| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Headlamp aim out of alignment | 3 |
| Registration plate issues | 2 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 2 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Brakes imbalanced across an axle | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Front Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength offside rear mount (5.3.6 (a) (i)) | 1 |
| Direction indicator incorrect colour all (4.4.3 (a)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b)) | 1 |
| All direction indicators incorrect colour (4.4.3 (a)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside front mount (5.3.6 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength offside front mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock turret (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leaf spring rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Rear brake binding | 1 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush front bush |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush rear bush |2.4.G.2| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill and across sill to foot well |5.2.6| | 1 |
| Nearside Rear Upper Leaf spring has excessive wear in a shackle pin and/or bush and lower bush |2.4.B.2| | 1 |
| Brake prescribed area is excessively corroded load sensing valve mounting area corroded (1.1.21 (e) (i)) | 1 |
| Offside Rear Loading door cannot be secured in the closed position (6.2.1 (e)) | 1 |
| Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength front sub frame near side front mounting area corroded (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mount area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mount area (5.3.6 (a) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting area |5.3.6 |a| |i|| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NS sill - underside |rear and centre| |6.1.B.2| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Leaf spring shackle pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Brake pipe excessively corroded | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |