Most common failures | No# failures |
---|
Headlamp aim out of alignment | 49 |
Windscreen wiper does not clear the windscreen effectively | 44 |
Brake pipe excessively corroded | 29 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 18 |
Horn not working |1.6.2a| | 17 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 16 |
Registration plate lamp issues | 13 |
Brake hose excessively deteriorated | 9 |
Service brake: efficiency below requirements |3.7.B.7| | 9 |
Windscreen washer not working | 9 |
Offside Rear fog lamp not working |1.3.2b| | 7 |
Horn not working (7.7 (a) (ii)) | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Brakes imbalanced across an axle | 6 |
Rear brake binding | 5 |
Headlamp aim beam image kick up to the offside |1.8| | 4 |
Nearside Side repeater not working |1.4.A.2c| | 4 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Rear parking brake recording little or no effort | 4 |
Horn not loud enough to be heard by another road user |1.6.2b| | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Exhaust system not adequately supported |7.1.1| | 4 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Exhaust mounting missing |7.1.1b| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Front Direction indicators incorrect colour |1.4.A.2f| | 3 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Rear Braking system leaking |3.6.A.1| | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Headlamp insecure |1.7.3| | 2 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 2 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
Horn not working (7.7 (a)) | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Rear Brake valve leaking |3.6.A.1| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Hazard warning lamps inoperative |1.4.B.1b| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Offside Rear Position lamp not working |4.2.1 |a|| | 2 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
Registration plate issues | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine 1.84 plate limit (8.2.2.2 (b)) | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
All outline marker lamps not working two on n/s not working and two on o/s not working (4.2.1 (a) (ii)) | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Nearside An item not tested |Manual| | 1 |
Offside An item not tested |Manual| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Front Fluid suspension unit leaking |2.4.D.2| | 1 |
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel (6.1.1 (c) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step inner sill (6.1.1 (c) (i)) | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded jacking point area |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded jacking point area |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded Step area |5.2.6| | 1 |
Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Front Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded Rear wishbone mount |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded Round top mount |2.4.A.3| | 1 |
Nearside Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Brake valve leaking |3.6.A.1| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front All position lamps not working |1.1.A.3b| | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Front Passenger`s seat insecure |6.2.A.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Fuel cap/sealing device ineffective wrong cap (6.1.3 (b) (i)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Fuel hose leaking leak off pipes |7.2.3| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Service brake: efficiency below requirements |3.7.D.4| | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i)) | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point |5.3.6 |a| |i|| | 1 |
Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Offside chassis outrigger area (5.3.6 (a) (i)) | 1 |
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Offside chassis,inside wheel arch area (5.3.6 (a) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Nearside Front Direction indicator not working side (4.4.1 (a) (ii)) | 1 |
Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Steering column shaft has excessive end float |2.1.3| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Fuel system component leaking injector leak off end cap |7.2.3| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Front Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
Offside Front Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
Nearside Inner Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen left hand drive lamps fitted |4.1.2 |a|| | 1 |
Front brake excessively fluctuating | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Nearside Direction indicators not working |1.4.A.2c| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Electrical wiring inadequately supported |1.9.2a| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower leg at front crossmember (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower leg at front crossmember (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear crossmember mount holed (6.1.1 (c) (i)) | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing at battery and strut mounting (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill within 30cm of seat belt anchorage (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill repaired with fibre glass inadequate repair (6.2.2 (d) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded at crossmember mounting point behind strut (6.1.1 (c) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Hazard warning lamps inoperative all |1.4.B.1b| | 1 |
Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Braking system leaking Load sensing valve |3.6.A.1| | 1 |
Front Suspension arm has excessive play in a pin/bush both |2.4.G.2| | 1 |
Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
Offside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine |8.2.2.2 |b|| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded X2 |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded X2 |2.4.A.3| | 1 |
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Nearside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Position lamp not working side lamp out (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp missing marker lamp missing (4.2.1 (a) (ii)) | 1 |
Nearside Front Upper Position lamp not working marker lamp not working (4.2.1 (a) (ii)) | 1 |
Front Windscreen wiper not working seized (3.4 (a)) | 1 |
Offside Rear Rear fog lamp does not emit a steady red light not working (4.5.4 (a)) | 1 |
Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Offside Body component corroded and likely to cause injury step out (6.2.1 (a) (i)) | 1 |
Exhaust system insecure exhaust rubbers x6 and mounting and exhaust bent (6.1.2 (a)) | 1 |
Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale missing |1.3.1b| | 1 |
Nearside Steering column universal joint has excessive play |2.1.5| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Steering rack insecure |2.2.B.1a| | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 1 |
Front Service brake excessively binding both (1.2.1 (f)) | 1 |
Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Central Exhaust has a major leak of exhaust gases box |7.1.2| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Front Upper All position lamps not working |1.1.A.3b| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front All direction indicators not working and rear |4.4.1 |a| |ii|| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Battery insecure BOTH |1.9.1| | 1 |
Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Power steering malfunctioning (2.1.5 (a)) | 1 |
Central Front Lower Power steering pipe/hose leaking on rack (2.1.5 (a)) | 1 |
Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 1 |
Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 1 |
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret (5.3.6 (a) (i)) | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Offside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Rear Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Central Exhaust has a major leak of exhaust gases silencer fractured (6.1.2 (a)) | 1 |
Rear Brake lever pivot excessively tight rear brakes binding /center pivot siezed (1.1.1 (a)) | 1 |
Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 1 |
Offside Front Suspension arm pin or bush excessively worn rear bush |5.3.4 |a| |i|| | 1 |
Nearside Front Suspension component attachment bracket/mounting corroded and seriously weakened sub frame mounting |5.3.3 |b| |i|| | 1 |
Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened sub frame mounting |5.3.3 |b| |i|| | 1 |
Offside Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
Nearside Seat belt buckle damaged (7.1.2 (d)) | 1 |
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt inner (6.1.7 (g) (ii)) | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Fuel system component leaking at fuel injectors (6.1.3 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases at joint (6.1.2 (a)) | 1 |
Fuel system component leaking injector (6.1.3 (b) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Direction indicators incorrect colour front and rear indicator incorrect colour |1.4.A.2f| | 1 |
Offside Side repeater not working not working |1.4.A.2c| | 1 |
Nearside Rear wheel cylinder has restricted free movement restricted free movement of wheel |3.5.1k| | 1 |
Battery insecure battery inscure |1.9.1| | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Fuel pipe leaking engine leak off |6.1.3 |b| |i|| | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 1 |
Fuel system component leaking |7.2.3| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Windscreen has damage | 1 |
Nearside Front Horn not working |1.6.2a| | 1 |
Offside Rear Hydraulic brake cylinder insecurely mounted |3.6.A.2a| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Upper Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Exhaust system insecure Unsupported in 6 places |6.1.2 |a|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step holed |6.1.1 |c| |i|| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger holed , corroded and weak |6.1.1 |c| |i|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Door step holed |6.1.1 |c| |i|| | 1 |
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member corroded and holed |6.1.1 |c| |i|| | 1 |
Offside Front Upper Position lamp not working |4.2.1 |a|| | 1 |
Nearside Side repeater not working |4.4.1 |a| |ii|| | 1 |
Rear brake application uneven | 1 |
Offside Front Rear fog lamp not working |1.3.2b| | 1 |
Centre Front Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Position lamp not working Marker lamp (4.2.1 (a) (ii)) | 1 |