Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 22 |
Registration plate lamp issues | 8 |
Rear fog lamp not working |1.3.2b| | 5 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 4 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 4 |
Headlamp aim out of alignment | 4 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 4 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 4 |
Battery insecure |1.9.1| | 4 |
Anti-lock braking system warning lamp indicates an ABS fault | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
Offside Rear Anti-roll bar linkage insecure |2.4.G.1| | 2 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Registration plate issues | 2 |
Offside Rear fog lamp missing |1.3.2a| | 2 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake binding | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
Offside Rear fog lamp insecure |1.3.2a| | 2 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar insecure |2.4.G.1| | 1 |
Rear Exhaust has a major leak of exhaust gases tail pipe, unable to carry out smoke test |7.1.2| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded cross member under radiator |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded cross member under radiator |2.4.A.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp with brake lamp and not working right away |1.4.A.2h| | 1 |
Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Horn not working |1.6.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil (5.3.6 (a) (ii)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil (5.3.6 (a) (ii)) | 1 |
Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil (5.3.6 (a) (ii)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil (5.3.6 (a) (ii)) | 1 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Drop link |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded front cross member |2.4.A.3| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Suspension arm pin or bush likely to become detached Front bush (bolt) (5.3.4 (a) (ii)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn Drop link (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn Drop link (5.3.4 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Brake hose excessively deteriorated | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Fuel cap/sealing device ineffective incorrect cap (6.1.3 (b) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
Front Bumper insecure nearside (6.1.4 (a) (i)) | 1 |
Nearside Front Body insecure to the extent that stability is seriously impaired A pillar corroded & holed (6.2.2 (a) (ii)) | 1 |
Nearside Rear Body insecure to the extent that stability is seriously impaired C pillar top & bottom holed & corroded (6.2.2 (a) (ii)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced boot floor holed & corroded (7.1.1 (a) (i)) | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Fuel system component leaking pump ? |7.2.3| | 1 |
Central Upper Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Electrical wiring insecure and connectors likely to become disconnected Battery terminal |4.11 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced x1 |7.1.1 |a| |i|| | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced x2 |7.1.1 |a| |i|| | 1 |
Front Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Fuel system component leaking excessively or a risk of fire injection pump |6.1.3 |b| |ii|| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out-rigger (5.3.6 (a) (i)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
Offside Rear Road wheel fixing missing stud snapped (5.2.1 (a) (i)) | 1 |
Centre Front Subframe mounting prescribed area is excessively corroded front lower radiator support corroded across it`s whole width |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded front of wheel arch |2.4.A.3| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Rear fog lamp insecure |1.3.2a| | 1 |
Offside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Front brake application uneven | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Offside Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired drop sill (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced split (6.1.1 (c) (i)) | 1 |
Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Central Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting radiator mounting (6.2.2 (d) (i)) | 1 |
Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Body has a projection caused by corrosion Sill |6.1.C.1| | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Suspension arm mounting has an unsafe modification ball joint bold locking pin missing.|castellated nut cotter pin| |5.3.3 |c| |i|| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x2 |6.1.B.2| | 1 |
Central Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure (5.3.4 (b) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Seat belt affected by an insecure seat fixing seat bolt missing |5.2.1b| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember |6.1.B.2| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush `D bush` |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush `D bush` |2.4.G.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |