Most common failures | No# failures |
---|
Registration plate lamp issues | 5 |
Headlamp aim out of alignment | 5 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
Brakes imbalanced across an axle | 3 |
Horn not working |1.6.2a| | 2 |
Brake pipe excessively corroded | 2 |
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Rear brake application uneven | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Windscreen has damage | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i)) | 1 |
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by prop mounting (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by spring mount (5.3.6 (a) (i)) | 1 |
Brake pedal has no servo assistance |3.3.B.2| | 1 |
Nearside Front coil spring broken |2.4.C.1a| | 1 |
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Brake load sensing valve seized |3.6.E.3| | 1 |
Offside Front Brake hose twisted |3.6.B.4c| | 1 |
Nearside Dropside cannot be secured in the closed position |6.4.1| | 1 |
Offside Dropside cannot be secured in the closed position |6.4.1| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Registration plate issues | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Step |7.1.1 |a| |i|| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
Horn not working (7.7 (a)) | 1 |
Nearside Seat belt retracting mechanism defective (7.1.2 (e)) | 1 |
Nearside Rear Outline marker lamp not working outer light missing (4.2.1 (a) (ii)) | 1 |
Offside Rear Outline marker lamp not working outer light missing (4.2.1 (a) (ii)) | 1 |
Offside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
Position lamp light intensity significantly reduced both upper lights not visable / sun shade blocking lights (4.2.3 (a) (ii)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area x3 (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) | 1 |