MOT History from tests of petrol FIAT DUCATOs year 1999

Review the list of common FIAT DUCATO failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history

Pass percent:53.52%

(The average a petrol FIAT DUCATO year 1999 passes without issue)

Based on:639 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	76
Headlamp aim out of alignment	46
Windscreen wiper does not clear the windscreen effectively	45
Registration plate lamp issues	30
Horn not working \|1.6.2a\|	14
Rear brake binding	13
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	12
Brakes imbalanced across an axle	12
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	10
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	9
Windscreen washer not working	9
Parking brake: efficiency below requirements \|3.7.B.7\|	9
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	8
Offside Stop lamp not working \|1.2.1b\|	8
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))	8
Exhaust has a major leak of exhaust gases \|7.1.2\|	7
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	7
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	7
Nearside Stop lamp not working \|1.2.1b\|	7
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	7
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	7
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	7
Rear brake application uneven	6
Offside Rear wheel bearing has excessive play \|2.6.2\|	6
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	6
Nearside Front Direction indicator incorrect colour \|1.4.A.2f\|	6
Nearside Rear wheel bearing has excessive play \|2.6.2\|	5
Offside Rear Direction indicator incorrect colour \|1.4.A.2f\|	5
Rear Mechanical brake component has restricted free movement	5
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	5
Registration plate issues	5
Service brake: efficiency below requirements \|3.7.B.7\|	5
Rear parking brake recording little or no effort	5
Nearside Rear Direction indicator incorrect colour \|1.4.A.2f\|	4
Exhaust Lambda reading after 2nd fast idle outside specified limits \|8.2.1.2 \|c\|\|	4
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	4
Nearside Rear Stop lamp not working \|1.2.1b\|	4
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	4
Exhaust system not adequately supported \|7.1.1\|	4
Centre Exhaust system not adequately supported \|7.1.1\|	4
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	4
Offside Front Direction indicator incorrect colour \|1.4.A.2f\|	4
Emissions not tested \|7.0\|	4
Nearside Headlamp not working on dipped beam \|1.7.5a\|	4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	4
Horn not working (7.7 (a))	4
Horn not loud enough to be heard by another road user \|1.6.2b\|	3
Front brake application uneven	3
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	3
Horn not working \|7.7 \|a\| \|ii\|\|	3
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	3
Front Windscreen wiper not operating automatically when switched on \|8.2.1b\|	3
Offside Front constant velocity joint gaiter split \|2.5.C.1a\|	3
Nearside Rear wheel bearing rough when rotated \|2.6.1\|	3
Nearside Headlamp not working on main beam \|1.7.5a\|	3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	3
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	3
Offside Front Service brake excessively binding (1.2.1 (f))	3
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))	3
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))	3
Offside Side repeater not working (4.4.1 (a) (ii))	3
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	3
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	3
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	2
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	2
Front Direction indicator incorrect colour \|1.4.A.2f\|	2
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	2
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	2
Nearside Rear Direction indicator not working \|1.4.A.2c\|	2
Brake load sensing valve seized \|3.6.E.3\|	2
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Rear Direction indicators incorrect colour \|1.4.A.2f\|	2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Headlamp aim not tested \|1.8.A.1c\|	2
Nearside Windscreen wiper not operating automatically when switched on \|8.2.1b\|	2
Offside Headlamp not working on dipped beam \|1.7.5a\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear wheel bearing rough when rotated \|2.6.1\|	2
Offside Front Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	2
Battery insecure \|1.9.1\|	2
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	2
Brake linkage has restricted free movement \|3.5.1k\|	2
Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Rear Stop lamp not working \|1.2.1b\|	2
Offside Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	2
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	2
Brake hydraulic reservoir fluid level below minimum level \|3.6.G.1b\|	2
Brake load sensing valve linkage seized \|3.6.E.3\|	2
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	2
Exhaust mounting missing \|7.1.1b\|	2
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))	2
Nearside Headlamp light intensity severely reduced (4.1.4 (a))	2
Exhaust has a major leak of exhaust gases (6.1.2 (a))	2
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))	2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))	2
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b))	2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))	2
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))	2
Emissions not tested (8.2.1.2 (d))	2
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))	2
Windscreen wiper not working (3.4 (a))	2
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	2
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	2
Battery insecure and likely to fall from carrier (4.13 (a) (ii))	2
Hazard warning switch inoperative (4.4.2 (a) (ii))	2
Stop lamp(s) all not working (4.3.1 (a) (iii))	2
Nearside Front Service brake excessively binding (1.2.1 (f))	2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	2
Offside Rear Position lamp not working (4.2.1 (a) (ii))	2
Offside Front Shock absorbers has a serious fluid leak	2
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))	2
Offside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Rear Brake valve insecurely mounted \|3.6.A.2a\|	1
Nearside Side repeater not working \|4.4.1 \|a\| \|ii\|\|	1
Offside Side repeater not working \|4.4.1 \|a\| \|ii\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear hanger \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear spring hanger \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger/sill \|2.4.A.3\|	1
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill \|5.2.6\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush \|2.4.G.2\|	1
Nearside Rear Rear wheel bearing rough when rotated \|2.6.1\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded x2 \|2.4.A.3\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits \|8.2.1.2 \|a\|\|	1
Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch near brake pipes \|2.4.A.3\|	1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch near brake pipes \|2.4.A.3\|	1
Nearside Inner Suspension component mounting prescribed area is excessively corroded centre sill corroded \|2.4.A.3\|	1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Trailer electrical socket \|13 pin\| not operating the trailer lamps as intended \|1.9.4\|	1
Windscreen wiper blade insecure	1
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly \|2.5.B.1b\|	1
Nearside Front Brake pipe inadequately supported \|3.6.B.1\|	1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring eye \|2.4.A.3\|	1
Offside Front Lower Ball joint has excessive play \|2.2.B.1f\|	1
Rear Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	1
Emissions not tested \|8.2.1.2 \|d\|\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at rear of o/s/r wheel. \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of n/s/r wheel. \|6.1.B.2\|	1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross excessively corroded next to rear step mountings. \|6.1.B.2\|	1
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill has excessive corrosion. \|6.1.B.2\|	1
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill has excessive corrosion. \|6.1.B.2\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill has excessive corrosion. \|6.1.B.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch has excessive corrosion in front of n/s/f wheel. \|6.1.B.2\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Nearside Front Direction indicators incorrect colour \|1.4.A.2f\|	1
Nearside Rear Direction indicators incorrect colour \|1.4.A.2f\|	1
Offside Front Direction indicators incorrect colour \|1.4.A.2f\|	1
Offside Front suspension retaining device ineffective \|2.5.A.4\|	1
Nearside Front Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Headlamp aim projected beam image is obviously incorrect \|4.1.2 \|c\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch front \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings under arch \|6.1.B.2\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Nearside Front Headlamp adversely affected by the operation of another lamp \|1.7.5c\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Power steering pipe\|s\| or hose\|s\| excessively corroded \|2.3.2\|	1
Central Front Power steering pipe\|s\| or hose\|s\| excessively corroded \|2.3.2\|	1
Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outrigger corroded severely \|6.1.B.2\|	1
Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outrigger corroding severely \|6.1.B.2\|	1
Offside Front Brake pipe inadequately clipped \|3.6.B.1\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded under arch upper \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded under arch upper \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded chassis \|2.4.A.3\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded under arch rear \|2.4.A.3\|	1
Nearside Rear Headlamp not working on dipped beam \|1.7.5a\|	1
Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
An item not tested \|Manual\|	1
Power steering fluid level below minimum \|2.3.1\|	1
Front brake excessively fluctuating	1
Offside Front front brake binding \|3.7.B.1\|	1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger \|6.1.B.2\|	1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger \|6.1.B.2\|	1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings back of cab \|6.1.B.2\|	1
Nearside rear brake excessively fluctuating \|3.7.B.3\|	1
Offside rear brake excessively fluctuating \|3.7.B.3\|	1
Offside rear parking \|secondary\| brake grabbing severely \|3.7.B.6b\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Rear rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front Macpherson strut upper support bearing is stiff in operation \|2.5.B.1b\|	1
Offside Front Macpherson strut upper support bearing is stiff in operation \|2.5.B.1b\|	1
Brake performance not tested \|3.7.A.1\|	1
Fuel system component insecure \|7.2.1\|	1
Brake cable has restricted free movement \|3.5.1k\|	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill \|7.1.1 \|a\| \|i\|\|	1
Trailer electrical socket damaged so that lead cannot be securely connected \|1.9.3b\|	1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Brake load sensing valve linkage seized \|3.6.E.3\|	1
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear reflector excessively damaged so that its function is impaired \|1.5.1c\|	1
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Steering system excessively tight \|2.2.D.1\|	1
Offside Front Ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Rear Rear wheel bearing rough when rotated \|2.6.1\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded under arch \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded rearward - inner wing panel & chassis outrigger \|2.4.A.3\|	1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded mount - inner & outer sills \|5.2.6\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded forward mount - inner sill & chassis outrigger \|2.4.A.3\|	1
Emissions not tested overheating \|7.3.A.1\|	1
Nearside Side repeater not working \|1.4.A.2c\|	1
Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Exhaust emits excessive smoke or vapour of any colour \|7.4.B.4\|	1
Offside Front Direction indicator incorrect colour Lens missing \|4.4.3 \|a\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL PANEL/INNER WHEEL ARCH \|5.3.6 \|a\| \|i\|\|	1
Offside Front Lower Suspension component ball joint excessively worn \|5.3.4 \|a\| \|i\|\|	1
Nearside Front Lower Suspension component ball joint excessively worn \|5.3.4 \|a\| \|i\|\|	1
Emissions not tested DUE TO EXCESSIVE EXHAUST BLOW AND ENGINE MISSFIRE \|8.2.1.2 \|d\|\|	1
Exhaust silencer insecure MOUNTINGS MISSING \|8.1.1 \|b\| \|i\|\|	1
Offside Stop lamp\|s\| not working \|4.3.1 \|a\| \|ii\|\|	1
Exhaust emissions likely to be affected by an exhaust leak \|8.2.1.1 \|b\|\|	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis and inner flitch \|6.1.1 \|c\| \|ii\|\|	1
Centre Exhaust system not adequately supported rubber mounts \|7.1.1\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength \|2.4.A.3\|	1
Offside Outer Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Brake pipe fouled by moving parts \|3.6.B.2a\|	1
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance \|1.2.1d\|	1
Nearside Front brake disc excessively scored \|3.5.1h\|	1
Offside Front brake disc excessively scored \|3.5.1h\|	1
Offside Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Nearside Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Seat belt anchorage prescribed area is excessively corroded Door sill, inner and outer \|5.2.6\|	1
Exhaust has a major leak of exhaust gases near mid silencer \|7.1.2\|	1
Power steering pipe\|s\| or hose\|s\| leaking from a joint \|2.3.3b\|	1
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Rear position lamp\|s\| incomplete \|1.1.4a\|	1
Offside Rear Rear position lamp\|s\| incomplete \|1.1.4a\|	1
Offside Rear Exhaust system insecure tailpipe \|6.1.2 \|a\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger inner wheelarch \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Service brake excessively binding \|1.2.1 \|f\|\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Rear Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Suspension component mounting prescribed area is excessively corroded in all areas marked. \|2.4.A.3\|	1
Suspension component mounting prescribed area is excessively corroded rear inner arches \|2.4.A.3\|	1
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member corroded \|6.1.1 \|c\| \|i\|\|	1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member corroded \|6.1.1 \|c\| \|i\|\|	1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch \|6.1.1 \|c\| \|i\|\|	1
Brake performance not tested \|1.2.1 \|g\|\|	1
Rear fog lamp not working \|1.3.2b\|	1
Rear fog lamp tell tale not working \|1.3.1b\|	1
Hazard warning lamps inoperative \|1.4.B.1b\|	1
Hazard warning tell tale not working correctly \|1.4.B.1e\|	1
Nearside Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Nearside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Offside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front wheel bearing rough when rotated \|2.5.A.2\|	1
Nearside Front Brake hose bulging under pressure \|3.6.B.3\|	1
Fuel cap/sealing device ineffective split sealing ring \|6.1.3 \|b\| \|i\|\|	1
Nearside Front Headlamp levelling device inoperative \|4.1.5 \|a\|\|	1
Offside Front Headlamp levelling device inoperative \|4.1.5 \|a\|\|	1
Nearside Front Position lamp not working \|4.2.1 \|a\|\|	1
Offside Front Position lamp not working \|4.2.1 \|a\|\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded rear panel corroded and holed behind shackle mounting \|2.4.A.3\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Nearside Upper Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Upper Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Steering system has excessive free play detected at the steering wheel \|steering rack fitted\| \|2.2.A.1b\|	1
Brake pedal creeps down while the pedal is held under pressure \|3.3.B.1a\|	1
Centre Brake pipe leaking \|3.6.A.1\|	1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch near engine mount \|6.1.1 \|c\| \|i\|\|	1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill \|7.1.1 \|a\| \|i\|\|	1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill \|7.1.1 \|a\| \|i\|\|	1
Nearside Rear Upper Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Offside Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength \|2.4.A.3\|	1
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Front Front constant velocity joint gaiter missing \|2.5.C.1a\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Position lamp not working \|4.2.1 \|a\|\|	1
Centre Stop lamp not working \|1.2.1b\|	1
Nearside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	1
Side repeater incomplete \|1.5.A1b\|	1
Offside Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Nearside Front Ball joint has excessive play \|2.2.B.1f\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension arm ball joint excessively worn \|5.3.4 \|a\| \|i\|\|	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch \|7.1.1 \|a\| \|i\|\|	1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch \|2.4.A.3\|	1
Nearside Rear An item not tested \|Manual\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Centre Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Rear Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Nearside Headlamp aim not tested \|1.8.A.1c\|	1
Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Rear Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Nearside Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill/bumper \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/sill \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded floor/sill \|2.4.A.3\|	1
Offside Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Nearside Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch \|2.4.A.3\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded sill \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill \|5.2.6\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill \|5.2.6\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Nearside Brake cable has wires broken and is significantly weakened \|3.5.1b\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch \|5.3.6 \|a\| \|i\|\|	1
Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Offside Front suspension has excessive play in a lower suspension ball joint and nearside front \|2.5.B.1a\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner valance \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer valance \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner and outer sill \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded inner step \|5.2.6\|	1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch \|7.1.1 \|a\| \|i\|\|	1
Outer Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Stop lamp emits other than a steady red light \|1.2.1e\|	1
Offside Front constant velocity joint gaiter insecurely mounted to its housing \|2.5.C.1a\|	1
Nearside Headlamp missing \|1.7.3\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Front Direction indicator insecure \|1.4.A.2b\|	1
Nearside Rear Rear position lamp\|s\| incomplete \|1.1.4a\|	1
Front Horn not working \|1.6.2a\|	1
Offside Windscreen wiper blade deteriorated \|8.2.2\|	1
Offside Front Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	1
Offside Front Headlamps matched pair are incorrectly positioned \|1.7.3\|	1
Nearside Body has a projection caused by damage \|6.1.C.1\|	1
Nearside Front Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Offside Front Coil spring mounting damaged and seriously weakened \|2.4.C.3c\|	1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point \|2.4.A.3\|	1
Exhaust has a major leak of exhaust gases blow manifold area \|7.1.2\|	1
Offside Bonnet retaining device insecure bonnet hinge \|8.4.2\|	1
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front Lower Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Nearside Rear Body has a sharp edge caused by damage hub cap \|6.1.C.1\|	1
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded top strut \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded top strut \|2.4.A.3\|	1
Nearside Front Brake pipe inadequately clipped \|3.6.B.1\|	1
Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Nearside Front suspension has a suspension lower ball joint securing nut loose \|2.5.B.1a\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Offside Side repeater missing \|1.4.A.2b\|	1
Exhaust engine idle speed too high \|7.3.D.1\|	1
Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Fuel system component leaking \|7.2.3\|	1
Centre Exhaust mounting missing \|7.1.1b\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded leaf spring front mounting \|2.4.A.3\|	1
Front Subframe mounting prescribed area is excessively corroded o/s/r mounting point \|2.4.A.3\|	1
Nearside Front Seat belt insecurely fixed to the seat stalk \|5.2.1a\|	1
Front Exhaust mounting missing \|7.1.1b\|	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis (5.3.6 (a) (i))	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/chassis (5.3.6 (a) (i))	1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mid sill (5.3.6 (a) (i))	1
Offside Front Direction indicator incorrect colour (4.4.3 (a))	1
Offside Rear Direction indicator incorrect colour (4.4.3 (a))	1
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))	1
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	1
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))	1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step plate (6.2.2 (d) (i))	1
Nearside Front Direction indicator incorrect colour (4.4.3 (a))	1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))	1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under the bonnet nsr inner wheel arch and inner sill has hole (6.2.2 (d) (i))	1
Front Exhaust system not adequately supported (7.1.1)	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))	1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))	1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))	1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))	1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))	1
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill at rear marked in pink (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill marked in pink (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill/step marked in pink (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/arch marked in pink (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/arch marked in pink (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear marked in pink (5.3.6 (a) (i))	1
Rear Exhaust system insecure (6.1.2 (a))	1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced At jacking point within 30 cm of sub frame mount. (6.1.1 (c) (i))	1
Horn not working (7.7 (a) (ii))	1
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Rear Seat belt missing seat belt sturk (7.1.2 (a))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))	1
Power steering pipe/hose leaking pipes on rack (2.1.5 (a))	1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting point on nearside (5.3.6 (a) (i))	1
All direction indicators adversely affected by the operation of another lamp work intermittently (4.4.3 (b))	1
Hazard warning lamps inoperative (4.4.1 (e))	1
Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b))	1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to jacking point (6.2.2 (d) (i))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to rear leaf spring mounting (6.2.2 (d) (i))	1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength by spring mount (5.3.6 (a) (i))	1
Central Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength by spring mount (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength by subframe mount (5.3.6 (a) (i))	1
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Nearside Front Position lamp not working (4.2.1 (a) (ii))	1
Fuel cap/sealing device missing cap (6.1.3 (b) (i))	1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))	1
Emissions not tested unable to maintain constant engine speed (8.2.1.2 (d))	1
Front Service brake excessively fluctuating (1.2.1 (e))	1
Nearside Rear Valve stem seriously damaged (5.2.3 (j))	1
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill/ cross member (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))	1
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area is inadequately repaired inner wing (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired chassis by spring hanger (5.3.6 (a) (i))	1
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))	1
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))	1
Central Exhaust system insecure (6.1.2 (a))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (NEAR WISHBONE MOUNTING) (5.3.6 (a) (i))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing /chassis rail (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))	1
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))	1
Central Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))	1
Horn sound not in accordance with requirements (7.7 (c))	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch in two areas (5.3.6 (a) (i))	1
Bonnet primary retaining device ineffective (3.1 (c))	1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting drivers step (6.2.2 (d) (i))	1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))	1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting passengers step (6.2.2 (d) (i))	1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))	1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))	1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i))	1
Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i))	1
Brake performance not tested (1.2.1 (g))	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING X2 (5.3.6 (a) (i))	1
Exhaust has a major leak of exhaust gases silencer corroded, holed & blowing (6.1.2 (a))	1
Nearside Rear Service brake excessively binding (1.2.1 (f))	1
Nearside Front Shock absorbers has a serious fluid leak	1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/ suspension turret corroded & holed (6.1.1 (c) (i))	1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch/suspension turret corroded & holed (6.1.1 (c) (i))	1
Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))	1
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))	1
Horn sound not in accordance with requirements to quiet (7.7 (c))	1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced next to radiator cross member (6.1.1 (c) (i))	1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill not attached to inner sill (6.1.1 (c) (i))	1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))	1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed within 30cm of leaf spring mounting (6.1.1 (c) (i))	1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))	1
Emissions not tested can damage equipment (8.2.1.2 (d))	1
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength yellow marked (5.3.6 (a) (i))	1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sills (5.3.6 (a) (i))	1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sills (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring, rear mounting (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring, rear mounting (5.3.6 (a) (i))	1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside,rear mounting (5.3.6 (a) (i))	1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength offside,rear mounting (5.3.6 (a) (i))	1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering subframe mount area (6.1.1 (c) (ii))	1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering subframe mount area (6.1.1 (c) (ii))	1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear spring hanger area (5.3.6 (a) (ii))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear arch (5.3.6 (a) (i))	1
Offside Front Service brake excessively fluctuating (1.2.1 (e))	1
Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))	1
Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))	1
Offside Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Nearside Side repeater not working (4.4.1 (a) (ii))	1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Offside Front Brake pipe leaking on a hydraulic braking system by inner wing (pipe chalked) (1.1.11 (b) (ii))	1
Brake pedal has insufficient reserve travel travels to floor!!! pipe split (1.1.2 (a))	1
Brake performance unable to be tested due to pipe failure (1.2.1 (g))	1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded & holed (6.1.1 (c) (i))	1
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt gaiter split (6.1.7 (g) (ii))	1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))	1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))	1
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))	1
Offside Rear fog lamp not working (4.5.1 (a) (ii))	1
Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to subframe, both sides (6.2.2 (d) (i))	1
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))	1
Offside Rear Outline marker lamp not working (4.2.1 (a) (ii))	1
Exhaust system insecure (6.1.2 (a))	1
Offside Rear Upper Position lamp not working (4.2.1 (a) (ii))	1
Nearside Rear Upper Position lamp missing (4.2.1 (a) (ii))	1
Nearside Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))	1
Nearside Rear Service brake lagging in operation (1.2.1 (d))	1
Offside Rear Service brake excessively binding (1.2.1 (f))	1
Nearside Integral body structure has excessive corrosion which adversely affects braking or steering whole step area (6.1.1 (c) (ii))	1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering whole step area (6.1.1 (c) (ii))	1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering bulk head (6.1.1 (c) (ii))	1
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))	1
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheelarch (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section (5.3.6 (a) (i))	1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside rear innner sill (5.3.6 (a) (i))	1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear inner sill (5.3.6 (a) (i))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))	1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))	1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Power steering pipe/hose leaking (2.1.5 (a))	1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis front of spring (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear of spring (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i))	1
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Offside Front Side repeater not working (4.4.1 (a) (ii))	1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired wing (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))	1
Brake hose damaged	1
Rear fog lamp not working (4.5.1 (a) (ii))	1
Offside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and outrigger (5.3.6 (a) (i))	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and outrigger (5.3.6 (a) (i))	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))	1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis central mounting point (5.3.6 (a) (i))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis central mounting point (5.3.6 (a) (i))	1
Emissions unable to be completed engine over heating (8.2.1.2 (d))	1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))	1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))	1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))	1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

MOT History from tests of petrol FIAT DUCATOs year 1999

Find us on Facebook