| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 3 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Offside front brake binding |3.7.B.1| | 2 |
| Rear fog lamp not working |1.3.2b| | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Registration plate issues | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Battery insecure |1.9.1| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded both sides outer sills |2.4.A.3| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL AREA CORRODED . |6.1.1 |c| |i|| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Front Outer Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Offside Front Outer Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Fuel system component leaking engine area (6.1.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Cross member (6.2.2 (d) (i)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded sill back and outrigger |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill and sill back |2.4.A.3| | 1 |
| Trailer electrical socket (13 pin) not functioning at all (4.10 (c) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Spare wheel insecure in carrier |6.1.5 |b| |i|| | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced O/S/R sill corroded |6.1.1 |b| |ii|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Fuel tank insecure tank strap broken (6.1.3 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |