| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 17 |
| Registration plate issues | 16 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Horn not working |1.7.3a| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Registration plate lamp issues | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Rear Brake locking device missing clevis pin connecting brake pedal to slave cylinder missing |3.2.A1e| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Offside Steering lock stop maladjusted Handlebars contacting fuel tank on righthand lock.[Lock stop adjusted during test.] |2.1.3| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Central Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Horn not working button sticking (7.7 (a) (ii)) | 1 |
| Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Nearside Footrest insecure |6.2.12 |a|| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls FRONT SWITCH FAILED (4.3.2 (a) (iii)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators affected by the operation of another lamp position and stop light |1.5.1c| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Stop lamp affected by the operation of another lamp position lamp |1.3.2| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Vehicle identification number not permanently displayed |6.3.5a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Drive chain sprocket worn to excess both and rear sprocket cracked |6.2.1e| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Engine mounting/bracket fractured Bolt fixing (6.1.8 (a) (ii)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |