Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock revs increase on lh lock |2.1.4| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Registration plate issues | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Central Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Inner Rear Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Outer Front Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working front brake applied |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working rear brake applied |4.3.1 |a| |ii|| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released foot operated |1.3.1e| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Registration plate lamp issues | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Stop lamp insecure (1.3.3b) | 1 |
Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |