>

MOT History from tests of diesel FIAT TEMPRAs year 1991

Review the list of common FIAT TEMPRA failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history
Pass percent:52.50%
(The average a diesel FIAT TEMPRA year 1991 passes without issue)
Based on:80 MOT Tests
Most common failuresNo# failures
Brake pipe excessively corroded9
Headlamp aim out of alignment6
Brake hose excessively deteriorated6
Registration plate lamp issues5
Offside Rear fog lamp not working |1.3.2b|3
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|3
Parking brake lever has no reserve travel |3.1.6b|3
Parking brake: efficiency below requirements |3.7.B.7|3
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|3
Rear parking brake recording little or no effort3
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b|3
Brake load sensing valve linkage seized |3.6.E.3|3
Front brake application uneven3
Brakes imbalanced across an axle3
Offside Front brake disc excessively pitted |3.5.1h|2
Offside Front Track rod end ball joint has excessive play |2.2.B.1f|2
Nearside Front position lamp|s| not working |1.1.A.3b|2
Nearside Front brake disc excessively pitted |3.5.1h|2
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|2
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f|2
Offside Track rod end ball joint has excessive play |2.2.B.1f|2
Nearside Stop lamp not working |1.2.1b|2
Offside Front position lamp|s| not working |1.1.A.3b|2
Offside Rear rear brake recording little or no effort |3.7.B.5a|2
Front Exhaust has a major leak of exhaust gases |7.1.2|2
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|2
Horn not working |1.6.2a|2
Service brake: efficiency below requirements |3.7.B.7|2
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Headlamp aim beam image too far to the right |1.6.B4|1
Nearside Windscreen wiper blade deteriorated |8.2.2|1
Offside Windscreen wiper blade deteriorated |8.2.2|1
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|1
Centre Exhaust mounting missing |7.1.1b|1
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|1
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Front Fuel hose leaking |7.2.3|1
Centre Exhaust system not adequately supported |7.1.1|1
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front front brake binding |3.7.B.1|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||1
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|1
Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Nearside Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Rear brake application uneven1
Offside Rear rear brakes release unevenly |3.7.B.4|1
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Offside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|1
Nearside Rear Direction indicators not working |1.4.A.2c|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Outer Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front front brake binding |3.7.B.1|1
Fuel system component leaking |7.2.3|1
Nearside front brake binding |3.7.B.1|1
Nearside Track rod end ball joint has excessive play |2.2.B.1f|1
Front brake disc in such a condition that it is seriously weakened1
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Front Anti-roll bar linkage fractured |2.4.G.1|1
Offside Front Anti-roll bar linkage fractured |2.4.G.1|1
Offside Front Headlamp not working on dipped beam |1.7.5a|1
Offside Rear Rear fog lamp not working |1.3.2b|1
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.2|1
Offside Front Lower Ball joint has excessive play |2.2.B.1f|1
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Brake load sensing valve has been disconnected and was fitted as standard |3.6.E.2|1
Front Fuel system component leaking |7.2.3|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy