Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 9 |
Brake pipe excessively corroded | 7 |
Brakes imbalanced across an axle | 3 |
Offside Stop lamp not working (1.2.1b) | 2 |
Nearside Stop lamp not working (1.2.1b) | 2 |
Registration plate issues | 2 |
Windscreen washer not working | 2 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Horn not working |1.6.2a| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Xmember (6.1.1 (c) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Exhaust system not adequately supported (7.1.1) | 1 |
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill/step (5.2.6) | 1 |
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill/step (2.4.A.3) | 1 |
Brake cable has restricted free movement (3.5.1k) | 1 |
Rear fog lamp not working (1.3.2b) | 1 |
Stop lamp not working (1.2.1b) | 1 |
Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
Rear Stop lamp has less than 50% of the light sources illuminating high level brake light (1.2.1b) | 1 |
Nearside Front Direction indicators incorrect colour (1.4.A.2f) | 1 |
Offside Front Direction indicators incorrect colour (1.4.A.2f) | 1 |
Headlamp switch faulty when putting main beam on (1.7.1) | 1 |
Steering system excessively tight (2.2.D.1) | 1 |
Power steering fluid level below minimum reservoir empty (2.3.1) | 1 |
Power steering pipe(s) or hose(s) leaking pipes fitted to rack (2.3.3b) | 1 |
Fuel system component leaking at fuel pump (7.2.3) | 1 |
Rear Brake load sensing valve seized (3.6.E.3) | 1 |
Nearside Front Front wheel bearing has excessive play (2.5.A.3c) | 1 |
Offside Front Front wheel bearing has excessive play (2.5.A.3c) | 1 |
Nearside Rear Direction indicator not working (1.4.A.2c) | 1 |
Front Exhaust mounting missing (7.1.1b) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear Direction indicator incorrect colour both sides (4.4.3 (a)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
Nearside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3) | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
Offside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded / holed (strut turret (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded / holed (strut turret (5.3.6 (a) (i)) | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded strut top (2.4.A.3) | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded top suspension mounting (2.4.A.3) | 1 |
Service brake: efficiency below requirements (3.7.B.7) | 1 |
Front Horn not working (1.6.2a) | 1 |
Headlamp aim out of alignment | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength arch and jacking mount (5.3.6 (a) (i)) | 1 |
Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii)) | 1 |
Offside Front Brake pipe likely to become detached or damaged inner arch (1.1.11 (d) (ii)) | 1 |
Brake performance not tested due to front suspension (1.2.1 (g)) | 1 |
Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of wheel (6.1.1 (c) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel (6.1.1 (c) (i)) | 1 |
Rear Lower Spare wheel likely to become detached (6.1.5 (b) (ii)) | 1 |
Front Service brake excessively fluctuating both (1.2.1 (e)) | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Position lamp adversely affected by the operation of another lamp when indicator is on (4.2.3 (c)) | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Front Sub-frame corroded and seriously weakened by steering rack (5.3.3 (b) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |