| Most common failures | No# failures |
|---|
| Brakes imbalanced across an axle | 3 |
| Registration plate lamp issues | 3 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Registration plate issues | 2 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Headlamp aim out of alignment | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Lower Rear fog lamp not working |1.3.2b| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner under sill adjacent tie arm mount |2.4.A.3| | 1 |
| Front brake application uneven | 1 |
| Windscreen wiper blade insecure | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor front to rear |6.1.B.2| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear crossmember |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Fuel system component leaking at fuel pump |7.2.3| | 1 |
| Rear brake binding | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting cracked inner |2.4.G.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear crossmember |6.1.B.2| | 1 |
| Central Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |