearside and offside |6.2.2 |d| |ii|| | 1 |
| Offside Fuel system component leaking |7.2.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTRIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTRIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS AT FRONT SHACKLE |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS AT FRONT SHACKLE |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS BY BUMP STOP |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS BY BUMP STOP |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CROSSMEMBER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CROSSMEMBER |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS UNDER WHEEL ARCH |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS UNDER BONNET |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rear chassie to cross member |2.4.A.3| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded chassie to cross member |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear bush adrift |2.4.G.2| | 1 |
| Nearside Front Inner Floor excessively deteriorated step |6.2.4 |a| |i|| | 1 |
| Offside Front Inner Floor excessively deteriorated step |6.2.4 |a| |i|| | 1 |
| Offside Rear Inner Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Nearside Rear Inner Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind cab |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of cab (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt missing clasp - belt also slightly frayed |7.1.2 |a|| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel at top of engine around injectors |8.4.1 |a| |i|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp by indicator (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring - inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring - inner sill / rear valence (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake lagging in operation lagging on and off (1.2.1 (d)) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine . |7.4.B.3b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded OUTTER SILL |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CENTRE X MEMBER |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CENTRE X MEMBER FRONT AND BACK |2.4.A.3| | 1 |
| Offside Rear Upper Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings NSF INNER ARCH , BOTH INNER ARCHS , OSR INNER SILL , OSR CHASSIS LEG |6.1.B.2| | 1 |
| Speed limiter plate not clearly and indelibly marked with the set speed |6.5.A.2a| | 1 |
| Offside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Central Front Upper Fuel system component leaking on the engine |7.2.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mounting |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis n/s/f by fuel filler pipes |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s underside step |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/ underside step |5.2.6| | 1 |
| Nearside Body has a projection caused by damage sill |6.1.C.1| | 1 |
| Centre Rear Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 1 |
| Offside Front Suspension arm pin or bush excessively worn lower arm bush |5.3.4 |a| |i|| | 1 |
| Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks tow bar |4.11 |c| |iii|| | 1 |
| Rear Fuel tank insecure STRAP MISSING (6.1.3 (a) (i)) | 1 |
| Power steering component leaking RACK (2.1.5 (a)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light showing white light lens broke (4.5.4 (a)) | 1 |
| Brake cable damaged centre cable fraying (1.1.15 (a)) | 1 |
| Exhaust fumes causing a danger to health of persons on board egr pipe broken engine bay (6.1.2 (b) (ii)) | 1 |
| Nearside Rear Floor excessively deteriorated flat bed |6.2.4 |a| |i|| | 1 |
| Nearside Floor excessively deteriorated flat bed outriggers |6.2.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chasiss |6.1.A.1| | 1 |
| Nearside Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center chassis |6.1.B.2| | 1 |
| Nearside Front Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Offside Front Braking system leaking pipe |3.6.A.1| | 1 |
| Nearside Rear Braking system leaking lav valve |3.6.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing suspension mount and chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing suspension mount and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and suspension mount and chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and suspension mount and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill door step (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top, bottom and sides front chassis members |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top, bottom and sides chassis members |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid chassis leg |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step area |6.1.B.2| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger and chassis |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle outrigger |6.1.B.2| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle Sliding door |6.2.B.1c| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside rear box section |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near side rear spring hanger box section |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear cross member |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Off side inner and outer sill holed |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both front inner wings |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre chassis outrigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre chassis outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill/innersill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring shackle area |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside and nearside sills |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner/Outer sill area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner/Outer sill area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill area |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flooring |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sealing |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arsh |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flooring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings under wheel arsh |6.1.B.2| | 1 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended tow bar socket missing |1.9.4| | 1 |
| Nearside Front Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 1 |
| Offside Front Upper Anti-roll bar attachment bracket/mounting fractured broken |2.4.G.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded inner wheel arch/sill holed |5.2.6| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded step holed |2.2.C.1h| | 1 |
| Offside Front Outer Steering component mounting prescribed area is excessively corroded sill holed |2.2.C.1h| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded outrigger holed |2.2.C.1h| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded centre outrigger holed |2.2.C.1h| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount / chassis holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of rear chassis holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of rear inner sill holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded of rear inner sill holed |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded upper wheel arch |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting bulkhead to chassis leg |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting bulkhead to chassis leg |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg |6.2.2 |d| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg |6.2.2 |d| |i|| | 1 |
| Nearside Fuel pipe excessively damaged |7.2.2| | 1 |
| Rear Braking system leaking Load sensing valve leaking |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis area above subframe mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Front Lower Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
| Front Body component corroded and likely to cause injury Both sides wings |6.2.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering To rear inner and outer sill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering To rear |6.1.1 |c| |ii|| | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Both sides inner |5.3.6 |a| |i|| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings the n/s front chassis leg is heavily corroded and so is the n/s/f front outrigger |6.1.B.2| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded rigger |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front & rear mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front & rear mounting areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting areas |2.4.A.3| | 1 |
| Brake valve insecurely mounted mounting area corroded |3.6.A.2a| | 1 |
| Nearside Front Headlamp adversely affected by the operation of another lamp cuts out with full beam |1.7.5c| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake pipe modified and seriously weakened |3.6.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded excessively inside and out |2.4.A.3| | 1 |
| Rear passenger door does not latch securely closed Held closed with bungee rope |6.2.B.1a| | 1 |
| Parking brake recording little or no effort |3.7.D.3a| | 1 |
| Centre Rear Towbar locking device missing |6.6.3b| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis leg at bulkhead |3.6.C.3| | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward facing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear facing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward facing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear facing |2.4.A.3| | 1 |
| Rear Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Braking system leaking metal brake pipe |3.6.A.1| | 1 |
| Emissions not tested due to low oil (8.2.2.2 (e)) | 1 |
| Front Headlamp not working on dipped beam both nearside and offside |1.7.5a| | 1 |
| Front Headlamp not working on main beam both nearside and offside |1.7.5a| | 1 |
| Front Front position lamp|s| not working nearside and offside |1.1.A.3b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension mounting point |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to boot floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to boot floor |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by gearlever, seat mounting point |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near spring hanger |6.1.B.2| | 1 |
| Offside Front Driver`s seat insecure pin missing |6.2.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear |2.4.A.3| | 1 |
| Nearside Front Steering system lock to lock check twists a brake pipe |2.2.D.2b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 30 cm spring mounts |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 30 cm spring mounts |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring mount |6.1.B.2| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Inner wing |3.6.C.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired Front mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired Rear mount area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom balljoint |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering and rear both sides |6.1.A.1| | 1 |
| Offside Outer Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing corrosion |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing corrosion |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sills front to rear |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step corroded |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye mounting area and inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eye mounting area and across slam panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting area and slam panel |2.4.A.3| | 1 |
| Rear Brake lever has restricted free movement brake compensator |3.5.1k| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear most cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sills |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg X4 |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced outrigger cracked (6.1.1 (a) (i)) | 1 |
| Front Lower Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing wheel arch |5.3.6 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired Outer sill |5.2.6| | 1 |
| Nearside Ball joint has excessive play Inner rack end ? |2.2.B.1f| | 1 |
| Nearside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced upper inner wing chassis/wheel arch (6.1.1 (d) (i)) | 1 |
| Offside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced upper inner wing chassis/wheel arch (6.1.1 (d) (i)) | 1 |
| Nearside Front Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced to rear lower inner/outer sills (6.1.1 (d) (i)) | 1 |
| Offside Front Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced to rear lower inner/outer sills (6.1.1 (d) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired inner/outer sills/steps (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired inner/outer sills/steps (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is inadequately repaired both front and rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired both front and rear (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount inner arch (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear chassis |2.4.A.3| | 1 |
| Fuel system component leaking under bonnet (6.1.3 (b) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Fuel pipe union leaking under bonnet (6.1.3 (b) (i)) | 1 |
| Fuel pipe union leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of both steps, within 30cm of subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch various patches of corrosion (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch various patches of corrosion (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced top of door frame (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced top of screen (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced top of door frame (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced chassis rail, next to fuel tank (6.1.1 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside front chassis rail, around the engine mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded crossmember |2.1.2 |e| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear mount area |5.3.6 |a| |ii|| | 1 |
| Rear Lower Towbar retaining device missing |6.6.3a| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassie rotten |2.4.A.3| | 1 |
| Offside Front Integral body structure has a fractured which is likely to adversely affect braking or steering inner arch 30cm of strut mounting (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Brake pipe excessively damaged yellow chalk (1.1.11 (c)) | 1 |
| Offside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outer Sill (2.1.2 (e) (ii)) | 1 |
| Offside Rear Outline marker lamp showing white light to the rear End Lamp (4.2.3 (a) (ii)) | 1 |
| Offside Hazard warning lamps inoperative All O/S Not Working Hazards (4.4.1 (e)) | 1 |
| Seat belt anchorage prescribed area is fractured Fractured beside Drivers seat mounting |5.2.6| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength NSR and OSR inner sills |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring to axle securing bolt insecure both u bolts |2.4.B.7b| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure both u bolts |2.4.B.7b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded xmember |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassia in wheel arch |2.4.A.3| | 1 |
| Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch to chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step in two places (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/strut top (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner body sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch corner |6.1.1 |c| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.22 limit (8.2.2.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By rear spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top shocker mount |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint excessively worn lower |5.3.4 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner by spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner by spring mounting |5.3.6 |a| |i|| | 1 |
| Central Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Drivers foot step has hole due to corrosion, within prescribed area of seat belt anchorage |5.2.6| | 1 |
| Brake disc significantly and obviously worn BOTH FRONT INNER FACE |1.1.14 |a| |i|| | 1 |
| Rear Shock absorber has a serious fluid leak x 2 |2.7.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hanger |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut turret (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill and centre (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and centre (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring front outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced has 50 % less light |1.7.5a| | 1 |
| Offside Rear wheel cylinder has restricted free movement brake binding wheel doesnt turn when jacked up |3.5.1k| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn prop.shaft bearings broken |2.4.G.4d| | 1 |
| Offside Front Driver`s seat moving inadvertently bolt missing |6.2.5 |b| |ii|| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp bad earth fault |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill fort spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill front spring mount |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort foot and hand brake |3.7.B.5a| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside rear inner sills / out riggers |2.4.A.3| | 1 |
| Front Bumper insecure nearside and offside (6.1.4 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step, inner and outer (7.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner sill X3 (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting valance X4 (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as chalked. |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure has excessive corrosion which adversely affects braking or steering inner and outer sill - as chalked. |6.1.1 |c| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked. |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced as chalked. |7.1.1 |a| |i|| | 1 |
| Nearside Front Track rod end ball joint has excessive play & offside |2.1.3 |b| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s inner and outer body sills |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch corroded and holed in number of places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch with 30cm of shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg and floor corroded and holed in number of places |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to rear (5.3.6 (a) (i)) | 1 |
| Rear Stop lamp|s| remains on when the brakes are released |4.3.2 |a| |iii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength beside spring hanger |5.3.6 |a| |i|| | 1 |
| Outer Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Marked (5.3.6 (a) (i)) | 1 |
| Nearside Brake cable insecure Rubbing on Road wheel (1.1.15 (c)) | 1 |
| Nearside Front Tie bar/rod insecure |2.4.G.1| | 1 |
| Nearside Outer Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Lower Body has a projection caused by damage |6.1.C.1| | 1 |
| Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Offside Rear Leaf spring with an unsafe modification misaligned |5.3.1 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outter and inner sill (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill |6.1.B.2| | 1 |
| Front Fuel tank insecure Tank support strap corroded |7.2.1| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D rubber |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D rubber |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis by engine cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar shock absorber and spring anchor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar shock absorber and spring anchor (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wing panel under wheel arch and chassis in engine bay (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by shock absorber top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan by seat mounting (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Inner Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Rear Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring fixing area front and rear |6.1.A.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion arch to sill |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and off side rear |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill middle and rear |6.1.B.2| | 1 |
| Nearside Rear Stop lamp|s| light intensity significantly reduced Light cluster - all lamps adversely affected, possible bad earth |4.3.3 |a| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis |6.2.2 |d| |ii|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill, step, front and rear inner arches |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill, step, front and rear inner arches |6.1.1 |c| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced All chassis crossmembers |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quarter |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quarter |6.1.1 |c| |i|| | 1 |
| Nearside Front Body insecure wing |6.2.2 |a| |i|| | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 1 |
| Nearside Front Outer Suspension arm ball joint excessively worn lower (5.3.4 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded driver step |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded near topmount |2.4.A.3| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearmost leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step near seat base (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt installation anchorage insecure bolt loose (10.1 (d)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury sill/arch (6.2.1 (a) (i)) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Direction indicator incorrect colour lamp cover broken |1.4.A.2f| | 1 |
| Rear Tailgate damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis in five places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in two places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing in two places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing in three places |2.4.A.3| | 1 |
| Rear Parking brake |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in 5 places |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing in 2 places |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wing in 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing in two places. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill in two places |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front spring fixing (5.3.6 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seat fixing area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seat fixing area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear fixing areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear fixing areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber fixing |inner wing| |5.3.6 |a| |i|| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded back off cab |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill (5.3.6 (a) (i)) | 1 |
| Suspension arm pin or bush excessively worn both front lower arm rear bushes slightly worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury wing excessively corroded (6.2.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired chassis |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing and chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and sill area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Braking system leaking Offside front pipe |3.6.A.1| | 1 |
| Offside Rear Brake drum contaminated possible brake cylinder (1.1.14 (b)) | 1 |
| Prop shaft bearing housing likely to fail Second from front (6.1.7 (f) (ii)) | 1 |
| Fuel tank insecure Front tank strap corroded (6.1.3 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush lifting out of suspension arm |2.4.G.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded door step/area |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Front Upper Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
| Central Prop shaft flexible coupling excessively deteriorated centre bearing split (6.1.7 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by step (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded rear of wing |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded rear of wing |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded near spring mounting |2.4.A.3| | 1 |
| Nearside Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured |front eye| |2.4.B.1a| | 1 |
| Offside front brake binding slow to release |3.7.B.1| | 1 |
| Offside Rear Parking brake inoperative on one side Parking brake has a low reading |1.4.1 |a|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Buck |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Buck |6.2.2 |d| |ii|| | 1 |
| Offside Front Inner Brake disc contaminated (1.1.14 (b)) | 1 |
| Fuel cap/sealing device ineffective fuel cap not of locking type |6.1.3 |b| |i|| | 1 |
| Prop shaft joint excessively worn rear doughnut |6.1.7 |c| |i|| | 1 |
| Nearside Inner Front An item not tested |Manual| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door sill and step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door sill and step |5.2.6| | 1 |
| Offside Rear fog lamp not working & lense broken |1.3.2b| | 1 |
| Nearside Rear Direction indicator incorrect colour lamp damaged |1.4.A.2f| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour lamp damaged |1.1.A.3e| | 1 |
| Nearside Front All direction indicators incorrect colour white (4.4.3 (a)) | 1 |
| Front Upper All outline marker lamps not working roof (cab) both sides (4.2.1 (a) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner and outer and step (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Fuel tank insecure |6.7.1b| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor corrosion |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s above bump stops |6.1.B.2| | 1 |
| Emissions not tested bad black smoke |7.3.A.1| | 1 |
| Nearside Rear Body insecure and dangerous to other road users plastic arch insecure |6.1.B.1b| | 1 |
| Nearside Rear Body component insecure mud guard (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component insecure mud guard (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger at front spring eye |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded At front spring eye |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill and step |6.1.B.2| | 1 |
| Outer Rear engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view glass |3.3 |b| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Inner Steering linkage ball joint has excessive play rack |2.1.3 |b| |i|| | 1 |
| Nearside Rear Trailer electrical socket likely to become detached (4.10 (a) (ii)) | 1 |
| Nearside Front Upper Body component damaged and likely to cause injury mirror back (6.2.1 (a) (i)) | 1 |
| Front Bonnet primary retaining device ineffective no access to engine bay (3.1 (c)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by step (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rust hole is step (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rust hole in wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rust hole in rear of cab (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Under front wheel arch. (5.3.6 (a) (i)) | 1 |
| Nearside Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded near engine mounting |2.4.A.3| | 1 |
| Front Fuel system component leaking top engine |7.2.3| | 1 |
| Body insecure and dangerous to other road users nuts/bolts and washers missing |6.1.B.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in several places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in several places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis rail + chassis cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis rail + chassis cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis rail by compensator (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis by anti roll bar link (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/side and o/side inner and outer sills |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings near spring mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Bottom of step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Bottom of step |6.1.B.2| | 1 |
| Rear Direction indicator obviously incorrectly positioned |1.4.A.2b| | 1 |
| Nearside Front Lower Body panel corroded and likely to cause injury Sill (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner/ outer sill and step (7.1.1 (a) (i)) | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer multiple places |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills multiple places |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Nearside Front Lower Body panel corroded and likely to cause injury Outer sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger by front mount of leaf spring. (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under arch by shock tower. (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and step. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By rear leaf spring mount. (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt stitching badly frayed |5.2.2b| | 1 |
| Rear Anti-roll bar inappropriately repaired |2.4.A.2| | 1 |
| Front Hydraulic fluid leaking excessively brake fluid reservoir under |8.4.1 |a| |i|| | 1 |
| Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 1 |
| Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Rear Body mounting fixings insecure such that stability is seriously impaired rear chassis extensions rusted through |6.2.2 |c| |ii|| | 1 |
| Nearside Inner Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Outer Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired centre and rear lower inner panel |6.2.2 |d| |ii|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chaasis rail |2.4.A.3| | 1 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded floor |3.1.9| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor/arch |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front inner sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Centre Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
| Nearside front brakes release unevenly |3.8.A.2d| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at the rear |2.4.A.3| | 1 |
| Prop shaft joint excessively worn front joint splines excessively worn |6.1.7 |c| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s lower door step area |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s innersill |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s innersill area |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis legs above axle |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis.under bonnet |3.6.C.3| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis crossmember |3.1.9| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded cross member in front of axle in several places |2.4.A.3| | 1 |
| Front Fuel system component leaking engine bay area |7.2.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering ABOVE REAR AXLE |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above rear axle |6.1.A.1| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center outrigger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings undersill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings undersill |6.1.B.2| | 1 |
| Front suspension has excessive play in a lower suspension ball joint offside and nearside |2.5.B.1a| | 1 |
| Offside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Brake pedal anti-slip provision missing brake pedal rubber missing |3.3.A.1b| | 1 |
| Rear fog lamp not working o/s/r |1.3.2b| | 1 |
| Nearside Front outline marker lamp|s| not working |1.1.B.1c| | 1 |
| Inner Rear Fuel tank insecure |7.2.1| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Nearside Outer Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| steering rack track rod inner joint |2.2.A.1b| | 1 |
| Nearside Rear Leaf spring missing |5.3.1 |c| |i|| | 1 |
| Offside Front Outer Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury Under step |6.2.8 |b|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Flitch |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Air box fitch |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under step / wheel arch inner |2.4.A.3| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded under servo and around engine mount |3.6.C.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded around brake compensator |3.1.9| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassy |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassy |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inside wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inside wheel arch |2.4.A.3| | 1 |
| Nearside Brake hose stretched |3.6.B.4c| | 1 |
| Emissions not tested Due to engine sounding very rough (8.2.2.2 (e)) | 1 |
| Nearside Body component damaged and likely to cause injury Sliding door handle (6.2.1 (a) (i)) | 1 |
| Offside Front Service brake grabbing severely (1.2.1 (c)) | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp Bulb fitted wrong |1.1.A.3f| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp Bulb fitted wrong |1.2.1f| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp Direction indicator
|1.1.A.3f| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Marked yellow |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Marked yellow||inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Van Floor||Marked yellow |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded Loadvalve||Marked yellow |3.3.A.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger next to mudflap |6.1.B.2| | 1 |
| Offside Front Lower Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Front Brake cable has restricted free movement |3.5.1k| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor as marked |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor around gear selection assy |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x member above axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x member above axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x member front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger under wheel arch front of axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger under wheel arch front of axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger under wheel arch rear of axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger under wheel arch rear of axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by spring hanger |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x 4 most of the sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake load valve |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected sil;l (5.3.6 (a) (ii)) | 1 |
| Emissions not tested black smoke (8.2.2.2 (e)) | 1 |
| Central Prop shaft joint excessively worn bearing bush worn and split (6.1.7 (c) (i)) | 1 |
| Offside Rear Outline marker lamp not working side |4.2.1 |a|| | 1 |
| Offside Outline marker lamp not working central side |4.2.1 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Shock top mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Shock top mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Step / floor |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step / floor |5.2.6| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting Rear cross member |6.6.6| | 1 |
| Offside Towbar retaining device insecure Bolts loose |6.6.3a| | 1 |
| Centre Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Offside Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Glazing/screen/partition not made of safety glass or safety glazing |6.9.8| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.5.1e| | 1 |
| Offside Front Driving control|s| defective due to rubbish likely to interfere with the proper control of the vehicle. |6.8.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining pressure on the sealing arrangement |6.7.2a| | 1 |
| Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Complete Outer sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to rear leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to rear leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Step |2.4.A.3| | 1 |
| Central Front Inner Suspension component mounting prescribed area is excessively corroded Step |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by air filter (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Electrical wiring insecure and connectors likely to become disconnected floor (4.11 (a) (ii)) | 1 |
| Centre Upper Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Body has a sharp edge caused by corrosion load compartment step |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion tipper frame |6.1.C.1| | 1 |
| Nearside Body has a projection caused by damage door mirror |6.1.C.1| | 1 |
| Brake load sensing valve seized arm was seized up |3.6.E.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and inner wheel arch |2.4.A.3| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| play in offside and nearside steering rack track arms |2.2.A.1b| | 1 |
| Brake pipe leaking along car |3.6.A.1| | 1 |
| Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Nearside Front Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded 2 separate areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded 2 separate areas |2.4.A.3| | 1 |
| Offside Front Braking system leaking brake caliper |3.6.A.1| | 1 |
| Offside Outer Rear Torsion bar attachment bracket loose |2.4.E.4a| | 1 |
| Centre Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Front constant velocity joint is insecure Clip Broken |2.5.C.1b| | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement lower gearbox |6.1.8 |a| |i|| | 1 |
| Nearside Rear Road wheel fixing missing Wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area and step area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section near spring eye shackle |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded front crossmember |2.4.A.3| | 1 |
| Front Steering component mounting prescribed area is excessively corroded cross memeber |2.2.C.1h| | 1 |
| Front Steering system lock to lock check stretches a brake pipe |2.2.D.2b| | 1 |
| Offside Stop lamp(s) not working came on when tapped (4.3.1 (a) (ii)) | 1 |
| Rear Exhaust system insecure clamp (6.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength at spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at inner arch |5.3.6 |a| |i|| | 1 |
| Offside Front Brake pipe likely to become detached or damaged insecure |1.1.11 |d| |ii|| | 1 |
| Brake cable guide defective and affecting operation cables snapped |1.1.15 |d|| | 1 |
| Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross bar for bumper n/s and o/s |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis /sill |6.1.B.2| | 1 |
| Offside Front Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill and door step area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg behind wheel also separated from floor area |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Rear Fuel system component insecure |7.2.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded all rear |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all front chassis sections+inner wings |6.1.B.2| | 1 |
| Nearside Body has a projection caused by corrosion Sill |6.1.C.1| | 1 |
| Nearside Front Inner Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Body has a projection caused by corrosion Sill |6.1.C.1| | 1 |
| Offside Front Inner Body has a projection caused by corrosion Wheel arch |6.1.C.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail is holed and corroded within 300mmof leafspring front mount,and next to inner sill corrosion too |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill is holed and corroded within 300mm of nearside leaf spring front mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch has corrosion (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step to inner sill to floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch close to engine mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer door sill to inner wheel arch ,within 30cm of leaf spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch to floor (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre door post to outer doorsill to floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded suspension arm mounting area in front cross member |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded suspension arm mounting area in front cross member |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock absorber mounting |wheel arch| |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded wing patch not continuously welded within prescribed area |2.4.A.3| | 1 |
| Offside Outer Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired expanding foam |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired expanding foam |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front off spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front off spring |2.4.A.3| | 1 |
| Nearside Front Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Headlamp aim not tested both |1.8.A.1c| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/door step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired inner sill/door step area |5.2.6| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| nsf and osf inner track rod ends excess play. |2.2.A.1b| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill. |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step. |6.1.B.2| | 1 |
| Nearside Front engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill`s |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill`s |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both ends of leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both ends of leak spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER WING (5.3.6 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTTER SILL (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTTER SILL (7.1.1 (a) (i)) | 1 |
| Rear Lower Body has a sharp edge caused by corrosion crossmember |6.1.C.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cossmember |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill. |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch. |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch near top mount mounting (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x6 |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis subframe mounting (5.3.6 (a) (i)) | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded nearside rear chassis compensator (1.1.21 (e) (i)) | 1 |
| Nearside Inner Front Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| brockenfront eye |2.4.B.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded above axle |2.4.A.3| | 1 |
| Centre Rear Brake linkage has abnormal movement of levers indicating excessive wear |3.5.1f| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Step area. (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cab step |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cab step |6.1.1 |c| |i|| | 1 |
| Prop shaft joint excessively worn rear center bearing rubber cracked and separated |6.1.7 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vertical chassis rail |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor behind road wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor behind road wheel |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills & step |6.1.B.2| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sills & step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger rear of arch |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear x memer |6.1.B.2| | 1 |
| Rear Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced multiple near sill/ step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring multiple (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near leaf spring multiple (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill multiple (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring multiple (5.3.6 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to back multiple (6.2.2 (d) (i)) | 1 |
| Nearside Outer Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s door step (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s floor (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s inner sill (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer step |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member in front of rear cross member |2.4.A.3| | 1 |
| Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab floorpan |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sills |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner/outer sill |5.2.6| | 1 |
| Nearside Outer Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by the wheel arches |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member nearside and offside |6.1.B.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all lights inop |1.4.A.2h| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch / shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch / shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis / compensater (1.1.21 (e) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre out rigger (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nsr osr chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nsf osf inner wings |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Ns os steps |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Ns os inner outer sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Rear x member |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nsr osr inner wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nsf osf chassis |2.4.A.3| | 1 |
| Offside Obligatory mirror insecure And the glass is damaged |3.3 |b| |ii|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill holed under step |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch, corroded, holed, jagged edges |6.1.1 |c| |i|| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded adjacent to load sensing valve |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded adjacent to bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded adj to bump stop |2.4.A.3| | 1 |
| Emissions not tested smoke meter failed during test, due to amount of smoke (8.2.2.2 (e)) | 1 |
| Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill | step | |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component corroded and seriously weakened inner wing and turret (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength upper chassis rail (5.3.6 (a) (i)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp nearside |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp nearside |1.2.1f| | 1 |
| Exhaust has a major leak of exhaust gases front |7.1.2| | 1 |
| Offside Front Suspension arm pin or bush excessively worn Bottom arm rear bush. |5.3.4 |a| |i|| | 1 |
| Service brake excessively fluctuating 80% fluctuation. |1.2.1 |e|| | 1 |
| Centre Front Sub-frame cracked |2.4.G.1| | 1 |
| Brake pipe inadequately clipped n/s around engine bay |3.6.B.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` event sticker |8.3.1e| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor, marked yellow |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member, marked yellow |6.6.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on the chassis |marked yellow| |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring rear mount |marked yellow| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by the shock |marked yellow| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mount |marked yellow| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mount |marked yellow| |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both spring hangers as chalked |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember as chalked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill as chalked |6.1.B.2| | 1 |
| Obligatory mirror missing interior mirror missing (3.3 (a)) | 1 |
| Supplementary restraint system warning lamp indicates a fault airbag |7.1.6 |a|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill/door step area/s |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing under wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassis near engine mount |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis above engine mount |2.4.A.3| | 1 |
| Front Position lamp not working Both sides |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicators not working intermittent |1.4.A.2c| | 1 |
| Offside Outer Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Fuel system component leaking injection pump |7.2.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill, door step, inner arch |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill, door step and inner arch |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |front of leaf spring| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |front of leaf spring| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area to rear of leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area to rear of leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger to front of leaf spring |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Center (6.2.2 (d) (i)) | 1 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 1 |
| Central Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Rear position lamp|s| incorrect colour lamp unit damaged |1.1.A.3e| | 1 |
| Nearside Rear Leaf spring splayed and fouling spring fouling chassis at shackle |2.4.B.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member corroded to excess |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member corroded to excess |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor inner wheel arch by shock absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor inner wheel arch by shock absorber |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced B post cracked by door catch . (7.1.1 (a) (i)) | 1 |
| Rear Brake valve leaking such that brake functionality is affected Load valve . (1.1.7 (d) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step near seat mounting corroded and holed . (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corroded and multiple holes in shackle mounting area . (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corroded and multiple holes in spring shackle mounting areas . (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arches and chassis legs are corroded both sides . (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Floor inside van by spring shackle mounting . (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength Lower wheel arch area . (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step by seat mounting . (7.1.1 (a) (i)) | 1 |
| Central Prop shaft bearing housing insecure centre prop-shaft bearing rubber split/ bearing loose and moving around. (6.1.7 (f) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment End of travel 15 clicks. |1.1.6 |c|| | 1 |
| Nearside Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner+outer sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner +outer sill |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side |6.1.B.2| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded and outer sills |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded 1/4 panel |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member spare wheel soport |2.4.A.3| | 1 |
| Central Front Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected MAIN CHASSIE CORRODED AT REAR OF REAR SPRING HANGER . NO CHASSIE |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected REAR SPRING HANGER REPAIRED BUT NOT WELDED ALL ROUND |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected BUMP STOP MTG CORRODED COULD DISLOGE FROM CHASSIE |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected BUMP STOP ON O/S/REAR SPRING CORRODED |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired BRAKE VALVE MTG CORRODED BROKEN AWAY FROM CHISSE |1.1.17 |a|| | 1 |
| Nearside Rear Integral body structure has a fractured which is likely to adversely affect braking or steering MAIN CHASSIE SPLIT IN FRONT OF N/S /R SPRING |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired OUT RIGGERS CORRODED. MAIN CHASSIE TO INER SILL |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUT RIGGER CORRODED INER SILL TO MAIN CHASSIE |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired N/S/F DOOR STEP PEPAIR BROKEN AWAY FROM BODY |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired DOOR STEP SPLIT AND BROKEN AWAY FROM INER SILL |6.2.2 |d| |ii|| | 1 |
| Brake performance not tested BRAKES NOT TESTED BECAUSE OF CORROSION ON MAIN CHASSIE |1.2.1 |g|| | 1 |
| Nearside Ball joint has excessive play inner track rod |2.2.B.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded upper shock absorber mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor under seat mount area |7.1.1 |a| |i|| | 1 |
| Prop shaft bearing excessively worn bearing carrier |6.1.7 |b| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing area |5.3.6 |a| |i|| | 1 |
| Inner Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Front suspension has excessive movement at a tie bar joint |2.5.A.1c| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp with side lights |1.4.A.2h| | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp with side and indicator |1.3.2f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting area holed inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring box section holed marked in yellow |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded upper chassis leg area |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front and rear of spring mounts/box sections marked yellow |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front and rear of spring mounts/box sections marked yellow |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step area marked yellow |5.2.6| | 1 |
| Body component damaged and likely to cause injury sharp edges both sides of luton body |6.2.1 |a| |i|| | 1 |
| Nearside Front Body component damaged and likely to cause injury windscreen surround (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury windscreen surround (6.2.1 (a) (i)) | 1 |
| Nearside Body panel damaged and likely to cause injury holed and sharp (6.2.1 (a) (i)) | 1 |
| Offside Body panel damaged and likely to cause injury holed and sharp (6.2.1 (a) (i)) | 1 |
| Nearside Body panel insecure front of luton (6.2.1 (a) (i)) | 1 |
| Rear Axle swivel joint has excessive movement between a swivel joint and its housing |2.5.A.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear suspension leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner cill - front suspension leaf spring mount |2.4.A.3| | 1 |
| Centre Brake pipe excessively chafed |3.6.B.2c| | 1 |
| Offside Rear Lower Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
| Nearside Front Body panel damaged and likely to cause injury wheel arch rusted |6.2.1 |a| |i|| | 1 |
| Rear Service brake effort inadequate at a wheel Both |1.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end, in wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail, in wheel arch |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering middle section |6.1.A.1| | 1 |
| Offside Front Prop shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Offside Front Body insecure and dangerous to other road users grill |6.1.B.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch as marked |2.4.A.3| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced under wheel arch in prescribed area of seat belt anchor and suspension |6.1.1 |a| |i|| | 1 |
| Central Prop shaft bearing housing likely to fail both propshaft bearing internal rubber mount detached |6.1.7 |f| |ii|| | 1 |
| Offside Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor pan at drivers seat |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill [as marked] |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel tub x3 [as marked] |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill x2 [as marked] |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner lower quarter [as marked] |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill x2 [as marked] |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner tub x2 [as marked] |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired outer sill not fully welded [as marked] |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing x2 [as marked] |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing [as marked] |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill [as marked] |5.2.6| | 1 |
| Nearside Ball joint has excessive play inner rack joint can be seen through gator as it is insecure |2.2.B.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger , rear spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer panel , rear spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer panel , rear spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount outer sill |2.4.A.3| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing |3.6.C.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring hanger |6.1.B.2| | 1 |
| Brake relay lever excessively damaged and seriously weakened |3.5.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner quarter panel |2.4.A.3| | 1 |
| Nearside Front Trailing arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Seat belt webbing significantly stretched (7.1.2 (b) (ii)) | 1 |
| Exhaust emissions exceed manufacturers specified limit limit = 1.9 Actual reading 3.2 (8.2.2.2 (a)) | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected Showing white light (4.4.1 (b) (ii)) | 1 |
| Offside Dropside corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Dropside corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Body component corroded and likely to cause injury buck floor and cross members (6.2.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Leaf spring anchor pin retaining device insecurely fitted |2.4.B.3b| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement inner bushes |2.4.G.2| | 1 |
| Nearside Anti-roll bar rubber bush deteriorated resulting in excessive movement link rod |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement link rod |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement link |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement link rod |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded park brake cable prescribed area hole due to corrosion (1.1.21 (e) (i)) | 1 |
| Front Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Front Inner Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
| Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg box section holed and corroded in several areas (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg box section holed and corroded in several areas
(unsatisfactory repair also carried out) (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed and corroded, near strut top mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed and corroded near strut top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis bed holed and corroded, near rear tilt pivot (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting bed chassis holed and corroded near rear tilt pivot (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step to outrigger (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab (6.1.1 (c) (i)) | 1 |
| Brake pedal pad not secure to the pedal rubber worn |3.3.A.1c| | 1 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened drop link and o/s/r droplink |2.4.G.1| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear of |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear of |2.4.G.2| | 1 |
| Body insecure and dangerous to other road users unable to test under bonnet items |6.1.B.1b| | 1 |
| Offside Hazard warning lamps inoperative All three (4.4.1 (e)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch x 2 |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre x member |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength close to leaf spring (5.3.6 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion tailgate |6.1.C.1| | 1 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp stays on with tail light |1.3.2f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded top of chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded top of chassis rail |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |leaf spring mounting| |2.4.A.3| | 1 |
| Offside Front Position lamp missing |4.2.1 |a|| | 1 |
| Hazard warning switch faulty o/s lights not working |1.4.B.1d| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams swich faulty |1.7.4b| | 1 |
| Rear Panhard rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around shocker top (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength door step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer side (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer side (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at the rear (5.3.6 (a) (i)) | 1 |
| Nearside Brake pivot excessively damaged and seriously weakened |3.5.1e| | 1 |
| Offside Brake pivot excessively worn and seriously weakened |3.5.1e| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/floor/chassis leg |5.2.6| | 1 |
| Offside Rear Leaf spring seriously weakened forward eye (5.3.1 (b) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2 areas (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush in front lower wishbone deteriorated |2.4.G.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside chassis (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross members (6.1.1 (c) (i)) | 1 |
| Body component corroded and likely to cause injury nearside sill (6.2.1 (a) (i)) | 1 |
| Body component corroded and likely to cause injury rear body in several places (6.2.1 (a) (i)) | 1 |
| Offside Rear Position lamp showing white light to the rear lens broken |4.2.3 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all along outside of chassis |5.3.6 |a| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger , spring anchor |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 1 |
| Nearside Front Lower Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Torque/reaction arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER SILL CLOSE TO SPRING MOUNTING |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded front inner wing corroded near to strut mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing corroded near to strut mounting |2.4.A.3| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp affected by use of stop lights |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill near spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near shocker mounting |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside& offside front inner sill corroded |5.2.6| | 1 |
| Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
| Rear Front passenger seat insecure |6.2.3| | 1 |
| Offside Rear Upper Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under wing flitch panel |5.3.6 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and under sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn wishbone rear bush |5.3.4 |a| |i|| | 1 |
| Centre Front Upper Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner outer sills |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked in yellow |6.1.B.2| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on all |1.4.B.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rigger/inner sills/outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rigger |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both sides chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step/rigger |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch inner |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired floor underneath passenger seat marked with yellow chalk (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis area marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Hazard warning lamps not flashing in phase, with ignition off rear |1.4.B.1f| | 1 |
| Inner Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Centre Brake pivot has restricted free movement hand brake pivot siezed |3.5.1k| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mount front eye |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mount rear eye |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor,spring mounts |2.4.A.3| | 1 |
| Nearside Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Power steering malfunctioning drive belt loose (2.1.5 (a)) | 1 |
| Power steering component leaking from reservoir cap missing (2.1.5 (a)) | 1 |
| Offside Front Upper Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired box section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired box section (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill / step |5.2.6| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded chassis / inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is inadequately repaired floor panel |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill / chassis |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill /chassis |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded spring hanger / chassis |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded spring hanger / chassis |2.4.A.3| | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings brake valve support |6.1.B.2| | 1 |
| Nearside Outer Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Outer Rear Anti-roll bar insecure |2.4.G.1| | 1 |
| Offside Outer Rear Anti-roll bar insecure |2.4.G.1| | 1 |
| Nearside Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill/step area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting, floor- inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting , floor-inner arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch sill |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement lower |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innersill nxt to outrigger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill nxt to outrigger |6.1.B.2| | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 1 |
| Front Exhaust system insecure rubber (6.1.2 (a)) | 1 |
| Offside Rear Leaf spring fractured main spring |2.4.B.1a| | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced step (6.1.1 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis rails and leaf spring mounting points have four separate holes |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail collapsed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail leaf spring mounting point collapsed |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of rear axle. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of rear axle {fibre glass found] |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded bulkhead to strutt housing [behind expansion tank under bonnet] |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strutt housing /inner wing[fibreglassed] |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail over rear axle |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail over rear axle |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has a modification which adversely affects braking or steering chassis rail over rear axle |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail in several places. |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger behind n/s front wheel corroded through
|6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills corroded through under steps |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner wheelarch to floor corroded through |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s and n/s rear inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at hanger |2.4.A.3| | 1 |
| Centre Rear Brake pipe inadequately clipped across axle |3.6.B.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear sub frame mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger at spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength In front of arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Behind arch (5.3.6 (a) (i)) | 1 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp bad earth (4.3.3 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at sub frame mounting (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step, inner sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger, rear of spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger, front of spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg - shock absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg - shock absorber |2.4.A.3| | 1 |
| Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip (6.1.7 (g) (ii)) | 1 |
| Suspension component mounting prescribed area is excessively corroded whole of vehicle excessively corroded underneath |2.4.A.3| | 1 |
| Offside Front Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Offside Front Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Lower Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Outer Rear Anti-roll bar worn and seriously weakened |2.4.G.1| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp all rear lights interacting |1.1.A.3f| | 1 |
| Bonnet retaining device ineffective bonnet catch deteriated |8.4.2| | 1 |
| Seat belt insecurely fixed to the seat middle seatbelt attachment missing |5.2.1a| | 1 |
| Obligatory mirror seriously obscured affecting the rear view n/s mirror |8.1.2a| | 1 |
| Offside Rear Body has a sharp edge caused by damage indicater lense |6.1.C.1| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Nearside Direction indicators flashing more than 120 times a minute front/rear |1.4.A.2g| | 1 |
| Offside Direction indicators flashing more than 120 times a minute front/rear |1.4.A.2g| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Body has a projection caused by corrosion arch holed |6.1.C.1| | 1 |
| Offside Front Inner Body has a projection caused by corrosion floor holed near seat belt |6.1.C.1| | 1 |
| Offside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step not welded |6.1.B.2| | 1 |
| Body has a projection caused by corrosion crossmember above propshaft holed |6.1.C.1| | 1 |
| Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 |6.1.B.2| | 1 |
| Nearside Outer All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Outer All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Lower Body has a sharp edge caused by corrosion wheel arches |6.1.C.1| | 1 |
| Offside Rear Lower Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded both mountings chassis/inner/outer sills |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded both mountingschassis inner/outer sills |2.4.A.3| | 1 |
| Offside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced wing |6.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill front to rear |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill front to rear |6.1.1 |c| |i|| | 1 |
| Nearside Inner Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp earth fault on rear lamp unit (4.2.3 (c)) | 1 |
| Front Fuel tank insecure tank strap corroded in two |7.2.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section by leaf spring mounting |6.1.B.2| | 1 |
| Front drive shaft coupling has excessive play in a universal joint bearing |2.4.G.6b| | 1 |
| Offside Rear Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside passenger door catch missing |6.2.B.2| | 1 |
| Offside Brake rod insecure |3.5.1d| | 1 |
| Nearside Outer Front Seat belt fluffed or frayed sufficient to obstruct correct operation of the belt |5.1.B.3b| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement inner rear bush as marked |2.4.G.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner to outer sill three places (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail bump stop rubber missing aswell (6.2.2 (d) (i)) | 1 |
| Offside Front Upper brake disc excessively scored |3.5.1h| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outriggers & inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outriggers & inner wheel arch |2.4.A.3| | 1 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Steering component excessively corroded and unserviceable 1 power steering pipe on rack heavily corroded |2.2.C.1d| | 1 |
| Offside Shock absorber detached |2.7.2b| | 1 |
| Offside Rear Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner outer sill |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired cross member |2.4.A.3| | 1 |
| Nearside Rear Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Suspension arm which is adjustable, loose in adjustment threads |2.4.G.1| | 1 |
| Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill b post |6.1.B.2| | 1 |
| Offside Front Coil spring worn so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Front Anti-roll bar which is adjustable, locking device missing |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail over axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail over axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount, chassis and surrounding bodywork |2.4.A.3| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring mounts |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at engine mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle side |6.2.B.1b| | 1 |
| Rear Passenger`s seat insecure unable to check additional rear seat and belts fitted and no side windows fitted |6.2.A.1| | 1 |
| Exhaust system not adequately supported poor condition |7.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all along the inner seal/chassis |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings across the rear chassis section |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all across the inner seal/chassis |6.1.B.2| | 1 |
| Nearside Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing rear |2.5.B.1a| | 1 |
| Nearside Inner Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Emissions not tested due to excessive oil leak (8.2.2.2 (e)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door sill (7.1.1 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Upper All position lamps not working marker |1.1.A.3b| | 1 |
| Offside Rear All position lamps not working marker |1.1.A.3b| | 1 |
| Nearside Front Steering damper leaking oil |2.2.C.1f| | 1 |
| Offside Front Steering damper leaking oil |2.2.C.1f| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected By spring anchor bolt |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected By spring shackle mountings |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected By spring anchor bolt |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected By spring shackle mounting`s |5.3.6 |a| |ii|| | 1 |
| Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached |6.1.6 |i| |ii|| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Both side`s of chassis between length of spring`s holed and spreading |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger front |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger front |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger rear |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills door steps |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills door steps |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both front and rear spring mountings and outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both spring hanger mountings front and rear of rear springs |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL/STEP (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CENTRE INNER SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 1 |
| Offside Front Coil spring fractured or broken BROKEN (5.3.1 (b) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill. (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x3 holes |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 holes |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor near shock |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch , infront of and behind wheel |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit Plate limit 0.68, actual reading 4.45 |8.2.2.2 |a|| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassia |3.1.9| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Stepcorroded |6.1.1 |c| |i|| | 1 |
| Stop lamp not working offside |1.2.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear chassis/outrigger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis inner face |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear inner valance |2.4.A.3| | 1 |
| Shock absorber has a serious fluid leak offside rear |2.7.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded quater |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded quater |2.4.A.3| | 1 |
| Offside Leaf spring fractured spring eye broken |2.4.B.1a| | 1 |
| Offside Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded bottom rear of cab |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor of cab |5.2.6| | 1 |
| Anti-roll bar has excessive play in a pin/bush Both rear D-bushes |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill and floor |5.2.6| | 1 |
| Offside Front Brake pipe kinked twisted and kinked |3.6.B.2b| | 1 |
| Nearside Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 1 |
| Body has a sharp edge caused by corrosion tipper back |6.1.C.1| | 1 |
| Rear Body insecure and dangerous to other road users wheel guard |6.1.B.1b| | 1 |
| Rear brake drum contaminated by brake fluid both |3.5.1h| | 1 |
| Nearside Side repeater light intensity significantly reduced |4.4.3 |a|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner/outer sills |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner/outer sills |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wheel arch lower sill |6.1.C.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill into step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch at front |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near spring mounting |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near spring mount |6.1.B.2| | 1 |
| Nearside Front Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded ARCH |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded ARCH |2.4.A.3| | 1 |
| Nearside Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 1 |
| Offside Front Upper Dropside component insecure pin missing |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch area numerous corroded areas |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch area numerous areas of corrosion |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected arch area and chassis section |5.3.6 |a| |ii|| | 1 |
| Nearside Front Outer Seat belt anchorage likely to become detached in the event of a collision sill |7.1.1 |a| |ii|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i|| | 1 |
| Front passenger door catch insecure tighten bolts on hindge |6.2.3 |c| |ii|| | 1 |
| Front Bonnet cannot be secured in the closed position free catch |3.1 |b| |i|| | 1 |
| Rear Parking brake lever has no reserve travel reset travel |3.1.6b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings end panel |6.1.B.2| | 1 |
| Offside Front Body component insecure sideboard |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component insecure tailgate |6.2.1 |a| |i|| | 1 |
| Offside Outer Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside Rear Lower Leaf spring anchor pin excessively loose in its bracket |2.4.B.3a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to tipper swivel as marked |6.1.B.2| | 1 |
| Nearside Rear Body insecure and dangerous to other road users wing loose |6.1.B.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded next to seat mount prescribed areas (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing areas (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe area (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded front of door step |5.2.6| | 1 |
| Passengers seat with a defective structure (6.2.6 (a) (i)) | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush bush out of arm |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring (chassis) (5.3.6 (a) (i)) | 1 |
| Offside Rear Braking system leaking Wheel cylinder |3.6.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel area |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded complete sill inner and outer |5.2.6| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Two Spots |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill And Wheel Arch Area |6.1.1 |c| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Central Outer Sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wing |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Two Spots |6.1.1 |c| |i|| | 1 |
| Offside Rear position lamp|s| not working also lens broken, so may show direct white light to rear |1.1.A.3b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Offside step to inner sill- step completely detached from inner sill- as per marked |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal around power steering pinion assembly |2.3.3b| | 1 |
| Prop shaft bearing housing likely to fail front mount |6.1.7 |f| |ii|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear spring front mount area |2.4.A.3| | 1 |
| Power steering component leaking steering rack/power steering pipes (2.1.5 (a)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner sill under vehicle 2x places (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s outer sill at rear (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s outer sill at rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s under wing at front (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s front inner flitch under wing (6.1.1 (c) (i)) | 1 |
| Electrical wiring insecure to chassis |1.9.2a| | 1 |
| Front Lower Suspension arm ball joint excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near back of leaf spring |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded sill/step |2.4.A.3| | 1 |
| Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values 1st reading 4.82 1/m.
Limit 1.22 1/m. |8.2.2.2 |f|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring eye area |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top, full length. (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top full length. (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab. (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ outrigger. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember/ spring mounting bracket. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body insecure and dangerous to other road users mudguard support bracket corroded and rubbing on wheel |6.1.B.1b| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Shock absorbers likely to become detached Axle mounting excessively corroded (5.3.2 (a) (ii)) | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross Member (6.1.1 (c) (i)) | 1 |
| Offside Rear Body component likely to become detached mud guard , and mounting brackets |6.2.1 |a| |ii|| | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced door step, underneath. |6.1.1 |a| |i|| | 1 |
| Rear Fuel tank insecure tank strap, broken/ corroded. |6.1.3 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Front Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member.. (6.1.1 (c) (i)) | 1 |
| Offside Rear Body component insecure mud guard brackets bent, rubbing on wheels. (6.2.1 (a) (i)) | 1 |
| Offside Front Road wheel fixing missing stud broken. (5.2.1 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab. (6.1.1 (c) (i)) | 1 |
| Prop shaft securing bolt loose center bearing flange bolt. (6.1.7 (a) (i)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement REAR ARM BUSH |2.4.G.2| | 1 |
| Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounts x2 |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced sills |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring rear mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring rear mount |2.4.A.3| | 1 |
| Nearside Steering rack gaiter insecure gaitor twisted/split |2.2.D.2d| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.1c| | 1 |
| Offside Front Upper Anti-roll bar attachment bracket bolt missing |2.4.G.5| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.13.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Offside Seat belt anchorage prescribed area is cracked |5.1.B.7| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheelarch |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top of chassis inside engine bay |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring shackle outrigger/inner sill panel |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor panel inside side load door |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSSMEMBER |6.1.B.2| | 1 |
| Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing.. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower mounting area. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting. |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill to Floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings And Rear and Back |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail both sides |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring hanger |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis sections near to front spring hanger mounts |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear chassis near to rear shackle mounts |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill to floor area |2.4.A.3| | 1 |
| Fuel tank insecure front tank support corroded |7.2.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner door step |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired 3 times under the wheel arch chauked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded twice chauked |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill chauked |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill chauked |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering [front]rear leaf spring shackle |6.1.1 |c| |ii|| | 1 |
| Offside Direction indicator incorrect colour LENCE BROKEN |1.4.A.2f| | 1 |
| Nearside Body has a sharp edge caused by damage DOOR MIRROR COVER MISSING |6.1.C.1| | 1 |
| Offside Rear Upper All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Side repeater missing lens missing |1.4.A.2b| | 1 |
| Offside Rear Rear position lamp|s| not working side marker |1.1.A.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded and holed (5.3.6 (a) (i)) | 1 |
| Front Windscreen damaged and affecting the drivers view of the road several cracks (3.2 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed in two places (5.3.6 (a) (i)) | 1 |
| Emissions not tested throttle pedal broken |7.3.A.1| | 1 |
| Offside Inner Front Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassia at tow bar mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount at chassia |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hangaer |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassia at tow bar mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mount at chassia |5.3.6 |a| |i|| | 1 |
| Nearside Stop lamp|s| light intensity significantly reduced bad earth |4.3.3 |a| |ii|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Fuel tank insecure Straps broken |7.2.1| | 1 |
| Nearside Body component damaged and likely to cause injury Mirror cover missing |6.2.1 |a| |i|| | 1 |
| Nearside Front Track rod end ball joint has excessive play and dust cover |2.2.B.1f| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint and dust cover |2.4.G.2| | 1 |
| Centre Statutory seat belt of the wrong type. clasp should be stalk |5.1.1| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & outer sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & outer sill |6.1.B.2| | 1 |
| Nearside Rear Brake pipe inadequately supported hose junction |3.6.B.1| | 1 |
| Nearside Front Brake pipe inadequately supported hose junction |3.6.B.1| | 1 |
| Hazard warning switch inoperative missing (4.4.2 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam bad earth (4.1.1 (a) (ii)) | 1 |
| Bonnet primary retaining device ineffective not opening (3.1 (c)) | 1 |
| Fuel tank insecure front strap missing |7.2.1| | 1 |
| Fuel tank insecure rear strap badly cracked |7.2.1| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering door step |6.1.1 |c| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired door step |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn front bush |5.3.4 |a| |i|| | 1 |
| Offside Front Body component damaged and likely to cause injury door mirror sharp edge |6.2.1 |a| |i|| | 1 |
| Offside Rear Service brake indicates brake judder |3.7.D.1| | 1 |
| Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases flexi |6.1.2 |a|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch X2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch X3 |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near engine crossmember |6.1.B.2| | 1 |
| Front Body component corroded and likely to cause injury N/S & O/S (6.2.1 (a) (i)) | 1 |
| Front wheel bearing rough when rotated N/S & O/S |2.5.A.2| | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected |1.1.7 |d| |ii|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep/inner sill (7.1.1 (a) (i)) | 1 |
| Rear Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner sill and step area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill and step area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill, front of leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to floor area, next to leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to floor area, next to leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill to rear of leaf spring and outrigger/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill to rear of leaf spring and outrigger/chassis area |2.4.A.3| | 1 |
| Offside Rear Upper Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement Anit roll bar links. |2.4.G.2| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |shackle| Front bush. |2.4.B.4| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Rear Seat belt retracting mechanism defective all |5.2.5b| | 1 |
| Rear Seat belt not functioning as intended On All Nine Rear Seats. Very Dangerous, |7.1.2 |c|| | 1 |
| Rear Seat belt cut sufficient to obstruct correct operation of the belt All Seat Belts not working |5.2.2a| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner side step (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Seat belt webbing significantly weakened drivers seat (7.1.2 (b) (ii)) | 1 |
| Seat belt likely to become detached in the event of a collision 1st row - 2 seats next to window insecure (7.1.1 (a) (ii)) | 1 |
| Seat belt likely to become detached in the event of a collision 3rd row - inner 2 seats and outer seat insecure (7.1.1 (a) (ii)) | 1 |
| Seat belt retracting mechanism defective 1st row - 3rd seat (7.1.2 (e)) | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
| Nearside Front Steering locking device missing |2.2.C.1f| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` PHONE HOLDER GLUED TO SCREEN |8.3.1e| | 1 |
| Central Rear passenger door cannot be opened from outside the vehicle back doors. |6.2.B.1c| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle this door has no handle. |6.2.B.1c| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30 cm rear spring front eye |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cm rear spring front eye |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm rear spring rear eye |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cm rear spring rear eye |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cm rear spring front eye |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cm rear spring front eye |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Leaf spring anchor pin or bush excessively worn front eye |5.3.4 |a| |i|| | 1 |
| Offside Rear Lower Leaf spring shackle pin or bush excessively worn rear lower bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock absorber in two places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassic leg under bonnet |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassic leg at inner arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassic leg under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassic leg at inner arch |2.4.A.3| | 1 |
| Offside Rear Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Rear Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings small hole at old repair |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings behind spring |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bulk head next to wishbone mount |best seen from underside| |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded at outer sill area |5.2.6| | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened been rubbing on wheel rim |3.5.1b| | 1 |
| Offside Front Wheel nut|s| loose X 5 |4.2.A.1e| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/top shock absorber mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed x2 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded engine mounting area fractured. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger front bracket area holed x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger area front bracket x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger area rear bracket area x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger mounting rear bracket area x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded closing panel area |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member area |6.6.6| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmembor |6.1.B.2| | 1 |
| Offside Outer Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 1 |
| Offside Front Statutory seat belt of the wrong type. |5.1.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Offside Rear Seat belt flexible stalk excessively deteriorated |5.1.B.5a| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced innersill /step |7.1.1 |a| |i|| | 1 |
| Nearside Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Upper Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Exhaust system not adequately supported silencer out skin adrift and fouling propshaft |7.1.1| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to offside front lower arm rear bush |6.2.2 |d| |i|| | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting central body mountain point |6.2.2 |d| |i|| | 1 |
| Nearside Front Headlamp aim not tested bulb inoperative |4.1.2 |b|| | 1 |
| Nearside Obligatory indirect vision device insecure wing mirror |3.3 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of rear wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chASSIS by bumpstop |2.4.A.3| | 1 |
| Nearside Front Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting weld cracked |2.4.G.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front chassi engine bay |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front chassi front inner arches |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner arches/floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear quarter closing panel |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering several areas |6.1.A.1| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis legs & Wheel arch turret Both sides |6.1.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded Rear chassis legs |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Outer Sills |2.4.A.3| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill corner |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sil |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Radius arm ball joint dust cover missing |2.4.G.2| | 1 |
| Offside Front Radius arm ball joint dust cover missing |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D-Link bush |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush nut loose/worn |2.4.G.2| | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a pin/bush nut loose/worn |2.4.G.2| | 1 |
| Centre Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Offside Rear Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Rear Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
| Nearside Rear Direction indicator obviously incorrectly positioned |1.4.A.2b| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Leaf spring to axle fixing bolt insecure both front and rear fixing bolts (5.3.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength both areas marked with wax chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength area marked with wax chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/ step |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill insufficent repair |7.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis cracked behind cab |6.1.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis cracked |6.1.1 |a| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis holed in various places |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis holed in various places |6.2.2 |d| |ii|| | 1 |
| Nearside Outline marker lamp not working both |4.2.1 |a|| | 1 |
| Offside Outline marker lamp not working both |4.2.1 |a|| | 1 |
| Offside Rear Position lamp lens seriously defective missing |4.2.1 |b|| | 1 |
| Driver`s seat with a defective structure excessively corroded behind seat |6.2.5 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above subframe |6.1.1 |c| |i|| | 1 |
| Offside Rear Hydraulic fluid leaking excessively |8.4.1 |a| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above subframe |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced above subframe |6.1.1 |a| |i|| | 1 |
| Brake performance not tested due to fluid leak and front brake disc excessively worn |1.2.1 |g|| | 1 |
| Centre Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring outrigger |front| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring outrigger |rear| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring mounting |rear| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor at top shock absorber mounting |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded turret at inner wheel arch holed |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat base assembly along the front |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and rear cross member areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at inner wheel arch area |2.4.A.3| | 1 |
| Windscreen damaged and affecting the drivers view of the road cracked (3.2 (a) (ii)) | 1 |
| Offside Rear Service brake lagging in operation uneven application (1.2.1 (d)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg /engine mounting |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill /step |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill/step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring /rear crossmember |2.4.A.3| | 1 |
| Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Hazard warning lamps inoperative all nearside lights |1.4.B.1b| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassis leg to floor |2.4.A.3| | 1 |
| Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength Top of OSF chassis (5.3.6 (a) (i)) | 1 |
| Rear Electrical wiring deteriorated and bare wires exposed tow bar electrics |1.9.2c| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Nearside Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides outer sill |6.1.B.2| | 1 |
| Offside Front Direction indicators have a product on the light sources so they are not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Nearside front inner wing area around shock absorber top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Front crossmember corroded within 30cm of offside front suspension arm mount |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis corroded withing 30cm os shock absorber mounting |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached nut loose (5.3.3 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage insecurely attached nut loose (5.3.3 (a) (i)) | 1 |
| Front Fuel tank insecure TANK STRAP (6.1.3 (a) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting WING HOLED IN 2 PLACES (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting WING HOLED IN 2 PLACES (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting CAB HOLED (6.2.2 (d) (i)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting CAB HOLED (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i)) | 1 |
| Windscreen in an unacceptable condition several cracks |3.2 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step to sill |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and cab corner |6.2.2 |d| |i|| | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Position lamp not working all off |4.2.1 |a|| | 1 |
| Offside Rear fog lamp likely to become detached |4.5.1 |c| |ii|| | 1 |
| Hydraulic fluid leaking excessively steering rack |8.4.1 |a| |i|| | 1 |
| Rear Direction indicator light intensity significantly reduced both (4.4.3 (a)) | 1 |
| Rear Position lamp light intensity significantly reduced both (4.2.3 (a) (ii)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under csill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area holed (5.3.6 (a) (i)) | 1 |
| Rear Parking brake inoperative on one side both reading low (1.4.1 (a)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded both inner sills inner door step areas |5.2.6| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release stalk |5.2.5a| | 1 |
| Nearside Front Side repeater flashing more than 120 times a minute all nearside indicators |1.4.A.2g| | 1 |
| Exhaust has a major leak of exhaust gases backbox |7.1.2| | 1 |
| Centre Brake pipe inadequately supported both pipes |3.6.B.1| | 1 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D BUSH |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D BUSH |2.4.G.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded STILL STEP |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded SILL STEP |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FLOOR |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front Mounting Point. (5.3.6 (a) (i)) | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp with indicator. |1.1.A.3f| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded seal. |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is severely distorted seal. |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded seal/step. |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & outridger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & outridger (5.3.6 (a) (i)) | 1 |
| Brake pedal anti-slip provision incomplete worn through on right hand side |3.3.A.1b| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting end of the rear cross member |6.6.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area to the floor pan within 30cm of a shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member has corroded away |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corrosion to the short out rigger by the wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded corrosion to the short out rigger near the spring hanger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep at |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis at |2.4.A.3| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at |3.1.9| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember at |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at |2.4.A.3| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering within 30cm of brake servo (chassis leg) (6.1.1 (c) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (within 30cm of passenger seat mounting) (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (within 30cm of drivers seat mounting) (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm of subframe mount (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm of subframe mount (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member within 30cm of prop mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member within 30cm of rear spring mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member within 30cm of rear spring mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member within 30cm of antiroll bar link arm mount (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner and outer sills (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced all 4 cross members (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front inner wings (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount outrig/hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount outrig/hanger and outer panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leafspring front mount outrig/hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch/floor excessively corroded/detached |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger in a couple of areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area in a couple of places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 1 |
| Nearside Inner Front Lower Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| front brakes release unevenly 67% |3.7.B.4| | 1 |
| Nearside Rear Lower passenger door hinge insecure |6.2.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat mount |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear spring mount |2.4.A.3| | 1 |
| Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner / outer sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner / outer sill |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner / outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded body / chassis |2.4.A.3| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` both |8.3.1b| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under-Seal Corrosion and Holes |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front and Rear Corrosion and Holes |6.1.B.2| | 1 |
| Headlamp aim beam image obviously incorrect bulb fitted incorrectly |1.8.A.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step |5.3.6 |a| |i|| | 1 |
| Offside Front Ball joint has excessive play track arm |2.2.B.1f| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill by step |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in front of rear arch |6.1.B.2| | 1 |
| Offside Anti-roll bar damaged and seriously weakened snapped (5.3.3 (b) (i)) | 1 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened rear bracket mount (5.3.1 (b) (i)) | 1 |
| Offside Front Macpherson strut mounting corroded and seriously weakened inner chassis (5.3.3 (b) (i)) | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement cross member area excessively corroded (6.1.8 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (hole) (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack joint (2.3 (a) (i)) | 1 |
| Nearside Front Windscreen wiper blade missing |3.4 |b| |ii|| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section |6.1.B.2| | 1 |
| Brake pipe inadequately supported ALL brake pipes |3.6.B.1| | 1 |
| Nearside Rear Direction indicator incorrect colour light lens broke |1.4.A.2f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at front of leaf spring mounting |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings X 4 different places |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings X 3 different places |6.1.B.2| | 1 |
| front brake recording little or no effort PIPE SPLIT SO BRAKES NOT TESTED!! |3.7.B.5a| | 1 |
| Prop shaft bearing housing likely to fail both (6.1.7 (f) (ii)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several areas, inner wheel arch, spring mount inner sill etc | marked | |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several areas inner sill , wheel arch , inner sill etc | marked | |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/sill |6.2.2 |d| |i|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body |6.1.B.2| | 1 |
| Headlamp levelling device cannot be operated from the drivers seat both front lights (4.1.5 (b)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced cracked marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint and dust cover |2.5.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded forward |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded forward |2.4.A.3| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb in wrong |4.1.2 |c|| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced Inner wing. (6.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D Bush. (5.3.4 (a) (i)) | 1 |
| Brake cable insecure (1.1.15 (c)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner wing (6.1.1 (c) (i)) | 1 |
| Offside Side repeater incorrect colour lens missing |1.4.A.2f| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system on joint under wheel arch (1.1.11 (b) (ii)) | 1 |
| Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment nuts left loose on arm (2.1.3 (b) (ii)) | 1 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment nuts left loose on arm (2.1.3 (b) (ii)) | 1 |
| Brake pedal anti-slip provision worn smooth pedal rubber (1.1.2 (c)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step.. |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner bulkhead? |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner valance |5.3.6 |a| |i|| | 1 |
| Front Direction indicators not in good working order |function impaired| |1.5.A1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded cab step |5.2.6| | 1 |
| Fuel tank insecure front mounting broken |7.2.1| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp Indicator interacting with other lamps |1.4.A.2h| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp O/S Stop Lamp interacting with other lamps |1.2.1f| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Front O/S chassis inner leg corroded above subframe mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded N/S/R Inner sill corroded within 30cm of front spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded N/S/R Wheel arch corroded within 30cm of rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded N/S/R Chassis corroded within 30cm of rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded O/S/R Inner sill corroded behind wheel within 30cm of rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded O/S/R Wheel arch corroded within 30cm of rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Rear Chassis corroded within 30cm of tow bar mounting |6.6.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill corroded. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis corroded. As marked. |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both spring mount area |5.3.6 |a| |i|| | 1 |
| Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |2.1.2 |e| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength MOUNTING AREAS FRONT AND REAR CORRODED TO EXCESS (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength SPRING MOUNTINGS FRONT AND REAR AREAS CORRODED TO EXCESS (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s + o/s outer sills + o/s + n/s inner sills + n/s/r valance + rear chassis |6.1.B.2| | 1 |
| All position lamps not working All marker lights |1.1.A.3b| | 1 |
| Body insecure and dangerous to other road users Front bumper insecure |6.1.B.1b| | 1 |
| Brake servo inoperative |1.1.10 |a| |ii|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Nearside Front Wheel bearing play so excessive it is likely to break up rough |5.1.3 |a| |ii|| | 1 |
| Service brake effort inadequate at a wheel all wheels |1.2.1 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / outrigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by brake valve |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired centre outer sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg |load sensing valve| |3.3.A.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r chassis by shock absorber top mount |2.4.A.3| | 1 |
| Nearside Rear brake drum excessively pitted |3.5.1h| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step underneath |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step / sill underneath |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step / sill underneath |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner quarter underneath |2.4.A.3| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect beam set to low |1.8.A.1b| | 1 |
| Centre Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner section of cab step |5.2.6| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings back out rigger / inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step/ inner sill joint not welded |6.1.B.2| | 1 |
| Suspension arm ball joint dust cover no longer prevents the ingress of dirt both front |5.3.4 |b| |ii|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front wheel arches |6.2.2 |d| |i|| | 1 |
| Offside Front Brake pipe inadequately clipped marked |3.6.B.1| | 1 |
| Offside Power steering pipe|s| or hose|s| excessively corroded at steering rack.marked. |2.3.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced arch/step arear |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - step area |7.1.1 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength entire inner & outer sills |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength entire inner & outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mount |2.4.A.3| | 1 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc Outer |2.5.C.1a| | 1 |
| Reversing lamp does not emit a steady white light (4.6.2 (a)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis/cross member |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |5.3.6 |a| |ii|| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill x 2 |6.1.1 |c| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring anchor bracket and surrounding |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has damage which adversely affects braking or steering chassis behind the wheel |6.1.A.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring mount chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear spring mount chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring mount chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis shock mount |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Engine mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch top of shock mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch chassis |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step inner seal |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner seal |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Load valve |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded STEP AREA |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER AND OUTER SILL AREA |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INN ER AND OUTER SILL AREA |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CROSS MEMBER |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by corrosion B post |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion tipper body side |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength inner step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded first cross member |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both |centre marked yellow| chassis rails |6.1.B.2| | 1 |
| Engine mounting excessively loose GEAR BOX MOUNTINGS X2 BROKEN |6.1.8 |a| |ii|| | 1 |
| Front Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 1 |
| Steering retaining device insecure Sterling lock faulty |2.2.C.1g| | 1 |
| Centre Upper Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Body has a sharp edge caused by corrosion nearside tipper body bar |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above propshaft next to fuel tank |6.1.B.2| | 1 |
| Centre Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Rear Braking system leaking back plate |3.6.A.1| | 1 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength inner wing under bonnet |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch suspension mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced door step area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step in several places (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill in several places (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep |7.1.1 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush snapped |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner & outer sill where marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner & outer sill where marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis where marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis where marked |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch where marked |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch where marked |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step where marked |5.2.6| | 1 |
| Nearside Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced seal steap area (6.1.1 (c) (i)) | 1 |
| Rear Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Outer Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside and nearside front steps |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and floor rear of wheel |2.4.A.3| | 1 |
| Front Subframe mounting prescribed area is excessively corroded x-member offside and nearside |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body spars |6.1.B.2| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp affected when side lights are on |1.2.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill near front spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill near rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch near rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill near rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch near rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened snapped |2.4.G.1| | 1 |
| Electrical wiring insecure engine bay |1.9.2a| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x4 |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shock absorber mt area |2.4.A.3| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative Clearly Seized |1.1.17 |c| |ii|| | 1 |
| Suspension arm pin or bush excessively worn Front Both Sides |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill
|2.4.A.3| | 1 |
| Nearside Rear Towbar component excessively corroded spring hanger mounting area |6.6.1| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded spring hanger out rigger, rear spring rear hanger |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded offside & nearside main chassis, bump stop arears,inner side of chassis |2.4.A.3| | 1 |
| Fuel pipe union leaking at filter |6.1.3 |b| |i|| | 1 |
| Offside Brake pipe leaking at flex hose |3.6.A.1| | 1 |
| Fuel tank so insecure there is a risk of fire fuel tank strap broken off and fuel tank is hanging down |6.1.3 |a| |ii|| | 1 |
| Fuel tank insecure fuel tank hanging down |6.1.3 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Large hole in outer sill area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected CHALKED (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected INNER SILL AND STEP. CHALKED (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected INNER SILL, INNER STEP AND CHASSIS RAIL. CHALKED (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected OUTER STEP (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected OUTER STEP (5.3.6 (a) (ii)) | 1 |
| Rear Service brake effort inadequate at a wheel BOTH SIDES (1.2.1 (a) (i)) | 1 |
| Offside Front Windscreen damaged and affecting the drivers view of the road CRACKED (3.2 (a) (ii)) | 1 |
| Nearside Front Obligatory mirror seriously obscured affecting the rear view glass damaged |8.1.2a| | 1 |
| Offside Brake cable insecure fouling road wheel |3.5.1d| | 1 |
| Nearside Brake cable insecure fouling brake pipe |3.5.1d| | 1 |
| Nearside Front Body insecure and dangerous to other road users windscreen trim |6.1.B.1b| | 1 |
| Offside Front Body insecure and dangerous to other road users windscreen trim |6.1.B.1b| | 1 |
| Exhaust has a major leak of exhaust gases silencer boxes |7.1.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember corroded |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember corroded |6.1.B.2| | 1 |
| Rear Rear reflector defective or damaged by more than 50% of the reflecting surface both |4.8.1 |a| |ii|| | 1 |
| Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Sub-frame insecurely attached rear bolt loose |5.3.3 |a| |i|| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded Around brake mounting |3.1.9| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Around spring hanger mounting |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 0.75 limit |8.2.2.2 |a|| | 1 |
| Offside Cab steps so insecure it is likely to cause injury corroded |6.2.8 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Floor in such a condition it is likely to cause load insecurity or instability |6.2.4 |a| |ii|| | 1 |
| Offside Rear Floor in such a condition it is likely to cause load insecurity or instability |6.2.4 |a| |ii|| | 1 |
| Offside Rear Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Body has a sharp edge caused by corrosion bed by side loading door |6.1.C.1| | 1 |
| Offside Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage cracked |2.4.G.1| | 1 |
| Offside Front Leaf spring cracked |2.4.B.1a| | 1 |
| Offside Front Anti-roll bar linkage which is adjustable, locking device missing |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top chassis section. |6.1.A.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail x3 places |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail x2 places |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 places |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side step lower |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded side step |5.2.6| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` sat nav holder & fan |8.3.1b| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| column top bearing |2.2.A.1b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect no beam pattern lens cover opaque |1.8.A.1b| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under the bonnet body has hole |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside body has hole |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch has hole front and rear |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has hole |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has hole inside and outside |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body has holes |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has hole |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body has holes |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has holes |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body has holes |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has hole inner and outer |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has hole |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch has holes |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has hole |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside body has holes |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward spring shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearward spring shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded main chassis rail over axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded main chassis rail over axle |2.4.A.3| | 1 |
| Emissions not tested unable to open bonnet |7.4.B.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring hanger to out rigger |6.1.B.2| | 1 |
| Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Electrical wiring insulation so damaged or deteriorated it is likely to cause a short-circuit under bonnet (4.11 (c) (ii)) | 1 |
| Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Front Direction indicator not working when hazrads on (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working when hazards on (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working when hazards on (4.4.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working and rear |4.2.1 |a|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember in front of offside rear spring (6.1.1 (c) (i)) | 1 |
| Nearside Rear Braking system leaking axel leaking |3.6.A.1| | 1 |
| Nearside Rear Oil leaking excessively from transmission axle leeking onto brake (8.4.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r chassis corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Floor excessively deteriorated door step corroded |6.2.4 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Rear Floor excessively deteriorated o/s/r wheel arch |6.2.4 |a| |i|| | 1 |
| Speedometer not fitted (7.8 (a)) | 1 |
| Nearside Front Seat belt buckle not functioning as intended Sticks in the locked position (7.1.2 (d)) | 1 |
| Offside Rear Seat belt buckle not functioning as intended Not working (7.1.2 (d)) | 1 |
| Offside Track rod end ball joint has excessive play And boot split (2.1.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under turret |2.4.A.3| | 1 |
| Offside Rear Brake pipe inadequately clipped on axle |3.6.B.1| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired 0uter door step (6.2.2 (d) (ii)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 1 |
| Front Lower Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported mount broken |7.1.1| | 1 |
| Offside Rear fog lamp not working Obligatory |1.3.2b| | 1 |
| Nearside Outer Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Rear Inner Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Nearside Rear Outer Leaf spring anchor bracket corroded and seriously weakened sill |2.4.B.6d| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded lower cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear Corner |2.4.A.3| | 1 |
| Brake load sensing valve linkage defective and function impaired lever seized |1.1.17 |a|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded 2x places |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported tail pipe and its bent |7.1.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch area |6.1.A.1| | 1 |
| Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step areas both sides |6.1.A.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded sill areas both sides |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded several areas both sides |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Brake pipe excessively damaged across rear axle |1.1.11 |c|| | 1 |
| Nearside Outer Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember (6.1.6 (i) (i)) | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired crossmember (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush. |2.4.G.2| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear Both side wheel arch and BACK PILFER CORDED (6.2.2 (d) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both wheel arch corroded inside (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides complete |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis rail corroded and holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis rail corroded and holed |6.1.B.2| | 1 |
| Nearside Track rod end has had excessive heat applied |2.2.C.1e| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded passenger seat floor |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch
|6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill /door step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis/door step |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x3 |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x1 |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x1 |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside out rigger |6.1.B.2| | 1 |
| Nearside Front Inner Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced chassis |6.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger (7.1.1 (a) (i)) | 1 |
| Offside Leaf spring saddle is fractured |5.3.1 |b| |i|| | 1 |
| Offside Front Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Nearside Rear Suspension rod insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Rear Outline marker lamp not working below tailgate (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Outline marker lamp showing white light to the rear below tailgate (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Suspension rod missing (5.3.3 (a) (ii)) | 1 |
| Rear Floor excessively deteriorated body (6.2.4 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing below headlamp |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings below headlamp |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/ inner sill |6.1.B.2| | 1 |
| Fuel tank insecure Both straps corroded |6.1.3 |a| |i|| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
| Rear Leaf spring shackle pin or bush excessively worn Rear bush (5.3.4 (a) (i)) | 1 |
| Brake valve leaking Load valve |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of cab back panel excesively holed and corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Loading door cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Nearside Front Loading door cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DRIVERS STEP - UNDERSIDE |6.1.B.2| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside and offside inner arch/floor |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded out rigger in front of rear wheel |2.4.A.3| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system brake pipe burst during roller brake test (1.1.11 (b) (ii)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced inner seel (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced inner seel (6.1.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure is fractured and structural rigidity is significantly reduced seel (6.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in engine bay under brake servo |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 1 |
| Front Anti-roll bar fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail under seat mount |7.1.1 |a| |i|| | 1 |
| Body has a sharp edge caused by corrosion rear step |6.1.C.1| | 1 |
| Offside Rear Upper Brake valve corroded and excessively weakened |3.6.A.2b| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind spare wheel (6.1.1 (c) (i)) | 1 |
| Nearside Rear Loading door likely to open inadvertently or not remain closed (6.2.3 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Offside Front engine mounting bracket insecure and likely to fail chassis corroded |6.1.D.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill to side pannel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill to arch |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill/step under plastic |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill/step under plastic |5.2.6| | 1 |
| Nearside Fuel tank insecure at chassis through corrosion |7.2.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill to inner chassis panel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to chassis panel at front of arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to chassis panel at rear of arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to chassis at front of arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to chassis at rear of arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower back panel to chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded lower back panel to chassis |2.4.A.3| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded lower back panel |2.4.A.3| | 1 |
| Nearside Emergency exit sign missing (9.1.2 (b) (ii)) | 1 |
| Rear Emergency exit sign missing (9.1.2 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 1 |
| Nearside Inner Subframe mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |front| mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |rear|mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |rear| mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (inside wheel arch) (5.3.6 (a) (i)) | 1 |
| Centre Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Rear Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. corroded through surface |6.1.E.1| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis 2 places as marked (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis as marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Leaf spring anchor bracket inappropriately repaired front mount |2.4.A.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded main chassis leg and under bonnet adjacent to bulk head |2.4.A.3| | 1 |
| Offside Front Front position lamp|s| not working parking |1.1.A.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in engine bay bulk head |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is severely distorted o/s n/s rear leaf springs mounts |2.4.A.3| | 1 |
| Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement o/s n/s |2.4.G.2| | 1 |
| Front front brake binding o/s n/s |3.7.B.1| | 1 |
| Offside Rear Stop lamp not working Works Intermittently |1.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis Cross Member By N/S Front Spring Hanger |2.4.A.3| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Cracked Both Sides Just Behind The Cab |6.1.B.2| | 1 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Cracked Both Sides Behind The Cab |6.1.B.2| | 1 |
| Seat belt stitching badly frayed drivers seat belt |5.2.2b| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Lower Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Fuel tank insecure straps x2 corroded (6.1.3 (a) (i)) | 1 |
| Offside Front Body has a projection caused by damage Bumper Insecure |6.1.C.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb loose |1.8.A.1b| | 1 |
| Nearside Front Lower Radius arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Lower Radius arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rusty |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion centre vehicle body |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion centre vehicle body |6.1.C.1| | 1 |
| Brake load sensing valve linkage obviously incorrectly adjusted missing (1.1.17 (b)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and out rigger (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis arm (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury corroded (6.2.8 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded BOTH leaf spring mounting points in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded BOTH leafspring mounting points in various places |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Chassis near fuel tank |5.2.6| | 1 |
| engine mounting deteriorated resulting in excessive movement Radiator and Intercooler support mount corroded and could result in items falling off vehicle |6.1.D.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near shock absorber mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mount (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x10 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x7 |5.3.6 |a| |i|| | 1 |
| Stop lamp|s| switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Nearside Front Steering arm has relative movement at its fixings inner rack end |2.2.B.1h| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind bumper as indicated |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind bumper as indicated |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill and step area |2.4.A.3| | 1 |
| Nearside Front Service brake lagging in operation slow at application and releasing (1.2.1 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind coolant bottle (5.3.6 (a) (i)) | 1 |
| Nearside Front Steering locking device ineffective track rod end lock nut loose (2.1.3 (d)) | 1 |
| Power steering pipe|s| or hose|s| leaking underneath next to rack |2.3.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill corroded and damaged |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill corroded and covered with tape |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded middle outer sill next to door and fuel flap |5.2.6| | 1 |
| front brake binding unable to test front brakes in rollers |3.7.B.1| | 1 |
| Subframe mounting prescribed area is excessively corroded offside front chassis leg corroded and holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear chassis holed next to rear leaf spring shackle |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear chassis holed next to rear leaf spring shackle in two places |2.4.A.3| | 1 |
| Brake pedal has insufficient reserve movement pedal hard possible due to brakes binding |3.3.A.5| | 1 |
| front parking brake recording little or no effort offside and nearside front |3.7.B.6a| | 1 |
| Nearside Front Direction indicator obviously incorrectly positioned |1.4.A.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER ARCH SHOCK ABSORBER |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to front leaf mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to rear leaf mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to front leaf mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step to rear suspension arm mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf mount |5.3.6 |a| |i|| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting rear cross member / bumper area |6.1.6 |i| |i|| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting CROSS MEMBER |6.6.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL/STEP |5.2.6| | 1 |
| Nearside Lower Direction indicators not working |1.4.A.2c| | 1 |
| Anti-roll bar pin or bush excessively worn Both front (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.6.5| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.6.5| | 1 |
| Nearside Rear Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Rear Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Brake performance not tested not recorded rear brake dangerous (1.2.1 (g)) | 1 |
| Offside Front Driver`s seat insecure pivot mount |6.2.A.1| | 1 |
| Nearside Rear Body insecure and dangerous to other road users loose bolt |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users loose bolt |6.1.B.1b| | 1 |
| Brake performance not tested no reading park brake. too little effort o/s/r service brakefor imbalance |3.7.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at leaf spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at leaf spring rear mount several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at leaf spring rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at shocker mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded at leaf spring front mount |2.4.A.3| | 1 |
| Rear Rear reflector missing both |1.5.1a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s inner and outer sills |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement `d` bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement `d` bush |2.4.G.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear outriggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear outriggers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp Bad earth |1.1.A.3f| | 1 |
| Nearside Outer Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Outer Front passenger seat insecure |6.2.3| | 1 |
| front brakes release unevenly n/s slow |3.7.B.4| | 1 |
| Exhaust system not adequately supported rear hanger corroded off |7.1.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded quarter panal |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis areas |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases down pipe |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded bimp stop |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering x3 |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing/floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing near to strut mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing near to strut mounting |2.4.A.3| | 1 |
| Nearside Rear All outline marker lamps not working |4.2.1 |a| |ii|| | 1 |
| Rear Prop shaft bearing excessively worn rear one of two |6.1.7 |b| |i|| | 1 |
| Front Body component corroded and likely to cause injury rear step corroded excessivley |6.2.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step inner and outer |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step inner and outer |5.2.6| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings x5 |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
| Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Centre Front Upper Drive shaft uj which forms part of the suspension has a missing flange bolt |2.4.G.4c| | 1 |
| Nearside Rear Leaf spring seriously weakened both eyes (5.3.1 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front leaf eye (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at strut tower (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded b post |5.2.6| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing x3 |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wingx2 |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded step x2 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured step |2.4.A.3| | 1 |
| Nearside Rear Leaf spring splayed and fouling Floor |2.4.B.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and surrounding area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis, cracked and bent plus holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and surrounding area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch and floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill panel |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner of chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill-step |5.2.6| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded strut top mount area |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired step/inner sill |5.2.6| | 1 |
| Nearside Headlamp levelling device cannot be operated from the driver`s seat |4.1.5 |b|| | 1 |
| Offside Headlamp levelling device cannot be operated from the driver`s seat |4.1.5 |b|| | 1 |
| Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Nearside Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure at various points along innersill |9.2.9| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leafspring mounting prescribed area |2.4.A.3| | 1 |
| Offside Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure
along outer sill corroded at various parts |9.2.9| | 1 |
| Offside Rear wheel cylinder securing device excessively deteriorated |3.5.1j| | 1 |
| Offside Rear Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings Sill corroded and holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step |6.1.B.2| | 1 |
| Offside Inner Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Centre Electrical wiring damaged and bare wires exposed |1.9.2c| | 1 |
| Hazard warning lamps inoperative bad earth |1.4.B.1b| | 1 |
| Brake pipe inadequately clipped chassis area |3.6.B.1| | 1 |
| Nearside Direction indicator not working wing |1.4.A.2c| | 1 |
| Nearside Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached bolt loose |5.3.3 |a| |i|| | 1 |
| Nearside Front Fluid leak harmful to the environment or a risk to other road users engine coolant leaking |8.4.1 |a| |i|| | 1 |
| Nearside Fuel tank insecure front strap broken |6.1.3 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch /strut top mount area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch strut top mount area |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers x2 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers x2 |6.1.B.2| | 1 |
| Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills rea ones both sides |6.1.B.2| | 1 |
| Nearside Obligatory mirror does not provide a view to the rear |6.6.1c| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced silll |7.1.1 |a| |i|| | 1 |
| Nearside Outer Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Bonded suspension unit attachment fractured |2.4.F.1b| | 1 |
| Emissions not tested excessive black smoke, likely to damage smoke machine |8.2.2.2 |e|| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings several patches |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings several patches |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 5 patches |6.1.B.2| | 1 |
| Offside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Headlamp reflector seriously defective headlamp reflector loose (4.1.1 (b) (ii)) | 1 |
| Offside Front Headlamp insecure internals / affecting beam image (4.1.1 (c)) | 1 |
| Speedometer clearly inoperative erratic with engine speed (7.8 (b) (ii)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill / step area (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to step area (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to step area (7.1.1 (a) (i)) | 1 |
| Nearside Front Fluid leak harmful to the environment or a risk to other road users washer tank (8.4.1 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / strut area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rusted and holed |6.1.B.2| | 1 |
| Nearside Rear Lower Tie bar/rod attachment bracket/mounting insecure link pinch bolt |2.4.G.1| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear weishbone bush |2.4.G.2| | 1 |
| Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BODY MUDGUARD |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded BY SUBFRAME |2.4.A.3| | 1 |
| passenger door cannot be opened from outside the vehicle BONNNET WONT OPEN |6.2.B.1c| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill in front and behind wheel x4 holes |2.4.A.3| | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner & outer door sill |2.4.A.3| | 1 |
| Rear Outer Suspension spring mounting prescribed area is excessively corroded outer riggers o/s & n/s |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to back panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis to rear panel |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing around suspension turret (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg bottom & side (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Body has a sharp edge caused by corrosion nearside front |6.1.C.1| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step area on the outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step area on inner and outer sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting front inner wheel wing area (6.2.2 (d) (i)) | 1 |
| Rear Prop shaft bearing housing likely to fail rubber c bush broken up the rear one of the two (6.1.7 (f) (ii)) | 1 |
| Rear Exhaust system not adequately supported mounting bracket corroded and broken. |7.1.1| | 1 |
| Nearside Front Semaphore indicator tell tale not working correctly |1.4.C.2| | 1 |
| Brake load sensing valve defective and function impaired leaking |3.6.E.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |behind cab| x2 holes |3.1.9| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine too dirty for print out |7.4.B.3b| | 1 |
| Offside Rear Body panel likely to become detached wheel arch mudguard missing and insecure (6.2.1 (a) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |engine mounting| |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Nearside Stop lamp has less than 50% of the light sources illuminating bulb incorrectly fitted |1.2.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis top |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to chassis (6.2.2 (d) (i)) | 1 |
| Nearside Front Brake pipe inadequately clipped round back of engine |3.6.B.1| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded body sill filler |5.2.6| | 1 |
| Nearside Front Front suspension has excessive play in a track control arm inner bush bush split |2.5.B.2b| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush d bar bush |2.4.G.2| | 1 |
| Suspension arm pin or bush excessively worn both front arm rear bushes |5.3.4 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill at |5.2.6| | 1 |
| Body has a sharp edge caused by damage tailgate |6.1.C.1| | 1 |
| Brake load sensing valve defective and function impaired spring missing |3.6.E.3| | 1 |
| Offside Rear Leaf spring anchor bracket loose u bolts. |2.4.B.6a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step within 30cm of seat mount |5.2.6| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement ARB D bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement ARB D bush |2.4.G.2| | 1 |
| Speedometer clearly inoperative speed on speedo increases with engine revs |not in gear etc| |6.7.2| | 1 |
| Front position lamp|s| not working both front roof lights |1.1.A.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s cab step/inner sill corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s inner sill corroded through |6.1.B.2| | 1 |
| Brake pipe leaking all front |3.6.A.1| | 1 |
| Front Vehicle structure is fractured and structural rigidity is significantly reduced cross member panel N/s and O/s (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced outer rigger (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner wing to front panel and wing (behind headlamp) (6.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under cab to floor (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under seat area (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis centre support brk corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Anti roll bar link brk to chassis creaked though (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis riggerabout fuel tank outer (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner rigger about fuel tank (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (front of rear spring) inner and outer of chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring (Front) hold inner and outer (5.3.6 (a) (ii)) | 1 |
| Centre Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis above fuel tank |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill to inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch inner |2.4.A.3| | 1 |
| Offside Vehicle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor behind cab |5.2.6| | 1 |
| Offside Front position lamp|s| not working roof lamp marker |1.1.A.3b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision floor (7.1.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision floor (7.1.1 (a) (ii)) | 1 |
| Nearside Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing area |5.3.6 |a| |i|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sills |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sills |6.1.A.1| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings MIDDLE |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings MIDDLE |6.1.B.2| | 1 |
| Rear Body has a projection caused by corrosion INNERWING |6.1.C.1| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill/Step |marked with chalk| |5.2.6| | 1 |
| Emissions not tested Due too exhaust leak |7.4.B.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill at front leaf eye (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at front leaf eye (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front top chassis leg holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside inner sill x 2 |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear innersill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front inner siil |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front outer sill holed |2.4.A.3| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor step holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner to outer sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner to outer sill holed x3 (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to inner wing holed (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to inner wing holed (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch inner corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis by brake flexi hose |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Next to leaf spring |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Sill x 1 place |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Underarch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger / area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger / area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Outrigger / area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Outrigger / area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill to inner sill area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill to inner sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis section |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis section |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear off leaf spring |6.1.B.2| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis (brake compensator) (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (n/s/r shock) (5.3.6 (a) (i)) | 1 |
| Nearside Inner Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner flitch corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner flitch and outer rear sill corroded |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is severely distorted nearside rear and offside rear shock absorber upper mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear off leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Front Upper Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Offside Rear All position lamps have a product on the lenses so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Centre Rear Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear mount |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis |6.6.6| | 1 |
| Seat belt anchorage prescribed area is fractured n/s+o/s front inner and outer sills |5.2.6| | 1 |
| Suspension component mounting prescribed area is fractured o/s/f crossmember+both front inner arches |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is fractured o/s/r chassis+rear spring mounts +rear crossmember+n/s/r sill |2.4.A.3| | 1 |
| Engine mounting bracket missing rear |6.1.8 |a| |ii|| | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg. Corroded on top and to side |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded rear quarter |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear mounting |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear mounting |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross brace |2.4.A.3| | 1 |
| Central Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Upper Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Centre Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured lower shock mounting |2.4.A.3| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded centre of chassis load sensing valve |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring eye |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre of chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper spring mounting and inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting inner and outer chassis |5.3.6 |a| |i|| | 1 |
| Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Tailgate component insecure (6.2.1 (a) (i)) | 1 |
| Towbar fractured seriously affecting its strength within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg / outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (marked) (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (marked) (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Centre Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Lower Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting point |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top of chassis |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top of chassis |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering side of chassis through wheel arch |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near shocker |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Within 30cm oh strut mounting |6.1.B.2| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis member next to spare wheel cable mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under front wheel arch |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above axle corroded insufficient repair |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis below axle corroded to excess |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis at spring hanger |rear| insufficient repair |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis at rear spring hanger insufficient repair |6.1.A.1| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp working with brake lamps |1.1.A.3f| | 1 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear spring eye bush |2.4.B.2| | 1 |
| Nearside Rear Leaf spring to axle securing bolt insecure u bolts |2.4.B.7b| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure u bolts |2.4.B.7b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion at front of wheel arch |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at rear cross member |2.4.A.3| | 1 |
| Nearside Front Lower Front suspension retaining device ineffective |2.5.A.4| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint also split cover |2.4.G.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis excessively corroded on o/s/r near bump stop area |6.1.B.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear chassis, inner sill, rear crossmember, off side step, rear wheel arch (6.2.2 (d) (i)) | 1 |
| Front Position lamp not working Both front side lights (4.2.1 (a) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill corroded marked up (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting end of chassis rails corroded marked up (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Chassis (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is fractured door pillar |5.2.6| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by damage mirror casing |6.1.C.1| | 1 |
| Prop shaft bearing excessively worn 2nd centre bearing |6.1.7 |b| |i|| | 1 |
| Nearside Front Brake disc insecure bolt missing and other bolts loose |1.1.14 |a| |ii|| | 1 |
| Nearside Front Anti-lock braking system component missing abs ring missing |3.4.2| | 1 |
| Exhaust has a major leak of exhaust gases tail pipe missing |7.1.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Nearside Front Direction indicator missing side (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator missing side (4.4.1 (a) (ii)) | 1 |
| Central Prop shaft bearing excessively worn 2nd centre bearing (6.1.7 (b) (i)) | 1 |
| Offside Body mounting fixings missing 2 x bolts missing (6.2.2 (c) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid crossmember |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid cross member |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced subframe mounting |6.1.1 |c| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both `d` bushes |5.3.4 |a| |i|| | 1 |
| Rear Upper Outline marker lamp lens seriously defective both |4.2.1 |b|| | 1 |
| Rear Upper Outline marker lamp not working both |4.2.1 |a|| | 1 |
| Nearside Front Outline marker lamp not working |built in indicator| |4.2.1 |a|| | 1 |
| Nearside Rear Upper Leaf spring shackle pin or bush excessively worn shackle bush worn badly (5.3.4 (a) (i)) | 1 |
| Offside Rear Upper Leaf spring shackle pin or bush excessively worn shackle bush worn badly (5.3.4 (a) (i)) | 1 |
| Position lamp likely to become detached rear lamp mounting plate cross member weak and insecure (4.2.1 (c) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member very weak and insecure (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp(s) light intensity significantly reduced both aiming to floor (4.3.3 (a) (ii)) | 1 |
| Rear Upper Outline marker lamp not working both (4.2.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under side (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top side under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to front hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis where jacking points are fitted (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis where jacking points are fitted (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter sill, out rigger to inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured broken where the spring houses the front bush (5.3.1 (b) (i)) | 1 |
| Offside Rear Leaf spring fractured broken where the spring houses the front bush (5.3.1 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch rear of road wheel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view mirror glass |3.3 |b| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassiss outrigger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step sideloading door |6.1.B.2| | 1 |
| Offside Rear Seat belt stitching incomplete |5.2.2b| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / step |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, behind shock |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by shock |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by shock mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis |6.1.1 |c| |i|| | 1 |
| Brake valve has an excessive discharge of oil engine |3.6.E.1| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached loose bolt top of link |5.3.4 |a| |ii|| | 1 |
| Prop shaft bearing excessively worn 2nd bearing - marked in yellow (6.1.7 (b) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner wing |6.1.B.2| | 1 |
| Nearside Rear Suspension component likely to become detached U bolts loose leaf spring misaligned (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush likely to become detached loose (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Lower Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front of leaf spring out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |inner arch| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |inner arch| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by x member |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member both sides |3.1.9| | 1 |
| Rear Braking system leaking pipe to flex |3.6.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger both sides |2.4.A.3| | 1 |
| Offside Outer Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside All outline marker lamps missing |4.2.1 |a|| | 1 |
| Nearside All outline marker lamps missing |4.2.1 |a|| | 1 |
| All position lamps not working all side markers |1.1.A.3b| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength door frame @ rear loading doors |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Box Section |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger @ outer end |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner Panel |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt obviously repaired |5.2.2c| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Body rails as marked. |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out riggers as marked. |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As marked. |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Body floor as marked. |6.1.B.2| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| Forward bush excessive play. |2.4.B.1b| | 1 |
| Nearside Front Body has a sharp edge caused by damage Mirror trim missing. |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired step |2.4.A.3| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bearing loose |2.4.G.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Stop lamp|s| adversely affected by the operation of another lamp bulb fitted incorrect |4.3.3 |b|| | 1 |
| Offside Front Headlamp lens seriously defective lens cloudy |4.1.1 |b| |ii|| | 1 |
| Brake fluid contaminated black in colour |1.8 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis and inner wing within 30cms of servo assistance |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing near suspension mounting |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near sub-frame mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing within 30cms of mountings |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis at spring mounts |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis at spring mounts |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis and inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced at spring mountings |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at spring mountings |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shocker top mount |5.3.6 |a| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross-member near mountings nearside and offside |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill below step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced near brake pipes |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above sub-frame |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis near brake load sensing valve |6.2.2 |d| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step to sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting, front |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axel |6.1.B.2| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp affects position lamp |1.4.A.2h| | 1 |
| Offside Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii)) | 1 |
| Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to sill |as marked| |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to sill |as marked| |6.1.1 |c| |i|| | 1 |
| Nearside Front Brake pipe connection leaking on a hydraulic braking system flexi to mastercylinder |1.1.11 |b| |ii|| | 1 |
| Rear Other passenger door does not latch securely closed rear doors held shut with padlock |6.2.3 |a|| | 1 |
| Offside Rear fog lamp emits a light other than red lens broken |1.3.2e| | 1 |
| Brake pedal anti-slip provision loose worn (1.1.2 (c)) | 1 |
| Offside Front Steering linkage deformed (2.1.3 (c) (i)) | 1 |
| Offside Front Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 1 |
| Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Brake valve leaking rear load sensing valve |3.6.A.1| | 1 |
| Front Power steering component insecure reservoir |2.1.5 |d| |i|| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member all |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind wheel |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner sill |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded of leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis and inner panel by rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis by rear leaf spring mount |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Central Front Bonnet primary retaining device ineffective |3.1 |c|| | 1 |
| Nearside Front Suspension component corroded and seriously weakened inner panel excessively corroded with 30cm of chaise leg |5.3.3 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded front strut |2.4.A.3| | 1 |
| Nearside Rear Body insecure and dangerous to other road users WHEEL GUARD |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users WHEEL GUARD |6.1.B.1b| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded engine bay chassic leg |2.2.C.1h| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded cab |5.2.6| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion truck bed |6.1.C.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch X3 |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch X2 |2.4.A.3| | 1 |
| Nearside Front Seat belt adjustment fitting badly deteriorated |5.2.3| | 1 |
| Other passenger door cannot be opened from outside the vehicle Bonnet |6.2.3 |a|| | 1 |
| Offside Outer Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outer Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under wheel arch |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush anti roll bar link loose |2.4.G.2| | 1 |
| Centre Drive shaft uj which forms part of the suspension has an incorrectly seated universal joint flange prop joint bolt has fallen out |2.4.G.4c| | 1 |
| Nearside Steering arm has relative movement at its fixings inner track rod |2.2.B.1h| | 1 |
| Offside Steering arm has relative movement at its fixings inner track rod |2.2.B.1h| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill and step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor to step and inner sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch corroded |2.4.A.3| | 1 |
| Electrical wiring damaged, likely to cause a short hanging along side prop |1.9.2b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis at bump stops |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis at bump stop |2.4.A.3| | 1 |
| Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Nearside/offside inner chassis |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside inner sill /step point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Osr Inner arch |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside inner sill |6.1.B.2| | 1 |
| Brake performance not tested leaking brake fluid (1.2.1 (g)) | 1 |
| Centre Exhaust system not adequately supported rubbers broken |7.1.1| | 1 |
| Nearside Rear Leaf spring main leaf fractured anchor spring eye broken & missing a section (5.3.1 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch adjacent to shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings subframe mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings subframe |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings suspension spring |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Central Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings subframe |6.1.B.2| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings n/s/ under body sill |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings o/s sill |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step sill |6.1.B.2| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement Both `D` bushes. |2.4.G.2| | 1 |
| Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Both arms trailing bushes. |2.4.G.2| | 1 |
| Nearside Front Body insecure and dangerous to other road users Mudflap |6.1.B.1b| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush And offside drop links |2.4.G.2| | 1 |
| Offside Front Body component damaged and likely to cause injury WING SHARP EDGE |6.2.1 |a| |i|| | 1 |
| Nearside Front Macpherson strut insecurely attached bottom pinch bolt (5.3.3 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under the bonnet and behind the front bumper chassis have hole (6.2.2 (d) (ii)) | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under the bonnet and behind the front bumper chassis have holes (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch, inner and outer sill and rear chassis and osr inner wheel arch have holes (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting to rear inner and outer sill and rear chassis and inner wheel arch have hole (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and rear jacking points corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and rear jacking points (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced drive side footwell corroded and has hole (6.1.1 (c) (i)) | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp most rear lights affected when fog lamp is on |1.3.2f| | 1 |
| Offside Front Outer Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Braking system leaking brake hose |3.6.A.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front of Drivers step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner cill holed within 30 cm of Rear spring shackle |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear crossmember below rear spring shackle |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember holed at rear spring shackle |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear inner arch holed at rear of wheel. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch holed next to strut |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Holed at rear crossmember from rear spring shackle |6.1.B.2| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step /sill (6.2.2 (d) (i)) | 1 |
| Offside Front Steering arm inappropriately modified |2.2.C.1e| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill, 2 holes |6.1.B.2| | 1 |
| Offside Rear Outer Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Power steering pump leaking from a seal |2.3.1b| | 1 |
| Centre Exhaust has a mounting that does not fully support the exhaust system |6.3.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step & floor |5.2.6| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings n/s&o/s front inner bays/wheel arches & chassis legs |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger n/s&o/s |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r shock mount |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill around step |6.1.B.2| | 1 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Leg Under Bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury Excessively Corroded (6.2.8 (b)) | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury Excessively Corroded (6.2.8 (b)) | 1 |
| Offside Front Body component likely to become detached Step (6.2.1 (a) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger Corroded (6.1.1 (c) (i)) | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement Front Crossmember Excessively Corroded (6.1.8 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Strut Top (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear All position lamps not working side marker |1.1.A.3b| | 1 |
| Parking brake lever is defective |3.1.3| | 1 |
| Nearside Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing were wing meet floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing were wing meet floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement inner |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/step panel |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab corner |5.2.6| | 1 |
| Front Steering rack insecure to the extent there is excessive movement at the mountings (2.1.3 (a) (ii)) | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 1 |
| Front Bonnet retaining device ineffective Bonnet unable to open |8.4.2| | 1 |
| Central Rear Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 1 |
| Nearside Rear Upper Electrical wiring insecure |1.9.2a| | 1 |
| Outer Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Front Brake pipe inadequately clipped under bonnet above engine |3.6.B.1| | 1 |
| Fuel system component leaking (engine) (6.1.3 (b) (i)) | 1 |
| Nearside Front Steering linkage ball joint has excessive play (inner rack joint) (2.1.3 (b) (i)) | 1 |
| Offside Front Steering linkage ball joint has excessive play (inner rack joint) (2.1.3 (b) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (rear bush) (5.3.4 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 1 |
| Nearside Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 1 |
| Offside Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer (6.1.1 (c) (i)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected rear wiring (4.11 (a) (ii)) | 1 |
| Position lamp not working both front side lights (4.2.1 (a) (ii)) | 1 |
| Steering rack gaiter missing or no longer prevents the ingress of dirt both front (2.1.3 (g) (ii)) | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp when indicator is on |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded on rear box panel |2.4.A.3| | 1 |
| Nearside Inner Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner `outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength inne=outer sill |5.2.6| | 1 |
| Outer Rear Seat belt stitching not secure |5.2.2b| | 1 |
| Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
| Front Window damaged and affecting the driver`s view of an obligatory external mirror |3.2 |a| |ii|| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Central Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Central Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear bumper |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded cross member marked |2.4.A.3| | 1 |
| Statutory seat belt missing unable to access seatbelt immediately behind drivers seat |5.1.1| | 1 |
| Subframe mounting prescribed area is excessively corroded chassis rail.front subframe mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded various.offside rear spring front mounting x2 |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded various.nearside rear spring rear mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded various.nearside rear spring front mounting |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both inner sills and n/s outer sill corroded (6.2.2 (d) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated both centre bearings |6.1.7 |d| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced over axle |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced over axle |6.1.1 |c| |i|| | 1 |
| Headlamp aim projected beam image is obviously incorrect BOTH (4.1.2 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s front chassis leg holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s front chassis holed at front |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s rear chassis holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear chassis holed |2.4.A.3| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc o/s front |2.5.C.1a| | 1 |
| Front wheel bearing has excessive play o/s front |2.5.A.3c| | 1 |
| Front wheel bearing rough when rotated o/s front |2.5.A.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s rear chassis leg holed |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded n/s rear chassis leg holed |3.3.A.2| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view o/s |8.1.2a| | 1 |
| Macpherson strut modified so the suspension is likely to fail other components n/s front inner wing holed (5.3.3 (c) (ii)) | 1 |
| Macpherson strut modified so the suspension is likely to fail other components o/s front inner wing holed (5.3.3 (c) (ii)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced o/s front chassis leg (6.1.1 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced n/s front chassis leg (6.1.1 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced o/s middle chassis section holed (6.1.1 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced n/s middle chassis section holed (6.1.1 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering o/s front inner wing to strut top (6.1.1 (c) (ii)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s front inner wing to strut top (6.1.1 (c) (ii)) | 1 |
| Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced o/s foot step coroded (6.1.1 (b) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember holed full length (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s rear outer chassis to spring (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s rear outer chassis holed to spring (5.3.6 (a) (i)) | 1 |
| Vehicle structure strengthening plate or fastening insecure n/s foot step holed (6.1.1 (b) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s front under sill to step holed (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s front foot step |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s front foot step |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear inner wing holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s front inner wing holed |2.4.A.3| | 1 |
| Front Radius arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner sills |6.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced lnner sill |6.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under body |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded under arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under body above leaf mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded under arch sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch upper |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x5 |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x4 |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x5 |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded rear leafspring mounting area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear inner arch |2.4.A.3| | 1 |
| Fuel cap/sealing device ineffective fuel cap insecure |6.1.3 |b| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner /outer sill |full length| |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top in engine bay |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top in engine bay |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front and rear spring mounting |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front and rear spring mounting |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis by load valve |insecure| |6.1.1 |c| |ii|| | 1 |
| Fuel tank insecure FRONT STRAP BROKEN |7.2.1| | 1 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc STRAP LOOSE |2.5.C.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR OUTRIGGER |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded MAIN CHASSIS MEMBER |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp flashing with the indicator |1.1.A.3f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheelarch to floor |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Rear sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill several |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill several |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger area |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis box section |3.3.A.2| | 1 |
| Rear Fuel tank insecure Tank Strap badly corroded. |6.1.3 |a| |i|| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member. |6.1.1 |c| |ii|| | 1 |
| Nearside Front Inner Body insecure to the extent that stability is seriously impaired Step area. |6.2.2 |a| |ii|| | 1 |
| Nearside Rear position lamp|s| incorrect colour lense damaged |1.1.A.3e| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded panel by fuel tank |3.1.9| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Centre Rear Dropside cannot be secured in the closed position |6.4.1| | 1 |
| Fuel tank insecure Support strap badly corroded |7.2.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shocky mount |2.4.A.3| | 1 |
| Macpherson strut insecure |2.4.G.1| | 1 |
| Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x4 |6.1.B.2| | 1 |
| Emissions not tested Rear tailpipe and silencer missing (8.2.2.2 (e)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sliding door sill |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine bay chassis member holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill under step |6.1.B.2| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Rear position lamp|s| not working offside rear body marker |1.1.A.3b| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp offside and nearside, light up when brakes are applied |1.1.A.3f| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp go`s off when brakes are applied |1.4.A.2h| | 1 |
| Power steering malfunctioning rough when turning |2.3.3a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill X1 |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill X3 |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill X1 |5.2.6| | 1 |
| Nearside Rear Lower Torsion bar attachment bracket loose |2.4.E.4a| | 1 |
| Offside Outer Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Front Lower Radius arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside All position lamps not working front and rear |1.1.A.3b| | 1 |
| Nearside Rear Lower Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Offside Rear Lower Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above rear axle |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above rear axle |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by foot step |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer flitch in front of rear wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer flitch in front of rear wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch behind rear wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch behind rear wheel |6.1.B.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle chassis |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis corroded at load sensing valve |6.1.B.2| | 1 |
| Nearside Rear Seat belt flexible stalk cable has broken strands passenger seat, first row |5.2.4b| | 1 |
| Passenger door does not latch securely closed |6.5.11b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded several places near shackle mount.... |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch several places.... |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded upper stut top panel....|note; is next to main wireing loom.| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section.... |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section and inner chassis panels.... |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch/floor |2.4.A.3| | 1 |
| Front Valve stem seriously misaligned |4.1.D.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out-rigger area |2.4.A.3| | 1 |
| Nearside Front Headlamp levelling device inoperative leveler not working n/s/f head lamp. (4.1.5 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis cab back |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis cab back |5.2.6| | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened fouling inner road wheel |3.5.1b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced condensation in the head lamp |1.7.5a| | 1 |
| Rear Service brake excessively fluctuating both |1.2.1 |e|| | 1 |
| Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected smashed showing white light |4.5.1 |b| |ii|| | 1 |
| Rear Spare wheel insecure in carrier |6.1.5 |b| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to chassis (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch chassis (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded flitch under wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded flitch under wheel arch |2.4.A.3| | 1 |
| Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear |2.5.A.1c| | 1 |
| Central Front Fuel tank insecure tank insecure temporary fixing in place (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill filled with foam (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Offside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Offside Steering arm has relative movement at its fixings Inner rack end |2.2.B.1h| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view Door mirror |8.1.2a| | 1 |
| Rear Towbar component insecure Not fitted correctly |6.6.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis holed |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outrigger holedx3 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outrigger holed x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis holed |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Chassis holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Chassis holed |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Rear Fuel tank so insecure there is a risk of fire strap corroded through |6.1.3 |a| |ii|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Outer Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out riger rear or spring |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner + outer sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded floor surface corroded |2.4.A.3| | 1 |
| Central Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis rail behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail behind wheel (5.3.6 (a) (i)) | 1 |
| Central Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill central (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tank mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar missing |2.4.G.1| | 1 |
| Offside Front Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Upper Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under foot step area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount area |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp function impaired |1.1.A.3f| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp indicator affecting position lamp (4.2.3 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area marked with blue chalk (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings excessive corrosion on NSF step OSF step |6.1.B.2| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded On chassis outrigger uder floor |5.2.6| | 1 |
| Nearside Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to back chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to back chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer complete sill (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer complete sill (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure 1 broken strap (6.1.3 (a) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Offside Front Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Offside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Front Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis shock |5.3.6 |a| |i|| | 1 |
| Nearside Lower Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Offside Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded wheel arch/out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at cross-member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at cross-member |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour lense broken showing white light |1.4.A.2f| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner edge chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wheel arch by spring and strut (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wheel arch by spring and strut (6.1.1 (c) (ii)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and drivers step (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and passenger step (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step to box section corroded and not repaired properly (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section by fuel pipe (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired chassis and inner wing strut area (6.2.2 (d) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired chassis and inner wing to chassis (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner box section (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section across rear axle (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis by spring hanger (6.2.2 (d) (i)) | 1 |
| Brake performance not tested too dangerous chassis corroded (1.2.1 (g)) | 1 |
| Front Anti-roll bar pin or bush excessively worn both sides |5.3.4 |a| |i|| | 1 |
| Stop lamp adversely affected by the operation of another lamp both rear stop lamps bulbs fitted incorrectly |1.2.1f| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp both front side lamps operating when brakes are applied |due to incorrectly fitted brake lamp bulbs| |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis in 3 places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in 2 places |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis engine bay |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis osf inner wing |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded sill in 3 places |2.4.A.3| | 1 |
| Offside Front Lower Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill in 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by brake (valve) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step in 2 places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in 2 places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis (by alternator) (5.3.6 (a) (i)) | 1 |
| Track rod end ball joint has excessive play near side inner rack end)9 (2.1.3 (b) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill weld incomplete (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing holed (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded lower step |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner shock mount |2.4.A.3| | 1 |
| Nearside Front Lower Sub-frame has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring rear hanger |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
| Rear Direction indicator light intensity significantly reduced effacting other lamps |4.4.3 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side chassis rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side chassis rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill chassis rigger |5.3.6 |a| |i|| | 1 |
| Stop lamp adversely affected by the operation of another lamp park lamp |1.2.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel house to floor |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Door Step |6.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear Spring mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear Spring mounts |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Load valve mounting area |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill area |5.2.6| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axel (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working connections corroded at light cluster |1.4.A.2c| | 1 |
| Nearside Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill front section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger rear |2.4.A.3| | 1 |
| Body has a sharp edge caused by damage grii |6.1.C.1| | 1 |
| Body has a sharp edge caused by damage front bumper |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassi in a number of places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassi in a number of places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis over tank/subframe area |2.4.A.3| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill hole |6.1.B.2| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front out riggers (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x 2chassy (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front rear wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassic inner rear wheel |6.1.A.1| | 1 |
| Nearside Brake valve insecurely mounted coroded |3.6.A.2a| | 1 |
| Nearside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering above axle (6.1.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering above axle (6.1.1 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected top suspension mounting |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring hanger holed and corroded |5.3.6 |a| |ii|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected shocker top mounting |5.3.6 |a| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above rear axle outer part of chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Body component likely to become detached drivers door step has been filled with expanding foam |6.2.1 |a| |ii|| | 1 |
| Offside Front Body component likely to become detached drivers door step has been filled with expanding foam |6.2.1 |a| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg inside wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Brake pipe inadequately clipped from master |3.6.B.1| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i|| | 1 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance flashing on and off |1.1.A.3d| | 1 |
| Nearside Rear Rear fog lamp emits a light other than red white light showing |1.3.2e| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded within 30cm of spring mount |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front or rear wheel |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step holed in 2 places |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill holed in 3 places |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step holed in 3 places |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch marked in yellow crayon |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch marked in yellow crayon |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking leaking from brake drum |3.6.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill times 3 holes |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis rail |view from wheel| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassi rail |view from wheel| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mount areas |several| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mount areas |several| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassi rail by washer bottle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi rail by rear spring front section |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/outrigger |2.4.A.3| | 1 |
| Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail in front of engine |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch area between floor and body |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in wheel arch |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine from silencer box |7.4.B.3b| | 1 |
| Parking brake lever inappropriately modified no handbrake warning light |3.1.8| | 1 |
| Nearside Front Front position lamp|s| not working side light out |1.1.A.3b| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill near step |5.2.6| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Fuel system component leaking Injector No. 2 |7.2.3| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure (6.1.7 (g) (ii)) | 1 |
| Emissions not tested Injector leaking (8.2.1.2 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bump stop, Shock absorber fixing. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bump stop, Shock absorber fixing. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. Shock absorber mounting. (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure Mounting strap corroded. (6.1.3 (a) (i)) | 1 |
| Exhaust fumes entering cabin Diesel injector seal leaking exhaust gas. (6.1.2 (b) (i)) | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both legs round bump stops (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner wheel arch (6.1.1 (a) (i)) | 1 |
| Rear Brake load sensing valve linkage defective and function impaired seized (1.1.17 (a)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger,lower and rear faces |2.4.A.3| | 1 |
| Position lamp not working all not working [front and rear] (4.2.1 (a) (ii)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel both sides (1.3.1 (a) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting valence (6.2.2 (d) (i)) | 1 |
| Offside Front Floor excessively deteriorated step |6.2.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Above rear exhaust pipe |6.1.B.2| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Above tow bar mount |6.1.B.2| | 1 |
| Nearside Front Torsion bar attachment bracket damaged and seriously weakened |2.4.E.4c| | 1 |
| Offside Front Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Position lamp showing white light to the rear light lense cracked (4.2.3 (a) (ii)) | 1 |
| Rear Service brake has no recorded effort at a wheel n/s+o/s (1.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sills |6.2.2 |d| |i|| | 1 |
| Rear Service brake effort inadequate at a wheel n/s+o/s |1.2.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sills (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner archers (5.3.6 (a) (i)) | 1 |
| Front wheel bearing has excessive play offside |2.5.A.3c| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell under vehicle |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell under vehicle |6.1.B.2| | 1 |
| Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/side & n/side |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill |6.1.B.2| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off all |1.4.B.1f| | 1 |
| Direction indicators flashing less than 60 times a minute all, with ignition off |1.4.A.2g| | 1 |
| Rear fog lamp tell tale not working on all the time |1.3.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg holed and corroded near engine mounting in 2 areas |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member near leaf spring mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member near leaf spring mount |6.1.B.2| | 1 |
| Nearside Front Brake pipe leaking to rear, at centre union |3.6.A.1| | 1 |
| Nearside Inner Front Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Inner Front Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Brake pipe inadequately supported going to load sensing valve |3.6.B.1| | 1 |
| Fuel tank leaking + filler hose area (6.1.3 (b) (i)) | 1 |
| Nearside Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under step areas (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis crossmember by spring mounts (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing areas (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing areas (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded out-rigger area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross-member area |2.4.A.3| | 1 |
| Front Subframe mounting prescribed area is excessively corroded offside front chassis rail |2.4.A.3| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt swivel |2.4.G.2| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt swivel |2.4.G.2| | 1 |
| Nearside Rear Leaf spring anchor bracket fractured (5.3.1 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by front of rear spring |2.4.A.3| | 1 |
| Rear Exhaust system insecure mount corroded/broken (6.1.2 (a)) | 1 |
| Nearside Front Seat belt buckle not functioning as intended sand in keep (7.1.2 (d)) | 1 |
| Nearside Rear Rear fog lamp emits a light other than red temporary repair |1.3.2e| | 1 |
| Rear Lower Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Leaf spring to axle securing bolt missing |2.4.B.7b| | 1 |
| Electrical wiring insecure battery terminal |1.9.2a| | 1 |
| Central Rear Prop shaft securing bolt missing |6.1.7 |a| |i|| | 1 |
| Central Rear Prop shaft likely to become detached connecting bolt missing |6.1.7 |a| |ii|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/arch marked (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/chassis member marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/lower arch marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis marked above fuel filler pipe (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength outer face of chassis marked by leaf spring mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step marked (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded complete inner sill |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is inadequately repaired cross member both sides |the cross member which the hand brake fastens to |2.4.A.3| | 1 |
| Nearside Rear Electrical wiring insecure on chassis |1.9.2a| | 1 |
| Nearside Front Outer Suspension spring mounting prescribed area is excessively corroded chassis |inner arch| |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded complete inner wheel arch holed and heavily corroded |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired inner arch in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front spring hanger mount |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front spring hanger mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Shock absorbers likely to become detached TOP MOUNTING MISSING (5.3.2 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/f o/s/r inner sill |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/f o/s/r inner sill |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded extensive too floor inner sills /outer sills/chassis /bulkhead behind wheel/inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inn arch |2.4.A.3| | 1 |
| Nearside Rear Direction indicators missing |1.4.A.2b| | 1 |
| Nearside Inner Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Leaf spring fractured Shackle point (5.3.1 (b) (i)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bearing both sides d bushes |2.4.G.2| | 1 |
| Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock x2 |2.4.A.3| | 1 |
| Central Rear Lower Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front end mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount front and rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis area |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Side repeater lens defective such that the emitted light is adversely affected missing (4.4.1 (b) (ii)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill hold (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chaissie hold (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch hold (6.1.1 (c) (i)) | 1 |
| Headlamp aim beam image obviously incorrect both headlights |1.8.A.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion inner wing area |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion inner and outer cill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion rear corner |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion rear corner |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion inner and outer cil |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings extensive corrosion inner wing area |6.1.B.2| | 1 |
| Rear Sub-frame fractured |6.1.8a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded INNER SILL SILL STEP AREA UNDERSIDE |5.2.6| | 1 |
| Cab steps so insecure it is likely to cause injury both (6.2.8 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light showing white light (4.5.4 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/cab step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / cab step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill just behind cab step (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill approx half way down (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill adjacent to rear spring front hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/outer sill adjacent to rear spring front hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill just in front of rear spring front hanger , in front of other corroded area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill adjacent to footwell. |6.1.B.2| | 1 |
| Rear Lower Suspension component missing both sides bump stops missing |5.3.3 |a| |ii|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing area rusted & holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded MULTIPLE HOLES |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded MULTIPLE HOLES |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded multiple holes |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded multiple holes |2.4.A.3| | 1 |
| Nearside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded drop sill next to step |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis|several places| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis|several places| |2.4.A.3| | 1 |
| Suspension component corroded and seriously weakened Both rear |5.3.3 |b| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both inner sills |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre chassis mount to inner sill holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre chassis mount to inner sill holed |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Front of inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Front inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger mount |2.4.A.3| | 1 |
| Parking brake lever pivot worn to the extent that the brake may inadvertently release (1.1.6 (b) (ii)) | 1 |
| Offside Outer Front Braking system leaking |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep and inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and back of cab (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor and doorstep (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by antiroll bar droplink (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step , under body (6.1.1 (c) (i)) | 1 |
| Offside Inner Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Inner Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill to step |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail inside wheel arch |2.4.A.3| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush to the front marked yellow |2.4.B.2| | 1 |
| Offside Rear Leaf spring fractured to the rear marked yellow |2.4.B.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch marked yellow |2.4.A.3| | 1 |
| Offside Rear Side repeater insecure |1.4.A.2b| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Offside Leaf spring main leaf fractured |5.3.1 |b| |ii|| | 1 |
| Offside Front Wheel bearing rough when rotated Also play |5.1.3 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis within shocker |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch in 2 places |2.4.A.3| | 1 |
| Fuel tank insecure only one strap holding other one corroded (6.1.3 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section by spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section by spring hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch/tub (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch/tub (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central inner sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg to rear of s/absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg to rear of s/absorber |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount |most rear| |6.1.B.2| | 1 |
| Offside Front Steering system lock to lock check exposes a seriously damaged brake pipe |2.2.D.2b| | 1 |
| Trailer electrical socket deteriorated so that lead cannot be securely connected missing |1.9.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/floor panel. |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded central chassis outrigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded central chassis outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember/chassis leg behind the leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor above leaf spring |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone front bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End of inner sill near leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Obligatory indirect vision device does not provide a view to the rear Damaged (3.3 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner arch (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner arch chassis leg (5.3.6 (a) (ii)) | 1 |
| Nearside Body has a sharp edge caused by damage Mirror back |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at shock mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded At shock mounting |2.4.A.3| | 1 |
| Nearside Rear Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering o/s inner wing at top and by chassis rail front |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering flitch panel inner wing |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s inner sills/floor pans |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering outer sills,n/s and o/s, |6.1.A.1| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s outriggers |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s and o/s boot floor / inner wings/chassis |6.1.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outer wheel arch /sill end |6.1.C.1| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill.. inner |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under sill full length |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s o/s front inner wings |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Drivers seat insecure RETIGHTEN (6.2.5 (a) (ii)) | 1 |
| Offside Rear Position lamp lens seriously defective replace (4.2.1 (b)) | 1 |
| Nearside passenger door cannot be opened from outside the vehicle load door has high security lock, unable to open to inspect vehicle structure |6.2.B.1c| | 1 |
| Rear passenger door cannot be opened from outside the vehicle load door has high security lock, unable to open to inspect vehicle structure |6.2.B.1c| | 1 |
| Nearside Rear Direction indicator incorrect colour lens cracked, showing white light |1.4.A.2f| | 1 |
| Offside Obligatory mirror insecure glass held on with tape, tape loose allowing glass to move |8.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2 holes |2.4.A.3| | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp bad earth (4.3.3 (b)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp bad earth (4.4.3 (b)) | 1 |
| Brake pedal anti-slip provision loose refit |1.1.2 |c|| | 1 |
| Nearside Front Outer Body has a sharp edge caused by damage sill |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by leaf spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded coil spring top mount turret |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing/turret |2.4.A.3| | 1 |
| Stop lamp|s| lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
| Headlamp aim beam image obviously incorrect O/s |1.8.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded And distorted, sill area |2.4.A.3| | 1 |
| Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement n/s and o/s |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush Bush |2.4.G.2| | 1 |
| Statutory seat belt missing All rear seat belts unable to test due to covered in work tools |5.1.1| | 1 |
| Offside Leaf spring cracked Piece broken off at anchor point |2.4.B.1a| | 1 |
| Fuel tank insecure Strap corroded and snapped |7.2.1| | 1 |
| Hinged tailboard cannot be secured in the closed position Bonnet |6.4.1| | 1 |
| Offside Front Upper Brake pipe leaking by brake servo |3.6.A.1| | 1 |
| Front Upper Power steering component|s| leaking all |2.3.3b| | 1 |
| Front Power steering pipe|s| or hose|s| excessively corroded both |2.3.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill marked |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill marked |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch | marked with yellow chalk| |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |marked with yellow chalk| |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around rear spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Severe corrosion (holed) around front leaf spring mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near bump stop mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near bump stop mounting |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded front spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring mounting area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing in various places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under chassis near brake compensator (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind rear wheel (5.3.6 (a) (i)) | 1 |
| Nearside Front Front position lamp|s| adversely affected by the operation of another lamp when brakes applied |1.1.A.3f| | 1 |
| Offside Front Front position lamp|s| adversely affected by the operation of another lamp when brakes applied |1.1.A.3f| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear end |2.4.A.3| | 1 |
| Power steering component|s| leaking pas leak steering judders |2.3.3b| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear drivers spring area |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear drivers inner pannel |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear cross member |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear floor both sides |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both sills inner sides drivers and passsenger |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering floor and chassis behind passenger wheel |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering floor and chassis behind drivers rear rear |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing driver side by strut |6.1.A.1| | 1 |
| Shock absorber has a serious fluid leak passenger rear |2.7.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step box |6.1.B.2| | 1 |
| Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill holed inner and outer |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch holed |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded centre sill holed |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded centre inner sill holed |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner floor step holed |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring hanger bracket |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by strut top mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring mounting (5.3.6 (a) (i)) | 1 |
| Battery insecure battery behind drivers seat |1.9.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner wing under bonnet (6.1.1 (c) (i)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam dipped beam only working on with main beams on |4.1.3 |b|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT AND REAR OF LEAF SPRING MOUNTS (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR OF LEAF SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength All OSF OSR NSF marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 1 |
| Fuel tank insecure STRAP CORRODED |7.2.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis behind wheel |6.1.B.2| | 1 |
| Offside Outer Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Outrigger holed x 2 |6.1.A.1| | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering Chassis holed |6.1.A.1| | 1 |
| Nearside Rear Outline marker lamp missing end marker lamp broken and damaged (4.2.1 (a) (ii)) | 1 |
| Offside Rear Outline marker lamp missing end marker broken and damaged (4.2.1 (a) (ii)) | 1 |
| Central Prop shaft securing bolt loose bolt 3rd section of prop shaft as marked (6.1.7 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion both rear sides and tail gate |6.1.C.1| | 1 |
| Nearside Rear Dropside cannot be secured in the closed position rear latch missing |6.4.1| | 1 |
| Offside Tailgate cannot be secured in the closed position securing pin missing |6.4.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis crossmembers |2.4.A.3| | 1 |
| Front Upper Suspension spring mounting prescribed area is excessively corroded both sides front inner wheel arches VERY corroded |2.4.A.3| | 1 |
| Nearside Rear Upper Anti-roll bar linkage likely to become detached anti roll bar drop link top bolt loose |5.3.3 |a| |ii|| | 1 |
| Offside Front Mechanical brake component locking device missing brake unit bolt missing |3.5.1l| | 1 |
| Nearside Body has a sharp edge caused by corrosion butt |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion butt |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings butt tipping mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings by back of cab |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings by drop link mounting holed |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar locating pin insecure lose |2.4.G.3a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis |2.4.A.3| | 1 |
| Central Front Lower Prop shaft bearing excessively worn |6.1.7 |b| |i|| | 1 |
| Offside Front Lower Driver`s seat with a defective structure |6.2.5 |a| |i|| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired both sides front |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside & nearside front |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside & nearside rear |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel/sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross section |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel/floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg near offside engine mount |6.1.A.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing/wheel arch to floor |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing/wheel arch to floor |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Seal. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan |6.1.B.2| | 1 |
| Inner Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement Rear Wbone Bush |2.4.G.2| | 1 |
| Hydraulic fluid leaking excessively TIPPER (8.4.1 (a) (i)) | 1 |
| Nearside Rear Rear fog lamp does not emit a steady red light Broken showing white light |4.5.4 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded battery |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded lower door step |5.2.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside front foot step (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside chassis leg (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front inner wheel arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear chassis (leaf spring area) (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear chassis (leaf spring area) (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear wheel arche (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear wheel arch (5.3.6 (a) (i)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength Offside front chassis/under bonnet (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside front step area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear monting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mounting/inner sill. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Floor/inner wheel arch. |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step/inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step/inner sill |5.2.6| | 1 |
| Offside Front Obligatory mirror seriously obscured affecting the rear view cracked |8.1.2a| | 1 |
| Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance lens cracked |1.2.1d| | 1 |
| Nearside Front Ball joint deformed and unserviceable |2.2.C.1d| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded under bonnet |3.6.C.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg / under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Front drive shaft bearing fastener insecure |2.5.C.1d| | 1 |
| Offside Front Front drive shaft bearing fastener insecure |2.5.C.1d| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch rear (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch near spring (6.2.2 (d) (i)) | 1 |
| Outer Rear Lower Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Offside Inner Rear brake drum contaminated by oil |3.5.1h| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear most (5.3.4 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength several places (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab/chassis (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inside cab (7.1.1 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Prop mounting (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cab (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded 2 places under sear
1 place rear of cab |5.2.6| | 1 |
| Nearside Fuel tank insecure front strap |7.2.1| | 1 |
| Central Prop shaft securing bolt loose uj retaining bolt (6.1.7 (a) (i)) | 1 |
| Central Prop shaft securing bolt missing uj joint (6.1.7 (a) (i)) | 1 |
| Central Lower engine mounting deteriorated resulting in excessive movement stay mount |6.1.D.1a| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch as marked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings box section as marked |6.1.B.2| | 1 |
| Nearside Front Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre box section near door steps (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis under wheel arch holed and corroded (6.2.2 (d) (i)) | 1 |
| Brake load sensing valve inoperative and ABS not fitted or inoperative weeping brake fluid (1.1.17 (c) (ii)) | 1 |
| Offside All position lamps not working centre |1.1.A.3b| | 1 |
| Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed and corroded |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills holed and corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top under bonnet + chassis above n/s front subframe mounting support (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under front wing behind suspension leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Windscreen in such a condition that visibility through swept area is seriously affected more than 40mm in the swept area (3.2 (c) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded turret |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Position lamp adversely affected by the operation of another lamp both rear |4.2.3 |c|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills as marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill as marked |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings leaf spring mount upper and lower bracket as marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings leaf spring mount bracket upper and lower |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings exhaust bracket |6.1.B.2| | 1 |
| Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near exhaust bracket mount |6.1.B.2| | 1 |
| Nearside Rear Shock absorber missing insecure damping rubber hanging |2.7.1b| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings at different place as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear front wishbone mounting bush |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg near gearbox mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/ chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outersill / inner lower wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill x2 |6.2.2 |d| |i|| | 1 |
| Nearside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill x2 |6.2.2 |d| |i|| | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting drop sill |6.2.2 |d| |i|| | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting drop sill |6.2.2 |d| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner drop sill, rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger box section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner lower wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded Chassis corroded at spring hanger |2.4.A.3| | 1 |
| Nearside Front position lamp|s| not working not bulb |1.1.A.3b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2h |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger in front of rear wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger behind rear wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near load sensing valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/outrigger |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eye mounting area |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind suspension leg |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind suspension leg |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member close to rear of rear spring eye |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember close to rear spring eye inner side |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember close to rear spring eye |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and read mounting area |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by leaf spring |6.1.B.2| | 1 |
| Offside Vehicle structure has an inadequate repair which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering inner wheel arch |6.1.A.1| | 1 |
| Braking system leaking rear brake compensator |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Suspension arm pin or bush excessively worn |Rear Bush| |5.3.4 |a| |i|| | 1 |
| Rear Engine mounting damaged or deteriorated resulting in excessive movement Gear Box Mounting Bush |6.1.8 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger X2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch X2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis by load valve |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind brake pipe |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/wheel arch |6.1.B.2| | 1 |
| Rear Direction indicators adversely affected by the operation of another lamp both |1.4.A.2h| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings from rear spring outrigger to rear cross member |6.1.B.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings from rear spring out rigger to rear cross member and rear cross member |6.1.B.2| | 1 |
| Offside Front Trailing arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi section near spare wheel corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded all rear inner lower back pannel corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded under bonnet off side chassi corroderd top of chassi leg |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sills corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded off side inner sills corroderd |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded behind front wheel inner wing corroderd |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush suspention arm rear bush x play |2.4.G.2| | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced Under the wheel arch |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch [floor] |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter seal |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal |7.1.1 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both sides chassis legs to spring mounts |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill front leaf spring mounting point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill front part of leaf spring mounting point |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch at rear leaf spring mounting point |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger close to N/S leaf spring rear mounting |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member x2 |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/ door step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing /chassis rail |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre main chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch panel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering front cross member |6.1.A.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement lower arm rear bush |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above exhaust. (marked with white arrow) (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision doorstep |7.1.1 |a| |ii|| | 1 |
| Battery insecure clamp missing |1.9.1| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c) | 1 |
| Front Direction indicator incorrect colour Both (1.4.A.2f) | 1 |
| Nearside Front Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Offside Front Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Centre Rear Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Offside All position lamps adversely affected by the operation of another lamp |1.1.4d| | 1 |
| Nearside Front Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring shackle mount |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing |looking through wheel well| |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassic |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill end |6.1.1 |c| |i|| | 1 |
| Front Inner Suspension arm has excessive play in a pin/bush both sides |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength in front and behind spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength in front and behind spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Body panel corroded and likely to cause injury arch |6.2.1 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected box sections |5.3.6 |a| |ii|| | 1 |
| Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected archs |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp stop tail incorrectly fitted (4.3.3 (b)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to rear in three places (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis out rigger (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis in wheel arch (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to chassis (6.1.1 (c) (i)) | 1 |
| Direction indicators flashing less than 60 times a minute all indicators |1.4.A.2g| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s inner sil |6.1.B.2| | 1 |
| Nearside Rear Sub-frame corroded and seriously weakened stub axle corroded |5.3.3 |b| |i|| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear sides on the seals |6.1.1 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded 3 holes |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by spring |2.4.A.3| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL HOLE |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting HOLE BY FORWARD SPRING MOUNTING |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting HOLE BY REAR SPRING MOUNTING |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH HOLED |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL HOLED BELOW SLIDING DOOR |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting HOLE BY FORWARD SPRING MOUNTING |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced HOLES IN INNER WHEELARCH |6.1.1 |c| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL HOLED FRONT TO REAR |6.1.1 |c| |i|| | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced HOLE BELOW SLIDING DOOR |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and center inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor next to chassis rail and up into arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded extensive corrosion in all around mount |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering engine mount under bonnet |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in arch behind shocker |2.4.A.3| | 1 |
| Offside Front Outer Drive shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail in arch |2.4.A.3| | 1 |
| Central Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member x 3 |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured above axle |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch area |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded in Two Places |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front end off Leaf Spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded By Shock Mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer cill |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured broken at spring eye bush (5.3.1 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger heavily corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member holed and corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member holed and corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill to arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear behind bumper inner sill |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both inner sills corroded through in places (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear inner wheel arches to floor have become separated/corroded through (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear inner wheel arches to sills (front and rear of rear wheels) corroded through also outriggers as well (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front inner wheel arches to sills/cab corroded through (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s front inner wing corroded through under air filter box (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns rear marked with yellow chalk |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill as marked, (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill as marked, (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill as marked, (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill as marked, (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Brake performance not tested excessively corroded brake pipes |1.2.1 |g|| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under driver door |6.1.B.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced water in lamp and lens cracked |4.1.4 |b|| | 1 |
| Offside Front Steering rack insecure to the extent there is excessive movement at the mountings end off rack |2.1.3 |a| |ii|| | 1 |
| Nearside Front Bumper insecure mounting corroded away |6.1.4 |a| |i|| | 1 |
| Offside Front Upper Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rigger & inner sill |2.4.A.3| | 1 |
| Centre Front Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Main beam `tell-tale` not working too dim |1.7.4c| | 1 |
| Central Front Statutory seat belt missing receiver missing |5.1.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear chassis legs & riggers |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is severely distorted both sides rear chassis legs |2.4.A.3| | 1 |
| Loading door cannot be secured in the closed position cant open or close sliding door |6.4.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded valance behind bumper |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded drivers step |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and sill to door step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/ inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/ inner wheel arch |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill
|6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion next to light |6.1.C.1| | 1 |
| Nearside Rear Lower Loading door cannot be secured in the closed position latch |6.4.1| | 1 |
| Offside Outer Suspension component mounting prescribed area is severely distorted sill holed |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is severely distorted outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nsr damper mounting |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded osr damper mounting |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner to rear quarter |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill to rear quarter |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Offside Front Body has a projection caused by corrosion inner arch by engine mounting |6.1.C.1| | 1 |
| Offside Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring-rear mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill near seat base |5.2.6| | 1 |
| Central Lower engine mounting deteriorated resulting in excessive movement stay bar |6.1.D.1a| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded compensation valve |3.3.A.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both door steps |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch at strut mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded BY REAR SPRING SHACKLE. |2.4.A.3| | 1 |
| Nearside Front Upper Rear position lamp|s| not working cab |1.1.A.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced foot step x2 (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting crossmember |6.1.6 |i| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front most mount, 5 holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most mount, inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front most mount, inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most mount, rear inner sill and chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch area / chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded near step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis corroded within 30cm of rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis is corroded within 30cm of rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded within 30cm of rear front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded within 30cm of rear front spring mount. |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis corroded within 30cm of cross beam. |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded chassis corroded within 30cm of rear front spring mount. |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded chassis corroded within 30cm of rear spring mount. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill corroded within 30cm of seat belt lower fixing point. |5.2.6| | 1 |
| Offside Front Glazing/screen/partition not made of safety glass or safety glazing |6.9.8| | 1 |
| Front Fluid leaking continuously posing a serious risk to road safety fuel leaking |8.4.1 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drivers step (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both outriggers/leaf spring mounting points - marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/strut top (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member in front of rear wheel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in sill strengthening point in front of rear wheel (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member several places along length (6.1.1 (c) (i)) | 1 |
| Brake prescribed area is excessively corroded near side rear brake compensator mount on chassis (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shocker area |2.4.A.3| | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both side inner and outer |6.2.2 |d| |i|| | 1 |
| Offside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Rear Lower Brake valve leaking compensater valve |1.1.7 |d| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced iner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis member (5.3.6 (a) (i)) | 1 |
| Nearside Outer Body has a sharp edge caused by corrosion sil |6.1.C.1| | 1 |
| Front Fuel system component leaking excessively or a risk of fire Diesel front of engine |6.1.3 |b| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced As Marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced As Marked |6.1.1 |c| |i|| | 1 |
| Steering arm damaged and unserviceable |2.2.C.1d| | 1 |
| Integral body structure inadequately repaired such that structural rigidity is significantly reduced all previous repairs unacceptable materials used i:e mastic and paint,
entire underside of vehicle is rotten including both front wings which are tapped over. To many poor repairs and corrosion to list (6.1.1 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 places |5.3.6 |a| |i|| | 1 |
| Offside Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Nearside Outer Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 1 |
| Oil leaking excessively from engine OIL LIGHT SWITCH |8.4.1 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis end |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear cross bar |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross chassiiss |6.1.B.2| | 1 |
| Offside Rear Body has a projection caused by corrosion corrosion exstensive all over |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL HOLED (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength INNER SILL HOLED (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength OUTER SILL HOLED 30CM (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength CORNER HOLED
30CM (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength CORNER HOLED 30CM (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength HOLED (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength INNER WHEEL ARCH HOLED (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength INNER WHEEL ARCH HOLED (5.3.6 (a) (i)) | 1 |
| Nearside Inner Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion complete cill |6.1.C.1| | 1 |
| Nearside Outer Body has a sharp edge caused by corrosion complete cill |6.1.C.1| | 1 |
| Offside Inner Body has a sharp edge caused by corrosion complete cill |6.1.C.1| | 1 |
| Offside Outer Body has a sharp edge caused by corrosion complete cill |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner @ outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner@ and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear wheel arch |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering arches |6.1.1 |c| |ii|| | 1 |
| Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected both sills |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected wing |5.3.6 |a| |ii|| | 1 |
| Offside Body has a sharp edge caused by corrosion tipper body/step |6.1.C.1| | 1 |
| Rear Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Front Body component corroded and likely to cause injury side step |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Drag link end ball joint has excessive play rack |2.1.3 |b| |i|| | 1 |
| Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner and outer sills |5.3.6 |a| |ii|| | 1 |
| Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected both inner arches |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired front arches (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 1 |
| Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened swinging shackle area (5.3.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shock mount |2.4.A.3| | 1 |
| Offside Front Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg near shocker mounting point |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint REAR |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush REAR |2.4.G.2| | 1 |
| Offside Front Bumper damaged and likely to cause injury when grazed or contacted SHARP EDGES OSF OF BUMPER |6.1.4 |a| |i|| | 1 |
| Nearside Front Seat belt installation has cut and/or reworked original webbing |10.1 |a|| | 1 |
| Central Front Seat belt installation has cut and/or reworked original webbing |10.1 |a|| | 1 |
| Offside Front Seat belt installation has cut and/or reworked original webbing |10.1 |a|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OSF STEP ROTTEN TO XS |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering engine mounting |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back panel |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting/chassis |2.4.A.3| | 1 |
| Offside Bonnet retaining device ineffective bolt missing |8.4.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering top of leg |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to inner wing |2.4.A.3| | 1 |
| Nearside Front Steering lock stop loose track rod end |2.2.D.2c| | 1 |
| Nearside Outline marker lamp not working front and rear (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp missing centre (4.2.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Step sill (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Obligatory mirror missing (3.3 (a)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing under bonnet (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering nearside & offside front chassis |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside body mountings areas |6.1.B.2| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour white light showing through. |1.1.A.3e| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint lower |2.4.G.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush BOTH rear D rubbers |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded x2 |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded x2 |5.2.6| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x5 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x4 |6.1.B.2| | 1 |
| Offside Front Lower Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp all lamps affected (4.2.3 (c)) | 1 |
| Central Prop shaft bearing excessively worn chalked (6.1.7 (b) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Footwell |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Footwell |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush inner rear bush |2.4.G.2| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded Floor inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor inner wheel arch |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis cross member |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger inner sill |6.1.B.2| | 1 |
| Central Prop shaft bearing excessively worn x2 (6.1.7 (b) (i)) | 1 |
| Nearside Body has a sharp edge caused by corrosion chassi leg |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion inner step x2 |6.1.C.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Whole chassis holed both sides (marked in yellow) (6.1.1 (c) (i)) | 1 |
| Rear Brake valve has an excessive discharge of oil brake fluid leeking |3.6.E.1| | 1 |
| Nearside Inner Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Brake prescribed area is excessively corroded inner sill, by brake pipe mounting (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sil;ls (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel archwing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength iner wheel archwing (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under step (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear cab (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear cab (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Ball joint has excessive play Steering arm |2.2.B.1f| | 1 |
| Rear Rear position lamp|s| not working BOTH SIDES BODY MARKER LIGHTS |1.1.A.3b| | 1 |
| Front Upper Rear position lamp|s| not working BODY MARKER LIGHTS |1.1.A.3b| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour BROKEN LAMP UNIT |1.1.A.3e| | 1 |
| Rear Rear position lamp|s| insecure LIGHT TAIL BAR BOARD INSECURE AND DAMAGED |1.1.A.3a| | 1 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt BOTH SIDES |2.4.G.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured chassis to rear of spring |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corrosion |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corrosion |6.1.B.2| | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction paint drops on drivers view (3.1 (a) (ii)) | 1 |
| Position lamp not working Both frints (4.2.1 (a) (ii)) | 1 |
| Front Upper Position lamp not working Both front uppers (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer step sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under seal hole |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone back bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sills to step area |5.2.6| | 1 |
| Offside Outer Rear Lower Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Nearside Outer Rear Lower Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Nearside Rear Halfshaft nut missing |4.2.B.3| | 1 |
| Offside Rear Direction indicator incorrect colour white light showing lense broken |1.4.A.2f| | 1 |
| Nearside Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step and inner and outer seal panels |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases Pipe missing smoke test not possible |7.1.2| | 1 |
| Offside Front Inner Horn not working |1.6.2a| | 1 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected white light |4.5.1 |b| |ii|| | 1 |
| Offside Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp and side light (4.4.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Front Inner Cab steps so insecure it is likely to cause injury nearside and offside, corroded (6.2.8 (a) (ii)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside and offside, inner wheel arch (6.2.2 (d) (i)) | 1 |
| Rear Position lamp not working nearside and offside (4.2.1 (a) (ii)) | 1 |
| Stop lamp(s) light intensity significantly reduced nearside and offside (4.3.3 (a) (ii)) | 1 |
| Rear Direction indicator not working nearside and offside (4.4.1 (a) (ii)) | 1 |
| Rear fog lamp adversely affected by the operation of another lamp reverse lights come on with fog (4.5.4 (b)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT CROSSMEMBER HOLDING RADIATOR (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT CROSSMEMBER HOLDING ENGINE (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL UNDER STEP (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp indicator (4.2.3 (c)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear panel outer skin |out rigger| corrosion within 30cm of the rear suspension mounting point |6.1.B.2| | 1 |
| Nearside Position lamp not working when left hand direction indicator operated |4.2.1 |a|| | 1 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected when left hand indicator operated when fog lamp is switched off |4.5.1 |b| |ii|| | 1 |
| Nearside Headlamp incorrect colour |4.1.4 |a|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rearward |5.3.4 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings not safe must be removed by trailer |6.1.B.2| | 1 |
| Nearside Front Lower Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp bad earth all lights |1.1.A.3f| | 1 |
| Nearside Rear Braking system leaking poss cylinder fluid leaking from drum |3.6.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in wheelarch |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassie to rear leaf mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassie to rear shock mount |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering chassis leg near engine mounting |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg near engine mounting |6.1.A.1| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill towards rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting not connected to van |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded numerous areas chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded numerous areas chalked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded underarch |2.4.A.3| | 1 |
| Offside Rear Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill x2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii|| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp all lamps at this location affected |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x3 and rear valance |2.4.A.3| | 1 |
| Nearside Rear Brake valve insecure loose in rusty chassis |1.1.7 |c|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rearmost (5.3.4 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected above chassis leg engine bay (5.3.6 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected above chassis leg engine bay (5.3.6 (a) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis - lower face |6.1.A.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner & Outer Sills (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner & Outer Sills (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi - outer face |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis - outer face |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger - leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Front Speedometer clearly inoperative |6.7.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step X2 (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At rear shocker (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired At rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired At rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded Load valve mounting |3.6.C.3| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near side (6.1.1 (c) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake load valve mounting area |6.1.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner wing various places |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near shock absorber mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan above step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded near sliding door runner |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Under arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail above axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail above axle |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi leg |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg by coil spring (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BUMP STOP (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength UNDER ENGINE MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL BEFORE WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL BEFORE WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s door step |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f chassis |6.1.B.2| | 1 |
| Nearside Rear Body has a projection caused by corrosion within 30cm of a prescribed area |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion within 30cm of a prescribed area |6.1.C.1| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp With fog & indicator (4.2.3 (c)) | 1 |
| Offside Leaf spring fractured Rear eye let |2.4.B.1a| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength up by the alternator (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis,load valve (1.1.21 (e) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases Silencer |7.1.2| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Rear arm bush (5.3.4 (a) (i)) | 1 |
| Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure (6.1.7 (g) (ii)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp With brake & indicator (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Around rear spring hanger mounting - marked yellow (5.3.6 (a) (i)) | 1 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted No movement (1.1.17 (b)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering two holes / corrosion - marked yellow |6.1.1 |c| |ii|| | 1 |
| Front Fuel tank insecure Strap corroded & broken |7.2.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear mount covered in rubbery |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear mount area covered in rubbery underseal |5.3.6 |a| |i|| | 1 |
| Brake performance not tested parking brake not working |1.2.1 |g|| | 1 |
| Parking brake lever inoperative |1.1.6 |d|| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both rear inner sills holed at rear springs front mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger holed at rear spring rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member holed at rear spring rear mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner quarter panel holed at rear spring rear mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone rear inner bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn wishbone rear inner bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to front spring hanger |6.1.B.2| | 1 |
| Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above rear axle |6.1.B.2| | 1 |
| Steering system excessively tight when sat in vehicle, steering pump noisy aswell |2.2.D.1| | 1 |
| Power steering pump drive system defective noisy and restricting steering when in vehicle |2.3.6| | 1 |
| Nearside Hazard warning lamps inoperative front and rear |1.4.B.1b| | 1 |
| Nearside Body insecure and dangerous to other road users body bolt |6.1.B.1b| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS BOTH SIDES BY REAR ARM MOUNTING BUSH (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING BY TOP SUSPENSION LEG (5.3.6 (a) (i)) | 1 |
| Rear Other passenger door catch insecure DOORS BOTH SIDES (6.2.3 (c) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NERA LEAF SPRING MOUNTING (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEAR LEAF SPRING MOUNTING (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Unsatisfactory level of work carried out. Told customer to get it re done. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded box section by load sensing valve |3.3.A.2| | 1 |
| Emissions not tested due to exhaust leak |7.4.B.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner box section |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded outer box section |2.4.A.3| | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |wheel arch| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / box section area`s marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area`s marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg area`s marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected indicator to side light and brake light adversely affected |4.3.1 |b| |ii|| | 1 |
| Brake pivot excessively corroded and seriously weakened |3.5.1e| | 1 |
| Central Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp bad earth |1.1.A.3f| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Rear wheel arch holed |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear holed n/s quarter |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing adjacent to |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wish bone |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Inner/outer sill`s/chassis rail`s/inner wheel arch areas |holes| |2.4.A.3| | 1 |
| Offside Front Front suspension retaining device missing Drive shaft pin missing |2.5.A.4| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill area |2.4.A.3| | 1 |
| Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Body has a sharp edge caused by damage door mirror body |6.1.C.1| | 1 |
| Electrical wiring deteriorated and bare wires exposed towbar wiring |1.9.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis area |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear most (5.3.4 (a) (i)) | 1 |
| Offside Outer Front constant velocity joint gaiter missing |2.5.C.1a| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush de-bonded from arm (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing arch and turret holed and corroded within 30cm of shocker top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Rear fog lamp emits a light other than red when switched on shows white light through the reversing lamp |1.3.2e| | 1 |
| Nearside Rear Rear fog lamp emits a light other than red when switched on shows white light through the reversing lamp |1.3.2e| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings by frame mounting and suspension arm rear bush mounting |6.1.B.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d mounts |5.3.4 |a| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour Lamp damaged (4.4.3 (a)) | 1 |
| Floor excessively deteriorated tipper rear floor needs repairing |6.2.4 |a| |i|| | 1 |
| Nearside Front Outline marker lamp not working tipper body front |4.2.1 |a|| | 1 |
| Nearside Rear Outline marker lamp not working tipper body rear |4.2.1 |a|| | 1 |
| Offside Rear Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
| Floor in such a condition it is likely to cause load insecurity or instability pick up floor wood holed splitting and insecure for loads (6.2.4 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch 2 bits (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of inner sill (5.3.6 (a) (i)) | 1 |
| Headlamp aim beam image obviously incorrect both headlights suspect bulbs fitted incorrectly |1.8.A.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheelarch to sill corroded through |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/wheelarch corroded through under air filter box |6.1.B.2| | 1 |
| Body insecure and dangerous to other road users fo/s front bumper loose |6.1.B.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering limter valve has a plate welderd inadequate |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner and outter as filler |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner and outter as filler |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as filler |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis to inner wing |6.1.B.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings all welding is inadequate |6.1.B.2| | 1 |
| Nearside Front Upper Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint excessively worn also cover split (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded door step by sub frame mount |2.4.A.3| | 1 |
| Fuel system component leaking on top of engine possible injector pipe |7.2.3| | 1 |
| Exhaust system insecure rear mounting rubber broken |6.1.2 |a|| | 1 |
| Position lamp not working all position lamps (4.2.1 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outside of off side rear chassis rail area above axle (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outside of near side rear chassis rail area above axle (5.3.6 (a) (i)) | 1 |
| Steering linkage ball joint has excessive play near side steering rack inner drumstick joint (2.1.3 (b) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner wheel arch (6.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt flexible stalk damaged Loose |7.1.2 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outer (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outer (6.1.1 (c) (i)) | 1 |
| Nearside Steering linkage ball joint modified such that the steering is adversely affected rack end |2.1.3 |f| |ii|| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill front to back |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to back |6.1.B.2| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced above leaf spring (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step corroded and strength reduced (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded NSR inner wheelarch to floorpan |2.4.A.3| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp side light and stop wrong |1.2.1f| | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (marked) (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (marked) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring shackle bracket fractured (5.3.1 (b) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury door mirror body (6.2.1 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer seal |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Seal behind wheel |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Seal |6.1.B.2| | 1 |
| Front Fuel tank insecure strap corroded through (6.1.3 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced affected by an other light |4.2.3 |a| |ii|| | 1 |
| Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill and step repaired with tape and mastic not welded (6.1.1 (d) (i)) | 1 |
| Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced step repaired with tape and mastic not welded (6.1.1 (d) (i)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering subframe and chassis mounting (6.1.1 (c) (ii)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside and offside inner wings (6.1.1 (c) (i)) | 1 |
| Rear Towbar component excessively corroded rear cross member heavily corroded (6.1.6 (a)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced the hole vehicle is suffering with extensive corosion (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch/floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision step underside |7.1.1 |a| |ii|| | 1 |
| Offside Rear Drivers door does not latch securely closed (6.2.3 (a)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear wheel large (5.3.6 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is fractured and functionality of the braking system is affected Both rear (1.1.21 (e) (ii)) | 1 |
| Parking brake inoperative on one side Both rear (1.4.1 (a)) | 1 |
| Offside Front Ball joint has excessive play steering arm inner ball |2.2.B.1f| | 1 |
| Exhaust system not adequately supported back box tail pipe |7.1.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed in 3 places, near to suspension and outriggers, all chalked up |6.1.B.2| | 1 |
| Oil leaking excessively from engine engine area |8.4.1 |a| |i|| | 1 |
| Central Prop shaft bearing excessively worn both center bearings |6.1.7 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger |6.1.1 |c| |i|| | 1 |
| Position lamp lens seriously defective both rear lamps |4.2.1 |b|| | 1 |
| Offside Indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases box |7.1.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side sill |6.1.B.2| | 1 |
| Nearside Inner Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Central Rear Inner Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner and outer front to rear (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower sill front to rear inner and outer (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quater flitch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quater (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill front to rear (6.1.1 (c) (i)) | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill front to rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quater (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quatre (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides inner wheel arches (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner wheel arches (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner steps (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under Door Step |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Under Floor To Inner Sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Under Inner Sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Outer Door Step / Sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis Weakened By Corrosion |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Weakened By Corrosion |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner Under Sill In 2 Places |5.2.6| | 1 |
| Rear Body component corroded and likely to cause injury as maked |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength at rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount area as marked x 2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area as marked x 2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor at chassis as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at inner and outer rear sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chaasis at inner sill below seat belt mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to inner sill area below driver step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger area as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount at floor as marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill area corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis as shock mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at shock mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings between spring hanger and rear valance corner |6.1.B.2| | 1 |
| Central Front Fluid leak harmful to the environment or a risk to other road users diesel (8.4.1 (a) (i)) | 1 |
| Central Rear Fuel pipe insecure (6.1.3 (a) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded (2.1.2 (e) (i)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Front Leaf spring fractured |2.4.B.1a| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outer sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner arch near floor corroded (5.3.6 (a) (i)) | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp rear fog |1.2.1f| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner sill/step |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering mid |6.1.A.1| | 1 |
| Offside Rear Body has a projection caused by corrosion wheel arch lower |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body out rigger and chassis rail as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind bumper (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch x3 (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step inside arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Inner wheel arch areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch areas |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour holed |4.4.3 |a|| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn prop shaft |2.4.G.4d| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis, outrigger, inner sill, outer sill, |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis, outrigger, inner sill, outer sill. |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement the rear bush on arm |2.4.G.2| | 1 |
| Nearside Rear position lamp|s| incorrect colour lens damaged |1.1.A.3e| | 1 |
| Nearside Rear Oil leaking excessively from transmission half shaft seal. (8.4.1 (a) (i)) | 1 |
| Rear Brake hose kinked |3.6.B.4b| | 1 |
| Inner Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and inner wing |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside and nearside above axle |6.1.B.2| | 1 |
| Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arches and floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened chassis and outriggers at front mount and rear mount |5.3.1 |b| |i|| | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Body component corroded and likely to cause injury inner and outer sill at step |6.2.1 |a| |i|| | 1 |
| Fluid leak harmful to the environment or a risk to other road users diesel leak from engine |8.4.1 |a| |i|| | 1 |
| Body has a projection caused by corrosion offside and nearside sills,inners and arches |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Several places |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Several places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Several places |2.4.A.3| | 1 |
| Nearside Rear Brake valve insecurely mounted Chassis corroded and holed near valve |3.6.A.2a| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion bumper / doorstep |6.1.C.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear leaf spring rear mounting areas |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floosr / inner flitches |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill & inner sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut turret / inner wing |2.4.A.3| | 1 |
| Nearside Seat belt retracting mechanism defective seat belt jammed |5.2.5b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg area`s marked in yellow | engine mount area`s | |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill / box section area`s marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis leg area`s within shock absorber mounting area`s marked in yellow |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area`s marked in yellow |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured anchor eye marked in yellow |2.4.B.1a| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member area`s marked in yellow |6.6.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch marked in yellow |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded marked in yellow spring mount area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step area marked in yellow |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step area marked in yellow |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill marked in yellow |5.2.6| | 1 |
| Front Fuel system component leaking Top of engine area |7.2.3| | 1 |
| Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassi leg (marked ) (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie inside by top shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded lower inner step |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill middle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shackle 5 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by spring |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch 4 places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wheel arch 6 places |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by spring hanger split |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded box section by shocker |2.4.A.3| | 1 |
| Driver`s door pillar insecure |6.2.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill + door shut |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill
|2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded crossmember and inner sill |2.4.A.3| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp light interaction between various rear lights |1.4.A.2h| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |chalked| |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |chalked| |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch/ chassis |chalked| |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded all 4 wheel arch |2.4.A.3| | 1 |
| Nearside Front Position lamp not working side marker |4.2.1 |a|| | 1 |
| Offside Upper Outline marker lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured on chassis behind cab |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured on chassis behind cab |5.2.6| | 1 |
| Nearside Brake cable has wires broken and is significantly weakened broken |3.5.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/under-sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis to rear crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to crossmember |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded foward |2.4.A.3| | 1 |
| Offside Front brake caliper has restricted free movement siezed |3.5.1k| | 1 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength under inner wing area |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner underwing area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength within 30cms of rear spring hanger |2.4.A.3| | 1 |
| Offside Steering arm damaged and unserviceable drum stick |2.2.C.1d| | 1 |
| Headlamp aim beam image obviously incorrect N/S |1.8.A.1b| | 1 |
| Stop lamp not working O/S |1.2.1b| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc N/S/F |2.5.C.1a| | 1 |
| Front wheel bearing rough when rotated O/S/F |2.5.A.2| | 1 |
| Front suspension has excessive play in a lower suspension ball joint BOTH SIDE FRONTS |2.5.B.1a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/F UNDER BONNET CHASSIS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S AND O/S UNDER SILLS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR CROSSMEMBER |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S AND N/S REAR CHASSIS.... FRONT OF SPRING.... |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S AND N/S OUTER REAR CHASSIS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S AND N/S REAR INNER WINGS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S AND O/S FRONT INNER WINGS AND CHASSIS |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill corroded |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded area of rear outrigger |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired nearside inner sill |5.2.6| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Headlamp not working on main beam dull |1.7.5a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over axle |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i)) | 1 |
| Nearside Rear position lamp|s| incorrect colour showing white light through a damaged lense |1.1.A.3e| | 1 |
| Nearside Stop lamp emits other than a steady red light showing white light through a damaged lense |1.2.1e| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear-most outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Brake actuating linkage mounting prescribed area is excessively corroded chassis leg |3.3.A.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outrigger close to rear leaf spring front mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outrigger close to rear leaf spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch in multiple places |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement MARKED YELLOW |2.4.G.2| | 1 |
| Central Seat belt buckle not functioning as intended N/S MARKED YELLOW |7.1.2 |d|| | 1 |
| Central Seat belt locking mechanism does not secure or release ALL |5.2.5a| | 1 |
| Central Seat belt buckle not functioning as intended n/s ( marked yellow) (7.1.2 (d)) | 1 |
| Offside Rear Seat belt buckle not functioning as intended marked yellow (7.1.2 (d)) | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened rear |2.4.B.6d| | 1 |
| Power steering inoperative notchy when turning steering wheel |2.3.3a| | 1 |
| Offside Outline marker lamp not working both front and rear |4.2.1 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie leg with in 30 cm of engine bracket |6.1.1 |c| |ii|| | 1 |
| Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both rear inner sills with in 30cm of springs |5.3.6 |a| |ii|| | 1 |
| Power steering component|s| leaking rack area and reservoir low |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valance near spring mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outside of chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outside of chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of sill |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp damaged |1.1.A.3f| | 1 |
| Nearside Front Trailing arm has excessive play in a pin/bush (2.4.G.2) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded within seat base area |5.2.6| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced holes in bulkhead - outrigger (6.1.1 (c) (i)) | 1 |
| Braking system leaking front - rear pipe |3.6.A.1| | 1 |
| Brake cable damaged Front handbrake cable (1.1.15 (a)) | 1 |
| Brake performance not tested Parking brake (1.2.1 (g)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear brake load sensing valve |6.1.A.1| | 1 |
| Front Seat belt webbing significantly weakened Centre |7.1.2 |b| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |multiple areas| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis next to shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis / inner wheel arch |2.4.A.3| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s spring mount |5.3.6 |a| |i|| | 1 |
| Exhaust system not adequately supported downpipe to centre clamp |7.1.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s leaf spring rear mounting |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s leaf spring front and rear mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Osr outer sill corroded 30cm from osr spring front mounting |2.4.A.3| | 1 |
| Trailer electrical socket likely to become detached +damaged (4.10 (a) (ii)) | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting marked yellow chalk (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength marked yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to mounting area marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel archarea in 2 places marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to step area marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Supplementary restraint system warning lamp indicates a fault taken out at time of test bye scanner |7.1.6 |a|| | 1 |
| Nearside Rear fog lamp missing |1.3.2a| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill not attatched |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring shackle bracket damaged and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Front Steering locking device insecure lock nut for track rod |2.2.C.1g| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis rail |6.1.A.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member | offside and nearside| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wing area |by shock absorber mounting| |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine turbo/ none turbo |7.4.B.3b| | 1 |
| Nearside Front front brake binding sticking on / off |3.7.B.1| | 1 |
| Nearside rear brake recording little or no effort foot and hand brakes |3.7.B.5a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassies/ inner wing area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired floor |by shock absorber mounting| |2.4.A.3| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shockabsorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock absorber |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill corroded away |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings iner sill |6.1.B.2| | 1 |
| Offside Front Direction indicator adversely affected by the operation of another lamp rear pos. lamp |1.4.A.2h| | 1 |
| Offside Lower Front suspension has excessive play in an outer ball joint bottom ball joint |2.5.B.2a| | 1 |
| Front Front position lamp|s| not working Both |1.1.A.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear quarter panel behind wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger behind wheelarch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner rear quarter panel / chassis outrigger behind wheelarch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner rear panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wheelarch to load bay floor rear edge of repair |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner wheelarch to load bay floor rear edge of repair |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner edge of door step |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step two patches - chalked (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step - chalked (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting - chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near strut - chalked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mounting - chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength heel arch (5.3.6 (a) (i)) | 1 |
| Offside Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 1 |
| Seat belt anchorage prescribed area is excessively corroded floor behind cab |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded parking brake cable mount |3.1.9| | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing side stitching torn |5.2.2a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor pan under drivers chair |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear bulk head passenger side |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Off side bulkhead behind drivers chair |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Central chassis |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in side arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in side arch |5.3.6 |a| |i|| | 1 |
| Direction indicator adversely affected by the operation of another lamp Rear indicators affecting all other rear lights - brake lights, side lights, reverse light, fog light. (4.4.3 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill end (5.3.6 (a) (i)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Nearside Headlamp light intensity severely reduced No pattern (4.1.4 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering rail |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Lower Shock absorbers has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Rear Lower Shock absorbers has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Braking system leaking pipe burst |3.6.A.1| | 1 |
| Headlamp switch faulty switchs headlamps off when main beam applied |1.7.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis multiple |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis multiple |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting chassis |6.6.6| | 1 |
| Power steering ram leaking (2.1.5 (a)) | 1 |
| Rear Body insecure and dangerous to other road users chassis extension bolts loose |6.1.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted riggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded riggers |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle sliding door. Door opened on prechecks but would not open during test |6.2.B.1c| | 1 |
| Nearside Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Brake pipe likely to become detached or damaged flexi (1.1.11 (d) (ii)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of cab |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn eye in roll bar worn and elongated (5.3.4 (a) (i)) | 1 |
| Power steering pipe/hose leaking from rack (2.1.5 (a)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i)) | 1 |
| Outline marker lamp not working both rear (4.2.1 (a) (ii)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength side panel by leaf spring anchor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength side panel by leaf spring shackel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor /wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner sill holed |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring hanger |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Rear fog lamp insecure |1.3.2a| | 1 |
| Front Side repeater insecure |1.4.A.2b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step top |5.2.6| | 1 |
| Nearside Brake pipe inadequately supported Both front to rear |3.6.B.1| | 1 |
| Electrical wiring insecure Front to rear under body, also winch wiring |1.9.2a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cab (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cab (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill rear of cab (7.1.1 (a) (i)) | 1 |
| Offside Front Coil spring missing and directional control affected not sitting correctly (5.3.1 (c) (ii)) | 1 |
| Oil leaking excessively from transmission oil leaking on exhaust (8.4.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded UPPER STEP |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded OUT RIGGER |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded OUT RIGGER |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded and osf outer sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front spring mounting |5.3.6 |a| |i|| | 1 |
| Centre Front Upper Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Rear Lower Direction indicator not working |1.4.A.2c| | 1 |
| Body insecure and dangerous to other road users rear light board/bumper |6.1.B.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom of chassis corroded through next to front subframe mounting |6.1.B.2| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear anti-roll bar bushes |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced LEG (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced LEG (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING SECTION (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases SILENCER (6.1.2 (a)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill area
|2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis frame |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor to wheel arch repaired with filler |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired floor to inner wheel arch repaired with filler |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired rear multiple welding repairs not seem welded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired multiple welded repairs not seem welded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired multiple welded repairs not seem welded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inside front wheel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded above front wheel |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by load valve (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by suspension arm mounting (6.1.1 (c) (i)) | 1 |
| Nearside Inner Rear Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Nearside rear |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Offside rear |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Offside rear |front mount| |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Nearside rear |front and rear mounts| |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded Offside front |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement back bush |2.4.G.2| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step/inner sill corroded within a seat belt anchor point. |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step corroded within a seat belt anchor point. |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSSIS HOLED (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil |5.3.6 |a| |i|| | 1 |
| Offside Rear position lamp|s| incorrect colour lens showing white light |1.1.A.3e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis x member x 2 |2.4.A.3| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded x/member |3.1.9| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded cab floor |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis by brake hose mount |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is deliberately modified which significantly reduces the original strength X MEMBER BACK OF CAB |3.1.9| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Rear Lower Leaf spring splayed and fouling |2.4.B.1c| | 1 |
| Offside Rear Lower Leaf spring splayed and fouling |2.4.B.1c| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Offside Front Bonded suspension unit deteriorated and cannot function as intended back |2.4.F.3| | 1 |
| Offside Front Upper Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Nearside Front Upper Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Central Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Offside Rear Exhaust system not adequately supported Support rubber deteriorated |7.1.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion through out front to back (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step |underside of vehicle| |5.2.6| | 1 |
| Front Windscreen wiper blade missing |6.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Passengers seat insecure 2nd to last row (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Seat belt buckle missing 2nd to last row (7.1.2 (d)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill /step area as marked (7.1.1 (a) (i)) | 1 |
| Outer Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Prop shaft bearing housing insecure rubber split |6.1.7 |f| |i|| | 1 |
| Offside Rear brake drum locking device missing |3.5.1l| | 1 |
| Nearside Front Brake back plate|s| securing device loose |3.5.1j| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by spare wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded buy spare wheel |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear tipper body |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under carriage of tipper body o/s and n/s |6.1.B.2| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp FOG light brings on OS Indicator bulb static at same time as fog |1.3.2f| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill Holed |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill Holed |6.1.B.2| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Split |2.4.G.2| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Split |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill within 30cm of seatbelt |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill within 30cm of rear spring mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill within 30cm of spring mount |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear inner and outer sills |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear inner and outer sills |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch area |6.1.B.2| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to back (6.2.2 (d) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing corroded (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/rear crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shassis/rear crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired subframe mounting point, split (5.3.6 (a) (i)) | 1 |
| Central Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front Headlamp are incorrectly positioned |4.1.4 |a|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner and outer sills, n/s door step, n/s/r inner wheel arch, o/s/f/ wing, rear step. heavy corrosion throughout. (6.1.1 (c) (i)) | 1 |
| Nearside Rear brake drum excessively scored |3.5.1h| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill
|5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Rear Brake performance not tested bind (1.2.1 (g)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch behind suspension leg marked yellow (6.2.2 (d) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded Above column between chassis and body (2.1.2 (e) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Lower arm rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is severely distorted chassis corroded |2.2.C.1h| | 1 |
| Emissions not tested exhaust holed and unsupported |7.3.A.1| | 1 |
| Brake performance not tested both rear wheels severe binding |3.7.A.1| | 1 |
| Rear Trailer electrical socket |13 pin| not operating the trailer lamps as intended 7 pin socket |1.9.4| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Trailling bush. |2.4.G.2| | 1 |
| Offside Ball joint has excessive play track rod end |2.2.B.1f| | 1 |
| Rear Rear reflector not red in colour |1.5.1d| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure rear mounting bolt loose |2.4.G.1| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arch marked yellow chalk |6.1.B.2| | 1 |
| Nearside Outer Front Upper Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Outer Front Upper Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shock tower (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded TWO CROSSMEMBERS ABOVE REAR AXLE |2.4.A.3| | 1 |
| Rear position lamp|s| not working N/S AND O/S |1.1.A.3b| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill/step (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (wheel arch) (6.2.2 (d) (i)) | 1 |
| Rear Electrical wiring damaged, likely to cause a short tow bar wiring |1.9.2b| | 1 |
| Fuel tank insecure Strap Broken (6.1.3 (a) (i)) | 1 |
| All outline marker lamps not working |4.2.1 |a| |ii|| | 1 |
| Nearside Front Headlamp not working on dipped beam aim not checked |1.7.5a| | 1 |
| Nearside Rear rear brake recording little or no effort back plate wet |3.7.B.5a| | 1 |
| Offside Position lamp not working Side light (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting area |2.4.A.3| | 1 |
| Nearside Rear Lower Leaf spring longitudinally displaced |2.4.B.1d| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached bolt missing (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn bolt loose (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement Dbush |2.4.G.2| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded rear door sill |5.2.6| | 1 |
| Offside Front Position lamp not working sidemarker (4.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill of step area marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill of step area marked with chalk (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill of cab marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill of cab marked with chalk (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis outrigger marked with chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Front Position lamp not working WING |4.2.1 |a|| | 1 |
| Offside Front Position lamp not working WING |4.2.1 |a|| | 1 |
| Offside Front Side repeater not working WING |4.4.1 |a| |ii|| | 1 |
| Vehicle Identification Number has more than one different number displayed |0.2 |c|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, within 30cm of prescribed area (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush anti roll bar d bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush anti roll bar d bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush anti roll bar drop link |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush anti roll bar drop link |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill under side door |6.1.B.2| | 1 |
| Rear Rear wheel bearing rough when rotated both rear |2.6.1| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded multiple marked up areas |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded multiple marked up areas |2.4.A.3| | 1 |
| Offside Front Outer Drive shaft joint so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s/r sill area |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s/r sill area |6.2.2 |d| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near bump stop |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded wing |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked with chalk |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked with chalk |6.1.1 |c| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired Complete sill |5.3.6 |a| |i|| | 1 |
| Offside Outer Suspension component mounting prescribed area is inadequately repaired Complete sill |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired Complete sill |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired Complete sill |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases corroded |7.1.2| | 1 |
| Exhaust system not adequately supported cvorroded |7.1.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded doorstep various places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill leafspring mount |2.4.A.3| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both out rigger |6.1.1 |c| |i|| | 1 |
| Offside Front Body modification likely to adversely affect braking or steering |6.2.1 |d| |ii|| | 1 |
| Offside Body modification likely to adversely affect braking or steering inner sill |6.2.1 |d| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Brake cable has wires broken and is significantly weakened rubbing on rear os |3.5.1b| | 1 |
| Prop shaft bearing excessively worn BOTH BEARINGS (6.1.7 (b) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded Nearside step |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inside wheel arch and top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inside wheel arch and top |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and inside wheel arch by front spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and chassic by rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and inside wheel arch by front spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and chassic by rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inside rear wheel arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inside rear wheel arch |5.2.6| | 1 |
| Nearside Headlamp aim beam image too far to the left |1.6.4| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and o/s inner wheel arches |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underneath 14 places corroded and holed |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill & inner sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill & inner sill |5.2.6| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasis area x 4 holes |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasis area x 3 holes |6.1.B.2| | 1 |
| Brake cable insecure cab underside hand brake cable not properly located and fouling |1.1.15 |c|| | 1 |
| Front Seat belt anchorage prescribed area is inadequately repaired offside/nearside rear of cab not fully WELDED |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring shackle pin or bush likely to become detached forward and rear bolts loose |5.3.4 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired step to inner arch |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing infront of shock |2.4.A.3| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded Strut tower |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded Strut tower/ inner wing |2.4.A.3| | 1 |
| Seat belt flexible stalk cable has broken strands |5.1.B.5b| | 1 |
| Seat belt insecurely fixed to the seat |5.1.B.2a| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings corroded and cracked near compensator valve |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail corroded and holed near o/s front strut |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step corroded and holed within 30 cm of seat/belt mountings |6.1.B.2| | 1 |
| Central Drive shaft bearing excessively worn yellow chalk marked |6.1.7 |b| |i|| | 1 |
| Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded drivers front inner body sillat step area |5.2.6| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering off/side rear (6.1.1 (c) (ii)) | 1 |
| Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected off/side front (5.3.6 (a) (ii)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/side inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mounting (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mounting (5.3.6 (a) (ii)) | 1 |
| Offside Side repeater incorrect colour (1.4.A.2f) | 1 |
| Offside Front coil spring broken (2.4.C.1a) | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2) | 1 |
| Centre Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Nearside Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Offside Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s rear inner and outer sill |leaf spring shackle mount| |2.4.A.3| | 1 |
| Offside Upper Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Top of chassis leg |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail & out rigger behind subframe |6.1.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch below passenger step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SPRING HANGER (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Inner Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/f inner sill |step area| |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/f inner sill area |step area| |5.2.6| | 1 |
| Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above bump stops
|6.1.B.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central lower sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Body component damaged and likely to cause injury door mirror |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sills at front end of spring |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded wheelarch near shock absorber mounting |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill area and rear wheel arch |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill area |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both inner sills |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch suspension mounting area |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross over brace |6.1.B.2| | 1 |
| Offside Front Body insecure and dangerous to other road users Bumper corner |6.1.B.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under sill by step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under sill by step |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by fuel tank |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings opposite fuel tank |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded by spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded by spring |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by brake component |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring front bush |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring back bush |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring front bush |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring rear bush |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by shocker |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by shocker |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill by chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill by chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill by step |6.1.B.2| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OS+NS Chassis (6.2.2 (d) (i)) | 1 |
| Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Brake performance not tested oil dripping from engine |3.7.A.1| | 1 |
| Emissions not tested oil dripping from engine |7.3.A.1| | 1 |
| Offside Rear Brake pipe likely to become detached or damaged insecure (1.1.11 (d) (ii)) | 1 |
| Braking system leaking main brake pipe |3.6.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front spring mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded innersill in several places
|5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill in several places
|5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill to arch |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded next to spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill to arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner panal/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch
|2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering side of fuel tank
|6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under side of chassis
|6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger/inner panal and sill
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting bracket |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides outriggers |front hangers | |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear inner wheel arches |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal input shaft on steering rack |2.3.3b| | 1 |
| Offside Rear Upper Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded inner snd outer sill |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Both side to rear inner sill |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring front mount both side inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced By the upper shoker mount |6.1.1 |b| |ii|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both side inner wheel arche by the coil spring mount |5.3.6 |a| |i|| | 1 |
| Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arche both sides shoker mount area |5.3.6 |a| |i|| | 1 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view loose |8.1.2a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring inner wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring inner sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring inner & outer sill area |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step floor area |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step floor area |5.2.6| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Front To Rear |6.2.2 |d| |i|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Front To Rear |6.2.2 |d| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Front To Rear |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Front To Rear |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch Area Rear |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch Area Front |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch Area Front |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Area |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Area |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under Rear Bumper |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under Rear Bumper |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view main mirror |3.3 |b| |ii|| | 1 |
| Offside Rear Leaf spring eye defective |anchor| front |2.4.B.1b| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings floor above axle |6.1.B.2| | 1 |
| Brake performance not tested due to hand brake cable missing |3.7.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top damper mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg in wheel arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg in wheel arch |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of spring |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired under arch (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member several places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under rear arch (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill by seat belt |5.2.6| | 1 |
| Offside Rear Leaf spring fractured front eye broken (5.3.1 (b) (i)) | 1 |
| Steering column flexible coupling retaining device missing |2.1.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced BOTH N/S & O/S FRONT OUTER/INNER SILLS/STEP AREAS |7.1.1 |a| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded CROSS MEMBER ABOVE FUEL TANK |1.1.21 |e| |i|| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember above fuel tank |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre crossmember |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Rear Body has a sharp edge caused by corrosion bumper on ends |6.1.C.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded upper suspension turret |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner and outer front sill |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear of arm |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear of arm |2.4.G.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shock absorber mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shock absorber mount (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floors (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured single leaf |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor above rear axle (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/bodymount (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/body m,ount (6.1.1 (c) (i)) | 1 |
| Brake performance not tested due to leaking pipe (1.2.1 (g)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch by chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch chassis leg |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill besides out rigger |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded lower quarter panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded lower quarter panel |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement lower arm bush |2.4.G.2| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing next to brake servo mounting |3.6.C.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Near Spirng Rear Mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Near Spring Front Mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r spring mounting, both at the front and rear of spring |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded front mounting of o/s/r spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake lagging in operation slow to fully release |1.2.1 |d|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp all bulbs (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step near seat mountings (7.1.1 (a) (i)) | 1 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |3.1.9| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab (6.2.2 (d) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering rear chassis (6.1.1 (c) (ii)) | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering rear chassis (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected door step (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected door step (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 1 |
| Offside Leaf spring shackle pin or bush likely to become detached u bolts incorrectly fitted (5.3.4 (a) (ii)) | 1 |
| All outline marker lamps not working roof (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step as marked |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step as marked |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Rear Brake pipe fouled by moving parts on exhaust at rear |3.6.B.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor as marked |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill as marked |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported pipe |7.1.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion as marked |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by damage side door handle |6.1.C.1| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture burst during brake test (1.1.11 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch / chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting (6.1.6 (i) (i)) | 1 |
| Brake performance not tested pipe burst at start of test (1.2.1 (g)) | 1 |
| Headlamp insecure Both headlamps top mounting screws missing |1.7.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber and chassis rail bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer body sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor and inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor and inner wheel arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis rail
|6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner 1/4 panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner 1/4 panel |2.4.A.3| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 2 |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 2 |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x 2 |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength both mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both mountings (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill, at leaf spring front and rear mount |2.4.A.3| | 1 |
| Steering lock stop loose |2.2.D.2c| | 1 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| track rod end |2.2.A.1b| | 1 |
| Offside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill rear |6.1.B.2| | 1 |
| Offside Outer Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Xmember |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced spring mount |6.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i|| | 1 |
| Offside Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi rail |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/outrigger |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/outrigger |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rear of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rear of spring |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Outter sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outter sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Nearside Rear Leaf spring modified and seriously weakened Bump stop missing |2.4.A.2| | 1 |
| Offside Rear Leaf spring inappropriately repaired Bump stop missing |2.4.A.2| | 1 |
| passenger door cannot be opened from outside the vehicle Bonnet |6.2.B.1c| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting |5.3.6 |a| |i|| | 1 |
| Brake pedal anti-slip provision missing pedal rubber |3.3.A.1b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear corner under vehicle |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded offside outer sill at front and along inner sill under vehicle |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal Pipes into rack leaking |2.3.3b| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt swivel boot |2.4.G.2| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded arch area |2.4.A.3| | 1 |
| Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch and step areas both sides several places |6.1.A.1| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor both sides (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chases next to cab (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced box section near fuel tank (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wing/floor marked yellow (7.1.1 (a) (i)) | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering hand brake fixing area |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side front |6.1.B.2| | 1 |
| Nearside Front Macpherson strut mounting likely to fail |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced chassis to floor as marked rear |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced from chassis to spring shackle mounting |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in chassis as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Floor excessively deteriorated inner wheel arch to floor as marked |6.2.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced over rear spring as marked |6.1.1 |b| |ii|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced spring mounting as marked |6.1.1 |b| |ii|| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL, MARKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings MIDDLE SILL, MARKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP, MARKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP, MARKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER OF WHEEL ARCH, MAKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER OF WHEEL ARCH, MARKED WITH YELLOW CHALK |6.1.B.2| | 1 |
| Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt REAR WISHBONE BUSH |2.4.G.2| | 1 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt REAR WISHBONE BUSH |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, various |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis, various |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis, 2x places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Nearside Front Lower Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded In two places |2.4.A.3| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill |6.1.1 |c| |i|| | 1 |
| Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floors |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing arch |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting rear panel |6.6.6| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing bumper loose |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded mid |5.2.6| | 1 |
| Nearside Body has a sharp edge caused by corrosion c.post |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion c post |6.1.C.1| | 1 |
| Nearside Rear All position lamps not working body |1.1.A.3b| | 1 |
| Offside Rear All position lamps not working body |1.1.A.3b| | 1 |
| Nearside All position lamps not working side body |1.1.A.3b| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill to chassis |5.2.6| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 2 cross members |6.1.B.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush nearside & offside rear centre d bushes |2.4.G.2| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bush nearside rear link bush |2.4.G.2| | 1 |
| Prop shaft bearing excessively worn front centre bearing |6.1.7 |b| |i|| | 1 |
| Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
| Exhaust system not adequately supported Rear bracket broken |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember. |2.4.A.3| | 1 |
| Rear reflector missing BOTH |1.5.1a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top of | under bonnet| |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel / chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner panel / chassis |2.4.A.3| | 1 |
| Offside Front Body component corroded and likely to cause injury on wing |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced to outer sill |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Offside Front Outer Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Nearside Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Outer Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Front Coil spring mounting corroded and seriously weakened inner wing |2.4.C.3c| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |inner wing| |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |inner wing| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut housing inner wing/arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut housing inner wing/arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to chassis |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to chassis |6.1.B.2| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded and outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s and n/s/r outriggers |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outline marker lamp lens seriously defective lens missing |4.2.1 |b|| | 1 |
| Offside Rear Brake lining|s| contaminated Hub seal leaking |1.1.13 |b|| | 1 |
| Offside Outline marker lamp with a multiple light source more than 1/2 not functioning |4.2.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sillstep (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Offside Rear Upper Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine 3.96% |7.4.B.3b| | 1 |
| Nearside Front Steering pivot point has excessive play top suspension mount has play |2.2.B.1g| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rails excessively corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch chassis leg |6.1.B.2| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheelarch and inner sill to step |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion sill corroded |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion sill corroded |6.1.C.1| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2 (7.1.1 (a) (i)) | 1 |
| Offside Rear Brake pipe kinked AT WHEEL CYLINDE |3.6.B.2b| | 1 |
| Offside Outer Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both chassis tops in engine bay (5.3.6 (a) (i)) | 1 |
| Vehicle structure has a fracture which is likely to adversely affect braking or steering both sides behind cab (6.1.1 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner arches (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg near brake hose |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near top shock mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near top shock mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis near leaf spring. rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis near leaf spring. rear mounting |2.4.A.3| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside |6.1.B.2| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill corroded front to back (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill corroded front to back. (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Chassis railing corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting corroded. (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill various places |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheelarch |6.2.2 |d| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill several places |6.2.2 |d| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel inner arch |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor section |5.2.6| | 1 |
| Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting all rear crossmember |6.6.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail; |6.1.1 |c| |ii|| | 1 |
| front brakes release unevenly offside very slow |3.7.B.4| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear chassis at rear cross member |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear inner wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear chassis at shockabsorber mounts |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting N/S INNER SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Direction indicator not working Broken
|1.4.A.2c| | 1 |
| Offside Rear fog lamp not working Broken |1.3.2b| | 1 |
| Body insecure and dangerous to other road users Bothside |6.1.B.1b| | 1 |
| Nearside Front brake disc insecure Broken |3.5.1i| | 1 |
| Offside Front Body has a projection caused by damage wing/bumper insecure |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 30cm from suspension spring hanger |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill panel |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill panel |6.1.B.2| | 1 |
| Nearside Rear Lower Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Outline marker lamp does not illuminate simultaneously with the position lamps x 2 (4.2.2 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill to body (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill to body (7.1.1 (a) (i)) | 1 |
| Rear Service brake excessively fluctuating both drums (1.2.1 (e)) | 1 |
| Rear Service brake excessively binding both drum brakes (1.2.1 (f)) | 1 |
| Offside Track rod end seriously misaligned |2.1.3 |e|| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing as mark |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing 2 places as mark |6.1.B.2| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step & sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked |6.1.1 |c| |i|| | 1 |
| Brake prescribed area is excessively corroded and functionality of the braking system is affected lsv (1.1.21 (e) (ii)) | 1 |
| Offside Front Brake prescribed area is excessively damaged and functionality of the braking system is affected brake hose area (1.1.21 (e) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected x2 (5.3.6 (a) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside door x2 |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner an outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch/flitch |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel under engine mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Direction indicator missing |1.4.A.2b| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 3 |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and inner step. |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis next spare wheel |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member rear spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides of cross member rear spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured front eye (5.3.1 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill several places |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded back valance |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both sides |6.1.A.1| | 1 |
| Electrical wiring damaged, likely to cause a short trailer plug |1.9.2b| | 1 |
| Nearside Rear Brake valve leaking fluid leaking from n/s/r brake drum (1.1.7 (d) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn n/s/f lower suspension arm rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Macpherson strut insecurely attached fixing to Hub loose (5.3.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor area close to shock absorber |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring hanger |6.1.1 |c| |i|| | 1 |
| All position lamps not working FRONT AND REAR - OFF-SIDE AND NEAR-SIDE |1.1.A.3b| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded DOOR STEP UNDER VEHICLE |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded SILL SECTION |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded OUT-RIGGER BY ROAD SPRING |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH TO CHASSIS |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH TO CHASSIS |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting all under body |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and floor |5.3.6 |a| |i|| | 1 |
| Offside Front Wheel stud hole elongated |4.2.A.1d| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded front most mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front most mount inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most mount |2.4.A.3| | 1 |
| Offside front brake binding after application |3.7.B.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is severely distorted Inner wing
|2.4.A.3| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outriggers |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area |6.2.2 |d| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shackle mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shackle mount |6.1.1 |c| |i|| | 1 |
| Front Anti-roll bar pin or bush excessively worn d bushes |5.3.4 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner sill/leaf spring mounted areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear mounting areas in NUMEROUS places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Front and rear mounting areas in NUMEROUS places |2.4.A.3| | 1 |
| Fuel system component leaking pump ? |7.2.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded INNER AND OUTER SILL |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre x member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerwing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis top |2.4.A.3| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill near support brace |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill underneath sliding door |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassi in 2 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill and undersill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill and undersill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of wheelarch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of wheel |6.1.B.2| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp effected with indicator |1.1.A.3f| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Upper wing corroded in 2 places |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded in 2 places |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded in middle section |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Wishbone arm |rear| bush |2.4.G.2| | 1 |
| Nearside Rear Leaf spring main leaf fractured Front of mounting (5.3.1 (b) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor within 30cms of seat mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis (6.1.6 (i) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis (6.1.6 (i) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Panel (6.1.6 (i) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger within 30cms of Spring mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger within 30cms of Spring mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch With in 30cms of brake pipe mounting and upper shock absorber attachment (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch With in 30cms of upper shock absorber attachment (6.2.2 (d) (i)) | 1 |
| Offside Front Track rod end seriously misaligned Locking nut loose (2.1.3 (e)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis cross section/ spare wheel mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 1 |
| Towbar component insecure Bolts missing |6.6.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassiss |6.1.A.1| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe (6.1.2 (a)) | 1 |
| Centre Sub-frame cracked |2.4.G.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front chassis legs on all sides |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to rear crossmember |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill, full length |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill full length |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both front steps |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger, corrosion |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mount area, inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine mount area ,inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced end of sill /inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above spring (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of offside rear spring mounting (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of nearside rear spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |centre| out rigger floor/wheel arch. |5.3.6 |a| |i|| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Seal |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Seal |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rail marked in white chalk |6.1.B.2| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Flinch Panel |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill at wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill incomplete repair |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING BADLY HOLED (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG HOLED AT SHOCKER MOUNTING (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG HOLED AT SHOCKER MOUNTING (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at spring anchor |5.3.6 |a| |i|| | 1 |
| Rear Leaf spring fractured both |5.3.1 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind shock (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie looking through wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring hanger mount. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring hanger mount. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring hanger mount. |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/wing |seen under bonnet|. |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/wing |seen under bonnet|. |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |seen under bonnet|. |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |seen under bonnet|. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering as marked |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering as marked |6.1.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill holed, under seat area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area, several |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases mid section box holed and corroded |7.1.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced +damage (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger x2 (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger x2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced foot step (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/chassis |step area| |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, engine compartment area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch areas |several| |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch areas |several| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis member |2.4.A.3| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center chassis leg |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/floor |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 2 |5.3.6 |a| |i|| | 1 |
| Offside Front Brake prescribed area is excessively corroded chassis |1.1.21 |e| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outrigger To Spring Hanger |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded Sill Several Places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner Wing To Chassis |2.4.A.3| | 1 |
| Offside Front Drive shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Nearside Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Rear Leaf spring shackle bracket damaged and seriously weakened |5.3.1 |b| |i|| | 1 |
| Nearside Front Electrical wiring damaged, likely to cause a short headlamp |1.9.2b| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Step/Floor Holed. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner & Outer Sill Holed. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill Holed. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner & Outer Sill Holed To Rear Of Rear Wheel. (6.1.1 (c) (i)) | 1 |
| Bonnet primary retaining device excessively deteriorated Unable To Access. (3.1 (c)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x3 different spots of corrosion in the same area |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded in door edge |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in door edge |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar likely to fail nut loose |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg underside (6.2.2 (d) (i)) | 1 |
| Front Vehicle Identification Number not legible (0.2 (b)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to step |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch to chassis |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Nearside Front Trailing arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all rear |6.1.B.2| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury heavily corroded (6.2.8 (a) (ii)) | 1 |
| Nearside Front Cab steps so insecure it is likely to cause injury heavily corroded (6.2.8 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to chassis mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to chassis mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill heavily corroded (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member corroded (6.1.1 (c) (i)) | 1 |
| Rear Floor in such a condition it is likely to cause load insecurity or instability bed area excessively corroded (6.2.4 (a) (ii)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Lower Body has a projection caused by damage |6.1.C.1| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means temp fuel cap |7.2.4b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides several areas |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill in driver door well |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in chassis behind wheel |6.1.B.2| | 1 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt btm ball jiont |2.4.G.2| | 1 |
| Offside Front Horn control not readily accessible to the driver |1.6.1| | 1 |
| Nearside Rear Side repeater not working bad earth fault |1.4.A.2c| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp indicator / side light earth problem |1.4.A.2h| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d-bush |2.4.G.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded and wheel arch |2.4.A.3| | 1 |
| Rear Shock absorbers has a serious fluid leak both sides |5.3.2 |b|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outrigger at spring mounting |5.3.6 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases from centre silencer |6.1.2 |a|| | 1 |
| Nearside Front Steering linkage ball joint ball joint dust cover missing (2.1.3 (g) (ii)) | 1 |
| Engine mounting fractured (6.1.8 (a) (ii)) | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion side body step |6.1.C.1| | 1 |
| Nearside Rear Brake cable has restricted free movement fouling wheel |3.5.1k| | 1 |
| Nearside Front Body has a projection caused by damage bumper damaged and jagged edges |6.1.C.1| | 1 |
| Nearside Front Body has a projection caused by damage wing |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by damage headlight |6.1.C.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near rear wheel |6.1.B.2| | 1 |
| Nearside Front Suspension arm ball joint excessively worn And offside front (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired And offside front inner and outer sill (6.2.2 (d) (ii)) | 1 |
| Nearside Front Position lamp not working And offside front (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner mubgaurd |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor to inner arch |6.1.1 |c| |ii|| | 1 |
| Offside Outer Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Front Outer Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underneath |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel inner arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f engine mount |6.1.1 |c| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under step| expanding foam| |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step |expanding foam| |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill coroded| expanding foam| |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded under sill expanding foam |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under arch |5.2.6| | 1 |
| Nearside Rear All direction indicators not working Bad earth |4.4.1 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing rea |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced opposite to exhaust (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near engine mounting (6.2.2 (d) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded closing sill |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember spare wheel hanger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill rear and wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg under bonnet |6.1.B.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded vavle balance |3.3.A.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch near coil spring |6.1.B.2| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp effect offside rear postion lamp |1.4.A.2h| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner side valance |2.4.A.3| | 1 |
| Additional braking device damaged brake pedal anti-slip rubber worn |3.6.I.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering adjacent to brake compensator |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded adjacent to shockabsorber mount |2.4.A.3| | 1 |
| Centre Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Horn control insecure horn insecure |1.6.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mount chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer valance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring mount on chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount x2 holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount on chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount on chasssis x2 places |2.4.A.3| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis leg next to brake compsator mount |3.1.9| | 1 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement `D`bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement `D`bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger to inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at front spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded middle brasser bar o/s |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear crossmember at rear spring mounting |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s rear chassis over rear axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis over rear axle |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded suspension turret |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger and crossmember |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing area at top suspension mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring Hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Crossmember Holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner Sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner Sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis At Load Senser Mounting point |3.3.A.2| | 1 |
| Offside Front Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced front of door sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush back bush
|2.4.G.2| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top chassis leg holed and corroded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member near rear suspension |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg on side holed and corroded |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near rear leaf spring shackle bracket |2.4.A.3| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking |2.3.1b| | 1 |
| Nearside Hand operated control valve unit insecure |3.2.2a| | 1 |
| Offside Hand operated control valve unit insecure |3.2.2a| | 1 |
| Centre Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Front Inner Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount chalked |2.4.A.3| | 1 |
| Nearside Rear Lower Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sil |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Outer Body panel corroded and likely to cause injury skin sill |6.2.1 |a| |i|| | 1 |
| Offside Front Outer Body panel corroded and likely to cause injury skin sill |6.2.1 |a| |i|| | 1 |
| Nearside Inner Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill wheel arch |6.1.B.2| | 1 |
| Front Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded both outer sills, nearside inner sill, and both rear inner arches |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle and anchor areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle and anchor areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis areas |5.3.6 |a| |i|| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting chassis rails |6.1.6 |i| |i|| | 1 |
| Nearside Towbar coupling too weak bolt to chassis missing |6.1.6 |h|| | 1 |
| Nearside Shock absorber has an excessively worn bush Rear |2.7.4| | 1 |
| Fuel tank insecure front strap corroded (6.1.3 (a) (i)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step support on underside including inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step support including inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill along side of van (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill along side of van (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing and around suspension support (6.1.1 (c) (i)) | 1 |
| Front Anti-roll bar linkage insecurely attached x2 (5.3.3 (a) (i)) | 1 |
| Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Rear Prop shaft likely to become detached uj |6.1.7 |a| |ii|| | 1 |
| Rear Prop shaft bearing excessively worn one |6.1.7 |b| |i|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill area |6.1.1 |c| |ii|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Nearside Cab steps so insecure it is likely to cause injury corroded in area of outer and inner sill and close to but outwith prescribed area |6.2.8 |a| |ii|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR SPRING FRONT EYE |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR SPRING REAR EYE |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR SPRING FRONT EYE |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 x ares |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BY the LEAF SPRING (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch 2x places (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing within the |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step within the |5.2.6| | 1 |
| Offside Stop lamp emits other than a steady red light light faded |1.2.1e| | 1 |
| Rear Exhaust system not adequately supported bracket snapped |7.1.1| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded Crossmember |3.1.9| | 1 |
| Nearside Front Body has a sharp edge caused by damage Corner |6.1.C.1| | 1 |
| Central Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Body component corroded and likely to cause injury Step to climb into back of vehicle corroded and sharp edges |6.2.1 |a| |i|| | 1 |
| Central Front Vehicle structure is fractured and structural rigidity is significantly reduced cross section by the fuel tank (6.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor - under battery |5.2.6| | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis - above fuel tank |3.1.9| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut mount area |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer front and rear |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill front and rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill front and rear |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner chassis leg |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner chassis leg |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering To wing |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering Wing to chassis |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wing |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wing |6.1.B.2| | 1 |
| Rear Leaf spring anchor bracket corroded and seriously weakened Both side |2.4.B.6d| | 1 |
| Offside Body has a sharp edge caused by damage wing |6.1.C.1| | 1 |
| Offside Drivers view of an obligatory external mirror materially affected by an obstruction MIRROR MISSING (3.1 (a) (ii)) | 1 |
| Fuel tank insecure FRONT STRAP BROKEN (6.1.3 (a) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion outersill |6.1.C.1| | 1 |
| Offside Front Steering box has a significant oil leak |2.2.D.2e| | 1 |
| Rear Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Offside Front Brake hose bulging under pressure |1.1.12 |d|| | 1 |
| Offside Front Windscreen in an unacceptable condition (3.2 (c) (i)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt boot (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength small outrigger within 30 cm of suspension (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front edge wing sharp (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch rear (5.3.6 (a) (i)) | 1 |
| Front Exhaust silencer insecure silencer outer skin (8.1.1 (b) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger both sides rear hangers (5.3.6 (a) (i)) | 1 |
| Offside Upper Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door sill |6.1.B.2| | 1 |
| Inner Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Stop lamp adversely affected by the operation of another lamp no stop lights when side lights on |1.2.1f| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp front side lights come on when footbrake pressed |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at shocker mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember offside to nearside |6.6.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and out sills |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded stepwell |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded step well |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill assy |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded center sill asssy |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sillassy |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cable mount |3.1.9| | 1 |
| Rear Body has a sharp edge caused by corrosion cros member |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion under step |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion under step |6.1.C.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Panel underneath |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp Front & rear affecting stop light |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp Both affecting front / rear position lamps |1.2.1f| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill / step . Marked |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Top of chassis rail / bulkhead to rear of subframe |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger by rear spring hanger , marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger by front of spring , marked |2.4.A.3| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn prop shaft central bearing |2.4.G.4d| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of subframe mounting area and nearside by fuel tank mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury wing holed and jagged (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Rear Inner Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Front Leaf spring fractured |5.3.1 |b| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing marked with chalk |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill marked with chalk |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |multiple places| marked with chalk |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wiheel arch marked with chalk |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |multiple places| marked with chalk |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |multiple places| marked with chalk |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step area |multiple places| marked with chalk |6.2.2 |d| |i|| | 1 |
| Nearside Rear Bumper likely to become detached |6.1.4 |a| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/forward part of footwell |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/ jacking point |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion chassis |6.1.C.1| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2 places (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door ster (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded rear 2 places |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger 2 places (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded rear cab |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner wheel arch |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both sides inner upper wheel arch |2.4.A.3| | 1 |
| Nearside Front Headlamp light intensity severely reduced Dipped Beam (4.1.4 (a)) | 1 |
| Nearside Front Headlamp not working on dipped beam Full Beam (4.1.1 (a) (ii)) | 1 |
| Hazard warning lamps inoperative Nearisde rear not working (4.4.1 (e)) | 1 |
| Offside Front Brake hose damaged and likely to fail Not attached correctly liable to come loose (1.1.12 (a)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting damaged and its strength is seriously reduced rear subframe mount/chassis |2.4.G.1| | 1 |
| Rear Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor at seat mounting point (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mounting point panelling behind bumper (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mounting point (5.3.6 (a) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL FRONT TO REAR |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired STEP |6.2.2 |d| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ENGINE MOUNTING /BELOW HEADLIGHT |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near chassis |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step, <30cm from seat/seat belt mounts (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting<30cm from spring mount (Rear) (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting<30cm from spring mount (Rear) (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill, <30cm from seat/seat belt mount (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch, <30cm from brake pipe mount (6.2.2 (d) (i)) | 1 |
| Central Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer corner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch and floor |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step to inner sill |5.2.6| | 1 |
| Nearside Rear Direction indicator incorrect colour lens damaged allowing white light to rear |1.4.A.2f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis, 2x patches |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear cross member |6.6.6| | 1 |
| Rear rear brake recording little or no effort service low x2 |3.7.B.5a| | 1 |
| Offside Front Outer Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section, in front of wheel |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner and outer |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outer |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing under bonnet |chalked| |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg under bonnet |chalked| |6.1.B.2| | 1 |
| Offside Front Body has a projection caused by corrosion outer wing |chalked| |6.1.C.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis member |chalked| |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |chalked| |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |chalked| |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |chalked| |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |chalked| |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corrosion |chalked| |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing corrosion |chalked| |6.1.B.2| | 1 |
| Nearside Rear Body has a projection caused by corrosion outer wing |chalked| |6.1.C.1| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corrosion |chalked| |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing lower corrosion |chalked| |6.1.B.2| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing upper corrosion |chalked| |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner chassis corrosion |chalked| |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is fractured wheel arch splitting from floor pan by shock absorber |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and outrigger by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion body panel above sill and by wheel arch |6.1.C.1| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches, inner and outer sills (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches, inner and outer sills (6.1.1 (c) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength various places (5.3.6 (a) (i)) | 1 |
| Brake pipe leaking main front to rear |3.6.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill by spring anchor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill by spring anchor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by spring shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded cassie |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre inner sill |2.4.A.3| | 1 |
| Nearside Rear Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Headlamp light source and lamp not compatible hid`s fitted |4.1.4 |c|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/S INNER AND OUTER SILLS - WELDING |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/S/F INNER WHEEL ARCH - WELDING |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded R/N/S FLOOR ABOVE LEAF SPRING - WELDING |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded R/N/S LEAF SPRING, REAR MOUNT POINT - WELDING |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded R/N/S OUTER ARCH TO OUTER + INNER SILL - WELDING |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion sill area |6.1.C.1| | 1 |
| Offside Seat belt locking mechanism does not secure or release centre |5.2.5a| | 1 |
| Central Suspension spring mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Entrance/exit door damaged and function impaired side door handle |6.2.C.1a| | 1 |
| Seat belt locking mechanism does not secure or release check all rear seat belts
|5.2.5a| | 1 |
| Seat belt retracting mechanism defective check all rear seat belts |5.2.5b| | 1 |
| Offside All position lamps have less than 50% of the light sources illuminating side lens missing |1.1.A.3b| | 1 |
| Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement n/s lower arm rear bush |2.4.G.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear outer quarter panel corroded |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill corroded |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s inner sill corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner sill to out rigger corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner party of cross member corroded |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded and offside |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering leg end near engin mounting |6.1.A.1| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door stap |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded steps n/s and o/s |5.2.6| | 1 |
| Rear Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Centre Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and outer sill |6.1.B.2| | 1 |
| Floor excessively deteriorated ns inner sill, ns under step, nsr inner sill |6.2.4 |a| |i|| | 1 |
| Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment NO RESERVE TRAVEL (1.1.6 (c)) | 1 |
| Drivers seat with a defective structure LOWER MOUNTING EXCESSIVELY CORRODED (6.2.5 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases MULTIPLE HOLES (6.1.2 (a)) | 1 |
| Emissions not tested DUE TO EXHAUST LEAK (8.2.2.2 (e)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced LOWER SEAT (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced STEP HEAVILY CORRODED (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced hole in N/S sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Sub-frame insecurely attached rear bolt (5.3.3 (a) (i)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting driver door step-less than 30cm from seat mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting pasenger door step- less than 30cm from seat mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded REAR SPRING MOUNT |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis under seat |5.2.6| | 1 |
| Suspension arm has excessive play in a pin/bush both front arm rear bushes |2.4.G.2| | 1 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both lower balljoint |2.4.G.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded cill by spring hanger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner arches by spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassis leg by shock m,ounting |2.4.A.3| | 1 |
| Centre Exhaust has a major leak of exhaust gases joints |7.1.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 2 |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg beside bump stop |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength beside bump stop area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step area and inner and outer sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Stop lamp not working intermittent |1.2.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step in 2 areas (7.1.1 (a) (i)) | 1 |
| Body insecure and dangerous to other road users Offside front mudflap |6.1.B.1b| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 5 |6.1.B.2| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 3 |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded various places |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill and under body sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chaiss |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under body step |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded middle chassis member |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked |6.1.1 |c| |i|| | 1 |
| Nearside Outer Seat belt flexible stalk damaged likely to lead to failure under load not workig |5.2.4a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by shackle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by shackle |6.1.B.2| | 1 |
| Centre Inner Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre bottom of sill has a hole (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced box section corroded and no longer secured to rail (7.1.1 (a) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Rear of cab (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill |7.1.1 |a| |i|| | 1 |
| Offside Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Body insecure Corrosion on inner and outer sill (6.2.2 (a) (i)) | 1 |
| Offside Body insecure Corrosion on inner and outer sill (6.2.2 (a) (i)) | 1 |
| Nearside Stop lamp(s) lens defective such that the emitted light is adversely affected NEEDS NEW LENSE (4.3.1 (b) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced NS SILL & STEP (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf sping (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor near seat anchor points |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor near rear shocker |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor near rear shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch near rear shocker |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch near rear shocker |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front to rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front to rear |6.1.B.2| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| n/s rack |2.2.A.1b| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis|brake compensator mounting| |3.3.A.2| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded underneath |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded underneath within 30 cm of shock absorber |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded chassis, within 30 cm of shock absorber |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded chassis within 30 cm of shock absorber |2.4.A.3| | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced crossmember |6.1.1 |a| |i|| | 1 |
| Nearside Position lamp light intensity significantly reduced when another light operated |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring. inner sill. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring. inner sill. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/outrigger area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis / outrigger area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis / outrigger area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassie |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner quater |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner chassie |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chasie |2.4.A.3| | 1 |
| Fuel system component leaking poss fuel pump |7.2.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rear axle area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rear axle area |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis front suspension area |2.4.A.3| | 1 |
| Offside Inner Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner wing |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner wing |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front chassis leg |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter panel |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Front suspension has excessive play in a lower wishbone bearing rear bush |2.5.B.1a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outer (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing top (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis leg to out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg on top (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg on top (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner step holed (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed next to brake hose x2 (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (center part) (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed within 30cm of spring hangar (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner arch holed within 30 cm of rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis holed next to shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and arch next to chassis and spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks starter motor cables |4.11 |c| |iii|| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member |6.1.1 |c| |ii|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg under headlight |6.1.1 |c| |ii|| | 1 |
| Emissions not tested engine failure likely |8.2.1.2 |d|| | 1 |
| Driver`s airbag missing |5.4.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer door post |6.1.C.1| | 1 |
| Front Fuel tank insecure SECURING TANK STRAP SNAPPED |7.2.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded SILL AS MARKED |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering in engine bay on top |6.1.1 |c| |ii|| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering in wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer chassis corroded |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch body |6.1.1 |c| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring x3 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/chassey |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured Forward eye. |2.4.B.1a| | 1 |
| Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) track rod ends locking device nearside and offside loose (2.3 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front most leaf spring mount x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor pan (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength leafspring mount (5.3.6 (a) (i)) | 1 |
| Emissions not tested very noisy (8.2.2.2 (e)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/chassis (6.2.2 (d) (i)) | 1 |
| Rear Exhaust system insecure rear rubber mount deteriorated |6.1.2 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Lower Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Offside Suspension has inadequate clearance with the bump stop Bump stop detached |2.4.A.1a| | 1 |
| Nearside Front Front position lamp|s| not working Side |1.1.A.3b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near engine mounting |6.1.B.2| | 1 |
| Centre Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Offside Lower Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Road wheel fixing missing stud snapped (5.2.1 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner + outer sills |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner + outer sills |6.1.B.2| | 1 |
| Rear Tie bar/rod has excessive play in a pin/bush both |2.4.G.2| | 1 |
| Front suspension has excessive movement at a wishbone pin or bush o/s & n/s front wishbones rear bushes |2.5.A.1c| | 1 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint middle and middle rubber worn |2.4.G.4b| | 1 |
| Offside Front Upper Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Nearside Anti-roll bar locating pin incorrectly positioned |2.4.G.3a| | 1 |
| Offside Inner Front Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Rear Brake cable damaged rubbed through on wheel |1.1.15 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inside wheel arch above engine mounting bolts (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Passenger step and sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Drivers step and sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near top of antiroll bar link (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near top of antiroll bar link (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Driver`s seat insecure inner and outer sills seat mount areas |6.2.A.1| | 1 |
| Nearside Passenger`s seat insecure inner and outer sills by seat mounts |6.2.A.1| | 1 |
| Offside Rear Tailgate cannot be secured in the closed position pin missing |6.4.1| | 1 |
| Offside Body component damaged and likely to cause injury door mirror (6.2.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn drop link (5.3.4 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to step (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to the rear of the rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Tie bar/rod locating pin insecure |2.4.G.3a| | 1 |
| rear brake recording little or no effort O/S,N/S |3.7.B.5a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of the chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer door step/sill (6.1.1 (c) (i)) | 1 |
| Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Rear position lamp|s| not working top both |1.1.A.3b| | 1 |
| Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear outrigger, inner quarter panel and rear cross member. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel and rear cross member. |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength outer sill |5.2.6| | 1 |
| Nearside Inner Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle section and rear (6.1.1 (c) (i)) | 1 |
| Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Suspension component corroded and seriously weakened springs all round (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger and step etc rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing and floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill and outer panel |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis out rigger corroded to excess |6.1.1 |c| |i|| | 1 |
| Prop shaft flexible coupling excessively deteriorated front center bearing excessive play (6.1.7 (d) (i)) | 1 |
| Nearside Rear Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d| | 1 |
| Nearside Rear Lower Leaf spring deteriorated and seriously weakened anchor attatchment |2.4.B.1a| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded hanger in 3 places |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded shackle |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded hanger |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded shackle |2.4.A.3| | 1 |
| Central Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in 2 places |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of cab |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of cab |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member at front of leaf spring mount |6.1.B.2| | 1 |
| Rear Anti-roll bar linkage has excessive play in a ball joint Both |2.4.G.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Center sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Center sill |6.1.B.2| | 1 |
| Nearside Inner Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis x2 |6.1.B.2| | 1 |
| Front Front wheel bearing has excessive play both |2.5.A.3c| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both steps |6.1.B.2| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill / step |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer & inner cill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings pannel behind bumper |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both wings |6.1.B.2| | 1 |
| Nearside Front Inner Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Offside Front Inner Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Nearside Front Inner Body component corroded and likely to cause injury wheel arch. |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Body component corroded and likely to cause injury wheel arch. |6.2.1 |a| |i|| | 1 |
| Nearside Rear Inner Body component corroded and likely to cause injury wheel arch. |6.2.1 |a| |i|| | 1 |
| Offside Rear Inner Body component corroded and likely to cause injury wheel arch. |6.2.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar locating pin retaining device missing |2.4.G.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded ouytrigger |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded chassis leg by engine mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis section |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded drop sill area |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded drop sill area |5.2.6| | 1 |
| Body insecure and dangerous to other road users hydrulic pump falling off corroision |6.1.B.1b| | 1 |
| Nearside Rear Leaf spring main leaf fractured rear eye (5.3.1 (b) (ii)) | 1 |
| Offside Rear Leaf spring main leaf fractured rear eye (5.3.1 (b) (ii)) | 1 |
| Nearside Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii|| | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel foot brake very poor effort (1.2.1 (a) (ii)) | 1 |
| Offside Rear Service brake has no recorded effort at a wheel foot brake very poor effort (1.2.1 (a) (ii)) | 1 |
| Fuel tank insecure front strap corroded and broken |7.2.1| | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting back panel |6.6.6| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near wheel arch marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear |6.1.B.2| | 1 |
| Front Steering rack fixing bolts ineffective oil leak bad |2.1.2 |c| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step |5.3.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step |5.3.6 |a| |ii|| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Prop shaft bearing housing likely to fail diff |6.1.7 |f| |ii|| | 1 |
| Rear rear brake recording little or no effort ns and os |3.7.B.5a| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush wishbone |2.4.G.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor/footwell |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area at rear of sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill at rear of sill |6.1.B.2| | 1 |
| Nearside Front Inner Front suspension has excessive movement at a wishbone pin or bush rear bush in wishbone rubber separated |2.5.A.1c| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2a| | 1 |
| Offside Front Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both near and offsides |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both offside and nearsides |2.4.A.3| | 1 |
| Hazard warning tell tale not working correctly on dash |1.4.B.1e| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded door step to sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded door step to sill |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction phone holder (3.1 (a) (ii)) | 1 |
| Seat belt anchorage loose rear seat bolts missing (7.1.1 (b)) | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings spring hanger area marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings cill area marked yellow |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer |5.2.6| | 1 |
| Offside Rear Direction indicator incorrect colour light lense smashed |1.4.A.2f| | 1 |
| Offside Front Sub-frame inappropriately repaired sub frame has been cut |2.4.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /step (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sprng front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember hanger |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at bracket mount |3.1.9| | 1 |
| Steering column retaining device insecure lower mount |2.1.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring front mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis at front subframe mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis at front subframe rear mounting |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre rigger |3.1.9| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring front mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring front mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outrigger at rear spring rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember area at rear spring rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis over rear axle |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front of leaf spring |6.1.A.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded upper spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded around shackle mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded around shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion behind front bumper |6.1.C.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis/floor |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced chassis corroded near load compensater (6.1.1 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury outer sill sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced near suspension commponent (6.1.1 (a) (i)) | 1 |
| Offside Front Lower Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Hazard warning lamps inoperative when lights switched on |1.4.B.1b| | 1 |
| Direction indicator adversely affected by the operation of another lamp offside indicator not working when lights on |1.4.A.2h| | 1 |
| Direction indicator adversely affected by the operation of another lamp offside indicator s stay on when lights on |1.4.A.2h| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded flooring within 30cms of seat mounting |5.2.6| | 1 |
| Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement arm rear bush |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door sill
|5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail at front |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail corroded at rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail corroded at front spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail corroded at rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at top shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail top shock mounting |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Inner arch |3.6.C.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Inner arch chassis leg |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Cross member |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Cross member |6.1.C.1| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn drop link bush |5.3.4 |a| |i|| | 1 |
| Offside Rear brake disc contaminated by oil |3.5.1h| | 1 |
| Nearside Rear Outline marker lamp not working amber |4.2.1 |a|| | 1 |
| Offside Rear Outline marker lamp not working red |4.2.1 |a|| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only FRONT CABLE BROKEN |3.1.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under seat base. |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner wheel arches corroded with in suspension component. |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear cross member corroded within a suspension component. |2.4.A.3| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis corroded within a handbrake mounting. |3.1.9| | 1 |
| Nearside Outline marker lamp not working x2 (4.2.1 (a) (ii)) | 1 |
| Offside Body component damaged and likely to cause injury drop side (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step area ,multiple (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area, multiple (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area, multiple (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area, multiple (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure strap corroded and snapped (6.1.3 (a) (i)) | 1 |
| Front Prop shaft securing bolt loose joint bolt (6.1.7 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x2 |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet |5.3.6 |a| |i|| | 1 |
| Nearside Indicator switch faulty |1.4.A.1| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded chassis (2.1.2 (e) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step/outer sill and inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step/outer sill and inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step to rear bulk (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage corroded and seriously weakened drop link (5.3.3 (b) (i)) | 1 |
| Fuel tank insecure strap corroded off (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake pipe leaking front to rear brake pipe |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded foot well and step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded foot well and sill |5.2.6| | 1 |
| Brake performance not tested due to condition of discs |3.7.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor and crossmember areas |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded footwell areas |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre support cross member |3.1.9| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring anchor area holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle area holed |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis cross-member holed by drop-link mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch and floor to chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie |5.3.6 |a| |i|| | 1 |
| Rear Inner Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner chassie leg |5.3.6 |a| |ii|| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner chassie leg |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassie leg |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 1 |
| Central Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mount at leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at inner door step at tank |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch x1 place |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at handbrake mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at handbrake mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Brake drum contaminated cylinder leaking |1.1.14 |b|| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected spoungy |1.1.2 |b| |ii|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassie leg various places at leaf spring |5.3.6 |a| |ii|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassie leg various places at leaf spring |5.3.6 |a| |ii|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing x3 places |5.3.6 |a| |i|| | 1 |
| Nearside Front Front passenger door likely to open inadvertently or not remain closed |6.2.3 |b| |ii|| | 1 |
| Nearside Front Front passenger door hinge insecure |6.2.3 |c| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch behind spring |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch behind spring |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of inner wing |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above rear axle, |6.1.B.2| | 1 |
| Nearside Rear Brake load sensing valve defective and function impaired seized, |3.6.E.3| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis next to load compensator |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength x 2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength x 2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear wishbone bush |2.4.G.2| | 1 |
| Front Track rod end ball joint has excessive play Both sides |2.1.3 |b| |i|| | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Door step |6.2.2 |d| |i|| | 1 |
| Exhaust system insecure both front rubbers split (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step (7.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering strut upright tunnel (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp sidelight/indicator (4.2.3 (c)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Rear Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Front wheel bearing rough when rotated +play |2.5.A.2| | 1 |
| Rear Leaf spring inappropriately repaired both |2.4.A.2| | 1 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Prop mounting (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Door step (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of cab (7.1.1 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember above tank (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Door step / outer sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of cab (7.1.1 (a) (i)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction wipers wont park (3.1 (a) (ii)) | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system abs module (1.1.11 (b) (ii)) | 1 |
| Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Both sides of chassis behind cab |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded understep panel |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded cab bulkhead |5.2.6| | 1 |
| Nearside Rear Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Front Steering locking device missing |2.2.C.1g| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member outrigger |2.4.A.3| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DANGEROUS |6.1.B.2| | 1 |
| Offside Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings above exhaust blue chalk |6.1.B.2| | 1 |
| Offside Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings blue chalk under cab?drivers door |6.1.B.2| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings blue chalk under cab/passengers door |6.1.B.2| | 1 |
| Offside Front Inner Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded door sill area |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower wing area |6.1.B.2| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement o/s &n/s |2.4.G.2| | 1 |
| Offside Seat belt insecurely fixed to the seat Not bolted on |5.2.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheelarch and chassi |2.4.A.3| | 1 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings cross section |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded lower turret |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inside cab |7.1.1 |a| |i|| | 1 |
| Nearside Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear bumper inner sill |6.1.B.2| | 1 |
| Offside Steering pivot point has excessive play steering rack end |2.2.B.1g| | 1 |
| Nearside Rear Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner arch area |6.1.B.2| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill several areas |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x member full length |2.4.A.3| | 1 |
| Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings CROSS MEMBER |6.1.B.2| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour SHOWING WHITE LIGHT TO REAR |1.1.A.3e| | 1 |
| Rear Direction indicator incorrect colour SHOWING WHITE LIGHT TO REAR |1.4.A.2f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill area as marked |2.4.A.3| | 1 |
| Front Brake disc significantly and obviously worn x2 (1.1.14 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area and outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area and outer sill (7.1.1 (a) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced x member x2 (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INER WING (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL END CAP (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL END CAP (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Front Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected |steering rack fitted| |2.3 |a| |ii|| | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected |steering rack fitted| |2.3 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger areas |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded midd to rear outrigger areas |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded midd to rear outrigger areas |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear crossmember n/s o/s |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail on inside |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail on outside |2.4.A.3| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired mount bracket bent |3.6.E.3| | 1 |
| Rear Loading door cannot be secured in the closed position doors |6.4.1| | 1 |
| Nearside Outer Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Lower engine mounting deteriorated resulting in excessive movement gearbox mount bolt loose |6.1.D.1a| | 1 |
| Fuel pipe excessively chafed injector pipe |7.2.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Coil spring mount area (5.3.6 (a) (i)) | 1 |
| Brake pedal has insufficient reserve movement excess footbrake travel |3.3.A.5| | 1 |
| Brake pipe inadequately supported both front to rear metal brake pipes |3.6.B.1| | 1 |
| Nearside Front Brake pipe inadequately supported flitch metal brake pipe |3.6.B.1| | 1 |
| Nearside Front Brake hose excessively damaged retaining bracket broken |3.6.B.4d| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion sill holed |6.1.C.1| | 1 |
| Offside Inner Body has a sharp edge caused by corrosion sill holed |6.1.C.1| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion door step |6.1.C.1| | 1 |
| Nearside Front Other passenger door likely to open inadvertently or not remain closed (6.2.3 (b) (ii)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel 100kg (1.2.1 (a) (i)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel 110kg (1.2.1 (a) (i)) | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened rear outer bracket |2.4.B.6d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Floor area |2.4.A.3| | 1 |
| Ball joint has excessive play 0ff side |2.2.B.1f| | 1 |
| Front wheel bearing has excessive play 0ff side front |2.5.A.3c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing area. |2.4.A.3| | 1 |
| Offside Inner Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Body insecure and dangerous to other road users bumper end loose |6.1.B.1b| | 1 |
| Front Stop lamp adversely affected by the operation of another lamp sides earthing to rear stops |1.2.1f| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush x2 |2.4.G.2| | 1 |
| Rear Subframe mounting prescribed area is fractured inner and outer sills x2 |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint not secure |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Centre Rear Brake valve has an excessive discharge of oil |3.6.E.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step/inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step. (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill/outer sill corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure modified such that structural rigidity is significantly reduced inner arch (6.1.1 (d) (i)) | 1 |
| Offside Front Vehicle structure modified such that structural rigidity is significantly reduced inner arch (6.1.1 (d) (i)) | 1 |
| Nearside Front Outer Vehicle structure modified such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear crossmembers in front of diff and at rear of diff |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and top and bottom of chassis leg |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper ancorage (6.1.1 (c) (i)) | 1 |
| Offside Rear Position lamp not working sidelighjt (4.2.1 (a) (ii)) | 1 |
| Horn not working horn inoperative (7.7 (a) (ii)) | 1 |
| Supplementary restraint system warning lamp indicates a fault air bag light (7.1.6 (a)) | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering near power steering pipe (6.1.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis near engine mounting (6.1.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering center outrigger (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis outrigger (6.1.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering innerwing behind roadwheel (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill under step (6.1.1 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing as marked. |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis as marked. |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis as marked. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near lifting ram as marked. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near lifting ram as marked. |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch 2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened linkage mounting |5.3.3 |b| |i|| | 1 |
| Spare wheel insecure in carrier |6.1.5 |b| |i|| | 1 |
| Front Fuel pipe insecure |7.2.1| | 1 |
| Front Bonnet retaining device excessively deteriorated bonnet doesn`t open |8.4.2| | 1 |
| Nearside Front Outer Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Offside Front Outer Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Nearside Front Body has a projection caused by corrosion inner sill |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion inner sill |6.1.C.1| | 1 |
| Nearside Front Inner Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Front Inner Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion under battery tray |6.1.C.1| | 1 |
| Nearside Front Body has a projection caused by corrosion under seat |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion bump stop |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion bump stop |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion next to bump stop |6.1.C.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil and floor |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sil |6.1.B.2| | 1 |
| Brake valve leaking rear load valve (1.1.7 (d) (i)) | 1 |
| Emissions not tested excess smoke |8.2.2.2 |e|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering and offside |6.1.A.1| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings all under fehicle |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above rear axle (6.1.1 (c) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury quarter panel (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected box section (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected top mount section (5.3.6 (a) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced From front to back both sides |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail & rear crossmember |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail & inner wheel arch |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail & inner wheel arch |6.1.A.1| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings SILLS AND STEP AREA |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILLS AND STEP AREA |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner plus outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired UNDER WHEEL ARCH |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring hangers corroded |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis corroded |5.3.6 |a| |ii|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded all round step area corroded |2.1.2 |e| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills both sides corroded |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s rear inner floor and wheel arch area |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s rear inner floor and wheel arch area |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear floor |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner floor area |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake pipe leaking on an air braking system under bonnet |1.1.11 |b| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near engine mounting (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill center |5.2.6| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step assy (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop (6.1.1 (c) (i)) | 1 |
| Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop area |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop area |6.1.1 |c| |i|| | 1 |
| Fuel system component leaking VERY BAD LEAK - PUMP AREA |7.2.3| | 1 |
| Nearside Inner Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front to rear |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x2 (6.2.2 (d) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis leg holed and corroded local to |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside and nearside outer sills local to |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear inner wings local to suspension |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer chassis rail , marked (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Underside & inner face of chassis rail , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill ahead of wheel arch , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger before wheelarch , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Inner chassis face above axle , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside of chassis / stiffener , corroded & holed , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower chassis face by spring eye , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Rear cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Chassis corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill corroded (5.3.6 (a) (i)) | 1 |
| Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body x 2 |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body x 1 |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor wheel arch. |6.1.B.2| | 1 |
| Offside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings body x 2 |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body x 4 |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floor. |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired inner sill |5.2.6| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top mount |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top mount |2.4.A.3| | 1 |
| Nearside Outer Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension top mounting |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut mount inner wing area |2.4.A.3| | 1 |
| Nearside Inner Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side of tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under and outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake pipe inadequately clipped to cylinder |3.6.B.1| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint ball joint loose in the hub |2.5.B.1a| | 1 |
| Nearside Rear passenger door does not latch securely closed lower latch |6.2.B.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step and chassie (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Hydraulic brake calliper insecurely mounted bolt missing |1.1.16 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch x 2 |2.4.A.3| | 1 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached front bolt loose (5.3.4 (a) (ii)) | 1 |
| Offside Front Drivers door hinge insecure Drivers door upper hinge mounting area corroded hinge not secure (6.2.3 (c) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured Roll Bar link top fixing broken off (5.3.3 (b) (ii)) | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired Load sensing valve lever seized (1.1.17 (a)) | 1 |
| Offside Inner Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint and o/s |2.5.B.1a| | 1 |
| Nearside Rear Brake inadequately mounted load valve |1.1.21 |c|| | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure d shackle bolt missing on offside nearside bolts loose |5.3.3 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step floor cracked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced step cracked on seem (6.1.1 (a) (i)) | 1 |
| Nearside Fuel pipe insecure centre of chassis |6.1.3 |a| |i|| | 1 |
| Offside Obligatory mirror seriously deteriorated affecting the rear view |6.6.1b| | 1 |
| Driver`s view restricted by object plastic strip at top |6.9.1a| | 1 |
| Emergency exit door cannot be opened from inside the vehicle rear handle missing |6.2.D.1a| | 1 |
| rear brake recording little or no effort both o/s and n/s rear |3.7.B.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top shocker mount area behind wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top shocker mount area behind wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring support and spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring support and spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner wheel arch |6.1.1 |c| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member front of axle excess corrosion |6.1.B.2| | 1 |
| Rear Body insecure and dangerous to other road users floor panels insecure |6.1.B.1b| | 1 |
| Battery insecure battery tray excessively corroded |1.9.1| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush
|2.4.G.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shocker top mount |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tow bar mounting/spring mount |6.1.B.2| | 1 |
| Rear wheel bearing rough when rotated both |2.6.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Brake pipe excessively damaged kinked |1.1.11 |c|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Steering retaining device missing |2.2.C.1g| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded floor pan by steering column (2.1.2 (e) (i)) | 1 |
| Nearside Rear Upper Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Central Seat belt buckle missing |7.1.2 |d|| | 1 |
| Offside Rear Leaf spring fractured anchor eye (5.3.1 (b) (i)) | 1 |
| Nearside Front Wheel bearing has excessive play and rough (5.1.3 (a) (i)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel leak from engine (8.4.1 (a) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2x holes (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2x holes next to fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring shackle bracket damaged and seriously weakened rear shackle |5.3.1 |b| |i|| | 1 |
| Fluid leaking continuously posing a serious risk to road safety diesel |8.4.1 |a| |ii|| | 1 |
| Nearside Body panel damaged and likely to cause injury mirror backing |6.2.1 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inside wheel arch |6.1.A.1| | 1 |
| Nearside Front Track rod end ball joint has excessive play boot also split (2.1.3 (b) (i)) | 1 |
| Central Front Exhaust silencer likely to become detached pipe splitting and coupling loose (8.1.1 (b) (ii)) | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill door step |6.1.B.2| | 1 |
| Nearside All outline marker lamps not working side markers |4.2.1 |a|| | 1 |
| Offside All outline marker lamps not working side markers |4.2.1 |a|| | 1 |
| Rear Prop shaft bearing excessively worn Rear joint. |6.1.7 |b| |i|| | 1 |
| Front Prop shaft securing bolt loose |6.1.7 |a| |i|| | 1 |
| Central Prop shaft bearing excessively worn Support bearing. |6.1.7 |b| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn Link arm lower bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn Link arm lower bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL 2 STEP (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 1 |
| Front Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 1 |
| Offside Lower Stop lamp not working |1.2.1b| | 1 |
| Fuel tank insecure strap u/s |6.1.3 |a| |i|| | 1 |
| Nearside Front Electrical wiring insecure and in contact with sharp edges loom harness (4.11 (a) (ii)) | 1 |
| Additional braking device component|s| insecure |3.6.I.1| | 1 |
| Fuel tank insecure front strap deteriorated |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded above bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Central Rear Vehicle structure is fractured and structural rigidity is significantly reduced cross section (6.1.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross section (6.1.1 (c) (i)) | 1 |
| Offside Seat belt buckle damaged (7.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis outrigger near rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger and inner sill within 30cms of front spring hanger (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside inner sill full length of car (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength incomplete welding offside inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing corroded round top shock absorber fixing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member and chassis badly corroded round front suspension arm fixing (5.3.6 (a) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded INNER SILL |2.2.C.1h| | 1 |
| Offside Rear Torque/reaction arm insecure |2.4.G.1| | 1 |
| Offside Front Engine mounting fractured Rotten (6.1.8 (a) (ii)) | 1 |
| Front Upper Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Upper Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Inner Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers door step |6.1.B.2| | 1 |
| Front position lamp|s| not working top |1.1.A.3b| | 1 |
| Nearside Rear Outer Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Rear Body insecure and dangerous to other road users flatbed |6.1.B.1b| | 1 |
| Nearside Rear Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure Rear Bolt Loose |5.3.3 |a| |i|| | 1 |
| Brake performance not tested Due to leak (1.2.1 (g)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cab step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened Rear bracket |2.4.B.6d| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded Floor supports around spare wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount areas x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount areas X2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mount area - inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mount area - inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mount area |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is inadequately repaired Door step |2.4.A.3| | 1 |
| Offside Rear Stop lamp not working baulbin wrong |1.2.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear suspension mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch incomplete welding |6.1.B.2| | 1 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to spare wheel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to brake load valve |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step incomplete welding |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner chassis incomplete welding |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner |6.1.B.2| | 1 |
| Nearside Outer Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength doorstep |5.3.6 |a| |i|| | 1 |
| Centre Rear Statutory seat belt missing buckle missing |5.1.1| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush Both rear D bushes |2.4.G.2| | 1 |
| Offside Outline marker lamp not working central (4.2.1 (a) (ii)) | 1 |
| Exhaust system insecure X 2 rubbers (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing arch near shocker mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured front mount (5.3.1 (b) (ii)) | 1 |
| Central Prop shaft bearing excessively worn bush worn (6.1.7 (b) (i)) | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near side & off side @ Brake Compensator Valve |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases holed |7.1.2| | 1 |
| Exhaust system not adequately supported Rear Box |7.1.1| | 1 |
| Nearside Rear Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b)) | 1 |
| Offside Headlamp lens seriously defective no pattern being produced (4.1.1 (b) (ii)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers door step |6.1.B.2| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer + inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front spring mount |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring mount ALL AREAS CORRODED |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring front mount ALL AREAS |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring mount ALL AREAS CORRODED |6.2.2 |d| |i|| | 1 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush front |2.4.B.2| | 1 |
| Central Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body cab chasis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings body cab chasis |6.1.B.2| | 1 |
| All outline marker lamps missing |4.2.1 |a|| | 1 |
| Power steering component leaking at power steering rack |2.1.5 |a|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn at diff + link arm |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn at diff + link arm |5.3.4 |a| |i|| | 1 |
| Brake pipe likely to become detached or damaged front to rear |1.1.11 |d| |ii|| | 1 |
| Front Fuel tank insecure bracket snapped |7.2.1| | 1 |
| Side repeater not working both sides (4.4.1 (a) (ii)) | 1 |
| Bonnet cannot be secured in the closed position and open (3.1 (b) (i)) | 1 |
| Fuel system component leaking pipe on fuel pump |7.2.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and step |7.1.1 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step and sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step and sill |7.1.1 |a| |i|| | 1 |
| Nearside Front brake disc contaminated by grease |3.5.1h| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded end sill |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle crossmember |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arches to flooring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch to flooring |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill backing panel.also evidence of fiberglass |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake performance not tested flitch metal brake pipe leaking |1.2.1 |g|| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system flitch metal brake pipe |1.1.11 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded in wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill as marked |5.3.6 |a| |i|| | 1 |
| Central Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s outer sill as marked |5.3.6 |a| |i|| | 1 |
| Central Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s inner sill as marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wing At Upper Point & Rear Of Wheel Arch & Step. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis Leg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Out Rigger Adjacent To S/Absorber Mounting & Out Rigger At Rear Of O/S/ Wheel Adjacent To Spring Mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Out Rigger & Rear Panel Corner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Out Rigger Adjacent To rear Panel & Rear Panel Corner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Wheel Arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Out Rigger Adjacent To N/S Spring Mounting |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis Adjacent To LSV |3.3.A.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner & Outer Sills |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nsf turret top |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded osf turret top |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/f inner arch |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is severely distorted front inner sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded chassis o/s/f |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount front |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded leaf spring mount front |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount rear |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by damage near lamp |6.1.C.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear safety step acting as crossmember |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete inner and outer sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete inner and outer sill
|6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner arch |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner arch |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back of sill to rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Position lamp not working all lights INOP |4.2.1 |a|| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings to rear inner sill |6.1.B.2| | 1 |
| Front position lamp|s| not working BOTH N/S AND O/S |1.1.A.3b| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis inner |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis inner |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened suspension arm |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering and rear inner and outer sills |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering and rear wheel archs |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering and rear inner and outer sills |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering and rear inner and outer wheel archs |6.1.1 |c| |ii|| | 1 |
| Nearside Outer passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Offside Rear Leaf spring saddle is fractured front of spring |2.4.B.7a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg rear of engine |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced hanbrake mounting point and rear of cab |7.1.1 |a| |i|| | 1 |
| Brake load sensing valve seized rear valve not working |3.6.E.3| | 1 |
| Exhaust has a major leak of exhaust gases rear box
|7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross-member for spare wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross-member at rear of leaf spring hanger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside and nearside rear outer sills in front of back wheels |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch next to strut top area "Chalked" |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside and nearside front inner sills |5.2.6| | 1 |
| Nearside Front Leaf spring eye defective |shackle| |2.4.B.1b| | 1 |
| Nearside Inner Rear Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill panel corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded excess corrosion in front of mount |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front spring eye mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger mounting area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area by top mounting |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch area by top mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger mounting area |2.4.A.3| | 1 |
| Nearside Mechanical brake component securing device loose |3.5.1i| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative compensator |1.1.17 |c| |ii|| | 1 |
| Offside Front Floor excessively deteriorated inner step |6.2.4 |a| |i|| | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Rear position lamp|s| insecure light board |1.1.A.3a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded lower inner quarter |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower inner quarter |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis leg by fuel tank |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired step |5.2.6| | 1 |
| Offside Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmember |6.6.6| | 1 |
| Front All position lamps not working both |1.1.A.3b| | 1 |
| Rear All position lamps not working both |1.1.A.3b| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis leg |6.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is severely distorted sill |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded shassis rail |2.4.A.3| | 1 |
| Nearside Brake valve leaking |3.6.A.1| | 1 |
| Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected broken showing white light to rear |4.5.1 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis on top and side |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded ns,os outer and inner sills,both front step sills and rear chassis. |2.4.A.3| | 1 |
| Braking system leaking os front caliper |3.6.A.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member nearside and offside front and rear corners |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake performance not tested pipe burst on first application |1.2.1 |g|| | 1 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Brake prescribed area is excessively corroded Rear cross member rear brake flexi mounting (1.1.21 (e) (i)) | 1 |
| Brake prescribed area is excessively corroded Centre cross member handbrake moutning (1.1.21 (e) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre cross member exhaust mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Cab step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Cab step (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch chassis leg (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CENTRE CROSS MEMBER (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CAB STEP AND WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Rear Shock absorber has a serious fluid leak both side rear |2.7.3| | 1 |
| Rear Anti-roll bar has excessive play in a ball joint both side |2.4.G.2| | 1 |
| Offside Rear Direction indicators incorrect colour lamp unit smashed |1.4.A.2f| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Nearside Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement both rear bushs |2.4.G.2| | 1 |
| Subframe mounting prescribed area is excessively corroded both chassis front to centre area |2.4.A.3| | 1 |
| Electrical wiring insecure under bonnet positive terrminal |1.9.2a| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member holding compansator |6.1.A.1| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement wish bone rear bushes both |2.4.G.2| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Sill
|2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded Sill
|2.4.A.3| | 1 |
| Nearside Front Lower brake caliper securing device missing Retaining bolt |3.5.1j| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis @ front Spring mounting |2.4.A.3| | 1 |
| Brake pipe inadequately clipped Both front to rear |3.6.B.1| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced parts of rear chassis as marked |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced all parts of underbody as marked with yellow chalk |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Next to front leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Next to rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 1 |
| Offside Suspension arm rubber bush deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 1 |
| Exhaust system not adequately supported Rear end corroded and broken off |7.1.1| | 1 |
| Fuel tank insecure tank straps corroded and broken |7.2.1| | 1 |
| Nearside Rear Direction indicator incorrect colour showing white light |1.4.A.2f| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around load sensing valve |6.1.A.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing valence area |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill x 2 |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion sill area |6.1.C.1| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded valence area |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember at three locations - as marked |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel in engine bay next to exhaust - as marked |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill - as marked |6.1.B.2| | 1 |
| Front Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 1 |
| Nearside Headlamp adversely affected by the operation of another lamp wrongly wired |1.7.5c| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill |6.1.B.2| | 1 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting insecure hole worn |2.4.G.1| | 1 |
| Nearside Front Shock absorbers damaged to the extent that it does not function (5.3.2 (b)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing most rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side poor (1.4.1 (a)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2| | 1 |
| Nearside Front front brake juddering severely |3.8.A.2b| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill variuos places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rearmost (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Corner panel |5.3.6 |a| |ii|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x 3 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch chassis |5.3.6 |a| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear bed mountings inadequate |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength large hole in cross-member within 30cm of suspension components (5.3.6 (a) (i)) | 1 |
| Rear fog lamp adversely affected by the operation of another lamp when switched on reversing lam comes on |1.3.2f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut tower |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement Dbush |2.4.G.2| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear bushes |2.4.G.2| | 1 |
| Offside Rear Brake pipe inadequately supported axle pipe & fitted incorrectly around spring |3.6.B.1| | 1 |
| Nearside Front Outer Seat belt not functioning as intended and centre belt (7.1.2 (c)) | 1 |
| Front Brake hose excessively twisted both sides (1.1.12 (b) (ii)) | 1 |
| Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength both sides and floor (5.3.6 (a) (i)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system and rear where new pipes not tightened (1.1.11 (b) (ii)) | 1 |
| Offside Inner Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack end (2.3 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step panel (7.1.1 (a) (i)) | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door post |6.2.2 |d| |i|| | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab |6.2.2 |d| |i|| | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab |6.2.2 |d| |i|| | 1 |
| Brake pipe likely to become detached or damaged front to back (1.1.11 (d) (ii)) | 1 |
| Offside Rear Outer Integral body structure is deformed and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure is deformed and structural rigidity is significantly reduced step (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure is deformed and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Rear Integral body structure is deformed and structural rigidity is significantly reduced cross member center (6.1.1 (a) (i)) | 1 |
| Rear Integral body structure is deformed and structural rigidity is significantly reduced middle cross member center (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure is deformed and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail by anti roll bar |2.4.A.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/inner sill/arch (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill rear of cab (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member in front of spare wheel (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch. spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake cable damaged and fouling the road wheel (1.1.15 (a)) | 1 |
| Offside Brake cable damaged (1.1.15 (a)) | 1 |
| Offside Rear Braking system leaking Pipe on axle @ clip |3.6.A.1| | 1 |
| Fuel tank insecure Strap missing |7.2.1| | 1 |
| Anti-roll bar pin or bush excessively worn Rear D bushes |5.3.4 |a| |i|| | 1 |
| Exhaust system not adequately supported Rear section |7.1.1| | 1 |
| Offside Front Body component corroded and likely to cause injury wing holed and corroded (6.2.1 (a) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner Sill corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing area holed (6.2.2 (d) (i)) | 1 |
| Offside Lower Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Lower Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around the leaf spring shackle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around leaf spring shackle |6.1.B.2| | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity Short circuit |4.2.3 |b| |ii|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn inner rear |5.3.4 |a| |i|| | 1 |
| Offside Rear Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded x member |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear bush |2.4.G.2| | 1 |
| Fuel system component leaking all injectors |7.2.3| | 1 |
| Statutory seat belt missing both offside rear stalks |5.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced bothsides outer and inner sills plus near side end of sill /x member (7.1.1 (a) (i)) | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp Indicator & side on same lamp |1.2.1f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded valance and spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired spring mount patch not welded all way round |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/lower step on underside of vehicle |5.2.6| | 1 |
| Offside Front Steering rack damaged and unserviceable |2.2.C.1c| | 1 |
| Offside Front Brake master cylinder leaking hydraulic fluid |3.6.C.1f| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis area near engine mounting |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor near shock absorber mounting area |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear spring rear mountings |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear bush |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner outter seal |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outter seal |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded nsr osr floor corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leave spring rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near leave spring mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to floor |2.4.A.3| | 1 |
| Offside Front Brake cable has restricted free movement |3.5.1k| | 1 |
| Offside Inner Rear Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Lower Suspension component mounting prescribed area is excessively corroded outer sil |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of rear wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded all floor arch and suspension components mounting excessively corroded |2.4.A.3| | 1 |
| Centre Rear Inner Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Outline marker lamp missing centre |4.2.1 |a|| | 1 |
| Offside Outline marker lamp not working centre |4.2.1 |a|| | 1 |
| Centre Rear Front drive shaft coupling flexible rubber or fabric coupling fouling any other part of the vehicle |2.5.C.1e| | 1 |
| Rear Shock absorbers has a serious fluid leak Both sides (5.3.2 (b)) | 1 |
| Rear Leaf spring damaged and permanently distorted |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quater pannel |2.4.A.3| | 1 |
| Nearside Rear Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Position lamp not working ALL (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and cross member |2.4.A.3| | 1 |
| Fuel tank insecure straps corroded x 2 |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front chassis |2.4.A.3| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both rear D bushes |2.4.G.2| | 1 |
| Front Suspension arm has excessive play in a ball joint both front |2.4.G.2| | 1 |
| Offside Front rear brake juddering severely |3.7.A.5b| | 1 |
| Power steering pipe/hose corroded such that the steering is adversely affected power steering pipes excessive corroded (2.1.5 (g) (ii)) | 1 |
| Offside Rear Leaf spring anchor pin or bush excessively worn front bush perished (5.3.4 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn front bush perished (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by step (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by step (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail by fuel tank bracket (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by front spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced near tow eye (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear hanger (5.3.6 (a) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed in 2 places (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn worn in hub (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arched corroded front and rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill under step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Windscreen in an unacceptable condition CRACKED |3.2 |c| |i|| | 1 |
| Front Upper Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 1 |
| Offside Front Inner Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Nearside Body has a sharp edge caused by corrosion front wing |6.1.C.1| | 1 |
| Position lamp showing white light to the rear multiple lamps |4.2.3 |a| |ii|| | 1 |
| Brake valve leaking Load sensing valve |1.1.7 |d| |i|| | 1 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 1 |
| Headlamp levelling device obviously defective adjusters constantly trying to lower aim |1.7.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill below side door |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch area in front of wheel |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill behind front step |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill in front of rear wheel |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member behind rear bumper |2.4.A.3| | 1 |
| Headlamp levelling device obviously defective |1.7.2| | 1 |
| Central Exhaust has a major leak of exhaust gases box split open |7.1.2| | 1 |
| Fluid leaking continuously posing a serious risk to road safety power steering (8.4.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear back panel (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement arm rear bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of strut top mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of strut top mounting (5.3.6 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn 2nd bearing (6.1.7 (b) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis by rear brake pipe mount |6.1.B.2| | 1 |
| Fuel cap/sealing device ineffective fuel cap not locking to make a seal (6.1.3 (b) (i)) | 1 |
| Headlamp levelling device inoperative thumb wheel on dash has no effect (4.1.5 (a)) | 1 |
| Nearside Front Body component corroded and likely to cause injury wing / wheel arch area (6.2.1 (a) (i)) | 1 |
| Windscreen damaged and affecting the drivers view of the road windscreen cracked over 40mm in swept area on nearside (3.2 (a) (ii)) | 1 |
| Prop shaft bearing excessively worn centre prop bearing (6.1.7 (b) (i)) | 1 |
| Offside Rear Leaf spring fractured leaf spring front eye broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Leaf spring shackle pin or bush likely to become detached front bush (at broken eye) (5.3.4 (a) (ii)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp flashing with indicator (4.2.3 (c)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower step/inner sill corroded and separated (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/ floor pan corroded excessively (7.1.1 (a) (i)) | 1 |
| Prop shaft bearing housing likely to fail front prop bearing rubber housing failed/split (6.1.7 (f) (ii)) | 1 |
| Exhaust system not adequately supported rear mounting broken |7.1.1| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear chassis crossmember |6.6.6| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i)) | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg at foot well |6.1.B.2| | 1 |
| Offside Front Body has a projection caused by corrosion chassis leg at foot well |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front hanger for leaf spring |6.1.B.2| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened leaf spring mounting |2.4.B.6d| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside sills |6.1.B.2| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and step (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER STEP (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure D BUSH (5.3.3 (a) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure D BUSH (5.3.3 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor / sill step area |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring mounting |2.4.A.3| | 1 |
| Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Passenger door cannot be opened from outside the vehicle |6.5.11a| | 1 |
| Centre Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
| Offside Rear Direction indicator not in good working order |not working| |1.5.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded corrosion hole within 30cm of top shock absorber mounting |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides front&rear |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg chalked |6.1.A.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s front and rear leaf spring hanger chalked/ |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r and front leaf sring hanger chalked/ |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above spare wheel |6.1.B.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases both boxes |7.1.2| | 1 |
| Offside Rear Outline marker lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings rear chassis to rear crossmember |6.1.B.2| | 1 |
| Front Braking system leaking at master cylinder |3.6.A.1| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded near engine mount |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch/floor (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Headlamp aim not tested Os ns (4.1.2 (b)) | 1 |
| Offside Front Driver`s door cannot be opened from inside the vehicle |6.2.3 |a|| | 1 |
| Central Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front Body panel insecure (6.2.1 (a) (i)) | 1 |
| Offside Rear Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear inner sills |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at chassis by suspension (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at chassis by suspension (6.2.2 (d) (i)) | 1 |
| Centre Rear Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 1 |
| Nearside Front Coil spring not correctly located top mount incorrect |2.4.C.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded near side front floor area between chassis rail and inner sill area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s sill |5.2.6| | 1 |
| Front Inner Seat belt anchorage prescribed area is excessively corroded both steps |5.2.6| | 1 |
| Offside Outer Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch |6.2.2 |d| |ii|| | 1 |
| Front Suspension component pin or bush likely to become detached x two |5.3.4 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired flicth |2.4.A.3| | 1 |
| Centre Exhaust has a major leak of exhaust gases BOXES |7.1.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded various places |2.4.A.3| | 1 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both D bush`s (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect NO IMAGE (4.1.2 (c)) | 1 |
| Offside Front Body panel likely to become detached WING (6.2.1 (a) (ii)) | 1 |
| Nearside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Brake valve leaking Brake load sensing valve (1.1.7 (d) (i)) | 1 |
| Nearside Stop lamp(s) all missing (4.3.1 (a) (iii)) | 1 |
| Offside Front Position lamp not working top marker |4.2.1 |a|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i|| | 1 |
| Front Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassi corroded |6.2.2 |d| |i|| | 1 |
| Nearside Headlamp aim not tested |1.6| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` ITEM ACROSS UPPER SECTION OF WINDSCREEN AND IN CENTER UPPER SECTION |8.3.1b| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded SUSPENSION MOUNTING |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILLS AND FRONT STEP AREA |6.1.B.2| | 1 |
| Offside Front passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Emissions not tested ENGINE COMPONENT/FAN ASSEMBLY EXCESSIVELY WORN . MAY CAUSE DAMAGE TO VEHICLE. |7.4.B.1| | 1 |
| Nearside Rear Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured inner w arch |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under inner wheel arch |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under inner wheel arch |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis around front spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis around rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis around rear spring hanger |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member between chassis mounts under the rear bumper |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member from front spring hanger to inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis from front step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger from chassis to petrol tank mounting point |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear outer sill holed and corroded in various places |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear outer sill holed and corroded in various places |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill holed and corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill holed and corroed |6.1.B.2| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp all |1.4.A.2h| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp all |1.2.1f| | 1 |
| Offside Front Drag link end ball joint has excessive play inner tie rod |2.2.B.1f| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Front Bonnet retaining device ineffective unable to open |8.4.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced very corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced very corroded |7.1.1 |a| |i|| | 1 |
| Central Rear Fuel tank insecure tank straps corroded |6.1.3 |a| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep |6.1.1 |c| |i|| | 1 |
| Offside Rear Hydraulic fluid leaking excessively brake cylinder |8.4.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill+door sill |marked yellow| |5.2.6| | 1 |
| Nearside Rear Stop lamp not working earth problem |1.2.1b| | 1 |
| Offside Rear Stop lamp not working earth problem |1.2.1b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect bulb fitted incorrect |1.8.A.1b| | 1 |
| Offside Rear position lamp|s| not working earth problem |1.1.A.3b| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis [front of rear spring] (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis [near springhanger] (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep (6.1.1 (c) (i)) | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| both tie rod ends [rack ends] |2.2.A.1b| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced skirt (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced skirt (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Floor excessively deteriorated sill (6.2.4 (a) (i)) | 1 |
| Nearside Front Floor excessively deteriorated sill (6.2.4 (a) (i)) | 1 |
| Offside Front Floor excessively deteriorated sill (6.2.4 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering near tank |6.1.A.1| | 1 |
| Nearside Front Driver`s view to side impaired by crack |6.9.1b| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis corroded |3.6.C.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quarter panel arch area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quarter panel arch area (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced back up sill within 30cm of chassis outrigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced back up sill within 30cm of chassis outrigger (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill within 30cm of chassis outrigger (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill within 30cm of chassis outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings backup sill |6.1.B.2| | 1 |
| Front Brake pipe modified and seriously weakened |3.6.A.3| | 1 |
| Bonnet cannot be secured in the closed position and will not open |8.4.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg inner and outer |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg and out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill not welded to vehicle |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner door steps |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner door step broken away |5.2.6| | 1 |
| Offside Front Brake pipe inadequately supported and hose |3.6.B.1| | 1 |
| Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |door aperture| |5.2.6| | 1 |
| Nearside Body has a sharp edge caused by corrosion drop side in 4 areas |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion drop side in 2 areas |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion rear body |6.1.C.1| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Side chassis |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Side chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor by shockabsorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Floor by shock absorber |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded crossmber |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded upper step |5.2.6| | 1 |
| Nearside Power steering component|s| leaking rack |2.3.3b| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill under car |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded chassis x 2 |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outrigger x 2 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under arch in several places |2.4.A.3| | 1 |
| Offside Rear Tie bar/rod synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated no reserve travel |1.1.6 |d|| | 1 |
| Rear Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Outer Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Outline marker lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 4 (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Body panel damaged and likely to cause injury wing (6.2.1 (a) (i)) | 1 |
| Front Headlamp aim beam image obviously incorrect 2 |1.8.A.1b| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is inadequately repaired crossmember |3.1.9| | 1 |
| Centre Front Brake linkage excessively corroded and seriously weakened |3.5.1e| | 1 |
| Front Macpherson strut insecure |2.4.G.1| | 1 |
| Offside Front Position lamp switch insecure |1.1.A.1| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded handbrake mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded spring mounting inner wing area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear anchorage point |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg structure |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded inner sill/ step |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component corroded and seriously weakened chassis (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component corroded and seriously weakened chassis (5.3.3 (b) (i)) | 1 |
| Nearside Suspension component corroded and seriously weakened inner and outer sill (5.3.3 (b) (i)) | 1 |
| Nearside Rear Suspension component corroded and seriously weakened 1/4 panel (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component corroded and seriously weakened 1/4 panel (5.3.3 (b) (i)) | 1 |
| Nearside Rear Suspension component corroded and seriously weakened behind wheel (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component corroded and seriously weakened behind wheel (5.3.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |SILL| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |LEAF SPRING MOUNTING| |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |LEAF SPRING MOUNTING| |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |SILL| |6.1.B.2| | 1 |
| Offside Brake back plate|s| locking device insecure |3.5.1l| | 1 |
| Nearside Brake back plate|s| locking device insecure |3.5.1l| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under doorstep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under doorstep |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill and under sill |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring hanger |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis at brake compensator area |3.3.A.2| | 1 |
| Nearside Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill, next to rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill, next to rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch, at bottem and at top next to spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch in two places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, at rear of arch and at front of arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch in 4 places around arch (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S and O/S front lower door steps excessive corrosion (6.1.1 (c) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill under outrigger |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central and rear inner sill |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush bracket bolts loose |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail around engine mount subframe |6.1.A.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger rear of cab |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger rear of cab |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside of door step |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced STEP (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced STEP (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Nearside Front Lower Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind rear wheel |5.3.6 |a| |i|| | 1 |
| Fuel tank insecure Tank straps corroded |6.1.3 |a| |i|| | 1 |
| Hydraulic fluid leaking excessively Power steering fluid (8.4.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer rigger |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at rear spring mount DANGEROUS |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at front spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Braking system leaking hub wet |3.6.A.1| | 1 |
| Offside Outline marker lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded door step sill |5.2.6| | 1 |
| Offside Rear Leaf spring cracked lower spring |2.4.B.1a| | 1 |
| Offside Front Brake disc significantly and obviously worn Inner face |1.1.14 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit Plate value 1.19 |8.2.2.2 |a|| | 1 |
| Offside Front Service brake excessively binding Slow to release after service brake applied. |1.2.1 |f|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 30cm from leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 30cm from leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember 30cm from leaf spring mounting |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step panel underside lower |6.1.B.2| | 1 |
| Nearside Rear Service brake excessively binding parking brake not releasing fully |1.2.1 |f|| | 1 |
| Offside Front Body has a sharp edge caused by corrosion REAR |6.1.C.1| | 1 |
| Rear rear brake recording little or no effort X 2 |3.7.B.5a| | 1 |
| Central Braking system leaking brake pipe |3.6.A.1| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both side |2.4.G.2| | 1 |
| Nearside Front Outline marker lamp not working cab |4.2.1 |a|| | 1 |
| Offside Front Outline marker lamp not working cab |4.2.1 |a|| | 1 |
| Offside Driver`s seat insecure rivet missing from seat frame |6.2.A.1| | 1 |
| Battery insecure under drivers seat |1.9.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 areas (5.3.6 (a) (i)) | 1 |
| Front Power steering pipe|s| or hose|s| leaking fluid cooler area |2.3.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor. (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked. |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch tub lower. chalked. |5.3.6 |a| |i|| | 1 |
| Rear Service brake effort inadequate at a wheel n/s and o/s rear. |1.2.1 |a| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured Front spring eye..... (5.3.1 (b) (ii)) | 1 |
| Rear Towbar component defective socket missing (6.1.6 (a)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner step/sill...chalked |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step,under vehicle, chalked |5.2.6| | 1 |
| Nearside Rear Lower passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Rear Body component likely to become detached mud guards (6.2.1 (a) (ii)) | 1 |
| Offside Rear Lower Cab insecure (6.2.2 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis out rigger chalked in yellow |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both corner rear valances chalked in yellow |6.1.1 |c| |i|| | 1 |
| Offside Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill, chalked in yellow |5.3.6 |a| |ii|| | 1 |
| Power steering component insecure bottle |2.1.5 |d| |i|| | 1 |
| Service brake effort inadequate at a wheel rear axle not enough effort to meet requirements |1.2.1 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected Chassis leg below brake servo, marked with chalk (1.1.21 (e) (ii)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked in yellow (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear sections of sill (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear chassis out riggers before spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger chalked in yellow (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill chalked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail at side of exhaust chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer rear sill marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill below passenger front step corroded marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Front Sub-frame insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid wheel cylinder |1.1.16 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis crossmember |6.1.B.2| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step area both sides (7.1.1 (a) (i)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (floor to step area) (7.1.1 (a) (i)) | 1 |
| Rear Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Exhaust has a major leak of exhaust gases Broken downpipe |7.1.2| | 1 |
| Nearside Rear Lower Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both "D" bushes |2.4.G.2| | 1 |
| Front Front suspension has excessive play in a lower suspension ball joint boths sides |2.5.B.1a| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of cab |6.1.B.2| | 1 |
| Brake disc significantly and obviously worn O/S AND N/S FRONT (1.1.14 (a) (i)) | 1 |
| Nearside Rear Intermediate drop arm pivot housing casing not properly attached n/s/r link arm loose into anti roll bar bottom (2.1.2 (a) (i)) | 1 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view n/s door mirror cracked (3.3 (b) (ii)) | 1 |
| Offside Rear Rear fog lamp with a multiple light source more than 1/2 not functioning o/s/r fog light inoperative (4.5.1 (a) (ii)) | 1 |
| Nearside Stop lamp(s) not working n/s/r brake light inoperative (4.3.1 (a) (ii)) | 1 |
| Front Windscreen wiper blade missing both front wipers not clearing windscreen effectively (3.4 (b) (ii)) | 1 |
| Horn not working horn not working (7.7 (a) (ii)) | 1 |
| Offside Headlamp aim beam image obviously incorrect not properly fitted |1.8.A.1b| | 1 |
| Nearside Rear Direction indicator incorrect colour lense cracked showing white light. |1.4.A.2f| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded lower sills |5.2.6| | 1 |
| Nearside Rear Position lamp showing white light to the rear due to a damaged lens (4.2.3 (a) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner chassis leg next to engine mount |6.2.2 |d| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded crossmember both ends |2.4.A.3| | 1 |
| Rear Passengers seat insecure insecure (6.2.6 (a) (ii)) | 1 |
| Offside Rear Bumper likely to become detached wheel arch (6.1.4 (a) (ii)) | 1 |
| Central Rear Seat belt flexible stalk damaged stalk missing (7.1.2 (b) (i)) | 1 |
| Offside Rear Seat belt buckle missing stalk missing (7.1.2 (d)) | 1 |
| Nearside Front Upper Outline marker lamp not working top of cab (4.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure modified such that structural rigidity is significantly reduced chassis has been cut (6.1.1 (d) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Centre Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind subframe (6.1.1 (c) (i)) | 1 |
| Front Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Front Front position lamp|s| not working side lamp |1.1.A.3b| | 1 |
| Offside Rear Front position lamp|s| not working side lamp |1.1.A.3b| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view mirror glass damaged |8.1.2a| | 1 |
| Sub-frame locating pin insecure bolts loose |2.4.G.3a| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury (6.2.8 (a) (ii)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x3 (7.1.1 (a) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount floor |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded hand brake cable mount |3.1.9| | 1 |
| Front Windscreen wiper not operating automatically when switched on Both |8.2.1b| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting cross member |6.6.6| | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp with stop light |1.3.2f| | 1 |
| Offside Front Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 1 |
| Offside Outline marker lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body/outer sill holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed near shocker mounting |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember holed near spring mounting |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor holed near shocker mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed |6.2.2 |d| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail holed |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Driver`s airbag obviously defective light donating a light |5.4.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect no beam pattern |1.8.A.1b| | 1 |
| Rear Prop shaft joint excessively worn uj (6.1.7 (c) (i)) | 1 |
| Central Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine crossmember |6.1.B.2| | 1 |
| Brake performance not tested brake pipe leaking |3.7.A.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear of |2.4.G.2| | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users black smoke |8.2.2.2 |c|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 1 |
| Fuel tank insecure Rear tank strap fractured. (6.1.3 (a) (i)) | 1 |
| Rear All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Lower Anti-roll bar linkage ball joint excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Supplementary restraint system warning lamp indicates a fault airbag (7.1.6 (a)) | 1 |
| Offside Rear Lower Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Anti-roll bar locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Cab floor |5.2.6| | 1 |
| Fuel tank insecure Rear tank support strap excessively corroded |7.2.1| | 1 |
| Body has a sharp edge caused by corrosion load platform and drop sides |6.1.C.1| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill. Yellow marked. |6.2.2 |d| |i|| | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. Yellow marked. |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill. Yellow marked. |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of cab. Yellow marked. |6.1.1 |c| |i|| | 1 |
| Nearside Front Upper Outline marker lamp not working Roof marker |4.2.1 |a| |ii|| | 1 |
| Offside Front Upper Outline marker lamp not working Roof marker |4.2.1 |a| |ii|| | 1 |
| Offside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced inner sill |6.1.1 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced inner sill |6.1.1 |a| |i|| | 1 |
| Nearside Front Outer Integral body structure is fractured and structural rigidity is significantly reduced outer sill |6.1.1 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing area holed in 3 places (5.3.6 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing holed (5.3.6 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member holed (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Position lamp not working marker light (4.2.1 (a) (ii)) | 1 |
| Nearside Direction indicator lens defective such that the emitted light is adversely affected lens smashed (4.4.1 (b) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor adjoining door step (7.1.1 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected crossmember near handbrake cable retaining mount (1.1.21 (e) (ii)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor joining door step (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg as chassis meets bulkhead (6.1.1 (c) (i)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member at rear of cab (1.1.21 (e) (i)) | 1 |
| Front drive shaft coupling bearing fastener fractured |2.5.C.2b| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn prop shaft |2.4.G.4d| | 1 |
| Rear Body insecure and dangerous to other road users tipper body badly corroded |6.1.B.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step / under sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step / under sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected wheel cylinder |1.1.7 |d| |ii|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced steps |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis ladder rail |6.1.B.2| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring hangers both sides (6.1.1 (c) (i)) | 1 |
| Rear Service brake excessively fluctuating both sides (1.2.1 (e)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Front Steering column shaft locking device insecure |2.1.6| | 1 |
| Offside Rear Headlamp flickers when tapped lightly by hand |1.2.4c| | 1 |
| Nearside Front front brake recording little or no effort brake inop |3.7.B.5a| | 1 |
| Nearside Rear rear brake recording little or no effort inop |3.7.B.5a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear box missing |7.1.4| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill holed and corroded |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill holed and corroded |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill holed and corroded |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill holed and corroded |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner wing holed and corroded |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded wing holed and corroded |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg holed and corroded |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke emissions not tested due to not having a exhaust connected to engine |7.4.B.3a| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring hanger marked yellow four holes |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured REAR OF CENTRE LEAF |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf at front |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf at rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf at rear |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is inadequately repaired rear chassi |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is inadequately repaired rear chassi |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is inadequately repaired front chassi two areas and lower inner sill
as marked |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mount |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Outer Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Outer Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension unit leaking strutt (5.3.5 (c)) | 1 |
| Offside Front Suspension unit leaking strut (5.3.5 (c)) | 1 |
| Offside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner quarter. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill. |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch. |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Passenger floorwell. |6.1.B.2| | 1 |
| Nearside Outer Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded and offside inner sill |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings i/sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis u/bonnet |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings u/side step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings u/step |6.1.B.2| | 1 |
| Offside Steering locking device missing track rod |2.2.C.1g| | 1 |
| Inner Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Inner Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonit chasi leg |6.1.B.2| | 1 |
| Fuel tank insecure tank strap broke |7.2.1| | 1 |
| Central Rear Brake valve leaking brake sensing valve |3.6.A.1| | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement transmission/engine movement |6.1.8 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer body sill/closing sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured Spring eye |2.4.B.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side of chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side of chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis rail (6.1.1 (c) (i)) | 1 |
| Power steering malfunctioning pump noisy and steering juddering (2.1.5 (a)) | 1 |
| Headlamp levelling device inoperative both head lamps (4.1.5 (a)) | 1 |
| Offside engine mounting bracket insecure and likely to fail area engine mount fixed to heavly corroded |6.1.D.1b| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings chass leg |6.1.B.2| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings chass legg |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wheel arches |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings wheel arches |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings box sec |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings box sec |6.1.B.2| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r and o/s/r box section, inner arch/ floor, inner sill. |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f and o/s/f inner arch |2.4.A.3| | 1 |
| Floor excessively deteriorated o/s/f step (6.2.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outter sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Leaf spring splayed and fouling rear mounting |2.4.B.1c| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP CORRODED AND HOLED (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced TANK STRAP TO CHASSIS (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING (6.1.1 (c) (i)) | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.6| | 1 |
| Offside Rear Obligatory mirror seriously damaged affecting the rear view |6.6.1b| | 1 |
| Offside Inner Statutory seat belt missing |5.1.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch - sharp edges |6.1.C.1| | 1 |
| Offside Front Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside front and side doors inner step area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside and offside outer sills |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear crossmember |2.4.A.3| | 1 |
| Nearside Front Driving control|s| clutch pedal anti-slip provision loose |6.8.3| | 1 |
| Offside Power steering pipe|s| or hose|s| excessively damaged |2.3.1c| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside inner chassis at engine cradle |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside inner wing |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases rear section |6.1.2 |a|| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view driver side |8.1.2a| | 1 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view passenger side |8.1.2a| | 1 |
| Front Headlamp aim beam image obviously incorrect n/s-o/s |1.8.A.1b| | 1 |
| Nearside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Leaf spring eye defective |anchor| snaped |2.4.B.1b| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases missing |7.1.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill inner and outer |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all inner sill x rear |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all outrigers x main chassis |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near seat belt anchor (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near seat belt anchor (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front of leaf spring (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear of leaf spring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near leaf spring (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near strut (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion sill/wheel arch |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill to step |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill to step |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer wheel arch |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer wheel arch |2.4.A.3| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded inner door step |5.2.6| | 1 |
| Nearside Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Parking brake lever has no reserve travel cable brocken |3.1.6b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill holed and coroded |5.2.6| | 1 |
| Power steering component|s| inappropriately modified |2.3.7| | 1 |
| Offside Front Track rod end ball joint has excessive play rubber boot no longer prevents ingrease of dirt |2.2.B.1f| | 1 |
| Nearside Front Inner Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Rear fog lamp does not emit a steady red light both white light broken lens |1.3.2e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount inner sill and out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis shock absorber mount |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under cab (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount inner wheel arch |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking high pressure pump in engine bay |7.2.3| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp by indicator (4.2.3 (c)) | 1 |
| Brake valve leaking such that brake functionality is affected load sensing valve (1.1.7 (d) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to rear leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /floor section |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor section |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring rear mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis by spring rear mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn front bush |5.3.4 |a| |i|| | 1 |
| Central Front Seat belt damaged Middle seat beat buckle is damaged and does not allow seatbelt to click in (7.1.2 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Leaf spring mounting point is corroded and exposing a hole (5.3.6 (a) (ii)) | 1 |
| Front Fuel system component leaking Fuel system leaking - Excessive oil leak on front of engine (6.1.3 (b) (i)) | 1 |
| Offside Rear Service brake excessively binding Excessive bind to road wheel (1.2.1 (f)) | 1 |
| Offside Front Track rod end ball joint has excessive play Ball joint cover split and perished - Preventing the ingress of dirt and grease (2.1.3 (b) (i)) | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill under side loading door |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan with in 30 cm of seat mounting |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake hose damaged and likely to fail not secure (1.1.12 (a)) | 1 |
| Front Vehicle structure is fractured and structural rigidity is significantly reduced x member not supporting inter cooler /rad (6.1.1 (a) (i)) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture and engine bay no pipes secured all just hanging (1.1.11 (a)) | 1 |
| Centre Front Upper Braking system leaking |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced front of cab inner sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced middle of cab inner sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab inner sill (7.1.1 (a) (i)) | 1 |
| Central Front Statutory seat belt missing floor section missing |5.1.1| | 1 |
| Central Rear Exhaust system not adequately supported nearside rubber split |7.1.1| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp indicators |1.2.1f| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger in front of rear axle |6.1.B.2| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn BOTH |5.3.4 |a| |i|| | 1 |
| Emissions not tested too much smoke |8.2.2.2 |e|| | 1 |
| Front Anti-roll bar worn and seriously weakened |2.4.G.1| | 1 |
| Exhaust system not adequately supported tail pipe bracket corroded off |7.1.1| | 1 |
| Exhaust has a major leak of exhaust gases slincer |7.1.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis next to tank mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting Cross member (6.1.6 (i) (i)) | 1 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting Cross member (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarches |2.4.A.3| | 1 |
| Nearside Front Body insecure and dangerous to other road users Bumper loose and insecure |6.1.B.1b| | 1 |
| Offside Front Body insecure and dangerous to other road users Bumper loose and insecure |6.1.B.1b| | 1 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance very dim |1.1.A.3d| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under step/inner sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sills front to rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis box section out rigger by rear spring mounting |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outer sills front to rear |2.4.A.3| | 1 |
| Fuel system component leaking excessive leak around engine |7.2.3| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion volance WING |6.1.C.1| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion STEP |6.1.C.1| | 1 |
| Offside Rear Inner Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings centre chassis |6.1.B.2| | 1 |
| Brake pipe inadequately clipped insecure under bonnet |3.6.B.1| | 1 |
| Nearside Vehicle structure has damage which adversely affects braking or steering inner/outer sill and chassis leg |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner/outer sill, chassis leg and rear outrigger |6.1.A.1| | 1 |
| Nearside Front Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced back of cab (7.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp likely to become detached light board corroded (4.2.1 (c) (ii)) | 1 |
| Nearside Rear Position lamp likely to become detached light board corroded (4.2.1 (c) (ii)) | 1 |
| Nearside Rear Road wheel fixing loose stud/ nut (5.2.1 (a) (i)) | 1 |
| Nearside Front Road wheel fixing missing stud (5.2.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush likely to become detached d bush bolts loose/ missing (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember - next to leaf spring anchor bush (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember - next to leaf spring anchor bush (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Brake pipe leaking on a hydraulic braking system load valve to flexy (1.1.11 (b) (ii)) | 1 |
| Front Brake cable insecure cable pulled through floor (1.1.15 (c)) | 1 |
| Offside Rear Anti-roll bar likely to become detached (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Body (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Body (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure is fractured and structural rigidity is significantly reduced Body hinge (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn Both (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring anchor pin or bush excessively worn Both (5.3.4 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn x two (5.3.4 (a) (i)) | 1 |
| Rear Exhaust system insecure rear box (6.1.2 (a)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering x2 |6.1.A.1| | 1 |
| Front Suspension arm pin or bush excessively worn x two (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie (6.2.2 (d) (i)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush x2 D bushes |2.4.G.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s step + o/s/f inner wing + o/s/f chassis |next to subframe mount| |6.1.B.2| | 1 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing twisted |5.2.2a| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded lsv |3.3.A.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill/step (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Lower Steering column attachment defective (2.2.2 (d) (i)) | 1 |
| Fuel pipe leaking excessively or a risk of fire no 1 injecter |6.1.3 |b| |ii|| | 1 |
| Offside Front Fuel pipe union leaking |6.1.3 |b| |i|| | 1 |
| Fuel pipe union leaking no 1 injecter |6.1.3 |b| |i|| | 1 |
| Offside Front Brake hose leaking on a hydraulic braking system to caliper |1.1.12 |c| |ii|| | 1 |
| Nearside Rear Towbar component defective (6.1.6 (a)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor/underbody |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill marked with choke |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger x2 |5.3.6 |a| |i|| | 1 |
| Rear Position lamp not working Both (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Front Shock absorbers insecurely attached To HUB (5.3.2 (a) (i)) | 1 |
| Prop shaft likely to become detached bolts loose (6.1.7 (a) (ii)) | 1 |
| Offside Seat belt buckle missing (7.1.2 (d)) | 1 |
| Nearside Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Prop shaft badly damaged (6.1.7 (e)) | 1 |
| Electronic braking system warning device inoperative (1.7 (a)) | 1 |
| Offside Inner Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Nearside Inner Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring mount chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side near spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side near spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor wheel arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor wheel arch area |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of front spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring mount cross member |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring mount cross member |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill all |6.1.B.2| | 1 |
| Lower Driver`s door hinge insecure |6.2.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole near wishbone rear bush |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole near wishbone rear bush |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor hole |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings where spare wheel would be hole |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings where spare wheel would be hole |6.1.B.2| | 1 |
| Rear Stop lamp|s| missing |4.3.1 |a| |ii|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides rear under car corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill as marked (6.2.2 (d) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both sides |5.3.6 |a| |ii|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle and front inner sill |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassis crossmember above spare wheel |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Outer Anti-roll bar linkage has excessive play in a pin/bearing joint missing |2.4.G.2| | 1 |
| Offside Rear Outer Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Rear Leaf spring cracked at the front spring eye |2.4.B.1a| | 1 |
| Brake pipe inadequately supported rear cross member corroded |3.6.B.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member in front of the spare wheel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg next to engine mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Stop lamp emits other than a steady red light illuminating indicator |1.2.1e| | 1 |
| Brake pipe inadequately clipped front to rear |above fuel tank| |3.6.B.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door sill to floor (7.1.1 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded ns and os x member |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill from front to back |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded in front of wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nsf and osf inner arch |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis cross member nearside and offside |2.4.A.3| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect beam kick up to right |4.1.2 |c|| | 1 |
| Central Prop shaft bearing excessively worn mounting |6.1.7 |b| |i|| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D bush on axle |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D bush on axle |2.4.G.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both sides front steps |6.2.2 |d| |i|| | 1 |
| Body mounting fixings missing such that stability is seriously impaired Load bed |6.2.2 |c| |ii|| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Dip is main beam - main beam is dip (4.1.2 (c)) | 1 |
| Outline marker lamp not working Both sides front |4.2.1 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by engine mounting (6.1.1 (c) (i)) | 1 |
| Nearside Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle handle broken |6.2.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing /arch areas 2 places |2.4.A.3| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter panel |6.1.B.2| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings excessive welding ns and os inner and outer sills |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer door sills |6.1.B.2| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings ns inner door step |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis rear spare wheel chassis |6.1.B.2| | 1 |
| Front wheel bearing has excessive play ns front |2.5.A.3c| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower quarter panel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure nut |2.4.G.1| | 1 |
| Front Upper Front position lamp|s| not working both sides |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working wing |1.1.A.3b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced lens |1.7.5a| | 1 |
| Offside Front Driver`s seat insecure rail bolt insecure o/s/r |6.2.A.1| | 1 |
| Offside Front Lower Ball joint has excessive play on rock test |2.2.B.1f| | 1 |
| Emissions not tested BLACK SMOKE 1.19 |8.2.2.2 |e|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn REAR WISH BONE BUSH + | SUSPECT BOLT MAY HAVE BACKED OFF SLIGHTLY |5.3.4 |a| |i|| | 1 |
| Nearside Front Headlamp insecure Do too bolt missing in panel |1.7.3| | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced faulty when position lights on |4.4.3 |a|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step underneath |7.1.1 |a| |i|| | 1 |
| Offside Front Body panel damaged and likely to cause injury Wing |6.2.1 |a| |i|| | 1 |
| Offside Body panel damaged and likely to cause injury mirror head damage |6.2.1 |a| |i|| | 1 |
| Rear Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Headlamp not working on main beam BOTH |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on dipped beam BOTH |4.1.1 |a| |ii|| | 1 |
| Nearside Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn REAR WISHBONE BUSH + SUSPECT BOLT HAS BACKED OFF |5.3.4 |a| |i|| | 1 |
| Central Prop shaft bearing excessively worn REARMOST OF THE CENTRE BEARINGS (6.1.7 (b) (i)) | 1 |
| Emissions not tested EXCESSIVE SMOKE (8.2.2.2 (e)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced TIPPER BODY CHASSIS HOLED AND CORRODED ALONG LENGTH MID WAY TO REAR (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP TO SILL HOLED AND CORRODED (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL WELL AND ARCH HOLED AND CORRODED NEAR TO SUSPENSION MOUNTING (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP TO WHEEL ARCH,STEP TO SILL AND STEP HOLED AND CORRODED (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL WELL AND ARCH HOLED AND CORRODED NEAR TO SUSPENSION MOUNTING (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER AND OUTER SILLS HOLED AND CORRODED INCLUDING REAR STEP (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/strut top area (5.3.6 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury tipper body |6.2.1 |a| |i|| | 1 |
| Offside Body panel corroded and likely to cause injury tipper body |6.2.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail on the top in the engine bay |6.1.1 |c| |i|| | 1 |
| Offside Front Coil spring fractured or broken part of bottom coil broken off (5.3.1 (b) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated centre bearing |6.1.7 |d| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing badly corroded within suspension tower prescribed area. (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing badly corroded within prescribed area of upper suspension tower. (5.3.6 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is fractured and functionality of the braking system is affected Cross member where cable attachment point is at front of vehicle. The whole area is collapsing due to purchase of park brake cable (1.1.21 (e) (ii)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative Load sensing valve is siezed at lever. (1.1.17 (c) (ii)) | 1 |
| Offside Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Nearside Additional braking device damaged |3.6.I.1| | 1 |
| Offside Additional braking device damaged |3.6.I.1| | 1 |
| Brake pedal anti-slip provision worn smooth clutch and brake pedal rubbers |3.3.A.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner sills behind rear wheels corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner wheelarch to floor corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s cab step to inner sill corroded through |6.1.B.2| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view both mirrors broken |8.1.2a| | 1 |
| Fuel tank insecure front tank strap corroded through and broken |7.2.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner quatre |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Valence |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner quatre |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Front Torque/reaction arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Inner Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front Body has a sharp edge caused by damage panel near bonnet lock |6.1.C.1| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER & OUTER SILL (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sill |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Lower Anti-roll bar attachment bracket inappropriately repaired |2.4.A.2| | 1 |
| Front Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced crossmember both sides |6.1.1 |a| |i|| | 1 |
| Rear Bumper damaged and likely to cause injury when grazed or contacted both ends |6.1.4 |a| |i|| | 1 |
| Rear Brake cable inappropriately repaired |3.5.1n| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member in sev places |3.1.9| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor |underside of vehicle| |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 1 |
| Prop shaft likely to become detached centre joint badly worn |6.1.7 |a| |ii|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor |7.1.1 |a| |i|| | 1 |
| Offside Outer Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Front Headlamp levelling device inoperative nearside and offside (4.1.5 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by spring anchor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by spring anchor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sills |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis rail back of engine bay |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front & rear of inner arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn arm back bush bonding gone (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured rear end (5.3.1 (b) (i)) | 1 |
| Offside Integral body structure is deformed and structural rigidity is significantly reduced under seat (6.1.1 (a) (i)) | 1 |
| Rear Fuel tank insecure tank strap (6.1.3 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired off side near side and rear bed supports (6.2.2 (d) (ii)) | 1 |
| Brake servo defective or ineffective pedal hard |1.1.10 |a| |i|| | 1 |
| Body component insecure front bumper |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component insecure wheel guard |6.2.1 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn "d" bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn "d" bush |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar link upper mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Fuel tank insecure broken strap (6.1.3 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch area |6.1.A.1| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn nut loose |5.3.4 |a| |i|| | 1 |
| Rear Prop shaft bearing housing fractured bush round bearing no long atatched |6.1.7 |f| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outter sill |6.2.2 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills as marked |5.2.6| | 1 |
| Prop shaft flexible coupling excessively deteriorated marked yellow |6.1.7 |d| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step marked yellow |7.1.1 |a| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Torque/reaction arm has a deteriorated rubber mounting resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Torque/reaction arm has a deteriorated rubber mounting resulting in excessive movement |2.4.G.2| | 1 |
| Brake valve leaking rear load compensator |3.6.A.1| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn loose (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Seat belt not functioning as intended not attached (7.1.2 (c)) | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush arm rear bush |2.4.G.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed and corroded all the way along |6.1.B.2| | 1 |
| Offside Rear Brake cable has restricted free movement fouling road wheel |1.1.15 |e|| | 1 |
| Nearside Rear Fuel tank insecure tank strap |7.2.1| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn corresponding bar hole elongated (5.3.4 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced within 30 cms of seat mounting point (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member close to antiroll bar drop link mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member close to antiroll bar drop link mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush on subframe |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush on subframe |2.4.G.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Step to Sill |5.2.6| | 1 |
| Offside Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement drop arm bush/pin. |2.4.G.2| | 1 |
| Nearside Rear Leaf spring saddle is fractured cracked.marked. |2.4.B.7a| | 1 |
| Nearside Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring mounting area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring mounting area (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger to body |6.1.A.1| | 1 |
| engine mounting deteriorated resulting in excessive movement engine stabilizer bar |6.1.D.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/step |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Rear Brake cable locking device missing |3.5.1l| | 1 |
| Nearside Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp light fault |1.4.A.2h| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner door step under step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded of rear outrigger |2.4.A.3| | 1 |
| Offside Rear Upper Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Rear Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill and inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis rail between spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Inner Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with yellow crown |6.1.B.2| | 1 |
| Nearside Front Outer Body component insecure rear body |6.2.1 |a| |i|| | 1 |
| Nearside Front Upper Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component corroded and seriously weakened by spring |5.3.3 |b| |i|| | 1 |
| Offside Front Body insecure bumper (6.2.2 (a) (i)) | 1 |
| Offside Body component damaged and likely to cause injury mirror cover missing (6.2.1 (a) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror cover missing (6.2.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 1 |
| Nearside Front Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step inside door shut |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step,sill underside |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded upper inner arch |2.4.A.3| | 1 |
| Brake pipe inadequately clipped under bonnet / chaffing engine and bulkhead |3.6.B.1| | 1 |
| Power steering pipe|s| or hose|s| leaking above subframe |2.3.3b| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis next to fuel tank |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis under cab |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ns inner chassis x 2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Suspension spring mounting prescribed area is excessively corroded excessive corrosion along both o/s and n/s inner sills. o/s and n/s inner wings front and rear. n/s door step. |2.4.A.3| | 1 |
| Offside Outline marker lamp missing centre side marker missing (4.2.1 (a) (ii)) | 1 |
| Power steering pipe/hose leaking at steering rack connections (2.1.5 (a)) | 1 |
| Emissions not tested major exhaust leak. (8.2.2.2 (e)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Rear bush. (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill at step.Various places. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill at step.Various places. (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill at step.Various places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill in various places. (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill in various places. (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside and offside chassis in various places. (6.1.1 (c) (i)) | 1 |
| Front Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Power steering disconnected where it is standard fitment |2.3.3a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded front lower edge inner wheel arch |5.2.6| | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sliding door step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is severely distorted outer sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced chassis corroded behind cab in front of rear wheel (6.1.1 (a) (i)) | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced cross member (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Leaf spring mounting (5.3.6 (a) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner and out sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill at step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill at step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & n/s & o/s front inner wing & n/s & o/s inner & outer sills front to rear & n/s & o/s rear section of inner & outer structure |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake valve |6.1.A.1| | 1 |
| Central Exhaust system not adequately supported middle claimpmissing |7.1.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of/side rear hanger holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering chassis leg hole |6.1.A.1| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings inner wing hole |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing hole |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded poorly welded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded poorly welded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced n/s sill and inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill and inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury Wing sharp edge (6.2.1 (a) (i)) | 1 |
| Nearside Body component corroded and likely to cause injury door sharp edge (6.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill and floor |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and gearbox mounting area |6.1.B.2| | 1 |
| Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings and engine mounting |6.1.B.2| | 1 |
| Nearside Rear Upper Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above subframe mount |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6| | 1 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing outer |5.2.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount x3 |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step x2 |5.2.6| | 1 |
| Offside Front Anti-lock braking system component excessively damaged abs target ring broken |3.4.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength AT FRONT AND REAR OF SPRING MOUNTINGS (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING HANGER AREA (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to floor (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to noisey engine |7.3.A.1| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel well (6.1.1 (c) (i)) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear cross member |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded and Offside front outer sills |5.2.6| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion and Offside front outer wings |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring, front anchorage point |2.4.A.3| | 1 |
| Front Fuel tank insecure strap broken , tank on cross member |7.2.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear |6.1.B.2| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury rear of cab badly corroded has sharp edges also in prescibed area |6.2.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced near door post corroded floor |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced near door post corroded floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Bumper insecure lights cluster has no support on one side due to been corroded |6.1.4 |a| |i|| | 1 |
| Power steering component leaking rack leaking |2.1.5 |a|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting near door post |6.2.2 |d| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member corroded |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion front wing |6.1.C.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member for hand brake cables |3.1.9| | 1 |
| Nearside Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting chassis |6.6.6| | 1 |
| Offside Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting chassis |6.6.6| | 1 |
| Offside Front Inner Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Fuel tank insecure Tank strap broken (6.1.3 (a) (i)) | 1 |
| Vehicle Identification Number incomplete missing
|6.3.5a| | 1 |
| Central Rear Brake pipe leaking on a hydraulic braking system burst during brake test (1.1.11 (b) (ii)) | 1 |
| Offside Rear Lower Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn Arm rear bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn lower arm rear bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Rear position lamp|s| not working side |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis behind wheel (5.3.6 (a) (i)) | 1 |
| Rear Fuel tank insecure tank strap corroded through (6.1.3 (a) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine 5.9 vs 3 max (8.2.2.2 (b)) | 1 |
| Offside Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Nearside Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Outer Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Mechanical brake component locking device missing |3.5.1l| | 1 |
| Centre Rear Upper Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Hazard warning lamps inoperative does not work both sides when operated |1.4.B.1b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering centre crossmember (6.1.1 (c) (ii)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember (6.1.1 (c) (ii)) | 1 |
| Exhaust system insecure Joint behind CAT (6.1.2 (a)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is inadequately repaired Cross member at park cable mount (1.1.21 (e) (i)) | 1 |
| Brake prescribed area is inadequately repaired Chassis at LSV mounting area (1.1.21 (e) (i)) | 1 |
| Prop shaft bearing housing insecure Second bearing collapsed (6.1.7 (f) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inside, top of chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured Front spring eye broken (5.3.1 (b) (ii)) | 1 |
| Service brake excessively fluctuating Rear brakes (1.2.1 (e)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crosss member (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear x member weld not complete |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring (front eye)chassis inside and outside (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring (front eye) chassis inside and outside (5.3.6 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected x-member at fuel tank (1.1.21 (e) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outside and top (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure straps corroded |7.2.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area strength or continuity significantly reduced Door pillar |7.1.1 |a| |i|| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area strength or continuity significantly reduced Door pillar |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Under step (5.3.6 (a) (i)) | 1 |
| Bonnet cannot be secured in the closed position will not reopen |8.4.1| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Offside Front Upper Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure is deformed and structural rigidity is significantly reduced sill form damage (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Position lamp not working and lens missing |4.2.1 |a|| | 1 |
| Central Front Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Rear Body insecure and dangerous to other road users tipper unit excessively corroded |6.1.B.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of step (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of step chassis (7.1.1 (a) (i)) | 1 |
| Centre Front Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced B pillar of cab (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced B pillar of cab (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step (6.1.1 (c) (i)) | 1 |
| Offside Seat belt locking mechanism does not secure or release Driverside |5.2.5a| | 1 |
| Offside Front Windscreen wiper blade missing |3.4 |b| |ii|| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassi rail |2.4.A.3| | 1 |
| Offside Rear Semaphore indicator tell tale not working correctly |1.4.C.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded offside and nearside |2.4.A.3| | 1 |
| Front Subframe mounting prescribed area is excessively corroded offside and nearside |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded offside and nearside |2.4.A.3| | 1 |
| Prop shaft bearing excessively worn foremost |6.1.7 |b| |i|| | 1 |
| Prop shaft bearing excessively worn rear |6.1.7 |b| |i|| | 1 |
| Offside Front Wheel bearing rough when rotated excessive play too |5.1.3 |b| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis area |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around brake load valve |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front & rear ov spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section for shock absorber |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded chassis next to rear spring front mount |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Inner Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outer Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top shocker mounting area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top shocker mounting area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger around leaf spring mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger around leaf spring mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner door step (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner door step (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded under step |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step inner & outer x2 |5.2.6| | 1 |
| Power steering malfunctioning rough |2.3.3a| | 1 |
| Central engine mounting deteriorated resulting in excessive movement gear box |6.1.D.1a| | 1 |
| Offside Front Macpherson strut insecure pinch bolt snapped |2.4.G.1| | 1 |
| Service brake excessively binding Both sides rear (1.2.1 (f)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f/ inner sill holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside middle inner sill holed |6.1.1 |c| |i|| | 1 |
| Track rod end ball joint has excessive play o/s/f/ |2.1.3 |b| |i|| | 1 |
| Suspension arm pin or bush excessively worn n/s/f/ rear wisbone bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill door step |5.2.6| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor / step |6.1.B.2| | 1 |
| Offside Electrical wiring inadequately supported |1.9.2a| | 1 |
| Offside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Lower Obligatory mirror missing |8.1.1| | 1 |
| Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible front mount (5.3.1 (a) (ii)) | 1 |
| Prop shaft joint so worn it is likely to fail 2nd joint (6.1.7 (c) (ii)) | 1 |
| Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition no silencer fitted (8.1.1 (a)) | 1 |
| Exhaust system insecure only one hanger fitted and very loose (6.1.2 (a)) | 1 |
| Nearside Front Drive shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Steering rack not properly attached no locking device (2.1.2 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded divers step area |5.2.6| | 1 |
| Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering close to brake load valve |6.1.A.1| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Fuel system component leaking injector or fuel pipe |7.2.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills corroded through along there lengths |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body floor corroded through in front of rear wheel |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s rear outriggers corroded through behind rear springs |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s rear chassis corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s chassis above rear axle corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmembers in front and behind rear wheels corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front bumper mountings corroded |6.1.B.2| | 1 |
| Offside Front brake disc insecure loose and/or broken at hub assy |3.5.1i| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner sills corroded through along with outriggers behind rear wheels |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s rear body floor sections corroded through where rear inner wheelarches join floor |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front chassis corroded through inside front wheelarch from front to subframe mounting |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front inner wheelarch corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s outer sill corroded through at front |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner wheelarch corroded through behind rear wheel |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner/outer sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted outer sill |2.4.A.3| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded floor |2.2.C.1h| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded floor |2.2.C.1h| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded under wheel arch |2.2.C.1h| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind wheel under arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded corner at side of spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded above spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded above wheel inside arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill insufficent weld |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre sill insufficent weld |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step/ floor / sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill to floor insufficent weld |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` phone holder / sat nav holder |8.3.1b| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Sil Both Side |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded Sil Both |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS CORRODED |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS CORRODED |2.4.A.3| | 1 |
| Nearside Front Ball joint has excessive play INNER RACK JOINT |2.2.B.1f| | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced r/h chassis and r/h body seal very rusty welded (6.1.1 (a) (i)) | 1 |
| Central Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holes in l/h center body seal |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In 2 places on out rigger near front spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Visable from inner wing |chalked| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Visable from inner wing area |6.1.B.2| | 1 |
| Offside Front Brake disc significantly and obviously worn inner sureface (1.1.14 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis too inner rear wing corroded (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step under side |6.1.B.2| | 1 |
| Offside Stop lamp not working inop when side light on |1.2.1b| | 1 |
| Nearside Inner Steering component mounting prescribed area is excessively corroded sill |2.1.2 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and out sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured anchor end broken (5.3.1 (b) (i)) | 1 |
| Outer Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering main chassis frame |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill / floor |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings below brake servo |6.1.B.2| | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users suspect turbo (8.2.2.2 (c)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nsr cross member rotten (6.2.2 (d) (i)) | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded Pump to Pinion pipe excessively corroded |2.3.2| | 1 |
| Prop shaft flexible coupling so deteriorated it is likely to fail centre bearing |6.1.7 |d| |ii|| | 1 |
| Emissions not tested excessive black smoke may cause damage to emissions tester |7.4.B.1| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL |6.2.2 |d| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting point. |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has a modification which adversely affects braking or steering chassis behind front wheel |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering chassis behind front wheel |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind rear wheel |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer and floor to sills and offside |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mounting front (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis rigger leaf spring mount (5.3.6 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis out rigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury inner step (6.2.8 (b)) | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury inner step (6.2.8 (b)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis out rigger (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member engine mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis behind shock absorber (5.3.6 (a) (i)) | 1 |
| Exhaust system insecure rear bracket broken (6.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear of road spring |5.3.6 |a| |i|| | 1 |
| Offside Front Headlamp extinguishes when tapped lightly by hand |1.2.4c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor by rear spring rear mount |2.4.A.3| | 1 |
| Central Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and outer (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury door mirror casing broken (6.2.1 (a) (i)) | 1 |
| Nearside Side repeater incorrect colour lens missing causing light to be white (4.4.3 (a)) | 1 |
| Front Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 1 |
| Rear Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced internal and external sections (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment DANGEROUS!!!!!!!! (2.1.3 (b) (ii)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush split/bush detaching (5.3.4 (a) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt holed (2.1.3 (g) (ii)) | 1 |
| Offside Front Brake disc significantly and obviously worn inner faces |1.1.14 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength mount area |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step/floor |6.1.B.2| | 1 |
| Centre Rear Towbar component excessively corroded near side |6.6.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded tow bar |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch floor pan |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch floor pan |2.4.A.3| | 1 |
| Offside Rear Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner cill panel near spring mount (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced foot plate under side (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced foot step under side (6.1.1 (a) (i)) | 1 |
| Nearside Front Brake disc significantly and obviously worn caliper seized binding rust grooved disc cherry red (1.1.14 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Under Step Area marked in yellow |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger and inner Panel marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and inner panel marked in yellow |2.4.A.3| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step o side |6.1.B.2| | 1 |
| Prop shaft bearing housing likely to fail both |6.1.7 |f| |ii|| | 1 |
| Brake pipe at imminent risk of failure or fracture one of rear brake pipes not clipped up and resting on exhaust manifold |1.1.11 |a|| | 1 |
| Stop lamp not working both n/s and o/s |1.2.1b| | 1 |
| Offside Front Track rod end ball joint has excessive play ingress |2.2.B.1f| | 1 |
| Nearside Front Other passenger door cannot be opened from outside the vehicle Side Loading Door (6.2.3 (a)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body has a sharp edge caused by damage sliding door handle |6.1.C.1| | 1 |
| Rear Position lamp missing BOTH REAR (4.2.1 (a) (ii)) | 1 |
| Rear Stop lamp(s) missing BOTH REAR (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch multiple |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area multiple |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance area multiple |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance area multiple |5.3.6 |a| |i|| | 1 |
| Nearside Rear Mechanical brake component securing device missing |3.5.1i| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member both sides (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear wheel arches near shock mount and rear spring mounts (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both Inner sills (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill improper repair (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail next to fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock tower (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in front of rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mounting area. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front of spring mounting area. |5.3.6 |a| |i|| | 1 |
| Nearside Front Sub-frame severely distorted preventing nearside front lower arm from moving freely. |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/ chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor / chassis |2.4.A.3| | 1 |
| Offside Inner Front Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement Engine mounting cross member corroded offside (6.1.8 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis near foam |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded Various |2.3.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill/inner step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill/inner step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer sill week. |5.2.6| | 1 |
| Central Exhaust has a major leak of exhaust gases first silencer |7.1.2| | 1 |
| Central Exhaust system not adequately supported mount broken |7.1.1| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded chasis rail |2.2.C.1h| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step inn |5.2.6| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering Inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering Outer sull (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that it is likely to adversely affect braking or steering Inner sill (6.1.1 (d) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind rear wheel (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Lower sill separated due to rust |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Lower body sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |6.1.1 |c| |i|| | 1 |
| Brake pump locking device insecure |3.6.A.2d| | 1 |
| Offside Front Anti-lock braking system component excessively damaged ABS ring cracked |3.4.2| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush in lower wishbone |2.4.G.2| | 1 |
| Dropside cannot be secured in the closed position both side of dropside jagged edges |6.4.1| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member on propshaft bearing rusted and holed |6.1.B.2| | 1 |
| Body has a projection caused by corrosion both rear sills on rear cab doors rusted and holed |6.1.C.1| | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel |steering rack fitted| rack end |2.3 |a| |i|| | 1 |
| Parking |secondary brake| on a single line braking system has inadequate effort at a wheel both sides |1.3.1 |a| |i|| | 1 |
| Offside Side repeater not working marker lights |1.4.A.2c| | 1 |
| Nearside Side repeater not working side marker out |1.4.A.2c| | 1 |
| Braking system leaking compensator leaking |3.6.A.1| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings rear outrigger |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to back |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rear |6.1.B.2| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis leg |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill not welded complete |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill not welded complete |6.1.B.2| | 1 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| inner rack end |2.2.A.1b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring hanger |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near engine mount holed |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed gearbox mount |6.1.B.2| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings innere sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Front Macpherson strut has excessive movement in the upper support bearing assembly bothsides |2.5.B.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded n/s chassis floor excessivly corried |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded oa/s chassie excessively corroded |5.2.6| | 1 |
| Centre Rear Seat belt anchorage prescribed area is excessively corroded of cab |5.2.6| | 1 |
| Offside Upper Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Nearside Rear Leaf spring saddle is fractured (5.3.1 (b) (i)) | 1 |
| Body component insecure TIPPER BED (6.2.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured Front spring eye (5.3.1 (b) (i)) | 1 |
| Offside Front Body insecure (6.2.2 (a) (i)) | 1 |
| Nearside Body component insecure tipper (6.2.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Front Outer Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Rear Brake prescribed area is excessively corroded load sensing valve |1.1.21 |e| |i|| | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.1 |c| |ii|| | 1 |
| Fuel cap/sealing device component leaking |6.1.3 |b| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded all rear suspension mount areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor in side arch |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer ringer (6.1.1 (c) (i)) | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour light cluster damaged |1.1.A.3e| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside rear |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings UNDER STEP WITHIN 30 CM OFF SEAT MOUNTING |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill to outrigger |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill to outrigger |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Of rear of cab |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Outer Body panel corroded and likely to cause injury Wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Front Position lamp switch cannot be operated from the normal driving position |1.1.A.1| | 1 |
| Rear Road wheel cracked |4.2.A.1a| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in the inner part of wing |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill x2 holes |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill x1 hole |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door shut |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount/chassis |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded Inner sill/ door step. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing. |2.4.A.3| | 1 |
| Nearside Body panel corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn lower arm rear bush |5.3.4 |a| |i|| | 1 |
| Suspension arm has excessive play in a pin/bush both front
|2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member has hole |2.4.A.3| | 1 |
| Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance cracked |1.4.A.2e| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis above spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength LEAF SPRING REAR MOUNTING POINT PRESCRIBED AREA (5.3.6 (a) (i)) | 1 |
| Nearside Rear Rear fog lamp does not emit a steady red light lens showing white light (4.5.4 (a)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light lens showing white light (4.5.4 (a)) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement inner D bushes x 2 24 |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis area |2.4.A.3| | 1 |
| Nearside Body component damaged and likely to cause injury mirror body |6.2.1 |a| |i|| | 1 |
| Front Prop shaft bearing excessively worn ALSO LOOSE |6.1.7 |b| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side step (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch to inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Entrance/exit door deteriorated and function impaired outside handle broken |6.2.C.1a| | 1 |
| Offside Rear Body insecure and dangerous to other road users tipper body swivel as marked |6.1.B.1b| | 1 |
| Parking brake mechanism/associated mounting prescribed area is fractured at front mount |3.1.9| | 1 |
| Parking brake mechanism/associated mounting prescribed area is inadequately repaired Secondly hand brake mount (1.1.21 (e) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Limit of 1.19 (8.2.2.2 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wing |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Ex box split |6.1.2 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |rearmost point| |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |rear section| |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step and inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step and inner sill |6.1.1 |c| |i|| | 1 |
| Front Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
| Offside Rear Upper Towbar component insecure |6.6.1| | 1 |
| Nearside Rear Brake slack adjuster seized |1.1.18 |a|| | 1 |
| Nearside Front Valve stem seriously damaged Perished (5.2.3 (j)) | 1 |
| Exhaust emissions exceed manufacturers specified limit manufacturers specified limit .75 (8.2.2.2 (a)) | 1 |
| Rear Prop shaft bearing excessively worn Centre bush (6.1.7 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine mounting crossmember mounting point (6.1.1 (c) (i)) | 1 |
| Brake performance not tested Fluid leak (1.2.1 (g)) | 1 |
| Offside Lower Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Offside Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front inner sill corroded |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill/ step |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill/step area |7.1.1 |a| |i|| | 1 |
| Centre Statutory seat belt missing Stalk missing |5.1.1| | 1 |
| Offside Rear Electrical wiring deteriorated and bare wires exposed and tow ball wiring |1.9.2c| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush `D` bushes both |2.4.G.2| | 1 |
| Nearside rear brake recording little or no effort 90 kg |3.7.B.5a| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering centre |6.1.A.1| | 1 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill in several places |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step |5.3.6 |a| |i|| | 1 |
| Nearside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill in several places |5.3.6 |a| |i|| | 1 |
| Nearside Front Steering locking device ineffective Track rod end lock nut lose |2.1.3 |d|| | 1 |
| Offside Front Steering locking device ineffective Track rod end lock nut lose |2.1.3 |d|| | 1 |
| Front Oil leaking continuously from engine posing a serious risk to road safety Vacuum pump leaking |8.4.1 |a| |ii|| | 1 |
| Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear Rear fog lamp emits a light other than red reversing light comes on when fog light switch is operated |1.3.2e| | 1 |
| Stop lamp adversely affected by the operation of another lamp indicators , side light and fog light |1.2.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front spring hanger (lower door sill) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front spring hanger (lower door sill) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (lower door sill) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (lower door sill) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (inner wheel arch area) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (inner wheel arch area) (5.3.6 (a) (i)) | 1 |
| Front Headlamp not working on main beam x 2 |1.7.5a| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Nearside Rear Outer Anti-roll bar linkage has excessive play in a pin/bush TRY NEW BOLT AND NUT 1ST |2.4.G.2| | 1 |
| Headlamp aim beam image obviously incorrect o/s head light bulb in wrong. |1.8.A.1b| | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment Hand brake. |1.1.15 |f|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed and corroded (5.3.6 (a) (i)) | 1 |
| Anti-roll bar missing |2.4.G.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at threeplaces |6.1.B.2| | 1 |
| Power steering pump insecure resivour |2.3.6| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both steps, both sills (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail, 2 areas |6.1.1 |c| |i|| | 1 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected large part missing showing white (4.5.1 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing area (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing area (5.3.6 (a) (ii)) | 1 |
| Front Anti-roll bar pin or bush excessively worn both D bushes (5.3.4 (a) (i)) | 1 |
| Front Anti-roll bar linkage ball joint excessively worn n/s & o/s (5.3.4 (a) (i)) | 1 |
| Front Prop shaft securing bolt loose prop joining bolt loose (6.1.7 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side washer bottle (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area front & rear (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area central (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced short (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced short (4.1.4 (b)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rails in several places (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rails in several places (6.1.1 (c) (i)) | 1 |
| Position lamp adversely affected by the operation of another lamp both headlights come on with side lights (4.2.3 (c)) | 1 |
| Stop lamp(s) not working all (4.3.1 (a) (ii)) | 1 |
| Power steering component insecure and steering adversely affected header tank insecure (2.1.5 (d) (ii)) | 1 |
| Suspension component attachment bracket/mounting corroded and seriously weakened rear cross member on offside x2 (5.3.3 (b) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both under steps (7.1.1 (a) (i)) | 1 |
| Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt both (2.1.3 (g) (ii)) | 1 |
| Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened inner arch insufficient weldind (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch near lower arm mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Passenger`s seat insecure bolt missing n/s front |6.2.A.1| | 1 |
| Brake cable modified and seriously weakened |3.5.1n| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step panel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floorpan |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floorpan |6.1.B.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside sill |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside rear and offside rear |6.2.2 |d| |i|| | 1 |
| Brake pipe likely to become detached or damaged offside front brake pipe |1.1.11 |d| |ii|| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength offside rear leaf spring rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Cab steps so insecure it is likely to cause injury badly corroded (6.2.8 (a) (ii)) | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury badly corroded (6.2.8 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength quarter section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch shock absorber mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Leg Under Bonnet (6.1.1 (c) (i)) | 1 |
| Offside Rear Hand operated control valve damaged |3.2.1a| | 1 |
| Offside Rear Anti-roll bar insecure eye at end |2.4.G.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded b piller/door lock |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/strut mount |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded bulk head |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded bulkhead |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/strut mount |2.4.A.3| | 1 |
| Central Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis member by prop shaft mountain |6.2.2 |d| |i|| | 1 |
| Nearside Front Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Central Front Bonnet primary retaining device excessively deteriorated (3.1 (c)) | 1 |
| Nearside Rear Anti-lock braking system component excessively damaged (1.6 (e)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bushes (5.3.4 (a) (i)) | 1 |
| Body has a sharp edge caused by damage both mirror casings damaged |6.1.C.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint pos pump |2.3.3b| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Step and sill area |7.1.1 |a| |i|| | 1 |
| Emissions not tested 1 Auxiliary drive belt loose and is likely to come off and cause damage. (8.2.2.2 (e)) | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure (6.1.7 (g) (ii)) | 1 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced Inner chassis beam above and to the front of sub frame and road wheel has big damage on outer surface - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced Inner sill and inner wheel arch area - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Offside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced Inner sill and inner wheel arch area - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Offside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced Under body floor pan/inner side of foot step area - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Centre of vehicle towards rear has damage in two places - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Above rear axle - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Behind road wheel area - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Rear chassis near bumper - marked with yellow chalk (6.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member at spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member at spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member at anti roll bar mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member at anti roll bar mounting |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both center cross members are corroded and holed |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top side of chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower side of chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner above sub frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner wing side (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength main chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower bulkhead area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower bulkhead area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (top) (5.3.6 (a) (i)) | 1 |
| Rear rear parking |secondary| brake grabbing severely both sides |3.7.B.6b| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill and door step (6.2.2 (d) (ii)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor body (6.1.1 (c) (i)) | 1 |
| Front Service brake excessively binding both sides (1.2.1 (f)) | 1 |
| Central Front Prop shaft likely to become detached (6.1.7 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/r cab floor |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Both mid inner sills |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/s/r chassis leg/arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded underbonnet |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail |as marked | |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail |as marked| |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded axle mounting |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing and wheel arch |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength on main chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill by leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear leaf spring inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear leaf spring inner sill (5.3.6 (a) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step and outrigger |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s and o/s/f inner and outer sills
n/s and o/s inner steps |5.2.6| | 1 |
| Nearside Rear Inner Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER WING BY GEARBOX MOUNTING (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL IN 3 PLACES (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt boot detached (5.3.4 (b) (ii)) | 1 |
| Fuel pipe insecure not secured correctly along underside (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis and inner wheel arch within 30cm of shock mounting. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis and inner wheel arch within 30cm of shock mounting. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension component pin or bush excessively worn Shock absorber |5.3.4 |a| |i|| | 1 |
| Offside Rear Lower Suspension component pin or bush excessively worn Shock absorber |5.3.4 |a| |i|| | 1 |
| Offside Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring shackle 3 places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out riger and o/s/r out riger |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering rear out riger |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering flour |6.1.A.1| | 1 |
| Bonnet cannot be secured in the closed position bonnet catch missing (3.1 (b) (i)) | 1 |
| Nearside Outer Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Outer Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside chassis at spring eye.|chalk marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside inner sill.|chalk marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside rear crossmember at towing bracket|chalk marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside inner sill area.|chalk marked| |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion Wing area. |6.1.C.1| | 1 |
| Nearside Rear Brake pipe inadequately supported flex pipe |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger corroded and holed at rear spring front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger corroded and holed at rear spring front mounting |2.4.A.3| | 1 |
| Offside Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Nearside Front Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear of lower arm |2.4.G.2| | 1 |
| Exhaust catalytic converter missing where one was fitted as standard has welded panel in side of cat. |7.1.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded in wheel arch, marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill, marked in yellow. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded adjacent to damper upper mounting, marked in yellow. |2.4.A.3| | 1 |
| Front Bumper likely to become detached Front Bumper mountings corroded (6.1.4 (a) (ii)) | 1 |
| Fuel tank insecure front strap deteriorated/tank sitting on front subframe (6.1.3 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Prescribed area inadequately repaired (chalked) (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in-out (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside (chalked) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Inner Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Rear Parking brake lever, pawl mechanism pivot|s| retaining device insecure |3.1.4b| | 1 |
| Offside Rear Parking brake lever, pawl mechanism pivot|s| retaining device insecure |3.1.4b| | 1 |
| Brake lever has insufficient reserve travel hand brake |1.1.2 |a|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounting corroded and holed |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, bump stop area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing to chassis rail |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both chassis holed |2.4.A.3| | 1 |
| Front Bumper insecure both side caps flapping |6.1.4 |a| |i|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sills |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill |6.1.B.2| | 1 |
| Body has a sharp edge caused by damage rear bumper |6.1.C.1| | 1 |
| Centre Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
| Front Steering rack excessively corroded and unserviceable |2.2.C.1d| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired shock |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear shock |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired shock |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired foremost out rigger more than 1 place |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired foremost out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired rear most suspension mount and out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired rear most suspension mount and outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury BUMPER |6.2.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SPRING HANGER |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SPRING HANGER |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced IN FRONT OF FRONT REAR SPRING HANGER |6.1.1 |c| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated INNER WHEEL ARCH |6.2.4 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated INNER WHEEL ARCH |6.2.4 |a| |i|| | 1 |
| Fuel pipe insecure |6.1.3 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both side cross member |2.4.A.3| | 1 |
| Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Seat belt retracting mechanism defective stuck |5.2.5b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded end vallance |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg under fuse box |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg under fuel tank filler |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis by fuel pipes |6.1.A.1| | 1 |
| Offside Front Front wheel bearing has excessive play and noisy |2.5.A.3c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker top mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker top mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired anchor mounting |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in chasis |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holes in sill within 30 cms of load bearing member |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both ends of leaf spring |2.4.A.3| | 1 |
| Brake valve insecurely mounted near side chassis corrosion around compensator |3.6.A.2a| | 1 |
| Front Suspension arm severely distorted |2.4.G.1| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting corroded at body centre |6.6.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded under offside front wheel arch within 30cm of engine mount |6.1.B.2| | 1 |
| Offside Obligatory mirror missing glass missing |8.1.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage light cluster |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front inner sills |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired repair plate corroded (5.3.6 (a) (i)) | 1 |
| Service brake excessively fluctuating both front (1.2.1 (e)) | 1 |
| Nearside Rear Stop lamp has less than 50% of the light sources illuminating is showing dim light |1.2.1b| | 1 |
| Exhaust has a major leak of exhaust gases from second silencer |7.1.2| | 1 |
| Nearside Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outer sill along its length |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill along its length |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP/SILL |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP/SILL |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOORPAN/CROSSMEMBER |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WING
|6.1.B.2| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect bulb in wrong |1.8.A.1b| | 1 |
| Offside Rear Outer Anti-roll bar attachment bracket/mounting nut missing drop link insecure |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill |6.2.2 |d| |i|| | 1 |
| Supplementary Restraint System warning lamp indicates a fault air bag lamp on |5.4.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 1 |
| Nearside Front Front wheel bearing has excessive play nearside bearing/hub |2.5.A.3c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring upper mount |2.4.A.3| | 1 |
| Front Body has a sharp edge caused by corrosion offside/nearside front wings |6.1.C.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill/step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front/rear mounts |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor corroded |7.1.1 |a| |i|| | 1 |
| Headlamp not working on main beam offside and nearside. |1.7.5a| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside inner sill under vehicle below fuel filler pipe. |6.1.1 |c| |i|| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp WHEN INDICATOR ON |1.1.A.3f| | 1 |
| Emissions not tested SMOKE LEVEL (8.2.2.2 (e)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre near fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill /door step (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger/inner wing (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing to floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring |front mount area| |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member by rear leaf springs (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member by rear leaf springs (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength various areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by drop link (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/step |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded various places marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked various places |2.4.A.3| | 1 |
| Nearside Rear rear brake recording little or no effort foot/brake |3.7.B.5a| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid brake drum area wet with fluid |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill end area |2.4.A.3| | 1 |
| Nearside Leaf spring anchor bracket nut missing |2.4.B.6c| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both sides D bushs |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt attached to the hub |5.3.4 |b| |ii|| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement arm bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing / chassis multiple places |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis to outrigger corrosion |5.2.6| | 1 |
| engine mounting bracket insecure and likely to fail engine cross member corroded |6.1.D.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Vallance |5.3.6 |a| |i|| | 1 |
| Upper Hazard warning switch faulty |1.4.B.1d| | 1 |
| Brake cable has restricted free movement parking brake cable is restricted by corrosion on chassis |3.5.1k| | 1 |
| Offside Front Body has a sharp edge caused by damage mirror cover |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring area |2.4.A.3| | 1 |
| Offside Rear Suspension arm fractured |2.4.G.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 1 |
| Front Outline marker lamp not working both roof (4.2.1 (a) (ii)) | 1 |
| Offside Rear Exhaust system not adequately supported support rubber split |7.1.1| | 1 |
| Offside Body component damaged and likely to cause injury door mirror body sharp edges (6.2.1 (a) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury door mirror body sharp edges (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Shackle |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above axle |6.1.1 |c| |i|| | 1 |
| Offside Rear Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Front Fuel tank insecure tank strap |6.1.3 |a| |i|| | 1 |
| Rear Fuel tank insecure tank strap |6.1.3 |a| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount bracket |6.1.1 |c| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced foot step |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor Seat Mount. |5.2.6| | 1 |
| Centre All position lamps not in good working order |function impaired| |1.1.A.2a| | 1 |
| Power steering pipe/hose leaking Pipe to rack (2.1.5 (a)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch to outriger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (spring hanger area) (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (wheel arch ) (6.2.2 (d) (i)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb in wrong way (4.1.2 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill,repair coming off (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6| | 1 |
| Emissions not tested oil leak (8.2.2.2 (e)) | 1 |
| Offside Rear Rear reflector not facing the rear |1.5.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner wing insufficient welding (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Inner wing insufficient welding (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired Outer sill insufficient welding (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired Outer sill insufficient welding (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired Inner step /sill insufficient welding (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired Inner step /sill insufficient welding (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Floor to chassis insufficient welding (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Floor to chassis insufficient welding (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member split (5.3.6 (a) (i)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Offside Front Body panel insecure wing (6.2.1 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger extending to inner and outer sill area (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mounting point (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring mounting point (5.3.6 (a) (ii)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb not fitted correctly (4.1.2 (c)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at towbar mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm attachment bracket damaged and seriously weakened |2.4.G.5| | 1 |
| Offside Obligatory mirror insecure Wing mirror |3.3 |b| |ii|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired not all seam welded |2.4.A.3| | 1 |
| Electrical wiring inadequately supported all at rear |1.9.2a| | 1 |
| Electrical wiring deteriorated and bare wires exposed rear both sides wire exposed |1.9.2c| | 1 |
| Nearside Front Ball joint has excessive play also boot burst |2.2.B.1f| | 1 |
| Rear Body component corroded and likely to cause injury dropside both sides and rear corroded |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill inner and outer to chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill to drivers floor and step |5.2.6| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative Load compensator leaking (brake fluid) (1.1.17 (c) (ii)) | 1 |
| Central Prop shaft bearing excessively worn Donut bush (6.1.7 (b) (i)) | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body panel (inner sils) (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body panel (inner sils) (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper body mounting points (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail *2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail *2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper body mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper body mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both ends inner arch |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper (6.1.1 (c) (i)) | 1 |
| Offside Front Brake hose excessively damaged due to insecure (1.1.12 (b) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step x4 (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step x3 (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Emissions not tested no output from obd or battery (8.2.2.2 (e)) | 1 |
| Front All position lamps not working both marker lamps |1.1.A.3b| | 1 |
| Nearside Inner Front Lower Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer cill |5.3.6 |a| |i|| | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength both front inner wings |5.3.6 |a| |i|| | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength osf chassis leg |5.3.6 |a| |i|| | 1 |
| Body has a sharp edge caused by corrosion N/s and o/s front wings |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings off side front chassis |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Top suspension mount |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Panel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc And offside |2.5.C.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings And offside corroded and holed in 12 places |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings And offside rear inner wheel arches |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside and offside front inner wheel arches |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front top chassis corroded and holed next to engine mounting |6.1.B.2| | 1 |
| Headlamp not working on main beam x2 |1.7.5a| | 1 |
| Prop shaft bearing excessively worn 2nd bearing |6.1.7 |b| |i|| | 1 |
| Exhaust has a major leak of exhaust gases after 2nd centre box |6.1.2 |a|| | 1 |
| Offside Headlamp lens seriously defective headlamp damaged & weathered - no beam pattern |4.1.1 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg marked in yellow |2.4.A.3| | 1 |
| Bonnet retaining device excessively deteriorated wasn`t securing closed |8.4.2| | 1 |
| Nearside Power steering pipe|s| or hose|s| excessively corroded and from rack |2.3.2| | 1 |
| Nearside Front drive shaft coupling flexible rubber or fabric coupling insecure |2.5.C.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel tub |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foor |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of seat belt mount |6.1.B.2| | 1 |
| front brakes release unevenly o/s slow |3.7.B.4| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded underside of chassis leg |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded cab floor/bulkhead |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab floor/bulkhead |5.2.6| | 1 |
| Offside Rear Stop lamp insecure light cluster |1.2.1a| | 1 |
| Offside Rear Braking system leaking drum |3.6.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner + outer sill (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Outline marker lamp not working (3rd row) (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working (3rd row) (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner & Outer Sills Holed &Corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner & Outer Sills Holed &Corroded (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced ( Sill To Box Section ) Holed & Corroded (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre Box Section To Rear Cab Holed & Corroded (6.1.1 (c) (i)) | 1 |
| Nearside Outer Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Steering lock stop loose |2.2.D.2c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor/ step |2.4.A.3| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings front chassis leg |6.1.B.2| | 1 |
| Front Outline marker lamp not working both (4.2.1 (a) (ii)) | 1 |
| Rear Outline marker lamp light intensity significantly reduced both (4.2.3 (a) (ii)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both on axle (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre crossmember |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis inner |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis outer |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded step x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger x2 |2.4.A.3| | 1 |
| Braking system leaking front to rear |3.6.A.1| | 1 |
| Nearside Brake prescribed area is excessively corroded and functionality of the braking system is affected chassis near limit valve |1.1.21 |e| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill and chassis |5.3.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill and step |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill and chassis |5.3.6 |a| |ii|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering 1st cross member |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering 2nd cross member |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering 3rd crossmember |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering 4th cross member |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering 5th cross member |6.1.A.1| | 1 |
| Brake pipe inadequately clipped both front to rear |3.6.B.1| | 1 |
| Central Suspension spring mounting prescribed area is excessively corroded cross memer |2.4.A.3| | 1 |
| Offside Leaf spring anchor bracket damaged and seriously weakened |2.4.B.6d| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill x 2 |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch inner wing area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under bonnet below servo |2.4.A.3| | 1 |
| Front Body component insecure Front bumper (6.2.1 (a) (i)) | 1 |
| Nearside Rear Position lamp not working Upper sidelight (4.2.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working Over cab (4.2.1 (a) (ii)) | 1 |
| Body mounting fixings insecure such that stability is seriously impaired Ns and os body mountings corroded marked with chalk (6.2.2 (c) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing area marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step area marked with chalk (6.2.2 (d) (i)) | 1 |
| Outline marker lamp does not illuminate simultaneously with the position lamps All outline markers ns and os (4.2.2 (a)) | 1 |
| Central Drive shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing top |5.3.6 |a| |i|| | 1 |
| Nearside Front drive shaft coupling flexible rubber or fabric coupling unit severely cracked |2.5.C.1d| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings can been seen under bonnet and has been marked |6.1.B.2| | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded (3.3.A.2) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3) | 1 |
| Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under wing flitch panel (5.3.6 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and under sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 1 |
| Centre Front Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth |3.1.5| | 1 |
| Front Lower Horn not working |1.6.2a| | 1 |
| Centre Rear Lower Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 1 |
| Offside Front Upper Supplementary Restraint System warning lamp indicates a fault instrument cluster |5.4.2| | 1 |
| Direction indicator flashing more than 120 times a minute all |1.4.A.2g| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill foot step area |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center outer sill |6.1.B.2| | 1 |
| Nearside Front Lower Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Front Lower Torque/reaction arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Lower Torque/reaction arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outline marker lamp missing x2 (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill under n/s rear door (6.2.2 (d) (i)) | 1 |
| Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
| Power steering component leaking rack / pipes |2.1.5 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded chassis centre. near fuel tank and passenger seat mounting |5.2.6| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear mount |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis nd rea quater (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis and quater (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch too floor (5.3.6 (a) (i)) | 1 |
| Floor excessively deteriorated large holes of deteriation in body floor |6.2.4 |a| |i|| | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Centre Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp when indicator applied |1.1.A.3f| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn BOTTOM BALL JOINT |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn BOTTOM BALL JOINT |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING HANGER AREA 2 PLACES |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING HANGER AREA |5.3.6 |a| |i|| | 1 |
| Offside Rear fog lamp not working and lense broken |1.3.2b| | 1 |
| Offside Front Lower Brake cable insecure |3.5.1d| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step area corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by front shocker (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced by step (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced @rear shocker 2nd axle (6.1.1 (c) (i)) | 1 |
| Nearside Rear Tailgate component insecure skid runner bracket broken (6.2.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced @2nd axle shocker bracket (6.1.1 (c) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect water in headlight (4.1.2 (c)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) | 1 |
| Nearside Front Leaf spring cracked |2.4.B.1a| | 1 |
| Swivelling towbar swivel pin missing (6.6.5a) | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Front front brakes release unevenly (3.7.B.4) | 1 |
| Nearside Ball joint has excessive play inner TR |2.2.B.1f| | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Brake disc in such a condition that it is seriously weakened both front (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail wheel arch area (6.1.1 (c) (i)) | 1 |
| Rear Service brake lagging in operation nearside (1.2.1 (d)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear outriggers |6.1.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp poor earth |1.1.A.3f| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp poor earth |1.2.1f| | 1 |
| Nearside Rear Stop lamp(s) likely to become detached Light unit damage (4.3.1 (c) (ii)) | 1 |
| Rear Electrical wiring for braking components extremely deteriorated (4.11 (b) (iii)) | 1 |
| Rear Stop lamp(s) not working bothside (4.3.1 (a) (ii)) | 1 |
| Position lamp not working all around x4 (4.2.1 (a) (ii)) | 1 |
| Central Rear reflector likely to become detached Bothside (4.8.1 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above axle |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above axle |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2 parts inner arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 parts inner arch areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Leaf Spring Front Mount (Cross Member) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Leaf Spring Front Mount (Cross Member) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis 9behind drivers wheel |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-lock braking system component excessively damaged ABS ring (1.6 (e)) | 1 |
| Offside Front Upper Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Windscreen wiper blade deteriorated |6.1.2| | 1 |
| Offside Outer Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear Bush |2.4.G.2| | 1 |
| Towbar component insecure electrical socket insecure |6.6.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength perforated, inside wheel arch |5.3.6 |a| |i|| | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement **crossmember corroded** (6.1.8 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (Inner & Outer) (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear out rigger/side body area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under/inner wing area (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced os step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back of sill/side body area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back of sill/side body area |2.4.A.3| | 1 |
| Nearside Rear Brake lever reduced in thickness more than 1/3rd by chaffing |3.5.1a| | 1 |
| Offside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Headlamp not working on main beam both |4.1.1 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected top of chassis rail |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both spring hangers |5.3.6 |a| |ii|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear under sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer + inner sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength rear seat anchorage point rear cab |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded seat anchorage rear cab |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step /seat mounts |5.2.6| | 1 |
| Offside Front Headlamp light source and lamp not compatible Led fitted (4.1.4 (c)) | 1 |
| Offside Battery insecure and likely to cause a short circuit Under seat (4.13 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing strut area (5.3.6 (a) (i)) | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure Rear strap corroded off (6.1.3 (a) (i)) | 1 |
| Offside Front Lower Suspension arm locating pin insecure rear bolt loose |2.4.G.3a| | 1 |
| Offside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wheel arch glued |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg corroded at tank |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger at front spring eye corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger at front spring eye corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch corroded |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch corrroded |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis spring mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area [front of spring] |5.3.6 |a| |i|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all areas marked with chalk to be welded |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside sill |5.2.6| | 1 |
| Offside Front Outer Drive shaft joint excessively worn (6.1.7 (c) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed front and rear (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing support panel holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing support panel holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing support panel holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of leaf spring |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis beam |5.2.6| | 1 |
| Offside Front Seat belt flexible stalk damaged (7.1.2 (b) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at fuel tank holed and corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Leaf spring fractured fractured at eye bolt loop (5.3.1 (b) (i)) | 1 |
| Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values plate limit 1.19 first attempt was 5.43 |8.2.2.2 |f|| | 1 |
| Nearside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Sub-frame damaged and seriously weakened |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush. |2.4.G.2| | 1 |
| Fuel tank insecure Tank strap broken front only thing holding fuel tank on is front subframe and rear tank strap |7.2.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill - as chalked. |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill - as chalked. |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill - as chalked. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill - as chalked. |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch - as chalked. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring fractured eyelet - as chalked. |5.3.1 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor above axle (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded and n/s inner and outer steps |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer step |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearmost spring mount |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting valance (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x2 (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step, inner and outer (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step, inner (6.2.2 (d) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded NS + OS outer sills / Rear inner chassis rails above axle |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step / sill |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) | 1 |
| Bonnet retaining device ineffective bonnet can not be opened to check componants |8.4.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded chassis leg |3.3.A.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill x two areas |5.2.6| | 1 |
| Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed |6.2.2 |d| |i|| | 1 |
| Fuel pipe union leaking below fuel pump. (6.1.3 (b) (i)) | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction wipers |3.1 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch X2 areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section around front of spring mount
multiple areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around rear of spring mount
multiple areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg near step |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg near step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded and functionality of the braking system is affected chassis around brake compensator
multiple areas |1.1.21 |e| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch X2 areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas around rear of spring mount |5.3.6 |a| |i|| | 1 |
| Front Sound deadening material likely to become detached |8.1.1 |b| |ii|| | 1 |
| Nearside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected FADED |4.3.1 |b| |ii|| | 1 |
| Nearside Rear Stop lamp|s| switch with a delay in operation CROSS-FUNCTIONING |4.3.2 |a| |ii|| | 1 |
| Offside Rear Stop lamp|s| switch with a delay in operation CROSS-FUNCTIONING |4.3.2 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER FLITCH PANEL CORRODED/HOLED |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings near arch sill as marked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings near arch sill as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near arch sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near arch sill |6.1.B.2| | 1 |
| Front Brake disc significantly and obviously worn both (1.1.14 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail around leaf spring |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount area, very rear (5.3.6 (a) (i)) | 1 |
| Front Service brake lagging in operation offside lazy (1.2.1 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting. (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring front mount point |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring rear mount point |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring rear mount point |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength anchor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength anchor |5.3.6 |a| |i|| | 1 |
| Offside Front Tie bar/rod ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at |2.4.A.3| | 1 |
| Windscreen in such a condition that visibility through swept area is seriously affected Dashboard full of items (3.2 (c) (ii)) | 1 |
| Nearside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at valance |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at valance |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength cill |5.3.6 |a| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under/outer sill |6.1.B.2| | 1 |
| Nearside Rear Direction indicator incorrect colour lens broken |4.4.3 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of rear spring area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of step area under side |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill x1 |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering of chassis viewable from underside |6.1.A.1| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner step sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner step sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing and inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill and outer sill |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded door step area |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded cassis badly rusted |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis badly rusted |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step and sill back |5.2.6| | 1 |
| Nearside Front Window excessively tinted and visibility of an obligatory external mirror seriously affected side window and quarter window heavily tinted (3.2 (b) (ii)) | 1 |
| Offside Front Window excessively tinted and visibility of an obligatory external mirror seriously affected side window and quarter window heavily tinted (3.2 (b) (ii)) | 1 |
| Nearside Rear Inner Body component likely to become detached side steps cable tied on to chassis (6.2.1 (a) (ii)) | 1 |
| Offside Rear Inner Body component likely to become detached side steps cable tied on to chassis (6.2.1 (a) (ii)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above rear axle corroded and holed marked with yellow crayon (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above rear axle corroded and holed marked with yellow crayon (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded hole marked with yellow crayon (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill and step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch edge of floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch edge of floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near compensator |2.4.A.3| | 1 |
| Offside Front Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Front passenger door cannot be opened from inside the vehicle or outside (6.2.3 (a)) | 1 |
| Power steering ram leaking rack (2.1.5 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear corners on both sides (5.3.6 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis under subframe |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in multiple places behind rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in multiple places behind rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near shock absorber |2.4.A.3| | 1 |
| Offside Direction indicator lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
| Offside Rear Rear fog lamp emits a light other than red lens broke |1.3.2e| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear box section |2.4.A.3| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Axle insecure 1 U bolt missing |5.1.1 |b| |i|| | 1 |
| Offside Rear Axle insecure 1 U bolt missing |5.1.1 |b| |i|| | 1 |
| Prop shaft bearing excessively worn 1st |6.1.7 |b| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn bolt loose |5.3.4 |a| |i|| | 1 |
| Offside Drag link end loose |2.2.B.1d| | 1 |
| Nearside Drag link end loose |2.2.B.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under Sill |6.1.1 |c| |i|| | 1 |
| Offside Brake cable has restricted free movement |1.1.15 |e|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill to step |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shocker absorber |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor hole corrosion |7.1.1 |a| |i|| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outersill |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion outer sill in various places |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion inner sill in various places |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing under arch |6.1.B.2| | 1 |
| Offside Front Body component corroded and likely to cause injury wing holed (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury wheel arch edge (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassey leg corroded (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring anchor both before and after spring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring anchoring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassey corroded in various places within 30cm of anchring point and brake clips (6.2.2 (d) (i)) | 1 |
| Central Front Power steering pipe/hose excessively corroded metal power steering pipe corroded (2.1.5 (g) (i)) | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached rear rose bush (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension arm pin or bush likely to become detached rear rose bush (5.3.4 (a) (ii)) | 1 |
| Nearside Floor excessively deteriorated step corroded (6.2.4 (a) (i)) | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve area corroded |3.3.A.2| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp stop light |1.1.A.3f| | 1 |
| Fuel tank insecure securing bracket snapped |7.2.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |marked area| |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |marked area| |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |marked area| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |marked area| |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |marked area| |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (chalked area) (5.3.6 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (chalked area) (6.1.1 (c) (i)) | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmeber |6.6.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassie leg |5.2.6| | 1 |
| Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect bulb insecure (4.1.2 (c)) | 1 |
| Nearside Front Upper Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Exhaust system not adequately supported exhaust clamps and tail pipe missing. |7.1.1| | 1 |
| Offside Front Inner Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Rear Lower Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Upper Brake cable has restricted free movement |3.5.1k| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near rear bumper |2.4.A.3| | 1 |
| Nearside Cab steps in such a condition that it is likely to cause injury inner sill corroded (6.2.8 (b)) | 1 |
| Offside Cab steps in such a condition that it is likely to cause injury inner sill corroded (6.2.8 (b)) | 1 |
| Emissions not tested no water/very low on engine oil/engine chuffing (8.2.2.2 (e)) | 1 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom |2.4.G.2| | 1 |
| Offside Inner Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Offside Rear Lower Leaf spring eye defective |shackle| |2.4.B.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg to body. (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement droplink |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement droplink |2.4.G.2| | 1 |
| Obligatory mirror missing blind spot fitted but inadequate view |8.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in engine bay, marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/ outer sill |6.1.B.2| | 1 |
| Offside Rear Braking system leaking back plate / wheel leaking brake fluid |3.6.A.1| | 1 |
| Front Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 1 |
| Nearside Front Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill corroded marked yellow |6.1.B.2| | 1 |
| Rear Direction indicator incorrect colour BOTH |1.4.A.2f| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of front arch marked yellow |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch corroded marked yellow in two places |6.1.B.2| | 1 |
| Prop shaft flexible coupling excessively deteriorated Both couplings (6.1.7 (d) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner jacking point plus outer sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CILL |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NEAR TANK |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded CILL |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded engine bay chassis top |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mounting front inner/outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount front inner seal (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount rear inner/outer panel (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis rail by shocker |2.4.A.3| | 1 |
| Rear Lower Towbar excessively corroded within 30cm of towbar mounting x member |6.1.6 |i| |i|| | 1 |
| Nearside Inner Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Central Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near suspension leg |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill |6.1.B.2| | 1 |
| Exhaust system not adequately supported front exhaust bracket |7.1.1| | 1 |
| Front suspension has excessive play in a lower suspension ball joint both front
|2.5.B.1a| | 1 |
| Brake pedal anti-slip provision worn smooth and clutch |1.1.2 |c|| | 1 |
| Offside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Nearside Front Macpherson strut insecurely attached lower bolt not locked |5.3.3 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill by leaf spring front shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, rear panel and out rigger by leaf spring rear shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear panel by leaf spring rear shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by bump stop on chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view driver door |8.1.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of sill near leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill holed o/s/r (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release missing |5.2.5a| | 1 |
| Front Inner Subframe mounting prescribed area is excessively corroded o/s and n/s wing |2.4.A.3| | 1 |
| Front Driver`s airbag obviously defective airbag light on |5.4.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed and corroded |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush droplink |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush droplink |2.4.G.2| | 1 |
| Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc cv boot |2.5.C.1a| | 1 |
| Exhaust has a major leak of exhaust gases centre exhaust silencer blowing corroded |7.1.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rig near leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear chassis leg within prescribed area of suspension mount , adjacent leaf spring bump stop |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear chassis leg within prescribed area of suspension mount , adjacent leaf spring bump stop |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front chassis leg, within wheel well, within prescribed area |5.3.6 |a| |i|| | 1 |
| Oil leaking excessively from engine Turbo outlet pipe not connected, blowing oil |8.4.1 |a| |i|| | 1 |
| Exhaust emissions likely to be affected by an induction leak Turbo outlet pipe not connected |8.2.2.1 |b|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking and braking performance affected Wheel cylinder leaking |1.1.16 |b| |ii|| | 1 |
| Nearside Front Brake prescribed area is inadequately repaired Nearside front inner wing area, inside wheel well |1.1.21 |e| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Offside sill to floor panel and hole in outer sill panel |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Door step area, inside front. |7.1.1 |a| |i|| | 1 |
| Emissions not tested Not tested due to non-attached turbo outlet pipe |8.2.2.2 |e|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded middle x3 |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded middle mount |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion driver foot step |6.1.C.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near shock absorber mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill |6.2.2 |d| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill areas marked |6.1.1 |c| |i|| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn D bushes both sides (5.3.4 (a) (i)) | 1 |
| Rear fog lamp not working o/s |1.3.2b| | 1 |
| Headlamp aim aimed so that it dazzles other road users n/s |1.8.A.1a| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r outter sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s door step mounting area holed and distorted |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp All lights flashing |1.1.A.3f| | 1 |
| Offside Rear Position lamp showing white light to the rear Lens damaged |4.2.3 |a| |ii|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp All lights flashing when indicator is switched on |4.2.3 |c|| | 1 |
| Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings near axle bump stop |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of osf engine mounting inside inner wing |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill below door |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of leaf mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded of leaf mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under cab |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under cab |6.1.B.2| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x 1 |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x 2 |6.1.1 |c| |i|| | 1 |
| Front suspension retaining device missing |2.5.A.4| | 1 |
| Rear Exhaust has a major leak of exhaust gases 3 places |7.1.2| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp stop lamp on |1.1.A.3f| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis leg |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/leg |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s of rear cross member |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded under o/s front wing |2.4.A.3| | 1 |
| Anti-lock braking system obviously removed (1.6 (f)) | 1 |
| Nearside Steering linkage ball joint has excessive play inner rod (2.1.3 (b) (i)) | 1 |
| Offside Front Hydraulic brake cylinder damaged and function impaired |3.6.A.2c| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front & rear shackle mountings (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear shackle mount (5.3.6 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Suspension component likely to become detached both rear bump stops |5.3.3 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill areas |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill as marked |6.1.B.2| | 1 |
| Nearside Upper Leaf spring shackle pin retaining device insecurely fitted |2.4.B.3b| | 1 |
| brake disc cracked |3.5.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| front brake binding Both |3.7.B.1| | 1 |
| Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Steering rack fractured and unserviceable |2.2.C.1d| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp with indicator on (4.2.3 (c)) | 1 |
| Rear Stop lamp(s) not working with indicators (4.3.1 (a) (ii)) | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both side (4.4.3 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer chassis leg |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer chassis leg |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor holed within 30cm of suspension mounting point (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor within 30cm of suspension mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced entrance step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill, rear quarter chassis leg and floor pan to wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill, rear quarter chassis leg and floor pan to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2 holes |2.4.A.3| | 1 |
| Offside Brake cable has wires broken and is significantly weakened cable snapped |3.5.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded LEAF SPRING FRONT INNER WHEEL ARCH TO SILLS |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded SILLS |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing in two places |2.4.A.3| | 1 |
| Nearside Rear Lower Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Front Lower Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Rear Lower Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Front Lower Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward of axle by spring eye mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount area corroded and holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger shocker top mounting |2.4.A.3| | 1 |
| Nearside Front Ball joint has excessive play track rod end |2.2.B.1f| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch/floorpan |2.4.A.3| | 1 |
| Lower Windscreen in an unacceptable condition crack in excess of 100mm. (3.2 (c) (i)) | 1 |
| Rear Wheel bearing has excessive play both sides (5.1.3 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x 2 places |2.4.A.3| | 1 |
| Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Underside of drivers step corroded away at the seam weld (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4panel |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 |5.3.6 |a| |i|| | 1 |
| Centre Bonded suspension unit attachment loose |2.4.F.1a| | 1 |
| Nearside Rear Shock absorbers insecurely attached lower mounting bolt not fully tightened (5.3.2 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring forward mounting area (5.3.6 (a) (i)) | 1 |
| Ball joint has excessive play floor coller as excessive play in ball joint |2.2.B.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis[ brake compensator] |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill, inner section to rear and wheel arch |2.4.A.3| | 1 |
| Offside Body component damaged and likely to cause injury mirror unit housing. (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury sliding door handle. (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring mount, chassis. (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected 2 areas (5.3.6 (a) (ii)) | 1 |
| Emissions not tested excess smoke (8.2.2.2 (e)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step to sill |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch top and lower inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock asborber mount (5.3.6 (a) (i)) | 1 |
| Offside Front Brake prescribed area is excessively corroded inside wheel arch (1.1.21 (e) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30cm of spring mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30 cm of sub frame mount (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30cm engine mounting support (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leaf spring mounting and out rigger within 30cm of leaf spring mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/body exhaust mount attached (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/box section arear (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/wheel arch arear (5.3.6 (a) (i)) | 1 |
| Offside Front Position lamp light intensity significantly reduced Flickering |4.2.3 |a| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Rear facing suspension arm bush detached |5.3.4 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced in sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced in sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of rear spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre of spring |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under brake servo (5.3.6 (a) (i)) | 1 |
| Offside Front Leaf spring fractured eye broken (5.3.1 (b) (i)) | 1 |
| Track rod end ball joint has excessive play both front outer excess play (2.1.3 (b) (i)) | 1 |
| Front Brake valve leaking Load Sensing valve (1.1.7 (d) (i)) | 1 |
| Central Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom of arch |6.1.B.2| | 1 |
| Centre Body has a sharp edge caused by corrosion exhaust outer casing |6.1.C.1| | 1 |
| Bonnet cannot be secured in the closed position or open but opened on prechecks |8.4.1| | 1 |
| Upper Fuel system component leaking engine/ injector area |7.2.3| | 1 |
| Nearside Front Inner Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Brake lever has insufficient reserve travel Parking brake |1.1.2 |a|| | 1 |
| Fuel tank insecure Front securing strap exessively corroded. |6.1.3 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear spring rear mounts |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis underbonnet (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded inner sill and outer sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded inner wheel arch and inner sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded inner wheel arch. |2.4.A.3| | 1 |
| Fuel system component leaking excessively or a risk of fire fuel leaking from rear of injector pump. |6.1.3 |b| |ii|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing excessively corroded. |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing excessively corroded. |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill excessively corroded. |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill holed |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings close to shock absorber mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings close to shock absorber mount |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded O/s under sill step |5.2.6| | 1 |
| Nearside Rear Vehicle structure has a modification which adversely affects braking or steering Behind rd wheel |6.1.A.1| | 1 |
| Brake valve insecurely mounted Chassis corroeded |3.6.A.2a| | 1 |
| Brake valve leaking load sensing (1.1.7 (d) (i)) | 1 |
| Nearside Rear Brake lining(s) contaminated brake fluid (1.1.13 (b)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner ach at spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength spring mount x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger holed (6.2.2 (d) (i)) | 1 |
| Towbar with an unsafe modification to secondary components bolt missing from bracket to chassis (6.1.6 (g) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front most leaf spring mount area |2.4.A.3| | 1 |
| Nearside Front Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner/chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner/chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre Sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill nr front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel nr front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member nr front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch nr spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Body has a sharp edge caused by damage door mirror casing |6.1.C.1| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Front Other passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Bonnet retaining device excessively deteriorated lock not working |8.4.2| | 1 |
| Offside Front Outer Body has a projection caused by corrosion WING |6.1.C.1| | 1 |
| Nearside Front Outer Body has a projection caused by corrosion WING |6.1.C.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH FLOOR |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOOR TO WHEEL ARCH |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WING BY DOOR STEP |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch behind Shocker (5.3.6 (a) (i)) | 1 |
| Hazard warning switch faulty not working os |1.4.B.1d| | 1 |
| Power steering pipe/hose excessively damaged |2.1.5 |g| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected round shackle mounting point. |5.3.6 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded CHASSIS ROUND BRAKE LOAD VALVE |3.3.A.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill and outer |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underbody sill to seat mounting point |6.1.B.2| | 1 |
| Nearside Rear Brake pipe excessively damaged along axle |3.6.B.2c| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear panel |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills |6.1.1 |c| |i|| | 1 |
| Headlamp not working on dipped beam BOTH (4.1.1 (a) (ii)) | 1 |
| Front position lamp|s| has less than 50% of the light sources illuminating BOTH FRONT |1.1.A.3b| | 1 |
| Seat belt insecurely fixed to the seat MIDDLE ANCHOR MISSING |5.2.1a| | 1 |
| Fuel tank insecure STRAP BROKEN |7.2.1| | 1 |
| Exhaust has a major leak of exhaust gases AT MAIN BOX |7.1.2| | 1 |
| Steering retaining device insecure PIPES INSECURE |2.2.C.1g| | 1 |
| Suspension spring mounting prescribed area is excessively corroded NEARSIDE AND OFFSIDE REAR X MEMBERS AT SPRING HANGERS |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded AT INNER ROAD WHEEL |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded AT INNER ROAD WHEEL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AT SPRING ANCHOR |2.4.A.3| | 1 |
| Nearside Outer Front Lower Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstop and inner sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sil at sill end |2.4.A.3| | 1 |
| Centre Rear Brake pipe excessively chafed |3.6.B.2c| | 1 |
| Other passenger door cannot be opened from outside the vehicle Rear doors (6.2.3 (a)) | 1 |
| Other passenger door cannot be opened from outside the vehicle Side door (6.2.3 (a)) | 1 |
| Fuel pipe leaking injectors |6.1.3 |b| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near shock mount |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring mount |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near engine mount |6.1.1 |c| |i|| | 1 |
| Prop shaft bearing housing insecure rear (6.1.7 (f) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced behind wheel (6.1.1 (a) (i)) | 1 |
| Offside Rear Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill next to front spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded drop sill next to front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded drop sill and inner sill next to front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill next to front spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger next to rear mount |2.4.A.3| | 1 |
| Offside Front Bonded suspension unit attachment cracked |2.4.F.1b| | 1 |
| All position lamps adversely affected by the operation of another lamp both front and rear affected by brake lights |1.1.A.3f| | 1 |
| Offside Front Outer Anti-roll bar linkage pin or bush excessively worn lower |5.3.4 |a| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill
central |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced n/s/f dip |1.7.5a| | 1 |
| Headlamp not working on main beam n/s/f |1.7.5a| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 3.24 |7.4.B.3b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r rear spring mount 2x patches |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r |front | spring mount area 2x patches |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal metal pipes into rack leaking badly |2.3.3b| | 1 |
| Steering rack gaiter split n/s/f gaiter split/leaking |2.2.D.2d| | 1 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt n/s/f bototom b/joint cover split |2.4.G.2| | 1 |
| Front wheel bearing rough when rotated n/s/f |2.5.A.2| | 1 |
| Offside Front Brake hose excessively damaged cuts in hose |3.6.B.4d| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in chassis rail by fuel tank (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in chassis rail (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting foot step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring hanger to inner sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring hanger to inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner arch and floor |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner arch |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 5.61 |7.4.B.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r |rear leaf spring| mount area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/ center |leaf spring front mount area |2.4.A.3| | 1 |
| Leaf spring has excessive wear in a shackle pin and/or bush n/s/r leaf spring shackle bush |2.4.B.2| | 1 |
| Brake load sensing valve linkage obviously incorrectly adjusted rear linkage all loose |3.6.E.3| | 1 |
| Track rod end ball joint has excessive play o/s/f track rod ball joint |2.2.B.1f| | 1 |
| Direction indicator adversely affected by the operation of another lamp n/s/r indicator stops working and stoplamp flashes when fog light applied |1.4.A.2h| | 1 |
| Direction indicator not working n/s/r indicator not working/stop lamp flashes instead |1.4.A.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by spring anchor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis rail where load sensing valve mounts |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by spring shackle |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort LOW EFFORT |3.7.B.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassy leg |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of cill |6.1.B.2| | 1 |
| Centre Outer Suspension component mounting prescribed area is excessively corroded off side |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength outer sill front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill front spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis upper shock absorber mount. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis brake load compensation valve |5.3.6 |a| |i|| | 1 |
| Nearside Body component corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outher sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor / chassis area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor / chassis area |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement r/bush |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount area |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner cill area |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength rear mount
|2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded behind strut |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner arch |2.4.A.3| | 1 |
| Offside Front Torsion bar fractured |2.4.E.1a| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering within 30 cm of shock absorber |6.1.A.1| | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at side door |6.2.2 |d| |i|| | 1 |
| Shock absorbers has a serious fluid leak both rear |5.3.2 |b|| | 1 |
| Emissions not tested due to oil leak |7.4.B.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill at front (7.1.1 (a) (i)) | 1 |
| Headlamp aim not tested Due to dipped beam not working (4.1.2 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Rear silencer (6.1.2 (a)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill in the middle (6.1.1 (c) (i)) | 1 |
| Offside Rear All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill within 30cm of leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded bump stop within 30cm of shock absorber |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear wheel arch |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is inadequately repaired all rear |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired all front |5.3.6 |a| |i|| | 1 |
| Brake prescribed area is fractured and functionality of the braking system is affected load valve mounting |1.1.21 |e| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wheel arch area |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal door step (6.1.1 (c) (i)) | 1 |
| Oil leaking excessively from engine vac pump (8.4.1 (a) (i)) | 1 |
| Nearside Steering component mounting prescribed area is excessively corroded sill |2.1.2 |e| |i|| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded sill |2.1.2 |e| |i|| | 1 |
| Nearside Front Inner Steering component mounting prescribed area is excessively corroded wheel house |2.1.2 |e| |i|| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded wheel house |2.1.2 |e| |i|| | 1 |
| Nearside Rear Inner Steering component mounting prescribed area is excessively corroded arch |2.1.2 |e| |i|| | 1 |
| Offside Rear Inner Steering component mounting prescribed area is excessively corroded arch |2.1.2 |e| |i|| | 1 |
| Offside Rear Steering component mounting prescribed area is excessively corroded crossmember |2.1.2 |e| |i|| | 1 |
| Loading door likely to open inadvertently or not remain closed in the case of a sliding door handle broken |6.2.3 |b| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded mid chassis |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded mid chassis |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis (5.3.6 (a) (ii)) | 1 |
| Offside Outer Front Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Outer Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Nearside Outer Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing by shock mounting |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp bulb fitted incorrectly |1.1.A.3f| | 1 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement ``D`` bush |2.4.G.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near rear shocker mount (6.1.1 (c) (i)) | 1 |
| Prop shaft bearing excessively worn front support (6.1.7 (b) (i)) | 1 |
| Prop shaft bearing excessively worn rear support (6.1.7 (b) (i)) | 1 |
| Offside Inner Rear Upper Electrical wiring inadequately supported |1.9.2a| | 1 |
| Centre Rear Lower Electrical wiring damaged and bare wires exposed |1.9.2c| | 1 |
| Rear Brake load sensing valve seized but ABS functioning rear compensator seized |1.1.17 |c| |i|| | 1 |
| Emissions not tested due to excess smoke |8.2.2.2 |e|| | 1 |
| Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings Engine cross member. |6.1.B.2| | 1 |
| Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement both front suspension arms |2.4.G.2| | 1 |
| Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement rear diff bush |2.4.B.2| | 1 |
| Body has an unsafe modification nearside side door padlock assembly (6.2.1 (d) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill within 30cm of seat fixing (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearmost inner panel within 30cm of nearside rear spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/floor join @ shock top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch/floor seam @ shock top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring front hanger - inner/outer sills (5.3.6 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn X 2 (6.1.7 (b) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury wing corroded and jagged |6.2.1 |a| |i|| | 1 |
| Offside Rear Leaf spring with an unsafe modification Leaf spring |5.3.1 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner door step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside & offside rear outer sills |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Out Rigger (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/Arch (6.1.1 (c) (i)) | 1 |
| Offside Lower Power steering pipe|s| or hose|s| leaking to rack |chalked |2.3.3b| | 1 |
| Offside Lower Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded leaf spring anchor area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded leaf spring anchor area |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded shackle mount area |2.4.A.3| | 1 |
| Nearside Front Suspension arm synthetic bush deteriorated resulting in excessive movement inner rear |2.4.G.2| | 1 |
| rear brake recording little or no effort n/s o/s |3.7.B.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength close to rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most leaf spring mounting area in 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting cross member area (6.1.6 (i) (i)) | 1 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting cross member area (6.1.6 (i) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded multiple areas |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR LEAF SPRING |6.1.B.2| | 1 |
| Steering rack gaiter missing or no longer prevents the ingress of dirt Both |2.1.3 |g| |ii|| | 1 |
| Rear Outer Suspension spring mounting prescribed area is excessively corroded Both |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shocker mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shocker mount area |2.4.A.3| | 1 |
| Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting AND OFF SIDE SIDE OUTER SILL (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL AND POOR REPAIR OFF SIDE (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body has a sharp edge caused by damage bumper |6.1.C.1| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid leaking from drum (1.1.16 (b) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail by fuel tank |6.1.B.2| | 1 |
| Bonnet cannot be secured in the closed position cannot be opened or closed (3.1 (b) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis by step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger by front leaf spring hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 1/4 panel by rear leaf spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 1/4 panel by rear leaf spring mount (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x member by tow bar (6.2.2 (d) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill
in front of wheel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill
in front of wheel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill
near body mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis above axle |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis above axle |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings body mount behind axle |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings body mount behind axle |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near strut mount |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint lower ball joint |2.4.G.2| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded panel x4 |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded panel x3 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of hanger |2.4.A.3| | 1 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment hanging off |2.1.3 |b| |ii|| | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill end |6.1.1 |c| |i|| | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side member |6.1.1 |c| |i|| | 1 |
| Offside Rear Upper Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill central |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded drivers door step |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded step and floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - outer face |5.3.6 |a| |i|| | 1 |
| Outer Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ADJ TO BUMP STOP |6.1.B.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear bush bolt loose |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail shock absorber prescribed area |2.4.A.3| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting cross member |6.6.6| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger and leaf spring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger and leaf spring (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting shock turit (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting shock turit (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger[front] |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger[rear] |2.4.A.3| | 1 |
| Centre Front Lower Brake pipe leaking |3.6.A.1| | 1 |
| Central Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis next to laden valve mounting |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body sill |6.1.B.2| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp Both sides |4.2.3 |c|| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp Both sides |4.4.3 |b|| | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp Both sides |4.5.4 |b|| | 1 |
| Rear Stop lamp|s| adversely affected by the operation of another lamp Both sides |4.3.3 |b|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body seal |6.1.B.2| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear chassis by |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan shocker |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing under bonnet |2.4.A.3| | 1 |
| Nearside Front Obligatory mirror missing wing mirror upper glass |3.3 |a|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various |6.1.B.2| | 1 |
| Front suspension has excessive play in a lower suspension ball joint x2 |2.5.B.1a| | 1 |
| Nearside Front Sub-frame cracked |2.4.G.1| | 1 |
| Rear Upper Suspension spring mounting prescribed area is severely distorted rear both sides |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arches |6.1.C.1| | 1 |
| Front coil spring broken both sides |2.4.C.1a| | 1 |
| Front Inner Seat belt anchorage prescribed area is excessively corroded both sides sill |5.2.6| | 1 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve area |3.3.A.2| | 1 |
| Central Seat belt locking mechanism does not secure or release buckle stalk missing |5.2.5a| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb incorrectly fitted |1.8.A.1b| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering 2nd & last transverse crossmembers |6.1.A.1| | 1 |
| Offside Front Sub-frame attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Front Suspension arm has excessive play in a ball joint both sides |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i|| | 1 |
| Bonnet primary retaining device excessively deteriorated will not open (3.1 (c)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension mount |6.1.1 |c| |i|| | 1 |
| Fuel tank insecure one strap snapped |6.1.3 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring Anchor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 3x Areas |2.4.A.3| | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release cleaned & now working ok |5.2.5a| | 1 |
| Exhaust has a major leak of exhaust gases back box and rear pipe missing |6.1.2 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front hanger |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Direction indicator not working when side light is on |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Upper Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ closing panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ closing panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened spring mounting area corroded within 30 cm |2.4.B.6d| | 1 |
| Nearside Front Inner Body has a sharp edge caused by corrosion step |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases box missing |7.1.2| | 1 |
| Offside Rear Brake pipe inadequately clipped axle |3.6.B.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded ...Chalked... |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail and inner arch |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Both outer sills |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and inner arch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel and inner sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis bump stop area |2.4.A.3| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis area by engine mounting |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Under Sill |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hangar |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearward outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearward outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 areas by rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End of chassis rail behind rear bumper (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End of chassis rail behind rear bumper (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and by spring eye rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill and body bearer rear |2.4.A.3| | 1 |
| Nearside Direction indicator has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear outriggers x 2 |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear lower inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength out rigger |2.4.A.3| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded sill in 3 places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded sill / door step |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Trailer electrical socket damaged so that lead cannot be securely connected and electrics not tested |1.9.3b| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Top chassis arm in engine bay, prescribed area of suspension component corroded |6.1.1 |c| |i|| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt offside lower front |2.4.G.2| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt n/s lower |2.4.G.2| | 1 |
| Stop lamp adversely affected by the operation of another lamp n/s stop lamp |1.2.1f| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch x3 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis brake compensator |6.1.B.2| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Box Section near Rear Spring Hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Nearside Front Passenger`s seat insecure seat belt connected to seat |6.2.A.1| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp on with side light |1.2.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out6 rigger to sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer rigger to sill |2.4.A.3| | 1 |
| Front Body insecure and dangerous to other road users bumper hanging off |6.1.B.1b| | 1 |
| Steering component is not secure to the vehicle structure colum |2.2.B.1a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill all way along |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front and rear inner sills |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner outrigger door step |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner outrigger at sill back |2.4.A.3| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member |6.1.B.2| | 1 |
| Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis support beam |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to bulkhead |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured chassis leg |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis out riggers |6.1.B.2| | 1 |
| Nearside Rear Axle has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings /offside floor |6.1.B.2| | 1 |
| Offside Rear Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 1 |
| Offside Front Brake hose connection leaking on a hydraulic braking system At flexi hose (1.1.12 (c) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rearward mount back panel holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rearward |2.4.G.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chasis |6.1.B.2| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp stop light (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill wheel arch (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s wheel arches (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, cross member and chassi (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength silll,cross member and chassi (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill and step sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill and step sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasse leg |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasse leg |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded central chassis by vent |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of springhanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind spring hanger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near spring hanger (6.1.1 (c) (ii)) | 1 |
| Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement wishbone |2.4.G.2| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system front to rear engine bay area (1.1.11 (b) (ii)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear near side |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced floor (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced floor (6.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired by front spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired engine mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cills |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cills |6.1.1 |c| |i|| | 1 |
| Nearside Front Floor excessively deteriorated step aera |6.2.4 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated step aera |6.2.4 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both out riggers |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 1 |
| Rear position lamp|s| not working BOTH REARS |1.1.A.3b| | 1 |
| Offside Leaf spring eye defective |anchor| broken |2.4.B.1b| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded leg |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill repairs |2.4.A.3| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill collapsed |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis at front spring eye |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis at rear spring eye |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis inside wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded At rear spring eye |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill as marked |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis @ front spring eye |2.4.A.3| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting X3 |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Inner sill area and outer sill area |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner and outer sills |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside inner and outer sills |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg/engine mounting area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear leaf spring mounts (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear leaf spring mounts (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, above leaf spring mount, |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill at front |5.2.6| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near gearbox mount |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near engine mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axel x3 |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch near top mount |6.1.B.2| | 1 |
| Central Rear Vehicle structure is fractured and structural rigidity is significantly reduced crossmember |6.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail and inner wing |6.1.1 |c| |i|| | 1 |
| Offside Rear Leaf spring fractured Anchor eye |5.3.1 |b| |i|| | 1 |
| Front Electrical wiring insecure near clutch padal |1.9.2a| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded inner sill near front and rear spring eye mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by damage and bumper insecre |6.1.C.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering asd marked |6.1.A.1| | 1 |
| Parking brake lever ratchet not holding correctly (1.1.6 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x-member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x-memper |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed corroded |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Road wheel badly damaged |4.2.A.1a| | 1 |
| Brake performance not tested oil leak |3.7.A.1| | 1 |
| Emissions not tested oil leak |7.4.B.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step/floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded body/wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded body/wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut/inner wing |2.4.A.3| | 1 |
| Offside Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheelarch |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting innersill |6.2.2 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area both front and rear (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area both front and rear (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced central floor section of seat (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch corroded next to rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting area on floor and just above chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch within rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch next to spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mounting area in inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner body |6.1.B.2| | 1 |
| Nearside Rear fog lamp emits a light other than red Lens damaged |1.3.2e| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch strut top mount |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced side step |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded closure panel |2.4.A.3| | 1 |
| Rear Brake prescribed area is excessively corroded load mount (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount of rear spring (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount of rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount of rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve |3.3.A.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under floor |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hannger |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected iunner sill |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 1 |
| Central Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill ns |5.3.6 |a| |ii|| | 1 |
| Central Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill os |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner step |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer wing area (6.1.1 (c) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked |6.1.B.2| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings VALANCE |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH OUTER SILLS |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER STEP/WHEELARCH |6.1.B.2| | 1 |
| Offside Rear position lamp|s| incorrect colour lense cracked |1.1.A.3e| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of leg |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side of leg |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of leg |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side of leg |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer and inner sill holed |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured spring hanger .forward damage |2.4.A.3| | 1 |
| Offside Front Driver`s seat insecure subframe rivet broken |6.2.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut top |2.4.A.3| | 1 |
| Inner Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp when using indicator (4.2.3 (c)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside of vehicle, inner sill (6.2.2 (d) (i)) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis/outrigger, inner quarter panel and rear cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis/outrigger, inner quarter panel and rear cross member |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded top strut mount inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger at front of rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger at rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis corrosion behind wheel |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake load valve attachment point. |6.1.A.1| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp WITH SIDELIGHT |1.4.A.2h| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL RUSTY AND HOLED |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL RUSTY AND HOLED |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL RUSTY AND HOLED |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL RUSTY AND HOLED |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER BACK PANEL RUSTY AND HOLED |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER WHEEL ARCH |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL AND CHASSIS RUST AND HOLED |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chasiss front of rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chasiss rear of rear spring hanger |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Front Headlamp not working on main beam o/s& n/s |1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded dropsill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded drop sill next to rear spring front mount |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill x2 |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill x2 |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail x2 |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step well |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail x2 |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded underbody/door step |5.2.6| | 1 |
| Offside Headlamp aim beam image obviously incorrect headlamp bulb damaged |1.8.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear most bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear most bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete |6.1.B.2| | 1 |
| Offside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill in two places |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted inner wheel arch to floor |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear outer sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2 x holes within 30cm of leaf spring |front| mount |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion to inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion to inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg above bump stop |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corrosion to out rigger adjacent to rear leaf spring fixing |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corrosion to out rigger adjacent to rear leaf spring fixing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corrosion to rear panel adjacent to rear leaf spring fixing |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering engine mount area |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cil under door step |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre inner sill and outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is severely distorted sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer and inner sill |5.2.6| | 1 |
| Exhaust system not adequately supported centre broken |7.1.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door sill two places where marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Nearside Front Ball joint has excessive play trackrod |2.2.B.1f| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both o/s and n/s spring hangers |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under seat wholed |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills n/s and o/s |6.1.B.2| | 1 |
| Offside Front Seat belt retracting mechanism defective drivers seat |5.2.5b| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member beside parking cable mount |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt also heavily coated in under seal |2.4.G.2| | 1 |
| Electronic parking brake warning indicates a malfunction |1.1.6 |e|| | 1 |
| Offside Front Body component corroded and likely to cause injury Wing badly deteriorated |6.2.1 |a| |i|| | 1 |
| Nearside Front Macpherson strut mounting corroded and seriously weakened Inner wing holed within 30cm of mounting |5.3.3 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis area is holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced chassis is bulging |6.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer body is holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength area in front of rear spring front mounting is holed |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door step area is hold |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near rear brake hoses. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch, near strut top mounting point. |6.1.B.2| | 1 |
| Nearside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring swing shackle |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill mount to floor pan |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger/inner sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring hanger/inner sill area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner door step area |5.2.6| | 1 |
| Body insecure and dangerous to other road users rear step plate |6.1.B.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount / wheelarch |2.4.A.3| | 1 |
| Centre Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn front bush |5.3.4 |a| |i|| | 1 |
| Centre Stop lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Statutory seat belt missing |5.1.A.1| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded and outer sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded need shock |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill corroded |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded x two areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch holed and corroded within shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing holed and corroded within engine mounting |6.1.A.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner arches |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch area, chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, chalked (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced footstep excessively corroded, chalked (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/floor pan within shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis within shock mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch/body |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step/sill |6.1.B.2| | 1 |
| Nearside Rear Braking system leaking from brake drum |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross Member (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body panel |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body panel |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured Spring eye. (5.3.1 (b) (ii)) | 1 |
| Power steering component leaking steering rack pinion area |2.1.5 |a|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/ chassis rail |6.1.1 |c| |i|| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp hazards / indicator |1.1.A.3f| | 1 |
| Power steering component|s| leaking Steering rack leaking from both ends |2.3.3b| | 1 |
| Offside Rear Leaf spring fractured Anchor end eye broken |2.4.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top mount |2.4.A.3| | 1 |
| Nearside Rear Brake lever has restricted free movement |3.5.1k| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill/chassis area |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill area |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill/chassis area |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing area |5.3.6 |a| |ii|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/sliding door area |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by bump stop between spring mounts |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by bump stop between spring mounts |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Axle swivel joint has excessive play in a ball joint |2.5.A.3b| | 1 |
| Nearside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength Beside Gearbox (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch, lower (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Hydraulic brake calliper inadequately mounted |1.1.16 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet. |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step area plus inner and outer sill areas (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step area plus inner and outer sill areas (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas plus box section by shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rail top and side. |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rail top and side. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings By spring mounts |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings By spring mounts. |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anker |2.4.A.3| | 1 |
| Nearside Inner Rear Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Crossmembr |2.4.A.3| | 1 |
| Fuel pipe leaking Fuel filler neck pipe |7.2.3| | 1 |
| Brake valve locking device insecure DUE TO CORROSION AT CHASSIS |3.6.A.2d| | 1 |
| Front Anti-roll bar linkage insecurely attached both |5.3.3 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength front mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced at engine mounting |6.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at gearbox mounting |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember on floor at exhaust rear mounting |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsr osr chassy cills wheel arch all marked up |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis top in engine compartment |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded lower of sill/arch undersill |2.4.A.3| | 1 |
| Offside Rear Lower Leaf spring shackle pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Passenger`s airbag missing |5.4.1| | 1 |
| Nearside Rear Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis within 30cm |5.3.6 |a| |ii|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Offside Front Upper Bumper likely to become detached mounting rotted away |6.1.4 |a| |ii|| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis to sill including sill all within 30cm |6.1.1 |c| |ii|| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering chaiss to sill inc sill |6.1.1 |c| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded lower box section |2.4.A.3| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp affected by indicators / rear fog |1.2.1f| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f shock mountain |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f shock mountain |2.4.A.3| | 1 |
| engine mounting bracket insecure and likely to fail o/s/f chassis leg rotten |6.1.D.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/ inner sill front to rear multiple holes |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/ inner sill front to rear multiple holes |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s front and rear shackle leaf spring mountain to chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s front and rear shackle leaf spring mountain to chassis |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s/r inner chassis leg brake compesator |6.1.A.1| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings n/s/r AND o/s/r cross chassis leg left to right |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r inner wheel arch |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner wheel arch |6.1.B.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings both left an right wheel archs |filler foam| |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/f inner foot step to drivers seat |5.2.6| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings n/s/ outer sill front to rear |6.1.B.2| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings o/s outer sill front to rear |6.1.B.2| | 1 |
| Central Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Emissions not tested exhaust blowing |7.4.B.1| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded most rear inner sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded most rear inner sill |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp flashes with indicator |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi at back off wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi at back off wheel |2.4.A.3| | 1 |
| Nearside Front Sub-frame ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg marked with yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury wing has sharp edge (6.2.1 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury wing has sharp edge (6.2.1 (a) (i)) | 1 |
| Nearside Front Body has an unsafe modification |6.2.1 |d| |i|| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush wishbone |rear| bush. |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush wishbone |rear| bush. |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded 30 cm of top shock mount |2.4.A.3| | 1 |
| Rear Outer Suspension component mounting prescribed area is excessively corroded both chassis legs |2.4.A.3| | 1 |
| Front Anti-roll bar pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect bulb in wrong |4.1.2 |c|| | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL (6.2.2 (d) (i)) | 1 |
| Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting CHASSIS RAIL (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting INNER WHEEL ARCH/CHASSIS (6.2.2 (d) (i)) | 1 |
| Nearside Outer Front brake disc excessively scored |3.5.1h| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 10 mountings. 4 good 6 excessively corroded |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step /sill (5.3.6 (a) (i)) | 1 |
| Exhaust system insecure and blowing (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sll (5.3.6 (a) (i)) | 1 |
| Offside Front Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step under body (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing under wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring cracked front mounting |2.4.B.1a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie leg |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch x2 |2.4.A.3| | 1 |
| Brake hose inappropriately repaired o/s/f insecure |3.6.A.3| | 1 |
| Braking system leaking LSV leaking |3.6.A.1| | 1 |
| front brakes release unevenly n/s slow to release |3.7.B.4| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings FRONT INNER WING |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 1 |
| Body has excessive displacement which may lead to loss of vehicle control all under bonnet items |6.1.B.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shocker |2.4.A.3| | 1 |
| Rear Brake valve has an excessive discharge of oil brake load valve leaking |3.6.E.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sil |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sil |6.1.B.2| | 1 |
| Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Xmember |6.1.B.2| | 1 |
| Nearside Front Sub-frame severely distorted Fouling subframe |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring front mounting |outrigger/sill| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring rear mounting |inner sill| |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases part missing |7.1.2| | 1 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 1 |
| Offside Windscreen wiper control missing |8.2.1a| | 1 |
| Central Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/doorstep |5.2.6| | 1 |
| Nearside Rear Lower Electrical wiring damaged, likely to become detached |1.9.2b| | 1 |
| Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Emissions not tested due to exhaust leak |8.2.2.2 |e|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both rear out riggers near rear spring moutings |5.3.6 |a| |ii|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both rear end of sills near rear spring mountings |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis near rear spring mouting |5.3.6 |a| |ii|| | 1 |
| Suspension arm pin or bush excessively worn both front lower suspension arms rear bushs |5.3.4 |a| |i|| | 1 |
| Offside Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached cross member |6.1.6 |i| |ii|| | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks tow bar wiring |4.11 |c| |iii|| | 1 |
| Front Service brake excessively fluctuating Both sides (1.2.1 (e)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter seal (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter seal (7.1.1 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn center bearing (6.1.7 (b) (i)) | 1 |
| Exhaust system insecure held with wire [poorly] (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Position lamp lens seriously defective |4.2.1 |b|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner plus outer sill |5.2.6| | 1 |
| Offside Rear Upper passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Outline marker lamp not working roof |4.2.1 |a|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to sub frame mounting point |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top chassic leg in engine bay |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic around subframe mount |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases down pipe to centre section joint |7.1.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near rear spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near rear spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near front spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill marked in yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring/ chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring/ chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour lense is brocken (4.4.3 (a)) | 1 |
| Nearside Rear Outer Seat belt missing (7.1.2 (a)) | 1 |
| Offside Rear Outer Seat belt missing (7.1.2 (a)) | 1 |
| Offside Front Brake pipe excessively damaged to flexible hose (1.1.11 (c)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg panel (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear wheel arch |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis nr engine mounts |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nr engine mount |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch under engine mounts |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch under engine mounts |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch area |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded as marked in three areas on rear chassis. |2.4.A.3| | 1 |
| Nearside Front Upper Front position lamp|s| does not face the front |1.1.A.3a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of seat |6.1.B.2| | 1 |
| Central Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis crossmember excessively corroded [handbrake cable mounting] (6.1.1 (c) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rotten away (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill rotten away (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom balljoint |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear of both leaf springs chassis box sections corroded and rear panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch top (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x2 |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step and metal nearby |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step and metal nearby |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Rear box section all corrosion chalked |2.4.A.3| | 1 |
| Nearside Rear Stop lamp not working Also interaction with indicator |1.2.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis out riger |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill section |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear quarter and inner rear section |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush bottom ball joint |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer and inner sill
|6.1.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded load valve mount corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Shock absorber mount corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Shock mount corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded holed near front spring mount |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg holed under side near sub-frame mount |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis holed shock top mount |2.4.A.3| | 1 |
| Nearside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front right of spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear right of spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear left of spring mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step to floor |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of front wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle inner and outer |6.1.B.2| | 1 |
| Electrical wiring for braking components extremely deteriorated bare wire under bonnet |4.11 |b| |iii|| | 1 |
| Headlamp aim beam image obviously incorrect both sides |1.8.A.1b| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| All position lamps adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
| Fuel system component leaking filter area dripping down |7.2.3| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Fuel system component leaking pump (6.1.3 (b) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Front brake disc contaminated by grease |3.5.1h| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper bar |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step floor |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step floor |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch above chassi leg |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross bar |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner and outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides front floor |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides rear floor |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides front inner wheel arches |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides front chassis |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner chassis area above leaf spring - chalked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Sill - chalked |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step and inner sill-As per marked |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step and inner sill-As per marked |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer Sill-As per makred |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner sill and rear suspension mounting bracket support panelling |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Wheel Arch-As per marked |2.4.A.3| | 1 |
| Nearside Outer Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Front Body panel corroded and likely to cause injury bumper (6.2.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both sides inner wing |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both inner wings |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected valance |5.3.6 |a| |ii|| | 1 |
| Nearside Front Radius arm has excessive play in a pin/bush Rear bush |2.4.G.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Above bump- stop |6.1.B.2| | 1 |
| Rear Stop lamp(s) not working x 2 (4.3.1 (a) (ii)) | 1 |
| Front Front position lamp|s| not working x 2 |1.1.A.3b| | 1 |
| Offside Front Inner Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mounting |outer sill| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mounting |inner sill| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Top shock absorber mount |chassis rail is corroded / split above bump stop| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Top shock absorber mount |chassis rail corroded / split above bump stop| |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind cab (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch x2 patches (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt likely to become detached in the event of a collision lower bracket corroded (7.1.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn +dust cover split (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger next to antiroll bar mounting |2.4.A.3| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded out rigger above propshaft centre bearing |3.1.9| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner drop sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer drop sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mounting prescribed area | inner wing| |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush drop link mounting nut loose |2.4.G.2| | 1 |
| Offside Headlamp extinguishes when tapped lightly by hand |1.2.4c| | 1 |
| Offside Front Sub-frame attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill back |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg,under servo |6.1.A.1| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill x3 |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill x 4 |6.1.A.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch/floor x2 |2.4.A.3| | 1 |
| Brake pipe inadequately clipped Front to rear x2 |3.6.B.1| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill and floor area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both front sills and chassis n/s along fuel tank |5.2.6| | 1 |
| Brake lever has insufficient reserve travel hand brake (1.1.2 (a)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount |5.3.6 |a| |i|| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement x2 |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Under door step |5.2.6| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footstep |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear near brake load vavle |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear floor near wheel arch |6.1.B.2| | 1 |
| Rear Towbar component fractured |6.6.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed in places (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill back (6.1.1 (c) (i)) | 1 |
| passenger door does not latch securely closed sliding door |6.2.B.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill and damaged |5.2.6| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded crossmember |3.3.A.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded 2/parts |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill 2x places |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Both sills/sills to floor |5.2.6| | 1 |
| Nearside Rear Body has a projection caused by corrosion Wheel Arch |6.1.C.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wing |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Side repeater insecure |1.4.A.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer out riggers. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear floor to wheel boxes. |5.3.6 |a| |i|| | 1 |
| Steering column universal joint insecure |2.1.4| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill box section holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired very rear |2.4.A.3| | 1 |
| Nearside Rear Direction indicator not working when all lights switched on |1.4.A.2c| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower arm |2.4.G.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower arm |2.4.G.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush lower arm rear bush |2.4.G.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |near seat mount| |6.1.B.2| | 1 |
| passenger door cannot be opened from outside the vehicle rear exit door |6.2.B.1c| | 1 |
| Front Position lamp not working Both |4.2.1 |a|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cab Inner and outer sill |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cab Inner sill |6.1.1 |c| |i|| | 1 |
| Prop shaft bearing housing likely to fail centre mount/bearing |6.1.7 |f| |ii|| | 1 |
| Electrical wiring heavily deteriorated trailer socket (4.11 (b) (ii)) | 1 |
| Offside Upper Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Brake pipe inadequately supported engine bay |3.6.B.1| | 1 |
| Offside Front Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock mount |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported Rubber Mount Broken |7.1.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases Tail Pipe Broken |7.1.2| | 1 |
| Rear Outline marker lamp not working both sides |4.2.1 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength light board |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded turrort |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion buck step |6.1.C.1| | 1 |
| Rear Prop shaft likely to become detached U/J about to part (6.1.7 (a) (ii)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill outrigger and inner floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill out rigger,floor and inner arch |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner chassis member |6.1.B.2| | 1 |
| Offside Outer Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear fog lamp obviously incorrectly positioned |4.5.4 |a|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both D bushes |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Rear Leaf spring cracked broken at front eye bush |2.4.B.1a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above rear axle inside and outside of chassis rail |6.1.A.1| | 1 |
| Rear Prop shaft bearing excessively worn rear center bearing |6.1.7 |b| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides rear inner wheel arches |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front of rear spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear of rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front of rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear of rear spring mount (5.3.6 (a) (i)) | 1 |
| Direction indicator insecure |1.4.A.2b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and floor (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner arch (5.3.6 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion off side front wing |6.1.C.1| | 1 |
| Offside Front Seat belt retracting mechanism defective drivers |5.2.5b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/floor joint |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/floor joint |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out riggers/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outriggers/chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under vehicle,floor/step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under vehicle step/floor |5.2.6| | 1 |
| Centre Steering column shaft retaining device insecure |2.1.6| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Leaf spring fractured front bush |2.4.B.1a| | 1 |
| Front Suspension arm rubber mounting deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing - bumper |6.1.C.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill & outer sill |2.4.A.3| | 1 |
| Offside Front Brake hose excessively damaged Cut/ Damaged .. (1.1.12 (b) (ii)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil front seat belt |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil |5.3.6 |a| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner/outer (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner/outer (6.1.1 (c) (i)) | 1 |
| Drive shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill corroded around seat belt buckle mount |5.2.6| | 1 |
| Nearside Front Lower Front position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Front Lower Front position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner arch x2 |2.4.A.3| | 1 |
| Central Horn not working |1.6.2a| | 1 |
| Rear Position lamp not working both sides |4.2.1 |a|| | 1 |
| Offside Front Leaf spring eye defective |shackle| |2.4.B.1b| | 1 |
| Nearside Front Outer Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area |6.1.1 |c| |i|| | 1 |
| Power steering component leaking around steering rack/pipes |2.1.5 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas and inner wheel arch/floor areas **Before rear wheel** |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas and inner wheel arch/floor areas **Before rear wheel** |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis/outrigger/floor areas **after rear wheel** |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis/outrigger/floor areas **after rear wheel** |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury TIPPER SUPPORT BAR |6.2.1 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced seat mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced b pillar inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back of the cab where it meets the chassis (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back of the cab where it meets the chassis (6.1.1 (c) (i)) | 1 |
| Rear reflector missing both |1.5.1a| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill /step |6.1.B.2| | 1 |
| Offside Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch at multiple points |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion Sill |6.1.C.1| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Wheel Arch |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion Wheel Arch |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassia |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting Panel |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Boot floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underbody inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength underbody inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan near inner arch (5.3.6 (a) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is inadequately repaired |3.6.C.3| | 1 |
| Headlamp not in good working order affecting the beam image |1.2.4a| | 1 |
| Nearside Front Upper Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner+outer sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner+outer sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near rear spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near rear spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor under arch seam |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg upper face @ servo |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both outer sills as chalked |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner sills as chalked |2.4.A.3| | 1 |
| Nearside Front Driving control|s| clutch pedal anti-slip provision worn smooth. |6.8.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel near spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab floor above chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner/outer sills front |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member at spare wheel nearside and offside |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside next to shock absorber mountings |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded spring, both sides |2.4.A.3| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch missing |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH OUTER SILLS CORRODED AND HOLED. (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases CENTRE BOX (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mountings front and rear (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both rear spring front mountings by outer sill/chassis (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides above bumpstop (6.1.1 (c) (i)) | 1 |
| Emissions not tested oil light on when hot (8.2.2.2 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced and inner sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle bush mount |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear outer sill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mount |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step / sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing two places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired foor |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis / inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/inner wing (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner /outer sills (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner /outer sills (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out riggers (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to wheel arch (6.2.2 (d) (i)) | 1 |
| Rear Shock absorbers has a serious fluid leak shockers both sides (5.3.2 (b)) | 1 |
| Brake cable has restricted free movement handbrake no reverse travel (1.1.15 (e)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering at front (6.1.1 (c) (ii)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides outer sills (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front chassis section excessively corroded (5.3.6 (a) (i)) | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Power steering pipe|s| or hose|s| excessively corroded on to rack |2.3.2| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded full sill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded full sill |2.4.A.3| | 1 |
| Fuel tank insecure about to fall down |7.2.1| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area several places |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x3 holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x3 holes |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underside |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail top at bulkhead |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both rear chassis rail sides above axle |2.4.A.3| | 1 |
| Centre Front Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer + inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis @ fuel tak |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch @ turret |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner arch
|2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor @ seat mounting |5.2.6| | 1 |
| Offside Rear Position lamp light intensity significantly reduced Stop/Tail wrong way round (4.2.3 (a) (ii)) | 1 |
| Stop lamp|s| adversely affected by the operation of another lamp Both rear stop/tail bulbs wrong way round |4.3.3 |b|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear corner and outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch area |5.3.6 |a| |i|| | 1 |
| Front Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill/step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section front and rear of spring mounts |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded chassis and step |5.2.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sills/door steps |7.1.1 |a| |i|| | 1 |
| Body component corroded and likely to cause injury both rear wheel arches |6.2.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired jacking point (6.2.2 (d) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quater |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired WHEEL ARCH TO FLOOR PAN NOT A CONTINUOSE WELD |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is inadequately repaired SILL REPAIR PANEL NOT WELDED/ATACHED ALONG THE ENTIRE TOP EDGE. |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement INNER REAR BUSH |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement INNER REAR BUSH. |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded INNER DOOR STEP PANEL. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded REAR SPRING HANGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR SPRING HANGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CILL/FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CILL/WHEEL ARCH |2.4.A.3| | 1 |
| Centre Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Inner Front suspension has excessive movement at a wishbone pin or bush Wishbone rear bush bonding failed. |2.5.A.1c| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached Bolt loose. |5.3.4 |a| |ii|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Brake valve leaking load sensor |1.1.7 |d| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer seal |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner front wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer sill end |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded bay |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded bay |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp Both rears |1.1.A.3f| | 1 |
| Front position lamp|s| not working Both front |1.1.A.3b| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded Chassis corroded at load valve mount |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring hanger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded N/S body sill |2.4.A.3| | 1 |
| Brake pipe inadequately clipped across bulk head, pipes fouling engine |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/f chassis , along side of fuel tank |5.2.6| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS RAIL |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNR WHEEL ARCH |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r chassis |2.4.A.3| | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis rail 3 parts +underbonnet (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring out rigger (5.3.6 (a) (i)) | 1 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc outer joint |2.5.C.1a| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc outer joint |2.5.C.1a| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step area |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near exhaust hanger |2.4.A.3| | 1 |
| Headlamp not working on main beam front offside |1.7.5a| | 1 |
| Front position lamp|s| not working front nearside |1.1.A.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear nearside |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front nearside |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside centre |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear offside |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside centre |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front |6.1.B.2| | 1 |
| Tie bar/rod has excessive play in a ball joint front offside |2.4.G.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner + Outer Sills |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner + Outer Sill |6.1.B.2| | 1 |
| Rear Lower Engine mounting bracket fractured (6.1.8 (a) (ii)) | 1 |
| Oil leaking excessively from engine oil pressure switch (8.4.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Back section |2.4.A.3| | 1 |
| Nearside Rear Direction indicator incorrect colour showing a white light to the rear |1.4.A.2f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill and outrigger by spring anchor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and cross member by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and under sill by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill outrigger and under sill by spring anchor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis above axle by shock absorber |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured chassis above axle |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel by spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near anti roll |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced whithin 30 cm rear suspension |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced whithin 30 cm rear suspesion |6.1.1 |c| |i|| | 1 |
| Central Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above fuel tank |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis near subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 1 |
| Offside Front Front position lamp|s| not working headlight |1.1.A.3b| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings near nsf wishbone rear bolt repair |6.1.B.2| | 1 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement front wishbone rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter Panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter Panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross Member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CrossMember (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis / Under Sill /Inner Wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step Sill / Inner Wing (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step Sill / Inner Wing (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Braking system leaking under bonnet |3.6.A.1| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| corroded |2.4.B.1b| | 1 |
| Offside Front Leaf spring eye defective |anchor| Front eye |2.4.B.1b| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Step Sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Under Sill |2.4.A.3| | 1 |
| Bonnet retaining device excessively deteriorated Unable to Open |8.4.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill areas marked yellow |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill areas marked yellow |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheelarch |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/inner wing |5.3.6 |a| |i|| | 1 |
| Fuel hose leaking by injectors (6.1.3 (b) (i)) | 1 |
| Nearside Front Lower Bonded suspension unit deteriorated and cannot function as intended rear bush |2.4.F.3| | 1 |
| Offside Front Lower Bonded suspension unit deteriorated and cannot function as intended rear bush |2.4.F.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both side centre inner sills (5.3.6 (a) (i)) | 1 |
| Prop shaft joint excessively worn both centre prop shaft bearings (6.1.7 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x4 |2.4.A.3| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded and leaking |2.3.2| | 1 |
| Offside Rear Stop lamp|s| not working and position light |4.3.1 |a| |ii|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside and offside rear |5.3.6 |a| |i|| | 1 |
| Power steering pipe/hose excessively corroded to/from steering rack (2.1.5 (g) (i)) | 1 |
| Nearside Rear Oil leaking continuously from transmission posing a serious risk to road safety Axle. (8.4.1 (a) (ii)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill in 2 places (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to chassis (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind cab and centre of cross member (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/ shock mounting (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch and around shock mount in 3 places (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor between seat mounting (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in multiple places (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings engine mounting area |6.1.B.2| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength forward mounting inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis close to front sub frame nearside rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch,marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail,marked in yellow|inner wheel arch area| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch,2 places,marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill,marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill,marked in yellow |2.4.A.3| | 1 |
| Nearside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced upper seat mount |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in two places |6.1.1 |c| |i|| | 1 |
| Central Exhaust has a major leak of exhaust gases centre and tail pipe |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength spring hanger and outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded Chassis Rail |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner Wing & Chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outrigger At Spring Hanger |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired Chassis Not Welded Across Top |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Suspension Mounting Excessivley Rusted |2.4.A.3| | 1 |
| Nearside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Central Brake pipe likely to become detached or damaged both (1.1.11 (d) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis various (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hanger area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hanger area (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area complete (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill complete (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected to eqaliser (1.1.21 (e) (ii)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust system insecure back box mounting (6.1.2 (a)) | 1 |
| Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
| Offside Rear An item not tested (Manual) | 1 |
| Offside Rear Body has a sharp edge caused by damage bumper area (6.1.C.1) | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing area (6.1.C.1) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill area (5.2.6) | 1 |
| Offside Rear Leaf spring eye defective (anchor) (2.4.B.1b) | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
| Rear Electrical wiring insecure (1.9.2a) | 1 |
| Fuel system component leaking filter housing
(7.2.3) | 1 |
| Fuel tank insecure (7.2.1) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded under body sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded under body sill |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under body sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under body sill |5.2.6| | 1 |
| Offside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Body has a sharp edge caused by corrosion Seal |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion Seal |6.1.C.1| | 1 |
| Nearside Front Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Nearside Inner Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Inner Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Upper Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis...seen under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis crossmember. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch panel (5.3.6 (a) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill Area |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front+ rear |5.3.6 |a| |i|| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill Areas |6.1.B.2| | 1 |
| Front wheel bearing has excessive play o/s/f |2.5.A.3c| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light hole in lens (4.5.4 (a)) | 1 |
| Fuel tank insecure tank strap broken and 1 corroded (6.1.3 (a) (i)) | 1 |
| Fuel system component leaking injector |7.2.3| | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced inner wing |2.4.G.1| | 1 |
| Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage corner section of bumper missing |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded upper and lower |2.4.A.3| | 1 |
| Rear Lower Suspension spring mounting prescribed area is excessively corroded both side |2.4.A.3| | 1 |
| Offside Front Lower Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Rear Lower Vehicle structure is fractured and structural rigidity is significantly reduced out rigger to rear inner sill |6.1.1 |a| |i|| | 1 |
| Offside passenger door cannot be opened from outside the vehicle slide door |6.2.B.1c| | 1 |
| Offside passenger door cannot be opened from outside the vehicle outside |6.2.B.1c| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded offside sill |5.2.6| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in front of sub frame marked in yellow (6.1.1 (c) (i)) | 1 |
| Centre Front Upper Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Rear Upper Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp reverse light on all the time with rear position lights (4.2.3 (c)) | 1 |
| Central Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 1 |
| Offside Front Inner Floor excessively deteriorated step (6.2.4 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within wheel arch section two places (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure inadequately repaired such that structural rigidity is significantly reduced within wheel arch section (6.1.1 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill centre section and inner wheel arch section (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill centre and rear sections (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering shocker mount |6.1.A.1| | 1 |
| Nearside Bonded suspension unit deteriorated and cannot function as intended rear bump stop missing |2.4.F.3| | 1 |
| Offside Rear Bonded suspension unit deteriorated and cannot function as intended bump stop missing |2.4.F.3| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chalked |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chalked |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner wheel arch |6.2.2 |d| |i|| | 1 |
| Front position lamp|s| not working n/s+o/s front |1.1.A.3b| | 1 |
| Direction indicator incorrect colour n/s+o/s rear |1.4.A.2f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg cororded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg corroded |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg corroded |3.3.A.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s rear to front inner sill coroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s rear to front inner sill cororded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s front inner step cororded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s front chassis leg corroded near engine mountain |2.4.A.3| | 1 |
| Nearside Rear Brake disc contaminated oil coated (1.1.14 (b)) | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden bump stop missing |2.4.A.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill next to front leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded next to rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded next to leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Inner Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Outer Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underbody doorstep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underbody door step |5.2.6| | 1 |
| Position lamp not working All (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded to out riggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded to out riggers |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger around shocker |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassie inner and outer chassie |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Centre Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |6.4.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill excessively corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill excessively corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger by swinging shackle excessively corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front edge of drivers step/inner sill excessively corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper section of front chassis rail corroded located in engine compartment (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear outriggers by leaf spring mounts |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear outriggers by leaf spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis crossmember excessively corroded by leaf spring mounting (front eye) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill excessively corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear of inner arch inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chases end plate |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis end plate |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength seal . |2.4.A.3| | 1 |
| Offside Front Radius arm rubber mounting deteriorated resulting in excessive movement Rear Bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shocker |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength VARIOUS PLACES |5.3.6 |a| |i|| | 1 |
| Front Brake disc significantly and obviously worn x2 |1.1.14 |a| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired inner wheel arch |6.2.2 |d| |ii|| | 1 |
| Offside Front Brake disc significantly and obviously worn heavily defaced and corroded (1.1.14 (a) (i)) | 1 |
| Nearside Front Brake disc significantly and obviously worn heavily corroded and defaced (1.1.14 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a)) | 1 |
| Anti-roll bar has excessive play in a pin/bush Both rear |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step to inner sill |5.2.6| | 1 |
| Brake pipe leaking on a hydraulic braking system At connection to load sensing valve |1.1.11 |b| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Engine mount fallen through chassis leg |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger/chassis |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced chassis |6.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Position lamp switch faulty |1.1.2| | 1 |
| Fuel system component leaking excessively or a risk of fire fuel filter housing |6.1.3 |b| |ii|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wing x2 (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Front Engine mounting missing Bottom (6.1.8 (a) (ii)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner bay (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength o/s and n/s inner sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength o/s and n/s inner wheel arch panels |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner and outer sill including floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner and outer sill including floor |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Back panel near chassis rail behind cab |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Behind the driver seat on back panel |5.2.6| | 1 |
| Front Body insecure and dangerous to other road users Front Bumper |6.1.B.1b| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab crossmember holed and corroded supporting front propshaft centre bearing |6.1.B.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush rear d bushes |2.4.G.2| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door step |6.2.2 |d| |i|| | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected suspension leg mounting and inner wheel arch excessively corroded (5.3.6 (a) (ii)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail under bonnet |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail under bonnet |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by bump stops in side out |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by bump stops in side out |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor in to wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing to chassis |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing to chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by front of rear spring hangar (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear of rear spring hangar (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear of rear spring hangar (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear axle by load valve (5.3.6 (a) (i)) | 1 |
| Front Inner Body panel corroded and likely to cause injury both sides (6.2.1 (a) (i)) | 1 |
| Rear Inner Body panel corroded and likely to cause injury both sides (6.2.1 (a) (i)) | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury wing and inner arch (6.2.1 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury wing and inner arch (6.2.1 (a) (i)) | 1 |
| Nearside Inner Body panel corroded and likely to cause injury central sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure modified such that structural rigidity is significantly reduced chassis (6.1.1 (d) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie in spring centre |2.4.A.3| | 1 |
| Nearside Stop lamp(s) likely to become detached (4.3.1 (c) (ii)) | 1 |
| Front Suspension arm ball joint excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch
|2.4.A.3| | 1 |
| Power steering component insecure Power steering fluid reservoir |2.1.5 |d| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced out rigger (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake cable has a seized clevis joint pivot |3.5.1c| | 1 |
| Nearside Rear Braking system leaking n/s/r wheel cylinder |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount area x2 |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn arm rear most bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view outer |8.1.2a| | 1 |
| Lower Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Offside Obligatory mirror missing rid mirror |8.1.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear cross member |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint ball joint sliding up and down in hub mount |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near upper shock mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near front leaf spring mount |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength fletch x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch and floor |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch and floor |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep and back of sill |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch and turret |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor panel - behind rear wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor panel - behind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Body has a projection caused by corrosion floors |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion sill /wheel arch |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion floors |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings around spring hanger |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases centre section crushed |7.1.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.1 |c| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced os front x member (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 holes (5.3.6 (a) (i)) | 1 |
| Offside Front Electrical wiring insecure and connectors likely to become disconnected footwell |4.11 |a| |ii|| | 1 |
| Nearside Front Fuel system component leaking excessively or a risk of fire fuel filter |6.1.3 |b| |ii|| | 1 |
| Front Prop shaft bearing excessively worn first |6.1.7 |b| |i|| | 1 |
| Rear Prop shaft bearing excessively worn second |6.1.7 |b| |i|| | 1 |
| Nearside Rear Outer Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill support and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill in 2 places |2.4.A.3| | 1 |
| Inner Seat belt retracting mechanism defective middle seat belt stuck |5.2.5b| | 1 |
| Nearside Body has a projection caused by damage door lock |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by shock absorber mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by shock absorber mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength STEP (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER SILL (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER SILL (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength MOUNTING (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded arch rear |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid crossmember |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mid crossmember |6.1.1 |c| |i|| | 1 |
| Centre Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL |6.2.2 |d| |i|| | 1 |
| Offside Body component likely to become detached DOOR MIRROR |6.2.1 |a| |ii|| | 1 |
| Offside Rear Lower Leaf spring main leaf fractured |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn REAR WISHBONE BUSH |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn REAR WISHBONE BUSH |5.3.4 |a| |i|| | 1 |
| Rear position lamp|s| not working problem on all rear lights |1.1.A.3b| | 1 |
| Steering rack gaiter split offside gaiter split |2.2.D.2d| | 1 |
| Nearside Headlamp not working on dipped beam plug |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on main beam plug |4.1.1 |a| |ii|| | 1 |
| Nearside Direction indicator not working plug |4.4.1 |a| |ii|| | 1 |
| Nearside Position lamp not working plug |4.2.1 |a|| | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen bulb in wrong |4.1.2 |a|| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Items hanging from mirror |3.1 |a| |ii|| | 1 |
| Nearside Rear Leaf spring to axle fixing bolt insecure rear u bolt. (5.3.1 (a) (i)) | 1 |
| Rear Prop shaft joint excessively worn both center bearings worn. (6.1.7 (c) (i)) | 1 |
| Offside Rear Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step / sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quatre |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quatre |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step (6.2.2 (d) (i)) | 1 |
| Nearside Body insecure to the extent that stability is seriously impaired out riggers x 5 (6.2.2 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at tipper (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x 2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Headlamp aim beam image obviously incorrect bulb in wrong |1.8.A.1b| | 1 |
| Rear Parking brake inoperative on one side handbrake cable snapped (1.4.1 (a)) | 1 |
| Nearside Front Body has a projection caused by corrosion outer sill corroded resulting in hole |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion inner sill corroded resulting in hole |6.1.C.1| | 1 |
| Nearside Front Seat belt missing locking device missing |7.1.2 |a|| | 1 |
| Nearside Front Shock absorber missing |2.7.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Footwell |5.2.6| | 1 |
| Central Prop shaft bearing excessively worn both middle (6.1.7 (b) (i)) | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing hole (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle area. chassis, crossmember, sill and support paneling |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle area, chassis, sill , crossmember and support panneling |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring eye area. chassis, sill, out riggers and other items |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring eye area, chassis, sill, outrigger and other items |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut turret and surrounding area |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour rear lens broken |1.1.A.3e| | 1 |
| Nearside Front Lower Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing rear bush |2.5.B.1a| | 1 |
| Centre Front engine mounting deteriorated resulting in excessive movement bottom gear box bush |6.1.D.1a| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by strut |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by bias valve |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings rear of spring hanger |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step and floor |5.2.6| | 1 |
| Offside Front Outer Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Near side and offside inner rear flitches also near side inner and outer sill sections |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill x2 |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill x3 |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sil x3 |6.1.B.2| | 1 |
| Nearside Front Floor excessively deteriorated marked within 30cm of seat/seat belt mounting point (6.2.4 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked corrosion within 30cm of arb drop link has a hole (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in two places |6.1.B.2| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture Burst during brake test (1.1.11 (a)) | 1 |
| Offside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Inner Seat belt anchorage prescribed area is severely distorted Middle
Corroded through. |5.2.6| | 1 |
| Body insecure and dangerous to other road users tipping body chassis dangerously corroded |6.1.B.1b| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure rear bolt insecure |2.4.G.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step inner sill |5.2.6| | 1 |
| Steering box insecure |2.2.B.1a| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect bulb not fitted correctly |1.8.A.1b| | 1 |
| Rear Statutory seat belt missing centre |5.1.1| | 1 |
| Nearside Passenger`s seat insecure rear seat broken from weld |6.2.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers door step |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step to inner sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner valance /sill |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill from front to rear |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch to step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valance/inner sill |2.4.A.3| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn middle |2.4.G.4d| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in two places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in four places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in one place (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch in three places (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis to floor + step (7.1.1 (a) (i)) | 1 |
| Offside Front Brake hose excessively twisted on full lock (1.1.12 (b) (ii)) | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner and outer sill corroreded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached cross member (6.1.6 (i) (ii)) | 1 |
| Central Front Lower Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Central Front Lower Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced MAIN LEG (6.1.1 (c) (i)) | 1 |
| Centre Rear Vehicle structure has excessive corrosion which adversely affects braking or steering CROSSMEMBERS |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/panel |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rails/shock absorber mountings both sides |5.3.6 |a| |i|| | 1 |
| Nearside Headlamp lens missing (4.1.1 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring and shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring and shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to leaf spring front mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to rear leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to rear valance (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to rear leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Body has a projection caused by damage sill panel |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion sill panel |6.1.C.1| | 1 |
| Nearside Rear Outer Body has a projection caused by corrosion sill panel |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a projection caused by corrosion sill panel |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer and inner sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded underside of drivers step |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above leaf spring |floor | |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shock observer mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger behind |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring rear shackle bolt mounting bracket/ area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength opposite osr shackle bolt corrosion/ behind wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSR sill corroded/holed inner face (5.3.6 (a) (i)) | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion Sill |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mout |2.4.A.3| | 1 |
| Nearside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked yellow |5.3.6 |a| |i|| | 1 |
| Centre Rear Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
| Exhaust has a major leak of exhaust gases Tail section missing |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above bump stop (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing holed (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp flashes rearposition light (4.4.3 (b)) | 1 |
| Brake lever has insufficient reserve travel too high on travel (1.1.2 (a)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing several places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill nears spring hanger |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill at back of step |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases broken |7.1.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member both sides |2.4.A.3| | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected Lens Broken Showing White Light |4.5.1 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Area |5.3.6 |a| |i|| | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seals (6.2.2 (d) (i)) | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seals (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i)) | 1 |
| Exhaust system not adequately supported mountings broken and missing |7.1.1| | 1 |
| Offside Rear Leaf spring anchor pin retaining device insecurely fitted |2.4.B.3b| | 1 |
| Nearside Rear Body has a sharp edge caused by damage sill |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward and rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward and rear |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded lower step |5.2.6| | 1 |
| Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt offside/nearside |2.2.C.1c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top inner |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wheel arch x two areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward and rear mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mountings |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner |6.1.1 |c| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired chassis |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis near fuel tank |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front marked yellow |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill and step marked yellow |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill marked yellow |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door inner sill marked yellow |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at spring hanger mounting marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at spring hanger mounting marked yellow |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering nr tank |6.1.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nr tank |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill all |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section |6.2.2 |d| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in w/arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner seal (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg near shackle bush (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg next to shackle bush (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch next to spring (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Back of wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner seal Under door (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner seal under door (6.1.1 (c) (i)) | 1 |
| Nearside Front Fuel tank insecure Chassis leg corroded which the fuel tank strap is connected to (6.1.3 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre inner seal (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre inner seal (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer seal (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer seal (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body insecure to the extent that stability is seriously impaired Inner arch (6.2.2 (a) (ii)) | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired Inner arch (6.2.2 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section near rear bush |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c)) | 1 |
| Nearside Front Brake pipe inadequately clipped across bulkhead |3.6.B.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Holes in chassis and wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Holes in chassis and wing (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, various points (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, various points (6.1.1 (c) (i)) | 1 |
| Prop shaft bearing housing likely to fail Bearings bushing has failed (6.1.7 (f) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower outer sill area |6.1.B.2| | 1 |
| Rear Reversing lamp inoperative |4.6.1 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill below step has been repaired with patch welding |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill below step excessively corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Steering column locking device insecure |2.1.6| | 1 |
| Nearside Body has a sharp edge caused by damage door handle |6.1.C.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill corroded by seat/seat belt mounting |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded by spring hanger front |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing corroded close to spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting on spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting on spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shockabsorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shockabsorber mounting |2.4.A.3| | 1 |
| Nearside Inner Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Suspension arm insecure |2.4.G.1| | 1 |
| Power steering component leaking rack? |2.1.5 |a|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated above axle area |6.2.4 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated above axle area |6.2.4 |a| |i|| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement susp arm rear bush de/bonded |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases silencer corroded |7.1.2| | 1 |
| Offside Rear Mechanical brake component securing device missing |3.5.1i| | 1 |
| Offside Rear rear brake recording little or no effort drum appears wet |3.7.B.5a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shockabsorber mount floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shockabsorber wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle bush rear panel |2.4.A.3| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded floor next to brake compensator |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle bush mount wheel inner arch |2.4.A.3| | 1 |
| Centre Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Outer Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Nearside Rear Outline marker lamp not working furthest to rear |4.2.1 |a|| | 1 |
| Offside All outline marker lamps not working all OS not working |4.2.1 |a|| | 1 |
| Nearside Rear Brake drum contaminated fluid leaking into rear drum- possible brake cylinder leak |1.1.14 |b|| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower ball joint dust cover |5.3.4 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section / highlighted |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by rear shackle bushes of leaf spring attachment. |highlighted| |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, sprayed in blue |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, sprayed in blue |6.1.B.2| | 1 |
| Centre Front Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch to floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch to floor |2.4.A.3| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt outer |2.2.C.1c| | 1 |
| Offside Front Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5| | 1 |
| Central Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Brake cable damaged |1.1.15 |a|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in 2 places by leaf spring mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in 2 places by leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light lens damaged |1.2.1e| | 1 |
| Front Brake pipe inadequately clipped from master cylinder |3.6.B.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |central| |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis area at leaf spring attachment |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central outer sill area |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength marked yellow (5.3.6 (a) (i)) | 1 |
| Body has an unsafe modification bolts sticking out rear doors |6.2.1 |d| |i|| | 1 |
| Rear fog lamp obviously incorrectly positioned wrong side of vehicle |4.5.4 |a|| | 1 |
| All position lamps light intensity significantly reduced side doent light light up when switching on rear fog affecting other lights also |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front of rear spring in two places, centre above spring, rear of rear spring (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected forward end of rear spring and centre above spring (5.3.6 (a) (ii)) | 1 |
| Power steering component|s| leaking pipes to rack area |2.3.3b| | 1 |
| Front Shock absorber insecure |2.7.2b| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear panel |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mounting |6.1.B.2| | 1 |
| Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
| Road wheel fixing loose nuts loose |5.2.1 |a| |i|| | 1 |
| Body has a sharp edge caused by corrosion nearside outer sill |6.1.C.1| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 1 |
| Service brake grabbing severely and parking brake has little reserve travel (1.2.1 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch to floor |2.4.A.3| | 1 |
| Offside Lower Body panel corroded and likely to cause injury sharp edges | holed| |6.2.1 |a| |i|| | 1 |
| Nearside Lower Body panel corroded and likely to cause injury sharp edges |holed| |6.2.1 |a| |i|| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view glass missing |8.1.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area near front leafspring hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Anti roll bar |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/inner arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded upper inner wheel arch |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x member (above rear axle) (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Needs rear section |7.1.2| | 1 |
| Exhaust system not adequately supported Needs 2 rubber hangers |7.1.1| | 1 |
| Nearside Seat belt anchorage prescribed area is fractured at door catch |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is fractured at door catch |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all inner sill NS & OS |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corrosion rear panel of the chassis |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by damage nail sticking out |6.1.C.1| | 1 |
| Offside Track rod end inappropriately modified |2.2.C.1e| | 1 |
| Offside Front Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Fuel tank insecure rear tank strap corroded |7.2.1| | 1 |
| Offside Rear Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour tailamp lense damaged & can see white light |1.4.A.2f| | 1 |
| Offside Lower Body has a sharp edge caused by corrosion head board step frame |6.1.C.1| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking metal pipe |2.3.3b| | 1 |
| Centre Exhaust has a major leak of exhaust gases exhaust silencer |7.1.2| | 1 |
| Nearside Rear Fuel tank insecure x1 strap corroded away |7.2.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured under step, close to wishbone mount |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area inner and outer |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill area inner and outer |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section around spring |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded MULTIPLE HOLES |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded MULTIPLE HOLES |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor above step |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by brake compensator |6.1.A.1| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear mountings |2.4.A.3| | 1 |
| Nearside Front Position lamp not working roof light inop (4.2.1 (a) (ii)) | 1 |
| Nearside Front Track rod end ball joint has excessive play trackrod end joint badly worn |2.1.3 |b| |i|| | 1 |
| Central Rear Prop shaft flexible coupling excessively deteriorated rear centre prop shaft bearing worn |6.1.7 |d| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step + inner panels (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step + inner panels (6.1.1 (c) (i)) | 1 |
| Dropside cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Nearside Brake prescribed area is excessively corroded load sensing valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure & o/s roll bar worn to links |2.4.G.1| | 1 |
| Offside Outline marker lamp not working x2 |4.2.1 |a|| | 1 |
| Front Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 1 |
| Fuel tank leaking filler pipe |7.2.3| | 1 |
| Offside Rear Anti-roll bar linkage insecure and nearside |2.4.G.1| | 1 |
| Nearside Front Braking system leaking calliper/flexy hose |3.6.A.1| | 1 |
| Offside Rear Upper Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp all cluster interacting |1.4.A.2h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of leaf spring |box sections| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring box section |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch/step behind front wheel |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch in front of wheel and leg top area |2.4.A.3| | 1 |
| Offside Rear Braking system leaking wheel |3.6.A.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at rear 0f front sub frame (6.1.1 (c) (i)) | 1 |
| Offside Rear Drag link end loose |2.2.B.1d| | 1 |
| Nearside Rear Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced and sill to floor (6.1.1 (b) (ii)) | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced and sill to floor (6.1.1 (b) (ii)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system Leaking at union. Dangerous (1.1.11 (b) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension top mount |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis by spring mounting. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Step and outer sill. |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shock absorber area |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember o/s and n/s |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill suspension mounting area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/chassis mounting area |6.1.B.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp interact with sidelamp |1.4.A.2h| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger area & side cheek (chalked) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger & cheek area (chalked) (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength cross member n/s & o/s (chalked) (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring anchor bracket fractured front eye (5.3.1 (b) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen no image |4.1.2 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger / cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/suspension mount prescribed area |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/suspension mount prescribed area |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/ chassis/step prescribed area |6.1.B.2| | 1 |
| Nearside Rear Lower passenger door does not latch securely closed rear loading door. |6.2.B.1a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer step. |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and arch. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner jacking point. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and arch inside side loading door. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and inner wheel arch as marked. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer and inner sill and wheel arch. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill located behind the step. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer step. |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner door/sill mas marked. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside door top of sill. |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill as marked x2 spots. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill end. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger and rear sill as marked. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger and sill as marked. |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Quarter panel under bumper cap. |6.1.B.2| | 1 |
| Vehicle Identification Number not displayed bonnet wont open |0.2 |a|| | 1 |
| Driver`s seat with a defective structure seat base corroded |6.2.5 |a| |i|| | 1 |
| Emissions not tested due to excessive black smoke when revved (8.2.1.2 (d)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to brake compensater as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch multiple holes as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch multiple holes as marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch multiple holes as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step area as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill multiple holes as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill multiple holes as marked (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill as marked (6.1.1 (c) (i)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill as marked (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear crossmember |6.1.A.1| | 1 |
| Offside Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 1 |
| Offside Front Seat belt not functioning as intended not retracting (7.1.2 (c)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at fuel tank area (6.1.1 (c) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch sharp edge (6.2.1 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at rear spring area (6.2.2 (d) (i)) | 1 |
| Nearside Front Other passenger door cannot be opened from outside the vehicle Sliding door (6.2.3 (a)) | 1 |
| Central Rear Other passenger door cannot be opened from outside the vehicle Rear loading door (6.2.3 (a)) | 1 |
| Nearside Front Body component damaged and likely to cause injury Wing mirror cover (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury Wing mirror cover (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis lg |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg. |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre sill. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring hanger mounting. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring hanger front mount. |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top and bottom of chassis rail close to subframe and engine mounts |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail close to front spring hanger |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded near engine mount |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear spring front mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear spring rear mounting,various |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear spring rear mounting,various |2.4.A.3| | 1 |
| Nearside Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring by front and rear mountings |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring by front and rear mountings |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under the step area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsr inner chassis corroded at wheel arch meeting point (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside middle inner seal corroded as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal corroded as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced osr rear of vehicle chassis corroded as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsr rear of vehicle chassis corroded as marked (6.1.1 (c) (i)) | 1 |
| Nearside rear brake recording little or no effort hand break |3.7.B.5a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked |6.1.B.2| | 1 |
| Hazard warning switch faulty hazard lamps not working |1.4.B.1d| | 1 |
| Nearside Rear Body has a sharp edge caused by damage step |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage step |6.1.C.1| | 1 |
| Centre Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Nearside Front Lower Suspension component ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis (5.3.6 (a) (i)) | 1 |
| Brake prescribed area is excessively corroded chassis near load sensor valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by chassis leg |2.4.A.3| | 1 |
| Front Brake disc significantly and obviously worn both sides |1.1.14 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch x2 (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill within 30 cm of seatbelt mounting |7.1.1 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner and outer sills (6.1.1 (c) (i)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively brake (8.4.1 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced foot step (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting........ (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember........ (5.3.6 (a) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system front to rear........ (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting........ (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing........ (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember....... |5.3.6 |a| |i|| | 1 |
| Body component corroded and likely to cause injury side loading door...... |6.2.1 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and arch |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sills (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r o/s/r inner and o/s/f outer sills |6.1.1 |c| |i|| | 1 |
| Offside Front Body has a sharp edge caused by corrosion bumper support |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded within 30cm of rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded within 30cm of rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step + sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner / outer sill (6.1.1 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer sills (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floors (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Front Passenger door cannot be opened from inside the vehicle |6.5.11a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Chassis leg |rear bump stop| |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Chassis leg |rear bump stop| |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor badly corroded |7.1.1 |a| |i|| | 1 |
| Central Prop shaft bearing excessively worn front mount has excessive play |6.1.7 |b| |i|| | 1 |
| Nearside Outer Body insecure to the extent that stability is seriously impaired sill badly corroded |6.2.2 |a| |ii|| | 1 |
| Offside Body insecure to the extent that stability is seriously impaired sill badly corroded |6.2.2 |a| |ii|| | 1 |
| Offside Rear Leaf spring to axle fixing bolt insecure shackle area has corroded away |5.3.1 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member is badly corroded / holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Floor excessively deteriorated close to seat mountings/wheel arch area badly corroded and surrounding area |6.2.4 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated close to seat mountings/wheel arch area badly corroded and surrounding area |6.2.4 |a| |i|| | 1 |
| Nearside Rear Upper Body has a projection caused by corrosion wheel arch, also within 30cm off seat loading |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel marked yellow |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle chassis rigger |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis rigger |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leeg |6.1.B.2| | 1 |
| Brake pedal anti-slip provision incomplete Clutch. |3.3.A.1b| | 1 |
| Nearside Front Steering arm excessively corroded and unserviceable |2.2.C.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch/ floor |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Chassi |5.2.6| | 1 |
| Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Nearside Front Suspension component insecurely attached |5.3.3 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded quarter |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step in two places |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Underarch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Underarch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded both sills |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor mount outer sill/inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor mount outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount outrigger |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under body floor panel (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring mounting corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arche (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassic leg (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring mountain corroded (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring mountain corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced inner wheel arch (6.1.1 (b) (ii)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and quater panel corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced wheel arch corroded (6.1.1 (b) (ii)) | 1 |
| Nearside Front Body component corroded and likely to cause injury wing corroded (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component pin or bush likely to become detached bump stop bush (5.3.4 (a) (ii)) | 1 |
| Exhaust emits dense blue smoke at idle (8.2.1.2 (f)) | 1 |
| Offside Front Outer Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step / inner sill |5.2.6| | 1 |
| Upper Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Front Outer All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Upper Seat belt pretensioner deployed (7.1.4 (a)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Body has a sharp edge caused by damage wing mirror. |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by damage Bumper |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch floorpan |6.1.B.2| | 1 |
| Nearside Inner Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner steps |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt webbing significantly weakened excessively frayed |7.1.2 |b| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring shackle area |6.2.2 |d| |i|| | 1 |
| Steering column movement between the shaft and steering wheel lower column to rack |2.1.2b| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion bumper insecure and wheel arch corroded |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion bumper insecure and wheel arch corroded |6.1.C.1| | 1 |
| Offside Rear Leaf spring cracked at front eye |2.4.B.1a| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.A.1| | 1 |
| Centre Vehicle structure has excessive corrosion which adversely affects braking or steering offside outer |6.1.A.1| | 1 |
| Centre Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement nearside |7.2.4b| | 1 |
| Centre Rear Brake rod locking device insecure |3.5.1l| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear arches |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger, inc floor and wheel arch and rear crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger, inc floor,wheel arch and rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded forward spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded forward spring mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch in several places (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired doorstep under sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep under sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced back cabin panel (7.1.1 (a) (i)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Rear Tie bar/rod rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed |5.3.6 |a| |i|| | 1 |
| Rear Exhaust emits excessive smoke or vapour of any colour BLACK |7.4.B.4| | 1 |
| Nearside Rear Upper Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d bushes |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush d bushes |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 1 |
| Prop shaft bearing excessively worn both centre prop bearings excessively worn (6.1.7 (b) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside panels behind front wheels |2.4.A.3| | 1 |
| Offside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement anti roll to subframe |2.4.G.2| | 1 |
| Nearside Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Brake performance not tested due to seized n/s/f brake |1.2.1 |g|| | 1 |
| Nearside Front Body component damaged and likely to cause injury door mirror casing has exposed sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Front Body component damaged and likely to cause injury wing - sharp edges |6.2.1 |a| |i|| | 1 |
| Offside Front Body component corroded and likely to cause injury wing - sharp edges |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt not functioning as intended not retracting |7.1.2 |c|| | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened broken |3.5.1b| | 1 |
| Towbar component insecure bar to chassis |6.6.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Body has a projection caused by corrosion wing |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end outer |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch two areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended lower arm |2.4.F.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill 2 places (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill (7.1.1 (a) (i)) | 1 |
| Prop shaft bearing excessively worn rear most of 2 (6.1.7 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 1 |
| Rear Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Nearside Rear Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Outline marker lamp not working both (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded axle bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded axle bump stop |2.4.A.3| | 1 |
| Nearside Front Service brake lagging in operation Application and release |1.2.1 |d|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill / wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wing / floor pan |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing / floor pan |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing / floor pan |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outriggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outriggers |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wing |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner closing panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength INNER + OUTER SILL |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength INNER + OUTER SILLS INCLUDING INSIDE SIDE DOOR JAM |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength BOX SECTION + SIDE PANELLING BEHIND WHEEL |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH + FLOOR BY SHOCK MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH + FLOOR BY SHOCK MOUNT |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded doorstep inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep inner sill |5.2.6| | 1 |
| Rear Outer Suspension component mounting prescribed area is excessively corroded panels |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep innr sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner arches floorpan |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger/inner sill area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section around bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded jacking point/sill area |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s/r floor to inner wheel arch panel |as marked| |6.2.2 |d| |i|| | 1 |
| Nearside Rear Brake cable has restricted free movement hand brake cable outer casing worn through on leaf spring |1.1.15 |e|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle (6.1.1 (c) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced inner chassis (6.1.1 (b) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch/chassis (6.1.1 (c) (i)) | 1 |
| Nearside rear brake recording little or no effort parking |3.7.B.5a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of wheel arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing
|6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings o sand n s front |6.1.B.2| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded centre cross member |3.3.A.2| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings o s and n s inner sills and steps |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n s rear inner wing |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front spring mount |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases dpf blocking cap missing |7.1.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step/sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger/spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis |1.1.21 |e| |i|| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system by abs pump (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch by upper shock bush |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch by front spring mount |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp and nearside |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill corroded |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded center inner sill corroded |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis beam |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis beam |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis frame |6.1.B.2| | 1 |
| Offside Upper Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Windscreen damaged and affecting the drivers view of the road In swept area (3.2 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to chassis (5.3.6 (a) (i)) | 1 |
| Nearside Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Front Driver`s seat insecure drivers |6.2.A.1| | 1 |
| Headlamp not working on dipped beam bulb fitted wrong |1.7.5a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded corrosion above rear axle |2.4.A.3| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect BLUB IN WRONG |1.8.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring front mounting area. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring front mounting. |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chasssis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shock absorber top mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting area. |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near subframe mounts (6.1.1 (c) (i)) | 1 |
| Power steering pipe|s| or hose|s| leaking oil leak |2.3.3b| | 1 |
| Exhaust emits excessive smoke or vapour of any colour 6.66m-l |7.4.B.4| | 1 |
| Nearside Rear Passenger`s seat with a defective structure inner wheel arch |6.2.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch upper |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step front wing |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill wing |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill End |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch area (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Nearside Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Obligatory mirror does not provide a view to the rear glass broken (3.3 (c)) | 1 |
| Nearside Rear Inner Body insecure to the extent that stability is seriously impaired sill corroded (6.2.2 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near to front of leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near to front of leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near to rear of leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near to rear of leaf spring mount |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded near to rear of leaf spring mount |2.4.A.3| | 1 |
| Central Front Seat belt locking mechanism does not secure or release missing |5.2.5a| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired both sides outer sills and n/s undersills not fully seam welded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides of rear crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger both sides |rear shackle | |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer rigger |front hanger| |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under wheel arch inner wing in 3 places |2.4.A.3| | 1 |
| Centre Front Statutory seat belt missing stalk missing |5.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill & inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill & inner sill |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill at door step |5.2.6| | 1 |
| Rear Brake pipe at imminent risk of failure or fracture on axle |1.1.11 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer sill |5.3.6 |a| |ii|| | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement cradle excessively corroded |6.1.8 |a| |i|| | 1 |
| Nearside Front Brake pipe leaking Front to rear pipe behind fuel filter |3.6.A.1| | 1 |
| Offside Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Inner Brake pipe leaking wing |3.6.A.1| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch various places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch various places |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch various places |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch various places |2.4.A.3| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 0.75 (8.2.2.2 (f)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area (6.2.2 (d) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded at top of wing liner |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis in front of step |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Fuel tank insecure Both Tank Straps |7.2.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind Step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Support Below Engine Mounting |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded to floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded damper |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner arch |2.4.A.3| | 1 |
| Nearside Front Road wheel fractured |5.2.2 |a|| | 1 |
| Offside Front Seat belt retracting mechanism defective seat belt not working at all |5.2.5b| | 1 |
| Front Upper Front position lamp|s| not working both |1.1.A.3b| | 1 |
| Nearside Outer Body has a projection caused by corrosion outer seal |6.1.C.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/floor |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/floor |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting bumper attachment |6.2.2 |d| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 holes |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 holes |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill in places x2 |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside floor to chassis |6.1.B.2| | 1 |
| Offside Rear Leaf spring shackle pin not correctly positioned |2.4.B.3a| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded step
|2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded step
|2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill and step |5.2.6| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock absorber mounting point |2.4.A.3| | 1 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing repaired with wire |6.1.C.1| | 1 |
| Nearside Rear Lower Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and o/s |6.1.B.2| | 1 |
| Front position lamp|s| not working Both
|1.1.A.3b| | 1 |
| Stop lamp adversely affected by the operation of another lamp Both rear lamp units |1.2.1f| | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Outline marker lamp does not illuminate simultaneously with the position lamps on front wing (4.2.2 (a)) | 1 |
| Nearside Front Outline marker lamp does not illuminate simultaneously with the position lamps top marker (4.2.2 (a)) | 1 |
| Brake cable damaged handbrake cable frayed (1.1.15 (a)) | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which shows white light to the rear Damaged |4.2.3 |b| |ii|| | 1 |
| Bonnet primary retaining device excessively deteriorated Unable to open (3.1 (c)) | 1 |
| Offside Front Outer Suspension arm pin or bush excessively worn Rubber Split (5.3.4 (a) (i)) | 1 |
| Offside Service brake juddering severely |3.7.C.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer chassis bump stop area |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer chassis bump stop area |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of rear spring |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush On axle |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush on axle |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing to strut top (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnet by engine mountain |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mountain |2.4.A.3| | 1 |
| Brake linkage excessively damaged and seriously weakened |3.5.1e| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross members |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross members |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mounting |5.3.6 |a| |ii|| | 1 |
| Offside Headlamp aim not tested head lamp does not work on dip or main beam |1.8.A.1c| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp n/s o/s |1.1.A.3f| | 1 |
| Rear position lamp|s| obviously incorrectly positioned light bar twisted |1.1.A.3a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Front sill under drivers door. |2.4.A.3| | 1 |
| Offside Front Body component corroded and likely to cause injury wing corroded (6.2.1 (a) (i)) | 1 |
| Position lamp not working nearside and offside front upper (4.2.1 (a) (ii)) | 1 |
| Rear Lower Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Prop shaft bearing excessively worn rough (6.1.7 (b) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear sill area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch areas (6.1.1 (c) (i)) | 1 |
| Nearside Rear Dropside insecure (6.2.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember above diff (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cab floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area |6.1.1 |c| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill in several places |5.3.6 |a| |i|| | 1 |
| Nearside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under sill several places |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded under sill several places |5.2.6| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter |6.1.B.2| | 1 |
| Central Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail plate (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded sills |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded sills |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings valance |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind rear of front spring next to spring mounting bracket (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting were front of rear spring mounts (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting were front of rear spring mounts (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill n body mounting bracket (6.1.1 (c) (i)) | 1 |
| Nearside Power steering pipe/hose excessively corroded pipe |2.1.5 |g| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above rear axle |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced valance |6.1.1 |c| |i|| | 1 |
| Nearside Front Oil leaking continuously from engine posing a serious risk to road safety vac pump |8.4.1 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering load sensing valve mounting (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis x2 near spring mounts and inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill panels separated (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side member / (5.3.6 (a) (i)) | 1 |
| Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2 PLACES |6.1.B.2| | 1 |
| Seat belt buckle missing all back seat belts missing (7.1.2 (d)) | 1 |
| Passengers seat insecure rear bench seat not bolted down (6.2.6 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers floor |5.2.6| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush drop link |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement drop link |2.4.G.2| | 1 |
| Nearside Rear Body insecure side panel |6.2.2 |a| |i|| | 1 |
| Offside Rear Body insecure side panel |6.2.2 |a| |i|| | 1 |
| Nearside Rear All position lamps adversely affected by the operation of another lamp affected by indicator |4.2.3 |c|| | 1 |
| Front Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Rear Upper Leaf spring has a deteriorated shackle rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring shackle area |5.3.6 |a| |i|| | 1 |
| Front Service brake lagging in operation |1.2.1 |d|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seatmount doorstep |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded near brake limert |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded FLOOR TO STEP UNDER PASSENGER SEAT |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded SILL NEAR REAR SPRING FRONT MOUNTING PIONT |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by damage body |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage body |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat area floor pan |6.1.B.2| | 1 |
| Offside Front Power steering malfunctioning |2.3.3a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis at rear of cab |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre chassis (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength step |2.4.A.3| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded Handbrake cable mounting point rear of cab |3.1.9| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Under wheel arch several areas |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Under wheel arch several areas |2.4.A.3| | 1 |
| Seat belt stitching badly frayed Drivers |5.2.2b| | 1 |
| Rear Inner Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all over |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Cab behind seat |5.2.6| | 1 |
| Side repeater incorrect colour no lens |1.4.A.2f| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion body stay |6.1.C.1| | 1 |
| Nearside Driver`s view to side impaired by crack |6.9.1b| | 1 |
| Offside Rear rear brakes release unevenly |3.8.A.6| | 1 |
| Nearside Front Seat belt insecurely fixed to the seat (5.2.1a) | 1 |
| Oil leaking excessively from engine timing chain cover area (8.4.1 (a) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush (2.4.G.2) | 1 |
| Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush (2.4.G.2) | 1 |
| Nearside Rear Upper Outline marker lamp not working (4.2.1 (a)) | 1 |
| Offside Front position lamp(s) has less than 50% of the light sources illuminating marker[cab] (1.1.A.3b) | 1 |
| Offside Front Upper All outline marker lamps not working (4.2.1 (a)) | 1 |
| Rear Outline marker lamp not working x 2 (4.2.1 (a)) | 1 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3) | 1 |
| Offside front brakes release unevenly (3.7.B.4) | 1 |
| Central Rear Seat belt has a cut which has significantly weakened the webbing (5.2.2a) | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing near engine mount |6.1.B.2| | 1 |
| Battery insecure and likely to cause a short circuit Offside battery. (4.13 (a) (ii)) | 1 |
| Prop shaft securing bolt loose Both central prop bearing mounts insecure (bolts loose) (6.1.7 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Before cat possibly entre cabin. (6.1.2 (a)) | 1 |
| Fuel system component defective in the case of LPG/CNG/ LNG or hydrogen systems Both LPG tank straps broken and excessively corroded. (6.1.3 (f)) | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced Outer sill corroded/holed (marked with chalk) (6.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill to rear cab (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Door Step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured front eye broken and piece missing |2.4.B.1a| | 1 |
| Offside Rear Leaf spring fractured front eye piece missing |2.4.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x2 (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill x3 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp operation of indicator interferes with other lights |4.4.3 |b|| | 1 |
| Rear fog lamp adversely affected by the operation of another lamp and incorrect colour |4.5.4 |b|| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings spring hangar mount rear of spring |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns/s chassis above load sensor valve |6.1.B.2| | 1 |
| Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings all along n/s rear inner arch to floor area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has a modification which adversely affects braking or steering inner wing |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing to chassis by engine mount |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch to floor area |6.1.A.1| | 1 |
| Nearside Rear Leaf spring anchor pin locking device insecurely fitted |2.4.B.3b| | 1 |
| Offside Rear Leaf spring anchor pin locking device insecurely fitted |2.4.B.3b| | 1 |
| Emissions not tested Vehicle produced excessive smoke (8.2.2.2 (e)) | 1 |
| Offside Rear Upper Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner pannel near rear spring mount |2.4.A.3| | 1 |
| Nearside Front Anti-lock braking system component excessively damaged |1.6 |e|| | 1 |
| Offside Front Anti-lock braking system component excessively damaged |1.6 |e|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under door step |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under door step |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired areas throughout vehicle |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in several places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in several places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under rear of sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under rear of sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under rear quarter panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under rear quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front to rear of inner sill |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis frame (6.2.2 (d) (ii)) | 1 |
| Offside Front Body panel corroded and likely to cause injury step (6.2.1 (a) (i)) | 1 |
| Offside Front Lower Body panel corroded and likely to cause injury sill panel (6.2.1 (a) (i)) | 1 |
| Offside Rear position lamp|s| incorrect colour lens smashed |1.1.A.3e| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step underside (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis rotted under wheel arch rotted |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill rotted |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is inadequately repaired x3 as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind bumper (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front of spring hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front of spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced of step (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced whole of inner sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill central (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Floor excessively deteriorated top of wheel arch (6.2.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring hanger |5.3.6 |a| |i|| | 1 |
| Central Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Outer Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded far rear outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outrigger near front of rear spring |2.4.A.3| | 1 |
| Offside Rear Brake pipe leaking axles |3.6.A.1| | 1 |
| Exhaust has a major leak of exhaust gases middle box |6.1.2 |a|| | 1 |
| Nearside Body component damaged and likely to cause injury door mirror housing |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (front) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (rear) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (rear) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Rear bush on the front arm (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Rear bush on the front arm (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer arch |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush D rubber |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush D rubber |2.4.G.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill marked yellow |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill marked yellow |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill marked yellow |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under arch marked yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill / step |2.4.A.3| | 1 |
| Offside Outer Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front rails and nearside rear body mount (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At offside rear leaf spring, rear mounting area. (5.3.6 (a) (i)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength See offside front chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear chassis marked with chalk |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring hanger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front spring hanger |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to spring hanger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring out rigger |2.4.A.3| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking from a joint pipe running along rack |2.3.3b| | 1 |
| Offside Driver`s view restricted by object stickers |6.9.1a| | 1 |
| Rear Stop lamp incomplete |1.3.2b| | 1 |
| Nearside Rear Lower Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.4d| | 1 |
| Offside Front Seat belt missing (7.1.2 (a)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top shock mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top shock mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension strut area (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting insecure rear sub frame/bush mounting (5.3.3 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering spring mounting |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering spring mouning |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring mouing |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has damage which adversely affects braking or steering to spring mouning |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Offside Body component damaged and likely to cause injury headlamp and indicator |6.2.1 |a| |i|| | 1 |
| Nearside Outline marker lamp not working front and rear |4.2.1 |a|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Front Brake cable has restricted free movement |3.5.1i| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. marked. |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill.marked |5.2.6| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded from rack. marked. |2.3.2| | 1 |
| Brake load sensing valve linkage defective and function impaired siezed (1.1.17 (a)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills |6.1.1 |c| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded inner and outer sill and floor pan corroded |5.2.6| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill has a hole in 3 places (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger from main chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp affected by the indicator (4.2.3 (c)) | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded above rear spring |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL / LEAF SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill / chassis |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded CHASSIS LEG / UNDER BONNET (1.1.21 (e) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NEARSIDE AND OFFSIDE REAR CROSSMEMBER (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded repair plate by load valve split and corroded |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is fractured wing is| loose| as shown |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing as shown |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings weak |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by load valve |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to out rigger |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by damage arch |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger on |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill on |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill on |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill on |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch /inner wing on |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Sill |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH AND O/S/F (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet as indicated with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step holed (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Step holed (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Rear sill panel holed (7.1.1 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear near brake cable bracket as indicated with chalk (6.1.1 (c) (i)) | 1 |
| Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Exhaust system insecure middle mounting area-deteriorating and pipe splitting |6.1.2 |a|| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting O/S/F STEP CORRODED |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Wing |6.2.2 |d| |i|| | 1 |
| Prop shaft bearing excessively worn Both Rear Centre Bearings |6.1.7 |b| |i|| | 1 |
| Nearside Rear Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Rear Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush inner and outer |2.4.G.2| | 1 |
| Rear Prop shaft bearing housing likely to fail marked (6.1.7 (f) (ii)) | 1 |
| Centre Exhaust has a major leak of exhaust gases exhaust box |7.1.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear of rear spring shackle |2.4.B.2| | 1 |
| Front Power steering pipe/hose leaking replace all rusty ones |2.1.5 |a|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Spring eye mounting corroded |out rigger| |6.1.1 |c| |i|| | 1 |
| Offside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity light flashing with indicator |4.2.3 |b| |ii|| | 1 |
| Offside Steering arm deformed rack arm (2.1.3 (c) (i)) | 1 |
| Offside Rear Rear position lamp|s| missing lens broken |1.1.A.3a| | 1 |
| Offside Front Side repeater incorrect colour |4.4.3 |a|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner chassis leg |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced spring hanger weld parted |6.1.1 |a| |i|| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering arch |6.1.1 |c| |ii|| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chasis |6.1.1 |c| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/F AND REAR (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear cross members |2.4.A.3| | 1 |
| Central Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded entrance step from underneath |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded entrance step underneath |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring crossmember |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded lower mounting outer sill and rear of cab area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill and rear of cab area |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing and front chassis under wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing and front chassis under wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired wheel arch from under vehicle |2.4.A.3| | 1 |
| Nearside Rear Brake pipe connection leaking on a hydraulic braking system into cylinder |1.1.11 |b| |ii|| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake cable mount |3.1.9| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced crossmember above tank (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch and strut support (5.3.6 (a) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded nearside and offside outer sills |2.4.A.3| | 1 |
| Offside Rear Outer Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Towbar component insecure BOLT LOOSE |6.6.1| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel & o/s/r |1.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at outer sill at spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at outer sill at spring mopunting |2.4.A.3| | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint at diff end |2.4.G.4b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill chalked |2.4.A.3| | 1 |
| Entrance/exit door deteriorated and function impaired side door not opening |6.2.C.1a| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner/outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner/outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt retracting mechanism defective Passenger. |5.2.5b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Between Inner Sill & Step-Box |5.3.6 |a| |i|| | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BODY |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BODY |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL-ARCH |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL-ARCH |6.1.B.2| | 1 |
| Brake performance not tested rear brake pipe condition |3.7.A.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheelarch |6.1.C.1| | 1 |
| Offside Vehicle structure has a modification which adversely affects braking or steering inner and outer sills |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has a modification which adversely affects braking or steering floor to wheelarch |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has a modification which adversely affects braking or steering floor to wheelarch |6.1.A.1| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Nearside Inner Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Inner Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Front passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Rear Front passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded rear cross member as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger as marked |2.4.A.3| | 1 |
| Offside Front Ball joint dust cover missing |2.2.C.1c| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings just in front of n/s/r wheel arch |two places| inner |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner rear flitch panel corroded away from back valance (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Leaf spring anchor bracket corroded and seriously weakened bothj front anchor bracket and also rear anchor bracket corroded (5.3.1 (b) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure is so deformed it is likely to adversely affect braking or steering chassis leg |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure is so deformed it is likely to adversely affect braking or steering chassis leg |6.1.1 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg within 30cm of engine mount (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Step (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Back quarter (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch to chassis leg box |2.4.A.3| | 1 |
| Exhaust emits dense blue smoke at increased engine speed |6.4.A.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded cab floor |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded crossmember at rear of cab |5.2.6| | 1 |
| Nearside Front Body has a projection caused by corrosion arch |6.1.C.1| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill, under step (6.2.2 (d) (i)) | 1 |
| Offside Rear Rear position lamp|s| incorrect colour showing white to rear |1.1.A.3e| | 1 |
| Air brake cylinder/actuator operating mechanism has excessive travel footbrake |3.6.H.1b| | 1 |
| Nearside Rear position lamp|s| incorrect colour lenz broken |1.1.A.3e| | 1 |
| Offside Rear Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement saddle |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement saddle |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported rubber mount |7.1.1| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor to side panel corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner Sill To Floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner Sill To Floor |5.2.6| | 1 |
| Nearside Rear Braking system leaking Wheel |3.6.A.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER CHASSIS (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury WHEEL ARCH (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Jacking point |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear chassis rails / crossmembers |2.4.A.3| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill |6.1.B.2| | 1 |
| Nearside Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Steering system excessively rough |2.2.D.1| | 1 |
| Nearside Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength by spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis by front strut |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear All position lamps adversely affected by the operation of another lamp bad earth |1.1.A.3f| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp All flash together. |1.1.A.3f| | 1 |
| Front Position lamp not working Both (4.2.1 (a) (ii)) | 1 |
| Body has a sharp edge caused by corrosion near side and oside step area rusty and holed |6.1.C.1| | 1 |
| Offside Driver`s door catch insecure |6.2.B.2| | 1 |
| Central Rear Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill next to spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring attachment (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch area. (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch area. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch area. (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch area. (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner and outer sill. (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner and outer sill. (6.2.2 (d) (i)) | 1 |
| Exhaust system not adequately supported rubbers split |7.1.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing holed |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member at park brake cable anchor point |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top of chassis leg |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above bump stop |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member, multiple places |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member multiple places |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/arch multiple places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/arch multiple places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/floor/arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/floor/arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassic |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced arch |6.1.1 |a| |i|| | 1 |
| Nearside Inner Integral body structure is fractured and structural rigidity is significantly reduced sill holed |6.1.1 |a| |i|| | 1 |
| Offside Outer Integral body structure is fractured and structural rigidity is significantly reduced sill holed x2 |6.1.1 |a| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed x4 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by brake compensater |6.1.1 |c| |i|| | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength x4 box sections by all leaf springs |5.3.6 |a| |i|| | 1 |
| Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced engine cross member (6.1.1 (b) (ii)) | 1 |
| Offside Steering linkage ball joint has excessive play Inner Tie Rod (2.1.3 (b) (i)) | 1 |
| Nearside Rear Stop lamp|s| adversely affected by the operation of another lamp stop and side wrong away around |4.3.3 |b|| | 1 |
| Nearside Leaf spring anchor pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Brake disc significantly and obviously worn Inner Face (1.1.14 (a) (i)) | 1 |
| Offside Front Sub-frame insecure bolt/nut loose |2.4.G.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outter sill |6.2.2 |d| |i|| | 1 |
| Offside Front Lower Track rod end ball joint has excessive play both sides track rod ends dangerouse |2.2.B.1f| | 1 |
| Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings And Offside rear |6.1.B.2| | 1 |
| Central Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step |under side| |5.2.6| | 1 |
| Exhaust system not adequately supported middle clamp broken |7.1.1| | 1 |
| Central Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Service brake effort inadequate at a wheel nearside and offside rear |1.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger x2 |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger area near spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger area |5.3.6 |a| |i|| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area seen from underneath |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded lower floor to rear of drivers seat |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength front of drivers seat |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Offside Front Lower coil spring worn so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded to rear of coolant bottle |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner arch in several places |2.4.A.3| | 1 |
| Offside Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 1 |
| Offside Front Brake pipe inadequately supported And flexible hose |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount to chassis outrigger and floor and crossmember |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount to chassis outrigger and floor and crossmember |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both nearside and offside |5.3.6 |a| |ii|| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement Tempery cap fitted |7.2.4b| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Badly split |2.2.C.1c| | 1 |
| Oil leaking excessively from engine oil switch |8.4.1 |a| |i|| | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced wing |6.1.1 |a| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings pate insecure on rear cross member |6.1.B.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement saddle bush |2.4.G.2| | 1 |
| Offside Brake back plate|s| securing device missing |3.5.1j| | 1 |
| Nearside Brake back plate|s| securing device missing |3.5.1j| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 1.22 (8.2.2.2 (f)) | 1 |
| Nearside Front suspension has excessive movement at a wishbone pin or bush WISHBONE |2.5.A.1c| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner and outer sill areas |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear spring front mounting areas excess corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded osf wheel arch area |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr inner wheel arch area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch near top mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch in two places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill back |6.1.B.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint and boot split |2.4.G.2| | 1 |
| Offside Rear fog lamp not working lens broken which will show white light when working |1.3.2b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor next to seat base and underneath step |5.2.6| | 1 |
| Offside Body has a sharp edge caused by corrosion `B` pillar |6.1.C.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis/flitch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor next to seat base |5.2.6| | 1 |
| Nearside Front Outer Seat belt damaged sufficient to significantly weakened the webbing seat belt webbing |5.2.2a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion corrosion and damage nearside front wing |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded lower wheel arch |2.4.A.3| | 1 |
| Nearside Inner Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Rear Brake pipe inadequately clipped hanging down |3.6.B.1| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all three cross members badly rusted and holed as marked |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear wishbone |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail as marked |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step / sill floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near spring shackle |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step holed (7.1.1 (a) (i)) | 1 |
| Power steering pipe/hose excessively corroded pipe on rack (2.1.5 (g) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill front spring hanger mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill front spring hanger mount x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear spring hanger mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rear spring hanger mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill / rear wheel arch, rear spring hanger mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/ wheel arch, rear spring hanger mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill front spring hanger mount x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch rear spring hanger mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch rear spring hanger mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step x2 |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 1 |
| Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill, central area (6.1.1 (d) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill, central area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Axle has inadequate clearance with the bump stop inscure |2.4.A.1a| | 1 |
| Offside Rear Axle has inadequate clearance with the bump stop inscure |2.4.A.1a| | 1 |
| Nearside Rear Fluid suspension accumulator leaking |2.4.D.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing towards top strut fixing (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing, towards top strut fixing (6.1.1 (c) (i)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp affecting o/s position light (4.4.3 (b)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn rear bush un-bonded (5.3.4 (a) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated forward joint (6.1.7 (d) (i)) | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember with handbrake cable mount heavily corroded (6.1.1 (c) (ii)) | 1 |
| Brake servo defective or ineffective |1.1.10 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner arch near shock absorber |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear vallence |2.4.A.3| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill x5 |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x5 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x5 |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis top side |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle outer sill |6.1.B.2| | 1 |
| Nearside Outer Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced SILL UNDER STEP (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases SECOND SILENCER (6.1.2 (a)) | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired WING SHARP EDGES (6.2.2 (a) (ii)) | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened SPRING BROKEN (5.3.1 (b) (i)) | 1 |
| Nearside Rear rear brake recording little or no effort parking brake |3.7.B.5a| | 1 |
| Nearside brake caliper securing device missing |3.5.1j| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp WITH INDICATOR
|1.1.A.3f| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear box section |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |inner wheel arch| |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering upper chassis leg |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear 1 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear 2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear 3 (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember above spare wheel |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine mounts |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around leaf spring |5.3.6 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` air freshener |8.3.1e| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mount rear sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount on inner edge of outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount on outer edge of outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded within 30cm of McPherson strut |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded within 30cm of shock absorber |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded within 30cm of load sensing valve |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner & outer chassis by shock absorber mount |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear end panel |6.6.6| | 1 |
| Centre Towbar retaining device missing 2 bolts |6.6.3a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember near spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember near spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed behind wheel near shocker (5.3.6 (a) (i)) | 1 |
| Offside Rear Electrical wiring deteriorated, likely to cause a short |1.9.2b| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting cross member (6.1.6 (i) (i)) | 1 |
| Offside Front Halfshaft nut missing |4.2.B.3| | 1 |
| Centre Front Driver`s view to front impaired by damage |6.9.1b| | 1 |
| Nearside Rear Window in an unacceptable condition |3.2 |c| |i|| | 1 |
| Offside Front Lower Suspension arm locating pin incorrectly positioned |2.4.G.3a| | 1 |
| rear brake recording little or no effort PARKING BRAKE |3.7.B.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut turret |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill & door step |5.2.6| | 1 |
| Nearside Front Upper Macpherson strut mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Bonnet retaining device excessively deteriorated unable to open no items in engine bay checked |8.4.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6| | 1 |
| Offside Front wheel bearing rough when rotated noisey |2.5.A.2| | 1 |
| Nearside Rear wheel bearing rough when rotated noisey |2.6.1| | 1 |
| Steering column flexible coupling has excessive play |2.1.5| | 1 |
| Front wheel bearing rough when rotated Nearside and offside |2.5.A.2| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings where marked |6.1.B.2| | 1 |
| Body component corroded and likely to cause injury out riggers and floor corroded to excess |6.2.1 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced box section (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel (5.3.6 (a) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings two parts middle and behind rear wheel |6.1.B.2| | 1 |
| Offside Body has a sharp edge caused by corrosion body side |6.1.C.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body rear cross member |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body out riggers |6.1.B.2| | 1 |
| Fuel tank insecure strap missing |7.2.1| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Central Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings prop shaft mount area |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sills as marked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sills as marked |5.2.6| | 1 |
| Nearside Front Body has a projection caused by corrosion under wheel arch |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion under wheel arch |6.1.C.1| | 1 |
| Inner Body has a projection caused by corrosion both side sils |6.1.C.1| | 1 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| tie rod |2.2.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing / floor area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing / floor area |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x2 |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 1 |
| Rear Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Offside Rear Leaf spring shackle bracket cracked |2.4.B.6b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded door step. |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) | 1 |
| Front Leaf spring anchor pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` clutter on dash |8.3.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Rear Body has a projection caused by corrosion bumper |6.1.C.1| | 1 |
| Body has a sharp edge caused by damage both mirror casings |6.1.C.1| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded door instep |5.2.6| | 1 |
| Offside Rear Leaf spring main leaf fractured Front eye (5.3.1 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component attachment bracket/mounting insecure and impairing directional stability u bolts loose and spring leaves mis-aligned (5.3.3 (a) (ii)) | 1 |
| Drivers seat insecure bolt missing (6.2.5 (a) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s top of chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay top of chassis (6.1.1 (c) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s and o/s floor near seat belt mounts (7.1.1 (a) (i)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor near seat belt mounts (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn n/s and o/s link to bar (5.3.4 (a) (i)) | 1 |
| Front Lower Suspension arm ball joint excessively worn n/s and o/s (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near strut mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake pipe excessively damaged on axle (1.1.11 (c)) | 1 |
| Electrical wiring insecure exposed wiring near throttle pedal inscure |1.9.2a| | 1 |
| Nearside Rear Leaf spring splayed and fouling spring deformed and anchors touching body |2.4.B.1c| | 1 |
| Offside Rear Leaf spring splayed and fouling spring deformed and shackles fouling body |2.4.B.1c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill corroded and holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section by brake balance valve |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear valance by box section / suspension |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr outer sill
nsf outer sill
osr inner sill
nsf inner sill |6.1.B.2| | 1 |
| Offside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Valance |5.3.6 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury Lower wheelarch |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing, various places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing, various places |2.4.A.3| | 1 |
| Offside Glazing/screen/partition insecure and likely to fall out |6.9.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides chassis legs |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing/chassis leg |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded both sides inner sills/side steps |5.2.6| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.A.1| | 1 |
| Prop shaft bearing excessively worn both centre bearing supports collapsed |6.1.7 |b| |i|| | 1 |
| Rear Brake valve leaking L S V |1.1.7 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section and valance |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section and valance |5.3.6 |a| |i|| | 1 |
| Fuel cap/sealing device ineffective temporary cap fitted |6.1.3 |b| |i|| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| front eye |2.4.B.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Corner chassis |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Chassis / inner sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings At load valve |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x3 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x6 |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x4 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corner @ bumper |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corner @ bumper |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner corner |2.4.A.3| | 1 |
| Nearside Front Body has excessive displacement which may lead to loss of vehicle control to rear |6.1.B.1a| | 1 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn rear bearing on propshaft |2.4.G.4d| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch lower (6.1.1 (c) (i)) | 1 |
| Nearside Rear Electrical wiring likely to touch hot or rotating parts hanging on wheel (4.11 (a) (iii)) | 1 |
| Stop lamp(s) with a multiple light source more than 1/2 not functioning hi level (4.3.1 (a) (ii)) | 1 |
| Nearside Upper All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre around spare wheel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cheek |6.1.B.2| | 1 |
| Nearside Front Macpherson strut attachment bracket/mounting likely to become detached pinch bolt loose (5.3.3 (a) (ii)) | 1 |
| Brake load sensing valve seized but ABS functioning valve seized but not got abs (1.1.17 (c) (i)) | 1 |
| Horn sound not in accordance with requirements air horns fitted (7.7 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around rear of nearside rear of leaf spring and offside rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Front Drive shaft flexible coupling excessively deteriorated clip |6.1.7 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch two places |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch next to chassis rail and top of leg |6.2.2 |d| |i|| | 1 |
| Axle insecure both side rubbers missing |5.1.1 |b| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides next to leaf springs |5.3.6 |a| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides floor to arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner floor to seat |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step / sill (6.2.2 (d) (i)) | 1 |
| Nearside Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. passenger sliding door step plastic top edge broken and piece missing |6.1.E.1| | 1 |
| Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, outrigger and crossmember in several places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, outrigger and crossmember in several places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing x 3 |chalked| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |chalked| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |chalked| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill|chalked| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger and sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/inner sill (5.3.6 (a) (i)) | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer body panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer body panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired outer body panel |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases exhaust snapped |7.1.2| | 1 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush shackle bush |2.4.B.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush shackle bush |2.4.B.2| | 1 |
| Fuel system component leaking diesel leak on diesel pump |7.2.3| | 1 |
| Offside Front Body has a sharp edge caused by damage mirror back missing |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill holed |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill length |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis out rigger holed |2.4.A.3| | 1 |
| Engine mounting excessively loose lower gearbox stabiliser |6.1.8 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced vehicle very badly corroded all welding marked with yellow chalk |7.1.1 |a| |i|| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill under door |6.1.B.2| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel leak (8.4.1 (a) (i)) | 1 |
| Prop shaft joint excessively worn rear prop front joint |6.1.7 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced bulkhead |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced bulk head |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering step and sill |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Body has a projection caused by damage bumper end gap |6.1.C.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole vehicle |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole vehicle |6.1.B.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement plastic temporary fuel cap fitted |7.2.4b| | 1 |
| Exhaust has a major leak of exhaust gases center silencer |7.1.2| | 1 |
| Nearside Front Brake pipe inadequately supported to flexi |3.6.B.1| | 1 |
| Nearside Body component damaged and likely to cause injury drop down |6.2.1 |a| |i|| | 1 |
| Offside Body component damaged and likely to cause injury drop down |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Body component damaged and likely to cause injury sill area |6.2.1 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill into box section behind step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached de-bonded (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Service brake excessively binding sufficient to prevent bearing checks (1.2.1 (f)) | 1 |
| Nearside Rear Leaf spring fractured Front attachment (5.3.1 (b) (i)) | 1 |
| Offside Rear Leaf spring fractured Front attachment (5.3.1 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis leg |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii|| | 1 |
| Front Exhaust system insecure hanger |6.1.2 |a|| | 1 |
| Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded door step area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded door step area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheelarch to floor area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor area |2.4.A.3| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door hinge (6.1.1 (c) (i)) | 1 |
| Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Nearside Headlamp lens seriously defective no pattern (4.1.1 (b) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect both H I D bulbs fitted (4.1.2 (c)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step area (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured eye (5.3.1 (b) (ii)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn wish bone (5.3.4 (a) (i)) | 1 |
| Nearside Inner Steering linkage ball joint has excessive play rack (2.1.3 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Lower Step And Inner Sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Lower Step And Inner Sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front Leaf Spring Mount / Inner Sill |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6| | 1 |
| Nearside Rear Leaf spring fractured Front Leaf Spring Eye Snapped |2.4.B.1a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at inner wheel arch marked with yellow chalk |6.1.B.2| | 1 |
| Offside Front Driver`s seat insecure seat base corroded and holed |6.2.A.1| | 1 |
| Nearside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured front |5.3.1 |b| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sil |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed, complete |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch holed |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by damage broken lens |6.1.C.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill pannel |6.1.B.2| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Stop lamp not in good working order |function impaired| |1.3.2b| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger to floor as marked with yellow chalk |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked with yellow chalk |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet rigger |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper suspension leg |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near rear leaf spring |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill Rusty and Holed |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and o/s frontsteps |6.1.B.2| | 1 |
| Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength n/s and o/s floor holed inside cab |2.4.A.3| | 1 |
| Offside Body has a projection caused by damage corner bumper missing and holed sharp edges |6.1.C.1| | 1 |
| Nearside Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by damage wheelarch/mudflap |6.1.C.1| | 1 |
| Nearside Rear Leaf spring fractured At spring anchor |5.3.1 |b| |i|| | 1 |
| Front Upper Position lamp not working nearside and offside |4.2.1 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sills and wheel arches |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer sills and wheel arches |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides rear leaf spring mounts |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both sides rear chassis box sections |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded Both sides inner wing panels |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch all round |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded next to shocker top |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering on bulk head inner chassis |6.1.A.1| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear chassis |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both sides outer sills and underbody step area |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All inner wheel arches |6.1.B.2| | 1 |
| Offside Rear Bumper likely to become detached |6.1.4 |a| |ii|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area upper |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg at load vale area |3.3.A.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back panel (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting foot step (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn bottom arm rear bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion dropside |6.1.C.1| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour lens damaged |1.1.A.3e| | 1 |
| Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near sub frame |6.1.B.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings middle |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Nearside Front Inner Front suspension has a loose unit in the upper support bearing assembly |2.5.B.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill |2.4.A.3| | 1 |
| Nearside Front Lower Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Offside Front Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on chassis |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded on chassis |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near back mounting |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear under sill holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under sill holed |2.4.A.3| | 1 |
| Nearside Front Position lamp not working side light (4.2.1 (a) (ii)) | 1 |
| Brake pipe inadequately clipped under master cylinder |3.6.B.1| | 1 |
| Nearside Front Inner Seat belt buckle missing (7.1.2 (d)) | 1 |
| Nearside Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor - inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor - inner sill |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under floor - inner and outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor - inner and outer sill |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings radiator crossmember |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill marked in chalk |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill marked in chalk |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill marked in chalk |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger marked in chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis marked in chalk |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis marked in chalk |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill marked in chalk |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill marked in chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill marked in chalk |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded rigger |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded /wheel/ arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill other end |5.2.6| | 1 |
| Offside Front Driver`s seat with a defective structure Height mechanism worn |6.2.5 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing/chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger& back panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Back panel |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis around engine mounting |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Front of outrigger repaired with fibre glass |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Central Rear Brake pipe fouled by moving parts rusted body x member chafing pipe |3.6.B.2a| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill /step (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step corrded |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded |6.1.1 |c| |i|| | 1 |
| Front Body panel damaged and likely to cause injury grill broken sharp edeges |6.2.1 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush `D` rubber |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush `D` rubber |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill area/step |5.2.6| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Wing above bumper |6.1.C.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis next to fuel tank |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Centre Section broke |7.1.2| | 1 |
| Rear Exhaust system not adequately supported Rubber broke |7.1.1| | 1 |
| Exhaust has a major leak of exhaust gases Middle silencer |7.1.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded full inner sill |2.4.A.3| | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement chassis at nearside mounting corroded |6.1.8 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced and offside step panel |7.1.1 |a| |i|| | 1 |
| Nearside Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached and offside rear |6.1.6 |i| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area |5.3.6 |a| |i|| | 1 |
| Brake prescribed area is excessively corroded Rear load sensing valve |1.1.21 |e| |i|| | 1 |
| Fuel tank insecure fuel strap broken |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near shackle mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer wheel arch |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired outer sill and sill back needs seam welding |2.4.A.3| | 1 |
| Offside Rear Leaf spring fitted in such a way that the axle is misaligned |2.4.B.1e| | 1 |
| Offside Front Upper Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill underneath has corrosion |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill underneath corroded |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear floors to wheel arches and inner valances and body panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear floors to wheel arches and inner valances and body panel |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step sill inner panels |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Shock absorber mount |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Shock absorber mount |6.1.1 |c| |ii|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner step (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front strut mount (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front strut mount (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch inner (6.2.2 (d) (i)) | 1 |
| Vehicle structure inadequately repaired such that structural rigidity is significantly reduced ALL PREVIOUS REPAIRS.
Holes filled with stick pads and resin. Not strong enough weld repair. (6.1.1 (d) (i)) | 1 |
| Service brake effort inadequate at a wheel rears (1.2.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member at rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis member next to brake load valve. |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch and floor to wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch and floor to wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill to outer |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above wheel within prescribed area of shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Front Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s rear crossmember (5.3.6 (a) (i)) | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear complete |6.1.B.2| | 1 |
| Nearside Front Position lamp not working Side light not working |4.2.1 |a|| | 1 |
| Offside Front Position lamp not working side light not working |4.2.1 |a|| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury cab step excessively holed |6.2.8 |a| |ii|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced O/s Outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced o/s rear outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced o/s rear inner sill holed |7.1.1 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated o/s front floor pan of cab step holed |6.2.4 |a| |i|| | 1 |
| Nearside Front Floor excessively deteriorated n/s front floor pan cab step holed |6.2.4 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced n/s rear outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s rear chassis holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting o/s rear chassis holed next to tow bar mount |6.1.6 |i| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s front inner arch corroded and holed |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front chassis corroded and holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Middle cross member |6.1.B.2| | 1 |
| Rear position lamp|s| incorrect colour Marker lights showing white light |1.1.A.3e| | 1 |
| Brake load sensing valve seized Low brake reading |3.6.E.3| | 1 |
| Offside Lower Ball joint has excessive play not seated correctly |2.2.B.1f| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced rear lamps interact with each other |4.2.3 |a| |ii|| | 1 |
| Nearside Front Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Nearside Fuel tank insecure fuel tank strap nearly corroded through (6.1.3 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab to chassis (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab to chassis (6.2.2 (d) (i)) | 1 |
| Prop shaft bearing housing likely to fail center |6.1.7 |f| |ii|| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab |7.1.1 |a| |i|| | 1 |
| Floor insecure |6.2.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt also play in ball joint |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear 3 spots |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills all the way down (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills all the way down (7.1.1 (a) (i)) | 1 |
| Electrical wiring inadequately supported wires tied to moving handbrake cable |1.9.2a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor/step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor to chassis member (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis members to panels to suspension housing (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger support |6.1.1 |c| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired to floor to sills to body |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced to floor to sills to body |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Drive belt excessively worn (6.1.7 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Nearside brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Front passenger door catch insecure Striker post (6.2.3 (c) (ii)) | 1 |
| Offside Front Inner Suspension arm pin or bush likely to become detached Rear bush (5.3.4 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail within engine bay |2.4.A.3| | 1 |
| Nearside Outline marker lamp not working Both marker lamps (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working Central lamp (4.2.1 (a) (ii)) | 1 |
| Nearside Front Outer Body has a projection caused by corrosion Wing |6.1.C.1| | 1 |
| Hazard warning switch faulty Not working |1.4.B.1d| | 1 |
| Rear Brake rod excessively worn and seriously weakened |3.5.1e| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Prop shaft bearing excessively worn front and rear (6.1.7 (b) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill excessively corroded |7.1.1 |a| |i|| | 1 |
| Prop shaft bearing housing likely to fail rear |6.1.7 |f| |ii|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arche area |5.3.6 |a| |i|| | 1 |
| Power steering component leaking rack area |2.1.5 |a|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill step (7.1.1 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint Nut loose |2.4.G.2| | 1 |
| Offside Front Lower Steering component mounting prescribed area is excessively corroded sill inner and outer |2.2.C.1h| | 1 |
| Offside Front Trailing arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front out riger |2.4.A.3| | 1 |
| Nearside Front passenger door catch missing |6.2.B.2| | 1 |
| Nearside Rear Braking system leaking load sensing |3.6.A.1| | 1 |
| Rear Anti-roll bar linkage insecurely attached Both sides . Holes elongated (5.3.3 (a) (i)) | 1 |
| Nearside Brake cable damaged rubbed through by wheel (1.1.15 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis near anti-roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Power steering component|s| leaking steering rack |2.3.3b| | 1 |
| Nearside Rear Brake valve leaking load sensing |3.6.A.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan to rear bulkhead |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan to bulkhead |6.1.B.2| | 1 |
| Centre Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floorpan to bulkhead |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member in front of rear axle |6.1.B.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Handbrake mounting cross member (1.1.21 (e) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded subframe mount (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front crossmember near cab (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Rear most bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Rear most bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured Front spring eye |5.3.1 |b| |i|| | 1 |
| Central Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember |6.1.1 |c| |i|| | 1 |
| Offside Front Engine mounting fractured engine mount on cross member excessively corroded (6.1.8 (a) (ii)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 1 |
| Nearside Front Floor excessively deteriorated 30cm away from the inner step |6.2.4 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch on the air box |6.2.2 |d| |i|| | 1 |
| Nearside Front Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Front Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Nearside Rear Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal |6.2.2 |d| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail inner less than 30cm away from shock absorber | yellow chalk| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings | marked with yellow chalk | |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner seal marked with yellow chalk |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal marked with yellow chalk |6.1.B.2| | 1 |
| Offside Rear position lamp|s| not working MARKER LIGHT |1.1.A.3b| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sil (6.2.2 (d) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg, underside, marked in yellow (5.3.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected on top of cassis leg, also sides and bottom, all marked yellow (5.3.6 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded, marked yellow (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cill and step corroded, marked yellow (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cill and step corroded, marked yellow (7.1.1 (a) (i)) | 1 |
| Nearside Rear Position lamp not working with lens missing (4.2.1 (a) (ii)) | 1 |
| Fuel tank insecure strap corroded and broken (6.1.3 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Rear Leaf spring fractured at front eye (5.3.1 (b) (i)) | 1 |
| Offside Front Headlamp aim beam image obviously incorrect misted up /// |1.8.A.1b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x2 |6.1.B.2| | 1 |
| Rear fog lamp does not emit a steady red light lense broke, white light to rear |4.5.4 |a|| | 1 |
| Offside Front Lower Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Road wheel fixing missing wheel nut (5.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded marked in yellow |5.2.6| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring, chassis. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ sring clamp. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ sring clamp. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch, floor pan. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch, floor pan. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ rear spring. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ rear spring. (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis out rigger holed |6.1.A.1| | 1 |
| Brake pipe leaking metal brake pipe above fuel tank burst during roller brake test. |3.6.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded towards rear of offside outer sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded towards rear of nearside outer sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded front end of nearside inner sill and middle of step under vehicle |5.2.6| | 1 |
| Nearside Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 1 |
| Offside Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering centre sill |6.1.A.1| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering centre sill |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering centre sill |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering centre sill |6.1.A.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement front bush |2.4.G.2| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded & outer door sill |2.4.A.3| | 1 |
| Bonnet primary retaining device excessively deteriorated Bonnet won???t open |3.1 |c|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch too floor |2.4.A.3| | 1 |
| Power steering component|s| leaking rack leaking at pinion |2.3.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember shackle mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger shackle area |2.4.A.3| | 1 |
| Stop lamp emits other than a steady red light both |1.2.1e| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb fitment? |1.8.A.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch and sill inner and outer |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch sill inner and outer |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch also chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch also chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Front drive shaft bent |2.5.C.2a| | 1 |
| Nearside Front Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear |8.1.2b| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush split |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine bay chassis rusted through |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch & chassis rusted through |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rusted through |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rusted through |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill to wheel arch rusted through |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded door step rusted through |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mount - outer sill and inner arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring rear mount - chassis outward leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mount - inner sill and inner arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring rear mount - chassis outward leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mount outersilland inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mount chassis outward leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mount innersill and inner wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mount chassis outward leg |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear of rear leaf spring mounts |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both centre inner sills to outriggers |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner sills and outriggers |2.4.A.3| | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Offside chassis leg (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure bracket broken |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring front hanger (5.3.6 (a) (i)) | 1 |
| Front Headlamp incorrect colour BOTH |1.7.5b| | 1 |
| Front Front position lamp|s| incorrect colour BOTH |1.1.A.3e| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SPRING MOUNT |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR CHASSIS LEGS ADJ TO SPRING MOUNT LOCATION |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement main rear bush |2.4.G.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded mid sill area |5.2.6| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area | near sub frame | |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring eye |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step well area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step well area |5.2.6| | 1 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt front |2.2.C.1c| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp indicator |1.1.A.3f| | 1 |
| Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values Smoke limit of 1.19 M/1 - First Acceleration reading 5.46 M/1 |8.2.2.2 |f|| | 1 |
| Offside Rear Body component corroded and likely to cause injury Wheel arch / sill panel corroded with sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is inadequately repaired inner wheel repair plate (1.1.21 (e) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded o/s/f chassis (1.1.21 (e) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch (1.1.21 (e) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both bolts loose (5.3.4 (a) (i)) | 1 |
| Dropside likely to become detached both sides, all supports for clips corroded (6.2.1 (a) (ii)) | 1 |
| Floor in such a condition it is likely to cause load insecurity or instability floor corroded (6.2.4 (a) (ii)) | 1 |
| Floor insecure floor mountings and support structures corroded (6.2.4 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn 2 bushes (5.3.4 (a) (i)) | 1 |
| Position lamp likely to become detached both rear light units (4.2.1 (c) (ii)) | 1 |
| Nearside Front Brake hose excessively damaged brake hose inscure |1.1.12 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting (5.3.6 (a) (i)) | 1 |
| Front Outer Seat belt anchorage prescribed area is excessively corroded sill both sides |5.2.6| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting corrosion hole at outrigger/chassis adjacent to rear spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill either side of repair (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch at fiont (6.1.1 (c) (i)) | 1 |
| Nearside Position lamp showing white light to the rear lens missing (4.2.3 (a) (ii)) | 1 |
| Central Body component damaged and likely to cause injury door jagged edge (6.2.1 (a) (i)) | 1 |
| Power steering component leaking at rack from pipes (2.1.5 (a)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis all across (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing rear of arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing rear of arch and top of arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill below door (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central chassis post (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor front of arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting by exhaust mount (5.3.6 (a) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front center and rear |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front step area and central and rear |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis rail by fuel tank |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to floor area |6.1.1 |c| |i|| | 1 |
| Central Rear Prop shaft flexible coupling excessively deteriorated prop mounting |6.1.7 |d| |i|| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting and offside rear chasis rail |6.1.6 |i| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded by fuel tank |5.2.6| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill behind step (6.1.1 (c) (i)) | 1 |
| Central Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside sill behind door at rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box |6.1.B.2| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded and adrift (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rearmost outrigger holed and corroded(spring hanger) (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure is deformed and structural rigidity is significantly reduced both sides chassis rails swollen and corroded(behind rear wheels) (6.1.1 (a) (i)) | 1 |
| Offside Seat belt damaged sufficient to significantly weakened the webbing drivers |5.2.2a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear end of nearside inner sill under vehicle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassie |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie rail |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet marked in yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch marked in yellow |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded marked in yellow on chassie rail |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Road wheel fixing missing x1 (5.2.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt affected by a cracked seat frame front |5.2.1b| | 1 |
| Road wheel badly damaged n/s/f |4.2.A.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sll |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded lower step / inner sill |5.2.6| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sping hangers both sides |6.1.A.1| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear spring hanger areas corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shock absorberfloor area corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger,sill |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear chassis (5.3.6 (a) (i)) | 1 |
| Stop lamp not working Nearside |1.2.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail | 3 places | |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn inner rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind roadwheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind roadwheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel cylinder leaking (1.2.1 (a) (i)) | 1 |
| Offside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle, rear panel/inner end. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle, rear panel/inner end. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Anchor, lateral box section. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Anchor, lateral box section. (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded complete inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded complete inner sill |2.4.A.3| | 1 |
| Fuel cap/sealing device ineffective temp cap (6.1.3 (b) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill excessively corroded |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill excessively corroded |6.1.B.2| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded lower floor + inner arch area |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded lower floor + inner arch area |2.4.A.3| | 1 |
| Power steering component|s| leaking from filler cap, looks like fluid is contaminated with another fluid |2.3.3b| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulk head (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side frame (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis corroded (5.3.6 (a) (i)) | 1 |
| Power steering component leaking Steering rack joint |2.1.5 |a|| | 1 |
| Nearside Windscreen damaged and affecting the driver`s view of the road cracked |3.2 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis holed & corroded : marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis holed & corroded : marked yellow |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Central Chassis holed & corroded : marked yellow |2.4.A.3| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings b post |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outter sill and step |6.1.B.2| | 1 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded corner of cab |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded corner of cab |5.2.6| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is inadequately repaired cab cross member |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing & chassis |2.4.A.3| | 1 |
| Front Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Offside Lower Rear fog lamp not working |1.3.2b| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp both, bad earth all lights |1.2.1f| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill holed at cab step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill at cab step holed |5.2.6| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded and middle and nearside rear crossmember |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded and offside rear crossmember near antroll bar upper mounts |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded and lower inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember near rear spring front mount |2.4.A.3| | 1 |
| Rear Braking system leaking brake compensator |3.6.A.1| | 1 |
| Offside Rear Brake pipe leaking not connected |3.6.A.1| | 1 |
| Nearside Side repeater excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting rivet missing |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and offside |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x2 (6.2.2 (d) (i)) | 1 |
| Centre Rear Drive shaft which forms part of the suspension support bearing excessively worn PROPSHAFT SUPPORT BEARING |2.4.G.4d| | 1 |
| Offside Front suspension retaining device ineffective |2.5.A.4| | 1 |
| Front Body component corroded and likely to cause injury nearside and offside front wings sharp edges ( corrosion) (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch box section @ subframe mounting prescribed area (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross-member @ nearside and offside rear anti-roll bar linkage mountings (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis crossmember at rear spring rear hangers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most cross-member @ spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross-member ( 2nd in from rear) @ anti-roll bar linkage mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings wheelarch/floorpan within 30cm of seat mounting |6.1.B.2| | 1 |
| Nearside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded floor shock mounting area |2.4.A.3| | 1 |
| Nearside Front Side repeater missing |1.5.1a| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.1| | 1 |
| Sub-frame modified and seriously weakened |2.4.A.2| | 1 |
| Offside Rear Torque/reaction arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Direction indicator flashing more than 120 times a minute side repeater staying on |1.4.A.2g| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength foot step under neath (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Sub-frame insecurely attached rear most fixing (5.3.3 (a) (i)) | 1 |
| Offside Leaf spring to axle fixing bolt insecure |5.3.1 |a| |i|| | 1 |
| Nearside Rear Upper Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear inner bush |2.5.A.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer quarter panel holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel holed |2.4.A.3| | 1 |
| Nearside Front Side repeater excessively deteriorated so that it is not visible from a reasonable distance lens missing |1.4.A.2e| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rust nsf spring mount two places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded rust osf spring mount two places |2.4.A.3| | 1 |
| Inner Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Front Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger area |2.4.A.3| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn lower arm bush |5.3.4 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab above exhaust |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cab step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Central Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Offside Rear Axle beam has excessive vertical movement between stub axle and axle beam u bolt broken |2.5.A.1a| | 1 |
| Brake cable damaged broken |1.1.15 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor step |6.1.B.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Entire sill. both sides (6.2.2 (d) (i)) | 1 |
| Nearside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side connections to chassis heavily corroded|holes | |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sides are corroded heavily |holes| |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear box section |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger |6.1.B.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near side front inner wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Off side front wheel arch |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near side inner and outer sills |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside inner and outer sills |6.2.2 |d| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near side rear chassis |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside rear chassis |6.1.1 |c| |i|| | 1 |
| Body component corroded and likely to cause injury Offside and Near side front wings are corroded on front edge. |6.2.1 |a| |i|| | 1 |
| Offside Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion on step near drivers seat mounting points (7.1.1 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both inner sills at rear of steps |6.1.1 |c| |i|| | 1 |
| Fuel hose leaking by tank (6.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt wishbone |2.4.G.2| | 1 |
| Nearside Lower Suspension arm rubber bush deteriorated resulting in excessive movement front rear wishbone |2.4.G.2| | 1 |
| Offside Lower Suspension arm rubber bush deteriorated resulting in excessive movement front rear wishbone |2.4.G.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp indicator and tail light affected |1.1.A.3f| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear leaf spring front eye bush badly worn |2.4.B.2| | 1 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear leaf spring front eye bush worn |2.4.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush lower arm rear bush badly worn |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember nearleaf spring front eye corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember near leaf spring front eye corroded |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint lower arm ball joint very badly worn |2.4.G.2| | 1 |
| Nearside Front Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Outline marker lamp not working all marker lamps (4.2.1 (a) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear D bushes (5.3.4 (a) (i)) | 1 |
| Obligatory mirror seriously damaged, affecting the rear view both (3.3 (b) (ii)) | 1 |
| Track rod end ball joint has excessive play both (2.1.3 (b) (i)) | 1 |
| Emissions not tested due to condition of oil leak (8.2.2.2 (e)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear under sills badly (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sills badly (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength both rear sills badly (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength leaf spring rear mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner flitch in several places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis rail outrigger (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner flitches badly in several places (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis rails / inner flitches (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner flitches in several places (5.3.6 (a) (i)) | 1 |
| Headlamp not working on dipped beam unit broken |1.7.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded side seal |2.4.A.3| | 1 |
| Offside Front Outer Body component likely to become detached step to mount rear |6.2.1 |a| |ii|| | 1 |
| Offside Front Position lamp switch does not illuminate the front and rear position lamps with a single operation Operating Light Switch Does Not Illuminate Either Front or Rear Position Lamps (4.2.2 (a)) | 1 |
| Central Front Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
| Nearside Front Lower Suspension component pin or bush excessively worn Rear Bush on Lower Nearside Wishbone Excessively Worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Outer Brake pipe leaking on a hydraulic braking system Rigid Pipe Going to Caliper Leaking at Joint. (1.1.11 (b) (ii)) | 1 |
| Central Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Within 30cm of Rear Spring Hanger Bracket (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Main Chassis Above Rear Axle Split and Corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Main Chassis Above Rear Axle Split and Corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Repair Has Been Undertaken With Expanding Foam (6.1.1 (d) (i)) | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced Repair Has Been Undertaken With Expanding Foam (6.1.1 (d) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer + Inner Sill Corroded and Holed Under Passenger Step area Also Rear Most panel (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer + Inner Sill Corroded and Holed Under Drivers Step area Also Rear Most panel (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch Corroded and Holed (6.1.1 (c) (i)) | 1 |
| Exhaust system not adequately supported front rubber broken and adrift |7.1.1| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both rear spring shackles |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded an middle |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing corroded and holed |6.1.C.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor centre and front |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to wheel arch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by shockadsorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by shockadsorber |2.4.A.3| | 1 |
| Offside Rear Service brake lagging in operation possible fluid on brake linings (1.2.1 (d)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chaasis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassy in bulkhead (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired o/s n/s steps (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s n/s inner and outter steps (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x5 (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner whel arch x4 (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s o/s inner and outter chassy (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle x member (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s n/s chassy (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre |6.1.1 |c| |i|| | 1 |
| Steering component is not secure to the vehicle structure power steering reservoir |2.2.B.1a| | 1 |
| Inner Rear Anti-roll bar insecure |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis outrigger/ quarter panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger/ quarter panel |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch/ outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis near anchor bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch 30cm from shock |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner wheel arch at front |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch at back |2.4.A.3| | 1 |
| Nearside Rear Brake pipe likely to become detached or damaged front to rear x2 rubbing Load sensing valve & N/S handbrake cable (1.1.11 (d) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step and out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg x2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top strut mount area (5.3.6 (a) (i)) | 1 |
| Suspension component corroded and seriously weakened center prop mount corroded |5.3.3 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills /step (7.1.1 (a) (i)) | 1 |
| Front Prop shaft flexible coupling excessively deteriorated main mounting (6.1.7 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing panelling (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake prescribed area is excessively corroded chassis,30cm to brake fixing (1.1.21 (e) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` 3cm crack centre of windscreen |8.3.1b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to rear leaf spring |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers door step |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***outer cill*** |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***step*** |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***inner wheel arch*** |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***inner cill*** |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing top suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Front Body has a projection caused by damage wing insecure |6.1.C.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x3 holes |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x 5 holes |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mounting (5.3.6 (a) (i)) | 1 |
| Centre Rear Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 1 |
| Centre Rear Anti-lock braking system wiring excessively damaged |3.4.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and covered with filler |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded flooring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded flooring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 1/4 panel |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar insecurely attached nut loose (5.3.3 (a) (i)) | 1 |
| Offside Rear Anti-roll bar insecurely attached nut loose (5.3.3 (a) (i)) | 1 |
| Brake cable inappropriately repaired brake cable fouling body |3.5.1n| | 1 |
| Fuel cap/sealing device ineffective fuel cap does not fix properley |6.1.3 |b| |i|| | 1 |
| Nearside All position lamps not working n/s side reapeter/ indicator not working |4.2.1 |a|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired front step under vehicle repaired with fiber glass |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill under vehicle repaired with fiber glass |6.2.2 |d| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer at gearbox mount (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at engine mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear leaf spring mount points (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member and inner and outer rear corner (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer corner (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper sill in door frame (6.1.1 (c) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near side |6.1.1 |c| |i|| | 1 |
| Nearside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner next to leaf mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wheel arch at rear |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill/outrigger |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch at rear/valance |2.4.A.3| | 1 |
| Power steering component|s| leaking at Steering rack |2.3.3b| | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced No beam image defective bulb |1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded In front of axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded In front of axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Near rear spring hanger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg under bonnet area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassle leg (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded os inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out leg corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded osr chassis out leg corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded main chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush most rear |2.4.G.2| | 1 |
| Brake servo defective or ineffective leaking air when predal depressed |1.1.10 |a| |i|| | 1 |
| Offside Track rod end damaged and unserviceable |2.2.C.1d| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side step and inner cill close to sub mount erea (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mount area (6.1.1 (c) (i)) | 1 |
| Offside Body has a sharp edge caused by damage mirror cover |6.1.C.1| | 1 |
| Offside coil spring broken |2.4.C.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis/Outrigger various |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis various |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Panal |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Outer sill under sliding door |6.1.C.1| | 1 |
| Nearside Front Fuel cap/sealing device missing |6.1.3 |b| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn marked in yellow |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side of chassis behind wheel marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area inner face |2.4.A.3| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Box section. (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inside engine bay. (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm pin or bush likely to become detached rear bush |5.3.4 |a| |ii|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front to rear |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front to rear |5.3.6 |a| |i|| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front to rear |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front to rear |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner wheel arches |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner wheel archs |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both side floors |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-roll bar fractured nsf side snapped |2.4.G.1| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting stepsill (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front of wheel arch |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CORROSION ON ALL ASPECTS OF CHASSIS |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded behind spring |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill inner outer |7.1.1 |a| |i|| | 1 |
| Brake warning device not illuminated or visible from the drivers seat in darkness |3.3.E.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shock mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger mounting |2.4.A.3| | 1 |
| Offside Front brake caliper inappropriately repaired |3.5.1n| | 1 |
| Nearside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner arch |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded hole |2.4.A.3| | 1 |
| All position lamps not working side marker lights |1.1.A.3b| | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached to ARB (5.3.3 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panal (6.1.1 (c) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine and black |7.4.B.3b| | 1 |
| Exhaust emissions exceed manufacturers specified limit 4.1 vs 1.19 max (8.2.2.2 (a)) | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement x2 |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush at arb |2.4.G.2| | 1 |
| Offside Inner Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear reflector not in good working order |function impaired| |1.4.2b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing (7.1.1 (a) (i)) | 1 |
| Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 1 |
| Retractable step not operating correctly |9.7 |b|| | 1 |
| Nearside Retractable step not operating correctly |9.7 |b|| | 1 |
| Rear Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength REAR (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded end sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed next to leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis holed behind rear shackle mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis holrd behind rear shackle mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis holed above rear axle (5.3.6 (a) (i)) | 1 |
| Offside Outer Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Outer Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Seat belt retracting mechanism defective 3rd row inner belt |5.2.5b| | 1 |
| Rear Leaf spring main leaf fractured both sides eyes broken (5.3.1 (b) (ii)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in 2places (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in 2places /outer sill (6.2.2 (d) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked areas x 6 |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded on sub chassis (6.1.1 (c) (i)) | 1 |
| Nearside Emergency exit door cannot be opened from inside the vehicle sliding |6.2.D.1a| | 1 |
| Nearside Emergency exit door cannot be opened from outside the vehicle sliding |6.2.D.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill+ floor pan x2 holes |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded outer sill.
rear seats fitted |5.2.6| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
| Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Front Exhaust has a major leak of exhaust gases recheck emissions at retest |7.1.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bodymounting |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bodymounting |6.1.B.2| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 1 |
| Front Hand operated control valve excessively corroded |3.2.1a| | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated Support bearing (6.1.7 (d) (i)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp fog lamp |1.1.A.3f| | 1 |
| Speed limiter not fitted |6.5.B.1| | 1 |
| Nearside Obligatory mirror seriously deteriorated affecting the rear view |6.6.1b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer edge,side of bumpstop mounting (6.1.1 (c) (i)) | 1 |
| Seat belt anchorage prescribed area is cracked |5.1.B.7| | 1 |
| Offside Front Body has a sharp edge caused by damage headlamp broken and sharp |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel well |2.4.A.3| | 1 |
| Nearside Front suspension locking device ineffective |2.5.A.4| | 1 |
| Rear Body has a sharp edge caused by damage bumper |6.1.C.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under arch/inner wing |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases rear section (6.1.2 (a)) | 1 |
| Exhaust system insecure rear section bracket broken (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area has two large holes within 30 cm from a mounting point (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced marked with chalk (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced marked with chalk (7.1.1 (a) (i)) | 1 |
| Fuel cap/sealing device ineffective temp fuel cap fitted (6.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Not a complete seem weld and material not adequate |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Not a complete seem weld and material not adequate |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength to inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear most spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 1 |
| Fuel cap/sealing device ineffective Can not test no key |6.1.3 |b| |i|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded 3rd row back. inner wheel arch area |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded 3rd row back. inner wheel arch area |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering centre inner sill |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering centre inner sill |6.1.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch and floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch and floor |7.1.1 |a| |i|| | 1 |
| Fuel pipe insecure at side of tank (6.1.3 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both rear spring rear mounts (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger hold (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step hold (5.3.6 (a) (ii)) | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn both front drop links (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill hold (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill hold (5.3.6 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer (7.1.1 (a) (i)) | 1 |
| Emissions not tested due to lack of engine oil |7.3.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger rotten and holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear outrigger holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger rotten and holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outrigger rotten and holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear panel |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front chassis at bumper |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at gearbox mounting |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded seat base |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear most |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded front most |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded rear most |2.4.A.3| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp Interacting with all other lights |1.2.1f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill by outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear off leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring inner chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Seat belt anchorage likely to become detached in the event of a collision wheel arch |7.1.1 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage likely to become detached in the event of a collision inner wheel arch |7.1.1 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rearward (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r inner sill |2.4.A.3| | 1 |
| Other passenger door cannot be opened from outside the vehicle n/s sliding door (6.2.3 (a)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp when indicator on (4.2.3 (c)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS BEHIND ROADWHEEL (5.3.6 (a) (i)) | 1 |
| Offside Rear Statutory seat belt missing 2nd row buckle missing |5.1.1| | 1 |
| Nearside Rear Seat belt retracting mechanism defective 4th row belt wont retract |5.2.5b| | 1 |
| Nearside Rear Statutory seat belt missing 4th row buckle missing |5.1.1| | 1 |
| Nearside Rear Seat belt retracting mechanism defective 5th row belt jammed |5.2.5b| | 1 |
| Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. passenger entrance |6.1.E.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect beam incorrect |1.8.A.1b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Seat belt likely to become detached in the event of a collision stalk and bolt missing |7.1.1 |a| |ii|| | 1 |
| Offside Rear Seat belt likely to become detached in the event of a collision stalk and bolt missing |7.1.1 |a| |ii|| | 1 |
| Stop lamp(s) adversely affected by the operation of another lamp all rear (4.3.3 (b)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp all rear lights same intensity as side lights (4.2.3 (c)) | 1 |
| Nearside Front Position lamp adversely affected by the operation of another lamp working with brake lights (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and surrounding areas on outter in rear wing and box section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner x member by spring hanger (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg above rear axle (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Ball joint has excessive play Rack joint |2.2.B.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Leaf Spring Mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front & Rear Leaf Spring Mountings (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber area. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring area. |5.3.6 |a| |i|| | 1 |
| Nearside Entrance/exit step anti-slip provision deteriorated to the extent that it is likely to be a trip hazard or cause injury. side door step corroded under plastic trim seen from underside of vehicle |6.1.E.1| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Rail Above Axle Nearside and Offside (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross reinforcement before Wheel (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross reinforcement After Wheel Nearside and Offside and Between Chassis Rails (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill Nearside and Offside (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake lagging in operation Scrapping/Grinding Noise on Application (1.2.1 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine mount inner arch and Engine bay (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Hydraulic fluid leaking excessively |8.4.1 |a| |i|| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded FLOOR PAN |5.2.6| | 1 |
| Nearside Outer Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mtg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mtg |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mtg |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mtg |5.3.6 |a| |i|| | 1 |
| Offside Front Brake pipe inadequately clipped could foul on alternator |3.6.B.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded n/s/r chassis leg brake compensator mount |3.6.C.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill chalked area |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer chalked area |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing |6.2.2 |d| |i|| | 1 |
| Nearside Front Torque/reaction arm has a deteriorated rubber bush resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Torque/reaction arm has a deteriorated rubber bush resulting in excessive movement |2.4.G.2| | 1 |
| Rear Outline marker lamp missing both |4.2.1 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer side of chassis corroded within 30cm of subframe mounting (5.3.6 (a) (i)) | 1 |
| Centre Front Upper Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor at footwell |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body is excessively holed &coroded and isecure |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings light panel excessively holed&coroded |6.1.B.2| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |anchor| front spring eye bush has excess play |2.4.B.4| | 1 |
| Offside Rear Leaf spring has excessive side play at eye |shackle| front spring eye bush ha excess play |2.4.B.4| | 1 |
| Brake pipe inadequately clipped both front to rear brake pies |3.6.B.1| | 1 |
| Rear Additional braking device insecure Load Sensing Valve seized |3.6.I.1| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded and outer sills |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o s and n s inner door steps sill |5.2.6| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion fibre glass repair |6.1.C.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected side chassis |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected side chassis |5.3.6 |a| |ii|| | 1 |
| Rear Rear fog lamp lens defective such that emitted light is adversely affected white light to rear (4.5.1 (b) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill step (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure bracket broken (6.1.3 (a) (i)) | 1 |
| Fuel system component leaking Fuel filter (6.1.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wheel arch area (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wheel arch area (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis offside rear of cab area (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL X2 LOCATIONS (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn "D" (5.3.4 (a) (i)) | 1 |
| Nearside Rear Braking system leaking around drum brake |3.6.A.1| | 1 |
| Offside Rear Brake cable has restricted free movement fouling leaf spring |3.5.1k| | 1 |
| Bonnet retaining device ineffective wont open |8.4.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step sill area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to chassis area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper floor to inner arch area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper floor to inner arch area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to chassis area (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of sill area x2 |6.2.2 |d| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury wing/arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected above front subframe mounting (5.3.6 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre cross member |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central sill has excessive corrosion |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret inner (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded top chassis leg (1.1.21 (e) (i)) | 1 |
| Front Fuel system component leaking engine area (6.1.3 (b) (i)) | 1 |
| Offside Front Brake pipe likely to become detached or damaged chafing front crossmember due to inadequate clipping (1.1.11 (d) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Three sections (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake load sensing valve inoperative but ABS functioning (1.1.17 (c) (i)) | 1 |
| Nearside Front position lamp|s| not working roof light |1.1.A.3b| | 1 |
| Brake pipe inadequately clipped main brake pipes insecure |3.6.B.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre crossmember corroded to excess |3.1.9| | 1 |
| Rear Anti-roll bar linkage has excessive play in a ball joint both |2.4.G.2| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both d bushes |2.4.G.2| | 1 |
| Front Front suspension has excessive movement at a wishbone pin or bush both rear bushes |2.5.A.1c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner chassis and wing |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill under sliding door holed and corroded all along |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill welding has come away |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of wheel chassis holed |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to flooring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis holed and corroded by load sensor |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis / sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis/sill inner panel floor mount gone |2.4.A.3| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rotted and holed |6.1.1 |c| |i|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both side `D` Bushes |5.3.4 |a| |i|| | 1 |
| Rear Body insecure both side wheel arches |6.2.2 |a| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flat bed |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flat bed |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flat bed securing brackets |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flat bed securing brackets |6.1.B.2| | 1 |
| Nearside Leaf spring saddle is fractured |2.4.B.7a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle handle missing |6.2.B.1b| | 1 |
| Front Trikes, quads or pre-68 vehicles, service brake imbalanced across an axle |3.7.D.2c| | 1 |
| Central Statutory seat belt missing catch |5.1.1| | 1 |
| Offside Front Upper Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Rear wheel bearing rough when rotated unable to check due to brake bind |2.6.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under body fron to rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded no of places |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded main chassis by brake comp corroded on wellded plates |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured main chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wing + inner wing in no of places |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded under wing no of places |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded under wings n/s+o/s by shockabsorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outter 1/4 panal by main rear chassis |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill / step area |5.2.6| | 1 |
| Rear Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Rear Lower Anti-roll bar locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Track rod end ball joint has excessive play and boot deteriorated |2.2.B.1f| | 1 |
| Nearside Headlamp aim not tested IMAGE INCORECT |1.8.A.1c| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded engine bay panel near macpherson strut top mounting behind wheel |2.4.A.3| | 1 |
| Brake pedal anti-slip provision incomplete pedal rubber worn through |3.3.A.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear chassis outriggers near leaf spring mountings |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear outriggers near leaf spring mountings |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing/wheel arch to floor area near shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ouuter sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outter sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor (above leaf spring) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis above bump stop (5.3.6 (a) (i)) | 1 |
| Electrical wiring insecure under front cross member |1.9.2a| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring anchor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor 2 places |2.4.A.3| | 1 |
| Nearside Lower Front suspension has excessive play in a lower suspension ball joint swivel |2.5.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear (5.3.6 (a) (i)) | 1 |
| Rear Seat belt retracting mechanism defective TWO belts on nearside second to rear seat |5.2.5b| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle inside or out |6.2.B.1c| | 1 |
| Offside Rear Seat belt retracting mechanism defective fourth row outer |7.1.2 |e|| | 1 |
| Nearside Rear Other passenger door cannot be opened from outside the vehicle handle broken. |6.2.3 |a|| | 1 |
| Nearside Rear Seat belt retracting mechanism defective both inner and outer seat |5.2.5b| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail above rear axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail above rear axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch/floor |6.2.2 |d| |i|| | 1 |
| Brake performance not tested couldn`t complete due to severe imbalance |1.2.1 |g|| | 1 |
| Offside Passenger`s seat insecure both twin seat s to floor |6.2.A.1| | 1 |
| Nearside Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. sliding door inside |6.1.E.1| | 1 |
| Nearside Body has a projection caused by damage fuel cap |6.1.C.1| | 1 |
| passenger door cannot be opened from outside the vehicle sliding |6.2.B.1c| | 1 |
| Offside Front Outer Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step Area |6.2.2 |d| |i|| | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn excess movement |5.3.4 |a| |i|| | 1 |
| Nearside Rear Front wheel bearing feels rough when rotated |2.5.A.2| | 1 |
| Offside Rear Front wheel bearing feels rough when rotated |2.5.A.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear crossmember |5.3.6 |a| |i|| | 1 |
| Floor in such a condition it is likely to cause injury rear interior floor |6.2.4 |a| |ii|| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light lense cracked |1.2.1e| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded floor
|2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Drivers footstep, inner seam. |7.1.1 |a| |i|| | 1 |
| Steering rack has excessive free play detected at the steering wheel |steering rack fitted| lower steering bush |2.3 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Behind cab - corrosion to rear (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step right at very top (7.1.1 (a) (i)) | 1 |
| Headlamp has a product on the light source so that the light output is severely reduced both |1.7.5a| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Outer Front Track rod end ball joint has excessive play (2.2.B.1f) | 1 |
| Front brake disc excessively pitted (3.5.1h) | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured (2.4.A.3) | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured (2.4.A.3) | 1 |
| rear brakes release unevenly (3.7.B.4) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount floor area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis above spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis above spring |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch 2 areas |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill holed. |5.2.6| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure u bolts loose |2.4.B.7b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring, front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring, rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring, front mount |2.4.A.3| | 1 |
| Offside Body component damaged and likely to cause injury mirror sharp edge (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring mountings (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, by bump stop (5.3.6 (a) (i)) | 1 |
| Front position lamp|s| not working both sides lights |1.1.A.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis above axle near shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill area x3 |5.2.6| | 1 |
| Nearside Front Body panel corroded and likely to cause injury at wing and wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury at wing and wheel arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner and outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner and outer sill and floor (6.1.1 (c) (i)) | 1 |
| Brake pedal anti-slip provision worn smooth brake pedal rubber partially but has also worn a hole straight to the metal pedal (1.1.2 (c)) | 1 |
| Brake performance not tested corroded pipe |1.2.1 |g|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected around brake compensator holed |5.3.6 |a| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside rear chassis holed |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside rear inner sill holed |5.3.6 |a| |i|| | 1 |
| Nearside Parking brake inoperative on one side much lower performance |1.4.1 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring crossmember holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring crossmember holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis holed behind wheel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis holed around brake compansator (1.1.21 (e) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded chassis holed |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis holed |5.2.6| | 1 |
| Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis holed |3.6.C.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis holed |3.6.C.3| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded chassic holed |2.2.C.1h| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded around brake compsator |3.3.A.2| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded brake compensator (1.1.21 (e) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed (6.1.1 (c) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring front mounting holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring front mounting holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring rear mounting holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring mounting holed (5.3.6 (a) (i)) | 1 |
| Offside Front Exhaust has a part missing |7.1.1a| | 1 |
| Offside Front Lower Trailing arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill area |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area MARKED |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area MARKED |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of the spring area MARKED inner sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area Marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By spring mounting Marked area |5.3.6 |a| |i|| | 1 |
| Front Oil leaking excessively from engine Back of the engine |8.4.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring inner sill area MARKED |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring, sill / inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring, inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock, chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of spring, sill |2.4.A.3| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to front of o/s engine mounting under bonnet |6.1.B.2| | 1 |
| Front Subframe mounting prescribed area is excessively corroded front both sides, top of chassis |under bonnet left and right at rear. bottom of chassis o/s |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring around hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock, chassis |outer behind wheel| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around hanger / inner sill |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine bay by water bottle |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger holed |6.1.B.2| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step holed |6.1.B.2| | 1 |
| Nearside Front Brake pipe seriously damaged |found during steering lock to lock check| flexi |2.2.D.2b| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg | fuel tank | |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg | seat area | |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger | front leaf spring mount | |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger | rear leaf spring mount | |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner quarter panel by rear spring rear mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis by rear shock top mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis by rear shock top mounting area |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / seat mount (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side ,by front wheel. |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above front wheel |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x3 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis to floor |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underarch |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings chassis under wheelarch |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis |6.6.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting Cross member |6.6.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Body sill |2.4.A.3| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x5 |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill door step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hangar |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded seal |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill x 3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength arch x 2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength out rigger |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength middle sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Front Lower Cab steps in such a condition that it is likely to cause injury |6.2.8 |b|| | 1 |
| Suspension component mounting prescribed area is excessively corroded OS & NS OUTRIGGERS BY REAR SPRING MOUNTS |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded REAR CHASSIS BY TOW BAR MOUNTING |2.4.A.3| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded NSR CHASSIS BY BRAKE LIMIT VALVE |3.6.C.3| | 1 |
| Exhaust has a major leak of exhaust gases at silencers
|7.1.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at fuel tank |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring, rear cross member area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring, rear cross member area (5.3.6 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion both outer sills. |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheelarch/floorpan holed |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill panel/step holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill panel/step |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by shock absorber |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded innersill |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases both silencers |7.1.2| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill and door step |5.2.6| | 1 |
| Offside Rear Braking system leaking leakage drum backplate |3.6.A.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, front leaf mount |5.3.6 |a| |i|| | 1 |
| Nearside Outer Body panel corroded and likely to cause injury Sill multiple (6.2.1 (a) (i)) | 1 |
| Offside Outer Body panel corroded and likely to cause injury Sill multiple (6.2.1 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Between spring mountings (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Between spring mountings (6.1.1 (c) (i)) | 1 |
| Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside and offside - A post reinforcement area (6.1.1 (c) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside - chassis (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside - crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired shocker mounting/inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front hanger |2.4.A.3| | 1 |
| Rear Passenger`s seat insecure also in my opinion inadequately secured |6.2.A.1| | 1 |
| Exhaust emissions exceed manufacturers specified limit plate limit 1.19% (8.2.2.2 (a)) | 1 |
| Nearside Body component damaged and likely to cause injury mirrors (6.2.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded and holed at fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Position lamp not working side light |4.2.1 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed. |7.1.1 |a| |i|| | 1 |
| Emissions not tested excessive smoke, |8.2.2.2 |e|| | 1 |
| Offside Rear Rear position lamp|s| not working side light |1.1.A.3b| | 1 |
| Prop shaft bearing excessively worn Frontmost bearing (6.1.7 (b) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired Siezed/not moving (1.1.17 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill/step areas |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner/outer sill areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner/outer sill areas |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/wheel arch areas |2.4.A.3| | 1 |
| Offside Front Outer Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis above leaf spring shackle (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Next to leaf spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Next to leaf spring front hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch. |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded foward |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded foward |2.4.A.3| | 1 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached front bush is missing (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Sill repaired with spray foam (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Sill repaired with spray foam (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Various holes in inner sills, floors, and chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Varios holes in sinner sills, floor and chassis. Separation in wheel arch seam. (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front, in step (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near rear spring hanger (6.1.1 (c) (i)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect N/s & O/s (4.1.2 (c)) | 1 |
| Nearside Rear Body panel insecure Sill insecure (6.2.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded step / sill |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill/step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of spring panel |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR CROSSMEMBER BOX SECTION HOLED |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings HOLES IN INNER CILL AREA |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings HOLE IN CHASSIS LEG |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings HOLES UNDER SEAT AND BATTERY AREA |6.1.B.2| | 1 |
| Rear Brake linkage has restricted free movement COMPENSATOR SIEZED |3.5.1k| | 1 |
| Nearside Front position lamp|s| not working SIDELIGHT |1.1.A.3b| | 1 |
| Fuel system component leaking in engine bay above starter |7.2.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ADJ TO SUBFRAME MOUNTING |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases FRONT BOX CRACKED |7.1.2| | 1 |
| Nearside Lower Fuel hose leaking |7.2.3| | 1 |
| Offside Front Lower Axle swivel joint has excessive play in a ball joint |2.5.A.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded several places
|2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner outer sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner outer sill |5.2.6| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Central & Front sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Central (6.1.1 (c) (i)) | 1 |
| Offside Front Brake prescribed area is excessively corroded inner wheel arch (1.1.21 (e) (i)) | 1 |
| Oil leaking excessively from engine engine oil (8.4.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock/ Leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL & WHEEL ARCH |AROUND LEAF SPRING MOUNTINGS |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AROUND LEAF SPRING MOUNTING |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER & WHEEL ARCH AROUND LEAF SPRING MOUNTINGS |6.1.B.2| | 1 |
| Fuel system component leaking FRONT AREA |7.2.3| | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn rear spring bush worn. (5.3.4 (a) (i)) | 1 |
| Prop shaft bearing excessively worn x 2 |6.1.7 |b| |i|| | 1 |
| Body panel likely to become detached tipper bed panel hanging off |6.2.1 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x1 (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking FUEL PUMP |7.2.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp and offside tail |1.4.A.2h| | 1 |
| Centre Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Bonnet retaining device ineffective Bonnet catch will not open |8.4.2| | 1 |
| Electrical wiring insecure Wires fowling pedals |1.9.2a| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp Reversing light is on all the time, showing white light. |1.1.A.3f| | 1 |
| Headlamp aim beam image obviously incorrect Non matching headlight bulbs fitted, one led and one standard |1.8.A.1b| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Rear of outer sill. |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Rear of outer sill. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Box sections infront & behind leaf spring mounting points. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Box sections infront & behind leaf spring mounting points. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Floor. |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Quarter panel. |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Under sill. |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Under sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Box section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis. |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Undersill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Chassis. |2.4.A.3| | 1 |
| Rear Parking brake lever insecure |3.1.3b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength middle crossmember |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded middle crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front inner sill holed 30cms from spring mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing holed 30cms from strut mounting |2.4.A.3| | 1 |
| Centre Brake pipe excessively chafed front to rear pipes insecure |3.6.B.2c| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is inadequately repaired brake pressure regulator chassis mounting plate not continuously welded |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body 30cms from mounting |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill holed 30cms from seat belt mounting |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body holed 30cms from spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis plate not continuously welded |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine Unable to supply print out. Machine head clogged with soot from excessive black smoke |7.4.B.3b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Under lamp unit |6.1.C.1| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion Wheel arch area |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion Wing and wheel arch area |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Font hanger various areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear hanger various areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear hanger various areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber top mount various areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber top mount various areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Shock absorber top mount inner wheel arch area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Shock absorber top mount inner wheel arch area |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Inner wheel arch |3.6.C.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front middle rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front middle rear in chassie |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor/step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front outrigger x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear outrigger x4 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Box section |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Member |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Member |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Member |2.4.A.3| | 1 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded Member |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill under door step |2.4.A.3| | 1 |
| Leaf spring to axle securing bolt missing |2.4.B.7b| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by rear wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of rear spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of rear spring hanger (6.2.2 (d) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side inner wheel arches rotted |6.1.B.2| | 1 |
| Front Suspension arm has excessive play in a pin/bush both side wishbone bushes |2.4.G.2| | 1 |
| Central Rear Prop shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mount |2.4.A.3| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened rear spring hanger |5.3.1 |b| |i|| | 1 |
| Nearside Rear Hydraulic fluid leaking excessively brake |8.4.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured Front spring eye...broken... (5.3.1 (b) (ii)) | 1 |
| Offside Front Steering locking device ineffective Track rod end locking nut loose.... (2.1.3 (d)) | 1 |
| Offside Rear Parking brake inoperative on one side Low reading.... (1.4.1 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis outrigger badly holed and corroded near rear leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis outrigger badly holed and corroded near rear leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis badly holed above rear axle |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Front and rear outer sill holed and broken |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing corroded and holed round top shock absorber mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing corroded and holed near top shock absorber mount |2.4.A.3| | 1 |
| Fuel pipe excessively damaged |7.2.2| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill,marked in yellow |5.2.6| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill,marked in yellow |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement inner |2.4.G.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis section |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting,chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting,chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting,outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body by spring |6.1.B.2| | 1 |
| Offside Rear Direction indicators obviously incorrectly positioned |1.4.A.2b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on chassis rail close to back wheel and brake pipes |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded by door step |5.2.6| | 1 |
| Rear Brake valve leaking such that brake functionality is affected |1.1.7 |d| |ii|| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting Rear panel x3 |6.6.6| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp when indicator applied (4.2.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger shock mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger front spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired out rigger rear spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger front spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger rear spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Rear reflector excessively damaged so that its function is impaired lens damaged |1.5.1c| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear wishbone bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear sill |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion Rear step |6.1.C.1| | 1 |
| Offside Position lamp adversely affected by the operation of another lamp stop and side transposed (4.2.3 (c)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle mount area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Outer Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings o/s rear excessive corrosion |6.1.B.2| | 1 |
| Offside Rear Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer sill and under floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under floor |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases rear silencer |6.1.2 |a|| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush inner rear arm bush worn. |2.4.G.2| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded.3 places. |6.1.B.2| | 1 |
| Upper Fluid leak harmful to the environment or a risk to other road users Fuel Leaking Engine (8.4.1 (a) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured At Front Mount (5.3.1 (b) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper Spring Mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front Step (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front Step (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis in Engine Bay (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Middle box |7.1.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Middle row |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Middle row |5.2.6| | 1 |
| Rear Body has a sharp edge caused by corrosion Both arches |6.1.C.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both outer sills and rear arches |2.4.A.3| | 1 |
| Nearside Outer Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch suspension coroded |2.4.A.3| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure all U |2.4.B.7b| | 1 |
| Nearside Rear Leaf spring to axle securing bolt insecure all U |2.4.B.7b| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front of rear spring |5.3.6 |a| |ii|| | 1 |
| Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/floor/step area |6.1.B.2| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting MARKED IN YELLOW |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting MARKED IN YELLOW |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting MARKED IN YELLOW |6.2.2 |d| |i|| | 1 |
| Rear Window in an unacceptable condition BROKE AND LOOSE |3.2 |c| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s chassi |6.1.B.2| | 1 |
| Nearside Rear Shock absorber insecure lower bolt loose |2.7.2b| | 1 |
| Nearside Front Direction indicator not working side (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working side (4.4.1 (a) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage missing nut missing |2.4.G.1| | 1 |
| Offside Rear Lower Anti-roll bar linkage insecure securing nut loose |2.4.G.1| | 1 |
| Fuel tank insecure rear tank strap heavily corroded |7.2.1| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means unable to inspect properly will not open |7.2.4b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg above axle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg above axle |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded near shocker mount |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg in engine bay |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outer rigger leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel by rear leaf hanger |5.3.6 |a| |i|| | 1 |
| Seat belt damaged sufficient to significantly weakened the webbing drivers |5.2.2a| | 1 |
| Offside Rear Leaf spring cracked around front bush |2.4.B.1a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear crossmember centre |2.4.A.3| | 1 |
| Headlamp not working on main beam O/S Main beam |1.7.5a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both inner and outer sills |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced DOORSTEP |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH |5.3.6 |a| |i|| | 1 |
| Inner Rear Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 1 |
| Offside Rear Direction indicator incomplete |1.5.1b| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength When arch/sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured Inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Ball joint has excessive play rack end |2.2.B.1f| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner step /sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In multiple places, chassis, inner wheel arch, inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In multiple places, outer sill, inner sill, chassis, inner wheel arch |5.3.6 |a| |i|| | 1 |
| Centre Statutory seat belt missing |5.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both springs mountings |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor inner arch with in 30cm of shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch with in 30cm rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch with in 30cm of front spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer cill with in 30cm of spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill rusted within 30cm seat belt mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with in 30cm of seat mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch with in 30cm of subframe mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg with in 30cm of subframe mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step with 30cm of seat mount |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Power steering pipe/hose leaking at rack |2.1.5 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back leaf spring hanger bracket (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back leaf spring hanger bracket (5.3.6 (a) (i)) | 1 |
| Nearside Outer Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) TRACK ROD END WORN (2.3 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Lower Drivers door hinge insecure corroded (6.2.3 (c) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear most mounting on chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear most mounting on chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind strut (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring mounting point (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure mounting torn (6.1.2 (a)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and step (7.1.1 (a) (i)) | 1 |
| Nearside Front Anti-lock braking system component excessively damaged pickup ring |1.6 |e|| | 1 |
| Offside Rear fog lamp does not emit a steady red light Reverse light comes on when fog lamp switch operated. |4.5.4 |a|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring front mounting, corrosion within 30cm |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring fixing location corroded. |5.3.6 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced seal corroded within 30cm of seat belt mounting |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat bet mounting, corrosion within 30cm |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/ floor |2.4.A.3| | 1 |
| Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Front Speedometer cannot be illuminated. |6.7.3| | 1 |
| Stop lamp|s| not working 2x |4.3.1 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp flashing with indicators |1.1.A.3f| | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp affected by indicators |1.3.2f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill /outrigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear inner arch/floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner outer sills |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring outrigger support |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back of spring hanger to back panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength side of back outrigger to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger outrigger to sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength side of front spring hanger to floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outboard end of chassis next to shackle |6.2.2 |d| |i|| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush bush split |2.5.A.1c| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush bush spit |2.5.A.1c| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded front to rear sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded w/arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded w/arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner front to rear sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring. (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering under wheel arch area |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near top shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near top shock mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Wheel bearing has excessive play wheel moves in and out away from the diff (5.1.3 (a) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play wheel moves in and out away from the diff (5.1.3 (a) (i)) | 1 |
| Offside Rear Seat belt insecurely fixed to the vehicle structure |5.1.B.2a| | 1 |
| Direction indicators incorrect colour |1.5.1d| | 1 |
| Nearside Body has a sharp edge caused by damage mirror case |6.1.C.1| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing by frame mounting |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch by shocker top mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill x 2 |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill back |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill back/step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of suspension spring (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of suspension arm mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer door sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg and inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded panel/chassis outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded panel/chassis outrigger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner cill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |2 places| |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around step |6.1.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush nearside and offside inner bushes |2.4.G.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab step area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to doorstep area corroded (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to doorstep area corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Doorstep area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch area (5.3.6 (a) (i)) | 1 |
| Rear Floor excessively deteriorated Tipper floor corroded and holed. Various places (6.2.4 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced entire inner wing area (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced entire inner wing area (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut / inner wing area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut / inner wing area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill under B post (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor, under rubber mat |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner arch |5.3.6 |a| |i|| | 1 |
| Radius arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced seal (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area x2 places, 1 front 1 rear |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking diesel pump |7.2.3| | 1 |
| Front Upper Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear brake drum cracked |3.5.1h| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced foot step corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill by front spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill by spring hanger front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above rear spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/wheel arch area above axle (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis cross member corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & rear mark yellow |6.1.B.2| | 1 |
| Central Front Seat belt missing |7.1.2 |a|| | 1 |
| Offside Front Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills corroded through in several places |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail near shock absorber mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail near shock absorber mount |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor near shock absorber mounting |under wheel arch| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor near shock absorber mounting |under wheel arch| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mount rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mountx3 |2.4.A.3| | 1 |
| Nearside Rear Direction indicator incorrect colour damaged |4.4.3 |a|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner arch 30cm damper mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf string mount/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis axle securing u bolts |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour Light cluster damaged and showing white light to rear |1.1.A.3e| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D-bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D-bush |2.4.G.2| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp both lamps |1.1.A.3f| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings outer chassis |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab rear |6.1.B.2| | 1 |
| Centre Subframe mounting prescribed area is excessively corroded center crossmember |2.4.A.3| | 1 |
| Offside Front Electrical wiring insecure cab |1.9.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Cab floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded excess corrosion x3 holes [seat mount and seatbelt mounts] |5.2.6| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch / turret area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail above axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail above axle |6.2.2 |d| |i|| | 1 |
| Brake valve leaking rear compensator |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step/sill |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x3 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced chassis leg (6.1.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension area leaf spring mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting shock mounting area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner arch (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to shock behind rear wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring hanger area (6.1.1 (c) (i)) | 1 |
| Rear Fuel tank insecure fuel tank strap rusted off (6.1.3 (a) (i)) | 1 |
| Headlamp lens seriously defective Nearside and Offside (4.1.1 (b) (ii)) | 1 |
| Power steering component leaking Around rack area (2.1.5 (a)) | 1 |
| Prop shaft bearing excessively worn Both (6.1.7 (b) (i)) | 1 |
| Rear position lamp|s| incorrect colour nearside rear lamp lens missing |1.1.A.3e| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch X2 |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember X2 |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggor |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill X2 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill X2 |6.1.B.2| | 1 |
| Offside Rear position lamp|s| not working side marker light |1.1.A.3b| | 1 |
| Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement Rear subframe bush |2.4.G.2| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect not a steady pattern (4.1.2 (c)) | 1 |
| Offside Front Brake pipe excessively damaged coming out of front master cylinder (1.1.11 (c)) | 1 |
| Offside Front Brake pipe excessively damaged coming out of rear of master cylinder (1.1.11 (c)) | 1 |
| Nearside Front Brake pipe excessively damaged running down bulkhead (1.1.11 (c)) | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected (1.1.7 (d) (ii)) | 1 |
| Nearside Rear Leaf spring anchor bracket insecure to the extent that relative movement is visible nut missing (5.3.1 (a) (ii)) | 1 |
| Offside Rear Outer Anti-roll bar linkage insecure Lower linkage joint nut missing |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush Outer linkage lower bolt/nut missing |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe support area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp lens seriously defective INTERACTION |4.2.1 |b|| | 1 |
| Front position lamp|s| not working o/s/f sidelight |1.1.A.3b| | 1 |
| Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance n/s/f sidelight very dim |1.1.A.3d| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view n/s/f door mirror |8.1.2a| | 1 |
| Shock absorber has a serious fluid leak n/s/r |2.7.3| | 1 |
| brake disc in such a condition that it is seriously weakened o/s/f disc badly worn from pads on metal |NO BRAKE TEST DONE | due to this failure |3.5.1i| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone back bush |2.4.G.2| | 1 |
| Offside Front Wheel nut|s| missing has 1 x |4.2.A.1e| | 1 |
| Stop lamp|s| all not working both |4.3.1 |a| |iii|| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp pulsing with indicator on |1.1.A.3f| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc cv gaiter split |2.5.C.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger front of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger in front of wheel |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded floor |3.3.A.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings after rear wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings After rear wheel |6.1.B.2| | 1 |
| Nearside Rear Lower Loading door likely to open inadvertently or not remain closed CATCH NOT SECURING |6.2.3 |b| |ii|| | 1 |
| Fuel system component leaking excessively or a risk of fire ON TOP OF ENGINE |INJECTORS|? |6.1.3 |b| |ii|| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn REARMOST |5.3.4 |a| |i|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine NO PRINT OUT DUE TO CLOGGING METER |8.2.2.2 |b|| | 1 |
| Rear Upper Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Rear Lower Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Rear Direction indicator obscured more than 50% lens cracked and tapped over in gray tape |1.4.A.2d| | 1 |
| Offside Rear Rear reflector more than 50% obscured grey tape covering lens |1.5.1b| | 1 |
| Nearside Rear Rear reflector more than 50% obscured grey tape covering lens |1.5.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner seal area forward of front wheel marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner seal area behind rear wheel marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner seal area behind rear wheels marked in yellow |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Area between rear spring mounts under wheel arch marked in yellow |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WING (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER OUER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NEAR FUEL NECK / STEP (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings axle bump stop |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings axle bump stop |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ABOVE AXLE |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ABOVE AXLE |6.1.1 |c| |i|| | 1 |
| Stop lamp|s| all not working WHEN SIDE LIGHTS ON |4.3.1 |a| |iii|| | 1 |
| Offside Front Inner Body component corroded and likely to cause injury Underside Step support panel loose. (6.2.1 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 holes. (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 holes. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Tipper bed chassis corroded within mounting point and wheel arch mounting point (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis to spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger 2nd |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger 3rd |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step to chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to spring mount 2nd |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to spring mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch to chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis to suspension |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower corroded (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength side panel |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis legg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp tail light flashes at the same time |1.4.A.2h| | 1 |
| Vehicle Identification Number not permanently displayed dashboard plate half missing |6.3.5.a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to brake load valve |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to front subframe, rear mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil has hole in it near wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch has gone thought |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In sill and inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In sill (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting seal |6.2.2 |d| |i|| | 1 |
| Offside Front Window in an unacceptable condition |3.2 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill /door step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/door step (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cabin behind driver over the frame (6.2.2 (d) (i)) | 1 |
| Offside Front Window in an unacceptable condition (3.2 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Subframe mounting prescribed area is inadequately repaired behind cabin (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Hazard warning lamps inoperative on all nearside bulbs |1.4.B.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded above rear bump stop area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner area /floor area in 2 places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Fuel system component leaking around fuel pump area |7.2.3| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheelarch |5.2.6| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Drivers chassis leg |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger on inner sill |2.4.A.3| | 1 |
| Front Lower Suspension component mounting prescribed area is severely distorted chassis above tank |2.4.A.3| | 1 |
| Offside Rear Brake pipe excessively damaged Squashed. |1.1.11 |c|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outer rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail outer face (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail outer face (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outer rigger rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill step |5.2.6| | 1 |
| Subframe mounting prescribed area is excessively corroded Corrosion above front subframe, nearside front mounting |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded Front of OSF door step |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Crossmember between rear spring forward mountings, both sides |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded offside front inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt stitching incomplete |5.2.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearward leaf spring mount top of chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Ball joint has excessive play inner tie bar |2.2.B.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside - leaf spring area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front outrigger corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis behind road wheel |2.4.A.3| | 1 |
| Braking system leaking reservoir |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mount towards front |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has damage which adversely affects braking or steering chassis rail |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering inner wheelarch |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheelarch |6.1.A.1| | 1 |
| Nearside Outline marker lamp not working middle |4.2.1 |a|| | 1 |
| Nearside Rear Brake fluid contaminated |1.8 |a|| | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger cut |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front chassis - underside and leading into wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front chassis - above sub-frame |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings driver step - underside |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced innersill |7.1.1 |a| |i|| | 1 |
| Nearside Steering linkage likely to become detached Track rod end loose on tie rod end |2.1.3 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength engine bay area |5.3.6 |a| |i|| | 1 |
| Offside Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 1 |
| Offside Front Front position lamp|s| not working side |1.1.A.3b| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/step area |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded cabsteps |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear outriggers various places |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear chassis various places |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner arches/floors |2.4.A.3| | 1 |
| Offside Rear Brake cable has restricted free movement handbrake cable fouling wheel |3.5.1k| | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both sides |5.3.4 |a| |i|| | 1 |
| Outline marker lamp has a product on the lens or light source which significantly reduces light intensity both N/S and O/S (4.2.3 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outter sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x3 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced front step and sill |7.1.1 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides extensively corroded around spring mounts |2.4.A.3| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn second propshaft bearing |2.4.G.4d| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Exhaust emits excessive smoke or vapour of any colour smoke |7.4.B.4| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering next to rear rear hanger bush |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering nxt to rear rear spring hanger |6.1.A.1| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength step/wheel arch areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength complete wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength complete rear arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength complete inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Exhaust has a major leak of exhaust gases front section |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail / inner flitch |2.4.A.3| | 1 |
| Offside Direction indicators not working wing |1.4.A.2c| | 1 |
| Offside Hazard warning switch faulty indicators not working on hazard switch pressed |1.4.B.1d| | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member by rad |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel behind wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner panel behind wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is severely distorted chassis |2.4.A.3| | 1 |
| Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside & Offside arches (6.1.1 (c) (i)) | 1 |
| Nearside Front Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Brake performance not tested o/s/f brake locking on (1.2.1 (g)) | 1 |
| Nearside Rear Inner Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Inner Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened shackle bracket support |2.4.B.6d| | 1 |
| Nearside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Wheel bearing rough when rotated Nearside and Offside (5.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch X2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail by rear bump stop |6.1.1 |c| |i|| | 1 |
| Central Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger end areas |5.3.6 |a| |i|| | 1 |
| Fuel pipe leaking on engine (6.1.3 (b) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch to floor (7.1.1 (a) (i)) | 1 |
| Nearside Emergency exit sign missing |9.1.2 |b| |ii|| | 1 |
| Nearside Body has a sharp edge caused by damage mirror body |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill within 30cm of spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger within 30cm of spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear out rigger |5.3.6 |a| |i|| | 1 |
| Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OFFSIDE+NEARSIDE----- FLEACH (6.2.2 (d) (i)) | 1 |
| Offside Body has a sharp edge caused by damage mirror case |6.1.C.1| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all rear lights affected when nearside rear indicator operated |1.4.A.2h| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing corroded with sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Front Bumper insecure mounting point for bumper loose due to corrosion |6.1.4 |a| |i|| | 1 |
| Nearside Rear Brake hose damaged and likely to fail nsr, flexi brake hose split to cords |1.1.12 |a|| | 1 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt gaitor no longer preventing ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit tested to plate value |1.19| failed |8.2.2.2 |a|| | 1 |
| Rear Service brake effort inadequate at a wheel low effort and unable to lock out |1.2.1 |a| |i|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp when brake light is applied the indicator lights up the light is being shared because something inside the unit is broken/missing |1.4.A.2h| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded door step area where chalked |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill area where chalked |5.2.6| | 1 |
| Offside Rear Shock absorber has an excessively worn bush bottom shock bush |2.7.4| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor pan under drivers seat |5.2.6| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded where chalked |2.4.A.3| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded arch area where chalked |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded inner arch area two holes where chalked |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired behind drivers seat look from under vehicle area is larger that is corroded |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced B post fractured (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced B post fractured (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Cab under passenger seats. (7.1.1 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Above fuel tank. (1.1.21 (e) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate value 1.19 (8.2.2.2 (a)) | 1 |
| Offside Inner Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Outer Rear Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint prop shaft joint |2.4.G.4b| | 1 |
| Rear Torsion bar attachment bracket loose |2.4.E.4a| | 1 |
| Rear Anti-roll bar linkage worn and seriously weakened both |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing arch |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor sill |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor sill |6.1.1 |c| |ii|| | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member |6.1.1 |c| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Two cross sections closest to rear. (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill chalked area |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger area |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear floor pan area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Forward Area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rearward Area |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded McPherson Strut Area Under Wheel Arch |2.4.A.3| | 1 |
| Nearside Seat belt not functioning as intended Jammed in Top Guide (7.1.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring Hanger Area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring Hanger Area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Rear Wheel Arches (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Rear Wheel Arches (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which shows white light to the rear damaged (4.2.3 (b) (ii)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced x member x2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside arch x3 (5.3.6 (a) (i)) | 1 |
| Offside Dropside component insecure (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded rear of cab |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected leaf spring hanger mount |5.3.6 |a| |ii|| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Lower Body has a sharp edge caused by corrosion wheelarch |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hole in |6.1.B.2| | 1 |
| Offside Rear fog lamp emits a light other than red LAMP CRACKED SHOWING WHITE LIGHT |1.3.2e| | 1 |
| Nearside Rear reflector excessively damaged so that its function is impaired BADLY BROKEN AND MISSING FROM LAMP |1.5.1c| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt GAITER SPLIT |2.4.G.2| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement FRONT END OF REAR SPRING BUSH WORN SPRING RUBBING METAL ON METAL ON MOUNTING |2.4.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS BEHIND REAR WHEEL /FLOOR AREA /INNER ARCH WITHIN 30CM OF SHOCK MOUNT |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle and anchor |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded anchor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with chalk |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength marked with chalk |5.3.6 |a| |i|| | 1 |
| Offside Lower Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing in several places |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower sill in several -places |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing in several places |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section and outrigger nearspring hanger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rust holes where floor meets inner wheelarch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rust holes where floor meets inner wheelarch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel holed as indicated with chalk |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel holed as indicated with chalk |5.3.6 |a| |i|| | 1 |
| Nearside Rear Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch holed |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately clipped pipe insecure |3.6.B.1| | 1 |
| Front Body has a projection caused by corrosion bumper loose |6.1.C.1| | 1 |
| Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt and play (2.1.3 (g) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut tower area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/arch area |2.4.A.3| | 1 |
| Nearside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side sills |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f floor area to inner sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r inner wheel arch complete multiple places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r inner arch holed and distorted |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r outter to inner wheel arch holed multiple places |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint hub |2.4.G.2| | 1 |
| Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear fog lamp light intensity significantly reduced |4.5.4 |a|| | 1 |
| Nearside Front Fuel system component leaking excessively or a risk of fire engine bay looks like filter (6.1.3 (b) (ii)) | 1 |
| Offside Rear Upper Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Shock absorbers damaged to the extent that it does not function no damping action |5.3.2 |b|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced excessive corrosion hole in wheel arch adjacent to seat mounting,seat belt fitted to seat. |7.1.1 |a| |i|| | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction sticker in centre of drivers view (3.1 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion hole in wheel arch adjacent to seat mounting,seat belt fitted to seat. (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sills |5.2.6| | 1 |
| Offside Rear Leaf spring fractured leaf missing |2.4.B.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 30cm from spring mount (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 30cm from spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Seat belt likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis strengthening plate (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis strengthening plate (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal |6.1.1 |c| |i|| | 1 |
| Offside Front front brakes release unevenly SLOW |3.7.B.4| | 1 |
| Offside Front front brakes release unevenly Very Slow!!! |3.7.B.4| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor/chassis broken away |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturers specified limit Limit is 0.75 (8.2.2.2 (a)) | 1 |
| Nearside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both sides fornt wheel arch |6.2.2 |d| |i|| | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch both sides |6.2.2 |d| |i|| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step iner |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sil (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split badly (5.3.4 (b) (ii)) | 1 |
| Brake load sensing valve linkage defective and function impaired linkage seized (1.1.17 (a)) | 1 |
| Rear Lower Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Front Headlamp levelling device inoperative both (4.1.5 (a)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under step (6.1.1 (c) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (front leaf spring mount) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (rear leaf spring mount) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (rear leaf spring mount) (5.3.6 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step area |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill not welded to outer sill |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch |7.1.1 |a| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch behind suspension leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn roll bar link bush |5.3.4 |a| |i|| | 1 |
| Offside Position lamp not working foremost side. |4.2.1 |a|| | 1 |
| Brake pipe inadequately supported Front to rear |3.6.B.1| | 1 |
| Offside Rear Brake pipe inadequately supported across axle |3.6.B.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step on underside |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step on underside |6.1.B.2| | 1 |
| Rear Stop lamp not working when side lights are on |1.2.1b| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member |6.6.6| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER AND OUTER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER INNER PANEL (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER INNER PANEL (6.1.1 (c) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger at spring eye |6.1.B.2| | 1 |
| Nearside Rear Tie bar/rod which is adjustable, locking device missing |2.4.G.1| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush bolt loose |2.4.G.2| | 1 |
| Offside Rear Leaf spring fractured SPRING END FRONT MOUNT FRACTURED. (5.3.1 (b) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength TOP SHOCK ASORBER MOUNTING AREA CHASSIS. (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded cross member at spare wheel |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded lower door step |5.2.6| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis at load sensing valve |3.1.9| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both sides lower door step |5.2.6| | 1 |
| Engine MIL inoperative or indicates a malfunction light on dash (8.2.2.2 (g)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt dust cover split (5.3.4 (b) (ii)) | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached insecure (5.3.4 (a) (ii)) | 1 |
| Offside Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Anti-roll bar fractured (5.3.3 (b) (ii)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear by towbar |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner of wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear wishbone bush |2.5.A.1c| | 1 |
| Offside Inner Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember where cables attach |3.1.9| | 1 |
| Nearside Rear Leaf spring anchor pin excessively loose in its bracket bolt |2.4.B.3a| | 1 |
| Offside Rear Leaf spring anchor pin excessively loose in its bracket bolt |2.4.B.3a| | 1 |
| Rear Stop lamp not working all 3 lights |1.2.1b| | 1 |
| Nearside Outer Front Brake pipe leaking |3.6.A.1| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view door mirror glass |8.1.2a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail. front mounting bolt |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill panel |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both lamps with hazard lamps |1.1.A.3f| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Exhaust system not adequately supported center clamp missing |7.1.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill corroded |5.2.6| | 1 |
| Offside Front Position lamp not working side (4.2.1 (a) (ii)) | 1 |
| brake disc modified and seriously weakened front |3.5.1n| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wing (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill step |5.2.6| | 1 |
| Nearside All position lamps not working side-marker |1.1.A.3b| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush D-BUSH |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D-BUSH |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D-BUSH |2.4.G.2| | 1 |
| Offside Position lamp not working top marker and side marker |4.2.1 |a|| | 1 |
| Nearside Position lamp not working side marker |4.2.1 |a|| | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
| Dropside corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Anti-roll bar ball joint excessively worn both front (5.3.4 (a) (i)) | 1 |
| Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in two places (5.3.6 (a) (i)) | 1 |
| Front Brake pipe excessively damaged to rear to compensator (1.1.11 (c)) | 1 |
| Nearside Rear Upper Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Front Brake pipe likely to become detached or damaged to rear |1.1.11 |d| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front x2 |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near rear wheels |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake pipe excessively damaged going to load sensing valve, worn |1.1.11 |c|| | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded centre cross member |1.1.21 |e| |i|| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body sil |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner arch |inner floor| |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mount to rear cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount - rear cross member
|2.4.A.3| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg holed |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear os out rigger corroded within 30 cm of leaf spring |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded within 30cm of strut mount |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded within 30cm of strut mount |6.1.B.2| | 1 |
| Integral body structure inadequately repaired such that structural rigidity is significantly reduced most of old repairs not welded properly (6.1.1 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger rear of spring (6.1.1 (c) (i)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp side light with indicator (4.2.3 (c)) | 1 |
| Offside Rear Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting holed at step (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at rear of leaf spring (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of leaf spring (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of arch (6.2.2 (d) (i)) | 1 |
| Front Wheel bearing rough when rotated both front (5.1.3 (b) (i)) | 1 |
| Rear Service brake effort inadequate at a wheel both rear (1.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded quarter cill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch / flooring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch / flooring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker mount on body |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Rear shocker mount on body |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail behind headlight |6.1.1 |c| |i|| | 1 |
| Nearside Front Braking system leaking brake hose |3.6.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of inner wing chassis leg |6.1.B.2| | 1 |
| Prop shaft bearing excessively worn front carrier bearing (6.1.7 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area of inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner/0uter sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside rear wheel arch to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength corroded where leaf spring bolts to chassis (5.3.6 (a) (i)) | 1 |
| Central Front Prop shaft bearing housing likely to fail the rubbers has completely deteriorated around bearing causing excessive movement (6.1.7 (f) (ii)) | 1 |
| Centre Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Body has a projection caused by corrosion INNER SILL AT REAR QUARTER |6.1.C.1| | 1 |
| Offside Body has a projection caused by corrosion SILL
|6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded main chassis rail holed behind shock absorber mouinting |2.4.A.3| | 1 |
| Prop shaft bearing housing insecure centre (6.1.7 (f) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear (5.3.6 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed behind o/s/f suspension strut (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill has a hole in it (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear inner sill has a hole in it (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis in side engine bay |2.4.A.3| | 1 |
| Offside Outer Body component damaged and likely to cause injury Step (6.2.1 (a) (i)) | 1 |
| Nearside Outer Body component damaged and likely to cause injury Step (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill / under step-box MARKED (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn 2 of 2 D-bush (5.3.4 (a) (i)) | 1 |
| Trailer electrical socket (13 pin) not functioning at all missing (4.10 (c) (ii)) | 1 |
| Prop shaft bearing excessively worn rear bearing/mount (6.1.7 (b) (i)) | 1 |
| Nearside Front Brake hose excessively damaged rubbed on shock absorber (1.1.12 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner/Outer Sill (Marked) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (Marked) (5.3.6 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill plus side step |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill rear of cab |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear lower arch/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced as marked |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several places as marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several places as marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Upper inner wheel arch painted white |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Upper inner wheel arch painted white |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded All over painted white |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded All over painted white |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Painted white |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Painted white |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/chassis leg |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing area. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing area. (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded floor/ chassis |2.4.A.3| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only cable broken |3.1.2| | 1 |
| Nearside Seat belt locking mechanism does not secure or release buckle in op |5.2.5a| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch by jacking point |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is inadequately repaired inner wheel arch |2.4.A.3| | 1 |
| Centre Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Outer Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage inappropriately repaired |2.4.A.2| | 1 |
| Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn bushes (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn Bush (5.3.4 (a) (i)) | 1 |
| Offside Outer Front Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced holed (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear mount areas holed various places (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front and rear mount areas holed various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake prescribed area is excessively corroded chassis leg at brake load valve holed (1.1.21 (e) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle areas and chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle and chassis areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded turret area |2.4.A.3| | 1 |
| Offside Front engine mounting bracket insecure and likely to fail chassis has corroded so much engine mounting has dropped into chassis |6.1.D.1b| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Door step |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer quarter panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer quarter panel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Wing / floor pan |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Wing / floor pan |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired suspension arm mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired suspension arm mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (strut mounting point ) (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of cab (7.1.1 (a) (i)) | 1 |
| Brake pedal anti-slip provision loose Worn through and split (1.1.2 (c)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill behind the step (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired lower arm (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill 2places |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill 2placs |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis 2 places |6.1.B.2| | 1 |
| brake disc in such a condition that it is seriously weakened Both sides front |3.5.1i| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both sides centre inner sil |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both sides rear inner sil |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside rear outer sil |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside rear |rear inner arch| |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside front inner wheel arch/chassis |6.1.B.2| | 1 |
| Nearside Rear Leaf spring fractured maine leaf |2.4.B.1a| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross beam (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting across back of cab fuel tank area (6.2.2 (d) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn d bar |5.3.4 |a| |i|| | 1 |
| Centre Rear Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Nearside Front Headlamp has a product on the light source which changes emitted colour to other than white or yellow (4.1.4 (b)) | 1 |
| Offside Front Headlamp has a product on the light source which changes emitted colour to other than white or yellow (4.1.4 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 patches (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger (front one of the two) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch x2 patches (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under side (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near engine mount (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind rear wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind rear wheel (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed by corrosion in several places |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill corroded at rear outer |5.3.6 |a| |i|| | 1 |
| Front Coil spring fractured or broken both |5.3.1 |b| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe mounting (6.1.2 (a)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury Rear bed mounting area (6.2.1 (a) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Bed mounting area (6.2.2 (d) (i)) | 1 |
| Seat belt damaged centre |7.1.2 |b| |i|| | 1 |
| Central Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Seat belt missing centre (7.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected door step (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected door step (5.3.6 (a) (ii)) | 1 |
| Front Power steering component|s| leaking steering rack |2.3.3b| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under os wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced under arch repair panel not seam welded as required |6.1.1 |b| |ii|| | 1 |
| Leaf spring fractured Both rear |2.4.B.1a| | 1 |
| Nearside Headlamp light source and lamp not compatible Led bulb (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible Led bulb (4.1.4 (c)) | 1 |
| Rear Road wheel fixing missing Left and right sides (5.2.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Left and right sides (6.1.1 (c) (i)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced Left and right sides (7.1.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Left and right sides (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis leg holed |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x member above axle |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis leg above subframe. |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing holed |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s+o/s /f inner steps and sills |7.1.1 |a| |i|| | 1 |
| Headlamp aim projected beam image is obviously incorrect n/s water inside headlight |4.1.2 |c|| | 1 |
| Offside Front Drivers door cannot be opened from outside the vehicle front o/s door wont open from outside the vehicle (6.2.3 (a)) | 1 |
| Nearside Front Headlamp not working on dipped beam front n/s headlamp not working on dipped beam or main (4.1.1 (a) (ii)) | 1 |
| Nearside Obligatory mirror seriously obscured affecting the rear view glass broken |8.1.2a| | 1 |
| Offside rear brake recording little or no effort poor reading |3.7.B.5a| | 1 |
| Front position lamp|s| not working both not working |1.1.A.3b| | 1 |
| Nearside Front Body has a sharp edge caused by damage door |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded understep |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill under step |5.2.6| | 1 |
| Rear Exhaust system not adequately supported held up by wire |7.1.1| | 1 |
| Offside Front Direction indicator missing side repetor |1.4.A.2b| | 1 |
| Rear Anti-roll bar pin or bush excessively worn n/s & o/s D bushes (5.3.4 (a) (i)) | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member corroded |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings and outer sill |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis/and near side around brake compensater |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mount area |2.4.A.3| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section by spring hanger |6.1.B.2| | 1 |
| Nearside front brake binding |3.8.A2a| | 1 |
| Nearside Front front brake binding |3.8.A2a| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill - as marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.4d| | 1 |
| Offside Rear Stop lamp not in good working order |function impaired| |1.3.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired leaf spring front mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near upper shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance near leaf spring rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired box section near leaf spring rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section near leaf spring rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near leaf spring front mount |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r box section near leaf spring front mount |5.3.6 |a| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded hand brake cable mounting box section |1.1.21 |e| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis near brake load valve |1.1.21 |e| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch near top strut mount |5.3.6 |a| |i|| | 1 |
| Nearside External window insecure and likely to fall out |6.11.1| | 1 |
| Offside Front Lower Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer step |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer step |7.1.1 |a| |i|| | 1 |
| Brake pipe at imminent risk of failure or fracture both front |1.1.11 |a|| | 1 |
| Nearside Front Position lamp not working inop (4.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis hole (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength nr leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nr to leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step to sill small hole (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed and corroded near shock mount |6.1.1 |c| |i|| | 1 |
| Nearside Inner Rear Seat belt flexible stalk cable has broken strands |5.1.B.5b| | 1 |
| Lower Towbar component excessively corroded |6.6.1| | 1 |
| Offside Inner Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Braking system leaking o/s/f brake pipe to hose |3.6.A.1| | 1 |
| Nearside Direction indicator not working side (4.4.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting insecure bolt lose (5.3.3 (a) (i)) | 1 |
| Nearside Rear Seat belt buckle missing |7.1.2 |d|| | 1 |
| Fuel system component leaking excessively or a risk of fire 2 & 3 injectors blowing fuel back up |6.1.3 |b| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability D bush badly worn |5.3.3 |a| |ii|| | 1 |
| Offside Front Body component damaged and likely to cause injury side rail under run sharp edges at front section due to damage. |6.2.1 |a| |i|| | 1 |
| Rear Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in/outer sill |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch inner cill outer cill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel asrch inner cill outer cil |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded several places |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded several places |2.4.A.3| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting both sides of rear crossmember |6.1.6 |i| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outter sill
|2.4.A.3| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement inner bush |2.4.G.2| | 1 |
| Central Stop lamp|s| with a multiple light source more than 1/2 not functioning |4.3.1 |a| |ii|| | 1 |
| Nearside Other passenger door cannot be opened from outside the vehicle side load door (6.2.3 (a)) | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper and lower step |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSF and OSF inner sills |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x7 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x10 |2.4.A.3| | 1 |
| brake disc in such a condition that it is seriously weakened NSF and OSF |3.5.1i| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSR and OSR Chassis |6.1.B.2| | 1 |
| Emissions not tested Exhaust blowing |7.3.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has corrosion/hole 30cm from the nearside rear leaf spring mount |6.1.B.2| | 1 |
| Entrance/exit door emergency control inoperative side doors not opening |6.2.C.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Cab steps in such a condition that it is likely to cause injury corroded (6.2.8 (b)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body panel rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body panel rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake prescribed area is excessively corroded chassis rail inner wheel arch (1.1.21 (e) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength complete wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced above leaf spring (6.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door cill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis ,behind spring |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis,in front of spring |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sil (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sil (5.3.6 (a) (i)) | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet, in wheel arch and under the vehicle (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside and offside, in wheel arch (6.2.2 (d) (i)) | 1 |
| Rear Floor excessively deteriorated nearside and offside wheel arch floor area (6.2.4 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside, by front and rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sill |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Road wheel fixing missing wheel bolt (5.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step as chalked (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch / floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear inner valance / chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength step/sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength step/sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 1 |
| Brake pipe likely to become detached or damaged front to rear pipes (1.1.11 (d) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i)) | 1 |
| Centre Exhaust has a major leak of exhaust gases loose |7.1.2| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 1 |
| Offside Rear Leaf spring cracked shackle mounting point |2.4.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area`s within shock absorber mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger area`s |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind roadwheel side of chassis and bottom |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-lock braking system component missing bracket corroded at unit /insequre |1.6 |e|| | 1 |
| Nearside Rear Braking system leaking pipe on axle |3.6.A.1| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| front end fractured or loose |2.4.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front end bottom of sill and inner arch |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded sill and door step |5.2.6| | 1 |
| Central Exhaust system not adequately supported x haust clamp corroded |7.1.1| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D bushes. Both (5.3.4 (a) (i)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section in two places (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill section in three places (6.1.1 (c) (i)) | 1 |
| Emissions not tested unable to take temperature measurement (8.2.2.2 (e)) | 1 |
| Towbar component excessively damaged socket |6.1.6 |a|| | 1 |
| Brake valve retaining device insecure rust holes around rear brake compensator |3.6.A.2d| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill and step near seat mountings |5.2.6| | 1 |
| Braking system leaking front to rear pipe leaking |3.6.A.1| | 1 |
| Nearside Front engine mounting bracket insecure and likely to fail chassis holed by engine/gearbox mounting |6.1.D.1b| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush inner bush |2.5.A.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded support floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded support floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded support floor |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded support floor |5.2.6| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect and offside front |1.8.A.1b| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded and offside front inner wheel arches |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and offside rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to shocker mounting area |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded panal corroded |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting cross member |6.6.6| | 1 |
| Nearside Front Front wheel bearing rough when rotated and offside front |2.5.A.2| | 1 |
| Offside Outer Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Brake load sensing valve linkage defective and function impaired leaking brake fluid |1.1.17 |a|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member,floor and rear quarter panel at spring shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel and rear cross member at spring shackle |5.3.6 |a| |i|| | 1 |
| Service brake effort inadequate at a wheel |Rear both wheels| |1.2.1 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded crossmember near n/s rear spring |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Nearside Rear Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Braking system leaking rear compensator valve |3.6.A.1| | 1 |
| Rear position lamp|s| not working both rear different brightness |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step/floor |5.2.6| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under door step as mark |6.1.B.2| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen and so dazzle |1.8.B.1| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings and n/s/r of damping rubber + damping rubber missing |6.1.B.2| | 1 |
| Front Lower Front drive shaft coupling flexible rubber or fabric coupling softened by oil contamination centre propshaft bearing |2.5.C.1e| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Above Axle Both Sides Of Chassis (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Above Axle Outer (6.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step into Rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Spring Hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Spring Hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users need changing bulb |1.8.A.1a| | 1 |
| Central Front Brake lever has restricted free movement (1.1.15 (e)) | 1 |
| Offside Rear position lamp|s| incorrect colour showing white light |1.1.A.3e| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Subframe mounting prescribed area is excessively corroded offside front chassis |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp flickers with indicator |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan/inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan/inner arch |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced bulkhead corroded (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger and sill (6.2.2 (d) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded of o/s/r |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1 of 4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 of 4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 of 4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 4 of 4 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Drivers seat (7.1.1 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced And Outer Sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced And Outer Sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross Member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced outer chassis holed (6.1.1 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis ,brake compensator (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer and inner sill (5.3.6 (a) (i)) | 1 |
| Brake performance not tested Leaking brake pipe (1.2.1 (g)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rear leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded rear leaf spring |2.4.A.3| | 1 |
| Offside Headlamp insecure internal |1.7.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Shock top mount (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Spring hanger (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Suspension mount (5.3.6 (a) (ii)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd crossmember from rear multiple holes (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 3rd crossmember from rear (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis at top of droplink (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis under arch (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember under rear of cab (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OSF inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded cab x member |5.2.6| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step. (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill x3 (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under step/sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear of spring (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember 2nd one in from rear (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill front and middle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded bottom driver side floor corroded |2.4.A.3| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.4.A2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake compensator mounting |6.1.A.1| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded and outer sill |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded and outer sill |5.2.6| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flich panel |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flich panel |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Central Seat belt buckle missing seat belt stork (7.1.2 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill centre (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill in front of rear wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner arch behind the wheel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner arch behind the wheel |6.1.B.2| | 1 |
| Central Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above rear axle (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system under bonnet area (1.1.11 (b) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/innersill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/innersill (7.1.1 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded mid chassie |2.4.A.3| | 1 |
| Front Fuel tank insecure strap weak corroded |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded center part outer sill |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury REAR ARCH CORRODED (6.2.1 (a) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill @ rear as marked, |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked, |6.1.B.2| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower wheel arch towards rear, (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting adjacent to front spring hanger front , (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting adjacent to rear spring shackle, (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch meets wing, (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing, (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch towards rear, (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger in two places, (6.2.2 (d) (i)) | 1 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened x 3 holes |2.4.B.6d| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rail |6.1.B.2| | 1 |
| Fuel tank insecure Rear tank strap corroded. |7.2.1| | 1 |
| Vehicle structure has an inadequate repair which adversely affects braking or steering chassis by load compensator. |6.1.A.1| | 1 |
| Rear Fuel pipe insecure |7.2.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 1 |
| Offside Front Floor excessively deteriorated Step |6.2.4 |a| |i|| | 1 |
| Rear Leaf spring seriously weakened Both |5.3.1 |b| |i|| | 1 |
| Nearside Front Front passenger door hinge insecure (6.2.3 (c) (ii)) | 1 |
| Offside Front Body has an unsafe modification (6.2.1 (d) (i)) | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember behind bumper |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings CROSS MEMBER |6.1.B.2| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired SEIZED (1.1.17 (a)) | 1 |
| Vehicle structure has a modification which adversely affects braking or steering crossmembers |6.1.A.1| | 1 |
| Nearside Vehicle structure has a modification which adversely affects braking or steering front to rear |6.1.A.1| | 1 |
| Offside Vehicle structure has a modification which adversely affects braking or steering front to rear |6.1.A.1| | 1 |
| Body insecure and dangerous to other road users Due to corrosion |6.1.B.1b| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various as marked |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various as marked |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower step |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear wishbone |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear wishbone |2.4.G.2| | 1 |
| Nearside Rear Additional braking device insecure Handbrake cable rubbing against inner wheel |3.6.I.1| | 1 |
| Power steering pipe/hose excessively corroded and leaking |2.1.5 |g| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under step |6.1.B.2| | 1 |
| Offside Front coil spring broken snapped at top |2.4.C.1a| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside inner step (7.1.1 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` Clutter |8.3.1b| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Clutter and hanging items |8.3.1e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting. Outrigger, inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting. Outrigger, inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting support structure |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting support structure |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber, floor to inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chalked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x2 all chalked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x2 all chalked |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shock mount area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shock mount area |2.4.A.3| | 1 |
| Nearside Brake valve insecurely mounted chassie rail due to corrosion and previouse repair carried out |3.6.A.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount corroded as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount corroded as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Towbar locking device insecure |6.6.3b| | 1 |
| Rear Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and backing |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mounting area n/s&o/s inner sills |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded front both sides leaf spring mounting area n/s&o/s inner sills |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to center outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill foot step area |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded At front spring eye. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded At front spring eye |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion top by door hinge |6.1.C.1| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn centre |2.4.G.4d| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system front to rear, leaking at bulkhead |1.1.11 |b| |ii|| | 1 |
| Front Brake pipe at imminent risk of failure or fracture at bulkhead underneath fuel filter |1.1.11 |a|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush seperated from pin |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear bush seperated from pin |5.3.4 |a| |i|| | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen bulb incorrectly fitted |4.1.2 |a|| | 1 |
| Rear Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Bonded suspension unit damaged and cannot function as intended |2.4.F.3| | 1 |
| Leaf spring main leaf fractured front eye |5.3.1 |b| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill inner and outer holed |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill nner and outer |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded innerwing x2 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innerwing x3 |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis leg, brake compensator mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing in various places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing in various places |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor to sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor to sill |5.2.6| | 1 |
| Offside Torque/reaction arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Suspension arm attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear most |2.4.A.3| | 1 |
| Offside Headlamp adversely affected by the operation of another lamp dip beam and main beam |1.7.5c| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded x4 |2.4.A.3| | 1 |
| Offside Rear Leaf spring damaged and permanently distorted broken |2.4.B.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x2 |6.6.6| | 1 |
| Drivers door catch missing both front doors (6.2.3 (c) (ii)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn lower sus arm rear bush collapsed (5.3.4 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step / inner sill |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member various holes |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner valance |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength doorstep (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced crossmember at rear of cab |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above nearside front subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Front position lamp|s| not working Top |roof lamp| |1.1.A.3b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sub frame/chassis corroded. |in wheel well area| |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Corrosion in prescribed area |above 1st exhaust closest to the engine| |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail inside wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember over rear axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under rear of sill |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis crossmember at n/s |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER ARCH TO SEVERAL PLACES |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded BEHIND SPRING AND FRONT ON SPRING IN A FEW PLACES |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OF SPRING AND FLOOR |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor in several places under arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor in several places under arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mounting in several places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under front arch |2.4.A.3| | 1 |
| Offside Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Central Statutory seat belt missing buckle |5.1.1| | 1 |
| Nearside Rear Outline marker lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Offside Rear Outline marker lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Nearside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced tipper body chassis frame |6.1.1 |c| |i|| | 1 |
| Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced tipper body chassis frame |6.1.1 |c| |i|| | 1 |
| Offside Front Direction indicator incorrect colour lens missing |1.4.A.2f| | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sil |6.1.1 |c| |i|| | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sil |6.1.1 |c| |i|| | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced no patern |1.7.5a| | 1 |
| Offside Front Axle swivel joint has excessive play in a ball joint |2.5.A.3b| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded hole in outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mount area |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside bonnet near strut top |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near engine mount under bonnet |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near strut mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near sub frame mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inside sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring mount point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring mount point rear |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring mount point front |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch near strut |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Above axle |6.1.B.2| | 1 |
| Offside Outer Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front spring hanger area |6.2.2 |d| |i|| | 1 |
| Rear Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded FRONT & CENTRE INNER SILLS HOLED & CORRODED TO EXCESS |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded FRONT & REAR INNER SILLS HOLED & CORRODED TO EXCESS |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OUTER SILL HOLED & CORRODED |2.4.A.3| | 1 |
| Rear Stop lamp not working O/S,N/S |1.2.1b| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings OUTER CHASSIS CRACKED, near inner wheel arch |6.1.B.2| | 1 |
| Nearside Parking brake inoperative on one side Needs adjustment (1.4.1 (a)) | 1 |
| Nearside Inner Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer chassis corroded near to shocker mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded near to shocker mount (outer) (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing near to strut mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing near strut mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near shocker mount (5.3.6 (a) (i)) | 1 |
| Front Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded within 30cm of brake load valve mounting bracket |1.1.21 |e| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill shocker |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section (6.2.2 (d) (i)) | 1 |
| Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer step hole |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has damage which adversely affects braking or steering sill by spring mounting point |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has damage which adversely affects braking or steering rear leaf spring mounting point |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has damage which adversely affects braking or steering front leaf spring mounting point |6.1.A.1| | 1 |
| Centre Rear Vehicle structure has damage which adversely affects braking or steering axle bump stops and upper shocker mounting points |6.1.A.1| | 1 |
| Centre Rear Vehicle structure has damage which adversely affects braking or steering compensator mounting point both inner and outer |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner and outer as marked
just one big hole |6.1.B.2| | 1 |
| Offside Front Leaf spring damaged and permanently distorted |2.4.B.1a| | 1 |
| Nearside Body has a sharp edge caused by corrosion centre sill |6.1.C.1| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings front leaf spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings rear leaf spring mout |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill |6.1.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened rear mount |2.4.B.6d| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSS MEMBER |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting/under sill area (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded Rear brake load valve area |1.1.21 |e| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arches both sides |6.1.B.2| | 1 |
| Nearside Rear Upper Anti-roll bar missing |2.4.G.1| | 1 |
| Front Body has a sharp edge caused by damage BUMPER |6.1.C.1| | 1 |
| Front Brake disc significantly and obviously worn Both |1.1.14 |a| |i|| | 1 |
| Nearside Body component corroded and likely to cause injury all (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill step (6.2.2 (d) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at prop mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D Bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D Bush |5.3.4 |a| |i|| | 1 |
| Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc Clip missing |2.5.C.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/s inner sill x 2 |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear inner wheel arches |6.1.B.2| | 1 |
| Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Loose |6.1.7 |g| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Osf inner wheel arch |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Os inner wing |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Os outer and inner sills |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Ns outer and inner sills |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Os and Ns sill closing panels |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Ns out rigger |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Ns and osr out riggers |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Nsf chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Wheel nut|s| missing 2x |4.2.A.1e| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both doorstep under sills in several places |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both outer sills in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both under sills in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear / rear chassis rail outriggers badly in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring rear mounting area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floors / inner flitches |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner flitch in several places |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near load sensing valve |6.1.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion floor as marked |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion floor as marked |6.1.C.1| | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced no pattern |1.7.5a| | 1 |
| Offside Front Headlamp not working on main beam side light |1.7.5a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Offside Rear Stop lamp not working and bad earth |1.2.1b| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp wrong bulb |1.1.A.3f| | 1 |
| brake disc in such a condition that it is seriously weakened both |3.5.1i| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering sills |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering sills |6.1.A.1| | 1 |
| Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch areas both sides |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step area |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring anchor |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wheel arch by suspension leg |6.1.A.1| | 1 |
| Brake valve leaking Rear load sensing valve |1.1.7 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner arch area |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/spare wheel cross member area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis rail area |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spare wheel cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced load floor repaired but not welded on all seams |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger patch not welded on all seam |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced panel adjacent to rear spring hanger holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel housing flange along panel joint |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by bump rubber |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by rear spring front hanger |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel housing holed |6.1.1 |c| |i|| | 1 |
| Nearside Steering linkage ball joint has excessive play track rod end |2.1.3 |b| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front out rigger |6.1.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened inner sill |2.4.B.6d| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened inner sill |2.4.B.6d| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Sill to floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Sill to floor |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded Sill to floor |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner wing and chassis |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure (5.3.4 (b) (ii)) | 1 |
| Fuel cap/sealing device ineffective temporary fuel cap (6.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Load bay floor between chassis outrigger and inner wheelarch (5.3.6 (a) (i)) | 1 |
| Centre Electrical wiring deteriorated and bare wires exposed also insecure |1.9.2c| | 1 |
| Direction indicators flashing more than 120 times a minute All |1.4.A.2g| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner turret (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded around rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top off leg |6.1.1 |c| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner/outer sills |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner/outer sills |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock absorber mounting| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock absorber mounting| |2.4.A.3| | 1 |
| Fuel pipe leaking injector spill pipes |7.2.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg front / rear and under bulk head |6.1.A.1| | 1 |
| Nearside Outer Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill to chassis |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Around bump top location (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chasssis near rear suspention (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Around brake pipe mounting (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Tail pipe (6.1.2 (a)) | 1 |
| Suspension component pin or bush likely to become detached Both rear bump stops missing (5.3.4 (a) (ii)) | 1 |
| Seat belt stitching badly frayed lap belt |5.2.2b| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded SILL
|2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded SILL
|2.4.A.3| | 1 |
| Nearside Front Radius arm severely distorted |2.4.G.1| | 1 |
| Offside Rear Headlamp insecure |1.7.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Floor to arch corroded within prescribed area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Floor to arch corroded within prescribed area |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 |6.1.1 |c| |i|| | 1 |
| Nearside Headlamp switch faulty |1.7.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower side of cab |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings close to leaf spring |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasiss rail |6.1.B.2| | 1 |
| Nearside Front Radius arm has excessive play in a pin/bush radius arm bush |2.4.G.2| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced crosss member fixing |6.1.1 |a| |i|| | 1 |
| Offside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underbody step door |6.1.B.2| | 1 |
| Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner arch and chassis |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner arch and chassis |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded rear of cab near sill |5.2.6| | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Steering linkage ball joint has excessive play inner rack arm |2.1.3 |b| |i|| | 1 |
| Nearside Front Steering linkage ball joint has excessive play inner rack arm |2.1.3 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis,inner wheel arch |5.3.6 |a| |i|| | 1 |
| Stop lamp not working both side |1.2.1b| | 1 |
| Lower Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Rear Lower Braking system leaking |3.6.A.1| | 1 |
| Stop lamp adversely affected by the operation of another lamp brake lights |1.2.1f| | 1 |
| Central Front Seat belt missing buckel |7.1.2 |a|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch / floor |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch / floor |6.2.2 |d| |i|| | 1 |
| Offside Rear Leaf spring fractured Front eye |2.4.B.1a| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Wheel arch |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended wishbone |2.4.F.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 1 |
| Front Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Upper Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Centre Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis in several places |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around rear spring, rear mount |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing to floor |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn front arm rear bush |5.3.4 |a| |i|| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded and holed |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded and holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body to chassis |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under bonnet under servo area |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed |7.1.1 |a| |i|| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both (4.4.3 (b)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill ALL WELDING TO BE LEFT CLEAN FOR INSPECTION (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch front of arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch back of arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger/ leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch back of arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill/door step (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill/leaf spring mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill behind wheel (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative seized (1.1.17 (c) (ii)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch x3 places (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger area |6.1.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp all rear lights |1.1.A.3f| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired not seam welded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor/inner wheel arch as marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing holed |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rearward spring mount as marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing as marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing as marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring into inner sill as marked |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch to floor as marked |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch to floor area as marked |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded front of wheel arch seatbelt stiffener as marked |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded front of wheel arch seatbelt stiffener as marked |5.2.6| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting osf chassis rail
both front steps
nsr sill
rear floor (6.2.2 (d) (i)) | 1 |
| Rear Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Inner Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting rear of inner sill (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting rear of inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Track rod end loose locking nut missing |2.2.B.1d| | 1 |
| Offside Track rod end loose locking nut missing |2.2.B.1d| | 1 |
| Offside Front Lower Suspension component ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Leaf spring shackle pin or bush excessively worn both front and rear |5.3.4 |a| |i|| | 1 |
| Offside Front Steering locking device missing (2.1.3 (d)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis behind wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis behind wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill 30cm to rear spring hanger (5.3.6 (a) (i)) | 1 |
| Brake performance not tested due to osf brake binding badly (1.2.1 (g)) | 1 |
| Offside Front Windscreen wiper not working Insecure |3.4 |a|| | 1 |
| Passenger`s seat insecure Both outer fixing bolts are missing |6.2.6 |a| |ii|| | 1 |
| Central Rear Prop shaft likely to become detached (6.1.7 (a) (ii)) | 1 |
| Inner Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis above tank |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner step sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded all rear cross member |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting all rear cross member |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis side of front spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis side of front spring hanger |2.4.A.3| | 1 |
| Front Body has a sharp edge caused by corrosion Nearside & offside |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outersill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Floor into wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop sill |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill and drop sill |5.2.6| | 1 |
| Nearside Front Brake pipe connection leaking on a hydraulic braking system caliper union |1.1.11 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & backing |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CROSS MEMBER (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Service brake imbalanced across an axle imbalance on n/s rear brake |1.2.1 |b| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rearmost inner panel near rear chassis member |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced Outer sill |6.1.1 |a| |i|| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced inner sill front & centre |6.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced Inner sill |6.1.1 |a| |i|| | 1 |
| Front Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (5.3.6 (a) (i)) | 1 |
| Brake prescribed area is excessively corroded compensator valve (1.1.21 (e) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill badly |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner flitches |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail out rigger badly |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis rail by compensator |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting area|chassis| |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under sill badly |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner flitches very badly |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner flitch badly in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner flitch badly in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floors /flitches |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded BOTH sides rear spring rear mounting points corroded to excess |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear cross member within 30cm of n/s spring mounting at bumper mounting point |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion centre outer sill |6.1.C.1| | 1 |
| Fuel system component leaking injection pump |7.2.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded within 30cm of lower seatbelt mounting point inner sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring anchorage point |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30cm of rear off side shocker mounting |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded excessive corrosion within 30cm of off side rear shocker mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter (5.3.6 (a) (i)) | 1 |
| Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Offside Front Mechanical brake component locking device missing |3.5.1l| | 1 |
| Offside Inner Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Additional braking device insecure |3.6.I.1| | 1 |
| Offside Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded step and outer sill area |5.2.6| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded cab cross member |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor by step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases beetween silencers |6.1.2 |a|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rear of cab |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rear of cab |6.1.1 |c| |i|| | 1 |
| Offside Inner Front Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross brace near side (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch cental and rear (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Fuel system component leaking at join above axle (6.1.3 (b) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing behind spring (5.3.6 (a) (i)) | 1 |
| Rear All outline marker lamps missing both |4.2.1 |a|| | 1 |
| Offside Inner Front Lower Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Offside Front suspension retaining device missing |2.5.A.4| | 1 |
| Nearside Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Front Lower Braking system leaking |3.6.A.1| | 1 |
| Offside Front Lower Power steering pipe/hose leaking |2.1.5 |a|| | 1 |
| Offside Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 1 |
| Power steering pipe/hose leaking pipe to rack (2.1.5 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower step (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step to sill (6.1.1 (c) (i)) | 1 |
| Anti-roll bar linkage pin or bush excessively worn fronts (5.3.4 (a) (i)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member corroded (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (handbrake fixing mounting) (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab |6.2.2 |d| |i|| | 1 |
| Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded parking brake cable mount chalked |3.1.9| | 1 |
| Offside Rear Outer Anti-roll bar insecure |2.4.G.1| | 1 |
| Nearside Rear Lower Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Front Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| Rear Braking system leaking rear flexy joints |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner wing/chassis area (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired Rear inner sills (5.3.6 (a) (i)) | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect fitted incorrectly |1.8.A.1b| | 1 |
| Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member/spring mount |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner chassis |6.1.A.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch and turrett |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired inner arch/susp,mount fibreglassed |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer chassis |6.1.A.1| | 1 |
| Rear Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near fuel tank (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting point |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Strut mounting area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Strut mounting area |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner panal |6.6.6| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded Shock mount |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded Shock mounting |2.4.A.3| | 1 |
| Windscreen in an unacceptable condition cracked (3.2 (c) (i)) | 1 |
| Offside Front Seat belt buckle not functioning as intended drivers (7.1.2 (d)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting after wheel (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting before wheel (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill inner (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill outer (6.2.2 (d) (i)) | 1 |
| Offside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded Cross member (1.1.21 (e) (i)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected Cross Member (1.1.21 (e) (ii)) | 1 |
| Power steering pipe/hose leaking At Rack (2.1.5 (a)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Prop shaft securing bolt loose |6.1.7 |a| |i|| | 1 |
| Offside Rear Brake cable has restricted free movement outer split due to cable being taught between bracket and wheel (1.1.15 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength filled with filler (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s n/s inner arches varius places and filled with filler (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit plate 1.19
reading 9.86 (8.2.2.2 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill front of spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch box (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill rear of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill rear of spring (5.3.6 (a) (i)) | 1 |
| Rear Brake load sensing valve linkage defective and function impaired reg valve semi sezed (1.1.17 (a)) | 1 |
| Stop lamp adversely affected by the operation of another lamp Both rear |1.2.1f| | 1 |
| Rear fog lamp adversely affected by the operation of another lamp both rear |1.3.2f| | 1 |
| Offside Front Brake hose damaged and likely to fail hose not secured to chassei |1.1.12 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected rear spring rear mount detached |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front bush/spring rubbing mounting |2.4.B.2| | 1 |
| Nearside Rear Anti-roll bar linkage insecure upper bolt missing |2.4.G.1| | 1 |
| Offside Front Outline marker lamp light intensity significantly reduced Lens missing (4.2.3 (a) (ii)) | 1 |
| Nearside Front Drive shaft securing bolt missing locking split pin (6.1.7 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie leg various places above sub frame (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Offside Inner Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Nearside Front Electrical wiring insecure and connectors likely to become disconnected ABS wiring |4.11 |a| |ii|| | 1 |
| Nearside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front suspension mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shock mount |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger and floor |6.1.1 |c| |i|| | 1 |
| Rear position lamp|s| not working number plate |1.1.A.3b| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion door step |6.1.C.1| | 1 |
| Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced rear bush |2.4.F.2| | 1 |
| Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced rear bush |2.4.F.2| | 1 |
| Offside Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
| Nearside Front Lower Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Power steering pipe/hose excessively damaged (2.1.5 (g) (i)) | 1 |
| Offside Rear Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner ach multiple points |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch multiple points |5.2.6| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp side and indicated |4.2.3 |c|| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced corrosion repair,not continues weld |6.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced corrosion repair,not continues weld |6.1.1 |a| |i|| | 1 |
| Brake performance not tested brake travel |1.2.1 |g|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of rear leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front of rear leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front of rear leaf spring mounting area |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch to inner piller |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by the rear leaf spring mount area |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm pin or bush likely to become detached rear bush (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength 30cm of front hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis holed |3.3.A.2| | 1 |
| Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member for spare wheel |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by damage wheel arch |6.1.C.1| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded wing in wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing in wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outrigger |5.3.6 |a| |ii|| | 1 |
| Offside Passenger`s seat insecure back row |6.2.A.1| | 1 |
| Offside Passenger`s seat insecure 3rd row |6.2.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger holed by spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail holed on inside near damper mount |2.4.A.3| | 1 |
| Leaf spring has excessive wear in a shackle pin and/or bush both rear |2.4.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis underarch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring rear chassis mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring rear chassis mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded chassis outrigger at leafspring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring hanger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis section under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under vehicle |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded seat mounting |2.4.A.3| | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement At gearbox dogbone mount - bush excessively worn (6.1.8 (a) (i)) | 1 |
| Bonnet cannot be secured in the closed position cannot be opened |8.4.1| | 1 |
| Exhaust has a major leak of exhaust gases exhaust silencers blowing |7.1.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step sill area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step sill area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill area and inner sill area |5.2.6| | 1 |
| Offside Front Ball joint has excessive play inner rack end |2.2.B.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box sections by spring mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box sections by rear spring mounting areas |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear back panel by spring mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch areas |2.4.A.3| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded n/s spring eye |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under sill and outrigger by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill and chassis by spring shackle |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded floor pan by shock absorber |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by brake valve |3.3.A.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill in 2places |6.1.B.2| | 1 |
| Offside Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Sills |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Member |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured By leaf spring |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Member |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Member |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Member |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing in area of shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill corroded and holed |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill holed and corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear outrigger holed and corroded in area of leaf spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r sill holed and rusty (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r wheel arch holed (5.3.6 (a) (i)) | 1 |
| Suspension arm pin or bush likely to become detached rear bump stops missing (5.3.4 (a) (ii)) | 1 |
| Obligatory mirror does not provide a view to the rear glass smashed (3.3 (c)) | 1 |
| Central Prop shaft flexible coupling excessively deteriorated bush has gone (6.1.7 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor has rusted through in shock mount prescribed area (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step to floor rusted through (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring spring hanger area |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer cill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer cill |6.1.B.2| | 1 |
| Emissions not tested Engine oil leak |7.3.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis and inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Under sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis 2parts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner arche |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner arche |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Both rear out riggers |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Both rear floors corroded |2.4.A.3| | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring suspension component |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement as marked. also ball joint dust cover damaged |2.4.G.2| | 1 |
| Offside Driver`s view to front impaired by damage |6.9.1b| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Load Door Step (6.1.1 (c) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sills |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sills |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel well |6.1.B.2| | 1 |
| Offside Rear Upper Leaf spring fractured spring eye broken |2.4.B.1a| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded At shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded At shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock |inner arch| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock |inner arch| |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance damaged showing hite light to rear. |1.1.A.3d| | 1 |
| Front wheel bearing has excessive play Offside |2.5.A.3c| | 1 |
| Headlamp aim beam image obviously incorrect Nearside |1.8.A.1b| | 1 |
| Suspension arm ball joint excessively worn Both front (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x 3 areas |2.4.A.3| | 1 |
| Nearside Front Upper Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/f inner vallance |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front mount |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings excessive corrotion in nearside and offside rear chassis members and offside front inner wing panell |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement excessive movement in nearside front lower wishbone rear mtg |2.4.G.2| | 1 |
| Offside Body has a sharp edge caused by corrosion steo |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchour bracket |2.4.A.3| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded sill/step |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner vallance |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner vallance |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill x2 |2.4.A.3| | 1 |
| Nearside Front brake caliper securing device missing slider bolt missing |3.5.1j| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing |7.1.1 |a| |i|| | 1 |
| Rear Entrance/exit step anti-slip provision deteriorated to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Leaf spring shackle |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength By leaf spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By shock top |5.3.6 |a| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Complete inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 1 |
| Power steering component|s| leaking Reservoir over filled |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded door shut |2.4.A.3| | 1 |
| Fuel system component leaking engine compartment/fuel pump area |7.2.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear leaf spring rear mounting areas |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear leaf spring front mounting areas - inner + outer sills |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear chassis rails |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan + inner sill |5.2.6| | 1 |
| Power steering component|s| leaking + fluid level low |2.3.3b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail where engine mounting is |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength May areas as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Many areas as marked (5.3.6 (a) (i)) | 1 |
| Front Fuel tank so insecure there is a risk of fire Snapped (6.1.3 (a) (ii)) | 1 |
| Rear Fuel tank so insecure there is a risk of fire Corroded (6.1.3 (a) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both side |6.1.1 |c| |i|| | 1 |
| Rear Rear fog lamp not working Both. |1.3.2b| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch. |6.1.B.2| | 1 |
| Nearside Stop lamp|s| likely to become detached damaged |4.3.1 |c| |ii|| | 1 |
| Offside Drive shaft joint excessively worn c.v joint |6.1.7 |c| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 1 |
| Offside Steering linkage ball joint has excessive play inner arm joint |2.1.3 |b| |i|| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Subframe mounting prescribed area is excessively corroded Off side front chassis @ sub frame mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer seel |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner seel |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner seel |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer seel |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill and inner sill/step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sil |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both inner and outer sills below doors |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner and outer sills |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill under door |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded and in wheel arch behind wheel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded and in wheel arch behind wheel |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Statutory seat belt missing rearmost seat |5.1.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelarch (6.1.1 (c) (i)) | 1 |
| Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING MOUNTING |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury WHEEL ARCH |6.2.1 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury OUTER SILL |6.2.1 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front angor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis shock absorber mounting |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis various section |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis various section |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded inner wings both sides |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep and sideplate |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear chassis, outrigger and inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear chassis,outrigger and inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber outrigger |2.4.A.3| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded floor and outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front of spring outrigger and chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at front of spring outrigger and chassis |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member. various areas. |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded various areas. |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded out riggers.various areas. |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded sill.various areas. |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill.various areas |2.4.A.3| | 1 |
| Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring hagers (6.1.1 (c) (ii)) | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring hangers (6.1.1 (c) (ii)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both sides (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at load sense valve (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CROSS MEMEBER (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush inner rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear main chassis and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sill main chassis and rear cross member |2.4.A.3| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both sides front to rear |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner wing/wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing/wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Nearside Fuel cap/sealing device ineffective temporary cap fitted that does not secure by a positive means to maintain pressure on the sealing device |6.1.3 |b| |i|| | 1 |
| Brake pedal anti-slip provision worn smooth anti-slip device incomplete |1.1.2 |c|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner & outer sill areas |2.4.A.3| | 1 |
| Front Lower Suspension arm has excessive play in a ball joint both |2.4.G.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Headlamp not working on dipped beam dipbeam |4.1.1 |a| |ii|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced midlebodtsill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bodysill |6.1.1 |c| |i|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner bumper bar |6.1.B.2| | 1 |
| Nearside Front Driver`s view to front impaired by crack |6.9.1b| | 1 |
| Offside Rear Lower Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 1 |
| Nearside Front Lower Suspension arm locating pin incorrectly positioned |2.4.G.3a| | 1 |
| Nearside Front Lower brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill near shackle bracket |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded body near shackle bracket |2.4.A.3| | 1 |
| engine mounting bracket damaged and likely to fail |6.1.D.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner body / near shackle bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle bracket mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle bracket mounting |2.4.A.3| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded strut mount inner wing/bulkhead area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount area inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |front leaf spring| mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |front leaf spring mount area inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded and o/s/r upper shock adsorber mount |inner arches/floor areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured inner chassis within upper shock mount area |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by damage mirrorhead surround broken |6.1.C.1| | 1 |
| Offside Front Trailing arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch by chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch by chassis |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp stop sidelight foglamp |1.1.A.3f| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill by chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis multiple areas |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch by shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill by chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength end ending/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail spring shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near load sensing valve (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail shackle mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail /cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring hanger 1 of 3 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring hanger 2 of 3 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring hanger 3 of 3 (5.3.6 (a) (i)) | 1 |
| Macpherson strut inappropriately repaired |2.4.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger|rear spring rear mount| |2.4.A.3| | 1 |
| Stop lamp not working Both rear |1.2.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing / inner arch area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear panel corroded o/s and towards the middle |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill and also inner rear lower arch corroded |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill the welded patch is insufficiently welded |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail inner face |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mounting point |2.4.A.3| | 1 |
| Centre Front Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both sills and rear wheel arches |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r and o/s/f |2.4.A.3| | 1 |
| All position lamps not working all |1.1.A.3b| | 1 |
| Front position lamp|s| not working n/s & o/s |1.1.A.3b| | 1 |
| Rear position lamp|s| not working n/s & o/s |1.1.A.3b| | 1 |
| Stop lamp not working n/s & o/s |1.2.1b| | 1 |
| Offside Rear Position lamp likely to become detached lamp cluster |4.2.1 |c| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill corroded within 30cms mounting point |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill corroded within 30cms mounting point |5.2.6| | 1 |
| Offside Direction indicators not working when hazards on |1.4.A.2c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill near spring mount |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x3 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x3 |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x3 |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Bonnet primary retaining device ineffective un-able to open |3.1 |c|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear of leaf spring x3 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis front of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis rear shocker mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis rear shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near inner sell |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sell |5.2.6| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded ns inner sell |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp indicator and side light |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer seal |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement front wishbone rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of leaf spring |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear wheel |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both offside and nearside inner sills/chassis corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis corroded within 30cm of suspension/subframe mounting points |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure, (6.1.7 (g) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper next to coil spring mount. (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill near step |5.2.6| | 1 |
| Nearside Front Floor excessively deteriorated step area (6.2.4 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor and rear sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle mountong |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded doorstep on top |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep on top |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger at rear of rear spring |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded at front of rear wheel |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 1 |
| Rear Shock absorbers has a serious fluid leak NEARSIDE & OFFSIDE |5.3.2 |b|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NEARSIDE + CENTRE + REAR SILL |6.1.B.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced CENTRAL SILL (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER & OUTER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NEARSIDE & OFFSIDE UPPER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Rear Inner Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected NEARSIDE & OFFSIDE HANGERS (5.3.6 (a) (ii)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Inner Rear Lower Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Nearside Front Lower Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Lower Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Rear Upper Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Rear Upper Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Rear Lower Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Rear Lower Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Inner Rear Upper Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner wing |2.4.A.3| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded sill/floor |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded sill/floor |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis/body |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring shackle |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired door step/ inner and outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner/ outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner/ outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis above axle welding has failed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/ floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Brake pipe inadequately supported rear flexible hose bracket in surcure |3.6.B.1| | 1 |
| Nearside Front Macpherson strut inappropriately repaired fixing bolt incorrect |2.4.A.2| | 1 |
| Offside Front Macpherson strut insecure fixing bolt incorrect |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing wheel arch area as marked |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering suspension strut area as marked |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger rear mounting bracket area |6.1.A.1| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner and outer sill (5.3.6 (a) (ii)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner wing |2.1.2 |e| |i|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded step |2.1.2 |e| |i|| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chasis |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering floor |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chasis |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering floor |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chasis x 2 |6.1.1 |a| |ii|| | 1 |
| Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Inner and outer sill, full inner step (6.2.2 (d) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner outer sill arch step (6.1.1 (c) (i)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal pipes into steering rack |2.3.3b| | 1 |
| Nearside Inner Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of inner arch |2.4.A.3| | 1 |
| Nearside Inner passenger door hinge insecure |6.2.B.2| | 1 |
| Nearside Front Shock absorber insecure |2.6.2b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring front mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring rear mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg. (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing housing likely to fail 2nd mount (6.1.7 (f) (ii)) | 1 |
| Nearside Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Offside Outer Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Offside Seat belt fluffed or frayed which has clearly weakened the webbing |5.1.B.3b| | 1 |
| Rear Wheel insecure |4.2.A.1c| | 1 |
| Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting x member |6.6.6| | 1 |
| Nearside Inner Steering system has excessive free play detected at the steering wheel |steering rack fitted| rack bush |2.2.A.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring area (5.3.6 (a) (i)) | 1 |
| Body component likely to become detached engine/gearbox mount fixing has excessive corrosion (6.2.1 (a) (ii)) | 1 |
| Central Seat belt not functioning as intended unable to find buckle/buckle missing (7.1.2 (c)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury at rear door (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury at rear door (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch chassis |2.4.A.3| | 1 |
| Nearside Front Lower Headlamp not working on dipped beam |1.7.5a| | 1 |
| Centre Front Lower Brake pedal pad not secure to the pedal |3.3.A.1c| | 1 |
| Nearside Front Shock absorber insecure hub assembly loose |2.7.2b| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner front wheel arches rear position leading to inner sill, large amounts of corrosion, outer sills on n/s lower |6.1.B.2| | 1 |
| Fuel tank insecure rear tank strap broken, ft tank strap cracked |7.2.1| | 1 |
| Electrical wiring deteriorated, likely to cause a short steering shaft |1.9.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front end of rear spring 30cm of mount (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door steep |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door steep |6.1.B.2| | 1 |
| Centre Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chaiss |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger and main chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger and main chassis |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp Flashing instead of indicator |1.1.A.3f| | 1 |
| Nearside Rear Direction indicator not working Position lamp|s| flashing instead of indicator |1.4.A.2c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner/outer sill & wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner/outer sill & wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear leaf spring mounting - Inner supporting panel |2.4.A.3| | 1 |
| Upper Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Upper Steering column universal joint has excessive play |2.1.5| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under driver door |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet flitch panel |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet wing panel |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near back arch chassie |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front fo |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking at pump? |7.2.3| | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings crossmember corroded x3 |6.1.B.2| | 1 |
| Offside Body has a projection caused by corrosion outer cill |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by damage inner cill |6.1.C.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and under passenger door step |6.1.B.2| | 1 |
| Offside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt track rod end |2.2.C.1c| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt wishbone outer ball joint cover |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg x3 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg x2 |6.1.B.2| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in various places |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in various places+ lower wheel arch area |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner wing to floor pan areas |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage wheel trim |6.1.C.1| | 1 |
| Offside Obligatory mirror seriously obscured affecting the rear view stickers on window |8.1.2a| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded centre sill panel |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail both sides, top shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger, rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger, rear leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor, top shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leafspring mount |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases on flexi joint |7.1.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sill corroded |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel inner arch corroded |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanging area x3 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch behind wheel |2.4.A.3| | 1 |
| Offside Front Upper Braking system leaking |3.6.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer door sill |6.1.B.2| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded and outer sills corroded |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill hole |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with in 30 cm of spring hanger | front hanger| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength with in 30cm of spring hanger | rear hanger| |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component pin or bush excessively worn bottom shock absorber mount |5.3.4 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill area |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis by leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out riger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out riger |2.4.A.3| | 1 |
| Offside Brake servo insecurely mounted |3.6.A.2a| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings both sides bottom sills have corrossion |6.1.B.2| | 1 |
| Central Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch front and rear (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch front and rear (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected behind rear wheel (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected behind rear wheel (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis by leaf spring (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis by leaf spring (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering leaf spring (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering leaf spring (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step (6.1.1 (c) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear chassis (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting at rear outrigger and inner panel |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner sill near rear spring mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear front inner sill near spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch in front of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill by leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by load valve |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis weak |2.4.A.3| | 1 |
| Offside Body component damaged and likely to cause injury Door mirror housing. (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber
|2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill/chassis |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component missing bump stop |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch/chassis |5.3.6 |a| |ii|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill holed |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer panel corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel corroded (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill backing |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near shockabsorber |5.3.6 |a| |i|| | 1 |
| Centre Rear Brake linkage locking device missing |3.5.1l| | 1 |
| Offside Rear Seat belt locking mechanism does not secure or release missing |5.2.5a| | 1 |
| Nearside Front Front position lamp|s| not working roof lamp |1.1.A.3b| | 1 |
| Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear outer sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of both front and rear mountings |2.4.A.3| | 1 |
| Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings engine mount area |6.1.B.2| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both rear chasie rotton ns outer sill |6.1.B.2| | 1 |
| Brake pipe twisted |found during steering lock to lock check| across axel |2.2.D.2b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outer sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember x3 |6.1.B.2| | 1 |
| Offside Front Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 1 |
| Brake load sensing valve defective and function impaired Freed off |3.6.E.3| | 1 |
| Offside Front position lamp|s| not working Front |1.1.A.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting |rear of| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting |rear of| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring |front of| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring |front of| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sil (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock absorber mount (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Ball joint has excessive play |2.2.B.1f| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front to rear sills inner & outer (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear wheel arches (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front & both rear inner wheel arches |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front to rear inner & outer sills |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear panel |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis |6.1.1 |c| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Crossmembers both sides |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR CHASSIS BEHIND WHEELS (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings under wheel arch hole |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Nearside Rear Brake cable damaged Chaffed |1.1.15 |a|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom ball joint
|2.4.G.2| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill area
|2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill area
|2.4.A.3| | 1 |
| Stop lamp adversely affected by the operation of another lamp when indicators applied both rear lights affected |1.2.1f| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded center sill area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner arch by spring front mounting |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded lower arch area/sill |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Suspension component mounting prescribed area fractured significantly reducing structural strength nsr upper shock absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rear of |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rear of |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch tub |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch tub |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step/floorpan |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step /floorpan |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf string mount outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area floor by shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area floor by shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded area of rear outrigger |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing chassis |6.1.B.2| | 1 |
| Offside Front Road wheel fixing missing Nut Missing |5.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front off spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear off spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel to floor |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded rear sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring area |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Driver`s door cannot be opened from outside the vehicle Intermittant |6.2.B.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger at front spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at front spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear spring mount |6.1.B.2| | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release centre |5.2.5a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outriggers,inner sill |6.1.B.2| | 1 |
| Centre Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering sill rail |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring front hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring rear hanger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring rear hanger |6.1.B.2| | 1 |
| Additional braking device damaged rear brake load valve bent |3.6.I.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner & outer lower sill, rear inner wheel arch & rear spring mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower inner sill, inner wheel arch & spring mount. |2.4.A.3| | 1 |
| Stop lamp not working Both side |1.2.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner body |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front, spring mount |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded lower body |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Track rod end ball joint has excessive play BOTH N/S O/S OUTTER |2.2.B.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded 6 areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded 6areas |2.4.A.3| | 1 |
| Centre Brake pedal pad not secure to the pedal |3.3.A.1c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner/outer/wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger at spring front mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger and sill at spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded center back of sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger just behind spring front eye as marked |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner flitch under wheel arch as marked |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing as marked |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve, marked yellow |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber marked yellow |2.4.A.3| | 1 |
| Offside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mount (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill at rear |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear panels by spring |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear spring front hangers |3 places| |2.4.A.3| | 1 |
| Central Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb in wrong |1.8.A.1b| | 1 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended arm |2.4.F.3| | 1 |
| Offside Front Bonded suspension unit deteriorated and cannot function as intended arm |2.4.F.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded intermediate outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded intermediate outrigger |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion door post |6.1.C.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |rear spring mounting| |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sill/wheelarch |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury sill, needs welding |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength foot step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (rear)x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step x2 |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 |6.1.B.2| | 1 |
| engine mounting deteriorated resulting in excessive movement gearbox
|6.1.D.1a| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floor by out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at bump stop area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outter sill |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER & OUTER SILLS |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER & OUTER SILLS |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings VALANCE |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings VALANCE |6.1.B.2| | 1 |
| Nearside Front Braking system leaking CALIPER |3.6.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mount |5.3.6 |a| |i|| | 1 |
| Body has an unsafe modification n/s and o/s rear floor pan and wheel arches |6.2.1 |d| |i|| | 1 |
| Nearside Front Horn not a constant note |1.7.1e| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Box sections |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Box sections |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Door step |2.4.A.3| | 1 |
| Offside Front Loading door cannot be secured in the closed position door step inside as marked |6.4.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings has been marked |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg in engine bay |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg in engine bay |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg in inner wheel arch |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg in inner wheel arch |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis corrosion with in 30cm of rear spring mounting |2.4.A.3| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill under van |6.2.2 |d| |i|| | 1 |
| Offside Front Driver`s door hinge insecure |6.2.3 |c| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under door step |6.2.2 |d| |i|| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Obligatory mirror insecure door |8.1.1| | 1 |
| Nearside Obligatory mirror missing door mirror glass |8.1.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner door sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill/ step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under sill/step |5.2.6| | 1 |
| Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance broken lens |1.4.A.2e| | 1 |
| Nearside Rear Direction indicator incorrect colour rear lamp damaged |1.4.A.2f| | 1 |
| Nearside Rear Position lamp showing white light to the rear crack in lens (4.2.3 (a) (ii)) | 1 |
| Bonnet primary retaining device ineffective bonnet catch fault (3.1 (c)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill/wheelarch (6.2.2 (d) (ii)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor corroded (6.1.1 (c) (i)) | 1 |
| Brake pedal anti-slip provision loose (1.1.2 (c)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch corroded marked yellow |6.1.B.2| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Rear Brake master cylinder leaking wheel cylinder |1.1.10 |b| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and step (6.1.1 (c) (i)) | 1 |
| Central Rear Prop shaft joint excessively worn rear joint at axle (6.1.7 (c) (i)) | 1 |
| Front position lamp|s| not working side |1.1.A.3b| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Step - Hole - Yellow Chalked (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength Inner Sill - Towards Rear Arch - Yellow Chalked (5.3.6 (a) (i)) | 1 |
| Rear Service brake imbalanced across an axle No Effort Recorded OS - Low Effort NS (1.2.1 (b) (i)) | 1 |
| Nearside Front Position lamp not working Sidelight (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting otrigger behind n/s rear wheel corroded through (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer step (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis rail between spring mounts |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill step |6.1.B.2| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Nearside Body component damaged and likely to cause injury side door handle |6.2.1 |a| |i|| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp indicator/ side light flashing |4.2.3 |c|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis/inner wing under bonnet (1.1.21 (e) (i)) | 1 |
| Offside Front Brake hose inappropriately repaired insecure |3.6.A.3| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of wheel arch /bulkhead |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of wheel arch /bulkhead |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill centre section |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / chassis leg |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis box section over axle |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis box section over axle |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out riggers at rear of wheel arch |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out riggers at rear of wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to rear of wheel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to rear of wheel |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| incorrect colour lamp damaged |1.1.A.3e| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of rear cross member |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded of chassis viewable from wheel arch area |2.4.A.3| | 1 |
| Emissions not tested due to excessive black smoke under acceleration |7.4.B.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |B pillar base| |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |B pillar base| |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section/rear sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail |spring anchor area| |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outer wheel arch |6.1.C.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect and condensation |1.8.A.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quarter panel inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill to spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to spring hanger |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers floor pan |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 1 |
| Hazard warning lamps operated by more than one switch only works when left indicator in on |1.4.B.1c| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by subframe as marked |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D Bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D Bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded front steps/inner sill both sides |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm severely distorted |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rear leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rear inner arch |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases middle silencer box |7.1.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill has 1 hole |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has 4 holes |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has 3 holes |6.1.B.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded Step sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Chassis leg |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded Step sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Center floor |5.2.6| | 1 |
| Body insecure and dangerous to other road users Front bumper |6.1.B.1b| | 1 |
| Offside Inner Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded doorstep and inner sill area |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded door step and inner sill area |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded center outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering load scencing valve |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nsr inner wheel arch |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x- member |6.1.1 |c| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone |5.3.4 |a| |i|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x3 (6.2.2 (d) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively damaged (1.1.21 (e) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area is severely distorted outer sill distorted and split |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most outrigger |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep/inner sill |5.2.6| | 1 |
| Fuel tank insecure front tank strap corroded and broken |7.2.1| | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp with stop light |1.4.A.2h| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` phone holder |8.3.1b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to doorstep floor and inner and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at the side of the steering columb (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg to doorstep floor to outer and inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg below the engine compartment fuse box to inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicators incorrect colour lamp holed |1.4.A.2f| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body cross member under rear of cab |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded nearside rear of cab |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail inside wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail inside wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded x memeber |2.4.A.3| | 1 |
| Front Power steering pipe|s| or hose|s| inappropriately modified |2.3.7| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chrossmember |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension arm ball joint excessively worn loose in hub |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached arm rear bush |5.3.4 |a| |ii|| | 1 |
| Offside Front Suspension arm pin or bush likely to become detached wishbone rear bush |5.3.4 |a| |ii|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flour |6.1.B.2| | 1 |
| Nearside Rear rear brake recording little or no effort handbrake |3.7.B.5a| | 1 |
| Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Nearside Front Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Front Body insecure and dangerous to other road users bumper & o/s/f wing |6.1.B.1b| | 1 |
| Nearside Rear Brake cable has restricted free movement parking brake cable |3.5.1k| | 1 |
| Offside Rear Brake cable has restricted free movement parking brake cable |3.5.1k| | 1 |
| Nearside Rear Inner Electrical wiring damaged, likely to become detached to rear lamps |1.9.2b| | 1 |
| Nearside Rear Inner Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body cab |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body cab |6.1.B.2| | 1 |
| Nearside Rear Seat belt attachment fitting badly deteriorated |5.1.B.4| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush. |2.4.G.2| | 1 |
| Offside Front Upper Outline marker lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Power steering pipe/hose excessively corroded feed to rack (2.1.5 (g) (i)) | 1 |
| Power steering pipe/hose damaged such that the steering is adversely affected |2.1.5 |g| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by buup rubber |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by bump rubber |6.1.1 |c| |ii|| | 1 |
| Braking system leaking main pipe towards front |3.6.A.1| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush lower bush |2.4.G.2| | 1 |
| Nearside Rear position lamp|s| incorrect colour White Light To Rear |1.1.A.3e| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis under bonnet corroded and holed (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn D bushes (5.3.4 (a) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step/sill holed (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step/sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to s/absorber mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to s/absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill x 2 (6.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush d buah |2.4.G.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Upper Other passenger door catch insecure |6.2.3 |c| |ii|| | 1 |
| Offside Rear Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top strut area-inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount corroded at rear of spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount area corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount corroded at rear of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch area marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch area marked in yellow |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner step area marked in yellow |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch X3 places |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch X4 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring mounting X3 places |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear mounting X3 places |5.3.6 |a| |ii|| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner door arch |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/body |2.4.A.3| | 1 |
| Nearside Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Rear fog lamp has a product on the light source so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step (5.3.6 (a) (i)) | 1 |
| Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Outline marker lamp not working all (4.2.1 (a) (ii)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FRONT PROP SHAFT CENTRE MOUNTING CROSS MENBER |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR CHASSIS VARIOUS MARKED |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings VARIOUS MARKED |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement REAR |2.4.G.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member 2 places |6.1.B.2| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn propshaft |2.4.G.4d| | 1 |
| Body component corroded and likely to cause injury rear buck (6.2.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength doorstep (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep (7.1.1 (a) (i)) | 1 |
| Offside Rear Axle beam distorted |2.5.A.5b| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush mounting bush |2.4.G.2| | 1 |
| Exhaust emits excessive smoke or vapour of any colour white |7.4.B.4| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen bulb fitted incorrectly |4.1.2 |a|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 9.9 M-1 |7.4.B.3b| | 1 |
| Offside Front position lamp|s| not working side and top |1.1.A.3b| | 1 |
| Offside Rear Outer Anti-roll bar attachment bracket/mounting nut missing drop link nut loose |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer/inner sill area |2.4.A.3| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step. (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch near bumper support (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch at front |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch at rear |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded drivers seat mounting |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear bottom of cab |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside rear bottom of cab |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside step |2.4.A.3| | 1 |
| Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
| Central Rear Seat belt buckle missing |7.1.2 |d|| | 1 |
| Emissions not tested could possibly cause engine damage, auxiliary belt issue. |8.2.2.2 |e|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount |5.3.6 |a| |i|| | 1 |
| Front Service brake lagging in operation uneven application (1.2.1 (d)) | 1 |
| Rear Prop shaft bearing housing insecure excessively worn (6.1.7 (f) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Nearside Body component corroded and likely to cause injury inner sill |6.2.1 |a| |i|| | 1 |
| Offside Body component corroded and likely to cause injury inner sill |6.2.1 |a| |i|| | 1 |
| Front Brake pipe fouled by moving parts to rear |3.6.B.2a| | 1 |
| Nearside Rear Brake cable damaged been rubbing on wheel and worn threw |1.1.15 |a|| | 1 |
| Offside Rear Brake cable damaged been rubbing on wheel and worn threw |1.1.15 |a|| | 1 |
| Bonnet primary retaining device ineffective Wont allow bonnet to be opened |3.1 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing near shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by shackle (5.3.6 (a) (i)) | 1 |
| Rear Stop lamp not working 2 |1.2.1b| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quarter (6.1.1 (c) (i)) | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system grabbing severely (1.3.1 (c)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill, c pillar (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill. d pillar (6.1.1 (c) (i)) | 1 |
| Rear Prop shaft bearing excessively worn rear bearing (6.1.7 (b) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to step |6.1.1 |c| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In Front Of Spring Hanger |6.1.B.2| | 1 |
| Centre Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear brake caliper leaking |3.6.A.1| | 1 |
| Nearside Rear Lower Loading door cannot be secured in the closed position door |6.4.1| | 1 |
| Offside Rear Lower Loading door cannot be secured in the closed position door |6.4.1| | 1 |
| Exhaust system insecure Back box rubber (6.1.2 (a)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis to cab (6.1.1 (c) (i)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt cover split |2.2.C.1c| | 1 |
| Nearside Front Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Offside Front Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area strength or continuity significantly reduced Step sill |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Step sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wing /floor |5.3.6 |a| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded through on underside (o/s front)behind front subframe (6.1.1 (c) (i)) | 1 |
| Trailer electrical socket wiring insulation damaged or deteriorated and likely to cause a short-circuit electric socket damaged bad (4.10 (b) (ii)) | 1 |
| Central Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner 1/4 panel |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member spare wheel support |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill |5.3.6 |a| |i|| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced propshaft mounting area (6.1.1 (c) (i)) | 1 |
| Offside Rear Rear position lamp|s| incorrect colour lense broken showing white light |1.1.A.3e| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Door step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/side and N/side rear chassis outer sections corroded in excess above axle |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger to cab (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and under sill (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn n/s & o/s |5.3.4 |a| |i|| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced n/s & o/s inner sill area |7.1.1 |a| |i|| | 1 |
| Front Position lamp not working n/s & o/s (4.2.1 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member,front of spare wheel (5.3.6 (a) (i)) | 1 |
| Rear Shock absorbers has a serious fluid leak n/s & o/s (5.3.2 (b)) | 1 |
| Rear Drive shaft which forms part of the suspension excessively corroded Prop shaft holed with corrosion |2.4.G.4a| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear sill |2.4.A.3| | 1 |
| Nearside Front brake caliper securing device missing caliper bolt missing |3.5.1j| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 1 |
| Front Wheel nut|s| loose Both All wheel nuts |4.2.A.1e| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Hole in chassis |6.1.B.2| | 1 |
| Nearside Front Upper Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings Spring mounting |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings Spring Mounting |6.1.B.2| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. |6.1.1 |c| |i|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp with foot brake |1.4.A.2h| | 1 |
| Offside All position lamps not working marker light |1.1.A.3b| | 1 |
| Nearside All position lamps not working marker light |1.1.A.3b| | 1 |
| Rear Brake hose inappropriately repaired vice grips on hose |3.6.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step area footwell holed and corroded |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded cab mount area prescribed area |5.2.6| | 1 |
| Power steering component|s| leaking at rack area |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area at wheel arch corroded |2.4.A.3| | 1 |
| engine mounting bracket fractured and likely to fail lower panel heavily corroded |6.1.D.1b| | 1 |
| Offside Rear Body component corroded and likely to cause injury quarter |6.2.1 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury quarter |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by alternator |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger - front |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger - front |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger - rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember x 2 places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger - rear - rear |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by crossmember |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper strut top x 2 |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper strut top / inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step / inner sill / outrigger |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step / inner sill |7.1.1 |a| |i|| | 1 |
| Front Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch area/chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded upper inner wing |2.4.A.3| | 1 |
| Nearside Front Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Offside Front Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting drop sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis |5.3.6 |a| |i|| | 1 |
| Prop shaft joint excessively worn rear prop last joint (6.1.7 (c) (i)) | 1 |
| Prop shaft bearing housing insecure front bearing carrier (6.1.7 (f) (i)) | 1 |
| Offside Front Suspension component ball joint likely to become detached lower (5.3.4 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under engine mount (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Floor excessively deteriorated SILL/FLOOR UNDER DOOR STEP (6.2.4 (a) (i)) | 1 |
| Nearside Rear Intermediate drop arm pivot housing casing fixing bolts ineffective bolt worn ,retightend |2.1.2 |c| |i|| | 1 |
| Prop shaft likely to become detached chassis rusted |6.1.7 |a| |ii|| | 1 |
| Prop shaft likely to become detached mount area badly corroded (6.1.7 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced chasis (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor under seat frame |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength prop mount (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre inner sill |2.4.A.3| | 1 |
| Nearside Front Lower Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength centre outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in several places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch in several places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg and sill (6.1.1 (c) (i)) | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill back (6.1.1 (c) (i)) | 1 |
| Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill back (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mount area |2.4.A.3| | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, anchor mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger, anchor mount (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded x2 holes back of o/s/f arch within 30cm of subframe mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer body sill holed |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner body sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis legs behind wheels |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear rear spring mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underbonnet within 30cm of subframe mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch within 30cm of subframe mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting missing D bush clamp (5.3.3 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner wheel arch near gearbox mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill + body panel |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outer + inner step corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer / inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis member |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering 2 places |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member |6.1.A.1| | 1 |
| Nearside Body component damaged and likely to cause injury Mirror back broken (6.2.1 (a) (i)) | 1 |
| Towbar attachment insecure Bolts missing on BOTH sides (6.1.6 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/rear valance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/valance |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS ABOVE AXLE (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS ABOVE AXLE (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH LEAF SPRING MOUNTS (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH LEAF SPRING MOUNTS (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FULL SILL (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCHES BOTH SIDES (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 1 |
| Front Service brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` sun visor |8.3.1e| | 1 |
| Vehicle Identification Number incomplete vin number on dash excessivley damaged |0.2 |b|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step and sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger next to rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x3 all in yellow crayon |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x2 all in yellow crayon |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear mount of spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded brake compensator |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded drivers step |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded floors |2.4.A.3| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Central Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Stop lamp(s) emits other than a steady red light Lamp cluster broken (4.3.3 (a) (ii)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded undersill and inner rear wheelarch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded undersill around rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Lower passenger door catch insecure |6.2.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis above subframe |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill and arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing/ tub |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill and arch |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill all along |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner|wheel arch|chalked area |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area|chalked| |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front/rear inner sill area |chalked| |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill area |6.2.2 |d| |i|| | 1 |
| Fuel system component leaking On engine |7.2.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis rail |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis rail |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Out riggar and inner rear sill |2.4.A.3| | 1 |
| Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger to sill |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both inner arches |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to rear spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step and outer sill |5.3.6 |a| |i|| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded all |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering bump stop area |6.1.A.1| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp and indicator |1.1.A.3f| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger near front leaf spring mounting |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger near rear leaf spring mounting |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced B pillar around catch |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced B pillar around catch |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill
|5.2.6| | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror cover (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panal (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panal (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength corner (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength corner (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner whe
Inner wing also spring mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis runner |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis runner top |2.4.A.3| | 1 |
| Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced around engine mounting. |6.1.1 |a| |i|| | 1 |
| Rear Loading door cannot be secured in the closed position doors do not open |6.4.1| | 1 |
| Nearside Rear Loading door cannot be secured in the closed position loading door |6.4.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step within 30cm of seat belt mount |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing at suspension mount |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing within 30cm of suspension |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases flexible pipe |7.1.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various whole mark with yellow choke |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill in front of wheel |multiple places| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger in front wheel |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired N/S sliding door frame |5.2.6| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired o/s out rigger in front of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired behind wheel |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outrigger behind wheel |6.6.6| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting wheel arch |6.6.6| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded wheel arch |2.2.C.1h| | 1 |
| Front Steering component mounting prescribed area is excessively corroded chassis |2.2.C.1h| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded wheel arch |2.2.C.1h| | 1 |
| Subframe mounting prescribed area is excessively corroded nsr outrigger |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is inadequately repaired rear outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting area |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Position lamp not working on cab (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner chassis leg near to Bulkhead (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area near to abs cable bracket (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn Bar has excessive free play elongated (5.3.4 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting At rear end of cab floor cab box section rotten within prescribed area (6.2.2 (d) (i)) | 1 |
| Front Bumper insecure fixing at front of chassis corroded o/s and n/s (6.1.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet on chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Offside Rear fog lamp emits a light other than red illuminating reverse |1.3.2e| | 1 |
| Offside Stop lamp not working bulkd fitted incorrectly |1.2.1b| | 1 |
| Brake load sensing valve linkage defective and function impaired load vale bent on mounting |3.6.E.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded rear subframe mount to chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded supporting panel/ floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded supporting panel/ floor |2.4.A.3| | 1 |
| Nearside Rear Brake pipe inadequately supported to flexi |3.6.B.1| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded Both rear inner and outer quarter panels |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded both inner and outer Quarter panels |2.4.A.3| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 7.5 recorded 0.68 limit (8.2.2.2 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floorpan joint |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floorpan joint |2.4.A.3| | 1 |
| Nearside Rear Front suspension locking device ineffective Anti-roll bar linkage |2.5.A.4| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch - top mount |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch - top mount |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded INNER STEP X 2 |5.2.6| | 1 |
| Centre Front Power steering pump leaking from a failed seal |2.3.3b| | 1 |
| Nearside Inner Rear Upper Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Dropside cannot be secured in the closed position centre hinge |6.4.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion front of wing |6.1.C.1| | 1 |
| Rear Fuel tank insecure Strap |7.2.1| | 1 |
| Nearside Dropside likely to become detached |6.2.1 |a| |ii|| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill multi holed along boby |6.1.B.2| | 1 |
| Nearside Front Brake pipe fouled by moving parts Near fuel filter. |3.6.B.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis x4 |5.3.6 |a| |i|| | 1 |
| Central Rear Additional braking device inoperative brake compensator |1.5 |b|| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced near to spring hanger |6.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced near to spring hanger |6.1.1 |a| |i|| | 1 |
| Fuel hose leaking injector area |6.1.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to floor |5.3.6 |a| |i|| | 1 |
| Bonnet primary retaining device ineffective bonnet cannot be opened (3.1 (c)) | 1 |
| Offside Rear Leaf spring fractured middle leaf (5.3.1 (b) (i)) | 1 |
| Offside Rear Braking system leaking hub leaking |3.6.A.1| | 1 |
| Prop shaft joint excessively worn centre and rear prop shaft ujs (6.1.7 (c) (i)) | 1 |
| Offside Rear Stop lamp emits other than a steady red light lens damaged |1.2.1e| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outersill inner sill and door step |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/inner sill and doorstep |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and suspension turret |2.4.A.3| | 1 |
| Rear Rear fog lamp flickers when tapped lightly by hand |1.1.6d| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/ step |6.2.2 |d| |i|| | 1 |
| Hazard warning switch faulty only operates the nearside indicators |1.4.B.1d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis cross member near anti roll bar drop link |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement arm inner rear bush |2.4.G.2| | 1 |
| Nearside All position lamps not working sidemarkers |1.1.A.3b| | 1 |
| Offside All position lamps not working sidemarkers |1.1.A.3b| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking filter area (6.1.3 (b) (i)) | 1 |
| Exhaust emissions exceed manufacturer`s specified limit plate limit 0.68 1/m |8.2.2.2 |a|| | 1 |
| Nearside Front Bumper insecure bumper corner loose (6.1.4 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn wear in n/s front bottom ball joint (5.3.4 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides 2nd to rear crossmember |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/ step |6.1.B.2| | 1 |
| Front Fuel tank insecure strap excessively corroded |7.2.1| | 1 |
| Offside Outer Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc Front outer |2.5.C.1a| | 1 |
| Offside Parking brake inoperative on one side very low performance |1.4.1 |a|| | 1 |
| Nearside Front Upper Outline marker lamp not working roof marker |4.2.1 |a|| | 1 |
| Offside Body component corroded and likely to cause injury tailboard bracket jagged edge and insecure |6.2.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength upper chassis areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front end spring mount cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount cross member |5.3.6 |a| |i|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member 30cm prop mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Driver`s door hinge insecure lower hinge broken away from pillar |6.2.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing area |6.1.C.1| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre cross member both sides |front and rear of member| |2.4.A.3| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement FRONT END OF SPRING |2.4.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded INNER LOWER STEP 30 CM OF SEAT MOUNT |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step, sill & outrigger |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sills & step |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sills & step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting back panel |6.1.6 |i| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded step/floor/outrigger |5.2.6| | 1 |
| Nearside Brake cable insecure cable fouling on wheel |3.5.1d| | 1 |
| Torsion bar excessive play at an end fixing |2.4.E.2| | 1 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides |6.1.B.2| | 1 |
| Rear position lamp|s| insecure both |1.1.A.3a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured Around load sensing valve! |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6| | 1 |
| Nearside Front Macpherson strut likely to become detached |5.3.3 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear off seat |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D-BUSH (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D-BUSH (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind drivers seat |7.1.1 |a| |i|| | 1 |
| Towbar locking device missing tow elec socket |6.6.3b| | 1 |
| Towbar component insecure elec socket |6.6.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear second x member |6.1.B.2| | 1 |
| Headlamp aim projected beam image is obviously incorrect nearside + offside (4.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn axle bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn axle bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Brake disc significantly and obviously worn badly corroded (1.1.14 (a) (i)) | 1 |
| Offside Front Brake disc significantly and obviously worn badly corroded (1.1.14 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn rubber coming out of sleeve (5.3.4 (a) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired outer sill |6.2.2 |d| |ii|| | 1 |
| Nearside Front Bumper insecure behind wing |6.1.4 |a| |i|| | 1 |
| Offside Front Bumper insecure behind wing |6.1.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel-arch inner |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step / floor |6.2.2 |d| |i|| | 1 |
| Rear Body insecure and dangerous to other road users floor holed |6.1.B.1b| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and rear body floor corroded/holed |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine cross member (6.1.1 (c) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch o/s (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength sill front mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength sill front mounting (5.3.6 (a) (i)) | 1 |
| Front Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill To Step |5.2.6| | 1 |
| Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Body has a sharp edge caused by corrosion tipper body and cab |6.1.C.1| | 1 |
| Subframe mounting prescribed area is excessively corroded both front chassis rails |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion nearside and offside front |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear |6.1.B.2| | 1 |
| Front Front suspension has excessive play in a lower suspension ball joint both |2.5.B.1a| | 1 |
| Offside Front Inner Brake prescribed area is excessively corroded Chassis where flexi meets rigid (1.1.21 (e) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by damage mirror back |6.1.C.1| | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror back missing |6.2.1 |a| |i|| | 1 |
| Nearside Front Stub axle inappropriately repaired |2.4.A.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill/step |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel well |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor x3 |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step aera |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sill aera |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shocker top aera |6.1.B.2| | 1 |
| Offside Front Floor excessively deteriorated cab floor to inner wing |6.2.4 |a| |i|| | 1 |
| Offside Rear Steering linkage fouling fouling brake hose |2.1.4 |a|| | 1 |
| Rear Floor in such a condition it is likely to cause load insecurity or instability tipper body holed corroded |6.2.4 |a| |ii|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Body panel corroded and likely to cause injury x 2 |6.2.1 |a| |i|| | 1 |
| Brake pedal pivot has excessive wear or free play |1.1.1 |b|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body holed
|6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear sills |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (engine bay) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in 5 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in 2 places (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross members x 2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch in 3 places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arches 3 places (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting stepsill (6.2.2 (d) (i)) | 1 |
| Fuel tank insecure both fuel tank straps broken |6.1.3 |a| |i|| | 1 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt cover split |2.2.C.1c| | 1 |
| Nearside Front Anti-roll bar linkage insecure drop link, insecure |2.4.G.1| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wing (6.2.2 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i)) | 1 |
| Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement 2 sides |2.4.G.2| | 1 |
| Brake cable insecure INTO O/S/R BACKPLATE |3.5.1d| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded AT STEERING RACK |2.3.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear spring mount / crossmember |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s door step |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near tow bar |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward and rear mountings |areas| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward and rear mountings |areas| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member by leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Areas of front and rear spring hangers and chassis leg in between (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Areas of spring hangers front and rear and chassis legs in between (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill panels also front and rear chassis out riggers (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill panels and front and rear out riggers (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch areas and chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner wheel arch areas and chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Lower face of front rail (6.1.1 (d) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired Wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Around spring fixings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Around spring fixings (5.3.6 (a) (i)) | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Passenger step / inner sill , marked |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger. |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chrossmember |6.1.B.2| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded Chassis rail |engine mouting area| |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is severely distorted |3.3.A.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp affecting all offside rear lights |1.1.A.3f| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp affecting all nearside rear lights |1.1.A.3f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis on outside |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill outrigger area |2.4.A.3| | 1 |
| Nearside Front Braking system leaking pipe to hose |3.6.A.1| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release inner seat |5.2.5a| | 1 |
| Nearside Emergency exit door cannot be opened from outside the vehicle sliding door |9.1.2 |a|| | 1 |
| Rear Emergency exit door cannot be opened from outside the vehicle |9.1.2 |a|| | 1 |
| Nearside Entrance/exit step in such a condition as to affect the stability of passengers during use |9.7 |a| |iii|| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced understep for front and sliding doors |6.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section |5.3.6 |a| |i|| | 1 |
| Nearside Rear All position lamps light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Nearside rear brake grabbing severely |3.8.A.5b| | 1 |
| Rear Position lamp showing white light to the rear both damaged (4.2.3 (a) (ii)) | 1 |
| Rear Leaf spring shackle pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Nearside Rear Leaf spring seriously weakened broken (5.3.1 (b) (i)) | 1 |
| Windscreen wiper not working operation stalk missing (3.4 (a)) | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S AND N/S CHASSIS OUTRIGGERS AT REAR SHOCK MOUNTS |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded CHASSIS OUTRIGGERS AT REAR SPRING HANGERS |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S REAR CHASSIS LEG HOLED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S AND N/S REAR CHASSIS AT REAR BUMP STOPS |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings AT Front Spring Hanger |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil complete |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sil |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired cab rear x member |5.2.6| | 1 |
| Offside All position lamps not working rear side marker down body. |1.1.A.3b| | 1 |
| Nearside Brake cable insecure handbrake cable fouling on rear wheel. |3.5.1d| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt balljoint dust cover. |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x member & chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x member& chassis |2.4.A.3| | 1 |
| Offside Front brake caliper has restricted free movement brake binding |3.5.1k| | 1 |
| Body insecure and dangerous to other road users front bumper insecure |6.1.B.1b| | 1 |
| Rear Statutory seat belt missing no access to them |5.1.1| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear most bush |2.4.G.2| | 1 |
| Rear Seat belt buckle missing all |7.1.2 |d|| | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill back |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under quarters/out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under quarters/outriggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower quarter behind bumper |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 1 |
| Front Seat belt buckle missing middle |7.1.2 |d|| | 1 |
| Offside Rear Lower Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Front Position lamp not working n/s and o/s (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured at front mounting |5.3.1 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mountings front and rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber upper mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded compensator mounting |1.1.21 |e| |i|| | 1 |
| Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both leaking grease |2.2.C.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasise |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasise |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength next to leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis over rear axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill next to leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear crossmember (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to shock absorber mount (5.3.6 (a) (i)) | 1 |
| Lower Intermediate drop arm insecure |2.2.B.1a| | 1 |
| Nearside Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 1 |
| Offside Front Brake hose excessively twisted bracket not bolted on (1.1.12 (b) (ii)) | 1 |
| Position lamp not working both front |4.2.1 |a| |ii|| | 1 |
| Offside Rear position lamp|s| incorrect colour broken |1.1.A.3e| | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear wheel arches |6.1.B.2| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement both front wishbone rear bushes |2.4.G.2| | 1 |
| Nearside Rear Leaf spring main leaf fractured front spring eye |5.3.1 |b| |ii|| | 1 |
| Offside Rear Leaf spring main leaf fractured front eye of spring |5.3.1 |b| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected several places |5.3.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner bay |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings SILL CORNER DAMAGED |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FOOT STEP TO SILL |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering REAR VALLANCE CORRODED IN SEVERAL PLACES |6.1.A.1| | 1 |
| Offside Rear Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Central Rear Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Central Front Engine mounting fractured corroded (6.1.8 (a) (ii)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember (1.1.21 (e) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D |2.4.G.2| | 1 |
| Nearside Side repeater likely to become detached |4.4.1 |c| |ii|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid rear n/s hub very wet suspect brake fluid leak due to brake reading |3.6.A.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch marked with chalk |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch all area marked with chalk |2.4.A.3| | 1 |
| Driver`s seat insecure bolts missing at front |6.2.A.1| | 1 |
| Front Upper Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings both side of chassis behind cab are cracked |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch corrosion within 30cm of suspension component |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front inner sills rust holes |6.1.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp BOTH REAR LIGHT UNITS FAULTY INCORRECT |1.1.A.3f| | 1 |
| Offside Front Lower Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded CHASSIS/INNER WHEEL ARCH |2.2.C.1h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eyelet chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring eyelet chassis section |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis sections |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded front chassis |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded COMPENSATOR MOUNTING/CHASSIS CORRODED |3.3.A.2| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis near rear shocker |2.4.A.3| | 1 |
| Electrical wiring insecure o/s chassis rail |1.9.2a| | 1 |
| Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings UNDERSIDE DOORSTEP |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Offside Body component damaged and likely to cause injury Mirror covers missing/damaged (6.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt buckle not functioning as intended Not releasing (7.1.2 (d)) | 1 |
| Rear Floor in such a condition it is likely to cause load insecurity or instability Body (6.2.4 (a) (ii)) | 1 |
| Nearside Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Speedometer clearly inoperative needle jumps around on idle and speed goes up when engine revved (7.8 (b) (ii)) | 1 |
| Rear Parking brake inoperative on one side Both (1.4.1 (a)) | 1 |
| Parking brake lever inoperative Cable Snapped (1.1.6 (d)) | 1 |
| Nearside Rear Rear wheel steering ball joint has excessive play |2.2.B.1i| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis cross member within 30cm of anti roll bar link mount |2.4.A.3| | 1 |
| Nearside Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength lower (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength upper (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn inner (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Bumper insecure (6.1.4 (a) (i)) | 1 |
| Nearside Front Body component insecure on tail lift front (6.2.1 (a) (i)) | 1 |
| Outline marker lamp missing ALL (4.2.1 (a) (ii)) | 1 |
| Rear Service brake effort inadequate at a wheel BOTH (1.2.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn BOTH [D] LINK BUSHES (5.3.4 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength above front mounts inner (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength above front mounts inner (5.3.6 (a) (i)) | 1 |
| Offside Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner backing sill/under doorstep area holed, complete (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under doorstep area/sill distorted and holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under bonnet |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine cradle |6.1.1 |c| |i|| | 1 |
| Service brake lagging in operation both front |1.2.1 |d|| | 1 |
| Front position lamp|s| not working both front upper lamps |1.1.A.3b| | 1 |
| Bonnet primary retaining device ineffective wont open under bonnet items not checked (3.1 (c)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Centre Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement WISHBONE BUSHES BOTH SIDES. |2.4.G.2| | 1 |
| Stop lamp not working ALL. |1.2.1b| | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH INNER SILLS AND STEPS. (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL AREA. (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH INNER WHEEL ARCHES. (6.1.1 (c) (i)) | 1 |
| Offside Rear Front position lamp|s| adversely affected by the operation of another lamp /indicator/fog |1.1.A.3f| | 1 |
| Central Exhaust has a major leak of exhaust gases underside |7.1.2| | 1 |
| Central Exhaust system not adequately supported underside |7.1.1| | 1 |
| Anti-roll bar rubber mounting deteriorated resulting in excessive movement both rear `d` bushes
|2.4.G.2| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked front and rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as market front |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked offside and nearside |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced as marked door step inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis holed and corroded within 30cms of front suspension mount (5.3.6 (a) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near shocker |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking on axle x2 flexi hoses |3.6.A.1| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release drivers reciever sticking |5.2.5a| | 1 |
| Emissions not tested filled workshop with smoke |7.3.A.1| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view door /wing |8.1.2a| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded floor / chassis area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis / outrigger | spring hanger area| |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing /strut top mounting |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing under arch |2.4.A.3| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near fuel tank |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength crossmember |2.4.A.3| | 1 |
| Rear reflector not facing the rear |1.5.1a| | 1 |
| Headlamp not working on main beam both sides and turns off dipped beam (4.1.1 (a) (ii)) | 1 |
| Centre Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis adjacent shock absorber |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion mid |6.1.C.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded underside of sill /step |2.4.A.3| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Macpherson strut insecurely attached |5.3.3 |a| |i|| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside front and rear, rear spring mounting areas excessively corroded. marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILLS ROTTEN |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings MOUNTING ROTTEN |6.1.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened spring hanger |5.3.1 |b| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch has hole and body |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch inner sill and rear body and rear inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis |5.3.6 |a| |i|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.87% |7.4.B.3b| | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced front cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg, floor pan to wheel arch and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill, chassis leg |2.4.A.3| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush Both sides |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Corroded next to rear spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Body structure (front mounting) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Body structure (rear mounting) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Body structure (front mounting) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Body structure (rear mounting) (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt ALSO HAS PLAY IN BALL JOINT (5.3.4 (b) (ii)) | 1 |
| Central Prop shaft likely to become detached prop shaft centre mounting split (6.1.7 (a) (ii)) | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) inner tie rod (2.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis above rear axle |5.3.6 |a| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2 places (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2 places (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills |6.1.1 |c| |i|| | 1 |
| Offside Rear Shock absorbers damaged to the extent that it does not function |5.3.2 |b|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded footwell |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both cabsteps |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner and outer sills front to rear |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by fuel tank |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat base |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x2 |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking no 4 injector |6.1.3 |b| |i|| | 1 |
| Rear Exhaust system not adequately supported rea bracket support broken |7.1.1| | 1 |
| Offside Rear Other passenger door hinge insecure |6.2.3 |c| |ii|| | 1 |
| Offside Driver`s door cannot be opened from outside the vehicle door handal |6.2.3 |a|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front spring hanger |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front step |6.2.2 |d| |i|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear spring mount |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear spring mount |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear front leaf spring mount |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear front leaf spring mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside outer sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear inner arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear inner arch |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step sill inner |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill and inner sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rear panel |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassey out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of sill x2 (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii|| | 1 |
| Rear Bumper damaged and likely to cause injury when grazed or contacted also corroded |6.1.4 |a| |i|| | 1 |
| Nearside Rear position lamp|s| missing outline marker |1.1.A.3a| | 1 |
| Offside Front brake disc modified and seriously weakened inner face |3.5.1n| | 1 |
| Fuel tank insecure broken |7.2.1| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush Forward Bush |2.4.B.2| | 1 |
| rear brake recording little or no effort Both Sides |3.7.B.5a| | 1 |
| Offside Front Seat belt retracting mechanism defective unable to pull belt from reel |7.1.2 |e|| | 1 |
| Nearside Rear Electrical wiring inadequately supported wiring harness/junction box close to rear spring |1.9.2a| | 1 |
| Nearside Anti-roll bar linkage insecure drop link lower joint nut loose and hole in anti-roll bar enlarged |2.4.G.1| | 1 |
| Nearside Vehicle structure has a fracture which adversely affects braking or steering behind cab crack |6.1.A.1| | 1 |
| Offside Vehicle structure has a fracture which adversely affects braking or steering behind cab has crack |6.1.A.1| | 1 |
| Offside Driver`s door cannot be opened from outside the vehicle handle missing , other means not adequate |6.2.B.1b| | 1 |
| Rear position lamp|s| not working all and lenses lamps damaged |1.1.A.3b| | 1 |
| Offside Stop lamp not working lamp inadequate visibility |1.2.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear shackle (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced foot well area (7.1.1 (a) (i)) | 1 |
| Offside Front Steering column retaining device insecure |2.1.6| | 1 |
| Central Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
| Central Front Hazard warning switch faulty |1.4.B.1d| | 1 |
| Front Vehicle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Stop lamp|s| not working connection |4.3.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of top strut mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of top strut mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Within 30cm lower seat belt mount (7.1.1 (a) (i)) | 1 |
| Nearside Body has a sharp edge caused by corrosion sliding door |6.1.C.1| | 1 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill near step |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has 2 holes |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch has a hole |6.1.B.2| | 1 |
| Centre Rear Suspension spring mounting prescribed area is fractured x member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured chassis inner and outer |2.4.A.3| | 1 |
| Direction indicator adversely affected by the operation of another lamp both rear |1.4.A.2h| | 1 |
| Centre Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded middle inner sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded middle inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch to chassis rail |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded rear of wheel arch |2.4.A.3| | 1 |
| Centre Seat belt retracting mechanism defective passenger |5.2.5b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both when hazard or indicators on |1.1.A.3f| | 1 |
| brake disc in such a condition that it is seriously weakened both front very badly scored |3.5.1i| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch/sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch/sill (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill near sliding door |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill near rear wheel |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill as marked |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill near real wheel |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 3X patches as marked |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step as marked |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced chassis |6.1.1 |b| |ii|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced chassis |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure is deformed and structural rigidity is significantly reduced wheel arch box |6.1.1 |a| |i|| | 1 |
| Rear Towbar coupling indicator not working (6.1.6 (e)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill patches as marked |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch as marked |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch as marked |6.1.1 |c| |i|| | 1 |
| Offside Front Driver`s seat insecure seat runners worn |6.2.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis, shock absorber mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, shock absorber mounting. |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings MARKED YELLOW |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole by towing bracket |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear ,front spring hanger mounting chassis section holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear , front spring hanger mounting chassis holed |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed by fuel tank |6.1.B.2| | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle handle broken |6.2.B.1b| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle sliding door handle broken |6.2.B.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch panel to floor insecure through rust |6.1.B.2| | 1 |
| Brake load sensing valve linkage seized (3.6.E.3) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to step (6.1.B.2) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step (6.1.B.2) | 1 |
| Nearside Front front brake binding (3.7.B.1) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bulk head to arch (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides outer sill and inner (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides body outrigger to steps (6.1.1 (c) (i)) | 1 |
| Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d) | 1 |
| Offside Rear Body component corroded and likely to cause injury sharp edges on rear bumper weld up (6.2.1 (a) (i)) | 1 |
| Nearside Rear Brake valve insecure lever seized free off limit valve (1.1.7 (c)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Next to fuel tank |5.2.6| | 1 |
| Offside Front Position lamp not working sidelight nw (4.2.1 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside door step (seatbelt mounted to seat) (7.1.1 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Both rear inner valances/outriggers (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Nearside of rear crossmember (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear floorpans and inner wheelarches badly corroded (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSR inner wheelarch/floorpan (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front of both rear inner wheelarches (5.3.6 (a) (i)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer face of OSF chassis (5.3.6 (a) (i)) | 1 |
| Headlamp aim projected beam image is obviously incorrect nearside |4.1.2 |c|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen nearside beam image incorrect |4.1.2 |a|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside door pillar |7.1.1 |a| |i|| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength offside rear spring forward mounting outrigger |5.3.6 |a| |i|| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner valance |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear chassis inner face |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear chassis outer face |5.3.6 |a| |i|| | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wheel arch |5.3.6 |a| |i|| | 1 |
| Service brake grabbing severely nearside rear and offside rear |1.2.1 |c|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner flitch area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner flitch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch to floor shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner arch shock absorber mount area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor step |5.2.6| | 1 |
| Fuel cap/sealing device missing fuel cap missing |7.2.4a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing holed sharp edges |6.1.C.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front eye (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring front mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and support outrigger front end of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis 30 cm suspension mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and support outrigger front end of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wing 2 places (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner back panel rear end of spring (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner sills front end of rear springs (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both chassis rails 30cm shock absorber mount (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both floor body seams 30cm shock mount (5.3.6 (a) (i)) | 1 |
| Rear Body component corroded and likely to cause injury step (6.2.1 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired sill repaired with filler (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired sill repaired with filler (5.3.6 (a) (i)) | 1 |
| Rear position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
| Offside Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 1 |
| Offside Rear Shock absorber detached |2.6.2b| | 1 |
| Hazard warning tell tale not working correctly |1.5.4c| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor seat mount |5.2.6| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both sides d-bushes |2.4.G.2| | 1 |
| Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint insecure where fastened to hub |2.4.G.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting footwell of step |6.2.2 |d| |i|| | 1 |
| Nearside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch and floor |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i)) | 1 |
| Oil leaking excessively from engine fuel filter leaking |8.4.1 |a| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill all marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill all marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill all marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill all marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter marked yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut top/inner wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut top / inner wheel arch (6.2.2 (d) (i)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Front position lamp|s| not working ON TOP |1.1.A.3b| | 1 |
| Nearside Front Upper Front position lamp|s| not working ON TOP |1.1.A.3b| | 1 |
| Offside Rear Outer Rear position lamp|s| not working RED |1.1.A.3b| | 1 |
| Nearside Rear Outer Rear position lamp|s| not working RED |1.1.A.3b| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp FLASHES TAILLIGHT NOT INDICATOR |1.4.A.2h| | 1 |
| Bonnet retaining device ineffective NOT FITTED |8.4.2| | 1 |
| Fuel cap/sealing device missing NO CAP |7.2.4a| | 1 |
| Brake load sensing valve linkage obviously incorrectly adjusted MISSING |3.6.E.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Both inner wheel arches |2.4.A.3| | 1 |
| Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement BOTH SIDES |2.4.G.2| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill x2 |6.1.1 |c| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounts x2 patches |7.1.1 |a| |i|| | 1 |
| Offside Front Steering linkage ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis rail in engine bay in front of engine mount and on outside of chassis rail |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases front flexi |7.1.2| | 1 |
| Nearside Front Outer Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both seals corroded |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis has corrision |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill & step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back mount |2.4.A.3| | 1 |
| Front Seat belt locking mechanism does not secure or release centre |5.2.5a| | 1 |
| Seat belt retracting mechanism defective front centre (7.1.2 (e)) | 1 |
| Exhaust has a major leak of exhaust gases rear section |7.1.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill 2 small holes |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside step |6.1.B.2| | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle door handle broken |6.2.B.1b| | 1 |
| Nearside Front Body has a sharp edge caused by damage door handle broken |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases middle box | second box | |7.1.2| | 1 |
| Offside Front Brake pipe inadequately supported under bonnet and behind engine |3.6.B.1| | 1 |
| Nearside Body has a sharp edge caused by damage load door |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by damage reflector |6.1.C.1| | 1 |
| Exhaust emits excessive smoke or vapour of any colour black 9.99m-1 |7.4.B.4| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch corr/holed |2.4.A.3| | 1 |
| Nearside Front Headlamp adversely affected by the operation of another lamp with dipped beam |1.7.5c| | 1 |
| Rear Exhaust has a major leak of exhaust gases pipe split |7.1.2| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded outer sill/wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch - multi holes |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded edge of cargo floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear part of inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded part of box section of chassis near front most leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring |6.1.B.2| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded Front |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded arch x2 |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill foot step |5.2.6| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip missing (6.1.7 (g) (ii)) | 1 |
| Offside Rear Body insecure and dangerous to other road users mudflap |6.1.B.1b| | 1 |
| Nearside Body has a sharp edge caused by damage body behind side door. |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater incorrect colour Lens missing |1.4.A.2f| | 1 |
| Nearside Rear Axle with loose fixing bolts |5.1.1 |b| |i|| | 1 |
| Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Fluid leaking continuously posing a serious risk to road safety diesel leak (8.4.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases front pipe (6.1.2 (a)) | 1 |
| Rear brake drum contaminated by oil |3.5.1h| | 1 |
| Power steering ram|s| anchorage insecure |2.3.4a| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement wishbone |2.4.G.2| | 1 |
| Nearside Front Outer Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Offside Front Inner Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Offside Front Outer Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front inner wheel arch corroded. (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis corroded. (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top area |5.3.6 |a| |i|| | 1 |
| Exhaust system not adequately supported Rubbers & clamp |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis & undersill areas front & rear of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis & undersill rear of spring |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by corrosion Tipper body step |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings iiner sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded and hole (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear wheel arch corroded and holed (5.3.6 (a) (i)) | 1 |
| Horn not working replace fuse (7.7 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer seal close to shock absorber top mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill and surrounding areas not repaired fully (several areas all highlighted (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member by spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired sill/inner wheel arch and surrounding area (areas highlighted) (5.3.6 (a) (i)) | 1 |
| Central Rear Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis rail in N/S/F Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail holed and corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drivers step and inner & outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Front of rear wheel/Inner and outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front of rear wheel/Inner and outer sills |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch areas |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis rail |3.3.A.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Rear of wheel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Rear of wheel |2.4.A.3| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill under step area (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (various places) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear panel area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength CENTRE CROSSMEMBER 30CM FRONT LEAF SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS IN ENGINE BAY (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING (5.3.6 (a) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill under side loading door |6.1.B.2| | 1 |
| Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both track rod ends |2.2.C.1c| | 1 |
| Emissions not tested lack of oil (8.2.2.2 (e)) | 1 |
| Offside Rear Rear position lamp|s| incorrect colour showing white |1.1.A.3e| | 1 |
| Offside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement front bush |2.4.B.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush both rear axle mounts |2.4.G.2| | 1 |
| Nearside Body has a sharp edge caused by damage MIRROR |6.1.C.1| | 1 |
| Nearside Front Lower Body panel corroded and likely to cause injury sill corroded in 2 x places (6.2.1 (a) (i)) | 1 |
| Emissions not tested oil leak/starting issues (8.2.2.2 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded swing shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded swing shackle mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under body area to crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to sill backing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch to sill backing area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer sill member |2.4.A.3| | 1 |
| Driver`s seat moving inadvertently runner / rail collapsing |6.2.5 |b| |ii|| | 1 |
| Steering system excessively rough steering locking jamming up intermittently |2.1.1 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer step/sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step - sub frame |5.3.6 |a| |i|| | 1 |
| Prop shaft bearing housing fractured centre |rubber bush| bearing housing |6.1.7 |f| |i|| | 1 |
| Loading door cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swing shackle mount (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Outer Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Service brake excessively binding suspected caliper siezed (1.2.1 (f)) | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear bumper |6.6.6| | 1 |
| Rear Wheel bearing has excessive play Both (5.1.3 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Headlamp levelling device obviously defective |1.7.2| | 1 |
| Nearside Outer Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Rear Body has a sharp edge caused by damage |Light Unit| |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns+os rear wheel arches and floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded multiple places,front and rear of spring |2.4.A.3| | 1 |
| Offside Front Upper Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| All position lamps adversely affected by the operation of another lamp side lights come on with brake lights |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp brake lights come on with side lights |1.2.1f| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill in two places |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings OUTER CHASSIS CRACKED/CORRODED |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded OUTER SILL HOLED |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded OUTER SILL HOLED & CORRODED TO EXCESS |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded CENTRE OUTER SILL HOLED & CORRODED |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded CENTRE INNER SILL HOLED & CORRDODED |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/ box section (7.1.1 (a) (i)) | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb |1.8.A.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area under the vehicle at the spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill and outer sill behind the bumper area under the vehicle at the rear spring mounting area. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill area under the vehicle at the rear spring mounting area. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch are for the suspension strut mounting. (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Ball joint has excessive play steering rack |2.2.B.1f| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innere wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded front inside the wheel arch |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded rear spring mounting inside the wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded front inside the wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing to chassis |3.6.C.3| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab holed (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed (6.2.2 (d) (i)) | 1 |
| Bonnet primary retaining device ineffective cannot be opened (3.1 (c)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step inner |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back of rear wheel |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back of rear wheel |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides outer riggers |6.2.2 |d| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to arch next to axel |6.1.B.2| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear wishbone bush (5.3.4 (a) (i)) | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp top lamps are fog lamps [to bright] |1.1.A.3f| | 1 |
| Offside Front All outline marker lamps not working Rear body |4.2.1 |a|| | 1 |
| Offside Front Outline marker lamp missing |4.2.1 |a|| | 1 |
| Anti-roll bar pin or bush excessively worn rear d bushes x2 (5.3.4 (a) (i)) | 1 |
| Offside Rear Rear position lamp|s| not working Marker Light |1.1.A.3b| | 1 |
| Offside Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings by shock |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings by load valve |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and 1/4 panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member and 1/4 panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mounting and out rigger |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S inner arch corroded and holed |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S inner sill corroded and holed near mounting point |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by outer sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4 panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4 panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch to floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch to floor (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch area |5.3.6 |a| |ii|| | 1 |
| Front Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Nearside brake disc has restricted free movement |3.5.1j| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both inner d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Front Valve stem seriously damaged perished (5.2.3 (j)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch by top mount marked yellow (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d-bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill slight corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings insides wheel arch |6.1.B.2| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect LED bulb fitted (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect LED bulb fitted (4.1.2 (c)) | 1 |
| Rear Brake load sensing valve linkage defective and function impaired Rod missing (1.1.17 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill.By leaf spring front hanger (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body all over |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body all over |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar insecure droplink |2.4.G.1| | 1 |
| Nearside Rear Upper Leaf spring eye defective |anchor| |2.4.B.1b| | 1 |
| Offside Rear Upper Leaf spring eye defective |anchor| |2.4.B.1b| | 1 |
| Offside Front Body has a sharp edge caused by corrosion BUMPER CONER |6.1.C.1| | 1 |
| Nearside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| rear brake recording little or no effort OSR brake performance poor |3.7.B.5a| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal going into steering rack |2.3.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear not fully seam wellded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anchor mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mount area / rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mount area/ outriger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Front Cab steps ring so insecure it is likely to cause injury corroded and holed |6.2.8 |a| |ii|| | 1 |
| Nearside Front Track rod end ball joint has excessive play new joint fitted |2.2.B.1f| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced fuel tank mount & chassis (6.1.1 (c) (i)) | 1 |
| Rear Prop shaft joint excessively worn retaining bolt & lock tab missing (6.1.7 (c) (i)) | 1 |
| Central Prop shaft joint excessively worn retaining bolt insecure (6.1.7 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/suspension |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill + arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/b valve |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at cross member |2.4.A.3| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 1/4 panel and outrigger (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel/chassis (6.1.1 (c) (i)) | 1 |
| Nearside Outer Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer seal |6.1.B.2| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Rear |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/step (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both |2.4.G.2| | 1 |
| Body insecure and dangerous to other road users body bolts loose |6.1.B.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner Arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Arch |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.34% |7.4.B.3b| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint join to rack |2.3.3b| | 1 |
| Offside Front Front suspension has excessive play in a track control arm inner bush bad |2.5.B.2b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering under sill outer sill spring outrigger |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering under sill |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings FLOOR TO SILL SERIOUSLY CORRODED |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings FLOOR TO SILL |6.1.B.2| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings DOOR FOOTWELL |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is fractured door latch
|5.2.6| | 1 |
| Brake fluid warning lamp inoperative flickering on and off doesnt work when handbrake on |3.6.G.2| | 1 |
| Windscreen wiper not working both side |3.4 |a|| | 1 |
| Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal both side |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheal arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.1 |c| |ii|| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn prop bearing |2.4.G.4d| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outtrigger |5.3.6 |a| |i|| | 1 |
| Prop shaft securing bolt missing gear box end |6.1.7 |a| |i|| | 1 |
| Brake servo vacuum pipe excessively chafed |3.6.C.1b| | 1 |
| Offside front parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Nearside Rear Direction indicator incorrect colour brocken |1.4.A.2f| | 1 |
| Nearside Front Body has a sharp edge caused by damage outer wing mirror casing. |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion outer wing corroded. |6.1.C.1| | 1 |
| Offside Front obligatory indirect vision device insecure sunvisor |8.1.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil corroded in two places. |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner rear |2.4.G.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both arch near leaf spring |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nsf chassis member (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nsf inner wheel arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Osf inner wheel arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Osr chassis member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked white (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked white (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked white (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet marked white (6.1.1 (c) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit limit = 1.19 (8.2.2.2 (a)) | 1 |
| Offside front brakes release unevenly slow |3.7.B.4| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear eye |2.4.A.3| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded front eye |2.4.A.3| | 1 |
| Nearside Rear Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Rear Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| All direction indicators not working all |4.4.1 |a| |ii|| | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under body sill (5.3.6 (a) (ii)) | 1 |
| Offside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected door step (5.3.6 (a) (ii)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected flitch (5.3.6 (a) (ii)) | 1 |
| Headlamp are incorrectly positioned (4.1.4 (a)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn d bushes |5.3.4 |a| |i|| | 1 |
| Offside Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Lower engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
| Rear Brake valve leaking Brake load sensing valve |3.6.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch by shock |6.1.B.2| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings underside by front seat bolts |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside, sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside lower sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
| Nearside Rear Outer Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hangers both (5.3.6 (a) (i)) | 1 |
| Central Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind bumper near cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind bumper near x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch / floor pan |2.4.A.3| | 1 |
| Brake performance not tested due to pipe leaking (1.2.1 (g)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch outrigger (5.3.6 (a) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner corner (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis face (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front subframe offside front mounting |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear spring front mounting |5.3.6 |a| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill step (6.2.2 (d) (i)) | 1 |
| Centre Front Upper Fuel pipe leaking top of engine |7.2.3| | 1 |
| Nearside Outer Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mount as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner seal in number vof places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded seal in number of places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor / inner wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing / out-rigger area |2.4.A.3| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis by steering rack |2.2.C.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floorpan/lower wheel arch |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch rear of |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch complete |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch complete |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill mounting |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step floor |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section to front of frame (5.3.6 (a) (i)) | 1 |
| Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Nearside Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer chassis rail |2.4.A.3| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced interaction from indicator |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember / chassis area |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shocker top mount |2.4.A.3| | 1 |
| Central Front drive shaft coupling bearing fastener fractured |2.5.C.2b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step underside |5.2.6| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner cill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Wheelarch and floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheelarch and floor |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded centre chassis member |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded centre chassis member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor panel |2.4.A.3| | 1 |
| Centre Front Body has a projection caused by damage |6.1.C.1| | 1 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn support rubber |2.4.G.4d| | 1 |
| Offside Outer Rear Seat belt flexible stalk cable has broken strands |5.2.4b| | 1 |
| Offside Front Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Power steering component|s| leaking pipe on rack |2.3.3b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp ALL REAR LIGHTS |1.1.A.3f| | 1 |
| Seat belt anchorage prescribed area is excessively corroded BOTH FRONT INNER STEPS/SILLS |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded N/S REAR OUTER SILL, BOTH REAR INNER SILLS, N/S REAR OUTRIGGER, O/S REAR OUTRIGGER, N/S REAR CHASSIS LEG INNER AND OUTER, O/S REAR CHASSIS LEG |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded BOTH FRONT SUSPENSION STRUT TOPS |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill |6.2.2 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded and functionality of the braking system is affected |1.1.21 |e| |ii|| | 1 |
| Brake performance not tested Due to condition of Rear Chassis Corrosion |1.2.1 |g|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened marked in yellow |2.4.B.6d| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened marked in yellow |2.4.B.6d| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting corroded marked in yellow |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Towbar excessively corroded within 30cm of towbar mounting chassis |6.1.6 |i| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount on chassis (5.3.6 (a) (i)) | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected handbrake mount on chassis (1.1.21 (e) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked with yellow chalk from outside. |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg ,marked with yellow chalk from outside. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger, marked with yellow chalk. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop area, marked with yellow chalk. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear valance |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings o/s inner sill by rear spring front eye ,welding only spot welded |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner valance |6.1.B.2| | 1 |
| Rear Exhaust system not adequately supported on joint |7.1.1| | 1 |
| Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch (5.3.6 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected emitting white light |4.4.1 |b| |ii|| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting Mounting bolt missing and chasis member corroded |6.1.6 |i| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill in front of wheel |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Cab step |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Cab step |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Electrical wiring insecure battery cable |1.9.2a| | 1 |
| Nearside Outer Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut area |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage insecure loose at arb |2.4.G.1| | 1 |
| Nearside Rear Upper Outline marker lamp missing |4.2.1 |a|| | 1 |
| Offside Rear Upper Outline marker lamp missing |4.2.1 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis rail |5.3.6 |a| |i|| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt and slight play |2.1.3 |g| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill and step |5.2.6| | 1 |
| Nearside Rear Brake valve leaking such that brake functionality is affected At brake load sensing valve (1.1.7 (d) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering within 30cm of brake hoses mounting point |6.1.A.1| | 1 |
| Offside Body has a sharp edge caused by corrosion innersill |6.1.C.1| | 1 |
| Offside Rear Position lamp not working tail light (4.2.1 (a) (ii)) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` danglers on mirror |8.3.1e| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Marked in yellow |6.1.1 |c| |ii|| | 1 |
| Nearside Other passenger door cannot be opened from outside the vehicle Sliding door |6.2.3 |a|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced DRIVERS DOORSTEP CORRODED WITHIN 30cms OF SEATBELT MOUNTING |7.1.1 |a| |i|| | 1 |
| Brake pedal has insufficient reserve travel Pedal goes to floor |1.1.2 |a|| | 1 |
| Nearside Brake pipe leaking on a hydraulic braking system Centre near rear of fuel tank |1.1.11 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill within 30cm of leaf spring rear eye mount (5.3.6 (a) (i)) | 1 |
| Statutory seat belt missing Front centre stalk |5.1.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill & floor areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill & floor areas |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis & inner arch areas |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis & inner arch areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis,sill,inner arch areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis, sill & inner arch areas |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting Rear chassis & crossmember areas |6.6.6| | 1 |
| Vehicle structure has a modification which adversely affects braking or steering rear chassis |6.1.A.1| | 1 |
| Nearside Rear Direction indicator incorrect colour LENS HOLED |1.4.A.2f| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement axle x2 Dshaped bushes |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement REARMOST |2.4.G.2| | 1 |
| Offside Rear fog lamp emits a light other than red lens damaged |1.3.2e| | 1 |
| Hazard warning lamps inoperative Only work on nearside of vehicle (4.4.1 (e)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step, within seat/seatbelt mount area (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount, inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount, inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount, inner sill/cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step (7.1.1 (a) (i)) | 1 |
| Front Driving control|s| defective due to rubbish likely to interfere with the proper control of the vehicle. |6.8.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill / footstep |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill / footstep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill / foot step |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch inner arch area |2.4.A.3| | 1 |
| Nearside Outer Rear Brake pipe kinked |3.6.B.2b| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel inner sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (leaf spring) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (leaf spring) (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Brake prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill/door step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie leg outriger x2 |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer seal corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near step (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheels arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near shock |2.4.A.3| | 1 |
| Bonnet primary retaining device ineffective unable to open bonnet for inspection |3.1 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor area |2.4.A.3| | 1 |
| Rear fog lamp tell tale not working starts to flash when hazard light are switched on |1.3.1b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp o.s.r position light and indicator |1.1.A.3f| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear outer sill |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o.s + n.s |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o.s + n.s.r rear wheel arch inner |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step and sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced extension (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced extension (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rigger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rigger (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis at tank |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded ourigger |2.4.A.3| | 1 |
| Offside Front Anti-lock braking system component missing abs ring |3.4.2| | 1 |
| Nearside Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch marked (6.2.2 (d) (i)) | 1 |
| Brake cable guide defective and affecting operation Nearside and Offside rear (1.1.15 (d)) | 1 |
| Nearside Front Front position lamp|s| incorrect colour side marker |1.1.A.3e| | 1 |
| Offside Front Front position lamp|s| incorrect colour side marker |1.1.A.3e| | 1 |
| Offside Rear Front position lamp|s| not working side marker |1.1.A.3b| | 1 |
| engine mounting bracket damaged and likely to fail corroded |6.1.D.1b| | 1 |
| Front Track rod end ball joint has excessive play BOTH SIDES |2.1.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i)) | 1 |
| Towbar excessively corroded within 30cm of towbar mounting cross member |6.1.6 |i| |i|| | 1 |
| Fuel system component leaking Pump (6.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near shock absorber mount. (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Brake hydraulic reservoir fluid level below minimum level No fluid in reservoir |3.6.G.1b| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step |6.2.2 |d| |i|| | 1 |
| Central Front Prop shaft flexible coupling excessively deteriorated |6.1.7 |d| |i|| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour broken |1.1.A.3e| | 1 |
| Offside Rear Brake rod reduced in thickness more than 1/3rd by chaffing |3.5.1a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door/step/and/backing/sill |6.1.B.2| | 1 |
| Offside Rear Shock absorber has an excessively worn bush lower bush |2.7.4| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Wheel arch leading edge. |6.1.C.1| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp MASSIVE EARTH FAULT (4.2.3 (c)) | 1 |
| Nearside Front Brake pipe inadequately supported to flexy |3.6.B.1| | 1 |
| Offside Front Brake pipe inadequately supported to flexy |3.6.B.1| | 1 |
| Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step and inner sill/floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door sill inner/floor |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded behind cab to chassis |5.2.6| | 1 |
| Front Subframe mounting prescribed area is excessively corroded n/s and o/s upper front chassis under bonnet |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s and o/s rear x member |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded n/s and o/s front upper and surrounding spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch front of step (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area / inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near rear spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i)) | 1 |
| Fuel system component leaking Fuel filter housing |7.2.3| | 1 |
| Body mounting fixings insecure (6.2.2 (c) (i)) | 1 |
| Offside Rear Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Offside Inner Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Cill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rust at nsr sill |2.4.A.3| | 1 |
| Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting siil/step |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill (7.1.1 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis both sides |5.3.6 |a| |i|| | 1 |
| Offside Track rod end loose locking nut loose |2.2.B.1d| | 1 |
| Offside Rear Seat belt buckle not functioning as intended clip broken (7.1.2 (d)) | 1 |
| Nearside Rear Seat belt likely to become detached in the event of a collision tied together (7.1.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross rail and step (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail top shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring (5.3.6 (a) (i)) | 1 |
| Rear Brake actuating linkage mounting prescribed area is inadequately repaired load sensing valve mount (1.1.21 (e) (i)) | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength cross member rear of spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shock mount under arch X2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength subframe mount under arch (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount under arch (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring eye mount. spring likely to be come detached (5.3.6 (a) (i)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Steering component mounting prescribed area is fractured |2.2.C.1h| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulkhead to floor (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sills (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sills (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement plastic temporary cap |7.2.4b| | 1 |
| Nearside Rear Lower Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Upper Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Nearside Outline marker lamp not working various (4.2.1 (a) (ii)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn back wishbone bush |5.3.4 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sills
n/s & o/s/r chassis (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected near leaf spring |5.3.6 |a| |ii|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shocker mounting |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded step x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired rear leaf spring mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting point |2.4.A.3| | 1 |
| Bonnet retaining device ineffective bonnet don`t open |8.4.2| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step holed |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step holed |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower b piller corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower c piller corroded |6.2.2 |d| |i|| | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired tipper body floor surport brace corroded/missing |6.2.2 |d| |ii|| | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired tipper body floor surport brace corroded/missing |6.2.2 |d| |ii|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to step |6.1.B.2| | 1 |
| Front Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Rear Seat belt locking mechanism does not secure or release middle |5.2.5a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ns sill & os sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides on chassis (5.3.6 (a) (i)) | 1 |
| Rear Body component insecure tail gate (6.2.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage loose stalk (7.1.1 (b)) | 1 |
| Offside Front Anti-roll bar linkage likely to fail |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Brake cable has restricted free movement |1.1.15 |e|| | 1 |
| Nearside Rear Rear fog lamp not working showing white |4.5.1 |a| |ii|| | 1 |
| Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Nearside Rear Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake lagging in operation little effort also |1.2.1 |d|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at rear of outer sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced At rear of outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Road wheel more than one fixing missing 2x wheel studs snapped (5.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced osf front of step (6.1.1 (c) (i)) | 1 |
| Offside Front Cab steps ring in such a condition that it is likely to cause injury rear of drivers door holed due to corrosion (6.2.8 (b)) | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury inner step holed due to corrosion (6.2.8 (b)) | 1 |
| Nearside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii)) | 1 |
| Emissions not tested vehicle over fuelling on tick over (injector fault) (8.2.2.2 (e)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember |6.1.B.2| | 1 |
| Rear Brake slack adjuster obviously defective |3.5.1m| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor in several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill in several places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by bump stop |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by bump stop |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill in several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill in several places |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Rear Body component damaged and likely to cause injury tail lamp lens |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength panel |2.4.A.3| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn wishbone (5.3.4 (a) (i)) | 1 |
| Front Service brake excessively binding BOTH (1.2.1 (f)) | 1 |
| Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt BOTH (6.1.7 (g) (ii)) | 1 |
| Nearside Leaf spring anchor bracket loose |2.4.B.6a| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspension mount (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area ( seat belt mount ) (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under bonnet (5.3.6 (a) (i)) | 1 |
| Rear Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Cross member |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger spring through floor of van |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper sills |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper sills |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember at parking brake mount |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar insecure Drop link |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar insecure Drop link |2.4.G.1| | 1 |
| Upper Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch top |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch top inside door |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor at arches |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor at arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member at fuel tank |6.1.B.2| | 1 |
| Nearside Front Statutory seat belt missing receiver |5.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill,under sill and out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor joint |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount area |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rear panel and chassis |6.6.6| | 1 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting rear panel and chassis |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor vjoint |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted outer sill,under sill and outrigger |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X MEMBER (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT OF SPRING (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake prescribed area is excessively corroded inner wing (1.1.21 (e) (i)) | 1 |
| Electrical wiring damaged, likely to become detached |1.9.2b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at rear spring hanger |front| |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door sill |6.1.B.2| | 1 |
| Central Exhaust has a major leak of exhaust gases boxes |7.1.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Step |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 1 |
| Brake pipe leaking on an air braking system front to rear (behind fuel filter) (1.1.11 (b) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panell |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side steps |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing of |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking At flex of |3.6.A.1| | 1 |
| Exhaust system not adequately supported Back box of |7.1.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush of |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section & panelling near hanger |2.4.A.3| | 1 |
| Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced INNER VALANCE |6.1.1 |b| |ii|| | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced INNER VALANCE |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER VALANCE/SILL (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER VALANCE (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill [step] |5.2.6| | 1 |
| Brake performance not tested foot |3.7.A.1| | 1 |
| Nearside Rear Axle beam cracked |2.5.A.5a| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Nearside All position lamps not working side markers |1.1.A.3b| | 1 |
| Offside All position lamps not working side markers |1.1.A.3b| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle bump stop |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle bump stop |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member to chassis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2nd from rear cross member to chassis |6.1.B.2| | 1 |
| Offside Front Sub-frame insecure rear securing bolt loose |2.4.G.1| | 1 |
| Leaf spring to axle securing bolt insecure both sides loose |2.4.B.7b| | 1 |
| Offside Inner Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Front Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Front Fluid leak harmful to the environment or a risk to other road users diesel (8.4.1 (a) (i)) | 1 |
| Parking brake lever is not capable of being maintained in operation by direct mechanical action only (1.1.6 (f)) | 1 |
| Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch / floor pan (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing under wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing under wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing engine side |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer underside step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underside step |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis,rear wheel inner arch,step and seat base, front inner wing |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner wing, step and inner sill, rear wheel inner arch and floor, |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis cross member and spare wheel carrier |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis inner panel |6.1.B.2| | 1 |
| Offside Inner Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger at leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger at leaf spring shackle |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis over axle. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis over axle (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear facing |2.4.G.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion WING. |6.1.C.1| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle SIDE LOADING. |6.2.B.1c| | 1 |
| Front Electrical wiring insecure under bonnet |1.9.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring hanger, rear x member and side panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at spring hanger and side panel |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer and inner sill area |2.4.A.3| | 1 |
| Centre Exhaust has a major leak of exhaust gases at centred pipe |7.1.2| | 1 |
| Nearside Front Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X MEMBER (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL / STEP (7.1.1 (a) (i)) | 1 |
| Offside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Side repeater lens defective such that the emitted light is adversely affected Missing (4.4.1 (b) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill and step (6.2.2 (d) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill and step (6.2.2 (d) (ii)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar linkage missing |5.3.3 |a| |ii|| | 1 |
| Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement wish bone |2.4.G.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie marked |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie next to door step marked |6.1.B.2| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is inadequately repaired fibreglass |2.4.A.3| | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded floors / both sides |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill, hole still visible |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill / under driver door |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement wish bone marked |2.4.G.2| | 1 |
| Nearside Body has a projection caused by corrosion center chassie marked |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion chassie marked |6.1.C.1| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside heavily corroded (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear inner wheel arches (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering also inner wing in same area |6.1.A.1| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rearmost |2.4.G.2| | 1 |
| brake caliper securing device loose |3.5.1j| | 1 |
| Nearside Front Ball joint socket spring weak |2.2.B.1e| | 1 |
| Rear Prop shaft bearing excessively worn Furthest Rear (6.1.7 (b) (i)) | 1 |
| Nearside Front Bumper likely to become detached Corroded (6.1.4 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wing/Chassis Leg Top Side And Bottom Under Bonnet And Underside (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wing/Chassis Leg Top Side And Bottom Under Bonnet And Underside (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Spring Anchors Front And Rear Inner Outer Sills Rear Valance Shock Mount And Brake Compensator Holed And Corroded (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Spring Anchors Front And Rear / Chassis Leg At Shock Absorber/ Inner And Outer Sills (5.3.6 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis By Fuel Tank (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis Leg (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar likely to become detached Corroded At Linkage (5.3.3 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill - chalk marked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded `B` Pillar area - chalk marked |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill - chalk marked |2.4.A.3| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion wheel arch area |6.1.C.1| | 1 |
| Offside Front Inner Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at fuel tank |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear spring area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear spring area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step and seat mounts |6.1.B.2| | 1 |
| Nearside Front Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Nearside Rear Rear position lamp|s| not working Has malfuntion |1.1.A.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Sills |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded around seat mounting |5.2.6| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement drop link |2.4.G.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases at off side seam |7.1.2| | 1 |
| Power steering component(s) leaking at pipes on rack (2.3.3b) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cab (5.2.6) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded chassis under cab (5.2.6) | 1 |
| Offside Front Body panel corroded and likely to cause injury wing at top of bumper (6.2.1 (a) (i)) | 1 |
| Nearside Front Road wheel fixing missing wheel nut missing (5.2.1 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn outer ball joint (5.3.4 (a) (i)) | 1 |
| Offside Front Front wheel bearing has excessive play (2.5.A.3c) | 1 |
| Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c) | 1 |
| Nearside Rear position lamp(s) obscured more than 50% (1.1.A.3c) | 1 |
| Offside Front Seat belt retracting mechanism defective (5.2.5b) | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Front Front wheel bearing rough when rotated both (2.5.A.2) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear chassis (3.1.9) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step (5.2.6) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step (5.2.6) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded door step (5.2.6) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded door step (5.2.6) | 1 |
| Nearside Rear Leaf spring fractured (2.4.B.1a) | 1 |
| Nearside Outer Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a) | 1 |
| Rear Statutory seat belt missing (5.1.1) | 1 |
| Brake pedal anti-slip provision incomplete (3.3.A.1b) | 1 |
| Anti-roll bar has excessive play in a pin/bush (2.4.G.2) | 1 |
| Central Rear Prop shaft bearing excessively worn rearmost bearing (6.1.7 (b) (i)) | 1 |
| Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 1 |
| Power steering malfunctioning (2.3.3a) | 1 |
| Power steering pipe(s) or hose(s) leaking (2.3.3b) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Oil leaking excessively from transmission REAR DIFF PAN |8.4.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside inner step |7.1.1 |a| |i|| | 1 |
| Outer Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside Rear Inner brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Rear Inner brake disc contaminated by oil |3.5.1h| | 1 |
| Emissions not tested exhaust back box missing (8.2.2.2 (e)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure link |2.4.G.1| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both D bushes |2.4.G.2| | 1 |
| Electrical wiring insecure for rear lights
|1.9.2a| | 1 |
| Front Bumper insecure both corners (6.1.4 (a) (i)) | 1 |
| Offside Front Upper Position lamp not working roof marker (4.2.1 (a) (ii)) | 1 |
| Rear Prop shaft joint excessively worn rear section, front UJ (6.1.7 (c) (i)) | 1 |
| Oil leaking excessively from engine oil filter housing (8.4.1 (a) (i)) | 1 |
| Rear Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D |5.3.4 |a| |i|| | 1 |
| Nearside Front Body has a sharp edge caused by damage wing,marker light bolts stick out |6.1.C.1| | 1 |
| Front engine mounting deteriorated resulting in excessive movement cross member holed and corroded |6.1.D.1a| | 1 |
| Nearside Upper Front position lamp|s| not working on roof |1.1.A.3b| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Offside Front Obligatory mirror does not provide a view to the rear |3.3 |c|| | 1 |
| Headlamp lens seriously defective both sides |4.1.1 |b| |ii|| | 1 |
| Front Engine mounting bracket fractured cross member |6.1.8 |a| |ii|| | 1 |
| Rear Steering component mounting prescribed area is excessively damaged cross member at fuel tank strap |2.1.2 |e| |i|| | 1 |
| Brake prescribed area is excessively corroded cross member at park brake lever area above fuel tank |1.1.21 |e| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired inner wing |5.3.6 |a| |i|| | 1 |
| Headlamp not working on main beam both sides |1.7.5a| | 1 |
| Stop lamp adversely affected by the operation of another lamp brake lamps are not brighter than position lamps |1.2.1f| | 1 |
| Nearside Rear Lower Anti-roll bar has excessive play in a pin/bush link bush |2.4.G.2| | 1 |
| Centre Vehicle structure has damage which adversely affects braking or steering cross member at h/b pivot |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides rear cross member |6.1.B.2| | 1 |
| Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance dull suspect wrong bulb fitted |1.2.1d| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded cab both sides |5.2.6| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner wings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor under front seat |6.1.B.2| | 1 |
| Front Power steering component|s| leaking rack |2.3.3b| | 1 |
| Nearside Inner Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor, beside fuel tank |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front hanger |2.4.A.3| | 1 |
| Front Brake pipe leaking To rear, centre section |3.6.A.1| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember/floor |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Nearside Front Lower Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Nearside Front position lamp|s| not working SIDE MARKER |1.1.A.3b| | 1 |
| Brake prescribed area is excessively corroded chassie at hand brake cable mounting (1.1.21 (e) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced innerdoor step (7.1.1 (a) (i)) | 1 |
| Nearside Front rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body step |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush insecure |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement bottom arm rear bush |2.4.G.2| | 1 |
| Offside Front All direction indicators not working front wing (4.4.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several places (5.3.6 (a) (i)) | 1 |
| Central Prop shaft bearing housing likely to fail donut on prop (6.1.7 (f) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill several places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill several places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top severral places (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering front cab floors across seating areas and at seat belt and park brake leaver points |6.1.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded near side inner and outer sills |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill under step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear main chassis both sides above axle |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at leaf suspension |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind bumper |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind bumper |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side step |6.1.B.2| | 1 |
| Inner Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Rear coil spring cracked |2.4.C.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER WING HOLED AND CORRODED (7.1.1 (a) (i)) | 1 |
| Fuel tank insecure FRONT TANK STRAP BROKEN (6.1.3 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing repair not fully welded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing holed and corroded also repair in same section not fully welded (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear x member holed and corroded (6.2.2 (d) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated rear coupling (6.1.7 (d) (i)) | 1 |
| Nearside Rear Brake cable damaged hand brake cable fouling wheel (1.1.15 (a)) | 1 |
| Offside Front Brake cable damaged brake cable fouling wheel (1.1.15 (a)) | 1 |
| Brake pipe leaking on a hydraulic braking system FRONT TO REAR (1.1.11 (b) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced DOOR STEP 30CM FROM SEAT MOUNT (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced DOOR STEP 30CM FROM SEAT MOUNT (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER 30CM FROM SEAT MOUNT (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER JACKING POINT (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i)) | 1 |
| Nearside rear brake recording little or no effort and offside |3.7.B.5a| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear wishone bush |2.4.G.2| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a seal at steering rack |2.3.3b| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii|| | 1 |
| Wheel bearing rough when rotated both rear x 2 |5.1.3 |b| |i|| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at jack point |6.1.B.2| | 1 |
| Offside Front Power steering component leaking pipe leaking (2.1.5 (a)) | 1 |
| Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement both rear of |2.4.G.2| | 1 |
| Nearside Front Headlamp not working on main beam |1.2.4a| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush wishbone bush |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush wishbone bush |2.4.G.2| | 1 |
| Braking system leaking front to rear brake pipe burst whilst on brake rollers |3.6.A.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and back crossmember (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and back crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis at rear of rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis at rear of rear spring |2.4.A.3| | 1 |
| Nearside Brake actuating linkage mounting prescribed area is excessively corroded chassi leg load valve mounting |3.3.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear cab floor |5.2.6| | 1 |
| Front engine mounting bracket fractured and likely to fail cross member holed and corroded |6.1.D.1b| | 1 |
| Centre Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Outer Leaf spring anchor bracket corroded and seriously weakened |5.3.1 |b| |i|| | 1 |
| Nearside Front Inner Leaf spring anchor bracket corroded and seriously weakened |5.3.1 |b| |i|| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened chassis |5.3.1 |b| |i|| | 1 |
| Rear Leaf spring anchor bracket corroded and seriously weakened cross member |5.3.1 |b| |i|| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened inner wing |5.3.1 |b| |i|| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened inner sill |5.3.1 |b| |i|| | 1 |
| Offside Rear Outer Leaf spring anchor bracket corroded and seriously weakened sill |5.3.1 |b| |i|| | 1 |
| Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced step holed (6.1.1 (a) (i)) | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced front cross member (6.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i)) | 1 |
| Nearside Front All position lamps not working and o/s/r |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Behind seat |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded behind seat |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner sill, offside inner and outer sill, offside step and offside outrigger |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step |underside| |5.2.6| | 1 |
| Offside Front Brake pipe inadequately clipped brake pipe insecure in engine comp |3.6.B.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o s rear wheel arch corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed and corrodedaove chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering vehicle not struchurally sound for use |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded drivers door sill and door step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door sill and door step |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting tail lift rear panel |6.6.6| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush inscure |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill holed /corroded |5.2.6| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear upper chassie leg at leaf spring x2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg at leaf spring x2 places |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch lower |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg upper |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Crossmember has been removed and replaced with wood!!! |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near strut |6.1.B.2| | 1 |
| Offside Rear reflector excessively deteriorated so that its function is impaired short |1.5.1c| | 1 |
| Offside Rear Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill and wheel arch |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember at spare wheel carrier and spring hanger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill front to rear |2.4.A.3| | 1 |
| Front Bumper insecure both |6.1.4 |a| |i|| | 1 |
| Offside Front Track rod end ball joint dust cover missing |2.1.3 |g| |ii|| | 1 |
| Front Cab steps so insecure it is likely to cause injury heavily corroded both sides |6.2.8 |a| |ii|| | 1 |
| Rear Vehicle structure is deformed and structural rigidity is significantly reduced both sides |6.1.1 |a| |i|| | 1 |
| Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills both sides |6.1.1 |c| |i|| | 1 |
| Central Front Prop shaft joint so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Brake pipe leaking on an air braking system marked in yellow |1.1.11 |b| |i|| | 1 |
| Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt both |2.1.3 |g| |ii|| | 1 |
| Brake disc in such a condition that it is seriously weakened both |1.1.14 |a| |ii|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both arches
marked yellow |6.2.2 |d| |i|| | 1 |
| Nearside Side repeater obscured more than 50% |1.4.A.2d| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at leaf spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at leaf spring shackle |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at leaf spring shackle |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in wheel arch at previous weld |6.1.1 |c| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced seal (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced leg (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced leg (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced crash bar (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Track rod end ball joint has excessive play rack end |2.2.B.1f| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Recent welding repair on off side chassis leg not attached at lower rear corner. |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg behind recent welding repair to chassis leg |6.1.B.2| | 1 |
| Windscreen wiper not operating automatically when switched on Wiper obstruct drivers view as don`t park properly |8.2.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Passengers step corroded and holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Drivers step corroded and holed |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner cill holed as marked |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor holed at mounting for front propshaft bearing |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear leaf spring swinging shackle mounting bracket corroded and holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member corroded and holed |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer cill corroded and holed 2 points along side of vehicle |6.1.B.2| | 1 |
| Nearside Rear Braking system leaking Fluid visable around outside of rear brake drum |3.6.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing below brake servo corroded and holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg corroded and holed below brake servo |6.1.B.2| | 1 |
| Rear Entrance/exit step anti-slip provision damaged to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed/corroded |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed |6.2.2 |d| |i|| | 1 |
| Service brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear Panel |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting Rear panel |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded At spring hanger |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases Silencer split. |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Sill |2.4.A.3| | 1 |
| Power steering component|s| leaking Top pipe at steering rack. |2.3.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering foot step |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis upper and lower |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis three areas |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis two areas |6.1.A.1| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |lsv| |3.3.A.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/ sill |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassie front and rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassie front and rear |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| front brakes release unevenly Offside release slower |3.7.B.4| | 1 |
| All position lamps not working front and rear |4.2.1 |a|| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both rear inner and outter sills
rear chassis rails
rear crossmember
rear out rigger both sides
front inner and outter sills
front out rigger
both front inner arches including by top of struts
inner wings (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner drop sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member to inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded step/floor |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis both ends |2.4.A.3| | 1 |
| Nearside Front Upper coil spring cracked |2.4.C.1a| | 1 |
| Nearside Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Rear Brake hose excessively stretched Insecure. (1.1.12 (b) (ii)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Cross member. (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch within subframe mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering whel arch insecure and likely to fail soon |6.1.1 |a| |ii|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear (5.3.4 (a) (i)) | 1 |
| Fuel tank insecure front strap snapped |6.1.3 |a| |i|| | 1 |
| Offside Rear Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt cover split |2.4.G.2| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt cover split |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step to inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step ( 3 x small patches ) (7.1.1 (a) (i)) | 1 |
| Offside Brake pipe excessively chafed |3.6.B.2c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Inner wing holed. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER AND OUTER CHASSIS AND INNER SILL/STEP |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Suspension component mounting prescribed area is excessively corroded nearside front |INNER AND OUTER CHASSIS AND INNER SILL/STEP| |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill corroded various holes |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill corroded various holes |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill corroded various holes |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill corroded various holes |5.2.6| | 1 |
| Offside Rear Anti-roll bar linkage insecure securing nut loose |2.4.G.1| | 1 |
| Nearside Rear Leaf spring eye defective |shackle| shackle seized |2.4.B.1b| | 1 |
| Offside Rear Leaf spring eye defective |shackle| shackle seized |2.4.B.1b| | 1 |
| Nearside Rear Anti-roll bar locating pin retaining device missing nut missing |2.4.G.3b| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body support as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body support as marked (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body support cross member as marked (6.1.1 (c) (i)) | 1 |
| Inner Rear Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Outer Rear Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Towbar excessively corroded within 30cm of towbar mounting panel |6.1.6 |i| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger 1 of two |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger 2of two |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis 2 places |2.4.A.3| | 1 |
| Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed and rusty near rear spring hanger |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings welded patch not seam welded and has sharp edges |6.1.B.2| | 1 |
| Nearside Rear Integral body structure is deformed and structural rigidity is significantly reduced quarter panel missing |6.1.1 |a| |i|| | 1 |
| Front brake drum excessively pitted |3.5.1h| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded X 2 both front and rear of subframe mounting point |2.4.A.3| | 1 |
| Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/floor (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vehicle baddley corroded every where (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure Rear Strap Corrroded (6.1.3 (a) (i)) | 1 |
| Front Bonnet primary retaining device ineffective Unable To Open/ No Under Bonnet Checks Carried Out (3.1 (c)) | 1 |
| Nearside Rear Leaf spring fractured Front Anchor (5.3.1 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Box Section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Box Section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch/ Inner Wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis Under Seat/Belt (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Section Where Meets Cab Floor (Marked) (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect and low |1.8.A.1b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area at sliding door |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger at rear spring mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis next to fuel tank filler pipe |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings across from fuel tank on chassis |6.1.B.2| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis leg holed (under bonnet) (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer cill holed (6.2.2 (d) (i)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting o/s/r body panel lifting from body (6.2.2 (d) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer cill holed (6.2.2 (d) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer cill holed (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cill holed (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step holed (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting main chassis leg holed (6.2.2 (d) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting main chassis leg holed (6.2.2 (d) (i)) | 1 |
| Offside Rear Body has an unsafe modification wheel arch collapsed (6.2.1 (d) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre section (6.1.2 (a)) | 1 |
| Offside Rear Body insecure wheel arch (6.2.2 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both front steps and both inner sills and both rear inner arches to load area |6.1.A.1| | 1 |
| Nearside Front Upper Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded back chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded back chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER RIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER RIGGER |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded INNER OUTER SILL |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded OUTER INNER SILL |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch to floor (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear chassis, above leaf spring |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear chassis, above leaf spring |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle insecure |2.3.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at bottom of a pillar |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at bottom of a pillar |6.1.B.2| | 1 |
| Offside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides wheel arches (6.1.1 (c) (i)) | 1 |
| Front Inner Vehicle structure is deformed and structural rigidity is significantly reduced sills both sides (6.1.1 (a) (i)) | 1 |
| Front Outer Vehicle structure is deformed and structural rigidity is significantly reduced sills both sides (6.1.1 (a) (i)) | 1 |
| Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` cracked |8.3.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step corroded & loose |6.1.B.2| | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Direction indicator adversely affected by the operation of another lamp Side repeater illuminated when side lamps operated (4.4.3 (b)) | 1 |
| Prop shaft bearing excessively worn First bearing from gearbox (6.1.7 (b) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer wheel arch |6.1.C.1| | 1 |
| Central Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` forward facing camera unit |8.3.1e| | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` sticker |8.3.1e| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step well |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded off rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded off rear spring |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded off rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger forward of rear wheel |2.4.A.3| | 1 |
| Inner rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front Fuel system component leaking under bonnet |7.2.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch flich & chassis |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill areas |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded rear sill areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded enclosed panel |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outter sill front & rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch & chassis |2.4.A.3| | 1 |
| Fuel tank insecure tank straps corroded/broken (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis legs holed near spring/shock absorber mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis legs holed near spring/shock absorber mountings (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear crossmember holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch above leaf spring |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to leaf spring shackle |6.2.2 |d| |i|| | 1 |
| Position lamp adversely affected by the operation of another lamp Rear lights pulsing with indicators switch on |4.2.3 |c|| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel along its length |6.1.B.2| | 1 |
| Nearside Rear Shock absorbers has an excessively worn bush Bush missing. (5.3.2 (c)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing. (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking Injector leaking. (6.1.3 (b) (i)) | 1 |
| Centre Upper Suspension component mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Front Inner Seat belt anchorage prescribed area is excessively corroded steps and sills both sides |5.2.6| | 1 |
| Offside Front Driver`s seat insecure bolt missing |6.2.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis /arch pan |6.1.B.2| | 1 |
| Exhaust emits excessive smoke or vapour of any colour Heavy black |7.4.B.4| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear mount for spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear spring mount area |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill chassis area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill chassis area |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner footwell |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner footwell |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering leg at rear in 2 places |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Rear of cab |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear hanger |2.4.A.3| | 1 |
| Rear Brake pedal spongy |3.3.B.1b| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s & n/s near spring hanger |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Rear Axle has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 1 |
| Centre Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Rear Body component insecure wheel arch cover insecure |6.2.1 |a| |i|| | 1 |
| Horn not working horn in/op |7.7 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount and sill (5.3.6 (a) (i)) | 1 |
| Centre Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Rear Brake pipe inadequately clipped to front |3.6.B.1| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced various parts of chassis marked with chalk |6.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of front spring mounting marked with chalk |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear shackle bracket |2.4.A.3| | 1 |
| Nearside Steering locking device insecure at track rod end |2.2.C.1g| | 1 |
| Offside Steering locking device insecure at track rod end |2.2.C.1g| | 1 |
| Nearside Front Brake hose leaking at caliper |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted Sill |2.4.A.3| | 1 |
| Nearside Brake cable insecure at backplate |3.5.1d| | 1 |
| Offside Brake cable insecure at backplate |3.5.1d| | 1 |
| Seat belt anchorage prescribed area is excessively corroded inner, outer sills and door step holed |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner, outer sills and door step holed |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed and corroded |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear chassis cross member above axle. |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis near spring hanger |6.1.A.1| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill / door step |6.1.A.1| | 1 |
| Front Lower Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer wheel arch |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember x 3 |6.1.B.2| | 1 |
| Offside Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 1 |
| Rear Side repeater has a product on the light source so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Front Additional braking device insecure |3.6.I.1| | 1 |
| Front Brake hydraulic reservoir cap missing |3.6.G.1a| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner arch |6.1.C.1| | 1 |
| Towbar attachment insecure mounting bolts x2 missing from cross member mountings (6.1.6 (c) (i)) | 1 |
| Nearside Front Upper Brake pipe leaking on a hydraulic braking system Bulk head |1.1.11 |b| |ii|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Near side front step area as marked,and near side rear passenger step area as marked |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Near side body to chassis at the rear of cab as marked |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Handbrake mounting on cross member holed an corroded, remaining cross member thin |3.1.9| | 1 |
| Statutory seat belt missing Centre stalk inaccessable |5.1.1| | 1 |
| Headlamp insecure At bottom attachment |1.7.3| | 1 |
| Suspension arm has excessive play in a pin/bearing o/s front bottom ball |2.4.G.2| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch / floor pan (6.2.2 (d) (i)) | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Two places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Three places |2.4.A.3| | 1 |
| Statutory seat belt missing second passenger seat |5.1.1| | 1 |
| Nearside Rear position lamp|s| incorrect colour Incomplete Damaged |1.1.A.3e| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Nearside Rear Lower Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement both side D bushes |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sills in several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sills in several places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded center crossmember |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded center outrigger to crossmember |2.4.A.3| | 1 |
| Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.2.C.1c| | 1 |
| Exhaust has a major leak of exhaust gases broken in half |7.1.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring anchor area , outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle areas ,rear box section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring anchor area , outrigger and inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring shackle area , outrigger , inner sill , box section |2.4.A.3| | 1 |
| Nearside Fuel tank insecure strap broken |7.2.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at anchor area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step / sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step / sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / step (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / step (5.3.6 (a) (i)) | 1 |
| Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Nearside Front Hazard warning lamps operated by more than one switch |1.4.B.1c| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at strut mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Service brake lagging in operation not rising and falling at same rate |1.2.1 |d|| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded both sides step area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at anchor area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle box section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle box section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mounting area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring front mounting area |5.3.6 |a| |i|| | 1 |
| Direction indicators not working All |1.4.A.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear quarter panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor in multiple places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Floor in multiple places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded In rear arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded In rear arch |2.4.A.3| | 1 |
| Power steering component|s| leaking fluid leak from syeering rack |2.3.3b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded cab step |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Sub-frame fractured |2.4.G.1| | 1 |
| Lower Brake pedal pad not secure to the pedal |3.3.A.1c| | 1 |
| Nearside Seat belt webbing significantly weakened cut |7.1.2 |b| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of doorstep |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger front and rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured spring hanger floor to inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt missing seatbelt catch missing |7.1.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep/sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor at |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret support |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret support |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill at |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch at |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel at |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/box |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/box |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under o/s/f seat. |6.1.B.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre |6.2.2 |d| |i|| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Front Sub-frame attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting footwell |6.2.2 |d| |i|| | 1 |
| Nearside Front Brake pipe inadequately clipped up to flexi |3.6.B.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer step area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step area x2 |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step area x2 |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at shocker mount area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |frontmost of spring eye mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |rearmost of spring eye mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor at shocker mount area |6.1.B.2| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion lower panel |full panel |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind leaf spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind leaf spring mount |6.1.B.2| | 1 |
| Hazard warning lamps inoperative all in op |switch| |1.4.B.1b| | 1 |
| Front passenger door pillar insecure arond latch |6.2.B.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill and floor |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outer cill |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion outer cill |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear outrigger |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis/floor |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded arch/chassis |2.4.A.3| | 1 |
| Power steering pipe/hose corroded such that the steering is adversely affected (2.1.5 (g) (ii)) | 1 |
| Brake pipe at imminent risk of failure or fracture front to rear x 4 (1.1.11 (a)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp goes off when fog lamp on (4.2.3 (c)) | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp repeater interaction (4.5.4 (b)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded underside at cable joint mount (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring shackle mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring shackle mount area (5.3.6 (a) (i)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp both |4.2.3 |c|| | 1 |
| Central Front Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mounting area |2.4.A.3| | 1 |
| Offside Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sub frame and gearbox mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis cross member |6.1.B.2| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f/ inner backing sill holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r/ outer sill holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f/ inner step area to backing sill holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f/ inner wheel arch multiple places holed |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/r/ inner sill |6.1.1 |c| |i|| | 1 |
| Service brake excessively binding o/s/r/ |1.2.1 |f|| | 1 |
| Offside Front Brake hydraulic reservoir cap missing |3.6.G.1a| | 1 |
| Nearside brake drum inappropriately repaired |3.5.1n| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing/front suspension mounting |6.1.A.1| | 1 |
| Centre Front Bonnet retaining device excessively deteriorated bonnet wont open /under bonnet checks not done |8.4.2| | 1 |
| Offside Cab steps in such a condition that it is likely to cause injury door step corroded (6.2.8 (b)) | 1 |
| Centre Towbar retaining device missing |6.6.3a| | 1 |
| Fuel tank insecure Front strap broken. (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor. (5.3.6 (a) (i)) | 1 |
| Nearside Leaf spring anchor pin excessively loose in its bracket |2.4.B.3a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step and inner sill section |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step and inner sill section |6.1.B.2| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear bush on lower arm |2.5.A.1c| | 1 |
| Offside brake caliper securing device missing |3.5.1j| | 1 |
| Offside Inner Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under arch in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill under car |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill under car near rear cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill to under arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at rear near cross member |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step to sill under step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step to sill under step |5.2.6| | 1 |
| Offside Rear Leaf spring fractured front spring eye (5.3.1 (b) (i)) | 1 |
| Nearside Rear Halfshaft likely to become detached (6.1.7 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases x2 (6.1.2 (a)) | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength In arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch after wheel, corner panel/chassis/spring mount multiple areas (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In arch after wheel, corner panel/chassis multiple area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/sill end/chassis multiple areas (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill/step area going forward into upper inner arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured front eye broke |2.4.B.1a| | 1 |
| Exhaust has a major leak of exhaust gases back box missing |7.1.2| | 1 |
| Nearside Front position lamp|s| not working Front side light |1.1.A.3b| | 1 |
| Offside rear brake recording little or no effort Rear |3.7.B.5a| | 1 |
| Driver`s seat insecure excessive corrosion. |6.2.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r out rigger has excessive corrosion which is within 30cm of the rear spring hanger |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top area |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded crossmember in several places
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and outrigger forward of wheel
|2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outersill
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outersill
|2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner step |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at leaf shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at leaf shackle |2.4.A.3| | 1 |
| Nearside Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner doorstep |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner doorstep |2.4.A.3| | 1 |
| Offside Outer Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail , inner flitch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail by bump stop |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front / centre chassis rail in several places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front / centre chassis rail |2.4.A.3| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid master cylinder |3.6.A.1| | 1 |
| Offside Front Brake pipe leaking metal |3.6.A.1| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central sill area |6.1.B.2| | 1 |
| Nearside Rear Leaf spring shackle pin excessively loose in its bracket |2.4.B.3a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring front shackle mount |2.4.A.3| | 1 |
| Nearside Front Brake pipe inadequately clipped to rear |3.6.B.1| | 1 |
| Offside Front Brake pipe inadequately clipped to rear |3.6.B.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal at rack |2.3.3b| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake lining(s) contaminated shaft seal leaking (1.1.13 (b)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill jacking point |2.4.A.3| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |4.1.3 |b|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill at rear |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill in several places |6.1.1 |c| |i|| | 1 |
| Nearside Front Floor excessively deteriorated footwell |6.2.4 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated footwell |6.2.4 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch behind front wing |6.1.1 |c| |i|| | 1 |
| Nearside Body component corroded and likely to cause injury tipper side sharp edges |6.2.1 |a| |i|| | 1 |
| Offside Body component corroded and likely to cause injury tipper side sharp edges |6.2.1 |a| |i|| | 1 |
| Front Outline marker lamp not working top |4.2.1 |a|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o.s x member (5.3.6 (a) (i)) | 1 |
| Offside Rear Position lamp not working tail (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension rod insecurely attached loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and step (5.3.6 (a) (i)) | 1 |
| Offside Rear Braking system leaking fluid dripping from back plate |3.6.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired inner and outer sill both in front and to rear of rear wheel |2.4.A.3| | 1 |
| Centre Front Lower Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| All outline marker lamps not working O/s and n/s (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sil (6.2.2 (d) (i)) | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded O/S,N/S INNER SILLS/STEP HOLED & CORRODED |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded INNER SILL CENTRE HOLED & CORRODED |2.4.A.3| | 1 |
| Trailer electrical socket (13 pin) not functioning at all Seized (4.10 (c) (ii)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Body mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Body mount (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel well (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel well (6.1.1 (c) (i)) | 1 |
| Offside brake caliper leaking |3.6.A.1| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure U bolt sheared |2.4.B.7b| | 1 |
| Offside Front Brake pipe inadequately clipped to flex hose at chassis |3.6.B.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength paneling/box sections near spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength paneling/box section near spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near strut turret (5.3.6 (a) (i)) | 1 |
| Offside Upper Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear Leaf spring deteriorated and seriously weakened hoop around swing shackle
|2.4.B.1a| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front inner arch - subframe |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp stop lamp |1.1.A.3f| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner and outer sills |6.1.B.2| | 1 |
| Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassie |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Step |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis beside fuel tank |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch holed |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner and outer sills, all inner wheel arches and rear crossmember |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At inner sill area|chalk marked|. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember at spring hanger.|chalk marked|. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At crossmember at spring hanger.|chalk marked|. |5.3.6 |a| |i|| | 1 |
| Brake pipe leaking 1 of 2 front to rear. |3.6.A.1| | 1 |
| Offside Rear Brake pipe leaking Pipe to rear wheel cylinder. |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded At inner sill area. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded At inner sill area. |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6| | 1 |
| Central Front Seat belt locking mechanism does not secure or release stalk missing |5.2.5a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded pannel |2.4.A.3| | 1 |
| Nearside Front Body has a projection caused by corrosion bumper insecure |6.1.C.1| | 1 |
| Centre Brake linkage excessively corroded and seriously weakened crossmember |3.5.1e| | 1 |
| Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded outer and inner sill and step |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis cross over above axle |marked with chalk| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch, marked yellow |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember marked yellow |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember marked yellow |6.6.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch marked yellow |2.4.A.3| | 1 |
| Front Seat belt retracting mechanism defective (5.2.5b) | 1 |
| Offside Front Brake pipe inadequately supported (3.6.B.1) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill where marked (6.1.B.2) | 1 |
| Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp Front and rear, due to indicator (4.4.3 (b)) | 1 |
| Nearside Front coil spring broken (2.4.C.1a) | 1 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush (2.4.B.2) | 1 |
| Nearside Front Direction indicator not working (1.4.A.2c) | 1 |
| Offside Front Direction indicator not working (1.4.A.2c) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Under bonnet/chassis leg (5.3.6 (a) (i)) | 1 |
| Speedometer clearly inoperative speedo sat at 15mph on tick over and goes up and down when rev vehicle (7.8 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced behind/under drivers seat along back of bulkhead (7.1.1 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate limit 0.68 (8.2.2.2 (a)) | 1 |
| Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| Statutory seat belt missing (5.1.1) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2) | 1 |
| Nearside Rear position lamp(s) incorrect colour (1.1.A.3e) | 1 |
| Nearside passenger door cannot be opened from outside the vehicle sliding door (6.2.B.1c) | 1 |
| Brake actuating linkage mounting prescribed area is deliberately modified which significantly reduces the original strength |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill back |5.3.6 |a| |i|| | 1 |
| Power steering pipe/hose excessively corroded pipe to steering rack corroded (2.1.5 (g) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury leading edge of sliding door (6.2.1 (a) (i)) | 1 |
| Centre Rear Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush REAR |2.5.A.1c| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn arm rear bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Upper passenger door hinge insecure |6.2.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired stiched |5.2.6| | 1 |
| Offside Front Brake pipe inadequately supported below servo in engine compartment |3.6.B.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired inner sill area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill at drivers step |5.2.6| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is fractured crossmember above fuel tank |3.1.9| | 1 |
| Offside Seat belt anchorage prescribed area is fractured outrigger to inner sill |5.2.6| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is inadequately repaired crossmember at handbrake cable mount insufficeint welding |3.1.9| | 1 |
| Offside Front Upper Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Lower Body has a sharp edge caused by corrosion cill |6.1.C.1| | 1 |
| Offside Lower Body has a sharp edge caused by corrosion cill |6.1.C.1| | 1 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc inner boot |2.5.C.1a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering 2 places on top and on side |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering on top, side and underneath |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering central |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch at the top |2.4.A.3| | 1 |
| Brake cable has wires broken and is significantly weakened broken |3.5.1b| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp pulsing with indicator |1.1.A.3f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring shackle |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing support panel |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing support panel |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded main chassis leg |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis leg |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner cab step/ inner sill |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal rack shaft |2.3.3b| | 1 |
| Fuel pipe leaking at diesel pump |7.2.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan by inner door step |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outrigger at rear of cab |5.2.6| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid load sensing valve (1.1.16 (b) (i)) | 1 |
| Nearside Rear Leaf spring to axle fixing bolt insecure front spring eye bolt (5.3.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Rear Exhaust tailpipe positioned so that fumes are likely to enter driver`s cab |7.1.5| | 1 |
| Front Exhaust has a major leak of exhaust gases down pipe flexi damaged |6.1.2 |a|| | 1 |
| Central Prop shaft securing bolt loose center mount yolk loose |6.1.7 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in several places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in several places (5.3.6 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at suspension arm fixture point |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at suspension arm fixture point |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step well area seat belt anchorage point |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step well area at seat belt anchorage point |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at engine mount under bonnet |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill at jacking point |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to step |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to step |6.1.1 |c| |i|| | 1 |
| Offside Body panel corroded and likely to cause injury sill sharp edge |6.2.1 |a| |i|| | 1 |
| Nearside Front Power steering pipe/hose modification unsafe insecure |2.1.5 |f| |i|| | 1 |
| Offside Dropside corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Body panel corroded and likely to cause injury tipper buck both sides |6.2.1 |a| |i|| | 1 |
| Nearside Fuel cap/sealing device does not fasten securely by a positive means |6.7.2a| | 1 |
| Brake pipe inadequately supported engine compartment |3.6.B.1| | 1 |
| Nearside Body has a projection caused by corrosion sill at centre and rear |6.1.C.1| | 1 |
| Nearside Inner Body has a projection caused by corrosion sill at centre and rear |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion sill on inside and outside |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut mount |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion OUTER SILL |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BACK CORNER STRUCTURE |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BACK CORNER STRUCTURE |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill near spring hangers |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch under wheel arch |6.1.B.2| | 1 |
| Front Power steering pipe|s| or hose|s| leaking main |2.3.3b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leaf spring |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of arch - marked yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to body mount - in front of rear wheel - marked yellow |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step - marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outriggar at spring hanger |6.1.B.2| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member at flexi hoses |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at spring hanger |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both inner and outer sills holed at |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step at |5.2.6| | 1 |
| Offside Bonded suspension unit deteriorated and cannot function as intended wishbone bush |2.4.F.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at |2.4.A.3| | 1 |
| Offside Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Anti-roll bar missing |2.4.G.1| | 1 |
| Offside Front Front position lamp|s| not working head light bulb |1.1.A.3b| | 1 |
| Nearside Track rod end ball pin shank loose track rod end |2.2.B.1c| | 1 |
| passenger door cannot be opened from outside the vehicle side |6.2.B.1c| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and step (5.3.6 (a) (i)) | 1 |
| Suspension arm ball joint excessively worn both front (5.3.4 (a) (i)) | 1 |
| Additional braking device inoperative compensator |1.5 |b|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie |6.1.1 |c| |ii|| | 1 |
| Offside Rear Leaf spring cracked front eye bush |2.4.B.1a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to underside |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering white marks showing places |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering white marks |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering white marks |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Headlamp cleaning device for LED or HID headlamp inoperative |4.1.6 |a| |ii|| | 1 |
| Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch and inner chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced front inner step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component corroded and seriously weakened front and rear of inner arch (5.3.3 (b) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet at engine mount |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at drivers door and at the rear of the sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Upper and lower |6.1.B.2| | 1 |
| Offside Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Nearside Rear Suspension arm cracked |2.4.G.1| | 1 |
| Offside Rear Suspension arm cracked |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/floor to wheel arch joint |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Near and Offside shackle mount points Near and Offside (5.3.6 (a) (ii)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced Near and Offside sill (7.1.1 (a) (i)) | 1 |
| Floor excessively deteriorated Near and Offside door step heavily corroded (6.2.4 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near and Offside sill ALL (6.2.2 (d) (i)) | 1 |
| Brake performance not tested heavy suspension corrosion (1.2.1 (g)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of front wheel arch...chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch....chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Body has a sharp edge caused by damage light lens broken |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by damage light lens broken |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut top | inner wheel arch | |2.4.A.3| | 1 |
| Emissions not tested smokey (8.2.2.2 (e)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength wing holed |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting excessively corroded within 30cm of engine mount (in engine bay) (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced excessive corrosion under wheel arch in 3 or more places (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn bottom arm rear bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt cv boot insecure (6.1.7 (g) (ii)) | 1 |
| Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen all 4 washer jets not catching screen tidy (3.5 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis excessively corroded (front leaf spring mount area and couple of more p[laces towards back of chassis) (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced excessively corroded on underside of step chassis and top of wheel arch including top strut mount area (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis has a lot of corrosion (marked in yellow crayon) (6.1.1 (c) (i)) | 1 |
| Offside Front Brake fluid significantly below minimum mark also brake fluid cap is missing (1.1.10 (d) (ii)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn bottom arm rear bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced underside of step has excess corrosion (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis excessively corroded in a few places (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure strap corroded/broke |7.2.1| | 1 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement `d` bush |2.4.G.2| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front area / sill |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded top of step area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill at anchor area |2.4.A.3| | 1 |
| Front Driver`s view to front impaired by crack Windscreen cracking in zone A |6.9.1b| | 1 |
| Nearside Entrance/exit step insecure Entrance step excessively corroded underneath plastic step cover. |6.1.E.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring hanger bracket mounting point corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounting points at chassis and inner and outer sills. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at front and rear mounting points at chassis and outer sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded at front inner wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut top mounting area at inner wing |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking compensator |3.6.A.1| | 1 |
| Fuel tank insecure rear tank strap corroided |7.2.1| | 1 |
| Nearside Rear Axle king pin is loose in the axle beam |2.5.A.3a| | 1 |
| Offside Rear Axle king pin is loose in the axle beam |2.5.A.3a| | 1 |
| Headlamp not working on dipped beam both headlights |1.7.5a| | 1 |
| Headlamp not working on main beam both headlights |1.7.5a| | 1 |
| Nearside Inner Steering system has excessive free play detected at the steering wheel |steering rack fitted| excessive play in n/s inner steering rack end |2.2.A.1b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner rear wheel arch to floor corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s & o/s inner sills corroded |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering OUTTER AND INNER SILL |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering FRONT DOOR STEP |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front of spring |2.4.A.3| | 1 |
| Centre Rear Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Spring mount area holed in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded mount holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mount holed
|2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember holed |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sections of chassis leg holed |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mount area holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount area holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount area holed |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed at spare wheel mount |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded At offside front chassis leg. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded At outer sill area. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded As seen from inner wheelarch corrosion at inner valance. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Detail as above |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at crossmember |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing next to engine crossmember |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill below side loading door-close to seatbelt anchorage |6.1.B.2| | 1 |
| Power steering pipe/hose leaking pipe into rack |2.1.5 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chasiss leg |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chasiss leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch near spring
mounting within 30 cm |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner step and sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner step and sill |5.2.6| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner and outer chassis leg and inner wing |2.4.A.3| | 1 |
| Emissions not tested no gas at rear |7.3.A.1| | 1 |
| Nearside Rear Brake pipe excessively damaged |1.1.11 |c|| | 1 |
| Front Anti-roll bar damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Front Ball joint damaged and unserviceable |2.2.C.1d| | 1 |
| Offside Body has a projection caused by corrosion inner sill and at inside of step |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion rear sill |6.1.C.1| | 1 |
| Offside Rear Brake valve leaking WHEEL CYLINDER |1.1.7 |d| |i|| | 1 |
| Exhaust has a major leak of exhaust gases at centre box |7.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both outriggers |2.4.A.3| | 1 |
| Exhaust system not adequately supported all |7.1.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |centre| |6.1.B.2| | 1 |
| Offside Front Brake pipe inappropriately repaired pipe to long and insecure |3.6.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outriggers |2.4.A.3| | 1 |
| Nearside Rear Body has a projection caused by corrosion chassis |hole| |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion at leaf spring holder |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |under side| |2.4.A.3| | 1 |
| Nearside Front Body insecure and dangerous to other road users of bumper |6.1.B.1b| | 1 |
| Rear Brake pipe inadequately supported pipe to flexis |3.6.B.1| | 1 |
| Front Subframe mounting prescribed area is excessively corroded both front chassis tops in engine compartment above subframe |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded chassis at subframe mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis and crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and crossmember |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded at load sensing valve |3.3.A.2| | 1 |
| Centre Front Drive shaft uj which forms part of the suspension has a loose flange bolt prop shaft |2.4.G.4c| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis leg |5.2.6| | 1 |
| Brake pipe inadequately supported main front to rear brake pipe |3.6.B.1| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Front bush |2.4.G.2| | 1 |
| Centre Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded rear bulk head |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded rear bulk head |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step as marked |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength bulkhead |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis at inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp all lamps at this location are interacting |1.4.A.2h| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount area holed weak |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount area holed weak |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above leaf spring |floor holed weak| |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step weak |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step weak |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill body spilt from outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all over van |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner SILL |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside inner sills at steps |6.1.B.2| | 1 |
| Offside Driver`s seat insecure excessive corrosion at floor panel |6.2.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded REAR LEAF SPRING MOUNTING TO REAR CROSSMEMBER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded SILLS |5.2.6| | 1 |
| Centre Brake cable has wires broken and is significantly weakened broken |3.5.1b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd to rear crossmember, O/S chassis leg at rear of cab , (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced At rear of cab (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced At rear of cab (6.1.1 (c) (i)) | 1 |
| Exhaust system insecure Rear rubber mounts broken - Front mounts very cracked/perished (6.1.2 (a)) | 1 |
| Nearside Front Suspension arm corroded and seriously weakened At rear bush (5.3.3 (b) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At front handbrake cable mounting |6.1.1 |c| |i|| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At rear handbrake cable mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced At fuel tank mount |6.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At fuel tank mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Brake pipe inadequately clipped on axel |3.6.B.1| | 1 |
| Brake pipe leaking front to rear |above fuel tank| |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |at leaf spring shackle| |2.4.A.3| | 1 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |inner rack joint excessively worn | |2.2.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at leaf spring shackle |2.4.A.3| | 1 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| inner rack joint excessively worn |2.2.A.1b| | 1 |
| front brake recording little or no effort nearside slow coming on |3.7.B.5a| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint top of steering rack where pipes fix to |2.3.3b| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake cable mounting |3.1.9| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded near foot step |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings valence to chassis |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis and inner wing holed and corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed and corroded at door step (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis holed and corroded (6.2.2 (d) (i)) | 1 |
| Brake pipe inadequately supported both rear |3.6.B.1| | 1 |
| Nearside Front Outer Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Body has a sharp edge caused by damage floor on rear plat form damaged |6.1.C.1| | 1 |
| Spare wheel carrier insecure and wheel missing |6.4.2| | 1 |
| Front engine mounting bracket insecure and likely to fail x member corroded |6.1.D.1b| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering various x members |6.1.A.1| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded marked |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured marked |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded marked |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step (6.2.2 (d) (i)) | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering engine crossmember (6.1.1 (c) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis top rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced dehind cab (6.1.1 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush nut loose |2.4.G.2| | 1 |
| Front Suspension arm pin or bush excessively worn n/s and o/s rear bush |5.3.4 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member above rear axle |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member above center bearing |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake hose stretched |found during steering lock to lock check| middle mounting bracket bent |2.2.D.2b| | 1 |
| Exhaust has a major leak of exhaust gases at hole in rear silencer |7.1.2| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at cable split point |3.1.9| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded main chassis at top side at both sides of vehicle close to leaf spring front mounting points |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring front mount
|2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring front mount |2.4.A.3| | 1 |
| Braking system leaking From os front to rear brake pipe |3.6.A.1| | 1 |
| Nearside Front front parking |secondary| brakes imbalanced 63% imbalance |3.7.B.6b| | 1 |
| Rear Swivelling towbar swivel pin excessively worn |6.6.5b| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings midle chassis |6.1.B.2| | 1 |
| Fuel tank insecure strap insecure |7.2.1| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings midle beside leaf spring anchor |6.1.B.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step corroded to excess seat anchorage (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis section at spring mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember above wheel carrier |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember above wheel carrier |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded and offside rear 2nd crossmember |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded and offside 3rd crossmember corroded |2.4.A.3| | 1 |
| Nearside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis top hat section rearward from forward spring mounting to rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis top hat section rearwards from forward spring mounting to rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger mounting inboard of chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to back, whole chassis |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear, whole chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced rear subframe mounting |6.1.1 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecure nut |2.4.G.1| | 1 |
| Rear Lower Anti-roll bar linkage insecure nut |2.4.G.1| | 1 |
| Front Exhaust has a major leak of exhaust gases blowing on front of cat wear is welded (6.1.2 (a)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both parts of chassis above sub frame marked with chalk (6.2.2 (d) (i)) | 1 |
| Front Prop shaft bearing excessively worn marked with chalk (6.1.7 (b) (i)) | 1 |
| Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Front Exhaust system not adequately supported as marked |7.1.1| | 1 |
| Glazing/screen/partition missing |6.9.2| | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced side door step area/sill holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd last crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd last and rear crossmember (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Out rigger in front of rear wheel (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis member behind fuel tank (6.1.1 (c) (i)) | 1 |
| Prop shaft flexible coupling so deteriorated it is likely to fail both prop mounting (6.1.7 (d) (ii)) | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 1/4 panel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 1/4 panel |6.1.B.2| | 1 |
| Nearside Headlamp not working on dipped beam staying on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on dipped beam staying on main beam |1.7.5a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nsr osr at front and rear of leaf springs |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nsr osr chassis at rear of leaf spring |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nsr osr inner wing at shocker top mtg |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded ns/os inner and outer sills |5.2.6| | 1 |
| engine mounting bracket damaged and likely to fail excessively corroded and holed |6.1.D.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is fractured SEAT MOUNTING |5.2.6| | 1 |
| Nearside Rear Leaf spring fractured FRONT |2.4.B.1a| | 1 |
| Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting TOWING EYE |6.6.6| | 1 |
| Brake valve locking device insecure |3.6.A.2d| | 1 |
| Nearside Inner Front Passenger door cannot be opened from outside the vehicle |6.5.11a| | 1 |
| Nearside Inner Front Passenger door cannot be opened from inside the vehicle |6.5.11a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner / outer |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner / outer |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is severely distorted cross member |2.4.A.3| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded mid cross member |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner upper wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/chassis |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases flexi pipe |7.1.2| | 1 |
| Fuel tank insecure Rear tank strap corroded and broke (6.1.3 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, up by shocker (5.3.6 (a) (i)) | 1 |
| Inner Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded holed and corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance / outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Brake prescribed area is excessively corroded chassis leg, compensator mounting |1.1.21 |e| |i|| | 1 |
| Offside Lower Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle out rigger off side |6.1.B.2| | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering close to subframe |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner corner |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner corner |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch / floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch / floor |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion bumper |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis within load sensing valve mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel box to load floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheelbox /floor |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill within seatbelt |2.4.A.3| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bumper bracket |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch to body |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings main beam above axal |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by drivers step |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides under wheel arch |6.1.B.2| | 1 |
| Nearside Front Radius arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring box section |6.1.B.2| | 1 |
| Nearside Drag link end ball joint has excessive play rack arm |2.2.B.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger above spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger above spring |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis leg at hanger |2.4.A.3| | 1 |
| Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Offside Front Lower Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear All position lamps not working side marke |1.1.A.3b| | 1 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired showing white light |1.5.1c| | 1 |
| Nearside All position lamps not working fron and rear marker |1.1.A.3b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearsid and offside rear at fron and rear off leaf spring mounts |6.1.B.2| | 1 |
| Anti-roll bar linkage worn and seriously weakened n/s &o/s rear d links and dbar bushes |2.4.G.1| | 1 |
| Central Exhaust system insecure CENTRE SNAPPED (6.1.2 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FULL SILL /DROP SILL /STEP (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt BOTTOM BALL JOINT (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt BOTTOM BALL JOINT (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension rod pin or bush excessively worn DROP LINK (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension rod pin or bush excessively worn DROP LINK (5.3.4 (a) (i)) | 1 |
| Offside Drivers view of an obligatory external mirror materially affected by an obstruction (3.1 (a) (ii)) | 1 |
| Front position lamp|s| not working o/s + n/s |1.1.A.3b| | 1 |
| Fuel system component leaking at front of engine |7.2.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded at outer sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded at outer sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded at sill back and box section |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area below sliding door |6.2.2 |d| |i|| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing holed & corroded |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill & door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill & door step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mounts |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorbers mounts |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NS STEP EXCESSIVE CORROSSION |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OS STEP EXCESSIVE CORROSION |6.1.B.2| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle NS PASSENGER DOOR |6.2.B.1c| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Back of leaf spring and spare wheel well |2.4.A.3| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is excessively corroded Near leaf Spring |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Rear inner acrh |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Rear outer sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember at spring |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings At spring |6.1.B.2| | 1 |
| Nearside Rear rear brake recording little or no effort park |3.7.B.5a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and back panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering three places |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering three places |6.1.A.1| | 1 |
| Centre Brake actuating linkage mounting prescribed area is inadequately repaired |3.3.A.2| | 1 |
| Rear Fluid suspension unit leaking |2.4.D.2| | 1 |
| Front Brake cable insecure |3.5.1d| | 1 |
| Upper Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg above subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer step (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced back of cab (7.1.1 (a) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror cover (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Road wheel fractured (5.2.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer and inner wheel arch area near shock absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer and inner wheel arch area near shock absorber |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting cross member |6.6.6| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings over axle |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre carrier bearing cross member |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mounting |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Prop shaft bearing housing bracket |5.3.6 |a| |i|| | 1 |
| Offside Front front brakes release unevenly binding slow on and off |3.7.B.4| | 1 |
| Prop shaft bent (6.1.7 (e)) | 1 |
| Service brake effort inadequate at a wheel both rear brakes (1.2.1 (a) (i)) | 1 |
| Offside Upper Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Upper Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Front Front position lamp|s| not working Both Front Lamps, N/S & O/S |1.1.A.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Next to spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Nearside Rear Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Offside Front Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting drivers side door step corroded through (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sil (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside centre and rear chassis sections |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside centre and rear chassis sections |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring shackle mount (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring shackle mount (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed just behind rear spring mounting. marked yellow (2.4.A.3) | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill holed marked yellow (2.4.A.3) | 1 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed marked yellow (2.4.A.3) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Multiple places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Multiple places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Multiple places (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure Mount corroded (6.1.3 (a) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion (6.1.C.1) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Offside Rear wheel bearing rough when rotated (2.6.1) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg by floor (2.4.A.3) | 1 |
| Offside Rear wheel cylinder leaking (3.6.A.1) | 1 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened (2.4.B.6d) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1) | 1 |
| Stop lamp not working both sides ,bulb holders and wiring corroded |1.2.1b| | 1 |
| Fluid leak harmful to the environment or a risk to other road users oil filter (8.4.1 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement D |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar rubber bush deteriorated resulting in excessive movement D |2.4.G.2| | 1 |
| Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement Both |2.4.G.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and step |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill and step |6.2.2 |d| |i|| | 1 |
| Offside Rear Leaf spring eye defective |anchor| rear eye brokern |2.4.B.1b| | 1 |
| Nearside Upper Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Service brake lagging in operation COMING ON AND GOING OFF (1.2.1 (d)) | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp possible bad earth |1.1.A.3f| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step and inner sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step and inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis view from wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near spring monting |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg view from wheel arch / near strut |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded panel adjoining chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger by front spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded skirt underneath |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch front and rear |2.4.A.3| | 1 |
| Offside Exhaust system not adequately supported rear box mounting perished |7.1.1| | 1 |
| Towbar component excessively damaged socket |6.6.1| | 1 |
| Headlamp cleaning device obviously defective both as HID`s fitted with no cleaning device |1.7.2| | 1 |
| Headlamp levelling device obviously defective Both as HID headlamps fitted without self levelling system |1.7.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded close to out rigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body mounting |6.1.B.2| | 1 |
| Nearside Rear Leaf spring shackle bracket corroded and seriously weakened rear one |2.4.B.6d| | 1 |
| Nearside Rear Leaf spring eye defective |shackle| rear one |2.4.B.1b| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is inadequately repaired and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength LEAF SPRING MOUNTING FRONT AND REAR AS MARKED (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength REAR LEAF SPRING MOUNTING (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting point |2.4.A.3| | 1 |
| Central Seat belt damaged |7.1.2 |b| |i|| | 1 |
| Power steering component leaking Steering rack leaking |2.1.5 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded with in 30 cm of front shock strut mounting |2.4.A.3| | 1 |
| Brake load sensing valve inoperative not conected but fitted |3.6.E.3| | 1 |
| Service brake is causing the vehicle to swerve to the offside service brake |3.7.C.2| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded Under bonnet |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded Under bonnet |2.4.A.3| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated Rear |2.6.1| | 1 |
| Offside Rear Rear wheel bearing rough when rotated Rear |2.6.1| | 1 |
| Nearside Rear Wheel bearing rough when rotated Rear most axel |5.1.3 |b| |i|| | 1 |
| Offside Rear Wheel bearing rough when rotated Rear most axle |5.1.3 |b| |i|| | 1 |
| Nearside Rear Brake lining|s| contaminated Foremost axel |1.1.13 |b|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Shock absorbers insecurely attached loose |5.3.2 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner+outer sills |6.1.B.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear crossmember (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 2 x inner sills + o/s step (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s wheel arch + inner wing (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s inner wing (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis rail (6.1.1 (a) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing |6.2.2 |d| |i|| | 1 |
| Suspension arm pin or bush excessively worn both front |5.3.4 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/o sill + x2 step + o/s/i sill + n/s/r floor |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r sill |outer + inner| + n/s step |underneath|+ o/s/r inner sill + n/s/r inner arch |6.1.B.2| | 1 |
| Outline marker lamp not working both front upper and nearside rear upper (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front outer sill |5.2.6| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
| Front Direction indicator incorrect colour both |1.4.A.2f| | 1 |
| Rear Position lamp not working bothsides (4.2.1 (a) (ii)) | 1 |
| Brake pipe leaking on an air braking system FRONT TO REAR (1.1.11 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS TO REAR CROSSMEMBER (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLITCH UNDER WING (5.3.6 (a) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced inner sill holed (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner sill (6.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch. (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch. (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch. (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sil. (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sil. (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sil. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sil. (6.2.2 (d) (i)) | 1 |
| Fuel pipe leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Offside Rear Lower Suspension component pin or bush likely to become detached Bump stop |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Lower Suspension component pin or bush likely to become detached Bump stop missing |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step and Sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Rear Lower Dropside cannot be secured in the closed position |6.4.1| | 1 |
| Offside Front Lower Boot lid corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of sill/ step area |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near front leaf spring mount. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near rear shock. |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WING |6.1.B.2| | 1 |
| Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mounting for handbrake cable cross member |6.1.B.2| | 1 |
| Centre Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings handbrakecable mounting |6.1.B.2| | 1 |
| Offside Front Outline marker lamp not working and insecure (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near bump stop |6.1.A.1| | 1 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative SEIZED (1.1.17 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arm (5.3.6 (a) (i)) | 1 |
| Hydraulic fluid leaking excessively Power steering pipe (8.4.1 (a) (i)) | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt ball joint dust cover |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear spring hanger |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced all (6.1.1 (c) (i)) | 1 |
| Central Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced all (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step/inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel housing to floor |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases x2 silencers |7.1.2| | 1 |
| Emissions not tested exhaust |7.4.B.1| | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn Link bolt loose (5.3.4 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides front inner and outer sills |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chalked |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner arch chalked |2.4.A.3| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded Inner chassis by brake pipes underneath |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear of Spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear of Spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front of Spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front of Spring |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis...front mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis...front mounting |5.3.6 |a| |i|| | 1 |
| Offside Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/wing pannel |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded vallance |multiple places| |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting vallance |6.6.6| | 1 |
| Fuel tank insecure front strap defective |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded vallance |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch as chalked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor to inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear All position lamps not working and centre |1.1.A.3b| | 1 |
| Nearside All position lamps not working all side position lights along bed of van |1.1.A.3b| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush D bush |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded and holed at spring mount. (6.1.1 (c) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded door step / sill & inner sill |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded Chassis by shock absorber mount |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded seat base mount has belt bolted to it |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded stut top |2.4.A.3| | 1 |
| Offside Rear Leaf spring cracked spring eye front |2.4.B.1a| | 1 |
| Brake load sensing valve defective and function impaired spring hanging off |3.6.E.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind brake compensator
|6.1.B.2| | 1 |
| Nearside Rear Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Nearside Front Body has a sharp edge caused by damage wing mirror casing |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded foot well |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chassis various sections (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chassis various sections (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded holed, rear sping area (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rails inner sill area , inner arch ares |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rails inner sill areas |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner sill area / floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail [engine mount] |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and nearside inner sill next to leaf spring mounting |2.4.A.3| | 1 |
| Driver`s door cannot be opened from outside the vehicle drivers door handle missing |6.2.B.1b| | 1 |
| Side repeater missing o/s |1.4.A.2b| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f outter sill to outter wheel arch holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r outter to inner sill corroded and distorted |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s outter sill holed and distorted complete |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r outter wheel arch holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s inner sill holed multiple places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r chasis leg holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s inner sill corroded,distorted and weak multiple places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f rear lower inner arch holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner arch holed visible from under bonnet area |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp side light flashes when indicator is on |4.4.3 |b|| | 1 |
| Offside Rear Direction indicator not working when brake pedal pressed indicator stops working |4.4.1 |a| |ii|| | 1 |
| Offside Front Steering linkage ball joint has excessive play inner steering arm |2.1.3 |b| |i|| | 1 |
| Nearside Front Brake disc insecure bolts holding disc loose (1.1.14 (a) (ii)) | 1 |
| Emissions not tested engine producing blue smoke and missing under load |7.4.B.1| | 1 |
| Stop lamp(s) all not working both (4.3.1 (a) (iii)) | 1 |
| Horn not working relay and horn defective |1.6.2a| | 1 |
| Nearside Rear All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Offside Direction indicator not working side repeater (4.4.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working Centre (4.2.1 (a) (ii)) | 1 |
| Central Fuel pipe insecure x2 hanging loose (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member by anti roll bar mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member by anti roll bar mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis above subframe |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis/inner arch - sub frame (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner arch - top mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Body panel corroded and likely to cause injury arch |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (viewed from under bonnet - below servo area) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - sub (under vehicle) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch - top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - sub frame (5.3.6 (a) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back panel - several body mount areas (6.2.2 (d) (i)) | 1 |
| Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Suspension spring mounting prescribed area is excessively corroded near side rear spring rear hanger bracket area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded outside of near side rear chassis next to shock top mount |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is fractured outside of off side rear chassis next to shock top mount |2.4.A.3| | 1 |
| Prop shaft flexible coupling excessively deteriorated CENTRE (6.1.7 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Fwd Spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Fwd Spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear Spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear Spring mounting |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Compensator mount |3.3.A.2| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting Crossmember |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount area holed 2 places (5.3.6 (a) (i)) | 1 |
| Centre Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings center |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings abvove drivers front wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis |6.1.B.2| | 1 |
| Nearside Front Inner Track rod end ball joint has excessive play inner rack ball joint |2.2.B.1f| | 1 |
| Emissions not tested not tested as water leak |7.4.B.1| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp n/s and o/s have bad earths |1.1.A.3f| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner wheel arch, prescribed area |6.1.B.2| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEDARSIDE AND OFFSIDE (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEARSIDE AND OFFSIDE INNER ARCHES (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner x2 (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger / side (6.2.2 (d) (i)) | 1 |
| Nearside Front coil spring modified and seriously weakened |2.4.A.2| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 5.0+ (8.2.2.2 (f)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near to spring hanger |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near to spring hanger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion inner and outer sill |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion inner and outer sill |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp flashes with indicator |1.1.A.3f| | 1 |
| Offside Front Upper brake caliper securing device loose bolt |3.5.1j| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both chassis ton bulkhead |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r inner and outer sill 30 cm of rear spring hanger |2.4.A.3| | 1 |
| Nearside Front Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Front Body has a projection caused by corrosion bumper |6.1.C.1| | 1 |
| Offside Front Outer Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger chassis is holed and corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger chassis is holed and corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill is heavily corroded near the rear spring front hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Body component corroded and likely to cause injury body panel (6.2.1 (a) (i)) | 1 |
| Nearside Entrance/exit door damaged and likely to cause injury |6.2.C.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg underbonnet |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg underbonnet |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearward hanger in four areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearward hanger in four areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward hanger in three areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward hanger in three areas |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded undersill panel |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded undersill panel |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower valance panel |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch in four areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/out rigger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/out rigger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength drop sill near rear spring front mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength drop sill next to rear spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded drop sill next to front spring eye |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch and floor to arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch and floor to arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg various |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg various |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg various |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis member |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole and corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension arm ball joint dust cover missing |5.3.4 |b| |ii|| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt dust cover split |5.3.4 |b| |ii|| | 1 |
| Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer cill (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nr tank |6.1.1 |c| |i|| | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger box |6.1.B.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp with side lamp/fog lamp |1.4.A.2h| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch x2 areas |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DRIVER STEP - UNDERSIDE |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS - OFFSIDE REAR |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSR SILL |6.1.B.2| | 1 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded both sides top shock absorber mounting points |2.4.A.3| | 1 |
| Front Upper Suspension component mounting prescribed area is excessively corroded both sides inner wings by strut mounting points |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor panel to inner sill at door step |5.2.6| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced By rear wheel arch (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure tank strap (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f chassis corroded (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing corroded (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s /r chassis corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded near bump stop (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded near bump stop (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear hanger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie and floor area as marked |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor as marked |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassie as marked |3.3.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outter sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount x3 areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount x3 areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount inner sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded engine bay chassis leg corroded next to engine mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SIL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER WING AREA |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER WING AREA |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases MID AND REAR |7.1.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded backing sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded back of step |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL TUB/FLOOR |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEEL TUB/FLOOR |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL/ARCH |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL/B-POST |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS OUTRIGGER |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement wishbone rear bush |2.4.G.2| | 1 |
| Offside Front Driver`s seat insecure seat broken |6.2.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering within 30cm of brake load sensor valve mounting point |6.1.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion floor |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion floor excessive corrosion within 30cm of rear off side seat mounting point |6.1.C.1| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle side load door |6.2.B.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear spring front mtg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear spring rear mtg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring rear mtg |2.4.A.3| | 1 |
| Nearside Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded nearside rear chassis by load sensing valve |3.3.A.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded both outer sills/inner sills |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both outer sills/inner sills |5.2.6| | 1 |
| All position lamps adversely affected by the operation of another lamp operate with brake lights - electrical fault |1.1.A.3f| | 1 |
| Front wheel bearing has excessive play nearside |2.5.A.3c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill, front of rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis underside |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outriggers near front and rear spring eyes |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner arch |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outersill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outersill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Innersill front to rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner sill to rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour Light lens broken |1.1.A.3e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at load compensator |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor at shocker mount |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is severely distorted chassis rail |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearmost outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearmost outrigger |2.4.A.3| | 1 |
| Offside Inner Body has a projection caused by corrosion sill x 2 |6.1.C.1| | 1 |
| Central Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill multiple holes (6.2.2 (d) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting X2 |6.2.2 |d| |i|| | 1 |
| Offside Front Headlamp light intensity severely reduced dip beam |4.1.4 |a|| | 1 |
| Offside Front Headlamp light intensity severely reduced main beam |4.1.4 |a|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded Front and centre of the sill corroded with holes |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill corroded with a hole |2.4.A.3| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting floor /step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring chassis box (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring chassis box (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring chassis box (5.3.6 (a) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting central sill (6.2.2 (d) (i)) | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch [rear] |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded osf inner sill/door step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/door step rotten and not attached |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor/wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger rear of wheel |2.4.A.3| | 1 |
| Rear Stop lamp(s) all not working nsr osr (4.3.1 (a) (iii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearward hanger mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearward hanger mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward hanger mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded seat mounting point |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch in two areas |2.4.A.3| | 1 |
| Offside Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Offside Rear Torque/reaction arm fractured |2.4.G.1| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill and door post (6.2.2 (d) (i)) | 1 |
| Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
| Windscreen in an unacceptable condition cracked and stickers |3.2 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area - chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area - chalked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area chalked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch and pannel |2.4.A.3| | 1 |
| Centre Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded both sides inner arch |5.2.6| | 1 |
| Front Position lamp not working ns+os (4.2.1 (a) (ii)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength ns+os inner sills (5.3.6 (a) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mountings ns+os (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on chassis rear of top shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near rear leaf mount on outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded lower inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer part of outrigger near rear leaf mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near rear leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near front leaf spring mount |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner lower step |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch forward of subframe mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on outrigger near leaf mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch down from top strut mount |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills as chalked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills as chalked |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front inner flitches as chalked |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear as chalked |2.4.G.2| | 1 |
| Central Rear Passengers seat insecure rear seat not fixed (6.2.6 (a) (ii)) | 1 |
| Rear Seat belt anchorage loose both bolts missing seat belt not attached (7.1.1 (b)) | 1 |
| Central Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Central Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cab body |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wing |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wing |6.1.B.2| | 1 |
| Nearside Rear Brake lever has abnormal movement of levers indicating excessive wear |3.5.1f| | 1 |
| Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Front Lower Floor excessively deteriorated step (6.2.4 (a) (i)) | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced inner wing (6.1.1 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner to outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner to outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis. rear spring front mount. (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Offside Front Lower brake caliper securing device excessively deteriorated |3.5.1j| | 1 |
| Offside Front Track rod end ball joint has excessive play outer |2.2.B.1f| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near side and offside chassis to sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis to wing attachment |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind leaf spring mount |6.1.B.2| | 1 |
| Central Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings this vehicle is severly corroded in to many places to list |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded underside |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan and wheel arch |2.4.A.3| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle side loading door |6.2.B.1c| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch /floor |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over axle |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings times 2 all marked |6.1.B.2| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings times 3 all marked |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear sub-frame bush |2.4.G.2| | 1 |
| Central Front Statutory seat belt missing Connection stalk missing |5.1.1| | 1 |
| Rear Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired x3 |2.4.A.3| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floorpan |6.2.2 |d| |i|| | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Spring mount |6.1.1 |c| |i|| | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Spring mount |6.1.1 |c| |i|| | 1 |
| Front Body insecure Bumper (6.2.2 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both chassis legs (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area by x member |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area by x member |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner / outer |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member area |6.1.B.2| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases main box |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner bottom wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner back wheel arch to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner bottom wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner back wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis over axle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut prescribed area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut prescribed area (5.3.6 (a) (i)) | 1 |
| Brake hydraulic reservoir fluid level below minimum level first chamber empty? |3.6.G.1b| | 1 |
| Offside Front Body has a projection caused by corrosion bumper totaly insecure wing corroded away |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor / near seat left rear mount |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor / near right rear seat mount |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top panel / inner wing / inner arch.. |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top panel / inner wing / inner arch. |2.4.A.3| | 1 |
| Front Upper Fuel pipe leaking |7.2.3| | 1 |
| Offside Outline marker lamp missing both |4.2.1 |a|| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn centre propshaft mounting |2.4.G.4d| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner chassis area |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member - above fuel tank |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member - above exhaust box |1| |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member - above exhaust box |2| |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cross member - above spare wheel |6.1.B.2| | 1 |
| Inner Seat belt anchorage prescribed area is excessively corroded sills |5.2.6| | 1 |
| Centre Exhaust has a major leak of exhaust gases box blowing |7.1.2| | 1 |
| Nearside Front Body has a sharp edge caused by damage front wing |6.1.C.1| | 1 |
| Offside Rear Hydraulic fluid leaking continuously posing a serious risk to road safety metal brake pipe (8.4.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced steps (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced steps (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded footstep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded footstep |5.2.6| | 1 |
| Stop lamp not working o/s n/s |1.2.1b| | 1 |
| Offside Outer Rear Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Track rod end ball joint has excessive play outer |2.1.3 |b| |i|| | 1 |
| Nearside Front Track rod end ball joint has excessive play outer |2.1.3 |b| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis frame |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded boot floor |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |full legnth| |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded boot floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded lower inner flitch |2.4.A.3| | 1 |
| Offside Rear Front fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |chalk mark| |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/arch |2.4.A.3| | 1 |
| Tailgate cannot be secured in the closed position only catching on first latch not fully latching closed |6.4.1| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle side |6.2.B.1c| | 1 |
| Offside Stop lamp not working dim when worked alone and off when worked with position lights op |1.2.1b| | 1 |
| Windscreen wiper not operating over a large enough area to give an adequate view parking too low and not clearing full screen area |8.2.1c| | 1 |
| Power steering component|s| inappropriately repaired resevoir insecure |2.3.7| | 1 |
| Undertray likely to become detached gear cable box undertray insecure (6.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear. |5.3.4 |a| |i|| | 1 |
| Towbar retaining device missing 2 bolts missing |6.6.3a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded all rear spring mounting areas and panel work severe corrosion |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired load area floor above chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in front of wheel |2.4.A.3| | 1 |
| Towbar attachment insecure hitch loose (6.1.6 (c) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine adv 4.67 (8.2.2.2 (b)) | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn rear spring eye bush (5.3.4 (a) (i)) | 1 |
| Towbar attachment insecure mounting bolts loose, tow ball moving (6.1.6 (c) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury bumper damaged and sharp (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back |2.4.A.3| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis outrigger |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner arch/chassis |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear cab crossmember |3.1.9| | 1 |
| Nearside Rear Brake pipe inadequately supported chassis holed and corroded at mounting. |3.6.B.1| | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab crossmember (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab inner corner (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill Area. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill Area. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind Wheel Body Area. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In Front Of Wheel Floor Area. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor shock mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill sill leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch by spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind bumper in corner (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount sill area |2.4.A.3| | 1 |
| Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened rear x member (5.3.3 (b) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn wishbone bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill door step (6.1.1 (c) (i)) | 1 |
| Offside Outer Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis |view from engine compartment |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing near outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger near spring front mounting |2.4.A.3| | 1 |
| Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Nearside Stop lamp not working loose wire |1.2.1b| | 1 |
| Nearside Rear Direction indicator not working loose wire |1.4.A.2c| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/s inner sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded N/s rear chassis outrigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/s rear chassis outrigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded N/s front chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan |shocker| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan |shocker| |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |brake compensator| |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |above the spare wheel| |2.4.A.3| | 1 |
| Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings X 4 |6.1.B.2| | 1 |
| Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIE |6.1.B.2| | 1 |
| Centre Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings infront of rear wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of rear wheel |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired Inner door step |5.2.6| | 1 |
| Centre Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis outrigger |2.4.A.3| | 1 |
| Nearside Front Body component corroded and likely to cause injury Wing |6.2.1 |a| |i|| | 1 |
| Nearside Rear Integral body structure strengthening plate or fastening insecure Floor to inner wheel arch corroded through and in secure |6.1.1 |b| |i|| | 1 |
| Offside Rear Integral body structure strengthening plate or fastening insecure Floor to inner wheel arch corroded through and insecure |6.1.1 |b| |i|| | 1 |
| Nearside Front Macpherson strut mounting corroded and seriously weakened Within 30cm of strut turret |5.3.3 |b| |i|| | 1 |
| Offside Front Macpherson strut mounting corroded and seriously weakened Within 30cm of strut turret |5.3.3 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg corroded through |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mount for leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill under step |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill under step |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt arm ball joint |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near front spring anchorage |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near rear spring anchorage |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near rear spring anchorage |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near front of spring anchorage |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |viewed under bonnet| |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle of chassis |6.1.B.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis near LAV valve |3.3.A.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected n/s spring anchor (5.3.6 (a) (ii)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic to sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassic to sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic to sill |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most x2 |2.4.A.3| | 1 |
| Nearside Front Body insecure and dangerous to other road users Bumper |6.1.B.1b| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp Bulb fitted incorrect. |1.1.A.3f| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light shows white light to rear |1.2.1e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted front of spring mount box section |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded lower under door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded lower under door step |5.2.6| | 1 |
| Nearside Front Headlamp not working on dipped beam intermittent |1.7.5a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back of spring mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back of spring mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under door step and outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under door step and outer sill |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sup top |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is severely distorted chassis |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded shocker top |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired outercill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer cill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner cill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired outercill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis leg near comp valve |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Bonnet retaining device ineffective all items under bonnet not checked due to failure to open |8.4.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outter sill has rot |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion inner sill has rot |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner step has rot |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner sill has rot |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner sill has rot on centre |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch as rot on bask off wheel arch |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch has rot on front off wheel arch |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg has rot |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg has rot |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering load sensor attachment to chassis |6.1.A.1| | 1 |
| Nearside Rear Upper Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under step sill |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring rear out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded vallance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded vallance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis / limit valve |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch/floor pan |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch floor pan |2.4.A.3| | 1 |
| Centre Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring rear mount area |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear end chassis area next to rear end leaf spring mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner w/arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired inner arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Rear Road wheel fixings not compatible (5.2.2 (d)) | 1 |
| Offside Rear Road wheel fixings not compatible (5.2.2 (d)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower swivel (5.3.4 (b) (ii)) | 1 |
| Emissions not tested Cooling fan disintigrated during test (8.2.2.2 (e)) | 1 |
| Offside Headlamp light source and lamp not compatible LED bulb fitted (4.1.4 (c)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower swivel (5.3.4 (b) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills, door step (7.1.1 (a) (i)) | 1 |
| Nearside Headlamp light source and lamp not compatible LED bulb fitted (4.1.4 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury wheelarch (6.2.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch to outrigger front of axle |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch to outrigger rear of axle |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded step - sub frame |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill - drivers |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill - |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill - fixed shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis - swing shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis- swing shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis - fixed shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill - fixed shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill - fixed shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis - shocker |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch - top mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch - front sub rear mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch - front sub rear mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch - top mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill in several places |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both centre / rear chassis rail outriggers |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear under sill panels |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch in several places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / inner flitch in several places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner flitch |5.3.6 |a| |i|| | 1 |
| Nearside Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded understep |5.2.6| | 1 |
| Nearside Front Suspension arm locating pin incorrectly positioned |2.4.G.3a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front and rear mount |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Inner Brake prescribed area is excessively corroded sill |1.1.21 |e| |i|| | 1 |
| Nearside Outer Brake prescribed area is excessively corroded sill |1.1.21 |e| |i|| | 1 |
| Offside Inner Brake prescribed area is excessively corroded sill |1.1.21 |e| |i|| | 1 |
| Offside Outer Brake prescribed area is excessively corroded sill |1.1.21 |e| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch |5.3.6 |a| |ii|| | 1 |
| Offside Front Body panel corroded and likely to cause injury step |6.2.1 |a| |i|| | 1 |
| Nearside Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r crossmember |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring hanger |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s chassis near shock mounts |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s inner sills near spring hangers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill near hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch near strut mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Spring hanger surroundings |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Inner step panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill / sill end |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Furthest rear outrigger x4 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Furthest outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Back box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Back box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Furthest rear floor pan x2 |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch and wing panel |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section across rear of vehicle |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in two sections corroded |6.1.B.2| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sil l.front to rear |2.4.A.3| | 1 |
| Nearside Rear Body component damaged and likely to cause injury lamp (6.2.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sides (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger support panel. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger support panel (6.1.1 (c) (i)) | 1 |
| Fuel pipe insecure (6.1.3 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing by engine mount |6.1.1 |c| |i|| | 1 |
| Rear coil spring broken x2 |2.4.C.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger several |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger several |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor several |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member several places |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor several |6.1.B.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger corroded |6.1.B.2| | 1 |
| Front Body insecure and dangerous to other road users TO RE AR INNER DECK |6.1.B.1b| | 1 |
| Nearside Rear Lower Body insecure and dangerous to other road users SIDE AND UNDER DECK TO CHASSIS |6.1.B.1b| | 1 |
| Offside Rear Lower Body insecure and dangerous to other road users SIDE AND UNDER DECK TO CHASSIS |6.1.B.1b| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings PANEL TO CHASSIS |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER STEP |6.1.B.2| | 1 |
| Lower Exhaust has a major leak of exhaust gases CENTER BOX |7.1.2| | 1 |
| Offside Front Lower Bonded suspension unit bonding failed and part of unit is likely to become displaced INNER WISH BONE BUSH |2.4.F.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings UNDER BONNET |6.1.B.2| | 1 |
| Statutory seat belt of the wrong type |5.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INSIDE WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring x2 rear bush |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount
|2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded valve mounting |3.3.A.2| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded centre to rear chassis area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and inner wheel arch area |2.4.A.3| | 1 |
| Offside Outer Front Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is inadequately repaired inner sills and doorsteps repairs tack-welded only |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired inner sills and doorsteps repairs tack-welded only |5.2.6| | 1 |
| Nearside Front Power steering component misaligned and steering adversely affected TIE BAR BENT |2.1.5 |e| |ii|| | 1 |
| Direction indicators adversely affected by the operation of another lamp front |1.4.A.2h| | 1 |
| Bonnet primary retaining device ineffective bonnet wont open from outside (3.1 (c)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre chassis |2.4.A.3| | 1 |
| Seat belt retracting mechanism defective second row centre seatbelt |7.1.2 |e|| | 1 |
| Front Exhaust has a part missing |6.3.1a| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Off side and near side floor area |2.4.A.3| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded Chassis area |2.4.A.3| | 1 |
| Braking system leaking Load compensator |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded IN 3 PLACES |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill repaired but not welded |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill repaired but not welded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is severely distorted door step and inner sill |2.4.A.3| | 1 |
| Nearside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Nearside Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill X2 |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill X2 |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis X 2 |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings X 1 |6.1.B.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill x2 |6.2.2 |d| |i|| | 1 |
| Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail next to gearbox mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring front mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring rear mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis near LSV |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings silll |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger front |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger front |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger rear |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spare wheel member |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings b post |6.1.B.2| | 1 |
| Supplementary Restraint System warning lamp indicates a fault airbag |5.4.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasse leg on the wheel arch |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side surround at leaf spring and shock absorber mounted area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mounted area-under vehicle |6.1.B.2| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mount |6.1.B.2| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Offside Rear Leaf spring anchor bracket inappropriately repaired |2.4.A.2| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded brake comp (1.1.21 (e) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s chassis |5.3.6 |a| |i|| | 1 |
| Nearside passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Inner Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Fuel system component leaking excessively or a risk of fire from pump (6.1.3 (b) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded many areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded many areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and door step (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and door step (5.3.6 (a) (i)) | 1 |
| Rear Shock absorbers has a serious fluid leak both |5.3.2 |b|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch and inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger by rear wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch to back of sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount ,box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount ,box section |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp & No. plate light affected by indicator |1.1.A.3f| | 1 |
| Nearside Inner Ball joint has excessive play steering rack end/tie rod |2.2.B.1f| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis near gear box mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis near engine mounting |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing near strut top |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis side |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis side |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger front of rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger front of rear spring hanger |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back near out riggers |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back near out riggers |6.1.B.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by load sensing valve |3.3.A.2| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill 2 holes |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill. |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear inner bush |2.4.G.2| | 1 |
| Brake relay lever has restricted free movement seized |3.5.1k| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis member |6.1.B.2| | 1 |
| Rear reflector more than 50% obscured offside and nearside covered up |1.5.1b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside centre to rear outrigger |6.1.B.2| | 1 |
| Centre Rear Brake load sensing valve inoperative |3.6.E.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing by strut (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by strut (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by strut (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel by step has a large hole (5.3.6 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear floor 30cm of mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear floor 30cm of mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis 30cm shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FRONT OF SPRING |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR OF SPRING |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded REAR OF SPRING |2.4.A.3| | 1 |
| Nearside Rear Brake back plate|s| securing device missing |3.5.1j| | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering wheel arch inner |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ceil |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ceil |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel box |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel box |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and rear step (7.1.1 (a) (i)) | 1 |
| Power steering pipe/hose excessively corroded pump feed to rack (2.1.5 (g) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill outer. (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front panel marked with yellow chalk. (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner well down to inner and outer sill corroded away. (5.3.6 (a) (i)) | 1 |
| Nearside Outer Outline marker lamp missing cental |4.2.1 |a|| | 1 |
| Nearside Front Seat belt anchorage loose bottom not fastened in |7.1.1 |b|| | 1 |
| Offside Front Seat belt missing clip |7.1.2 |a|| | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted wheel arch |6.1.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ADJACENT TO SPRING MOUNTING AREA (5.3.6 (a) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt SPLIT (2.1.3 (g) (ii)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded both inner sills/floor |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis at shock mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg and inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at shock mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing chewed ?? |5.2.2a| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill end holed. |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis rail .near shock mounting. also floor to inner wheel arch holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded very rear . chassis holed near spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded very rear area of spring mounting holed . x 2 . |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area holed . |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch holed near shock mounting . |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember in 2 places |6.6.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill and castleation area holed |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area holed |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch .small holed floor to inner arch |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner wheel arch /chassis rail end holed , |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded upper /inner wheel arch holed . |2.4.A.3| | 1 |
| Central Front Fuel pipe union leaking on pump |7.2.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded front of mc pherson strutt mounting area . |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill holed . |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` objects across dashboard |8.3.1e| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside and nearside inner and outer sill sections |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing and chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out riggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both out riggers |5.3.6 |a| |i|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chrossmember |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger all |2.4.A.3| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded strenghning bar |3.1.9| | 1 |
| Bonnet retaining device ineffective bonnet will not open |8.4.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear suspension spring surround |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear suspension spring surround |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis above axle bump stop bracket |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded floor step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassy x3 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassy x2 |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnett |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle to chassis |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded strut tops |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately clipped insecure across bulkhead |3.6.B.1| | 1 |
| Nearside Indicator tell tale inoperative on dash |1.4.A.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in wheel arch shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger both sides |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting most of rear box section corroded |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger corroded rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger corroded front of spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in wheel arch also near engine mount |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to crank pully |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength gearbox mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic by front spring hanger |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to rear wheel arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic under bonnet |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings three places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings two places |6.1.B.2| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings centre box section |6.1.B.2| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp flashes when hazard lights on |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back leaf spring mounting area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring anchor point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount
|2.4.A.3| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded Compensation Valve Mounting area |3.6.C.3| | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid wheel cylinder leaking with brake applied (1.1.16 (b) (i)) | 1 |
| Direction indicator not working ALL INDICATORS NOT WORKING (4.4.1 (a) (ii)) | 1 |
| Nearside Front Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NS OUTER SILL CORRODED (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL CORDODED (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH CORODED (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSEY AROUND BRAKE PIPE JUNCTION OLD PLATE COMMING AWAY FROM CHASSEY (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHHEL ARCH AND CHASSEY COROEDD (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting STEP CORRODED (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting UNDER REAR SILL CORODED (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH TO FLOOR CORODED (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSEY CORRODED AROUND FUEL TANK BRACKETS (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CROSS MEMBER BY WHEEL ARCH (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSEY AND WHEEL ARCH CORRODED (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH CORRODED (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill, also inadequately repaired |6.1.B.2| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member, by spring mounting point |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing. Behind drivers front wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail. next to rear brake load level sensing valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to outer sill. within 30cm of nearside rear leaf spring mounting point. |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area, close to leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor under passenger seat |5.2.6| | 1 |
| Offside Rear fog lamp not working Intermittent |1.3.2b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear of spring |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion chassie |6.1.C.1| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner door step to sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill by front spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by rear spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all lights pulsing |1.4.A.2h| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step, outer and inner sill ,holed |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step, outer and inner sill holed |5.2.6| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasss cross memeber |6.1.B.2| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| inner track rod |2.2.A.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top of chassis leg under bonnet |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing two areas |6.1.B.2| | 1 |
| Offside Position lamp not working side light |4.2.1 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering main chassie corroded above front sub frame (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chassie corroded brake valve loose on chassie n/s/r (6.1.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering main chassie corroded above o/s/r spring (6.1.1 (a) (ii)) | 1 |
| Offside Front Brake performance not tested o/s/f o/s/r n/s/r chassie excessive corrosion (1.2.1 (g)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced gearbox mounting (6.1.1 (a) (i)) | 1 |
| Drivers seat with a defective structure welded insufficient to seat base (6.2.5 (a) (i)) | 1 |
| Passengers seat with a defective structure welded insufficient to seat base (6.2.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing near door step |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/inner wing |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring carrier |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring carrier |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inner and outer |6.1.A.1| | 1 |
| Offside engine mounting bracket insecure and likely to fail due to corrosion |6.1.D.1b| | 1 |
| Brake fluid warning lamp inoperative must illuminate when parking brake engaged |3.6.G.2| | 1 |
| Nearside Trailer electrical socket damaged so that lead cannot be securely connected socket flap missing unable to secure lead |1.9.3b| | 1 |
| Nearside Rear Body has a sharp edge caused by damage OUTER SILL TO WHEEL ARCH |6.1.C.1| | 1 |
| Brake load sensing valve obviously incorrectly adjusted VEHICLE IS UNLADEN AND VALVE IS PUSHED TO FULLY CLOSED POSITION |3.6.E.3| | 1 |
| Rear Road wheel badly damaged |4.2.A.1a| | 1 |
| Nearside Rear Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer side sill |5.2.6| | 1 |
| Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and out rigger (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing to chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Offside Rear Outer Leaf spring anchor pin or bush likely to become detached front bush (5.3.4 (a) (ii)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury door step corroded (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury scill corroded from front tro back (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury door step holied (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by rear of leaf spring |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wing holed (6.2.2 (d) (ii)) | 1 |
| Rear Passengers seat insecure rear seat incorrectly fitted (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis to inner sill has a hole |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis in inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Cross member near shackles mount and tow bar mount |2.4.A.3| | 1 |
| Outline marker lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked yellow |two holes| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Front Position lamp adversely affected by the operation of another lamp comes on when braking |4.2.3 |c|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear bottom corner of cab |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch near strut |2.4.A.3| | 1 |
| Front Outline marker lamp not working offside & nearside (4.2.1 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced hole in cab and step area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn rear spring bush (5.3.4 (a) (i)) | 1 |
| Offside Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion at front wing |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion at front wing |6.1.C.1| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement at rear bush marked yellow |2.4.G.2| | 1 |
| Rear Fuel tank insecure strap broken (6.1.3 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced tipper body (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis /cross member drop link area |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage insecure bolt worn on bar |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage insecure bolt worn on bar |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and cross member |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis rail by load sensor |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear spring mount |2.4.A.3| | 1 |
| Nearside Front Seat belt missing Stalk (7.1.2 (a)) | 1 |
| Centre Rear Upper Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Brake pipe leaking on a hydraulic braking system Center rigid pipe (Corroded) (1.1.11 (b) (ii)) | 1 |
| Drivers door pillar insecure corroded (6.2.3 (c) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf springs mount as marked |2.4.A.3| | 1 |
| Offside Outline marker lamp not working middle |4.2.1 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch badly repaired |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis section badly repaired |5.2.6| | 1 |
| Nearside Front Position lamp not working Flashing (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working Flashing (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting outer sill |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside chassis |5.2.6| | 1 |
| Nearside Rear Electrical wiring damaged, likely to become detached |1.9.2b| | 1 |
| Offside Rear Electrical wiring damaged, likely to become detached |1.9.2b| | 1 |
| Offside Front Seat belt webbing significantly weakened badly frayed |7.1.2 |b| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired body step (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired body step (6.2.2 (d) (ii)) | 1 |
| Offside Rear Position lamp not working side light |4.2.1 |a|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded DRIVERS STEP - UNDERSIDE |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded REAR CROSSMEMBER - WHERE REAR BRAKE FLEXIS BOLTED |2.4.A.3| | 1 |
| Power steering inoperative notchy |2.3.3a| | 1 |
| Rear Rear position lamp|s| obscured more than 50% both rear lenses damaged |1.1.A.3c| | 1 |
| Rear fog lamp emits a light other than red Showing white to rear - due to broken lens |1.3.2e| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed sveral places |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced xmember holed |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cab holed several places |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner arches holed |6.1.1 |c| |i|| | 1 |
| Nearside Obligatory mirror missing cover missing |3.3 |a|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step holed |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor holed |6.1.1 |c| |i|| | 1 |
| Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outtrigger holed |6.1.1 |c| |i|| | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both |5.3.4 |b| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Horn sound not in accordance with requirements Harsh (7.7 (c)) | 1 |
| Nearside Front Brake disc significantly and obviously worn Warped (1.1.14 (a) (i)) | 1 |
| Offside Front Brake disc significantly and obviously worn Warped (1.1.14 (a) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner Arch (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner Arch (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush front |2.4.B.2| | 1 |
| Nearside Rear Body insecure and dangerous to other road users mud gard |6.1.B.1b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer sill area |5.2.6| | 1 |
| Nearside Rear Road wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Nearside Rear Road wheel fixing missing wheel nuts missing |5.2.1 |a| |i|| | 1 |
| Exhaust catalytic converter obviously modified (8.2.2.1 (a)) | 1 |
| Offside Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill
|6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre rear chassis |6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings o/s side step insecure |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inner wheel arch are ay engine mount |6.1.B.2| | 1 |
| Prop shaft joint excessively worn front two worn |6.1.7 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at step (6.1.1 (c) (i)) | 1 |
| Headlamp not working on main beam both fronts (4.1.1 (a) (ii)) | 1 |
| All position lamps not working all |4.2.1 |a|| | 1 |
| Nearside Outline marker lamp not working N/S Centre (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working O/S centre (4.2.1 (a) (ii)) | 1 |
| Offside Front Direction indicator likely to become detached Repeater light detached (4.4.1 (c) (ii)) | 1 |
| Nearside Direction indicator not working Repeater light (4.4.1 (a) (ii)) | 1 |
| Offside Floor excessively deteriorated Drivers cab step (6.2.4 (a) (i)) | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system On engine compartment bulkhead (1.1.11 (b) (ii)) | 1 |
| Rear Vehicle structure strengthening plate or fastening insecure Rear chassis extension not adequately secured (bolts missing) (6.1.1 (b) (i)) | 1 |
| Rear Body mounting fixings missing Multiple Flatbed to chassis fixing bolts missing (6.2.2 (c) (i)) | 1 |
| Nearside Front Floor excessively deteriorated Passenger door step (6.2.4 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn Rear prop centre bearing (6.1.7 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within 30cm of O/S/F suspension within wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Direction indicator not working Centre (4.4.1 (a) (ii)) | 1 |
| Upper Steering column shaft has excessive end float |2.1.3| | 1 |
| Offside Front Brake pipe inadequately supported flexi |3.6.B.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step holed |6.1.B.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is inadequately repaired on chassis |3.3.A.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor seat mount areas |5.2.6| | 1 |
| Offside Front Upper Integral body structure has excessive corrosion which adversely affects braking or steering veiw from under bonnet to the left |6.1.1 |c| |ii|| | 1 |
| Offside Front Power steering pipe/hose excessively corroded marked in yellow |2.1.5 |g| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced underside of vehicle marked in yellow |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced underside of vehicle marked in yellow |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer and underside sill marked in yellow |5.3.6 |a| |ii|| | 1 |
| Nearside Front Power steering component insecure fluid bottle adrift |2.1.5 |d| |i|| | 1 |
| Position lamp not working all front lights main and dip not working |4.2.1 |a| |ii|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded |6.2.2 |d| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel corroded |6.2.2 |d| |i|| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel corroded |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger within 30cm of nearside rear spring rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis where marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis where marked several places (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill chalked |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear of cab and inner sill |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis under brake fluid resevoir |2.4.A.3| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded crossmembers above diff numerous areas chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis chalked |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded 2 areas marked |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sills 2 areas marked |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded cross member near leaf spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member near anti roll bar drop links |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember near rear anti roll bar drop link |2.4.A.3| | 1 |
| Nearside Front Body has a projection caused by corrosion sill holed |6.1.C.1| | 1 |
| Front Body has a projection caused by corrosion both front shackle arms holed |6.1.C.1| | 1 |
| Rear Body has a projection caused by corrosion cross member holed |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion shackle |6.1.C.1| | 1 |
| Offside Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Front Vehicle structure excessively corroded within 30cm of towbar mounting towing eye |6.6.6| | 1 |
| Nearside Front Tie bar/rod locating pin insecure drop link |2.4.G.3a| | 1 |
| Rear Brake linkage has restricted free movement sensing valve |3.5.1k| | 1 |
| Brake pipe inadequately clipped brake pipes in engine cable tied together |3.6.B.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded by leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by leaf spring mounting and surrounding outriggers |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded by leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Sill corrosion |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at inner wing (5.3.6 (a) (i)) | 1 |
| Offside Headlamp aim headlamp not in good working order affecting the beam image |1.2.4b| | 1 |
| Offside Rear fog lamp does not emit a steady red light Lens broken (4.5.4 (a)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OSF chassis behind wheel, OSR front of wheel arch, NSR rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch |6.1.1 |c| |i|| | 1 |
| Centre Rear Emergency exit door cannot be opened from inside the vehicle |6.2.D.1a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sil |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sil |7.1.1 |a| |i|| | 1 |
| Exhaust system not adequately supported rear most mounting broken |7.1.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail at rear wheel arch |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail at rear wheel arch |6.1.A.1| | 1 |
| Nearside Stop lamp|s| adversely affected by the operation of another lamp by indicator |4.3.3 |b|| | 1 |
| Nearside Rear Loading door cannot be secured in the closed position lower catch not working |6.2.1 |e|| | 1 |
| Fuel pipe so insecure there is a risk of fire fuel cooler insecure |6.1.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to rear panel |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill to rear panel |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch x2 |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/doorstep x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x3 |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member x2 |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x 2 |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top |5.3.6 |a| |i|| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded rear of cab above fuel tank |5.2.6| | 1 |
| Steering column flexible coupling insecure to floor |2.1.5| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut top
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill by spring hanger . |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill by spring hanger . |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill by seat belt mounting |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill by seat belt mounting . |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mountingsill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mountingsill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength between spring mountings (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NEARSIDE FRONT OUTER AND INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL |2.4.A.3| | 1 |
| Nearside Inner Rear Road wheel distorted |4.2.A.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing and chassis rail |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floorpan |2.4.A.3| | 1 |
| Nearside Front brake drum in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside Front brake drum in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x3 |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch x4 |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded lower inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch/top strut mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded above bump stop and outer seal |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings plate lifting
|6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of spring hangar |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of spring hangar |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired sill not continuously welded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inside n/s/f wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inside o/s/f wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inside o/s/r wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded inside n/s/r wheel arch |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded front of n/s inner sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded front of o/s inner sill |5.2.6| | 1 |
| Steering component mounting prescribed area is excessively corroded inside o/s/f wheel arch |2.2.C.1h| | 1 |
| Steering component mounting prescribed area is excessively corroded inside n/s/f wheel arch |2.2.C.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill corroded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rearward leaf spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rearward leaf spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected forward leaf spring hanger (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger, 2x holes |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush `D` bush |2.4.G.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by leaf spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Road wheel fractured (5.2.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner rear quarter panel and out rigger |2.4.A.3| | 1 |
| Nearside Outer Front Track rod end socket spring weak |2.2.B.1e| | 1 |
| Offside Outer Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch-shock area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch/engine bay |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded bump stop mount x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded bump stop mount x3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mount x2 |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s + n/s/r inner wheel arches / chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r x member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis several places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis / inner arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis /inner arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded doorstep |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock mount| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |shock mount| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mount areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mount areas |2.4.A.3| | 1 |
| Nearside Front Outer Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Front Outer Obligatory mirror seriously damaged, affecting the rear view Main mirror glass missing (3.3 (b) (ii)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner door step corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer door step corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner door step corroded (6.1.1 (c) (i)) | 1 |
| Central Rear Prop shaft bearing excessively worn Rear rubber mount/bearing excessive movement (6.1.7 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x 3 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out riggers x2 |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Spring mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front of rear spring in sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded In sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded In sill |5.2.6| | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides |5.3.4 |b| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger front mount |5.3.6 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis Member inside wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outrigger holed |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outrigger holed |5.3.6 |a| |ii|| | 1 |
| Nearside Brake pipe likely to become detached or damaged Front to rear |1.1.11 |d| |ii|| | 1 |
| Offside Rear Lower Anti-roll bar linkage insecurely attached bolt loose |5.3.3 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top section of chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch next to coil spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch next to coil spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/f next to washer bottle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis next to mud flap (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to mud flap (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to brake compacitor (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis section - in engine bay (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section - front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section - front spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulkhead area - behind expansion tank (5.3.6 (a) (i)) | 1 |
| Offside Drivers door likely to open inadvertently or not remain closed (6.2.3 (b) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 3 holes (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Body panel insecure side panels (6.2.1 (a) (i)) | 1 |
| Rear Body panel insecure light panel (6.2.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x4 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i)) | 1 |
| Rear Body panel insecure panel (6.2.1 (a) (i)) | 1 |
| Offside Outline marker lamp not working rear & middle |4.2.1 |a|| | 1 |
| Power steering pipe/hose leaking into steering rack |2.1.5 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out riggers / chassis front and rear spring mounts |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis shock mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis comp mount |1.1.21 |e| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch x2 |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch x3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting area x4 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting area x9 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting area x6 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting area x11 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, shock mount area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor to sill area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor/floor to sill area |5.2.6| | 1 |
| Nearside Front Macpherson strut insecure on joint to hub assembly |2.4.G.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch x2 |6.2.2 |d| |i|| | 1 |
| Exhaust system not adequately supported rear exhaust mount |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of rear leaf spring/bumper |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded of rear leaf spring/bumper area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Front Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
| Nearside Inner Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp flasher and brake (4.2.3 (c)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer door sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed near spring and shock |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by spring and shock absorber |6.1.B.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush both front d bushes |2.4.G.2| | 1 |
| Nearside Inner Front Lower Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Outer Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x4 (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x3 (5.3.6 (a) (i)) | 1 |
| Front Prop shaft likely to become detached mount area corrosion |6.1.7 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded cross member to rear of cab |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside front inner wing by gearbox mount |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear inner arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside inner centre sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner centre sill |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill 2 |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill / door step |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill side door |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mounting x 3 places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front mounting and sill |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Cross member both sides |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Under floor |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Under floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leading spring mount area |marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leading spring mount area |marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded axle bump stop area |marked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Strut top |2.4.A.3| | 1 |
| Rear Seat belt insecurely fixed to the seat all rear belts not connected |5.2.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded and front |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of front spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of front spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load valve mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to cross member |6.1.B.2| | 1 |
| Offside Body has a projection caused by corrosion sills inner and outer corroded resulting in hole |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion outer sills corroded |6.1.C.1| | 1 |
| Speedometer clearly inoperative speedometer sits at about 12 to 15mph on stand still |6.7.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis member |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch hold 30 cm top mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch hold 30 cm top mount in 3 different places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mounting holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR leaf spring mounting point hold |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 30cm of top shock mounting ......VERY BADLY HOLD..... |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 30cm of top shock mounting ......VERY BADLY HOLD .... |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front eye (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded load sensing valve. (1.1.21 (e) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top suspension mounting. (5.3.6 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury entry step. (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger on chassis very badly hold has a number of holes 30 cm of rear leaf spring back mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing corroded and hold sharp edges |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength 30 cm spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering x 2 |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ineer wheel arch-hole now within 30cm of suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floorpan |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Front Front position lamp|s| adversely affected by the operation of another lamp position lamps illuminate when brake pedal applied |1.1.A.3f| | 1 |
| Nearside Rear Body has a sharp edge caused by damage light cluster |6.1.C.1| | 1 |
| Rear Stop lamp not working both nearside and offside |1.2.1b| | 1 |
| Nearside Front Lower Bumper damaged and likely to cause injury when grazed or contacted fog smashed |6.1.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension hanger mounting (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front most leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering rear spring mounting (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible (5.3.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering brake load valve mounting (6.1.1 (a) (ii)) | 1 |
| Offside Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing rear bush |2.5.B.3a| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides in several places (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arches in several places (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet behind air box /bulk head area/ (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arches (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill /wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Steering wheel has excessive movement up and down (2.2.2 (a)) | 1 |
| Offside Front Exhaust has a major leak of exhaust gases front of front box (6.1.2 (a)) | 1 |
| Nearside Front Seat belt retracting mechanism defective belt not returning twisted (7.1.2 (e)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring shackle mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front part of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear part of spring x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear part of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear areas x4 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded areas x5 |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch area x1 |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch floor |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded x frame |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch x2 |2.4.A.3| | 1 |
| Nearside Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
| Offside Front Headlamp insecure |4.1.1 |c|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nsf step |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nsf outter |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf &osr outter sill |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s sill holed in 4 plces |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s inner sill holed in 3 places |6.2.2 |d| |i|| | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting slam panel holed |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed in 3 places |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed in 2 places |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arcg holed in 3 places |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed in several places |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis holed |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nsr & osr floor holed |6.2.2 |d| |i|| | 1 |
| Offside Rear Brake valve leaking |1.1.7 |a| |i|| | 1 |
| Central Rear Brake pipe likely to become detached or damaged exhaust is rubbing the pipe |1.1.11 |d| |ii|| | 1 |
| Offside Front Power steering pump insecure |2.1.5 |d| |i|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded chassy |2.2.C.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear spring hanger |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded INNER WING MARKED WITH CHALK |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT SPRING HANGER |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded SHACKLE HANGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded SHACKLE HANGER |2.4.A.3| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings CROSSMEMBER |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG AT BULKHEAD (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RIGGER AT LEAF SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RIGGER AT LEAF SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CROSS MEMEBER (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis rail within 30cm of rear brake compensator (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor area (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor and shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor and shackle |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by bump stop |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded panel holed by shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section by shackle |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded panel holed by shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by leaf spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp brake light |1.4.A.2h| | 1 |
| Offside Seat belt flexible stalk damaged likely to lead to failure under load stiff to operate |5.2.4a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step X2 holes |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded X 2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength At rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength At rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength At front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength At front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and chassis |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement wishbone arm rear bush |2.4.G.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp flashing with indicator |1.1.A.3f| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed around rear spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed and badly corroded around rear spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed by bump stop |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering shackle mount |6.1.1 |c| |ii|| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering floor to wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid back plate wet |1.1.16 |b| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis rail (1.1.21 (e) (i)) | 1 |
| Rear fog lamp not working 382 bulb |1.3.2b| | 1 |
| Offside Upper Leaf spring cracked |2.4.B.1a| | 1 |
| Fuel tank insecure corroded strap |6.1.3 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step /inner sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing |7.1.1 |a| |i|| | 1 |
| Inner An item not tested |Manual| | 1 |
| Nearside Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Offside Front Brake pedal actuating lever has abnormal movement indicating excessive wear |3.3.A.1h| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings srping mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings srping mounting |6.1.B.2| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg near bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg near bump stop |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body/sill near out rigger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body/sill near out rigger |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounts area (5.3.6 (a) (i)) | 1 |
| Rear Oil leaking continuously from transmission posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
| Front Fuel tank insecure strap corroded |6.1.3 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded front leaf spring |2.1.2 |e| |i|| | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded leaf spring |2.1.2 |e| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch by engine mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 |6.1.1 |c| |i|| | 1 |
| Offside Rear Shock absorbers likely to become detached corroded |5.3.2 |a| |ii|| | 1 |
| Nearside Rear Shock absorbers likely to become detached corroded |5.3.2 |a| |ii|| | 1 |
| Nearside Front Outline marker lamp not working Sidelight not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion Holes within 30cm of leaf spring mount (X4 marked with chalk) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion Holes within 30cm of leaf spring mount (X4 marked with chalk) (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch has corrosion hole within 30cm of engine mount support bar fixing point (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn most rear (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear leaf spring brackets |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded inner chassis |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch near shocker mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /door step (7.1.1 (a) (i)) | 1 |
| Brake pipe inadequately clipped front to rears |3.6.B.1| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger by full filler (7.1.1 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s outriggers x4 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by sock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired cross member and chassis (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill hold (7.1.1 (a) (i)) | 1 |
| All position lamps adversely affected by the operation of another lamp all come on when brakes applied |1.1.A.3f| | 1 |
| Nearside Front Body has a sharp edge caused by damage door mirror back missing |6.1.C.1| | 1 |
| brake drum contaminated by oil |3.5.1h| | 1 |
| Offside Rear Towbar component excessively damaged |6.6.1| | 1 |
| Offside Rear Seat belt has a cut which has significantly weakened the webbing passenger seat |5.2.2a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage loose |7.1.1 |b|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock absorber |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and supporting panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner rear quarter panel and spring hanger bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear crossmember area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor/ door step |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill end in wheel arch |5.2.6| | 1 |
| Adjustable towbar locating pin excessively worn |6.6.5b| | 1 |
| Nearside Front Other passenger door likely to open inadvertently or not remain closed in the case of a sliding door side sliding door (6.2.3 (b) (i)) | 1 |
| Offside Ball joint has excessive play inner rack end |2.2.B.1f| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front of rear wheel arch inner |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front of rear wheel arch inner |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill closing |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 4 |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings closing panel |6.1.B.2| | 1 |
| Nearside Front Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, behind strut (5.3.6 (a) (i)) | 1 |
| Nearside Front Hydraulic brake calliper inadequately mounted bolts loose (1.1.16 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill end cap (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis by shock mounting (5.3.6 (a) (i)) | 1 |
| Central Front Upper Fuel pipe leaking engine (6.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake hose excessively stretched on lock (1.1.12 (b) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg in engine bay from above |2.4.A.3| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle side door |6.2.3 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Service brake lagging in operation staying on when brake released (1.2.1 (d)) | 1 |
| Nearside Lower Suspension component mounting prescribed area is excessively corroded outer and under sill along the whole length |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis [engine compartment] (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis[inner wheel arch] (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced outrigger (6.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 1 |
| Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mounting, outrigger |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mounting, chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded valance areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded valance areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger bracket |2.4.A.3| | 1 |
| Nearside Rear Leaf spring linkage pin excessively loose in its bracket bolt loose |2.4.B.3a| | 1 |
| Nearside Front Inner Anti-roll bar has excessive play in a pin/bush "D" bush |2.4.G.2| | 1 |
| Offside Front Inner Anti-roll bar has excessive play in a pin/bush "D" bush |2.4.G.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and inner arch |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at rear |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis suspension mounts |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension mounts |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by shock absorber mount |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis rail |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis rail |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front mount. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount. |2.4.A.3| | 1 |
| Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Brake cable modified and seriously weakened |3.5.1n| | 1 |
| Nearside Anti-roll bar severely distorted |2.4.G.1| | 1 |
| Nearside Rear Leaf spring eye defective |shackle| leaf eye broken |2.4.B.1b| | 1 |
| Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis two places |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis in engine bay |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded offside rear front subframe mount |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill /step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer step and sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab rear upper |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop link mount (5.3.6 (a) (i)) | 1 |
| Rear Upper Leaf spring shackle pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Rear Upper Leaf spring anchor pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Fuel tank insecure rear tank strap corroded (6.1.3 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around spring hanger |6.1.A.1| | 1 |
| Rear Passenger`s seat insecure bench seat strap holding seat in |6.2.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front end of rear spring and chassis above bump stop holed |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above bump stop holed |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill below step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill below step |6.1.B.2| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner and outer |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering springer hanger mountings on front and rear of spring |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering springer hanger mountings on front and rear of spring |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop area |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop area |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step area |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear, spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by front spring hanger |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By spring fixing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner leg holed 12in or more |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired door step not welded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded by load valve |1.1.21 |e| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg in engine bay |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner body to chassis |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 1 |
| Power steering component|s| leaking from a failed seal rack |2.3.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner archs front and rear.both sills inner and outer. rear chassis |6.1.B.2| | 1 |
| Prop shaft bearing excessively worn 2nd. (6.1.7 (b) (i)) | 1 |
| Rear All position lamps adversely affected by the operation of another lamp Affected by hazard light operation. (4.2.3 (c)) | 1 |
| Nearside Front Road wheel fixing loose x2 (5.2.1 (a) (i)) | 1 |
| Nearside Front Upper Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour light unit damage |1.1.A.3e| | 1 |
| Offside Front Outer Obligatory mirror seriously damaged, affecting the rear view door mirror glass broken |3.3 |b| |ii|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch chassis corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch chassis corroded |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer step corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer steps corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch floor to chassis corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner arch floor to chassis corroded |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leafspring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leafspring |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis top by engine mounting |2.4.A.3| | 1 |
| Rear Battery insecure leisure battery in rear of vehicle |1.9.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg and inner wheel arch. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg and inner wheel arch. (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area and sill. (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step area and sill. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded Brake load sensing valve. (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring. (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill. (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill. (6.1.1 (c) (i)) | 1 |
| Rear Brake valve corroded and excessively weakened broken away from vehicle |3.6.A.2b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near bump stop |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner quarter panels |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wheel arches/floors/outriggers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front mount marked in yellow. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mount marked in yellow. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front mount marked in yellow. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mount marked in yellow. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near top strut mount marked in yellow. (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system not adequately supported rear tail section |7.1.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine cross member area ,chassis,inner wing and under bonnet top of chassis rail |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail above bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front most leaf spring area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back most leaf spring area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back most leaf spring area |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement back most |2.4.G.2| | 1 |
| Engine MIL inoperative or indicates a malfunction glow plug light flasing (8.2.1.2 (h)) | 1 |
| Nearside Front Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Bonded suspension unit attachment corroded and seriously weakened sill (5.3.1 (b) (i)) | 1 |
| Nearside Rear Bonded suspension unit attachment bracket corroded and seriously weakened box section by rear spring eye bush (5.3.1 (b) (i)) | 1 |
| Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front spring eye bush (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering bump stop and load valve area |6.1.1 |c| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top suspension mount strut 30cm |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring hanger |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis corroded |2.4.A.3| | 1 |
| Headlamp not working on dipped beam nsr poss ible start of hub seal leak |1.7.5a| | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Flitch |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out riggers |6.2.2 |d| |i|| | 1 |
| Offside Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 1 |
| Nearside Rear Brake drum contaminated with oil |1.1.14 |b|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear under sill/closing panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear under sill/closing panel |2.4.A.3| | 1 |
| Headlamp aim beam image obviously incorrect n/s & o/s |1.8.A.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch and chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch |6.1.1 |c| |i|| | 1 |
| Exhaust system insecure pipe to box |6.1.2 |a|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury arch |6.2.1 |a| |i|| | 1 |
| Front Power steering ram|s| leaking from a seal |2.3.1b| | 1 |
| Nearside Inner Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Nearside Outer Rear Statutory seat belt missing |5.1.A.1| | 1 |
| Centre Power steering component|s| leaking |2.3.1b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole of o/s sill, and n/s/r sill |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear chassis rails/leaf spring area, o/s/f chassis leg/inner wing, n/s/f chassis leg |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill, front to rear |5.2.6| | 1 |
| Nearside Rear Lower Fuel tank insecure |7.2.1| | 1 |
| Offside Rear Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor near shock |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor near shock |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis above axle |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced SILL |6.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced STEP |6.1.1 |a| |i|| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced STEP |6.1.1 |a| |i|| | 1 |
| Nearside Prop shaft joint constant velocity boot no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced NS + OS |1.7.5a| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp too dim / |1.2.1f| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Front NS + OS sills |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded NS + OS sill / Rear inner wheel archs / Rear X member / Rear floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded NSF chassis rail by tank / OSF above sub frame mount on chassis rail |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering NS + OS sills |6.1.A.1| | 1 |
| Offside Suspension component ball joint dust cover no longer prevents the ingress of dirt and nearside front lower |5.3.4 |b| |ii|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and nearside rear |5.3.6 |a| |i|| | 1 |
| Front Front drive shaft coupling has a missing flange bolt |2.4.G.6c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi in verius places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outriggers |2.4.A.3| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill centre |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step underside |5.2.6| | 1 |
| Offside Front Seat belt webbing significantly weakened side stitching split weakening webbing |7.1.2 |b| |ii|| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement both lower arm rear bushes |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail within 30cms of top shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rearmost bush |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rearmost bush |2.4.G.2| | 1 |
| Rear Leaf spring has excessive side play at eye |shackle| all four bushes |2.4.B.4| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch area |6.2.2 |d| |i|| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill from front to rear this includes all of the bad repairs and filler |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch and sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both spring hangers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both spring hangers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out riggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out riggers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and across rear cross member |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and across rear cross member |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis all over. |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill from front to back |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure is deformed and structural rigidity is significantly reduced poor repair |6.1.1 |a| |i|| | 1 |
| Offside Rear Integral body structure is deformed and structural rigidity is significantly reduced poor repair |6.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mounting front and rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting chassis |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer wheel arch + chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch x2 + inner sill panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner + outer sill panels (5.3.6 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by engine mounting |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring mounting |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by load sensing valve |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by shocker |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Rear Upper Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by sub frame and engine mount |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg in wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area. |5.3.6 |a| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/engine mount area! (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill/wheel arch area! (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member near upper shock absorber mount. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wheel arch area. (5.3.6 (a) (i)) | 1 |
| Rear fog lamp adversely affected by the operation of another lamp Interfearance with reverse lights. |1.3.2f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded side step corroded |2.4.A.3| | 1 |
| Offside Rear Body insecure and dangerous to other road users wing |6.1.B.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe |6.1.B.2| | 1 |
| Offside Bumper insecure (6.1.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle outer chassis (5.3.6 (a) (i)) | 1 |
| Nearside Obligatory mirror insecure and rough edges (3.3 (b) (ii)) | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at handbrake cable mounting (1.1.21 (e) (i)) | 1 |
| Offside Stop lamp emits other than a steady red light lense broken |1.2.1e| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion sill |6.1.C.1| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing/flitch panel |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp all lamps flickering |1.1.A.3f| | 1 |
| Offside Rear fog lamp does not emit a steady red light lens broken |4.5.4 |a|| | 1 |
| Central Outline marker lamp not working Offside (4.2.1 (a) (ii)) | 1 |
| Central Outline marker lamp not working Nearside (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill x2 (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate 1.19
Reading 7.94 (8.2.2.2 (a)) | 1 |
| Rear position lamp|s| not working TWO REAR RUNNING LIGHTS N/S AND O/S |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s rear 2 places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s rear 2 places |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion both outer sills |6.1.C.1| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front chassis leg at engine mount |6.1.1 |c| |i|| | 1 |
| Integral body structure is fractured and structural rigidity is significantly reduced o/s front inner wing at engine mount |6.1.1 |a| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front inner wing at strut top mount |6.1.1 |c| |i|| | 1 |
| Body component corroded and likely to cause injury n/s front and rear body |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt installation has a seat fitted to a flat rail and the mounting bolt not passing through the leg, rail, floor, and a suitable structural member |10.1 |p|| | 1 |
| Nearside Body has a sharp edge caused by corrosion center outer sill |6.1.C.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing at top |2.4.A.3| | 1 |
| Offside Rear Body has a projection caused by corrosion Wheel arch insecure |6.1.C.1| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step/sill |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Step/sill |5.2.6| | 1 |
| Offside Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing |3.6.C.3| | 1 |
| Track rod end ball joint has excessive play o/s and n/s |2.2.B.1f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor and inner quarter panel |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step several places |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s and n/s as marked in several places |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s |6.1.B.2| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded o/s and n/s inner arches |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded top mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded offside front outer sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded very rear cross member area |2.4.A.3| | 1 |
| Nearside Seat belt retracting mechanism defective missing |5.2.5b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted wheel arch to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill and outer sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear under sill and outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded passenger step under vehicle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded driver step under vehicle |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded across vehicle |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis filled with filler |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis filled with filler |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member box section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked With Chalk (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked With Chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked With Chalk (5.3.6 (a) (i)) | 1 |
| Towbar locking device inadequate |6.6.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded limiter valve |3.3.A.2| | 1 |
| Offside Rear Direction indicator incorrect colour light unit broken |1.4.A.2f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch area |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded under passenger door step |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill gone |2.4.A.3| | 1 |
| Offside Front engine mounting bracket insecure and likely to fail engine mount prescribed area excessively corroded. allowing mounting to sink into chassis |6.1.D.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch/ engine mount area. looking from wheel arch behind wheel |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine mount area |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour hole in lens |1.1.A.3e| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by engine mount |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by front leaf spring |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by top shock mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by shock mount |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step by seat mount |6.1.B.2| | 1 |
| Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired centre sill |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch and sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under body |6.2.2 |d| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour lens damaged and showing white light |1.4.A.2f| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil corrosion |6.1.B.2| | 1 |
| Offside Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under rear of sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded under rear of sill |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember o/s and n/s |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under quarter panel |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under door step in several places |5.2.6| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie leg under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie leg rear (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced dxoor step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie outer (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassie (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassie (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top strut mount (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under front wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under door step |2.4.A.3| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing corroded sharpe edge (6.1.1 (c) (i)) | 1 |
| Position lamp light intensity significantly reduced brake lamps faulty puts lamps on (4.2.3 (a) (ii)) | 1 |
| Windscreen in an unacceptable condition broken n/s (3.2 (c) (i)) | 1 |
| Central Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked above axle |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked above axle |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings main chassis |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings off side inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside inner and outer sill/step |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings off side rear inner sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Off side rear chassis |6.1.B.2| | 1 |
| Nearside Rear Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Centre Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Brake load sensor valve area marked in yellow chalk |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked in yellow chalk chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked in yellow chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Marked in yellow chassis rail |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer rigger marked in yellow chalk |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer rigger marked in yellow chalk |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear outer rigger marked in yellow chalk |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill and side step marked in yellow chalk |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch marked in yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch marked in yellow chalk |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp When stop lights applied |1.3.2f| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill various places |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill various places |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill various places |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill various places |6.1.B.2| | 1 |
| Offside Inner Front drive shaft coupling is excessively worn bearing carrier |2.5.C.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis and floor in 5 areas |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor |6.1.A.1| | 1 |
| Rear Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 1 |
| Offside Track rod end ball joint has excessive play & Boot Split |2.2.B.1f| | 1 |
| Rear Brake hose excessively damaged Both Rear Flexi`s Fowling On Rear Lift |3.6.B.4d| | 1 |
| Nearside Parking brake inoperative on one side poor effort |1.4.1 |a|| | 1 |
| Offside Front Service brake lagging in operation slow to operate |1.2.1 |d|| | 1 |
| Exhaust has a major leak of exhaust gases Both centre silencers |6.1.2 |a|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar/striker plate fractured |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area/inner sill area/floor seam front end rear spring and shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill 30cm rear end rear spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area/inner sill area/floor seam area 30cm shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper chassis 30cm subframe mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in 3 places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 1 |
| Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly strut top mount broken |2.5.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch area 2 places |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded on chassis behind rear wheel |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded on chassis behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS WITHIN 30CM OF FRONT END REAR SPRING |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis supporting panel (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside chassis by fuel tank seat belt mount in floor just above (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front hanger |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering hanger |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering center |6.1.A.1| | 1 |
| Offside Driver`s seat moving inadvertently |6.2.5 |b| |ii|| | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by rear shock |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Vehicle structure is fractured and structural rigidity is significantly reduced by rear shock |6.1.1 |a| |i|| | 1 |
| Offside Rear Lower Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Front Wheel bearing rough when rotated and loose |5.1.3 |b| |i|| | 1 |
| Central Rear Lower Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring carrier area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring carrier area 2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring carrier area 3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring carrier area 4 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring carrier area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of leaf spring carrier area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/floor pan edge |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outriger to arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill in front of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/sill behind wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch holed |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner arch/sill rear of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded centre of wheel arch |2.4.A.3| | 1 |
| Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance Dull |1.2.1d| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp wrong bulb |1.1.A.3f| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Object hanging from rear view mirror |8.3.1e| | 1 |
| Nearside Anti-roll bar rubber bush deteriorated resulting in excessive movement roll bar to axle |2.4.G.2| | 1 |
| Offside Anti-roll bar rubber bush deteriorated resulting in excessive movement roll bar to axle |2.4.G.2| | 1 |
| Nearside Front Radius arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 1 |
| Nearside Rear Body insecure and dangerous to other road users 4 Body attachment points excessively corroded |6.1.B.1b| | 1 |
| Nearside Rear Body insecure and dangerous to other road users wheel arch attachment point excessively corroded |6.1.B.1b| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt grease present |2.4.G.2| | 1 |
| Nearside Front Lower Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front end |2.4.A.3| | 1 |
| Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings a post area |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer/inner sill area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill area/s |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer/inner sill areas |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis area |6.1.B.2| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp REAR STOPS,INDICATORS, SIDE LAMPS ALL FAULTY |1.2.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT AND REAR MOUNTS |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FRONT AND REAR MOUNTS |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger/ inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch strut top area (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch strut top area (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg
|2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill box section |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor/step area |5.2.6| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded load valve area |3.3.A.2| | 1 |
| Nearside Rear Inner Brake actuating linkage mounting prescribed area is excessively corroded arch |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg/spare wheel area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg/spare wheel area |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Seal |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Seal |5.2.6| | 1 |
| Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill & arch corner excessively corroded. |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Within 30cm of rear shackle |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Arm rear bush. (5.3.4 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bumper |6.1.B.2| | 1 |
| Nearside Rear Service brake: efficiency below requirements |3.7.D.4| | 1 |
| Nearside Rear Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting (6.1.6 (i) (i)) | 1 |
| Rear Trailer electrical socket likely to become detached (4.10 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill/jacking point (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected sill / suspension mount (5.3.6 (a) (ii)) | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both rear side ligths |1.1.A.3f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill x4 |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp indicator and side light. |4.4.3 |b|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded and repaired with suspect filler. |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded and repaired with suspect fibre glass. |6.1.1 |c| |i|| | 1 |
| Power steering component leaking seal leaking. |2.1.5 |a|| | 1 |
| Emissions not tested excessive smoke. |8.2.2.2 |e|| | 1 |
| Inner Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Rear Side repeater not working |4.4.1 |a| |ii|| | 1 |
| Rear Body component corroded and likely to cause injury chassis box corroded |6.2.1 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury inner seal corroded |6.2.1 |a| |i|| | 1 |
| Offside Inner Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Front Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases silencer. (6.1.2 (a)) | 1 |
| Exhaust emissions exceed manufacturers specified limit reading is 5.18. plate value is 0.75 (8.2.2.2 (a)) | 1 |
| Power steering component insecure reservoir |2.1.5 |d| |i|| | 1 |
| Nearside Rear Loading door cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted chassis |2.4.A.3| | 1 |
| Front Drive shaft which forms part of the suspension support bearing excessively worn PROPSHAFT |2.4.G.4d| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| at rack end joint |2.2.A.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by shocker (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed in 2 places (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed 2 places (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed 2 places (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer chassis (6.1.1 (c) (i)) | 1 |
| Rear Position lamp lens seriously defective |4.2.1 |b|| | 1 |
| Offside Body has a sharp edge caused by corrosion step |6.1.C.1| | 1 |
| Steering column shaft locking device insecure |2.1.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under bonnet |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis two areas |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step panel |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside inner sill
Offside front step/inner sill
Offside front inner arch
Nearside rear chassis |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded around foot step |2.4.A.3| | 1 |
| Front constant velocity joint is insecure Both |2.5.C.1b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear springs rear chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front of spring |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases front and center |7.1.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired inner sill shows bodyfiller |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis /inner wing |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis /inner wing |2.4.A.3| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg repair patch riveted on |6.1.B.2| | 1 |
| Central Exhaust system not adequately supported exhaust rubber mount missing |7.1.1| | 1 |
| Rear Exhaust system not adequately supported hanger missing |7.1.1| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings side step spot welded patch |6.1.B.2| | 1 |
| Offside Rear front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mount area |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint lower |2.4.G.2| | 1 |
| Rear Trailer electrical socket insecure insecure and broken wires |1.9.3a| | 1 |
| Brake fluid warning lamp illuminated brake fluid level low |3.6.G.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill x 2 |5.2.6| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill area x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/ outriger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded panel /chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger side panel area |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded chassis to floor between gearbox and chassis area |2.4.A.3| | 1 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative load sensing vaule seized |1.1.17 |c| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis / inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear shackle mount / chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (as marked) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear shackle mount / chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bumper valance / inner wing panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bumper valance / inner wing panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (as marked) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch / step (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch / step (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis above front subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded brake compensator area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded upper sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded upper sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill rear |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill rear |2.4.A.3| | 1 |
| Nearside Body has a projection caused by corrosion outer sill |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to w/arch |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner and outter sill |2.4.A.3| | 1 |
| Centre Exhaust has a major leak of exhaust gases two boxes |7.1.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis engine mount |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch / floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch / floor |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is severely distorted inner wheel arch side chassia |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch side chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing and chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innerwing and chassis |2.4.A.3| | 1 |
| Electrical wiring inadequately supported from battery to dash |1.9.2a| | 1 |
| Fuel system component leaking leak of or injector |7.2.3| | 1 |
| Exhaust emissions exceed manufacturers specified limit 0.68 limit applied (8.2.2.2 (a)) | 1 |
| Rear Shock absorber has an excessively worn bush both |2.7.4| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake cable modified and seriously weakened |3.5.1n| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside outer sill |5.2.6| | 1 |
| Central Rear Trailer electrical socket damaged so that lead cannot be securely connected flap missing |1.9.3b| | 1 |
| Offside Front Lower Brake pedal has insufficient reserve movement No pedal pressure |3.3.A.5| | 1 |
| Offside Front Outer Seat belt stitching badly frayed |5.2.2b| | 1 |
| Nearside Front Upper Brake pipe leaking brake pipe failed in rollers, front to back, 1 of 2 pipes |3.6.A.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded sill outer |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill inner |5.2.6| | 1 |
| Central Lower Exhaust has a major leak of exhaust gases middle box |7.1.2| | 1 |
| Offside Rear Upper Exhaust system not adequately supported bracket broken off |7.1.1| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded rear of spring |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Outer & inner lower sill |2.4.A.3| | 1 |
| Central Front Power steering pipe|s| or hose|s| leaking from a joint At steering rack |2.3.3b| | 1 |
| Offside Fluid suspension unit leaking |2.4.D.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured Door latch |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured Door latch |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to inner and outer wings, steps, sills all as marked |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at front spring hangers and rear as marked at tow bar mountings |6.1.B.2| | 1 |
| Offside Rear Brake hose inappropriately repaired |3.6.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet
|6.1.B.2| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings STEP/Floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step/floor |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Windscreen in an unacceptable condition damaged zone a |3.2 |c| |i|| | 1 |
| Side repeater incorrect colour ns+os |4.4.3 |a|| | 1 |
| Headlamp aim projected beam image is obviously incorrect ns+os |4.1.2 |c|| | 1 |
| Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
| Offside Inner Front Road wheel badly damaged |4.2.A.1a| | 1 |
| Offside Front Windscreen damaged and affecting the drivers view of the road BADLY CRACKED IN ZONE A (3.2 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements VERY QUIET (7.7 (c)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn WISHBONE ARM BALLJOINT (5.3.4 (a) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture FRONT TO REAR BRAKE PIPES UNSUPPORTED (1.1.11 (a)) | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering UNDERSTEP SILL AND PANEL (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired UNDERSTEP SILL AND PANEL (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS OUTRIGGER (6.2.2 (d) (i)) | 1 |
| Offside Rear Upper Leaf spring fractured (5.3.1 (b) (i)) | 1 |
| Front Horn sound not in accordance with requirements connection (7.7 (c)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced out sill holed (7.1.1 (a) (i)) | 1 |
| Offside Inner Emergency exit sign missing |9.1.2 |b| |ii|| | 1 |
| Nearside Front Upper All outline marker lamps not working |4.2.1 |a|| | 1 |
| Central Rear Trailer electrical socket |13 pin| not operating the trailer lamps as intended |4.10 |c| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inner wheel arch |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering lower inner arch |6.1.A.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner arch (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s f inner sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f/ outer sill (6.1.1 (c) (i)) | 1 |
| Leaf spring anchor bracket insecure both rear u bolts insecure (5.3.1 (a) (i)) | 1 |
| Nearside Rear Position lamp missing lens missing |4.2.1 |a|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner step area holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner backing sill holed |5.3.6 |a| |ii|| | 1 |
| Nearside Front Statutory seat belt missing locking mechanism |5.1.1| | 1 |
| Nearside Front Inner Radius arm rubber bush bonding deteriorated resulting in excessive movement rear most bush |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member within 30cm of nearside rear spring mounting |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced side sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced side sill (6.1.1 (c) (i)) | 1 |
| Inner Exhaust mounting missing |7.1.1b| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded SILL FRONT & REAR HOLED & CORRODED TO EXCESS |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded INNER SILL HOLED & CORRODED TO EXCESS |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion WHEEL ARCH CORRODED |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion WHEEL ARCH |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded front floor |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember +chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember +chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail |shock mount| |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is inadequately repaired inner chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is inadequately repaired flitch to chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is inadequately repaired flitch |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front chassis - front lower arm |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front inner arch |low down| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front inner arch - lower arm front mount area |2.4.A.3| | 1 |
| Rear reflector more than 50% obscured |1.5.1b| | 1 |
| Offside Steering locking device missing |2.1.3 |d|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt hub ball joint |2.4.G.2| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint hub ball joint |2.5.B.1a| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is fractured sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured chassis at bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked inside wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked inside wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Lower Macpherson strut insecure |2.4.G.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner and Outer seal below step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner and outer seal below step |5.2.6| | 1 |
| Bonnet primary retaining device ineffective unable to open (3.1 (c)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf inner chassis rail (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis blown out (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inadaquetly repaired (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced mid section of sill (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear wishbone bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Door Step |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Door Step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar fractured (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Inner Rear Valve stem seriously misaligned |4.1.D.1e| | 1 |
| Front Power steering pipe/hose corroded such that the steering is adversely affected front metal pipe corroded and leaking |2.1.5 |g| |ii|| | 1 |
| Central Exhaust system insecure centre exhaust insecure |6.1.2 |a|| | 1 |
| Offside Rear Anti-roll bar linkage insecure not done up |2.4.G.1| | 1 |
| Offside Horn not working |1.6.2a| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower |2.4.G.2| | 1 |
| Offside Upper Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 1 |
| Emissions not tested No water in engine |8.2.2.2 |e|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Underside floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to wheel arch corroded |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement lower arm rear bush |2.4.G.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine smoke was so excessive that meter could not be used to prevent damage to equipment |7.4.B.3b| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength various points (5.3.6 (a) (i)) | 1 |
| Emissions not tested excessively smokey (8.2.2.2 (e)) | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement saddle bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement saddle bush |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded at doorsteps inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded at doorsteps inner sill |5.2.6| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine emissions have been brought within limits but could be improved further |7.4.B.3b| | 1 |
| Nearside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Outer Rear Towbar component excessively damaged |6.6.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal at steering rack |2.3.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under front wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance and body panels at both ends within prescribed areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance and body panels at rear end prescribed areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill small hole (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Various areas (5.3.6 (a) (i)) | 1 |
| Prop shaft likely to become detached rear uj excessively worn (6.1.7 (a) (ii)) | 1 |
| Nearside Inner Front Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis above axle |6.1.B.2| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger going chassis corroded |6.1.1 |c| |i|| | 1 |
| Rear Other passenger door cannot be opened from outside the vehicle sliding door (6.2.3 (a)) | 1 |
| Bonnet primary retaining device excessively deteriorated bonnet cannot be opened (3.1 (c)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring hanger (outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (rear quarter (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure rear tank strap corroded through |7.2.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal top of rack |2.3.3b| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp both sides |1.2.1f| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow on sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow on sill |6.1.B.2| | 1 |
| Nearside Front Sub-frame locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Rear Leaf spring to axle securing nut insecure u-bolts |2.4.B.7b| | 1 |
| Nearside Rear Brake valve leaking load sensing valve |3.6.A.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |chalked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger |chalked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by spring mounting rust hole (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by rear spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring outer rigger with in 30cm (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded centre inner sill |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Sill several places |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner and outer in several places |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Box section near compensator |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch box section |2.4.A.3| | 1 |
| Rear Outline marker lamp lens seriously defective (4.2.1 (b)) | 1 |
| Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced out rigger (6.1.1 (a) (i)) | 1 |
| Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab pannel (6.1.1 (c) (i)) | 1 |
| Offside Front Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer wing
|6.1.C.1| | 1 |
| Nearside Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Radius arm has excessive play in a pin/bush rear bush |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan under battery (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bushes x2 |2.4.G.2| | 1 |
| Central Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch / top mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under vehicle |5.2.6| | 1 |
| Offside Rear Brake cable has wires broken and is significantly weakened park brake |3.5.1b| | 1 |
| Offside Front Upper Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sil |5.2.6| | 1 |
| Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer / lower face of chassis , above axle (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to rear of drivers step (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger to rear of wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer crossmember to rear of spring hanger , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer crossmember to rear of spring hanger , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounts (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger rear to x member (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount marked with yellow chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Body mounting fixings insecure Wheel arch (6.2.2 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch. X2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch X2 |5.3.6 |a| |i|| | 1 |
| Front Engine mounting bracket fractured Engine cross member corroded |6.1.8 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill around leaf spring mount. |5.3.6 |a| |i|| | 1 |
| Vehicle structure chassis main member corroded |6.1.2| | 1 |
| Front drive shaft bearing fastener fractured |2.5.C.1d| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Offside Rear Parking brake operation grabbing severely |3.7.C.3b| | 1 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Seat belt buckle missing 2nd row first seat |7.1.2 |d|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn most rear |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step/under sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded lower door step/under sill |5.2.6| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Inner Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp when brake operated |1.1.A.3f| | 1 |
| engine mounting bracket missing gearbox |6.1.D.1b| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND CENTRE CRASH BAR (6.1.1 (c) (i)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 3x places (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 4x places (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Rear Upper Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Outer Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced and n/s |1.7.5a| | 1 |
| Offside Rear Body insecure and dangerous to other road users mud guard |6.1.B.1b| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and n/s front inner wheel arches |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded and n/s inner steps |5.2.6| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x beam both sides |6.1.B.2| | 1 |
| Offside Rear position lamp|s| not working lamp damaged |1.1.A.3b| | 1 |
| Rear fog lamp not working damaged |1.3.2b| | 1 |
| Offside Direction indicator not working damaged |1.4.A.2c| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded and nearside inner and outer steps |5.2.6| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded and nearside front |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside front inner arches and o/s front under bonnet chassis rail |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded x member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at front of spring |2.4.A.3| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint and nearside front |2.5.B.1a| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outside chassis rail |6.1.B.2| | 1 |
| Offside Front Lower brake caliper securing device loose fixing |3.5.1j| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure to chassis |2.4.G.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded and nearside inner door sills and both inner steps o/s / n/s |5.2.6| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body |6.1.B.2| | 1 |
| Nearside Rear Leaf spring main leaf fractured front mounting (5.3.1 (b) (ii)) | 1 |
| Rear Brake pipe likely to become detached or damaged to flexi insecure (1.1.11 (d) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill and rear wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Service brake effort inadequate at a wheel o/s/r n/s/r (1.2.1 (a) (i)) | 1 |
| Track rod end ball joint has excessive play o/s/f ball joinr worn (2.1.3 (b) (i)) | 1 |
| Nearside Front Upper Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Upper Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Rear Brake relay lever locking device insecure |3.5.1l| | 1 |
| Offside Rear Brake relay lever locking device insecure |3.5.1l| | 1 |
| Central Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp does not operate immediately when selected on main beam |1.2.3a| | 1 |
| Fuel system component leaking injectors (6.1.3 (b) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury wheel arch sharp (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing, 2 locations |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside outer sill, 2 location |7.1.1 |a| |i|| | 1 |
| Front Bumper insecure Nearside section |6.1.4 |a| |i|| | 1 |
| All direction indicators not working ALL NEARSIDE (4.4.1 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt outer joint |2.4.G.2| | 1 |
| Rear Body has a sharp edge caused by corrosion bumber |6.1.C.1| | 1 |
| Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| passenger door cannot be opened from outside the vehicle side loading door and rear doors can not be opened checked for security of hindges etc |6.2.B.1c| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded doorstep |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded aronund front and rear leafspring mounts |2.4.A.3| | 1 |
| Nearside Front Front wheel bearing rough when rotated and play |2.5.A.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded innerwing area chassis corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill panel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill panel |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SEAL |6.1.B.2| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded feed to steering rack |2.3.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint on the steering rack joint |2.3.3b| | 1 |
| Front Brake disc significantly and obviously worn both |1.1.14 |a| |i|| | 1 |
| Driver`s seat with a defective structure mounting frame made of wood |6.2.5 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg x 2 |2.4.A.3| | 1 |
| Centre Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Offside Rear Leaf spring fractured at eye |2.4.B.1a| | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light lenses damaged showing white light (4.5.4 (a)) | 1 |
| Nearside Rear Upper All position lamps have a product on the lenses or light sources which significantly reduces light intensity showing white light (4.2.3 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (d bush) (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (d bush) (5.3.4 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn + front (6.1.7 (b) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor area to sill |5.2.6| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger to rear sill outer |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch / step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x 3 |2.4.A.3| | 1 |
| Offside Rear Brake pedal creeps down when held under pressure brake drops out |3.3.B.1a| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on the step |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside panels behind front wheels |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside inner sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside chassis |under drivers seat area| |5.2.6| | 1 |
| Rear position lamp|s| not working o/s |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front door steps |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front outrigger chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear outrigger chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner wing panels |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s front floor pan |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner and outer sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s front chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s rear chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s rear chassis |2.4.A.3| | 1 |
| Offside Front Seat belt stitching badly frayed |5.1.B.3c| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chalked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chalked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch |6.1.B.2| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by engine mount |6.1.B.2| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front/centre/rear inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre (5.3.6 (a) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury inner sill/step (6.2.1 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury inner sill/step (6.2.1 (a) (i)) | 1 |
| Nearside Front Brake pipe leaking bulkhead |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock area (5.3.6 (a) (i)) | 1 |
| Driving control|s| clutch pedal anti-slip provision loose |6.8.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center inner sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center outer sill (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded on inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded brake compansator valve |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded front spring mounting |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area inner |7.1.1 |a| |i|| | 1 |
| Brake pipe kinked pipe into load sensing valve |3.6.B.2b| | 1 |
| Body has a sharp edge caused by corrosion nearside & offside front wings |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded behind footwell cover |5.2.6| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure drop link bolt (5.3.3 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top |6.1.B.2| | 1 |
| Offside Exhaust mounting missing |7.1.1b| | 1 |
| Front Front suspension has excessive play in a pin or bush of an lower wishbone inner bearing |2.5.B.1a| | 1 |
| Offside Outer Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp with hazards/indicators |1.1.A.3f| | 1 |
| Offside Rear Body panel damaged and likely to cause injury Sharp edge on wheel arch. (6.2.1 (a) (i)) | 1 |
| Central Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill various places (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill various places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting bracket and inner sill of valance (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded within 30cm of spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring front mounting outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting bracket outrigger and inner sill of rear valance (5.3.6 (a) (i)) | 1 |
| Front All position lamps have less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Position lamp showing white light to the rear both (4.2.3 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassiss rail as seen from under bonnet |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure inner fixing bolt insecure |5.3.3 |a| |i|| | 1 |
| Offside Body component corroded and likely to cause injury / nearside front wings (6.2.1 (a) (i)) | 1 |
| Offside Service brake effort inadequate at a wheel and nearside rear (1.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sills - as chalked. (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - as chalked. (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded and nearside inner / outer steps / rear panels |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside front inner wheel arches |2.4.A.3| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Seat belt anchorage loose not bolted in |7.1.1 |b|| | 1 |
| Fuel tank insecure strap corroded. |7.2.1| | 1 |
| Offside Front Front drive shaft coupling is insecure bolts insecure |2.5.C.1c| | 1 |
| Nearside Rear Position lamp lens seriously defective when side lights and indicators on - everything flashes randomly |4.2.1 |b|| | 1 |
| Offside Rear Position lamp lens seriously defective when side lights and indicators on - everything flashes randomly |4.2.1 |b|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail corroded,shock abs area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis corroded ,leaf spring area |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis corroded,leaf spring area |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded siil corroded |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill corroded ,leaf spring area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion sill along whole length |6.1.C.1| | 1 |
| Offside Rear Front position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill as marked |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside rear |5.3.6 |a| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting marked in yellow chalk |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting marked in yellow chalk |6.2.2 |d| |i|| | 1 |
| Centre Front Inner Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top Of Chassis Leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top Of Chassis Leg / Inner Wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill As Marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In Front Of Leaf Spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Of Leaf Spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor To Wheel Arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear Of Leaf Spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Over Axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch To Floor (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind Door Step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting old patchwork needs redoing (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp levelling device obviously defective |1.7.2| | 1 |
| Nearside Upper Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail, next to fuel tank, area marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer and inner sill, areas marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, area marked with chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner wing area |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch top |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Rear position lamp|s| not working marker light inop |1.1.A.3b| | 1 |
| Offside Rear Rear position lamp|s| not working marker light inop |1.1.A.3b| | 1 |
| Nearside Rear position lamp|s| not working rear side marker inop |1.1.A.3b| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing to spring mounting |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage insecure bolt loose |2.4.G.1| | 1 |
| Offside Rear Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
| Offside Body has a sharp edge caused by corrosion and n/s rear |6.1.C.1| | 1 |
| Bonnet retaining device ineffective cant open |8.4.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer step |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view n/s/f door mirror glass |8.1.2a| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint pipes from res to pump leaking |2.3.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r |front spring mount area | |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r spring mount area |2.4.A.3| | 1 |
| Anti-roll bar attachment bracket/mounting insecure n/s/f arb drooplink assembly missing |2.4.G.1| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp stop and side light |1.4.A.2h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mounting area |2.4.A.3| | 1 |
| Nearside Emergency exit door does not latch securely closed |6.2.D.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step underneath |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Chassis leg |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Step underneath |2.4.A.3| | 1 |
| Prop shaft bearing excessively worn 2nd carrier |6.1.7 |b| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury Corrosion hole above bumper |6.2.1 |a| |i|| | 1 |
| Nearside Rear Floor in such a condition it is likely to cause load insecurity or instability Wheel arch / floor corroded & holed |6.2.4 |a| |ii|| | 1 |
| Offside Rear Floor excessively deteriorated Floor between rear spring shackle & cross member / inner sill |6.2.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Under passenger step , marked x2 |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Under drivers step , 3 location marked |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch / floor by shock mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of leaf spring , outrigger / inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring shackle mounting , outrigger / inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Shackle mounting to cross member |5.3.6 |a| |i|| | 1 |
| Nearside Inner Rear Brake hose leaking |3.6.A.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i)) | 1 |
| Brake performance not tested due to off side rear binding on (1.2.1 (g)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind exhaust (5.3.6 (a) (i)) | 1 |
| Offside Front Brake prescribed area is excessively corroded chassis (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring mounting area inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Door step |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring at rear fixing (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn arm |5.3.4 |a| |i|| | 1 |
| Centre Brake pedal anti-slip provision loose |3.3.A.1b| | 1 |
| Nearside Lower Dropside cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured rear cross member to hanger |2.4.A.3| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch |6.1.A.1| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp affected by direction indicator lamp |1.1.A.3f| | 1 |
| Offside Front Tie bar/rod attachment bracket/mounting rivet missing |2.4.G.1| | 1 |
| Nearside Front suspension has an insecurely locked unit in the upper support bearing assembly |2.5.B.3b| | 1 |
| Offside Headlamp aim beam image obviously incorrect NO PATTERN. |1.8.A.1b| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH ON OFFSIDE FRONT LOWER ARM COLLAPSED. |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top of chassis|engine bay| |2.4.A.3| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out side of spring and top mount (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at back of wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch 2 holes from engine bay out to inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering next to gearbox mounting point |6.1.1 |c| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, rear cross member and inner & outer sills |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill and jacking point |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Steering linkage ball joint has excessive play track rod joint/rack |2.1.3 |b| |i|| | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play track rod joint/rack |2.1.3 |b| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed |5.3.6 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anchor mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg inside wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded underside sill |2.4.A.3| | 1 |
| Rear Outer Suspension spring mounting prescribed area is excessively corroded both out riggers |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near front of leaf spring |2.4.A.3| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp earth fault |4.2.3 |c|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill old welding and filler |2.4.A.3| | 1 |
| Centre Rear Hinged tailboard cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outriggers, fore and aft of spring mountings. |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired Outer sill and return, spot welded only. Unable to fully assess condition of structure beneath repair. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired Chassis rail |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis rail. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outriggers, fore and aft of spring mountings |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Outer sill and return, spot welded only. Unable to fully assess condition of structure beneath repair. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Chassis rail |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Outer wing |6.1.C.1| | 1 |
| Nearside Rear Shock absorber insecure Nut missing from upper fixing |2.7.2b| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint bottom ball joint |2.5.B.1a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chalked areas |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring anchorage area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring hanger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger anchorage area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member front panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member front panel |2.4.A.3| | 1 |
| Front Position lamp not working Nearside and offside (4.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint swivel |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded side sill at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Rear All position lamps adversely affected by the operation of another lamp all (4.2.3 (c)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect bulb |4.1.2 |c|| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Leaf spring main leaf fractured front bush eye (5.3.1 (b) (ii)) | 1 |
| Offside Rear Leaf spring main leaf fractured front bush eye (5.3.1 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis below brake servo ,under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced inner arch ,chassis holed 3 places (6.1.1 (d) (i)) | 1 |
| Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced inner arch holed 2 places (6.1.1 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf eye (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring eye (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis near shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis near load valve (1.1.21 (e) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength step within 30cm of subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength step within 30cm of subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner (6.2.2 (d) (i)) | 1 |
| Nearside Inner Front Ball joint ball pin shank loose |2.2.B.1c| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced load compartment (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch in 2 areas (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch in 2 areas (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking near filter |7.2.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch front and rear of wheel |2.4.A.3| | 1 |
| Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated prop shaft rear bearing bush (6.1.7 (d) (i)) | 1 |
| Fuel system component leaking injector (6.1.3 (b) (i)) | 1 |
| Nearside Rear Inner Road wheel badly distorted inner rim (5.2.2 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by shock absober mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by shackle mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by shackle mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member by anti roll bar linkage mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected lens is broken |4.4.1 |b| |ii|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill by the door pillar |7.1.1 |a| |i|| | 1 |
| Driver`s door cannot be opened from outside the vehicle handle broken |6.2.3 |a|| | 1 |
| Rear Body insecure to the extent that stability is seriously impaired tipper hinge pin locking bolts missing O/S and N/S |6.2.2 |a| |ii|| | 1 |
| Nearside Rear Body component damaged and likely to cause injury mud guard sharp edge |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component damaged and likely to cause injury mud guard has a jagged edge |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced strp (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (in engine bay by front subframe mounting) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength tarret/inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg by anti roll bar link mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt hub (5.3.4 (b) (ii)) | 1 |
| Emissions not tested due to excessive black smoke (8.2.2.2 (e)) | 1 |
| Nearside Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings beside rearmost spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings beside rearmost spring hanger |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear end of sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings halfway along sill |6.1.B.2| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded rear of front sub frame |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded rear of front frame |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded wheel arch area near strut& frame mount |2.4.A.3| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings Inner Step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Step |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to spring hanger (6.2.2 (d) (i)) | 1 |
| Offside Front Wheel nut|s| loose x2 |4.2.A.1e| | 1 |
| Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis /inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch/chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded bulkhead |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis rail (5.3.6 (a) (i)) | 1 |
| Nearside Front Body has an unsafe modification inner and outer sill (6.2.1 (d) (i)) | 1 |
| Offside Front Body has an unsafe modification inner sill (6.2.1 (d) (i)) | 1 |
| Offside Front Body modification likely to adversely affect braking or steering inner step |6.2.1 |d| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner crossmember |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wiing |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis under the bonnet |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers step and inner sill |5.2.6| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis around the load sensing valve |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner body and rear crossmember around the spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor above the rear axle |2.4.A.3| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills and inner step |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quater and rear chassis |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter panel and chassis |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at load sensor valve |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at rear of inner sill |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and step inner |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi@ inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi at tow bar |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner valance |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corrosion to the areas at both ends of the nearside rear spring |2.4.A.3| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed inside engine bay within 30cm of engine mount (6.1.1 (c) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS inner steps holed within 30cm of mounts (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch rotten within 30cm of suspension and engine mounts (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS outer sills holed within 30cm of suspension mounts (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS inner sills rotten and holed within 30cm of suspension mounts (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill holed and sharp edges likely to cause injury (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS inner chassis holed within 30cm of rear spring front mounts (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Both NS & OS rear of rear spring mounts rotten and holed (5.3.6 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength slam panel holed within 30cm of rear spring mount areas (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS inner wheel arches both rotten and holed within 30cm of multiple suspension mount points (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Both NS & OS inner and outer chassis holed and rotten around susension mounts locations (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger several places |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded out sill several place |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at previous repair |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch several places |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch several places |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 1 |
| Front wheel bearing rough when rotated both sides |2.5.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper shocker chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper strut (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring bracket (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring bracket (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step panel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded and outer |2.4.A.3| | 1 |
| Offside Inner Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded several areas all marked with GOLD PAINT |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded several areas all marked with GOLD PAINT |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded UNDERSIDE OF STEP |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured inner wing |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is fractured both sides inner chassis under cab |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured lower chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured sill |5.2.6| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush droplink |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush droplink |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CROSSPANEL (5.3.6 (a) (i)) | 1 |
| Nearside Outer Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure Rear bolt worn/loose |2.4.G.1| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill by loading door (6.2.2 (d) (i)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion body |6.1.C.1| | 1 |
| Offside Track rod end excessively corroded and unserviceable |2.2.C.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |5.3.6 |a| |ii|| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp all lights flashing |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member by rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member by rear mount |2.4.A.3| | 1 |
| Offside Rear Upper Shock absorbers has an excessively worn bush Causing shock absorber too rub against chassis (5.3.2 (c)) | 1 |
| Nearside Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced all flooring within cabin / under seats (7.1.1 (a) (i)) | 1 |
| Prop shaft likely to become detached center of prop mounting area corroded to excess (6.1.7 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced area of leaf-spring rear mounting, cross member is corroded to excess (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced area of leaf-spring rear mounting, cross member is corroded to excess (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn axle "D" bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn axle "D" bush (5.3.4 (a) (i)) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill full length |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill full length |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill full length |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill full length |6.1.B.2| | 1 |
| Nearside Rear Brake pipe fouled by moving parts handbrake cable
|3.6.B.2a| | 1 |
| Nearside Inner Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Inner Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Nearside Indicator tell tale not working correctly |1.5.3| | 1 |
| Centre Seat belt fluffed or frayed sufficient to obstruct correct operation of the belt |5.1.B.3b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step marked in yellow |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step marked in yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring mounts marked in yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Prop shaft bearing excessively worn Both centre bearings |6.1.7 |b| |i|| | 1 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt FRONT HUB BALL JOINT DUST COVER |2.4.G.2| | 1 |
| Offside Stop lamp not working REAR |1.2.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper support rotten |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Step/sill (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D dush (5.3.4 (a) (i)) | 1 |
| Prop shaft bearing excessively worn front prop mounting (6.1.7 (b) (i)) | 1 |
| Centre Rear fog lamp not working |1.3.2b| | 1 |
| Brake load sensing valve linkage defective and function impaired missing |3.6.E.3| | 1 |
| Offside Front constant velocity joint gaiter missing |2.5.C.1a| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear most bush |5.3.4 |a| |i|| | 1 |
| Centre Rear Upper Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Nearside Front coil spring worn so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Front coil spring worn so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near leaf spring (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail corroding |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear leaf spring mounts |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to door step |6.1.B.2| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to door step |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Nearside Suspension arm ball joint excessively worn both front |5.3.4 |a| |i|| | 1 |
| Battery leaking |4.13 |b|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leg |2.4.A.3| | 1 |
| Central Rear Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Offside Front Upper coil spring incomplete |2.4.C.1a| | 1 |
| Inner Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Step area |5.2.6| | 1 |
| Rear Leaf spring anchor bracket cracked |2.4.B.6b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre and rear inner sills |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner doorstep,where marked |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner doorstep where marked |6.1.B.2| | 1 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing passenger |5.2.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch-floor pan section |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch-floor pan section |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and foor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch and floor |6.1.B.2| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill and floor |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch and floor |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor front and rear |6.1.B.2| | 1 |
| Offside Front Upper Headlamp not working on dipped beam |1.7.5a| | 1 |
| Rear Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arches |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arches |5.3.6 |a| |i|| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint as pipes go into steering rack. |2.3.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected OUT/RIGGER UNDER SILL |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Nearside Rear Wheel bolt|s| loose |4.2.A.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear hanger (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases tail pipe corroded (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hanger and out rigger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release not releasing under load |5.2.5a| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill/doorstep |5.2.6| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill/doorstep |5.2.6| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt boot split |2.4.G.2| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb incorrectly fitted? |1.8.A.1b| | 1 |
| Offside Rear Wheel hub spigot mounting excessively worn |4.2.B.5| | 1 |
| Front Steering column flexible coupling is excessively deteriorated |2.1.5| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking |3.6.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear n/s valence |2.4.A.3| | 1 |
| Offside Rear Outer Seat belt webbing significantly weakened second from rear |7.1.2 |b| |ii|| | 1 |
| Offside Rear Outer Seat belt retracting mechanism defective second from rear |7.1.2 |e|| | 1 |
| Supplementary Restraint System warning lamp indicates a fault air bag light flashing |5.4.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer and inner sill and step |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member both sides |6.6.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg under bonnet |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor |6.1.A.1| | 1 |
| Offside Rear Outer Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Power steering pipe|s| or hose|s| inappropriately repaired at rack insecure |2.3.7| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside of osf seat corroded - belt mounting part of seat |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under vehicle |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill under vehicle |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above leaf spring (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above leaf spring (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sill corroded (6.2.2 (d) (i)) | 1 |
| Retractable step not operating correctly (9.7 (b)) | 1 |
| Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Suspension arm attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Hydraulic brake calliper damaged and braking performance affected binding (1.1.16 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several areas |5.3.6 |a| |i|| | 1 |
| Body component corroded and likely to cause injury several areas |6.2.1 |a| |i|| | 1 |
| Prop shaft bearing excessively worn center rear |6.1.7 |b| |i|| | 1 |
| Prop shaft bearing excessively worn front bearing (6.1.7 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced B post (7.1.1 (a) (i)) | 1 |
| Offside Front Track rod end ball joint has excessive play inner arm |2.2.B.1f| | 1 |
| Leaf spring cracked AROUND SPRING EYE BUSH FRONT |2.4.B.1a| | 1 |
| Offside Front Position lamp not working side light inop (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Upper Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Front Lower Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
| Central Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Prop shaft joint excessively worn play in u/j |6.1.7 |c| |i|| | 1 |
| Offside Front Side repeater incorrect colour Lens cover is missing (4.4.3 (a)) | 1 |
| Nearside Front Body component damaged and likely to cause injury Wing mirror outer cover missing/sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury Wing mirror outer cover missing/sharp edges (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt Hub ball joint (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn Hub ball joint (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced And outer sill heavily corroded and hole by outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced And outer sill heavily corroded and hole by outrigger (6.1.1 (c) (i)) | 1 |
| Brake valve leaking Rear load valve (1.1.7 (d) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near engine mounting |under wheel arch| |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut mount |under wheel arch| |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |two spots| |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near rear leaf spring front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis rail near shock absorber mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near rear leaf spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring rear mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail near shock absorber mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired chassis rail near shock absorber mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger near rear leaf spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and mounting of rear leaf spring REAR mount |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by damage wing mirror has sharp edges due to casing damage |6.1.C.1| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp both front sidelight switching on when braking |1.1.A.3f| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near shock absorber |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch near top strut mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch near shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch near shock absorber mouning |2.4.A.3| | 1 |
| Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 1 |
| Nearside Body is excessively corroded seriously affecting its strength within 30cm of body mountings significantly reducing overall body security |6.5.9| | 1 |
| Centre Front Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Vehicle structure chassis cross member corroded |6.1.2| | 1 |
| Front front brakes release unevenly |3.8.A.2d| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded step /floor |2.4.A.3| | 1 |
| Central Hydraulic fluid leaking excessively |8.4.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Entrance/exit step significantly damaged Corroded holed |9.7 |a| |ii|| | 1 |
| Nearside Rear Entrance/exit door damaged and function impaired Wont open from outside |6.2.C.1a| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp All Lights |1.1.A.3f| | 1 |
| Offside Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Braking system leaking load sensor valve |3.6.A.1| | 1 |
| Nearside Front Body panel damaged and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Offside Body panel damaged and likely to cause injury side door |6.2.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg x2 |6.1.1 |c| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2 |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected corner up the top |5.3.6 |a| |ii|| | 1 |
| Offside Front Power steering component|s| leaking steering rack pinion pipes |2.3.3b| | 1 |
| Nearside Front Braking system leaking caliaper banjo joint |3.6.A.1| | 1 |
| Offside Front Braking system leaking caliaper banjo joint |3.6.A.1| | 1 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over missing bump stops both sides |6.1.B.2| | 1 |
| Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bushes both sides |2.4.G.2| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance both |1.1.A.3d| | 1 |
| Stop lamp excessively damaged so that it is not visible from a reasonable distance both |1.2.1d| | 1 |
| Fuel system component leaking No 4 injector wet with fuel |7.2.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower box section |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner lower sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner lower sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength FRONT LEAF SPRING MOUNTING... |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength TOP STRUT MOUNT INNER WING AREA... |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength INNER WING AREA... |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength INNER WING AREA... |5.3.6 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired SEZID LINKAGE... |1.1.17 |a|| | 1 |
| Body panel corroded and likely to cause injury tail board |6.2.1 |a| |i|| | 1 |
| Fuel system component leaking on engine around no 4 injector |7.2.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s outer weakened by corrosion (7.1.1 (a) (i)) | 1 |
| Offside Rear Dropside cannot be secured in the closed position locking peg mising sideboard (6.2.1 (e)) | 1 |
| Brake pedal anti-slip provision worn smooth anti slip worn (1.1.2 (c)) | 1 |
| Nearside Front Body panel insecure wing |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded flitch (1.1.21 (e) (i)) | 1 |
| Centre Rear Inner Suspension spring mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch under bonnet (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure excessive corrosion both tank straps |6.1.3 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch and rear of sill (6.2.2 (d) (i)) | 1 |
| Nearside Stop lamp emits other than a steady red light lamp lens damaged |1.2.1e| | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear most bush |as marked| |2.4.G.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering Sill |6.1.A.1| | 1 |
| Rear Parking brake lever has excessive movement indicating incorrect adjustment lever has no reserve travel (1.1.6 (c)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides , upper turret mounting inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Inner Ball joint has excessive play track rod arm |2.2.B.1f| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering The underside of this van is heavily corroded everywhere. |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mounting x2 areas |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded under the offside rear arch |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded under the nearside rear arch |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded under the offside front floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis plate requires more weld |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner and outer sills |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock absorber |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock absober |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by leaf spring hanger |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by engine mounting |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassi under inner wing |2.4.A.3| | 1 |
| Fuel tank insecure Both tank straps |7.2.1| | 1 |
| Nearside Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Front Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Brake load sensing valve missing where fitted as standard link rod |1.1.17 |d|| | 1 |
| Rear Brake disc significantly and obviously worn both sides |1.1.14 |a| |i|| | 1 |
| Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step to sill and arch areas both sides |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis several areas |6.1.1 |c| |i|| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings DRIVERS STEP ROTTEN |6.1.B.2| | 1 |
| Nearside Front Outer Seat belt damaged sufficient to significantly weakened the webbing SMALL HOLE AND CUT |5.2.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under car sill |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner sill to step/ outriggar |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill to step/outriggar |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all over chassis and body |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp with indicator on |1.1.A.3f| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis leg in engine bay |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is fractured chassis leg in engine bay |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded end of sill inner wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill wheel arch area |2.4.A.3| | 1 |
| Power steering component|s| leaking power steering pump area |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind bumper inner quarter panel area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind bumper inner quarter panel area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg more than 1 place |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg inner wheel arch area |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch/inner wing area |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch/inner wing area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill door step area |5.2.6| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at leaf mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at leaf mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at door step |6.1.B.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush lraf mount bush |2.4.B.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearmost spring shackle |2.4.A.3| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush drop link |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front under body edge within 30cm of spring mount |5.3.6 |a| |i|| | 1 |
| Central Rear Seat belt locking mechanism does not secure or release dose not unclip |5.2.5a| | 1 |
| Offside Front window|s| missing side window |6.9.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing beside engine mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Area around chassis leg |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Around rear chassis leg and rear spring mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member middle and end |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Track rod end deformed and unserviceable |2.2.C.1d| | 1 |
| Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inside sill corroded, both N/S &O/S |6.2.2 |d| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured Spring eye (5.3.1 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Crossmember by spring eye , marked A (5.3.6 (a) (i)) | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded Handbrake compensator mount , marked (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember to rear of axle, corroded & holed , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember by spring shackle , both faces , marked (5.3.6 (a) (i)) | 1 |
| Centre Front Seat belt anchorage prescribed area is excessively corroded Cross member next to fuel tank |5.2.6| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner cill (6.2.2 (d) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired Leaking (1.1.17 (a)) | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d shape bush |2.4.G.2| | 1 |
| Nearside Rear Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement link bush |2.4.G.2| | 1 |
| Offside Upper Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn mounting bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn mounting bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch by suspension andsubframe mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak oil going over brake |2.7.3| | 1 |
| Nearside Front Headlamp aim headlamp not in good working order affecting the beam image |1.2.4b| | 1 |
| Nearside Front Lower Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded VARIOUS PLACES |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded VARIOUS PLACES |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded front of rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of reae |2.4.A.3| | 1 |
| Rear Rear fog lamp switch faulty |1.3.1a| | 1 |
| Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills all around |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Offside Rear Body insecure and dangerous to other road users mudguard |6.1.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis and inner wheel arch panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hangar outrigger |2.4.A.3| | 1 |
| Trailer electrical socket insecure both |1.9.3a| | 1 |
| Trailer electrical socket damaged so that lead cannot be securely connected both |1.9.3b| | 1 |
| Brake pedal anti-slip provision incomplete and clutch rubber split |3.3.A.1b| | 1 |
| Power steering pipe|s| or hose|s| leaking at steering rack |2.3.3b| | 1 |
| Inner Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near suspension bed mounting |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front inner wheel arch in two places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear most next to the leaf spring hanger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offsde rear most next to the leaf spring hanger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear outer sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg top and outer side |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill / arch / step |5.2.6| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt split and leaking |2.4.G.2| | 1 |
| Nearside Rear Leaf spring fractured broken, shackle |2.4.B.1a| | 1 |
| Offside Rear Leaf spring fractured broken, shackle |2.4.B.1a| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded sill, behind bumper end cap |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill, shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger, shackle mount |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is inadequately repaired inner sill, shackle mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg top |2.4.A.3| | 1 |
| Nearside Front Front suspension retaining device missing lower arm ball joint |2.5.A.4| | 1 |
| Nearside Front Front suspension locking device missing Hub nut split pin |2.5.A.4| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill / step |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near the rear leaf spring chauked |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill chaulked *2 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer whell arch bottom chaulked |6.1.1 |c| |i|| | 1 |
| Other passenger door cannot be opened from outside the vehicle side door & rear door |6.2.3 |a|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner of sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section inside wheel arch |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door sill |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and osf under arch |6.1.1 |c| |i|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 7.1 limit 3 |7.4.B.3b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step in multiple places |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember at handbrake support bracket |6.1.B.2| | 1 |
| Nearside Body component damaged and likely to cause injury door mirror unit (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/sill back/chassis-outrigger/quarter panel sill back |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis-outrigger/quarter panel sill back |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake inadequately mounted hub bolt missing (1.1.21 (c)) | 1 |
| Offside Front Electrical wiring insecure + battery terminal |1.9.2a| | 1 |
| Offside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Rear position lamp|s| does not face the rear |1.1.A.3a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded corner chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded corner chassis |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis x member |2.4.A.3| | 1 |
| Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Front Sub-frame fractured |2.4.G.1| | 1 |
| Centre Front Sub-frame inappropriately repaired |2.4.A.2| | 1 |
| Nearside Rear Brake valve inadequately mounted linkage missing (1.1.7 (c)) | 1 |
| Nearside Front Suspension arm severely distorted w/bone |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Offside Rear Body component damaged and likely to cause injury lense (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured forward spring eye broken (5.3.1 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill at rear |2.4.A.3| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill inner and outer (6.2.2 (d) (i)) | 1 |
| Central Lower Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure Rotten underneath |3.1.4b| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spare wheel crossmember |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced wet in side |1.7.5a| | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached bush bolt |5.3.3 |a| |i|| | 1 |
| Nearside Body component insecure side (6.2.1 (a) (i)) | 1 |
| Rear Body component corroded and likely to cause injury tipper body (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step and sill (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded marked yellow |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded yellow |2.4.A.3| | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced door step |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wing under bonnet @ strut. (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch @ wheel. (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wing @ wheel arch. (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step. (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Step. (6.1.1 (c) (i)) | 1 |
| Power steering pipe/hose leaking at rack (2.1.5 (a)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal rack |2.3.3b| | 1 |
| Nearside Rear Body has a projection caused by corrosion body |6.1.C.1| | 1 |
| Power steering component|s| leaking rack or pipe fittings |2.3.3b| | 1 |
| Body panel corroded and likely to cause injury side and rear dropsides (6.2.1 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting area |6.1.B.2| | 1 |
| Direction indicator incorrect colour BOTH REAR |1.4.A.2f| | 1 |
| Offside Body has a sharp edge caused by corrosion side marker pole |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill step as marked |5.2.6| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch x2 (6.2.2 (d) (i)) | 1 |
| Nearside Outline marker lamp not working ALL (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Leaf spring shackle bracket bolt missing |2.4.B.6c| | 1 |
| Nearside Suspension arm pin or bush excessively worn Rear bush |5.3.4 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded strut mount |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill - seat belt mounting point |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis in front of subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind front subframe mount. (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under front wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front edge of spring turret (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced behind cab (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced behind cab (6.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp not working one out, does not match nearside(LED one side) (4.2.1 (a) (ii)) | 1 |
| Oil leaking excessively from engine Filter? (8.4.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail in front of the front subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Between the subframe mounts (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay marked (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured front (5.3.1 (b) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced X2 |6.1.1 |c| |i|| | 1 |
| Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering both inside front arches |6.1.A.1| | 1 |
| Body has a projection caused by damage front bumper insecure |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill corroded and holed |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step
|5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis leg at tank |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded load sensor mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded to rear inner sill |2.4.A.3| | 1 |
| Nearside Front Body component corroded and likely to cause injury step holed. |6.2.1 |a| |i|| | 1 |
| Offside Front Body component corroded and likely to cause injury step holed. |6.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill panels. |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel ,also inner to outer sill panels coming away from each other. |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger near spring mount ,body filler and chicken wire exposed. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch. |5.3.6 |a| |i|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment excessive travel. |1.1.6 |c|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step corroded |6.1.B.2| | 1 |
| Rear Brake valve leaking compensator leaking |3.6.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering At engine mount |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor at seat mount |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Rear crossmember |2.4.A.3| | 1 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Shock absorber insecure Incorrectly fitted catching chassis |2.7.2b| | 1 |
| Offside Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis /outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Fuel tank insecure strap heavily corroded and holed |6.1.3 |a| |i|| | 1 |
| Offside Rear Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring mount |6.1.B.2| | 1 |
| Power steering component|s| leaking under vehicle |2.3.3b| | 1 |
| Nearside Body has a sharp edge caused by corrosion OUTER SILL |6.1.C.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER WING |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BY SPRING MOUNTING |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / wheel arch |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount on chassis |2.4.A.3| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush inner rear |2.5.A.1c| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing corroded/holed below headlamp (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing corroded/holed underneath air box (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg corroded/holed near bulkhead (6.1.1 (c) (i)) | 1 |
| Electrical wiring damaged and bare wires exposed horn |1.9.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front |2.4.A.3| | 1 |
| Nearside Front Brake pipe inadequately supported chassis corroded |3.6.B.1| | 1 |
| Offside Front Brake pipe inadequately supported chassis corroded |3.6.B.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Offside Front Suspension component insecurely attached ball joint not pressed into hub correctly/retaining clip not fitted correctly (5.3.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired by shackle mount - repair patches not fully welded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired by spring anchor mount - repair patches not fully welded |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn loose (5.3.4 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill (6.1.1 (d) (i)) | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill/step area (6.1.1 (d) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill not spot welded (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired panel to rear panel not welded (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner wheel arches near strut mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Nearside Outer Rear Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cab floor (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded NEARSIDE AND OFFSIDE STEPS |5.2.6| | 1 |
| Nearside Ball joint ball pin shank loose |2.2.B.1c| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint LINK ARM |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint LINK ARM |2.4.G.2| | 1 |
| Rear Position lamp not working s |4.2.1 |a|| | 1 |
| Rear Direction indicator not working s |4.4.1 |a| |ii|| | 1 |
| Nearside Front Driver`s view to front impaired by damage |6.9.1b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of o/s sill |6.1.B.2| | 1 |
| Rear Prop shaft securing bolt missing center shaft bolt. |6.1.7 |a| |i|| | 1 |
| Offside Rear Rear reflector insecure marker light |1.5.1a| | 1 |
| Offside Front Upper Steering box insecure power steering reservoir |2.2.B.1a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion headlight lens |6.1.C.1| | 1 |
| Drivers seat moving inadvertently Securing bolts loose (6.2.5 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf Spring Mount Shackle End |5.3.6 |a| |i|| | 1 |
| Nearside Inner Ball joint has excessive play track rod |2.2.B.1f| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor / innersill |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering innersill |6.1.1 |c| |ii|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s an o/s outersill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsf doorstep |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osf doorstep |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns outer sill |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns inner sill |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os outer sill |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr drop sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr chassis box section |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osr chassis box section |6.1.B.2| | 1 |
| Offside Front Steering arm has relative movement at its fixings osf steering rack arm |2.2.B.1h| | 1 |
| Nearside Lower Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 1 |
| Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill to out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded drop sill to out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre out rigger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre under sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear main chassis |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded under arch to step |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre outer sill |2.4.A.3| | 1 |
| Offside Front Leaf spring fractured eye (5.3.1 (b) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner quarter panal holed and rusted |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner quarter panal holed and rusted |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded drop sill holed and rusted |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step corroded within 30cm of seat fixing (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step seat |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step seat |5.2.6| | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis rail near to load sensing valve (6.1.1 (a) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both side inner sills within prescribed area |6.1.1 |c| |i|| | 1 |
| Nearside Front Anti-lock braking system component excessively damaged abs ring |3.4.2| | 1 |
| Front Outline marker lamp not working both sides |4.2.1 |a|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill and top of sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing x2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated chassis (6.2.4 (a) (i)) | 1 |
| Offside Rear Floor excessively deteriorated chassis (6.2.4 (a) (i)) | 1 |
| Nearside Front Inner Floor excessively deteriorated sill (6.2.4 (a) (i)) | 1 |
| Offside Rear Outer Floor excessively deteriorated sill (6.2.4 (a) (i)) | 1 |
| Offside Rear Inner Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Rear Outer Floor excessively deteriorated rear (6.2.4 (a) (i)) | 1 |
| Nearside Rear Outline marker lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
| Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step to inner and outer sill |6.1.B.2| | 1 |
| Centre Front Electrical wiring inadequately supported in cab wire loose |1.9.2a| | 1 |
| Centre Front Battery insecure under seat |1.9.1| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle side door handle |6.2.B.1c| | 1 |
| Offside Rear Leaf spring eye defective |anchor| front leaf spring eye broken |2.4.B.1b| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp When stop light operated (4.2.3 (c)) | 1 |
| Nearside Front Inner Statutory seat belt missing Stalk mising |5.1.1| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill three places (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded step sill |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front hanger sill area inner and outer |2.4.A.3| | 1 |
| Fuel tank insecure front strap corroded away |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Windscreen wiper blade missing both |8.2.2| | 1 |
| Windscreen washer control missing switch broken |8.2.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis...upper shocker mounting |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded front mounting |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded door step/inner sill |5.2.6| | 1 |
| Emissions not tested coolant leak |7.3.A.1| | 1 |
| Nearside passenger door does not latch securely closed sliding door |6.2.B.1a| | 1 |
| Front position lamp|s| missing |1.1.A.3a| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp front sidelights illuminate when footbrake is applied |1.1.A.3f| | 1 |
| Offside Rear Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Front Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Offside Front Axle with loose fixing bolts hub (5.1.1 (b) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded within 30cm of lower seat belt mount fixing (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Floor corroded within 30cm of seat belt fixing (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded within 30cm of lower seat belt fixing (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded within 30cm of lower seat belt fixing (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded within 30cm of lower seat belt fixing (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger |2.4.A.3| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Offside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Side repeater obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Front Service brake lagging in operation slow to disengage (1.2.1 (d)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded under seat marked yellow |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing marked yellow |6.1.B.2| | 1 |
| Offside Rear Leaf spring eye defective |anchor| Front and rear spring eyes broken |2.4.B.1b| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded X2 Chalked |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Chalked |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Chalked |5.2.6| | 1 |
| Offside Front Lower Suspension arm insecure rear |2.4.G.1| | 1 |
| Offside Body has a sharp edge caused by damage morror |6.1.C.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting outrigger |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch floor |6.1.B.2| | 1 |
| Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings holes in chassi at rear of spring hangers |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holes in chassi at front of spring hangers |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2| | 1 |
| Brake pipe inadequately clipped main |3.6.B.1| | 1 |
| Offside Suspension spring mounting prescribed area is inadequately repaired inner & outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired inner wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mount |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired step |7.1.1 |a| |i|| | 1 |
| Nearside Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Centre Front Lower Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Statutory seat belt missing middle seat belt buckle |5.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured leaf spring bump stops |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured leaf spring bump stops |2.4.A.3| | 1 |
| Rear Leaf spring has a deteriorated shackle rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Brake cable has restricted free movement hand |3.5.1k| | 1 |
| Centre Towbar component insecure |6.6.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind bumper area by out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind bumper area by out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan end of wheel arch area by out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill more than 1 place |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel behind bumper |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill end of sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member more than 1 place |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member more than 1 place |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch foremost and rear most |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel behind bumper area more than 1 place |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen bulb incorrectly fitted |4.1.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door stop |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill behind bumper |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill behind bumper |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out sill |5.3.6 |a| |i|| | 1 |
| Emissions not tested excessive black smoke (8.2.2.2 (e)) | 1 |
| Exhaust has a major leak of exhaust gases snapped (6.1.2 (a)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by tank (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wing above subframe (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength floor above axel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected valance/floor |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch x 2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Front Fuel tank insecure support strap missing |6.1.3 |a| |i|| | 1 |
| Prop shaft bearing excessively worn centre rear |6.1.7 |b| |i|| | 1 |
| Brake cable damaged fouling n/s/r inner wheel rim |1.1.15 |a|| | 1 |
| Centre Vehicle structure has excessive corrosion which adversely affects braking or steering hand brake bracket |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi above cross member |5.3.6 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Body has a sharp edge caused by corrosion REAR BACK PANNEL |6.1.C.1| | 1 |
| Front wheel bearing rough when rotated AND X PLAY |2.5.A.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded UNDER BONNET UPPER CHASSI LEG CORRODED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded NEAR SIDE FRONT INNER AND OUTER SILLS CORRODED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded CENTRE ABOVE HANDBRAKE BRACKET CORRODED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded OFF SIDE FRONT AROUND TOP OF SUSPENTION LEG CORRODED |2.4.A.3| | 1 |
| Nearside Front Body panel corroded and likely to cause injury outer wing |6.2.1 |a| |i|| | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted and insecure |6.1.4 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured front eye upper inside chassis cracked |5.3.1 |b| |i|| | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis near front front mounting corroded please weld plate all the way under mounting dont just weld hole up |5.3.6 |a| |i|| | 1 |
| Front Front suspension has excessive play in a lower suspension ball joint Both front |2.5.B.1a| | 1 |
| Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Both sides of chassis by back wheel |6.1.B.2| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced in wheel well (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step inner and outer (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced by sliding door/step (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt also has slight play in ball joint |5.3.4 |b| |ii|| | 1 |
| Nearside Front Suspension arm ball joint excessively worn also ball joint dust cover severely deteriorated |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger corroded through |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded through |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded through |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, corroded through |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded through |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis leg |5.2.6| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded step backplate |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured around front ancher bush |2.4.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer floor |2.4.A.3| | 1 |
| Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner arch is corroded in two places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt ball joint dust cover is split (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system leaking from brake bias valve area |1.1.11 |b| |ii|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area, effecting strength of step |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill area, effecting strength of step |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area, effecting strength of step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill below b post |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill below b post |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch area |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch area |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch a post area (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill below b post (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill below b post (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured chassis load valve area |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis , shock absorber mounting area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis |top| |2.4.A.3| | 1 |
| Offside Front Lower Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Rear passenger door hinge insecure |6.2.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both sides within 12" spring hangers |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner and outer |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected 2x rear shackles (5.3.6 (a) (ii)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside and offside rear leaf spring mounts and round, all marked in yellow (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings as marked. |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked. |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill and lower wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill and lower wheel arch |2.4.A.3| | 1 |
| Speedometer clearly inoperative effected by engine rpm |6.7.2| | 1 |
| Nearside Front Body panel corroded and likely to cause injury WING |6.2.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion WING |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded SILL TO WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Offside Suspension has inadequate clearance with the bump stop missing |2.4.A.1a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under seat |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under seat |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to leaf spring rear mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to leaf spring rear mount |6.1.B.2| | 1 |
| Nearside Rear Brake pipe inadequately supported flexi hose to brake pipe |3.6.B.1| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded chassis rail in engine bay |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded chassis rail by alternator |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded out rigger by spring eye |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded body/under step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis frame |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded body/inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body/inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body/rear mount |2.4.A.3| | 1 |
| Rear Stop lamp|s| not working both |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Inner Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded impect bar between two leaf spring mountings |2.4.A.3| | 1 |
| Nearside Front Body insecure and dangerous to other road users bumper |wing corroded| |6.1.B.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch marked (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (along sill) marked (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (along sill) marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength beside rear of leafspring mounting (rear mounting) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear of leaf-spring mounting area (5.3.6 (a) (ii)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Section of Sill |Marked| |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Section of Sill |Marked| |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked |Near Leaf spring mounting point| |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked |Near Leaf spring mounting point| |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner whel arch |Marked| |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper inner flitch at nc strut top |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper inner flitch at mc strut top |6.1.B.2| | 1 |
| Nearside Rear rear brake recording little or no effort park brake |3.7.B.5a| | 1 |
| Centre Front Lower Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Centre Front Body has a sharp edge caused by damage door mirror |6.1.C.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front leaf spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner box section |6.1.B.2| | 1 |
| Offside Inner Front Upper Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Front Inner Track rod end ball joint has excessive play Both |2.1.3 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Fuel pipe leaking |7.2.3| | 1 |
| Rear Inner Suspension spring mounting prescribed area is excessively corroded Both sills |2.4.A.3| | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded Both wheel arches |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Close to strut mounting & brake components |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and rear wheel arch areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and rear wheel arch areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/wheel arch |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing / chassis leg |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill. |rear spring hanger| |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill / chassis. |rear spring hanger| |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step. underside |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch / chassis |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill x3 |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill holed and corroded inner sill x3 |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill corded x2 |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings slam panel holed and corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch corroded |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and back holed and corroded |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Excessive corrosion N/S/F inner wing |6.1.B.2| | 1 |
| Brake load sensing valve defective and function impaired Siezed |3.6.E.3| | 1 |
| Offside Side repeater not working indicator |1.4.A.2c| | 1 |
| Anti-roll bar attachment bracket/mounting insecure Offside and nearside rear fixings loose |2.4.G.1| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush inner wishbone bush |2.5.A.1c| | 1 |
| Nearside Front Front wheel bearing has excessive play and rough when rotated |2.5.A.3c| | 1 |
| Anti-roll bar which is adjustable, locking device insecure rear anti-roll bar end attachments loose |2.4.G.1| | 1 |
| Offside Driver`s seat with a defective structure |6.2.5 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill closing panel |5.3.6 |a| |i|| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a joint chalked |2.3.3b| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill 2 places |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis cracked |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded all of rear box section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis cracked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis cracked |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour lense smashed |1.4.A.2f| | 1 |
| Centre Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings 3 cross members badly corroded holed and weak |6.1.B.2| | 1 |
| Suspension arm has excessive play in a ball joint both bottom ball joints |2.4.G.2| | 1 |
| Nearside Front Inner Braking system leaking |3.6.A.1| | 1 |
| Nearside Front Inner Brake pipe leaking |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep and inner sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor by rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor and chassis by rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill by front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shock mounting |2.4.A.3| | 1 |
| Power steering pump drive system defective Belt tensioner falling off |2.3.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring hanger |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar inappropriately repaired |2.4.A.2| | 1 |
| Offside Rear Anti-roll bar inappropriately repaired |2.4.A.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc inner |2.4.G.4e| | 1 |
| Nearside Front Inner Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door sill panel to supporting panels |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded slideing door sill panel to supporting panels |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill panel to supporting panels |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch &floor to supporting panels |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back panel to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor &support panels |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch &floor to support panels |2.4.A.3| | 1 |
| Nearside Rear brake drum contaminated by brake fluid or oil? |3.5.1h| | 1 |
| Central Exhaust system not adequately supported x4 exhaust rubbers broken |7.1.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Inner wheel arch |6.1.A.1| | 1 |
| Offside Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills (6.1.1 (c) (i)) | 1 |
| Prop shaft securing bolt missing center bolt in front support bearing (6.1.7 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside and nearside rear (6.1.1 (c) (i)) | 1 |
| Entrance/exit door ???door open` warning device inoperative Rear door |6.2.C.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to body above subframe (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail in engine bay (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering behind rear wheel |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering behind rear wheel |6.1.A.1| | 1 |
| Offside front brake binding see other brake faults |3.7.B.1| | 1 |
| Seat belt insecurely fixed to the vehicles structure near side rear last row of seats fixing bolts loose |5.2.1a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded off side rear inner sill back plate next |opposite spring mount | |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded off side front inner sill back plate close to step area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded off side rear inner rear 1/4 |close to spring mount in front and rear of support| |5.2.6| | 1 |
| Driving control|s| defective due to rubbish likely to interfere with the proper control of the vehicle. excessive loose rubbish in rear |6.8.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired welded plates only secured to inner skin (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all rear section of van leaf spring mountings corroded to excess filled with expanding foam (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting prescribed area corroded and filled with silicone sealant and expanding foam (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross/member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger x3 |2.4.A.3| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn arm inner rear bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Body panel damaged and likely to cause injury screws sticking out |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush complete has movement within arm , where there should be none as bush is pressed in . |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor corroded and holed by shock absorber |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie leg outeriger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/step |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member and body cross members offside and nearside |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body to chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie members |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassie members |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering flitch |6.1.1 |c| |ii|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch by leg top |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to step |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel well |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel well |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded cab sill/step and rear of inner cab |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing areas |2.4.A.3| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step sill (6.1.1 (c) (i)) | 1 |
| Brake pipe leaking load sensing valve to flexi pipe |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door shut |5.2.6| | 1 |
| Headlamp light source and lamp not compatible both (4.1.4 (c)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced out rigor (6.1.1 (a) (i)) | 1 |
| Service brake excessively binding BOTH REAR (1.2.1 (f)) | 1 |
| Service brake excessively fluctuating BOTH REAR (1.2.1 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING AT ROADWHEEL (5.3.6 (a) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury FRONT WING (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body component insecure MUD GUARD (6.2.1 (a) (i)) | 1 |
| Brake pipe inadequately clipped brake pipe running across engine not clipped |3.6.B.1| | 1 |
| Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
| Nearside Rear position lamp|s| insecure lens insecure |1.1.A.3a| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour lens smashed and showing white light |1.1.A.3e| | 1 |
| Central Brake pipe inadequately clipped front to back |3.6.B.1| | 1 |
| Brake load sensing valve seized pivot arm seized |3.6.E.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner quarter of body (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/body (5.3.6 (a) (i)) | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer + inner sill |2.4.A.3| | 1 |
| rear brake recording little or no effort both sides service brake 40% |3.7.B.5a| | 1 |
| Offside Front Suspension arm pin or bush excessively worn front arm / rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion inner sill
|6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion inner sill |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings backe box |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill section |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg to inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to out rigger |2.4.A.3| | 1 |
| Nearside Front Headlamp light intensity severely reduced bulb not fitted correctly |4.1.4 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced just below gearbox mountain |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill in few places |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger forward of rear axle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength plates coming of rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength plates coming of rear cross member |5.3.6 |a| |i|| | 1 |
| Nearside Front Fuel cap/sealing device missing could not remove for inspection (6.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by inner sill (6.1.1 (c) (i)) | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting rear floor / chassis (6.1.6 (i) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step and inner sill in several places |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step and inner sill in several places |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quarter sill to out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/wing |2.4.A.3| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear bumper |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill, passenger step and floor around seat mounting area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chasssis area around both front ant rear leaf spring mounting points corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chasssis area around both front ant rear leaf spring mounting points corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor area corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to floor area corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger near shock absorber top mount excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg underside holed and corroded |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill corroded |centre| |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside chassis near brake load valve holed and corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg corroded/fractured at engine mounting point |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring eye anchor |2.4.A.3| | 1 |
| Nearside Outer Rear Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Front suspension has excessive movement at a wishbone pin or bush back bush |2.5.A.1c| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Centre step |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Arch |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Valance |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Valance |2.4.A.3| | 1 |
| Nearside Front Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under rear arch front |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under rear arch rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg underarch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under arch chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under qtr |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear pannel |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step/sill area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill to rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/inner wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch / floor area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill to floor area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner step to inner sill under body |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassey & inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Track rod end inappropriately modified |2.2.C.1e| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside floor area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded underside floor area |2.4.A.3| | 1 |
| Nearside Body has a projection caused by corrosion sill x2 |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases centre and rear |7.1.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front and rear sill |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassi |6.6.6| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement wish -bone bush |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle |6.1.B.2| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings middle and rear |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle chassis (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis and cab meet (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center of chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired subframe mount (expanding foam/sealant) (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired inner sill and outer sill [front and rear] |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired inner and outer sills [front to rear] |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underside of n/s step |5.2.6| | 1 |
| Towbar retaining device missing tow ball pin retainer clip missing |6.6.3a| | 1 |
| Nearside Rear Upper Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired corroded to rear of cab (6.2.2 (d) (ii)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill corroded (6.2.2 (d) (ii)) | 1 |
| Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases pipe (6.1.2 (a)) | 1 |
| Rear Floor excessively deteriorated load floor (6.2.4 (a) (i)) | 1 |
| Rear Dropside corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Headlamp switch faulty Main beam / indicator stalk |1.7.1| | 1 |
| Direction indicator adversely affected by the operation of another lamp Both rear lamps |1.4.A.2h| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor corroded within 30cm of seat mounting |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill corroded within 30cm of seat mounting |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis corroded within 30cm of rear mounting |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings cross meber |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded cab area under battery |5.2.6| | 1 |
| Brake pipe leaking n/s front to rear |3.6.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner step |6.1.A.1| | 1 |
| Nearside Front Outer Vehicle structure has damage which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Brake pipe inadequately clipped Both main front to rear |3.6.B.1| | 1 |
| Brake pipe inadequately supported Main front to rear |3.6.B.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Whole inner wing |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Whole inner wing |2.4.A.3| | 1 |
| Offside Front Brake hose twisted |found during steering lock to lock check| Also insecure |2.2.D.2b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded most forward inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded most rear inner sill |2.4.A.3| | 1 |
| Nearside Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed |6.2.2 |d| |ii|| | 1 |
| Nearside Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed in 2 places |6.2.2 |d| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at front subframe mountng area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded within 30 cm of load sensor (1.1.21 (e) (i)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users Coolant |8.4.1 |a| |i|| | 1 |
| Nearside Front Wheel bearing rough when rotated And has slight play. |5.1.3 |b| |i|| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp interaction |1.3.2f| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp inter action with indicator |1.1.A.3f| | 1 |
| Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings part of chassis leg |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings part of chassis leg |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel holed |6.1.B.2| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt perished & split |2.4.G.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbone rear bush split & perished |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL. |2.4.A.3| | 1 |
| Integral body structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Nearside Inner Ball joint has excessive play rack joint |2.2.B.1f| | 1 |
| Nearside Rear Electrical wiring deteriorated and bare connector exposed |1.9.2c| | 1 |
| Brake lever has restricted free movement (1.1.15 (e)) | 1 |
| Outline marker lamp not working Both sides front upper (4.2.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill/step |5.2.6| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength lower panel (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/b piller (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by fuel tank (5.3.6 (a) (i)) | 1 |
| Rear Leaf spring shackle bracket corroded and seriously weakened upper both sides (5.3.1 (b) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides outriggers rotten around spring hangers (5.3.6 (a) (i)) | 1 |
| Towbar attachment defective 4 securing bolts missing (6.1.6 (c) (i)) | 1 |
| Front Suspension arm has excessive play in a pin/bush Both |2.4.G.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Both |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded drivers step |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both rear floors |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above front subframe rear mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor area .... rear subframe prescribed area |5.3.6 |a| |i|| | 1 |
| Exhaust system insecure 4 exhaust mountings deteriorated |6.1.2 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded face plate |2.4.A.3| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet around sudframe mounting bolt |6.1.B.2| | 1 |
| Nearside Headlamp aim beam image obviously incorrect fault on bulb fitting |1.8.A.1b| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded repair come unwelded and hole around mounting bolt on chassis under bonnet |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis front and rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis front and rear leaf spring mountings |2.4.A.3| | 1 |
| Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor |6.1.B.2| | 1 |
| Rear Exhaust system not adequately supported exhaust pipe rubber mounting |7.1.1| | 1 |
| Offside Front Suspension arm pin or bush excessively worn front |5.3.4 |a| |i|| | 1 |
| Anti-roll bar pin or bush excessively worn rear |5.3.4 |a| |i|| | 1 |
| Offside Front Radius arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded flitch under rear wing |2.4.A.3| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded corroded30cm from seat belt mounting |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded corroded 30cm from seat belt mounting |5.2.6| | 1 |
| Offside Front Outer Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Upper An item not tested |Manual| | 1 |
| Offside Front Track rod end ball joint has excessive play rack end |2.1.3 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor door step area |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill behind wheel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and body mount behind wheel |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush loose |2.4.G.2| | 1 |
| Anti-roll bar rubber mounting deteriorated resulting in excessive movement both o/s/f and n/s/f inner D bushes worn |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting back panel and chassis leg holed |6.6.6| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |anchor| front bush . |2.4.B.4| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by steering rack column (6.1.1 (c) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated both (6.1.7 (d) (i)) | 1 |
| Nearside Rear Leaf spring to axle fixing bolt missing (5.3.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top area (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt N/S/F lower ball joint dust cover split (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt N/S/F lower ball joint gaiter split (5.3.4 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Exhaust has major leak centre box |7.1.2| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired load sensing valve insecure (1.1.17 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced plate on chassis insuficent weld (6.1.1 (c) (i)) | 1 |
| Central Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected chassis cross section hand brake mounting |1.1.21 |e| |ii|| | 1 |
| Rear Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected cross section hydrolic pipe mounting and stuctural strenght affected |1.1.21 |e| |ii|| | 1 |
| Nearside Outer Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced chassis behind cab plate not welded |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mud guard insecure |6.1.1 |c| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury tipper body corroded sharp edges |6.2.1 |a| |i|| | 1 |
| Central Brake pipe at imminent risk of failure or fracture brake pipe seriously corroded |1.1.11 |a|| | 1 |
| Offside Body has a sharp edge caused by corrosion outer sill 2 places |6.1.C.1| | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced has water inside ther lens |1.7.5a| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasis leg |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Anti-roll bar linkage cracked |2.4.G.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded front arch x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger x2 |2.4.A.3| | 1 |
| Parking brake inoperative on one side both (1.4.1 (a)) | 1 |
| Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front sils (6.2.2 (d) (i)) | 1 |
| Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chasis both sides (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both inner sils (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both outer sils (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sils (6.2.2 (d) (i)) | 1 |
| Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides chassis (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sil (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sil (6.2.2 (d) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides after wheels |6.1.B.2| | 1 |
| Nearside Front Upper Macpherson strut corroded and seriously weakened inner wing |5.3.3 |b| |i|| | 1 |
| Offside Front Upper Macpherson strut corroded and seriously weakened inner wing |5.3.3 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mounts on chassis annd outriggers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear shackle mount chassis and outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor mount |2.4.A.3| | 1 |
| Fuel system component leaking injector pipes |7.2.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by compensator valve
|6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing
|2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded by seat mount
|5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Bump stop (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner step |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front out rigger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded back panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer and inner sills |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills and step |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded above spring |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded above spring |2.4.A.3| | 1 |
| Offside Axle swivel joint has excessive play in a ball joint |2.5.A.3b| | 1 |
| Nearside Rear Bonded suspension unit deteriorated and cannot function as intended bump stop missing |2.4.F.3| | 1 |
| Rear Body has a sharp edge caused by corrosion exhaust box |6.1.C.1| | 1 |
| Offside Rear Bonded suspension unit damaged and cannot function as intended bumpstop missing |2.4.F.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings forward spring hanger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember holed |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded fletch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis above leaf sping |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis above rear of leaf spring |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering of rear cross member x2 |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 1 |
| Front Fuel system component leaking end of pump (6.1.3 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount area (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger area (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength seal (5.3.6 (a) (i)) | 1 |
| Rear Brake load sensing valve defective and function impaired seized |3.6.E.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine no oil in engine |7.4.B.3b| | 1 |
| Exhaust system not adequately supported rubber mount missing |7.1.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside step |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside chasis |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper and lower |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper and lower |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step area |5.2.6| | 1 |
| Nearside Rear Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear Rear fog lamp not working bulb & connection (4.5.1 (a) (ii)) | 1 |
| Oil leaking excessively from transmission from gearbox |8.4.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner door step rotted and holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake drum contaminated axle severe oil leak |1.1.14 |b|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both side linkages and D bushes |5.3.4 |a| |i|| | 1 |
| Nearside Vehicle structure is deformed and structural rigidity is significantly reduced chassis just behind door step |6.1.1 |a| |i|| | 1 |
| Offside Vehicle structure is deformed and structural rigidity is significantly reduced chassis just behind door step |6.1.1 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both strut mountings |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion wings and sills |6.1.C.1| | 1 |
| Front Subframe mounting prescribed area is excessively corroded both chassis rails |2.4.A.3| | 1 |
| Nearside Front Braking system leaking on bulk head |3.6.A.1| | 1 |
| Centre Drive shaft uj which forms part of the suspension has an incorrectly seated universal joint flange |2.4.G.4c| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front/and/rear/backing/sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front/and/rear/backing/sills |6.1.B.2| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill has various holes / corrosion (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed / corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg badly holed / corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills corroded (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills and step assem corroded (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills and step corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Body mounting fixings insecure filled with filler and corroded (6.2.2 (c) (i)) | 1 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Both sides |2.4.G.2| | 1 |
| Fuel system component leaking Fuel pump area |7.2.3| | 1 |
| Fuel system component leaking Desiel around injectors |7.2.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength User sill |5.3.6 |a| |i|| | 1 |
| Fuel system component leaking Fuel leaking onto top of Engine. |7.2.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner -outer sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded foremost |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded foremost |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor/arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor/arch |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded centre floor to sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner flitch/arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded floor box section |2.4.A.3| | 1 |
| Nearside Rear Inner rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear Inner rear brake recording little or no effort |3.7.B.5a| | 1 |
| Centre Front Inner Fuel system component leaking |7.2.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear spring mounts under back doors |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering leg |6.1.A.1| | 1 |
| Nearside Front Lower Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front rear suspension mounting. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front rear suspension mounting. |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Front rear suspension mounting. |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear suspension mounting. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Rear suspension mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded corrosion to sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both outriggers and o/s closing panel |2.4.A.3| | 1 |
| Power steering component|s| leaking area of pump/pipes |2.3.3b| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in area of engine mtgs |6.1.1 |c| |i|| | 1 |
| Rear Brake rod has restricted free movement |3.5.1k| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded Wheel tub/flitch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill on chassis (5.3.6 (a) (i)) | 1 |
| Fuel pipe union leaking Injector |6.1.3 |b| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded LSV mount |1.1.21 |e| |i|| | 1 |
| Fuel tank insecure 1 strap broken, other cracked half way |6.1.3 |a| |i|| | 1 |
| Offside Rear Inner Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Rear Inner Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle sideloading door |6.2.B.1c| | 1 |
| Offside Side repeater adversely affected by the operation of another lamp not working with position lamps on |1.4.A.2h| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement roll bar d mount bushes x2 |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r chassis by shock mount |2.4.A.3| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed|footstep| |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed |footstep| |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed |footstep| |6.1.A.1| | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror surround (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury mirror surround (6.2.1 (a) (i)) | 1 |
| Nearside Rear Position lamp missing red lens missing from lamp unit /inoperative (4.2.1 (a) (ii)) | 1 |
| Offside Body has a projection caused by corrosion foot step |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing & bumper insecure |6.1.C.1| | 1 |
| Offside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leak spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear. |2.4.A.3| | 1 |
| Offside Front Lower Sub-frame locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by spring swinging shackle |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step under side |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step under side |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf front eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf front eye |5.3.6 |a| |i|| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded Chassis leg |2.2.C.1h| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded Chassis leg |2.2.C.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Centre flich plate |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger/inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger/inner sill |2.4.A.3| | 1 |
| Offside Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
| Nearside Front Leaf spring anchor bracket damaged and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Rear Lower Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Leaf spring shackle bracket insecure bolt loose (5.3.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/strut tower (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/strut tower (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab /floor corroded (7.1.1 (a) (i)) | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected cross member at cables (1.1.21 (e) (ii)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected bulkhead cross ember at cab (1.1.21 (e) (ii)) | 1 |
| Anti-roll bar attachment bracket/mounting corroded and seriously weakened cross member at anti roll mount (5.3.3 (b) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle crossmember |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner sill |6.1.1 |a| |i|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |play| |2.2.C.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount rear (5.3.6 (a) (i)) | 1 |
| Steering box leaking to the extent that oil is dripping (2.1.1 (e) (ii)) | 1 |
| Nearside Rear Other passenger door pillar missing (6.2.3 (c) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3| | 1 |
| Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Cab step corroded and holed. |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2 x x-members |2.4.A.3| | 1 |
| Offside Headlamp aim not in a clean condition affecting light output |1.2.4a| | 1 |
| Offside Stop lamp not working came on when tapped. |1.2.1b| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to floor x2 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill to floor (5.3.6 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis next to the fuel tank |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to shocker mounting |6.2.2 |d| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer siil |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring |6.1.B.2| | 1 |
| Offside Rear Body has a projection caused by corrosion outer sill |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill where door step attachs |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill where door step attaches |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to back |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep to sill |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear mtg |2.4.G.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D Bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Leaf spring anchor pin or bush likely to become detached Front |5.3.4 |a| |ii|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced lower sills to floors (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced lower sills to floors (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step lower (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D BUSHES (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D BUSHES (5.3.4 (a) (i)) | 1 |
| Nearside Front Coil spring insecure (5.3.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring . |2.4.A.3| | 1 |
| Sub-frame damaged and seriously weakened front subframe, nearside rear corner bent up and hitting wishbone |2.4.G.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front wheel arch. near engine mount |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside flat bed main support rail, at rear, 5 holes |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside flat bed main support rail, at rear, 2 holes |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch area, |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH/FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH/FLOOR |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS OUTRIGGER x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CROSS MEMBER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded UNDERBODY SILL/BEHIND WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded UNDERBODY/DOOR STEP |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Rear Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet near servo |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer chassis behind wheels |6.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis behind wheels |6.1.1 |c| |i|| | 1 |
| Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement FRONT |2.4.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR CHASSIS LEGS CORRODED ADJ TO BUMP STOPS |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR SPRING MOUNT AREA CORRODED |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top mount area |2.4.A.3| | 1 |
| Electrical wiring inadequately supported Under bonnet Fuse box |1.9.2a| | 1 |
| Nearside Front Lower Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel-arch |6.1.C.1| | 1 |
| Emissions not tested due to excess black smoke |7.3.A.1| | 1 |
| Offside Front Upper Front position lamp|s| not working cab light |1.1.A.3b| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded near steering rack |2.3.2| | 1 |
| Nearside Front Upper Front position lamp|s| not working cab light |1.1.A.3b| | 1 |
| Emissions not tested due to excess black smoke at fast idle |7.3.A.1| | 1 |
| Fuel tank insecure front strap snaped |7.2.1| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH REAR CHASSIS LEGS (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded REAR CROSS MEMBER |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger rear spring mounting |2.4.A.3| | 1 |
| Nearside All position lamps not in good working order |not working| |1.1.4a| | 1 |
| Front Headlamps matched pair are not the same colour (4.1.4 (d)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate limit 0.88 < Test result 1.97 (8.2.2.2 (a)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch VERY corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch VERY corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Arch , full of foam, filler, silicone , and fiberglass (6.1.1 (d) (i)) | 1 |
| Nearside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Inner Rear Body has a projection caused by damage |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring shackle |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill / door step |5.2.6| | 1 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected shows white to rear |4.5.1 |b| |ii|| | 1 |
| Prop shaft bearing excessively worn x2 |6.1.7 |b| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced x2 |7.1.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour due to damage |1.4.A.2f| | 1 |
| Nearside Rear Body has a sharp edge caused by damage indicator lense |6.1.C.1| | 1 |
| Nearside Rear Shock absorber has an excessively worn bush bush missing |2.7.4| | 1 |
| Steering column universal joint insecure pinch bolt loose at steering rack end |2.1.5| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch |6.2.2 |d| |i|| | 1 |
| Lower Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Prop shaft likely to become detached centre bearing bolt missing |6.1.7 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger areas |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top area |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step & floor |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step & floor |6.1.1 |c| |i|| | 1 |
| Fuel tank insecure front strap corroded |7.2.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step and outer sill |7.1.1 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced extensivley corroded through out (6.1.1 (c) (i)) | 1 |
| Nearside Front Body component likely to become detached mud flap (6.2.1 (a) (ii)) | 1 |
| Offside Rear Body component likely to become detached mud flap (6.2.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter |5.3.6 |a| |i|| | 1 |
| Fluid leak harmful to the environment or a risk to other road users power steering |8.4.1 |a| |i|| | 1 |
| Inner Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s and n/s inner sills |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner wheel arch |2.4.A.3| | 1 |
| Offside Front Driver`s airbag obviously defective |5.4.1| | 1 |
| Centre Rear Trailer electrical socket deteriorated so that lead cannot be securely connected |1.9.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near shock absorber mounting/ brake load valve |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near spring shackle mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near spring shackle mounting |2.4.A.3| | 1 |
| Power steering pipe/hose leaking ON RACK UNION (2.1.5 (a)) | 1 |
| Parking brake inoperative on one side BOTH SIDES NSR 95KG OSR 125KG (1.4.1 (a)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear d bushes |5.3.4 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 0.75 |8.2.2.2 |a|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis leg by load sensing valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded various |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded various |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded various |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded various |2.4.A.3| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside All outline marker lamps not working centre |4.2.1 |a|| | 1 |
| Nearside Rear All outline marker lamps not working centre |4.2.1 |a|| | 1 |
| Offside All outline marker lamps not working centre |4.2.1 |a|| | 1 |
| Offside Rear All outline marker lamps not working centre |4.2.1 |a|| | 1 |
| Offside Rear Lower Body component corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated out riggers |6.2.4 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated out rigger |6.2.4 |a| |i|| | 1 |
| Supplementary Restraint System warning lamp indicates a fault AIR BAG LAMP ON |5.4.2| | 1 |
| Front Front suspension has excessive play in a track control arm inner bush DROP ON TO FRAME BOTH FRONTS |2.5.B.2b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded FLOOR SEAT MOUNT |5.2.6| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings REAR OF CAB CENTER CROSS MEMBER |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| leaking to rack |2.3.3b| | 1 |
| Front Steering arm deformed both tie rods (2.1.3 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage has an unsafe modification lose |5.3.3 |c| |i|| | 1 |
| Offside Hydraulic brake calliper insecurely mounted bolt missing |1.1.16 |c| |i|| | 1 |
| Offside Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Offside Inner Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both sides (4.4.3 (b)) | 1 |
| Windscreen damaged and affecting the drivers view of an obligatory external mirror Windscreen damaged and affecting the drivers view (3.2 (a) (ii)) | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill outer & inner 6 areas |6.1.B.2| | 1 |
| Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis under towbar |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat support |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat support |5.2.6| | 1 |
| Nearside Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill area (6.2.2 (d) (i)) | 1 |
| Offside Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Fuel tank insecure both steel brackets corroded through |7.2.1| | 1 |
| Rear Body has a sharp edge caused by corrosion x 2 places |6.1.C.1| | 1 |
| Nearside Rear Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sills rear panle (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by shackle |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 holes (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis by crossmemder |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front sub-frame mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear sub-frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 1 |
| Body has a sharp edge caused by corrosion tipper bed |6.1.C.1| | 1 |
| Suspension component mounting prescribed area is fractured Both front inner wings |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both inner sills |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Leaf spring mounting |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail near step |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sliding door |6.2.2 |d| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sills |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf rear mount |2.4.A.3| | 1 |
| Exhaust system not adequately supported rear cat join clamp missing |7.1.1| | 1 |
| Emissions not tested could not insert probe |7.4.B.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in wheel arch |6.1.A.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills to floors |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front floors to sills |6.1.B.2| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg next to brake compensator |3.3.A.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central out rigger |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength central out rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger and quarter panal |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing and floor pan corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing floor pan |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting box section |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer box section |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis inner lower arch |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength under bonnet |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner and outter |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch near susp strut (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch near susp strut (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf, rear mount rear of arch (5.3.6 (a) (i)) | 1 |
| Nearside Brake load sensing valve defective and function impaired mounting corroded |3.6.E.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill in front of rear axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill in front of rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill in front of rear axle x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie in front of rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassie in front of rear axle x4 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie behind rear axle x3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassie behind rear axle x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill behind rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill behind rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member behind rear axle |2.4.A.3| | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner valance |6.2.2 |d| |i|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure end fixing to link bar |2.4.G.1| | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Nearside outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Offside outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Nearside inner sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Offside inner sill (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside inner sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside inner sill (7.1.1 (a) (i)) | 1 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired Nearside in numerous places (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside in numerous places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mounts (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear mounts (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at front of axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear of axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear of axle |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured chassis |3.3.A.2| | 1 |
| Offside Front Lower Seat belt affected by a damaged seat frame |5.2.1b| | 1 |
| Nearside Rear Anti-roll bar which is adjustable, locking device missing |2.4.G.1| | 1 |
| Exhaust has a major leak of exhaust gases exhaust back box broken |7.1.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill corroded |6.1.B.2| | 1 |
| Front Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Outer Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Front engine mounting bracket damaged and likely to fail |6.1.D.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near bump stop |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired sill repair |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp side & hazard |1.1.A.3f| | 1 |
| Offside Rear wheel bearing rough when rotated excessive end float in hub |2.6.1| | 1 |
| Nearside Rear wheel bearing rough when rotated excessive end float in hub |2.6.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner box section (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear (5.3.6 (a) (i)) | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp All lights. (4.4.3 (b)) | 1 |
| Nearside Rear Seat belt anchorage loose Detached. (7.1.1 (b)) | 1 |
| Offside Rear Seat belt anchorage loose Detached. (7.1.1 (b)) | 1 |
| Front Prop shaft bearing excessively worn Both front and centre bearings. (6.1.7 (b) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner cill/arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded cill/arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chasis/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded hanger/chasis/outrigger |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded and outer cill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded and outer |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear arch and floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded arch and floor |2.4.A.3| | 1 |
| Offside Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hangers (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out riger (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached wish bone rear bush (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension arm pin or bush likely to become detached rear wish bone bush (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Floor insecure (6.2.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer and inner sill |6.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by engine mounting |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering and along inner and outer sill |6.1.1 |c| |ii|| | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced chasis |6.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket area |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger close to spring hanger |6.1.B.2| | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases tail pipe corroded+holed |7.1.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step to sill corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to sill+o/s/f inner sill |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases exhaust snapped at flexi (6.1.2 (a)) | 1 |
| Emissions not tested due to exhaust snapped (8.2.2.2 (e)) | 1 |
| Offside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering wheel arch (6.1.1 (c) (ii)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member to chassis rail (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Stop lamp|s| light intensity significantly reduced interaction |4.3.3 |a| |ii|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panal both sides behind spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axle chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheekl arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Full length chassis |6.1.1 |c| |i|| | 1 |
| Lower engine mounting deteriorated resulting in excessive movement dogbone arm/mount |6.1.D.1a| | 1 |
| Prop shaft bearing excessively worn centre bearing (6.1.7 (b) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s & o/s chassis rails (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases from engine |7.1.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Engine mounting |2.4.A.3| | 1 |
| Rear Body has a sharp edge caused by corrosion Both sides |6.1.C.1| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mountings both sides |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front mounting area |5.3.6 |a| |i|| | 1 |
| Exhaust silencer likely to become detached Shield |8.1.1 |b| |ii|| | 1 |
| Rear Rear position lamp|s| incorrect colour rev lights staying on |1.1.A.3e| | 1 |
| Offside Rear Braking system leaking Leaking from inside drum running down onto wheel |3.6.A.1| | 1 |
| Nearside Rear Leaf spring to axle securing nut insecure U bolt broken |2.4.B.7b| | 1 |
| Centre Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded all 4 wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner wing |several places| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill in front of rear wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill behind rear wheel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hanger mount |2.4.A.3| | 1 |
| Offside Rear position lamp|s| incorrect colour lamp broken |1.1.A.3e| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view Cracked mirror glass also loose. |8.1.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded behind spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in front of spring |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor to arch |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded all over underside of van all marked with yellow chalk |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced off side and near side front inner and outer sills |7.1.1 |a| |i|| | 1 |
| Nearside Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached nut missing (5.3.3 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer and under sill corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Rear All outline marker lamps not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill holed (5.3.6 (a) (i)) | 1 |
| Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Front Position lamp not working side lights inop (4.2.1 (a) (ii)) | 1 |
| Offside Rear Leaf spring anchor bracket modified and seriously weakened |2.4.A.2| | 1 |
| Body has a sharp edge caused by corrosion rear valance and n/s and o/s sill area |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mounts |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring shackle mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring shackle mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and rear sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and rear sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill at rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting innner and outer sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by spring anchor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under sill chassis and cross member by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner wheel arch by spring anchor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above bump stop |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under sill back/step |5.2.6| | 1 |
| Offside Front Inner Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Inner Body has a projection caused by corrosion sill x2 |6.1.C.1| | 1 |
| Nearside Outer Body has a projection caused by corrosion sill x2 |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch and chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch and chassis |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering valance and floor/chassis |6.1.A.1| | 1 |
| Nearside Front Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction of dash has lots of stuff on it partly blocking view of road ahead |3.1 |a| |ii|| | 1 |
| Nearside Rear Position lamp showing white light to the rear and also fog lamp showing white light to rear |4.2.3 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch inner near the chassis is corroded and holed |5.3.6 |a| |i|| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` dash top has lots and lots of stuff on it |8.3.1b| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` dash top has lots and lots of stuff on it |8.3.1e| | 1 |
| Rear Rear position lamp|s| insecure all rear lights are mounted to a panel and that whole panel is insecure |1.1.A.3a| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wing (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front upper chassis rails (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases holed in many places |7.1.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mount outer sill area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Shock area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front inner sill mount area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded by shock |2.4.A.3| | 1 |
| Offside Rear Brake performance not tested (1.2.1 (g)) | 1 |
| Front Anti-roll bar pin or bush excessively worn d bushes x 2 (5.3.4 (a) (i)) | 1 |
| Offside Body component damaged and likely to cause injury mirror back |6.2.1 |a| |i|| | 1 |
| Rear Seat belt stitching incomplete |5.2.2b| | 1 |
| Offside Front Anti-roll bar linkage pin or bush likely to become detached bolt loose (5.3.4 (a) (ii)) | 1 |
| Offside Rear Leaf spring fractured centre leaf broken (5.3.1 (b) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn n/s & o/s (5.3.4 (a) (i)) | 1 |
| Power steering pipe/hose leaking on steering rack union (2.1.5 (a)) | 1 |
| Rear Service brake excessively fluctuating n/s & o/s (1.2.1 (e)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) | 1 |
| Offside Front Wheel bearing rough when rotated & movement (5.1.3 (b) (i)) | 1 |
| Power steering component|s| leaking steering rack. |2.3.3b| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/body |6.1.B.2| | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Nearside Stop lamp|s| not working WHEN SIDE LIGHTS ARE ON |4.3.1 |a| |ii|| | 1 |
| Front Upper Position lamp not working Both (4.2.1 (a) (ii)) | 1 |
| Offside Rear Halfshaft nut missing |4.2.B.3| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint outer worn |2.4.G.2| | 1 |
| Offside Front Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt and has play |2.2.C.1c| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner & outer sill (6.2.2 (d) (i)) | 1 |
| Offside Driver`s seat insecure seat from rear |6.2.A.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion and nearside |6.1.C.1| | 1 |
| Nearside Front Inner Body has a sharp edge caused by corrosion wheel arch inner sill |6.1.C.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Bothside rear |6.1.B.2| | 1 |
| Rear Loading door cannot be secured in the closed position lower lock not working (6.2.1 (e)) | 1 |
| Rear passenger door catch insecure back door bottom lock not working |6.2.B.2| | 1 |
| Reversing lamp inoperative both reversing lights are stuck on and obviosley both show a white light to the rear |4.6.1 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by shocker |2.4.A.3| | 1 |
| Front Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step x 2 |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced front of step and under step |7.1.1 |a| |i|| | 1 |
| Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached cross member x 2 |6.1.6 |i| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under sill |5.3.6 |a| |ii|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member x 2 |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |inner & out chassis| |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill / door step area |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill 3x sections |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x3 sections |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |spring hanger area| |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mounting point |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, above rear axle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor/inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor/inner wheel arch |5.3.6 |a| |i|| | 1 |
| Bonnet primary retaining device ineffective Bonnet Wont Open (3.1 (c)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Body Next To Rear Leaf Spring Hanger Corroded + Holed (6.1.1 (c) (i)) | 1 |
| Drivers seat insecure back rest bolts loose (6.2.5 (a) (ii)) | 1 |
| Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s and o/s inner sills |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s and o/s outer sills |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering leg (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Inner Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Inner Body component corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Front Ball joint has excessive play Track rod end |2.2.B.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/shock mount (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking top of engine (6.1.3 (b) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear most bush (5.3.4 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring eye defective |anchor| FRONT SNAP |2.4.B.1b| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner panel (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mou nt |2.4.A.3| | 1 |
| Rear Hydraulic brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system Back axle (1.1.11 (b) (ii)) | 1 |
| Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassie leg outriger |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Lower Steering column universal joint insecure to the extent there is excessive movement at the mountings |2.1.3 |a| |ii|| | 1 |
| Offside Rear Suspension component corroded and seriously weakened bump stop |5.3.3 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and sills |5.2.6| | 1 |
| Nearside Brake cable has wires broken and is significantly weakened worn on inner wheel |3.5.1b| | 1 |
| Offside Brake cable has wires broken and is significantly weakened worn on inner wheel |3.5.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded step & inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step & inner sill |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing / inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing / inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing under bonnet |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded bulkhead under bonnet |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch x 5 |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch x 4 |2.4.A.3| | 1 |
| Track rod end ball joint has excessive play o/s/f |2.2.B.1f| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s sill |6.1.B.2| | 1 |
| Rear position lamp|s| not working n/s/r |1.1.A.3b| | 1 |
| Obligatory mirror insecure o/s/f |8.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer step area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf shackle |2.4.A.3| | 1 |
| Central Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Nearside Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Offside Rear Sub-frame pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at rear bump stop |2.4.A.3| | 1 |
| Offside Front drive shaft coupling bearing fastener fractured |2.5.C.2b| | 1 |
| Nearside Front Braking system leaking brake flexi |3.6.A.1| | 1 |
| Offside Front Steering arm deformed and unserviceable |2.2.C.1d| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner to outer sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |sev places| |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassies |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner side chassis area next to top shock absorber mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer side chassis area next to top shock absorber mount |2.4.A.3| | 1 |
| Lower An item not tested |Manual| | 1 |
| Offside Rear Lower Leaf spring shackle pin not correctly positioned |2.4.B.3a| | 1 |
| Offside Front Body insecure and dangerous to other road users Bumper Insecure |6.1.B.1b| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Outer Sill In Several Places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 1 |
| Brake pedal fractured |3.3.A.1a| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring shackle mounting. Rear cross member and outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Power steering component|s| leaking nr pump area |2.3.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill and inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill and inner sill |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill and inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill and inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and surround areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and surround areas |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting n/s and o/s brackets still fitted. Cross bar and ball removed |6.6.6| | 1 |
| Nearside Front Driver`s view of an obligatory external mirror materially affected by an obstruction miirror |3.1 |a| |ii|| | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture axel |1.1.11 |a|| | 1 |
| Fuel pipe leaking excessively or a risk of fire pump leaking |6.1.3 |b| |ii|| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded cab and floor |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both steps |5.2.6| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure bolts loose |2.4.G.1| | 1 |
| Nearside Front Braking system leaking under bonnet |3.6.A.1| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded cross member rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis front spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rear shock absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rear shock absorber |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance behind bumper (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance behind bumper (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed x3 (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan to step |6.1.B.2| | 1 |
| Nearside Front Brake pipe inadequately supported also flexy insecure |3.6.B.1| | 1 |
| Offside Front Brake pipe inadequately supported also flexy insecure |3.6.B.1| | 1 |
| Central Prop shaft joint excessively worn Centre joint (6.1.7 (c) (i)) | 1 |
| Fuel system component leaking around injector return (6.1.3 (b) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock top mount area (5.3.6 (a) (i)) | 1 |
| Offside Hazard warning lamps inoperative intermitent on o/s |1.4.B.1b| | 1 |
| Fuel tank insecure rear securing strap badly corroded |6.1.3 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner +outer doorstep area (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret area (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside inner step area (7.1.1 (a) (i)) | 1 |
| Offside Headlamp not in good working order affecting light output |1.2.4a| | 1 |
| Nearside Steering rack gaiter split |2.2.D.1d| | 1 |
| Offside Steering rack gaiter insecure |2.2.D.1d| | 1 |
| External window not made of safety glass, or from safety glazing |on or after 1st June 1978| |6.11.6b| | 1 |
| Offside Rear Upper Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Outer Front Lower Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded front of spring |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal x 2 by rack/by engine offside |2.3.3b| | 1 |
| Fuel tank insecure strap broken front |7.2.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under/top step |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger holed in front of step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & nearside front chassis sections under bonnet below bulkhead holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section holed by front frame rear bush |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal steering rack pipes |2.3.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre cross member holed on nearside |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section above front frame |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing in two places holed & up side of suspension mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis section holed between front frame |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of sill |5.3.6 |a| |i|| | 1 |
| Offside Inner Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outdr sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear cross memeber |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Leaf spring fractured front eye |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye mount at chassis, outrigger etc |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye mount at chassis, outrigger etc |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount, rear crossmember, crossmember near spare wheel etc |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount, rear crossmember, crossmember near spare wheel etc |2.4.A.3| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear brake disc excessively scored |3.5.1h| | 1 |
| Offside Brake cable has a seized clevis joint pivot |3.5.1c| | 1 |
| Rear Towbar retaining device missing bolts x2 |6.6.3a| | 1 |
| Nearside Rear Leaf spring anchor bracket insecure u bolt loose |5.3.1 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired actuator arm missing |1.1.17 |a|| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension arm pin or bush excessively worn bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step corroded and holed |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision step (7.1.1 (a) (ii)) | 1 |
| Nearside Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg under bonnet |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg side of exhaust front pipe |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/box sections/ deck/panelling near hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/box sections/panelling near hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill near anchor |2.4.A.3| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded cross-member |3.1.9| | 1 |
| Offside Front Brake pipe inadequately supported pipe to flexi on inner wing |3.6.B.1| | 1 |
| Bonnet retaining device excessively deteriorated not opening |8.4.2| | 1 |
| Central Statutory seat belt missing stalk |5.1.1| | 1 |
| Nearside Rear rear brake recording little or no effort service |3.7.B.5a| | 1 |
| Position lamp missing all body side lights (4.2.1 (a) (ii)) | 1 |
| Central Drivers view of an obligatory external mirror materially affected by an obstruction phone holder (3.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is severely distorted outer chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front rear mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front rear mounts |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis shock mounts |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis shock mounts |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing strut mount |2.4.A.3| | 1 |
| Exhaust tailpipe positioned so that fumes are likely to enter the passenger compartment |7.1.5| | 1 |
| Towbar retaining device missing bolts |6.6.3a| | 1 |
| Offside rear brake recording little or no effort hand brake |3.7.B.5a| | 1 |
| Offside Front Radius arm rubber bush deteriorated resulting in excessive movement wishbone bush rear |2.4.G.2| | 1 |
| Nearside Front Lower Radius arm has excessive play in a ball joint bottom ball joint |2.4.G.2| | 1 |
| Front Windscreen damaged and affecting the drivers view of the road inside zone A (3.2 (a) (ii)) | 1 |
| Electronic stability control switch not functioning correctly (7.12 (d)) | 1 |
| Fuel cap/sealing device ineffective replacement cap fitted (6.1.3 (b) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded FLOOR PAN AREA WITHIN SEAT MOUNTAIN |5.2.6| | 1 |
| Centre Front Parking brake mechanism/associated mounting prescribed area is excessively corroded FLOOR PAN WITHIN PARK BRAKE LEVER AREA |3.1.9| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3x rear chassis cross members |5.3.6 |a| |i|| | 1 |
| Nearside Outline marker lamp does not illuminate simultaneously with the position lamps rear marker attached to load bed (4.2.2 (a)) | 1 |
| Nearside Outline marker lamp missing forward load bed marker (4.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner wheel arch through to rear of cab, sill perforated with corrosion, inner/outer sill. (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner wheel arch through to rear of cab, sill perforated with corrosion, inner/outer sill. (6.1.1 (c) (i)) | 1 |
| Tailgate corroded and likely to cause injury lower section of tailgate has rotted away, sharp edges left, load security also compromised. (6.2.1 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.4 vs .75 max, no printout due to zero drift (8.2.2.2 (a)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.65 vs .75 (8.2.2.2 (a)) | 1 |
| Nearside Rear Position lamp showing white light to the rear Lens (4.2.3 (a) (ii)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.99 vs 0.75 max (8.2.2.2 (a)) | 1 |
| Offside Outer Front Direction indicator missing |1.4.A.2b| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER & OUTER SILLS |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER & OUTER SILLS |6.1.1 |c| |i|| | 1 |
| Front Service brake grabbing severely 2x bothsides |1.2.1 |c|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2x bothsides |6.1.1 |c| |i|| | 1 |
| Front Fuel system component leaking fuel pump |6.1.3 |b| |i|| | 1 |
| Front Brake disc significantly and obviously worn 2x bothsides |1.1.14 |a| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury inner wing |6.2.1 |a| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer rigers 2x bothsides |6.2.2 |d| |i|| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arches |bothsides| and chassis |6.1.1 |c| |ii|| | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill panel |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill panel |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind shackle |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner-sill |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear x-member |6.1.A.1| | 1 |
| Brake valve leaking loading valve |3.6.A.1| | 1 |
| Offside Inner Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner 1/4 panel |6.1.B.2| | 1 |
| Nearside Rear Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rearward of wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AS MARKED |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both far rear |2.4.A.3| | 1 |
| Nearside Rear Brake master cylinder/servo mounting prescribed area is excessively corroded brake valve |3.6.C.3| | 1 |
| Front Exhaust has a major leak of exhaust gases cut in two (6.1.2 (a)) | 1 |
| All outline marker lamps not working 4 marker light out (4.2.1 (a) (ii)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
| Emergency exit door cannot be opened from outside the vehicle (9.1.2 (a)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced front / centre chassis rail (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear closing panels (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear / rear chassis rail outrigger (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all four inner flitches badly in several places (5.3.6 (a) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion inner sill area |chalked| |6.1.C.1| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt ball joint dust cover |2.4.G.2| | 1 |
| Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt ball joint dust cover |2.4.G.2| | 1 |
| Nearside Front Lower Brake pipe inadequately supported flexi pipe not supported |3.6.B.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Front Lower Steering column universal joint retaining device missing |2.1.6| | 1 |
| Front Body has a projection caused by damage bumper |6.1.C.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering step sill |6.1.A.1| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded pump to rack |2.3.2| | 1 |
| Oil leaking excessively from engine Dripping on floor |8.4.1 |a| |i|| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush rear most |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section near leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section near leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2 sections |6.1.1 |c| |i|| | 1 |
| Front Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Outline marker lamp missing n/s and o/s (4.2.1 (a) (ii)) | 1 |
| Fuel pipe insecure Diesel heater pipe (6.1.3 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis / in engine bay (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure Bolt missing (5.3.3 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar missing |5.3.3 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill off side inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering rear spring atatchment (6.1.1 (c) (ii)) | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering rear spring hanger (6.1.1 (c) (ii)) | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering corroded (6.1.1 (c) (ii)) | 1 |
| Fuel system component leaking injector 4 |7.2.3| | 1 |
| Brake valve insecurely mounted chassis/corroded |3.6.A.2a| | 1 |
| Nearside Outer Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Position lamp not working x3 (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working + White (4.4.1 (a) (ii)) | 1 |
| Nearside Position lamp not working x2 (4.2.1 (a) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd Centre Bearing Crossmember Holed (6.1.1 (c) (i)) | 1 |
| Front Suspension arm pin or bush excessively worn Both Inners (5.3.4 (a) (i)) | 1 |
| Speedometer clearly inoperative Works As A Rev Counter (7.8 (b) (ii)) | 1 |
| Brake performance not tested Rear Brakes Inoperative (1.2.1 (g)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill + Under Step Holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Brake cable has restricted free movement Tight (1.1.15 (e)) | 1 |
| Offside Position lamp not working x3 Side Markers (4.2.1 (a) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above A Centre Bearing (6.1.1 (c) (i)) | 1 |
| Offside Suspension arm has excessive play in a pin/bush wishbone bolt loose |2.4.G.2| | 1 |
| Position lamp not working O/s Rear Side Marker |4.2.1 |a|| | 1 |
| Position lamp not working 2 N/s Rear Side Marker |4.2.1 |a|| | 1 |
| Rear fog lamp missing Rear |4.5.1 |a| |ii|| | 1 |
| Service brake effort inadequate at a wheel N/s Rear |1.2.1 |a| |i|| | 1 |
| Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner door step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of cab corner (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of cab corner (7.1.1 (a) (i)) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement Both front bushes |2.4.G.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded of rear springs both |2.4.A.3| | 1 |
| Body panel insecure rear door |6.2.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring fractured Front shackle eye (5.3.1 (b) (i)) | 1 |
| Rear Service brake application uneven across the axle nearside lagging |3.7.D.2b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded various holes chassis/box sections near hanger |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside chassis next to tank |5.2.6| | 1 |
| Rear Exhaust system not adequately supported insecure and holed |7.1.1| | 1 |
| Rear Brake pipe inadequately clipped axle pipes |3.6.B.1| | 1 |
| Nearside Front Upper brake caliper securing device missing bolt missing |3.5.1j| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section behind hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near hanger |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded behind spring hanger area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch/floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger x2 |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded mid outrigger |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` wipers not seating |8.3.1b| | 1 |
| Stop lamp|s| adversely affected by the operation of another lamp both sides |4.3.3 |b|| | 1 |
| Position lamp not working all not working |4.2.1 |a| |ii|| | 1 |
| Fuel system component leaking top of fuel filter housing |7.2.3| | 1 |
| engine mounting deteriorated resulting in excessive movement gear box mount loose |6.1.D.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded centre inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded centre inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section near spring mount rear. |2.4.A.3| | 1 |
| Offside Rear Leaf spring eye defective |shackle| front mount |2.4.B.1b| | 1 |
| Offside front brake binding after brake applied |3.7.B.1| | 1 |
| Nearside Front Brake prescribed area is excessively corroded ABS Mount |1.1.21 |e| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour showing white,lens damaged |1.4.A.2f| | 1 |
| Offside Inner Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front position lamp|s| not working side lights |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working side lights |1.1.A.3b| | 1 |
| Nearside Rear position lamp|s| not working tail light |1.1.A.3b| | 1 |
| Offside Track rod end loose lock nut loose |2.2.B.1d| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to door step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill/door step |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded mid cross member by n/s rear spring front hanger |2.4.A.3| | 1 |
| Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Centre Rear Drive shaft uj which forms part of the suspension has an incorrectly seated universal joint flange |2.4.G.4c| | 1 |
| Fuel tank insecure forward strap corroded |6.1.3 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step under vehicle |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step under vehicle |5.2.6| | 1 |
| Offside Rear Leaf spring fractured around forward bush |2.4.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill sections |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill sections |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger around rear shackle |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner step and sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded top mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by strut |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by strut top mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis top above subframe mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced chassis top by engine mounting |6.1.1 |a| |i|| | 1 |
| Nearside Rear Valve stem seriously damaged excessively perished |4.1.D.1e| | 1 |
| Offside Rear Valve stem seriously damaged excessively perished |4.1.D.1e| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Various places above front to rear handbrake cable |6.1.B.2| | 1 |
| Nearside Rear Seat belt not functioning as intended missing |7.1.2 |c|| | 1 |
| Offside Rear Seat belt not functioning as intended missing |7.1.2 |c|| | 1 |
| Central Rear Seat belt not functioning as intended missing |7.1.2 |c|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inappropriatly repaired sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill inappropriatly repaired (6.2.2 (d) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting complete sill (6.2.2 (d) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting complete sill (6.2.2 (d) (i)) | 1 |
| Central Vehicle structure is fractured and structural rigidity is significantly reduced chasis split (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced chasis split (6.1.1 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both steps has holes |as chalked| |6.1.B.2| | 1 |
| Body has a projection caused by corrosion Both sides where step meets body |as chalked| |6.1.C.1| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill/doorstep |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis outrigger |2.4.A.3| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired mounting bracket mishaped |3.6.E.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by leaf spring front mount |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Doorstep,inner and outer sills by seat mounting corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength backing sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet and under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt outer [insecure] (6.1.7 (g) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step area to body (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill backing to body area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to under body area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under body sill backing to cross member area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength under body to floor area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength under body to floor area (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arches to floor area [not fully seem welded] (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired cross member areas spring mountsx2 (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired sill backing to under body area (5.3.6 (a) (i)) | 1 |
| Rear Loading door cannot be secured in the closed position x 2 |6.4.1| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired under arch/corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chasis under seat |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step/under sill back |5.2.6| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill/wheel arch |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wing/ arch by engine mounting frame |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/wheel well |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/wheel well |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foot step |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point ? |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill x3 |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf mount x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front leaf mount x2 |2.4.A.3| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn n/s o/s D bushes (5.3.4 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced over axle (6.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of outer sill within 30 cm of A mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of outer sill within 30 cm of A mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of inner sill within 30 cm |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring point (5.3.6 (a) (i)) | 1 |
| Nearside Body insecure to the extent that stability is seriously impaired inner and outer sills corroded |6.2.2 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step under vehicle |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step under vehicle |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail behind shock absorber |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired sill not seem welded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis above leaf spring, welding peeled away |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor where spare wheel seats |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis front of rear leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at the front of rear leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to chassis |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis sill |6.1.B.2| | 1 |
| Offside Rear Lower Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Body insecure and dangerous to other road users n/s/f bumper |6.1.B.1b| | 1 |
| Front wheel bearing rough when rotated both |2.5.A.2| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded by middle outrigger |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded by front outrigger |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near leaf spring |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded near shocker
|2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring on valance (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring on valance x2 (5.3.6 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill areas |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step areas |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step areas |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill areas |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner/outer sill and cross member areas |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill/ cross member areas |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected chassis leg areas at load valve |1.1.21 |e| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Front Brake pedal actuating cable wires broken and cable significantly weakened |3.3.A.1f| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine and above limit (8.2.2.2 (b)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch and chassis leg holed and corroded various marked in yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch and chassis leg holed and corroded various marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Body insecure cill patch not welded (6.2.2 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor behind wheel marked in yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured WELDED AT FRONT (5.3.1 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting insecure rear bolt loose |5.3.3 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger |chassis| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger |chassis| |2.4.A.3| | 1 |
| Nearside Front Fuel tank insecure |6.1.3 |a| |i|| | 1 |
| Headlamp not working on main beam both front |1.7.5a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger spring mount |2.4.A.3| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush front pin/bush |2.5.A.1c| | 1 |
| Nearside Front Body has an unsafe modification rear step (6.2.1 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner arch (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner arch in multiple locations (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting spring mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting spring hanger (6.2.2 (d) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cross member (6.2.2 (d) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cross member second to rear (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension arm insecure and impairing directional stability rear bolt loose (5.3.3 (a) (ii)) | 1 |
| Nearside Front Suspension component attachment bracket/mounting likely to become detached bolts missing from drive flange to hub (5.3.3 (a) (ii)) | 1 |
| Exhaust gas recirculation valve obviously defective Pipe missing/blanked off |8.2.2.1 |a|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play Arm |2.1.3 |b| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member badly corroded where it meets inner arch close to rear spring hangers (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear cross member badly corroded where it meets inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corroded/holed (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corroded/holed (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases front section holed [ thin ] (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases rear section rust holed |7.1.2| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure rear u bolts loose |2.4.B.7b| | 1 |
| Offside Front Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Outer Rear Lower Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Centre Front Upper Fuel hose leaking |7.2.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded X-member |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Fuel system component leaking number 4 injector |7.2.3| | 1 |
| Power steering component insecure Bottle (2.1.5 (d) (i)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected o/s/f inner flitch under bonnet (5.3.6 (a) (ii)) | 1 |
| Suspension arm ball joint excessively worn o/s & n/s front lower (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Headlamp aim beam image obviously incorrect wrong image |1.8.A.1b| | 1 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassi over axle next to comp valve mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill floor chassis box section step all excessively corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected step excessssively corroded |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind road wheel. |5.3.6 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member | all marked yellow | |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area | all marked yellow| |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area near fuel tank all marked yellow |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch /chassis |2.4.A.3| | 1 |
| Nearside Inner Front Upper Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking |1.1.3 |d|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near back of spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / sills area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / chassis areas (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / chassis areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush d |2.4.G.2| | 1 |
| Nearside Front Front position lamp|s| not working roof marker light |1.1.A.3b| | 1 |
| Offside Rear Seat belt fluffed or frayed sufficient to obstruct correct operation of the belt |5.1.B.3b| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D-bushes (5.3.4 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded rear of cab all the way across |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear leaf spring hanger area (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear leaf spring hanger area (6.1.1 (c) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded Wing |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases down pipe flexi |7.1.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor marked in yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower outer door sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured middle leaf broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in many places as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / corner arch (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength In wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Front Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Load valve area |6.1.A.1| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush hole on bar elongated |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush hole on bar elongated |2.4.G.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion bumper loose |6.1.C.1| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i)) | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassi /wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step - belt |7.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced chassis |6.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel - swing shackle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - swing chassis |5.3.6 |a| |i|| | 1 |
| Loading door cannot be secured in the closed position side door |6.4.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back panel - swing shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch - swing shackle |2.4.A.3| | 1 |
| Offside Front Position lamp switch faulty |1.1.A.1| | 1 |
| Track rod end ball joint has excessive play both sides inner |2.2.B.1f| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides front shocker mounts |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides chassis corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner and outer sills corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner chassis corroded |6.1.B.2| | 1 |
| Offside Front Outer Body has a sharp edge caused by corrosion sill to door step |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear wheel arch area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shocker area |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill seatbelt |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
| Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foot step area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foot step area |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch area
|2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing by engine mounting |6.1.B.2| | 1 |
| Nearside Sub-frame severely distorted |2.4.G.1| | 1 |
| Nearside Front Seat belt stitching badly frayed passenger belt |5.2.2b| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering strut top mount corroded and holed |6.1.A.1| | 1 |
| Offside Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Step (6.2.2 (d) (i)) | 1 |
| All direction indicators not working stays on |4.4.1 |a| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn most rear |5.3.4 |a| |i|| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement can not be opened |7.2.4b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near to leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near to leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near to step |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement front bush |bolt loose| |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired suspension area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension area/step area (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Next to engine subframe mounting. (6.1.1 (c) (i)) | 1 |
| Body panel damaged and likely to cause injury tailgate (6.2.1 (a) (i)) | 1 |
| Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view passenger door mirror |8.1.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear coner (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower (5.3.4 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer and inner sill (6.1.1 (c) (i)) | 1 |
| Bonnet retaining device ineffective will not open |8.4.2| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement most rear bush, both sides |2.4.G.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rear spring eye chole in sill |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded spring mount upper in wheel arch |2.4.A.3| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded valance corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength s absorber area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength s absorber area |5.3.6 |a| |i|| | 1 |
| Headlamp cleaning device inoperative missing |1.7.2| | 1 |
| Outer Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Integral body structure is excessively corroded adversely affecting the braking or steering |6.1.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Centre Front Exhaust has a major leak of exhaust gases |6.3.2a| | 1 |
| Nearside Rear position lamp|s| incorrect colour |1.1.3b| | 1 |
| Offside Rear Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |6.4.B.2| | 1 |
| Nearside Rear passenger door catch insecure lower catch |6.2.B.2| | 1 |
| Offside Inner Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Inner Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Seat belt stitching incomplete |5.2.2b| | 1 |
| Rear Lower Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Brake pipe inadequately clipped front to rear brake pipe not clipped in place and sitting on over brake pipes as marked |3.6.B.1| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed in two places as marked |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed as marked |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed as marked |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement as marked |2.4.G.2| | 1 |
| Centre Inner Suspension component mounting prescribed area is excessively corroded o/s sill |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded centre sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount area (5.3.6 (a) (i)) | 1 |
| Power steering component leaking pump (2.1.5 (a)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis by gearbox (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by brake load valve |6.1.B.2| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded upper arch |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion lower wing panel |6.1.C.1| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded to steering rack |2.3.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing under wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front rear spring hanger area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring hanger areas |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner bay |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hanger plate |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases front pipe and rear silencer |7.1.2| | 1 |
| Power steering component|s| leaking steering rack or pipes |2.3.3b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced various places mark with ye;;ow choke |6.1.1 |c| |i|| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outregger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outregger |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WING X2 (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced three area |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced three area`s |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced three area`s |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch two area`s |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch two area`s |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Body component insecure arch four area`s |6.2.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near spring hanger |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near spring hanger |6.1.A.1| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement both front |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement REAR BUSH |2.4.G.2| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNERWING |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded DOORSTEP |5.2.6| | 1 |
| Emissions not tested DUE TO EXCESS SMOKE |7.4.B.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step and floorarea |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| All position lamps not working All front and rear |1.1.A.3b| | 1 |
| Headlamp aim beam image obviously incorrect nearside and offside |1.8.A.1b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill/outer sill |5.2.6| | 1 |
| Nearside Upper Seat belt anchorage prescribed area is excessively corroded step sill corroded |5.2.6| | 1 |
| Offside Upper Seat belt anchorage prescribed area is excessively corroded step sill |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded step dill |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked on vehicle |6.1.B.2| | 1 |
| Front Shock absorber has a serious fluid leak both |2.7.3| | 1 |
| Shock absorber has an excessively worn bush osf shocker top bush |2.7.4| | 1 |
| passenger door hinge insecure sliding door |6.2.B.2| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner driver step in two places |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner front lower wheel arch/sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above propshaft |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper wheel arch |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing x 2 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Lower Body component corroded and likely to cause injury step |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Body component corroded and likely to cause injury step |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower sill |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength adjacent to strut mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner lower wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower rear of wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner sill |hole| |6.1.1 |c| |i|| | 1 |
| Body insecure and dangerous to other road users centre exhaust |6.1.B.1b| | 1 |
| Fuel cap/sealing device sealing washer missing cap |7.2.4c| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre chassis |2.4.A.3| | 1 |
| Nearside Outer Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Brake load sensing valve inoperative and ABS not fitted or inoperative Load compensating valve has been by-passed by the brake pipes |1.1.17 |c| |ii|| | 1 |
| Nearside Front Brake hose excessively twisted Hose mounting bracket insecure |1.1.12 |b| |ii|| | 1 |
| Front Prop shaft securing bolt missing At Gearbox Flange |6.1.7 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step areas |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch areas |5.3.6 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner arch areas |1.1.21 |e| |i|| | 1 |
| Nearside Front Brake pipe leaking BEHIND FUEL FILTER |3.6.A.1| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step holed |6.1.1 |c| |i|| | 1 |
| Nearside Brake pipe leaking BEHIND FUEL FILTER |3.6.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR SPRING HANGER |6.1.B.2| | 1 |
| Offside Front Radius arm rubber bush bonding deteriorated resulting in excessive movement O/S/F LOWER ARM REAR BUSH |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of spring (5.3.6 (a) (i)) | 1 |
| Stop lamp(s) adversely affected by the operation of another lamp both sides light up with position lamps (4.3.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load sensing valve |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis and inner arch |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis/inner arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded NEARSIDE AND OFFSIDE REAR CHASSIS |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded NEARSIDE AND OFFSIDE REAR CROSS-MEMBER |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded OFFSIDE FRONT INNER WING |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering CHASSIS |NEAR FUEL TANK| |6.1.A.1| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt NEARSIDE AND OFFSIDE FRONT |2.4.G.2| | 1 |
| rear brake recording little or no effort NEARSIDE AND OFFSIDE REAR |3.7.B.5a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outer doorstep |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing near top shock absorber mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing near top shock absorber mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near spring hanger. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker top mounting. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near top shocker mounting. |6.1.B.2| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of innersill |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded DOOR STEP |5.2.6| | 1 |
| Nearside Rear Leaf spring to axle securing nut insecure U BOLT |2.4.B.7b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded end of sill and inner |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg behind road wheel |2.4.A.3| | 1 |
| Nearside Front Fluid suspension leaking |2.4.D.2| | 1 |
| Outer Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Sills |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sills |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Plus chassis and at front anchor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded By rear spring eye |2.4.A.3| | 1 |
| Offside Rear Leaf spring cracked At front anchor |2.4.B.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing plus front chassis |2.4.A.3| | 1 |
| Offside Front Lower Radius arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering to rear x4 |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering to rear x5 |6.1.A.1| | 1 |
| Nearside Rear Leaf spring shackle bracket fractured front |2.4.B.6b| | 1 |
| Offside Inner Seat belt insecurely fixed to the seat 3rd row back |5.2.1a| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer cill (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower brake drum contaminated by oil or grease |3.5.1f| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment comes to its stop |1.1.6 |c|| | 1 |
| Offside Front Brake cable damaged |1.1.15 |a|| | 1 |
| Nearside Rear Lower Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Rear Lower Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is inadequately repaired X2 (1.1.21 (e) (i)) | 1 |
| Nearside Front Body insecure and dangerous to other road users wing insecure |6.1.B.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and outer sill |5.2.6| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area front of leaf spring . (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Behind rear wheel (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Behind rear wheel. (6.1.1 (c) (ii)) | 1 |
| Rear Emergency exit door cannot be opened from outside the vehicle (9.1.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt stitching badly frayed 2nd ROW |5.2.2b| | 1 |
| Centre Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near front sub frame as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near front engine mount as marked (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Main chassis rail by fuel tank |6.1.B.2| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Speakers. |3.1 |a| |ii|| | 1 |
| Anti-roll bar linkage pin or bush excessively worn both d bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill|small hole to rear| |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area as marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Brake hose twisted |found during steering lock to lock check| O/S/F INSECURE |2.2.D.2b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/R CHASSIS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/F OUTRIGGER |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/F INNER WING |6.1.B.2| | 1 |
| Offside Stop lamp(s) adversely affected by the operation of another lamp flashes with indicator (4.3.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill hole (5.3.6 (a) (i)) | 1 |
| Offside Hazard warning lamps inoperative not working (4.4.1 (e)) | 1 |
| Nearside Brake cable damaged cable broken |1.1.15 |a|| | 1 |
| Offside front brake binding hose |3.7.B.1| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired arch/body mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring hanger mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring hanger mount |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill holed front and rear |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill holed |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed, just below step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded support panel holed and corroded, under wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded support panel holed and corroded, under wing |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step/sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step/sill |6.1.1 |c| |i|| | 1 |
| Nearside Upper Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| engine mounting deteriorated resulting in excessive movement engine stabilizer |6.1.D.1a| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced significant corrosion near side front wheel arch, near side rear quarter,
offside rear quarter.
near side front to rear inner sill, offside front drivers door step. (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in various places |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis round bump stop |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis behind headlamp |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis behind headlamp |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis round bump stop |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis near spring hanger |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded plus engine mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached lower ball joint nut loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by damage wing/bumper |6.1.C.1| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/chassis |2.4.A.3| | 1 |
| Offside Rear Braking system leaking metal brake pipe |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired STRUT TOP MOUNTING AREA (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength STRUT TOP AREA (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength foot step area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger in front of axle (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch / floor area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member / spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member / spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill quarter (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear out rigger corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger in front of axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering side of chassis (6.1.1 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheelarch - spring/shock mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheelarch - leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Inner wheelarch - leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering Chassis rail |6.1.1 |c| |ii|| | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering Chassis rail |6.1.1 |c| |ii|| | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis near bulkhead |5.3.6 |a| |i|| | 1 |
| Offside Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced sill |6.1.1 |b| |ii|| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front and rear outter and inner sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded step to sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded arch rear to arch top |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded arch x 2 |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear sill |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill x 2 |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded arch rear |2.4.A.3| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp by position lamp - similar brightness and leaking light |1.2.1f| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Arch rear to chassis |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded arch rear complete |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner rear step |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 1 |
| Front Body has a sharp edge caused by corrosion bumper |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sills, inner and outer |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sills, inner and outer |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is severely distorted valance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger behind axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger behind axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg over axle |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded under arch |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp faulty in operation |1.1.A.3f| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint bottom ball joint |2.4.G.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wing |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill infant of wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing/Chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet (6.1.1 (c) (ii)) | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack end (2.3 (a) (i)) | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack end (2.3 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength very rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting |5.3.6 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front top of chassis corroded through under bonnet |6.1.B.2| | 1 |
| Entrance/exit door emergency control inoperative rear emergency inner operating handle missing |6.2.C.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front chassis sections corroded through behind wheels |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wing corroded through |6.1.B.2| | 1 |
| Nearside Stop lamp not in good working order |function impaired| |1.3.2b| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s and o/s front door steps under vehicle |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rig (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rig (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush D bush |2.4.G.2| | 1 |
| Offside Front Outer Integral body structure is deformed and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / step (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and inside strut holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and cross member at HAND BRAKE CABLE BRACKET |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger outtriger and surrounding area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger and surrounding area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger and surrounding areas (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger and surrounding area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front end of spring mounting and sill and inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Towbar fractured seriously affecting its strength within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS NEAR SHOCKER MOUNT (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing excessively worn 2 OF BOTH (6.1.7 (b) (i)) | 1 |
| Offside Outline marker lamp not working Centre |4.2.1 |a|| | 1 |
| Offside Rear Panhard rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| All outline marker lamps missing Nearside and offside (4.2.1 (a) (ii)) | 1 |
| Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced Cab rear outrigger (6.1.1 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center chassi corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step corroded (6.1.1 (c) (i)) | 1 |
| Nearside Brake pipe excessively damaged from comp vave (1.1.11 (c)) | 1 |
| Inner Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at spring mounting area front mount as marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength At front mount (5.3.6 (a) (i)) | 1 |
| Rear Brake prescribed area is excessively corroded Chassis at load valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension arm missing |2.4.G.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross memder |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rearward leaf spring mount |5.3.6 |a| |i|| | 1 |
| engine mounting deteriorated resulting in excessive movement dog bone mounting |6.1.D.1a| | 1 |
| Offside Front engine mounting bracket insecure and likely to fail engine X-member bolt sheard off |6.1.D.1b| | 1 |
| Nearside Rear Outer Wheel stud hole elongated |4.2.A.1d| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed, complete |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded behind seat belt mounting area holed |2.4.A.3| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wheel arch sharp (6.2.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded top mount area under wing |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing behind spring |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis x member |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner sills |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded side sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded side sill |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering Near fuel tank |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering Inner wheel arch |6.1.A.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member marked 3 places |6.1.B.2| | 1 |
| Offside Rear position lamp|s| not working side |1.1.A.3b| | 1 |
| Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance show white light to rear |1.4.A.2e| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis behind wheel |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturers specified limit .68 (8.2.2.2 (a)) | 1 |
| Central Brake cable damaged (1.1.15 (a)) | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 1 |
| Fuel tank insecure fuel tank strap fractured |7.2.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside and offside inner sills and step area |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear crossmember and inner body |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear hanger bracket |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded front inner wing and chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside rear inner outer sills |2.4.A.3| | 1 |
| Nearside Inner Rear An item not tested |Manual| | 1 |
| Nearside Front Obligatory mirror seriously obscured affecting the rear view glass missing |8.1.2a| | 1 |
| Supplementary restraint system warning lamp indicates a fault airbag light on |7.1.6 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked |6.1.B.2| | 1 |
| Braking system leaking both side rear |3.6.A.1| | 1 |
| Track rod end ball joint has excessive play n/s |2.2.B.1f| | 1 |
| Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt o/s |2.2.C.1c| | 1 |
| Offside Front Driver`s seat insecure bolt/pin missing from underside of seat, causing excess movement |6.2.A.1| | 1 |
| Offside Front Steering column shaft retaining device insecure rubber uj from shaft to rack top pin loose |2.1.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer panel |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step inner panel |5.2.6| | 1 |
| Front Upper Outline marker lamp not working x2 (4.2.1 (a) (ii)) | 1 |
| Nearside Rear brake drum contaminated by oil or grease |3.5.1f| | 1 |
| Nearside Rear Outer Seat belt missing |7.1.2 |a|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings closure sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper floor by hinge |6.1.B.2| | 1 |
| Nearside Brake cable insecure cable rubbing wheel |3.5.1d| | 1 |
| Prop shaft bearing housing fractured centre support bush collapsed (6.1.7 (f) (i)) | 1 |
| Nearside Rear Suspension component missing |5.3.3 |a| |ii|| | 1 |
| Offside Inner Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced foot well/inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced foot well /inner sill |6.1.1 |c| |i|| | 1 |
| Front Upper Outline marker lamp not working |4.2.1 |a|| | 1 |
| Outline marker lamp not working sides |4.2.1 |a|| | 1 |
| Nearside Rear Lower Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole complete sill |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole complete sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole complete sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole complete sill |6.1.B.2| | 1 |
| Front Position lamp not working both front (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting chassis |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting bracket area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting bracket area |6.1.B.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D Bushes X2 (5.3.4 (a) (i)) | 1 |
| Nearside Rear Stop lamp does not face the rear |1.2.1a| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced inter action with other lamps |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Stop lamp|s| light intensity significantly reduced inter action with other lamps |4.3.3 |a| |ii|| | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced inter action with other lamps |4.4.3 |a|| | 1 |
| Offside Front Upper Brake master cylinder/servo mounting prescribed area is excessively corroded top chassis member,, under bonnet |1.1.21 |e| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre, outer sill panel |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre, inner sill panel |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre, inner sill panel |6.1.1 |c| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre/rear chassis member, front mounting point of rear leaf spring,, in various places |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/wing panel |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member, and floor panel, by shock absorber mounting point,, |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel, by rear spring mounting point |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member, by spring mounting point |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel/body member, by spring mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel/body member by spring mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired by spring mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member |5.3.6 |a| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s and n/s rear cargo floor panels |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by shock absorber mounting point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member by spring mounting point |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member, by shock absorber mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis member, by brake valve assembly |1.1.21 |e| |i|| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D rubber |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D rubber |2.4.G.2| | 1 |
| engine mounting deteriorated resulting in excessive movement bottom |6.1.D.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear floor |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step panel |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Step panel |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired Floor panel |2.4.A.3| | 1 |
| Nearside Rear Seat belt insecurely fixed to the seat flexible stalk not attached |5.2.1a| | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner door step |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Shock mount snapped out of chassis |5.3.6 |a| |ii|| | 1 |
| Central Brake pipe leaking on a hydraulic braking system Pipe burst |1.1.11 |b| |ii|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded Wheel arch to inner wing area |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded Wheel arch to inner wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mount to inner sill |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis by L/S/Valve |6.1.A.1| | 1 |
| Access panel cannot be secured in the closed position pipe store on roof |6.4.1| | 1 |
| Nearside Outline marker lamp not working all three |4.2.1 |a|| | 1 |
| Central Rear Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner door step (yellow Chalk) (6.2.2 (d) (i)) | 1 |
| Front Fuel tank insecure missing (6.1.3 (a) (i)) | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 1.19, limit 0.68 (8.2.2.2 (f)) | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 1 |
| Brake pressure build up too slow |3.3.E.6| | 1 |
| Offside Front Brake hose excessively damaged insecure |1.1.12 |b| |ii|| | 1 |
| Offside Front Brake disc insecure incorectly seated |1.1.14 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced underbody sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner flitch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under body sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch complete surrounding |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch complete surrounding |5.3.6 |a| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step-sill-floor box area |6.2.2 |d| |ii|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step-sill-floor box area |6.2.2 |d| |ii|| | 1 |
| Nearside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired entire outer sill |6.2.2 |d| |ii|| | 1 |
| Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired entire outer sill |6.2.2 |d| |ii|| | 1 |
| Nearside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired entire inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired entire inner sill |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box & leafspring hangers |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box & leafspring hangers |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outerigger corner |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outerigger corner |5.3.6 |a| |i|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded inner arch area |2.2.C.1h| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear of arch area holed and corroded |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear arch area holed and corroded |5.2.6| | 1 |
| Offside Front Brake actuating linkage mounting prescribed area is excessively corroded hole by flexi brake pipe inner wing |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed by spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis holed near spring area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer and inner sills holed |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner sill holed and corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor holedbetween spring area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner arch area holed |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded x3 |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded x3 |2.4.A.3| | 1 |
| Rear Oil leaking continuously from transmission posing a serious risk to road safety Diff |8.4.1 |a| |ii|| | 1 |
| Nearside Rear Lower Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing top s/abs fixing |5.3.6 |a| |ii|| | 1 |
| Nearside Front Horn not working (7.7 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind rear spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer rigger (6.1.1 (c) (i)) | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor |6.1.1 |c| |i|| | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn front anchor bush |5.3.4 |a| |i|| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle side loading door |6.2.B.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired cross member |2.4.A.3| | 1 |
| Leaf spring cracked front mount |2.4.B.1a| | 1 |
| Nearside Front Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint LINK |2.4.G.2| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings o/s sill. n/s sill. o/s rear x member. n/s rear x member. n/s foot well step. o/s and n/s wheel mudguard[van floor joint] |6.1.B.2| | 1 |
| Shock absorber casing damaged externally so the unit does not function n/s rear shock absorber |2.7.2a| | 1 |
| Brake load sensing valve linkage seized rear axel |3.6.E.3| | 1 |
| Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 1 |
| Rear Anti-roll bar modified so the suspension is likely to fail other components (5.3.3 (c) (ii)) | 1 |
| Rear Anti-roll bar has an unsafe modification (5.3.3 (c) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above prop (6.1.1 (c) (i)) | 1 |
| Rear Prop shaft likely to become detached axle pinion bearing worn (6.1.7 (a) (ii)) | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view door mirror |3.3 |b| |ii|| | 1 |
| Offside Front Windscreen in such a condition that visibility through swept area is seriously affected centre |3.2 |c| |ii|| | 1 |
| Central Exhaust silencer insecure box outer cover |8.1.1 |b| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mouning |2.4.A.3| | 1 |
| Offside Rear Seat belt locking mechanism does not secure or release in back of van |5.2.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch / floor area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis behind rear leaf spring mount |2.4.A.3| | 1 |
| Centre Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Lower Body has a sharp edge caused by corrosion bodywork |6.1.C.1| | 1 |
| Offside Lower Body has a sharp edge caused by corrosion bodywork |6.1.C.1| | 1 |
| Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail behind cab marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner step (6.2.2 (d) (i)) | 1 |
| Offside Lower Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded On/at steering rack |2.3.2| | 1 |
| Nearside Leaf spring eye defective |anchor| Rear spring |2.4.B.1b| | 1 |
| Exhaust silencer insecure missing (8.1.1 (b) (i)) | 1 |
| Offside Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Offside Rear Upper Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Offside Rear Lower Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Lower Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Centre Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Axle has inadequate clearance with the bump stop Missing |2.4.A.1a| | 1 |
| Nearside Rear Axle has inadequate clearance with the bump stop Missing |2.4.A.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Cill |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by damage Bumper |6.1.C.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill panel |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Seat belt retracting mechanism defective centre row centre belt |5.2.5b| | 1 |
| Nearside Front Upper coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Front Upper coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside lower inner and outer door steps |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside lower inner and outer door steps |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside outrigger under cab |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside outrigger under cab |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear inner and outer sills |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear inner and outer sills |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside front inner wheel arch |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside front outrigger |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases both boxes |6.1.2 |a|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 1 |
| Offside Stop lamp emits other than a steady red light lens damaged |1.2.1e| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top mount area |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by damage bumper insecure /sticking out |6.1.C.1| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sll |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 1 |
| Offside Front Drag link end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at front spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Nearside Rear Brake cable damaged drums fitted (1.1.15 (a)) | 1 |
| Track rod end loose |2.2.B.1d| | 1 |
| Sub-frame rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Outer Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wheelarch |6.1.C.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` Items on dashboard |8.3.1b| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Items on dashboard |8.3.1e| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wheelarch within 30 cm of strut mounting |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wheelarch within 30 cm of strut mounting |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis |Above axle| |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Chassis |Above axle| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Chassis |Above axle| |6.1.B.2| | 1 |
| Nearside Front Brake disc significantly and obviously worn And offside front. |1.1.14 |a| |i|| | 1 |
| Offside Lower Body panel corroded and likely to cause injury side panel (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body near shackle mounting (5.3.6 (a) (i)) | 1 |
| Offside Track rod end ball joint has excessive play and gaiter split (2.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mounting outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body component likely to become detached mudflap (6.2.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp all interacting (4.4.3 (b)) | 1 |
| Electrical wiring likely to touch hot or rotating parts alarm siren (4.11 (a) (iii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2| | 1 |
| Prop shaft flexible coupling excessively deteriorated Centre mount (6.1.7 (d) (i)) | 1 |
| Rear position lamp|s| not working all rear lights |1.1.A.3b| | 1 |
| Offside Front Seat belt affected by an insecure seat fixing seat broken-loose |5.2.1b| | 1 |
| Offside front brake binding calliper jammed-investigate |3.7.B.1| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Above Bump Stop (6.1.1 (c) (i)) | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength various areas |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing/ chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength chassis bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by rear |rear| spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear |rear| spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back and middle (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inside wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Hazard warning lamps inoperative and rear |1.4.B.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by spring hanger |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Rear Trailer electrical socket |13 pin| not operating the trailer lamps as intended fog inop |1.9.4| | 1 |
| Nearside Body modification likely to adversely affect braking or steering inner sills |6.2.1 |d| |ii|| | 1 |
| Nearside Rear Body modification likely to adversely affect braking or steering floor |6.2.1 |d| |ii|| | 1 |
| Nearside Rear Body modification likely to adversely affect braking or steering inner 1/4 |6.2.1 |d| |ii|| | 1 |
| Offside Rear Body modification likely to adversely affect braking or steering floor |6.2.1 |d| |ii|| | 1 |
| Offside Rear Body modification likely to adversely affect braking or steering inner arch |6.2.1 |d| |ii|| | 1 |
| Offside Inner Body modification likely to adversely affect braking or steering sills |6.2.1 |d| |ii|| | 1 |
| Offside Front Body modification likely to adversely affect braking or steering door step |6.2.1 |d| |ii|| | 1 |
| Nearside Front Body modification likely to adversely affect braking or steering door step |6.2.1 |d| |ii|| | 1 |
| Nearside Front Body modification likely to adversely affect braking or steering inner wheel arch |6.2.1 |d| |ii|| | 1 |
| Nearside Outer Body modification likely to adversely affect braking or steering sill |6.2.1 |d| |ii|| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp interacting |4.2.3 |c|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering CHASSIS RAIL |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering OUTER CHASSIS RAIL INNER WHEEL ARCH |6.1.A.1| | 1 |
| Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt BOTH SIDES |2.4.G.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH LOWER FLOOR |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength INNER SILL LOWER FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH/CHASSIS RAIL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded LEAF SPRING MOUNTING POINTS |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is inadequately repaired INNER AND OUTER SILL |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is inadequately repaired OUTER SILL |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH/FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted Chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength Step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Behind front mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded At mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired Above and to side of rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis by front mount |2.4.A.3| | 1 |
| Nearside Lower Radius arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear box section marked with white chalk |2.4.A.3| | 1 |
| Nearside Front Lower Stub axle distorted |2.5.A.5b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper susp (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step inner rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step inner rear (6.1.1 (c) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member heavily corroded (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step and inner arch |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step and inner arch |5.2.6| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill & step |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ourigger |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under bonnet inner chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts and inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts and inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded brake load valve mount |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing spring mount |2.4.A.3| | 1 |
| Nearside Outer Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Rear Lower Tie bar/rod has excessive play in a pin/bush anti roll bar link bar bushes |2.4.G.2| | 1 |
| Offside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced outer chassis |6.1.1 |a| |i|| | 1 |
| Central Rear Vehicle structure is so deformed it is likely to adversely affect braking or steering cross member park brake cable mounting |6.1.1 |a| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner wheel arch |6.2.2 |d| |i|| | 1 |
| Central Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded within 30 cm of rear suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded within 30 cm of rear suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting O/s rear floor section corroded and holed within 30 cm of front spring hanger mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced O/s rear cross member section corroded and fractured within 30 cm of rear spring hanger mounting (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded behind rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mountings | chassis, inner and outer sills, outer wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mountings and inner sill and outer wheel arch |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded front,centre and rear mounting |centre around gearbox mounting| |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded strut mounting inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top strut mounting inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting |chassis| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting |chassis| |2.4.A.3| | 1 |
| Nearside Front Upper Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Nearside Front Inner Body component corroded and likely to cause injury step |6.2.1 |a| |i|| | 1 |
| Nearside Body component corroded and likely to cause injury inner and outer sills |6.2.1 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills plus more corrosion on rear
all marked with blue paint |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill x3 places
|2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill 1 |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer sill x3 places chalked as shown
|2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger mounter |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill also outer sill x2 plates |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch / floor shocker mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded offside inner sill,under vehicle |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near spring hanger |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill to floor,under vehicle |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch near to top mount |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn lower wish bone rear bush marked yellow |5.3.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn marked yellow |5.3.4 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front to rear inner and outter sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear inner |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear inner arch |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded si8ll |2.4.A.3| | 1 |
| Offside Rear Brake cable inappropriately repaired |3.5.1n| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis
|2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion lower left light quarter
|6.1.C.1| | 1 |
| Driver`s seat insecure pin missing |6.2.A.1| | 1 |
| Oil leaking excessively from engine Engine (8.4.1 (a) (i)) | 1 |
| Offside Outline marker lamp not working center (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp missing center (4.2.1 (a) (ii)) | 1 |
| Central Front Exhaust system insecure Exhaust clamp and rubber missing |6.1.2 |a|| | 1 |
| Fuel tank insecure Front strap broken |6.1.3 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated Step corroded |6.2.4 |a| |i|| | 1 |
| Nearside Front Floor excessively deteriorated Step corroded |6.2.4 |a| |i|| | 1 |
| Nearside Front Floor excessively deteriorated inner sill rear of step corroded |6.2.4 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated inner sill rear of step corroded |6.2.4 |a| |i|| | 1 |
| Nearside Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Track rod end loose lock nut |2.2.B.1d| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded load sensor to chassis |3.3.A.2| | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate limit 0.75 1/m . Actual reading 1.32 1/m. (8.2.2.2 (a)) | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Phone holder |3.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub subframe mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill &step |5.2.6| | 1 |
| Oil leaking excessively from engine engine oil leak (8.4.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension top |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both front chassis behind rear bulkhead |5.2.6| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering top |6.1.1 |c| |ii|| | 1 |
| Nearside Front Brake pipe likely to become detached or damaged to rear on h/brake cable |1.1.11 |d| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cab |6.2.2 |d| |i|| | 1 |
| Nearside Front Upper Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 1 |
| Offside Front Upper Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body chassis |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger and inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis 2 areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis to floor support section |2.4.A.3| | 1 |
| Nearside Front Shock absorber has an excessively worn bush shock absorber not dampening |2.7.4| | 1 |
| Offside Front Shock absorber has an excessively worn bush shock absorber not dampening |2.7.4| | 1 |
| Offside Outer Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Inner Brake pipe leaking |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch to strut area |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis by load valve |6.1.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded rear cross member behind cab all way across |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded panel behind offside front wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded panel behind offside rear wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front out rigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded cross member on centre of floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside inner step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside sills |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside step |5.2.6| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear cab bottom |6.1.B.2| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Centre Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear cab crossmember |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings crossmember above rear axel |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers floor and rear of cab |5.2.6| | 1 |
| Offside All position lamps not working all 3 marker lamps |1.1.A.3b| | 1 |
| Offside Front Steering damper leaking oil engine oil leaking onto suspension and brake components |2.2.C.1f| | 1 |
| Offside Rear Leaf spring fractured leaf broken |2.4.B.1a| | 1 |
| Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS TOP & INNER WING |2.4.A.3| | 1 |
| Rear Brake pipe excessively damaged ON ALXE |3.6.B.2c| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp by indicaters |1.1.A.3f| | 1 |
| Obligatory mirror insecure both outer mirrors |8.1.1| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn Both |2.4.G.4d| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/f o/s/f inner door steps |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear valance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel to chassie |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner wheel arch near shocker mount and holed |2.4.A.3| | 1 |
| Nearside Brake pipe kinked |3.6.B.2b| | 1 |
| Offside Brake pipe kinked |3.6.B.2b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded various places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded various places |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear mount |3.1.9| | 1 |
| Nearside Front Fluid suspension unit damaged and likely to fail |2.4.D.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/box at |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner side panel at |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner side panel at |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower seal |6.1.1 |c| |i|| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp side flaes hwith indicater |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked in yellow chalc |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked in yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger marked in yellow chalk |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately supported flexable braket rusted away |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch by spring mounting |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper face and underside next to sub frame mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock absorber mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area at leaf springs front and rear mounts |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner wheel arch area |6.1.1 |a| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill / below side loading door |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis x2 (6.2.2 (d) (i)) | 1 |
| Offside Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Offside Rear Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced All chassis members and inner sill from front to rear including door step and front inner wing and member corroded |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure is fractured and structural rigidity is significantly reduced All chassis members and inner sill from front to rear including door step and front inner wing and member corroded |6.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At leaf spring anchorage point member |6.1.1 |c| |i|| | 1 |
| Exhaust system not adequately supported exhaust boxes corroded outer skins |7.1.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear wheel arches |6.1.B.2| | 1 |
| Central Outer Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre rigger |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength osr spring hanger mount rusty (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rust near osr spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rust near osr top shock absorber mount |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded center inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear of arm |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 7.0 and black |7.4.B.3b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body outrigger, by shackle |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sills holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sills holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/sill holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step/floor holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing holed within 30cm engine mounting |6.1.B.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear mounting |2.4.G.2| | 1 |
| Nearside Headlamp light source and lamp not compatible HID conversion has been done (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible HID conversion has been done (4.1.4 (c)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect aim not tested |1.8.A.1b| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values excessive black smoke (8.2.2.2 (f)) | 1 |
| Anti-roll bar linkage pin or bush excessively worn nearside & offside rear (5.3.4 (a) (i)) | 1 |
| Offside Brake cable insecure cable insecure into backplate (1.1.15 (c)) | 1 |
| Nearside Front Position lamp not working roof marker |4.2.1 |a| |ii|| | 1 |
| Offside Front Position lamp not working roof marker |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Torque/reaction arm attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch at rear |shackle| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch at rear |shackle| |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner door sill area |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired plates not welded very well |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired subframe mounting areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch seams |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch seams |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis rails |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear chassis rails |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Body has a sharp edge caused by corrosion inner |6.1.C.1| | 1 |
| Offside Rear Leaf spring fractured end eye broken |2.4.B.1a| | 1 |
| Nearside Front Floor excessively deteriorated to floor and door step under vehicle in dangerous corroded condition (6.2.4 (a) (i)) | 1 |
| Offside Front Floor excessively deteriorated to floor and door step in bad corroded condition dangerous (6.2.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing/chassis suspension mount area all excess corrosion (5.3.6 (a) (ii)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength and inner sill panels excessively corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength full length sill panel outer/inner excessively corroded, (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired and outer sills repaired patched spot welded (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill corroded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner qurter corroded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor corroded |6.1.B.2| | 1 |
| Nearside Rear Stop lamp not working 380 |1.2.1b| | 1 |
| Nearside Front position lamp|s| not working 501 |1.1.A.3b| | 1 |
| Offside Front position lamp|s| not working 501 |1.1.A.3b| | 1 |
| Offside Rear fog lamp not working 382 |1.3.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member at shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill areas to front of wheel (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill area 3 holes marked with chalk (6.2.2 (d) (i)) | 1 |
| Driver`s seat insecure one fixing missing from frame |only seat fitted in vehicle| |6.2.5 |a| |ii|| | 1 |
| Lower Steering component mounting prescribed area is excessively corroded colum fitting area floor pan rust hole |2.1.2 |e| |i|| | 1 |
| Offside Driver`s seat insecure re fit bolt and nut in seat frame to secure |only seat fitted in vehicle| |6.2.5 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Wheel arch x 2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded oter sill |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Doorstep |5.2.6| | 1 |
| Offside Outer Front Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Nearside Front Inner Macpherson strut mounting corroded and seriously weakened wheel arch |5.3.3 |b| |i|| | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 1 |
| Nearside Rear Anti-roll bar linkage which is adjustable, locking device missing |2.4.G.1| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock mounting perscribed area corroded |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underbody Sill |6.1.B.2| | 1 |
| Nearside Front Braking system leaking joint between hose and pipe |3.6.A.1| | 1 |
| Steering component casing fixing bolts ineffective |2.1.2 |c| |i|| | 1 |
| Front Statutory seat belt missing centre seatbelt stalk missing |5.1.1| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step holed / corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember corroded |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step holed / corroded |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer step holed |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis , under wheel arch (5.3.6 (a) (i)) | 1 |
| Stop lamp not working All |1.2.1b| | 1 |
| Body component damaged and likely to cause injury rear bumper on both sides (6.2.1 (a) (i)) | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings holed seal in and out below step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in chasis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings axel point inner seal |6.1.B.2| | 1 |
| Offside Front Upper Steering system excessively rough |2.2.D.1| | 1 |
| Nearside Rear Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 1 |
| Front Emergency exit sign missing |6.2.D.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shocker mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded x member both sides of chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded box section to chassis member |2.4.A.3| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake rod mounting bracket broken and rod hanging low |3.1.9| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded valance/box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded valance/box section |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/under body |6.1.B.2| | 1 |
| Headlamp not working on dipped beam dull |1.7.5a| | 1 |
| Offside Headlamp not working on main beam dull |1.7.5a| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour broken lense showing white |1.1.A.3e| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/step |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to step |5.2.6| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner drop sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner drop sill (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre chassis cross member (6.2.2 (d) (i)) | 1 |
| Position lamp not working Both fronts (4.2.1 (a) (ii)) | 1 |
| Position lamp not working Both rears (4.2.1 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Upper chassis near step (6.1.1 (c) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis member holed (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Furthest rear cross member holed (6.1.1 (c) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Reading 1.35 needs to be 1.19 or less (8.2.2.2 (a)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear corner |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is inadequately repaired rear floor both sides |2.4.A.3| | 1 |
| Nearside Rear Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer | holed | |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch holed in two areas |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassie leg x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded forward spring hanger |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sills front leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sills front leaf spring |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded N/S & O/S INNER WHEEL ARCHES BY SHOCK MOUNTING |2.4.A.3| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings N/S/F &O/S/F CHASSIS LEGS |6.1.B.2| | 1 |
| Central Rear Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear valance |2.4.A.3| | 1 |
| Nearside Inner Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Central Front Seat belt pretensioner missing where fitted as original equipment (7.1.4 (a)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis member to inner wing to suspension strut housing |6.1.1 |c| |ii|| | 1 |
| Nearside Front Entrance/exit step significantly damaged |9.7 |a| |ii|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is inadequately repaired inner and outer sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected inner wheel arch |5.3.6 |a| |ii|| | 1 |
| Front Body panel corroded and likely to cause injury both front wings |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount rear |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger |by spring shackle|
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger |by spring shackle| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis split |by compensator mounting| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis split |by bump stop| |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded full length floor to sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |within top strut mounting| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassie leg under bonnet |2.4.A.3| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inside cab |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill rear of cab area |6.1.1 |c| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded middle chassis crosmember |1.1.21 |e| |i|| | 1 |
| Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Hazard warning lamps inoperative all offside |1.4.B.1b| | 1 |
| Driver`s seat insecure nearside rear mounting broken |6.2.A.1| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 7.89% average |7.4.B.3b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail to rear of subframe |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre chassis rail |3.1.9| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer door step |corner |5.2.6| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired top chassis leg under bonnet |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top chassis leg under bonnet |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar modified and seriously weakened |2.4.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vallance and rear chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Stop lamp emits other than a steady red light lens damaged |1.2.1e| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as narked |6.1.B.2| | 1 |
| Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch as marked |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as marked |6.1.B.2| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired Sill |2.4.A.3| | 1 |
| Rear Inner Suspension component mounting prescribed area is excessively corroded Crossmember N/s and O/s |2.4.A.3| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp bulb fitted incorrectly |1.2.1f| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired wing (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch all |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch all |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing insecure |2.4.G.2| | 1 |
| Engine MIL inoperative or indicates a malfunction mill light does not work (8.2.2.2 (g)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake lagging in operation slow to operate (1.2.1 (d)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid load valve leaking (1.1.16 (b) (i)) | 1 |
| Engine MIL inoperative or indicates a malfunction doesnt illuminate (8.2.2.2 (g)) | 1 |
| Brake performance not tested NO BRAKES (1.2.1 (g)) | 1 |
| Front Brake pipe connection leaking on a hydraulic braking system routed behind engine (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Brake cable damaged hand brake cable (1.1.15 (a)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Dropside corroded and likely to cause injury tipper body (6.2.1 (a) (i)) | 1 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view mirror distorted |8.1.2a| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D-Bushes |5.3.4 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Central Front Lower Brake pedal anti-slip provision worn smooth Worn through to metal |1.1.2 |c|| | 1 |
| Nearside Front Upper Position lamp not working Side light on top of cab inop N/S |4.2.1 |a|| | 1 |
| Offside Front Road wheel fixing missing Wheel nut/stud |5.2.1 |a| |i|| | 1 |
| Offside Front Hydraulic brake calliper insecurely mounted Bolt missing |1.1.16 |c| |i|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp possible bad earth |4.4.3 |b|| | 1 |
| Nearside Rear Position lamp showing white light to the rear lens damaged showing white light |4.2.3 |a| |ii|| | 1 |
| Offside Front Position lamp missing o s marker lamp missing |4.2.1 |a|| | 1 |
| Offside Rear Position lamp not working o s marker lamp inop |4.2.1 |a|| | 1 |
| Central Prop shaft bearing likely to break up propshaft bearing excessive play |6.1.7 |b| |ii|| | 1 |
| Central Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Drivers seat base |6.2.2 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step area x2 |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded between spring mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded between spring mounts |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded in 2 Places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Offside Inner Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre and rear inner sill / floor & outer sill / wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body / inner arch |6.1.B.2| | 1 |
| Nearside Front Upper Front position lamp|s| not working marker |1.1.A.3b| | 1 |
| Rear position lamp|s| not working Both upper markerlights |1.1.A.3b| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear sill |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear sill |6.1.B.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded in various places (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded in various places (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under vehicle sill to floor in various places (6.2.2 (d) (i)) | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under vehicle sill to floor in various places (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting body member by spring anchor (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around by spring (6.2.2 (d) (i)) | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of vehicle within 30cm of spring or major anchoring point (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of vehicle within 30cm of spring or major anchoring point (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Exhaust system insecure exhaust ruuber split (6.1.2 (a)) | 1 |
| Nearside Exhaust system insecure middle exhaust rubber (6.1.2 (a)) | 1 |
| Central Front Power steering pipe/hose excessively corroded metal power steering pipe (2.1.5 (g) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at load valve |6.1.B.2| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine 4.99 avg - 1.91 max (8.2.2.2 (b)) | 1 |
| Offside Front Obligatory mirror insecure Held in place with tape (3.3 (b) (ii)) | 1 |
| Rear Towbar attachment defective Electric coupling insecure (6.1.6 (c) (i)) | 1 |
| Nearside Front Floor excessively deteriorated Corroded (6.2.4 (a) (i)) | 1 |
| Drivers seat with a defective structure - Corroded structure at base (6.2.5 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner sill corroded to excess (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner sill corroded to excess (6.2.2 (d) (ii)) | 1 |
| Central Front Prop shaft bearing excessively worn Bush split/perished excessively (6.1.7 (b) (i)) | 1 |
| Fuel tank insecure Held up with ratchet strap (6.1.3 (a) (i)) | 1 |
| Offside Front Leaf spring anchor pin or bush excessively worn - Perished (5.3.4 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened rubbing on wheel rim and rubbed through |3.5.1b| | 1 |
| Windscreen in an unacceptable condition large crack from top to bottom of screen (3.2 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (through wheel arch) (6.1.1 (c) (i)) | 1 |
| Power steering component leaking power steering rack (2.1.5 (a)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front chassis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill, behind rear wheels |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill, in front of rear wheels |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill, in front of rear wheel |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings main chassis, adjacent to rear of step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings main chassis, adjacent to rear of step |6.1.B.2| | 1 |
| Nearside Front Fuel pipe leaking T piece |7.2.3| | 1 |
| Nearside Vehicle structure chassis main member corroded |6.1.2| | 1 |
| Offside Vehicle structure chassis main member corroded |6.1.2| | 1 |
| Centre Vehicle structure chassis cross member corroded |6.1.2| | 1 |
| Centre Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure both link nuts loose insecure |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn - "D" Bush. (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn - "D" Bush. (5.3.4 (a) (i)) | 1 |
| Offside Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Body component corroded and likely to cause injury Lower part of the load bed (6.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill to step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner to step |5.2.6| | 1 |
| Offside Stop lamp|s| likely to become detached |4.3.1 |c| |ii|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bushes (5.3.4 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both inner sill/steps (7.1.1 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis both sides from front spring anchorage back (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn droplink (5.3.4 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached insecure (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill, closing panel & outrigger . Forward of wheel. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill, closing panel & outrigger. Forward of wheel. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear cross member, closing panel & outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear cross member, closing panel & outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength spring area (outrigger) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area (outrigger) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Braking system leaking wheel hub |3.6.A.1| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded load comp valve |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis within 30cm of shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab (6.2.2 (d) (i)) | 1 |
| Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member n/s and o/s (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/door step (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i)) | 1 |
| Body mounting fixings missing such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe corroded |7.1.2| | 1 |
| Windscreen damaged and affecting the driver`s view of the road cracked and badly scratched |3.2 |a| |ii|| | 1 |
| Windscreen wiper not operating over a large enough area to give an adequate view not working |8.2.1c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Seal |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded front to rear |5.2.6| | 1 |
| Nearside Rear Leaf spring anchor bracket insecure (5.3.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded bodysill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded bodysill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP AREA (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP AREA (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced TOP OF CHASSIS NEAR BODY BOLT ON POINTS (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced TOP OF CHASSIS NEAR BODY BOLT ON POINTS (6.1.1 (c) (i)) | 1 |
| Offside Stop lamp not working bulb may be in wrong way |1.2.1b| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp bad earth - all lights affected by all lights |4.2.3 |c|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis inside wheelarch |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside inner wing and floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel by shackle |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded center crossmembeer |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s outer chassis ,center |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s rear chassis inner |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s step |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill
|5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis above prop shaft |3.1.9| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength rear inner sill |5.3.6 |a| |i|| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering x member supporting engine mounts |6.1.A.1| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint outer |2.4.G.2| | 1 |
| Nearside Front Shock absorbers insecurely attached Upper mount |5.3.2 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch ; upper shock mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Cross-member |7.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced droplink mount (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front panel (5.3.6 (a) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage insecurely attached broken (5.3.3 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember @ rear shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember @ spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger @ shackle (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing : lower edge (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing @ top shockabsorber mounting area (two places) (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases front flexy section |7.1.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint ball joint creaking when steering turned !! |2.4.G.2| | 1 |
| Offside Rear Leaf spring fractured spring leaf displaced |2.4.B.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |under air filter box| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor pan/ inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor pan / inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member near rear spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member ___near rear spring shackle |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded cab step area |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded cab step area |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting inner valance / crossmember |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner valence / crossmember |6.6.6| | 1 |
| Rear Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Passenger`s seat with a defective structure |6.2.6 |a| |i|| | 1 |
| Offside Front Upper Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded chassis below servo |3.6.C.3| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill areas (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded step and sills |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint to rack |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor nr shock |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle and anchor areas |2.4.A.3| | 1 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded body cross member close to shock absorber mountings |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength joint of box section and inner sill adjacent to foremost leaf spring carrier (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section adjacent to bump stop near top shock absorber mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section adjacent to bump stop near top shock absorber mount (5.3.6 (a) (i)) | 1 |
| Steering system excessively rough verystiff (2.1.1 (a)) | 1 |
| Towbar safety device not operating correctly (6.1.6 (d)) | 1 |
| Prop shaft joint excessively worn both (6.1.7 (c) (i)) | 1 |
| Offside Rear Leaf spring eye defective |anchor| front eye cracked |2.4.B.1b| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both sides in engine bay (6.2.2 (d) (i)) | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour lense damaged. |1.1.A.3e| | 1 |
| Fuel tank insecure forward mounting strap excessively corroded. |7.2.1| | 1 |
| Nearside Rear brake drum contaminated by oil half shaft oil seal leaking |3.5.1h| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outter seal |2.4.A.3| | 1 |
| Central Prop shaft bearing excessively worn both central bearings worn |6.1.7 |b| |i|| | 1 |
| Nearside Inner Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Inner Front constant velocity joint gaiter missing |2.5.C.1a| | 1 |
| Brake pipe inadequately supported both main front to rear at front |3.6.B.1| | 1 |
| Offside Front Lower Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement Both rear D-Bushes. |2.4.G.2| | 1 |
| Anti-roll bar linkage damaged and seriously weakened O/S/R link broken |2.4.G.1| | 1 |
| Brake cable has wires broken and is significantly weakened N/S/R handbrake cable. |3.5.1b| | 1 |
| Electrical wiring damaged, likely to cause a short trailer socket wiring. |1.9.2b| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement trailing bush |2.4.G.2| | 1 |
| Offside Rear fog lamp not working driver`s side |1.3.2b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre out rigger |2.4.A.3| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded under door step |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Emissions not tested due to black smoke |7.4.B.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded back of understep |5.2.6| | 1 |
| Offside Rear Anti-roll bar linkage insecure bolt missing |2.4.G.1| | 1 |
| Nearside Front Steering rack gaiter insecure small end |2.2.D.2d| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded marked in yellow |5.2.6| | 1 |
| Nearside Rear Leaf spring main leaf fractured front eye snapped (5.3.1 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Body component corroded and likely to cause injury flat bed by drop side paneles indicated by chalk (6.2.1 (a) (i)) | 1 |
| Offside Body component corroded and likely to cause injury flat bed by drop side pannels indicated by chalk (6.2.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced close to seat mounting (inner step) (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch. welding detached. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near load valve. |6.1.1 |c| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Engine mount area. |6.1.B.2| | 1 |
| Offside Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded panel behind spring |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded panel behind spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan shock absorber |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm which is adjustable, locking device missing |2.4.G.1| | 1 |
| Nearside Towbar component fractured |6.6.1| | 1 |
| Offside Towbar component fractured |6.6.1| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 0.68 |8.2.2.2 |a|| | 1 |
| Offside Front Road wheel fractured |4.2.B.1a| | 1 |
| Nearside Front Road wheel fractured |4.2.B.1a| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center rear cross member |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded multiple holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded multiple holes |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded drivers step |5.2.6| | 1 |
| Nearside Rear Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Offside Rear Rear position lamp|s| not working Marker |1.1.A.3b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r and o/s/r outrigger corroded (6.1.1 (c) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i)) | 1 |
| Offside Seat belt affected by an insecure seat fixing bolt missing |5.2.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg end to rear panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg to rear panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis leg (1.1.21 (e) (i)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush & o/s to axle |2.4.G.2| | 1 |
| Nearside Front Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings inner & outer behind cab |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s rear chassis |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced panel |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s + n/s inner chassis under bonnet |6.1.1 |c| |i|| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Outline marker lamp not working 1 (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working 1 (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear most bush (2.4.G.2) | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear most bush (2.4.G.2) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger / spring area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger / spring area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / shock absorber area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / shock absorber area |5.3.6 |a| |i|| | 1 |
| Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 1 |
| Nearside Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s step to sill chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body outer rigger to b pillar. chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced b pillar chalked in yellow ( rear of step) (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front arches at strut top mounting areas. chalked in yellow (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s outer sill (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both front wheel arches chalked in yellow (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both front inner wings. chalked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sil |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sil |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Rear Suspension arm pin or bush excessively worn d bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Brake back plate|s| securing device loose |3.5.1j| | 1 |
| Nearside Front Body insecure and dangerous to other road users bumper insecure. |6.1.B.1b| | 1 |
| Nearside Front Front wheel bearing rough when rotated and excessive movement. |2.5.A.2| | 1 |
| Offside Rear Outer Front position lamp|s| not working |1.1.A.3b| | 1 |
| Fluid leaking continuously posing a serious risk to road safety Diesel from engine |8.4.1 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside front step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill x3 holes (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel (6.2.2 (d) (i)) | 1 |
| Nearside Radius arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings main members and outriggers |6.1.B.2| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings plate that was fitted is not seem welded |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassie rail |2.4.A.3| | 1 |
| Statutory seat belt missing buckle missing |5.1.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill more than 1 place |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner upper wheel arch more than 1 place front and back of arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan more than 1 place |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch more than 1 place |2.4.A.3| | 1 |
| Emissions not tested due to hole in exhaust |7.4.B.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch more than 1 place front and back of arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch more than 1 place |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded foremost outrigger both sides |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired foremost outrigger both sides |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis by fuel tank |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded foremost out rigger |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded cross member |5.2.6| | 1 |
| Centre Exhaust has a major leak of exhaust gases rear box |7.1.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Front Tie bar/rod rubber bush bonding deteriorated resulting in excessive movement track rod end |2.4.G.2| | 1 |
| Centre Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop mounting |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inne wing/ body |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis next to front spring hanger |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg / body marked in yellow |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area. Marked yellow (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate limit: 0.75 1/m Average Reading 2.78 1/m (8.2.2.2 (a)) | 1 |
| Service brake efficiency less than 50% of the required value Service brake efficiency 35% (1.2.2 (a) (ii)) | 1 |
| Parking brake efficiency below requirements Handbrake efficiency at 14% (1.4.2 (a) (i)) | 1 |
| Rear Prop shaft bearing excessively worn Marked in Yellow (6.1.7 (b) (i)) | 1 |
| Nearside Front Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Rear Rear fog lamp not working bulb fitted |1.3.2b| | 1 |
| Nearside Front Side repeater not working bulb fitted |1.4.A.2c| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill door step (7.1.1 (a) (i)) | 1 |
| Nearside Front Horn not working (7.7 (a)) | 1 |
| Front Horn does not function |6.2.1b| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded upper inner wing arch area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded upper inner wing and arch areas |2.4.A.3| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings behind cab |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings just behind cab |6.1.B.2| | 1 |
| Nearside Rear Outline marker lamp not working upper body lamp (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Outline marker lamp lens seriously defective lens missing (4.2.1 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wing 30cm strut top mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner arch at suspension turret holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Offside Rear Rear wheel bearing has excessive play and noisy |2.6.2| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated and noisy |2.6.1| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis/outrigger cut and opened for access |6.1.B.2| | 1 |
| Nearside Front Brake pipe inadequately clipped to flexi |3.6.B.1| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury flat bed door (6.2.1 (a) (i)) | 1 |
| Rear Body panel corroded and likely to cause injury flat bed rear door (6.2.1 (a) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired both rear drop side doors (6.2.2 (d) (ii)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired rear floor (6.2.2 (d) (ii)) | 1 |
| Offside Rear Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Fuel tank insecure bracket corroded (6.1.3 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin or bush excessively worn rear leaf spring bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Leaf spring anchor pin retaining device insecurely fitted |2.4.B.3b| | 1 |
| Nearside Front Coil spring mounting corroded and seriously weakened wheelbox (5.3.1 (b) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheelbox (5.3.6 (a) (i)) | 1 |
| Centre Front Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Offside Rear Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Upper Anti-roll bar insecure |2.4.G.1| | 1 |
| Offside Front Upper Anti-roll bar insecure |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER STEP |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL UNDER DOOR |6.1.B.2| | 1 |
| Offside Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings REAR SILL |6.1.B.2| | 1 |
| Centre Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger/undersill |2.4.A.3| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened chassic rail |2.4.B.6d| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened chassic rail
|2.4.B.6d| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting rear chassis rail and rear cross member |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill marked in yellow |2.4.A.3| | 1 |
| Headlamp not working on main beam offside |1.7.5a| | 1 |
| Anti-roll bar linkage insecure nearside rear link lower mounting |2.4.G.1| | 1 |
| Offside Rear Lower Anti-roll bar locating pin locking device missing |2.4.G.3b| | 1 |
| Front Vehicle structure has a fracture which adversely affects braking or steering cross member |6.1.A.1| | 1 |
| Centre Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis support |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded load area |2.4.A.3| | 1 |
| Rear Body has a sharp edge caused by corrosion panel all across |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Front Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Rear Braking system leaking Brake load sensing valve |3.6.A.1| | 1 |
| Service brake indicates brake judder |3.7.D.1| | 1 |
| Seat belt webbing significantly weakened drivers |7.1.2 |b| |ii|| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture fouling power steering pipe |1.1.11 |a|| | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture not in clips |1.1.11 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounts |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected due to excessive corrosion around rear leaf springs |5.3.6 |a| |ii|| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb loose (4.1.2 (c)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above axle (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above axle (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis meets rear cross member (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced strut top (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced strut top (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in engine bay (marked in yellow) (6.1.1 (c) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both rear spring mounts (marked in yellow) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger and shocker mount (marked in yellow) (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre box (6.1.2 (a)) | 1 |
| Emissions not tested exhaust blow (8.2.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded innersill |2.4.A.3| | 1 |
| Nearside Rear Lower Fluid suspension unit leaking |2.4.D.2| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect dip |1.8.A.1b| | 1 |
| Nearside Inner Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near suspension mount |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting hole in sill (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced siep |7.1.1 |a| |i|| | 1 |
| Offside Rear Brake pipe inadequately supported cvross |3.6.B.1| | 1 |
| Nearside Brake valve has an excessive discharge of oil |3.6.E.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front chassis |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill to step |2.4.A.3| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember were marked |6.1.1 |c| |i|| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step sill rusted |6.2.2 |d| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to back (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill front to back (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced spring carrier (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring missing and directional control affected separating (5.3.1 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower panel close to rear leaf spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower panel close to rear leaf spring mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Body panel damaged and likely to cause injury lens sharp edge |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded doorstep |5.2.6| | 1 |
| Fuel system component leaking excessively or a risk of fire at fuel filter (6.1.3 (b) (ii)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rearmost bush (5.3.4 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Exhaust tail pipe (6.1.2 (a)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step area (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassia outrigger area & floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Steering arm deformed |2.1.3 |c| |i|| | 1 |
| Nearside Front Steering arm deformed |2.1.3 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced x3 (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced x3 (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis area (7.1.1 (a) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner arch - chassis leg |6.2.2 |d| |i|| | 1 |
| Nearside Rear Lower Sub-frame severely distorted |2.4.G.1| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Both |4.1.2 |a|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Centre Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg. Shocker mount. |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut towers. |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut towers. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner arch/ wing |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill under door |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner arch / wing |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded bottom of wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill in front of rear wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Behind wheel arch |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light LENS IS BROKEN AND SHOWING WHITE LIGHT TO REAR |4.5.4 |a|| | 1 |
| Offside Rear Lower Anti-roll bar linkage insecurely attached LINKAGE BOLT IS INSECURE |5.3.3 |a| |i|| | 1 |
| Rear Prop shaft bearing excessively worn RUBBER MOUNTING IS BROKEN |6.1.7 |b| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s + o/s front wheel arches |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded n/s + o/s chassis |2.4.A.3| | 1 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings engine bay |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both ends |5.3.6 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner and outer sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under wing |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sills and crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sills and crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassies |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassies |2.4.A.3| | 1 |
| Offside Rear position lamp|s| not working and nearside |1.1.A.3b| | 1 |
| Offside Stop lamp not working and nearside |1.2.1b| | 1 |
| Offside Direction indicators not working and nearside rear |1.4.A.2c| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside sills |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside rear inner sills |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside rear outrigger |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner chassis by gearbox |2.4.A.3| | 1 |
| Offside Front Engine mounting bracket fractured |6.1.8 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near leaf spring eye bolt |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near leaf spring eye bolt |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded and nearside rear chassis |2.4.A.3| | 1 |
| Nearside Rear Valve stem seriously damaged |4.1.C.1e| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle mount {out rigger} (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar which is adjustable, loose in adjustment threads |2.4.G.1| | 1 |
| Offside Front Upper Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Offside Front Upper Front position lamp|s| not working cab mount |1.1.A.3b| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour lamp faded |1.1.A.3e| | 1 |
| Offside Rear Stop lamp emits other than a steady red light lamp faded |1.2.1e| | 1 |
| Offside Rear Rear fog lamp emits a light other than red lamp faded |1.3.2e| | 1 |
| Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill holed |6.1.B.2| | 1 |
| All position lamps not working rears not tested |4.2.1 |a|| | 1 |
| Other passenger door cannot be opened from outside the vehicle both rear |6.2.3 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cabstep |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sills various places |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill inside door |7.1.1 |a| |i|| | 1 |
| Dropside insecure |6.2.1 |a| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab step to sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired rear frame |6.2.2 |d| |ii|| | 1 |
| Offside Front Drivers door cannot be opened from outside the vehicle sharp edges (6.2.3 (a)) | 1 |
| Rear Seat belt missing all (7.1.2 (a)) | 1 |
| Power steering pipe/hose modification unsafe (2.1.5 (f) (i)) | 1 |
| Rear Body has an unsafe modification floor boards insecure and missing (6.2.1 (d) (i)) | 1 |
| Front Headlamp insecure both |4.1.1 |c|| | 1 |
| Braking system leaking Front to rear brake pipe |3.6.A.1| | 1 |
| Central Stop lamp insecure |1.2.1a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Front and rear sill holed |5.2.6| | 1 |
| Nearside Entrance/exit step damaged to the extent that it is likely to be a trip hazard or cause injury. Side door floor mounding broken |6.1.E.1| | 1 |
| Front Body insecure and dangerous to other road users Bumper insecure |6.1.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded In??er wing holed |2.4.A.3| | 1 |
| Nearside Rear Passenger door does not latch securely closed |6.5.11b| | 1 |
| Brake cable locking device insecure |3.5.1j| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing holed |5.3.6 |a| |i|| | 1 |
| Centre Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Front Position lamp not working x2 |4.2.1 |a|| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded front subframe |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring front mounting point |2.4.A.3| | 1 |
| Road wheel more than one fixing missing ONE FROM EACH WHEEL |5.2.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected MARKED |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected MARKED |5.3.6 |a| |ii|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength MARKED |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor /n/s/r top shock absorber mounting |6.1.B.2| | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seals (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill has rust hole 30cm of axel mount |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer inner sills |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both inner sills |6.1.A.1| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both leaf spring mount area |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front leaf spring mount area |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Inner Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Fluid suspension has no suspension movement |2.4.D.5| | 1 |
| Offside Rear Fluid suspension has no suspension movement |2.4.D.5| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under step area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under step area |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded next to and behind spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded next to and behind spring hanger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front of spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front of spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill end and outer sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing 2 places |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch in 2 places |2.4.A.3| | 1 |
| Body component damaged and likely to cause injury sliding door |6.2.1 |a| |i|| | 1 |
| Hydraulic fluid leaking excessively rear load sensing valve leaking |8.4.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded side pocket |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer pocket |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door pillar |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired door pillar |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired out rigger |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step/cab floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step/ chassis rigger |5.2.6| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded chassis rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis has various holes |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner/outer sill |6.1.B.2| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHOLE UNDER SIDE (6.1.1 (c) (i)) | 1 |
| Central Rear Floor excessively deteriorated X6 HOLES IN FLOOR (6.2.4 (a) (i)) | 1 |
| Central Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILLS (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUUTER SILLS (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced DOOR STEP (6.1.1 (c) (i)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILLS (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILLS (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DOOR STEP (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEELS ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDER AIR BOX (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEELS ARCH (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch, rear of leaf spring |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings gearbox mount area |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mount area |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sills |6.1.B.2| | 1 |
| Offside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement drop link |2.4.G.2| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp position/indicator |4.2.3 |c|| | 1 |
| Nearside Rear Stop lamp|s| adversely affected by the operation of another lamp stop lamp/indicator |4.3.3 |b|| | 1 |
| Nearside Rear Rear fog lamp adversely affected by the operation of another lamp fog/indicator |4.5.4 |b|| | 1 |
| Outline marker lamp missing both rear outline markers missing |4.2.1 |a|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x1 |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x4 |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x1 |7.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced of chassis |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced of chassis |6.1.1 |c| |i|| | 1 |
| Prop shaft flexible coupling excessively deteriorated 1st prop shaft mounting |6.1.7 |d| |i|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn `D` bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn `D` bush |5.3.4 |a| |i|| | 1 |
| Emissions not tested due to excessive black smoke |8.2.2.2 |e|| | 1 |
| Power steering pipe|s| or hose|s| leaking pipe nearside |2.3.3b| | 1 |
| Power steering malfunctioning locking when driving and manovering |2.3.3a| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner upper chassis. |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage side door handle broken, causing sharp edge |6.1.C.1| | 1 |
| Brake load sensing valve defective and function impaired bracket bent |3.6.E.3| | 1 |
| Rear Exhaust system not adequately supported hanging rubber split |7.1.1| | 1 |
| Offside Front Lower Steering column retaining device missing |2.1.6| | 1 |
| Rear Braking system leaking pipe corroded |3.6.A.1| | 1 |
| Nearside Rear Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Sill step and inner panel |5.2.6| | 1 |
| Nearside Bonded suspension unit deteriorated and cannot function as intended Front wishbone rear bushe |2.4.F.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering At n/s rear spring hanger |6.1.A.1| | 1 |
| Body insecure and dangerous to other road users Both front bumper supports |6.1.B.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner Wheel arch. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Swinging shackle out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill by front spring eye. |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion side gate |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill/rear of cab |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill/rear of cab |7.1.1 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting area |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded on chassis rail |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS REAR OF SPRING |2.4.A.3| | 1 |
| Offside Rear Direction indicators incorrect colour lense damaged |1.4.A.2f| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer chassis |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under arch and outrigger |2.4.A.3| | 1 |
| Offside Rear Position lamp missing |4.2.1 |a|| | 1 |
| Nearside Front Body mounting fixings insecure b pillar |6.2.2 |c| |i|| | 1 |
| Nearside Inner Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Gas suspension unit totally deflated |2.4.D.1a| | 1 |
| Leaf spring damaged and permanently distorted |2.4.B.1a| | 1 |
| Steering column universal joint locking device missing nut missing lower uj (2.1.3 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under doorstep mounting area holed, complete |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner to outer sill holed and distorted |2.4.A.3| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired linkage seized (1.1.17 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced BACK OF CAB AREA (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREA CORRODED IN 2 PLACES (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced CORRODED,INNER BOX SECTION AREA (7.1.1 (a) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp INDICATOR STAYS ON WITH ALL LIGHTS ON (4.4.3 (b)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting IN WHEEL ARCH (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer brake disc modified and seriously weakened |3.5.1n| | 1 |
| Offside Front Outer brake disc modified and seriously weakened |3.5.1n| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Offside step area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Near side step area |5.2.6| | 1 |
| Central Prop shaft bearing housing fractured |6.1.7 |f| |i|| | 1 |
| Offside Front Fuel tank insecure |7.2.1| | 1 |
| Offside Rear Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis - under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis - near alternator |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis around spring anchor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis around spring anchor |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind strut |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis near brake load sensing valve |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower rear panel near rear leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mid inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mid inner sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower,inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Body panel damaged and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Nearside Rear Lower Body panel corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases broken (6.1.2 (a)) | 1 |
| Emissions not tested due to broken exhaust unable to get a accurate result (8.2.2.2 (e)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury outer sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury outer sill (6.2.1 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion nearside and offside front wings |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring fixing (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring fixing (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sub frame fixing (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sub frame fixing (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring fixing (5.3.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded CHASISS |2.4.A.3| | 1 |
| Front suspension has excessive play in a lower suspension ball joint both |2.5.B.1a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner sill |2.4.A.3| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect water in lamp |1.8.A.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section rotten and near osf top mount |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings foot step |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner front to rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to spring mountain point |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded lower sill |by mudguard| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded middle out rigger by front most part of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by rear most part of spring |multiple| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by rear spring |2.4.A.3| | 1 |
| Front Anti-roll bar pin or bush excessively worn both "D" bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded+holed (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill step |6.1.B.2| | 1 |
| Offside Front Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Inner Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under arch area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under arch area (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting doorstep area (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x 2 places (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under arch area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Other passenger door cannot be opened from outside the vehicle bonnet not opening to allow full inspection (6.2.3 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/strutt mounting area (5.3.6 (a) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated x2 (6.1.7 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch by top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn fixing bolt fouling body (5.3.4 (a) (i)) | 1 |
| Offside Rear Stop lamp emits other than a steady red light lense broken |1.2.1e| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, inner side marked in blue spray |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing. |6.1.1 |c| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing. |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion WHEEL ARCH |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by damage BUMPER END MISSING |6.1.C.1| | 1 |
| Offside Rear position lamp|s| missing MISSING |1.1.A.3a| | 1 |
| Brake performance not tested fluid leak (1.2.1 (g)) | 1 |
| Nearside Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor and side panels |3 places.| |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor and side panel and seat mount. |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill holed. |5.2.6| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush front leaf spring bush worn. |2.4.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides chassis under wheel archs |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis adove axel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of wheel |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail mounting |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor both sides |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both sides leaf springs |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front mounting |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/wing (5.3.6 (a) (i)) | 1 |
| Emissions not tested major oil leak (8.2.2.2 (e)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength 2 areas. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner archx2 |2.4.A.3| | 1 |
| Emissions not tested excessive smoke. (8.2.2.2 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded lower cross member to chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front jacking point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner arch incomplete repair |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch to rear floor |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step to sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
| Headlamp not working on main beam Both sides |1.7.5a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Rear inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Rear inner sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Rear inner wheel arch area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sil |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i|| | 1 |
| Front Fuel pipe leaking Injectors |6.1.3 |b| |i|| | 1 |
| Front Speedometer clearly inoperative |7.8 |b| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step area |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area |6.1.1 |c| |i|| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 1.19 plate limit |8.2.2.2 |a|| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| in rack |2.2.A.1b| | 1 |
| Prop shaft bearing excessively worn 2nd bearing, marked (6.1.7 (b) (i)) | 1 |
| Offside Stop lamp not working with lights on |1.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassi out rigger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By shocker (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By shocker (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded By compensator valve (1.1.21 (e) (i)) | 1 |
| Power steering pipe/hose leaking to rack (2.1.5 (a)) | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view driver |3.3 |b| |ii|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp side light |4.4.3 |b|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp stop light |4.4.3 |b|| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp fog light |4.4.3 |b|| | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split |6.1.7 |g| |ii|| | 1 |
| Nearside Front Body component damaged and likely to cause injury bumper/body panel |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear end |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear end |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch need welding (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch need welding (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch need welding (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill need welding front and rear (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step corroded & holed |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at spring mount |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bounet |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n,s,r and o,s,r next to tow bar mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis under bonnet area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow |6.1.B.2| | 1 |
| Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom |2.2.C.1c| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded at chassis |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Inner Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Centre Rear Towbar locking device inadequate |6.6.3b| | 1 |
| Offside Rear Upper Leaf spring shackle bracket insecure shackle bolt loose (5.3.1 (a) (i)) | 1 |
| Nearside Body mounting fixings missing body x2 bolts missing (6.2.2 (c) (i)) | 1 |
| Offside Body mounting fixings missing body bolts x2 missing (6.2.2 (c) (i)) | 1 |
| Offside Body mounting fixings insecure body bolts x3 insecure (6.2.2 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step /underside sill / cab floor areas. |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back
shackle & surrounding areas |2.4.A.3| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release faulty |5.2.5a| | 1 |
| Rear Fuel tank insecure tank mount strap rusted out |7.2.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassie to bulckhead |2.4.A.3| | 1 |
| Front position lamp|s| not working both side lights |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner & outer sill sections |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner & outer sill sections |5.2.6| | 1 |
| Nearside Rear Anti-roll bar fractured |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member next to spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring swinging shackle |5.3.6 |a| |i|| | 1 |
| Side repeater not working both sides |1.4.A.2c| | 1 |
| Nearside Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear reflector not facing the rear |1.5.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear ov spring |2.4.A.3| | 1 |
| Nearside Rear Lower Torque/reaction arm has a deteriorated rubber bush resulting in excessive movement |2.4.G.2| | 1 |
| Prop shaft bearing excessively worn both bearings excessively worn |6.1.7 |b| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases rear sections of exhaust missing |6.1.2 |a|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake cable adjuster mounting area |3.1.9| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis next to tank |5.2.6| | 1 |
| Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn into hub |5.3.4 |a| |i|| | 1 |
| Offside Front Shock absorbers insecurely attached Movement between hub and shock (5.3.2 (a) (i)) | 1 |
| Nearside Rear Hazard warning lamps inoperative when brake light on |1.4.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner + outer sills |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill outer |2.4.A.3| | 1 |
| Offside Headlamp aim beam image obviously incorrect lens dirty |1.8.A.1b| | 1 |
| Offside Track rod end ball pin shank loose inner rack arm |2.2.B.1c| | 1 |
| Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture inner wheel arch area (1.1.11 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section, holed/filled repair carried out (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle /brake load sensing valve prescribed mounting area (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle - evidence of filler used to repair chassis ,filler visible through lower chassis holes (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Position lamp not working upper cab light |4.2.1 |a|| | 1 |
| Towbar with an unsafe modification to primary components tow bar damaged bent and twisted downwards |6.1.6 |g| |ii|| | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member under tipper body |6.1.1 |c| |ii|| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering under sill and step |6.1.1 |c| |ii|| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering outer sill holed |6.1.1 |c| |ii|| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill behind door has two holes |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and floor has holes in it |6.1.B.2| | 1 |
| Nearside Rear Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement axle bush |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement axle bush |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecure link bar loose on roll bar |2.4.G.1| | 1 |
| Offside Rear Lower Anti-roll bar linkage insecure link bar loose on roll bar |2.4.G.1| | 1 |
| Nearside Front Track rod end ball joint has excessive play and gator split |2.2.B.1f| | 1 |
| Offside Front Track rod end ball joint has excessive play and gator split |2.2.B.1f| | 1 |
| Offside Upper Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Upper Front position lamp|s| not working cab light |1.1.A.3b| | 1 |
| Anti-roll bar worn and seriously weakened at both ends worn where link pins bolt goes through |2.4.G.1| | 1 |
| Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced step area |6.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced step area |6.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by shockabsorber top mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill under step |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Emissions not tested Excessive smoke when engine revved. (8.2.2.2 (e)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near front leaf spring area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring mounting area inner sill both sides (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to rear inner sill (6.2.2 (d) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting along the rear marked yellow |6.6.6| | 1 |
| Nearside Vehicle structure excessively corroded within 30cm of towbar mounting chassis marked yellow |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded all of the body mount marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount all marked yellow |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch near the top marked yellow |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch on the chassis marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength /rear spring mount area |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above rear axle floor both sides |5.3.6 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top and bottam of chassis |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded lower door step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill back plate |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill back plate |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill all the way along |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis behind wheel all the way long |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch in various place near strut mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch in various places near strut mount |2.4.A.3| | 1 |
| Offside Inner Front Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension arm locating pin retaining device missing |2.4.G.3b| | 1 |
| Offside Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Rear Leaf spring fractured broken at rear mount (5.3.1 (b) (i)) | 1 |
| Rear Exhaust system insecure exhaust bracket snapped and likely to fall off (6.1.2 (a)) | 1 |
| Fuel tank insecure mounting strap snapped (6.1.3 (a) (i)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury light cluster (6.2.1 (a) (i)) | 1 |
| Power steering component leaking from rack |2.1.5 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount, outrigger area |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine black |8.2.2.2 |b|| | 1 |
| Power steering component misaligned drive belt not fully on pulley |2.1.5 |e| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sills |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sills |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step marked in yellow |6.1.1 |c| |i|| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow |6.1.1 |c| |i|| | 1 |
| Nearside Front Brake hose leaking Hose too caliper joint/Washers |3.6.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer door step |marked in yellow| |7.1.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring anchor pin or bush likely to become detached front |5.3.4 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / inner wheel arch |marked in yellow| |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing /wheel arch |marked in yellow| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger mount |marked in yellow| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger mount |marked in yellow| |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Statutory seat belt missing |5.1.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back bumper and back quarter |6.1.B.2| | 1 |
| Nearside Rear Headlamp insecure back light |1.7.3| | 1 |
| Offside Rear Headlamp insecure back light |1.7.3| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure forward support strap excessively corroded (6.1.3 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring mounting area rotten (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mounting 3 places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mounting 2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis |shackle| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |shackle| |2.4.A.3| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Torsion bar attachment bracket loose |2.4.E.4a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer chassis |2.4.A.3| | 1 |
| Nearside Lower Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded next to spring mounting cross section. |2.4.A.3| | 1 |
| Offside Front Lower All position lamps not working |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength chassis |2.4.A.3| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis above axle |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis above axle |6.1.1 |c| |i|| | 1 |
| Steering component damaged and unserviceable |2.2.C.1d| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Position lamp not working |4.2.1 |a|| | 1 |
| Rear Exhaust silencer insecure missing |8.1.1 |b| |i|| | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced recovery bed frame at rear corroded |6.1.1 |a| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner wing (2.1.2 (e) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Front Seat belt stitching not secure |5.2.2b| | 1 |
| Nearside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill step |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Front Inner Front position lamp|s| not working |1.1.A.3b| | 1 |
| Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth |3.1.5| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Fuel system component leaking excessively or a risk of fire fuel pump area |6.1.3 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Near rear spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Near strut mount |2.4.A.3| | 1 |
| Nearside Lower Outline marker lamp missing center |4.2.1 |a|| | 1 |
| Offside Rear Upper Outline marker lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Front Brake hose twisted |found during steering lock to lock check| both |2.2.D.2b| | 1 |
| Rear Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked by chalk |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas - marked with chalk |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas - marked with chalk |5.3.6 |a| |i|| | 1 |
| Emissions not tested due to major oil leak |8.2.2.2 |e|| | 1 |
| Stop lamp adversely affected by the operation of another lamp side lights and dash lights come on with stop lights |1.2.1f| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Above axle |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber area |2.4.A.3| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded Inside wheel arch |2.4.A.3| | 1 |
| Obligatory mirror seriously obscured affecting the rear view o/s and n/s |8.1.2a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s inner and outer sills |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s chassis / floor rear panel |6.1.B.2| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement o/s/f and n/s/f |2.4.G.2| | 1 |
| Nearside Inner Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Nearside Body has a sharp edge caused by damage Mirror back missing |6.1.C.1| | 1 |
| Offside Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill at outrigger |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill at outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch corroded |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases rear box seam |7.1.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step/sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step/sill |5.2.6| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body in several places and by tipping points |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts. chassis/floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear mounts. chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount. floor |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded Centre sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chasis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chasis |2.4.A.3| | 1 |
| Nearside Front Steering pivot point has excessive play inner joint |2.2.B.1g| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis x2 leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis x2 leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded boot floor to chassis [shock mount] |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nr wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front section wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis section |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Rail (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/step corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/step corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Road wheel fixing missing nut missing |5.2.1 |a| |i|| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative brake compensator |1.1.17 |c| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor/inner arch |5.3.6 |a| |i|| | 1 |
| Central Subframe mounting prescribed area excessively corroded significantly reducing structural strength n/s chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Outline marker lamp not working side marker |4.2.1 |a|| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember badly corroded and holed n/s, o/s, and centre |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember and 1/4 sill and inner sill badly corroded and holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember amd 1/4 sill and inner sill badly corroded and holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount area corroded and holed sill and inner sill |2.4.A.3| | 1 |
| Front Body has a sharp edge caused by corrosion both front wings and bumper insecure |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis end plate |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis end plate |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis above leaf spring |2.4.A.3| | 1 |
| Centre Rear Electrical wiring damaged and bare wires exposed |1.9.2c| | 1 |
| Adjustable towbar locating pin insecure |6.6.5a| | 1 |
| Brake performance not tested due to corrosion at prescribed areas |3.7.A.1| | 1 |
| Nearside Front Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS HOLED & CORRODED, near inner sill |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S,N/S OUTER CHASSIS CORRODED, near inner wheel arches |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded SILL INNER/OUTER HOLED & CORRODED |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2x INNER SILLS HOLED & CORRODED |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is severely distorted O/S,N/S SILLS DAMAGED |2.4.A.3| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i|| | 1 |
| Offside Front Upper Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor corroded and holed (Seat runner) (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill corroded and holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner wing corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner wing corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Corroded and holed around rear shocker and leaf spring hangar (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Corroded and holed around rear shocker and leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis above centre of spring (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis above centre of spring (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill panel |5.3.6 |a| |i|| | 1 |
| Front Towbar component insecure |6.6.1| | 1 |
| Rear Lower Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.2| | 1 |
| Nearside Front Wheel bolt|s| missing wheel bearing hub |4.2.A.1e| | 1 |
| Nearside Front Wheel bolt|s| missing hub to disc |4.2.A.1e| | 1 |
| Nearside Rear Anti-roll bar insecurely attached d bush |5.3.3 |a| |i|| | 1 |
| Offside Rear Anti-roll bar insecurely attached d bush |5.3.3 |a| |i|| | 1 |
| Offside Front Inner Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Front suspension has excessive movement at a suspension ball joint wishbone |2.5.A.1c| | 1 |
| Nearside Front suspension has excessive movement at a wishbone pin or bush rear bush deteriorate between metal and rubber |2.5.A.1c| | 1 |
| Offside Front Ball joint has excessive play track rod end
|2.2.B.1f| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear quarter (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step (6.1.1 (c) (i)) | 1 |
| Rear Brake prescribed area is excessively corroded rear cross member near flex brake mounting (1.1.21 (e) (i)) | 1 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Engine mounting |6.1.B.2| | 1 |
| Nearside Rear brake disc contaminated by brake fluid |3.5.1h| | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases silencer boxes |7.1.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis member front of wheel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under arch flitch plate |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded sill under step |2.4.A.3| | 1 |
| Nearside Front Outer Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Centre Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Offside Rear Leaf spring slipper cracked |2.4.B.5| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near brake load valve |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS |6.1.1 |c| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to rear inner sill |6.1.B.2| | 1 |
| Rear Anti-roll bar worn and seriously weakened n/s link arm end |2.4.G.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x1 |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outer x1 |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x4 |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x2 |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x3 |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill arch (5.3.6 (a) (i)) | 1 |
| Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc both nsf and osf |2.5.C.1a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near sill underneath |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear cross member behind bumper |6.1.B.2| | 1 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt Front bottom ball joint dust cover (5.3.4 (b) (ii)) | 1 |
| Nearside Outer Front Road wheel badly damaged |4.2.A.1a| | 1 |
| Offside Rear Road wheel has a welding defect (5.2.2 (a)) | 1 |
| Towbar component defective |6.1.6 |a|| | 1 |
| Nearside Front Steering wheel rim fractured |2.2.1 |c| |i|| | 1 |
| Offside Rear coil spring repaired by welding |2.4.C.1c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Two places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Two places |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/chassis in two places |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/chassis in two places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail inside and outside |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail inside and outside |2.4.A.3| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger near spring hanger (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch near spring (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger near spring hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step/sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear bump stop mountings |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S inner sill panel corroded in multiple locations |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S inner and outer sill panel corroded in multiple locations |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front to back |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear spring mounts |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Side step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Side step (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Side step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Middle of the sill |6.1.B.2| | 1 |
| Offside Rear Body has a projection caused by corrosion step |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by damage bumper insecure |6.1.C.1| | 1 |
| Central Front Bonnet primary retaining device excessively deteriorated |3.1 |c|| | 1 |
| Central Front Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side step |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill/step |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/step |6.1.1 |c| |i|| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cab |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |at exhaust silencer |6.1.1 |c| |i|| | 1 |
| Central Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rearward bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting nut missing Nut loose |2.4.G.1| | 1 |
| Front Prop shaft flexible coupling excessively deteriorated x2 |6.1.7 |d| |i|| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected Chassis crossmember |1.1.21 |e| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint poss anti roll ball |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Horn emits two or more alternating tones additional hazard warning switch operates horn |1.6.2d| | 1 |
| Offside Front Brake disc insecure bolt missing (1.1.14 (a) (ii)) | 1 |
| Centre Front Driver`s view restricted by object |6.9.1a| | 1 |
| Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill holed along in places |5.2.6| | 1 |
| Front Body mounting fixings insecure rear body bolts loose both sides |6.2.2 |c| |i|| | 1 |
| Front Headlamp levelling device inoperative both sides |4.1.5 |a|| | 1 |
| Nearside Rear Upper All outline marker lamps not working led broken |4.2.1 |a|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross members holed all 3 |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step x2 |6.1.1 |c| |i|| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance wrong bulb fitted |1.1.A.3d| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Rear Anti-roll bar locating pin locking device not properly locked bolt loose |2.4.G.3b| | 1 |
| Nearside Front Inner Suspension component corroded and seriously weakened wheel arch (5.3.3 (b) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed in engine bay (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed in engine bay (6.1.1 (c) (i)) | 1 |
| Rear position lamp|s| not working all marker lights |1.1.A.3b| | 1 |
| Nearside Front Exhaust emissions likely to be affected by an induction leak egr pipe (8.2.2.1 (b)) | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d rubber |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d rubber |2.4.G.2| | 1 |
| Offside Power steering component leaking gaiter (2.1.5 (a)) | 1 |
| Front Service brake excessively binding both (1.2.1 (f)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring mount area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring mount area |6.1.B.2| | 1 |
| Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear valance area |6.1.B.2| | 1 |
| Offside Rear Direction indicator incorrect colour Llight unit broken |1.4.A.2f| | 1 |
| Nearside Front Inner Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Inner Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch inner wing |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outtriger |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded quater sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded backing sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded backing sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded quarter |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail/ bump stop (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail above bump stop |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Electrical wiring insecure front to rear underside |1.9.2a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind seat (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sil (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis just rear of shock mntg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front of road spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear of road spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of rear road spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of rear road spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded fixing of top shock absorber |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded fixing of top shock absorber |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering step mount |6.1.A.1| | 1 |
| Nearside Rear Outer Body has a projection caused by corrosion sil |6.1.C.1| | 1 |
| Front Headlamp not working on dipped beam Bothside (4.1.1 (a) (ii)) | 1 |
| Rear Stop lamp(s) adversely affected by the operation of another lamp Bothsides (4.3.3 (b)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp Bothsides (4.4.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake pipe kinked axle |3.6.B.2b| | 1 |
| Nearside Rear Leaf spring fractured Spring eye anchor end |2.4.B.1a| | 1 |
| Offside Rear Leaf spring fractured Spring eye anchor end |2.4.B.1a| | 1 |
| Brake performance not tested Defective rear spring eyes |3.7.A.1| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear crossmember |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner body sil |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer body sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch / wing |2.4.A.3| | 1 |
| Nearside Rear Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing |2.5.B.3a| | 1 |
| Nearside Service brake lagging in operation |1.2.1 |d|| | 1 |
| Emissions not tested Engine rattle/Diesel knock |8.2.2.2 |e|| | 1 |
| Nearside Axle beam distorted |2.5.A.5b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step/sill panel |5.2.6| | 1 |
| Front Suspension arm has excessive play in a pin/bush |2.4.G.3| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting support to chassis (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner seal (6.2.2 (d) (i)) | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt fitted clip |6.1.7 |g| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch inner wing area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded step area |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/inner sill area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mountings/step and inner sill area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring mount area| inner and outer sills| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded font leaf spring mount area| inner and outer sills| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mount area all round corrosion |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount area inner sill alround |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and o/s/r inner chassis corrosion|spare wheel | mount area |2.4.A.3| | 1 |
| Rear Exhaust tailpipe positioned so that fumes are likely to enter the passenger compartment |7.1.5| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring |both sides| |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower arm bushes |both sides| |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear leaf spring rear mounts |6.1.B.2| | 1 |
| Offside Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced step |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by brake compensator |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted front area of spring |2.4.A.3| | 1 |
| Front Front position lamp|s| not working both not working |1.1.A.3b| | 1 |
| Offside Inner Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn bottem arm rear bush. |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill area (inner and outer) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill area (inner and outer) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (bump stop) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (bump stop) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Panhard rod rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front position lamp|s| not working both sides upper |1.1.A.3b| | 1 |
| Offside Rear Body has a sharp edge caused by damage lenz hanging off |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill 2 areas chalked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded to rear of cab area chalked |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded to rear of cab area chalked |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill 2 areas chalked |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis below brake fluid reservoir |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sills 2 areas chalked |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis near inner step |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush drop link |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis near step |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember near drop link mounting areas chalked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember near drop link mounting areas chalked |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage insecure drop link |2.4.G.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch area |2.4.A.3| | 1 |
| Offside Rear Tie bar/rod attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Hand operated control valve malfunctioning |3.2.2c| | 1 |
| Nearside Front Shock absorber has an excessively worn bush top |2.7.4| | 1 |
| Offside Rear fog lamp obviously incorrectly positioned INCORRECT BULB FITTED |1.3.2a| | 1 |
| Offside Stop lamp obviously incorrectly positioned INCORRECT BULB FITTED |1.2.1a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded DOOR STEP |5.2.6| | 1 |
| Body has a sharp edge caused by corrosion nearside mirror |6.1.C.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger behind wheel |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of wheel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of wheel outrigger |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill & base of foot well |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine bay |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill + inner sill/doorstep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill + inner sill / doorstep |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded Outer & inner sill and door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer step (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab (7.1.1 (a) (i)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced cab (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Outer Steering rack insecure |2.2.B.1a| | 1 |
| Offside Front Leaf spring cracked front bush |2.4.B.1a| | 1 |
| Rear Exhaust system not adequately supported rubber hanger broken |7.1.1| | 1 |
| Nearside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering outer chassis |6.1.A.1| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering outer chassis |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid Load sensing valve |1.1.16 |b| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill throughout holed (6.1.1 (c) (i)) | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks Wiring under bonnet going all around the engine bay is insecure and likely to cause fire, (4.11 (c) (iii)) | 1 |
| Offside Front Body has a projection caused by damage wing/bumper |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded within prescribed area of the seat base mounting point |step/sill| |5.2.6| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means Temporary type fitted |7.2.4b| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint pipes to steering rack |2.3.3b| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting likely to become detached Bolts loose (5.3.3 (a) (ii)) | 1 |
| Stop lamp obviously incorrectly positioned |1.2.1a| | 1 |
| Front Steering damper leaking oil |2.2.C.1f| | 1 |
| Front Statutory seat belt missing centre |5.1.1| | 1 |
| Offside Front Side repeater flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Offside Front position lamp|s| not working centre |1.1.A.3b| | 1 |
| Offside Front Lower brake caliper securing device missing |3.5.1j| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis middle rail |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis middle rail |6.1.B.2| | 1 |
| Towbar component insecure Rear crosmember corroded through |6.6.1| | 1 |
| Offside Front Front suspension retaining device ineffective One inner hub retaining bolt not secure |2.5.A.4| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Crossmember |6.6.6| | 1 |
| Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Both sides of vehicle |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outter sill and inner box section |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Marked with yellow chalk,both sides of chassis rail |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Inner and Outter sills both sides of vehicle |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked yellow (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked yellow (6.2.2 (d) (i)) | 1 |
| Nearside Rear Brake cable has restricted free movement rubbing on wheel rim |3.5.1k| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Nearside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired inner sill and step (6.2.2 (d) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and step all marked up (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and step all marked up (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked up (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked up (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing corroded sharp edges (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing corroded sharp edges (6.1.1 (c) (i)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength propshaft mount (5.3.6 (a) (i)) | 1 |
| Power steering component insecure RESERVOIR (2.1.5 (d) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced BEHIND CAB (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced BEHIND CAB (6.1.1 (a) (i)) | 1 |
| Nearside Inner Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Body panel corroded and likely to cause injury front wing |6.2.1 |a| |i|| | 1 |
| Front Seat belt buckle missing middle buckle |7.1.2 |d|| | 1 |
| Nearside Outer Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Centre Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Nearside Front Lower Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Lower Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Fuel system component leaking filter assembly |7.2.3| | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor/inner wing (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and box |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear leaf spring mounts |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear leaf spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Wheel arch |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired step/sill |6.2.2 |d| |ii|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step/sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wing section |6.2.2 |d| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing top in engine bay |6.2.2 |d| |i|| | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wing top in engine bay |6.2.2 |d| |ii|| | 1 |
| Offside Front Upper Position lamp not working on cab roof |4.2.1 |a|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn drop link suspect loose |5.3.4 |a| |i|| | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture under chassis leg |1.1.11 |a|| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture under chassis leg |1.1.11 |a|| | 1 |
| Offside Rear Parking brake inoperative on one side very low reading |1.4.1 |a|| | 1 |
| Nearside Front Vehicle structure chassis cross member corroded |6.1.2| | 1 |
| Offside Front Vehicle structure chassis cross member corroded |6.1.2| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement on leaf spring |2.4.B.2| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill |marked with chalk| |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill |marked with chalk| |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded Step |marked with chalk| |5.2.6| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |marked with chalk| |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill |marked with chalk| |2.4.A.3| | 1 |
| Offside Inner Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Nearside Front Steering linkage ball joint has excessive play inner tie rod |2.1.3 |b| |i|| | 1 |
| Offside Front Steering linkage ball joint has excessive play inner tie rod |2.1.3 |b| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner insignificant repair to inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Leaf spring fractured triple leaf middle leaf broken |2.4.B.1a| | 1 |
| Nearside Outer Front Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing / flitch near shock absorber mount holed |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/ wheel arch holed near leaf spring mount / |6.1.B.2| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear outer sill (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside rear inner sill (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside front wheel arch (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front suspension top (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded two areas on chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward of leaf mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward of leaf mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch prescribed of shock mount |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill and step area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill and step area |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount/wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount/wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring|front| outrigger |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch/wing |2.4.A.3| | 1 |
| Nearside Rear Leaf spring main leaf fractured shackle end |5.3.1 |b| |ii|| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp n/s and o/s |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp n/s and o/s |1.2.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger rear of spring |2.4.A.3| | 1 |
| Fuel tank insecure front strap snapped (6.1.3 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded several areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded several areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded several areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded several areas |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded several areas |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded several areas |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting both sides |6.6.6| | 1 |
| Exhaust fumes entering the passenger area exhaust broken |7.1.5| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi / inner arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch / floor |2.4.A.3| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill has small hole |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outwr sill |6.1.B.2| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle On front driveshaft, need tiying onto body. |2.3.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at footwell (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced innersill at step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at rear crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering at fuel tank area |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.1 |c| |ii|| | 1 |
| Nearside Front Lower Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded ARCH |2.4.A.3| | 1 |
| Inner Subframe mounting prescribed area is excessively corroded ARCH |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded ARCH X2 |2.4.A.3| | 1 |
| Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.A.1| | 1 |
| Rear Brake lever has restricted free movement comp valve lever siezed |3.5.1k| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NS and OS outer sills. |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember rotten. |6.1.B.2| | 1 |
| Brake pedal pad not secure to the pedal Missing |3.3.A.1c| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and cill area marked yellow |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger area marked yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger area marked yellow |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded w/arch |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind strutt |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis above spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis above spring |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Inner and outer sill area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Inner and outer sill area |2.4.A.3| | 1 |
| Offside Rear Brake valve leaking |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner body (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner body (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake load sensing valve seized and ABS not fitted or inoperative Seized (1.1.17 (c) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill
body work (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of axle |2.4.A.3| | 1 |
| Nearside Rear Lower Leaf spring anchor bracket loose |2.4.B.6a| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering rigger to inner sill |6.1.A.1| | 1 |
| Nearside Rear Inner Vehicle structure has an inadequate repair which adversely affects braking or steering wheel arch rigger |6.1.A.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch end sill |2.4.A.3| | 1 |
| Front Steering locking device insecure |2.2.C.1g| | 1 |
| Offside Front Side repeater not working also insecure (4.4.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan under seat |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced footstep |7.1.1 |a| |i|| | 1 |
| Stop lamp emits other than a steady red light both rear |1.2.1e| | 1 |
| Nearside Body component damaged and likely to cause injury mirror backing missing exposing edges likely to injure (6.2.1 (a) (i)) | 1 |
| Fuel system component leaking injectors / spill pipe |7.2.3| | 1 |
| Nearside Front Suspension arm insecure ball joint lose in hub |2.4.G.1| | 1 |
| Front Lower Body panel damaged and likely to cause injury BUMPER APRON BROKEN EXPOSING EDGES LIKELY TO INJURE (6.2.1 (a) (i)) | 1 |
| Front Upper Body panel damaged and likely to cause injury GRILL INSECURE EXPOSING EDGES LIKELY TO INJURE (6.2.1 (a) (i)) | 1 |
| Nearside Body panel damaged and likely to cause injury MIRROR HOUSING DAMAGED EXPOSING EDGES LIKELY TO INJURE (6.2.1 (a) (i)) | 1 |
| Offside Rear Upper Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 1 |
| Nearside Rear Inner Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden both missing |2.4.A.1b| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both sides |4.4.3 |b|| | 1 |
| Offside Rear Wheel stud hole elongated |4.2.A.1d| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp when hazards on position lamp flashing |1.1.A.3f| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp when hazards on position lamp flashing |1.1.A.3f| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area weld broken away |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor above leaf spring |6.1.1 |c| |ii|| | 1 |
| Offside Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. |6.1.E.1| | 1 |
| Central Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Brake pipe inadequately clipped under bonnit |3.6.B.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnit |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step seat mountin |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step seat mountin |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills inner and outer |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills inner and outer |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front and rear mounting points |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leafspring front and rear mounting points |2.4.A.3| | 1 |
| Fuel system component leaking fuel leak on engine |7.2.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section by shock mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill and chassis section |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring mount |5.3.6 |a| |ii|| | 1 |
| Nearside Lower Windscreen in an unacceptable condition |3.2 |c| |i|| | 1 |
| Central Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Emissions not tested Due to exhaust condition |8.2.2.2 |e|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Within seat mount point |6.1.1 |c| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Offside Rear Road wheel fixings not compatible x 1 (5.2.2 (d)) | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded wing |2.1.2 |e| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured rear of cab |5.2.6| | 1 |
| Nearside Body has a sharp edge caused by damage tipper body |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage wing |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor and step |5.2.6| | 1 |
| Rear Brake pipe inadequately supported both across the axle |3.6.B.1| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step (6.1.1 (c) (i)) | 1 |
| Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Central Prop shaft bearing excessively worn mount (6.1.7 (b) (i)) | 1 |
| Offside Rear Direction indicator incorrect colour lens holed & indicator not working |1.4.A.2f| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded area at rear of cab |5.2.6| | 1 |
| Offside Front Lower Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Rear Fluid suspension unit fouled by moving parts likely to cause damage |2.4.D.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOX SECTION |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X 2 (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg as marked (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both chassis legs inner side above spring U bolts as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg in front of rear wheel as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mounting point ( several points as marked ) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring mounting point ( Several points as marked) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mounting point as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mounting point as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Shock absorbers likely to become detached Loose and has excessive play in wheel (5.3.2 (a) (ii)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded and rear box sections at spring eyes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front rear box sections at spring eyes |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member box section |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner & outer sills |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner & outer sills |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis within 30 cm of spring hanger |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering within 30 cm of spring hanger |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering within 30 cm of shock absorber |6.1.A.1| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill not continusly welded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan to sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked |7.1.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring anchor bracket insecure |5.3.1 |a| |i|| | 1 |
| Offside Front Body component damaged and likely to cause injury mirror cover |6.2.1 |a| |i|| | 1 |
| Central Seat belt buckle not functioning as intended not secure |7.1.2 |d|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step and floor |6.1.1 |c| |i|| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement all rear antirollbar bush det both sides |2.4.G.2| | 1 |
| Nearside Rear Dropside damaged and likely to cause injury and offside (6.2.1 (a) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury and offsideWINGS (6.2.1 (a) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides above axle |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component ball joint excessively worn ball joint |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inadequate repair |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inadequate repair |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill near spring mouht |2.4.A.3| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassi brake compensator |3.1.9| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Front Body has a projection caused by corrosion nearside & offside outer wings |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sills |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor & step |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor step |6.1.B.2| | 1 |
| Fuel tank insecure bracket broken & corroded |7.2.1| | 1 |
| Offside Front Inner Brake prescribed area is excessively corroded wing (1.1.21 (e) (i)) | 1 |
| Central Rear Seat belt likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Towbar attachment likely to become detached (6.1.6 (c) (ii)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner sill |6.1.B.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner bay corroded engine mount area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn anti roll bar D bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn anti roll bar D bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow crayon (6.1.1 (c) (i)) | 1 |
| Nearside Front Fuel tank insecure tank strap corroded (6.1.3 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering marked in yellow |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting maked in yellow |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near tow bar |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear beam |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner wheel arches |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body sill |6.1.B.2| | 1 |
| Brake performance not tested could not be tested due to snapped spring/ suspension on nsr only held on by shock absorber (1.2.1 (g)) | 1 |
| Offside Rear Leaf spring main leaf fractured snapped front and rear (5.3.1 (b) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab step (6.1.1 (c) (i)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases flexi (6.1.2 (a)) | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill marked in yellow |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill marked in yellow |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step marked in yellow |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step marked in yellow |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Shocker |2.4.A.3| | 1 |
| Mechanical brake component securing device excessively deteriorated |3.5.1i| | 1 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both steps |6.1.B.2| | 1 |
| Offside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible shackle mounting holed (5.3.1 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength over rear exhaust (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hangar (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength tow bar area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength behind tow bar (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mtg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside chassis leg (5.3.6 (a) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke not checked machine failure |7.4.B.3a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outriger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded over axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded over tow bar |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/inner sill |2.4.A.3| | 1 |
| Exhaust emissions exceed level of metered smoke for a non-turbo charged engine Reading 3.88K Max 2.50 K (8.2.2.2 (b)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed and corroded near outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Upper Track rod end loose |2.2.B.1d| | 1 |
| Tailgate insecure |6.2.1 |a| |i|| | 1 |
| Driver`s seat with a defective structure base corrosion |6.2.5 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step & sill |7.1.1 |a| |i|| | 1 |
| Rear Anti-roll bar linkage pin or bush likely to become detached n/s & o/s |5.3.4 |a| |ii|| | 1 |
| Rear Electrical wiring insecure and connectors likely to become disconnected |4.11 |a| |ii|| | 1 |
| Offside Outer Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced behind cab |6.1.1 |b| |ii|| | 1 |
| Central Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above axle both sides |6.1.1 |c| |i|| | 1 |
| Offside Suspension arm pin or bush excessively worn wish bone |5.3.4 |a| |i|| | 1 |
| Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Fuel system component leaking top engine |7.2.3| | 1 |
| Nearside Front Body insecure and dangerous to other road users bunper |6.1.B.1b| | 1 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement wish bone |2.4.G.2| | 1 |
| Central Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member |6.1.B.2| | 1 |
| Fuel tank insecure strap corrosion |7.2.1| | 1 |
| Stop lamp not working Both sides |1.2.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step&under sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step&under sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step and outer sill. (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step and outer sill. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring shackle inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch. (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases hanger. (6.1.2 (a)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footstep |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footstep |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear leaf spring front mounting areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDER ARCH |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND WHEEL |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND WHEEL |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR TO ARCH |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR TO ARCH |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired SILL |6.2.2 |d| |ii|| | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired UNDER ARCH |6.2.2 |d| |ii|| | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired UNDER ARCH |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL BY LEAF SPRING MOUNT |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL BY LEAF SPRING MOUNT |6.2.2 |d| |i|| | 1 |
| Nearside Rear Body insecure and dangerous to other road users body out rigger |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users body out rigger |6.1.B.1b| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
| Rear Brake pipe connection leaking on a hydraulic braking system leaking from load sensing valve |1.1.11 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring front (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring rear (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring (5.3.6 (a) (ii)) | 1 |
| Offside Inner Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/cab step |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r, o/s/f, n/s/r, n/s centre |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch and sill |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear to spring mounting |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan to outrigger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis near fuel tank |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis near fuel tank |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at bump stop mounting point |2.4.A.3| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view Glass Missing. |8.1.2a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sillls + o/s outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner + outer sills + both rear arches + o/s/f arch |6.1.B.2| | 1 |
| Hydraulic fluid leaking continuously posing a serious risk to road safety Steering Rack |8.4.1 |a| |ii|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Step (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill near cab corner (6.1.1 (c) (i)) | 1 |
| Offside Outer Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Offside Inner Seat belt insecurely fixed to the seat |5.1.B.2a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded / nearaside inner steps |5.2.6| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded / nearside rear |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded / nearside rear outer chassis rail |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded / nearside rear inner wheel arches |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded and nearside front / inner arches |2.4.A.3| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside rear inner and outer sills |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside rear at both ends of springs |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner / outer sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s sill and floor |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s sill and floor |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp coming on with stop lamps |1.1.A.3f| | 1 |
| Stop lamp adversely affected by the operation of another lamp both coming on with position lamps |1.2.1f| | 1 |
| Emergency exit door cannot be opened from inside the vehicle (9.1.2 (a)) | 1 |
| Nearside Front Other passenger door cannot be opened from outside the vehicle central |6.2.3 |a|| | 1 |
| Nearside Seat belt buckle not functioning as intended second row seat |7.1.2 |d|| | 1 |
| Offside Rear Cab mounting fixings insecure mounting cracked |6.2.2 |c| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded underside of step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded underside of step |5.2.6| | 1 |
| Direction indicator adversely affected by the operation of another lamp bad earth |1.4.A.2h| | 1 |
| Nearside Front Steering linkage deformed inner tie rod (2.1.3 (c) (i)) | 1 |
| Brake performance not tested hand brake cable broken or insecure (1.2.1 (g)) | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Side of rear body. |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion Side of rear body. |6.1.C.1| | 1 |
| Central Rear Body has a sharp edge caused by corrosion Back of rear body. |6.1.C.1| | 1 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance Broken light lence. |1.1.A.3d| | 1 |
| Nearside Rear Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Rear Body has a sharp edge caused by corrosion tailgate |6.1.C.1| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour due to broken light lens |1.1.A.3e| | 1 |
| Nearside Bumper insecure |6.1.4 |a| |i|| | 1 |
| Front Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Things all over the dash |3.1 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired back of cab (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired back of cab (7.1.1 (a) (i)) | 1 |
| Nearside Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Front Suspension arm ball joint excessively worn rear wish bone (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting door sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Tailgate cannot be secured in the closed position not secure |6.4.1| | 1 |
| Nearside Front brake caliper inappropriately repaired |3.5.1n| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear inner and outer sill |2.4.A.3| | 1 |
| Power steering component leaking Steering rack leaking (2.1.5 (a)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded NSR spring rear outrigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded NSR and OSR spring rear shackle mounting brackets |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded OSR inner valance |2.4.A.3| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Bulb is in wrong |4.1.2 |c|| | 1 |
| Offside Steering column flexible coupling retaining device missing |2.1.6| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded complete body sill |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded complete body sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded body sill/step |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded body sill/step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp when operated it makes the position lamp and rear fog light flash |1.4.A.2h| | 1 |
| Nearside Rear Leaf spring eye defective |anchor| snapped |2.4.B.1b| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp flashing with indicator |1.2.1f| | 1 |
| Fuel system component leaking leaking from rear of engine |7.2.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill seriously corroded |2.4.A.3| | 1 |
| Offside Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail in front of rear spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under cab and outer chassis rail (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced of cab (7.1.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail above fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis behind rear wheels marked in yellow |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker top mount in inner arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger next to inner step (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger in corner (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind drivers seat (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded drop sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded and centre of crossmember under cab |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mount |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mount on chassis |2.4.A.3| | 1 |
| Offside Rear Braking system leaking hub area |3.6.A.1| | 1 |
| Fuel hose leaking fuel filter |6.1.3 |b| |i|| | 1 |
| Hazard warning switch faulty NOT WORKING ALL FOUR LAMPS |1.4.B.1d| | 1 |
| Central Rear Prop shaft bearing excessively worn PROP-SHAFT BEAERING |6.1.7 |b| |i|| | 1 |
| Offside Front Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, front to back |chalked| |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, front to back |chalked| |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |under bonnet| |6.1.1 |c| |i|| | 1 |
| Front Anti-roll bar linkage insecurely attached nearside and offside |5.3.3 |a| |i|| | 1 |
| Rear Shock absorbers has a serious fluid leak nearside and offside |5.3.2 |b|| | 1 |
| Front Service brake excessively fluctuating nearside and offside |1.2.1 |e|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury arch |6.2.1 |a| |i|| | 1 |
| Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger&chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger & chassis |2.4.A.3| | 1 |
| Front Fuel tank insecure strap corroded & broken |7.2.1| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp stop/tail indicator |1.1.A.3f| | 1 |
| Centre Exhaust has a major leak of exhaust gases crushed/split |7.1.2| | 1 |
| Trailer electrical socket damaged so that lead cannot be securely connected & bare wiring |1.9.3b| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Turret & inner wing & chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Various near hanger bracket |2.4.A.3| | 1 |
| Rear Electrical wiring damaged, likely to cause a short at tow bar |1.9.2b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch /under bonnet area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis /out rig/spring mounts |6.1.B.2| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Front to rear at inner sill/cab step |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill/arch before the rear wheel |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Front to rear sill/cab step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis and cross member |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under bonnet inner arch area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings after rear spring mount |6.1.B.2| | 1 |
| Offside Rear All position lamps light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear bush perished |2.5.A.1c| | 1 |
| Front Fuel tank insecure tank support strap corroded |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded inner and outer |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill corroded inner and outer |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring mount area corroded |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded inner and outer |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded inner and outer |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded underside corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underside corroded |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded engine bay corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded underside corroded separating wheel arch skin |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Steering locking device missing |2.2.C.1g| | 1 |
| Offside Front Sub-frame corroded and seriously weakened chassis leg |2.4.G.1| | 1 |
| Trailer electrical socket deteriorated so that lead cannot be securely connected also not wired |1.9.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body panel to inner valance |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body panel sill to inner valance also inner valance and box section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section to floor |2.4.A.3| | 1 |
| Centre Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering and under front arch |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear off sill |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis at tank area |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under arch |6.1.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing corroded |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor area |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor area and shocker mounts |6.1.1 |c| |i|| | 1 |
| All position lamps have less than 50% of the light sources illuminating all side markers |1.1.A.3b| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn x2 |2.4.G.4d| | 1 |
| Nearside Inner Rear Seat belt stitching badly frayed |5.2.2b| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both sides drop link |2.4.G.2| | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both rear d bushes |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under foot well area x2 |5.2.6| | 1 |
| Front Brake disc significantly and obviously worn n/s & o/s |1.1.14 |a| |i|| | 1 |
| Offside Rear position lamp|s| insecure cracked white light to rear |1.1.A.3a| | 1 |
| Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Nearside Upper Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing/chassis (6.1.1 (c) (i)) | 1 |
| Windscreen in an unacceptable condition Windscreen cracked in the middle from top to bottom |3.2 |c| |i|| | 1 |
| Nearside Front Headlamp missing |4.1.1 |a| |ii|| | 1 |
| Oil leaking excessively from engine Excessive oil leak from turbo hose and oil filter housing |8.4.1 |a| |i|| | 1 |
| Nearside Rear Outer Valve stem seriously damaged |4.1.D.1e| | 1 |
| Offside Front Driver`s seat insecure front mounting corrision |6.2.A.1| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction sticker |3.1 |a| |ii|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring anchor |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shackle mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber |5.3.6 |a| |ii|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced fuel tank mounting |6.1.1 |c| |i|| | 1 |
| Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement both front D-BUSHES |2.4.G.2| | 1 |
| Rear wheel bearing has excessive play both rear |2.6.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings foot well |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp incorrect bulb and connector wrong way round |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi out rigger by spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi out rigger by spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi by spring front mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi by spring front mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded center inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front to rear of outer sill |5.2.6| | 1 |
| Front Upper Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Nearside Direction indicator not working not flashing |4.4.1 |a| |ii|| | 1 |
| Offside Direction indicator not working not flashing |4.4.1 |a| |ii|| | 1 |
| Power steering pump drive system defective auxiliary belt delaminating / possible crank pulley failure |2.3.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour lense broken |1.4.A.2f| | 1 |
| Nearside Rear fog lamp emits a light other than red lense broken |1.3.2e| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint PIPE TO RACK |2.3.3b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NEAR FUEL TANK |6.1.B.2| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded FRONT OF AND REAR OF |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR CROSS MEMBER HOLE |6.1.B.2| | 1 |
| Fuel tank insecure support strap corroded |7.2.1| | 1 |
| Central Rear Trailer electrical socket likely to become detached |4.10 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced cab step supporting panel |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced supports engine mount cross member |6.1.1 |c| |i|| | 1 |
| Centre Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel corroded and holed |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel corroded and holed |6.2.2 |d| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s & n/s / bump stops missing |5.3.6 |a| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen o/s & n/s |4.1.2 |a|| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp flashing with other lights |4.2.3 |c|| | 1 |
| Front Suspension arm pin or bush excessively worn rear wishbone bushes split o/s & n/s |5.3.4 |a| |i|| | 1 |
| Offside Rear Stop lamp does not face the rear |1.2.1a| | 1 |
| Offside Front Braking system leaking flexi pipe to caliper |3.6.A.1| | 1 |
| Offside Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Offside Brake cable insecure broken in drum |3.5.1d| | 1 |
| Offside Leaf spring anchor bracket fractured |2.4.B.6b| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve |3.3.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Offside Rear Glazing/screen/partition likely to cause injury to any person on the vehicle |6.9.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage lamp broken |6.1.C.1| | 1 |
| Offside Front Headlamp aim does not move downwards when dipped |British American headlamp| |1.8.C.4| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet (5.3.6 (a) (i)) | 1 |
| Centre Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/body |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/body |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/chassis |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/chassis |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing to strut top |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step x2 |5.2.6| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill by step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step x 2 |5.2.6| | 1 |
| Leaf spring has excessive wear in an anchor pin and/or bush near side rear spring front bush |2.4.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded off side door step area |5.2.6| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill x4 |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis |inner arch| |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |inner arch| |2.4.A.3| | 1 |
| Exhaust silencer likely to become detached front clamp missing |8.1.1 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger near rear spring shackle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Rear Lower Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Front Body pillar so insecure that load stability or security is likely to be seriously impaired Corroded (6.2.1 (b) (ii)) | 1 |
| Offside Rear Body pillar so insecure that load stability or security is likely to be seriously impaired Corroded (6.2.1 (b) (ii)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear inner bush (5.3.4 (a) (i)) | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected crossmember (1.1.21 (e) (ii)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat frame mount (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor under seat |7.1.1 |a| |i|| | 1 |
| Central Front Steering rack insecure (2.1.3 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill & step |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill & step |5.2.6| | 1 |
| Nearside Front Fuel tank insecure strap badly corroded |6.1.3 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Rear Service brake indicates brake judder |3.7.D.1| | 1 |
| Offside Front Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Nearside Front suspension has a loose unit in the upper support bearing assembly |2.5.B.3b| | 1 |
| Offside Front suspension has a loose unit in the upper support bearing assembly |2.5.B.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer arch |2.4.A.3| | 1 |
| Fuel system component insecure strap broken |7.2.1| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both |1.7.5a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner outer sills |6.1.B.2| | 1 |
| Offside Body has a projection caused by corrosion inner and outer sills |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wings x4 |6.1.B.2| | 1 |
| Nearside Front Lower Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Offside Rear Lower Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Lower Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassic |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassic |2.4.A.3| | 1 |
| Offside Direction indicator incomplete |1.5.1b| | 1 |
| Obligatory mirror does not provide a view to the rear |6.6.1c| | 1 |
| Seat belt anchorage prescribed area is excessively corroded NSF + OSF inner / outer sills / OSF step / NSF chassis rail by tank |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded NSR + OSR inner / outer sills / NSR outriggers / NSR valence / NSR + OSR chassis rails / OSR + OSF inner wheel archs |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering sills / chassis rails as chalked |6.1.A.1| | 1 |
| passenger door cannot be opened from outside the vehicle N/S side door handle |6.2.B.1c| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill to wheel arch area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill to wheel arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch and box to floor area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch box and floor area |6.1.B.2| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush both D bushes |2.4.G.2| | 1 |
| Offside Rear Direction indicators adversely affected by the operation of another lamp with stop light |1.4.A.2h| | 1 |
| Front rear brake excessively fluctuating |3.7.B.3| | 1 |
| Hazard warning switch inoperative hazards turn off and affect the operation of the indicators |4.4.2 |a| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/ doorstep |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/ doorstep |6.2.2 |d| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger and rear quarter |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg inner wheel arch an under the leg |6.1.1 |c| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting center sill |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is fractured |3.1.9| | 1 |
| Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour emissions not tested |8.2.2.2 |d|| | 1 |
| Anti-roll bar pin or bush excessively worn both rear d bushes |5.3.4 |a| |i|| | 1 |
| Rear Floor insecure plate (6.2.4 (a) (i)) | 1 |
| Rear Outer Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Suspension arm pin or bush likely to become detached rear (5.3.4 (a) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner step, not continually welded (7.1.1 (a) (i)) | 1 |
| Offside Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front outrigger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is severely distorted inner /outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted chasis |2.4.A.3| | 1 |
| Power steering malfunctioning WHEN TURNING TO THE RIGHT |JUDDERING| |2.3.3a| | 1 |
| Fuel tank insecure both tank straps (6.1.3 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outriger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outriger |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outriger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis has a large lump near the bump stop and general condition of vehicle is poor |6.1.A.1| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sills and rear arches as marked (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure has excessive corrosion which adversely affects braking or steering Sill (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering Arch (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering Chassis behind wheel (6.1.1 (c) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded underbody sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded underbody sill |2.4.A.3| | 1 |
| Offside Outer Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step & inner and outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step & inner and outer sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded arch & inner and outer sill rear panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded arch & inner and outer sill rear panel |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill several places (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill several places (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill several places (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill several places (6.2.2 (d) (i)) | 1 |
| Front Headlamp cleaning device obviously defective |1.7.2| | 1 |
| Brake pipe leaking behind fuel filter |3.6.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear spring hanger |6.1.B.2| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 1 |
| Nearside Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp n/s + o/s |1.1.A.3f| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in engine bay (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step corrosion 30 cm of sub frame mounting point (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area corrosion 30 cm leaf spring mounting point (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corrosion 30 cm of rear leaf spring mounting point (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure |5.3.4 |b| |ii|| | 1 |
| Centre Braking system leaking brake pipe |3.6.A.1| | 1 |
| Rear Body insecure and dangerous to other road users Tail gate fixings missing. |6.1.B.1b| | 1 |
| Nearside Rear Body has a sharp edge caused by damage Drop side damaged . |6.1.C.1| | 1 |
| Seat belt webbing significantly weakened middle passenger (7.1.2 (b) (ii)) | 1 |
| Service brake lagging in operation slow to release (1.2.1 (d)) | 1 |
| Front brake disc insecure |3.5.1i| | 1 |
| Trailer electrical socket insecure Wiring damaged |1.9.3a| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both outrigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded subframe mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 1 |
| Driver`s seat insecure seat base loose |6.2.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded turret and inner wing section |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded turret and inner wing section |2.4.A.3| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis section |2.2.C.1h| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis lower section |2.4.A.3| | 1 |
| Nearside Rear Outer Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Offside Rear Outer Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Offside Front Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Seat belt anchor point. (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (highlighted) and also hole in outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (highlighted) (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (highlighted) (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quarter (highlighted) by rear leaf spring mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Spring hanger mount (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Rear Outer Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Outer Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner step/sill area (7.1.1 (a) (i)) | 1 |
| Nearside Outer Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Nearside Stop lamp does not face the rear |1.2.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Wheel arch area |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis rail near fuel tank |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill side step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner valance near spring hanger |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sill |6.1.B.2| | 1 |
| Offside Rear Wheel nut|s| missing |3 nuts| |4.2.A.1e| | 1 |
| Offside Dropside cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Rear Dropside insecure floor |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 1 |
| Nearside Front Inner Body insecure to the extent that stability is seriously impaired wheel arch |6.2.2 |a| |ii|| | 1 |
| Offside Front Inner Body insecure to the extent that stability is seriously impaired |6.2.2 |a| |ii|| | 1 |
| Offside Front Inner Body insecure to the extent that stability is seriously impaired wheel arch |6.2.2 |a| |ii|| | 1 |
| Central Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Dropside insecure |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Front Body has a sharp edge caused by damage Bumper |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by damage Sliding door handle |6.1.C.1| | 1 |
| Nearside Rear Upper Stop lamp not working |1.3.2a| | 1 |
| Rear Upper Rear position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
| Offside Upper Front position lamp|s| does not face the front |1.1.4b| | 1 |
| Nearside Front Direction indicator incomplete |1.5.1b| | 1 |
| Nearside Fuel tank leaking |6.7.1a| | 1 |
| Exhaust system not adequately supported front pipe to centre box split around weld |7.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill to step |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill section |2.4.A.3| | 1 |
| Offside Front Brake pipe excessively damaged |1.1.11 |c|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn arm bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill to arch |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail /engine mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Stop lamp emits other than a steady red light lens cracked |1.2.1e| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings steps |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innersill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innersill |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear arm bush |2.4.G.2| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced And outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner &outer sills |5.2.6| | 1 |
| Fuel tank insecure check strap snapped |7.2.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near hangers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near hangers |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near bump stops |2.4.A.3| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis leg |3.1.9| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, near top mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/upper step area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced In sill /upper step area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced In sill lower step area (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced In and outer sill areas (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced In and outer sill areas including in door shut (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D rubber (5.3.4 (a) (i)) | 1 |
| Nearside passenger door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Rear Statutory seat belt missing storks x2 |5.1.1| | 1 |
| Offside Front Fuel system component insecure |7.2.1| | 1 |
| Nearside Outer Suspension component attachment bracket/mounting corroded and seriously weakened sill (5.3.3 (b) (i)) | 1 |
| Offside Inner Suspension component attachment bracket/mounting corroded and seriously weakened sill (5.3.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger by swinging shackle |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch|rear sub mount| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and out rigger near front spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step underneath. |6.1.B.2| | 1 |
| Central Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings valance holed underneath |6.1.B.2| | 1 |
| Rear wheel cylinder leaking |3.6.A.1| | 1 |
| Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength transmission tunnel (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured front spring eye |5.3.1 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing chassis (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside rear swing shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded swing shackle mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded swing shackle mount |2.4.A.3| | 1 |
| Centre Rear Lower passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Offside Rear Leaf spring fractured Shackle eye. |5.3.1 |b| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leak spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded offside front floor area |2.4.A.3| | 1 |
| Nearside Rear Direction indicator not working (1.4.A.2c) | 1 |
| Nearside Front Upper All position lamps not working (1.1.A.3b) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Nearside Obligatory mirror insecure (8.1.1) | 1 |
| Offside Front Body has a sharp edge caused by damage Mirror (6.1.C.1) | 1 |
| Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded And outer sill (2.4.A.3) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Both wheel arches (2.4.A.3) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill and step (2.4.A.3) | 1 |
| Nearside Front Headlamp not working on main beam (1.7.5a) | 1 |
| Rear Brake load sensing valve seized (3.6.E.3) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength siil |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member |5.3.6 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Not welded |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i)) | 1 |
| Nearside Rear engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
| Offside Rear engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area x2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded in steep |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded in steep |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint pipe to rack |2.3.3b| | 1 |
| Power steering pipe/hose leaking low pressure pipe seal |2.1.5 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner valance (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/arch front and rear of wheel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/arch (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill to step |5.2.6| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded bulk head behind seats |5.2.6| | 1 |
| Nearside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings close to cab |inside and out| |6.1.B.2| | 1 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings close to cab |inside and outside| |6.1.B.2| | 1 |
| Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear |4.2.3 |b| |ii|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body |6.1.1 |c| |i|| | 1 |
| Front Cab steps in such a condition that it is likely to cause injury both front steps corroded |6.2.8 |b|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount corroded |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting corroded |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering heavy rust between rear leaf spring |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering heavy rust between rear spring |6.1.1 |c| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inside wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inside wheel arch |2.4.A.3| | 1 |
| Rear Body has a projection caused by corrosion tail light board |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage light lense |6.1.C.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis behind drivers wheel , (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded right at rear out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail x2 |2.4.A.3| | 1 |
| Centre Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Battery insecure and likely to cause a short circuit behind driver seat (4.13 (a) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides next to step (6.1.1 (c) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play in and out movement (5.1.3 (a) (i)) | 1 |
| Fuel tank insecure rear strap excessively corrcded (6.1.3 (a) (i)) | 1 |
| Tie bar/rod attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill front centre and rear |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill centre and rear |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front centre and rear |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch,shock mounting |2.4.A.3| | 1 |
| Centre Brake linkage excessively damaged and seriously weakened |3.5.1e| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings out riggor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggor |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure chassis weld breaking away. |6.1.5| | 1 |
| Nearside Rear Exhaust has part of the system excessively deteriorated |6.3.1a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked front to rear |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box sections near anchor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/box sections near anchor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/box section/lower panel/floor near hanger |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg ; all sides |2.4.A.3| | 1 |
| Rear Brake pipe inadequately supported at rear flexi |3.6.B.1| | 1 |
| Nearside Rear Outer All position lamps not working side marker |1.1.A.3b| | 1 |
| Offside Rear Outer All position lamps not working side marker |1.1.A.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush nearside and offside D bushes |2.4.G.2| | 1 |
| Nearside Outer Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Outer Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Wheel bolt|s| missing wheel bearing bolt missing |4.2.A.1e| | 1 |
| Fuel tank insecure strap excessively corroded |7.2.1| | 1 |
| Front Prop shaft securing bolt loose x3 |6.1.7 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour lens damaged |1.4.A.2f| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member/ spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member/spring mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring front mounting |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush displaced |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis,near load valve |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near leaf spring mounting |2.4.A.3| | 1 |
| Offside Front engine mounting bracket insecure and likely to fail chassis exessive corrosion |6.1.D.1b| | 1 |
| Offside Brake valve insecurely mounted chassis corroded |3.6.A.2a| | 1 |
| Drive shaft joint constant velocity boot missing |6.1.7 |g| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under-stepsill area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under-stepsill area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner-wing |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 1 |
| passenger door does not latch securely closed BONNET |6.2.B.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded REAR OUTER SILL OF CAB |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering UNDER BONNET |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INSIDE WHEEL ARCHE |2.4.A.3| | 1 |
| Offside Rear Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Rear Lower Stop lamp emits other than a steady red light lamp lenze emitting white light broken |1.2.1e| | 1 |
| Nearside Front Upper Front position lamp|s| not working side lamp out cabin top also on offside on |1.1.A.3b| | 1 |
| Power steering component leaking at steering rack |2.1.5 |a|| | 1 |
| Body component corroded and likely to cause injury rear buck |6.2.1 |a| |i|| | 1 |
| Body component damaged and likely to cause injury rear buck |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end/inner arch |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill backing at front and rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill at front |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassie outriger |2.4.A.3| | 1 |
| Offside Rear Brake cable guide defective and affecting operation |1.1.15 |d|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under n/s cab |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting tow bar it self |6.6.6| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel holding lamps and number plate badly corroded and insecure |6.1.B.2| | 1 |
| Trailer electrical socket damaged so that lead cannot be securely connected tow bar socket |1.9.3b| | 1 |
| Nearside Front Side repeater not working missing |1.4.A.2c| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Inner Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
| Rear Vehicle structure is fractured and structural rigidity is significantly reduced O/S,N/S OUTER CHASSIS CRACKED, near inner wheel arches |6.1.1 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossbeam with handbrake on it (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake pipe leaking joint to caliper |3.6.A.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top where it meets bulk |2.4.A.3| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release 2-nd row |5.2.5a| | 1 |
| Body has a sharp edge caused by damage front bumper insecure |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring box and inner sills |2.4.A.3| | 1 |
| Nearside Drag link end ball pin shank loose |2.2.B.1c| | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury hole under step |6.2.8 |b|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arche to floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arche to floor |2.4.A.3| | 1 |
| Nearside Seat belt retracting mechanism defective centre |5.2.5b| | 1 |
| Offside Seat belt retracting mechanism defective centre |5.2.5b| | 1 |
| Hazard warning lamps inoperative ALL |1.4.B.1b| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle rear side door |6.2.B.1c| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values first rev 3.12. Min 0.68 (8.2.2.2 (f)) | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn loose (5.3.4 (a) (i)) | 1 |
| Front Prop shaft securing bolt loose 2 missing as well (6.1.7 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS,UNDER BONNET. |2.4.A.3| | 1 |
| Nearside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.3| | 1 |
| Nearside Rear Anti-roll bar pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Anti-roll bar pin or bush excessively worn both rears |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of leaf spring including the outersill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill repair not seam welded |2.4.A.3| | 1 |
| All position lamps adversely affected by the operation of another lamp all position lamps affected by stop lamps |1.1.A.3f| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front spring mount (6.2.2 (d) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| engine mounting bracket damaged and likely to fail Cross member |6.1.D.1b| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both ends |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has a fracture which adversely affects braking or steering axle bump stop |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has a fracture which adversely affects braking or steering axle bump stop |6.1.A.1| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Front Position lamp showing red light to the front (4.2.3 (a) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan as marked (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear cab to floor pan as marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure Nut missing |2.4.G.1| | 1 |
| Stop lamp|s| all missing |4.3.1 |a| |iii|| | 1 |
| Position lamp not working both front |4.2.1 |a|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both |5.3.4 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded X3 ALL MARKED IN YELLOW |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Marked in yellow |5.2.6| | 1 |
| Nearside Lower Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SHOCK ABSORBER MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has holes |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has holes |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has holes |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has holes |6.1.B.2| | 1 |
| Fuel pipe insecure by tank |6.1.3 |a| |i|| | 1 |
| Nearside Rear Leaf spring fractured fractured by mounting point |5.3.1 |b| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength by gearbox |5.3.6 |a| |i|| | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced water in lamp |1.7.5a| | 1 |
| Nearside Stop lamp emits other than a steady red light lamp painted |1.2.1e| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmemeber |2.4.A.3| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced BOTH SIDES |6.1.1 |a| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH SEALS |6.1.1 |c| |i|| | 1 |
| Central Rear Sub-frame corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassie |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis section behind wheel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis section in engine bay |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under step sill area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired under step sill area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing panel behind wheel |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing panel in engine bay |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis cross section above spare wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both front inner arches |5.3.6 |a| |i|| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nearside - under vehicle |6.2.2 |d| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded chassis cross section behind cab handbrake mounting badly corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded chassis cross section above fuel tank badly corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded chassis cross section under cab corroding hole |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded chassis cross section infront of spare wheel o/s/ rear |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis section behind wheel |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under sill rear part of cab |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded chassis cross section under rear of cab |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately supported to hose |3.6.B.1| | 1 |
| Fuel system component leaking injector 1 and 2 area |7.2.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUT RIGGER X 3 |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s&o/s spring hangers (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around shock absorber (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r spring hanger |2.4.A.3| | 1 |
| Nearside Rear Upper Shock absorber detached |2.7.2b| | 1 |
| Nearside Outer Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OF CAB |5.2.6| | 1 |
| Offside Outer Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion WING |6.1.C.1| | 1 |
| Offside Front brake caliper modified and seriously weakened |3.5.1n| | 1 |
| Nearside Front Lower Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 1 |
| Nearside Rear Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Nearside All outline marker lamps not working side marker |4.2.1 |a|| | 1 |
| Front All outline marker lamps not working both sides |4.2.1 |a|| | 1 |
| Rear All outline marker lamps not working both sides |4.2.1 |a|| | 1 |
| Nearside Rear Lower Bonded suspension unit attachment loose |2.4.F.1a| | 1 |
| Other passenger door catch insecure side loading door (6.2.3 (c) (ii)) | 1 |
| Other passenger door likely to open inadvertently or not remain closed side loading door (6.2.3 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Side repeater adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak middle section (8.2.1.1 (b)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement mount bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement mount bush |2.4.G.2| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Central Front Statutory seat belt missing locking mechanism |5.1.1| | 1 |
| Nearside Front position lamp|s| not working side marker light |1.1.A.3b| | 1 |
| Electrical wiring insecure both sides of the body |1.9.2a| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values reading4.23 limit1.22 (8.2.2.2 (f)) | 1 |
| Nearside Front Headlamp are incorrectly positioned too high (4.1.4 (a)) | 1 |
| Offside Front Headlamp are incorrectly positioned too high (4.1.4 (a)) | 1 |
| Nearside Front Outer Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Nearside Front Lower Suspension component insecurely attached ball joint loose in mounting (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Yellow chalk marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Yellow chalk marked |5.3.6 |a| |i|| | 1 |
| Central Exhaust has a major leak of exhaust gases at silencer |6.1.2 |a|| | 1 |
| Offside Front Service brake juddering severely |3.7.C.2| | 1 |
| Steering component fractured and unserviceable |2.2.C.1d| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing [marked] (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing [marked] (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner step (marked with chalk) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner step (marked with chalk) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer/inner sill (marked with chalk) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring rear mount x2 (marked with chalk) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Leaf spring front mount(marked with chalk) (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected Leaf spring front mount (marked with chalk) (5.3.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis mount |5.3.6 |a| |i|| | 1 |
| Upper Stop lamp not working |1.3.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring mount |6.1.B.2| | 1 |
| Nearside Rear Lower Macpherson strut has excessive play in the sliding bush or gland |2.5.B.1b| | 1 |
| Offside Rear Lower Macpherson strut has excessive play in the sliding bush or gland |2.5.B.1b| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill backing |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill backing |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded out rigger
|2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out-rigger/box section areas - leaf spring shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - shock absorber prescribed area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis - brake load valve prescribed area (1.1.21 (e) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS UNDER BONNET (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg close to rear leaf spring mounting hanger |marked| |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wing area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger behind wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger behind wheel |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt lower arm (5.3.4 (b) (ii)) | 1 |
| Rear Stop lamp(s) not working Both (4.3.1 (a) (ii)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis inner and outer |2.4.A.3| | 1 |
| Nearside Front drive shaft damaged |2.5.C.2a| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn nsr inner wishbone arm bush (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn osf inner wishbone arm bush (5.3.4 (a) (i)) | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury osf inner sill to cab step holed & corroded (6.2.8 (a) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member 2 places |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind strut (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member x2 (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill x 3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Offside Rear Body panel corroded and likely to cause injury tail board (6.2.1 (a) (i)) | 1 |
| Offside Front Windscreen washer control is inaccessible to the driver |8.2.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both inner sills holed |6.1.A.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch,various holes |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch,various holes |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill areas rusted |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill areas rusted |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Around gearbox mounting area. (5.3.6 (a) (ii)) | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear shackle area. (5.3.6 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear spring shackle area. (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sil |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sil |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |front of wheel arch| |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil |5.3.6 |a| |i|| | 1 |
| Nearside Inner Road wheel badly damaged |4.2.A.1a| | 1 |
| Power steering inoperative steering stiff and noisy |2.1.5 |c| |i|| | 1 |
| Power steering fluid reservoir empty level very low |2.1.5 |b| |ii|| | 1 |
| Offside Front Upper Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Inner Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis at rear |6.1.1 |a| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure has a fracture which is likely to adversely affect braking or steering wing corroded |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering inner wing corroded |6.1.1 |a| |ii|| | 1 |
| Power steering pipe/hose leaking both power steering pipes into rack |2.1.5 |a|| | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected lights interacting |4.4.1 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch 2 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner rear arch |2.4.A.3| | 1 |
| Nearside Body component corroded and likely to cause injury Middle Outer Sill (6.2.1 (a) (i)) | 1 |
| Prop shaft bearing likely to break up Rear Most Prop Shaft Bearing (6.1.7 (b) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front Of Wheel Arch Liner (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front Of Wheel Arch Liner (6.1.1 (c) (i)) | 1 |
| Steering component is not secure to the vehicle structure lower column universal joint |2.2.B.1a| | 1 |
| Horn not working lose wiring |1.6.2a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sills near rear suspension excessively corroded |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both steps and both rear arches |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill both sides (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting subframe mount (6.2.2 (d) (i)) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement both |2.4.G.2| | 1 |
| Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at bump stop |6.1.B.2| | 1 |
| Direction indicator adversely affected by the operation of another lamp all rear lights |1.4.A.2h| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing. |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected Cylinder leaking (1.1.7 (d) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front to rear inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Furthest rear outrigger and inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***step***
|6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings **chassis to cill***
|6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ***inner arch***
|6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings *** rear corner chassis to cill***
|6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill section |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by damage door |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted rear shackle area |2.4.A.3| | 1 |
| Front Power steering pipe|s| or hose|s| leaking front of radiator |2.3.3b| | 1 |
| Offside Front Body has a projection caused by damage bumper corner |6.1.C.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear leaf spring hangers |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner wheel arches/floor |6.1.B.2| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement both front lower arm bushes |2.4.G.2| | 1 |
| Offside Headlamp not working on dipped beam aim not checked |1.7.5a| | 1 |
| Fuel cap/sealing device sealing washer missing cap missing |7.2.4c| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded and rear inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded and rear inner sill |5.2.6| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion fender |6.1.C.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inside engine bay |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded at rear |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded at rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear wheels |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear wheels |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER FRONT WING |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNERFRONT WING |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill & step area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill & step area (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area after wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill, small hole caused by excessive corrosion |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn inner rear |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill corroded |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill corroded |5.2.6| | 1 |
| Front Bonnet primary retaining device insecure bonnet catch missing |3.1 |c|| | 1 |
| Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only not working |3.1.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front and rear |6.1.B.2| | 1 |
| Nearside Rear Parking |secondary| brake grabbing severely |3.7.D.3b| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill several areas |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill several areas |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill to inner sill and door step |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger to inner quarter |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger to inner quarter |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear crossmember tow bar mounts |6.2.2 |d| |i|| | 1 |
| Nearside Rear Shock absorbers has an excessively worn bush upper bush (5.3.2 (c)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush upper bush (5.3.2 (c)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch upper and lower (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis located inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch footwell (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mount marked in yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor mount box section area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill areas marked in yellow |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill areas |2.4.A.3| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush marked in yellow |2.4.G.2| | 1 |
| Nearside Front Track rod end ball joint has excessive play marked in yellow |2.2.B.1f| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step area marked in yellow |5.2.6| | 1 |
| Power steering malfunctioning fluid low and steering lumpy oil leak |2.3.3a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing assy close to suspention mounting |6.1.B.2| | 1 |
| Fuel tank insecure Front fuel tank strap broken. |7.2.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering sub frame mounting area |6.1.A.1| | 1 |
| Power steering pump leaking from a failed component pump area |2.3.3b| | 1 |
| Nearside Inner brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside Outer Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Upper Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Outer Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake load sensing valve linkage defective and function impaired Parts missing |3.6.E.3| | 1 |
| Power steering component insecure reservoir mounting |2.1.5 |d| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded at load sensing valve |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anchor area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension anchor area |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured Spring broken at front bush eye |2.4.B.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis under wheel arch |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Under sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Under sill |5.2.6| | 1 |
| Nearside Front Upper Power steering pump insecure |2.3.6| | 1 |
| Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Prop shaft joint excessively worn centre bearing excessivley worn (6.1.7 (c) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ADJ REAR OF REAR SPRING MOUNT |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch after wheel holed marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch holed marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch holed marked (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis under bonnet near engine mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury arch corroded (6.2.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner sills |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Headlamp lens seriously defective damaged sharp edge |4.1.1 |b| |ii|| | 1 |
| Front Body component damaged and likely to cause injury bumper missing |6.2.1 |a| |i|| | 1 |
| Nearside Leaf spring anchor pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering o/s & n/s front |6.1.A.1| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering o/s& n/s front inner wings |6.1.A.1| | 1 |
| Front Body has a sharp edge caused by damage grill |6.1.C.1| | 1 |
| Nearside Rear Lower passenger door does not latch securely closed insecure |6.2.B.1a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp Bad Earth (4.2.3 (c)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded footwell area |5.2.6| | 1 |
| Power steering component|s| leaking rack area saturated, unable to see source of leak |2.3.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor crossmember |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired flat bed panels broken load can spill under neath to mechanical parts (6.2.2 (d) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT CROSSMEMBER CARRYING RADIATOR AND TURBO COOLER INSECURE (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR UNDER DRIVERS SEAT (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached BOLT LOOSE (5.3.3 (a) (i)) | 1 |
| Outline marker lamp missing ALL OUTER MARKER LAMPS MISSING (4.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Rear Service brake: efficiency below requirements |3.7.D.4| | 1 |
| Nearside Inner Front Lower Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Offside Inner Rear Lower Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside Inner Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside Front Brake linkage excessively corroded |1.1.15 |b|| | 1 |
| Offside Front Brake linkage excessively corroded |1.1.15 |b|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 1 |
| Offside Inner Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both sides rear of rear spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In wheel arch |5.3.6 |a| |i|| | 1 |
| Front Windscreen wiper not working both |3.4 |a|| | 1 |
| Offside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mid (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch behind wheel |2.4.A.3| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis near l/s/v |3.1.9| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear chassis, nearside rear inner arch and outer sill |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced below brake servo (6.1.1 (c) (i)) | 1 |
| Offside Outline marker lamp not working side marker (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working side marker (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting both sides rear (6.1.6 (i) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury wing coroded area sharp (6.2.1 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassic |6.1.B.2| | 1 |
| Fuel tank insecure Fixing Strap Rotted Through |6.1.3 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear crossmember |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded by rear crossmember |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at both front and rear mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at both front and rear mounting areas |2.4.A.3| | 1 |
| Offside Front Brake pipe leaking to hose |3.6.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor/inner arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer stepsill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Outer stepsill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Dropsill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Dropsill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Under wheel arch at bottom |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outersill at rear |2.4.A.3| | 1 |
| Nearside Rear Rear fog lamp emits a light other than red cracked /white light |1.3.2e| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis leg holed |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/upper floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step/inner sill |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Brake load sensing valve linkage defective and function impaired insecure |3.6.E.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring mounting point |rear| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting point |on chassis| |2.4.A.3| | 1 |
| Offside Rear Shock absorber casing damaged externally so the unit does not function bent |2.7.2a| | 1 |
| Offside Front Lower Driver`s seat with a defective structure corroded |x2| |6.2.5 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount |x2| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring fixing corroded |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded below servo,in 2 places |3.6.C.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail corroded in 2 places |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded REAR MOUNT |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded FRONT & REAR MOUNTS |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting CHASSIS RAIL |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded TOP SHOCK MOUNT |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded TOP SHOCK MOUNT |2.4.A.3| | 1 |
| Offside Rear Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind washer bottle as marked |6.1.B.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded wheel arch as marked |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill to step as marked |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing chaasie |6.1.B.2| | 1 |
| Nearside Rear Body has a projection caused by corrosion inner arch |6.1.C.1| | 1 |
| Front Fuel tank insecure Tank strap |7.2.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Undersill |2.4.A.3| | 1 |
| Offside Front suspension has excessive movement at a wishbone pin or bush wishbone bush |2.5.A.1c| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/o sill +o/s/i sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch on inner lip |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind rear spring |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear x member |6.1.B.2| | 1 |
| Nearside Front Upper Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Upper Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded WHEERL ARCH |2.4.A.3| | 1 |
| Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BY SILL (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired STEP (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S STEP |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S CENTRE OUTER SILL IN 2 PLACES |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S/R OUTER SILL BEHIND AXLE |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S/R INNER SILL BEHIND AXLE |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S/R CORNER INSIDE OF WHEEL ARCH |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired N/S/R INNER SILL BEHIND AXLE, ALSO CHASSIS LEG ISNT STRUCTUALLY ATTACHED |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch inner |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded door step sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER ARCH/CHASSIS |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER ARCH/CHASSIS |2.4.A.3| | 1 |
| Nearside Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Multiple areas including inner and outer sill, and inner cabin step (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Multiple areas (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front and rear leaf spring mountings, and sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring mounting and sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Floor excessively deteriorated Boot floor (6.2.4 (a) (i)) | 1 |
| Nearside Rear position lamp|s| incorrect colour white light to rear |1.1.A.3e| | 1 |
| Exhaust system not adequately supported first silencer |7.1.1| | 1 |
| Front Windscreen wiper blade missing both |8.2.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill end/wheel arch |6.1.B.2| | 1 |
| Fuel system component leaking rear of engine |7.2.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch several places |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill in several places |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner panel between sill and outrigger just forward of road wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner panel between sill and outrigger just forward of road wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger near front spring hangers in several places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger near front spring hangers in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to inner arch on the rear edge |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing behind strut |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing behind strut |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to sill in front of wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch to sill in front of wheel |2.4.A.3| | 1 |
| Offside Rear passenger door pillar deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Lower Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Lower Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill / panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount | inner body | |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mout |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mount |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded middle outer sill |2.4.A.3| | 1 |
| Bonnet cannot be secured in the closed position unable to open |8.4.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded foot step underside |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded anti roll bar link mountain |2.4.A.3| | 1 |
| Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced both sides |7.1.1 |a| |i|| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing|needs tape| |6.1.C.1| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by brake pipe bracket and spring mount|front and rear of cross member| |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by spare wheel mount|n/s and o/s front and rear| |6.1.B.2| | 1 |
| Offside Rear rear brake recording little or no effort nearside rear service brake reading low |3.7.B.5a| | 1 |
| Body component corroded and likely to cause injury n/s outer sill and wheelarch |6.2.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured spring rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured spring rear mount |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured at brake load valve |3.3.A.2| | 1 |
| Rear Exhaust system not adequately supported o-ring |7.1.1| | 1 |
| Offside Rear Rear position lamp|s| missing out liner light |1.1.A.3a| | 1 |
| Nearside Rear Rear position lamp|s| not working out liner light badly damage |1.1.A.3b| | 1 |
| Rear Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Offside Front Engine mounting damaged or deteriorated resulting in excessive movement x member badly corroded |6.1.8 |a| |i|| | 1 |
| Offside Front Outer Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Front Sub-frame insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to step (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and inner wing chalked |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cab rear panel (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab rear panel (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan behind seats (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near side front inner suspension turret area (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of off side rear chassis rail above rear spring front mount area (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid chassis cross member area (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member/chassis (5.3.6 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` on dashboard |8.3.1e| | 1 |
| Nearside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance dim |1.2.1d| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing nut loose |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing nut loose |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced out rigger inside cab |7.1.1 |a| |i|| | 1 |
| Central Prop shaft joint so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Exhaust emissions exceed manufacturers specified limit 4.64 (8.2.2.2 (a)) | 1 |
| Nearside Front Road wheel fixing loose nuts (5.2.1 (a) (i)) | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded door step |5.2.6| | 1 |
| Fuel tank insecure both straps broken (6.1.3 (a) (i)) | 1 |
| Offside Rear Direction indicator incorrect colour cracked lens (4.4.3 (a)) | 1 |
| Prop shaft bearing housing fractured excessive play in rubber mounted bearing (6.1.7 (f) (i)) | 1 |
| Rear Brake performance not tested brakes seized on (1.2.1 (g)) | 1 |
| Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
| Offside Front Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 1 |
| Offside Front Power steering pipe|s| or hose|s| inappropriately modified |2.3.7| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn 2nd flexible mounting |2.4.G.4d| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill x2 holes |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill x1 hole |6.2.2 |d| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cab / chassis mount x 1 hole |6.2.2 |d| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush link |2.4.G.2| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced behind cab |6.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced behind cab |6.1.1 |a| |i|| | 1 |
| Nearside Stop lamp|s| not working bad earth |4.3.1 |a| |ii|| | 1 |
| Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced prop carrier cross brace top (6.1.1 (c) (i)) | 1 |
| Nearside Inner Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Fuel tank insecure Front tank strap corroded. |7.2.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner above subframe (6.1.1 (c) (ii)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing. |6.1.C.1| | 1 |
| Track rod end modification unsafe o/s/f track rod end worn |2.1.3 |f| |i|| | 1 |
| Leaf spring anchor pin or bush excessively worn rear leaf spring bushs worn |5.3.4 |a| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn `D` bushes |5.3.4 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill outer and inner chalked |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s inner arch chalked |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion both sills |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded sills inner and outer, door steps corroded, |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at rear of cab |6.1.B.2| | 1 |
| Offside Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 1 |
| Offside Rear Outer Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Anti-roll bar fractured |5.3.3 |b| |ii|| | 1 |
| Anti-roll bar insecurely attached BOTH REAR D BUSHES (5.3.3 (a) (i)) | 1 |
| Offside Rear Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 1 |
| Outline marker lamp adversely affected by the operation of another lamp ALL REAR (BAD EARTH?) (4.2.3 (c)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Engine mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded By exhaust (2.1.2 (e) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn Loose (5.3.4 (a) (i)) | 1 |
| Prop shaft flexible coupling excessively deteriorated Both (6.1.7 (d) (i)) | 1 |
| Nearside Outline marker lamp missing CENTRE (4.2.1 (a) (ii)) | 1 |
| Rear Prop shaft joint excessively worn AXLE UJ (6.1.7 (c) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side LOW EFFORT 96KG (1.4.1 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded around rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded around rear spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded around front of spring hanger |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting both mounting points |6.6.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis, visible from under wheel arch |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis 3 areas chalked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under arch area |2.4.A.3| | 1 |
| Offside Rear All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded lower and inner door step and inner sill holed and correded |5.2.6| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded inner and lower door step and inner sill |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at cable support bracket |3.1.9| | 1 |
| Front Brake pipe inadequately supported to rears |3.6.B.1| | 1 |
| Electrical wiring deteriorated and bare wires exposed under car body at tank area |1.9.2c| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D BUSHES (5.3.4 (a) (i)) | 1 |
| Emissions not tested smokey |8.2.2.2 |e|| | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached bolt loose |5.3.3 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnet |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint nut missing |2.4.G.2| | 1 |
| Nearside Rear Leaf spring cracked front |2.4.B.1a| | 1 |
| Offside Rear Leaf spring cracked front |2.4.B.1a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wheel arch....... |6.1.C.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember at cable mounting........... |3.1.9| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill....... (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill....... (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear bush......... (5.3.4 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill........ (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing....... (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system not adequately supported back box |7.1.1| | 1 |
| Brake has no servo assistance intermittent |3.3.B.2| | 1 |
| Fuel system component leaking engine comp |7.2.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Step Sill Corroded |7.1.1 |a| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Step Sill Corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Brake pipe inadequately supported INSECURE |3.6.B.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Lower arm rear bush (5.3.4 (a) (i)) | 1 |
| Prop shaft joint excessively worn Centre prop carrier (6.1.7 (c) (i)) | 1 |
| Outline marker lamp not working both rear side markers |4.2.1 |a|| | 1 |
| Offside Parking brake inoperative on one side very low performance (1.4.1 (a)) | 1 |
| Offside Rear Wheel bearing has excessive play slight noise as well (5.1.3 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill near seat belt and seat mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill /step near seat and seat belt mount (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing hole within prescribed area of crossmember bolts (6.1.1 (c) (i)) | 1 |
| Anti-roll bar linkage ball joint excessively worn both rear |5.3.4 |a| |i|| | 1 |
| Front Outline marker lamp not working Both on roof |4.2.1 |a|| | 1 |
| Nearside Front Brake pipe likely to become detached or damaged Routed around rear off engine rubbing. |1.1.11 |d| |ii|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine Black |7.4.B.3b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Both inner sills & steps . |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Sills corroded on outer |5.2.6| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded At inner chassis at spring eye. |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement Saddle/D bush. |2.4.G.2| | 1 |
| Nearside Front Body panel corroded and likely to cause injury outer wing (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury outer wing (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced AT STEP SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced AT STEP SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt webbing significantly weakened DRIVERS (7.1.2 (b) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Above front sub frame |Chalked| |6.2.2 |d| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour crack |1.4.A.2f| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush link broken |2.4.G.2| | 1 |
| Outline marker lamp not working all rear (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) emits other than a steady red light lens broken white light showing (4.3.3 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced passenger step (7.1.1 (a) (i)) | 1 |
| Nearside Front Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ceoss member |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger. |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step Area |6.1.B.2| | 1 |
| Offside Front Inner Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Inner Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Outer Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Inner Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Outer Body component corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Body component corroded and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury spring hanger |6.2.1 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury spring hanger |6.2.1 |a| |i|| | 1 |
| Rear Body component corroded and likely to cause injury x member |6.2.1 |a| |i|| | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp Side repeater (4.4.3 (b)) | 1 |
| Headlamp not working on main beam both lamps (4.1.1 (a) (ii)) | 1 |
| Side repeater missing both nearside and offside missing (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture badly corroded (1.1.11 (a)) | 1 |
| Offside Rear Leaf spring with an unsafe modification not correctly located on other spring (5.3.1 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired under body sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured broke in saddle |2.4.B.1a| | 1 |
| Front Windscreen in an unacceptable condition Windscreen cracked |3.2 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded Outrigger |2.1.2 |e| |i|| | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded Outrigger near spring |2.1.2 |e| |i|| | 1 |
| Fuel system component leaking excessively or a risk of fire From fuel pump |6.1.3 |b| |ii|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Valance |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill |5.3.6 |a| |ii|| | 1 |
| Nearside Upper Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Offside Obligatory mirror missing door mirror glass missing |8.1.1| | 1 |
| Nearside Front Lower Electrical wiring damaged, likely to become detached |1.9.2b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 1 |
| Offside Brake disc contaminated (1.1.14 (b)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills, offside chassis above leaf spring, offside rear chassis rail (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Body work around rear end of both rear road springs MARKED (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering all side of the engine mounting very large hole |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering side of chassis rail in wheel arch |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger box |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch (6.1.1 (c) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear out sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear inner sill (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering osr inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Brake performance not tested cant get grears to move out of rollers (1.2.1 (g)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded box section and support bar |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch and sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box section area into wheel arch |2.4.A.3| | 1 |
| Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings both rear chassis rails fractured above rear axle area |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid inner sill area corroded excessively |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor area excessively corroded |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor area excessively corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill end to wheel arch |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill to out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing to chassie (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing to chassie (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill front and centra (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill front and centra (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced front floor (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insure (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch front of spring (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step / sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber area (5.3.6 (a) (i)) | 1 |
| Nearside Outer Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Stop lamp not working when side lights on |1.2.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/inner wing |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch to step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Around top of shock absorber mount |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired Chassis (5.3.6 (a) (i)) | 1 |
| Engine mounting damaged or deteriorated resulting in excessive movement Cross member corroded |6.1.8 |a| |i|| | 1 |
| Nearside Rear Stop lamp(s) likely to become detached (4.3.1 (c) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch previously repair not suitable (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced wish boune rear bush |2.4.F.2| | 1 |
| Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced wish boune rear bush |2.4.F.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded all |2.4.A.3| | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill front of rear n/s wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of wheel arch outrigger corroded |6.1.B.2| | 1 |
| Nearside Reversing lamp inoperative |4.6.1 |a|| | 1 |
| Offside Reversing lamp inoperative |4.6.1 |a|| | 1 |
| Rear Suspension has inadequate clearance with the bump stop both rear bump stops missing |2.4.A.1a| | 1 |
| Bonnet retaining device ineffective can`t be opened |8.4.2| | 1 |
| Nearside Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Wheel bearing rough when rotated Plus end play (5.1.3 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, seen from under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, seen from under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill in front of rear axle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to floor panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill close to step (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill close to spring hanger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Cross memeber close to spring carrier (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Cross member close to spring carrier (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wheel arch in front of wheel (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg inside of wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg Inside of wheel arch (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected Chassis leg by load sensing valve (1.1.21 (e) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering AT BRAKE LOAD VALVE |6.1.A.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 1 |
| engine mounting bracket damaged and likely to fail cross member corroded and holed |6.1.D.1b| | 1 |
| Front Exhaust system not adequately supported insecure |7.1.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect needs new bulb |1.8.A.1b| | 1 |
| Nearside Outer Front Lower Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Rear Lower Trailer electrical socket damaged so that lead cannot be securely connected |1.9.3b| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing by strut |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rearmost |2.4.G.2| | 1 |
| Offside Upper Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Nearside Rear Suspension unit leaking deflated (5.3.5 (c)) | 1 |
| Nearside Rear Leaf spring with an unsafe modification bottom leak cut (5.3.1 (d) (i)) | 1 |
| Offside Rear Leaf spring with an unsafe modification bottom leaf cut (5.3.1 (d) (i)) | 1 |
| Offside Front Service brake lagging in operation slow relese at wheel (1.2.1 (d)) | 1 |
| engine mounting bracket fractured and likely to fail cradell corroded |6.1.D.1b| | 1 |
| Rear Anti-roll bar pin or bush excessively worn d/bushes x2 (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing spring mounting |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis visible from under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Under side of chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner side of chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer side of chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sides of the rear chassis leg extension piece from after the rear leaf spring mounting has corroded and separated. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed at subframe/crossmember fixing area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch / inner awing is corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm insecure and impairing directional stability suspension arm front fixing bolt is loose allowing movement of the arm at its fixing (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Brake cable damaged fouling wheel (1.1.15 (a)) | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt also slight play |2.2.C.1c| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step sill x3 places |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear part of outer sill |5.2.6| | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired chassis cross section |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis cross section |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded center chassis |2.4.A.3| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement tempoary cap fitted |7.2.4b| | 1 |
| Offside Rear Outline marker lamp does not illuminate simultaneously with the position lamps o (4.2.2 (a)) | 1 |
| Nearside Outline marker lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Front Side repeater adversely affected by the operation of another lamp Staying on |1.4.A.2h| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement Rear |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn bolt loose (5.3.4 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central cross member corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Tie bar/rod has excessive play in a pin/bush bolt loose |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached loss (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Upper Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Nearside Rear Upper Direction indicators not working |1.4.A.2c| | 1 |
| Centre Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded footstep |2.4.A.3| | 1 |
| Offside Rear Suspension arm locating pin locking device missing D |2.4.G.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired doorstep |6.2.2 |d| |ii|| | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired doorstep |6.2.2 |d| |ii|| | 1 |
| Front Upper Integral body structure is fractured and structural rigidity is significantly reduced offside and nearside top inner wing as marked to chassis in side eugine bay (6.1.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength as marked offside and nearside shock absorber mounting inner wing (5.3.6 (a) (i)) | 1 |
| Front Integral body structure is fractured and structural rigidity is significantly reduced offside nearside inner wing to main chassis (6.1.1 (a) (i)) | 1 |
| Front Body panel corroded and likely to cause injury offside and nearside wheel arches (6.2.1 (a) (i)) | 1 |
| Windscreen damaged and affecting the drivers view of the road crack in Zone A (3.2 (a) (ii)) | 1 |
| Central Front Lower Oil leaking excessively from engine coming from oil sump nut |8.4.1 |a| |i|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment Handbrake lever |1.1.6 |c|| | 1 |
| Central Rear Towbar component defective |6.1.6 |a|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill areas within 30 cm of seat mounting (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill areas within 30 cm of seat mounting (7.1.1 (a) (i)) | 1 |
| Offside Front Service brake indicates brake judder |3.7.D.1| | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced split (6.1.1 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm pin or bush likely to become detached rear bush (5.3.4 (a) (ii)) | 1 |
| Rear Anti-roll bar linkage insecurely attached loose (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded backpanel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section inside rear arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded box section inside rear arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch to floor |2.4.A.3| | 1 |
| Nearside Front Inner Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDERSTEPS (6.1.1 (c) (i)) | 1 |
| Nearside Drag link end ball joint has excessive play inner tie rod |2.2.B.1f| | 1 |
| Offside Drag link end ball joint has excessive play inner tie rod |2.2.B.1f| | 1 |
| Nearside Inner Steering system has excessive free play detected at the steering wheel |steering rack fitted| Rack joint |2.2.A.1b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel aarch (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmembers x3 |6.1.1 |c| |i|| | 1 |
| Rear position lamp|s| not working boh sides |1.1.A.3b| | 1 |
| Body insecure and dangerous to other road users Bed tilt and slide both sides rear bolts |6.1.B.1b| | 1 |
| Offside Rear Leaf spring fractured by front mounting |2.4.B.1a| | 1 |
| Nearside Front Suspension component corroded and seriously weakened inner arch (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension component corroded and seriously weakened inner arch (5.3.3 (b) (i)) | 1 |
| Nearside Front Suspension component corroded and seriously weakened chassis (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn drop link (5.3.4 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury drop side board corroded sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced no beam image |1.7.5a| | 1 |
| Horn not loud enough to be heard by another road user horn is very quiet |1.6.2b| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill & wheel arch has sharp edges |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing pocket |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi leg |2.4.A.3| | 1 |
| Offside Front Body component corroded and likely to cause injury step (6.2.1 (a) (i)) | 1 |
| Nearside Front Upper Body insecure chassis (6.2.2 (a) (i)) | 1 |
| Nearside Front Inner Body obviously not squarely located on chassis wheel arch excessive corrosion (6.2.2 (b)) | 1 |
| Offside Front Inner Body obviously not squarely located on chassis (6.2.2 (b)) | 1 |
| Nearside Front Body insecure not fully secured on the chassis (6.2.2 (a) (i)) | 1 |
| Front Upper Body insecure to the extent that stability is seriously impaired inner wheel arches (6.2.2 (a) (ii)) | 1 |
| Front Inner Body insecure and outer sills corroded excessively (6.2.2 (a) (i)) | 1 |
| Offside Front Outer Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 1 |
| Offside Front Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Inner Front brake disc excessively scored |3.5.1h| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.A.1| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.A.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis holed |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded Both front cross members | engine mounting area | |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear panel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear panel |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis top R/H/F marked |6.1.B.2| | 1 |
| Offside Rear Lower passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower ball joint |2.2.C.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmemer |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and inner sill |6.1.B.2| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle side slide |6.2.B.1c| | 1 |
| Electrical wiring insecure at rear under vehicle |1.9.2a| | 1 |
| Nearside Rear Leaf spring deteriorated and seriously weakened Large piece missing |2.4.B.1a| | 1 |
| Front Front position lamp|s| incorrect colour x2 |1.1.A.3e| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to leaf spring mount |6.1.B.2| | 1 |
| Nearside Front Wheel nut|s| missing x1 |4.2.A.1e| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner arch + o/s/inner sill |6.1.B.2| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour light cracked showing white |1.1.A.3e| | 1 |
| Offside Rear Direction indicator incorrect colour light cracked showing white |1.4.A.2f| | 1 |
| Nearside Rear Body has a projection caused by corrosion 1/4 has corrosion at rear light unit bonnet coming away |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill. |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded step & sills |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired lower sill joint |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step & sills |5.2.6| | 1 |
| Offside Rear Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Inner Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis and inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and outer sill |2.4.A.3| | 1 |
| Offside Body has a sharp edge caused by damage Mirror backing |6.1.C.1| | 1 |
| Central Front Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring chassis area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear wheel arch/ inner sill area |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis out rigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis member |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner sill/ wheel arch area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner sills |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers step |6.1.B.2| | 1 |
| Power steering fluid level below minimum and container loose |2.3.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill at rear |2.4.A.3| | 1 |
| Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting rear cross member |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch behind wheel and floor |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sills |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel and box section near shackle( back) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel and box section near shackle back (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shackle (front) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member near shackle (5.3.6 (a) (i)) | 1 |
| Offside Rear Towbar has excessive damage seriously affecting its strength within 30cm of a towbar mounting x member (6.1.6 (i) (i)) | 1 |
| Emissions not tested pipe broken |7.4.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear out rigger by rear spring mount |2.4.A.3| | 1 |
| Nearside Front Body has a projection caused by corrosion bumper corner insecure |6.1.C.1| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings O/S Rear sill to front of rear wheel arch |6.1.B.2| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint Lower Ball Joint |2.5.B.1a| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush Lower wishbone arm rear bush |2.5.A.1c| | 1 |
| Nearside Braking system leaking ABS PUMP LEAKING WHEN PRESSURE IS APPLIED |3.6.A.1| | 1 |
| front brake binding both front flexy hoses strangled by corrosion withing clamps |3.7.B.1| | 1 |
| Nearside Rear Leaf spring anchor pin not correctly positioned |2.4.B.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded above axle |2.4.A.3| | 1 |
| Nearside front brakes release unevenly slow to release |3.7.B.4| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded upper shock absorber mounting corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front leaF spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring mounting
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring mounting
|2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by l/s/v |3.3.A.2| | 1 |
| Front Exhaust has a major leak of exhaust gases E/G/R pipe on engine |7.1.2| | 1 |
| Supplementary Restraint System warning lamp indicates a fault airbag light |5.4.2| | 1 |
| Nearside Front Inner Track rod end ball joint has excessive play Rack end. (2.1.3 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and chassis. (5.3.6 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next leaf spring mounting |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner + outer sills |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sills / outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sills / outriggers |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outriggers / chassis / panels (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outriggers / chassis /panels (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch joint |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front and rear inner/outer sill corroded (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front and rear inner/outer sill corroded (6.2.2 (d) (i)) | 1 |
| Central Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill corroded. (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill corroded.(front to back) (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner arch corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner arch corroded front to back (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Chassis leg corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner chasis leg (6.2.2 (d) (i)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Under body has corrosion from front to back. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Under floor seatbelt (7.1.1 (a) (i)) | 1 |
| Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) | 1 |
| Offside Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mount area inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury Bumper (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill ending (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger by rear leaf spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger by rear leaf spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by bump stop (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by rear shock - chalked (5.3.6 (a) (i)) | 1 |
| Direction indicators adversely affected by the operation of another lamp WHEN THE LIGHTS ARE ON |1.4.A.2h| | 1 |
| Body insecure and dangerous to other road users N/S AND O/S BODY BOLTS INSECUR E - MARKED |6.1.B.1b| | 1 |
| Offside Rear Electrical wiring deteriorated and bare connector exposed |1.9.2c| | 1 |
| Nearside Front Outer Braking system leaking STEEL PIPE SPLIT |3.6.A.1| | 1 |
| Offside Front Outer Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Outer Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front Outer Direction indicator not working |1.4.A.2c| | 1 |
| Central Inner Drive shaft uj which forms part of the suspension has a loose flange bolt BEARING BREAKING UP ON PROP SHAFT |2.4.G.4c| | 1 |
| Offside Rear Outer Side repeater not working |1.4.A.2c| | 1 |
| Nearside Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger |7.1.1 |a| |i|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired chassis leg as marked/no weld on upper edge |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis behind wheel |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded gross member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/arch |5.3.6 |a| |i|| | 1 |
| Stop lamp not working ns+os |1.2.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s sills holed (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Front Headlamp not working on dipped beam both sides |1.7.5a| | 1 |
| Direction indicators not working both front and rear |1.4.A.2c| | 1 |
| Nearside Front Wheel stud|s| missing x2 |4.2.A.1e| | 1 |
| Offside Front Wheel bolt|s| missing x2 |4.2.A.1e| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg under brake servo |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint above axle |2.3.3b| | 1 |
| Centre Front Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp Stop light (4.4.3 (b)) | 1 |
| Nearside Front Body component corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases hanger |7.1.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength full arch hole (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength full arch holed near crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed in multiple places (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member holed at hand brake cable (5.3.6 (a) (i)) | 1 |
| Brake performance not tested because of brake leak |1.2.1 |g|| | 1 |
| Offside Obligatory mirror insecure wing |8.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mount area |5.3.6 |a| |i|| | 1 |
| Nearside Front Windscreen in an unacceptable condition zone A more than 10mm |3.2 |c| |i|| | 1 |
| Offside Front Windscreen in an unacceptable condition more than 40mm swept area |3.2 |c| |i|| | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative load valve seized |1.1.17 |c| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill/out rigger at front of rear spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger at rear of rear spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger at rear of rear spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill front of rear spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by load compensator |1.1.21 |e| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rearmost bush (5.3.4 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above chassis rail to front floor (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Engine bay (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Underside (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner Wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear Leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury Sill sharp edge (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury Wing sharp edge (6.2.1 (a) (i)) | 1 |
| Offside Front Lower Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut turret support panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut turret support panel |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i)) | 1 |
| Central Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crose member crossion |6.1.B.2| | 1 |
| Central Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step mounted front |6.1.B.2| | 1 |
| Front Headlamp not working on dipped beam not WOSRKING DIP OR MAINBEAM |1.7.5a| | 1 |
| Offside Front Track rod end ball pin shank loose EXSIVE LIFT |2.2.B.1c| | 1 |
| Offside Rear Body has a projection caused by corrosion LOWER DOOR SILL INNER AND OUTER |6.1.C.1| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SECOND MEMBER FRONT / REAR SIDE CORROSION TO 3RD CROSS MER BER |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CORROSION TIPPER RAM N/S O/SCROSMEMBER |6.1.B.2| | 1 |
| Offside Rear Lower Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i)) | 1 |
| Centre Rear Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hold |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension arm likely to fail corrode |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer step section |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill section marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner and outer marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded after arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded after arch |2.4.A.3| | 1 |
| Nearside Front position lamp|s| incorrect colour body marker |1.1.A.3e| | 1 |
| Nearside Outline marker lamp lens seriously defective (4.2.1 (b)) | 1 |
| Nearside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached crossmember (6.1.6 (i) (ii)) | 1 |
| Offside Rear Vehicle structure is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached crossmember (6.1.6 (i) (ii)) | 1 |
| Central Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step sill (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel holed |6.1.B.2| | 1 |
| Offside Rear Fluid leaking continuously posing a serious risk to road safety brake |8.4.1 |a| |ii|| | 1 |
| Front engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded anchor point-inner & outer sills |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle point -inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor point-inner & outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle point- inner wing & rear valance |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind step |6.1.B.2| | 1 |
| Offside Outer Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chasiss leg |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area by leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded door step x5 places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember x2 places |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear bush on arm |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (front of wheel) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (rear of wheel) (5.3.6 (a) (i)) | 1 |
| Brake valve leaking such that brake functionality is affected Load sensor valve |1.1.7 |d| |ii|| | 1 |
| rear brake juddering severely |3.8.A.5b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill *3 |5.2.6| | 1 |
| Emissions not tested over heated |7.4.B.1| | 1 |
| Rear Brake pedal has insufficient reserve travel hand brake lever (1.1.2 (a)) | 1 |
| Central Prop shaft bearing housing likely to fail prop shaft carrier bearing (6.1.7 (f) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step holed (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt likely to become detached in the event of a collision not detached to seat (7.1.1 (a) (ii)) | 1 |
| Nearside Front Lower Sub-frame ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Track rod end ball joint has excessive play and tie rod end (2.1.3 (b) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of step out rigger area (6.1.1 (c) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting behind seat (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting bumper mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow (6.1.1 (c) (i)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Both front strut top inner wings (5.3.6 (a) (i)) | 1 |
| Emissions not tested Severe coolant leak, no water (8.2.1.2 (d)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn inner bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn inner bush (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower dust cover holed (5.3.4 (b) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor area near seat mount |6.2.2 |d| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded both centre cross members |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded both centre cross members |2.4.A.3| | 1 |
| Offside Outer Front Brake pipe leaking |3.6.A.1| | 1 |
| Wheel insecure hub nut missing o/s |4.2.A.1c| | 1 |
| Wheel insecure 2 hub nuts missing n/s |4.2.A.1c| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner step |5.2.6| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement Both "D" bushes |2.4.G.2| | 1 |
| Offside Rear position lamp|s| insecure additional side light insercure |1.1.A.3a| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D-bush |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush & nut missing |2.4.G.2| | 1 |
| Nearside Outer Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arches various places (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both cabsteps various places (5.3.6 (a) (i)) | 1 |
| Rear Body mounting fixings insecure tipper pivot (6.2.2 (c) (i)) | 1 |
| Rear Floor excessively deteriorated tipoer floor (6.2.4 (a) (i)) | 1 |
| Front Windscreen damaged and affecting the drivers view of the road cracked (3.2 (a) (ii)) | 1 |
| Offside Rear Body insecure and dangerous to other road users wheel guard insecure |6.1.B.1b| | 1 |
| Offside Front Body has a projection caused by damage bumper loose |6.1.C.1| | 1 |
| Nearside Front Wheel stud hole elongated |4.2.A.1d| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D bush. |5.3.4 |a| |i|| | 1 |
| Nearside Front Upper Outline marker lamp showing red light to the front |4.2.3 |a| |ii|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to step (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Bottom ball joint (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached Bottom ball joint (5.3.4 (a) (ii)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror cover misssing (6.2.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre box seam split (6.1.2 (a)) | 1 |
| Offside Body component likely to become detached step behind cab (6.2.1 (a) (ii)) | 1 |
| Prop shaft bearing excessively worn rear bearing (6.1.7 (b) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Bottom arm rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Upper Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Nearside Rear Brake valve leaking (1.1.7 (a) (i)) | 1 |
| Nearside Front suspension retaining device ineffective Hub bolt loose |2.5.A.4| | 1 |
| Offside Rear Suspension rod pin or bush excessively worn link pin (5.3.4 (a) (i)) | 1 |
| Nearside Rear position lamp|s| incorrect colour lamp/lens broken |1.1.A.3e| | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure offside and nearside |2.4.G.1| | 1 |
| Offside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer rear sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Steering arm damaged and unserviceable |2.2.C.1d| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting nut missing drop link |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush d shape |2.4.G.2| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside floorpan corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Reversing lamp inoperative (4.6.1 (a)) | 1 |
| Nearside Front Body panel insecure Wing insecure (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Body panel corroded and likely to cause injury Wheel arch corroded (6.2.1 (a) (i)) | 1 |
| Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Front Subframe mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Brake performance not tested burst main run pipe (1.2.1 (g)) | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture axle brake pipe (1.1.11 (a)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step and under step areas (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drivers side floor area and seatbelt mouts and seat mounts (5.3.6 (a) (i)) | 1 |
| Exhaust silencer likely to become detached outer skin (8.1.1 (b) (ii)) | 1 |
| Nearside Front Leaf spring anchor pin or bush excessively worn bush (5.3.4 (a) (i)) | 1 |
| Offside Front Leaf spring anchor pin or bush excessively worn bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn dbush (5.3.4 (a) (i)) | 1 |
| Body component damaged and likely to cause injury rear tail bord (6.2.1 (a) (i)) | 1 |
| Nearside Rear Tailgate cannot be secured in the closed position pin missing |6.4.1| | 1 |
| Offside Front Body insecure and dangerous to other road users bumper inscure |6.1.B.1b| | 1 |
| Anti-roll bar attachment bracket/mounting insecure both rears |2.4.G.1| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour Lamp broken allowing white light to rear |1.1.A.3e| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn Roll bar d bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn Roll bar d bush (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Body insecure and dangerous to other road users front bumper |6.1.B.1b| | 1 |
| Offside Front Sub-frame insecure frame loose to chassis |2.4.G.1| | 1 |
| Nearside Front Upper Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Body has a sharp edge caused by damage wing and bumper |6.1.C.1| | 1 |
| Offside Rear position lamp|s| not working plus hole in lens |1.1.A.3b| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp stop light shining into indicator / suspect divider plate missing |1.4.A.2h| | 1 |
| Rear Brake pipe inadequately clipped front to rear pipes |3.6.B.1| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D-link bush excessive play (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D-link bush excessive play (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Bottom arm rear bush excessive play (5.3.4 (a) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side Low effort (1.4.1 (a)) | 1 |
| Body mounting fixings insecure such that stability is seriously impaired offside and nearside rear body frame corroded at mountings (6.2.2 (c) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn mounting worn (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn d-bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Central Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement bush to rear |2.4.G.2| | 1 |
| Nearside Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Central Prop shaft likely to become detached u/j securing bolt missing (6.1.7 (a) (ii)) | 1 |
| Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Body component insecure (6.2.1 (a) (i)) | 1 |
| Rear Body panel corroded and likely to cause injury Off side and near side outer wings |6.2.1 |a| |i|| | 1 |
| Nearside Front Body panel damaged and likely to cause injury Mirror cover missing |6.2.1 |a| |i|| | 1 |
| Rear Outline marker lamp missing Off side and near side |4.2.1 |a|| | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Off side and near side inner sill / door step area |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing area |5.3.6 |a| |i|| | 1 |
| Offside Rear Body component damaged and likely to cause injury Mud guard |6.2.1 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded Off side and near side inner wing area |2.4.A.3| | 1 |
| Inner Rear Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion drop side |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion drop side |6.1.C.1| | 1 |
| Front fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired n/s and o/s chassis (6.2.2 (d) (ii)) | 1 |
| Nearside Seat belt retracting mechanism defective twisted and not retracting |7.1.2 |e|| | 1 |
| Fuel cap/sealing device ineffective Cap broken |6.1.3 |b| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre crossmember |6.1.1 |c| |i|| | 1 |
| Exhaust system not adequately supported Rubber mounting |7.1.1| | 1 |
| All position lamps not working |n/s/f| . |o/s/f|.| n/s/r|. |o/s/r| |1.1.A.3b| | 1 |
| Power steering component|s| leaking from a failed joint steering rack badly leaking |2.3.3b| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch marked in yellow |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch marked in yellow |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded side step ,inner sill all marked in yellow |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded side step and inner sill all marked in yellow |2.4.A.3| | 1 |
| Rear Towbar component excessively corroded both marked in yellow |6.6.1| | 1 |
| Nearside Front Upper Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Front Upper Body panel corroded and likely to cause injury TIPPER BODY SIDES (6.2.1 (a) (i)) | 1 |
| Offside Rear Lower Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Rear Lower Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Rear Lower Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Outer Horn not working |1.6.2a| | 1 |
| Offside Front Body has a sharp edge caused by damage bumper corner |6.1.C.1| | 1 |
| Front Brake cable has wires broken and is significantly weakened broke whilst carrying out brake test |3.5.1b| | 1 |
| Fuel system component leaking excessively or a risk of fire around injection pump |6.1.3 |b| |ii|| | 1 |
| Nearside Front Front position lamp|s| not working roof |1.1.A.3b| | 1 |
| Offside Front Windscreen in such a condition that visibility through swept area is seriously affected screen has major crack in it (3.2 (c) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam bulb missing (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on main beam bulb missing (4.1.1 (a) (ii)) | 1 |
| Nearside Front Side repeater incorrect colour flashing white instead of orange (4.4.3 (a)) | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury hole in step (6.2.8 (b)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drivers side seat anchorage excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury step has excessive corrosion in multiple places (marked with yellow crayon) (6.2.8 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour showing white light (4.4.3 (a)) | 1 |
| Offside Front Service brake grabbing severely when brake is pressed calliper grabs excessively needs new caliper (1.2.1 (c)) | 1 |
| Nearside Front Outer Fuel tank insecure back tank strap corroded off and tied with extension code (6.1.3 (a) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underside of step corroded in 2 places (marked with yellow crayon) (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn d bush has excess play (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underside of step has corrosion in 3 places (marked with yellow crayon) (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Suspension arm pin or bush excessively worn bottom arm rear bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Suspension arm pin or bush excessively worn bottom arm rear bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Road wheel fixing missing 2 studs have snapped (5.2.1 (a) (i)) | 1 |
| Offside Front Road wheel fixing missing wheel nut missing (5.2.1 (a) (i)) | 1 |
| Nearside Front Wheel stud|s| missing snapped |4.2.A.1e| | 1 |
| Central Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Steering locking device missing track rod end |2.2.C.1g| | 1 |
| Offside Rear fog lamp does not emit a steady red light lamp lens broken |4.5.4 |a|| | 1 |
| Body panel corroded and likely to cause injury load area holed (6.2.1 (a) (i)) | 1 |
| Lower Torsion bar attachment bracket loose |2.4.E.4a| | 1 |
| Offside Front Windscreen wiper not working loose wiper arm (3.4 (a)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached link bolt / hole may be worn over size in antiroll bar (5.3.3 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn "D" mounting bush very worn (5.3.4 (a) (i)) | 1 |
| Central Prop shaft bearing housing insecure bush worn (6.1.7 (f) (i)) | 1 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt split |5.3.4 |b| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill |7.1.1 |a| |i|| | 1 |
| Central Seat belt missing seat belt stalk missing |7.1.2 |a|| | 1 |
| Anti-roll bar has excessive play in a pin/bush both rear on axle |2.4.G.2| | 1 |
| Nearside Outer Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d ush |2.4.G.2| | 1 |
| Offside Front Front position lamp|s| not working side lamp |1.1.A.3b| | 1 |
| Offside Rear Leaf spring main leaf fractured at the front spring eye (5.3.1 (b) (ii)) | 1 |
| Offside Rear Anti-roll bar insecurely attached at the link, washer missing (5.3.3 (a) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn D BUSHES (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS,SPRING HANGER AREA (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced BEHIND CAB AREA (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOX SECTION ON CHASSIS IN 2 PLACES (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL CORRODED (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch area multiple places (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch area multiple places (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure rear strap cable tied |6.1.3 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH AREA (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced IN 2 PLACES (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill and step (6.1.1 (c) (i)) | 1 |
| Offside Parking brake inoperative on one side cable broken |1.4.1 |a|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn D rubber |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing and rail (6.1.1 (c) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Body panel insecure (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step (6.1.1 (c) (i)) | 1 |
| Body panel corroded and likely to cause injury both front wings (6.2.1 (a) (i)) | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement lower engine cradel (6.1.8 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross chassie (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/engine bay (6.1.1 (c) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury cab area/body mount (6.2.1 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front position lamp|s| not working top marker |1.1.A.3b| | 1 |
| Nearside Front Service brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded Below in engine bay / o/s/f inner wheel arch (1.1.21 (e) (i)) | 1 |
| Rear Brake valve leaking Load valve (1.1.7 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step area`s marked in yellow |5.2.6| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush insecure lower drop link nut |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush insecure lower drop link nut |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Prop shaft bearing excessively worn front bearing marked in yellow chalk |6.1.7 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step/sill areas within 30 cm of seat mountings |7.1.1 |a| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury covered |6.2.1 |a| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn o/s & n/s D bushes |5.3.4 |a| |i|| | 1 |
| Fuel system component leaking excessively or a risk of fire Top of engine area (6.1.3 (b) (ii)) | 1 |
| Offside Front Brake disc significantly and obviously worn inner face (1.1.14 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` debris on top of dash board |8.3.1b| | 1 |
| Offside Front Body has a sharp edge caused by corrosion of body |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body hindge |6.1.B.2| | 1 |
| Seat belt damaged sufficient to obstruct correct operation of the belt middle buckle not there |5.2.2a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill,step,back of cab and outrigger near step (5.3.6 (a) (i)) | 1 |
| Nearside Front Floor in such a condition it is likely to cause load insecurity or instability tipper body floor area holed (6.2.4 (a) (ii)) | 1 |
| Offside Front Floor in such a condition it is likely to cause load insecurity or instability tipper body floor area holed (6.2.4 (a) (ii)) | 1 |
| Offside Front Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
| Front Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper section of inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Road wheel badly distorted outer rim heavily damaged (5.2.2 (c) (i)) | 1 |
| Nearside Rear Lower Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Rear Lower Outline marker lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working and lamp unit transposing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working and lamp unit transposing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower turret (5.3.6 (a) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn Both rear (5.3.4 (a) (i)) | 1 |
| Offside Rear Body panel damaged and likely to cause injury Rear mud guard |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced footstep (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced footstep (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Seen through wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis under bonnet (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre x member corroded x4 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill ,floor |5.3.6 |a| |i|| | 1 |
| Fuel tank so insecure there is a risk of fire |6.1.3 |a| |ii|| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor corroded |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step corroded |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |link | |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure bolt missing |2.4.G.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member at tank area has three holes due to corrosion |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above and behind fuel tank area |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all crossmembers have holes and corrosion within prescribed areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Rear reflector missing lens missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Body has a projection caused by damage BUMPER |6.1.C.1| | 1 |
| Emissions not tested no oil (8.2.2.2 (e)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced behind drivers seat (7.1.1 (a) (i)) | 1 |
| Nearside Front Brake performance not tested burst brake pipe (1.2.1 (g)) | 1 |
| Offside Front Brake pedal anti-slip provision worn smooth worn through to metal |3.3.A.1b| | 1 |
| Nearside Front Body has a projection caused by damage fuel flap does not close |flapping open| |6.1.C.1| | 1 |
| Central Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Cross members 2no. above rear propshaft welds hidden by black rubber sillicone.marked areas with yellow chalk. |6.1.B.2| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings behind spring hanger chassis corroded and holed |metal plate hanging off| not welded in situate. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Recovery vehicle platform not enough securing brackets
to hold secure to main frame. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Recovery platform not enough securing brackets to hold platform to main chassis frame. |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Recovery platform frame securing bracket bolts missing. |6.1.B.2| | 1 |
| Central Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Recovery extension ramps not secure to platform, held in situate at the rear end of the recovery frame, by frayed winch rope, if winch rope burst recovery ramps would fall off the end of the frame. |6.1.B.2| | 1 |
| Nearside Front Brake hose inappropriately repaired hose insecure |3.6.A.3| | 1 |
| Body has a sharp edge caused by corrosion tipper body in dangerous condition |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis cross members x 2 holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step floor |6.1.B.2| | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chalked |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases insecure at joint |7.1.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cable mounting point |3.1.9| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member by rear spring mounts (5.3.6 (a) (i)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by rear brake hose fixing (5.3.6 (a) (i)) | 1 |
| Nearside Front Fuel tank insecure fuel tank strap corroded off |7.2.1| | 1 |
| Offside Front Brake pedal anti-slip provision worn smooth rubber pad |3.3.A.1b| | 1 |
| Offside Rear Body insecure |6.2.2 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated badly corroded at seat mounting |6.2.4 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch panel |5.3.6 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury sill at step |6.2.1 |a| |i|| | 1 |
| Offside Front Body panel corroded and likely to cause injury sill at step |6.2.1 |a| |i|| | 1 |
| Rear Oil leaking excessively from transmission diff corroded |8.4.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases tail and centre |7.1.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab side step |5.2.6| | 1 |
| Offside Power steering pipe|s| or hose|s| leaking from a joint near steering rack |2.3.3b| | 1 |
| Nearside Front Upper Front position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Front Upper Front position lamp|s| missing |1.1.A.3a| | 1 |
| Suspension component mounting prescribed area is excessively corroded crossmember at nsr spring hanger |2.4.A.3| | 1 |
| Emissions not tested excessive black smoke when checked |7.3.A.1| | 1 |
| Front Position lamp not working both sides |4.2.1 |a| |ii|| | 1 |
| Rear Position lamp missing both sides |4.2.1 |a| |ii|| | 1 |
| Outline marker lamp not working both roof markers |4.2.1 |a| |ii|| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour white light on |reverse| |1.1.A.3e| | 1 |
| Exhaust has a major leak of exhaust gases also insecure at centre |7.1.2| | 1 |
| Central Suspension component mounting prescribed area is excessively corroded central chassis piece |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/lower inner arch |6.1.B.2| | 1 |
| Front Prop shaft bearing excessively worn front center bearing (6.1.7 (b) (i)) | 1 |
| Oil leaking excessively from engine sump (8.4.1 (a) (i)) | 1 |
| Offside Front Service brake lagging in operation 51% |1.2.1 |d|| | 1 |
| Offside Front Service brake lagging in operation 56% (1.2.1 (d)) | 1 |
| Offside Front Upper Position lamp not working cab light (4.2.1 (a) (ii)) | 1 |
| Nearside Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 1 |
| Nearside Front Upper Outline marker lamp missing lens cover (4.2.1 (a) (ii)) | 1 |
| Rear position lamp|s| not working both side |1.1.A.3b| | 1 |
| Power steering pipe/hose leaking from rack |2.1.5 |a|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top /inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back of sill to step (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rale 2 places (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rale under side |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel housing |6.1.1 |c| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor (7.1.1 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel wheel cylinder (1.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Dropside likely to become detached rear mtg. section detached from main assy.. |6.2.1 |a| |ii|| | 1 |
| Nearside Body component damaged and likely to cause injury storage box broken.sharp edges. wooden floor insecure likely to fly out |6.2.1 |a| |i|| | 1 |
| Fuel system component leaking top off engine |7.2.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis box section in engine bay |2.4.A.3| | 1 |
| Offside Rear Body component insecure wheel arch panel |6.2.1 |a| |i|| | 1 |
| Nearside Headlamp not working on main beam and offside |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light lens |1.2.1e| | 1 |
| Nearside Headlamp aim beam image obviously incorrect pattern not clear - aim not tested |1.8.A.1b| | 1 |
| Anti-roll bar insecure nearside rear drop link |2.4.G.1| | 1 |
| Fuel pipe union leaking on pump |6.1.3 |b| |i|| | 1 |
| Anti-roll bar linkage insecure nearside rear linkage - top bolt missing |2.4.G.1| | 1 |
| Anti-roll bar linkage insecure offside rear linkage - lower nut insecure |2.4.G.1| | 1 |
| Offside Brake cable insecure (1.1.15 (c)) | 1 |
| Exhaust has a major leak of exhaust gases 1st exhaust box (6.1.2 (a)) | 1 |
| Nearside Rear Brake cable inappropriately repaired cable fouling wheel. |3.5.1n| | 1 |
| Offside Rear Upper Brake pipe inadequately clipped flex pipe |3.6.B.1| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings seat mounting |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings two x-members at handbrake mountings |6.1.B.2| | 1 |
| Nearside Rear Body component likely to become detached wheel arch |6.2.1 |a| |ii|| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp divider missing |1.2.1f| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis rail / subframe mounting (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis cross-member / tipper mounting cross-member (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front of rear chassis cross-member (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of rear chassis cross-member (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6| | 1 |
| Rear Prop shaft bearing excessively worn rear support bearing (6.1.7 (b) (i)) | 1 |
| Fuel tank insecure rear strap corroded/broken (6.1.3 (a) (i)) | 1 |
| Exhaust system insecure refit (6.1.2 (a)) | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing retighten |2.4.G.2| | 1 |
| Offside Front Obligatory mirror insecure refit (3.3 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases center box |7.1.2| | 1 |
| rear brake recording little or no effort suspect load valve, put cable tie round it it and both wheels lock |3.7.B.5a| | 1 |
| Prop shaft bearing excessively worn Second centre bearing (6.1.7 (b) (i)) | 1 |
| Centre Rear Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan behind seat |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner drop sill |5.2.6| | 1 |
| Nearside Rear Outer Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross-member near nearside rear leaf spring front bracket (marked with yellow chalk) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn maybe nut loose (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill Corroded + Holed In Various Places (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door Step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch/ Body (Marked in Yellow Chalk) (6.1.1 (c) (i)) | 1 |
| Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement rear anti roll bar d bushes |2.4.G.2| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear drop links |2.4.G.2| | 1 |
| Offside Rear position lamp|s| incorrect colour broken lense |1.1.A.3e| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded Centre crossmember |1.1.21 |e| |i|| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing nut missing. |2.4.G.2| | 1 |
| Nearside Rear Shock absorber has an excessively worn bush lower bush. |2.7.4| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Nearside Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember behind axle. |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossbrace |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded rear of chassis cab |5.2.6| | 1 |
| Anti-roll bar pin or bush excessively worn both rear d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Upper Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Rear Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush o/s and n/s |2.4.G.2| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn wish bone |5.3.4 |a| |i|| | 1 |
| Front Brake pipe inadequately supported all ones under bonnet!! |3.6.B.1| | 1 |
| Nearside Front Vehicle Identification Number not legible (0.2 (b)) | 1 |
| Nearside Front Vehicle Identification Number not legible Plate scratched off / Nearside Door shut (0.2 (b)) | 1 |
| Offside Rear Outline marker lamp missing Rear Light missing (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Brake load sensing valve inoperative and ABS not fitted or inoperative Load Sensing Valve Held up with cable tie (1.1.17 (c) (ii)) | 1 |
| Nearside Front Lower Macpherson strut ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Macpherson strut ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar ball joint excessively worn both rear (5.3.4 (a) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross members both have rust hole in them (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step X2 (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Front position lamp|s| not working x2 |1.1.A.3b| | 1 |
| Offside Rear Body insecure and dangerous to other road users wing insecure |6.1.B.1b| | 1 |
| Nearside Rear Brake pipe inadequately clipped hose |3.6.B.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded cross member behind cab |5.2.6| | 1 |
| Front Upper Position lamp not working both top marker lamps (4.2.1 (a) (ii)) | 1 |
| Nearside front brake binding Binding slow to react |3.7.B.1| | 1 |
| Power steering component|s| leaking from a failed seal Steering rack leaking |2.3.3b| | 1 |
| Front position lamp|s| not working both front upper |1.1.A.3b| | 1 |
| Nearside Rear Brake lining(s) missing hold down pins missing (1.1.13 (c)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror (6.2.1 (a) (i)) | 1 |
| Exhaust fumes causing a danger to health of persons on board rear of engine (6.1.2 (b) (ii)) | 1 |
| Offside Rear Upper Anti-roll bar attachment bracket/mounting missing bolt missing (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting insecure bolt loose (5.3.3 (a) (i)) | 1 |
| Nearside Body mounting fixings missing bolts x 3 missing (6.2.2 (c) (i)) | 1 |
| Nearside Rear Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
| Anti-roll bar attachment bracket/mounting insecure both rear drop link lower mounts |5.3.3 |a| |i|| | 1 |
| Outline marker lamp missing both rear |4.2.1 |a|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Center beam (6.1.1 (c) (i)) | 1 |
| Emissions not tested ***NOT ABLE TO OPEN BONNET TO CHECK OIL AND WATER TO CARRY OUT TEST WITHOUT CAUSING ENGINE DAMAGE*** (8.2.2.2 (e)) | 1 |
| Bonnet primary retaining device ineffective ***BONNET NOT OPENING*** (3.1 (c)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Front suspension arm, rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage pin or bush excessively worn *Possibly Upper bolt loose* (5.3.4 (a) (i)) | 1 |
| Nearside Rear Torque/reaction arm insecure |2.4.G.1| | 1 |
| Emissions not tested Filled workshop with smoke & soot |8.2.2.2 |e|| | 1 |
| Offside Rear Torque/reaction arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/ doorstep (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Front suspension ball joint dust cover missing |2.4.G.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded cable mounting crossmember in middle |3.1.9| | 1 |
| Offside Rear Lower Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Direction indicator incorrect colour lens broken |1.4.A.2f| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush anti roll bar hole elongated |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inside door shut/sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis area,on top of chassis leg |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar linkage insecure nearside and offside |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg,suframe mounting |5.3.6 |a| |i|| | 1 |
| Offside Body insecure and dangerous to other road users Side panel insecure |6.1.B.1b| | 1 |
| Electrical wiring insecure Ignition barrel faulty |1.9.2a| | 1 |
| Fuel system component leaking Around fuel pump |7.2.3| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle Hoses fouling exhaust |2.3.2| | 1 |
| Offside Rear Body insecure and dangerous to other road users Side panel |6.1.B.1b| | 1 |
| Central Exhaust has a major leak of exhaust gases Insecure |7.1.2| | 1 |
| Offside Front Inner Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp ind/stop light (4.2.3 (c)) | 1 |
| Offside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn lower bush - possibly just needs tightening (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch - as marked (5.3.6 (a) (i)) | 1 |
| Nearside Obligatory mirror missing glass missing (3.3 (a)) | 1 |
| Offside Body has a projection caused by damage mirror |6.1.C.1| | 1 |
| Brake pipe inadequately supported master cylinder to nearside |3.6.B.1| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wheel arch |3.6.C.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension turret (5.3.6 (a) (i)) | 1 |
| Fuel pipe leaking filler/breather pipes |6.1.3 |b| |i|| | 1 |
| Nearside Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both sides marked in yellow (6.2.2 (d) (i)) | 1 |
| Central Rear Brake hose twisted |3.6.B.4c| | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt Bottom ball joint (5.3.4 (b) (ii)) | 1 |
| Offside Inner Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Offside Front Service brake excessively binding binds for aprox 1 min after releasing the brake pedal |1.2.1 |f|| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn front (5.3.4 (a) (i)) | 1 |
| Front Upper All outline marker lamps not working offside and nearside (4.2.1 (a) (ii)) | 1 |
| Stop lamp not working 2 sides |1.2.1b| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush 2 sides |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear silencer split |7.1.2| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour lenz brocken. |1.1.A.3e| | 1 |
| Nearside Front Upper Position lamp not working roof light (4.2.1 (a) (ii)) | 1 |
| Offside Front Upper Position lamp not working roof light (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch several holes marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis front inner wheel arch hole marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / step marked in yellow (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step marked in yellow (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Outer Body mounting fixings insecure such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush D bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength crossmember holed |2.4.A.3| | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn Arm rear bush |5.3.4 |a| |i|| | 1 |
| Track rod end ball joint has excessive play Both |2.1.3 |b| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting n/s/f wing (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting rear sill by seat (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Brake load sensing valve inoperative but ABS functioning bracket insecure (1.1.17 (c) (i)) | 1 |
| Position lamp switch insecure (4.2.2 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected subframe mount (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember at spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember at spring mount (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember from side to side (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength at drop link mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab rear holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body component insecure mud flap (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body mounting fixings insecure (6.2.2 (c) (i)) | 1 |
| Offside Rear Body mounting fixings insecure (6.2.2 (c) (i)) | 1 |
| Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Prop shaft flexible coupling excessively deteriorated centre rear propshaft bearing (6.1.7 (d) (i)) | 1 |
| Steering retaining device insecure steering rack pinch bolt loose |2.2.C.1g| | 1 |
| Nearside Brake cable damaged broken cable (1.1.15 (a)) | 1 |
| Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both central cross members (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NSFinner sill/inner wheel arch/back of cab /OSF inner sill/osf outer sill/osf inner wheel arch (6.1.1 (c) (i)) | 1 |
| Prop shaft bearing excessively worn both centre bearings |6.1.7 |b| |i|| | 1 |
| Rear Body panel corroded and likely to cause injury tail gate,jagged edge |6.2.1 |a| |i|| | 1 |
| Central Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member (1.1.21 (e) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step/inner sill (7.1.1 (a) (i)) | 1 |
| Central Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body structure/crossmember near rear of tank (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides of chassis at rear shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides of chassis at rear shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing rear bush |2.5.B.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor by seat mount |5.2.6| | 1 |
| Nearside Ball joint has excessive play Steering rack end |2.2.B.1f| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear sill |6.1.B.2| | 1 |
| Front Body component insecure PANNEL (6.2.1 (a) (i)) | 1 |
| Steering wheel has movement relative to the column such that there is a serious risk of detachment (2.2.1 (a) (ii)) | 1 |
| Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear Anti-roll bar insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn Drop link |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn Drop link |5.3.4 |a| |i|| | 1 |
| Oil leaking excessively from transmission Gearbox |8.4.1 |a| |i|| | 1 |
| Rear Stop lamp not working Both rear |1.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/outrigger |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering CHASSIS by brake compensator |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by bump stop |6.1.B.2| | 1 |
| Rear Brake load sensing valve inoperative part missing |3.6.E.3| | 1 |
| Nearside Rear Leaf spring to axle securing bolt missing |u bolt| chalked up |2.4.B.7b| | 1 |
| Offside Rear Leaf spring to axle securing bolt insecure |u bolt| chalked up |2.4.B.7b| | 1 |
| Offside Rear Leaf spring to axle securing nut missing |u bolt| chalked up |2.4.B.7b| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded Rack to pump |2.3.2| | 1 |
| Offside Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering SILL |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering SILL |6.1.A.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30 cm of shock absorber mounting |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch by suspension leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected OUTRIGGER END (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch 2 places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill front leaf spring mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inside cab (7.1.1 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i)) | 1 |
| Bonnet retaining device excessively deteriorated cant open the bonnet |8.4.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured inner and outer wheel arch is torn and holed |5.2.6| | 1 |
| Nearside Front Inner Statutory seat belt missing seat belt buckle missing or hidden under stuff. |5.1.1| | 1 |
| Offside Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings lower rear of cab |6.1.B.2| | 1 |
| Fuel system component leaking at engine |7.2.3| | 1 |
| Bonnet retaining device excessively deteriorated doesnt open |8.4.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear chassis |6.1.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp all back lights have a bad earth |1.1.A.3f| | 1 |
| Offside Front Anti-roll bar fractured snapped and link missing |2.4.G.1| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch marked yellow |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch marked yellow
|2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded full sill |2.4.A.3| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all light affected |1.4.A.2h| | 1 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn prob bearing |2.4.G.4d| | 1 |
| Offside Power steering ram|s| has excessive free play between ball-pin and valve and separation is likely |2.3.5| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded step/inner sill |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch / floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step/inner sill |7.1.1 |a| |i|| | 1 |
| Offside Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock area |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Brake performance not tested pipe burst |1.2.1 |g|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassis inner and outer both sides |6.1.1 |c| |i|| | 1 |
| Nearside Inner Front brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Front Lower Front suspension has excessive play in an lower ball joint |2.5.B.1a| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner under bonnent |6.1.1 |c| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured eye |5.3.1 |b| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases no emission test |6.1.2 |a|| | 1 |
| Nearside Front Inner Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2| | 1 |
| Exhaust system not adequately supported part of tailpipe missing |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring shackle area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring shackle area |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mounting areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting areas |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded +offside front upper arch x4 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mounting bracket+outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis between leaf springs |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis between leaf spring split and corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis by load sensor |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis split |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis to arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded inner sill to chassis |2.4.A.3| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill to chassis |6.1.A.1| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed and corroded by spring hanger |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill holed and corroded by spring mount rear |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step to chassi |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill /step |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill & arch |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill below sliding door |6.1.B.2| | 1 |
| Brake pump drive belt excessively deteriorated |3.6.F.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring hangers /outriggers /chassis / floor to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill /quater panel /outer sill/ outriggers / inner arch/inner sill ends (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep upper and underneath separate bits |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded where wheel arch joins body inner and outer ,and both sides of ns chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis ,behind front spring hanger |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases middle |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch shock mount |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage door mirror housing |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by damage door mirror housing |6.1.C.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg outer edge |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal rack area |2.3.3b| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill as marked |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill middle as marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced leaf spring mount as marked |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced above bump stop as marked |6.1.1 |b| |ii|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced above bump stop as marked |6.1.1 |b| |ii|| | 1 |
| Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced as marked |6.1.1 |b| |ii|| | 1 |
| Offside Stop lamp insecure |1.3.2d| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded leaf spring |2.4.A.3| | 1 |
| Front Lower Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
| Stop lamp not working ALL!!!! |1.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket! |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s and n/s several places |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting o/s and n/s |6.6.6| | 1 |
| Prop shaft joint so worn it is likely to fail bolt missing from prop |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner flitch |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cill and inner arch |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded CHASSIS + STEP |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded floor to arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded floor to front and rear of arch |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch area |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner wheel arch area |6.2.2 |d| |ii|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Both rear chassis area corroded |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER REAR WHEEL ARCH/FLOOR AREA |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis / near anchor point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner body / wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner body / near shackle bracket |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket mount |2.4.A.3| | 1 |
| Rear Inner Suspension spring mounting prescribed area is excessively corroded both quarters |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded outer wheel arch both sides |2.4.A.3| | 1 |
| Nearside Front Brake load sensing valve seized to rear |3.6.E.3| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch front and rear |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch front and rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner and top |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shock mount |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center sill |6.1.B.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill has 2 holes |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill has 3 holes |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill has 2 holes |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill has 3 holes |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch has 2 holes |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch 3 holes |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch 2 holes |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 holes |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill 2 holes |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 holes |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion door |6.1.C.1| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BY BRAKE LIMITER VALVE |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS BY BRAKE LIMITER VALVE |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS RAIL UNDER BONNET |6.1.B.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill inner and outer (6.2.2 (d) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill inner and outer (6.2.2 (d) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired arch (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired arch (6.2.2 (d) (ii)) | 1 |
| Power steering malfunctioning excessive oil leak from steering rack |2.3.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded At spring turret |2.4.A.3| | 1 |
| Rear Brake pipe inadequately supported Rear cross member excessively corroded |3.6.B.1| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both chassis behind front wheels (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner arches (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis , around engine mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis multiple places (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Prop shaft bearing excessively worn second centre bearing |6.1.7 |b| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced upper & lower parts of step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected chassis cross member, close to leaf spring mount |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected chassis cross member, close to leaf spring mount & close to spare wheel |5.3.6 |a| |ii|| | 1 |
| Offside Rear Rear position lamp|s| not working tailight |1.1.A.3b| | 1 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt wishbone ball joint gaiter |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under front cross member |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers rear of cab |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger rear of cab |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step by seat mounting |5.2.6| | 1 |
| Offside Front Body has a sharp edge caused by damage windscreen cover panel |6.1.C.1| | 1 |
| Offside Front Inner Subframe mounting prescribed area is inadequately repaired chassis, welds incomplete |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmembers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill several |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded in engine bay next to engine mounting |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch near gearbox mounting |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn loose (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner bay (5.3.6 (a) (i)) | 1 |
| Offside Power steering component leaking steering rack area |2.1.5 |a|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Prop shaft flexible coupling excessively deteriorated prop centre rubber mounting |6.1.7 |d| |i|| | 1 |
| Nearside Front brake disc locking device insecure bolts missing |3.5.1l| | 1 |
| Offside Front brake disc locking device missing bolts missing |3.5.1l| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced underbody/doorstep |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced underbody/doorstep |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded underbody sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill behind wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill behind wheel |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step and floor |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step |7.1.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury wing and inner and outer sills |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear spring hangers (5.3.6 (a) (i)) | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded end of sill/inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near spring hanger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded back of sill |2.4.A.3| | 1 |
| Offside Rear brake caliper has restricted free movement |3.5.1k| | 1 |
| Stop lamp not working all stop lamps not working |1.2.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/paneling/inner paneling near spring anchor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/paneling near spring anchor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch near shock absorber top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch near shock absorber top mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch holes near strut turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch/inside turret holes (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed . through wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/panel near spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Box section near spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded side step |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded side step |5.2.6| | 1 |
| Shock absorbers has a serious fluid leak both rear (5.3.2 (b)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30cm of drivers seat mounting |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside the wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inside the wheel arch |6.1.B.2| | 1 |
| Nearside Front Shock absorber insecure It`s bent |2.7.2b| | 1 |
| Front Brake disc significantly and obviously worn both excessively corroded and worn thin |1.1.14 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch effecting the strength of strut top mounting area |5.3.6 |a| |i|| | 1 |
| Electrical wiring deteriorated and bare wires exposed at horn |1.9.2c| | 1 |
| Front Position lamp not working and rears (4.2.1 (a) (ii)) | 1 |
| Offside Front Body panel damaged and likely to cause injury and head lamp mounting |6.2.1 |a| |i|| | 1 |
| Rear Halfshaft securing bolt loose excessive end float (6.1.7 (a) (i)) | 1 |
| Nearside Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury front + rear |6.2.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour white light hole in lens. |1.4.A.2f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rust within 30cm of rear of rear spring hanger + around spring. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rust hole in inner sill within 30cm of rear spring front spring bush. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rust holes within 30cm of shock absorber top mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rust hole within 30cm of shock absorber yop mount. |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper reinforcement |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both floors |6.1.B.2| | 1 |
| Nearside Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden bump stop missing |2.4.A.1b| | 1 |
| Stop lamp adversely affected by the operation of another lamp bad earth on rear lights
|1.2.1f| | 1 |
| Offside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Suspension has inadequate clearance with the bump stop bump stop missing |2.4.A.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near shackell mounting |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear |2.4.A.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded sill x2 |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wheelarch |2.4.A.3| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under brake master cylinder |6.1.1 |c| |i|| | 1 |
| Offside Front Windscreen wiper missing |3.4 |a|| | 1 |
| Offside Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability support bushes (5.3.3 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch within strut top mount area (5.3.6 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal |6.2.2 |d| |i|| | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
| Nearside Headlamp not working on dipped beam (1.7.5a) | 1 |
| Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both front outer sill |7.1.1 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering where handbrake cable is |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Lower Rear reflector missing |1.5.1a| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at front spring eye (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired at front spring eye (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting damaged and seriously weakened rear (5.3.3 (b) (i)) | 1 |
| Offside Front Brake prescribed area is inadequately repaired and functionality of the braking system is affected brake hose insecure at fixing (1.1.21 (e) (ii)) | 1 |
| Offside Front Wheel nut(s) missing (4.2.A.1e) | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger mounting (5.3.6 (a) (i)) | 1 |
| Rear Passengers seat insecure complete row (6.2.6 (a) (ii)) | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Fuel cap/sealing device missing (7.2.4a) | 1 |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f) | 1 |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f) | 1 |
| All outline marker lamps not working (4.2.1 (a)) | 1 |
| Nearside Rear Brake pipe inadequately supported (3.6.B.1) | 1 |
| Nearside Front Brake pipe inadequately clipped (3.6.B.1) | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a) | 1 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Nearside Ball joint has excessive play Inner rack (2.2.B.1f) | 1 |
| Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f) | 1 |
| Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f) | 1 |
| Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp Flashes with indicator (1.1.A.3f) | 1 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush Rear bush (2.5.A.1c) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill area (2.4.A.3) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill area (2.4.A.3) | 1 |
| Power steering fluid level below minimum (2.3.1) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill (2.4.A.3) | 1 |
| Power steering pipe/hose leaking pipes leaking just before the steering rack (2.1.5 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength rear crossmember near leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill been plated but not been continuous weld around plate and still has holes (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Steering rack gaiter split (2.2.D.2d) | 1 |
| Nearside Rear Braking system leaking (3.6.A.1) | 1 |
| Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) | 1 |
| Steering rack gaiter split both (2.2.D.2d) | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Rear Brake load sensing valve linkage seized (3.6.E.3) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h) | 1 |
| Offside Front Steering system excessively rough (2.2.D.1) | 1 |
| Offside Front front brake juddering severely (3.7.A.2b) | 1 |
| Offside Front wheel bearing has excessive play (2.5.A.3c) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front of rear spring inner and outer sill corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front of rear spring inner sill corroded and holed. (5.3.6 (a) (i)) | 1 |
| Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| Nearside Front Front wheel bearing rough when rotated (2.5.A.2) | 1 |
| Bonnet retaining device ineffective bonnet wont open |8.4.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front door step inside |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step underside |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep underside |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting front and rear badly corroded/detatched partially |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front and rear both badly corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring hanger badly corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded shock upper mounting inside wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch lower |2.4.A.3| | 1 |
| Offside Brake hydraulic reservoir excessively weakened by corrosion |3.6.A.2b| | 1 |
| Rear Brake actuating linkage mounting prescribed area is severely distorted |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch areas |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to floor (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x6 (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch / floor pan |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Body |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wing / Floor pan |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill end |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Centre Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inter arch |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage outer sill |6.1.C.1| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` MULTIPLE OBSTUCTIONS TO DRIVERS VIEW |8.3.1e| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL TO REAR OF DRIVERS DOOR |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Seat belt attachment fitting fractured |5.2.3| | 1 |
| Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded side panel front of wheel |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill and panel front of wheel |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill and side panel front of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/inner side panel and floor rear of wheel |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg has large holes where it joins to bulkhead and is badly corroded |2.4.A.3| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp bulb in wrong way round (4.2.3 (c)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users coolant |8.4.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded jacking point. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step weld separated from sill. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing. |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill under filler neck |6.1.1 |c| |i|| | 1 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| inner rack end |2.2.A.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outer upper wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by leaf spring |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger near spring shackle |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Rear Mechanical brake component securing device excessively deteriorated |3.5.1i| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings underneath van midways to the back nearside and offside chassis has been spot welded, inapproiately repaired, sealed in black substance. patch work welded and a very poor job. vehicle is not fitted to be road worthy |6.1.B.2| | 1 |
| Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting hole near rear leaf spring mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting several large holes inner wheel arch and inner sill areas (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in frame of vehicle (6.1.1 (c) (i)) | 1 |
| Nearside All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to quarter panel |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis to quarter panel panels detatched |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet |5.3.6 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing under bonnet (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength several places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing, rear section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing, front section (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing by strut top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under wing rear section (7.1.1 (a) (i)) | 1 |
| Fuel pipe leaking injector leak off pipe |7.2.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer cills (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer cills (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer cills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer cills (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill panel inner/outer |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint Bottom |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area marked in white |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area marked in white |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area marked in white |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area marked in white |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked in white |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked in white the mount it self |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine bay marked in white |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded engine bay marked in white |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail inner marked in white near engine mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber area and chassis rail all marked in white |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber area and chassis rail all marked in white
load sensing valve area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded body corner marked in white |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded body corner marked in white |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step area inner door |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill step area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Leaf spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill - centre |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| passenger door cannot be opened from outside the vehicle |Bonnet| does not open |6.2.B.1c| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring hanger area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember hanger area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember hanger area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward bush |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear bush |2.4.A.3| | 1 |
| Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Emissions not tested aux belt braking up |7.3.A.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring cupling (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leaf spring coupling (6.1.1 (c) (i)) | 1 |
| Rear Hydraulic brake cylinder leaking hydraulic fluid brake compensator (1.1.16 (b) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre sill |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Track rod end ball joint has excessive play front o/s outer track rod end worn (2.1.3 (b) (i)) | 1 |
| Nearside Inner Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Inner Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by spring hanger (6.1.1 (c) (i)) | 1 |
| Fuel tank insecure front tank strap missing (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked |5.3.6 |a| |i|| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb shield missing ? |1.8.A.1b| | 1 |
| Nearside Rear Valve stem seriously damaged leaking when touched |4.1.D.1e| | 1 |
| Nearside Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member of |6.6.6| | 1 |
| Offside Brake pedal pad not secure to the pedal |3.3.A.1c| | 1 |
| Offside Front Electrical wiring likely to touch hot or rotating parts |4.11 |a| |iii|| | 1 |
| Offside Rear Anti-roll bar linkage worn and seriously weakened link |2.4.G.1| | 1 |
| Offside Front Suspension arm pin or bush excessively worn inner rear bush |5.3.4 |a| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r suspension mount area |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s centre inner and outer sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f outer sill |6.1.B.2| | 1 |
| Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings n/s/r upper shock absorber mount area |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner step sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner step sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch in several places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill end cap |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x/member |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to rear |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step/ sill |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded floor |3.1.9| | 1 |
| Nearside Front Ball joint has excessive play Steering rack inner |2.2.B.1f| | 1 |
| Offside Front Brake pipe excessively damaged to flexi (1.1.11 (c)) | 1 |
| Nearside Front Inner Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Offside Front Inner Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Braking system leaking brake pipe union to wheel cylinder |3.6.A.1| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill in front of rear wheel. |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Seat belt retracting mechanism defective Drivers (7.1.2 (e)) | 1 |
| Fuel tank insecure strap broke |7.2.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded doorstep underneath |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill all along |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill all along |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded at middle |2.4.A.3| | 1 |
| Offside Rear Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch marked |5.3.6 |a| |i|| | 1 |
| Front Front position lamp|s| not working sidelights both |1.1.A.3b| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired sill by sliding door |2.4.A.3| | 1 |
| Nearside Body has a projection caused by corrosion inner sill |6.1.C.1| | 1 |
| Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor/arch marked (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor/arch marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step marked (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member section under bumper (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner section under bumper (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch and floor section (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch and floor section (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section off chassis (6.2.2 (d) (i)) | 1 |
| Offside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis and fletch section (6.2.2 (d) (i)) | 1 |
| Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Body has a projection caused by corrosion corner bumper insecure |6.1.C.1| | 1 |
| Power steering component|s| leaking rack neck leaking |2.3.3b| | 1 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chaissis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded back sill |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Nearside front brakes release unevenly bind |3.7.B.4| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing under wheelarch |2.4.A.3| | 1 |
| Braking system leaking master cylinder |3.6.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step near the out rigger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill in various places between out riggers |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to out rigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to out rigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch near the out rigger |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near the out riger |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in various places near the out rigger |6.1.B.2| | 1 |
| Nearside Front Brake lining|s| insecure crumbling due to excessive heat |3.5.1g| | 1 |
| Offside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement D-Bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement D-Bush |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint likely to become detached Link loose. |5.3.4 |a| |ii|| | 1 |
| Nearside Front Suspension component pin or bush excessively worn Rear wishbone bush. |5.3.4 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both centre inner/outer sills holed/corroded |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer box section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer box section |5.3.6 |a| |i|| | 1 |
| Body component corroded and likely to cause injury both inner/outer sills/foot steps corroded |6.2.1 |a| |i|| | 1 |
| Emissions not tested no oil on dip stick |7.4.B.1| | 1 |
| Centre Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings handbrake cable bracket |6.1.B.2| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded cross-member |2.4.A.3| | 1 |
| Nearside Inner Rear Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Offside Inner Rear Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing |2.5.B.1a| | 1 |
| Nearside Rear Lower All position lamps not in good working order |function impaired| |1.1.A.2a| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step box corroded |6.2.2 |d| |i|| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded 1/4 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor near shocker mount |2.4.A.3| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step |6.1.1 |c| |i|| | 1 |
| Parking brake lever inoperative front cable broken (1.1.6 (d)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s /f inner wing o/s inner sill middle upper outer sill n/s (6.1.1 (c) (i)) | 1 |
| Offside Rear Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Offside Front position lamp|s| not working side |1.1.A.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor near shock mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above axle |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near shock mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension turret |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension turret |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Bottom ball joint |5.3.4 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r chassis near rear spring shackle mounting 3 points
of serious corrosion as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/top shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount/previous repair |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings from above under bonnet |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings from above under bonnet |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill in multiple areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill in multiple area |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis to floor |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in multiple areas |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis in multiple areas |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner floor |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion centre inner sill |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a sharp edge caused by corrosion sill X2 |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to chassis in multiple areas |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis to floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to chassis |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to chassis |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Out Rigger |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Out Rigger |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner Wheel Arch |5.2.6| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Inner + outer sills |2.4.A.3| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sills front arches and rear arches are corroded |6.2.2 |d| |i|| | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sills front arches and rear arches are corroded |6.2.2 |d| |i|| | 1 |
| Rear Steering component mounting prescribed area is excessively corroded leaf spring mounting places corroded |2.1.2 |e| |i|| | 1 |
| Nearside Inner Vehicle structure has damage which adversely affects braking or steering sill under rear wheel arch |6.1.A.1| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER STEP |6.1.1 |c| |i|| | 1 |
| Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER ABOVE FUEL TANK |6.1.1 |c| |i|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn BOTH |5.3.4 |a| |i|| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced jagged edges |1.7.5a| | 1 |
| Nearside rear brake recording little or no effort handbrake |3.7.B.5a| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/door (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above tank (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above tank (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above brake pipes (6.1.1 (c) (i)) | 1 |
| Brake pedal has insufficient reserve travel brake pedal creeping under pressure (1.1.2 (a)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step as marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x3 as marked |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 as marked |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch as marked |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x 2 as marked |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill as marked |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x3 |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step x2
|6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger
|6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg
|6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x3 holes |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch x2 holes |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outrigger |6.1.A.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded heel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch x2 holes |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp hazards / indicators & brake lights |1.1.A.3f| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp hazards / indicators & brake lights |1.1.A.3f| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area`s |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch area`s |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area`s shock mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear box section area`s |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front box section / inner wheel arch area`s |2.4.A.3| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush both inner D bushes |2.4.G.2| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush both sides - outer links |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring hanger area (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear suspension mount area (5.3.6 (a) (ii)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner and outer sills on both sides from front to rear |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner wheel arches |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear inner wheel arches |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both chassis legs from front to rear |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underbody of vehicle on both sides at front middle and rear |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near bumper |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sills |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear sills |6.1.B.2| | 1 |
| Offside Rear Upper Exhaust system insecure (6.1.2 (a)) | 1 |
| Central Rear Floor excessively deteriorated step (6.2.4 (a) (i)) | 1 |
| Nearside Front Body insecure and dangerous to other road users bumper corner pannel |6.1.B.1b| | 1 |
| Offside Outer Rear Anti-roll bar severely distorted |2.4.G.1| | 1 |
| Front Headlamp aim projected beam image is obviously incorrect both sides (4.1.2 (c)) | 1 |
| Front Headlamp aim not tested both sides (4.1.2 (b)) | 1 |
| Prop shaft bearing excessively worn Both bearing..
Front and back (6.1.7 (b) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced B pillar next to door catch (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced B pillar next to door catch (7.1.1 (a) (i)) | 1 |
| Fuel system component leaking on the top of the engine (6.1.3 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step to sill (7.1.1 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Rear Rear reflector more than 50% obscured |1.5.1b| | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror (6.2.1 (a) (i)) | 1 |
| Offside Front Anti-lock braking system wheel speed sensor excessively damaged |1.6 |c|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre cross member |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis through inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil holed |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area holed |6.1.B.2| | 1 |
| Centre Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement bearing |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis section (5.3.6 (a) (i)) | 1 |
| Rear Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn propshaft mount |2.4.G.4d| | 1 |
| Nearside Suspension has inadequate clearance with the bump stop bump stop adrift |2.4.A.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mounting point |2.4.A.3| | 1 |
| Nearside Adjustable towbar locating pin insecure |6.6.5a| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner wheel arch holed |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s outer sill holed |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s outer sill holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s inner sill holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f chassis leg holed |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s floor holed |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s floor holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r inner wheel arch holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner wheel arch holed |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded n/s/r chassis holed by leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded o/s/r chassis leg holed by leaf spring |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r side panel holed |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded flitch panel |2.4.A.3| | 1 |
| Offside Front Drivers seat insecure bolt s missing (6.2.5 (a) (ii)) | 1 |
| Offside Front Lower Dropside component corroded and likely to cause injury tie down hook area corroded |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossmember near drop link |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear crossmember near droplink |2.4.A.3| | 1 |
| Electrical wiring damaged, likely to cause a short under steering wheel to the right |1.9.2b| | 1 |
| Electrical wiring insecure wires to horn |1.9.2a| | 1 |
| Central Rear Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL AREA |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded INNER DOORSTEP AREA |5.2.6| | 1 |
| Fuel tank insecure Strap excessively corroded |7.2.1| | 1 |
| Fuel tank insecure tank straps corroded |7.2.1| | 1 |
| Nearside Seat belt adjustment fitting badly deteriorated |5.2.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s o/s front to rear |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s n/s outter and inner front steps |5.2.6| | 1 |
| Steering system excessively tight o/s n/s top strut bearings |2.2.D.1| | 1 |
| Nearside Front Body has a sharp edge caused by damage bumper loose |6.1.C.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s rear inner wheel arches corroded too many to put down all marked |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s rear floor numorouse places |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded o/s n/s front inner wheel arches in numerous place too many to put down |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s o/s front to rear inner sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s rear bottom valance |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s rear chassy rusted away |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s front floors |2.4.A.3| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel filter area |8.4.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill step corroded and holed |5.2.6| | 1 |
| Fuel pipe leaking Under bonnet |7.2.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Rear |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Rear |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Corroded NS and os chassis |6.1.A.1| | 1 |
| Central Front Suspension component mounting prescribed area is excessively corroded Shock mount |2.4.A.3| | 1 |
| Offside Power steering pipe|s| or hose|s| fouling other parts of the vehicle Osf hose insecure |2.3.2| | 1 |
| Offside Body has a sharp edge caused by damage Mirror danaged |6.1.C.1| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp pulsing with indicator |1.1.A.3f| | 1 |
| Central Rear Statutory seat belt of the wrong type. |5.1.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer door step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch, at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section |multiple holes| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded corner |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corner |2.4.A.3| | 1 |
| Front Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded n/s sill |5.2.6| | 1 |
| Nearside Inner Front Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Outer Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded brake hose/pipe mounting area |3.1.9| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened leaf spring mounting area |2.4.B.6d| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened leaf spring mounting area |2.4.B.6d| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis rails |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill area corroded |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired nearside step |5.2.6| | 1 |
| Suspension component mounting prescribed area is inadequately repaired nearside fixed shackle - several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside fixed shackle - several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired nearside swing shackle - several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired offside swing shackle - several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired nearside inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted outrigger |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front outer step/sill |5.2.6| | 1 |
| Steering component mounting prescribed area is excessively corroded floor near column fixing |2.2.C.1h| | 1 |
| Nearside Anti-roll bar linkage has excessive play in a pin/bush nut and bolt loose |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside fixed shackle - chassis, inner sill, outer sill, inner arch |in several places| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside fixed shackle - chassis, inner sill, outer sill, inner arch - in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside swing shackle - chassis, back panel, side panel, inner arch in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside swing shackle - chassis, back panel, side panel - in several places |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside inn er arch - front sub |2.4.A.3| | 1 |
| Front position lamp|s| not working n/s and o/s |1.1.A.3b| | 1 |
| Nearside Front Brake hose leaking on an air braking system |1.1.12 |c| |i|| | 1 |
| Nearside Passengers seat with a defective structure (6.2.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper of body door frame (6.2.2 (d) (i)) | 1 |
| Central Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside of sil (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting of outer sil (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in from of lamp (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting excessive corrosion around offside of body door frame (6.2.2 (d) (i)) | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp postion light goes out when footbrake is applied (4.2.3 (c)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside of step well (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear leaf spring front anchorage point (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leaf spring swinging shackle anchorage point (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s of spare wheel location load bearing beam (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing&floor |2.4.A.3| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis |3.3.A.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipping body chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipping body chassis |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/door shut |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing/wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing /wheel arch |2.4.A.3| | 1 |
| Offside Front Seat belt flexible stalk damaged stalk missing (7.1.2 (b) (i)) | 1 |
| Battery insecure and likely to cause a short circuit under drivers seat insecure (4.13 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected strut top[ area not welded in places (5.3.6 (a) (ii)) | 1 |
| Service brake effort inadequate at a wheel Both rear (1.2.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch area - chalked (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under step area (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassy in bulkhead |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/n/s inner wheel archs |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s n/s front to rear chassy |2.4.A.3| | 1 |
| Offside Rear Stop lamp adversely affected by the operation of another lamp side light brighter than brake light |1.2.1f| | 1 |
| Offside Front Body component corroded and likely to cause injury wing corroded and holed |6.2.1 |a| |i|| | 1 |
| Nearside Front Lower Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and doorstep holed |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to doorstep and doorstep corroded and holed |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to bulkhead in inner arch corroded and holed near to rear of subframe |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded and holed in strut turret by outer face of coil spring , not visible on under bonnet due to airbox |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to bulkhead area just rear of front strut turret |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit 2.09 mean recorded , manufacturers plate limit is 1.19 . (8.2.2.2 (a)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under bonnet next to gearbox mounting |6.1.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Leaf spring area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner outer sill has holes due to corrosion (6.2.2 (d) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sill has holes due to corrosion (6.2.2 (d) (ii)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides inner arches (6.1.1 (c) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired both sides prescribed areas (6.2.2 (d) (ii)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back panel (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded outer sill both side |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer riggar (6.2.2 (d) (i)) | 1 |
| Nearside Inner Rear Upper Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Brake pipe excessively damaged fouling alternator |1.1.11 |c|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around spring hanger |6.1.1 |c| |ii|| | 1 |
| Front Service brake excessively fluctuating n/s and o/s |1.2.1 |e|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected WHEEL ARCH (5.3.6 (a) (ii)) | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected SPRING HANGER (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING HANGER (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected WHEEL ARCH (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front to leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/ step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all body has |6.1.B.2| | 1 |
| Offside Front Obligatory mirror seriously obscured affecting the rear view lens damaged |8.1.2a| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp unit has bad earth or contact, also lens damaged |1.1.A.3f| | 1 |
| Offside Front Body component corroded and likely to cause injury Wheel Arch |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill with in 30cm of front spring mount. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill inner outer |2.4.A.3| | 1 |
| Fuel system component leaking tank hose |7.2.3| | 1 |
| Fuel system component insecure fuel tank |7.2.1| | 1 |
| Headlamp not working on dipped beam NEARSIDE AND OFFSIDE |4.1.1 |a| |ii|| | 1 |
| Rear Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear outriggers |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine bay both sides |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cabstep |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill various places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis various places |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outriggers various places |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner arches various places |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis inside arches |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inside arch |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded drivers step |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded centre outrigger |3.1.9| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill inside door (7.1.1 (a) (i)) | 1 |
| Anti-roll bar linkage ball joint excessively worn both rear (5.3.4 (a) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn both rear (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre floor (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis various places (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre outriggers various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step |underside| |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill is corroded |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front mtg corroded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mtg corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front mtg corroded |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear mtg corroded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Shock absorbers likely to become detached Chassis corroded |5.3.2 |a| |ii|| | 1 |
| Rear Brake prescribed area is excessively corroded compensator mtg |1.1.21 |e| |i|| | 1 |
| Rear Seat belt locking mechanism does not secure or release centre stalk missing |5.2.5a| | 1 |
| Offside Anti-roll bar rubber bush deteriorated resulting in excessive movement 7 nearside block bushes on rear axle |2.4.G.2| | 1 |
| Outer Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member above rear axle holed |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing by suspension mount holed |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing holed by suspension mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded top of sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing hole |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired finish weld areas |2.4.A.3| | 1 |
| Nearside Rear Body insecure and dangerous to other road users 2 brackets missing on body |6.1.B.1b| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded middle cross member has hole |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill inner door post |5.2.6| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Rear Body insecure and dangerous to other road users chassis on body has lots corrosion and holes |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users post corrosion and cracking on tale gate s |6.1.B.1b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmembers x2 (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill step (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn n/s and o/s d bushes |5.3.4 |a| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside drivers door shut |6.1.B.2| | 1 |
| Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and offside
in front of rear wheel |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel well (5.3.6 (a) (i)) | 1 |
| Body has a sharp edge caused by damage o/s n/s mirror cover missing |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s n/s mid sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside and offside front inner arch |2.4.A.3| | 1 |
| Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt arside and offside front lower |2.4.G.2| | 1 |
| Front Electrical wiring insecure behind bumper |1.9.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sills |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner sills |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch floor to wheel well |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch wheel well to floor |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear of inner arch to floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of inner arch to floor |2.4.A.3| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion arch |6.1.C.1| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear on to crossmember by shackle mount (5.3.6 (a) (i)) | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle fluid reservoir insecure |2.3.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near step |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around top of shock |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around brake valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor wheel arch section |6.1.B.2| | 1 |
| Front Track rod end ball pin shank loose both |2.2.B.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to load valve |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| brake disc locking device insecure |3.5.1l| | 1 |
| Brake pipe leaking on an air braking system pipe to load sensing valve (1.1.11 (b) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury door pillar........ (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury wing....... (6.2.1 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing....... (6.2.1 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill top....... (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill....... (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill....... (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure modified such that structural rigidity is significantly reduced chassis at subframe mounting has been cut....... (6.1.1 (d) (i)) | 1 |
| Offside Electrical wiring likely to touch hot or rotating parts fouling exhaust........ (4.11 (a) (iii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing....... (6.1.1 (c) (i)) | 1 |
| Nearside Front Wheel bearing rough when rotated also slight play......... (5.1.3 (b) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill area x 2 |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wing area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out-rigger / inner wing area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is inadequately repaired sill area / patch not fully welded |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded step area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured by bump stop |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage insecure bolt loose |2.4.G.1| | 1 |
| Nearside Front Upper Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded near chassis |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded w/arch area |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded shackle pin area |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several holes in inner & outer sills, inner wheel arch & inner wing |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several holes in inner & outer sills, inner wheel arch & inner wing |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch several places |2.4.A.3| | 1 |
| Offside Side repeater incorrect colour lens missing (4.4.3 (a)) | 1 |
| Offside Outline marker lamp not working and insecure (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working roof lamp (4.2.1 (a) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill to door step |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills, offside rear inner door shut and front step (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced where engine mount cross member mounted (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings tipper body mounting |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body mount x2 |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion bumper insecure due to corrosion |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill x2 |5.2.6| | 1 |
| front brake binding both fronts |3.7.B.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various holes on cills marked in yellow |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings various holes in cills marked in yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing marked in yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed marked in yellow |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around engine mt marked in yellow |6.1.B.2| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn back wishbone bush (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis leg, top corroded as you look down under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis leg, top as you look down from under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror head (6.2.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength upper section of chassis leg by bulkhead (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at rear (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at rear (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/quarter panel front of rear spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/quarter panel front of rear spring eye (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i)) | 1 |
| Brake pipe connection leaking on a hydraulic braking system front brake pipes on bulkhead (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of rear spring box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of rear spring box section (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing excessively worn rear support bearing rear shaft (6.1.7 (b) (i)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp affected by side lights |1.2.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member behind rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member in front of rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member behind rear spring mount |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2| | 1 |
| Offside Rear Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Chassis excessively corroded marked in yellow |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Chassis excessively corroded marked in yellow |5.2.6| | 1 |
| passenger door cannot be opened from outside the vehicle Nearside |6.2.B.1c| | 1 |
| Body has a sharp edge caused by damage Front offside |6.1.C.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has hole |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumper |6.1.B.2| | 1 |
| Offside Rear Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Upper Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inside and outside the whole way along (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis, visible from inside wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure is deformed and structural rigidity is significantly reduced chassis directly on top of axle (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill, |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both front inner + outer sills / inner door steps / inner wheel arches |7.1.1 |a| |i|| | 1 |
| Nearside Front Fuel tank insecure STRAP CORRODED |7.2.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering TOP CHASSIS UNDER BONNET |6.1.A.1| | 1 |
| Central Vehicle structure has excessive corrosion which adversely affects braking or steering MAIN CHASSIS FRONT OS REAR SPRING MOUNT |6.1.A.1| | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering CROSSMEMBER FRONT OF SPARE WHEEL |6.1.A.1| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER OUTER SILL STEP |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bump stop and above |6.1.1 |c| |i|| | 1 |
| Oil leaking excessively from engine oil pressure switch |8.4.1 |a| |i|| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded door pillar |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting underside of vehicle |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inside edge of wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded door steep |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under passenger seat |5.2.6| | 1 |
| Direction indicator not working Offside front |1.4.A.2c| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Both rear inner and outer sills |2.4.A.3| | 1 |
| Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Both front |2.4.G.2| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc Offside |2.5.C.1a| | 1 |
| Ball joint has excessive play Near side rack joint |2.2.B.1f| | 1 |
| Offside Outer Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step/inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step/ inner sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by upper shock mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area, strut mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger, near front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill/arch holed |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area by top mount |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner top mount area |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear inner sill |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area, front of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area, front and rear of wheel arch. (5.3.6 (a) (i)) | 1 |
| Nearside Ball joint has excessive play steering rack |2.2.B.1f| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Offside rear chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Nearside inner sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Nearside rear chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Offside chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Nearside chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill |2.4.A.3| | 1 |
| Nearside Outer Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Outer Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body floor |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers under body |6.1.B.2| | 1 |
| Body has a sharp edge caused by damage n/s/r wheel arch |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion o/s r wheel arch rotton |6.1.C.1| | 1 |
| Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
| Offside Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step - as marked |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill and out rigger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill behind wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill behind wheel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill - as marked |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill - as marked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill - as marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill - as marked |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill - as marked |6.1.B.2| | 1 |
| Nearside Front Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength After Spring x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer |6.1.A.1| | 1 |
| Exhaust emissions exceed manufacturers specified limit Plate 1.19
reading 6.64 (8.2.2.2 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under side (6.1.1 (c) (i)) | 1 |
| Offside Front Drivers seat insecure floor corroded (6.2.5 (a) (ii)) | 1 |
| Rear Service brake has no recorded effort at a wheel both sides (1.2.1 (a) (ii)) | 1 |
| Nearside Lower Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch corrosion 30 30 cm of sub frame mounting point (6.1.1 (c) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rust hole at o/s/r |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired both doorstep undersills (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired floor / inner flitch (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is inadequately repaired both doorstep under sills (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner flitch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner flitches (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/ close to a rear seat belt mounting |6.1.B.2| | 1 |
| Nearside Front Anti-lock braking system component excessively damaged (1.6 (e)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2| | 1 |
| Offside Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill in 2x places (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis holed by spring |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner archx2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount area [front mount area] (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swinging shackle area (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar fractured broken (5.3.3 (b) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Rear sill |5.2.6| | 1 |
| Centre Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded ABOVE AXLE |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/S INNER WING |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S CHASSIS BY FUEL TANK |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance broken and has a sharp edge |1.1.A.3d| | 1 |
| Front Bonnet retaining device ineffective can not open |8.4.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear and center sill |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring hanger mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front spring hanger mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger mounting |2.4.A.3| | 1 |
| Nearside Inner Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch and chassis |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is severely distorted step |5.2.6| | 1 |
| Fluid leak harmful to the environment or a risk to other road users |8.4.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch as marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch as marked |5.3.6 |a| |i|| | 1 |
| Central Fuel cap/sealing device mounting flange/sealing method defective fuel cap unable to be removed |7.2.4c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of the rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of the rear spring |2.4.A.3| | 1 |
| Offside Upper engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
| Offside Front Lower Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Nearside Front suspension has excessive play in a pin or bush of an upper wishbone inner bearing |2.5.B.1a| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step x2 |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member x2 |6.1.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both rear d bushes |2.4.G.2| | 1 |
| Centre Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis in the engine bay |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis/ out rigger near foot well |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out riggers front and rear of spring mounting and into the wheel arches seriously corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer near shock absorber mounting and brake load valve |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis out riggers near spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rigger near shackles mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis out rigged corroded near shackle mount |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded chassis corroded near shackles mount and exhaust hanger |2.4.A.3| | 1 |
| Additional braking device inoperative brake compensator valve seized |1.5 |b|| | 1 |
| Offside Power steering component leaking pinion seal (2.1.5 (a)) | 1 |
| Offside Power steering component leaking steering rack (2.1.5 (a)) | 1 |
| Central Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction screen damaged on both sides |3.1 |a| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor step |6.1.B.2| | 1 |
| Offside Front Headlamp adversely affected by the operation of another lamp dip/main beam |1.7.5c| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch behind shock |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear outer sill holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail near shock and leaf spring mount |6.1.B.2| | 1 |
| Nearside Front Bumper insecure bumper corner insecure. (6.1.4 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing corner corroded, holed and sharp. (6.2.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail holed by bump stop. big hole. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed near leaf spring shackle. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed. (5.3.6 (a) (i)) | 1 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen offside jet. (3.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch holed x2 places (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holed in x2 places. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed. (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed. (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch in 2 places |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch in 2 places |6.1.A.1| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings valance in 3 places |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering near engine mounting |6.1.A.1| | 1 |
| Offside Front Windscreen wiper control missing |8.2.1a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front chassis legs behind front wheels
|6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear chassis legs at rear spring mounts |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear out rigger |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills
|6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside chassis at fuel tank |6.1.B.2| | 1 |
| Body has a projection caused by corrosion front bumper insecure at nearside |6.1.C.1| | 1 |
| Offside Front brake caliper leaking caliper |3.6.A.1| | 1 |
| Offside Rear Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 1 |
| Rear Direction indicator not working both side |4.4.1 |a| |ii|| | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp reavers |1.3.2f| | 1 |
| Nearside Rear Brake valve corroded and excessively weakened chassis rail |3.6.A.2b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner and outer |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outer rear end |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner section |6.1.B.2| | 1 |
| Nearside Rear Upper Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f n/s/r chassis n/s/r n/s f outriggers o/s/r chassis n/sr chassis x member (6.1.1 (c) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger above spare wheel |6.1.B.2| | 1 |
| Fuel pipe leaking engine bay |7.2.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside (5.3.6 (a) (i)) | 1 |
| Rear Lower Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Rear Lower Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt INSECURE (6.1.7 (g) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt INSECURE (6.1.7 (g) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced STEP (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR BY SEAT BOLT (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength LOWER QUARTER (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR BY SHOCK ABSORBER (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG BEHIND WHEEL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis near brake load valve |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded of rear spring |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded of rear spring |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch/floorpan |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion side loading door lower cill panel |6.1.C.1| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded step/cill panel |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail under engine mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail around brake compensater (6.1.1 (c) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded crossmember both sides |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by step |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front and rear by leaf spring hanger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear jacking point and by leaf spring |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases flexy pipe |7.1.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch/floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to door step (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING AND CHASSIS (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced AT BUMP STOP AREA (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced AT BUMP STOP AREA (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn prop shaft bearing insecure |2.4.G.4d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded centre outrigger |2.4.A.3| | 1 |
| Front Fuel cap/sealing device missing |7.2.4a| | 1 |
| Rear Body has a sharp edge caused by corrosion guard missing |6.1.C.1| | 1 |
| Offside Front Outer Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Rear Brake pipe inadequately clipped both sides |3.6.B.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill |5.3.6 |a| |i|| | 1 |
| Nearside Lower Body component corroded and likely to cause injury outter sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger before axle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger after axle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger after axle |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded door step |underside| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger ( rearmost mount ) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Out rigger (rearmost mount ) (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg ( inner wheel arch ) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Inner sill ( Rearmost mount ) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Floor ( rearmost mount ) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rearmost mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel acrh (5.3.6 (a) (i)) | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s chassis fuel tank mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill & step |6.1.B.2| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Multiple places (6.2.2 (d) (i)) | 1 |
| Power steering ram insecure and steering adversely affected (2.1.5 (d) (ii)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear park brake cable mount |3.1.9| | 1 |
| Offside Rear Lower Tie bar/rod locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible spring displaced. (5.3.1 (a) (ii)) | 1 |
| Nearside Front Brake disc insecure mounting bolts missing (1.1.14 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step area (5.3.6 (a) (i)) | 1 |
| Offside Front Hydraulic brake calliper insecurely mounted calliper bolt loose (1.1.16 (c) (i)) | 1 |
| Offside Front Service brake excessively binding only on rollers with almost lock out after release (1.2.1 (f)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sil |6.1.B.2| | 1 |
| Central Prop shaft securing bolt missing |6.1.7 |a| |i|| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion left wing |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion right wing |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded off side door post bottom |5.2.6| | 1 |
| Nearside Rear Towbar mounting obviously of an inappropriate type |6.6.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step/cab areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step/cab areas |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Floor excessively deteriorated sill corrded |6.2.4 |a| |i|| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both links + both D bushes |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded lower inner panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded lower inner sill |2.4.A.3| | 1 |
| Brake pipe inadequately clipped from master cylinder |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in front of leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded behind leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded second outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lower panel at rear leaf spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor/inner arch |2.4.A.3| | 1 |
| Nearside Fuel tank insecure outrigger next to tank mounting corroded |7.2.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded spring hanger at front |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring hanger at rear mark in yellow |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded chassis leg mark in yellow |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill mark in yellow |2.4.A.3| | 1 |
| Offside Position lamp showing red light to the front |4.2.3 |a| |ii|| | 1 |
| Nearside Position lamp showing red light to the front |4.2.3 |a| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER ARCH |2.4.A.3| | 1 |
| Nearside Front Brake pipe inadequately clipped under bonnet |3.6.B.1| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension hanger corroded (6.1.1 (c) (i)) | 1 |
| Rear Position lamp not working all |4.2.1 |a|| | 1 |
| Power steering pipe/hose leaking steering rack |2.1.5 |a|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired step |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired step |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired antiroll bar link mount |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch x2 |6.1.A.1| | 1 |
| Nearside Outer Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Outer Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength DOOR STEP (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength DOOR STEP (5.3.6 (a) (i)) | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUT RIGGER WITHIN 30CM (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings close to rear spring rear eye |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded rack to pump |2.3.2| | 1 |
| Integral body structure has excessive corrosion which adversely affects braking or steering o/s sill |6.1.1 |c| |ii|| | 1 |
| Nearside Integral body structure has excessive corrosion which adversely affects braking or steering sill and rear of vehicle |6.1.1 |c| |ii|| | 1 |
| Front Windscreen wiper not working Both |3.4 |a|| | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CROSSMEMBER (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength UNDER BONNET (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT OF LEAF SPRING HANGER (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CROSSMEMBER THING (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded and offside |2.4.A.3| | 1 |
| Track rod end fractured and unserviceable both sides front
|2.2.C.1d| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r & o/s/r behind wheel |6.1.B.2| | 1 |
| Exhaust system not adequately supported front pipe to middle pipe |7.1.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/arch |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above axle |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / door shut by loading door |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg corroded and engine mount area weakened and engine has dropped lower by mount |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg both all sides to chassis leg |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area front side |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by leaf spring mounting area on both sides of the cross memeber |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back cross member corroded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by leaf spring mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member by leaf spring front mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area |6.1.B.2| | 1 |
| Exhaust system not adequately supported and has no tail pipe |7.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill marked yellow
|6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker marked yellow |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member marked yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch marked yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring marked yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings coil spring marked yellow |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle near diesel tank marked yellow |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill marked yellow |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch marked yellow |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch marked yellow |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch marked yellow |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Front pipe (6.1.2 (a)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill/door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill/door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn Drop link eye bush |5.3.4 |a| |i|| | 1 |
| Exhaust on a vehicle fitted with a diesel particulate filter emits visible smoke of any colour Black smoke |8.2.2.2 |d|| | 1 |
| Electrical wiring insecure and connectors likely to become disconnected Rear light clusters both sides (4.11 (a) (ii)) | 1 |
| Nearside Front Brake pipe excessively damaged to hose (1.1.11 (c)) | 1 |
| Offside Rear Leaf spring fractured Broken at front bush |2.4.B.1a| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Top strut mounting in inner wheel arch |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering n/s/f, o/s/f, n/s/r,o/s/r and lower |6.1.A.1| | 1 |
| Nearside Passenger`s seat insecure rear bolt sheared off |6.2.A.1| | 1 |
| Nearside Headlamp aim not tested due to headlight inop |1.8.A.1c| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outrigger |5.2.6| | 1 |
| Power steering component|s| leaking rack pinion |2.3.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded on out rigger and behind rear of rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded on out rigger and behind rear of rear spring mount |2.4.A.3| | 1 |
| Nearside Outer Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Hazard warning switch faulty ?? |1.4.B.1d| | 1 |
| Nearside Body insecure and dangerous to other road users load door |6.1.B.1b| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to load floor |2.4.A.3| | 1 |
| Power steering component|s| leaking rack body area |2.3.3b| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn prop shaft mount |2.4.G.4d| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER/ RAD /HORN /ECT |6.1.1 |c| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s inner sills |6.1.B.2| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside and nearside, marked yellow |6.1.1 |c| |i|| | 1 |
| Nearside Track rod end loose locking nut |2.2.B.1d| | 1 |
| Offside Track rod end loose locking nut |2.2.B.1d| | 1 |
| Steering component is not secure to the vehicle structure PAS FLUID RESERVOIR INSECURE. |2.2.B.1a| | 1 |
| Offside Front Body component corroded and likely to cause injury wing rusty and holed (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear shock absorber mount outer chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired floor to chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Chassis (within 30cm of front leaf spring mounting) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired Chassis (within 30cm of shock absorber mounting) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is inadequately repaired Chassis (within 30cm of brake load compensator) (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Chassis (within 30cm of shock absorber mounting) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Inner wheel arch (within 30cm of top spring mounting) (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded FRON AND MID WAY INNER SIL CORRODED IN 2 PLACES |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING AREA BY STRUT |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER SIL AREA |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded REAR OUTER WHEEL ARCH TO SIL |2.4.A.3| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced IN THREE PLACES CORRODED INNER WING AREA |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING AREA |6.1.1 |c| |i|| | 1 |
| Oil leaking excessively from engine Cover on timing chain end. (8.4.1 (a) (i)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear rubber bush |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear rubber bush |2.4.G.2| | 1 |
| Brake lever excessively corroded and seriously weakened |3.5.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x member at spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x member at spring mount |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x member and rear floor |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded fllor wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shackle mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured anchor eye (5.3.1 (b) (ii)) | 1 |
| Offside Front Suspension component insecure and impairing directional stability wishbone rear bush bolt |5.3.3 |a| |ii|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger - behind cab (6.1.1 (c) (i)) | 1 |
| Body insecure and dangerous to other road users (6.1.B.1b) | 1 |
| Rear Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Rear Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Anti-roll bar linkage insecure (2.4.G.1) | 1 |
| Nearside Front brake disc excessively pitted (3.5.1h) | 1 |
| Offside Front brake disc excessively scored (3.5.1h) | 1 |
| Nearside front brake juddering severely (3.7.A.2b) | 1 |
| Offside front brake juddering severely (3.7.A.2b) | 1 |
| Central Rear Seat belt not functioning as intended not secure at its fixing (7.1.2 (c)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded box section marked in yellow (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Front Lower Suspension arm pin or bush excessively worn both sides rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill by axle |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under step |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing in 2 places |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step |6.1.B.2| | 1 |
| Brake rod locking device missing |3.5.1l| | 1 |
| Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies |inner wing area| |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner + outer sill (7.1.1 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wings corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing in arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Front Engine mounting excessively loose (6.1.8 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch floor pan area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch box section next to leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner jacking point |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner jacking point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance are x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance area x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis area x2 |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r leaf spring area |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill x3 |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step area x3 |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch and floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded outer sillcorroded |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner sill area corroded |2.4.A.3| | 1 |
| Offside Front Drag link end ball joint has excessive play inner rack end joint worn |2.2.B.1f| | 1 |
| Front position lamp|s| not working Near side top |1.1.A.3b| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box section holed |2.4.A.3| | 1 |
| Nearside brake disc in such a condition that it is seriously weakened Front |3.5.1i| | 1 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint Centre |2.4.G.4b| | 1 |
| Nearside Front brake caliper has restricted free movement Binding on |3.5.1k| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 2 places (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp with side light |1.3.2f| | 1 |
| Offside Body has a sharp edge caused by corrosion side panel |6.1.C.1| | 1 |
| Offside Rear Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s front sill/step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front sill/step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front chassis under bonnet top of chassis/bulkhead (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front bulkhead/wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front inner flitch under wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/ rear of cab |6.1.1 |c| |i|| | 1 |
| Drivers seat with a defective structure insecure (6.2.5 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near engine crossmember mount (6.1.1 (c) (i)) | 1 |
| Offside Front Engine mounting bracket damaged or deteriorated resulting in excessive movement corroded crossmember (6.1.8 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/ step area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded within 30cm of nearside rear spring anchorage point |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering within 30cm of brake load sensor valve mounting point on chassis |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded within 30cm of lower seatbelt mounting point inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded within 30cm of lower seatbelt mounting point |5.2.6| | 1 |
| Offside Rear Passenger`s seat insecure excessive corrossion within 30cm of seat mounting point |6.2.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded within 30cm of rear shackle mounting point |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides |6.1.B.2| | 1 |
| Fuel system component leaking fuel pump area possible pipe or seal |7.2.3| | 1 |
| Nearside Rear Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis bracket |6.6.6| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting |6.6.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step x2 |5.3.6 |a| |i|| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section |6.1.1 |c| |i|| | 1 |
| Nearside Front Body panel corroded and likely to cause injury outersill |6.2.1 |a| |i|| | 1 |
| Offside Front Body component corroded and likely to cause injury body support corroded |6.2.1 |a| |i|| | 1 |
| Nearside Front Service brake lagging in operation rate of increase too slow |1.2.1 |d|| | 1 |
| Offside Rear Service brake lagging in operation rate of increase |1.2.1 |d|| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded turret |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill, inner, outer,step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Box section |6.1.B.2| | 1 |
| Front Headlamp not working on dipped beam Both front headlamps not working (4.1.1 (a) (ii)) | 1 |
| Rear Service brake excessively binding Both rear brake excessively binding (1.2.1 (f)) | 1 |
| Fuel tank insecure tank strap hanging (6.1.3 (a) (i)) | 1 |
| Nearside Front Inner Floor excessively deteriorated n/s/f doorstep to inner sill (6.2.4 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front leaf spring hanger |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded box sections |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded box sections |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wings |2.4.A.3| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting alone outer sill |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/chassis |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch/chassis |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnet |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under bonnet |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis /inner floor/spring hangar several holes |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis /spring hangar several holes |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill several holes |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill several holes |6.1.B.2| | 1 |
| Central Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed several places |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing strut mounting holed x 2 |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing strut mounting holed x2 |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corroded marked yellow |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded marked yellow |6.1.1 |c| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded center sill |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded footwell |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded footwell |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner cill |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
| Offside Front Upper Front position lamp|s| not working marker light |1.1.A.3b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill foot step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer foot step |6.1.B.2| | 1 |
| Rear Towbar component insecure towball |6.6.1| | 1 |
| Position lamp adversely affected by the operation of another lamp off side rear position lamp and stop lamp (4.2.3 (c)) | 1 |
| Fuel tank insecure front tank strap virtually rusted through (6.1.3 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outter sil |2.4.A.3| | 1 |
| Lower engine mounting deteriorated resulting in excessive movement gear box |6.1.D.1a| | 1 |
| Exhaust system insecure Centre Section |6.1.2 |a|| | 1 |
| Nearside Leaf spring slipper excessively worn |2.4.B.5| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill top |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear inner archs |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear inner and outer valances |2.4.A.3| | 1 |
| Front Bonnet retaining device excessively deteriorated bonnet release very stiff unable to open bonnet |8.4.2| | 1 |
| Rear Front passenger door does not latch securely closed rear doors wont latch securely |6.2.B.1a| | 1 |
| Nearside Rear Leaf spring shackle bracket fractured rear shackle |2.4.B.6b| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Area inside wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Area close to prescribed area inside wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced Area close to prescribed area inside wheel arch (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cill section excessively corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch, mounting plate area. |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch mounting plate area. |7.1.1 |a| |i|| | 1 |
| Nearside Front Direction indicators missing |1.4.A.2b| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Central Obligatory mirror missing |8.1.1| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 1 |
| Nearside Front Side repeater not working and o/s/f (4.4.1 (a) (ii)) | 1 |
| Front Headlamp switch faulty switching to high beam inop |1.7.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings passenger access step |6.1.B.2| | 1 |
| Offside Front Inner Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Road wheel spoke corroded |4.2.A.1b| | 1 |
| Nearside Front Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch area |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch area |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock mount |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger, and towbar mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step backing |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step backing |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint excessively worn drumstick |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt ball joint (5.3.4 (b) (ii)) | 1 |
| Offside Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle side loading| |6.2.B.1c| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting panel |6.6.6| | 1 |
| Offside Front Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6| | 1 |
| Offside Inner Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail behind headlight |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under drivers step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel arch |6.1.1 |c| |i|| | 1 |
| Brake performance not tested due o broken leaf spring |1.2.1 |g|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete outer sil |6.1.B.2| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sil complete |6.1.B.2| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner step |6.1.B.2| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Offside Front Body has a projection caused by damage side bumper insecure |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger near rear spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired out rigger near rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill | marked in yellow | |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR CROSS MEMBER NEAR SPRING HANGER O/S AND N/S .MARKED |6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings 1.REAR CROSS N/ S MEMBER NEAR REAR SPRING HANGER .2.REAR CROSS O/S MEMBER NEAR REAR SPRING HANGER |6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings OUT RIGGER FROM CHASSIS TO SILL .O/S AND N/S IN FRONT OF REAR AXLE. |6.1.B.2| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc O/S FRONT |2.5.C.1a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail sides above rear axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail sides above rear axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rust within 30cm of rear spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill are corroded within 30cm of nearside rear spring front mounting (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar insecurely attached |5.3.3 |a| |i|| | 1 |
| Nearside Body has a sharp edge caused by damage wing mirror backcover |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner doorstep |5.2.6| | 1 |
| Rear Prop shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp not in good working order affecting light output |1.2.4a| | 1 |
| Nearside Entrance/exit door emergency control inoperative |6.2.C.2| | 1 |
| Nearside Inner Entrance/exit step deteriorated to the extent that it is likely to be a trip hazard or cause injury. sill excessively corroded |6.1.E.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |inner wheel arch| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |inner wheel arch| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis above bump stop |2.4.A.3| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened front of rear mounted area |2.4.B.6d| | 1 |
| Offside Front Upper Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill /floor |2.4.A.3| | 1 |
| Rear Stop lamp not working all |1.2.1b| | 1 |
| Direction indicator flashing more than 120 times a minute both sides all lamps |1.4.A.2g| | 1 |
| Nearside Direction indicator not working repeator (4.4.1 (a) (ii)) | 1 |
| Front Power steering pipe/hose damaged such that the steering is adversely affected (2.1.5 (g) (ii)) | 1 |
| Offside Hazard warning lamps inoperative |4.4.1 |e|| | 1 |
| Rear fog lamp does not emit a steady red light showing white light to rear |4.5.4 |a|| | 1 |
| Offside Cab steps in such a condition that it is likely to cause injury corroded |6.2.8 |b|| | 1 |
| Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both |2.4.G.2| | 1 |
| Nearside Inner Front Fuel system component leaking |7.2.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded Before axle |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Before axle |2.4.A.3| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings CORNER |6.1.B.2| | 1 |
| Emissions not tested DUE TO SMOKE |7.3.A.1| | 1 |
| Nearside front brake binding after braking |3.7.B.1| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill to outer sill |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort 92kg/f |3.7.B.5a| | 1 |
| Offside Obligatory mirror missing mirror glass |8.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front spring mount/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front spring mount/chassis |2.4.A.3| | 1 |
| Rear Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator flashing more than 120 times a minute interaction with other lamps |1.4.A.2g| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal |6.1.B.2| | 1 |
| Nearside Rear Shock absorber has an excessively worn bush top and bottom bush worn |2.7.4| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed. |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor|step| holed. |5.2.6| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both ends of leaf spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch shock |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill end holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill end holed |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger mounting |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded undersill/step area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded undersill/step area |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor panel |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded behind wheel in two places |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded behind wheel |5.2.6| | 1 |
| Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Nearside Front Side repeater incomplete |1.5.1b| | 1 |
| Body has a sharp edge caused by damage nearside headlamp lens damaged |6.1.C.1| | 1 |
| Suspension arm pin or bush excessively worn Both front lower arm rear bushes (5.3.4 (a) (i)) | 1 |
| Lower Steering column flexible coupling has excessive play |2.1.5| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by rear spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30 cm of a seat mounting |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded holes in inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Seat base |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Seat base |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded front sub frame rear mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front sub frame rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear spring front mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear spring rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear spring rear mount |2.4.A.3| | 1 |
| Front Fuel system component leaking around fuel pump area |7.2.3| | 1 |
| Fuel system component leaking fuel pipe |7.2.3| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded inner wing panel behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill center to rear x3 areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded undersill/stepsill area |2.4.A.3| | 1 |
| Brake hydraulic reservoir fluid level dangerously low |3.6.C.1e| | 1 |
| Oil leaking excessively from engine looks like oil switch (8.4.1 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch / floor pan |2.4.A.3| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded offside |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Front mounting both sides |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded Shock mountings both sides |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Both sides |6.1.A.1| | 1 |
| Offside Inner Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Nearside Rear Upper Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Rear Axle swivel joint has excessive play in a swivel pin |2.5.A.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger by shock absorber mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor by shock absorber mounting |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded door step under vehicle |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded door step corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing under arch |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing under arch |2.4.A.3| | 1 |
| Fuel tank insecure fuel tank bracket deteriorated |7.2.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner and outer sill severall areas |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis in several places |3.1.9| | 1 |
| Speedometer clearly inoperative Acting as a rev counter monitoring engine speed not road speed. (7.8 (b) (ii)) | 1 |
| Engine MIL inoperative or indicates a malfunction inoperative (8.2.2.2 (g)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring hanger, multiple areas. (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced base of b pillar, sill, inner and outer. (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced base of b pillar, sill, inner and outer (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced front seat mounting, floor pan. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/crossmember |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded leaf spring front |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded leaf spring front |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded leaf spring rear |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded leaf spring rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember |both sides of spring| |2.4.A.3| | 1 |
| Offside Steering linkage ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` wipers parked part way up windscreen |8.3.1e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill under sill and outriggers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis by spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill under sill by spring anchor |2.4.A.3| | 1 |
| Nearside Lower engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded shackle bracket |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger |front marked| |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring shackle marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch chassis marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arch marked |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by the shocker |5.3.6 |a| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and step |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and step |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded steering column to steering rack joint area |2.2.C.1h| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings whole body corroded one for the scrappers |6.1.B.2| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Nearside Front Front passenger door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Body has a sharp edge caused by damage door mirror outer casing missing |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill as marked |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill as marked |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill as marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hangers in front and behind of leaf spring as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded hangers in front and behind of leaf spring as marked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg/ inner wing |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor has separated from sides around wheel arch |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor has separated from sides around wheel arch |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut turret corroded (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut turret corroded and front chassis to bulkhead (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step inner & outer |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner & outer step |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all |6.1.B.2| | 1 |
| Fuel system component leaking Injectors leaking |7.2.3| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Behind seat |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step panel |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg top |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill rear most of van |2.4.A.3| | 1 |
| Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion Wing. |6.1.C.1| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D-bushes |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill and access step |6.1.B.2| | 1 |
| Front Lower engine mounting bracket damaged and likely to fail structural cross member |6.1.D.1b| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced 2ND to rear cross member/chassis rail |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced 2ND to rear cross member/chassis rail |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Suspension arm insecurely attached rear bush |5.3.3 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wheel arch structure (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Nearside Outer Track rod end loose |2.2.B.1d| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear sills at spring mounts |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear chassis at shockabsorbers |2.4.A.3| | 1 |
| Steering component mounting prescribed area is excessively corroded various places |2.2.C.1h| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis x member |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Offside Body component corroded and likely to cause injury front of sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement R rubber |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement D rubber |2.4.G.2| | 1 |
| Rear Outline marker lamp missing both (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Brake master cylinder/servo mounting prescribed area is deliberately modified which significantly reduces the original strength |3.6.C.3| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp when indicator is operated |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded marked |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonett engine mount area x 3 |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of sill area |6.1.B.2| | 1 |
| Nearside Position lamp not working marker light (4.2.1 (a) (ii)) | 1 |
| Nearside Position lamp showing white light to the rear tail light lens cracked (4.2.3 (a) (ii)) | 1 |
| Offside Position lamp showing white light to the rear tail light lens damaged (4.2.3 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel (5.3.6 (a) (i)) | 1 |
| Nearside Position lamp not working x3 (4.2.1 (a) (ii)) | 1 |
| Offside Position lamp not working x4 (4.2.1 (a) (ii)) | 1 |
| Offside Rear Lower Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis front of leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rear of leaf spring |2.4.A.3| | 1 |
| Rear window|s| missing |6.9.2| | 1 |
| Subframe mounting prescribed area is excessively corroded both front chassis legs |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear leaf spring mounting areas |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both inner + outer sills |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis x3 places |2.4.A.3| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced chassis leg, visible under bonnet. Marked, yellow. (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, Visible from underside. Marked, yellow. (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x2 places (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bump stop missing (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bump stop missing (5.3.6 (a) (i)) | 1 |
| Front Brake disc significantly and obviously worn nearside and offside (1.1.14 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis behind wheel (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x3 places (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch x3 places (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting engine bay (6.2.2 (d) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected panel (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner bay x 1 |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner bay x2
|2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill - undersill holed
|2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill - undersill holed |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner bay holed
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner bay holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear spring mounts holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both |front of| rear spring mounts holed
|2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded all rear outriggers holed nearside and offside
|2.4.A.3| | 1 |
| Exhaust emissions - engine idle speed too high |8.2.1.2 |e|| | 1 |
| Offside Rear position lamp|s| not working too bright |1.1.A.3b| | 1 |
| Exhaust has a major leak of exhaust gases centre silencer cracked and blowing |7.1.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis next to shackle |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen Bulb fitted incorrectly |4.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis holed near rear Spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis holed near Spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top chassis |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 |6.1.B.2| | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users bulb insecure |1.8.A.1a| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger behind rear wheel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger behind rear wheel |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger behind rear wheel |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger in front of rear wheel |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger in front of rear wheel |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both sides rear by front and rear of leaf spring mounting points |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor by shock absorber |6.1.B.2| | 1 |
| Nearside Rear Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded front |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded lower sill holed |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded inner front of wheel arch holed. |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill holed |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded front of wheel arch holed. |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded very rear of inner lower sill/wheel arch holed . |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded rear crossmember upper and lower areas holed . |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired front and lower faces of rear crossmember plate coming away !!!. |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember in 4 places . |6.6.6| | 1 |
| Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting corner of sill area . |6.6.6| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded end of sill . |2.4.A.3| | 1 |
| Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis leg . holed next to flexi mounting . |3.6.C.3| | 1 |
| Offside Front Outer Brake master cylinder/servo mounting prescribed area is excessively corroded and under chassis rail holed next to flexi mounting . |3.6.C.3| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings face of chassis . |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step underneath in 2 places |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch in 3 places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch in 2 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shocker area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill/ arch |2.4.A.3| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp bad earth? |1.4.A.2h| | 1 |
| Headlamp aim beam image obviously incorrect n/s/f |1.8.A.1b| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt o/s/f lower |2.4.G.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s sill with in seat belt area/inner sill |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s outer sil |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s inner sil |7.1.1 |a| |i|| | 1 |
| Emissions not tested excessive smoke,blocking tester (8.2.2.2 (e)) | 1 |
| Axle has inadequate clearance with the bump stop both rear |2.4.A.1a| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine no read out blocked tester |7.4.B.3b| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at front spring hanger in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at front of spring hanger in various places |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis in various places |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill front to rear in various places |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill front to rear |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch in various places |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch in various places |2.4.A.3| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp incorrectly fitted |1.2.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger near spring front anchor mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected 3 locations all chalked |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock absorber mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength multiple locations all chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength multiple locations all chalked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded compensate valve mounting |1.1.21 |e| |i|| | 1 |
| Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed within 30 cm of suspension mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount holed and excessively corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg next to leaf spring |chalked| |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg next to leaf spring |chalked| |6.1.B.2| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step |chalked| |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |chalked| |5.2.6| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg next to gearbox |chalked| |6.1.B.2| | 1 |
| Emissions not tested due to condition of vehicle |7.4.B.1| | 1 |
| Brake performance not tested due to condition of vehicle |3.7.A.1| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect check bulb |4.1.2 |c|| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect check bulb |4.1.2 |c|| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp looks like bulb fitted wrong stop/side |1.2.1f| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt both (6.1.7 (g) (ii)) | 1 |
| Hazard warning lamps inoperative Works only the nearside |1.4.B.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Around engine mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front of rear spring |6.1.B.2| | 1 |
| Brake pedal spongy Servo assistance |3.3.B.1b| | 1 |
| Brake servo vacuum pipe collapsed |3.6.C.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner and outer sills corroded |2.4.A.3| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis/holed/corroded/bump/stops/missing |6.1.A.1| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/member/as/marked |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under/wing/holed/corroded |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength areas marked with yellow chalk |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength areas marked with yellow chalk |5.3.6 |a| |i|| | 1 |
| Offside Front engine mounting deteriorated resulting in excessive movement engine mtg insecure |6.1.D.1a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail holed and corroded to excess and engine mtg support callapsed |6.1.B.2| | 1 |
| Offside Rear Leaf spring eye defective |anchor| broken at rear spring eye |2.4.B.1b| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill within 30 cms of (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill within 30 cms of (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength backing sill within 30 cms of (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step within 30 cms of (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases section of the (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within 30 cms of (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger within 30 cms of (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger within 30 cms (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing within 30 cms of (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S rear wheel arch inner |6.1.1 |c| |i|| | 1 |
| Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt front |6.1.7 |g| |ii|| | 1 |
| Exhaust system not adequately supported new mount |7.1.1| | 1 |
| Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc new clip o/s |2.4.G.4e| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment adjust |1.1.6 |c|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner wings and floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor near shock |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to arch |5.3.6 |a| |i|| | 1 |
| Body has a projection caused by corrosion nearside outer sill |6.1.C.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear by shock absorber |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear by shock absorber |6.1.B.2| | 1 |
| Body has a projection caused by corrosion o/s/f inner wheel arch |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner sill |6.1.B.2| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded by leaf spring mount x2 |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Fuel pipe union leaking to injector (6.1.3 (b) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre rear chassis |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear most chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear chassis rail above centre of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion in offside front door step and sill to floor panel |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion in nearside front door step and sill to floor panel |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most chassis/outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most chassis/out rigger/inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in inside face (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inside face (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill - chalk marked |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch area - chalk marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch area - chalk marked |2.4.A.3| | 1 |
| Electronic stability system warning lamp does not illuminate hand brake warning light |3.4.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner flitch to floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner flitch to floor |2.4.A.3| | 1 |
| Central Rear Seat belt insecurely fixed to the vehicles structure seatbelt catch |5.2.1a| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release inner 1st row |5.2.5a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid and rear body |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body |6.1.B.2| | 1 |
| Power steering component leaking pump area |2.1.5 |a|| | 1 |
| Nearside Rear Position lamp showing white light to the rear Light lens damaged (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member excessively corroded within anti-roll bar link and body mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Brake prescribed area is excessively corroded Inner wing by flex hose mount (1.1.21 (e) (i)) | 1 |
| Offside Body has a sharp edge caused by damage Headlamp |6.1.C.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind wheel Arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In front of wheel Arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Upper Wheel Arch |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached bolt lose (5.3.3 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached bolt lose (5.3.3 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded foot well as marked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded next to prop mounting & hand brake cable area corroded |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded 30cm with in sub frame mounting |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded upper wheel arch |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion tipper body chassis |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded sill to floor corroded
|2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill to floor corroded |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| missing outer marker missing |1.1.A.3a| | 1 |
| Parking brake lever has no reserve travel due to snapped cable |3.1.6b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step backplate |5.2.6| | 1 |
| Central Brake cable has wires broken and is significantly weakened snapped |3.5.1b| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner side panel rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and inner side panel rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger front of wheel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing and floor |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger and innerwing rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured chassis leg |3.3.A.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheelarch |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Lower inner sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Anti roll bar link |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength As marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced As marked |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced As marked |7.1.1 |a| |i|| | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above propshaft |6.1.1 |c| |i|| | 1 |
| Inner Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Rear Fuel tank insecure tank strap excessive corrosion |7.2.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by rear of rear spring |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member by front of rear spring |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded cross member over axle |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch and chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger lower arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger inner lower arch 3 places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front hanger inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front hanger chassis corroded in 2 places |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded floor pan with brake compensator |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor within the shocker mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced above step (7.1.1 (a) (i)) | 1 |
| Offside Rear Oil leaking excessively from transmission wheel components leaking (8.4.1 (a) (i)) | 1 |
| Central Front Headlamp has a product on the light source so that the light output is severely reduced contamination inside light (4.1.4 (b)) | 1 |
| Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen washer spray on top of screen, adjustment required (3.5 (a)) | 1 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen washer spray on top of screen, adjustment required (3.5 (a)) | 1 |
| Rear Rear fog lamp not working no fog lamp fitted at rear (4.5.1 (a) (ii)) | 1 |
| Brake pedal anti-slip provision worn smooth worn and cut (1.1.2 (c)) | 1 |
| Offside Sub-frame attachment bracket/mounting insecure sub frame bolt loose |2.4.G.1| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush link |2.4.G.2| | 1 |
| Nearside Track rod end ball joint has excessive play inner rack |2.2.B.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis | behind cab| |5.2.6| | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake cable guide (1.1.21 (e) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/ chassis (5.3.6 (a) (i)) | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced engine support (6.1.1 (c) (i)) | 1 |
| Offside Rear position lamp|s| incorrect colour hole in glass shows white light |1.1.A.3e| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear tipper body both sides at pivot mounting points |6.1.B.2| | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both sides |2.4.G.2| | 1 |
| Front Brake disc significantly and obviously worn Inner face (1.1.14 (a) (i)) | 1 |
| Offside Inner Rear Rear fog lamp not working |1.3.2b| | 1 |
| Central Rear Drive shaft uj which forms part of the suspension has a loose flange bolt |2.4.G.4c| | 1 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering inner step |6.1.A.1| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x member both sides |6.1.B.2| | 1 |
| Central Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings 4th x member both sides |6.1.B.2| | 1 |
| Prop shaft bearing housing insecure most front |6.1.7 |f| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow chalk Wheel arch area (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced forward of crossmember (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor near step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember above axle (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength 3 places all chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength 3 places all chalked (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis top under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis top under bonnet (5.3.6 (a) (i)) | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis cross members (6.1.1 (c) (ii)) | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill has a hole (6.2.2 (d) (i)) | 1 |
| Offside Front Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced x2 (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength after wheel inner seal (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength after wheel behind bumper (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering BOTH REAR SIDES |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Vehicle structure is fractured and structural rigidity is significantly reduced SILL |6.1.1 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH RIGGERS |6.1.1 |c| |i|| | 1 |
| Emissions not tested EXCESSIVE BLACK SMOKE |8.2.2.2 |e|| | 1 |
| Nearside Front Upper Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Windscreen damaged and affecting the driver`s view of the road in zone b |3.2 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of main chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of main chassis |5.3.6 |a| |i|| | 1 |
| Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arches n/s and o/s (6.2.2 (d) (i)) | 1 |
| Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills n/s and o/s (6.2.2 (d) (i)) | 1 |
| Rear Position lamp not working n/s and o/s (4.2.1 (a) (ii)) | 1 |
| Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arches n/.s and o/s (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s and o/s (6.2.2 (d) (i)) | 1 |
| Stop lamp not working Nearside & Offside |1.2.1b| | 1 |
| Nearside Front front parking |secondary| brakes imbalanced |3.7.B.6b| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front and back |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front and back |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear spring mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component ball joint excessively worn bottom ball joint (5.3.4 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill corroded marked yellow |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill corroded marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill corroded marked yellow |6.1.B.2| | 1 |
| Offside Rear Outline marker lamp lens seriously defective (4.2.1 (b)) | 1 |
| Nearside Side repeater incorrect colour white (4.4.3 (a)) | 1 |
| Offside Body component damaged and likely to cause injury mirror mount broken (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch where it attaches to wing (6.1.1 (c) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired multiple places on load bed (6.2.2 (d) (ii)) | 1 |
| Central Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Cross member above brake pipes |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member securing brake flexi`s |6.1.1 |c| |i|| | 1 |
| Central Fuel pipe insecure |6.1.3 |a| |i|| | 1 |
| Stop lamp|s| not working both |4.3.1 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front outer rigger mounting area inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear outer rigger mounting area inner sill |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded main chassis by bump stop mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded main chassis by bump stop mounting area |2.4.A.3| | 1 |
| Exhaust emits excessive smoke or vapour of any colour also emission not tested |7.4.B.4| | 1 |
| engine mounting deteriorated resulting in excessive movement by gear box |6.1.D.1a| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering rear,center and front outer sill where marked, |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering rear outer sill where marked |6.1.A.1| | 1 |
| Offside Front Outer Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Brake pipe leaking this vehicle has no service brake |3.6.A.1| | 1 |
| Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Front Suspension arm ball joint excessively worn both |5.3.4 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel corroded by the rear road spring area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter panel corroded by the rear spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer body rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shock mount |2.4.A.3| | 1 |
| Entrance/exit door damaged and function impaired |6.2.C.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill/wheel arch and rear inner wing and x member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis by cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis shackle end (5.3.6 (a) (i)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror cover missing |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill x2 |5.3.6 |a| |i|| | 1 |
| Front Prop shaft securing bolt loose to UJ |6.1.7 |a| |i|| | 1 |
| Outline marker lamp not working N/S & O/S |4.2.1 |a|| | 1 |
| Stop lamp not working N/S & O/S |1.2.1b| | 1 |
| Offside Front wheel bearing rough when rotated and play |2.5.A.2| | 1 |
| Track rod end ball joint has excessive play N/S & O/S |2.2.B.1f| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced cill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected cracked lense (4.5.1 (b) (ii)) | 1 |
| Offside Outer Body mounting fixings insecure such that stability is seriously impaired the side (6.2.2 (c) (ii)) | 1 |
| Offside Inner Body mounting fixings insecure such that stability is seriously impaired (6.2.2 (c) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at bump stop (6.1.1 (c) (i)) | 1 |
| Front Fuel pipe union leaking |6.1.3 |b| |i|| | 1 |
| Nearside Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Offside Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Rear Exhaust system insecure rubber split |6.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wings |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corrosion within 30cm of a suspension mount. |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded n/s sill excessivly corroded within 30cm of a seatbelt mounting point |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded o/s/f sill excessively corroded within 30cm of a seatbelt mounting point. |5.2.6| | 1 |
| Nearside Rear Floor excessively deteriorated under vehicle (6.2.4 (a) (i)) | 1 |
| Nearside Inner Front Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced main chassis above rear axle |6.1.1 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill below fuel filler cap area |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r inner sill below rear spring hanger outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r rear spring hanger outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill
|5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill
|5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under driver`s step |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside 8 areas - all marked yellow (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside and offside rear - above rear axle (6.1.1 (c) (i)) | 1 |
| Suspension arm pin or bush excessively worn Nearside front arm - rear bush (5.3.4 (a) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor both sides wheel arch area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDER BONNET. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDER BONNET X2. (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH. (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced DOOR STEP. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS OUTRIGGER. (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS CENTRE OUTRIGGER. (6.1.1 (c) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footstep |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footstep |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner bay |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner bay |6.1.1 |c| |i|| | 1 |
| Nearside Rear Upper Leaf spring linkage pin not correctly positioned |2.4.B.3a| | 1 |
| Nearside Outer Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Outer Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Flitch |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s outer to inner sill |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s and o/s cross member |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s inner to outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/and o/s rear chassis x3 |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/f inner to outer sill |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s and o/s rear chassis in several areas |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis,rear spring |2.4.A.3| | 1 |
| Offside Rear Lower Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to fuel tank strap (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR HANGER (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leg near fuel tank (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassi leg near fuel tank (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocks mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake valve leaking (1.1.7 (d) (i)) | 1 |
| Nearside Rear Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder excessively weakened by corrosion leaking |1.1.16 |d| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Floor/inner wheel arch within 30cm of shock absorber mount |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded cross member near front leaf spring mount |2.4.A.3| | 1 |
| Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member |3.1.9| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is fractured chassis / brake vale mount |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mount, sill |2.4.A.3| | 1 |
| Offside Steering system excessively rough top strut bearing |2.2.D.1| | 1 |
| Nearside Steering system excessively rough top strut bearing |2.2.D.1| | 1 |
| Fuel system component leaking FUEL FILTER /PIPES |7.2.3| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL -3 PLACES |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL 2 PLACES |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL -BELOW STEP |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH 2 PLACES |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Offside Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Front Lower engine mounting deteriorated resulting in excessive movement gearbox |6.1.D.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring eye mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch chassie |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arche inner sill |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to jacking point |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg by leaf spring front fixing point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box section by leaf spring rear shackle fixing point |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury wing sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill at front below door step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill in centre (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at front (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill in centre (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring fixing area inner sill behind wheel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail above axle (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail above rear axle (6.1.1 (c) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded O/S/F INNER WING |YELLOWED| |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded N/S/F INNER WING |YELLOWED| |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion N/S/F WING |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded O/S CAB LOWER CORNER AREA |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting point out rigger (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis near tow bar x2 |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring shackle |6.1.B.2| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BOTH INNER AND OUTER SILLS. (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH AREA. (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH AREA. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner/outersill |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis and inner wing (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis and inner wing (6.1.1 (c) (ii)) | 1 |
| Offside Front position lamp|s| incorrect colour lens damaged |1.1.A.3e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring mounting inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength various places (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Brake valve leaking brake compensator |3.6.A.1| | 1 |
| Central engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Front Seat belt webbing significantly weakened drivers seat belt (7.1.2 (b) (ii)) | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded innersill/ lower wheel arch |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp with a multiple light source more than 1/2 not functioning (4.5.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength drop sill near rear spring front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp brake light (4.2.3 (c)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring eye |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush backward |2.4.G.2| | 1 |
| Offside Rear Suspension arm has excessive play in a pin/bush backward |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded ancore |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded front & rear mounts |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is inadequately repaired mounts |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and centre sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis by suspension leg (5.3.6 (a) (i)) | 1 |
| Offside Track rod end seriously misaligned (2.1.3 (e)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sill |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner an outer sill |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner an outer sill |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner an outer sill |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis rail |2.4.A.3| | 1 |
| Exhaust system not adequately supported cat to centre box |7.1.1| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting chassis cross member |6.1.6 |i| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis cross member |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside rear cross member |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Offside front chassis rail |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded chassis rail by fuel tank |5.2.6| | 1 |
| Offside Front Brake pipe inadequately clipped copper to flexy |3.6.B.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis within 30cm of shock absorber top fixing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis within 30cm of shock absorber top fixing |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill within 30cm of rear spring front mounting |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired inner + outer sill |5.3.6 |a| |i|| | 1 |
| Rear Exhaust system insecure mountings broken (6.1.2 (a)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer + inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp both |1.4.A.2h| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp Strobing/bad earth |4.2.3 |c|| | 1 |
| Fuel system component leaking injector leak off |7.2.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger foremost |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan / inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush On Axle |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush On Axle |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar has excessive play in a pin/bush Drop Link |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As Marked |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor As Marked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor As Marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As Marked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As Marked |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings As Marked |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger As Marked |6.1.B.2| | 1 |
| Offside Rear Headlamp lens seriously defective Indicator lens cracked emitting white light to rear |4.1.1 |b| |ii|| | 1 |
| Fuel system component leaking filter |7.2.3| | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both rear D bushes (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both rear link bushes (5.3.4 (a) (i)) | 1 |
| Offside Outer Front Driver`s door hinge missing |6.2.B.2| | 1 |
| Nearside Front Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
| Nearside Front Upper Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill/ step area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/ inner sill area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front to rear, inner and outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front to rear, inner and outer sill |6.1.B.2| | 1 |
| Offside Rear Upper Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Passenger`s seat insecure seat mounting corrsion |6.2.A.1| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced step |7.1.1 |a| |i|| | 1 |
| Oil leaking excessively from engine vacume pump |8.4.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Body has a sharp edge caused by damage light unit
|6.1.C.1| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal
|6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut mounting marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member marked with yellow chalk |2.4.A.3| | 1 |
| front brakes release unevenly offside slow releasing |3.7.B.4| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis inner and outer marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer chassis marked with yellow chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at front of rear spring marked with yellow chalk |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch and offside |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch and offside |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear panel |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Rear Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Body has a sharp edge caused by corrosion both rear inner arch |6.1.C.1| | 1 |
| Front Headlamp are incorrectly positioned Both sides (4.1.4 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill and inner chassis rail |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill and inner chassis rail |2.4.A.3| | 1 |
| Offside Rear Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer wheel arch/inner wing (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear bush |2.5.A.1c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount, both inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount, both inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mount, inner chassis rail |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis to floor |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has a fracture which adversely affects braking or steering wing |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under sill 3 x places |6.1.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch &sill area |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch & sill area |6.1.C.1| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced sill area length |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area length |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area length |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area length |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leaf spring mounting areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leaf spring mount areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie area rear leaf spring mount to floor areas to chassie |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie areas to floor rear leaf spring mount areas |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength length of inner sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength length of inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie to sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie to sill area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch areas under wing |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing arch wheel arch underside |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel areas under wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch areas |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several areas |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced several areas |6.1.1 |c| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired inner sill and inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Passenger`s seat with a defective structure |6.2.6 |a| |i|| | 1 |
| Centre Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint 2nd |2.4.G.4b| | 1 |
| Nearside Fuel cap/sealing device does not fasten securely maintaining pressure on the sealing arrangement |6.7.2a| | 1 |
| Nearside Rear Seat belt insecurely fixed to the vehicle structure |5.1.B.2a| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear mount on wishbone |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring support |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear quarter |2.4.A.3| | 1 |
| Nearside Stop lamp not working and offside |1.2.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around outrigger and leaf spring mounting (5.3.6 (a) (i)) | 1 |
| Central engine mounting deteriorated resulting in excessive movement uner |6.1.D.1a| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid door sill |6.1.B.2| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect bulb loose (4.1.2 (c)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill by sliding door |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill whole length |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded various places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded various places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting various places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring mounting various places |2.4.A.3| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 1 |
| Rear Exhaust system not adequately supported loose and insecure |7.1.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded flooring around seat mounting |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount areas of corrosion |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded main frame |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center |6.1.B.2| | 1 |
| Integral body structure is fractured and structural rigidity is significantly reduced Both rear chassis corroded (6.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced Chassis corroded inner wheel arch (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sil |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2| | 1 |
| Nearside Outline marker lamp not working side centre lamp |4.2.1 |a|| | 1 |
| Offside Seat belt anchorage prescribed area is fractured door pillar /striker plate fractured |5.2.6| | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn Rearmost - deteriorated and allowing excessive movement |5.3.4 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Rails Nearside and Offside Above Rear Axle |6.1.1 |c| |i|| | 1 |
| Steering column universal joint locking device missing |2.1.6| | 1 |
| Nearside Headlamp light source and lamp not compatible led bulb fitted (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible led bulb fitted (4.1.4 (c)) | 1 |
| Suspension arm rubber bush bonding deteriorated resulting in excessive movement o/s + n/s/f wishbone rear bushes |2.4.G.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r by rear spring |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r chassis x 4 |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f door step |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r inner w arch |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/inner sill/step |7.1.1 |a| |i|| | 1 |
| Prop shaft securing bolt loose front section joining bolt |6.1.7 |a| |i|| | 1 |
| Offside Rear Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust system not adequately supported REAR MOUNTING RUBBERS SPLIT |7.1.1| | 1 |
| Nearside Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Front Service brake excessively fluctuating both |1.2.1 |e|| | 1 |
| Offside Front Axle swivel joint insecure in a stub axle |2.5.A.3b| | 1 |
| Rear Seat belt attachment fitting badly deteriorated |5.1.B.4| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt outer |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under sill x2 areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing panel x3 areas |2.4.A.3| | 1 |
| Offside Rear Leaf spring eye defective |anchor| spring eye fractured |2.4.B.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded through |6.1.B.2| | 1 |
| Fuel cap/sealing device missing not checked no key |7.2.4a| | 1 |
| Offside Inner Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under step |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded CHASSIS |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by o/s/r spring hanger |6.1.B.2| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is inadequately repaired Sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is inadequately repaired Sill |2.4.A.3| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion Sill |6.1.C.1| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Wing / floor pan |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Wing / floor pan |2.4.A.3| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer and inner sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner chassis rail |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired lower inner sill and door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired lower inner sill and door step |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30 cm of engine mounting cradle |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step x2 |6.1.B.2| | 1 |
| Nearside Rear Lower Leaf spring has excessive side play at eye |anchor| |2.4.B.4| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step under vehicle |6.1.B.2| | 1 |
| Power steering component|s| leaking pipe |2.3.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded xmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger,inner and outer sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings radiator mount |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor next to drivers seat |5.2.6| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bumper |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL CORNER |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER STEP AREA |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CENTRE INNER SILL |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CENTRE INNER SILL |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL & STEP AREA |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CENTRE OUTER SILL |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door shut step sill area |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner & outer sills |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre inner/outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner/outer sill x2 |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and step area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill step area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back corner box structure |6.1.B.2| | 1 |
| Offside Front Lower Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Central Prop shaft bearing housing likely to fail RUBBER MOUNTING |6.1.7 |f| |ii|| | 1 |
| Nearside Front Inner Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Inner Suspension arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/under sill |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing|strut top mount| |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded by sub frame to floor area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded by spring mounting |2.4.A.3| | 1 |
| Emissions not tested oil level low |7.3.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis holed all corrosion marked |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner & outer chassis leg |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner & outer chassis leg |6.1.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r |front leaf spring mount area | |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r leaf spring mount area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r leaf spring mount area corroded ) x2 patches (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r leaf spring mount area corroded (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r leaf spring ( front mount area corroded ) (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/f leaf spring ( front mount area corroded ) (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r chassis corroded ( shock area ) (6.1.1 (c) (i)) | 1 |
| Track rod end ball joint has excessive play n/s/f (2.1.3 (b) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/f outer sill/step area corroded (7.1.1 (a) (i)) | 1 |
| Suspension arm ball joint dust cover no longer prevents the ingress of dirt n/s/f bottom ball joint cover split (5.3.4 (b) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r |rear| leaf spring mount area |2 pieces| around previous repairs |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r |rear leaf spring mount area| around previous repairs | |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r | front leaf spring mount area | around previous repairs |5.3.6 |a| |i|| | 1 |
| Suspension arm ball joint dust cover no longer prevents the ingress of dirt o/s/f bottom ball joint cover split |5.3.4 |b| |ii|| | 1 |
| Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rear panle |6.6.6| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner eage |6.1.B.2| | 1 |
| Centre Rear Vehicle structure excessively corroded within 30cm of towbar mounting over spare wheel |6.6.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor next to shocker (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced back of shocker (6.1.1 (c) (i)) | 1 |
| Nearside Track rod end ball joint has excessive play inner |2.2.B.1f| | 1 |
| Offside Inner Rear Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Rear Passenger`s seat insecure washers loose , seat fixings [washers to small] |6.2.A.1| | 1 |
| Offside Rear Shock absorber insecure chassis corroded |2.7.2b| | 1 |
| Towbar component insecure ball hitch |6.6.1| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill marked yellow |2.4.A.3| | 1 |
| Offside Lower Obligatory mirror missing |8.1.1| | 1 |
| Exhaust emissions exceed manufacturers specified limit limit 0.68 (8.2.2.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to inner wheel arch |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired both sides rear inner wheel arches to floor repaired with mastic |5.3.6 |a| |i|| | 1 |
| Nearside Rear Electrical wiring deteriorated, likely to cause a short all n/s rear lights bad earth or short and not working properly |1.9.2b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced no pattern |1.7.5a| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear silencer holed and leaking gas |7.1.2| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing and chassis under same wheel arch |2.4.A.3| | 1 |
| Offside Front Lower Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Centre Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal |6.2.2 |d| |i|| | 1 |
| Offside Rear Seat belt retracting mechanism defective back |5.2.5b| | 1 |
| Nearside Rear Seat belt retracting mechanism defective back |5.2.5b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Offside Outer Front Lower Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Inner Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Outer Passenger`s seat insecure |6.2.A.1| | 1 |
| Central Rear Outer Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Passenger`s seat insecure 2nd row |6.2.A.1| | 1 |
| Nearside Passenger`s seat insecure 2nd row |6.2.A.1| | 1 |
| Central Passenger`s seat insecure 3rd row |6.2.A.1| | 1 |
| Brake load sensing valve linkage defective and function impaired Siezed (1.1.17 (a)) | 1 |
| Nearside Rear Leaf spring main leaf fractured Front eye broken (5.3.1 (b) (ii)) | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel 47 (1.2.1 (a) (ii)) | 1 |
| Offside Rear Service brake has no recorded effort at a wheel 102 (1.2.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded middle of vehicle |5.2.6| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded rear spring forward mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut mounting area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member / chassis / outrigger at spring anchorage |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wing / floor at spring swinger mounting |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wing / floor at spring swinger mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing near shock absorber mounting |2.4.A.3| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch x2 |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded spring mount |2.4.A.3| | 1 |
| Centre Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded as chalked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind axle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill infront of axle (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill under step (5.3.6 (a) (i)) | 1 |
| Nearside Front Driver`s view restricted by object |6.9.1a| | 1 |
| Front Upper Front position lamp|s| not working BOTH SIDES |1.1.A.3b| | 1 |
| Central Prop shaft joint excessively worn chalked (6.1.7 (c) (i)) | 1 |
| Steering system lock to lock check stretches a brake pipe |2.2.D.2b| | 1 |
| Offside Body has a sharp edge caused by damage wing mirror damaged |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion both side boards |6.1.C.1| | 1 |
| Offside Rear Leaf spring eye defective |anchor| front bush |2.4.B.1b| | 1 |
| Rear Lower Shock absorber has an excessively worn bush Both |2.7.4| | 1 |
| Rear Leaf spring to axle securing bolt insecure all |2.4.B.7b| | 1 |
| Offside Front Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Steering arm deformed and unserviceable |2.2.C.1d| | 1 |
| Offside Front Road wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Offside Body component corroded and likely to cause injury drop side |6.2.1 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensor. |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger. |2.4.A.3| | 1 |
| Offside Front Body component corroded and likely to cause injury door step |6.2.1 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner quarter |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper and fixings |6.1.1 |c| |i|| | 1 |
| Offside Rear Leaf spring fractured Front sheckel |2.4.B.1a| | 1 |
| Offside Front Body has a sharp edge caused by damage wing above bumper |6.1.C.1| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings to rear of sliding door |6.1.B.2| | 1 |
| Front Lower Engine mounting damaged or deteriorated resulting in excessive movement Cross member (6.1.8 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear of wheel arch/back of step (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer step (5.3.6 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill in several places |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill in several places |5.2.6| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings prop-shaft mounting |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering park brake cable front and rear |6.1.A.1| | 1 |
| Central Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail by engine mounting. (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Body has a sharp edge caused by damage rear load bay |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill
|5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded off side and nearside rear crossmemeber |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (within 30cm of OSR anti roll link) (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (within 30cm of NSR anti roll link) (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired Sill filled with expanding foam. not an acceptable repair method (5.3.6 (a) (i)) | 1 |
| Bonnet primary retaining device ineffective the bonnet will not open (3.1 (c)) | 1 |
| Emissions not tested due to faulty running (8.2.2.2 (e)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footstep (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced footstep (6.1.1 (c) (i)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view wing mirror |8.1.2a| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake drum contaminated oil leaking from half shaft (1.1.14 (b)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired step to inner sill |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired crossmember |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle sliding door does not open |6.2.B.1c| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer door sill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/ inner arch |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front inner sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear inner wheel arches at shockers mounts |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Stop lamp not working when fog light on |1.2.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Seat belt not functioning as intended mounting not in correct position |7.1.2 |c|| | 1 |
| Central Prop shaft flexible coupling so deteriorated it is likely to fail 1 st mounting |6.1.7 |d| |ii|| | 1 |
| Central Prop shaft bearing housing likely to fail 2nd mounting |6.1.7 |f| |ii|| | 1 |
| Rear Service brake excessively fluctuating warped drums |1.2.1 |e|| | 1 |
| Speedometer clearly inoperative needle excessively fluctuating on idle |6.7.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing & floor / chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corrosion (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded at subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount/outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, near front leaf mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible (5.3.1 (a) (ii)) | 1 |
| Offside Rear Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed and corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed and corroded (5.3.6 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting MANY DIFFERENT PLACES (6.2.2 (d) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury WING (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring hanger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill by front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer lower quarter panels by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer lower quarter panels by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and lower part of door pillar by front spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill by front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front to rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear shock and brake limiter mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by rear shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis member. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to lower inner wing |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to lower inner wing. |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort foot |3.7.B.5a| | 1 |
| Stop lamp|s| adversely affected by the operation of another lamp Both |4.3.3 |b|| | 1 |
| Front suspension has excessive play in a lower suspension ball joint o/s/f |2.5.B.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Forward facing spring mount |2.4.A.3| | 1 |
| Offside Front Suspension arm pin or bush excessively worn Rear facing (5.3.4 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount and inner panel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount and inner panel (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s chassie (5.3.6 (a) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn n/s/r o/s/r rubber D bushes (5.3.4 (a) (i)) | 1 |
| Nearside Front Inner Body insecure to the extent that stability is seriously impaired step and rear of step |6.2.2 |a| |ii|| | 1 |
| Offside Front Inner Body insecure to the extent that stability is seriously impaired step and front of step |6.2.2 |a| |ii|| | 1 |
| Offside Rear Body insecure to the extent that stability is seriously impaired corner and side |6.2.2 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring |6.1.1 |c| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing upper holed within 30cm of top mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch corroded within 30cm of suspension mounting |2.4.A.3| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both rear anti-roll bar d rubbers excess moivement |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar locating pin insecure insecurely fitted |2.4.G.3a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded within 30cm of engine mounting and subframe mounting in wheel arch area. |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back to door step |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back near out rigger |6.1.B.2| | 1 |
| Central Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step and chasse near fuel tank |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded opp fuel tank |5.2.6| | 1 |
| Nearside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Integral body structure has excessive corrosion which adversely affects braking or steering UNDERSIDE OF VEHICLE SEVERELY CORRODED AND UNSAFE TO DRIVE (6.1.1 (c) (ii)) | 1 |
| Brake performance not tested REAR SUSPENSION MOUNTINGS HEAVILLY CORRODED AND INSECURE (1.2.1 (g)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected UNABLE TO JACK UP VEHICLE BECAUSE OF UNDERSIDE CORROSION (5.3.6 (a) (ii)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Complete inner and outer sill section |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Complete inner and outer sill section |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis section and inner rear wheel arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis section and inner rear wheel arch area |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch badly in several places (5.3.6 (a) (i)) | 1 |
| Steering retaining device missing |2.2.C.1g| | 1 |
| Exhaust system not adequately supported mid silencer |7.1.1| | 1 |
| Nearside Seat belt anchorage prescribed area is severely distorted door pillar |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mountingcrossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassic and crossmember by anti roll bar drop link |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassic and crossmember by anti roll bar droplink |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear crossmember corroded by handbrake cable mounting point |3.1.9| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassic and crossmember by rear mounting |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded top of wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded top of wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassic by drop link |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassic by rear mounting |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded top of off side front chassis rail under bonnet |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded top of near side front chassis rail under bonnet |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded outside of off side front chassis rail under wheel arch |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded outside of near side front chassis rail under wheel arch |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded extensive corrosion to top of off side front inner wheel arch area above wheel |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded off side rear chassis leg |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded extensive corrosion to off side inner sill / under step area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded extensive corrosion to near side inner sill / under step area |5.2.6| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values emissions plate 1.19 at test 7 plus (8.2.2.2 (f)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside rear cross member within 30cm of leaf spring and towbar (6.2.2 (d) (i)) | 1 |
| Integral body structure is fractured and structural rigidity is significantly reduced Offside rear chassis above rear axle (6.1.1 (a) (i)) | 1 |
| Integral body structure is fractured and structural rigidity is significantly reduced Nearside rear chassis above rear axle (6.1.1 (a) (i)) | 1 |
| Rear Stop lamp(s) all not working both sides (4.3.1 (a) (iii)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill - hole (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill - hole (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis - hole (6.2.2 (d) (ii)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front inner sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r outer sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner chassis next leaf spring |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded valence |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded valence |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Braking system leaking pipe above abs pump |3.6.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Underside of step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Underside of step |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing/suspension turret |2.4.A.3| | 1 |
| Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt also play in ball joint |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underside of step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill near foot step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill near foot step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded behind rear wheel in the corner |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately supported hose |3.6.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis above rear spring |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded load sensing valve mounting area |3.3.A.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step floor |5.2.6| | 1 |
| Body has a sharp edge caused by corrosion both sillz iner |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion both rear archs inerr |6.1.C.1| | 1 |
| Offside Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Offside Direction indicators adversely affected by the operation of another lamp earthing fault |1.4.A.2h| | 1 |
| Nearside Front Ball joint has excessive play inner tie rod |2.2.B.1f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill top/step holed |2.4.A.3| | 1 |
| Nearside Rear Direction indicator incorrect colour light lens damaged |1.4.A.2f| | 1 |
| Offside Front Body insecure and dangerous to other road users bumper insecure |6.1.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under door step |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded n/s under rear wheel arches |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded under rear wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near spring hanger , front eye |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near spring hanger , rear eye |2.4.A.3| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement nearside and offside front lower rear bushes on arms |2.4.G.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring anchor bracket damaged and seriously weakened inadequate repair (5.3.1 (b) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill both sides (6.1.1 (c) (i)) | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills both sides (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR AND MIDDLE OUTRIGGERS AND REAR UNDER SILLS AND OFF/SIDE FRONT CHASSIS MEMBER |5.3.6 |a| |i|| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| fouling other parts of the vehicle Pipe on drive shaft |2.3.2| | 1 |
| Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement BOTH REAR BUSHES |2.4.G.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILLS BOTH |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER DROPSILLS |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR WHEEL ARCHES |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear leaf spring hanger |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill |5.3.6 |a| |ii|| | 1 |
| Hazard warning switch inoperative not operating offside lamps |4.4.2 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded panle |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp with indicator |1.1.A.3f| | 1 |
| Offside Front Brake pipe inadequately supported brake pipe to flexi hose |3.6.B.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg at bumper |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing holed at wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis leg holed |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| incorrect colour lense broken |1.1.A.3e| | 1 |
| Offside Front Electrical wiring insecure abs wire |1.9.2a| | 1 |
| Centre Seat belt stitching not secure |5.2.2b| | 1 |
| Nearside Front Tie bar/rod damaged and seriously weakened |2.4.G.1| | 1 |
| Exhaust has a major leak of exhaust gases mid section |7.1.2| | 1 |
| Direction indicator adversely affected by the operation of another lamp All rear lights affected |1.4.A.2h| | 1 |
| Brake pipe leaking Front to rear |3.6.A.1| | 1 |
| Power steering pipe|s| or hose|s| leaking Possible steering rack |2.3.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill step area corroded within 30cms mounting |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill step area corroded within 30cms mounting |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill /step area (7.1.1 (a) (i)) | 1 |
| Nearside Body component insecure a pillar trim (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength quarter panel (5.3.6 (a) (i)) | 1 |
| Brake performance not tested due to corroded pipes (1.2.1 (g)) | 1 |
| Central Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember near spare wheel (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cab (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by load compensator (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by front leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by front leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer rigger by rear leaf spring mount (6.1.1 (c) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction stickers (3.1 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both chassis legs inner |2.4.A.3| | 1 |
| Nearside Front Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture To flexi (1.1.11 (a)) | 1 |
| Parking brake inoperative on one side Both sides need adjusting (1.4.1 (a)) | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint ball joint |2.5.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear bodymount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring mount x 2 |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch x 2 |2.4.A.3| | 1 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view door mirror broken |8.1.2a| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step to inner sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner and outer sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to door step corroded |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear inner sill corroded |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle outer sill corroded |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside chassis legs to rear cross member corroded |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside inner sills to rear cross member corroded |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch corroded |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor corroded |6.1.B.2| | 1 |
| Offside Rear rear brake recording little or no effort service and park brake |3.7.B.5a| | 1 |
| Position lamp has a product on the lens or light source which significantly reduces light intensity all rear lights affected by the operation of another lamp |4.2.3 |b| |ii|| | 1 |
| Front Upper Position lamp not working marker lights inop |4.2.1 |a|| | 1 |
| Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance both rear lenses broken and bulbs not working |1.1.A.3d| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill / inner rear cross member / spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill / inner cross member / spring hanger |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step to sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Body component likely to become detached tipper body mount rotten (6.2.1 (a) (ii)) | 1 |
| Offside Body component insecure tipper mounting rail rotten (6.2.1 (a) (i)) | 1 |
| Offside Body component corroded and likely to cause injury tipper bed (6.2.1 (a) (i)) | 1 |
| Brake performance not tested due to brake pipe (1.2.1 (g)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis inner bay |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s centre chassis various places |2.4.A.3| | 1 |
| rear brake recording little or no effort foot and handbrakes |3.7.B.5a| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i|| | 1 |
| Central Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in wheel arch (6.2.2 (d) (i)) | 1 |
| Exhaust emissions exceed manufacturer`s specified limit limit 1.19 |8.2.2.2 |a|| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury lower wheel arch large hole due to corrosion and sharp edges |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis rail weak and bulging through corrosion top shock mount area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail weak and bulging through corrosion top shock mount area |2.4.A.3| | 1 |
| Trailer electrical socket (13 pin) not operating the trailer lamps as intended (4.10 (c) (i)) | 1 |
| Power steering ram|s| leaking from a failed component rack |2.3.3b| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush drop link, insecure |2.4.G.2| | 1 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt cover split, advise slight play |2.4.G.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded rear cab |5.2.6| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch
X2 (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired Worn out (1.1.17 (a)) | 1 |
| Outline marker lamp lens seriously defective To bright wrong bulb (4.2.1 (b)) | 1 |
| Prop shaft bearing excessively worn 2nd from front (6.1.7 (b) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn Bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2x rust holes within 30cm of spring (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt webbing significantly weakened Holes (7.1.2 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet and inner wings |6.1.1 |c| |i|| | 1 |
| Rear Brake pipe connection leaking on a hydraulic braking system load valve (1.1.11 (b) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and step |6.1.1 |c| |i|| | 1 |
| Front Anti-roll bar pin or bush excessively worn both front `D` bushes |5.3.4 |a| |i|| | 1 |
| Fuel tank insecure strap corroded/broken (6.1.3 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded lower sill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch as marked (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt retracting mechanism defective not retracting fully |5.2.5b| | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis at side of tank (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rigger next to spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step inner (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at the rear (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear wheel arch to floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to floor (5.3.6 (a) (i)) | 1 |
| Nearside Cab steps in such a condition that it is likely to cause injury inner door step |6.2.8 |b|| | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury outer sill to door step |6.2.8 |b|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassie leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg outriger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer carbin |6.1.B.2| | 1 |
| Body component insecure radiator (6.2.1 (a) (i)) | 1 |
| Direction indicator incorrect colour o/s/r outter indicator showing white light |1.4.A.2f| | 1 |
| Front position lamp|s| not working o/s/f upper |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r under doorstep mounting area holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f under doorstep mounting area holed and inadequately repaired |2.4.A.3| | 1 |
| Anti-roll bar has excessive play in a pin/bush o/s/r d bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s behind seatbelt mounting area holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s behind seatbelt mounting area holed |2.4.A.3| | 1 |
| Front position lamp|s| not working o/s/f/ top |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f/ inner arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f/ under door step mounting area holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f/ inner sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded power steering pipes corroded- |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/f/ under door step mounting area holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r/ behind seat belt mounting area |2.4.A.3| | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected lens broken |4.4.1 |b| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most cross member |5.3.6 |a| |i|| | 1 |
| Rear Brake prescribed area is excessively corroded flexi insecure (1.1.21 (e) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor holed |5.2.6| | 1 |
| Nearside Front Statutory seat belt missing belt stalk not attached to a tested mounting |5.1.1| | 1 |
| Windscreen has a combination of minor damage areas which restrict the drivers view damage to r/h top corner of screen |8.3.1c| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced rear of cab (6.1.1 (a) (i)) | 1 |
| Rear Body has a sharp edge caused by damage both metal light guards |6.1.C.1| | 1 |
| Brake pipe inadequately supported Both front to rear pipes |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember x 2 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi/inner arch |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced fracture (7.1.1 (a) (i)) | 1 |
| Offside Front Battery insecure and likely to cause a short circuit Positive terminal close to metal servo!!. Battery not fastened down. (4.13 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp not working Fog lamp not working on the o/s/r. (4.5.1 (a) (ii)) | 1 |
| Rear Body has a sharp edge caused by corrosion body as marked |6.1.C.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Marked with chalk |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outer |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front and rear inner sill |2.4.A.3| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear wish bush |2.5.A.1c| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush rear wish bush |2.5.A.1c| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill at door step at side door inner |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WING AT ROADWHEEL (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER STEP (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X MEMBER AT SPRING HANGER (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases middle silencer box (6.1.2 (a)) | 1 |
| Fuel tank insecure front fuse tank strap broken (6.1.3 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front cross member for engine mount hold (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle inner step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting engine support mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top mount area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure is fractured and structural rigidity is significantly reduced drivers door step (6.1.1 (a) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both n/s and o/s floor / inner wheel arch / rear shock absorber mount area |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount / inner wheel arch area |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by damage Mirror |6.1.C.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near Step |6.1.B.2| | 1 |
| Centre Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings foot step |6.1.B.2| | 1 |
| Front Body has a sharp edge caused by corrosion wings & wheel arches |6.1.C.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner wheel arches to floor |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded inner wheel arches |2.4.A.3| | 1 |
| Rear Suspension system inoperative (5.3.5 (a)) | 1 |
| Offside Rear Leaf spring anchor bracket loose u bolts |2.4.B.6a| | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Corroded (6.1.1 (c) (i)) | 1 |
| Nearside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sills corroded (6.1.1 (c) (i)) | 1 |
| Offside Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and Outer Sills corroded (6.1.1 (c) (i)) | 1 |
| Towbar locking device missing R clip missing tow pin |6.6.3b| | 1 |
| Nearside Inner Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Inner Exhaust system not adequately supported |7.1.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded various areas |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Leaf spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side before wheel arch |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor / inner sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded upper inner wheel-arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis /floor/cross-members |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis cross-members |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion arch panel |6.1.C.1| | 1 |
| Offside Front suspension has excessive movement at a tie bar joint |2.5.A.1c| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded middle sill |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded middle sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills and door step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger at front spring eye |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel at rear spring eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel at rear spring eye |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at front spring eye |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at front spring eye |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded compensator valve (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis members |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis member |2.4.A.3| | 1 |
| engine mounting deteriorated resulting in excessive movement bush at gearbox |6.1.D.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis, wheel arch, outer sill and rear floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded most rear inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger |marked| under wheel arch too |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |marked| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |marked| |2.4.A.3| | 1 |
| Inner Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch x2 holes |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outercill |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by seatbelt mounting (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch by engine craddle mounting (6.1.1 (c) (i)) | 1 |
| Fuel cap/sealing device ineffective cannot undo fuel cap |6.1.3 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger within rear spring hanger area (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring eye defective |anchor| front eye incomplete |2.4.B.1b| | 1 |
| Nearside Front Suspension arm damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Power steering pipe/hose excessively corroded rack feed pipe |2.1.5 |g| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete in and outer sills |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete inner and outer sills |6.1.B.2| | 1 |
| Offside Front position lamp|s| not working center side |1.1.A.3b| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember as marked |6.6.6| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounnting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mounting. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded side pannel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded side pannel |2.4.A.3| | 1 |
| Stop lamp not working all rear |1.2.1b| | 1 |
| Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases centre boxes |7.1.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch seam to floor |6.1.B.2| | 1 |
| Nearside Front Front wheel bearing rough when rotated also has play |2.5.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower brake caliper locking device missing |3.5.1l| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill excess corrosion |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill excess corrosion |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing excess corrosion |6.1.B.2| | 1 |
| Offside Rear Glazing/screen/partition not made of safety glass or safety glazing |6.9.8| | 1 |
| Braking system leaking front to rear brake pipe |3.6.A.1| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded near tank |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour lens broken showing white light |1.1.A.3e| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step and sill |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and rear sill |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear |2.4.A.3| | 1 |
| Rear Suspension has inadequate clearance with the bump stop both |2.4.A.1a| | 1 |
| Nearside Front Leaf spring shackle bracket corroded and seriously weakened mounting that leaf spring bracket sit on is corrode and weaken |2.4.B.6d| | 1 |
| Offside Rear Leaf spring shackle bracket corroded and seriously weakened mounting that leaf spring bracket sit on is corrode and weaken |2.4.B.6d| | 1 |
| Offside Body has a sharp edge caused by corrosion inner seal |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion outer seal corroded |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion inner seal corroded |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion outer seal corroded |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion inner seal corroded |6.1.C.1| | 1 |
| Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both d bushes |2.4.G.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/step |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by steering rack |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hangers |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hangers |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch/floor, marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor, marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill
|2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area, 2 small holes in chassis, marked yellow |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corrosion hole close to rear suspension rear mount, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
| Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Centre Front Sub-frame attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Nearside Rear Upper Loading door cannot be secured in the closed position securing latch missing. |6.4.1| | 1 |
| Rear Electrical wiring deteriorated and bare wires exposed 7 pin trailer socket. |1.9.2c| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis by load valve. |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger in front & rear of spring front mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger spring shackle end. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer door sill. |2.4.A.3| | 1 |
| Hazard warning lamps inoperative do not flash. |1.4.B.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch at base of suspension turret. |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis by sub frame & further forward. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis over rear axle. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis next to gearbox mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis in next to out rigger in front of rear axle. |2.4.A.3| | 1 |
| Central Rear Electrical wiring damaged, likely to cause a short 7 pin socket wiring. |1.9.2b| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded load valve |1.1.21 |e| |i|| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings back of wheel |6.1.B.2| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside and nearside sills |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside sill and inner sill |5.2.6| | 1 |
| Nearside Headlamp does not operate immediately when selected on main beam bad earth |1.7.4a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill inadequate repair |2.4.A.3| | 1 |
| Nearside Front Windscreen wiper not operating over a large enough area to give an adequate view |6.1.1c| | 1 |
| Centre Front Obligatory mirror missing |6.6.1a| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sill |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near fuel tank bracket |5.3.6 |a| |i|| | 1 |
| Windscreen damaged and affecting the driver`s view of the road Damage exceeding 40mm in zone a &b |3.2 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill and outrigger |5.2.6| | 1 |
| Offside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Corroded. (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner Sill corroded. (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill. front to back (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis frame (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis frame (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail/ box section marked |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area marked inner and outer |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting area section |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail/ box section area |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting all areas marked |6.2.2 |d| |i|| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings xmber |6.1.B.2| | 1 |
| Offside Rear Rear reflector reflecting white to the rear |4.8.2 |a| |ii|| | 1 |
| Offside Front Body component damaged and likely to cause injury Light unit |6.2.1 |a| |i|| | 1 |
| Nearside Front Road wheel fixing missing Stud snapped |5.2.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger + sides |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger+sides |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chissis |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock (5.3.6 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both sides inner+ outer sills |6.1.1 |a| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to shock |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to shock |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan next to shock |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan next to shock |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rotten next to leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rotten next to leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing,under wheel arch |2.4.A.3| | 1 |
| Power steering component leaking around steering rack (2.1.5 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and step badly corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step badly corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch near spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill complete sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rust to ns sill near spring mount |2.4.A.3| | 1 |
| Offside Front Brake hose stretched |found during steering lock to lock check| hoses insecure |2.2.D.2b| | 1 |
| Nearside Body has a sharp edge caused by corrosion side by the drop side mountings |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step x2 |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheelarch |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of outrigger (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure front support corroded and not secure (6.1.3 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor area and sidesill (7.1.1 (a) (i)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near the fuel filler neck |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under in the wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced transfer of current |4.2.3 |a| |ii|| | 1 |
| Offside Rear Direction indicator light intensity significantly reduced transfer of current |4.4.3 |a|| | 1 |
| Offside Rear Stop lamp|s| light intensity significantly reduced transfer of current |4.3.3 |a| |ii|| | 1 |
| Offside Rear Rear fog lamp light intensity significantly reduced transfer of current |4.5.4 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg within 30cm of the shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg within 30cm of the shocker mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear valance within the leaf spring mounting |2.4.A.3| | 1 |
| Nearside Inner Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Front Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner and outer sills inc rear archer on outer (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded side step, under vehicle |5.2.6| | 1 |
| Fuel system component leaking No2 injector |7.2.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Around shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Around shock |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Around spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Around spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front of spring leaf spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floorpan |2.4.A.3| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded floorpan |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded chassis at compensator mount |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front under body |2.4.A.3| | 1 |
| Nearside Seat belt stitching not secure |5.2.2b| | 1 |
| Offside Rear Rear wheel steering connection has excessive play |2.2.B.1i| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of leaf spring |5.3.6 |a| |i|| | 1 |
| Direction indicators flashing more than 120 times a minute both |1.4.A.2g| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring hanger mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear spring hanger mounts |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp effecting side light |1.4.A.2h| | 1 |
| Offside Front Leaf spring deteriorated and seriously weakened |2.4.B.1a| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer & inner sills (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel behind drivers seat (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front out rigger for leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front out rigger for leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch chassis leg (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake compensator |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Centre outer sill |5.2.6| | 1 |
| Nearside Inner Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Inner Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under step/inner wing |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step/outer sill top |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at front and rear leaf mount |2.4.A.3| | 1 |
| Offside Front Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Centre Front Upper Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Exhaust system not adequately supported rear box mounting broken |7.1.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear chassis legs (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner wings visible above exhaust (5.3.6 (a) (i)) | 1 |
| Emissions not tested low oil level (8.2.2.2 (e)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wing |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired under wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired under wing |2.4.A.3| | 1 |
| Headlamp not working on dipped beam both sides |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded in number of places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in number of places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded seat area |2.4.A.3| | 1 |
| Vehicle Identification Number has more than one different number displayed (0.2 (c)) | 1 |
| Oil leaking excessively from engine filter housing cap. |8.4.1 |a| |i|| | 1 |
| Rear Anti-roll bar insecure mounting hole for offside drop link excessively worn |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill front spring area |2.4.A.3| | 1 |
| Nearside Outer Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg top |6.1.B.2| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced Interacting with indicator |4.2.3 |a| |ii|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced Interacting with indicator |4.2.3 |a| |ii|| | 1 |
| Front Fuel system component leaking diesel pump |7.2.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sills |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sills |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded body adjacent to rear suspension mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded body adjacent to rear suspension mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner wheelarch area |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch area |5.2.6| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in several places (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sills from front to rear (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches & flooring (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arches (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis around strut (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x member (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step holed |5.2.6| | 1 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Seat belt buckle missing row 5 (7.1.2 (d)) | 1 |
| Offside Rear Emergency exit door cannot be opened from inside the vehicle (9.1.2 (a)) | 1 |
| Offside Rear Emergency exit door cannot be opened from outside the vehicle (9.1.2 (a)) | 1 |
| Offside Rear Outer Emergency exit sign missing (9.1.2 (b) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step underside/sill |5.3.6 |a| |i|| | 1 |
| Central Rear Prop shaft bearing housing fractured |6.1.7 |f| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out-rigger |6.1.B.2| | 1 |
| Inner Front Lower Power steering ram|s| leaking from a failed joint |2.3.3b| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill mid & rear (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cassis leg (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crash bar (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering at outrigger at front spring eye (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill at outrigger at rear spring eye (6.1.1 (c) (ii)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush
|2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting areas (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie coroed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie corroed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to step corroed |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch corroed |6.1.B.2| | 1 |
| Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step inner and outer rotted and holed |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side inner wings and wheel arches rotted |6.1.B.2| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect Headlight deteriorated |1.8.A.1b| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp all lights |1.1.A.3f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by rear spring eye |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded by front spring eye |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by rear spring eye |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by front spring eye |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by upper shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by upper shock |2.4.A.3| | 1 |
| Front Sub-frame corroded and seriously weakened and rear (5.3.3 (b) (i)) | 1 |
| Offside Front Hydraulic brake calliper excessively weakened by corrosion (1.1.16 (d) (i)) | 1 |
| Centre Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Anti-roll bar locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Power steering component|s| leaking Suspect rack |2.3.3b| | 1 |
| Central Rear Prop shaft joint so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Offside Power steering pipe/hose leaking |2.1.5 |a|| | 1 |
| Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings n/s/r inner sill support |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s outer sill |6.1.B.2| | 1 |
| Offside Rear Lower Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front position lamp|s| not working SIDE LIGHT |1.1.A.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded OUTTER SILL |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTTER SILL |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTTER SILL |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded FRONT OUTTER RIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTTER RIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS X3 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS X3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill has large Hole (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill has large hole (6.1.1 (c) (i)) | 1 |
| Offside Front Ball joint cracked and unserviceable |2.2.C.1d| | 1 |
| Central Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Rear Body insecure and dangerous to other road users doors |6.1.B.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis 2 places on inside (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing within 30 cm of mounting point (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill within 30 cm of spring anchorage (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill x2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill end |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill end |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor x2 |6.1.B.2| | 1 |
| Nearside Front Macpherson strut mounting corroded and seriously weakened Inner wing and chassis |5.3.3 |b| |i|| | 1 |
| Offside Front Macpherson strut mounting corroded and seriously weakened Inner wing |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis by front mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength By rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near upper shock Absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near upper shock Absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded MARKED BOTH UNDER VAN |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded UNDER VAN MARKED |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded 2 PLACES MARKED |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab wall (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cab wall (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring shackle bracket fractured Front shackle |5.3.1 |b| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill and chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis box next to r leaf spring anchorage |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box next to r leaf spring anchorage |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front leaf spring anchorage |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear horizontal box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear horizontal box section |2.4.A.3| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing and chassis rail |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre and rear sill |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| not working side amber marker light not working |1.1.A.3b| | 1 |
| Nearside Rear Body insecure and dangerous to other road users bumper end cap not secure |6.1.B.1b| | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted bumper end cap missing projection of sharp edges. (6.1.4 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced inner body sills holed and corroded (6.1.1 (a) (i)) | 1 |
| Offside Rear Upper Vehicle structure is fractured and structural rigidity is significantly reduced rear wheel arch area to loading floor area holed, corroded at various points (6.1.1 (a) (i)) | 1 |
| Nearside Front Body component insecure bumper corner section |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at rear by chassis member |6.1.1 |c| |i|| | 1 |
| Power steering pipe/hose damaged such that the steering is adversely affected (2.1.5 (g) (ii)) | 1 |
| Nearside Brake pipe likely to become detached or damaged middle (1.1.11 (d) (ii)) | 1 |
| Offside Front Engine mounting bracket fractured (6.1.8 (a) (ii)) | 1 |
| Nearside Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Rear Outline marker lamp lens seriously defective (4.2.1 (b)) | 1 |
| Prop shaft bearing excessively worn center X 2 (6.1.7 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x 2 (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under floor (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached drop link (5.3.3 (a) (i)) | 1 |
| Offside Rear Lower Tie bar/rod attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Lower Tie bar/rod synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step corroded |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/ floor pan |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor pan |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring eye defective |anchor| Front eyelet snapped |2.4.B.1b| | 1 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Bottom ball joint |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe rear mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe front mounting |5.3.6 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` wipers don`t park correctly |8.3.1e| | 1 |
| Prop shaft bearing housing insecure centre mount |6.1.7 |f| |i|| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure bolt missing |2.4.G.1| | 1 |
| Nearside Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Centre Front drive shaft coupling is insecure |2.5.C.1c| | 1 |
| Central Brake pipe inadequately supported down chassis rail |front to rear| |3.6.B.1| | 1 |
| Rear Body has a sharp edge caused by corrosion bumper is holed |6.1.C.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is fractured cab out rigger |5.2.6| | 1 |
| Rear Position lamp light intensity significantly reduced both |4.2.3 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rigger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii)) | 1 |
| Nearside Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings by diesel tank |6.1.B.2| | 1 |
| Offside Rear Braking system leaking on rear axle |3.6.A.1| | 1 |
| Centre Exhaust system not adequately supported middle box rear tail pipe not secure |7.1.1| | 1 |
| Front Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Offside Front Body component corroded and likely to cause injury side step (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn Front (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x2 inner sill and towbar |2.4.A.3| | 1 |
| Nearside Front Fuel system component leaking excessively or a risk of fire injector pump |6.1.3 |b| |ii|| | 1 |
| Central Electrical wiring insecure and connectors likely to become disconnected marker light (4.11 (a) (ii)) | 1 |
| Rear Prop shaft bearing housing insecure bearing rubber broken away |6.1.7 |f| |i|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn bolt loose |5.3.4 |a| |i|| | 1 |
| Nearside Upper Outline marker lamp not working roof (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working x3 (4.2.1 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis inside wheel arch (6.2.2 (d) (i)) | 1 |
| Bonnet primary retaining device insecure Bonnet does not open (3.1 (c)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole within 30cm of subframe fixing (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch has corrosion hole within 30cm of subframe fixing (6.1.1 (c) (i)) | 1 |
| Central Rear Brake pipe excessively damaged Rear brake pipe has rubbed through on handbrake cable (1.1.11 (c)) | 1 |
| Central Front Power steering component leaking Power steering leaking from under bonnet but full investigation cannot be carried out due to bonnet not opening (2.1.5 (a)) | 1 |
| Nearside Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg has corrosion hole within 30cm of subframe fixing (Not previously found due to bonnet not opening during initial test) (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING & CHASSIS TOP |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL SPRING MOUNT |5.3.6 |a| |i|| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting CHASSIS RAIL |6.1.6 |i| |i|| | 1 |
| Emissions not tested ENGINE NOISEY |8.2.2.2 |e|| | 1 |
| Brake performance not tested BRAKE PIPE LEAKING |1.2.1 |g|| | 1 |
| Central Brake pipe excessively damaged both |1.1.11 |c|| | 1 |
| Nearside Rear position lamp|s| not working wrong bulb |1.1.A.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded nner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill not welded |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger by spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger by spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount (5.3.6 (a) (i)) | 1 |
| Rear Rear position lamp|s| incorrect colour damged showing white light |1.1.A.3e| | 1 |
| Rear Front drive shaft coupling flexible rubber or fabric coupling unit severely cracked |2.5.C.1d| | 1 |
| Headlamp aim not tested x2 (4.1.2 (b)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch area within shocker mounting area (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within the lower front subframe mounting area (6.2.2 (d) (i)) | 1 |
| Brake performance not tested n/s/f seized caliper |3.7.A.1| | 1 |
| Nearside Inner Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind wheel arch |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind wheel arch |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mount. |2.4.A.3| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine ON TICK OVER (8.2.2.2 (b)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside cab rear of seat (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury rear light beam (6.2.1 (a) (i)) | 1 |
| Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Rear Braking system leaking load sensing valve leaking |3.6.A.1| | 1 |
| Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired O/S & N/S Sills Heavily Corroded. (6.2.2 (d) (ii)) | 1 |
| Centre Brake pivot excessively worn and seriously weakened |3.5.1e| | 1 |
| Suspension component mounting prescribed area is excessively corroded both o/s and n/s rears |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both side front sill to step (5.3.6 (a) (i)) | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to step |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to outrigger |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to wheel arch |rear| |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Cross member within 30 cm of spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Cross member within 30 cm of rear spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to wheel arch | rear| |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to wheel arch |front| |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to step |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill to wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis to floor |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch |front| |6.1.1 |c| |i|| | 1 |
| Nearside Front engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Offside Front engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Towbar component insecure electrical socket
|6.6.1| | 1 |
| Fuel system component leaking Leaking Directly Onto Exhaust Manifold |7.2.3| | 1 |
| Nearside Outer Suspension spring mounting prescribed area is excessively corroded Sill In 2 Places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner Arch Above Chassis |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Rail weakened By Corrosion |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Rail weakened By Corrosion |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis To inner Wing |6.1.1 |c| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring hanger (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear of sills o/s and n/s (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing housing likely to fail Propshaft rearmost centre bearing rubber collapsed (6.1.7 (f) (ii)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsf inner wing |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osf inner wing |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osr sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns inner sill at rear |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr outrigger at spring |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr chassis at spring |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr inner corner at outrigger |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osr inner arch |6.1.B.2| | 1 |
| Anti-roll bar rubber mounting deteriorated resulting in excessive movement both front d bushes |2.4.G.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill to Step |5.2.6| | 1 |
| Offside Body panel damaged and likely to cause injury Mirror casing (6.2.1 (a) (i)) | 1 |
| Brake performance not tested Brake pipe leaking at nearside rear (1.2.1 (g)) | 1 |
| Rear Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & outer side panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis , under floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step holed (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step holed (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step holed (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Offside Rear Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired quater sill holed behind bumper (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired crossmember holed (6.2.2 (d) (ii)) | 1 |
| Fuel pipe leaking injector pipe |7.2.3| | 1 |
| Fuel tank insecure front strap corroded |6.1.3 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded seat monting |2.4.A.3| | 1 |
| Inner Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded inner sill and step |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch to floor |2.4.A.3| | 1 |
| Offside Outer Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Offside Front Inner Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings CHASSIS LEG HOLED AND CORRODED |6.1.B.2| | 1 |
| Offside Inner Suspension spring mounting prescribed area is excessively corroded SILL CORRODED |2.4.A.3| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded SILL HOLED CORRODED |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS LEG HOLED AND CORRODED |6.1.B.2| | 1 |
| Offside Front Anti-roll bar fractured anti roll bar broken in too at the anti roll bar link |5.3.3 |b| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill-multiple holes (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill-multiple holes (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill-multiple holes (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg visible from wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting top mounting area (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch corroded in various places (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch corroded in various places (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s/r inner wheel arch corroded in various places (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch corroded in various places (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger corroded in various places (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger corroded in various places (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step corroded underneath (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to chassis rail corroded underneath above fuel lines (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail corroded near to engine mount cross member (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger corroded (6.2.2 (d) (i)) | 1 |
| Offside Track rod end ball joint has excessive play DANGEROUS (2.1.3 (b) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel at both spring hangers |6.1.B.2| | 1 |
| Fuel tank insecure both tank straps are corroded |7.2.1| | 1 |
| Nearside Rear Inner brake drum contaminated by oil |3.5.1h| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top of chassis ( rear spring front mount ) (5.3.6 (a) (i)) | 1 |
| Nearside Front Tie bar/rod which is adjustable, loose in adjustment threads |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring area |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt damaged Drivers |7.1.2 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension top |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill/step |6.1.B.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor/step, marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn bottom arm rear bush |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn Bottom arm rear bush |5.3.4 |a| |i|| | 1 |
| Rear Exhaust system insecure tail pipe support bracket corroded and broken (6.1.2 (a)) | 1 |
| Central Lower Fuel tank insecure water tank (6.1.3 (a) (i)) | 1 |
| Nearside Outer Front Lower Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Windscreen damaged and affecting the driver`s view of the road ZONE A |3.2 |a| |ii|| | 1 |
| Nearside Front Body component damaged and likely to cause injury DOOR MIRROR CASING BROKEN |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WING |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced CRACKED |6.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Cill CTE |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength Cill CTE |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Outrigger & Inner Cill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Outrigger & Cill |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel Arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel Arch |2.4.A.3| | 1 |
| Offside Rear Braking system leaking FROM BACKPLATE |3.6.A.1| | 1 |
| Offside Rear Leaf spring cracked FRONT LOOP |2.4.B.1a| | 1 |
| Nearside Front Windscreen is of a temporary type |8.3.1f| | 1 |
| Offside Front Windscreen is of a temporary type |8.3.1f| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp earthing fault |1.4.A.2h| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings over parts of underbody marked with yellow chalk |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at spring mount |6.1.B.2| | 1 |
| Steering lock stop insecurely locked |2.2.D.2c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch also near side under step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch also offside under step |2.4.A.3| | 1 |
| Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch and chassis |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced pillar, visible when looking towards the rear of the side load door when open (6.1.1 (c) (i)) | 1 |
| Front Fuel tank insecure tank strap heavily corroded and fractured (6.1.3 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outrigger area, visible in inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded quarter panel |behind bumper| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner lower wheel arch going to rearmost inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan/ inner lower wheel arch area above leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is inadequately repaired inner quarter panel |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion inner step |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion rear floar holed corroded |6.1.C.1| | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced door hinge/ pillar (6.1.1 (d) (i)) | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner sill (6.1.1 (d) (i)) | 1 |
| Offside Front Drivers door pillar insecure (6.2.3 (c) (ii)) | 1 |
| Offside Power steering pipe|s| or hose|s| leaking pipe to rack |2.3.3b| | 1 |
| Offside Front brake disc insecure disc`s broken |3.5.1i| | 1 |
| Offside Front Body component corroded and likely to cause injury wing sharp edge / due to corrosion (6.2.1 (a) (i)) | 1 |
| Braking system leaking Rear load valve (1.1.3 (d)) | 1 |
| Nearside Body has a sharp edge caused by corrosion lower sill front to rear |6.1.C.1| | 1 |
| Rear Upper Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side seal |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side seal |6.1.B.2| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced condensation |1.7.5a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine mount. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected Load sensing valve mounting (Chassis) (1.1.21 (e) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sills. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf Spring mount (rear) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount (front) Inner and outer sill. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner upper wheel arch area / behind top of wheel |2.4.A.3| | 1 |
| Central Statutory seat belt missing Stalk |5.1.1| | 1 |
| Electrical wiring damaged, likely to cause a short Offside under bonnet red wire. Also insecure |1.9.2b| | 1 |
| Stop lamp has a product on the lens so it is not visible from a reasonable distance Both when rear lights on |1.2.1d| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded In sill |2.4.A.3| | 1 |
| brake disc locking device insecure Wheel not clamping disc |3.5.1l| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement and offside front |2.4.G.2| | 1 |
| Offside Inner Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Outer Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Prop shaft joint excessively worn Rear Universal Joint bearing (6.1.7 (c) (i)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light white (4.5.4 (a)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp interacting with tail lamp |4.4.3 |b|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed in 2 places |6.2.2 |d| |i|| | 1 |
| Power steering component|s| leaking top of steering rack |2.3.3b| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush on arm |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush on arm |2.4.G.2| | 1 |
| Rear Body has a sharp edge caused by damage tail gate |6.1.C.1| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp all lamps in this location are affected |1.1.A.3f| | 1 |
| Offside Front Position lamp not working wing lamp (4.2.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Cab floor and step |5.2.6| | 1 |
| Nearside Rear Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Rear Front drive shaft coupling is insecure |2.5.C.1c| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area, marked with chalk |6.1.1 |c| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` writing on screen |8.3.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer door step |6.1.B.2| | 1 |
| Rear Loading door cannot be secured in the closed position doors not shutting securely |6.4.1| | 1 |
| Rear Body insecure and dangerous to other road users step/bumper |6.1.B.1b| | 1 |
| Centre Exhaust system not adequately supported box mounting broken off |7.1.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch/floor |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch/floor |6.1.B.2| | 1 |
| Nearside Front Sub-frame attachment attachment bracket inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Sub-frame attachment attachment bracket inappropriately repaired |2.4.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis near rear spring rear mounting |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle side of chassis |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering above axle side of chassis |6.1.A.1| | 1 |
| Rear Service brake lagging in operation not locking and efficiency low (1.2.1 (d)) | 1 |
| Nearside Front Seat belt damaged section of seat belt cut away (7.1.2 (b) (i)) | 1 |
| Offside Front Seat belt damaged section of seat belt frayed and cut halfway through, (7.1.2 (b) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (chalked) (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear most (5.3.4 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sills |5.2.6| | 1 |
| Body has a sharp edge caused by corrosion nearside rear metal mud flap |6.1.C.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced STEP (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting rear panel |6.6.6| | 1 |
| Nearside Front Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Rear outline marker lamp|s| not working side step light
|1.1.B.1c| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outter seal (7.1.1 (a) (i)) | 1 |
| Nearside Rear Drag link end loose |2.2.B.1d| | 1 |
| Rear Direction indicator incorrect colour both sides |1.4.A.2f| | 1 |
| Nearside Front brake caliper securing device missing bolt missing |3.5.1j| | 1 |
| Headlamp not working on dipped beam x2 |4.1.1 |a| |ii|| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn x2 |5.3.4 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step underside marked yellow |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor/arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired front outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering arch |6.1.1 |c| |ii|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| All position lamps not working all o/s side markers
n/s middle and rear markers |1.1.A.3b| | 1 |
| Body has a sharp edge caused by corrosion front o/side wing |6.1.C.1| | 1 |
| Brake load sensing valve defective and function impaired valve siezed |3.6.E.3| | 1 |
| Nearside Rear Rear position lamp|s| not working also rear n/side marker lamp innop |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wings |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wings |2.4.A.3| | 1 |
| Offside Rear Lower Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded X-member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded @ shackle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded @ top s.mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded @top s.mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired X-member |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded x-member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded x-member |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired arch |2.4.A.3| | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded turret |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and door step |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and door step |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Front position lamp|s| adversely affected by the operation of another lamp working brake lught |1.1.A.3f| | 1 |
| Offside Front Inner Front position lamp|s| adversely affected by the operation of another lamp working brake light |1.1.A.3f| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front rearspring |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of rear spring |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings strut |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail near spring shackle |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Rear cross member area in two places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail area around shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Brake insecure brake load valve |1.1.21 |c|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill and around spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member near spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring mount |5.3.6 |a| |i|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near fuel tank chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel chassis |5.3.6 |a| |i|| | 1 |
| Centre Front Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded suspension mount by rear shock |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear most suspension mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear most outrigger |2.4.A.3| | 1 |
| Braking system leaking lav valve |3.6.A.1| | 1 |
| Brake valve leaking LAV valve |3.6.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel hole in chassis |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine too high |7.4.B.3b| | 1 |
| Offside Brake cable locking device missing |3.5.1l| | 1 |
| Offside Direction indicator not working side |1.4.A.2c| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulk head - marked (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor - marked (7.1.1 (a) (i)) | 1 |
| Offside Front Sub-frame insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Offside Front Lower Steering column attachment defective bolts loose (2.2.2 (d) (i)) | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure and impairing directional stability bolt loose marked (5.3.3 (a) (ii)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure and impairing directional stability bolt loose marked (5.3.3 (a) (ii)) | 1 |
| Offside Rear Sub-frame attachment bracket/mounting insecure and impairing directional stability rear most bolt on front sub-frame loose marked (5.3.3 (a) (ii)) | 1 |
| Lower Steering column retaining device insecure bolts loose |2.1.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor - marked (7.1.1 (a) (i)) | 1 |
| Nearside brake disc excessively worn |3.5.1g| | 1 |
| Offside brake disc excessively worn |3.5.1g| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired rear lower of wheel arch (6.2.2 (d) (ii)) | 1 |
| Nearside Front Suspension component insecurely attached Bolt loose (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded lead spring mount |2.4.A.3| | 1 |
| Fuel system component insecure one tank strap badly corroded the other one is broken |7.2.1| | 1 |
| Nearside Front Steering rack has excessive free play detected at the steering wheel |steering rack fitted| |2.3 |a| |i|| | 1 |
| Offside Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
| Nearside Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached drop link |5.3.3 |a| |ii|| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt arm ball joint |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Central Front Prop shaft likely to become detached slider bolt missing (6.1.7 (a) (ii)) | 1 |
| Fuel tank insecure front fuel tank strap broken (6.1.3 (a) (i)) | 1 |
| Offside Body component damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Inner Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to chassis |inner arch| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to chassis |inner arch| |2.4.A.3| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings doorstep |6.1.B.2| | 1 |
| Nearside Suspension arm synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded arch inner |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member x2 |6.1.B.2| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside & offside |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside & offside |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Body has a sharp edge caused by damage step area |6.1.C.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step area |6.1.B.2| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded chassis top below servo |1.1.21 |e| |i|| | 1 |
| Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded x3 |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill areas |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded sill areas |2.4.A.3| | 1 |
| Main beam `tell-tale` not working very weak |1.7.4c| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and inner sill chalked |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases intermediate silencer |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Seat mount/floor section corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis bump stop near shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis bump stop near shock mount (5.3.6 (a) (i)) | 1 |
| Direction indicator incorrect colour damage to o/s/r lamp unit. |1.4.A.2f| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside inner and outter sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear inner sill/outrigger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear chassis section and inner |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear chassis section and inner |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired outter sill |2.4.A.3| | 1 |
| Nearside Front Headlamp aim not tested bulb insecure, no pattern |1.8.A.1c| | 1 |
| Offside Front Headlamp aim not tested bulb insecure, no pattern |1.8.A.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger 30cm of leafspring mount/shackle |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis added section, beaver tail (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis added section, beaver tail (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember for load area corroded. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main load area chassis corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center cross member near rear spring front hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab floor near seat and seat belt mountings (7.1.1 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis in front of tipper body (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail side |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired n/s + o/s chassis sides as chalked |2.4.A.3| | 1 |
| Nearside Front Outer Passengers seat with a defective structure (6.2.6 (a) (i)) | 1 |
| Nearside Rear Oil leaking excessively from transmission half shaft seal (8.4.1 (a) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step to sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis rail chalked (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail chalked (6.1.1 (c) (i)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced above propshaft (6.1.1 (c) (i)) | 1 |
| Nearside Rear Position lamp light intensity significantly reduced interaction |4.2.3 |a| |ii|| | 1 |
| Central Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced side step / sill / inner sill / inner wheel arch areas |7.1.1 |a| |i|| | 1 |
| Offside Front Body component corroded and likely to cause injury wing area |6.2.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Both boxes |7.1.2| | 1 |
| Passengers airbag missing (7.1.5 (a)) | 1 |
| Power steering component insecure and steering adversely affected reservoir (2.1.5 (d) (ii)) | 1 |
| Offside Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Offside Front Engine mounting damaged or deteriorated resulting in excessive movement corroded at mounting point |6.1.8 |a| |i|| | 1 |
| Offside Brake pedal anti-slip provision loose |3.3.A.1b| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis bar |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg/inner wing |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg/inner wing |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to outriggers |6.1.B.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is fractured wing |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is fractured wing |2.4.A.3| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step to sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor at chassie leg (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to floor (6.2.2 (d) (i)) | 1 |
| Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member at tow bar (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced In suspension prescribed area. (6.1.1 (c) (i)) | 1 |
| Nearside Other passenger door cannot be opened from outside the vehicle side door handle snapped and sharp |6.2.3 |a|| | 1 |
| Driver`s seat moving inadvertently seat back insecure |6.2.5 |b| |ii|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch/doorstep/sill end (6.2.2 (d) (i)) | 1 |
| Entrance/exit door emergency control inoperative UNABLE TO OPEN SIDE DOOR |6.2.C.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S AND O/S INNER SILLS CORRODED AND HOLED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S/R INNER WING CORRODED |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced by front of rear spring (6.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired floor to sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor to sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded most outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front outrigger |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Middle|marked | |6.1.1 |c| |i|| | 1 |
| Nearside Headlamp aim beam image obviously incorrect bulb fitted incorrectly |1.8.A.1b| | 1 |
| Nearside Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Box section holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner sill holed |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near Front seat anchor point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner arch holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering x2 |6.1.A.1| | 1 |
| Nearside Rear Lower Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill / step (6.1.1 (c) (i)) | 1 |
| Inner Statutory seat belt missing |5.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mount area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired as marked |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 7.05 |7.4.B.3b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s step |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis/rear hangers |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear floor/ arches |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/o/s sills |6.1.B.2| | 1 |
| Nearside Rear Oil leaking excessively from transmission Half shaft |8.4.1 |a| |i|| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion side marker bracket |6.1.C.1| | 1 |
| Nearside Rear Body insecure and dangerous to other road users tipper bed |6.1.B.1b| | 1 |
| Offside Rear Body insecure and dangerous to other road users tipper bed |6.1.B.1b| | 1 |
| Nearside Macpherson strut insecure |2.4.G.1| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step n/s |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step inner o/s |6.2.2 |d| |i|| | 1 |
| Front Brake pipe at imminent risk of failure or fracture front round steering pipes |1.1.11 |a|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering Inner sill |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering Inner sill |6.1.A.1| | 1 |
| Brake warning device indicates a leak in the brake system |3.3.E.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch, front and back (6.1.1 (c) (i)) | 1 |
| Offside Rear Trailer electrical socket (13 pin) not operating the trailer lamps as intended indicator (4.10 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal, suspension mount (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal step area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal, and chassy (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner seal (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch / floor pan |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking P.A.S. return pipe from rack insecure/leaking |2.3.3b| | 1 |
| Offside Front Brake hose leaking brake hose union on caliper |3.6.A.1| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a joint pipes into rack |2.3.3b| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded inner arch |3.1.9| | 1 |
| Suspension component mounting prescribed area is excessively corroded inner arch above rear axle |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded under step |5.2.6| | 1 |
| Nearside Rear Body has a projection caused by damage interior lamp |6.1.C.1| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D bushes worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Brake cable damaged fouling on rim |1.1.15 |a|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by engine mount bracket |6.1.B.2| | 1 |
| Offside Rear Direction indicator incorrect colour lenses smashed |1.4.A.2f| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing and chassis |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tail lift mounting near spring mount and tow bar |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tail lift mounting near spring mount and tow bar |6.1.B.2| | 1 |
| Offside Road wheel badly damaged |4.2.A.1a| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced cross member has hole next to tank (6.1.1 (a) (i)) | 1 |
| Rear Drive shaft which forms part of the suspension damaged |2.4.G.4a| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill all |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both front inner sills |2.4.A.3| | 1 |
| Offside Rear Upper passenger door catch insecure |6.2.B.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/step (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer step (7.1.1 (a) (i)) | 1 |
| Fuel tank insecure front strap rotten and broken (6.1.3 (a) (i)) | 1 |
| Front Service brake imbalanced across an axle offside front brake flexi hose collapsed internally (1.2.1 (b) (i)) | 1 |
| Front All outline marker lamps not working |4.2.1 |a|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer cab sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded front mount |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded strut mounting |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded s/absorber |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded s/absorber |2.4.A.3| | 1 |
| Offside Front Electrical wiring insecure and connectors likely to become disconnected (4.11 (a) (ii)) | 1 |
| Brake load sensing valve defective and function impaired seized |3.6.E.3| | 1 |
| Lower Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger rear of the leaf spring |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger front of spring |6.1.B.2| | 1 |
| Nearside Front Brake pipe inadequately clipped pipe to hose |3.6.B.1| | 1 |
| Nearside Rear Upper Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Anti-roll bar fractured both sides |5.3.3 |b| |ii|| | 1 |
| Anti-roll bar ball joint likely to become detached drop links both sides |5.3.4 |a| |ii|| | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside and off side rear |5.3.6 |a| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed (6.2.2 (d) (i)) | 1 |
| Rear Lower Statutory seat belt missing rear seat full of equipment |5.1.1| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush bush |2.4.G.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn x2 d bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn Bolts loose (5.3.4 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i)) | 1 |
| Front Anti-roll bar pin or bush excessively worn Inner d bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Inner Body has a sharp edge caused by damage sill |6.1.C.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill, with in 30 cm of spring mountig |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers step, under neath. |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill x2 places |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded chassy |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded out riggers |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded rear valance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected REAR CHASSIS SECTION WITHIN 30 CM TO SPRING EYE |5.3.6 |a| |ii|| | 1 |
| Offside Rear Leaf spring main leaf fractured FRONT SPRING EYE |5.3.1 |b| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step 2 places (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Centre Front drive shaft damaged |2.5.C.2a| | 1 |
| Offside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
| Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 1 |
| Front Front suspension has excessive movement at a wishbone pin or bush both rear bushes seperated |2.5.A.1c| | 1 |
| Fuel tank insecure both tank straps corroded to the point of imminent failure (6.1.3 (a) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded under bonnet area (1.1.21 (e) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2| | 1 |
| Offside front brake binding brake dose not release right away when peddle released |3.7.B.1| | 1 |
| Rear Exhaust system insecure Rear exhaust tailpipe insecure (6.1.2 (a)) | 1 |
| Nearside Rear Road wheel fixing missing 1 x Wheel Nut missing from NSR wheel (5.2.1 (a) (i)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp with side light |1.4.A.2h| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Spring mount rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Spring mount front |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch to floor (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to exhaust blow |7.3.A.1| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working 2 marker |1.1.A.3b| | 1 |
| Nearside Rear Front position lamp|s| not working marker |1.1.A.3b| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement both d |2.4.G.2| | 1 |
| Body has a sharp edge caused by damage both rear bumper corners missing |6.1.C.1| | 1 |
| Body insecure and dangerous to other road users rear bumper |6.1.B.1b| | 1 |
| Rear fog lamp not working nearside |1.3.2b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and step |6.1.B.2| | 1 |
| Central Front Brake pipe inadequately clipped to rear |3.6.B.1| | 1 |
| Nearside Front Lower Fuel system component insecure |7.2.1| | 1 |
| Offside Rear Seat belt buckle not functioning as intended single seat receiver damaged |7.1.2 |d|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (front spring eye) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked |5.3.6 |a| |i|| | 1 |
| Nearside Stop lamp|s| not working n/s rear brake light out |4.3.1 |a| |ii|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner door step |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s rear inner sill corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced body support |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch corroded |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s rear inner support corroded |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s front inner sill corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper door step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s rear inner sill corroded |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear both n/s o/s chassis out riggers [near back of spring hangers ] corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Drive shaft uj which forms part of the suspension has excessive play in a universal joint prop shaft bush |2.4.G.4b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded rear most |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear most |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front most |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded innerwing/ inner wheel arch numerous holes |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded cross member at the rear of cab |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outersill numerous |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outersill numerous |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded of the cab numerous |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded of the cab numerous |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded rear of cab |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded inner sill, outer sill |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing, 2 places |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing, 2 places |2.4.A.3| | 1 |
| Rear Brake drum contaminated (1.1.14 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step all over and to chassis |5.3.6 |a| |i|| | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both lower ball joints |5.3.4 |b| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inside wheel arch behind suspension strut (6.2.2 (d) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury Outer sill (6.2.1 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury Outer sill (6.2.1 (a) (i)) | 1 |
| Fuel tank insecure front strap corroded and holed |7.2.1| | 1 |
| Centre Front Upper Fuel pipe leaking |7.2.3| | 1 |
| Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear inner sills at spring anchor (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both inner and outer rear sills at swinging shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger at swinging shackle (5.3.6 (a) (i)) | 1 |
| Service brake excessively binding Both rear (1.2.1 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel tub |shock absorber top mount| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel tub |shock absorber top mount| |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel tub |swinging shackle| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel tub |swinging shackle| |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis rail below drivers seat |5.2.6| | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel |steering rack fitted| |2.3 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis ( in wheel arch area) (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch close to upper suspension strut top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded ARCH |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the fuel tank |6.1.B.2| | 1 |
| Rear All outline marker lamps not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting crossmember |6.6.6| | 1 |
| Offside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting crossmember |6.6.6| | 1 |
| Nearside Rear Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer/inner sill. (5.3.6 (a) (i)) | 1 |
| Rear position lamp|s| incorrect colour no lens on lamp on cherry picker - showing white light to rear |1.1.A.3e| | 1 |
| Nearside Front Valve stem seriously damaged badly cracked |4.1.D.1e| | 1 |
| Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement inner D bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement inner D bush |2.4.G.2| | 1 |
| Offside Track rod end ball joint has excessive play & dust boot split |2.2.B.1f| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under vallance |2.4.A.3| | 1 |
| Emissions not tested excess smoke |7.4.B.1| | 1 |
| Nearside Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength outer sill |2.4.A.3| | 1 |
| Nearside Ball joint has excessive play rack end |2.2.B.1f| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheeel arch |2.4.A.3| | 1 |
| Offside Rear Upper Leaf spring eye defective |shackle| front shackle broken |2.4.B.1b| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both side jacking points and sils |6.1.B.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded brake cable rear x-member |1.1.21 |e| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides outriggers at leaf spring front mountings |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x-member+ both outriggers at leaf spring rear mountings |5.3.6 |a| |i|| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting rear x-member |6.1.6 |i| |i|| | 1 |
| Rear Front drive shaft support bearing excessively worn |2.5.C.2c| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer step sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer step sill |5.3.6 |a| |i|| | 1 |
| Front Power steering pipe|s| or hose|s| leaking from a joint at steering rack. |2.3.3b| | 1 |
| Offside Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Fuel cap/sealing device ineffective fuel cap lock seized (6.1.3 (b) (i)) | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached movement on bottom fixing (5.3.3 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached de-bonding (5.3.4 (a) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front step area into box sections excessively corroded and weak (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front step area into box sections excessively corroded and weak (6.1.1 (c) (i)) | 1 |
| Brake pipe connection leaking on a hydraulic braking system repaired pipe into abs unit (1.1.11 (b) (ii)) | 1 |
| Nearside Front Upper Side repeater not working |1.4.A.2c| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting silll/step (6.2.2 (d) (i)) | 1 |
| Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/step (6.1.1 (c) (i)) | 1 |
| Nearside Upper Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Lower Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step area chalked (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area chalked (7.1.1 (a) (i)) | 1 |
| Nearside Outer Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Outer Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Outline marker lamp not working center |4.2.1 |a|| | 1 |
| Offside Rear Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Offside Outline marker lamp not working center |4.2.1 |a|| | 1 |
| Fuel tank insecure Broken support strap |7.2.1| | 1 |
| Nearside Front Suspension has inadequate clearance with the chassis |2.4.A.1a| | 1 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush spring also corroded badly |2.4.B.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` wipers |8.3.1b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch o/s front |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings by spring hanger |6.1.B.2| | 1 |
| Outer Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Inner Front Lower Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bed |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bed |6.1.B.2| | 1 |
| Nearside Rear brake disc cracked |3.5.1h| | 1 |
| Nearside Rear Obligatory mirror does not provide a view to the rear damaged (3.3 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holes (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device does not fasten securely by positive means wrong type |7.2.4b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded floor-chassis under seats and above fuel tank in 3 places |5.2.6| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded floor-chassis in 3 places |3.1.9| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bush drivers rear-roll bar fixing badly distorted |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush and offside rear |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement and offside rear |2.4.G.2| | 1 |
| Nearside Rear Bonded suspension unit deteriorated and cannot function as intended and offside rear bump stops |2.4.F.3| | 1 |
| Exhaust has a major leak of exhaust gases boxes split |7.1.2| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front inner arch |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides inner sill |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear bump stop |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides door step |6.2.2 |d| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bumpstop |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bump stop |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner whhel arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch x2 |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Fuel cap/sealing device mounting flange/sealing method defective |6.7.2b| | 1 |
| Offside Lower Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/inner arch holed by shock absorber (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring |5.3.6 |a| |ii|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s outer sills
n/s and o/s inner sills and steps
o/s/r inner wheel arch/floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch/ chassis |6.1.B.2| | 1 |
| Body has a sharp edge caused by damage front grill |6.1.C.1| | 1 |
| Nearside Front Braking system leaking hose joint at caliper |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut area/ inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch - crossmember mounting |2.4.A.3| | 1 |
| Offside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement lower front arm rear bush |2.4.G.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering quarter |6.1.A.1| | 1 |
| Central Front Power steering pipe/hose leaking Around the steering rack (2.1.5 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp not working none |1.2.1b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect loose as well |1.8.A.1b| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing not fixed and holed |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmemebr (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill/step |5.2.6| | 1 |
| Rear Towbar component excessively corroded complete towbar mounting |6.6.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner, outer sills. |5.2.6| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Nearside Front Braking system leaking FLEXI BANJO BOLT LEAKING |3.6.A.1| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp with stop light indicator & fog light |1.1.A.3f| | 1 |
| Front Statutory seat belt missing center |5.1.1| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nearside front inner sill and outer sill corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting offside front inner sill and outer sill corroded. (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch inner and outer corroded. (6.2.2 (d) (i)) | 1 |
| Nearside Outer Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Nearside Outer Front Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Offside Outer Front Lower Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
| Nearside Outer Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Leaf spring eye defective |shackle| front spring eye |2.4.B.1b| | 1 |
| Offside Rear Leaf spring eye defective |shackle| front spring eye |2.4.B.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger end |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mounting |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/inner sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/inner wheelarch/ |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch/floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer/inner step |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills |5.3.6 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated Door Step Area |6.2.4 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above rear axle (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above rear axle (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear cross member (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear cross member (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near wheel arch (6.2.2 (d) (i)) | 1 |
| Prop shaft bearing excessively worn support (6.1.7 (b) (i)) | 1 |
| Service brake effort inadequate at a wheel both rear (1.2.1 (a) (i)) | 1 |
| Rear Exhaust system not adequately supported bracket broken |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing near outrigger rear spring mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6| | 1 |
| Offside Inner Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Nearside Rear Body component damaged and likely to cause injury light unit (6.2.1 (a) (i)) | 1 |
| Prop shaft bearing excessively worn support bearing (6.1.7 (b) (i)) | 1 |
| Nearside Front Outer Seat belt installation anchorage insecure (10.1 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body |6.1.B.2| | 1 |
| Offside Rear Direction indicators incorrect colour light lenze cracked |1.4.A.2f| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quarter pannel |6.1.B.2| | 1 |
| Centre Torque/reaction arm has excessive play in a pin/bearing prop bearing /bush |2.4.G.2| | 1 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step/sill including under-side inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step under-side (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor at shock absorber (5.3.6 (a) (i)) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 4.68 M1 |7.4.B.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg-top-see from bonnet area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded arch in places-under wing |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill in places and previous repair not to standard!! |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis and rear panal in places and poor previous repair |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear floor-wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis-wheel arch area-remove wheel to see clearly |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis-rear panal holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded arch holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor-arch holed-wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis-wheel arch area-remove wheel to see clearly |2.4.A.3| | 1 |
| Seat belt locking mechanism does not secure or release 1st row of seats middle belt buckle trapped |5.2.5a| | 1 |
| Nearside rear brake recording little or no effort very poor |3.7.B.5a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded os inner sill, ns inner sill and osr cross member |5.2.6| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside marked in yellow |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underside marked in yellow |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch marked in yellow |6.2.2 |d| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal welding not adequate not seam welded |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play steering tie rod (2.1.3 (b) (i)) | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked in yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside step |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch floor pan marked in yellow |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle and chaffed rubbing on chassis |2.3.2| | 1 |
| Offside Power steering pipe|s| or hose|s| leaking steering Rack/ possible pipe? |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger in 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger in 3 places |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sub frame fixing |6.1.B.2| | 1 |
| Rear Parking brake inoperative on one side low effort both sides (1.4.1 (a)) | 1 |
| Nearside brake disc excessively pitted |3.5.1g| | 1 |
| Offside brake disc excessively pitted |3.5.1g| | 1 |
| Hazard warning lamps inoperative ON THE OFFSIDE |1.4.B.1b| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail holed behind subframe |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail holed on outer face above axle |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail holed on outer face |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember holed at joint to rail |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch to floor joint holed |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top strut area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top strut area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting area |rear| |2.4.A.3| | 1 |
| Offside Front Rear reflector missing |1.5.1a| | 1 |
| Fuel system component leaking excessively or a risk of fire leaking at injectors |6.1.3 |b| |ii|| | 1 |
| Central Rear Reversing lamp inoperative (4.6.1 (a)) | 1 |
| Nearside Front Upper Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i)) | 1 |
| Offside Rear Brake lining|s| contaminated backing plate showing signs of fluid leak |1.1.13 |b|| | 1 |
| Nearside Rear Leaf spring fractured rear spring eye broken |5.3.1 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step area sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step area inner sill |7.1.1 |a| |i|| | 1 |
| Prop shaft bearing excessively worn Centre (6.1.7 (b) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Centre mount side (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Centre mount side and top (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Rear spring mounting x2 (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded off side front inner sill / understep area |5.2.6| | 1 |
| Ball joint has excessive play off side inner steering rack tie rod |2.2.B.1f| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated cable broken |3.1.3c| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member both rear |2.4.A.3| | 1 |
| Emissions not tested engine noise |7.3.A.1| | 1 |
| Nearside Body has a sharp edge caused by damage mirror backing missing |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chalked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill -chalked (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel by seat belt mount |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel by seat belt mount |6.2.2 |d| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded by suspension |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded by suspension |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on inner side sill at centre rear |6.1.B.2| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting offside inner sill corroded front to rear. (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting nearside inner sill corroded front to rear. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step/floor |5.2.6| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis leg by load sensing valve |3.3.A.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing and chassis leg |2.4.A.3| | 1 |
| Lower passenger door hinge insecure |6.2.B.2| | 1 |
| Offside Rear Brake linkage has restricted free movement |3.5.1k| | 1 |
| Suspension component mounting prescribed area is excessively corroded off and nearside inner wings corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength patch on chassis not welded all the way around |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch chassie |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top chassis leg |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded engine bay |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded anchor mount |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded anchor mount |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill (6.2.2 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arches 3 holes (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch 4 holes (6.2.2 (d) (i)) | 1 |
| Centre Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear spring hanger |6.1.B.2| | 1 |
| Fuel system component leaking by fuel pump |7.2.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component corroded and seriously weakened next to shocker (5.3.3 (b) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper chassis,above crossmember |6.1.B.2| | 1 |
| Offside Front Upper Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back end of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength back ed of leaf spring x2 (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering VEHICLE CORROSION EXCESSIVE ON SILLS AND CHASSIS |6.1.A.1| | 1 |
| Nearside Rear Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x 4 |2.4.A.3| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Front Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Offside Front Inner Body insecure to the extent that stability is seriously impaired sill/step |6.2.2 |a| |ii|| | 1 |
| Nearside Front Inner Body insecure to the extent that stability is seriously impaired sill |6.2.2 |a| |ii|| | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired box section |6.2.2 |a| |ii|| | 1 |
| Offside Rear Body insecure to the extent that stability is seriously impaired box section |6.2.2 |a| |ii|| | 1 |
| Nearside Rear Upper Body insecure to the extent that stability is seriously impaired floor |6.2.2 |a| |ii|| | 1 |
| Nearside Rear Outer Body insecure to the extent that stability is seriously impaired sill |6.2.2 |a| |ii|| | 1 |
| Offside Rear Outer Body insecure to the extent that stability is seriously impaired sill |6.2.2 |a| |ii|| | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Front Upper Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Centre Brake pipe inadequately clipped pipe |3.6.B.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings full sill |6.1.B.2| | 1 |
| Offside Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rearmost |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rearmost |2.4.G.2| | 1 |
| Front Service brake juddering severely |3.7.C.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |chaulked| |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near fuel tank |chaulked| |6.1.B.2| | 1 |
| Subframe mounting prescribed area is excessively corroded both sides front underwheel arches chassis |2.4.A.3| | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/ load area (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer close to suspension (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner upper (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner upper (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear wheel arch load area (6.1.1 (c) (i)) | 1 |
| Offside Brake valve has an excessive discharge of oil |3.6.E.1| | 1 |
| Offside Rear fog lamp emits a light other than red Lens broken/damaged |1.3.2e| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Front & centre area |5.2.6| | 1 |
| Nearside Leaf spring main leaf fractured (5.3.1 (b) (ii)) | 1 |
| Rear fog lamp not working no tell tail light |4.5.1 |a| |ii|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn wish bone bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Anti-roll bar linkage pin or bush excessively worn link rod bush |5.3.4 |a| |i|| | 1 |
| Prop shaft bearing excessively worn X2 (6.1.7 (b) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced behind cab (6.1.1 (a) (i)) | 1 |
| Fuel system component leaking fuel filter housing |7.2.3| | 1 |
| Nearside Front Vehicle structure has a fracture which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering chassis |6.1.A.1| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill and step |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill and step |6.1.1 |c| |i|| | 1 |
| Offside Inner Rear Lower Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced main beam |1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting box section |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front shackle |2.4.A.3| | 1 |
| Offside Rear Body panel corroded and likely to cause injury quarter |6.2.1 |a| |i|| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rear rack |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most outer rigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength panel behind bumper |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet by engine mount |5.3.6 |a| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill rotted |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step rotted |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill rotted |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger chassis rotted |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger chassis rotted |6.1.B.2| | 1 |
| Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c)) | 1 |
| Central Other passenger door cannot be opened from outside the vehicle Unable to check rear seats and belts (6.2.3 (a)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill & step |5.2.6| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner steps x2 |6.1.B.2| | 1 |
| Offside Front Inner Brake disc significantly and obviously worn surface corroded and worn (1.1.14 (a) (i)) | 1 |
| Offside Power steering component leaking steering rack leaking (2.1.5 (a)) | 1 |
| Power steering component leaking steering rack leaking (2.1.5 (a)) | 1 |
| Rear fog lamp not working tell tale in-op (4.5.1 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded box section, Marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded box section, Marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded corner, Marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corner, Marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear box section, Marked yellow |2.4.A.3| | 1 |
| Offside Front Shock absorber insecure Bolt loose |2.7.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch, marked yellow |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step and inner sill, marked yellow |5.2.6| | 1 |
| Offside Front Upper Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Fuel system component leaking diesel leak from pump region |7.2.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded CHASSIS UNDER BONNET |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded UNDER ARCH |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill and chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle area |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing and chassis |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately clipped near alternator |3.6.B.1| | 1 |
| Rear Brake load sensing valve obviously incorrectly adjusted rear brakes low effort |3.6.E.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear spring hangers |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside front and rear spring hangers |6.1.B.2| | 1 |
| Central Rear Towbar excessively corroded within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis front spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear spring hanger x2 |2.4.A.3| | 1 |
| Offside Outer Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded step/sill |5.2.6| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion body side |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion body side |6.1.C.1| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner rail under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Position lamp not working marker (4.2.1 (a) (ii)) | 1 |
| Offside Front Steering linkage has had excessive heat applied |2.2.C.1e| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill patch |6.1.B.2| | 1 |
| Rear Exhaust system not adequately supported rubber split |7.1.1| | 1 |
| rear brake recording little or no effort both rears little effort when footbrake operated |3.7.B.5a| | 1 |
| Power steering pipe/hose excessively corroded pipe to rack |2.1.5 |g| |i|| | 1 |
| Nearside Front Brake hose excessively twisted fouling shock absorber |1.1.12 |b| |ii|| | 1 |
| Nearside Outer Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Offside Front Brake inadequately mounted (1.1.21 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength in front of spring (5.3.6 (a) (i)) | 1 |
| Front Exhaust system insecure flexy (6.1.2 (a)) | 1 |
| Stop lamp(s) remains on when the brakes are released while side lights on (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury door (6.2.1 (a) (i)) | 1 |
| Nearside Lower Body panel corroded and likely to cause injury sliding door (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury wing (6.2.1 (a) (i)) | 1 |
| Stop lamp(s) all not working while side lights on (4.3.1 (a) (iii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner + outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (by fuel tank) (7.1.1 (a) (i)) | 1 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted |1.1.17 |b|| | 1 |
| Offside Body component corroded and likely to cause injury side body holed in many areas (6.2.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced B pillar around door catch (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced complete inner step and sill in few places (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch rear and above road wheel (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch rear and above road wheel (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under side of outer step in several places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member above and just to the rear of the shocker bolt (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member above and just to the rear of the shocker bolt (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner door step area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step to sill backing area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and nearside rear by spring mts areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under boonet and inner wing and under vechcle by subframe |5.3.6 |a| |i|| | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting centre box section |6.1.6 |i| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill chalked |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quarter chalked |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner quarter chalked |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch chalked |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside engine bay chalked |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded top shoker |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded top shoker |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front of spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front of spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of spring x3 (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg x2 (6.1.1 (c) (i)) | 1 |
| Rear Seat belt retracting mechanism defective rear facing -closest to door (7.1.2 (e)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill )(rear seat mounting (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill )(rear seat mounting (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring mounting (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outriger to spring mount (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch )(within 30cm to top mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Central Front Exhaust has a major leak of exhaust gases middle box (6.1.2 (a)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Out Rigger |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Middle Out Rigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Out Rigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door Step |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Lower Front passenger door hinge insecure |6.2.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger varous |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s door shut |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill
complete
inner/outer (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill
complete
inner/outer (6.2.2 (d) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Wing
|6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure front strap (6.1.3 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underneath by seat bolt fixings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis around front and rear mounts of rear spring several places |5.3.6 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Around rear spring mounts several places |5.3.6 |a| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected ReAr inner sill |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill |5.3.6 |a| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Rear Ross member |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Direction indicator incorrect colour holed |1.4.A.2f| | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced in engine bay |2.4.G.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded centre of step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded upper shock absorber mounting, outer chassis |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mounting, outer chassis |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mounting, inner chassis |2.4.A.3| | 1 |
| Exhaust system not adequately supported rear section insecure |7.1.1| | 1 |
| Nearside Rear Outer Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing. |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded step. |2.4.A.3| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement temporary type fitted |7.2.4b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FULL NEARSIDE SILL UNDERSIDE - FRONT TO REAR |6.1.B.2| | 1 |
| Offside Front Outer Body has a projection caused by corrosion sill x2 spots |6.1.C.1| | 1 |
| Offside Rear Inner Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Offside Front Body has a projection caused by corrosion door step |6.1.C.1| | 1 |
| Nearside Inner Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Offside Rear Inner Body has a projection caused by corrosion outrigger |6.1.C.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides front leaf spring mount areas both sides sills inner and outter |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail sube frame area |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember at handbrake |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases front pipe |broken off |7.1.2| | 1 |
| Emissions not tested due to exhaust blow |7.4.B.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner valance |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner valance |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shocker mount area |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner step area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger & inner arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower panel |inner & outer |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer panel insecure |full panel |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassia outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step area |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor & inner arch area |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor & inner arch area |6.2.2 |d| |i|| | 1 |
| Offside Front Anti-roll bar linkage severely distorted rubbing off front shocker |2.4.G.1| | 1 |
| Nearside Front Suspension arm corroded and seriously weakened arm holed |2.4.G.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner valance at top shocker mounting |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner valance holed at outrigger |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor holed at n/s/r leaf spring|front most| |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step area holed in 3 places |6.1.B.2| | 1 |
| Battery insecure and likely to fall from carrier both batterys |4.13 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ourigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x-member |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x-member |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Axle swivel joint has excessive movement between a swivel joint and its housing |2.5.A.1b| | 1 |
| Central Rear Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Offside Rear Parking brake inoperative on one side drivers side (1.4.1 (a)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner / outer sill areas |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis leg areas |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill areas |5.2.6| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load floor and several load cross members including fixing cross member |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion drop sides lower edges |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member at spring front mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member at spring front mount |2.4.A.3| | 1 |
| Electrical wiring damaged and bare wires exposed rear trailer socket |1.9.2c| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded innerwing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Nearside Rear Additional braking device component|s| insecure |3.6.I.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded marked yellow, inner sill both sides |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by upper anti roll bar mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring mount |2.4.A.3| | 1 |
| Offside Rear Air suspension unit damaged and likely to fail |2.4.D.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step corroded |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x4 |2.4.A.3| | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both sides (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar linkage insecurely attached Both sides (5.3.3 (a) (i)) | 1 |
| Nearside Rear Position lamp showing white light to the rear and indicator ( lenz damaged ) (4.2.3 (a) (ii)) | 1 |
| Offside Front All outline marker lamps not working |4.2.1 |a|| | 1 |
| Nearside Front All outline marker lamps not working |4.2.1 |a|| | 1 |
| Steering lock stop missing not working (2.1.4 (b)) | 1 |
| Nearside Rear Braking system leaking Backplate |3.6.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rearward hanger in two areas |2.4.A.3| | 1 |
| Upper Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| Outer Rear Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded out rigger x2 places |2.4.A.3| | 1 |
| Nearside Rear Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill by rear most hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill by rear most hanger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch shock top mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill behind wheel |2.4.A.3| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded front of spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch above suspension arm |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded behind front spring mount |2.4.A.3| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect dip image incorrect (4.1.2 (c)) | 1 |
| Nearside Front Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 1 |
| Inner passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
| Lower Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Outer Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Seat belt adjustment fitting fractured |5.2.3| | 1 |
| Offside Rear brake drum contaminated by oil Drum oil leaks |3.5.1h| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded Inner step sill corroded within prescribed area |5.2.6| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded Arch |3.6.C.3| | 1 |
| Front Outline marker lamp missing Both roof markers |4.2.1 |a|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment Hand brake travel to high |1.1.6 |c|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch |6.1.1 |c| |i|| | 1 |
| Rear Prop shaft flexible coupling excessively deteriorated Both bearing rubber supports (6.1.7 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Lower step corroded holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring hanger |6.1.B.2| | 1 |
| Bonnet primary retaining device ineffective wont open |3.1 |c|| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Rear Brake linkage excessively worn and seriously weakened |3.5.1e| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Step area |5.2.6| | 1 |
| Front Steering arm has relative movement at its fixings both sides |2.2.B.1h| | 1 |
| Nearside Rear Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. |6.9.3| | 1 |
| Body has a sharp edge caused by corrosion both sides of metal storage box |6.1.C.1| | 1 |
| Nearside Steering arm has relative movement at its fixings tie rod |2.2.B.1h| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch area by strut top mount |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch area by strut top mount |6.1.A.1| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill corroded by leaf spring mount |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill corroded by leaf spring mount |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer rigger |rear spring mounting area| |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer rigger corroded in two places |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg by shock absorber mount |6.1.A.1| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch area/ shock mount |6.1.A.1| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill correded |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill end corroded |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill end corroded |6.1.A.1| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Offside Brake cable knotted (1.1.15 (a)) | 1 |
| Nearside Front Lower Sub-frame pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor area |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected crossmember |1.1.21 |e| |ii|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar link mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength [front mount] |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 1 |
| Offside Front Outer Body has a sharp edge caused by damage Door handle |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area. |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill area. |2.4.A.3| | 1 |
| Brake disc significantly and obviously worn both front |1.1.14 |a| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above front subframe |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outersill x2 patches |2.4.A.3| | 1 |
| Front Fuel system component leaking injector |7.2.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring x5 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring x5 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch
|2.4.A.3| | 1 |
| Driver`s seat insecure lower bar broken |6.2.A.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded x member rear of cab |3.1.9| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion butt |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step area |5.3.6 |a| |i|| | 1 |
| Front Fuel tank insecure strap snapped |7.2.1| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassi |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded loading valve |3.3.A.2| | 1 |
| Offside Rear Upper Suspension has inadequate clearance with the chassis |2.4.A.1a| | 1 |
| Nearside Rear Upper Suspension has inadequate clearance with the chassis |2.4.A.1a| | 1 |
| Nearside Rear Upper An item not tested |Manual| | 1 |
| Offside Rear Upper An item not tested |Manual| | 1 |
| Nearside Rear Upper Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Rear reflector insecure complete light cluster incorrect diretion |1.5.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail,by engine mounting |2.4.A.3| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ARCH HOLED |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ARCH HOLED |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS HOLED |6.1.B.2| | 1 |
| Front Lower engine mounting bracket fractured and likely to fail |6.1.D.1b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under door step |5.2.6| | 1 |
| Power steering malfunctioning STEERING EXCESSIVLEY HEAVY |2.3.3a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded STEP AREA |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH TUB |2.4.A.3| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement both sides front arm rear bushes |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides front inner arches |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering viewable from engine bay |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering viewable from wheel arch |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis holed viewed from under bonnet marked in yellow |6.1.A.1| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis holed marked in yellow viewed from wheel arch |6.1.A.1| | 1 |
| Nearside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded Chassis cross member above fuel tank to rear of cab |3.1.9| | 1 |
| Nearside Front Outer Body has a sharp edge caused by corrosion wing holed |6.1.C.1| | 1 |
| Offside Front Outer Body has a sharp edge caused by corrosion wing holed |6.1.C.1| | 1 |
| Offside Front Outer Body has a sharp edge caused by corrosion Seal holed |6.1.C.1| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded Wing behind Suspension leg marked in yellow |2.4.A.3| | 1 |
| Offside Rear Leaf spring eye defective |anchor| Front eye |2.4.B.1b| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear bush parted |2.5.A.1c| | 1 |
| Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement both anti roll bar D bushes worn |2.4.G.2| | 1 |
| rear brake recording little or no effort Both rears low |3.7.B.5a| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |anchor| rear axle front anchor bush failed |2.4.B.4| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger behind o/s rear spring corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner sill behind rear wheel corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear floor to inner wheel arch corroded through |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front chassis top under bonnet corroded through |6.1.B.2| | 1 |
| Exhaust system not adequately supported exhaust tailpipe holed and bracket broken off |7.1.1| | 1 |
| Fuel hose leaking leak off |6.1.3 |b| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step sill o/s/f floor |5.2.6| | 1 |
| Subframe mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch tub |6.1.B.2| | 1 |
| Power steering component|s| leaking around rack |2.3.3b| | 1 |
| Nearside Seat belt affected by an insecure seat fixing |5.1.B.2b| | 1 |
| Offside Seat belt affected by an insecure seat fixing |5.1.B.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger x2 |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill x 2 |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill x 2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chasssi |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded crossember |2.4.A.3| | 1 |
| Power steering component leaking Rack |2.1.5 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/wheel arch |2.4.A.3| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb insecure |1.8.A.1b| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D/bush |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D/bush |2.4.G.2| | 1 |
| Offside Front Road wheel fractured (5.2.2 (a)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel pan/ spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front passenger door catch insecure corroded (6.2.3 (c) (ii)) | 1 |
| Offside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible Bolt Hole elongated (5.3.1 (a) (ii)) | 1 |
| Front Exhaust has a major leak of exhaust gases Flexi pipe and first and second silencers (6.1.2 (a)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s sill corroded with in 30 cm of spring hanger (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s sill corroded with in 30 cm of spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower outer wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill x2 |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Door step |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross section |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross section |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded Brake pipe flexi mounting |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross section |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner door shut/step |5.2.6| | 1 |
| Central Seat belt anchorage prescribed area is excessively corroded heavy corrosion around front prop shaft mounting and above fuel tank |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded 2nd to rear cross member |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded 2nd to rear cross member |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner door step |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner door step |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch 3 areas |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill and step |5.2.6| | 1 |
| Nearside Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd from rear crossmember (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced various areas (6.1.1 (c) (i)) | 1 |
| Floor excessively deteriorated tipper (6.2.4 (a) (i)) | 1 |
| Offside Stop lamp obviously incorrectly positioned |1.2.1a| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of cab (6.1.1 (c) (i)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced of cab hand bake cable fixing crossmember (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2nd from rear (6.1.1 (c) (i)) | 1 |
| Nearside Dropside damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Dropside damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Tailgate damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Rear Body insecure crossmembers corroded and missing (6.2.2 (a) (i)) | 1 |
| Offside Rear Body component insecure mud gaurd (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body component insecure mudgaurds (6.2.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member behind axle (6.1.1 (c) (i)) | 1 |
| Prop shaft bearing housing likely to fail 2nd bearing (6.1.7 (f) (ii)) | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp affected by indicator |1.1.A.3f| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis / crossmember |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis / crossmember |6.6.6| | 1 |
| Nearside Inner Rear Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing behind wheel (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage attachment bracket/mounting likely to fail bolt (5.3.3 (b) (ii)) | 1 |
| Position lamp not working front and rear (4.2.1 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside doorstep under side (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded between bulkhead and subframe mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Under wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Under wheel arch several areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under wheel arch several areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sills (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting foot step (6.2.2 (d) (i)) | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yelliw |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under footstep |6.1.B.2| | 1 |
| Front Brake disc contaminated both sides (1.1.14 (b)) | 1 |
| Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt both sides (2.1.3 (g) (ii)) | 1 |
| Front Suspension arm pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Rear Leaf spring anchor bracket damaged and seriously weakened FORWARD BUSH EYELET BROKEN. (5.3.1 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under front wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under front wheel arch (5.3.6 (a) (i)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor behind all seats rusted through (7.1.1 (a) (i)) | 1 |
| Centre Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear of spring inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear of spring chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front of spring inner sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded top of near side rear chassis rail |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded top of off side rear chassis rail |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outersill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outersill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Prop shaft bearing excessively worn primary coupling |6.1.7 |b| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door shut |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring rear mount |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded via under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2| |2.4.A.3| | 1 |
| Electrical wiring inadequately supported underside vehicle |1.9.2a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer step |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded behind seats |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded behind seats |5.2.6| | 1 |
| Offside Front Lower Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Body has a sharp edge caused by damage mirror back |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded body outrigger |2.4.A.3| | 1 |
| Emissions not tested cat missing |8.2.2.2 |e|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill - 3 areas marked |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill - marked |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under passenger step |6.1.B.2| | 1 |
| Offside Rear Leaf spring main leaf fractured broken at eye |5.3.1 |b| |ii|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer chassis leg above rear axle |6.1.1 |c| |i|| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is fractured chassis |3.1.9| | 1 |
| Offside Rear Driver`s seat insecure |6.2.A.1| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both centre outer sills (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Inner Front Lower Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis leg at fuel tank |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded at top strut mount area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded top strut mount area |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported AND CENTRE |7.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis over rear axle (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis over rear axle (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis / inner wing/ turret (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis /inner wing /turret (5.3.6 (a) (ii)) | 1 |
| Fuel tank so insecure there is a risk of fire mounting straps corroded (6.1.3 (a) (ii)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect Due to bulb not fitted correctly (4.1.2 (c)) | 1 |
| Nearside Front Coil spring mounting fractured |2.4.C.3b| | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner sill panel corroded within 30cms of anchor mounting point (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 1.04 max limit 0.68 |8.2.2.2 |a|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear lower panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Lower panel |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe |5.3.6 |a| |i|| | 1 |
| Nearside Front position lamp|s| not working dip beam |1.1.A.3b| | 1 |
| Offside Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Offside Outline marker lamp not working rear most |4.2.1 |a|| | 1 |
| Nearside Outline marker lamp not working front most |4.2.1 |a|| | 1 |
| Brake load sensing valve inoperative and ABS not fitted or inoperative leaking |1.1.17 |c| |ii|| | 1 |
| Central Seat belt missing (7.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill marked with chalk |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member marked with chalk |2.4.A.3| | 1 |
| Towbar attachment insecure tow pin r clip missing (6.1.6 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mounting area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure chassis main member corroded |6.1.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s o/s inner and outer sills |6.1.B.2| | 1 |
| Nearside Front position lamp|s| not working on cab |1.1.A.3b| | 1 |
| Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement x 2 D bush |2.4.G.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Rear Parking brake inoperative on one side both sides |1.4.1 |a|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp by fog lamp |4.2.3 |c|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step |7.1.1 |a| |i|| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle or from inside |6.2.B.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer seal/arch |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner seal x2 |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arche |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step inner sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by front spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by rear spring hanger x 2 |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by load censer arm |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by front spring hanger |6.1.B.2| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step inner sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill x2 |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded at inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at inner arch |2.4.A.3| | 1 |
| Nearside Rear Axle swivel joint has excessive movement between a swivel joint and its housing inwards and outwards movement in wheel |2.5.A.1b| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded side and lower of crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember holed . |2.4.A.3| | 1 |
| Offside Rear Exhaust system not adequately supported mountings broken off !!! |7.1.1| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner side wall . |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch to floorpan .holed . |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe/chassis area (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch area including sub frame mounting area (6.2.2 (d) (i)) | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view sharp edges |8.1.2a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch front and rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch rear |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger near leaf spring shackle mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger near leaf spring shackle mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp Affected by sidelight (4.4.3 (b)) | 1 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp Not working when sidelights switched on (4.3.3 (b)) | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired Not continuously seam welded satisfactorily (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn Rear wishbone bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near load sensing valve (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced to sill/floor (7.1.1 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to chassis (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all 4 inner arches (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner and outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to brake comp (5.3.6 (a) (i)) | 1 |
| Offside Outer Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded Both side |2.4.A.3| | 1 |
| Offside Body component corroded and likely to cause injury seal |6.2.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength offside rear (5.3.6 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near leaf spring mounting point (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front and rear corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Near inner wheel arch area (6.2.2 (d) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside complete outer sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner sill corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill after wheel corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill after wheel corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner arch is corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bulkhead /chassis is corroded on inner side of chassis (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure rear exhaust system insecure bracket corroded (6.1.2 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above leaf spring (6.1.1 (c) (i)) | 1 |
| Central Front Exhaust silencer insecure casing detreated likely to become detached (8.1.1 (b) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x3 (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x2 (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Position lamp light intensity significantly reduced internal lamp fault affecting all lights when turned on together |4.2.3 |a| |ii|| | 1 |
| Nearside Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected x3 places on chassis leg, all marked in chalk |5.3.6 |a| |ii|| | 1 |
| Offside Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected marked in chalk |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis and floor |3.3.A.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill in 2 x places |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced holes in the sill and on the body (6.1.1 (a) (i)) | 1 |
| Brake lever pivot has excessive wear or free play (1.1.1 (b)) | 1 |
| Front Front position lamp|s| not working Both sides |1.1.A.3b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded jacking point area |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outrigger |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded suspention mouting |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded suspention mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded nner wing |2.4.A.3| | 1 |
| Offside Rear Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Front Brake cable inappropriately repaired |3.5.1n| | 1 |
| Nearside Brake pipe inappropriately repaired |3.6.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill all way down and damaged |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill all way down and damaged |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill all way down and damaged |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill all way down and damaged |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases both boxes |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor at rear |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear inner archers behind wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring x2 holes |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring hanger and quarter |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger and quarter |6.1.B.2| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings under wing section |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi section |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill section |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Front Steering column flexible coupling has excessive play |2.1.5| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded top of chassis |2.4.A.3| | 1 |
| Offside Outer Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Power steering pipe|s| or hose|s| leaking power steering pipe above rack |2.3.3b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect reflector came off adjusters? |1.8.A.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top inner wing |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor near to seat rear |5.2.6| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush rear |2.5.A.1c| | 1 |
| Nearside Front Leaf spring linkage pin excessively loose in its bracket |2.4.B.3a| | 1 |
| Offside Access panel cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis holed (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced innerchassis holed (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced innerwheelarch holed (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced innersill to step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch and floor holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near leaf spring holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch and floor holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion light bar |6.1.C.1| | 1 |
| Rear Body has a sharp edge caused by corrosion body rails |6.1.C.1| | 1 |
| Centre Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded |6.1.A.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings numerous points of corrosion running from front to rear |6.1.B.2| | 1 |
| Front All position lamps not working both |4.2.1 |a|| | 1 |
| Offside Rear Outer Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing by strut mount |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded lower |2.4.A.3| | 1 |
| Central Front Subframe mounting prescribed area is excessively corroded chassis top |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Rear Stop lamp missing |1.2.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on outer seal |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on outer seal |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded on outer seal |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded on outer seal |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on inner seal |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on inner seal |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded on inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded on inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on outer seal |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded on outer seal |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on inner seal |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded on inner seal |5.2.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner & outer sills entire length |6.1.B.2| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill as Marked (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill as Marked (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Leaf Spring Mount As Marked. (6.2.2 (d) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill as Marked (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wing as Marked (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wing as Marked (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Steering column universal joint insecure |2.1.5| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint bottom |2.5.B.1a| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre under sill corroded |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre under sill corroded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis corroded |2 places| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear under panel corroded |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member corroded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis corroded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear under panel corroded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step panel corroded |6.1.B.2| | 1 |
| Driver`s seat insecure Bolt / Fixing missing |6.2.A.1| | 1 |
| Offside Front Lower Front suspension has excessive movement at a suspension ball joint and welding noted |2.5.A.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front inner sill next to spring hanger as marked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill next to front spring hanger as marked |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded swinger end as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded swinger end as marked |2.4.A.3| | 1 |
| Nearside Front Lower Body has a sharp edge caused by corrosion step foot well as marked |6.1.C.1| | 1 |
| Nearside Lower Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Central Brake pipe leaking on a hydraulic braking system after fuel tank |1.1.11 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis structure |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced multiple areas front to rear reapired |6.1.1 |c| |i|| | 1 |
| Nearside Rear Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Offside Rear Axle swivel joint has excessive play |2.5.A.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/step |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| rack |2.2.A.1b| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn Inner bush |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm synthetic mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At leaf spring bracket mounting (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under bonnet check (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Passenger step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill arch |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush d |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired not seam welled were necessary (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear spring front mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering middle (6.1.1 (c) (ii)) | 1 |
| Nearside front parking |secondary| brake grabbing severely calliper maybe seizing |3.7.B.6b| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced Main beam |1.7.5a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded and offside inner sills |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded B pillar area |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Door step/ undersill areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Door step / undersill ,outersill areas |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded Rear chassis / crossmember |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis / crossmember |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Door pillar,door step/sill,undersill, chassis outrigger areas |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Doorstep /undersill, chassis outrigger areas |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Above chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis crossmember area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing area |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front inner arches (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mount (6.1.1 (c) (i)) | 1 |
| Suspension arm pin or bush excessively worn both front lower arms (5.3.4 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg near brake compensator |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg, near the top shocker mounting |6.1.B.2| | 1 |
| Nearside Front Body panel corroded and likely to cause injury Wing behind bumper (6.2.1 (a) (i)) | 1 |
| Nearside Front Body panel corroded and likely to cause injury Arch (6.2.1 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury Sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Arch (6.2.1 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury Arch (6.2.1 (a) (i)) | 1 |
| Rear Brake load sensing valve defective and function impaired sticking |3.6.E.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow|leaf spring mount area| |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step/inner sill under vehicle |5.2.6| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush. |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear bush. |5.3.4 |a| |i|| | 1 |
| Front Inner Brake disc significantly and obviously worn n/s o/s |1.1.14 |a| |i|| | 1 |
| Position lamp adversely affected by the operation of another lamp both |4.2.3 |c|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch strut mounting area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch strut mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting area front and rear |5.3.6 |a| |i|| | 1 |
| Direction indicators not working ALL |1.4.A.2c| | 1 |
| Brake pipe inadequately supported centre to rear |3.6.B.1| | 1 |
| Nearside Rear Body has a sharp edge caused by damage by side loading door |6.1.C.1| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill x 2 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill outrigger inner arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill lower wing |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner valance outrigger |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil
|6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing holed |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded holes box sections near hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded near hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill panel near anchor |2.4.A.3| | 1 |
| Body panel corroded and likely to cause injury front wings |6.2.1 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill x2 places |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch front and rear |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch front and rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring mount at chassie leg |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded door step x3 places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch upper |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded floor inappropriate repair |2.4.A.3| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings O/S & N/S REAR CHASSIS LEGS CORRODED ADJ TO BUMP STOP LOCATION |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/R INNER SILL ADJ TO O/S/R FRONT SPRING |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded located behind seat. marked. |5.2.6| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside. marked. near seat mountings. |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill. marked. |5.2.6| | 1 |
| Offside Brake cable insecure Cable worn threw rubbing on wheel |3.5.1d| | 1 |
| Fuel tank insecure Strap broken |7.2.1| | 1 |
| Front Track rod end ball joint has excessive play x2 |2.1.3 |b| |i|| | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip |6.1.7 |g| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills chalked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill chalked |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded chassis rail next to load valve and shocker mounting |2.4.A.3| | 1 |
| Rear Leaf spring fractured both sides |5.3.1 |b| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded door step/inner sill |5.2.6| | 1 |
| Offside Front Macpherson strut attachment bracket/mounting likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting corroded and seriously weakened chassis by leaf spring |5.3.3 |b| |i|| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting corroded and seriously weakened inner arch |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened inner arch |5.3.3 |b| |i|| | 1 |
| Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened inner arch |5.3.3 |b| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL AND STEP (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn back (5.3.4 (a) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting forward seal (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back seal (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer seal (6.2.2 (d) (i)) | 1 |
| Nearside Leaf spring fractured at front surrounding bush |2.4.B.1a| | 1 |
| Suspension arm synthetic bush deteriorated resulting in excessive movement NSF and OSF rear bushes |2.4.G.2| | 1 |
| Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt NSF and OSF |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch area corroded |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/wheel arch |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill |5.3.6 |a| |i|| | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 areas |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush Most rear |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill and step areas |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill areas |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill areas |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch areas |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch areas |2.4.A.3| | 1 |
| Rear Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Air/vacuum reservoir leaking |3.6.A.1| | 1 |
| Nearside Rear Inner Floor excessively deteriorated wheel arch |6.2.4 |a| |i|| | 1 |
| Offside Rear Inner Floor excessively deteriorated wheel arch |6.2.4 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/door step |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/door step |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear leaf spring mount corroded |6.1.1 |c| |i|| | 1 |
| Offside Front Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner |marked| |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill |2 places| |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSR SILL CORRODED |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Front leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Back panel within leaf spring mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded step inner edge |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Back panel within leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Back panel within leaf spring mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded step inner edge |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch within engine mounting |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner and outer rear sills within the |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner and outer rear sills within the |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sills / step within the |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sills / step within the |5.2.6| | 1 |
| Nearside Front Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Offside Rear Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger corroded and holed |2.4.A.3| | 1 |
| Nearside Front brake disc contaminated by oil bad engine oil leak contaminating brakes and pas belt |3.5.1h| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis to lower Bulk Head |6.1.B.2| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp with indicater |1.1.A.3f| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush / rearmost |2.4.G.2| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside front inner upper wheel arches |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and near side rear multiple areas around springs as chalked |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded and nearside rear chassiss rails on outsides |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near leaf spring hanger |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear most bush |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow |6.1.B.2| | 1 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings marked in yellow |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rearmost bush |2.4.G.2| | 1 |
| Brake pipe fouled by moving parts front to rears |3.6.B.2a| | 1 |
| Nearside rear brake recording little or no effort NOT WORKING |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort NOT WORKING |3.7.B.5a| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded cill |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch / floor pan |bump stop| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch / floor pan |bump stop| |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded foot step/ floor pan |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail/leg |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer cill and step |5.2.6| | 1 |
| Nearside Front Front position lamp|s| not working SIDE LIGHT |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp not working BRAKE LIGHT IN OP |1.2.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR SPRING SHACKLE CORROSION NSR |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OFFSIDE REAR SPRING SHACKLE CORROSION |6.1.B.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement BROKE |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush BROKE |2.4.G.2| | 1 |
| Centre Rear brake drum contaminated by oil |3.5.1h| | 1 |
| Offside Front Brake lining|s| insecure |3.5.1g| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension arm cracked |2.4.G.1| | 1 |
| Body insecure and dangerous to other road users tiper floor corroded |6.1.B.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill/side loading door sill |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded quarter panel/sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded springhanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger/jacking point |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor/seat mounting |5.2.6| | 1 |
| Fuel tank insecure tank retaining strap broken |7.2.1| | 1 |
| Nearside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Nearside Outer Front Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear passenger seat belt |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill centre and rear |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded back of cab and floor |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is severely distorted sill |5.2.6| | 1 |
| Nearside Body component corroded and likely to cause injury Body step (6.2.1 (a) (i)) | 1 |
| Offside Body component corroded and likely to cause injury Body step (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / strut tower (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill / step (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill / step (6.1.1 (c) (i)) | 1 |
| Nearside Rear Axle beam distorted |2.5.A.5b| | 1 |
| Offside Rear Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Body component damaged and likely to cause injury mirror case (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded Load sense valve |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing edges |6.1.C.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill at the front were mudflap bracket was secured |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing behind road wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near brake load valve |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Above axle |6.1.B.2| | 1 |
| Vehicle Identification Number not legible in drivers window |0.2 |b|| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid n s rear drum |1.1.16 |b| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill on step |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength near front leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nsf and osf inner and outer sills
nsf step rotten front and rear section
osr arch rear section
osr arch front section
both front inner wheel arches (5.3.6 (a) (i)) | 1 |
| Shock absorbers has a serious fluid leak osr (5.3.2 (b)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s front inner wheel arch corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s front body above chassis corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s outer and inner sills corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s and o/s inner and outer sills corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s front inner wing corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s and o/s rear inner wing to floor corroded |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s rear chassis outrigger corroded |6.2.2 |d| |i|| | 1 |
| Brake fluid contaminated o/s rear brake backing plate has brake fluid leak |1.8 |a|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step |6.1.B.2| | 1 |
| Central Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement both |2.4.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner floor |6.1.B.2| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 1 |
| Rear Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury corroded and holed |6.2.8 |a| |ii|| | 1 |
| Nearside Floor excessively deteriorated central door step / floor corroded / insecure / holed |6.2.4 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated inner arch to floor area corroded / separated |6.2.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded / holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated inner arch / floor corroded and holed |6.2.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing corroded / holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill / step area corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing rusted and holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch rusted and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rusted and holed (5.3.6 (a) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired All 3 Cross Members |6.2.2 |d| |ii|| | 1 |
| Nearside Front Floor excessively deteriorated Sill |6.2.4 |a| |i|| | 1 |
| Offside Front Floor excessively deteriorated Sill |6.2.4 |a| |i|| | 1 |
| Brake performance not tested Due To Vehicle Corrosion |1.2.1 |g|| | 1 |
| Offside Front All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Headlamp not working on dipped beam Both |4.1.1 |a| |ii|| | 1 |
| Position lamp likely to become detached N/S rear light cluster (4.2.1 (c) (ii)) | 1 |
| Rear Drive shaft which forms part of the suspension support bearing excessively worn prop bearing |2.4.G.4d| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded on rack |2.3.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill in several places |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis support |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis support |2.4.A.3| | 1 |
| Nearside Front Front suspension retaining device ineffective nut on ball joiny |2.5.A.4| | 1 |
| Nearside Front Outer Vehicle structure has a fracture which adversely affects braking or steering chassis were the spot welded panal is |6.1.A.1| | 1 |
| Offside Inner Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Outer Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at rear inner sill marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at rear chassis leg inner face marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at rear panel by spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at rear panel by spring hanger |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at door step under vehicle |2.4.A.3| | 1 |
| Front Fuel tank insecure tank strap broke |7.2.1| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body panel |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings valance/ slam panel |6.1.B.2| | 1 |
| Position lamp adversely affected by the operation of another lamp both sides rear |4.2.3 |c|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and footstep |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring fractured eyes broken |5.3.1 |b| |i|| | 1 |
| Brake valve inadequately mounted brake load valve seized |1.1.7 |c|| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure rearward mounting |2.4.G.1| | 1 |
| Offside Front Suspension arm attachment bracket/mounting insecure rearward bush |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch / floorpan |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Door step |2.4.A.3| | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn d shaped bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerand outer wheel arches |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill full length |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring shackle support mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner bumper |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body, under drivers step into vehicle |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underbody, around seat bolts |6.1.B.2| | 1 |
| Nearside Rear Passengers seat insecure rear row. (6.2.6 (a) (ii)) | 1 |
| Power steering component leaking rack. (2.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Arch (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Central Sill Side (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Central Sill Side (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Side (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Side (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel near spring |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill and door step |6.1.B.2| | 1 |
| Power steering component|s| leaking pipes to rack |2.3.3b| | 1 |
| Power steering component insecure tank |2.1.5 |d| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis. Next to gearbox mount. |2.4.A.3| | 1 |
| Central Rear Suspension spring mounting prescribed area is excessively corroded Inner sill. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis. Front mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis. Rear mounting. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis.Rear mounting. |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Strut mounting. |2.4.A.3| | 1 |
| Nearside Front Suspension arm damaged and seriously weakened rear bush (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension arm damaged and seriously weakened rear bush (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chasis leg |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced inner wind (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner wheel arch (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced cross member (6.1.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure is fractured and structural rigidity is significantly reduced cross m ember (6.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced outer sill (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis engine compartment (5.3.6 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S OUTER SILL |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S UNDER SILL |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S UNDER SILL |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S REAR OUTRIGGER NEAR FRONT OF SPRING |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/R OUTRIGGER NEAR REAR OF SPRING |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH CHASSIS CORRODED NEAR FRONTS OF SPRINGS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/F UPPER INNER WING |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis, within 30 cm of engine mounting |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember. within 30 cm of front spring mounting |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under bonnet by offside engine mount |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear spring hanger area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front spring mount area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Rear spring mount area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner cill by filler pipe and step |6.1.B.2| | 1 |
| Centre Rear Brake load sensing valve defective and function impaired |3.6.E.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near bulkhead |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded ineer arch |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis near load sensing valve |3.3.A.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded passengers footwell |5.2.6| | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture bulkhead behind fuel filter (1.1.11 (a)) | 1 |
| Offside Front Sub-frame corroded and seriously weakened crossmember (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength numerous areas chalked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near shock absorber mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength underarch 2 areas (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded near door seal |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded numerous areas chalked near spring hangers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded numerous areas chalked near spring hangers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured near spring mounting |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor pan |6.1.B.2| | 1 |
| Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp bad earth all light flashing |1.4.A.2h| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis top, sides and bottom |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis box section by leaf spring mounting |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear and front section of sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded seat mount and seat belt |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis between leaf spring mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis between leaf spring mounts |2.4.A.3| | 1 |
| Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Drag link end ball joint has excessive play Rack end |2.2.B.1f| | 1 |
| Offside Front Drag link end ball joint has excessive play Rack end |2.2.B.1f| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both rear spring hangers |6.1.B.2| | 1 |
| Front Exhaust has a major leak of exhaust gases mid to mid box |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases exhaust has part of the system badly deteriorated |7.1.2| | 1 |
| Fuel system component leaking feul filter top housing area |7.2.3| | 1 |
| Centre seat belt load limiter missing where fitted as original equipment |5.4.3a| | 1 |
| Nearside Front Inner Suspension rod ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel arch on sill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings before wheel arch on sill |6.1.B.2| | 1 |
| Direction indicators flashing more than 120 times a minute Wether ignition on or off |1.4.A.2g| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Engine cradle severly corroded |6.1.B.2| | 1 |
| Offside Rear Direction indicator incorrect colour some lens missing |1.4.A.2f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring shackle area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring anchor area |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step area |5.2.6| | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings seal damaged/cracked |6.1.B.2| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings rear chasis cracked |6.1.B.2| | 1 |
| Hazard warning switch faulty hazards inop |1.4.B.1d| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner wing area shocker top |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded out rigger area rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger area |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill inner and outer |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded inner wing, near strut top |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering wheel arch |6.1.A.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by rear of leaf spring |6.2.2 |d| |i|| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp bad earth flashing |1.1.A.3f| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILLS HOLED |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILLS HOLED |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS BOX SECTION HOLED |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH INNER WHEEL ARCHES HOLED AND CORRODED EXCESIVE |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSS MEMBER HOLED AND CORRODED |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH STEPS HOLED |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint GAITER SPLIT TOO |2.4.G.2| | 1 |
| Nearside Front Drag link end ball joint has excessive play TIE ROD |2.2.B.1f| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush LOWER ARM REAR BUSH |2.4.G.2| | 1 |
| Offside Rear rear brake recording little or no effort HAND BRAKE |3.7.B.5a| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cross member |6.1.B.2| | 1 |
| Exhaust system not adequately supported Front and rear |7.1.1| | 1 |
| Offside front brake binding Bad |3.7.B.1| | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
| Nearside Stop lamp|s| light intensity significantly reduced Adversely affected by direction indicator |4.3.3 |a| |ii|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor/sill rear of door bottom |6.1.B.2| | 1 |
| Rear Brake pipe inadequately supported pipes to flexy |3.6.B.1| | 1 |
| Rear Vehicle structure has damage which adversely affects braking or steering cross member |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing under bonnet |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing under bonnet |6.1.B.2| | 1 |
| Nearside Front Brake hose inappropriately repaired insecure |3.6.A.3| | 1 |
| Fuel tank insecure fuel tank strap |7.2.1| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering near coil spring |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has a fracture which adversely affects braking or steering holed and corroded |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering holed and corroded |6.1.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded holed and corroded inner door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded holed and coroded near inner door step |5.2.6| | 1 |
| Centre Rear Brake actuating linkage mounting prescribed area is excessively corroded rear cross member holed and corroded |3.3.A.2| | 1 |
| Nearside Rear Leaf spring cracked front spring mounting |2.4.B.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill under door |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear hanger |6.1.B.2| | 1 |
| Offside Front Floor excessively deteriorated step corroded |6.2.4 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Engine mounting bracket damaged or deteriorated resulting in excessive movement MOUNTING CROSSMEMBER EXCESSIVE CORROSION (6.1.8 (a) (i)) | 1 |
| Nearside Other passenger door cannot be opened from outside the vehicle side loading door |6.2.3 |a|| | 1 |
| Nearside Rear Brake pivot has restricted free movement |3.5.1k| | 1 |
| Anti-roll bar has excessive play in a pin/bush o/s rear anti roll bar link nut loose n/s nut missing |2.4.G.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear crossmember at handbrake cable mounts holed |3.1.9| | 1 |
| Nearside Rear Anti-roll bar linkage insecure not attached |2.4.G.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed behind road wheels |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis lower part and behind road wheel |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills holed |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sills holed |5.2.6| | 1 |
| Nearside Rear Rear reflector reflecting white to the rear |4.8.2 |a| |ii|| | 1 |
| Offside Front Position lamp not working side lamp out |4.2.1 |a|| | 1 |
| Nearside Front Outer Integral body structure is deformed and structural rigidity is significantly reduced sill |6.1.1 |a| |i|| | 1 |
| Offside Integral body structure is fractured and structural rigidity is significantly reduced door step |6.1.1 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail loose |5.3.3 |b| |ii|| | 1 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail loose |5.3.3 |b| |ii|| | 1 |
| Offside Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Front Ball joint has excessive play both front tracker rod end |2.2.B.1f| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 9 large and small welding patches combined |6.1.B.2| | 1 |
| Offside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill / step area |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg as marked. |6.1.B.2| | 1 |
| Front Windscreen in an unacceptable condition Crack in "zone A" over 10mm. |3.2 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced As marked. |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper chassis.as marked |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded and leaking at ferrule.as marked |2.3.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded drivers door step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded passenger door step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded lower sill to door step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded lower sill at door step |2.4.A.3| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member corroded |6.1.B.2| | 1 |
| Fuel tank insecure Front Tank Strap corroded away |7.2.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSF inner wing |6.1.B.2| | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings OSF outrigger cracked |6.1.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp with offside indicator |1.1.A.3f| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at both rear arches |6.2.2 |d| |i|| | 1 |
| Brake performance not tested brake pipe burst |3.7.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor in cab (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under bonnet chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner chassis (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength to front of rear leaf spring, within wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength to front of rear leaf spring, within wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vehicle structure within 30 cm of leaf spring rear spring eye (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vehicle structure, within 30 cm of leaf spring rear spring eye (5.3.6 (a) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system under bonnet (1.1.11 (b) (ii)) | 1 |
| Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has an inadequate repair which adversely affects braking or steering sil |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Rear Body panel damaged and likely to cause injury DOOR |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill near chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting / chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting / chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring front mounting point / chassis |2.4.A.3| | 1 |
| Nearside Outer Front Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill areas |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger x2 places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger x2 places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded wheelarch/wing areas |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheelarch/wing areas |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch /wing |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch /wing |2.4.A.3| | 1 |
| Rear Stop lamp not working both wiring fault |1.2.1b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both rear sills holed inside and outside sills |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch and chassis leg |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to body |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis near fuel tank |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill ..door step and outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded most rear chassis next to spring hanger |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie leg |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger..... (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger....... (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush....... (5.3.4 (a) (i)) | 1 |
| Body has a sharp edge caused by corrosion nearside rear wheel arch |6.1.C.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside rear out rigger |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings offside rear inner |6.1.B.2| | 1 |
| Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings nearside rear inner |6.1.B.2| | 1 |
| Offside Front Track rod end ball joint has excessive play also the boot is split (2.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around the rear spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance dim light |1.1.A.3d| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step & sill backing corroded |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills |6.1.1 |c| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill areas |5.2.6| | 1 |
| Offside Outline marker lamp not working side markers x2 |4.2.1 |a|| | 1 |
| Nearside Body panel corroded and likely to cause injury rear body hinge |6.2.1 |a| |i|| | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Central Prop shaft bearing excessively worn Both prop center bearings (6.1.7 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger by spring mounting |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill [front to rear] |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill [front to rear] |2.4.A.3| | 1 |
| Sub-frame corroded and seriously weakened engine mounting subframe (5.3.3 (b) (i)) | 1 |
| Nearside front brakes release unevenly Slow to release |3.7.B.4| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Outline marker lamp not working |4.2.1 |a| |ii|| | 1 |
| Offside Rear Outer Outline marker lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Outer Tailgate pillar insecure |6.2.1 |b| |i|| | 1 |
| Offside Rear Tailgate pillar insecure |6.2.1 |b| |i|| | 1 |
| Offside Front Outer Anti-roll bar fractured anti roll bar split/cracked at end around bush |5.3.3 |b| |ii|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced cracked behind cab |6.1.1 |a| |i|| | 1 |
| Central Rear Prop shaft bearing excessively worn 2nd centre bearing worn out |6.1.7 |b| |i|| | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle door wont open from outside |6.2.3 |a|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch x3 (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch x3 (6.1.1 (c) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury Wing and Wheel Arch corroded and holed |6.2.1 |a| |i|| | 1 |
| Horn sound not in accordance with requirements Harsh sounding |7.7 |c|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion butt step |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch chassis |2.4.A.3| | 1 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded nearside and offside |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured suspension turret |2.4.A.3| | 1 |
| Nearside Front Suspension component attachment bracket/mounting insecure and impairing directional stability hub bolt missing |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement `D` BUSH |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement `D` BUSH |2.4.G.2| | 1 |
| Centre Rear Statutory seat belt missing buckle |5.1.1| | 1 |
| Rear Suspension weakened allowing body or other component to foul a road wheel or would do so if laden |2.4.A.1b| | 1 |
| Exhaust has a major leak of exhaust gases front turbo joint |7.1.2| | 1 |
| Nearside Rear Lower Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross Member (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Steering linkage ball joint has excessive play Drum Stick (2.1.3 (b) (i)) | 1 |
| Seat belt insecurely fixed to the vehicles structure all rear |5.2.1a| | 1 |
| Rear Statutory seat belt missing staulks |5.1.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember x2 |2.4.A.3| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to door post |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to sill |6.1.B.2| | 1 |
| Nearside Rear passenger door hinge insecure both hinges |6.2.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6| | 1 |
| Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides |6.1.1 |c| |i|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member and chassis legs |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wings |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis top |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both front chassis legs |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine emmissions not tested |7.4.B.3b| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under arch (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting under arch (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting drivers step (6.2.2 (d) (i)) | 1 |
| Offside Front Body panel insecure (6.2.1 (a) (i)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both o/s and n/s |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both o/s and n/s |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
| Body has a sharp edge caused by corrosion full rear cross member |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion cross member |6.1.C.1| | 1 |
| Offside Front Front wheel bearing has excessive play excessive play |2.5.A.3c| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion cill hole |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting arch/floor seam |2.4.A.3| | 1 |
| Nearside Rear Body has a projection caused by damage arch trim hanging off/sticking out |6.1.C.1| | 1 |
| Front Power steering component|s| inappropriately repaired reservoir bottle insecure |2.3.7| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded underbody sill |5.2.6| | 1 |
| Power steering component|s| leaking rack/pipes |2.3.3b| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body sill |6.1.B.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases in two places |7.1.2| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassic leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassic leg |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion Side panels |6.1.C.1| | 1 |
| Bonnet cannot be secured in the closed position All fixings missing |8.4.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both chassis cross-members |6.1.B.2| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement Both |2.4.G.2| | 1 |
| Centre Rear Lower Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Strut turret & inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Crossmember x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Crossmember x2 |2.4.A.3| | 1 |
| Front Headlamp not working on dipped beam both side (4.1.1 (a) (ii)) | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner & outer sills corroded |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded inner & outer sills |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded inner sill & step box |2.4.A.3| | 1 |
| Offside Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to inner wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Fuel tank insecure rear tank strap corroded (6.1.3 (a) (i)) | 1 |
| Nearside Front Inner Body panel corroded and likely to cause injury wheel arch to sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Fuel tank insecure fuel tank strap (6.1.3 (a) (i)) | 1 |
| Brake pipe excessively damaged front rear |3.6.B.2c| | 1 |
| Nearside Body has a sharp edge caused by corrosion full outer sill |6.1.C.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top mounting area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner wing |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at rear spring hanger |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring hanger |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring support |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering at spring support |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor seat mount |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mid inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mid outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded mid inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded mid outer sill |2.4.A.3| | 1 |
| Offside Rear Body component damaged and likely to cause injury light (6.2.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced spring hanger (6.1.1 (c) (i)) | 1 |
| Front Oil leaking continuously from engine posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
| Offside Front Brake lining|s| less than 1.5 mm thick marked yellow |1.1.13 |a| |ii|| | 1 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced sharp edges |1.7.5a| | 1 |
| Front Front wheel bearing rough when rotated offside and nearside |2.5.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member. (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet. (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected under arch. (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch to floor. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring hanger |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill / step |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in 2 areas |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in 2 areas |6.1.B.2| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill in 2 areas |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch at the top |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch at the top |2.4.A.3| | 1 |
| Nearside Front front brakes release unevenly binding once once applied |3.7.B.4| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under body edge in corner |2.4.A.3| | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch and panel |6.2.1 |a| |i|| | 1 |
| Bonnet retaining device ineffective bonnet can not be opened |8.4.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner foot well |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring mount |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sills and step areas |7.1.1 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill areas |7.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Brake prescribed area is excessively corroded chassis, directly behind road wheel |1.1.21 |e| |i|| | 1 |
| Brake valve inadequately mounted incorrectly set. |1.1.7 |c|| | 1 |
| Exhaust has a major leak of exhaust gases 2nd silencer from front, holed |6.1.2 |a|| | 1 |
| Prop shaft flexible coupling excessively deteriorated 2nd bush from front |6.1.7 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill repairs inadequate welding |7.1.1 |a| |i|| | 1 |
| Service brake effort inadequate at a wheel both rears low,
n/s 130kg
o/s 160kg |1.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills several places (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills several places (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced doorstep (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outrigger to spring mounting area several places (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger to spring mounting several places (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering innerwing (6.1.1 (c) (ii)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember several places (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill areas (7.1.1 (a) (i)) | 1 |
| Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| rack |2.2.A.1b| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis both sides around shackle mtngs |2.4.A.3| | 1 |
| Power steering component|s| leaking around pinion |2.3.3b| | 1 |
| Power steering component|s| leaking at pinion |2.3.3b| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush rear mtng |2.4.G.2| | 1 |
| Emissions not tested thick black smoke (8.2.2.2 (e)) | 1 |
| Front Bumper insecure nearside |6.1.4 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and o/s/f under door as marked |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill at four places as marked |6.1.B.2| | 1 |
| Nearside Rear Shock absorber missing and n/s/r damping rubber under leaf spring centre |2.7.1b| | 1 |
| Nearside Rear Body has a projection caused by damage wing arch as marked |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and n/s/r as marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 places as mark |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 3 places as mark |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by leef spring as mark |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch. |6.1.B.2| | 1 |
| Front position lamp|s| incorrect colour Blue lights showing on front |1.1.A.3e| | 1 |
| Radius arm rubber bush bonding deteriorated resulting in excessive movement n/s front wishbone rear bush |2.4.G.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering o/s front inner wing |6.1.A.1| | 1 |
| Body has a sharp edge caused by corrosion Both front inner wings |6.1.C.1| | 1 |
| Body has excessive displacement which may lead to loss of vehicle control front o/s inner wing support |6.1.B.1a| | 1 |
| Nearside Rear Electrical wiring deteriorated, likely to become detached |1.9.2b| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wings |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drvers step inner cil |6.1.B.2| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rails |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded front floor |5.2.6| | 1 |
| Bonnet retaining device ineffective unable to open
|8.4.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch x 2 |2.4.A.3| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Position lamp not working all side markers (4.2.1 (a) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired inner arch to step (6.2.2 (d) (ii)) | 1 |
| Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired understep (6.2.2 (d) (ii)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired inner arch several places (6.2.2 (d) (ii)) | 1 |
| Front Engine mounting fractured mount cradle corroded (6.1.8 (a) (ii)) | 1 |
| Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear crossmember both sides |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both sides inner sills |5.2.6| | 1 |
| Centre Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Outer Seat belt cut causing the fibres to separate |5.1.B.3a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all areas within prescribed distance of all rear spring mountings |6.1.B.2| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure |6.1.7 |g| |ii|| | 1 |
| Nearside Headlamp cleaning device inoperative |1.7.2| | 1 |
| Offside Headlamp cleaning device inoperative |1.7.2| | 1 |
| Front Anti-roll bar pin or bush excessively worn anti roll bar d bushes (5.3.4 (a) (i)) | 1 |
| Drive shaft damaged |2.4.G.6a| | 1 |
| Offside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill panel (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded behind seat (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded behind seat (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced passinger sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cms of seat mounting (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced chassis leg in wheel arch (6.1.1 (d) (i)) | 1 |
| Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced three cross members across body corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Body component insecure mud guard loose catching wheel (6.2.1 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both door steps inside sill |6.1.B.2| | 1 |
| Front Body has a projection caused by damage Bumper |6.1.C.1| | 1 |
| Bonnet retaining device ineffective Unable to check items under bonnet |8.4.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill and inner sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill and inner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor corroded |6.1.B.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both links |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure D bush missing and bracket loose |2.4.G.1| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement Both D bushes |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch various |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch various |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill. |5.2.6| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom ball joint. |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner/outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis / in front of rear wheel |2.4.A.3| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis / behind o/s/f wheel |2.4.A.3| | 1 |
| Fuel tank insecure DUE TO BROKEN TANK STRAP |7.2.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis members |2.4.A.3| | 1 |
| Centre Exhaust has a major leak of exhaust gases section of |7.1.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting area |5.2.6| | 1 |
| Body has a projection caused by corrosion both front wing have sharp edges |6.1.C.1| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush inner rear suspention arm bush worn |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush inner rear suspention arm bush worn |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing corroderd |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing corroderd |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing corroderd |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded inner wing corroderd |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner lower back panel corroderd |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded lower quarter panel corroderd |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded lower quarter panel corroderd |2.4.A.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassi corroderd |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassi leg corroderd |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill corroderd |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill corroderd |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill corroderd |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded door step corroderd |2.4.A.3| | 1 |
| Offside Leaf spring splayed and fouling |2.4.B.1c| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded FRONT STEP |2.4.A.3| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CROSSMEMBER |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired FRONT OF SPRING |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired REAR OF SPRING ON TO CHASSIS |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded shackle mounting area |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded driver`s seat base |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside front inner archs |2.4.A.3| | 1 |
| Suspension arm has excessive play in a pin/bush nearside and offside front wishbone |2.4.G.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing to shock mount |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x menber |2.4.A.3| | 1 |
| Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside & nearside sills |6.1.B.2| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Offside & nearside close to rear suspension hangers |6.1.B.2| | 1 |
| Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside & nearside inner wings |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside & nearside chassis rail |6.1.B.2| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp earth fault |1.1.A.3f| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg to floor |2.4.A.3| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring hanger |6.1.B.2| | 1 |
| Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings ladder sections |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Front position lamp|s| incorrect colour both |1.1.A.3e| | 1 |
| Offside Front drive shaft bent |2.5.C.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis and outer rigger in three places |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting near side rear and off side rear in 3 places |6.6.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outer rigger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer rigger |5.2.6| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion by rear light |6.1.C.1| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Rear rear brake recording little or no effort handbrake |3.7.B.5a| | 1 |
| Rear rear brake recording little or no effort foot brake |3.7.B.5a| | 1 |
| Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch to floor |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill weld in complete |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill weld incoplete |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by spring mount holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded compensator valve |3.3.A.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outer hole in prescribed area |6.1.B.2| | 1 |
| Centre Rear Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Offside Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected |steering rack fitted| |2.3 |a| |ii|| | 1 |
| Nearside Front Brake pipe inadequately clipped along chassis |3.6.B.1| | 1 |
| Front Brake pipe inadequately clipped across bulk head |3.6.B.1| | 1 |
| Stop lamp not working nearside and offside |1.2.1b| | 1 |
| Nearside Front Body has a projection caused by damage BUMPER LOOSE |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength 2 places (5.3.6 (a) (i)) | 1 |
| Brake valve leaking balance valve (1.1.7 (d) (i)) | 1 |
| Upper Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front Wheel bolt|s| loose |4.2.A.1e| | 1 |
| Front position lamp|s| not working both front |1.1.A.3b| | 1 |
| Driver`s seat insecure bolts missing |6.2.A.1| | 1 |
| Nearside Rear Lower Brake valve leaking |3.6.A.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel behind offside front wheel (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panels behind nearside and offside rear wheels (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside sills (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside inner sills (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside inner step (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/leaf spring bracket |2.4.A.3| | 1 |
| All position lamps not working Interior lights inop |1.1.A.3b| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear arch |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under radiator bracket (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced below inner wings (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced below inner wings front and rear (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill by front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Sill by rear mounting |2.4.A.3| | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative compensator valve |1.1.17 |c| |ii|| | 1 |
| Rear Towbar attachment defective fixing bolts loose missing |6.1.6 |c| |i|| | 1 |
| Body insecure bed plates insecure reauires fixing down |6.2.2 |a| |i|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded below passenger seat |5.2.6| | 1 |
| Fuel pipe leaking at injector |7.2.3| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Welding x7!! |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s front inner sills to step area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to chassis corroded |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded next to load sensor valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill in front off wheel arch corroded |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top of chassis visible under bonnet |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by damage head lamp |6.1.C.1| | 1 |
| Stop lamp not working offside/nearside |1.2.1b| | 1 |
| Subframe mounting prescribed area is excessively corroded O/S Step |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis and Floor Area |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Upper Strut Mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Upper Strut Mount |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear sills |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded off side rear out rigger |2.4.A.3| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both outer sills and o/s under sill |6.1.1 |c| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both under wing inner wings |6.1.1 |c| |i|| | 1 |
| Nearside Rear Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion under sill |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering main chasis |6.1.A.1| | 1 |
| Front Headlamp excessively deteriorated so that the light output is severely reduced both |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded upper shocker mount |2.4.A.3| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced Both |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Top shocker mount |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front & rear |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Front Headlamp not working on dipped beam both |1.7.5a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front near suspension top mountain corroded |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front near suspension top mountain corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired near suspension mountain |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired near suspension mountain |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded hole in the inner sill near a suspension mountain |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings front spring mount |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush rear |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush front |2.4.G.2| | 1 |
| Rear position lamp|s| incorrect colour lens smashed showing white light to the rear |1.1.A.3e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring mounting mount |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear valance |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting outrigger front mounting bush x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded valance spring mounting location |2.4.A.3| | 1 |
| Offside Rear Stop lamp not working stop lamp |1.2.1b| | 1 |
| Nearside Outer Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Nearside Seat belt not functioning as intended centre (7.1.2 (c)) | 1 |
| Nearside Front Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
| Nearside front parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Anti-roll bar has excessive play in a pin/bush Both rear D bushes |2.4.G.2| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure rear bolt |2.4.G.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted front |2.4.A.3| | 1 |
| Nearside Rear Lower Tie bar/rod locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch front to rear |6.1.B.2| | 1 |
| Offside Rear passenger door catch insecure |6.2.B.2| | 1 |
| Offside Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached chalked yellow |6.1.6 |i| |ii|| | 1 |
| Front Exhaust system insecure chalked yellow |6.1.2 |a|| | 1 |
| Prop shaft bearing excessively worn chalked yellow (6.1.7 (b) (i)) | 1 |
| Exhaust system insecure tail pipe corroded and hangar snapped off (6.1.2 (a)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings mid chassis at fuel tank area |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion n/s side load door |6.1.C.1| | 1 |
| Central Exhaust has a major leak of exhaust gases both silencers |7.1.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above bump stop on outer side (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above front and rear spring hangers |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above front and rear spring hangers |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step panel |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front to rear |6.1.B.2| | 1 |
| Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement bottom arm rear bush split |2.4.G.2| | 1 |
| Front Lower engine mounting deteriorated resulting in excessive movement gear box mount |6.1.D.1a| | 1 |
| Offside Front Braking system leaking brake pipe/flexy |3.6.A.1| | 1 |
| Rear Brake cable damaged cable broken |1.1.15 |a|| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |1.1.13 |a| |ii|| | 1 |
| Centre Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Front wheel bearing rough when rotated both front |2.5.A.2| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis behind body |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded r step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded r step |5.2.6| | 1 |
| Central Rear Seat belt locking mechanism does not secure or release bickle not present |5.2.5a| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s floor to sill full length.
o/s rear wheel inner wheel arch |6.1.B.2| | 1 |
| Offside Inner Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Central Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
| Offside Front Direction indicator has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing 30 cm from sub frame attachment. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill corroded 30 cm from spring mount. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill corroded 30 cm from spring mount. |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded 30 cm from belt mount. |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Lower swivel |2.4.G.2| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush o/s & n/s |2.4.G.2| | 1 |
| Rear Anti-roll bar insecure Drop links loose |2.4.G.1| | 1 |
| Nearside Front Front suspension locking device missing driveshaft missing split pin |2.5.A.4| | 1 |
| Steering component is not secure to the vehicle structure reservoir |2.2.B.1a| | 1 |
| Rear Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced RUSTED (6.1.1 (b) (ii)) | 1 |
| Nearside Upper Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Nearside Front Inner Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre outer sill various places |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre inner sill various places |6.2.2 |d| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outrigger |6.1.B.2| | 1 |
| Fuel system component leaking on top of engine |7.2.3| | 1 |
| Power steering pipe|s| or hose|s| leaking behind front bumper |2.3.3b| | 1 |
| Offside Front Upper Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis bump stop /shocker area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded bump stop /shocker area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Outer Seat belt anchorage prescribed area is excessively corroded both sills |5.2.6| | 1 |
| Brake performance not tested due to condition |1.2.1 |g|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded back of step |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded backing sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear quarter behind bumper |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember before axle |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember over axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by compensator |2.4.A.3| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch to chassis area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch to chassis area (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced mount in cab (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inside cab (7.1.1 (a) (i)) | 1 |
| Bonnet primary retaining device ineffective latch / lock fault (3.1 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near top mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near front leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hold |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 1 |
| Position lamp adversely affected by the operation of another lamp both rear lights flashing when indicators on |4.2.3 |c|| | 1 |
| Rear fog lamp adversely affected by the operation of another lamp n/s rear fog light flashing when indicators on |4.5.4 |b|| | 1 |
| Direction indicator not working both rear indicators n/w |4.4.1 |a| |ii|| | 1 |
| Stop lamp|s| light intensity significantly reduced both rear brake lights dim and flashing when indicators on |4.3.3 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near step |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind whell (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OFFSIDE FRONT CHASSIS LEG |6.1.1 |c| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OFFSIDE AND NEARSIDE FRONT TO REAR INNER AND OUTER SILLS |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OFFSIDE FRONT INNER WING |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR INNER WHEEL ARCHES |5.3.6 |a| |i|| | 1 |
| Wheel bearing has excessive play NEARSIDE FRONT |5.1.3 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail in inner wing /wheel area (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring main leaf fractured anchor eye (5.3.1 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill jacking point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded from chassis to inner wheel arch and body panel |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both door steps |5.2.6| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` "memphis" sun strip .. |8.3.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail behind wheel |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail in engine bay |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER and OUTER chassis rail above axle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER and OUTER chassis rail above axle |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central inner sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded load valve mounting |1.1.21 |e| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear front spring hanger mount (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear front spring hanger mount (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear spring rear hanger mount ( 3 places ) (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear spring rear hanger mount (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wheelarch corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected and nearside rear spring hanger mounting front and back (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected and offside front inner wheel arches (5.3.6 (a) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and offside inner and outer sills (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and offside rear inner wheel arches (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and offside under foot steps (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by subframe mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by subframe mount x2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by leaf spring mount |5.3.6 |a| |i|| | 1 |
| Brake prescribed area is excessively corroded chassis rail by load sensing valve |1.1.21 |e| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger by leaf spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf sprng front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear shocker mounting |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by damage door morror |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by damage door mirror backing missing |6.1.C.1| | 1 |
| Towbar attachment insecure Bolts loose , movement of towbar |6.1.6 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing , behind strut , marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush D bushes |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush D bushes |2.4.G.2| | 1 |
| Offside Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill |6.2.2 |d| |ii|| | 1 |
| Nearside Outer Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill |6.2.2 |d| |ii|| | 1 |
| Nearside Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired sill |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired spring hanger |6.2.2 |d| |ii|| | 1 |
| Front Fuel tank insecure tank strap broken |6.1.3 |a| |i|| | 1 |
| Rear Fuel tank insecure tank strap broken |6.1.3 |a| |i|| | 1 |
| Emissions not tested low oil |8.2.2.2 |e|| | 1 |
| Brake performance not tested exsesive corrosion |1.2.1 |g|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner+outer sill |5.2.6| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush , marked |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Under drivers step , marked |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Passenger step / inner sill , marked |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner / outer sill by spring eye , marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to rear of wheel arch / spring shackle , marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of spring |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind spring |6.1.B.2| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner face of chassis |2.2.C.1h| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer face of chassis |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer face of chassis |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL IN 2 PLACES |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL IN 2 PLACES |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CHASSIS |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear chassis x2 |2.4.A.3| | 1 |
| passenger door catch insecure rear doors |6.2.B.2| | 1 |
| Offside Body has a sharp edge caused by damage mirror casing broke |6.1.C.1| | 1 |
| Exhaust system not adequately supported rear rubber mount broke |7.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and rear chassis |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded 3 places |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded 2 places |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near lef spring at the back marked up |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings all across rear crossmember |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above spring |6.1.B.2| | 1 |
| Nearside Inner Rear Leaf spring to axle securing nut missing |2.4.B.7b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor inner sill |2.4.A.3| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement left open key missing |7.2.4b| | 1 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure rear most seat mounting point |5.2.1a| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step to sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step to sill and outer sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Fuel tank insecure Fuel tank holding straps corroded (6.1.3 (a) (i)) | 1 |
| Central Front Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement both sides rear |2.4.B.2| | 1 |
| Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement all rear |2.4.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement arm rear bush |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outrigger at front of wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger at the rear of the wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger at the rear of the wheel |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor / inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion corner near light unit |6.1.C.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner & outer |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill |6.1.B.2| | 1 |
| Position lamp adversely affected by the operation of another lamp indicator (4.2.3 (c)) | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp indicator (4.3.3 (b)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded welding to all four corners and door steps |2.4.A.3| | 1 |
| Central Front Undertray likely to become detached (6.2.1 (a) (ii)) | 1 |
| Front Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Central Rear Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
| Centre Front Lower Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Road wheel bead rim badly distorted inner |4.2.A.1a| | 1 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement front wishbone |2.4.G.2| | 1 |
| Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement front wishbone |2.4.G.2| | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by bump stop (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor and inner arch area (5.3.6 (a) (i)) | 1 |
| Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer cill pannel is holed front and rear |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer cill pannel is holed front and rear |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at step area |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded cill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded INNER STEP/SILL MARKED |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded INNER STEP/SILL MARKED |5.2.6| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cab wheel arch lower (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering cab wheel arch lower (6.1.1 (c) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wing (6.2.2 (d) (ii)) | 1 |
| Brake load sensing valve linkage defective and function impaired lever siezed (1.1.17 (a)) | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached loose at lower fixing (5.3.3 (a) (i)) | 1 |
| Nearside Outer Rear Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Inner Vehicle structure has damage which adversely affects braking or steering sill next to step |6.1.A.1| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill next to step |6.1.A.1| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill next to step |6.1.A.1| | 1 |
| Nearside Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill and out rigger |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arches |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arches |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x3 |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner & outer sill area |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point both inner cill and outer cill |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point on cill both inner and outer |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner jacking point |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quarter leading into rear bumper fastners |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner quarter leading into rear bumper fastners |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under driver step |6.1.B.2| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded and functionality of the braking system is affected bracket corroded which carries handbrake cables (1.1.21 (e) (ii)) | 1 |
| Nearside Outline marker lamp not working 2 (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working 3 (4.2.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outersill and cab (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outersill and cab (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced undersill to floor (7.1.1 (a) (i)) | 1 |
| Brake load sensing valve seized but ABS functioning rear compensator (1.1.17 (c) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Limit 1.19 (8.2.2.2 (a)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint droplink |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a ball joint droplink |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides outer sills |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre chassis near fuel tank |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded leaf spring shackle mounting |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded leaf spring shackle mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp Sidelight |4.4.3 |b|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded rear of wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis at shackle end of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near spring mount |6.1.B.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp affects other lights |4.4.3 |b|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTER SILLS |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTER SILLS |7.1.1 |a| |i|| | 1 |
| Nearside Rear Leaf spring fractured broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Leaf spring fractured broken |5.3.1 |b| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Rear reflector not fitted symmetrically |1.4.1| | 1 |
| Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outer Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sill |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sill halfway down the vehicle |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sill |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut mounting inside the wheel arch |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp affecting all lights on o/s/r (4.4.3 (b)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg corroded/holed near brake servo and brake pipe and engine mount (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg behind subframe mount (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg behind subframe mount (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front subframe, rear mounting point corroded (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases tailpipe (6.1.2 (a)) | 1 |
| Rear position lamp|s| not working n/s o/s |1.1.A.3b| | 1 |
| Centre Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis above propshaft |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion hole on tipper |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings passenger step |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer step |6.1.B.2| | 1 |
| Offside Rear Rear fog lamp not working Bad earth affecting all lights (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring,front and rear mounts and inner sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring,front and rear mounts and inner sills (5.3.6 (a) (i)) | 1 |
| Rear Brake valve insecurely mounted due to chassis corrosion |3.6.A.2a| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis and flitch areas |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis and flitch areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and floor sections,within 30cm of both hanger mounting areas. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis and floor sections within 30cm of both spring hanger areas |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch and floor area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch and floor areas |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor and sill area |5.2.6| | 1 |
| Nearside Rear Valve stem seriously damaged inner wheel |4.1.D.1e| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion bumper |6.1.C.1| | 1 |
| Nearside Rear Body component damaged and likely to cause injury flat bed corner (6.2.1 (a) (i)) | 1 |
| Nearside Body has a sharp edge caused by damage rear reflector |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by damage rear reflector |6.1.C.1| | 1 |
| Supplementary Restraint System warning lamp indicates a fault brake fluid lamp |5.4.2| | 1 |
| Offside Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Body panel corroded and likely to cause injury body step |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear panel and crossmember x2 |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember and outrigger x2 |6.6.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheelarch/floor |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Front Body insecure and dangerous to other road users bumper corner |6.1.B.1b| | 1 |
| Shock absorber has a serious fluid leak N/S/R |2.7.3| | 1 |
| Track rod end ball joint has excessive play N/S/F |2.2.B.1f| | 1 |
| Power steering component|s| leaking POWER STEERING FEED PIPES LEAKING |2.3.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S AND O/S SILL BACKS |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S OUTER SILL/ DOOR STEP |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S AND O/S FRONT INNER CHASSIS |6.1.B.2| | 1 |
| Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt O/S/F |2.4.G.2| | 1 |
| Braking system leaking O/S/F HOSE/CALIPER |3.6.A.1| | 1 |
| front brake binding O/S/F |3.7.B.1| | 1 |
| front brakes release unevenly O/S/F SLOW |3.7.B.4| | 1 |
| Front passenger door cannot be opened from outside the vehicle N/S/F |6.2.B.1b| | 1 |
| Front passenger door hinge insecure N/S LOWER |6.2.B.2| | 1 |
| Rear fog lamp not working O/S |1.3.2b| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both rear (6.1.1 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill back (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mear load sence valve (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3| | 1 |
| Nearside Front Track rod end ball pin shank loose excess play |2.2.B.1c| | 1 |
| Nearside Front Lower Statutory seat belt missing |5.1.1| | 1 |
| Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Full sill (6.2.2 (d) (i)) | 1 |
| Nearside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Full sill (6.2.2 (d) (i)) | 1 |
| Nearside Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Floor and wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Full sill (6.2.2 (d) (i)) | 1 |
| Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill (6.2.2 (d) (i)) | 1 |
| Offside Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Floor and wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Crossmember (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Crossmember (6.2.2 (d) (i)) | 1 |
| Front Brake pipe inadequately clipped Around back of engine |3.6.B.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/sill area and cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/sill area and cross member |2.4.A.3| | 1 |
| Offside Stop lamp emits other than a steady red light light unit damaged |1.2.1e| | 1 |
| passenger door does not latch securely closed both rear doors |6.2.B.1a| | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint prop shaft |2.4.G.4b| | 1 |
| Central Drive shaft which forms part of the suspension support bearing excessively worn prop shaft |2.4.G.4d| | 1 |
| Nearside Front Headlamp aim not in a clean condition affecting light output |1.2.4a| | 1 |
| Nearside Rear All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Nearside Front Brake modification unsafe compression joint fitted (1.1.21 (d) (i)) | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Rear Fuel pipe insecure |6.1.3 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance at |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner panel at |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at |5.3.6 |a| |i|| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp faulty conection |1.2.1f| | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above bump stop (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis above bump stop (5.3.6 (a) (i)) | 1 |
| Central Rear Prop shaft joint excessively worn Last U/J badly worn (6.1.7 (c) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect Lamp not seated correctly & Headlight Glass broken (4.1.2 (c)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Body worked corroded & Holed close to Spring Hanger (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front chassis structure holed inside wheel arch area as marked (6.2.2 (d) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner arch both sides |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced both steps (6.1.1 (a) (i)) | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced both inner and outer sills (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear out rigger (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under servo (6.1.1 (c) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Offside Body panel corroded and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all lights faulty (4.4.3 (b)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both front inner step sills (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength two places |5.3.6 |a| |i|| | 1 |
| Nearside Outer Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Inner Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Outer Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber and spring mount (5.3.6 (a) (i)) | 1 |
| Front Sub-frame fractured |2.4.G.1| | 1 |
| Nearside Front Hazard warning lamps not fitted |1.4.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near brake compensater |2.4.A.3| | 1 |
| Nearside Rear Brake drum significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Rear Brake drum significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front passenger door catch missing (6.2.3 (c) (ii)) | 1 |
| Nearside Rear Inner Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Nearside Body has a sharp edge caused by damage corrosion on inner sill |6.1.C.1| | 1 |
| Body has a sharp edge caused by damage inner sill excessive corrosion |6.1.C.1| | 1 |
| Nearside Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition excessive corrosion on exhaust system |7.1.4| | 1 |
| Offside Suspension arm has excessive play in a pin/bush bush worn |2.4.G.2| | 1 |
| Offside Front Track rod end ball joint has excessive play track rod end |2.2.B.1f| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill area near step |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill marked with yellow chalk (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill marked with yellow chalk (6.2.2 (d) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both outer sills |6.1.1 |c| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner wheel arches |6.1.1 |c| |i|| | 1 |
| Brake pump/compressor drive system defective |3.6.F.1| | 1 |
| Nearside Additional braking device has inadequate clearance between other components |3.6.I.2| | 1 |
| Offside Body component corroded and likely to cause injury drivers step badly corroded (6.2.1 (a) (i)) | 1 |
| Offside Inner Body panel corroded and likely to cause injury inner sill rotten (6.2.1 (a) (i)) | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury outer sill holed and corroded (6.2.1 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury under rear bumper badly corroded (6.2.1 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch x3 |6.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch |6.1.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced box section by spring hanger |6.1.1 |a| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x3 |6.1.1 |c| |i|| | 1 |
| Nearside Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill x2 |6.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch |6.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch, marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near suspension mounts (5.3.6 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` tax disc holder removed |8.3.1b| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near brake bias valve (6.1.1 (c) (i)) | 1 |
| Front Exhaust system insecure exhaust clamp missing (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected BEHIND WHEEL MARKED ALL WELDING TO BE SEAM WELDED (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BEHIND WHEEL MARKED (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn BOTTOM ONE (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2PLACES |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected 2 PLACES ALLWELDING TO BE SEAM WELDED |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected welding to be seam welded |5.3.6 |a| |ii|| | 1 |
| Nearside Front Drive shaft uj which forms part of the suspension has an inadequately locked flange bolt |2.4.G.4c| | 1 |
| Offside Front Drive shaft uj which forms part of the suspension has an inadequately locked flange bolt |2.4.G.4c| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount x 3 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount x 3 (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear end cap (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount front of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount front of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger rear of spring |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch/inner wing |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing/wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger/chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger/chassis |2.4.A.3| | 1 |
| Brake valve leaking Load sensor valve (1.1.7 (d) (i)) | 1 |
| Front Fuel system component leaking Under the bonnet (6.1.3 (b) (i)) | 1 |
| Nearside Front Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Emissions not tested exhaust snapped |8.2.2.2 |e|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under the wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under the wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill back (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Front hanger (5.3.6 (a) (i)) | 1 |
| Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Across the rear (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under the wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above the axle (6.1.1 (c) (i)) | 1 |
| Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill back in centre (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under the wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under the wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing/wheel arch in 2 places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor near shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired floor |2.4.A.3| | 1 |
| Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under weel arch |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow chalk |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow chalk |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger marked yellow chalk |6.1.B.2| | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow chalk |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger marked yellow chalk |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow chalk |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger near spring hanger marked yellow chalk |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded panel |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded step at sill |2.4.A.3| | 1 |
| Offside Front Lower Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Nearside Front Lower Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the gauge has reached the warning mark |3.3.E.5a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x menber |6.1.B.2| | 1 |
| Offside Rear Brake pipe excessively damaged To flexible (1.1.11 (c)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both D-bushes |5.3.4 |a| |i|| | 1 |
| Steering locking device ineffective steering lock |2.1.3 |d|| | 1 |
| Front Fuel system component leaking ENGINE / GEARBOX AREA |7.2.3| | 1 |
| Offside Body has a sharp edge caused by corrosion LOAD STEP MARKED WITH YELLOW CHALK |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around the load sensing valve.marked |6.1.A.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch .marked |6.1.B.2| | 1 |
| Offside Front Body has a projection caused by corrosion inner arch marked |6.1.C.1| | 1 |
| Nearside Rear Inner Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Offside Rear Inner Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Offside front brakes release unevenly Check calliper as it showing a poor response to brake input and release. |3.7.B.4| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on the chassis frame on rear axle. |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings On foot well. |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering by load valve |6.1.A.1| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings os inner sill os outer sill nsr outer sill osf inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear most bush |2.4.G.2| | 1 |
| Nearside Inner Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floor inner panel |6.1.A.1| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| not working side light not working |1.1.A.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner sills corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear leaf spring rear mountings heavily corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s and n/s rear chassis/valance corroded by rear leaf spring rear mountings. |2.4.A.3| | 1 |
| Offside Inner Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill corroded within suspension component. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch corroded within suspension component. |2.4.A.3| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear valance corroded within tow bar mounting. |6.6.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg in various places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg and spring hanger |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill and inner step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill and step area |5.2.6| | 1 |
| Power steering component|s| leaking rack at input shaft |2.3.3b| | 1 |
| Nearside rear brake recording little or no effort very low |3.7.B.5a| | 1 |
| Statutory seat belt missing REAR SEATBELT MISSING FOR REAR SEAT |5.1.1| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush D BUSH |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush D BUSH |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases front box |7.1.2| | 1 |
| Nearside Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting Front to rear sill corroded (6.1.6 (i) (i)) | 1 |
| Offside Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced Front to rear sill corroded (6.1.1 (b) (ii)) | 1 |
| Rear Integral body structure is fractured and structural rigidity is significantly reduced NS&OS Inner wheel arch and chassis heavily corroded (6.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded cab area |5.2.6| | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting likely to become detached |5.3.3 |a| |ii|| | 1 |
| Suspension arm attachment bracket/mounting likely to become detached wishbone back bonded rubber |5.3.3 |a| |ii|| | 1 |
| Power steering component leaking rack top seal leaking oil |2.1.5 |a|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine reading 4.5 |8.2.2.2 |b|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner body (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner body (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wings (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch front and rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch front rear (6.2.2 (d) (i)) | 1 |
| Nearside Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced all repair patches (6.1.1 (d) (i)) | 1 |
| Offside Front Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced all repair patch (6.1.1 (d) (i)) | 1 |
| Nearside Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Offside Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail behind washer bottle |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring mount box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount box section |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides of chassis nr brake compensator mounting |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill/step several areas |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner/outer sill step area several areas |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill nr spring hanger box section |2.4.A.3| | 1 |
| Front Coil spring not correctly located both |2.4.C.2| | 1 |
| Front Front suspension has excessive play in a lower wishbone bearing |2.5.B.1a| | 1 |
| Offside Rear Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing, chassis corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing, chassis corroded (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Central of sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear inner quarter (6.1.1 (c) (i)) | 1 |
| Driver`s seat insecure Pivot point rivet missing |6.2.A.1| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system at joint with brake hose |1.1.11 |b| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing chassis corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Body component corroded and likely to cause injury n/s/f wing corroded (6.2.1 (a) (i)) | 1 |
| Headlamp levelling device inoperative both lamps (4.1.5 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind rear swinging shackle (5.3.6 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills |6.1.1 |c| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded fletch panel |3.6.C.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting lower crossmember |6.6.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and box section and rear spring mounting all marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and inner wing all marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill, marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch, rear of arch, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member, marked yellow |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.19 limit (8.2.2.2 (a)) | 1 |
| Body component corroded and likely to cause injury both front wings (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded box section, marked yellow |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch , marked yellow |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner arch, marked yellow |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member, marked yellow |6.6.6| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp o/s/r sidelight/stoplamp/fog ,light all slightly dim and flashing same time |1.1.A.3f| | 1 |
| Wheel bearing rough when rotated n/s/f |5.1.3 |b| |i|| | 1 |
| Position lamp adversely affected by the operation of another lamp o/s/r sidelight flashing (4.2.3 (c)) | 1 |
| Stop lamp(s) adversely affected by the operation of another lamp o/s/r stoplamp flashing (4.3.3 (b)) | 1 |
| Rear fog lamp not working o/s/r fog (4.5.1 (a) (ii)) | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of rear leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear of rear leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring hanger area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring hanger near tow bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring hanger lower outer sill (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer subframe mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter pannel (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner footwell |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner footwell |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner box next to leaf spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner box next to leaf spring |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner box |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded SILL CORRODED |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Rear sills and chassis both sides |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner side sill |5.2.6| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded side sill |2.4.A.3| | 1 |
| Brake valve insecurely mounted chassis rusted by valve |3.6.A.2a| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded next to upper engine mount |3.6.C.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under engine mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mount - bump stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mount -outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring hanger rear hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front spring hanger -outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted front spring hanger -inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 1 |
| Front Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted innner sill |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper floor |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rail |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rail |6.1.B.2| | 1 |
| Nearside Front Body panel corroded and likely to cause injury wing to sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Lower Anti-roll bar locating pin retaining device not properly locked |2.4.G.3b| | 1 |
| Rear Exhaust system not adequately supported rear exhaust bracket |7.1.1| | 1 |
| Offside Rear Drive shaft which forms part of the suspension support bearing excessively worn |2.4.G.4d| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Door step area |5.2.6| | 1 |
| Centre Drive shaft which forms part of the suspension support bearing excessively worn Propshaft |2.4.G.4d| | 1 |
| Offside Rear Trailer electrical socket insecure |1.9.3a| | 1 |
| Centre Upper Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Outer Rear Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch / sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Nearside Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg |6.1.1 |c| |i|| | 1 |
| Rear Other passenger door likely to open inadvertently or not remain closed |6.2.3 |b| |ii|| | 1 |
| Other passenger door cannot be opened from outside the vehicle sliding door |6.2.3 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / step area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step / sill |5.3.6 |a| |i|| | 1 |
| Trailer electrical socket |13 pin| not functioning at all wiring missing |4.10 |c| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chalked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above bump stop |5.3.6 |a| |i|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 9.99 (8.2.2.2 (f)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced underneath (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength underneath chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength underneath chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Steering linkage ball joint has excessive play rack knuckle (2.1.3 (b) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded corrosion to both rear inner sills within 30cm of both leaf springs front & rear mounting areas |2.4.A.3| | 1 |
| Central Front Seat belt missing (7.1.2 (a)) | 1 |
| Bonnet primary retaining device ineffective inoperative (3.1 (c)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt swivel (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt swivel (5.3.4 (b) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer cab sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced flitch to chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step support (6.1.1 (c) (i)) | 1 |
| Offside Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Front brake disc inappropriately repaired |3.5.1n| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassis rails leaf springs mount areas (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side step (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front leaf spring mount welding separating (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/f chassis leg |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/f strut top |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hangers n/s&o/s |5.3.6 |a| |i|| | 1 |
| Brake prescribed area is excessively corroded n/s/r chassis leg compensator mount |1.1.21 |e| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/f floor |7.1.1 |a| |i|| | 1 |
| Nearside Outer Front Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerwing (5.3.6 (a) (i)) | 1 |
| Steering wheel weakened by fractures |2.1.1| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill next to leaf spring mount (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill lower b post at seat belt mount (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at b post (complete length) (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced support and sill |6.1.1 |c| |i|| | 1 |
| Power steering pipe/hose excessively corroded as marked (2.1.5 (g) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill as marked (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked front spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength as marked rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength as marked rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired centre out rigger |2.4.A.3| | 1 |
| Nearside Front Floor excessively deteriorated seat mounts and step (6.2.4 (a) (i)) | 1 |
| Offside Front Floor excessively deteriorated inner wheel arch and step (6.2.4 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step and wheel arch marked in yellow (6.2.2 (d) (i)) | 1 |
| Central Front Bonnet primary retaining device ineffective (3.1 (c)) | 1 |
| Central Prop shaft bearing excessively worn both bearing worn (6.1.7 (b) (i)) | 1 |
| Nearside Side repeater missing lens |1.4.A.2b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnett |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has a hole |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has a hole |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step hass a hole |6.1.B.2| | 1 |
| Offside front brake binding 60kgf after brake being pressed |3.7.B.1| | 1 |
| Nearside Obligatory mirror missing door |8.1.1| | 1 |
| Power steering component|s| leaking from rack |2.3.3b| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to cab floor (5.3.6 (a) (i)) | 1 |
| Front Body has a projection caused by corrosion front to rear |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top of chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded lower arm |2.4.A.3| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle loading door |6.2.B.1c| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer rear valance |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting ns inner sill (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting ns outer sill (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting os outer sill (6.2.2 (d) (i)) | 1 |
| Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength os and ns rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired LOWER INNER 1/4 PANEL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired OUTRIGGER |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings LOWER INNER 1/4 PANEL |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings MIDDLE CHASSIS |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x6 |6.1.B.2| | 1 |
| Lower Vehicle structure has a modification which adversely affects braking or steering 8 places |6.1.A.1| | 1 |
| Windscreen damaged and affecting the driver`s view of the road zone A |3.2 |a| |ii|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides inner wing areas |5.3.6 |a| |i|| | 1 |
| Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides wing arch areas |6.1.1 |c| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced front and rear sill area |7.1.1 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded BOX SECTION X 2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded BOX SECTION |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS X 2 |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded DROP SILL |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded and outer |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill rusted |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill rusted |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Nearside Rear Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis compensator mount area |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill by o/s/r spring anchor |6.1.B.2| | 1 |
| Nearside Lower Outline marker lamp showing white light to the rear side |4.2.3 |a| |ii|| | 1 |
| Offside Lower Outline marker lamp showing white light to the rear side |4.2.3 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and step area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and step area (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring chassis outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of leaf spring chassis outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength coil spring turret (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength coil spring turret (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill floor step area (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill floor step area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded load valve mounting point (1.1.21 (e) (i)) | 1 |
| Nearside Inner Brake pipe leaking |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to front leaf pring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to rear leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner panel to rear leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member to rear leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings bump stop |6.1.B.2| | 1 |
| Suspension arm pin or bush excessively worn both front wishbone rear bushes (5.3.4 (a) (i)) | 1 |
| Offside Suspension arm ball joint dust cover missing |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted floor/step |5.2.6| | 1 |
| Front Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Brake actuating linkage mounting prescribed area is deliberately modified which significantly reduces the original strength Nearside Rear Chassis Rail |3.3.A.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch by spring (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis 2 place in inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Prop shaft bearing likely to break up |6.1.7 |b| |ii|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear conner |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear corner |6.2.2 |d| |i|| | 1 |
| Nearside Front Brake pipe excessively damaged to rear |1.1.11 |c|| | 1 |
| Offside Front Brake pipe excessively damaged to rear |1.1.11 |c|| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion near side rear lower door has sharp edge due to corrosion |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering corroded by brake valve |6.1.A.1| | 1 |
| Centre Lower Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt boot split |5.3.4 |b| |ii|| | 1 |
| Brake lever has restricted free movement handbrake (1.1.15 (e)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb fitted incorrectly (4.1.2 (c)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab outrigger holed (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember behind cab holed (6.2.2 (d) (i)) | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail behind cab holed (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember above rear axle holed (6.2.2 (d) (i)) | 1 |
| Exhaust system insecure crossmember supporting rear of exhaust has broken away (6.1.2 (a)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking and braking performance affected wheel cylinder (1.1.16 (b) (ii)) | 1 |
| Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced chassis leg cut and not welded up (6.1.1 (a) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side low effort |1.4.1 |a|| | 1 |
| Central Brake pipe likely to become detached or damaged main run |1.1.11 |d| |ii|| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure and impairing directional stability at rear repair inadequate & front mounting point |5.3.3 |a| |ii|| | 1 |
| Offside Front Lower Suspension arm insecurely attached locking nut not showing threads |5.3.3 |a| |i|| | 1 |
| Rear Brake pipe inadequately supported across axle |3.6.B.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded underbody sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded door step/ underbody sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step/ underbody sill |5.2.6| | 1 |
| Offside Front Upper Suspension arm insecure |2.4.G.1| | 1 |
| Offside Outer Front Lower Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Inner Front Lower Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is severely distorted doorstep under sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under sill badly in several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre / rear chassis rail outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear chassis rail outrigger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear floors/ inner flitches in several ploaces |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear chassis rail / inner flitches badly |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around leaf spring mount |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill several places |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill several places |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill several places |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner bumper valance |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis |3.1.9| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch at floor (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking filter leaking (6.1.3 (b) (i)) | 1 |
| Body has a sharp edge caused by damage o/s door mirror damaged and sharp |6.1.C.1| | 1 |
| Adjustable towbar locating pin retaining device insecure |6.6.5c| | 1 |
| Body component corroded and likely to cause injury Tipper body at off side and rear holed and corroded. |6.2.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Cab floor bearer holed and corroded with in 30 cm of seat belt mounting point. |7.1.1 |a| |i|| | 1 |
| Nearside Floor in such a condition it is likely to cause load insecurity or instability Tipper body main chassis rail holed and corroded at rear. |6.2.4 |a| |ii|| | 1 |
| Nearside Rear Outer Floor in such a condition it is likely to cause load insecurity or instability Tipper body x3 floor bearers holed and corroded. |6.2.4 |a| |ii|| | 1 |
| Offside Rear Outer Floor in such a condition it is likely to cause load insecurity or instability Tipper body x3 floor bearers holed and corroded. |6.2.4 |a| |ii|| | 1 |
| Offside Rear Floor in such a condition it is likely to cause load insecurity or instability Tipper body floor holed and corroded. |6.2.4 |a| |ii|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shocker top |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting inner arch,chassis and inner quarter panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear chassis,inner wheel arch and sills |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock mounting chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear chassis and inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS UNDER BONNET |5.3.6 |a| |i|| | 1 |
| Rear Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chissis |2.4.A.3| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i)) | 1 |
| Front Seat belt locking mechanism does not secure or release drivers seat |5.2.5a| | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release passenger seat closest to door |5.2.5a| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings tipper body and mud guards |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper body and mud guards |6.1.B.2| | 1 |
| Central Prop shaft bearing excessively worn as marked |6.1.7 |b| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed |7.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor pan to sill as marked |2.4.A.3| | 1 |
| Nearside Body panel damaged and likely to cause injury Mirror (6.2.1 (a) (i)) | 1 |
| Offside Body panel damaged and likely to cause injury Mirror (6.2.1 (a) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind rear bumper to inner panel (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of Floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor to inner rear panel (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner of rear arch to sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger to step (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Center of inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross-member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross-member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced Inner sill joint not welded (6.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front of inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front of inner wheel arch to top mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch to floor (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch joint (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of Inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front of inner arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front of inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step sill (6.1.1 (c) (i)) | 1 |
| Centre Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Offside Front Lower Sub-frame rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Shock absorber - all missing when fitted as standard |2.7.1a| | 1 |
| Other passenger door cannot be opened from outside the vehicle side loading door |6.2.3 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner and outer sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger area at rear of spring shackle
|2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` rubbish,books,cds etc on top of dash affecting view to front |8.3.1e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch,floor |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` rubbish,books,cds etc on top of dash affecting view to front |8.3.1b| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer door step marked |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill marked |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill marked |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion bumper bar |6.1.C.1| | 1 |
| Rear Body has a sharp edge caused by corrosion light board |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under arch/inner wing x 2 |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under arch/out rigger/chassis |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded under arch/out rigger/chassis x 5 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under arch/inner wing x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired under arch/inner wing |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired top step to outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired top step to outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired under step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under step/outrigger/chassis |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired under sill back |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under quarter to chassis/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under cross member |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded out rigger/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill back x 3 |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under out rigger/step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired under step |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired under step/sill back |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired under sill back |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Offside Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Outrigger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Square Box / Sill |6.1.1 |c| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre Sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring Hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back panel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sillx2 |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill x3 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section x2 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corner |6.1.B.2| | 1 |
| Nearside Front Brake hose damaged and likely to fail Insecure (1.1.12 (a)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Corner (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step/Sill Area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Box Section (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill Small Hole (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step Area (6.2.2 (d) (i)) | 1 |
| Offside Front Body has a projection caused by corrosion inner arch |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Outrigger |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step/Sill Area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step/Sill Area X 2 |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch @ Front |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch @ Rear X 2 |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch @ Front |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Leg |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis Leg |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Brake hydraulic reservoir cap missing |3.6.G.1a| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top upper attachment (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front and rear mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mountings front and rear (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat mount chassis and floor (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced seat base mounting chassis leg (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired chassis leg not continuous seam weld (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above bump stop (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch area |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced bodymount area |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mount area |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area , interior wood can be seen advise interior removal for repair |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch area near subframe mounting points |6.1.1 |c| |i|| | 1 |
| Inner Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Offside Headlamp not working on dipped beam full beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Lower Sub-frame ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired tops of both chassia legs front to back |6.2.2 |d| |ii|| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting o/s ajcent to rear of step |6.2.2 |d| |i|| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting o/s front chassia leg in wheel arch ajcent to mud flap |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outter step |6.2.2 |d| |i|| | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel |steering rack fitted| inner rack joint |2.3 |a| |i|| | 1 |
| Wheel bearing has excessive play both rear bearings |5.1.3 |a| |i|| | 1 |
| Wheel bearing play so excessive that directional control is impaired bolt broken on o/s front that holds the wheel bearing to the nuckle |5.1.3 |a| |ii|| | 1 |
| Road wheel fixing missing all wheels lose |5.2.1 |a| |i|| | 1 |
| Prop shaft bearing excessively worn center |6.1.7 |b| |i|| | 1 |
| Leaf spring shackle pin or bush likely to become detached both rear spring front bushes u.s |5.3.4 |a| |ii|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step corroded |6.1.B.2| | 1 |
| Fuel tank insecure rear tank strap broken |7.2.1| | 1 |
| Nearside Front Inner Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar/striker plate fractured |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar/striker plate fractured |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front end of rear spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill /outrigger/ rear end of rear spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill 30cm front end rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front end of rear spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill/step |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded under bonnett chassis rail |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded McPherson strut |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured Chassis rail
|2.4.A.3| | 1 |
| Centre Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Inner Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail underside by the brake pipe |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings slam panel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings slam panel |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring mounting point |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear inner panel and chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear inner panel and chassis |2.4.A.3| | 1 |
| Fuel system component leaking from injector pump area |7.2.3| | 1 |
| Nearside Body has a sharp edge caused by damage miror casing |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner quarter |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear of spring outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger front of |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded osr inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded spring hanger/chassis |2.4.A.3| | 1 |
| Nearside Front Valve stem seriously damaged Has cut from trim cap |4.1.D.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear mounts |2.4.A.3| | 1 |
| Nearside Inner Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner rear panel |2.4.A.3| | 1 |
| Nearside Front Macpherson strut fractured |2.4.G.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced insill |6.1.1 |c| |i|| | 1 |
| Front Position lamp not working both front side lights flickering (4.2.1 (a) (ii)) | 1 |
| Nearside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner sill as marked corroded (6.2.2 (d) (i)) | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill hole corroded as marked up (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rails in 2 places rear heavily corroded as marked (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Spring mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis at bottom |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill /step |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step sill / sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner step /sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor side of seat |5.2.6| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear inner sills near front spring eye mounting |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear wheel archers behind wheel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired both rear sills at rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and inner wing |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired both rear inner sills at rear |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded handbrake cable mounting cross member (1.1.21 (e) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riger |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Stop lamp adversely affected by the operation of another lamp Rear brake , fog lamp and tail lights are all being adversely affected by indicator lamps. |1.2.1f| | 1 |
| Nearside Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 PLACES |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded BEHIND WHEEL 2 PLACES |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis,inner wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Cross member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis , compensater valve mount |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Floorpan |5.2.6| | 1 |
| Offside Front Suspension arm synthetic mounting deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting at cross-member |6.6.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL/STEP |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL HOLED |5.3.6 |a| |i|| | 1 |
| Nearside Tailgate insecure pin missing (6.2.1 (a) (i)) | 1 |
| Front Outer All position lamps not working both roof marker lamps |4.2.1 |a|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment no reserve travell |1.1.6 |c|| | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Near to rear leaf spring. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Within 30cm of rear suspension leaf spring mounting. |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering Strut mounting. Corroded. |6.1.1 |a| |ii|| | 1 |
| Nearside Front Suspension arm pin or bush likely to become detached rear bush |5.3.4 |a| |ii|| | 1 |
| Nearside Rear All direction indicators incorrect colour lense broken. |4.4.3 |a|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak centre silencer |8.2.2.1 |b|| | 1 |
| Nearside Front Floor excessively deteriorated entry step |6.2.4 |a| |i|| | 1 |
| Steering column attachment defective to the extent that there is a serious risk of detachment |2.2.2 |d| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg has corrosion holes within 30cm of engine mount (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill has corrosion hole within 30cm of leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole within 30cm of leaf spring mount (6.1.1 (c) (i)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear chassis has corrosion hole within 30cm of O/S leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassea |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting at the rear |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp affected by indicator |1.1.A.3f| | 1 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp affected by indicator |1.3.2f| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear leaf spring mounting area |2.4.A.3| | 1 |
| Offside Front Brake pipe excessively damaged Brake pipe coming from master cylinder behind engine in support clip very corroded(marked with yellow chalk) (1.1.11 (c)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch has corrosion going into interior and there is corrosion within 30cm of leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch has corrosion within 30cm of front leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch has corrosion within 30cm of rear leaf spring mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion within 30cm of leaf spring fixing point (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg has corrosion within 30cm of subframe fixing (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion within 30cm of upper shock fixing (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near shocker (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near shocker (5.3.6 (a) (i)) | 1 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp poss bulb in wrong (4.3.3 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting front and rear (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear shocker mount areas (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay to bulk head as marked (6.1.1 (c) (i)) | 1 |
| All position lamps not working all marker light not working |1.1.A.3b| | 1 |
| Nearside Front Body insecure and dangerous to other road users BUMPER LOOSE |6.1.B.1b| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch area |6.1.A.1| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded Chassis in engine bay |3.6.C.3| | 1 |
| Nearside Rear Leaf spring shackle bracket nut missing |2.4.B.6c| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outer sill marked with chalk |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion inner sill marked with chalk |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion inner sill marked with chalk |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion inner sill marked with chalk |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner front arch marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch marked with chalk |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill marked with chalk |2.4.A.3| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to load valve |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/sill marked with chalk |2.4.A.3| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked with chalk |6.1.B.2| | 1 |
| Offside Front Front position lamp|s| not working replaced bulb rb501 |1.1.A.3b| | 1 |
| Nearside Front Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Offside Front Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Nearside Rear Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Offside Rear Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Offside Front Upper Shock absorber insecure |2.7.2b| | 1 |
| Outer Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill by the foot step |6.1.B.2| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded chassis box/inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis box by cross member |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis box by cross member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch area |2.4.A.3| | 1 |
| Offside Front Brake pipe excessively damaged Beneath master cylinder |1.1.11 |c|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of rear leaf spring area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Body panel corroded and likely to cause injury Wheel arch |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Macpherson strut insecure lower securing bolt |2.4.G.1| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded rear of cab cross member |3.1.9| | 1 |
| Offside Front Headlamp aim not in a clean condition affecting light output |1.2.4a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength a pillar under bonnet (5.3.6 (a) (i)) | 1 |
| Central Front Prop shaft bearing housing insecure mount (6.1.7 (f) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab x 2 (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab x 2 (7.1.1 (a) (i)) | 1 |
| Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of cab (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch x 2 (5.3.6 (a) (i)) | 1 |
| Offside Front Wheel bearing rough when rotated and play (5.1.3 (b) (i)) | 1 |
| Brake performance not tested no clutch pedal (1.2.1 (g)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded undersill/step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill/undersill |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings quater panel |6.1.B.2| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Brake performance not tested brake pedal going to the floor |3.7.A.1| | 1 |
| Fuel system component leaking no4 injector |7.2.3| | 1 |
| Offside Front Body has a projection caused by corrosion bumper |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor area corroded |2.4.A.3| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded brake valve |3.3.A.2| | 1 |
| Service brake grabbing severely and major imbalance at rear |1.2.1 |c|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above wishbone (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced back of seat floor (7.1.1 (a) (i)) | 1 |
| Nearside Body panel corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury Wing (6.2.1 (a) (i)) | 1 |
| Oil leaking continuously from transmission posing a serious risk to road safety Rear differential (8.4.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Side Step (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper Wheel arch Around the suspension leg (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device ineffective cap not opening (6.1.3 (b) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner chassis leg (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner chassis leg (6.2.2 (d) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Leaf spring cracked |2.4.B.1a| | 1 |
| Valve stem seriously damaged |4.1.D.1e| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top suspension mount/inner wing. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis is cracked by cab mount. |2.4.A.3| | 1 |
| Offside Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Rear Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill rear panel and chassis legs |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill rear panel and chassis leg |2.4.A.3| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp all lights |1.4.A.2h| | 1 |
| Offside Vehicle structure excessively corroded within 30cm of towbar mounting inner sill |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to inner arch |2.4.A.3| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded in several places |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded in several places |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger corroded in several places |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger corroded in several places |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner door step corroded |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis corroded |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg corroded in several places |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing corroded in several places |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing corroded |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch corroded in several places |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch corrode in several places |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear panel corroded |6.2.2 |d| |i|| | 1 |
| Nearside Inner Front Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating dipped |1.1.A.3b| | 1 |
| Nearside Front Front position lamp|s| not working dipped h/light |1.1.A.3b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie several places |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie several places |6.1.B.2| | 1 |
| Rear Parking brake lever has no reserve travel both |3.1.6b| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear to front sill |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear to front sill |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint pipes on rack |2.3.3b| | 1 |
| Nearside Rear Seat belt installation causes a lap belt to be incorrectly positioned across the occupant |5.3.1u| | 1 |
| Nearside passenger door catch insecure |6.2.B.2| | 1 |
| Nearside Body component damaged and likely to cause injury side panels |6.2.1 |a| |i|| | 1 |
| Nearside Obligatory mirror missing door |3.3 |a|| | 1 |
| Central Rear Obligatory mirror does not provide a view to the rear missing |3.3 |c|| | 1 |
| Prop shaft bearing housing likely to fail centre |6.1.7 |f| |ii|| | 1 |
| Offside Lower Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected |steering rack fitted| knuckle worn |2.3 |a| |ii|| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/s rear leaf spring areas |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/s/r leaf spring areas |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded N/s/r main chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/s/r main chassis |2.4.A.3| | 1 |
| Ball joint has excessive play Ball joint insecure |2.2.B.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear structure/wheel arch area excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear of leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Front and rear of leaf spring |2.4.A.3| | 1 |
| Nearside Macpherson strut insecure at pinch bolt |2.4.G.1| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings between the front and rear wheel arch |6.1.B.2| | 1 |
| Central Rear Seat belt not functioning as intended 1st seat in rear belt jammed in upper fixing |7.1.2 |c|| | 1 |
| Offside Rear Seat belt not functioning as intended 1st inner seat belt twisted cannot be pulled as intended |7.1.2 |c|| | 1 |
| Offside Inner Body panel damaged and likely to cause injury Interior panel between rows 1 and 2 holed splintered |6.2.1 |a| |i|| | 1 |
| Offside Seat belt retracting mechanism defective 2nd row |5.2.5b| | 1 |
| Offside Seat belt locking mechanism does not secure or release 2nd row belt jammed |5.2.5a| | 1 |
| Offside Seat belt stitching badly frayed 3rd row |5.2.2b| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release and locking mechanism damaged |5.2.5a| | 1 |
| Exhaust fumes entering the passenger area |7.1.5| | 1 |
| Offside Front Upper Side repeater incomplete |1.5.A1b| | 1 |
| Centre Front Emissions not tested |7.0| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis rail |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill (7.1.1 (a) (i)) | 1 |
| Power steering component leaking rack/pipes (2.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail / bulkhead |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing/chassis leg |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger mount area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front hanger mount area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear swing link mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi x2 places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassi under wing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected innersill at step area |5.3.6 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis over axle outer face (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured at anchor bush |5.3.1 |b| |ii|| | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror cover missing (6.2.1 (a) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at front spring mount |5.3.6 |a| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis at brake flexi mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Statutory seat belt missing belt clip |5.1.1| | 1 |
| Centre Rear Statutory seat belt missing belt clip |5.1.1| | 1 |
| Fuel tank insecure rear tank strap |7.2.1| | 1 |
| Brake performance not tested BRAKE PIPE LEAKING (1.2.1 (g)) | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system ON AXLE (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT SPRING MOUNT (5.3.6 (a) (i)) | 1 |
| Central Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength PRO SHAFT MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER INNER (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength MIDDLE CHASSIS (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill back patch not fully welded |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired repair patch not fully welded |5.3.6 |a| |i|| | 1 |
| Offside Front Leaf spring main leaf fractured front eye |5.3.1 |b| |ii|| | 1 |
| Offside Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Rear Driver`s seat insecure |6.2.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded STEP |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded SILL IN A COUPLE OF PLACES |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded UNDER STEP |5.2.6| | 1 |
| Nearside Rear Anti-roll bar inappropriately repaired DROPLINK |2.4.A.2| | 1 |
| Offside Rear Anti-roll bar insecure INSECURE |2.4.G.1| | 1 |
| Seat belt cut sufficient to obstruct correct operation of the belt rear seats loader unable to check |5.2.2a| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is inadequately repaired |3.1.9| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded multiple areas of corrosion |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded multiple areas of corrosion |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded multiple areas of corrosion |2.4.A.3| | 1 |
| Fuel system component leaking injector pump area |7.2.3| | 1 |
| Nearside Rear Leaf spring cracked at the front spring eye |2.4.B.1a| | 1 |
| Offside Front Steering arm has had excessive heat applied |2.2.C.1e| | 1 |
| Offside Front Steering arm repaired by welding |2.2.C.1e| | 1 |
| Offside Inner Front Track rod end damaged and unserviceable |2.2.C.1d| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre |5.2.6| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill in various places an floor (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill in various places and inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded including out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded including out rigger |2.4.A.3| | 1 |
| Inner Rear An item not tested |Manual| | 1 |
| Front Subframe mounting prescribed area is excessively corroded step sills |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting ares/ both sides |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings heavy corrosion underside vehicle 16 welding |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to chassis rails |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected leafspring area |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and rear inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch front mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch suspension rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded closing panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger rusted |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill spring hanger |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded step rusted |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded step rusted |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded closing panel rusted |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill rusted |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper arch to chassis rail |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leafspring mounting box sections |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rail upper and under marked in yellow |6.1.B.2| | 1 |
| Nearside Front Lower Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected under bonnet electrical wiring and jump leads connecting two batterys (4.11 (a) (ii)) | 1 |
| Suspension component mounting prescribed area is excessively corroded Both rear chassis legs |2.4.A.3| | 1 |
| Nearside Inner Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step area |7.1.1 |a| |i|| | 1 |
| Central Lower Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in 4 places |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in 1 place |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill in 1 place |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer, near load sensor valve |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer of chassis |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in 2 places |2.4.A.3| | 1 |
| Nearside Front Front position lamp|s| not working SIDE LIGHT INOP |1.1.A.3b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis caroded around outrigger / spring hanger |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings carroded around outrigger / spring hanger |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded around load sensing valve |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded above bump stop |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s outer sills corroded with in 30Cm of spring hangers |6.1.B.2| | 1 |
| Rear position lamp|s| incorrect colour BOTH REAR REV LIGHTS STAYING ON WHITE LIGHT |1.1.A.3e| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded OUTER AND INNER DOOR SILL |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded INNER AND OUTER SILL |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine support frame (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis holed |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch holed near strut mounting |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer sill holed corroded along side |6.1.C.1| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion sill corroded & holed |6.1.C.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member corroded in centre & ends |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch area |2.4.A.3| | 1 |
| Offside Front Brake pipe kinked To flexy hose |3.6.B.2b| | 1 |
| Offside Front Brake pipe inadequately clipped To flexy hose |3.6.B.1| | 1 |
| Nearside Front Brake pipe inadequately clipped To flexy hose |3.6.B.1| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SIDE SILL (6.2.2 (d) (i)) | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting insufficient repair (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to door step (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Step - Forward Portion Towards Wheel Arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch - Upper Area (6.1.1 (c) (i)) | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Rear Of Cab - Lower Lip Above Chassis Between Tipper Body And Back Of Cab (6.2.2 (d) (i)) | 1 |
| Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Rear Of Cab - Lower Lip Above Chassis Between Tipper Body And Back Of Cab (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill by spring eye , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger / inner sill by spring shackle , marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember to rear of spring , marked (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing excessively worn 2nd support bearing (6.1.7 (b) (i)) | 1 |
| Hazard warning switch faulty Only operates with indicator switch off centre position |1.4.B.1d| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded To rear of drivers step ,marked |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring eye / inner sill , marked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis rail / cross member , marked behind spring shackle |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Underside by fuel tank (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Underside , near fuel tank , marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Passenger step (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to rear of step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to rear of step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill ahead of wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner quarter underneath |2.4.A.3| | 1 |
| Offside Rear Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shock area (5.3.6 (a) (ii)) | 1 |
| Brake cable has wires broken and is significantly weakened front hand brake cable broken |3.5.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Spring Hanger |6.1.B.2| | 1 |
| Drivers door hinge insecure a pillar corroded (6.2.3 (c) (ii)) | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative compensator (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Brake cable damaged fouling on road wheel (1.1.15 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced step, inner & outer sills (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced step, inner & outer sills (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor pan (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced cab back (7.1.1 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central chassis (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush Pair |d bushes| |2.4.G.2| | 1 |
| Lower Steering column universal joint retaining device insecure |2.1.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis x3 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis x2 |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch. |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under arch. |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under arch on rail. |2.4.A.3| | 1 |
| Rear Electrical wiring damaged and bare wires exposed at tow bar. |1.9.2c| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chalked area |2.4.A.3| | 1 |
| Centre Passenger`s seat insecure babyseat |6.2.A.1| | 1 |
| Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc inner |2.5.C.1a| | 1 |
| Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc outer |2.5.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg on top |2.4.A.3| | 1 |
| Nearside Passenger grab handle insecure loose |9.6 |b| |ii|| | 1 |
| Nearside Rear Suspension component missing bump stop missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension component missing bump stop missing (5.3.3 (a) (ii)) | 1 |
| Rear Seat belt retracting mechanism defective Rear seats, front row, centre belt (7.1.2 (e)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger (6.2.2 (d) (i)) | 1 |
| Offside Front Leaf spring fractured (5.3.1 (b) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner wheel arches (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner wheel arches (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area |6.1.B.2| | 1 |
| Rear Suspension has inadequate clearance with the bump stop both deteriorated |2.4.A.1a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer lower rear wing|behind bumper| |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch in three places |5.3.6 |a| |i|| | 1 |
| Centre Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
| Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Body has an unsafe modification sharp edge |6.2.1 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper chassis leg / engine mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear out rigger |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear spring mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear inner panel |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear inner panel |6.2.2 |d| |i|| | 1 |
| Front Fuel tank insecure strap broken |6.1.3 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour Lens broken. |1.4.A.2f| | 1 |
| Nearside passenger door cannot be opened from outside the vehicle Side door. |6.2.B.1c| | 1 |
| Parking brake not fitted on at least two wheels No cable too n/s . |3.1.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber top mounting area. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear area of n/s/r Spring. |2.4.A.3| | 1 |
| Nearside Rear Lower Position lamp not working |4.2.1 |a|| | 1 |
| Fuel cap/sealing device ineffective temp |6.1.3 |b| |i|| | 1 |
| Outer Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Tie bar/rod cracked |2.4.G.1| | 1 |
| Offside Front Inner Steering component mounting prescribed area is excessively corroded arch |2.2.C.1h| | 1 |
| Nearside Rear Brake valve retaining device insecure |3.6.A.2d| | 1 |
| Fuel system component leaking injector seals |7.2.3| | 1 |
| Offside Seat belt retracting mechanism defective Not retracting (7.1.2 (e)) | 1 |
| Nearside Front Outer Seat belt retracting mechanism defective Jammed (7.1.2 (e)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp Affected by position lamp (4.3.3 (b)) | 1 |
| Electrical wiring likely to touch hot or rotating parts Wiring resting on exhaust system (4.11 (a) (iii)) | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture Not clipped in position and rubbing (1.1.11 (a)) | 1 |
| Braking system leaking pipe leaking across bulkhead |3.6.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |wheel arch| |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step within 30cm of seat/seatbelt mounting |5.2.6| | 1 |
| Offside Front Suspension arm locating pin retaining device not properly locked bottom arm front bolt nut |2.4.G.3b| | 1 |
| Offside Front Suspension arm locating pin locking device not properly locked front |2.4.G.3b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis legs, rear chassis nearside and offside and along rear panel |6.1.1 |c| |i|| | 1 |
| Exhaust has a major leak of exhaust gases broken off in centre |7.1.2| | 1 |
| Emissions not tested due to exhaust condition |7.3.A.1| | 1 |
| Offside Inner Front Front suspension has excessive movement at wishbone bearing |2.5.A.1c| | 1 |
| Rear Brake pipe inadequately clipped all |3.6.B.1| | 1 |
| Rear Brake pipe inadequately supported all |3.6.B.1| | 1 |
| Nearside Leaf spring anchor bracket modified and seriously weakened |2.4.A.2| | 1 |
| Nearside Leaf spring damaged and permanently distorted |2.4.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded swhocker |2.4.A.3| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Rear Direction indicators adversely affected by the operation of another lamp both hazard |1.4.A.2h| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring monting |5.3.6 |a| |i|| | 1 |
| Offside Suspension spring mounting prescribed area is inadequately repaired centre rear |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill back of wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch to sill
|2.4.A.3| | 1 |
| Front Position lamp not working both lamps |x2| |4.2.1 |a|| | 1 |
| Fuel system component leaking excessively or a risk of fire in engine bay area |6.1.3 |b| |ii|| | 1 |
| Power steering component leaking rack where pipes attach |2.1.5 |a|| | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt clip missing |6.1.7 |g| |ii|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills heavily holed |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill holed |6.2.2 |d| |i|| | 1 |
| Rear Direction indicator not working both |1.4.A.2c| | 1 |
| Rear Rear fog lamp adversely affected by the operation of another lamp both |1.3.2f| | 1 |
| Offside Inner Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
| Central Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch / strut mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Door step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of wheel inner arch/ inner panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of wheel inner arch/ inner panel |2.4.A.3| | 1 |
| Front Brake lining|s| insecure |3.5.1g| | 1 |
| Front Engine mounting bracket damaged or deteriorated resulting in excessive movement engine support |6.1.8 |a| |i|| | 1 |
| Front Engine mounting damaged or deteriorated resulting in excessive movement CROSS MENBER (6.1.8 (a) (i)) | 1 |
| Centre Exhaust system not adequately supported & corroded |7.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner quarter to outrigger |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill end to wheel arch |2.4.A.3| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp with every other lamp on that side |4.2.3 |c|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn front mount loose |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured chassis rail by shock top mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis rail by top shock mount |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis rail by engine mount |3.6.C.3| | 1 |
| Fuel tank insecure 1x strap broken (6.1.3 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength complete underside of vehicle excessive corrosion and requires welding in too many places to individually list (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill under step |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill behind step |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Chassis next to load valve |2.4.A.3| | 1 |
| Nearside Inner Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Tailgate cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Nearside Outline marker lamp missing |4.2.1 |a| |ii|| | 1 |
| Offside Rear Position lamp lens seriously defective cracked white light showing (4.2.1 (b)) | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users black smoke under acceleration (8.2.2.2 (c)) | 1 |
| Rear Body panel likely to become detached light bar panel holding rear lights (6.2.1 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Offside Rear Seat belt retracting mechanism defective (7.1.2 (e)) | 1 |
| Offside Rear Seat belt retracting mechanism defective next row (7.1.2 (e)) | 1 |
| Suspension arm pin or bush excessively worn off and nearside front (5.3.4 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength off and nearside rear and chassis split at weld (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner wing (5.3.6 (a) (i)) | 1 |
| Front position lamp|s| not working both fronts |1.1.A.3b| | 1 |
| Front position lamp|s| not working both rears |1.1.A.3b| | 1 |
| Brake pipe inadequately supported both front to rear pipes to flexs |3.6.B.1| | 1 |
| Brake linkage excessively corroded cross member corroded and bracket come away. |1.1.15 |b|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides outriggers supporting chassis marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring anchor pin or bush likely to become detached front eyelet broken |5.3.4 |a| |ii|| | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn d bush |5.3.4 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed |6.1.1 |c| |i|| | 1 |
| Rear Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced body plates at rear marked in yellow |both |6.1.1 |b| |ii|| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch lower |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch lower |6.1.1 |c| |i|| | 1 |
| Offside Rear Lower Tie bar/rod locating pin retaining device not properly locked |2.4.G.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured door latch |5.2.6| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure elongated |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure elogated |2.4.G.1| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired rear of cab |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step and inner sill x 3 (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear shackle |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing ang chassis |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded at fwd and rear hangar |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by fwd and rear spring mounting point |2.4.A.3| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner step seat mount |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing x3 |2.4.A.3| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear cills corroded |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear cills |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear leaf spring area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leaf spring area |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre cill |6.1.B.2| | 1 |
| Supplementary Restraint System warning lamp indicates a fault airbag light on dash |5.4.2| | 1 |
| Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Seat belt affected by an insecure seat fixing not tested |5.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded body to chassis |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded body to chassis |2.4.A.3| | 1 |
| Bonnet primary retaining device excessively deteriorated NON OPENING |3.1 |c|| | 1 |
| Front Fuel tank insecure STRAP |6.1.3 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING REAR MEMBER |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR SPRING FRONT MEMBER |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength PANEL/BOX |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body panel corroded and likely to cause injury DOOR STEP SECTION |6.2.1 |a| |i|| | 1 |
| Nearside Rear Outer Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Leaf spring seriously weakened broken |5.3.1 |b| |i|| | 1 |
| Seat belt anchorage loose nearside front seat insecure |7.1.1 |b|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed at seat mount |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis holed, next to brake pipe |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis holed, below brake servo |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength body holed at inner wheel arch, next to spring upper mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed at spring front mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed, at spring front mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis holed, at spring front mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis at spring front mount, both sides of chassis holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner valance, at spring rear mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis, at spring rear mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis, along side spring rear mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis holed, at rear of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring rear mount, inner valance holed |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor holed, above spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear fixing |2.4.A.3| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut not locked loose in hub |2.5.B.1a| | 1 |
| Nearside Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill close to step holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis close to cross member holed |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Hydraulic fluid leaking continuously posing a serious risk to road safety brake pipe |8.4.1 |a| |ii|| | 1 |
| Offside Front Track rod end ball joint has excessive play and boot (2.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis near rear bump stop. |2.4.A.3| | 1 |
| Fluid suspension unit leaking |2.4.D.2| | 1 |
| Upper Steering column universal joint insecure |2.1.5| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill holed |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill holed |multiple| |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch area holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch area holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of leafspring mount holed |X2| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of leafspring mount holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leafspring mount holed |2.4.A.3| | 1 |
| Nearside Front Hydraulic brake cylinder locking device insecure |3.6.A.2d| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis split |6.1.B.2| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings chassis split |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner door step corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step / sill holed and corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body mounting fixings insecure such that stability is seriously impaired two body mountings corroded |6.2.2 |c| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Near wheel (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Rear Brake pipe at imminent risk of failure or fracture To brake valve (1.1.11 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded front step inner sill area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded front step inner sill area |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear of spring inner sill and x member /floor area yellow marked |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded front and rear of spring inner sill and x member /floor area yellow marked |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded o/s and n/s lower/inner steps |5.2.6| | 1 |
| Centre Seat belt locking mechanism does not secure or release rear most |5.2.5a| | 1 |
| Rear Body has a projection caused by damage bumper centre section |6.1.C.1| | 1 |
| Offside Rear Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch front |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill X2 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch area as marked |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded X2 inner sill |5.2.6| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting rear chassis |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger|rear| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger|rear| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger|front| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded anchor shackle and bump stop |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer/under sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer/under sill |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer/under sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer/under sill |2.4.A.3| | 1 |
| Offside Front Anti-roll bar locating pin retaining device missing |2.4.G.3b| | 1 |
| Front Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member next to towbar (6.1.1 (c) (i)) | 1 |
| Braking system leaking load valve wet |3.6.A.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 holes os sill (5.3.6 (a) (i)) | 1 |
| Central Obligatory mirror missing (3.3 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear bush mounting rotten (5.3.6 (a) (ii)) | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis panel yellow chalk rotten (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced panel repair (6.1.1 (d) (i)) | 1 |
| Offside Front Brake disc insecure discs attachment bolts loose!!! (1.1.14 (a) (ii)) | 1 |
| Fuel tank insecure fuel strap snapped (rot through) (6.1.3 (a) (i)) | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only too stiff to release |3.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x4 |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded step back and rear sill back |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded step back and full sill bak |2.4.A.3| | 1 |
| Offside Steering retaining device missing |2.2.C.1g| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cracked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis cracked |6.1.B.2| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shocker mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker mounting inner and outer |2.4.A.3| | 1 |
| Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings front of rear wheel |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear and front of rear wheel |6.1.B.2| | 1 |
| Offside Body component corroded and likely to cause injury step for rear body (6.2.1 (a) (i)) | 1 |
| Offside Rear Lower Drag link end loose |2.2.B.1d| | 1 |
| Front Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Offside Rear Tie bar/rod has excessive play in a pin/bush drop link |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg in engine bay |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg in engine bay |2.4.A.3| | 1 |
| Nearside Rear brake drum contaminated by oil hub seal leaking |3.5.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill and arch holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring shackle bracket area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring shackle bracket area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg, top shock mounting area |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg, top shock mounting area |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mounting area. under FLOOR |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock mounting area. under FLOOR |5.3.6 |a| |i|| | 1 |
| Nearside Rear Leaf spring main leaf fractured Front coil |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger and undersill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded undersill area |2.4.A.3| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross section area |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis and inner wing area |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger near spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger area |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill section to rear out rigger area |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door sill area |7.1.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp all lights on cluster flashing |1.4.A.2h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outriggers and chassis box sections to anchor and shackle mounts |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outriggers and chassis box sections to anchor and shackle mounts |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer and inner sill box sections badly corroded |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under step and outrigger area |5.2.6| | 1 |
| Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Rear Exhaust system not adequately supported rubber |7.1.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill holed, multiple places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded complete outer sill holed and distorted, multiple places |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under doorstep area holed and distorted, visible from under vehicle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under doorstep area holed and distorted, visible from under vehicle |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill holed, multiple places |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed and distorted, multiple places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear panel holed and distorted |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear panel holed and distorted |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to chassis leg holed, visible from under vehicle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch to chassis leg holed, visible from under vehicle |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded front inner wheel arch distorted |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower inner wheel arch holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded door steps both sides |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear inner wheel arch to floor both sides |2.4.A.3| | 1 |
| Nearside Rear Suspension component missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension component missing (5.3.3 (a) (ii)) | 1 |
| Windscreen damaged and affecting the driver`s view of the road due to prolonged use of defective wiper |3.2 |a| |ii|| | 1 |
| Anti-roll bar pin or bush excessively worn rear D bushes (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Boot floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted above axle |bump stop| |2.4.A.3| | 1 |
| Fuel tank insecure Tank strap broken |7.2.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded x2 |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded x2 |5.2.6| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded x6 |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 5x |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded 13 pathes |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger and panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength out rigger and panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear cill panel corroded near spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake hose twisted |3.6.B.4c| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to wheel arch |6.1.B.2| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Outter sill |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis |6.1.1 |a| |ii|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner step |6.2.2 |d| |i|| | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill wheel arc |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill |6.2.2 |d| |ii|| | 1 |
| Central Exhaust emissions exceed level of metered smoke for a turbo charged engine |8.2.2.2 |b|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Rear swinging shackle mount |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corner, marked yellow |2.4.A.3| | 1 |
| Central Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 1 |
| Inner Front Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Front position lamp|s| not working b/s |1.1.A.3b| | 1 |
| Centre Rear Bonded suspension unit attachment loose |2.4.F.1a| | 1 |
| Centre Rear Bonded suspension unit attachment cracked |2.4.F.1b| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Corner |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under step |6.1.B.2| | 1 |
| Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sills most rear (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced across axle behind towbar (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced near wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis rail in engine bay |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Wheel arch/ chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front leaf spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring hanger |2.4.A.3| | 1 |
| Nearside brake caliper locking device insecure |3.5.1l| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill under seat belt mounting. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mounting excess corrosion, holed. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected before and after rear spring hangars (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected before and after rear spring hangars (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing by spring mounting. |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing by chassis. |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing by spring mounting. |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is inadequately repaired Inner wing by chassis. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front of spring mounting. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear of spring mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear of spring mounting. |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded By seatbelt mounting in sill. |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded By seatbelt mounting in sill. |5.2.6| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded Step by subframe mounting. |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded Step by subframe mounting. |2.4.A.3| | 1 |
| Upper Fuel tank leaking |7.2.3| | 1 |
| Offside Front Lower Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member / panel |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wheel arch in 2 places chalked |2.4.A.3| | 1 |
| Nearside Rear Stop lamp emits other than a steady red light lamp unit faded |1.2.1e| | 1 |
| Nearside Brake pipe inadequately supported front to rear |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer/inner sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded side step |2.4.A.3| | 1 |
| Rear fog lamp emits a light other than red lens damaged |1.3.2e| | 1 |
| Front front brakes release unevenly o/s worse |3.7.B.4| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch/floor pan |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded centre chassis |2.4.A.3| | 1 |
| Front Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Service brake efficiency less than 50% of the required value NOT WORKING |1.2.2 |a| |ii|| | 1 |
| Offside Rear Service brake efficiency less than 50% of the required value NOT WORKING |1.2.2 |a| |ii|| | 1 |
| Nearside Front Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Offside Dropside cannot be secured in the closed position straped up |6.4.1| | 1 |
| Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both sides several places as marked at rear of leaf springs |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill areas |5.3.6 |a| |i|| | 1 |
| Offside Rear Bonded suspension unit attachment cracked |2.4.F.1b| | 1 |
| Obligatory mirror seriously damaged, affecting the rear view Nearside And Offside |8.1.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner Sill Below Step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis Rail Above Bump Stop |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis Rail Above Bump Stop |2.4.A.3| | 1 |
| Nearside Suspension component ball joint excessively worn TRACK ROD END (5.3.4 (a) (i)) | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) TRACK ROD END WORN (2.3 (a) (i)) | 1 |
| Nearside Rear Inner Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension bellows modified so that its function is seriously affected (5.3.5 (b) (ii)) | 1 |
| Offside Rear Suspension bellows modified so that its function is seriously affected (5.3.5 (b) (ii)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded chassis at o/s/f suspension tower |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r and n/s/r chassis at leaf spring rear mounts |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded at chassis o/s/r leaf spring front mount |2.4.A.3| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt o/s/f and n/s/f lower ball joints |2.4.G.2| | 1 |
| Offside Front Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Wheel bearing has excessive play both rear nearside (5.1.3 (a) (i)) | 1 |
| Offside Rear Wheel bearing has excessive play back (5.1.3 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded crossmember by spare |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x4 on outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring x 3 places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring x 2 places |2.4.A.3| | 1 |
| Nearside Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear most leaf spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner + outer sill + inner wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner 1/4-sill |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded Inner sill & doorstep |5.2.6| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded Outer & inner sill |5.2.6| | 1 |
| Offside Rear Inner Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis / inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis/ inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear shackle, multiple |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear shackle , multiple |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door lower hinge to body corroded |6.1.B.2| | 1 |
| Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under body sill |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under body sill |6.2.2 |d| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under body sill |6.2.2 |d| |ii|| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed |6.1.1 |c| |ii|| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed x2 |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed x3 |6.1.1 |c| |ii|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed x3 |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hanger x4 holes |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis to body holed |6.1.1 |c| |ii|| | 1 |
| Offside Front Body insecure to the extent that stability is seriously impaired wing |6.2.2 |a| |ii|| | 1 |
| Nearside Front Body has a sharp edge caused by damage indicator lens damaged |6.1.C.1| | 1 |
| front brakes release unevenly both slow |3.7.B.4| | 1 |
| Offside Hazard warning lamps not flashing in phase, with ignition on |1.5.4b| | 1 |
| Offside Hazard warning lamps not flashing in phase, with ignition off |1.5.4b| | 1 |
| Nearside Axle beam cracked |2.5.A.5a| | 1 |
| Offside Axle beam cracked |2.5.A.5a| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings chassis leg inner |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear suspension mounting point |6.1.B.2| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger arch area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings under arch to floor area |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp lamp unit |1.1.A.3f| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both outer sills |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sills |7.1.1 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill step and wheel arch |6.1.B.2| | 1 |
| Offside Rear Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer face of chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer face of chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember above antiroll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar linkage mounting prescribed area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar linkage mounting prescribed area (5.3.6 (a) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner and outer sill |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner and outer sill |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced outer sill holed (6.1.1 (a) (i)) | 1 |
| Offside Inner Vehicle structure is fractured and structural rigidity is significantly reduced wing (6.1.1 (a) (i)) | 1 |
| Offside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill holed corroded (6.1.1 (a) (i)) | 1 |
| Nearside Front Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill holed corroded (6.1.1 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch holed corrode d,, (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced wheel arch holed corroded (6.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced ALL THE FOOT STEP,INNER AND OUTER SILL, (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL, ALL THE INNER FOOT STEP (7.1.1 (a) (i)) | 1 |
| Nearside Rear Lower Brake cable damaged chafed (1.1.15 (a)) | 1 |
| Nearside Front Body panel insecure WING (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis door step seat mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis spring hanger |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch corroded holed |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded step/outrigger |2.4.A.3| | 1 |
| Offside Front Upper Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Upper Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
| Offside Front Upper Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
| Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance Light lens damaged |1.4.A.2e| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (on top) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (bottom) (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember holed at offside and nearside (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (on top) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (on top and side) (5.3.6 (a) (i)) | 1 |
| Prop shaft bearing housing insecure centre bearing mounting torn (6.1.7 (f) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded In four areas around rear Spring mounting |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded In cab, behind seat |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Underneath, beside step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Underneath, beside step |5.2.6| | 1 |
| Front Parking brake mechanism/associated mounting prescribed area is excessively corroded Above fuel tank and exhaust |3.1.9| | 1 |
| Nearside Rear Body component corroded and likely to cause injury body to chassis (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury body to chassis (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wing welding (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing welding (5.3.6 (a) (i)) | 1 |
| Offside Front Macpherson strut attachment bracket/mounting likely to become detached bolt strut to hub (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength heavy corrosion behind rear shackle (5.3.6 (a) (i)) | 1 |
| Rear Prop shaft joint excessively worn uj heavily worn (6.1.7 (c) (i)) | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced above bump stops |6.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced above bump stops |6.1.1 |a| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured spring hanger broken |5.3.1 |b| |ii|| | 1 |
| Offside Front suspension ball joint securing nut not locked |2.5.B.1a| | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases exhaust doesnt protrude either at the side or rear |7.1.2| | 1 |
| Nearside Front Glazing/screen/partition not made of safety glass or safety glazing |6.9.8| | 1 |
| Exhaust system not adequately supported rubber broken |7.1.1| | 1 |
| Nearside Rear passenger door catch deteriorated so the door cannot be readily opened or closed sliding door handle broken |6.2.B.2| | 1 |
| Offside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill corroded / holed | under battery tray | |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by damage door handle broken sharp edges |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger / inner sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded seen from under bonnet / chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded seen from under van / chassis rail |2.4.A.3| | 1 |
| Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Brake pedal anti-slip provision incomplete split |3.3.A.1b| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush mounting bolt loose |2.4.G.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides floor palels |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings valance nearside to offside |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch 2 places one on side of chassis |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner archs |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner sills front to rear |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides body outrigers |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to floor panel |6.1.B.2| | 1 |
| Axle has inadequate clearance with the bump stop both sides missing |2.4.A.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner quarter panel to chassis |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f, n/s/f & n/s/r. |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Centre Sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind Nearside Wheel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings Leaf Spring Anchor Point |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Beam |6.1.B.2| | 1 |
| Nearside Rear Shock absorber has an excessively worn bush Missing |2.7.4| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward spring mount |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is inadequately repaired inner wing under bonnet |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded forward spring mount |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis under bonnet by engine mount |6.1.A.1| | 1 |
| Rear Inner Anti-roll bar pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corrosion holes around anti roll bar linkage mounting point (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced behind drivers seat base (7.1.1 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember too rear (6.1.1 (c) (i)) | 1 |
| Nearside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Fuel tank insecure front strap detached (6.1.3 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is inadequately repaired Both sills & inner sills |5.2.6| | 1 |
| Rear Anti-roll bar linkage insecure both |2.4.G.1| | 1 |
| Offside Rear Body insecure and dangerous to other road users lower tail board pin missing |6.1.B.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded door step holed and corroded |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassi leg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion with-in 30cm of leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion with-in 30cm of upper shock mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion with-in 30cm of leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion with-in 30cm of upper shock mount (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded outer sill/step |5.2.6| | 1 |
| Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Fuel tank insecure Rear strap corroded/broken |6.1.3 |a| |i|| | 1 |
| Offside Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
| engine mounting bracket insecure and likely to fail Rear gearbox mount |6.1.D.1b| | 1 |
| Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both front sill heavily corroded |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings battery tray hevily corroded |6.1.B.2| | 1 |
| Front Windscreen washer control missing |8.2.1a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at shockabsorber |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to step |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to step |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill cross member |5.3.6 |a| |i|| | 1 |
| Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x member (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush front b ush |2.4.B.2| | 1 |
| Offside Front Bonded suspension unit deteriorated and cannot function as intended rear bush |2.4.F.3| | 1 |
| Nearside Rear Brake load sensing valve linkage defective and function impaired linkage missing (1.1.17 (a)) | 1 |
| Nearside Rear Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Nearside Rear Outline marker lamp lens seriously defective missing (4.2.1 (b)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill under step |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill rear |6.2.2 |d| |i|| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both inner arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing Marked |2.4.A.3| | 1 |
| Offside Front Outer Body has a projection caused by corrosion wing |6.1.C.1| | 1 |
| Front Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded excessive corrosion to o/s sill within 30cm of a seat belt mounting point. |5.2.6| | 1 |
| Offside Front Inner Front suspension has excessive movement at a wishbone pin or bush wishone |2.5.A.1c| | 1 |
| Offside Rear Suspension arm has excessive play in a pin/bush o/s/f rear bush |2.4.G.2| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both chassis rail uppers |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rails both sides as chalked |6.1.1 |c| |i|| | 1 |
| Integral body structure is fractured and structural rigidity is significantly reduced both inner and outer sills front to rear and front steps as chalked |6.1.1 |a| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floors to inner aches both sides as chalked |6.1.1 |c| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear chassis rails + rear incorrect repairs |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner arches |5.3.6 |a| |i|| | 1 |
| Offside Front Battery insecure and likely to cause a short circuit under seat |4.13 |a| |ii|| | 1 |
| Nearside Lower Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis support Beam 1 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis support beam 1 |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis support beam 2 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis support beam 2 |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer sill corroded |6.1.C.1| | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion step corroded |6.1.C.1| | 1 |
| Central Rear Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wish bone rear bush |2.4.G.2| | 1 |
| Body has a sharp edge caused by corrosion rear tail board |6.1.C.1| | 1 |
| Offside Front Brake pipe inadequately supported innerwing |3.6.B.1| | 1 |
| Offside Rear Oil leaking excessively from transmission hub seal (8.4.1 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded floor corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger inner sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded outrigger
|2.4.A.3| | 1 |
| Stop lamp(s) not working Both Sides (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Statutory seat belt missing buckle missing |5.1.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded rear chassis rail |2.4.A.3| | 1 |
| Rear Braking system leaking weight compensator |3.6.A.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to leaf spring mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within distance of the toe bar mount |6.1.B.2| | 1 |
| Offside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings driver side step not repaired proper |6.1.B.2| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings under passenger door |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of rear rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength of rear spring (5.3.6 (a) (i)) | 1 |
| Windscreen damaged and affecting the driver`s view of the road cracked |3.2 |a| |ii|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired SEAL |6.2.2 |d| |ii|| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Side wing |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion Side wing |6.1.C.1| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn front bushe (5.3.4 (a) (i)) | 1 |
| Offside Rear Leaf spring shackle pin or bush excessively worn front bushe (5.3.4 (a) (i)) | 1 |
| Nearside Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch front and rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/ arch |2.4.A.3| | 1 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower ball joint cover |2.4.G.2| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower ball joint cover |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis top shock mount area |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis member |6.1.A.1| | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering to rear inner sill |6.1.A.1| | 1 |
| Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced lower rear suspension arm bush |2.4.F.2| | 1 |
| Central Rear Position lamp adversely affected by the operation of another lamp bad connection (4.2.3 (c)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Central Prop shaft joint excessively worn centre bearing (6.1.7 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear shackle mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top shock adsorber mouting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting x 2 |5.3.6 |a| |i|| | 1 |
| Rear Stop lamp not working n/s and o/s |1.2.1b| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill end |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis both sides near brake valve |3.3.A.2| | 1 |
| Nearside Rear Leaf spring fractured front eye broken |5.3.1 |b| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis x 2 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step as marked (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill as marked (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in yellow |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in yellow |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mounting point |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch front of arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch rear of arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch front of arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch rear of arch |2.4.A.3| | 1 |
| Loading door cannot be secured in the closed position sliding door |6.4.1| | 1 |
| Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Inner Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp bad earth |1.1.A.3f| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` dice on mirror |8.3.1e| | 1 |
| Fuel pipe leaking filler neck/breather hose area |7.2.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch, outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch, outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch, floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Wheel nut|s| missing spacer nut |4.2.A.1e| | 1 |
| Nearside Rear Upper Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Rear position lamp|s| not working both rear |1.1.A.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill by step |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear fog lamp emits a light other than red lense damaged/cracked |1.3.2e| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassis leg - above bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer chassis leg - above bump stop |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded `outrigger` |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger/leaf spring shackle mounting point |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear shackle mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear shackle mounting |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under rear of sill several places |5.2.6| | 1 |
| Offside Statutory seat belt of the wrong type. |5.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front spring eye |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis by cab |6.1.B.2| | 1 |
| Rear Direction indicator has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch to floor |2.4.A.3| | 1 |
| Stop lamp(s) light intensity significantly reduced BOTH. when side lights on, stop lights not showing (4.3.3 (a) (ii)) | 1 |
| Brake valve leaking LIMITER VALVE (1.1.7 (d) (i)) | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn REAR BUSH WORN (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING REAR MOUNTING AREA (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SPRING REAR MOUNTING AREA (5.3.6 (a) (i)) | 1 |
| Central passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
| Offside Direction indicator not working side repeater |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger |6.1.1 |c| |i|| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases flexi section |7.1.2| | 1 |
| Electrical wiring insecure in engine bay near the starter motor |1.9.2a| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp brighter than offside one |1.1.A.3f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis at spring hanger |2.4.A.3| | 1 |
| Drive shaft securing bolt loose bearing cover on engine block missing |6.1.7 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Anchor |5.3.6 |a| |i|| | 1 |
| Centre Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above spring shackle |6.1.B.2| | 1 |
| Central Exhaust has a major leak of exhaust gases box. |7.1.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush front bush. |2.4.B.2| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp Stop light tail light fog light and n/s indicator |1.1.A.3f| | 1 |
| Body has a sharp edge caused by corrosion both wings |6.1.C.1| | 1 |
| Power steering pipe|s| or hose|s| leaking joint with rack and as a result subframe is soaking. |2.3.3b| | 1 |
| Power steering pipe|s| or hose|s| leaking On rack corroded |2.3.3b| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` Phone holder |8.3.1b| | 1 |
| Fuel pipe leaking No` 3 injector leak of pipe |7.2.3| | 1 |
| Electrical wiring likely to touch hot or rotating parts engine bay area (4.11 (a) (iii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rust within 30cm of rear spring hangers (5.3.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 1 |
| Rear Brake valve leaking load valve leaking (1.1.7 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mounting (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases exhaust split in two |6.1.2 |a|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Rear Brake valve leaking load sensing valve (1.1.7 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis, front spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis, front spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis, rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis rear spring mount |2.4.A.3| | 1 |
| Rear Seat belt not functioning as intended seat centre belt missing (7.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2 X |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 X |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hold and corroded beside spring |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hold and corroded beside spring |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hold and corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hold and corroded beside engine mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis beside lower arm back bush |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing hold and corroded beside engine mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hold and corroded beside spring |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill hold and corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill hold and corroded |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis hold and corroded |6.1.B.2| | 1 |
| Offside Front Steering component mounting prescribed area is excessively damaged |2.1.2 |e| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded behind shocker |2.4.A.3| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced bulb or wiring fault |1.7.5a| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x 2 |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x 2 |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill areas |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner and outer sill areas |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner step area |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle (6.1.1 (c) (i)) | 1 |
| Offside Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Nearside Front Floor excessively deteriorated seat mountings |6.2.4 |a| |i|| | 1 |
| Nearside Front Fuel tank insecure tank strap corroded and broken |7.2.1| | 1 |
| Offside Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Offside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Direction indicator adversely affected by the operation of another lamp side markers (4.4.3 (b)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill to floor (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill to floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear hangers |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and rear hangers |2.4.A.3| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Steering system excessively tight rack fitted |2.2.D.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded by load sense valve mount |3.3.A.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger X2 |2.4.A.3| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings slid door sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side sill |6.1.B.2| | 1 |
| Nearside Front brake disc modified and seriously weakened and o/s/f |3.5.1n| | 1 |
| Offside Front Track rod end ball joint has excessive play as mark |2.2.B.1f| | 1 |
| Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Lower Tie bar/rod ball joint dust cover missing |2.4.G.2| | 1 |
| Nearside Lower Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Body component damaged and likely to cause injury Mirror casing damaged (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg at bulkhead excessivley corroded. (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar fractured Fractured at drop link (5.3.3 (b) (ii)) | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced Front radiator, intercooler support/subframe corroded. Likely to fail. (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch towards rear corroded/holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch towards rear corroded/holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill/step corroded/holed (6.1.1 (c) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit Exceeding plate limit of 1.19 at 3.18 average (8.2.2.2 (a)) | 1 |
| Central Front Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Central Front Fluid leaking continuously posing a serious risk to road safety Power steering fluid leak (8.4.1 (a) (ii)) | 1 |
| Central Rear Prop shaft joint excessively worn (6.1.7 (c) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mounting area corroded/holed (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mounting area corroded/holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded/holed along entire length (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded/holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg corroded/holed. Engine bay, at bulkhead. (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Nearside Front Brake disc significantly and obviously worn Significant corrosion to inner face |1.1.14 |a| |i|| | 1 |
| Offside Front Brake disc significantly and obviously worn Significant corrosion to inner face |1.1.14 |a| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured Front mounting eye, spring fractured. |5.3.1 |b| |ii|| | 1 |
| Nearside Front Outer Bumper insecure |6.1.4 |a| |i|| | 1 |
| Offside Front Outer Bumper insecure |6.1.4 |a| |i|| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded bonnet will not open so cant see items properly (1.1.21 (e) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear shackle mounts |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear spring mounts |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear outriggers. |2.4.A.3| | 1 |
| Centre Rear Brake hose leaking |3.6.A.1| | 1 |
| Nearside Front Lower Bonded suspension unit deteriorated and cannot function as intended rear bush deteriorated |2.4.F.3| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing corroded holes |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer chassis leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner chassis leaf spring mount next to handbrake mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded all around shock absorber mountain and cross section |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded next to shock absorber mounting and cross section |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch top mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch top mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch near chassis |2.4.A.3| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp earth fault (4.2.3 (c)) | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheelarch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced innerwheelarch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near rear spring hanger |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near spring hanger |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above fuel tank |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top Mount Underside |5.3.6 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated and Wheelarch |6.2.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm locating pin retaining device missing |2.4.G.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf spring shackle |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is severely distorted wheel arch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is inadequately repaired sill riveted and fiberglassed |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded under drivers seat |5.2.6| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded front inner arch within 30cm |3.6.C.3| | 1 |
| Centre Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis next to leaf spring |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/wheel arch x2 |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis/wheel arch |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis next to brake compensator |3.3.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill hole (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body corner near rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 holes (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under step patch not welded (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis in various places (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength upper chassis (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.32 (8.2.2.2 (a)) | 1 |
| Suspension spring mounting prescribed area is excessively corroded BOTH REAR CHASSIS MEMBERS |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor near shock absorber top fixing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded 2 areas marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch in 2 places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is severely distorted rear wishbone bush |2.4.A.3| | 1 |
| Offside Front Outline marker lamp not working cab roof light |4.2.1 |a| |ii|| | 1 |
| Nearside Front Outline marker lamp not working cab roof light |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel hub seal leaking,evidence on back plate |1.2.1 |a| |ii|| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings CORRODED AT FIXING MOUNTING POINTS |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch within 30cm of shock mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded within 30cm of o/s/r front mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded back panel holed within 30cm of spring mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced arch |6.1.1 |a| |i|| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect bulb incorrectly fitted |1.8.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount ....inner wheel arch |2.4.A.3| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp electrical fault |1.1.A.3f| | 1 |
| Offside Outer Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength inner step |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded front spring mount |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting This van is totally Rotten at every load bearing point |6.2.2 |d| |i|| | 1 |
| Outer Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Front Power steering component|s| leaking from a failed joint |2.3.3b| | 1 |
| Steering column universal joint is excessively deteriorated |2.1.5| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear spring |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded x3 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired shock |2.4.A.3| | 1 |
| Centre Rear Suspension component mounting prescribed area is excessively corroded inner quarter |2.4.A.3| | 1 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill to step |6.1.A.1| | 1 |
| Outer Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Windscreen wiper blade missing |3.4 |b| |ii|| | 1 |
| Nearside Rear Lower Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Front Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Exhaust system insecure all rubber hangers. |6.1.2 |a|| | 1 |
| Nearside Rear Leaf spring to axle fixing bolt insecure u bolts |5.3.1 |a| |i|| | 1 |
| Rear Prop shaft bearing excessively worn centre bearing |6.1.7 |b| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured B pillar around door latch |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured B pillar around door latch |5.2.6| | 1 |
| Fuel tank insecure front strap as snapped |7.2.1| | 1 |
| Offside Rear Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shockabsorber area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to outrigger |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step |wheelarch| |5.2.6| | 1 |
| Nearside Front Anti-roll bar has excessive play in a ball joint d bush |2.4.G.2| | 1 |
| Nearside Brake load sensing valve defective and function impaired |3.6.E.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most inner panel by towbar |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most panel by towbar |2.4.A.3| | 1 |
| Offside Front Brake pipe leaking Master Cylinder slight leak on pipe |3.6.A.1| | 1 |
| Nearside Front Wheel nut|s| loose 3 wheel nuts loose |4.2.A.1e| | 1 |
| Nearside Front Wheel nut|s| missing 1 wheel nut missing - stud sheared off |4.2.A.1e| | 1 |
| Offside Seat belt retracting mechanism defective seat belt twisted - not retracting correctly as intended |5.2.5b| | 1 |
| Central Prop shaft bearing housing insecure rubber support mounting breaking up (6.1.7 (f) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect lens deteriorated |4.1.2 |c|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan near drivers seat mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind road wheel (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind spring (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel x 3 places (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength doorstep (5.3.6 (a) (i)) | 1 |
| Offside Front suspension has excessive play in a upper wishbone bearing |2.5.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch within P/A shock upper mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch within upper mounting of shock absorber |2.4.A.3| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded outer sill. |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear x member |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear mounting bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wing and chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor/inner wing and chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front mounting area |2.4.A.3| | 1 |
| Nearside Front Obligatory mirror missing glass missing |3.3 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inside arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inside arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inside arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inside arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inside arch |2.4.A.3| | 1 |
| Offside Rear Wheel stud missing |4.2.1e| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint |2.3.1b| | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg at front cross member (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at fuel tank (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced passenger inner step (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced drivers inner step (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings passenger inner step |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded full step area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded full step area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shocker where floor meets inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near shocker where floor meets inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded swinging shackle mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear cross member near swinging shackle mount |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting rear cross member |6.6.6| | 1 |
| Centre Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of a towbar mounting rear cross member |6.6.6| | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp side light is brighter then stop lamp |1.2.1f| | 1 |
| Driver`s seat insecure Bolt insecure at rear of seat |6.2.A.1| | 1 |
| Front Upper Outline marker lamp not working Nearside and offside |4.2.1 |a|| | 1 |
| Offside Rear Inner Valve stem seriously damaged Adapter |5.2.3 |j|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values 6.45 (8.2.2.2 (f)) | 1 |
| Fuel system component leaking cyl 2 leak off excessively leaking (6.1.3 (b) (i)) | 1 |
| Rear Body insecure to the extent that stability is seriously impaired (6.2.2 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg heavily corroded |6.1.1 |c| |i|| | 1 |
| Rear Seat belt buckle missing seatbelts fitted in rear with no stock/buckle |7.1.2 |d|| | 1 |
| Stop lamp|s| not working h/level |4.3.1 |a| |ii|| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both chassis rail |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both chassis rail |6.2.2 |d| |i|| | 1 |
| Rear Suspension component missing bump stops |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In 2 places |5.3.6 |a| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor panel/step |6.1.B.2| | 1 |
| Central Lower Fuel tank insecure |6.1.3 |a| |i|| | 1 |
| Nearside Front Upper Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded back panel area |2.4.A.3| | 1 |
| Offside Front Brake pipe fouled by moving parts catching alternator pulley |3.6.B.2a| | 1 |
| Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Has hole caused by excessive corrosion |6.1.B.2| | 1 |
| Outline marker lamp not working All |4.2.1 |a|| | 1 |
| Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt and slight play (5.3.4 (b) (ii)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower seal |6.1.B.2| | 1 |
| Offside Rear Upper Hinged tailboard cannot be secured in the closed position |6.4.1| | 1 |
| Bonnet retaining device ineffective bonnet does not open |8.4.2| | 1 |
| Offside Obligatory mirror does not provide a view to the rear mirror glass missing (3.3 (c)) | 1 |
| Fuel cap/sealing device missing no fuel cap (6.1.3 (b) (i)) | 1 |
| Nearside Rear Lower Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Offside Rear Lower Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Offside Rear Body panel likely to become detached |6.2.1 |a| |ii|| | 1 |
| Nearside Rear Body panel likely to become detached |6.2.1 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sills holed o/s |7.1.1 |a| |i|| | 1 |
| Offside Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x4 (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering suspension tower |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in engine bay |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near load sensing valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre brace |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above front subframe |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above subframe |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Front suspension has excessive movement at a wishbone pin or bush offside |2.5.A.1c| | 1 |
| Steering column shaft has excessive end float offside |2.1.3| | 1 |
| Centre Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion side panel |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded AT STEP SILL |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded AT REAR SPRING HANGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded AT REAR INNER WING |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded suspension mount |2.4.A.3| | 1 |
| Nearside Rear Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill |6.1.1 |c| |i|| | 1 |
| Nearside Cab steps in such a condition that it is likely to cause injury outer sill corroded (6.2.8 (b)) | 1 |
| Central Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor and chassis member (7.1.1 (a) (i)) | 1 |
| Offside Rear Braking system leaking fluid dripping off back plate |3.6.A.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis under osr rear floor |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of inner wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 1 |
| Nearside Front Tie bar/rod locating pin retaining device missing |2.4.G.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside chassis leg marked yellow sub frame mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area chassis leg marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area chassis leg marked yellow |5.3.6 |a| |i|| | 1 |
| Rear Towbar is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached cross member |6.1.6 |i| |ii|| | 1 |
| Offside Rear Leaf spring anchor pin not correctly positioned |2.4.B.3a| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner sill/door step |2.4.A.3| | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired step not fully welded (6.2.2 (d) (ii)) | 1 |
| Central Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Nearside Front Body panel damaged and likely to cause injury WING (6.2.1 (a) (i)) | 1 |
| Centre Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Offside Rear Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` items on dash |8.3.1e| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` items on dash |8.3.1b| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing within 30cm of machpearson mounting |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded x / member |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded spring hanger |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit 1.85 mean recorded , manufacturers plate limit is 0.68 |8.2.2.2 |a|| | 1 |
| Fuel cap/sealing device ineffective wont secure |6.1.3 |b| |i|| | 1 |
| Nearside Rear Shock absorbers insecurely attached upper bolt loose |5.3.2 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner 1/4 pannel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger X2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger X2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill box section |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail in wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded above front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outter sill origanal patch coming away |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring anchor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded 2X places |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded anti roll bar link |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded anti roll bar link |2.4.A.3| | 1 |
| Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Outer Rear Towbar component excessively corroded |6.6.1| | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner sill corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner sill corroded (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear inner sill corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner wing (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front inner wing corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting rear spring mount corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement inner rear bush |2.4.G.2| | 1 |
| Nearside Headlamp not working on dipped beam unable to check aim (4.1.1 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine bay chassis top section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded valance centre section |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis box section behind door step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear inner wheel arch marked yellow |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded load bay |2.4.A.3| | 1 |
| engine mounting deteriorated resulting in excessive movement sub frame to engine |6.1.D.1a| | 1 |
| Steering pivot point has excessive play lower bearing |2.2.B.1g| | 1 |
| Body has a sharp edge caused by corrosion Offside and nearside front wings |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion Nearside body |6.1.C.1| | 1 |
| Nearside Rear Anti-roll bar linkage insecure and offside rear |2.4.G.1| | 1 |
| Nearside Body component corroded and likely to cause injury and Offside side boards |6.2.1 |a| |i|| | 1 |
| Nearside Track rod end ball joint has excessive play and Offside |2.1.3 |b| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Silencer box |6.1.2 |a|| | 1 |
| Prop shaft bearing housing likely to fail front centre bearing |6.1.7 |f| |ii|| | 1 |
| Nearside Rear Leaf spring anchor bracket insecure to the extent that relative movement is visible and Offside rear, front bolts |5.3.1 |a| |ii|| | 1 |
| Front Position lamp switch faulty |1.1.A.1| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner and outer sill panel |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at shock absorber area |6.1.B.2| | 1 |
| Front engine mounting bracket damaged and likely to fail cross-member |6.1.D.1b| | 1 |
| Rear Fuel tank insecure strap exsessive corrosion |7.2.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear box section area x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section area x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole near offside rear leaf spring mount! (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside sill, previous weld repair has corroded through! (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole inner wheel arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion hole by leaf springs front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion hole by leaf springs rear mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corrosion hole by leaf springs rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion hole at front of inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis split open where wheel arch joins the floor cause by corrosion!!! (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis split open where wheel arch joins the floor cause by corrosion!!! (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Multiple corrosion holes inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt Split open (2.1.3 (g) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted rear most out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel box |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel box |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail/fuel tank mount |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / chassis behind wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / chassis behind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill behind wheel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded out rigger / chassis in front of rear wheel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill in front of rear wheel |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded arch in several places |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded arch in several places |2.4.A.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill and step |5.2.6| | 1 |
| Centre Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Stop lamp|s| showing white light to the rear lens damage |4.3.3 |a| |ii|| | 1 |
| Offside Rear Position lamp showing white light to the rear lens damage |4.2.3 |a| |ii|| | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn both side |5.3.4 |a| |i|| | 1 |
| Offside Rear Outer Anti-roll bar severely distorted linkage hole is elongated |2.4.G.1| | 1 |
| Offside Rear Vehicle structure has a modification which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering inner sill |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner step in 3 places |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross member before rear axle |2.4.A.3| | 1 |
| Nearside Rear Leaf spring cracked Front spring eye |2.4.B.1a| | 1 |
| Nearside Front Lower Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bush Rear D bushes |2.4.G.2| | 1 |
| Rear Lower Anti-roll bar linkage has excessive play in a pin/bush both |2.4.G.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Central Front Body insecure and dangerous to other road users bumper |6.1.B.1b| | 1 |
| Offside Rear Body has a sharp edge caused by damage bumper corner missing |6.1.C.1| | 1 |
| Nearside Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Fuel system component leaking around injector area |7.2.3| | 1 |
| Front engine mounting deteriorated resulting in excessive movement cross member |6.1.D.1a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Foremost |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Foremost |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rearmost |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rearmost |2.4.G.2| | 1 |
| Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
| Centre Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Rear Service brake excessively fluctuating x2 (1.2.1 (e)) | 1 |
| Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step/floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/suspension (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis/under bonnet (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded marked in yellow (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked in yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt buckle damaged (7.1.2 (d)) | 1 |
| Offside Front Drivers view of an obligatory external mirror materially affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Outer Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1) | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger @ leaf spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Rear Prop shaft joint excessively worn uj @ rear differential (6.1.7 (c) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear of spring |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded step & inner sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front inner & outer sill |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced footsteps |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced footsteps |7.1.1 |a| |i|| | 1 |
| Front Front passenger seat insecure |6.2.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/ turret area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring eye |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill in front of spring eye |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded lower step and inner side |5.2.6| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded under inner wing |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded in many areas under wing |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded w/ arch |2.4.A.3| | 1 |
| Nearside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt rack boot insecure |2.1.3 |g| |ii|| | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt rack boot insecure |2.1.3 |g| |ii|| | 1 |
| Offside Rear Seat belt anchorage loose no bolt fitted (7.1.1 (b)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced step to sill backing excessively corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear bush split (5.3.4 (a) (i)) | 1 |
| Offside Front Track rod end ball joint has excessive play dust cover also split |2.2.B.1f| | 1 |
| Nearside Body has a sharp edge caused by corrosion and off side tipper body |6.1.C.1| | 1 |
| Offside Rear Rear position lamp|s| not working lamp broken |1.1.A.3b| | 1 |
| Offside Front Coil spring mounting loose |2.4.C.3a| | 1 |
| Fuel tank insecure securing strap rotten |6.1.3 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired loose/insecure (1.1.17 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing and floor |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill (6.2.2 (d) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill (6.2.2 (d) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under sill (6.2.2 (d) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under sill (6.2.2 (d) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 1 |
| Fuel tank insecure Mounting Strap Missing |7.2.1| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/body |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of wheel arch |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings of wheel arch |6.1.B.2| | 1 |
| Offside Rear Upper Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Offside Rear Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion STEP |6.1.C.1| | 1 |
| Offside Front Upper Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush Rear bush |2.5.A.1c| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both side inner sill |2.4.A.3| | 1 |
| Nearside Front Side repeater does not face the side |1.4.A.2b| | 1 |
| Rear Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis member next to fuel tank (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill Flange (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill Flange (5.3.6 (a) (i)) | 1 |
| Central Exhaust system insecure clamp broken (6.1.2 (a)) | 1 |
| Offside Rear Exhaust system insecure exhaust mount missing (6.1.2 (a)) | 1 |
| Central Exhaust silencer insecure silencer shield insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Body component likely to become detached side step tread board |6.2.1 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Rear Towbar component excessively corroded out riggers marked yellow (6.1.6 (a)) | 1 |
| Offside Rear Towbar component excessively corroded out riggers corroded marked yellow (6.1.6 (a)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch marked yellow rear (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch marked yellow (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step marked yellow (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers seat area floor holed |5.2.6| | 1 |
| Nearside Rear Leaf spring fractured front eye broken |2.4.B.1a| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear box across vehicle under bumper holed, nearside chassis box above axle excessively corroded. |2.4.A.3| | 1 |
| Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting box section across vehicle |6.6.6| | 1 |
| Offside Front Fluid leak harmful to the environment or a risk to other road users fuel leak near injector pump (8.4.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear leaf spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear bush |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring |5.3.6 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill 3 holes all marked in white chalk paint (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch has large hole marked in white (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis cross member has large hole marked in white (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole by shock absober mounting marked in white (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced by rear leaf spring mount marked in white (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of arch on chassis cross member old repair unsatisfactory (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole by rear shock absorber mounting marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole by compensator valve marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of the rear arch marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of rear arch marked in white outer (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner front of rear arch marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of rear arch has hole marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of rear arch has a hole marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill has a hole marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill has a hole marked in white (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower shock mount |2.4.A.3| | 1 |
| Rear Fuel tank insecure fuel tank strap fractured |7.2.1| | 1 |
| Speedometer clearly inoperative reading engine revs not miles |6.7.2| | 1 |
| Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear chassis |6.1.B.2| | 1 |
| Brake pipe inadequately clipped rear of engine bay |3.6.B.1| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired doorsill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired door sill |5.2.6| | 1 |
| Centre Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded rear quarter panel |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded rear quarter panel |2.4.A.3| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both "d" bushes |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush droplink |2.4.G.2| | 1 |
| Offside Outer Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Offside Outer Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength step |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area front |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area front |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area rear |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering suspension |6.1.1 |c| |ii|| | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering suspension |6.1.1 |c| |ii|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel inner arch |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle outrigger |6.1.B.2| | 1 |
| Nearside Front Lower Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 1 |
| Front position lamp|s| adversely affected by the operation of another lamp o/s and n/s |1.1.A.3f| | 1 |
| Seat belt anchorage prescribed area is excessively corroded NSF + OSF inner sill / OSF step / NSR + OSR door shuts as chalked |5.2.6| | 1 |
| Fuel tank insecure Front fuel tank strap |7.2.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering next to engine mount |6.1.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to shocker |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body |6.1.B.2| | 1 |
| Nearside Rear Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
| Rear Brake pipe inappropriately repaired |3.6.A.3| | 1 |
| Offside Rear position lamp|s| incorrect colour lens holed & showing white light |1.1.A.3e| | 1 |
| Stop lamp not working Also Lens Holed |1.2.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings gearbox mount |6.1.B.2| | 1 |
| Nearside Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Position lamp not working and nearside front |4.2.1 |a| |ii|| | 1 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.2.3a| | 1 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.2.3a| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded rear of cab / crossmember area in several places on near side and above propshaft |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of off side rear chassis rail near shock top mount (5.3.6 (a) (i)) | 1 |
| Anti-roll bar linkage insecurely attached both rear lower mounts (5.3.3 (a) (i)) | 1 |
| Body mounting fixings missing numerous body mounting bolts missing (6.2.2 (c) (i)) | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid rear compensator leaking (1.1.16 (b) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror cover broken (6.2.1 (a) (i)) | 1 |
| Offside Front Body component damaged and likely to cause injury mirror cover broken (6.2.1 (a) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction items on mirror (3.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced in door shut (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired strut top (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor and step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured at front eye (5.3.1 (b) (i)) | 1 |
| Electrical wiring likely to touch hot or rotating parts under bonnet and in o/s/f door shut (4.11 (a) (iii)) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement O/S & N/S `D` Bushes |2.4.G.2| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement O/S & N/S `D` Bushes |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing Bolt missing |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded back of cab |5.2.6| | 1 |
| Nearside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step inner sill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by shock absorber to mount |2.4.A.3| | 1 |
| Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded by load valve |3.3.A.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner doorstep |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer doorstep/sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/doorstep |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/doorstep |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front most spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear most spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/body mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/floorpan |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |at top| |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Body has a projection caused by corrosion chassis leg holed |6.1.C.1| | 1 |
| Nearside Rear Body component insecure retaining devise misssing |6.2.1 |a| |i|| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected fouling throttle linkage |1.1.2 |b| |ii|| | 1 |
| Offside Outline marker lamp missing Roof light (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working Roof light (4.2.1 (a) (ii)) | 1 |
| Rear Body component corroded and likely to cause injury both drop sides (6.2.1 (a) (i)) | 1 |
| Offside Front Body has a sharp edge caused by damage door mirror back broken causing sharp edges |6.1.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded In chassis near rear wishbone bush |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded In chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded On chassis in front cross member |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded top of previous weld come away from chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded to rear of top shocker mount |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded 2 places on outer chassis in wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor/top of step |5.2.6| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top/ inner wheel arch. (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step 3 x places |5.2.6| | 1 |
| Electrical wiring damaged, likely to cause a short fouling handbrake cable and exhaust |1.9.2b| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wing corroded and holed |6.2.2 |d| |ii|| | 1 |
| Mechanical brake component locking device insecure |3.5.1l| | 1 |
| Glazing/screen/partition cracked or damaged which presents a danger to any person on the vehicle. windscreen |6.9.3| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis crossmembers |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmembers, outriggers, chassis |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmembers, outriggers, chassis |6.1.1 |c| |i|| | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember |6.1.1 |c| |i|| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion holed |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis behind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Seat belt flexible stalk excessively deteriorated |5.1.B.5a| | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Front Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front position lamp|s| not working marker light |1.1.A.3b| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed before & after axle |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed before & after axle |6.1.B.2| | 1 |
| Nearside Rear Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear wheel bearing has excessive play end float |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play end float |2.6.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired outer sill |not seem welding throughout| |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch towards strut mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded valance/closing panel |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor/step area |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| leaking pipes into steering rack |2.3.3b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner Wing |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner Arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner Arch |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner Sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner Wing |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis within 30cm of damper mounting |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis within 30cm of leaf spring hangers in 2 places |5.3.6 |a| |ii|| | 1 |
| Front passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded central outrigger multiple places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded central outrigger multiple places |2.4.A.3| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in several places upper and lower |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in several places upper and lower |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength coutrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear chassis legs |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/out rigger |2.4.A.3| | 1 |
| Emissions not tested oil light flickering. (8.2.2.2 (e)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/door step (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill/door step (7.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel apron (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel apron (6.2.2 (d) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet |5.3.6 |a| |i|| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength centre outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Exhaust silencer insecure exhaust skin back box (8.1.1 (b) (i)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill in multiple places marked (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower arch floor |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower arch floor |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Centre Front Front drive shaft coupling bearing fastener fractured |2.5.C.2b| | 1 |
| Centre Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Inner Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger and floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger and rear valance (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting valance and sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch and floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill repair inadequate welding (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outrigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chases near side to foo side (6.1.1 (c) (i)) | 1 |
| Offside Front Track rod end modification unsafe (2.1.3 (f) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength numerous areas chalked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near shock absorber mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Horn not working |1.6.2a| | 1 |
| Nearside Front Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement of rear |2.4.B.2| | 1 |
| Offside Front Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement of rear |2.4.B.2| | 1 |
| Nearside Rear Leaf spring anchor bracket nut missing |2.4.B.6c| | 1 |
| Nearside Direction indicators missing |1.4.A.2b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Out rigger |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill step |X2| |6.1.1 |c| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded visible from underneath |2.4.A.3| | 1 |
| Nearside Front Outline marker lamp not working roof l;amp |4.2.1 |a|| | 1 |
| Nearside Rear Outline marker lamp not working roof lamp |4.2.1 |a|| | 1 |
| Offside Rear Outline marker lamp not working roof lamp |4.2.1 |a|| | 1 |
| Offside Outer Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.3| | 1 |
| Offside Steering rack gaiter split |2.2.D.1d| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH REAR TOP SECTIONS |6.1.B.2| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis above subframe mounting |5.3.6 |a| |i|| | 1 |
| Rear Seat belt buckle not functioning as intended All, not accessible |7.1.2 |d|| | 1 |
| Bonnet retaining device excessively deteriorated can not be opened with ignition key provided |8.4.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger panel |2.4.A.3| | 1 |
| Position lamp light intensity significantly reduced flashing with indicator |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mount. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer sill (5.3.6 (a) (i)) | 1 |
| Power steering pipe|s| or hose|s| excessively damaged pipe to rack |2.3.2| | 1 |
| Offside Front Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded both front and rear of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded both front and rear of spring |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch in two places |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in four places |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in two places |5.3.6 |a| |i|| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture under bonnet |1.1.11 |a|| | 1 |
| Nearside Retractable step not operating correctly |6.1.E.2| | 1 |
| Centre Seat belt locking mechanism does not secure or release 3rd row |5.2.5a| | 1 |
| Rear Outer Seat belt locking mechanism does not secure or release 2nd row |5.2.5a| | 1 |
| Offside Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Centre Front Lower Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded within 30cm of near side rear shackle mounting point |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear out riggers and rear inner arches |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Fluid suspension unit fouled by moving parts likely to cause damage |2.4.D.1c| | 1 |
| Offside Rear Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
| Lower Steering column flexible coupling insecure |2.1.5| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded valance/outrigger |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded innar sill/outrigger |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch front and rear of wheel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch front and rear of wheel |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis and inner wing |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill/arch |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Suspension component pin or bush excessively worn wishbone bush split (5.3.4 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor within 30 cm of seat mounts |6.1.B.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f inner wheel arch, rear chassis, rear body, n/s inner sill, o/s inner sill, all corrosion yellow chalked |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step/sill 30 cm sub frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step/sill 30 cm sub frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill 30cm suspension mount (5.3.6 (a) (i)) | 1 |
| Central Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength All to body mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Exhaust emissions exceed manufacturers specified limit Limit = 1.19 (8.2.2.2 (a)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cm of shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30cm from shock absorber mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill 30 cm from spring hanger (5.3.6 (a) (i)) | 1 |
| Central Prop shaft bearing excessively worn Propshaft bearing (6.1.7 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring shackle mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring shackle mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/under sill and step under neath |5.2.6| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp all amps in unit (4.2.3 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill /chassis / inner wheel arch and out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember within rear spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill within spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis within load valve mounting (1.1.21 (e) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cab step/inner wheel arch within subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front brake caliper securing device loose top bolt loose |3.5.1j| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mount |2.4.A.3| | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened shackle corroded |2.4.B.6d| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened shackle corroded |2.4.B.6d| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded rear x member |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner flitch |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill jagged edge |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to chassis |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to chassis |6.1.B.2| | 1 |
| Offside Rear Bonded suspension unit attachment damaged and seriously weakened |2.4.F.1c| | 1 |
| Offside Front Track rod end inappropriately modified fitted incorrectly |2.2.C.1e| | 1 |
| Brake hose inappropriately repaired insecure |3.6.A.3| | 1 |
| Offside Headlamp aim beam image obviously incorrect bulb fitted incorrectly |1.8.A.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting point pa |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting point pa |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Front Anti-roll bar linkage modified and seriously weakened |2.4.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. within 30cm of seat mount |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. within 30cm of seat mount |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer chassis by shock absorber |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing / chassis |2.4.A.3| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing panel (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger / inner sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch / floor pan holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch holed (5.3.6 (a) (i)) | 1 |
| Rear fog lamp switch not operating in accordance with the requirements Tell tale light inoperative (4.5.3 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/ wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch & floor |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorsteop and inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill by front spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected rear spring mount |5.3.6 |a| |ii|| | 1 |
| Nearside Front Service brake grabbing severely |3.7.C.2| | 1 |
| Offside Rear Upper Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis over rear axle |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis over rear axle |6.1.B.2| | 1 |
| Nearside Front Sub-frame has excessive play in a pin/bush rear bush |2.4.G.2| | 1 |
| Offside Front Sub-frame has excessive play in a pin/bush rear bush |2.4.G.2| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside and nearside rear |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 1 |
| Front Suspension arm pin or bush excessively worn both sides rear bushes |5.3.4 |a| |i|| | 1 |
| Headlamp aim projected beam image is obviously incorrect both sides |4.1.2 |c|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger by spring hanger |6.1.B.2| | 1 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis under step |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of rear spring mount |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by damage door mirror cover missing |6.1.C.1| | 1 |
| Nearside Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner panel front of rear wheel |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner corner panel front on rear wheel |2.4.A.3| | 1 |
| Offside Rear Lower Leaf spring has excessive wear in a shackle pin and/or bush spring eye |2.4.B.2| | 1 |
| Steering arm damaged and unserviceable n/s rack end |2.2.C.1d| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o.s drivers step |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear xmember |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by rear off rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by rear off rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded by front off rear spring |2.4.A.3| | 1 |
| Front Radius arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Rear Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner & outer sills |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner behind rear wheel |6.1.B.2| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Central Prop shaft bearing excessively worn mounting (6.1.7 (b) (i)) | 1 |
| Nearside Upper Outline marker lamp not working |4.2.1 |a|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s step area holed |6.1.1 |c| |i|| | 1 |
| passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Windscreen in an unacceptable condition Passenger area (3.2 (c) (i)) | 1 |
| Offside Front Upper Front position lamp|s| not working roof marker light |1.1.A.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill of cab |5.2.6| | 1 |
| Offside Front All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sills and inner step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sills and inner step |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing turret area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sil |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking into rack |2.3.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner Cill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring shackle, box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring eye, box section (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring shackle, box section (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded body |2.4.A.3| | 1 |
| front brake recording little or no effort both sides |3.7.B.5a| | 1 |
| Emissions not tested obvious black smoke (8.2.2.2 (e)) | 1 |
| Nearside Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Body has a sharp edge caused by damage mirror head broken |6.1.C.1| | 1 |
| Rear position lamp|s| incorrect colour o/s and n/s side lights lighting up reverse lights |1.1.A.3e| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement o/s and n/s |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both sills front to rear, both rear chassis legs, n/s/r inner arch, both front inner wheel arch/strut top areas |2.4.A.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion rear side door |6.1.C.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill area plate not continuously welded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear of spring (5.3.6 (a) (i)) | 1 |
| Offside Obligatory indirect vision device insecure |3.3 |b| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount chassis rail |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger, spring mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger, spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor, shock absorber mount |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor, seat mount |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded doorstep x2 |5.2.6| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Tipper side |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Tipper side |6.1.C.1| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel well |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 8.4 |7.4.B.3b| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` items on dash blocking view |8.3.1e| | 1 |
| Nearside Rear position lamp|s| incorrect colour rear lamp lens broken showing white light |1.1.A.3e| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shock top mounting, to wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shock top mounting to wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded front outer |5.2.6| | 1 |
| Oil leaking excessively from engine Oil filter/ oil cooler area |8.4.1 |a| |i|| | 1 |
| Exhaust system insecure Rear section |6.1.2 |a|| | 1 |
| Offside Body component damaged and likely to cause injury door mirror |6.2.1 |a| |i|| | 1 |
| Power steering component leaking rack / pipe leaking (2.1.5 (a)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn front arm rear bush (5.3.4 (a) (i)) | 1 |
| Rear Service brake effort inadequate at a wheel o/s & n/s (1.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wheel arch (6.2.2 (d) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 front and rear of cross member (6.1.1 (c) (i)) | 1 |
| Nearside Front Upper Coil spring mounting corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury Outer sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg three places |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg three places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front of rear wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front of rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis behind rear wheel |2.4.A.3| | 1 |
| Central Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (front of engine) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (front of engine) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hangger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s + n/s/r chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s + n/s/r inner wheel arches |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded everywhere |2.4.A.3| | 1 |
| Front Inner Suspension component mounting prescribed area is excessively corroded arches both sides |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r + n/s/r chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r + n/s/r inner wheel arches |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s + n/s/f inner wheel arches |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing box section |2.4.A.3| | 1 |
| Prop shaft bearing housing likely to fail Rubber mounts on both bearings |6.1.7 |f| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear leaf spring area, marked in red |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, marked in red |5.3.6 |a| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk |6.1.1 |c| |i|| | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger & Spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Spring hanger / inner sill / rear cross member |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Rear cross member / chassis rail |2.4.A.3| | 1 |
| Towbar component insecure 2 bolts missing |6.6.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill behind bumper |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Rear of wheel arch / floor |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Foot step / inner sill area |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Bulkhead / chassis above front subframe . Area marked |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg under arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired shock |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired shock |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded chassy as marked |3.3.A.2| | 1 |
| Nearside Front Macpherson strut insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded o/s n/s front to rear outter sill |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength front to rear outter sill |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded o/s n/s front to rear inner sill |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded o/s n/s front to rear inner sill |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded o/s n/s top strut mounts |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded o/s n/s front inner wheel archs |2.4.A.3| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded inner and outter step |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner and outter step |2.4.A.3| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded valance |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s n/s outriggers |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s n/s rear chassy split |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded o/s n/s rear in side wheel archs |2.4.A.3| | 1 |
| Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Offside Front Leaf spring main leaf fractured eye bush (5.3.1 (b) (ii)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer step |5.2.6| | 1 |
| Offside Rear Body has a projection caused by corrosion Tipper body X2 Points of corrosion |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion Tipper body, X2 Points of corrosion |6.1.C.1| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm of spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed within 30cm of spring hanger (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis holed next to fuel tank within 30cm of seat mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner of chassis/bulk head holed within 30cm of subframe mounting (6.2.2 (d) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed front to rear |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed front to rear |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed |6.1.1 |c| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated inner arch to floor |6.2.4 |a| |i|| | 1 |
| Offside Rear Floor excessively deteriorated inner arch to floor |6.2.4 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch inner front |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Offside Front Sub-frame strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting multiple holes |6.2.2 |d| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated floor holed |6.2.4 |a| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind bumper |6.2.2 |d| |i|| | 1 |
| Nearside Body has a sharp edge caused by corrosion tipper body |6.1.C.1| | 1 |
| Suspension arm pin or bush excessively worn nsf lower suspension arm rear bush badly worn |5.3.4 |a| |i|| | 1 |
| Brake pipe leaking on a hydraulic braking system front to rear brake pipe leaking |1.1.11 |b| |ii|| | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks on towbar socket |4.11 |c| |iii|| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced rear crossmember behind rear axil (6.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement bushes on bar |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Rear to front complete inner sill X 8 |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is severely distorted Rear to front complete inner sill X 4 |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded Inner sill/ arch area by leaf spring eye bush |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded Inner sill/ Lower arch area by leaf spring eye area |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Rear to front outersill complete. X 4 |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded inner arch area |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded inner arch chassis area |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is severely distorted inner arch area |2.4.A.3| | 1 |
| Inner Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Rear fog lamp not working rear |1.3.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded near shocker |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near shocker |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Central Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Torque/reaction arm fractured |2.4.G.1| | 1 |
| Rear Brake pedal actuating cable wires broken and cable significantly weakened |3.3.A.1f| | 1 |
| Nearside Front Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mount, chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases Silencers (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail / inner wing area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail under engine |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring anchor mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring shackle mount |2.4.A.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill & inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill & inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced upper chassis at engine mount |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger / outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger / outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x2 (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit plate limit 1.22 (8.2.2.2 (a)) | 1 |
| Offside Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Inner Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Inner Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Fuel cap/sealing device ineffective temp cap fitted (6.1.3 (b) (i)) | 1 |
| Offside Front Lower Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Offside Rear Tie bar/rod locating pin retaining device missing locking nut |2.4.G.3b| | 1 |
| Nearside Rear Leaf spring anchor bracket fractured eye bush support |2.4.B.6b| | 1 |
| Centre Front drive shaft coupling flexible rubber or fabric coupling softened by oil contamination |2.5.C.1e| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded chassis by load sensing valve |1.1.21 |e| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassis by strut |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under the bonnet close to gearbox mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake prescribed area is excessively corroded chassis in inner wheel arch |1.1.21 |e| |i|| | 1 |
| Braking system leaking nsf brake line |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye bracket and surrounding area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring eye bracket and surrounding area |2.4.A.3| | 1 |
| Nearside Body component corroded and likely to cause injury front wing arch and body sill (6.2.1 (a) (i)) | 1 |
| Offside Body component corroded and likely to cause injury front and rear wing arches (6.2.1 (a) (i)) | 1 |
| Supplementary Restraint System warning lamp indicates a fault Air bag light flashing |5.4.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Two locations on the chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill two locations |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer and inner sill |6.1.B.2| | 1 |
| Offside Front Suspension arm worn and seriously weakened rubber bush at the rear |2.4.G.1| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting N/S ARCH |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting ARCH |6.2.2 |d| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour lens damaged |4.4.3 |a|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced b/post (7.1.1 (a) (i)) | 1 |
| Front Upper Outline marker lamp not working both roof mounted (4.2.1 (a) (ii)) | 1 |
| Brake cable damaged front broken (1.1.15 (a)) | 1 |
| Nearside Rear Anti-roll bar linkage insecure brorken |2.4.G.1| | 1 |
| Offside Rear Brake hose excessively damaged hose (1.1.12 (b) (ii)) | 1 |
| Fuel system component leaking excessively or a risk of fire around injectors (6.1.3 (b) (ii)) | 1 |
| Nearside Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Sub-frame attachment bracket/mounting insecure rear bolts loose |2.4.G.1| | 1 |
| Nearside Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill to chassis |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour lense damaged |1.4.A.2f| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill x3 holes |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill front to rear holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded by shackle mount |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch x2 holes |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch x3 holes |2.4.A.3| | 1 |
| Nearside Rear Lower Bonded suspension unit attachment fractured |2.4.F.1b| | 1 |
| Offside Front Lower Suspension spring mounting prescribed area is inadequately repaired step (5.3.6 (a) (i)) | 1 |
| Nearside Lower Body has a sharp edge caused by corrosion sill |6.1.C.1| | 1 |
| Nearside Front Inner Anti-roll bar has excessive play in a pin/bush d |2.4.G.2| | 1 |
| Offside Front Inner Anti-roll bar has excessive play in a pin/bush d |2.4.G.2| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (centre) (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (top of) (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat frame |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Braking system leaking metal brake pipe |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch front and rear sections |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear sections |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is severely distorted rear shocker mount |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed and corroded (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills holed and corroded (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step holed and corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn front wishbone rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn front wishbone rear bush (5.3.4 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed and corroded (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure fuel tank strap corroded and holed (6.1.3 (a) (i)) | 1 |
| Headlamp adversely affected by the operation of another lamp both front |1.7.5c| | 1 |
| Stop lamp adversely affected by the operation of another lamp both rear |1.2.1f| | 1 |
| Nearside Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Offside Front Lower Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Rear Lower Towbar attachment insecure Toe ball (6.1.6 (c) (i)) | 1 |
| Nearside Rear Brake fluid contaminated drum (leak) (1.8 (a)) | 1 |
| Nearside Front Outer Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt loose (2.1.3 (g) (ii)) | 1 |
| Nearside Front Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported exhaust rubber broken |7.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Engine bay area (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill x2 (7.1.1 (a) (i)) | 1 |
| Offside Obligatory mirror insecure does not latch (3.3 (b) (ii)) | 1 |
| Central Prop shaft bearing excessively worn both bearings (6.1.7 (b) (i)) | 1 |
| Offside Front Upper Outline marker lamp missing |4.2.1 |a|| | 1 |
| Nearside Obligatory indirect vision device does not provide a view to the rear |3.3 |c|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab corroded marked with yellow |7.1.1 |a| |i|| | 1 |
| Offside Front Front position lamp|s| does not face the front |1.1.A.3a| | 1 |
| Offside Headlamp aim beam image too far to the left |1.6.4| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEELARCH |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEELARCH |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER WHEELARCH |6.1.B.2| | 1 |
| Nearside Rear Braking system leaking from LSV to brake hose |3.6.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near bump stop |6.1.A.1| | 1 |
| Rear Service brake grabbing severely |3.7.C.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside inner and outer sill |5.2.6| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting in wheel arch |2.4.A.3| | 1 |
| Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s and o/s inner sill |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 1 |
| Front Anti-roll bar has excessive play in a pin/bush both front D bushes |2.4.G.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out riggers |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 1 |
| Offside Front Brake prescribed area is excessively corroded Flexi hose mounting |1.1.21 |e| |i|| | 1 |
| Nearside Front Brake prescribed area is excessively corroded Flexi hose mounting |1.1.21 |e| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and our sill area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill area and rear end of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x 2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis front spring |2.4.A.3| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis/cross member |3.1.9| | 1 |
| Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis x3 |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis by spring hanger |6.1.B.2| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch/inner wing |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/cross member x 3 |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under arch/step/inner wing |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength outrigger chassis split |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis plate not welded to chassis/not seam welded |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis not welded to chassis/not seam welded |5.3.6 |a| |i|| | 1 |
| Rear Brake load sensing valve linkage defective and function impaired arm corroded/broken |1.1.17 |a|| | 1 |
| Body panel damaged and likely to cause injury front panel |6.2.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired under bonnet |5.3.6 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired snapped |1.1.17 |a|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind cab |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting multiple points |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting multiple points |6.2.2 |d| |i|| | 1 |
| Rear Seat belt retracting mechanism defective both |7.1.2 |e|| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel on engine |8.4.1 |a| |i|| | 1 |
| Nearside Outer Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Nearside Seat belt flexible stalk excessively deteriorated |5.1.B.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at front spring mount |2.4.A.3| | 1 |
| Nearside Body has a projection caused by corrosion of body |6.1.C.1| | 1 |
| Offside Body has a projection caused by corrosion of body |6.1.C.1| | 1 |
| Nearside Rear Body has a projection caused by corrosion of body |6.1.C.1| | 1 |
| Nearside Rear Leaf spring shackle bracket inappropriately repaired and o/s/r |2.4.A.2| | 1 |
| Nearside Rear Leaf spring shackle bracket loose and o/s/r bolts loose |2.4.B.6a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step/floor area |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch front on chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch chassis and floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch front chassis and floor (5.3.6 (a) (i)) | 1 |
| Central Rear Upper Prop shaft bearing likely to break up center bearing defective (6.1.7 (b) (ii)) | 1 |
| Offside Front Power steering pipe/hose leaking rack and pinion leaking fluid (2.1.5 (a)) | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush both side d bushes |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body cross members missing & both side chock rails cracked/corroded to excess |6.1.B.2| | 1 |
| Rear position lamp|s| insecure lighting bar bolts loose |1.1.A.3a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger box section (5.3.6 (a) (i)) | 1 |
| Rear Bootlid cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis bump stop mounting point |6.1.B.2| | 1 |
| Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger |6.1.B.2| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre sill |5.3.6 |a| |i|| | 1 |
| Brake performance not tested |3.8| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Rear Rear fog lamp adversely affected by the operation of another lamp |1.1.6f| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.4d| | 1 |
| Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 1 |
| Nearside Rear Leaf spring fractured snapped (5.3.1 (b) (i)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced side loading door step floor (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill not welded (7.1.1 (a) (i)) | 1 |
| Nearside Track rod end seriously misaligned loose (2.1.3 (e)) | 1 |
| Nearside Rear Hydraulic fluid leaking excessively wheel pos brake fluid (8.4.1 (a) (i)) | 1 |
| Offside Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
| Leaf spring shackle pin not correctly positioned |2.4.B.3a| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering near brake load valve |6.1.A.1| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch near shockabsorber |6.1.B.2| | 1 |
| Statutory seat belt missing nearside rear stalk |5.1.1| | 1 |
| Offside Front Outer Body insecure step |6.2.2 |a| |i|| | 1 |
| Offside Front Body has a sharp edge caused by damage Door handle |6.1.C.1| | 1 |
| Hydraulic fluid leaking excessively power steering leak |8.4.1 |a| |i|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded outer sill |2.1.2 |e| |i|| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded outer sill |2.1.2 |e| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension mount (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BY brake value (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced near front of rear wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring eye bush |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine vehicle limit 1.22 |8.2.2.2 |b|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in rear wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Steering column universal joint has excessive play |2.1.5| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired rear mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis behind brake compensator |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch various places |2.4.A.3| | 1 |
| Nearside Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Direction indicators not in good working order |not working| |1.5.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded outer chassis leg (load sensing valve) (1.1.21 (e) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded inner chassis leg (load sensing valve) (1.1.21 (e) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mount x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/inner sill area |5.3.6 |a| |i|| | 1 |
| Centre Front Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Trailer electrical socket deteriorated so that lead cannot be securely connected missing |1.9.3b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan by seat mounting |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured under sill and inner door step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is fractured under sill and inner door step |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger by spring shackle |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to inner door step area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under body chassis area |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill backing area |2.4.A.3| | 1 |
| Offside Rear Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Body has a sharp edge caused by damage both mirror bodies |6.1.C.1| | 1 |
| Offside Front Seat belt not functioning as intended not releasing |7.1.2 |c|| | 1 |
| Front Body component damaged and likely to cause injury grille panel |6.2.1 |a| |i|| | 1 |
| Fuel system component leaking excessively or a risk of fire engine bay |6.1.3 |b| |ii|| | 1 |
| Nearside Front Brake pipe leaking service brake not tested due to pipe failure |3.6.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is fractured wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outriggers and wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger and cross member |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded step / footwell |2.4.A.3| | 1 |
| Nearside Stop lamp emits other than a steady red light lens broken, will show white light when working |1.2.1e| | 1 |
| Nearside Loading door cannot be secured in the closed position side loading door partially open |6.4.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded doorstep/dropsill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded dropsill/outersill |2.4.A.3| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp remains on when lights are switched on |1.2.1f| | 1 |
| Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded o/s/r chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/f chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/f inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill /rear spring hanger area |2.4.A.3| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Body Mount Missing |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Body Mount Missing |6.1.B.2| | 1 |
| Nearside Rear Leaf spring fractured Spring Eye Incomplete |2.4.B.1a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded complete sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded complete sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded back panel / spring hanger. |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by rear spring hanger |6.1.B.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded STEP |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded STEP |5.2.6| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury tipper body |6.2.1 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury tipper body |6.2.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced driver seat base |7.1.1 |a| |i|| | 1 |
| Body mounting fixings insecure such that stability is seriously impaired tipper body pivot point |6.2.2 |c| |ii|| | 1 |
| Nearside Outer Seat belt insecurely fixed to the vehicles structure top bolt loose |5.2.1a| | 1 |
| Electrical wiring inadequately supported wiring loom along chassis |1.9.2a| | 1 |
| Brake disc significantly and obviously worn fronts excviliy corroded (1.1.14 (a) (i)) | 1 |
| Power steering malfunctioning tight spots on lock to lock (2.1.5 (a)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside front floor corroded to excess (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing by suspension strut top mount (5.3.6 (a) (i)) | 1 |
| Track rod end ball joint has excessive play nearside & offside (2.1.3 (b) (i)) | 1 |
| Nearside Rear Brake prescribed area is excessively corroded and functionality of the braking system is affected by brake compensator (1.1.21 (e) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis outrigger (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis outrigger (5.3.6 (a) (ii)) | 1 |
| Body component corroded and likely to cause injury nearside and offside tipper bed area sharp edges from corrosion (6.2.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced central floor area (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured door pillar |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step floor ect |7.1.1 |a| |i|| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Power steering component|s| inappropriately repaired reservoir insecure
|2.3.7| | 1 |
| Rear Anti-roll bar linkage insecure n/s and o/s |2.4.G.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Sticker and phone holder |8.3.1e| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sill (6.2.2 (d) (i)) | 1 |
| Centre Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up and rear |2.5.C.1d| | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen and o/s/f |1.8.B.1| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on chassis rail |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings on chassis rail |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to arch |6.1.B.2| | 1 |
| Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above fuel tank |6.1.1 |c| |i|| | 1 |
| Front Upper Position lamp not working |4.2.1 |a|| | 1 |
| Rear All position lamps not working nearside and offside marker lights not working |1.1.A.3b| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement nearside and offside D bushes |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner bush |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded chassis near leaf spring mount |2.4.A.3| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint swivel |2.5.B.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg/ inner wing area |2.4.A.3| | 1 |
| Driver`s seat insecure bolts missing and loose underneath |6.2.5 |a| |ii|| | 1 |
| Offside Front Body panel corroded and likely to cause injury wing corroded |6.2.1 |a| |i|| | 1 |
| Fuel tank insecure Fuel tank straps corroded and broken |6.1.3 |a| |i|| | 1 |
| Nearside Rear Brake valve leaking compensator leaking (1.1.7 (d) (i)) | 1 |
| Nearside Front Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill At Step |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Rear Panel And Outrigger At Spring Hanger |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Rear Panel And Outrigger At Spring Hanger |6.1.A.1| | 1 |
| Nearside Front Upper Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting At Fuel Pipe |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Step |6.2.2 |d| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/step well/sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/step well/sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis area |5.3.6 |a| |i|| | 1 |
| Offside Front Windscreen wiper missing (3.4 (a)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill & out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/ door step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/ door step (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired outer sill not continuously welded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind near side rear leaf spring (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking fuel filter (6.1.3 (b) (i)) | 1 |
| Rear passenger door catch missing |6.2.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner / outer sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner /outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30 cm of rear spring mount [ rear end ] (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front end of rear spring (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering out riggers x2 |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering out riggers x2 |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering door step |6.1.1 |c| |ii|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch foot well |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail where engine is mounted |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cghassis |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring and load compensating valve |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner chasis cross member |2.4.A.3| | 1 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement track rod end |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi rail |5.3.6 |a| |i|| | 1 |
| Central Suspension component mounting prescribed area is excessively corroded x member |2.4.A.3| | 1 |
| Leaf spring to axle securing nut insecure all 4 u bolts loose |2.4.B.7b| | 1 |
| Rear Suspension component attachment bracket/mounting corroded and seriously weakened both rear most inner arch corroded close to upper shock mount (5.3.3 (b) (i)) | 1 |
| Rear Suspension component attachment bracket/mounting corroded and seriously weakened both rear most inner arch corroded close to spring mount (5.3.3 (b) (i)) | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both (6.1.1 (c) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inside wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Front Torque/reaction arm has a deteriorated synthetic bush resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Torque/reaction arm has a deteriorated synthetic bush resulting in excessive movement |2.4.G.2| | 1 |
| Centre Front Seat belt locking mechanism does not secure or release MISSING |5.2.5a| | 1 |
| Nearside Rear Seat belt locking mechanism does not secure or release MISSING |5.2.5a| | 1 |
| Nearside Brake pipe inadequately clipped front to rear x2 |3.6.B.1| | 1 |
| Rear Electrical wiring damaged and bare wires exposed trailer socket |1.9.2c| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill x3 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis x2 |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by rear leaf spring fixing (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by rear leaf spring fixing (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under body sill |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired under body sill |6.2.2 |d| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired door step |6.2.2 |d| |ii|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering out rigger |6.1.1 |c| |ii|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Top chassis under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Top shock absorber mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Top shock absorber mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner and Outter body sills |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner and Outter body sills |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded End of body cab |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded End of body cab |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill step areas |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring - inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake cable has wires broken and is significantly weakened Badly rusted and worn on rear wheel |3.5.1b| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded Strut mounting and inner front wing |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Inner sill (6.2.2 (d) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Inner sill (6.2.2 (d) (ii)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Outer sill (6.2.2 (d) (ii)) | 1 |
| Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Outer sill (6.2.2 (d) (ii)) | 1 |
| Integral body structure has excessive corrosion which adversely affects braking or steering Handbrake cable mount (6.1.1 (c) (ii)) | 1 |
| Rear Integral body structure has excessive corrosion which adversely affects braking or steering Cross member (6.1.1 (c) (ii)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering Lower body sill |6.1.1 |c| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill/sill step |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Cross member above exhaust silencer |6.2.2 |d| |ii|| | 1 |
| Rear Outline marker lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded flaw |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement INNER REAR |2.4.G.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear chassis |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front and rear chassis |6.1.B.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded nearside and offside chassis and crossmembers |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded nearside and offside inner wheel arch |2.4.A.3| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember and chassis |6.6.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded innner and outer sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside and offside rear shocker mount |2.4.A.3| | 1 |
| Nearside Front Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sills along foot step |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings same as above |6.1.B.2| | 1 |
| Centre Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded WHEEL ARCH |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded WHEEL ARCH |5.2.6| | 1 |
| Rear Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Offside Rear Leaf spring shackle bracket insecure (5.3.1 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect bulb incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect bulb incorrect (4.1.2 (c)) | 1 |
| Offside Front Upper Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet (5.3.6 (a) (i)) | 1 |
| Brake pivot excessively corroded underside at back of cab (1.1.15 (b)) | 1 |
| Prop shaft bearing housing fractured front mounting rotten (6.1.7 (f) (i)) | 1 |
| Rear Prop shaft joint excessively worn front joint (6.1.7 (c) (i)) | 1 |
| Rear Service brake effort inadequate at a wheel nearside and offside |1.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill area |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded INNER REAR AND FRONT COMPLETE SIL |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER SIL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INNER WING CHASSIS LEG REAR BOX SECTION |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS LEG INNER WING AREA BOX SECTION |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING AREA CHASSIS LEG |2.4.A.3| | 1 |
| Front Front position lamp|s| not working both top markers not working |1.1.A.3b| | 1 |
| Rear Braking system leaking compenseter |3.6.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seal and step |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seal and step |5.2.6| | 1 |
| Rear rear brake recording little or no effort both side |3.7.B.5a| | 1 |
| Offside Front Body insecure and dangerous to other road users wing |6.1.B.1b| | 1 |
| Nearside Electrical wiring damaged and bare wires exposed |1.9.2c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor / arch panel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor / arch panel |2.4.A.3| | 1 |
| Offside Front Upper Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d; bushes |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Rear of cab |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area front and rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area front and rear |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch area |6.1.B.2| | 1 |
| Offside Lower All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Lower All position lamps excessively damaged so they are not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis ,member inside and outside corroded to excess, top shock mount area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member spring shackle area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member spring shackle mounting area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill outrigger |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner wheel arch front spring area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt lower ball joint cover |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quarter sill and arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner quater (5.3.6 (a) (i)) | 1 |
| Offside Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn ARM REAR BUSH (5.3.4 (a) (i)) | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS OUT RIGGER (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS LEG (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting REAR INNER ARCH TO FLOOR (6.2.2 (d) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis on top and under wheel arch |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step not welded all round and inner sill holed |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength side step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp pulsating with indicator |4.2.3 |c|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch where marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring mount chassis area where marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail|inner wing where marked| |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/out rigger area x2 patches where marked (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to bonnet not opening |8.2.2.2 |e|| | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe mount to chassis corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of front subframe area corroded (has been repaired using expanding foam and filler) (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength offside front lower chassis to subframe corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn suspension arm rear bush worn (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above chassis (5.3.6 (a) (i)) | 1 |
| Centre Front Upper Fuel pipe union leaking |7.2.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmembers |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement end bush |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting area |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills front spring mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills front spring mounting corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Nearside rear brake recording little or no effort service brake |3.7.B.5a| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Nearside Seat belt insecurely fixed to the seat not fitted to floor |5.2.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings suspension top mount |6.1.B.2| | 1 |
| Offside Front Body has a sharp edge caused by damage mirror body |6.1.C.1| | 1 |
| Offside Position lamp has a product on the lens or light source which shows white light to the rear |4.2.3 |b| |ii|| | 1 |
| Nearside Drag link end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced of cab floor |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury buck |6.2.1 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury buck |6.2.1 |a| |i|| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Upper Front position lamp|s| not working Top Marker |1.1.A.3b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed |6.1.B.2| | 1 |
| Rear Body has a sharp edge caused by corrosion tow bar area |6.1.C.1| | 1 |
| Front Steering rack fractured and unserviceable |2.2.C.1d| | 1 |
| Front Radius arm severely distorted |2.4.G.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine sub frame marked yellow chalk |6.1.B.2| | 1 |
| Prop shaft bearing excessively worn 2nd bearing from gearbox |6.1.7 |b| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear crossmember |6.2.2 |d| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush fixing loose |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage insecure link rod nut loose |2.4.G.1| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength corrosion hole under n/s/f wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn swivel (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Forward leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor|underneath| |5.2.6| | 1 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt lower |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering near compensator mount |6.1.A.1| | 1 |
| Offside Front Vehicle structure has a modification which adversely affects braking or steering brake pipe mount |6.1.A.1| | 1 |
| Rear Body insecure and dangerous to other road users BUMPER |6.1.B.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CHASIS |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward eye bolt |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded leaf spring shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded leaf spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring shackle mountiing |5.3.6 |a| |i|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear floor and chassis |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both front inner wings |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering Outer sill |6.1.1 |c| |ii|| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering Inner sill |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Outer rigger |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Wheel arch |6.1.1 |c| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassies |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassies |2.4.A.3| | 1 |
| Offside Outer Front Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake pipe inadequately supported main |3.6.B.1| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to floor |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings to floor |6.1.B.2| | 1 |
| Fuel pipe leaking injector leak off pipe |6.1.3 |b| |i|| | 1 |
| Offside Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow cross member (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow cross member (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked in yellow (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked in yellow (6.2.2 (d) (i)) | 1 |
| Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing(s) marked in yellow both sides (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis marked in yellow (6.2.2 (d) (i)) | 1 |
| Rear Service brake excessively binding both sides (1.2.1 (f)) | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded[marked] |6.1.B.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded[marked] |6.1.B.2| | 1 |
| Nearside Headlamp adversely affected by the operation of another lamp stop lamp |1.7.5c| | 1 |
| Nearside Obligatory mirror missing mirror glass missing |8.1.1| | 1 |
| Offside Lower All position lamps not working marker lights x 2 |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/step (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Top shock absorber mount |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded footstep |5.2.6| | 1 |
| Rear fog lamp not working fog light not working |4.5.1 |a| |ii|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing strut housing |6.1.1 |c| |ii|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering drivers rear spring area both sides in front of axle |6.1.1 |c| |ii|| | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced rear chassis drivers side |6.1.1 |a| |i|| | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced passenger side rear behind wheel |6.1.1 |a| |i|| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering sills both sides both sides |6.1.1 |c| |ii|| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced sill inner passenger side |6.1.1 |a| |i|| | 1 |
| Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt both bottom ball joint rubber split both sides |2.1.3 |g| |ii|| | 1 |
| Headlamp aim does not move downwards when dipped |British American headlamp| |1.8.C.4| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded valance
|2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill
|5.2.6| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring shackle area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf spring shackle area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill/Out Rigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded Shock absorber |2.4.A.3| | 1 |
| Offside Rear Direction indicator lens defective such that the emitted light is adversely affected effected by operation of another light |4.4.1 |b| |ii|| | 1 |
| Brake load sensing valve linkage defective and function impaired excessive corrosion at mounting point |1.1.17 |a|| | 1 |
| Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength road spring front mounting area corroding (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded FLOOR AND INNER SILL |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded FLOOR AND INNER SILL |5.2.6| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch/chassis |6.2.2 |d| |i|| | 1 |
| Braking system leaking at rear of fuel filter |3.6.A.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step/ outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill / arch (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Forward leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mounting in wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Forward most mounting. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Rear most mounting. (5.3.6 (a) (i)) | 1 |
| Stop lamp not working OS stop / tail |1.2.1b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp NS + OS |1.1.A.3f| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint by OS of rack |2.3.3b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded OSF sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded NSF + OSF inner wheel archs / NSF Floor |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded NSR + OSR sills / lower part of outriggers / OSR inner wheel arch + chassis rail as chalked |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced as chalked |7.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as chalked |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as chalked |6.1.1 |c| |i|| | 1 |
| Offside Front Sub-frame corroded and seriously weakened as chalked |5.3.3 |b| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength suspension mounting |5.3.6 |a| |i|| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (chalked in yellow) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (chalked in yellow) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (chalked in yellow) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (chalked in yellow) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (chalked in yellow) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around bump stop (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/outer sill/door step (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber prescribed area x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock absorber prescribed area x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Shock absorber mount on chassis |2.4.A.3| | 1 |
| Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement bottom arm rear bushes |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded where spring bolts and chassis leg infront |2.4.A.3| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill front & rear |5.2.6| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember tow bar fitted. |6.1.B.2| | 1 |
| Central Rear Mechanical brake component locking device insecure |3.5.1l| | 1 |
| Centre Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded door step panel |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded door step panel |5.2.6| | 1 |
| Steering column universal joint insecure |2.1.3 |a| |i|| | 1 |
| Offside Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Offside Front Track rod end ball joint has excessive play Inner joint (2.1.3 (b) (i)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded in wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner seal in number of places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner seal and step area in number of places front to back |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch in number of places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch in number places |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill and under step (7.1.1 (a) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded undersill |2.4.A.3| | 1 |
| Nearside Front Cab steps in such a condition that it is likely to cause injury understep corroded slightly (6.2.8 (b)) | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury understep several (6.2.8 (b)) | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member to valances both sides (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch behind wheel (6.1.1 (c) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced understep (7.1.1 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both understeps (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under sill several places (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arches excessively corroded several places both sides (6.2.2 (d) (i)) | 1 |
| Nearside Rear Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front of arch |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d mounting bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d mounting bush |2.4.G.2| | 1 |
| Brake pedal anti-slip provision worn smooth and spit |3.3.A.1b| | 1 |
| Outline marker lamp missing both rears missing |4.2.1 |a|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x1 |7.1.1 |a| |i|| | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear `D` bushes |5.3.4 |a| |i|| | 1 |
| Offside Rear Outline marker lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x1 (7.1.1 (a) (i)) | 1 |
| Fuel pipe union leaking back of fuel pump (6.1.3 (b) (i)) | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f body seal |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f inner arch |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f door step |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner arch |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f chassis rail |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f chassis rail |6.1.B.2| | 1 |
| Central Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear end body work |6.1.B.2| | 1 |
| Offside Rear brake caliper securing device loose |3.5.1j| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt to hub assembly |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis x3 |2.4.A.3| | 1 |
| Nearside Rear Brake pipe inadequately supported hose to pipe |3.6.B.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is fractured sprint front mount |2.4.A.3| | 1 |
| Rear Brake actuating linkage mounting prescribed area is fractured brake load valve |3.3.A.2| | 1 |
| Rear Brake actuating linkage mounting prescribed area is fractured brake hose mount |3.3.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member and chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis beam previous repair corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis beam is corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis beam has hole next to fuel tank (6.1.1 (c) (i)) | 1 |
| Prop shaft bearing excessively worn centre propshaft bearing worn and support torn (6.1.7 (b) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front and back areas |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mountings |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mountings |5.3.6 |a| |i|| | 1 |
| Rear Service brake excessively binding n/s and o/s |1.2.1 |f|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.A.1| | 1 |
| Nearside Rear Lower Intermediate drop arm insecure |2.2.B.1a| | 1 |
| Nearside Body obviously not squarely located on chassis (6.2.2 (b)) | 1 |
| Offside Body obviously not squarely located on chassis (6.2.2 (b)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis, near body mount/suspension mounts (6.2.2 (d) (i)) | 1 |
| Offside Outer Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded inner sill behind leaf spring |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside inner sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front inner arch chassis |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body meet chassis |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body meet chassis |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis member in front of front subframe mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded main chassis rail next to rear leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger next to rear leaf spring mounting |2.4.A.3| | 1 |
| Brake pipe leaking o/s front to rear |3.6.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r front and rear leafspring areas |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r x member / inner panal/n/s/r outrigger |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r spring hanger area |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded center outrigger |several| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger|several| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/innersill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above the rear axle as marked |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above the rear axle as marked |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing as marked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded floor as marked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing to floor section as marked |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill behind rear wheel |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step area full |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre outer sill |6.1.B.2| | 1 |
| Central Front Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x2 (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear leaf mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting point of rear spring on outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear mounting point of spring on outrigger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail,12" to subframe mount |2.4.A.3| | 1 |
| Fluid leak harmful to the environment or a risk to other road users coolant leak from coolant pump (8.4.1 (a) (i)) | 1 |
| Offside Rear Leaf spring fractured shackle eye broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch and quarter panel quarter panel detached at bottob |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis/rear crossmember area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember area |2.4.A.3| | 1 |
| Nearside Front Inner Suspension arm has excessive play in a pin/bush rear bush collopsed |2.4.G.2| | 1 |
| Offside Front Inner Suspension arm has excessive play in a pin/bush rear bush collopsed |2.4.G.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension arm ball joint excessively worn lower |5.3.4 |a| |i|| | 1 |
| Offside Suspension arm pin or bush excessively worn both side |5.3.4 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch front (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch rear (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch front (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch rear (6.1.1 (c) (i)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety diesel leaking from engine (8.4.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step/sill holed (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cab x member holed (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking fuel pump leaking from the body joint (6.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area (5.3.6 (a) (i)) | 1 |
| Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded brake load valve |3.1.9| | 1 |
| Offside Rear Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded center |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near rear spring front hanger (5.3.6 (a) (i)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, also has inadequate repairs (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, also has inadequate repairs (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, also has inadequate repairs (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outrigger, body webbing (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outrigger/ body webbing (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, also has inadequate repairs (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor, can be seen when looking near gearbox area, hole above chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Rear Leaf spring fractured snapped at front hangar (5.3.1 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valence |5.3.6 |a| |i|| | 1 |
| Central Rear Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Spring Mount |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Spring Mount |6.1.A.1| | 1 |
| Offside Front Horn not working (7.7 (a) (ii)) | 1 |
| Centre Rear Upper Brake linkage locking device insecure |3.5.1l| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis marked in yellow |2.4.A.3| | 1 |
| Fuel tank insecure Tank strap rusty |6.1.3 |a| |i|| | 1 |
| Nearside Brake cable damaged Broken |1.1.15 |a|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded top inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis load sensor valve mounting area |3.3.A.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis member top shock mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis member top shock mounting area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear floor top shock mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear floor top shock mounting area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shackle box spring mounting area |2.4.A.3| | 1 |
| Offside Front Body has a sharp edge caused by damage spot light glass damaged and exposed sharp edges |6.1.C.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wing to chassis strengthener panel |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis to floor strengthener panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner side panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner side panel |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill panel |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner arches |2.4.A.3| | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember at handbrake cable mount (6.1.1 (c) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step (7.1.1 (a) (i)) | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded crossmember (cable mounting) (1.1.21 (e) (i)) | 1 |
| Offside Brake cable insecure fouling wheel (1.1.15 (c)) | 1 |
| Nearside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
| Centre Front drive shaft coupling is excessively worn prop shaft |2.5.C.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by spring hanger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by brake compensator |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL BY UPPER DAMPER MOUNT. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL BY UPPER DAMPER MOUNT. |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded CROSS MEMBER BOX SECTION BY SPRING HANGER. |2.4.A.3| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting all strenghening bars on rear corroded (underside of buck) (6.2.2 (d) (i)) | 1 |
| Nearside Body has a sharp edge caused by corrosion Sharp edges along length of vehicle |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion Sharp edges along length of vehicle |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted inner step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger in front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger at rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger behind spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded 2 sections |2.4.A.3| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front to back (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill front to back (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Lower Leaf spring damaged and permanently distorted |2.4.B.1a| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front inner sills and door steps |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch/floor |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill & door step |6.1.B.2| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 2 sections |6.1.B.2| | 1 |
| Offside Side repeater incorrect colour lense missing |1.4.A.2f| | 1 |
| Nearside Front Dropside cannot be secured in the closed position handell broken cant be open |6.4.1| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn Both (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger panel |2.4.A.3| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill within 30cm of seat belt mount |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings rear within 30cm of leaf spring hanger |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill within 30cm of leaf spring hanger |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre of inner sill within 30cm of seat belt mount |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre of outer sill |6.1.B.2| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Centre Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front of spring attachment |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of spring attachment |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded spring rear mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring mounting rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mounting |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2| | 1 |
| Rear Body has a projection caused by corrosion both sides under sill |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked in yellow |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch of |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill of |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill of |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor to wheel arch of |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill of |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill of |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded floor to wheel arch of |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill of |5.2.6| | 1 |
| Offside Front Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn inner D bush (5.3.4 (a) (i)) | 1 |
| Offside Body has a sharp edge caused by corrosion in no of placse |6.1.C.1| | 1 |
| Offside Dropside cannot be secured in the closed position holed + corroded |6.4.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All marked areas. |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer body sill areas where marked |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill step area where marked |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer body sill area where marked |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer body sill area where marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger area where marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail area both sides of chassis rail where marked |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch tub/floor area where marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger area where marked |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Fuel system component leaking Around injectors (6.1.3 (b) (i)) | 1 |
| Emissions not tested due to water leak and excessive smoke |8.2.1.2 |d|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded strut mounting |2.4.A.3| | 1 |
| Nearside Rear Leaf spring with an unsafe modification loose |5.3.1 |d| |i|| | 1 |
| Offside Rear Leaf spring with an unsafe modification loose |5.3.1 |d| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg & out riggers (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills extensively corroded (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear panel cross member (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward of axle sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill forward of wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded load sensor mount |1.1.21 |e| |i|| | 1 |
| Nearside Rear Oil leaking excessively from transmission |8.4.1 |a| |i|| | 1 |
| Nearside Front Body insecure and dangerous to other road users bumper flapping |6.1.B.1b| | 1 |
| Offside Rear Outer Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Offside Front Inner Leaf spring anchor bracket corroded and seriously weakened |2.4.B.6d| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SEEN FROM ENGINE BAY, MARKED WITH YELLOW CHALK (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NEXT TO ENGINE MOUNTING, SEEN FROM ENGINE BAY, MARKED WITH YELLOW CHALK (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced REAR CORNER, MARKED WITH YELLOW CHALK (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL, MARKED WITH YELLOW CHALK (6.1.1 (c) (i)) | 1 |
| Rear Leaf spring shackle pin not correctly positioned |2.4.B.3a| | 1 |
| Emissions not tested engine coolant leak (8.2.2.2 (e)) | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp bulb in wrong |1.2.1f| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp bulb to bright |1.1.A.3f| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill area to wheel arch |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill area to front wheel arh |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section holed rear of shocker mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded section at rear spring hanger area holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill section holed with in spring hanger area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill panel to front area of rear spring hager |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring mount area corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis area corroded and holed |2.4.A.3| | 1 |
| Nearside Body has a projection caused by corrosion inner sil |6.1.C.1| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp flashes with indicator. |1.1.A.3f| | 1 |
| Front Suspension arm corroded and seriously weakened both arms |5.3.3 |b| |i|| | 1 |
| Front Suspension arm pin or bush excessively worn rear bushes |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Towbar fractured seriously affecting its strength within 30cm of towbar mounting |6.1.6 |i| |i|| | 1 |
| Offside Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Trailing arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Tie bar/rod locating pin insecure both anti roll link arms |2.4.G.3a| | 1 |
| Body insecure and dangerous to other road users body bolts missing |6.1.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg with 30cm of suspension mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg/engine mounting area |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering in three places chassis leg |6.1.A.1| | 1 |
| Offside Front Braking system leaking hose to caliper |3.6.A.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded chassis around spring both sides |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush wishbone rear mtng |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded brake hose mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded brake load valve chassis |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both inner /outer cills |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both front steps |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion both rear w/arches |6.1.C.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering around spring hanger |6.1.A.1| | 1 |
| Rear Swivelling towbar swivel pin retaining device missing |6.6.5c| | 1 |
| passenger door cannot be opened from outside the vehicle bonnet
|6.2.B.1c| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush rear bush
|2.4.G.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Unable to open the bonnet |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jack point area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/under side area |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch/near wing attachment |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch/near wing attachment |2.4.A.3| | 1 |
| Nearside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings On chassis |6.1.B.2| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings On side step |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings On rear leaf spring mounting area |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush trailing bush knocking on subframe. |2.4.G.2| | 1 |
| Front Pre 1950 headlamp aimed so that it dazzles other road users |1.6.A1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to step[ |6.1.B.2| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded behind drivers seat in cab |5.2.6| | 1 |
| Offside All position lamps not working MIDDLE AND REAR SIDE MARKERS INNOP |1.1.A.3b| | 1 |
| Nearside All position lamps not working MIDDLE AND REAR SIDE MARKERS INNOP |1.1.A.3b| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt lower arm ball joint |5.3.4 |b| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch/strut top mounting. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting. |2.4.A.3| | 1 |
| Nearside coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Rear Braking system leaking pipe |3.6.A.1| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting x3 |6.6.6| | 1 |
| Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp all |1.1.A.3f| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner to outer sill all |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill to step area |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre chassis near fuel pipe |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis / inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis / inner wing |2.4.A.3| | 1 |
| Headlamp aim beam image obviously incorrect aim is very high,due to bulb fitted incorrectly |1.8.A.1b| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit limit 0.75 |3.80| |8.2.2.2 |a|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Nearside Front rear brake juddering severely |3.7.A.5b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill to spring hanger |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded cross members |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is inadequately repaired cross members |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis sub frame mount (5.3.6 (a) (i)) | 1 |
| Offside Parking brake lever is fouling adjacent parts of the vehicle |3.1.6b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer rigger to sill |5.2.6| | 1 |
| Offside Rear Body component corroded and likely to cause injury tipper |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted sill |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded strut top area |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top area |2.4.A.3| | 1 |
| Offside Front Brake rod locking device insecure |3.5.1l| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load bed |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load bed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings load bed |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis to rear of cab |5.2.6| | 1 |
| Nearside Inner Front Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side sill in and out |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cm of rear shock absorber mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at rear of spring mounting is corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear of spring is corroded |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep |7.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill section |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill section |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill section |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section |5.3.6 |a| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill section, inner sill section and rear arch section |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch section (5.3.6 (a) (i)) | 1 |
| Nearside Floor excessively deteriorated outer sill section (6.2.4 (a) (i)) | 1 |
| Offside Front Floor excessively deteriorated inner sill section (6.2.4 (a) (i)) | 1 |
| Nearside Fuel cap/sealing device ineffective does not lock correctly (pulls off) (6.1.3 (b) (i)) | 1 |
| Nearside Front Brake disc fractured Disc broken away from hub (1.1.14 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis engine compartment |2.4.A.3| | 1 |
| Front Suspension arm pin or bush excessively worn Both NS & OS lower arm rear bushes |5.3.4 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Both NS & OS chassis holed |5.3.6 |a| |i|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both NS & OS holed chassis under arches multiple places |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both NS & OS rear chassis holed |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced slam pannel rotten and holed across and in around body/suspension mountings |6.1.1 |c| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both NS & OS inner arches holed |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed |6.2.2 |d| |i|| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both NS & OS inner steps holed |6.2.2 |d| |i|| | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced sharp edge |1.7.5a| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill by rigger |6.1.B.2| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp stop light affecting indicator etc (4.4.3 (b)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced box section below servo area into underside of vehicle excess corrosion (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step area underside to sill area excess corrosion (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step area to sill area excess corrosion (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area to floor corroded to holes (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill and chassi |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing and chassi |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassi outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassi at shocker mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassi at shocker mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill to door step |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near sub frame mounting |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill /step area |7.1.1 |a| |i|| | 1 |
| Horn control missing switch broken |1.6.1| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides out riggers |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassie next to load sensor valve |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both rear shackle pin mountins corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted sill step |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded OSR out rigger |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded Both rear shackle pin mountings corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis next to load sensor valve corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Door step corroded |5.2.6| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis corroded |6.1.B.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner arch corroded |2.4.A.3| | 1 |
| Offside Front Lower Ball joint damaged and unserviceable |2.2.C.1d| | 1 |
| Leaf spring anchor bracket damaged and seriously weakened |2.4.B.6d| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis is badly corroded around rear suspention mounts |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis badly corroded |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings gearbox mount and front chassis leg badly corroded |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg and around the engine mount is badly corroded |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under bonnet inner wing area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind wheel marked yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 places |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn marked in yellow |5.3.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D bush marked in yellow |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush marked in yellow |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn lower drop link bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush likely to become detached drop link insecure |5.3.4 |a| |ii|| | 1 |
| Fuel tank insecure front strap corroded off |6.1.3 |a| |i|| | 1 |
| Prop shaft bearing housing insecure center propshaft bearing housing |6.1.7 |f| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill excessively corroded and holed. |5.2.6| | 1 |
| Offside Front Body has a sharp edge caused by damage bumper insecure |6.1.C.1| | 1 |
| Rear Brake pipe inadequately clipped Running across axle |3.6.B.1| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement wrong type |7.2.4b| | 1 |
| Nearside Front Upper Front position lamp|s| not working marker light |1.1.A.3b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner closing panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and doorstep (5.3.6 (a) (i)) | 1 |
| Emissions not tested oil low (8.2.2.2 (e)) | 1 |
| Front Suspension component mounting prescribed area is excessively corroded chassis both sides |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded floor/inner wheel arch both sides |2.4.A.3| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded floor both sides |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded front seat bolt |5.2.6| | 1 |
| Offside Front Service brake imbalanced across an axle slow to release brake effort (1.2.1 (b) (i)) | 1 |
| Central Exhaust system not adequately supported Clamp |7.1.1| | 1 |
| Front Driving control|s| clutch pedal anti-slip provision missing |6.8.3| | 1 |
| Nearside Front Inner Cab steps in such a condition that it is likely to cause injury (6.2.8 (b)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting cross member (6.2.2 (d) (i)) | 1 |
| Rear Direction indicator not working fault due to bad earthing |4.4.1 |a| |ii|| | 1 |
| Rear Position lamp not working faulty |4.2.1 |a|| | 1 |
| Stop lamp|s| all not working faulty |4.3.1 |a| |iii|| | 1 |
| Offside Rear Body insecure and dangerous to other road users stay |6.1.B.1b| | 1 |
| Nearside Upper Vehicle structure has excessive corrosion which adversely affects braking or steering top rail all |6.1.A.1| | 1 |
| Offside Upper Vehicle structure has excessive corrosion which adversely affects braking or steering top rail all |6.1.A.1| | 1 |
| Centre Front Seat belt flexible stalk deteriorated likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Rear Front position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired |5.1.B.7| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Sill marked in yellow |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Step, marked in yellow |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill, marked in yellow |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Sill marked in yellow |5.2.6| | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt x2 (5.3.4 (b) (ii)) | 1 |
| Front Inner Anti-roll bar pin or bush excessively worn x2 (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement x 2 |2.4.G.2| | 1 |
| Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement n s front |2.4.G.2| | 1 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint middle front to rear mounting |2.4.G.4b| | 1 |
| Front position lamp|s| not working Sidelights |1.1.A.3b| | 1 |
| Rear position lamp|s| not working Sidelights |1.1.A.3b| | 1 |
| Nearside Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings And outter sill |6.1.B.2| | 1 |
| Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o s and n s box section by leaf spring |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis by wheel arch |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step location |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering shock tarret |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings door step |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering under sill |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering step |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering under wing |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering under wing |6.1.A.1| | 1 |
| Nearside Front Body panel insecure |6.2.1 |a| |i|| | 1 |
| Nearside Body has an unsafe modification inner and outer sills |6.2.1 |d| |i|| | 1 |
| Offside Body has an unsafe modification inner and outer sills |6.2.1 |d| |i|| | 1 |
| Spare wheel likely to become detached |6.1.5 |b| |ii|| | 1 |
| Front Steering column top bearing excessively worn |2.1.2c| | 1 |
| Nearside Rear Hazard warning lamps operated by more than one switch |1.4.B.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is severely distorted both sill |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is inadequately repaired both lower wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis over axle |5.2.6| | 1 |
| Fuel system component leaking return pipes |7.2.3| | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 3 places (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 1 place (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Bump stop area (6.1.1 (c) (i)) | 1 |
| Seat belt stitching badly frayed Drivers seat belt |5.2.2b| | 1 |
| Offside Rear Direction indicators have a product on the lenses so they are not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Outer Front Seat belt stitching incomplete |5.2.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/inner/outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch/inner/outer sill |2.4.A.3| | 1 |
| Nearside Rear Leaf spring to axle securing bolt insecure U bolts |2.4.B.7b| | 1 |
| Front Front wheel bearing has excessive play both sides |2.5.A.3c| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch, both sides |6.1.B.2| | 1 |
| Offside Front Statutory seat belt missing stalk |5.1.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill before rear axle |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill after rear axle behind bumper |2.4.A.3| | 1 |
| Nearside Inner Rear Lower Loading door cannot be secured in the closed position |6.4.1| | 1 |
| Offside Front Upper Power steering component|s| leaking |2.3.3b| | 1 |
| Nearside Front passenger door hinge deteriorated so the door cannot be readily opened or closed |6.2.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring mounting |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel of wheel arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner , upper of wheel arch |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above axle |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Above axle |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Step |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch rear |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch rear |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch front |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch rear |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch front |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Front position lamp|s| not working main beam bulb inop |1.1.A.3b| | 1 |
| Nearside Rear Rear position lamp|s| not working tail light bulb inop |1.1.A.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step inner sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door step inner sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing door step |6.1.B.2| | 1 |
| Central Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member at hand brake mounting |6.1.B.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed/corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear bushe |5.3.4 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed /corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed corroded |7.1.1 |a| |i|| | 1 |
| Offside Outer Dropside corroded and likely to cause injury hinge broken / sharpe edges |6.2.1 |a| |i|| | 1 |
| Nearside Dropside corroded and likely to cause injury sharpe edges /corroded |6.2.1 |a| |i|| | 1 |
| Nearside Rear Braking system leaking Brake limiting valve |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Strut |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner rear panel and surrounding area (marked in yellow) (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill area as marked |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill area as marked |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Inner Steering linkage ball joint has excessive play tie rod (2.1.3 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill under drivers step , marked |5.2.6| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values Plate limit 0.75 ,first reading 7.9 (8.2.2.2 (f)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor between seat mounting bolts , marked (7.1.1 (a) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine Plate limit 0.75 (8.2.2.2 (b)) | 1 |
| Oil leaking excessively from engine Oil filter / cooler area |8.4.1 |a| |i|| | 1 |
| Prop shaft bearing excessively worn Marked |6.1.7 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded compensator mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded by front of spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis / floor by wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill section by front of rear spring |2.4.A.3| | 1 |
| Nearside Inner Rear Brake cable locking device insecure |3.5.1l| | 1 |
| Offside Front Steering retaining device missing |2.2.C.1g| | 1 |
| Offside Direction indicator flashing more than 120 times a minute Front, rear and side repeater |1.4.A.2g| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill/ step area |5.2.6| | 1 |
| Nearside Body has a sharp edge caused by damage OUTER SILL |6.1.C.1| | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to engine bay |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch to floor |6.1.B.2| | 1 |
| Offside Front engine mounting bracket missing chassis leg holed |6.1.D.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded and cross member |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 1 |
| rear brake recording little or no effort Handbrake |3.7.B.5a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drop sill x2 |6.1.B.2| | 1 |
| Exhaust system insecure rear bracket snapped (6.1.2 (a)) | 1 |
| Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded sill and inner sill areas |2.4.A.3| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step and sill assembly (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step and sill assembly. (6.1.1 (c) (i)) | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp Poor earthing on the whole cluster of lamps |4.4.3 |b|| | 1 |
| Offside Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting very end marked by yellow chalk, inner sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill along the length of vehicle on underside to the very end conner near spring mounting area at the back |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inside wheel well. |6.2.2 |d| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill offside middle |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill |6.1.B.2| | 1 |
| Brake pump insecurely mounted abs pump |3.6.A.2a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded in front of new welded plate |2.4.A.3| | 1 |
| Offside Outer Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi rail (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassie rail (5.3.6 (a) (ii)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s/ front center and rear
inner wheel arches and steps, chassis, backpanel |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing near suspension leg |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded near side and off side rear inner lower back pannels box sections corroderd near spring hangers |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded centre box section corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded behind near side rear inner arch corroderd |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded behind off side front inner chassi and inner arch corroderd |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases rear tail pipe missing |7.1.2| | 1 |
| Offside Body has a sharp edge caused by damage Mirror housing |6.1.C.1| | 1 |
| Nearside Rear Electrical wiring insecure Along chassis |1.9.2a| | 1 |
| Offside Side repeater excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength Both sides rear mounts |2.4.A.3| | 1 |
| Nearside Rear Leaf spring fractured Mounting eye |2.4.B.1a| | 1 |
| Rear Radius arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rearward other side |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill box |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill box |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel tub to floor |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected chassis in wheel arch (1.1.21 (e) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Damaged |3.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded near rear shocker |5.3.6 |a| |i|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced affected my hazards and stop lights |4.2.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner & outer sill (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner & outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch & load area floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch & load area floor (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis plate in wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn lower arm rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/step area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock absorber mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength near shock absorber mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor under seat |6.1.B.2| | 1 |
| Towbar component insecure both upper mount bolts missing |6.6.1| | 1 |
| front brakes release unevenly 87% out of balance |3.7.B.4| | 1 |
| Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc both front |2.5.C.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded drivers kick plate. |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill step area |6.1.B.2| | 1 |
| Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis crossmember |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering spring hangar |6.1.A.1| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis outrigger |6.1.A.1| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering boot floor chassis brace |6.1.A.1| | 1 |
| Offside Front suspension has excessive play in a track control arm inner bush rear bush |2.5.B.2b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at strut top |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Nearside rear brake recording little or no effort low |3.7.B.5a| | 1 |
| Electrical wiring inadequately supported drivers foot-well |1.9.2a| | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. *2 |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings entire sill. |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg/sill after wheel. |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg/sill after wheel. |6.1.B.2| | 1 |
| Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings edges of bumper corroded through. |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger by inner step |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded step |2.4.A.3| | 1 |
| Body component corroded and likely to cause injury tipper sides, corroded leaving jagged edges |6.2.1 |a| |i|| | 1 |
| Fuel cap/sealing device ineffective of temporary type, not secured by positive means |6.1.3 |b| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength door step area |5.3.6 |a| |i|| | 1 |
| Position lamp not working both roof lights (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill (6.1.1 (d) (i)) | 1 |
| Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill (6.1.1 (d) (i)) | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users plate limit 1.19 (8.2.2.2 (c)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury body (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury body (6.2.1 (a) (i)) | 1 |
| Rear Upper Body component likely to become detached body chassis corroded (6.2.1 (a) (ii)) | 1 |
| Central Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush likely to become detached loose (5.3.4 (a) (ii)) | 1 |
| Brake cable has restricted free movement hand brake cables fouling wheels (1.1.15 (e)) | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both nearside and offside inner sills |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both nearside and offside outersills |6.1.B.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch and chassis |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded buy shackle |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear Outer rigger marked in white chalk |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear Outer rigger marked in white chalk |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer rigger marked in white chalk |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill marked in white chalk |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill marked in white chalk |2.4.A.3| | 1 |
| Fuel system component leaking fuel dripping from n/s of engine over starter motor |7.2.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor next to seat mounting on chassis |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre out rigger |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear leaf spring anchor end |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near rear chassis |6.2.2 |d| |i|| | 1 |
| Central Rear Vehicle structure has excessive corrosion which adversely affects braking or steering bump stop area |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch as marked |6.1.1 |c| |i|| | 1 |
| Emissions not tested engine fault/ induction problem (8.2.2.2 (e)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch to floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch to floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step area (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush (split from case ) (5.3.4 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis behind wheel (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel (6.1.1 (c) (i)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle of sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp x 2 |1.1.A.3f| | 1 |
| Offside Seat belt anchorage prescribed area is fractured cab out rigger |5.2.6| | 1 |
| Offside Direction indicator flashing more than 120 times a minute front and rear |1.4.A.2g| | 1 |
| Rear Outline marker lamp not working o/s and n/s |4.2.1 |a|| | 1 |
| Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s strut top towers |5.3.6 |a| |i|| | 1 |
| Offside Front Driver`s airbag obviously defective reset at station |5.4.1| | 1 |
| Offside Front Front position lamp|s| not working side marker light |1.1.A.3b| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by inner foot step (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis by sub frame (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn `d`bushes |5.3.4 |a| |i|| | 1 |
| Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Body component damaged and likely to cause injury mirror back (6.2.1 (a) (i)) | 1 |
| Outer Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting WHEEL ARCH INNER WING (6.2.2 (d) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded over axle |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis near engine mount |2.4.A.3| | 1 |
| Nearside Front Front drive shaft damaged |2.5.C.2a| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement Front bush |2.4.G.2| | 1 |
| Offside Rear Direction indicator not working This was working at start of test. |1.4.A.2c| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush Lower D bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush Lower D bush |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush Link arm bush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Cross member near to front spring saddle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Cross member near to front spring saddle |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured Centre leaf |2.4.B.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed |5.3.6 |a| |i|| | 1 |
| Rear Electrical wiring likely to drag on the ground |4.11 |a| |iii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step at |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed at |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced main chassis at |7.1.1 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above fuel tank holed |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed at |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at strut holed |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced LOWER CAB (7.1.1 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CENTRE X MEMBER AT HANDBRAKE LEVER (6.1.1 (c) (i)) | 1 |
| Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement d bushes on axcle |2.4.G.2| | 1 |
| Nearside Rear Tie bar/rod has excessive play in a pin/bush drop link |2.4.G.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle main chassisholed |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner step holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at cab and n/s |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill at |5.2.6| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering X MEMBER AT HANDBRAKE MOUNT (6.1.1 (c) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced X MEMBER AT CAB (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering X MEMBER AT HANDBRAKE MOUNT (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUT RIGGER (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUT RIGGER (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER STEP TO CAB (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER STEP TO CAB (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING AT ROAD WHEEL (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced PANEL AND X MEMBER (6.1.1 (c) (i)) | 1 |
| Brake cable damaged FRONT HALF CABLE BROKEN (1.1.15 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step holed (7.1.1 (a) (i)) | 1 |
| Rear Leaf spring fractured both at spring eyes (5.3.1 (b) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis above front subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outrigger in sveral places (5.3.6 (a) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side foot and handbrake efforts low (1.4.1 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (inner wing area) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (inner wing area) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor (5.3.6 (a) (i)) | 1 |
| Offside Front Leaf spring to axle securing nut missing |2.4.B.7b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shock absorber |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shock absoreber |6.1.B.2| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing has a sharp edge (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2| | 1 |
| Stop lamp adversely affected by the operation of another lamp both rear bulbs pos in wrong way around |1.2.1f| | 1 |
| Nearside Rear Brake linkage excessively damaged and seriously weakened |3.5.1e| | 1 |
| Front Body insecure and dangerous to other road users front vehicle grill ,o/s and n/s head lights front wings |6.1.B.1b| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering behind lsv |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner seal |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat mounting point |5.2.6| | 1 |
| Anti-roll bar pin or bush excessively worn rear d bushes (5.3.4 (a) (i)) | 1 |
| Suspension arm ball joint excessively worn both lower (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at strut top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg front of spring |5.3.6 |a| |i|| | 1 |
| Offside Front Direction indicator not working intermitant (4.4.1 (a) (ii)) | 1 |
| Rear Prop shaft bearing excessively worn rear most (6.1.7 (b) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis near rear cross member |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by engine mount |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner wheel arch |2.4.A.3| | 1 |
| Offside Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shocker top mount |2.4.A.3| | 1 |
| Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings And outer seals |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings And inner seal |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion tipper side panel |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion tipper side |6.1.C.1| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured around eye |5.3.1 |b| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front and rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Outer Rear Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion piller by door |6.1.C.1| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Offside Inner Body has a sharp edge caused by corrosion SILL |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings INNER ARCH |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion Sills |6.1.C.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step panel |5.2.6| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill panel/ outrigger and outer sill panel |2.4.A.3| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and jacking point |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger in front of rear spring |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger behind rear spring |6.1.1 |c| |i|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r by load sensor valve |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner outer sill |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by load sensing valve |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both inner sills |6.1.B.2| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i)) | 1 |
| Offside Rear Rear fog lamp not working offside rear fog light not working |1.3.2b| | 1 |
| Offside Stop lamp not working offside brake light not working |1.2.1b| | 1 |
| Offside Indicator tell tale inoperative indicator warning light for offside indicator not working |1.4.A.2a| | 1 |
| Offside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt offside track rod end boot split |2.2.C.1c| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt nearside front lower wishbone arm bush boot split |2.4.G.2| | 1 |
| Offside Body insecure and dangerous to other road users sub frame bolt loose |6.1.B.1b| | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment handbrake requires adjustment (1.1.15 (f)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired step area (6.2.2 (d) (ii)) | 1 |
| Fuel pipe leaking Diesel leak off pipes leaking on top of engine |7.2.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Sharp edges on nearside wing |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Door step corroded within 30 cm of seat mounting incorporating a seatbelt mounting |5.2.6| | 1 |
| Nearside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Service brake imbalanced across an axle 46% |1.2.1 |b| |i|| | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability top chassis bolt missing |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Upper Anti-roll bar linkage insecure nearside rear upper antiroll bar link arm bolt missing |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt offside front lower suspension ball joint dust cover split |2.4.G.2| | 1 |
| Offside Rear Rear fog lamp not working offside rear fog light not working |1.3.2b| | 1 |
| Front Position lamp not working Marker lights (4.2.1 (a) (ii)) | 1 |
| Offside Front Trailing arm locating pin retaining device not properly locked |2.4.G.3b| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt lower arm ball joint |2.4.G.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt lower arm ball joint |2.4.G.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp interfering with indicator |1.1.A.3f| | 1 |
| Offside Front Body panel corroded and likely to cause injury wing...... (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay...... (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch....... (6.2.1 (a) (i)) | 1 |
| Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower step |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis at front of spring hanger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear of spring hanger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis at rear of front spring hanger |5.3.6 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired siezed |1.1.17 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear mounting |5.3.4 |a| |i|| | 1 |
| Central Front Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush BOTH D bushes |2.4.G.2| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing section corroded and holed |6.1.C.1| | 1 |
| Nearside Front Inner brake disc contaminated by grease |3.5.1h| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch x2 |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch x2
|2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill |spring hanger| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill |spring hanger| |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking BRAKE DRUM BACK PLATE CONTAMINATED |3.6.A.1| | 1 |
| Nearside Towbar fixing obviously of an inappropriate size |6.6.2| | 1 |
| Offside Towbar fixing obviously of an inappropriate size |6.6.2| | 1 |
| Nearside Front Windscreen in an unacceptable condition damage and broken (3.2 (c) (i)) | 1 |
| Nearside Rear Direction indicators not in good working order |function impaired| |1.5.1b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner leg above subframe |2.4.A.3| | 1 |
| Offside Front Outer Seat belt webbing significantly weakened Severely Frayed webbing (7.1.2 (b) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner crossmember |2.4.A.3| | 1 |
| Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Parking brake mechanism/associated mounting prescribed area is excessively corroded HANDBRAKE CABLE AND PROPSHAFT MOUNT |3.1.9| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering CROSSMEMBER |6.1.A.1| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering INNER AND OUTER SILLS |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded ANTI ROLL LINK MOUNT/CHASSIS |2.4.A.3| | 1 |
| Inner Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Offside Rear Inner Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both inner sills under van |5.2.6| | 1 |
| Nearside Lower Radius arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Speedometer clearly inoperative responds to accelerator |6.7.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/valance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch/valance |2.4.A.3| | 1 |
| Nearside Electrical wiring insecure along chassis cables hanging down |1.9.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength outer sill |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp Offside & nearside. |1.1.A.3f| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings near spring shackle. |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings crossmember to spring shackle |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Rear crossmember / spring shackle. |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering all marked in chalk |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded all marked |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow chalk |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked in yellow chalk |6.1.B.2| | 1 |
| Prop shaft bearing housing insecure front bearing (6.1.7 (f) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear crossmember |2.4.A.3| | 1 |
| Offside Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Door step area (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Inner arch area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chasis rear spring mount |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine mounting. |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength clossing sill by leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing flitch panel (5.3.6 (a) (i)) | 1 |
| Brake load sensing valve inoperative but ABS functioning lever seized (1.1.17 (c) (i)) | 1 |
| Offside Front Hydraulic brake calliper insecurely mounted bolt loose (1.1.16 (c) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached circlip insecure (5.3.4 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded of rear |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded of rear |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded of rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front hanger |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger |5.3.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hager |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill closing panel |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded plus outer sill |2.4.A.3| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded chassis surpots |5.2.6| | 1 |
| Fuel pipe union leaking excessively or a risk of fire all injectors |6.1.3 |b| |ii|| | 1 |
| Position lamp not working front |4.2.1 |a|| | 1 |
| Rear Exhaust emissions likely to be affected by an induction leak Rear exhaust box has major leak (8.2.2.1 (b)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Offside Front Cab steps so insecure it is likely to cause injury and has corrosion less than 30cm from a load bearing member (6.2.8 (a) (ii)) | 1 |
| Offside Front Inner Floor excessively deteriorated silll deteriorated and holed less than 30cm from a load bearing member (Drivers Seat ) (6.2.4 (a) (i)) | 1 |
| Offside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab |6.1.B.2| | 1 |
| Nearside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by subframe area (5.3.6 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner bay |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner bay |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Engine mounting bracket excessively loose 50% bolts loose or missing (6.1.8 (a) (ii)) | 1 |
| Offside Hazard warning lamps inoperative all lamps on o/s (4.4.1 (e)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear bush delaminated (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear bush split from arm (5.3.4 (a) (i)) | 1 |
| Anti-roll bar pin or bush excessively worn both rear roll bar "D" bushes worn (5.3.4 (a) (i)) | 1 |
| Prop shaft bearing excessively worn 2nd suport bearing worn to excess (6.1.7 (b) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear cross members (6.1.1 (c) (i)) | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn propshaft support bearing |2.4.G.4d| | 1 |
| Nearside Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Centre Front Seat belt attachment fitting fractured |5.2.3| | 1 |
| Offside Front Driver`s airbag missing |5.4.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded midway outrigger. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill panel |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill; |2.4.A.3| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Body has a sharp edge caused by damage MIRROW |6.1.C.1| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded step to inner sill |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill to wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded lower inner bay |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outriggers and spring hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outriggers |2.4.A.3| | 1 |
| Offside Front Inner Suspension arm synthetic bush deteriorated resulting in excessive movement Rear |2.4.G.2| | 1 |
| Power steering malfunctioning very heavy |2.3.3a| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill as marked |5.2.6| | 1 |
| Offside Rear Outer Body has a sharp edge caused by damage wheel arch |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion sill inner and outer |6.1.C.1| | 1 |
| Nearside Brake servo vacuum pipe excessively chafed pipe split in two places and brake pedal is rock hard |3.6.C.1b| | 1 |
| Front Lower Steering column movement between the shaft and steering wheel |2.1.2a| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner chassis (marked in blue) (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (marked in blue) (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (marked in blue - poorly repaired) (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing - inside bonnet area (marked in blue) (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear brush |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front inter sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inter arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inter arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of leaf spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of leaf spring and up in the back of the wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Entrance/exit door defective in operation side door doesn`t open |9.1.1 |a|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded n/s/r inner arch seam x 2 |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing area. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Valve stem seriously damaged split (5.2.3 (j)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mounting area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Shackle mounting area |5.3.6 |a| |i|| | 1 |
| Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced footstep (7.1.1 (a) (i)) | 1 |
| Offside Outer Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible u bolts. (5.3.1 (a) (ii)) | 1 |
| Prop shaft bearing excessively worn 2nd centre prop mount |6.1.7 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger (5.3.6 (a) (i)) | 1 |
| Stop lamp(s) emits other than a steady red light both rear light lenses broken (4.3.3 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floorpan (7.1.1 (a) (i)) | 1 |
| Front Statutory seat belt missing centre stalk missisng |5.1.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at top shocker mount |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill as marked |6.1.B.2| | 1 |
| Nearside Front Macpherson strut inappropriately repaired pinch bolt |2.4.A.2| | 1 |
| Nearside Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing ball joint loose in hub |2.5.B.1a| | 1 |
| Offside Rear Braking system leaking from wheel hub |3.6.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill/arch and inner sill/paneling |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer arch and inner sill/paneling |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill/paneling |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering bay |6.1.A.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill/cab step |5.2.6| | 1 |
| Front Upper Outline marker lamp not working both o/s & n/s lamps |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicator not working intermittent fault |4.4.1 |a| |ii|| | 1 |
| Offside Rear Leaf spring main leaf fractured forward |5.3.1 |b| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced drivers seat base |7.1.1 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both o/s & n/s inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring main leaf fractured eye |5.3.1 |b| |ii|| | 1 |
| Nearside Rear Wheel nut|s| missing stud broken |4.2.A.1e| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint also insecure |2.3.3b| | 1 |
| Nearside Rear Braking system leaking Brake load sensing valve |3.6.A.1| | 1 |
| Nearside Outer Front Side repeater incomplete |1.5.A1b| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch / chassis |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill along length |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded mid inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower cross member by rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under bonnett chassis |2.4.A.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded above rear axle |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box section |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion side body |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion side body |6.1.C.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cab box |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab floor |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab area |6.1.B.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both n/s rear + front chassis mounting points |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded mounting point + floor support by spring hanger mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under inner wing |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member |6.1.1 |c| |i|| | 1 |
| Bumper insecure Both front bumper brackets insecure |6.1.4 |a| |i|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail above axle |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill by spring mount |6.1.A.1| | 1 |
| Anti-roll bar rubber bush deteriorated resulting in excessive movement both o/s n/s fronts |2.4.G.2| | 1 |
| Centre Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting rear, crossmember |6.6.6| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system corroded |1.1.11 |b| |ii|| | 1 |
| Brake performance not tested popped brake pipe on front |1.2.1 |g|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Ball joint has had excessive heat applied |2.2.C.1e| | 1 |
| Offside Front Ball joint has had excessive heat applied |2.2.C.1e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis box section to which load sensing valve is fixed |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded rear spring eye mounting point on rear crossmember |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail in engine bay behind engine mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (spring hanger) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (spring hanger) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is fractured outer sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded lower sill after rear whell |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp both sides all lamps |1.1.A.3f| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch main chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired inner sill front spring mount |5.3.6 |a| |i|| | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner sill front mounting |2.4.A.3| | 1 |
| Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member |6.6.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at sill |2.4.A.3| | 1 |
| Front Bonnet cannot be secured in the closed position Bonnet |8.4.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger areas. |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front inner sill areas | All Chalked | x5 holes |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded In turret areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis areas |x2 holes Chalked| |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Turret areas. |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill &door steep |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded xmeber |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to rear inner sill and step area |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing next to shocker |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing next to shocker |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top moumt |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush both rear d bush |2.4.G.2| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (inner) (5.3.6 (a) (i)) | 1 |
| Nearside Front position lamp|s| not working and offside |1.1.A.3b| | 1 |
| Emissions not tested rear box missing |8.2.1.2 |d|| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing |6.1.2 |a|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis engine mounting |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area as marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Cab steps in such a condition that it is likely to cause injury step/sill area as marked (6.2.8 (b)) | 1 |
| Offside Front Inner Cab steps in such a condition that it is likely to cause injury step/sill area as marked (6.2.8 (b)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area as marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing in several places (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor around spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced doorstep (7.1.1 (a) (i)) | 1 |
| Offside Rear Leaf spring to axle securing nut insecure both u clamps loose |2.4.B.7b| | 1 |
| Offside Rear Leaf spring longitudinally displaced leaf springs displaced |2.4.B.1d| | 1 |
| Electrical wiring insecure front and rear under vehicle |1.9.2a| | 1 |
| Offside Outer Rear Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
| Offside Rear Lower Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Main Chassis Behind rear wheel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings top of chassis above subframe |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Behind rear wheel inner face of chassis |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor behind rear wheel by shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear Hanger |2.4.A.3| | 1 |
| Central Rear Braking system leaking load sensing valve leaking |3.6.A.1| | 1 |
| Fuel tank insecure straps broken (6.1.3 (a) (i)) | 1 |
| Offside Front Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis above axle (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis above axle (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis [in engine bay] (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by brake pipe (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill section |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill section |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch and chassis section. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill section. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER WHEELARCH |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings DOOR STEP AND SILL |6.1.B.2| | 1 |
| Nearside Rear Torque/reaction arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Rear Torque/reaction arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Rear Torque/reaction arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings w/arch |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings w/arch |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush worn (5.3.4 (a) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded under bonnet |3.6.C.3| | 1 |
| All outline marker lamps not working All four, both front and both rear. |4.2.1 |a|| | 1 |
| Nearside Front Passenger`s seat insecure Swivel not locking. |6.2.6 |a| |ii|| | 1 |
| Offside Rear Lower All position lamps not working |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis/inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis to inner quarter |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded end of chassis/valance |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch at rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch at rear |2.4.A.3| | 1 |
| Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wheel arch in several places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch in several places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch in several places |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded under door step in several places |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under door step in several places |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded under rear of sill in several places |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded under rear of sill in several places |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under rear quarter |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded under rear quarter panel |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded extensive corrosion throughout vehicle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded all sill/floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill/inner out rigger |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded innert wing |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded all the way along the back of cab |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded all the way along back of cab |5.2.6| | 1 |
| Front Outline marker lamp not working 2 |4.2.1 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i)) | 1 |
| Fuel system component leaking Engine bay |7.2.3| | 1 |
| Front Brake hose excessively damaged both sides |3.6.B.4d| | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired middle sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most outer sill behind bumper (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill end cap/inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner upper wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill sections (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired filler |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired filler |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired filler |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired filler |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded both ends of spring, and inner arch, inner sill, and chassis rail |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded both ends of spring, inner sill, chassis rail and wheel arch tub |2.4.A.3| | 1 |
| Nearside Rear Position lamp light intensity significantly reduced dim (4.2.3 (a) (ii)) | 1 |
| Offside Rear Position lamp light intensity significantly reduced dim (4.2.3 (a) (ii)) | 1 |
| Offside Front Cab steps in such a condition that it is likely to cause injury excessively corroded (6.2.8 (b)) | 1 |
| Prop shaft flexible coupling excessively deteriorated centre bearing rubber (6.1.7 (d) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear main bush bonding (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded front out rigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded front out rigger |2.4.A.3| | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced engine support x member |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/inner sill |6.1.1 |c| |i|| | 1 |
| Central Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis x member front of axle |6.1.1 |c| |i|| | 1 |
| Central Rear Brake insecure h/brake cable fixing chassis corrosion |1.1.21 |c|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp lamp faulty |4.2.3 |c|| | 1 |
| Offside Front Brake hose excessively damaged fixing broken at o/s chassis |3.6.B.4d| | 1 |
| Nearside Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail for tipper bed |6.1.B.2| | 1 |
| Nearside Front Brake hose inappropriately repaired Brake hose insecure. Has been cable tied but has rub mark not exposing cords |3.6.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing holed |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill corroded and holed |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Step area and inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step and inner sill |2.4.A.3| | 1 |
| Front Fuel system component leaking Pump |7.2.3| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush Both |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Next to comp. load valve. |6.1.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected spring hanger chassis front (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Front Front position lamp|s| not working dip light |1.1.A.3b| | 1 |
| Front Anti-roll bar pin or bush excessively worn offside and nearside (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn offside and nearside (5.3.4 (a) (i)) | 1 |
| Rear Prop shaft joint excessively worn rear uj (6.1.7 (c) (i)) | 1 |
| Nearside Side repeater excessively deteriorated so that it is not visible from a reasonable distance wired up wrong? |1.4.A.2e| | 1 |
| Nearside Brake cable insecure wrong side of shock |3.5.1d| | 1 |
| Nearside Rear Anti-roll bar linkage insecure to chassis |2.4.G.1| | 1 |
| Nearside Rear Trailing arm locating pin locking pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Rear Trailing arm locating pin locking pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Front Windscreen in an unacceptable condition large crack in window (3.2 (c) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting step sill to floor (6.2.2 (d) (i)) | 1 |
| Offside Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting floor to sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Stop lamp adversely affected by the operation of another lamp position light wrong wattage. |bulb too bright| |1.2.1f| | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected broken lense (4.4.1 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Fuel pipe so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
| Offside Body has a projection caused by damage tipper panel |6.1.C.1| | 1 |
| Central Prop shaft flexible coupling excessively deteriorated propshaft centre bearing (6.1.7 (d) (i)) | 1 |
| Rear Fuel tank insecure strap snapped (6.1.3 (a) (i)) | 1 |
| Central Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` dashboard full of clutter- all removed |8.3.1e| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in yellow |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Seat belt damaged (7.1.2 (b) (i)) | 1 |
| Central Prop shaft likely to become detached mounting point corroded (6.1.7 (a) (ii)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill various areas |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner rear quarter |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner rear quarter |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded under sill corroded adjacent to offside rear leaf spring forward mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded offside rear leaf spring rear most mounting area corroded around under / inner wing areas |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear under & outer sill corroded adjacent to nearside rear leaf spring forward mounting |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded nearside rear leaf spring rear most mounting area corroded around under inner wing area |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer & under sill corroded adjacent to seat belt mounting area |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded under sill adjacent to seat belt mounting area |5.2.6| | 1 |
| Body has a sharp edge caused by damage offside door mirror |6.1.C.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front eye section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front eye section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear eye section |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded seal section |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near seat mount |6.1.B.2| | 1 |
| Nearside Track rod end deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded crossmember at cab rear |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded crossmember at anti roll bar mount |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear chassis x3 & o/s center chassis |2.4.A.3| | 1 |
| Front Inner Anti-roll bar has excessive play in a pin/bush both sides |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill damaged and corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected In door shut near strut mounting |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch within strut mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch within strut mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Top shock mounting area |5.3.6 |a| |ii|| | 1 |
| Offside Front Obligatory mirror is incapable of being adjusted to provide an adequate view to the rear |8.1.2b| | 1 |
| Steering wheel in a condition that hampers proper control cover removed |2.1.1| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis arround bump stop area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis arround bump stop area |2.4.A.3| | 1 |
| Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch inner (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn Dbushes (5.3.4 (a) (i)) | 1 |
| Offside Drivers seat insecure pins worn and missing from mechanism (6.2.5 (a) (ii)) | 1 |
| Rear Outline marker lamp missing both side of vehicle (4.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 1 |
| Prop shaft bearing excessively worn rear most support bearing noisy (6.1.7 (b) (i)) | 1 |
| Offside Rear Electrical wiring likely to touch hot or rotating parts |4.11 |a| |iii|| | 1 |
| Suspension spring mounting prescribed area is excessively corroded both sides rear outriggers |front hangers| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides rear outriggers |rear hangers| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch under wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded backing sill step back |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by front of spring |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis by rear of sprig |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded quarter backing sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded quarter backing |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by rear of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis by front of spring |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger to backing sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded backing sill step back |2.4.A.3| | 1 |
| Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced BODY HAS CORROSION OFF SIDE FORWARD OF WHEEL ARCH |6.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL, FWD OF WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ABOVE WHEEL, MARKED WITH YELLOW CHALK (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Rear Lower Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush Rear Bush |2.4.G.2| | 1 |
| Exhaust system not adequately supported joint |7.1.1| | 1 |
| Brake pipe inadequately clipped front to back under bonnet |3.6.B.1| | 1 |
| Fuel tank insecure front bracket corroded |7.2.1| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill / step |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring box section |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring box section |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch / floor |2.4.A.3| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step under van (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step under van (6.1.1 (c) (i)) | 1 |
| Central Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross beam (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt webbing significantly stretched (7.1.2 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside door step (5.3.6 (a) (i)) | 1 |
| Central Parking brake mechanism/associated mounting prescribed area is excessively corroded chassis rail (1.1.21 (e) (i)) | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded innerarch (1.1.21 (e) (i)) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill x 3 |6.1.A.1| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill x 2 |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch x 2 |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill x 2 |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis x 1 |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis x 1 |6.1.A.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill under vehicle |7.1.1 |a| |i|| | 1 |
| Loading door cannot be secured in the closed position SIDE LOADING DOOR |6.4.1| | 1 |
| Loading door cannot be secured in the closed position NEAR SIDE REAR DOOR AT THE BOTTOM |6.4.1| | 1 |
| rear brake recording little or no effort BOTH REAR SERVICE BRAKES |3.7.B.5a| | 1 |
| Nearside Stop lamp has less than 50% of the light sources illuminating poss bulb in wrong |1.2.1b| | 1 |
| Nearside Rear Inner Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bush |2.4.G.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement wont unlock |7.2.4b| | 1 |
| Body component insecure hydraulic hose loose and insecure touching exhaust (6.2.1 (a) (i)) | 1 |
| Body mounting fixings insecure load bed (6.2.2 (c) (i)) | 1 |
| Body mounting fixings missing 2 rear bolts missing (6.2.2 (c) (i)) | 1 |
| Power steering component|s| leaking from a failed seal Steering rack |2.3.3b| | 1 |
| Front Power steering pipe/hose excessively corroded Pipe to pump (2.1.5 (g) (i)) | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp Earthing folt (4.3.3 (b)) | 1 |
| Offside Body component damaged and likely to cause injury door mirror casing missing (6.2.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded brake compesator |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis member by shockabsorber both sides |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis member inner panel |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded doorstep under sill in several places |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded doorstep under sill |5.2.6| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Centre Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2| | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened front |2.4.B.6d| | 1 |
| Front passenger door cannot be opened from outside the vehicle bonnet |6.2.B.1c| | 1 |
| Offside Front Road wheel more than one fixing missing 2 studs missing |5.2.1 |a| |ii|| | 1 |
| Loading door cannot be secured in the closed position both rear |6.4.1| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis swing shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis swing shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis fixed shackle mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor shocker mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor shocker mount |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is inadequately repaired wing |2.4.A.3| | 1 |
| Nearside Front Headlamp insecure due to front end modification |1.7.3| | 1 |
| Offside Front Headlamp insecure due to modification |1.7.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above subframe mount |Marked area| |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in wheel arch by top strut mount |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OFFSIDE SILL |6.1.B.2| | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Body component corroded and likely to cause injury bed mount (6.2.1 (a) (i)) | 1 |
| Nearside Rear Body component corroded and likely to cause injury bed mount (6.2.1 (a) (i)) | 1 |
| Offside Front Body component corroded and likely to cause injury bed mount (6.2.1 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above handbrake cable mount (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s chassis leg outer (6.1.1 (c) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all over chassis and xmember (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength steps all over (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and step all over |6.2.2 |d| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both chassis all over out riggers and inner arches |6.2.2 |d| |i|| | 1 |
| Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both |5.3.4 |b| |ii|| | 1 |
| Central Front Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine mount (5.3.6 (a) (i)) | 1 |
| Stop lamp|s| adversely affected by the operation of another lamp with side lights both sides |4.3.3 |b|| | 1 |
| Front Bumper insecure both sides (6.1.4 (a) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheelarch next to servo (1.1.21 (e) (i)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings complete sill |6.1.B.2| | 1 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Centre Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill various places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chasssie leg |2.4.A.3| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both sides inner and outter sill |2.4.A.3| | 1 |
| Fuel tank insecure both fuel tank strip broken |7.2.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outter sill |5.2.6| | 1 |
| rear brake recording little or no effort o/s n/s |3.7.B.5a| | 1 |
| Nearside Leaf spring linkage pin excessively loose in its bracket u bolts to axle |2.4.B.3a| | 1 |
| Drive shaft uj which forms part of the suspension has excessive play in a universal joint bolt loose inscure |2.4.G.4b| | 1 |
| Driver`s seat insecure Base mounts loose |6.2.A.1| | 1 |
| Nearside Rear Seat belt insecurely fixed to the seat Receptacle bolt loose |5.2.1a| | 1 |
| Offside Outer Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Exhaust has a major leak of exhaust gases center |7.1.2| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement inner rear bush |2.4.G.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed within 30cm of front leaf spring mounting |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill within 30cm of mount |5.2.6| | 1 |
| Emissions not tested due to an oil leak (8.2.2.2 (e)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis under bonnet |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Inner and outer sills |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Behind wheel |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to sill |6.1.B.2| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Leaf spring mounting point and surrounding box sections |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Leaf spring mounting point and surrounding box sections |5.3.6 |a| |ii|| | 1 |
| Nearside Front Service brake excessively binding Wheel bearing not tested |1.2.1 |f|| | 1 |
| Offside Front Service brake excessively binding Wheel bearing not tested |1.2.1 |f|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (behind wheel) (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near spring shackle (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis(behind rear wheel) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired wheel arch(no weld to bottom of patch) (5.3.6 (a) (i)) | 1 |
| Emissions not tested to much smoke (8.2.2.2 (e)) | 1 |
| Nearside Seat belt likely to become detached in the event of a collision step |7.1.1 |a| |ii|| | 1 |
| Fuel system component leaking no 3 injector |7.2.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front mounting rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front mounting rear spring |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded shackle area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Offside Rear Brake pipe inadequately supported over axle |3.6.B.1| | 1 |
| Offside Front Lower Body has a sharp edge caused by corrosion inner sill step |6.1.C.1| | 1 |
| Offside Rear Outer Body has a sharp edge caused by corrosion skin sill |6.1.C.1| | 1 |
| Nearside Inner Body has a sharp edge caused by corrosion centre sill outrigger mount |6.1.C.1| | 1 |
| Nearside Rear Lower Body has a sharp edge caused by corrosion rear outrigger below spring mount |6.1.C.1| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill section |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill section |5.2.6| | 1 |
| Nearside Rear Leaf spring fractured front anchor point |2.4.B.1a| | 1 |
| Offside Rear Leaf spring fractured front anchor point |2.4.B.1a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear member |2.4.A.3| | 1 |
| Nearside Inner Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Inner Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Rear Upper Position lamp not working OFFSIDE LENS ALSO SMASHED. |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Upper Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Front Prop shaft flexible coupling so deteriorated it is likely to fail |6.1.7 |d| |ii|| | 1 |
| Offside All position lamps not working SIDE MARKERS |1.1.A.3b| | 1 |
| Nearside All position lamps not working SIDE MARKERS |1.1.A.3b| | 1 |
| Offside Rear Direction indicators incorrect colour SHOWING WHITE LIGHT |1.4.A.2f| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light SHOWING WHITE LIGHT |1.3.2e| | 1 |
| Nearside Seat belt anchorage likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded front and rear fixing points |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded front and rear fixing points |2.4.A.3| | 1 |
| Brake pedal anti-slip provision incomplete worn though on edge |3.3.A.1b| | 1 |
| Front Exhaust system not adequately supported hanger not connected |7.1.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer lower sill |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill and chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer lower sill |5.2.6| | 1 |
| Lower engine mounting deteriorated resulting in excessive movement engine |6.1.D.1a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded engine bay chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded within 30mm of suspension mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded within 30cm of suspension mount |5.3.6 |a| |i|| | 1 |
| Offside Front Brake prescribed area is excessively corroded chassis coroded within 30cm of brake hose fixing (1.1.21 (e) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis coroded within 30cm of suspension rear mount. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis coroded within 30cm of front suspension mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Anti-roll bar locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Front Statutory seat belt missing seat belt stalk missing |5.1.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger front most |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger rear most |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis front most spring mounting |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis front most spring mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger rear most |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in front of rear spring *2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded upper shock mount area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded most forward spring mount chalked |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg, top side |2.4.A.3| | 1 |
| Nearside Obligatory mirror missing mirror glass missing |3.3 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Front Inner Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Central Exhaust shield missing where fitted as original equipment creating a risk of fire |6.1.3 |e|| | 1 |
| Central Exhaust has a major leak of exhaust gases corroded |6.1.2 |a|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to door step corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to door step corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Leaf spring fractured front shackle |2.4.B.1a| | 1 |
| Offside Rear Body panel corroded and likely to cause injury lower side panel outer and inner (6.2.1 (a) (i)) | 1 |
| Front Anti-roll bar cracked |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front of spring |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear of spring |5.3.6 |a| |ii|| | 1 |
| Central Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected x member |5.3.6 |a| |ii|| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail top |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing by upper suspension mounting point. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing under wheel arch. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing under wheel arch. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill backing, front to rear. |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near shocker marked yellow |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Road wheel more than one fixing missing All whells (5.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp showing white light to the rear lens damaged |4.2.3 |a| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger and inner panel |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger and inner panel |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by box section |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by box section |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above bump stop |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings above bump stop |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch by shock absorber |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush ball joint |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill to step excess corrosion |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step excess corrosion |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear sill/outrigger |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing in two places (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner side (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner to outer sill |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded top inner wing |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2 Places |6.1.1 |c| |i|| | 1 |
| Brake performance not tested Due To Brake Pipe Condition |1.2.1 |g|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/F INNER ARCH |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s step |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis end |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis end |6.1.B.2| | 1 |
| Offside Front Lower Front suspension retaining device ineffective |2.5.A.4| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded CENTRE OF CHASSIS |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OF CHASSIS |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILL |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTTER SILL |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing by engine mount |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill chassis |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired sill front leaf spring mounting |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded rear panel inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill rear panel |2.4.A.3| | 1 |
| Additional braking device inoperative brake compensator has restricted novement |1.5 |b|| | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement Both Sides |2.4.G.2| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp hazard / indicator |1.1.A.3f| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn rear wishbone bush detached from spindle |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis area @ spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/chassis area @ spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step area |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step area |5.3.6 |a| |i|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine tested to plated limit of 0.75 1/m |8.2.2.2 |b|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber top mounting inner wheel arch |2.4.A.3| | 1 |
| Nearside Vehicle structure is fractured and structural rigidity is significantly reduced chassis rear off cab (6.1.1 (a) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced chassis rear off cab (6.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor by inner step (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor by inner step and inner step (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by front leafspring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember by leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch strut top mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch by engine subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch strut top mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch subframe mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail bolt loose |5.3.3 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing /chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cab floor to chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings tipper pivot |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings tipper pivot |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded above subframe |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top below servo |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing loose bolt or worn bar |2.4.G.2| | 1 |
| Offside Suspension arm rubber bush deteriorated resulting in excessive movement wishbone bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner a both bottom patch (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Leaf spring has excessive wear in an anchor pin and/or bush forward bush |2.4.B.2| | 1 |
| Nearside Front Body panel corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Behind drivers seat in floor |5.2.6| | 1 |
| Offside Rear Leaf spring seriously weakened |5.3.1 |b| |i|| | 1 |
| All outline marker lamps with a multiple light source more than 1/2 not functioning front (4.2.1 (a) (ii)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion outer arch |6.1.C.1| | 1 |
| Fuel system component leaking pump area (6.1.3 (b) (i)) | 1 |
| Emissions not tested fuel leak (8.2.2.2 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under engine mount (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid chassis (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount front arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis shock top mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill to outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner side (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis innerside by brake comp (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength very rear out rigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength very rear outrigger (5.3.6 (a) (i)) | 1 |
| Brake performance not tested not done chassis may not cope in rollers (1.2.1 (g)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper chassis next to engine mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg large area |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and full of filler large area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger front of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear of spring |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear of spring |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, door step (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, door step (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay near gear box mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay near engine mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |rear of spring| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |front & rear of spring| |2.4.A.3| | 1 |
| front brakes release unevenly offside late to apply |3.7.B.4| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both sides mid chassis (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering rear subframe mount both sides |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded spring front hanger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front and rear hanger |2.4.A.3| | 1 |
| Stop lamp(s) not working both stop lamps n/w (4.3.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength REAR LEAF SPRING (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded passenger floor holed underneath seat |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis member ,next to front subframe mounting |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 close to leaf spring mount |6.1.B.2| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion panel |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion panel |6.1.C.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner panel |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings box next too leaf spring mount |6.1.B.2| | 1 |
| Front Supplementary restraint system warning lamp indicates a fault |7.1.6 |a|| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill under sliding door |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering cross member in 2 places |6.1.A.1| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement backbush |2.4.G.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch floor |6.1.B.2| | 1 |
| Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Inner Front coil spring fractured |2.4.C.1a| | 1 |
| Front Headlamp switch insecure |1.7.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leaf ancourage |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf ancourage |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded out rigger chasiss area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill jacking area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer wheelarch and inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Direction indicator not working affecting tail |1.4.A.2c| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings x 2 |6.1.B.2| | 1 |
| Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid wheel cylinder (1.1.16 (b) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind wheel close to coil spring mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced near crane mounting point (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced near crane mounting point (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced large hole in chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rust hole in front of rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near chassis on cab (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chasiss (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal pump |2.3.3b| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis, both sills, out riggers, cross members front & rear |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner seal |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear wheel arch |6.1.B.2| | 1 |
| Offside Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Brake pipe at imminent risk of failure or fracture across bulk head |1.1.11 |a|| | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn and bolt loose/siezed (5.3.4 (a) (i)) | 1 |
| Offside Front Brake pipe likely to become detached or damaged insecure (1.1.11 (d) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn insecure (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn insecure (5.3.4 (a) (i)) | 1 |
| Offside Parking (secondary brake) on a single line braking system grabbing severely (1.3.1 (c)) | 1 |
| Nearside Rear Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under bonit |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing in various places |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing strut top |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill to floor alway down to rear spring anchor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted sill to floor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis around shackle in various places |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis around spring shackle in various places |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis above & behind tow bar mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted out rigger & chassis around spring shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded out rigger behind wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis in varios places around anchor |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis & out rigger around spring anchorage |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded iner wing |2.4.A.3| | 1 |
| Nearside Rear Lower Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step, various places of excessive corrosion |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis , within 30cm of subframe mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bushes |2.4.G.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by subframe mounting |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sil |6.1.B.2| | 1 |
| Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.4.G.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch and end of sill area |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill close to filler pipe |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded engine bay corroded |2.4.A.3| | 1 |
| Stop lamp not working all lights |1.2.1b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering @ wheel arch |6.1.A.1| | 1 |
| Front Brake pipe inadequately clipped in engine bay |3.6.B.1| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch/ wing |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded cab chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded cab chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor to inner wheel arch by shocker mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Within 12" of rear spring hanger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Out rigger behind O/S/R wheel |2.4.A.3| | 1 |
| Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded Chassis above axle |3.3.A.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing under bonnet |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch/floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill & closing panel |2.4.A.3| | 1 |
| Nearside Front Front passenger door does not latch securely closed (6.2.3 (a)) | 1 |
| Offside Front Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger |shock absorber| |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger at rear |2.4.A.3| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill holed (half way along vehicle.) (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inside wheel arch. (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Floor and inner panel. (6.2.2 (d) (ii)) | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside centre chassis rail outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor / inner flitch |2.4.A.3| | 1 |
| Offside Front Brake pipe inadequately supported metal |3.6.B.1| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired doorstep outer sill |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front inner flitches |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear / rear chassis rail outriggers |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded rear cross member in several places |2.4.A.3| | 1 |
| Offside Front suspension has excessive play in a track control arm inner bush Rear bush |2.5.B.2b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis through wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail. |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner flitch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Suspension mounting. |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Suspension mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Out rigger |6.1.B.2| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system to rear |1.1.11 |b| |ii|| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system to rear |1.1.11 |b| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind seat (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor behind seat (7.1.1 (a) (i)) | 1 |
| Nearside Obligatory mirror missing wing |8.1.1| | 1 |
| Fuel system component leaking fuel pump area badly leaking |7.2.3| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded strut top mount area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing areas |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded strut top mount area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area and front chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill areas front end rear spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill areas front end rear spring |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sills floor areas rear back panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sills /floor areas /inner back panels |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement back bush |2.4.G.2| | 1 |
| Brake valve leaking comp valve |3.6.A.1| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded rear comp valve |3.3.A.2| | 1 |
| Suspension spring mounting prescribed area is excessively corroded inner and outer sills both sides |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded door step |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear cross box section |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded rear arches |2.4.A.3| | 1 |
| Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/floor |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area is inadequately repaired both outer sills (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step and inner sill (5.3.6 (a) (i)) | 1 |
| Front Direction indicator not working both (4.4.1 (a) (ii)) | 1 |
| Central Rear Prop shaft bearing excessively worn central and rear |6.1.7 |b| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheelarch to floor |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis under bonnet (6.1.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under wheel arch. gearbox mount (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced inner wing/flitch plate (6.1.1 (b) (ii)) | 1 |
| Fuel tank insecure tank securing strap almost corroded through (6.1.3 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in inner sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sil holed with corrosion below drivers door |5.3.6 |a| |i|| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Seam between inner sill and step holed/Corroded. |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings just at tank area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings looking from top under servo area |6.1.B.2| | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength centre |5.3.6 |a| |i|| | 1 |
| Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt n/s/f bottom ball joint cover split |2.4.G.2| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint metal p/steering rack pipes leaking |2.3.3b| | 1 |
| Nearside Rear Upper Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Out rigger box section. |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor seat mounting. |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door shut. |6.1.1 |c| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases Silencer. |6.1.2 |a|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill/step floor |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step to back of sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step to floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength center back of sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength step to back of sill (5.3.6 (a) (i)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor by handbrake cable (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill to inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step 3 places |5.2.6| | 1 |
| Lower Fluid leaking continuously posing a serious risk to road safety (8.4.1 (a) (ii)) | 1 |
| Nearside Rear Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured shock absorber mounting |2.4.A.3| | 1 |
| Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Sill |6.2.2 |d| |i|| | 1 |
| Offside Upper Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Nearside Front Upper Brake pipe inadequately supported bulk-head in engine bay |3.6.B.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x4 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 |5.3.6 |a| |i|| | 1 |
| Offside Rear Body has an unsafe modification Sharp edge |6.2.1 |d| |i|| | 1 |
| Steering rack gaiter missing or no longer prevents the ingress of dirt Nearside & Offside (2.1.3 (g) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Nearside Inner Rear Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Body component damaged and likely to cause injury wing |6.2.1 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is severely distorted x2 |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded sill,step |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn Rear Bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn Rear Bush |5.3.4 |a| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis box section in engine bay is rotten |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis by bump stop |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cab floor/step (7.1.1 (a) (i)) | 1 |
| Electrical wiring insecure and in contact with sharp edges wires for horn (4.11 (a) (ii)) | 1 |
| Rear Outline marker lamp missing nearside and offside (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced B post cracked by door striker plate |7.1.1 |a| |i|| | 1 |
| Nearside Rear Upper Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Brake load sensing valve defective and function impaired mounting bracket distorted |3.6.E.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded outer sills |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie holed |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wing floor holed |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing floor holed |2.4.A.3| | 1 |
| Nearside Rear Rear fog lamp lens defective such that emitted light is adversely affected white |4.5.1 |b| |ii|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area |6.1.1 |c| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both sides |7.1.1 |a| |i|| | 1 |
| Nearside Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 1 |
| Offside Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced O/S/F sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill/step |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded spring front mount |2.4.A.3| | 1 |
| Offside Rear Exhaust silencer likely to become detached bracket not conected |8.1.1 |b| |ii|| | 1 |
| Nearside Front Steering rack has excessive free play detected at the steering wheel |steering rack fitted| rack end |2.3 |a| |i|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength shackle bracket mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear most spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Front Outer Brake pipe inadequately supported |3.6.B.1| | 1 |
| Fuel tank insecure front bracket broken |6.1.3 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Cross member area as marked. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Out rigger area. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Out rigger area as marked. |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis as marked - engine mount area |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis - as marked wheel arch area |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail - as marked, through wheel arch area |6.1.A.1| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill- body |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rigger |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing under arch |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner lower arch -body |6.1.B.2| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill and wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outwrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded quarter panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill and wheel arch |2.4.A.3| | 1 |
| Nearside Front Macpherson strut insecure bottom bolt missing |2.4.G.1| | 1 |
| Centre Brake rod has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 3 x holes marked in chalk (floor) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 6 x holes including floor and chassis marked in chalk. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected Wheel arch (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded top strut mount |2.4.A.3| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings spring hanger corroded |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion spring hanger mount |6.1.C.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger mount |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing [inside wheel arch] corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing [inside wheel arch] |5.3.6 |a| |i|| | 1 |
| Electrical wiring insecure harness near battery |1.9.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to wheel arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill, [shackle mount ] |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger corroded next to drivers step (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger corroded next to drivers step (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch corroded next to coil spring mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded within 30cm of leaf spring (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded within 30cm of leaf spring (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded step holed |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded step holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis and rear cross member holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch / floor holed |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger corroded/ holed |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Chassis rail is heavily corroded/ holed |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Lower swivel |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint excessively worn Lower swivel |5.3.4 |a| |i|| | 1 |
| Offside Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Fuel cap/sealing device missing temporary fuel cap fitted |6.1.3 |b| |i|| | 1 |
| Emissions not tested due to oil leak and not knowing condition of engine |8.2.2.2 |e|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury tail gate pin |6.2.1 |a| |i|| | 1 |
| Front Body component damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Rear Body component likely to become detached upper tail gate pin missing |6.2.1 |a| |ii|| | 1 |
| Body insecure and dangerous to other road users bonnet insecure |6.1.B.1b| | 1 |
| Nearside Front Seat belt missing stalk missing (7.1.2 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner step area (6.1.1 (c) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded through (7.1.1 (a) (i)) | 1 |
| Nearside Rear Leaf spring to axle fixings loose to the extent that relative movement is visible spring hitting body at rear (5.3.1 (a) (ii)) | 1 |
| Seat belt buckle missing (7.1.2 (d)) | 1 |
| Offside Front Anti-roll bar linkage missing |5.3.3 |a| |ii|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sills |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel |6.2.2 |d| |i|| | 1 |
| Nearside Front Position lamp not working top cab marker |4.2.1 |a|| | 1 |
| Offside Front Upper Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded centre sill |2.4.A.3| | 1 |
| Nearside Front Fuel tank insecure Strap broken |7.2.1| | 1 |
| Offside Rear Leaf spring splayed and fouling Spring too long and damaged caused by hitting crossmember |2.4.B.1c| | 1 |
| Offside Rear Exhaust system not adequately supported Rubber mounting missing |7.1.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Below passenger door |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Below drivers door |6.1.B.2| | 1 |
| Central Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor holed at rear of gearbox above prop shaft |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S rear cross member at spring hanger rotten and holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of rear spring mounting point rotten and hole |6.1.B.2| | 1 |
| Electrical wiring deteriorated and bare wires exposed under bonnet |1.9.2c| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area after rear wheel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area after rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill area before rear wheel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis/bump stop area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength chassis/bump stop area |2.4.A.3| | 1 |
| Nearside Outline marker lamp not working x 2 (4.2.1 (a) (ii)) | 1 |
| Loading door likely to open inadvertently or not remain closed in the case of a sliding door (6.2.3 (b) (i)) | 1 |
| Rear All position lamps adversely affected by the operation of another lamp BOTH SIDE (4.2.3 (c)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired step (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering front next to load sensing valve |6.1.A.1| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Front Tie bar/rod has excessive play in a ball joint track rod end |2.4.G.2| | 1 |
| Offside Front Floor excessively deteriorated floor and step |6.2.4 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer box as marked (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box chassis as marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch corroded as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced inside ofchassis |6.1.1 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger |6.1.1 |c| |i|| | 1 |
| Fuel tank insecure rear strap missing |7.2.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at arch (6.1.1 (c) (i)) | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Offside Outer Suspension spring mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded center out rigger |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded center out rigger |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded center sill |2.4.A.3| | 1 |
| Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.13.6| | 1 |
| Centre Front Brake clevis joint has restricted free movement |3.5.1i| | 1 |
| Passenger`s seat cannot be secured in the upright position. |6.5.15| | 1 |
| Offside Rear rear brake recording little or no effort |3.8.A.4a| | 1 |
| Offside Rear Lower Body has sharp edges or projections caused by corrosion or damage making the vehicle dangerous to other road users |6.5.10| | 1 |
| Front Outline marker lamp not working Both upper |4.2.1 |a|| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing area (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis area central (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill behind wheel arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner footwell area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner footwell area |5.2.6| | 1 |
| Offside Steering arm has relative movement at its fixings outer link end |2.2.B.1h| | 1 |
| Windscreen damaged and affecting the driver`s view of the road cracked zone a |3.2 |a| |ii|| | 1 |
| Nearside Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Wheel Arch Rusty and Holed |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded Sill Rusty and Holed |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill Rusty and Holed |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion Step Rusty and Holed |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner Wheel Arch Rusty and Holed in Various Places |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel Arch Rusty and Holed |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rail Corroded |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sping mouthing |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis x3 |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis x4 |6.1.A.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded 3 places |2.4.A.3| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Front Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Nearside Front Entrance/exit door ???door open` warning device inoperative |6.2.C.3| | 1 |
| Nearside Seat belt retracting mechanism defective 1st row |5.2.5b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded behind bumper |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded behind bumper |5.2.6| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle sliding door not open from out side |6.2.B.1c| | 1 |
| Driving control|s| clutch pedal anti-slip provision worn smooth. worn |6.8.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbond back bush |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement wishbond back bush |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch excessive rusty |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under driver step excessive rust holes |6.1.B.2| | 1 |
| Nearside window|s| missing sliding door window missing |6.9.2| | 1 |
| Nearside Rear Seat belt retracting mechanism defective 1st row |5.2.5b| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger & inner sill |6.1.B.2| | 1 |
| Drive shaft uj which forms part of the suspension has an incorrectly seated universal joint flange |2.4.G.4c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded quarter pannel |2.4.A.3| | 1 |
| Offside Rear Body has a projection caused by corrosion sill |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |inner+outer| sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill and wheel arch |2.4.A.3| | 1 |
| Nearside Inner Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp |1.1.6f| | 1 |
| Nearside Front Front suspension has excessive play in an outer ball joint to suspension arm |2.5.B.2a| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis member front of spring visable through wheelarch |2.4.A.3| | 1 |
| Central Lower Engine mounting damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills, spring anchor area |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills, spring anchor area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill, spring shackle area |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing/chassis area |5.3.6 |a| |i|| | 1 |
| Offside Front Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Front Engine mounting damaged or deteriorated resulting in excessive movement front lower stabilizer (6.1.8 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner/outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outridger |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis above bumpstop |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded chassis above bumpstop |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch/chassis |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch / floor pan |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch / floor pan |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch / chassis rail |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch / door step |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch / chassis rail |2.4.A.3| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back panel inner |6.2.2 |d| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner engine bay chassis rail / engine mount |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring mtg |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail |top Shock absorber mtg| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Chassis rail |top Shock absorber mtg| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front of rear spring mtg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner chassis rail |viewed from under then vehicle| |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail view from under wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of spring outrigger |2.4.A.3| | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn all as marked (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn rear bush as marked (5.3.4 (a) (i)) | 1 |
| Emissions not tested unable to open bonnet (8.2.2.2 (e)) | 1 |
| Rear Upper Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Seat belt retracting mechanism defective drivers |5.2.5b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/door step |6.1.B.2| | 1 |
| Brake performance not tested brake fluid leak |3.7.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shackle mount |2.4.A.3| | 1 |
| Front Body has a projection caused by corrosion both side. |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured lower shock mount |2.4.A.3| | 1 |
| Rear Anti-roll bar has excessive play in a pin/bush nearside and offside |2.4.G.2| | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CORRODED THROUGH ON UPPER SECTION |6.1.1 |c| |i|| | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CORRODED THROUGH ON UPPER SECTION |6.1.1 |c| |i|| | 1 |
| Nearside Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Offside Rear Emergency exit door cannot be opened from outside the vehicle |6.2.D.1a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch marked |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked |6.1.B.2| | 1 |
| Front Upper Fuel system component leaking front engine |7.2.3| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings near the rare shock |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings footwell |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings foot well |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings behind the wheel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings behind the wheel |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind subframe bolt |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected x3 |5.3.6 |a| |ii|| | 1 |
| Nearside Seat belt not functioning as intended not bolted to the vehicle (7.1.2 (c)) | 1 |
| Nearside Front Service brake excessively binding not releasing immediately after brake application (1.2.1 (f)) | 1 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system under the wheel arch (1.1.11 (b) (ii)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis crossmember between the rear axle and spare wheel excessively corroded and weakened on the nearside (6.1.1 (c) (i)) | 1 |
| Nearside Rear Leaf spring main leaf fractured broken at the front spring eye (5.3.1 (b) (ii)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength under the wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded multiple areas of corrosion |5.2.6| | 1 |
| Offside Front Road wheel fixing loose |5.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner step/sill/floor |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded wheel arch rear |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner /outer sill and step |2.4.A.3| | 1 |
| Rear Lower Brake load sensing valve seized |3.6.E.3| | 1 |
| Nearside Rear Braking system leaking back plate wet |3.6.A.1| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury drop side |6.2.1 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury drop side |6.2.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step near seat mount |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded innersill by leaf spring |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded floor chassis |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded chassis by leaf spring |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded chassis by leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded floor chassis |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded side of chassis by shock absorber mount |2.4.A.3| | 1 |
| Nearside Upper Rear reflector not red in colour |1.5.1d| | 1 |
| Offside Upper Rear reflector not red in colour |1.5.1d| | 1 |
| Centre Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering chassis leg upper/lower/sides holed (6.1.1 (d) (ii)) | 1 |
| Nearside Front Inner Integral body structure inadequately repaired such that it is likely to adversely affect braking or steering wing (6.1.1 (d) (ii)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and upper wheel arch holed (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced and upper wheel arch holed (6.1.1 (d) (i)) | 1 |
| Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected repair is poor and chassis is split/holed (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cross member holed near drop link bolt (5.3.6 (a) (i)) | 1 |
| Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.2| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Brake pipe leaking underbody |3.6.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner cill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch to boot floor |2.4.A.3| | 1 |
| Front Power steering ram|s| leaking from a failed component Steering rack |2.3.3b| | 1 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended no wiring to tow bar |1.9.4| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step corrosion |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cab step corrosion |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner rear still close to front spring hanger |6.1.B.2| | 1 |
| Offside Driver`s view of an obligatory external mirror materially affected by an obstruction cover in tape |3.1 |a| |ii|| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner near side cab step corrosion marked with chalk 2 small areas |6.1.B.2| | 1 |
| Offside Front Braking system leaking brake pipe to brake hose connection joint |3.6.A.1| | 1 |
| Rear Braking system leaking load sensing valve |3.6.A.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside around to offside rear |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Leaf spring with an unsafe modification |5.3.1 |d| |i|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside inner and outer sills and offside front inner wheel arch and drivers step |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wing at chassis |2.4.A.3| | 1 |
| Nearside Front Macpherson strut corroded and seriously weakened totally failed internal parts off shock against drive shaft (5.3.3 (b) (i)) | 1 |
| Nearside Outer Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Statutory seat belt of the wrong type. needs to be a 3 point harness |5.1.1| | 1 |
| Statutory seat belt missing both far rear seats |5.1.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both sides center to rear |several areas all as marked| |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired 1 x as marked |2.4.A.3| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering both sides |as marked| |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded near inner sill rear spring hanger |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill front spring hanger inner sill too....inner rear wheel arch o/s/r |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg as marked |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to fuel tank (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch/floor section (6.2.2 (d) (i)) | 1 |
| Offside Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Front engine mounting bracket insecure and likely to fail bracket has caused serious damage to gearbox allowing it to leak oil to excess |6.1.D.1b| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded drivers step |5.2.6| | 1 |
| Offside Rear Upper Bonded suspension unit attachment corroded and seriously weakened bump stop |2.4.F.1c| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring jacking point (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring jacking point (5.3.6 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower inner wing |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired back of sill |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill as marked |2.4.A.3| | 1 |
| Nearside Front position lamp|s| not working Cab Light |1.1.A.3b| | 1 |
| Supplementary Restraint System warning lamp indicates a fault Airbag Light |5.4.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt Bottom Ball Joint |2.4.G.2| | 1 |
| Central Rear Prop shaft bearing likely to break up |6.1.7 |b| |ii|| | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced crossmember at 1st prop bearing (6.1.1 (a) (i)) | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle outer handle (6.2.3 (a)) | 1 |
| Prop shaft bearing excessively worn no.1 (6.1.7 (b) (i)) | 1 |
| Front Anti-roll bar pin or bush excessively worn d bushes (5.3.4 (a) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis behind shock (6.2.2 (d) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is severely distorted inner sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is severely distorted inner sill |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded centre chassis corroded and filled needs welding |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre sill holed and corroded |2.4.A.3| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front crossmember |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near wishbone front mounting |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front spring hanger |6.1.B.2| | 1 |
| Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front cross member and chassis joint |6.1.1 |c| |i|| | 1 |
| Offside Rear Upper Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Passenger`s seat security significantly reduced |6.5.14| | 1 |
| Central Front Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Front Lower Ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Inner Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Outer Rear Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Inner Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Offside Axle beam has excessive vertical movement between stub axle and axle beam |2.5.A.1a| | 1 |
| Offside Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Horn not working (7.7 (a) (ii)) | 1 |
| Brake performance not tested due to brake pipe leaking |1.2.1 |g|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis, shock mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis, shock mount |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s front inner step |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger |leaf spring anchor point| |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s front chassis leg (beside fuel tank) (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s rear outriggers (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner step/floor |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner lower wheel arch/sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired crossmember |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount , back panel |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear mount , back panel |2.4.A.3| | 1 |
| Brake actuating linkage mounting prescribed area is excessively corroded brake load valve mount |3.3.A.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear most leaf spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front most mount |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear most mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing in several places |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing in several places |2.4.A.3| | 1 |
| Electrical wiring insecure front of vehicle to back going to rear lights |1.9.2a| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch several places including under bonnett |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill several places |6.1.B.2| | 1 |
| Nearside Rear Braking system leaking drum |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/ step |2.4.A.3| | 1 |
| Electrical wiring insecure full under side of vehicle |1.9.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded near spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch 4 outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded innersill
|2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (leaf spring mount) (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (leaf spring mount) (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded off the rails and under bumper |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected entire inner wing and turret (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill step and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring fractured Front eye broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Leaf spring fractured Front eye broken (5.3.1 (b) (i)) | 1 |
| Nearside Front Road wheel fixing missing Wheel nut missing. (5.2.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing upper (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x2 places (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch/sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 places (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing and arch |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases exhaust system missing |7.1.2| | 1 |
| Rear Leaf spring slipper insecure both sides |2.4.B.5| | 1 |
| Main beam tell-tale not working on all time |4.9.1 |a| |ii|| | 1 |
| Prop shaft securing bolt loose center |6.1.7 |a| |i|| | 1 |
| Offside Rear Oil leaking excessively from transmission stub axle |8.4.1 |a| |i|| | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength propshaft mount |5.3.6 |a| |i|| | 1 |
| Front Prop shaft likely to become detached |6.1.7 |a| |ii|| | 1 |
| Offside Fuel tank insecure mount |6.1.3 |a| |i|| | 1 |
| Seat belt affected by a damaged seat frame |5.2.1b| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer valance |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis above steering rack |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is fractured chassis behind wheel |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering rear crossmember corroded which supports the brake hoses (6.1.1 (c) (ii)) | 1 |
| Nearside Front Suspension component ball joint excessively worn inner tie rod to steering rack (5.3.4 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases split at cat |7.1.2| | 1 |
| Centre Suspension component mounting prescribed area is inadequately repaired propshaft acorrage |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing top |2.4.A.3| | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel low reading (1.2.1 (a) (ii)) | 1 |
| Offside Rear Service brake has no recorded effort at a wheel low reading (1.2.1 (a) (ii)) | 1 |
| Offside Front Inner Floor excessively deteriorated step/sill (6.2.4 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/step (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above axle (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing by susp leg (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing x3 by suspe leg (5.3.6 (a) (i)) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked with yellow chalk |6.1.B.2| | 1 |
| Access panel cannot be secured in the closed position access panel cannot be opened to inspect required components |6.4.1| | 1 |
| Central Rear Suspension component mounting prescribed area is inadequately repaired cross member above rear axle |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired outer cill not seam welded |5.2.6| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked yellow |6.1.B.2| | 1 |
| Offside Front Body insecure and dangerous to other road users wing insecure |6.1.B.1b| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |door shut| and |rear arch| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |spring hanger| |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |spring hanger| |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |bump stop| |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |bump stop| |6.1.B.2| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis x 2 |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill/ floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch/ floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/ floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded innjer body corner |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill to inner sill |door step| |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering rear out rigger |6.1.A.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded forward out rigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded side panel |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear leaf spring mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind rear leaf spring mount |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded return pipe from rack |2.3.2| | 1 |
| Nearside Front Ball joint has excessive play inner steering joint |2.2.B.1f| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded |6.2.2 |d| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab step corrosion |6.2.2 |d| |i|| | 1 |
| Centre Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded cab step floor section |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis section @ shock top mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis section @ shock mount |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer body panel @ rear spring front hanger area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front hanger area @ inner sill panel/outer sill panel/inner arch/rear panel |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear of inner arch panel@ rear spring rear hanger |2.4.A.3| | 1 |
| Nearside Braking system leaking front to rear |3.6.A.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings @ rear cross member |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch above leaf spring |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings @ floor above leaf spring |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill at jacking point. |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at inner doorstep. |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6| | 1 |
| Nearside Rear Leaf spring missing and directional control affected |5.3.1 |c| |ii|| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inside nsr wheel |6.1.1 |c| |ii|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis underwing area |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step and sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door step and sill inner (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch and floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Floor excessively deteriorated WHEEL ARCH |6.2.4 |a| |i|| | 1 |
| Offside Rear Inner Floor excessively deteriorated WHEEL ARCH TO FLOOR |6.2.4 |a| |i|| | 1 |
| Offside Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine after two full checks |7.4.B.3b| | 1 |
| Offside Steering retaining device insecure on steering coupling to rack |2.2.C.1g| | 1 |
| Nearside Front Macpherson strut insecure in to stub carrier |2.4.G.1| | 1 |
| Rear position lamp|s| not working all rear lights interacting |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is inadequately repaired o/s/f inner doorstep mounting area inadequately repaired |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r inner chasis leg to sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s outer sill distorted and holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s/r outer sill holed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/r inner wheel arch holed |2.4.A.3| | 1 |
| Leaf spring fractured n/s/r leaf spring mounting broken |2.4.B.1a| | 1 |
| Body has a sharp edge caused by corrosion n/s/f wing has sharp edge |6.1.C.1| | 1 |
| Suspension arm has excessive play in a pin/bush o/s/f rear wishbone bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f upper inner arch holed |2.4.A.3| | 1 |
| Front Steering column locking device insecure |2.1.6| | 1 |
| Centre Rear passenger door does not latch securely closed |6.2.B.1a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded step area x2 |5.2.6| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outriggers (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 0/s rear outer sill (5.3.6 (a) (i)) | 1 |
| Rear Lower Suspension component mounting prescribed area excessively damaged significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength both rear spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded OUTER SILL HOLED |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded INNER AND OUTER SILL HOLED |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded CHASSIE LEG HOLED AND CORREDED |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded CHASSIE LEG HOLEDED AND CORREDED |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded REAR FLOOR |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INNER PANEL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded FLOOR HOLED |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded OUT RIGGER |2.4.A.3| | 1 |
| Offside Front Electrical wiring deteriorated, likely to become detached |1.9.2b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor by seat |5.2.6| | 1 |
| Offside Front Steering system has a road wheel fouling a part of the vehicle fowling lower arm on full lock |2.2.D.2a| | 1 |
| Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to chassis |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail too spring hanger |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded INSIDE WHEEL ARCHE X2 |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded INSIDE WHEEL ARCHE |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded step into floor |5.2.6| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember just behind cab, fuel tank mounting |6.1.A.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion step |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion step
|6.1.C.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` various mounds of stuff on dash |8.3.1e| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner wing and lower inner sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded whole width of rear of cab |5.2.6| | 1 |
| Nearside Front Front suspension retaining device missing castelated cap and split pin |2.5.A.4| | 1 |
| Fuel tank insecure 1 x tank strap snapped 1 x only just held up as X-mamber holed and corroded |7.2.1| | 1 |
| Offside Front Body has a projection caused by damage bumper hanging off |6.1.C.1| | 1 |
| Brake load sensing valve has been disconnected and was fitted as standard (3.6.E.2) | 1 |
| Offside Front Track rod end deformed and unserviceable (2.2.C.1d) | 1 |
| Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelhouse (6.1.1 (c) (i)) | 1 |
| Nearside Rear Hydraulic fluid leaking excessively brake drum (8.4.1 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner step |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting x member behind cab (6.2.2 (d) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner and outer step sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting out rigger to sill at the back of the cab (6.2.2 (d) (i)) | 1 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc boot resecured |2.5.C.1a| | 1 |
| Offside Front Headlamp not working on dipped beam replaced h4 bulb |1.7.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer valance |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember in 3 places |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear outer sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded on underside of step |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sil |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel box |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel box |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced step |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering leg |6.1.1 |c| |ii|| | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelarch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced front to rear inner and outer sill areas (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis inner wheel arch (marked) (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail under bonnet (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis nr brake weight valve |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassisby brake compensator |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheel arch and floor |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch and floor |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger and cross member |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring hanger and cross member |6.1.B.2| | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch/door shut |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting panel behind headlamp |6.2.2 |d| |i|| | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch to sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 1/4 panel |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to inner arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre sill |6.2.2 |d| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top area |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i|| | 1 |
| Offside Rear Towbar has excessive damage seriously affecting its strength within 30cm of a towbar mounting |6.1.6 |i| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner |6.2.2 |d| |i|| | 1 |
| Battery insecure and likely to fall from carrier tray rotten |4.13 |a| |ii|| | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted corner missing |6.1.4 |a| |i|| | 1 |
| Offside Rear Bumper damaged and likely to cause injury when grazed or contacted corner missing |6.1.4 |a| |i|| | 1 |
| Nearside Body has a sharp edge caused by corrosion near side sill corroded
off side rear inner flinch corroder |6.1.C.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar mount |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar mount |6.1.B.2| | 1 |
| Offside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing by shock |6.1.B.2| | 1 |
| Offside Front Body has a projection caused by corrosion bumper insure |6.1.C.1| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded rear of cab |3.1.9| | 1 |
| Body component corroded and likely to cause injury nearside & offside side rails of tipper body (6.2.1 (a) (i)) | 1 |
| Body component corroded and likely to cause injury rear tailgate (6.2.1 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear crossmembers x2 corroded to excess - above rear axle (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear chassis by spring shackle mounting point (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit plate value 0.75 (8.2.2.2 (a)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension subframe mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension coil spring mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension anti-roll bar mounting prescribed area |5.3.6 |a| |i|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear cross member above axle 2x spots (6.1.1 (c) (i)) | 1 |
| Inner Fuel system component leaking |7.2.3| | 1 |
| Rear Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Stop lamp not working wrong wattage bulb |5/10 watts| |1.2.1b| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both rear chassis rails |6.1.A.1| | 1 |
| Offside Front Suspension arm insecure ball joint insecure |2.4.G.1| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced as marked (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to anti roll bar link upper (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded box sections supporting front end of spring mount |2.4.A.3| | 1 |
| Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to leaf spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to rear leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by engine mount (6.1.1 (c) (i)) | 1 |
| Stop lamp adversely affected by the operation of another lamp wrong bulbs fitted causing front position light to come on when brake pressed .brake lights are not visible when position lights are switched on. |1.2.1f| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill to wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (within 30 cm of leaf spring mounts) (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (within 30 cm of leaf spring mounts) (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting forward section of wheel arch/body mount - within 30 cm of leaf spring mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting forward section of wheel arch/body mount - within 30 cm of leaf spring mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust system not adequately supported front pipe to centre joint area |7.1.1| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger area at rear |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger area |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded midd outrigger area |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch by top mount |2.4.A.3| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp reverse lights staying on |1.1.A.3f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Front and rear mounting |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mounting to chassis |2.4.A.3| | 1 |
| Offside Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Inner Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (sev places) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassies (sev places) (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced doorpillar (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step and inner ,outer sills |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis. |top| |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis| top| |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush D BUSH |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bulk head |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel well |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturers specified limit LIMIT 0.68 (8.2.2.2 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced ENGINE BAY (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND WHEEL UNDER ARCH LOAD SENSOR AREA (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced BEHIND WHEEL UNDER ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ENGINE BAY AND INNER ARCH (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTRIGGER |6.1.B.2| | 1 |
| Offside Front Vehicle structure has a fracture which adversely affects braking or steering CHASSIS |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WING |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Centre Boxes |6.1.2 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis sub frame mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis under bonnet |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis sub frame mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis spring mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis front and rear spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis front and rear spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch strut top mount |5.3.6 |a| |i|| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded comp mount |1.1.21 |e| |i|| | 1 |
| Fuel pipe leaking injector area |6.1.3 |b| |i|| | 1 |
| Offside Front Upper Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis near fuel tank (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Rear Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Outer Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Emissions not tested excess oil leak |8.2.2.2 |e|| | 1 |
| Nearside Front Upper Side repeater missing |1.4.A.2b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded be hind rear wheel |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded be hind rear wheel |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
| Nearside Rear fog lamp adversely affected by the operation of another lamp |4.5.4 |b|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Windscreen in an unacceptable condition Cracked in line of view (3.2 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg holed under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg holed behind rear wheel (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis holed behind rear wheel (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Inner sill holed and repaired with body filler (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to out rigger holed throughout (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out rigger holed to inner sill throughout corrosion (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Centre inner sill holed close to seat mounting (7.1.1 (a) (i)) | 1 |
| Front Anti-roll bar pin or bush excessively worn Both D bushes worn to excess (5.3.4 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner chassis leg corroded and holed in two places (6.1.1 (c) (i)) | 1 |
| Rear Service brake imbalanced across an axle At 54% (1.2.1 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Door step (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded under step |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded leafspring |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut top |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded drop sill |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded drop sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded drop sill |5.2.6| | 1 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint ball jonit worn |2.5.B.1a| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc cv boot split |2.5.C.1a| | 1 |
| Nearside Rear Lower Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings spring turret |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner wing area |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front & rear outriggers |2.4.A.3| | 1 |
| Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Central Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |2 locations of rust| |6.1.B.2| | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill complete |6.1.B.2| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2| | 1 |
| Exhaust shield missing where fitted as original equipment creating a risk of fire exhaust heat shield loose (6.1.3 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and suspension tower |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion both sides front wings |6.1.C.1| | 1 |
| Nearside Inner Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Nearside Rear Lower Loading door cannot be secured in the closed position |6.2.1 |e|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor by fuel tank / seat mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch by leaf spring mount |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember by leaf spring rear mount |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember by leaf spring rear mount |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step area |6.2.2 |d| |i|| | 1 |
| Speedometer clearly inoperative not correct speed showing |6.7.2| | 1 |
| Offside Loading door likely to open inadvertently or not remain closed side door catch missing and one with no locking plate (6.2.3 (b) (ii)) | 1 |
| Offside Front Body component damaged and likely to cause injury fog lamp broken glass (6.2.1 (a) (i)) | 1 |
| Sub-frame attachment bracket/mounting insecure front frame nut loose |2.4.G.1| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step return (7.1.1 (a) (i)) | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp side light |1.4.A.2h| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting DROP SILL (6.2.2 (d) (i)) | 1 |
| Floor excessively deteriorated ns inner sill, nsr inner wheel arch (6.2.4 (a) (i)) | 1 |
| Offside Outer Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top shock mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded to top mount |2.4.A.3| | 1 |
| Prop shaft bearing housing insecure rear most of 2 |6.1.7 |f| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outter seal |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch marked yellow |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shock top mount area |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at strut top (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing to strut top |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner /outer sill |2.4.A.3| | 1 |
| Nearside Inner Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Windscreen in an unacceptable condition |3.2 |c| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury corroded bed (6.2.1 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury corroded bed (6.2.1 (a) (i)) | 1 |
| Offside Rear Position lamp showing white light to the rear damaged lens (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Body mounting fixings missing mudguard missing (6.2.2 (c) (i)) | 1 |
| Engine MIL inoperative or indicates a malfunction no light (8.2.1.2 (h)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced shock turret (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint Rear bush |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bearing Rear bush |2.4.G.2| | 1 |
| Nearside Steering column shaft has excessive end float Rack end |2.1.3| | 1 |
| Offside Rear Anti-roll bar locating pin insecure broken |2.4.G.3a| | 1 |
| Nearside Rear Leaf spring shackle pin excessively loose in its bracket Rear spring front bush |2.4.B.3a| | 1 |
| Offside Inner Front engine mounting bracket insecure and likely to fail |6.1.D.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis top & inner arch |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill | step| |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |step| |5.2.6| | 1 |
| Brake pedal anti-slip provision worn smooth brake pedal rubber worn out |3.3.A.1b| | 1 |
| Offside Rear Shock absorber has an excessively worn bush Lower rubber bush missing |2.7.4| | 1 |
| Central Exhaust has a major leak of exhaust gases section complete |6.1.2 |a|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger, around existing repair |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/outrigger in wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn trailing bush |5.3.4 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill under B post |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside inner wing inside wheel arch near strut top |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill x2 |2.4.A.3| | 1 |
| Nearside Rear Seat belt likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Offside Rear Seat belt likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Rear Seat belt likely to become detached in the event of a collision middle |7.1.1 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn saddle |5.3.4 |a| |i|| | 1 |
| Prop shaft bearing housing fractured front prop shaft bearing (6.1.7 (f) (i)) | 1 |
| Offside Rear Road wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Anti-roll bar has excessive play in a pin/bush D bushes |2.4.G.2| | 1 |
| Offside Front Brake pipe excessively chafed pipe leading off the master chafing on the bend of bulk head |3.6.B.2c| | 1 |
| Leaf spring eye defective |anchor| spring eye broken bush exposed |2.4.B.1b| | 1 |
| Drive shaft which forms part of the suspension support bearing excessively worn centre bearing bracket lose |2.4.G.4d| | 1 |
| Nearside Windscreen wiper blade missing blade rubber missing |8.2.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering strut tunnel |6.1.A.1| | 1 |
| Offside Front Power steering pump insecure |2.3.6| | 1 |
| Centre Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded near inner valance | rear leaf mount | |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer valance | near rear leaf mount | |2.4.A.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and door step. |6.1.1 |c| |i|| | 1 |
| Offside Body has a sharp edge caused by corrosion inner body sill |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion inner wing and chassis rail under wheel arch |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion chassis rail above rear suspension beam |6.1.C.1| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt ball joint dust cover split |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt ball joint dust cover split |2.4.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger by swinging shackle mount |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner sill near forward spring mount |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded step and inner sill corroded |5.2.6| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing corroded |6.1.C.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill corroded |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing and chassis rail corroded under wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis rail above rear suspension beam |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced lower b post/outer sill area |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced lower c post lower/outer sill area & inner sill area |7.1.1 |a| |i|| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Engine cradle mounting corroded |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to foot step holed |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch holed |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced ffloor |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement rear bush |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi in front of leaf spring |6.1.B.2| | 1 |
| Nearside Front position lamp|s| not working side repeater |1.1.A.3b| | 1 |
| Additional braking device damaged rubber on brake and clutch pedals missing |3.6.I.1| | 1 |
| Steering locking device missing steering lock |2.2.C.1g| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near to suspension mount. |6.1.B.2| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near to suspension mount |6.1.B.2| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine 3.98 1/m |7.4.B.3b| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer sill |6.1.A.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded FLOOR/WHEEL ARCH |2.4.A.3| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch x3 patches |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill to door step |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill to door step |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sills |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at swinging shackle |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at swinging shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded crossmember at swinging shackle |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill at spring anchor |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch/outrigger |2.4.A.3| | 1 |
| Offside window|s| missing |6.9.2| | 1 |
| Offside Outer Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
| Power steering malfunctioning |2.3.1a| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside rear inner sill holed and also under o/s/f step (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger area |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner door edge |5.2.6| | 1 |
| Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill and chassi leg |2.4.A.3| | 1 |
| Nearside Rear Inner Subframe mounting prescribed area is excessively corroded wheel arch near chassi leg |2.4.A.3| | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced broken |1.7.5a| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired outer sill by side door |2.4.A.3| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Emissions not tested Smoke |7.4.B.1| | 1 |
| Power steering pipe|s| or hose|s| leaking On the Rack |2.3.3b| | 1 |
| Offside Front Front suspension has excessive movement at a suspension ball joint insecure |2.5.A.1c| | 1 |
| Fuel system component leaking injector`s |7.2.3| | 1 |
| Nearside Front Seat belt stitching badly frayed outer |5.2.2b| | 1 |
| Offside Front Outer Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Crossmember in 2 places |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger |6.1.B.2| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Front Upper Fluid suspension unit leaking |2.4.D.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch near shocker top mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner /outer sill |2.4.A.3| | 1 |
| Power steering pump drive system defective excessive judder lock to lock |2.3.6| | 1 |
| Centre Rear Seat belt affected by an insecure seat fixing |5.1.B.2b| | 1 |
| Outer Rear Seat belt insecurely fixed to the vehicle structure |5.1.B.2a| | 1 |
| Front Shock absorber has a serious fluid leak |2.6.3| | 1 |
| Windscreen view/condition cracked or damaged which presents a danger to any person on the vehicle. |6.11.2| | 1 |
| Front Headlamp switch faulty |1.2.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Outrigger by spring |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired Inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis rail area |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded compensator valve |3.3.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear spring mount inner arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outridger |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced outridger & step |6.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember |6.1.A.1| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded UNDER BONNET |2.4.A.3| | 1 |
| Offside Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / above rear axle / within 30cm of shock absorber |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / above axle / within 30 cm of shock absorber mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt ball joint in hub |5.3.4 |b| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door pillar striker plate fractured 30 cm seat belt mounting |7.1.1 |a| |i|| | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Offside Statutory seat belt missing |5.1.A.1| | 1 |
| Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced engine crossmember corroded to excess at chassis mounting area |6.1.1 |c| |i|| | 1 |
| Offside Front engine mounting bracket damaged and likely to fail engine bearer/frame corroded to excess holed |6.1.D.1b| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded and outer sill corroded holed |2.4.A.3| | 1 |
| Braking system leaking load sensing valve leaking from piston |3.6.A.1| | 1 |
| Front Obligatory mirror seriously damaged, affecting the rear view door mirrors both |8.1.2a| | 1 |
| Exhaust system not adequately supported rear mounting detached |7.1.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under bonnet (5.3.6 (a) (i)) | 1 |
| Fuel tank insecure rear tank strap corroded through (6.1.3 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter/ valance |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded quarter/ valance |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/ step |5.2.6| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split |5.3.4 |b| |ii|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Corrosion hole above subframe mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded stepsill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear off outersill |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member at anti rollbar link |2.4.A.3| | 1 |
| Centre Exhaust system not adequately supported mountings split |7.1.1| | 1 |
| Rear fog lamp emits a light other than red near side rear lens damaged |1.3.2e| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded anti roll bar linkage / chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded strut mounting / inner wing |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner step repaired from the inside. chassis block missed |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both front upper struts, inner arch |5.3.6 |a| |i|| | 1 |
| Centre Parking brake mechanism/associated mounting prescribed area is excessively corroded cross member by fuel tank |3.1.9| | 1 |
| Nearside Stop lamp|s| missing |4.3.1 |a| |ii|| | 1 |
| Centre Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit *.75Limit* |8.2.2.2 |a|| | 1 |
| Power steering pipe/hose leaking Feed to steering rack corroded & leaking |2.1.5 |a|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill of cab (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded main chassis leg |3.6.C.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill along length |2.4.A.3| | 1 |
| Offside Stop lamp(s) not working poss. bulb in wrong (4.3.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Engine mount are under bonnet (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch chassis rail x2 (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, front leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger, rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cill, rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner cill, front of rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner cill, rear of rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger, rear leaf spring mount area (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both door steps under vehicle |7.1.1 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear valance & rear spring hanger mounting areas |5.3.6 |a| |i|| | 1 |
| Towbar excessively corroded within 30cm of towbar mounting rear valance |6.1.6 |i| |i|| | 1 |
| Suspension component mounting prescribed area is inadequately repaired both front door steps |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Brake prescribed area is excessively corroded and functionality of the braking system is affected |1.1.21 |e| |ii|| | 1 |
| Offside Rear Inner Brake prescribed area is excessively corroded and functionality of the braking system is affected |1.1.21 |e| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch x2 |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch x2
|2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded lower inner door step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear. chalked |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded front.chalked |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front.chalked |2.4.A.3| | 1 |
| Nearside Front Headlamp lens seriously defective Broken (4.1.1 (b) (ii)) | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases back box missing (6.1.2 (a)) | 1 |
| Nearside Emergency exit door cannot be opened from outside the vehicle (9.1.2 (a)) | 1 |
| Fuel system component leaking excessively or a risk of fire filter |6.1.3 |b| |ii|| | 1 |
| Rear Shock absorbers has a serious fluid leak BOTH (5.3.2 (b)) | 1 |
| Rear Inner Anti-roll bar pin or bush excessively worn BOTH (5.3.4 (a) (i)) | 1 |
| Nearside Outer Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Outer Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected leaf spring (5.3.6 (a) (ii)) | 1 |
| Rear Towbar excessively corroded within 30cm of towbar mounting body panel (6.1.6 (i) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i)) | 1 |
| Central Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near side |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer edge |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner edge |6.1.B.2| | 1 |
| Nearside Rear Leaf spring fractured BROKEN |5.3.1 |b| |i|| | 1 |
| Nearside Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring mount/inner sill |2.4.A.3| | 1 |
| Offside Rear Leaf spring fractured front spring mount |2.4.B.1a| | 1 |
| Centre Rear Torsion bar deteriorated by corrosion so that its cross sectional area is reduced and seriously weakened |2.4.E.1b| | 1 |
| Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step to floor |6.1.B.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition exhaust casing spilt |7.1.4| | 1 |
| Body insecure and dangerous to other road users rear body insecure |6.1.B.1b| | 1 |
| Front Body insecure and dangerous to other road users bumpoer insecure |6.1.B.1b| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting box panel |6.6.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering brake load valve (6.1.1 (c) (ii)) | 1 |
| Direction indicators flashing more than 120 times a minute front and rear both sides |1.4.A.2g| | 1 |
| Nearside Body has a projection caused by damage side loading door |6.1.C.1| | 1 |
| Offside Rear Lower Body has a sharp edge caused by corrosion not permanently repaired |6.1.C.1| | 1 |
| Bonnet retaining device excessively deteriorated can not be opened |8.4.2| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded near steering column |2.2.C.1h| | 1 |
| Seat belt anchorage prescribed area is excessively corroded back of cab within 30cm of seat mountings |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis rail , outer x2 ,lower x2 ,inner x1 |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded strut tunnel upper |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail top infront and behind engine mount |2.4.A.3| | 1 |
| Rear Axle has inadequate clearance with the bump stop x2 missing |2.4.A.1a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sring hanger |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded LEG |2.4.A.3| | 1 |
| Nearside Seat belt flexible stalk cable has broken strands |5.2.4b| | 1 |
| Emissions not tested too much oil showing on dipstick (8.2.2.2 (e)) | 1 |
| Central Front Engine mounting bracket damaged or deteriorated resulting in excessive movement mounting x member corroded and holed (6.1.8 (a) (i)) | 1 |
| Rear Emergency exit access blocked (9.1.2 (d)) | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near bump stop |6.1.B.2| | 1 |
| Nearside Rear Bonded suspension unit attachment loose bump stop |2.4.F.1a| | 1 |
| Offside Rear Bonded suspension unit attachment loose bump stop |2.4.F.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Suspension carrier |2.4.A.3| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Leaf spring fractured |5.3.1 |b| |i|| | 1 |
| Brake pedal anti-slip provision incomplete brake pedal rubber |3.3.A.1b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect bulb in wrong |1.8.A.1b| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| track rod end/inner tie rod |2.2.A.1b| | 1 |
| Body has a sharp edge caused by corrosion offside of rear bumper |6.1.C.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` dirty effecting view |8.3.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded in front of wheel |2.4.A.3| | 1 |
| Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wheelarch |3.6.C.3| | 1 |
| Nearside Front Inner Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Offside Front Inner Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Power steering component|s| leaking from rack area |2.3.3b| | 1 |
| Rear Anti-roll bar severely distorted D BUSHES both got excessive movment |2.4.G.1| | 1 |
| Fuel tank insecure tank strap corroded through |7.2.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded at rear of leaf spring, holed and corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear of leaf spring, holed and corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded at front of leaf spring, holed and corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis holed and corroded |2.4.A.3| | 1 |
| Nearside Front Brake pipe inadequately supported at flexi hose |3.6.B.1| | 1 |
| Central Front Prop shaft likely to become detached front prop shaft center bearing mounting excessive rust damage (6.1.7 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to rear shackle bushes x2 |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected engine mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Brake drum contaminated brake fluid leak |1.1.14 |b|| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded Rearmost inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis in front of subframe mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis behind subframe to the side of fuel tank (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis under brake servo (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Rear Tailgate component corroded and likely to cause injury step (6.2.1 (a) (i)) | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded macpherson strut mounting, prescribed area corroded and holed |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is fractured back of cab x2 main chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 1 |
| Driver`s seat insecure on frame |6.2.A.1| | 1 |
| Centre Front Lower Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/arch
|6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember
|6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings corner at out rigger |6.1.B.2| | 1 |
| Brake pipe inadequately clipped fron to rear |3.6.B.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded sill back at front mounting |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre sill back |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded corner valance |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear spring mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis at rear spring mount |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded centre chassis at fuel tank mount |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre sill back |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel acrh/floor |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings yellow chalked |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area under step |6.1.B.2| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rigger spring mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear out rigger |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch to f loor |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded under arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under arch several places |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded under arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp with indicator light |1.1.A.3f| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Front mounting |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside outer sill |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside outer sill |5.3.6 |a| |i|| | 1 |