MOT History from tests of diesel FORD RECOVERYs year 1992

Review the list of common FORD RECOVERY failures below or to perform a specific mot history check on your FORD then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a diesel FORD RECOVERY year 1992 passes without issue)

Based on:2 MOT Tests

Most common failures	No# failures
Offside Front Direction indicator insecure \|1.4.A.2b\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Headlamp aim out of alignment	1
Driver`s seat fore and aft adjustment mechanism not functioning as intended. \|6.2.A.3\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside front brake binding \|3.7.B.1\|	1
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Registration plate issues	1
Emissions not tested \|7.0\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Front Direction indicator insecure \|1.4.A.2b\|	1
Nearside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Headlamp aim out of alignment	1
Driver`s seat fore and aft adjustment mechanism not functioning as intended. \|6.2.A.3\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Offside front brake binding \|3.7.B.1\|	1
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Registration plate issues	1
Emissions not tested \|7.0\|	1

MOT History from tests of diesel FORD RECOVERYs year 1992

Find us on Facebook