MOT History from tests of petrol FERRARI 250s year 1962

Review the list of common FERRARI 250 failures below or to perform a specific mot history check on your FERRARI then use our popular KnowYourCar service

mot history

Pass percent:90.40%

(The average a petrol FERRARI 250 year 1962 passes without issue)

Based on:125 MOT Tests

Most common failures	No# failures
Rear parking brake recording little or no effort	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Horn not working \|1.6.2a\|	2
Mechanical brake component has restricted free movement	2
Nearside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Front Direction indicator flashing less than 60 times a minute \|1.4.A.2g\|	1
Nearside Direction indicator not working \|1.4.A.2c\|	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Nearside Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Registration plate lamp issues	1
Nearside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Rear Mechanical brake component has restricted free movement	1
Brake performance not tested \|3.7.A.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.D.4\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Parking brake efficiency below requirements \|1.4.2 \|a\| \|i\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Parking brake efficiency less than 50% of the required value \|1.4.2 \|a\| \|ii\|\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Brake performance not tested brake bind \|3.7.A.1\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear parking brake recording little or no effort	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Horn not working \|1.6.2a\|	2
Mechanical brake component has restricted free movement	2
Nearside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Front Direction indicators not working \|1.4.A.2c\|	1
Offside Front Direction indicator flashing less than 60 times a minute \|1.4.A.2g\|	1
Nearside Direction indicator not working \|1.4.A.2c\|	1
Indicator tell tale inoperative \|1.4.A.2a\|	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp aim not tested \|1.8.A.1c\|	1
Nearside Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Registration plate lamp issues	1
Nearside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Seat belt insecurely fixed to the vehicles structure \|5.2.1a\|	1
Rear Mechanical brake component has restricted free movement	1
Brake performance not tested \|3.7.A.1\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.D.4\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Parking brake efficiency below requirements \|1.4.2 \|a\| \|i\|\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Parking brake efficiency less than 50% of the required value \|1.4.2 \|a\| \|ii\|\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Offside Front Brake performance not tested brake bind \|3.7.A.1\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1

MOT History from tests of petrol FERRARI 250s year 1962

Find us on Facebook