| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Brake pipe excessively corroded | 9 |
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Registration plate issues | 2 |
| Horn not working (1.6.2a) | 2 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Rear brake application uneven | 2 |
| Horn not working (7.7 (a)) | 2 |
| Windscreen washer not working | 2 |
| Horn not working |1.6.2a| | 2 |
| Front brake excessively fluctuating | 2 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front cross member (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front crossmember (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Parking brake: efficiency below requirements (3.7.B.7) | 1 |
| Offside Rear position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Headlamp not working on dipped beam (1.7.5a) | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) | 1 |
| Nearside rear brake grabbing severely (3.7.A.5b) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch ( top ) (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing to chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of cab forming inner sill to step (6.2.2 (d) (i)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Brake pipe inadequately clipped (3.6.B.1) | 1 |
| Windscreen has damage | 1 |
| Battery insecure (1.9.1) | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a) | 1 |
| Offside Headlamp not in good working order adversely affecting beam image (1.2.4a) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Rear Service brake lagging in operation offside & nearside (1.2.1 (d)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Rear brake binding | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone A (8.3.1e) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture brake hoses insecure (1.1.11 (a)) | 1 |
| Front Service brake excessively fluctuating BOTH (1.2.1 (e)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.2) | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Upper Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Body has an unsafe modification seatbelt bolts (6.2.1 (d) (i)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Central Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |