MOT History from tests of electric FIAT 126s year 1988

Review the list of common FIAT 126 failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a electric FIAT 126 year 1988 passes without issue)

Based on:12 MOT Tests

Most common failures	No# failures
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Horn not working \|1.6.2a\|	2
Brake pipe excessively corroded	2
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	2
Nearside Headlamp insecure \|1.7.3\|	1
Offside Headlamp insecure \|1.7.3\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Rear fog lamp not working \|1.3.2b\|	1
Registration plate lamp issues	1
Hazard warning lamps inoperative \|1.4.B.1b\|	1
Nearside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Front Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Windscreen wiper not operating over a large enough area to give an adequate view \|8.2.1c\|	1
Offside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.4.G.4e\|	1
Nearside Rear An item not tested \|Manual\|	1
Rear brake binding	1
Nearside front brake binding \|3.7.B.1\|	1
Nearside Front An item not tested \|Manual\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Rear brake application uneven	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Brakes imbalanced across an axle	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Horn not working \|1.6.2a\|	2
Brake pipe excessively corroded	2
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	2
Nearside Headlamp insecure \|1.7.3\|	1
Offside Headlamp insecure \|1.7.3\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Rear fog lamp not working \|1.3.2b\|	1
Registration plate lamp issues	1
Hazard warning lamps inoperative \|1.4.B.1b\|	1
Nearside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Front Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Windscreen wiper not operating over a large enough area to give an adequate view \|8.2.1c\|	1
Offside Rear Drive shaft which forms part of the suspension coupling gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.4.G.4e\|	1
Nearside Rear An item not tested \|Manual\|	1
Rear brake binding	1
Nearside front brake binding \|3.7.B.1\|	1
Nearside Front An item not tested \|Manual\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering \|2.5.A.3a\|	1
Nearside Side repeater incorrect colour \|1.4.A.2f\|	1
Rear brake application uneven	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Brakes imbalanced across an axle	1

MOT History from tests of electric FIAT 126s year 1988

Find us on Facebook