| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 34 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 22 |
| Headlamp aim out of alignment | 17 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 10 |
| Horn not working (7.7 (a)) | 10 |
| Registration plate lamp issues | 10 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 9 |
| Anti-lock braking system warning lamp indicates an ABS fault | 9 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 8 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 7 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 7 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 7 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 7 |
| Brake pipe excessively corroded | 7 |
| Windscreen washer not working | 7 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 7 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 6 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 6 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 6 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 6 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 5 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 4 |
| Registration plate issues | 4 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 4 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 3 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Nearside Front Shock absorbers has a serious fluid leak | 3 |
| Rear brake disc in such a condition that it is seriously weakened | 3 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 3 |
| Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 3 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 3 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 3 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Power steering inoperative (2.1.5 (c) (i)) | 3 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 3 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Horn not working (1.6.2a) | 3 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 2 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Oil leaking excessively from transmission (8.4.1 (a) (i)) | 2 |
| Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 2 |
| Brake performance unable to be tested (1.2.1 (g)) | 2 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 2 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 2 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 2 |
| Fuel system component leaking (6.1.3 (b) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Power steering component leaking (2.1.5 (a)) | 2 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Road wheel fixing loose (5.2.1 (a) (i)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bushes (5.3.4 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and arch (5.3.6 (a) (i)) | 1 |
| Offside Suspension arm pin or bush excessively worn front and rear (5.3.4 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front subframe mount (5.3.6 (a) (i)) | 1 |
| Rear Prop shaft joint so worn it is likely to fail Rear prop ,rear joint (6.1.7 (c) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front crossmember corroded and holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced radiator support/cross member (6.1.1 (c) (i)) | 1 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
| Fuel system component leaking pump area (6.1.3 (b) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Crossmember (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner/outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner/outer sill (5.3.6 (a) (i)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt Insecure (2.1.3 (g) (ii)) | 1 |
| Nearside Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Power steering fluid reservoir empty (2.1.5 (b) (ii)) | 1 |
| Offside Front Power steering ram leaking (2.1.5 (a)) | 1 |
| Offside Rear Bumper insecure (6.1.4 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Seat belt likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Water in light unit (4.1.2 (c)) | 1 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crosmember (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 1 |
| Brake performance unable to be tested Requires decelerometer test, unable to carry out due to other failures. (1.2.1 (g)) | 1 |
| Offside Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Central Sill Inner & Outer (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn & Gaiter Split (5.3.4 (a) (i)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush likely to become detached missing D bush bracket broken (5.3.4 (a) (ii)) | 1 |
| Offside Front Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks head lamp (4.11 (c) (iii)) | 1 |
| Power steering ram leaking rack (2.1.5 (a)) | 1 |
| Emissions unable to be completed smoke levels (8.2.2.2 (e)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mount holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light Shows pink / white (4.5.4 (a)) | 1 |
| Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Fuel system component leaking pump (6.1.3 (b) (i)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner /outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (rear in two places) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch front (5.3.6 (a) (i)) | 1 |
| Exhaust shield missing where fitted as original equipment creating a risk of fire passenger front seat inner heatshield missing/melted has been contacting exhaust (6.1.3 (e)) | 1 |
| Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear corner area (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step inner cill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre middle cill (6.1.1 (c) (i)) | 1 |
| Offside Front Battery insecure and likely to cause a short circuit SECURING BRACKET NOT FITTED (4.13 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch/floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced crossmember (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Offside Front Inner Vehicle structure is so deformed it is likely to adversely affect braking or steering os inner wing corroded (6.1.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected inner wing corroded (5.3.6 (a) (ii)) | 1 |
| Front Lower Suspension component mounting prescribed area fractured significantly reducing structural strength cross member corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength arch corroded to floor (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to cill corroded (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill to floor corroded (5.3.6 (a) (i)) | 1 |
| Nearside Outer Suspension component mounting prescribed area fractured significantly reducing structural strength cill corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar insecure and impairing directional stability anti roll bar linkage ball joint nut loose (5.3.3 (a) (ii)) | 1 |
| Nearside Front Headlamp lens seriously defective effecting beam image (4.1.1 (b) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassi / front cross member (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect Lens faded (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Lens faded (4.1.2 (c)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D-Bush (5.3.4 (a) (i)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & outer sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Rear brake caliper leaking (3.6.A.1) | 1 |
| Drivers seat insecure (6.2.A.1) | 1 |
| Nearside rear brake recording little or no effort (3.7.B.5a) | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Inner Body has a sharp edge caused by corrosion (6.1.C.1) | 1 |
| Nearside Front Headlamp not working on dipped beam (1.7.5a) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt Split (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened As marked (5.3.3 (b) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength X member NS +OS in front and behind box section (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced central sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced OSR inner + outer wheel arch rear section / NSR inner wheel arch rear section (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger / inner sill (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced OSF inner sill x2 + NSF inner sill x1 (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to body (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake prescribed area fractured sill back plate in wheel arch (1.1.21 (e) (i)) | 1 |
| Offside Rear Brake prescribed area fractured sill back plate in wheel arch (1.1.21 (e) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier Battery tray/holder holes and corroded , battery insecure (4.13 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe (5.3.6 (a) (i)) | 1 |
| Central Front Body component likely to become detached - Radiator support bracket corroded where rubber mounts have fallen (6.2.1 (a) (ii)) | 1 |
| Nearside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Front Service brake grabbing severely - NS/OS (1.2.1 (c)) | 1 |
| Rear Service brake grabbing severely - OS/NS (1.2.1 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 1 |
| Central Rear Seat belt missing (7.1.2 (a)) | 1 |
| Nearside Rear Seat belt damaged (7.1.2 (b) (i)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/outrigger (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired O/S inner sill corrroded. (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Wheel arch and body corroded (6.2.2 (d) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Wheel arch and body corroded. (6.2.2 (d) (ii)) | 1 |
| Power steering malfunctioning (2.1.5 (a)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Front cross member corroded. (6.1.1 (c) (i)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Direction indicator incorrect colour White in colour. (4.4.3 (a)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Drivers seat insecure Bolt missing (6.2.5 (a) (ii)) | 1 |
| Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases flexi section (6.1.2 (a)) | 1 |
| Offside Rear Seat belt buckle not functioning as intended seat buckle trapped (7.1.2 (d)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both outer sills holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor within 30 cm of tow bar mount (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/wing by strut top mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Front of arch in sliding door shut (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced front of inner arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear of arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear of arch (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central inner sill (7.1.1 (a) (i)) | 1 |
| Fuel system component leaking Fuel pump area (6.1.3 (b) (i)) | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
| Nearside Rear Inner Body modification likely to adversely affect braking or steering sill (6.2.1 (d) (ii)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill two pieces (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill two pieces (7.1.1 (a) (i)) | 1 |
| Battery insecure and likely to cause a short circuit both sides (4.13 (a) (ii)) | 1 |
| Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger to inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger to sill (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases and centre (6.1.2 (a)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SIL (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SIL (6.1.1 (c) (i)) | 1 |
| Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b)) | 1 |
| Offside Front Brake hose leaking on a hydraulic braking system AT FLEXIBLE BRAKE HOSE TO CALLIPER UNION (1.1.12 (c) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member (5.3.6 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i)) | 1 |
| Headlamp incorrect colour (1.7.5b) | 1 |
| Rear fog lamp tell tale missing (1.3.1b) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b) | 1 |
| Fuel cap/sealing device missing (7.2.4a) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap / inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
| Nearside Rear Stop lamp not working (1.2.1b) | 1 |
| Rear fog lamp tell tale not working (1.3.1b) | 1 |
| Windscreen wiper blade insecure | 1 |
| Offside Rear Rear fog lamp missing (1.3.2a) | 1 |
| Headlamp switch insecure (1.7.1) | 1 |
| Front Side repeater missing (1.4.A.2b) | 1 |
| Front Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch/inner arch (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to sill (5.3.6 (a) (i)) | 1 |
| Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember (5.3.6 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component pin or bush excessively worn Wishbone bush (5.3.4 (a) (i)) | 1 |
| Towbar component excessively corroded Floor around tow bar mounting (6.1.6 (a)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse leg (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Emissions unable to be completed over heating (8.2.2.2 (e)) | 1 |
| Brake performance not tested Batteries insecure unsafe to test (1.2.1 (g)) | 1 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
| Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier Both batteries (4.13 (a) (ii)) | 1 |
| Power steering component leaking Steering rack leaking (2.1.5 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Numerous holes inner & outer sill , Upper inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member lower corner (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member lower corner (5.3.6 (a) (i)) | 1 |
| Emissions not tested insufficient oil (8.2.2.2 (e)) | 1 |
| Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
| Brake performance not tested battery insecure (1.2.1 (g)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Power steering component leaking rack area (2.1.5 (a)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear bolt mounting point inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member mounting (5.3.6 (a) (i)) | 1 |
| Emissions not tested (8.2.2.2 (e)) | 1 |
| Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect bulb sat wrong (4.1.2 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2x places (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / arch (5.3.6 (a) (i)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases FLexi (6.1.2 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions unable to be completed (8.2.2.2 (e)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Headlamp lens seriously defective both sides (4.1.1 (b) (ii)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Anti-roll bar pin or bush excessively worn rear D bushes and rear drop links (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Offside Front Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks door wiring bared (4.11 (c) (iii)) | 1 |
| Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Obligatory mirror does not provide a view to the rear (3.3 (c)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i)) | 1 |
| Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing/front panel (5.3.6 (a) (i)) | 1 |
| Tailgate cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner wheel arch (6.1.6 (i) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner wheel arch (6.1.6 (i) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Chassis (6.1.6 (i) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside inner sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside inner sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear chassis/jacking point (5.3.6 (a) (i)) | 1 |
| Nearside Front Position lamp not working (sidelight) (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front panel / radiator support (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced Centre near seat mounting (6.1.1 (b) (ii)) | 1 |
| Headlamp light intensity severely reduced Both (4.1.4 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Windscreen in an unacceptable condition (3.2 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Headlamp light intensity severely reduced dip and main (4.1.4 (a)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front outriggers (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear box (6.1.2 (a)) | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member/chassie (6.1.B.2) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outter sill areas (5.2.6) | 1 |
| Nearside front brake binding (3.7.B.1) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Offside Rear Rear fog lamp not working (1.3.2b) | 1 |
| Offside Front Obligatory mirror seriously deteriorated, affecting the rear view (8.1.2a) | 1 |
| Fuel cap/sealing device ineffective temporary cap fitted (6.1.3 (b) (i)) | 1 |
| Rear fog lamp insecure (1.3.2a) | 1 |
| Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2) | 1 |
| Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e) | 1 |
| Nearside Rear Statutory seat belt missing (5.1.1) | 1 |
| Offside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| brake disc in such a condition that it is seriously weakened (3.5.1i) | 1 |
| Service brake: efficiency below requirements (3.7.C.1a) | 1 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
| Emissions unable to be completed major transmission leak at idle (8.2.2.2 (e)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded in body sill and wheel arch. (2.4.A.3) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded in body sill. (2.4.A.3) | 1 |
| Rear Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear section (6.1.2 (a)) | 1 |
| Nearside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar linkage pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch rear (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Drivers airbag missing (7.1.5 (a)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |