| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 84 |
| Headlamp aim out of alignment | 75 |
| Registration plate lamp issues | 35 |
| Parking brake: efficiency below requirements |3.7.B.7| | 25 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 19 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 18 |
| Brakes imbalanced across an axle | 18 |
| Rear brake binding | 17 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 14 |
| Service brake: efficiency below requirements |3.7.B.7| | 13 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 13 |
| Nearside Stop lamp not working |1.2.1b| | 12 |
| Offside Rear fog lamp not working |1.3.2b| | 12 |
| Offside Stop lamp not working |1.2.1b| | 10 |
| Horn not working |1.6.2a| | 10 |
| Nearside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 9 |
| Horn not working (7.7 (a)) | 9 |
| Registration plate issues | 8 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 7 |
| Offside Rear fog lamp missing |1.3.2a| | 6 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 6 |
| Brake pipe excessively corroded | 6 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 6 |
| Windscreen washer not working | 6 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 6 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 6 |
| Anti-lock braking system warning lamp indicates an ABS fault | 5 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Centre Exhaust system not adequately supported |7.1.1| | 5 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 5 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 5 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 5 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Stop lamp not working |1.2.1b| | 4 |
| Exhaust system not adequately supported |7.1.1| | 4 |
| Rear parking brake recording little or no effort | 4 |
| Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 4 |
| Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Horn not working (7.7 (a) (ii)) | 4 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 4 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 4 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 3 |
| Fuel system component leaking |7.2.3| | 3 |
| Parking brake lever has no reserve travel |3.1.6b| | 3 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 3 |
| Offside Rear Stop lamp not working |1.2.1b| | 3 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Side repeater not working |1.4.A.2c| | 3 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Bonnet cannot be secured in the closed position |8.4.1| | 3 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Brake hose excessively deteriorated | 3 |
| Offside Front Shock absorbers has a serious fluid leak | 3 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Exhaust system insecure (6.1.2 (a)) | 3 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Rear brake application uneven | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Centre Stop lamp not working |1.2.1b| | 2 |
| Offside front brake binding |3.7.B.1| | 2 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 2 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Shock absorbers has a serious fluid leak | 2 |
| Exhaust mounting missing |7.1.1b| | 2 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Outline marker lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 2 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Offside Headlamp insecure (4.1.1 (c)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a)) | 2 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |