Most common failures | No# failures |
---|
Registration plate issues | 8 |
Horn not working |1.7.3a| | 5 |
Headlamp aim out of alignment | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Fuel system component leaking |7.2.1a| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Horn control not readily accesible. |1.7.2a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp missing |1.2.3a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Brake hose damaged | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Position lamp missing |4.2.1 |a|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Steering lock stop missing |2.1.3| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake has no recorded effort at a wheel front brake (1.2.1 (a) (ii)) | 1 |
Brake effort inadequate at a wheel front brake (1.2.1 (a) (i)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |