Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 22 |
Headlamp aim out of alignment | 17 |
Registration plate issues | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Registration plate lamp issues | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Motorcycle structure cracked |6.1.1a| | 1 |
Lower Fork yoke deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Stop lamp does not illuminate immediately a brake applies from front brake and rear brake |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Floor brake test indicates a binding brake |Unable to test front wheel bearings| |3.3.C2c| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Upper Fork yoke fractured |2.2.2 |d| |i|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Exhaust markings indicating not for road use or similar wording (7.1.4) | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |