Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Registration plate issues | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Horn not working |1.7.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Registration plate lamp issues | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Offside Front Lower Footrest insecure e clip missing from footrest retaining pivot pin. (6.2.12 (a)) | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Stop lamp does not illuminate immediately a brake applies handbrake |1.3.1a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Outer Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Outer Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp not working lever operation (4.3.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Brake disc significantly and obviously worn rotor bobbins (1.1.14 (a) (i)) | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Lower Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc|s| insecure x 2 |3.2.A1g| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |