| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Brake hose excessively deteriorated | 6 |
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Registration plate issues | 3 |
| Rear brake binding | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Nearside Front Brake pipe likely to become detached or damaged flexi hose not fitted correctly |1.1.11 |d| |ii|| | 1 |
| Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
| Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front coil spring fractured |2.4.C.1a| | 1 |
| Emissions not tested |7.0| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/floor corroded at rear,in front of rear wheel. |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis/floor corroded at rear,in front of rear wheel. |6.1.B.2| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has corroded at rear. |6.1.B.2| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside Rear Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Brake pedal has no servo assistance |3.3.B.2| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Exhaust mounting missing |7.1.1b| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Upper Brake hose bulging under pressure |3.6.B.3| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp go out when headlamps applied |1.1.A.3f| | 1 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
| Headlamp aim beam image obviously incorrect offside and nearside |1.8.A.1b| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Parking brake lever releases when knocked |3.1.6a| | 1 |
| Nearside Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Registration plate lamp issues | 1 |
| Front Side repeater not working |1.4.A.2c| | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Offside Brake pipe inadequately supported front to rear brake pipes |x2| |3.6.B.1| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger holes |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger holes |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Emissions not tested |7.3.A.1| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Front Headlamp aim not tested head lamp motor up and down faults |1.8.A.1c| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |