>

MOT History from tests of diesel FIAT DUCATTOs year 2006

Review the list of common FIAT DUCATTO failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history
Pass percent:70.27%
(The average a diesel FIAT DUCATTO year 2006 passes without issue)
Based on:74 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment11
Windscreen wiper does not clear the windscreen effectively6
Registration plate issues5
Parking brake lever has no reserve travel |3.1.6b|3
Service brake: efficiency below requirements |3.7.B.7|3
Rear fog lamp not working |1.3.2b|2
Rear brake binding2
Battery insecure |1.9.1|2
Front brake disc in such a condition that it is seriously weakened2
Parking brake: efficiency below requirements |3.7.B.7|2
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))2
Nearside Front Shock absorbers has a serious fluid leak2
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))2
Offside Headlamp not working on main beam (4.1.1 (a) (ii))2
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength iner sill |5.3.6 |a| |i||1
Offside Front Direction indicator incorrect colour |4.4.3 |a||1
Headlamp levelling device inoperative |4.1.5 |a||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch corroded and holed within 30cm strut housing in a number of places |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch corroded and holed within 30cm strut housing in a number of places |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch corroded and holed within 30cm of subframe mount |5.3.6 |a| |i||1
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Nearside Rear Leaf spring anchor bracket insecure |5.3.1 |a| |i||1
Offside Rear Leaf spring anchor bracket insecure |5.3.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear leaf spring mounting |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill |5.3.6 |a| |i||1
Offside Front Seat belt anchorage prescribed area is excessively corroded cabstep |5.2.6|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3|1
Suspension spring mounting prescribed area is excessively corroded rear crossmember |2.4.A.3|1
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear position lamp|s| adversely affected by the operation of another lamp when foglight |1.1.A.3f|1
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front Direction indicators incorrect colour |1.4.A.2f|1
Offside Front Direction indicators incorrect colour |1.4.A.2f|1
Nearside Front Direction indicator incorrect colour |1.4.A.2f|1
Offside Front Direction indicator incorrect colour |1.4.A.2f|1
Centre Stop lamp not working |1.2.1b|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Brakes imbalanced across an axle1
Front Exhaust has a major leak of exhaust gases |7.1.2|1
Emissions not tested |7.4.B.1|1
Offside Headlamp aim beam image kick up to the offside |1.8|1
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Rear fog lamp not working |1.3.2b|1
Offside Rear Stop lamp not working |1.2.1b|1
Offside Rear Direction indicators not working |1.4.A.2c|1
Offside Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f|1
Offside Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|1
Nearside Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a))1
Battery insecure and likely to fall from carrier (4.13 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under battery (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))1
Offside Rear fog lamp not working (4.5.1 (a) (ii))1
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii))1
Windscreen wiper blade insecure1
Offside Track rod end ball joint has excessive play |2.2.B.1f|1
Rear parking brake recording little or no effort1
Nearside Headlamp insecure |4.1.1 |c||1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))1
Rear fog lamp not working (4.5.1 (a) (ii))1
Nearside Front Direction indicator incorrect colour (4.4.3 (a))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under battery near engine mount (6.1.1 (c) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength jacking point to chassis leg (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))1
Parking brake efficiency below requirements (1.4.2 (a) (i))1
Service brake efficiency below requirements (1.2.2 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength next to jacking point (5.3.6 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to floor (6.1.1 (c) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy