Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 8 |
Registration plate lamp issues | 7 |
Headlamp aim out of alignment | 5 |
Windscreen wiper blade insecure | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Rear brake binding | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp aim projected beam image is obviously incorrect left hand drive kickup (4.1.2 (c)) | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Seat belt buckle missing (7.1.2 (d)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing support panel holed (5.3.6 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced panel under step holed and corroded (7.1.1 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced panel under step holed and corroded (7.1.1 (a) (i)) | 1 |
Nearside Obligatory mirror missing (3.3 (a)) | 1 |
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting area (5.3.6 (a) (i)) | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Seat belt not functioning as intended not returning properly and fully (7.1.2 (c)) | 1 |
Offside Stop lamp|s| not working high leval lamp also not working |4.3.1 |a| |ii|| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear Leaf spring fractured |2.4.B.1a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brake pipe excessively corroded | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door step |6.1.B.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded upper arch |2.4.A.3| | 1 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Exhaust system not adequately supported |7.1.1| | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Brake load sensing valve seized |3.6.E.3| | 1 |
Front Direction indicators incorrect colour both sides |1.4.A.2f| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp goes out when fog switched on (4.2.3 (c)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member more than 1 place (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member more than 1 place (5.3.6 (a) (i)) | 1 |
Offside Rear Towbar excessively corroded within 30cm of towbar mounting cross member more than 1 place (6.1.6 (i) (i)) | 1 |
Nearside Rear Towbar excessively corroded within 30cm of towbar mounting cross member more than 1 place (6.1.6 (i) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg more than 1 place (5.3.6 (a) (i)) | 1 |
Fuel system component leaking |7.2.3| | 1 |
Rear Direction indicators incorrect colour both sides |1.4.A.2f| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS OUTRIGGER (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL X 2 (5.3.6 (a) (i)) | 1 |
Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL TO CROSSMEMBER (6.1.1 (c) (i)) | 1 |
Nearside Front All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Offside Front All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Nearside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Offside Rear All direction indicators incorrect colour (4.4.3 (a)) | 1 |