| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 26 |
| Windscreen wiper does not clear the windscreen effectively | 14 |
| Headlamp aim out of alignment | 13 |
| Registration plate lamp issues | 10 |
| Horn not working |1.6.2a| | 9 |
| Windscreen has damage | 3 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Rear fog lamp tell tale not working |1.3.1b| | 3 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Offside Front Side repeater not working |1.4.A.2c| | 2 |
| Exhaust system not adequately supported |7.1.1| | 2 |
| Headlamp switch faulty |1.7.1| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point area (6.1.1 (c) (i)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i)) | 1 |
| Position lamp not working n/s rear (4.2.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam n/s front (4.1.1 (a) (ii)) | 1 |
| Offside Front All outline marker lamps not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear All outline marker lamps not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Steering column shaft has excessive end float |2.1.3| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Upper Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear Outline marker lamp lens seriously defective |4.2.1 |b|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis outrigger/jacking point (6.1.1 (c) (i)) | 1 |
| Nearside Lower Shock absorber insecure |2.7.2b| | 1 |
| Nearside Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Side repeater not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i)) | 1 |
| Nearside Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Rear reflector missing |1.5.1a| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around strutt top (5.3.6 (a) (i)) | 1 |
| Vehicle Identification Number has more than one different number displayed |6.3.5.b| | 1 |
| Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Offside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower radiator support (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Headlamp not working on main beam poor connection (4.1.1 (a) (ii)) | 1 |
| Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Centre Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Windscreen washer not working | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength STEP SUBFRAME MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SUBFRAME MOUNT (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases BOTH SILENCER BOXES CORRODED (6.1.2 (a)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 2.41 (8.2.2.2 (a)) | 1 |
| Fuel pipe leaking LEAK OFF PIPE AT FUEL PUMP (6.1.3 (b) (i)) | 1 |
| Central Exhaust system not adequately supported |7.1.1| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Front Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Exhaust system not adequately supported missing rubber mount & very perished rubber mount |7.1.1| | 1 |
| Offside Front Brake pipe leaking |3.6.A.1| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Offside Upper Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired side panel (7.1.1 (a) (i)) | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Emissions not tested Cambelt due for replacement (8.2.2.2 (e)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired step panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired step panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Power steering pipe/hose leaking metal pipes on rack (2.1.5 (a)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger and inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wlng (5.3.6 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |