Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 6 |
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Rear fog lamp tell tale not working |1.3.1b| | 3 |
Registration plate lamp issues | 2 |
Rear brake binding | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Offside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Nearside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
Offside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear fog lamp does not face the rear (4.5.4 (a)) | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Rear brake application uneven | 1 |
Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Brakes imbalanced across an axle | 1 |
Emissions not tested |7.0| | 1 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and inner (7.1.1 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Brake cable has restricted free movement |3.5.1k| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Battery insecure |1.9.1| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Floor excessively deteriorated around handbrake mount (6.2.4 (a) (i)) | 1 |
Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Registration plate issues | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Brake servo inoperative Suspect vacuum pipe not connected. (1.1.10 (a) (ii)) | 1 |
Headlamp aim projected beam image is obviously incorrect Nearside and offside both dip wrong way. (4.1.2 (c)) | 1 |
Exhaust system insecure Two mounting rubbers missing. (6.1.2 (a)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |