Most common failures | No# failures |
---|
Registration plate lamp issues | 58 |
Headlamp aim out of alignment | 34 |
Registration plate issues | 30 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 11 |
Rear reflector missing (4.8.2 (a) (ii)) | 10 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 8 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 7 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Stop lamp remains on when the brakes are released | 4 |
Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 4 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Hydraulic brake control feels spongy |3.1.4a| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working (7.7 (a)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Brake performance not tested |3.3| | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Steering operation restricted in free movement from lock to lock Wires from Sat Nav restricting movement (2.1.4 (c)) | 1 |
Nearside Headlamp not working on dipped beam N/S dipped beam not working (4.1.1 (a) (ii)) | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition has been drilled |7.1.2| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort brake works when pumped up |3.3.A1c| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Rear Brake lagging in operation Air in system (1.2.1 (d)) | 1 |
Brake component is fractured Rear brake return spring broken |3.1.5| | 1 |
Headlamp incorrect colour (4.1.4 (a)) | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Footrest missing passenger footrests missing (6.2.12 (a)) | 1 |
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Steering lock stop ineffective on rhs lock... hitting |2.1.3| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake lagging in operation system slow in reacting |1.2.1 |d|| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Shock absorber has a serious fluid leak front n.s. forkseal leaking (5.3.2 (b)) | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Front Shock absorber has a serious fluid leak Front O/S fork seal leaking oil |5.3.2 |b|| | 1 |
Nearside Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Central Rear Outer Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Drive chain horseshoe locking device likely to become detached rivet type fitted,not been peened over properly (6.1.7 (j) (ii)) | 1 |
Rear All position lamps not working |4.2.1 |a|| | 1 |
Rear Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on reg plate |1.1.3a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake cylinder has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on Number Plate |1.1.3a| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Brake pedal has insufficient reserve travel spongy, bottoms out |1.1.2 |a|| | 1 |
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Front Shock absorber has a serious fluid leak left and right fork seals leaking |5.3.2 |b|| | 1 |
Offside Rear Footrest missing rear peg missing |6.2.12 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel TOO MUCH TRAVEL NO EFFORT (1.2.1 (a) (i)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Horn not working |1.7.3a| | 1 |
Nearside Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Horn not working |1.7.3a| | 1 |
Rear reflector on motorcycle missing new fitted |1.4.1| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Front Footrest insecure |6.2.12 |a|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |