Most common failures | No# failures |
---|
Registration plate issues | 31 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 29 |
Rear reflector missing (4.8.2 (a) (ii)) | 29 |
Registration plate lamp issues | 18 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 11 |
Rear reflector missing |4.8.2 |a| |ii|| | 11 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 9 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 8 |
Headlamp aim out of alignment | 7 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 5 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 5 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 4 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 4 |
Stop lamp remains on when the brakes are released | 4 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 4 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 4 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 3 |
Rear Brake caliper operating mechanism has excessive travel (1.1.16 (e) (i)) | 2 |
Rear Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Rear Brake pedal pivot has excessive free play (1.1.1 (b)) | 1 |
Nearside Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Offside Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear All direction indicators obviously incorrectly positioned mounted 100mm apart (4.4.3 (a)) | 1 |
Rear Stop lamp missing |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Brake lagging in operation |1.2.1 |d|| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Brake pedal has insufficient reserve travel Rear |1.1.2 |a|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Upper Exhaust markings indicating not for road use or similar wording for race use only |6.1.2 |c|| | 1 |
Lower Exhaust markings indicating not for road use or similar wording for race use only |6.1.2 |c|| | 1 |
Rear Brake caliper operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Brake performance not tested Rear brake inoperative (1.2.1 (g)) | 1 |
Brake pedal has insufficient reserve travel catching on exhaust |1.1.2 |a|| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Brake caliper operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Rear Brake pedal has insufficient reserve travel spongy and no lock and didnt meet the minimum requirement on roller brake test (1.1.2 (a)) | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Brake pedal has insufficient reserve travel needs pumping to get correct opperation (1.1.2 (a)) | 1 |
Lower Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Nearside Front Shock absorber has a serious fluid leak front fork seal leaking (5.3.2 (b)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i)) | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake component modification unsafe Disc rubbing caliper (1.1.21 (d) (i)) | 1 |
Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
Exhaust markings indicating not for road use or similar wording race use only |6.1.2 |c|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working rear brake light not working |4.3.1 |a| |ii|| | 1 |
Rear reflector missing had tape (4.8.2 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel Rear brake spongy (1.1.2 (a)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
Throttle operating incorrectly Grip Turns On Throttle (6.2.7 (a) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Grip insecure - spins on throttle tube (6.2.7 (a) (ii)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Exhaust markings indicating not for road use or similar wording rear cans state race use only (6.1.2 (c)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear reflector missing Fitted new reflector (4.8.2 (a) (ii)) | 1 |
Central Rear Upper Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |