Most common failures | No# failures |
---|
Headlamp aim out of alignment | 67 |
Parking brake: efficiency below requirements |3.7.B.7| | 46 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 28 |
Brakes imbalanced across an axle | 27 |
Registration plate lamp issues | 22 |
Windscreen wiper does not clear the windscreen effectively | 19 |
Rear parking brake recording little or no effort | 18 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 15 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 14 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Registration plate issues | 12 |
Service brake: efficiency below requirements |3.7.B.7| | 11 |
Offside Stop lamp not working |1.2.1b| | 10 |
Horn not working |1.6.2a| | 10 |
Rear brake binding | 9 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
Offside Headlamp not working on main beam |1.7.5a| | 8 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
Brake pipe excessively corroded | 8 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 8 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 8 |
Offside Headlamp not working on dipped beam |1.7.5a| | 7 |
Offside Side repeater not working |1.4.A.2c| | 7 |
Offside Rear Rear fog lamp not working |1.3.2b| | 7 |
Offside front brake binding |3.7.B.1| | 6 |
Nearside Stop lamp not working |1.2.1b| | 6 |
Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Nearside Front Direction indicator not working |1.4.A.2c| | 6 |
Offside Rear fog lamp not working |1.3.2b| | 6 |
Offside Front front brake binding |3.7.B.1| | 6 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Rear fog lamp not working |1.3.2b| | 6 |
Mechanical brake component has restricted free movement | 6 |
Windscreen washer not working | 6 |
Front brake application uneven | 5 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Emissions not tested |7.0| | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 4 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Hazard warning switch faulty |1.4.B.1d| | 3 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Front Direction indicator not working |1.4.A.2c| | 3 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 3 |
Brake fluid warning lamp illuminated |3.6.G.2| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Headlamp switch faulty |1.7.1| | 3 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Rear brake disc excessively pitted |3.5.1h| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Parking brake lever has no reserve travel |3.1.6b| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Rear fog lamp tell tale not working |1.3.1b| | 3 |
Offside Front Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
Hazard warning switch inoperative |4.4.2 |a| |ii|| | 2 |
Offside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Offside Front Direction indicators not working |1.4.A.2c| | 2 |
Nearside Front Direction indicators not working |1.4.A.2c| | 2 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Headlamp insecure |1.7.3| | 2 |
Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 2 |
Battery insecure |1.9.1| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 2 |
Position lamp switch faulty |1.1.A.1| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Brake hose excessively deteriorated | 2 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 2 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Front Side repeater not working |1.4.A.2c| | 2 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Windscreen wiper blade insecure | 2 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 2 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Rear brake disc in such a condition that it is seriously weakened | 2 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Front Bootlid cannot be secured in the closed position |6.4.1| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Nearside Side repeater not working (4.4.1 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | 2 |
Horn not working (1.6.2a) | 2 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to inner arch to lower floor (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to floor (5.3.6 (a) (i)) | 1 |
Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Side repeater insecure |1.4.A.2b| | 1 |
Offside Inner Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Nearside Rear Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
Nearside Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floorpan/inner wheel arch Excessively corroded with 30cms of lower suspension arm mounting point. |5.3.6 |a| |i|| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Fuel system component insecure |7.2.1| | 1 |
Nearside Direction indicator not working Front and rear. |4.4.1 |a| |ii|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel and floor pan excessively corroded within 30cms of seat belt mounting. |7.1.1 |a| |i|| | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel not attached to floor pan at rear end. Within 30cms of seat belt mounting. |7.1.1 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing panel within 30cms of suspension strut mounting. |5.3.6 |a| |i|| | 1 |
Boot lid cannot be secured in the closed position (6.2.1 (e)) | 1 |
Rear Direction indicator not working x2 (4.4.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Hazard warning lamps inoperative all four (4.4.1 (e)) | 1 |
Front Suspension component mounting prescribed area is inadequately repaired suspension arms and tie rod arms x2 sides (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan close to suspension arm (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired innersill/boxsection close to suspension arm (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seam above suspension arm mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut tower/inner wheelarch x2 areas (5.3.6 (a) (i)) | 1 |
Windscreen has damage | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Tie bar/rod attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Front front brake recording little or no effort N/S AND O/S |3.7.B.5a| | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Brake pedal reservoir fluid level decreases after several brake applications |3.3.C.1| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded outer sill corrosion holes |2.4.A.3| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL TO FLOOR. |6.1.1 |c| |i|| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL TO FLOOR. |6.1.1 |c| |i|| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Offside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL CORROSION. (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL CORROSION. (6.2.2 (d) (i)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner valance (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner valance (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/inner sill (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/jacking point (6.1.1 (c) (i)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch panel/wheelarch (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch panel/wheel arch (5.3.6 (a) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
Offside Inner Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Offside Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Inner Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear brake disc excessively pitted |3.5.1h| | 1 |
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside brake caliper has restricted free movement |3.5.1k| | 1 |
Nearside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded mid point sill |5.2.6| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis as marked |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is severely distorted Chassis as marked |2.4.A.3| | 1 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Suspension arm pin or bush excessively worn Rear bush. |5.3.4 |a| |i|| | 1 |
Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front brake disc has restricted free movement |3.5.1j| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Rear Lower Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Offside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 1 |
Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Steering column top mounting bracket insecure |2.1.2d| | 1 |
Upper Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
Offside Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d| | 1 |
Electrical wiring insecure |1.9.2a| | 1 |
Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Nearside Side repeater missing |1.4.A.2b| | 1 |
Offside Side repeater missing |1.4.A.2b| | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Hazard warning lamps inoperative all |1.4.B.1b| | 1 |
Steering column top mounting bracket insecure |2.1.2d| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Access panel cannot be secured in the closed position |6.4.1| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/jack point |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake performance not tested Due to brakes binding. (1.2.1 (g)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Stop lamp not working both |1.2.1b| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Headlamp aim beam image too far to the right |1.6.B4| | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Horn control missing |1.6.1| | 1 |
Nearside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
Nearside Front Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
front brake binding both |3.7.B.1| | 1 |
Nearside Side repeater insecure |1.4.A.2b| | 1 |
Emissions not tested |7.3.A.1| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Nearside Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
Brake performance not tested engine cut out wont run (1.2.1 (g)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Emissions not tested exhaust blowing-analyser wont read (8.2.1.2 (d)) | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
Nearside Rear Brake pipe leaking |3.6.A.1| | 1 |
Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded front floor to sill |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded front inner wing to floor |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded front inner wing to chassis leg |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded rear floor |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded rear inner wing |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is inadequately repaired Floor (7.1.1 (a) (i)) | 1 |
Offside Seat belt anchorage prescribed area is inadequately repaired Floor (7.1.1 (a) (i)) | 1 |
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Hand operated control valve control cannot be moved over its full travel |3.2.1c| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Offside Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
Front Service brake excessively binding |1.2.1 |f|| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |