| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Headlamp aim out of alignment | 4 |
| Rear brake binding | 3 |
| Registration plate lamp issues | 3 |
| Registration plate issues | 3 |
| Windscreen washer not working | 2 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Brakes imbalanced across an axle | 2 |
| Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 2 |
| Front brake excessively fluctuating | 2 |
| Parking brake: efficiency below requirements (3.7.B.7) | 2 |
| Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced front x member (6.1.1 (b) (ii)) | 1 |
| Front Exhaust has a major leak of exhaust gases snapped (6.1.2 (a)) | 1 |
| Emissions not tested due to exhaust snapped (8.2.2.2 (e)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Brake prescribed area is excessively corroded inner wheel arch corroded / holed (front) near ABS pump (1.1.21 (e) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch / turret holed (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Nearside Front coil spring broken (2.4.C.1a) | 1 |
| Nearside Front Direction indicators incorrect colour (1.4.A.2f) | 1 |
| Offside Front Direction indicators incorrect colour (1.4.A.2f) | 1 |
| Offside Rear Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded / holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at crossmember mounting corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Central Outline marker lamp not working nearside (4.2.1 (a) (ii)) | 1 |
| Central Outline marker lamp not working offside (4.2.1 (a) (ii)) | 1 |
| Offside Rear fog lamp not working (1.3.2b) | 1 |
| Rear brake application uneven | 1 |
| rear brakes release unevenly (3.7.B.4) | 1 |
| Stop lamp adversely affected by the operation of another lamp High level (1.2.1f) | 1 |
| Offside Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Parking brake: efficiency below requirements (3.7.C.1b) | 1 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Outline marker lamp not working CENTRAL (4.2.1 (a) (ii)) | 1 |
| Nearside Side repeater missing (1.4.A.2b) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone A (8.3.1e) | 1 |
| Service brake: efficiency below requirements (3.7.B.7) | 1 |
| Centre Exhaust system not adequately supported (7.1.1) | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front front brake binding (3.7.B.1) | 1 |
| Offside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Rear Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Rear Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Stop lamp not working (1.2.1b) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch x4 (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch x5 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working N/S Center Outline marker lamp not working. (4.2.1 (a) (ii)) | 1 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Centre Stop lamp has less than 50% of the light sources illuminating (1.2.1b) | 1 |