Most common failures | No# failures |
---|
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Rear parking brake recording little or no effort | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Brake pipe excessively corroded | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Registration plate lamp issues | 2 |
Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Offside Rear Brake load sensing valve linkage seized |3.6.E.3| | 2 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Brake cable locking device insecure |3.5.1l| | 1 |
Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
Centre Obligatory mirror missing |8.1.1| | 1 |
Nearside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Offside Rear Leaf spring shackle bracket corroded and seriously weakened |2.4.B.6d| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Brake pipe leaking |3.6.A.1| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| incomplete |1.1.4a| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Windscreen has damage | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Wheel nut|s| missing |4.2.A.1e| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear brake binding | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Brake valve insecurely mounted |3.6.A.2a| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |