MOT History from tests of petrol DUCATI 907s year 1991

Review the list of common DUCATI 907 failures below or to perform a specific mot history check on your DUCATI then use our popular KnowYourCar service

mot history

Pass percent:85.71%

(The average a petrol DUCATI 907 year 1991 passes without issue)

Based on:182 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Registration plate issues	2
Upper Steering headbearing has excessive free play \|2.2.2\|	1
Front Lower Steering headbearing has excessive free play \|2.2.2\|	1
Drive chain excessively tight \|6.2.1d\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Steering headbearing has excessive wear or free play Free olay present. (2.2.2 (f) (i))	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	1
Centre Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Riders seat insecure \|6.2.1a\|	1
Seat insecure \|6.2.1a\|	1
Centre Front Riders seat insecure \|6.2.1a\|	1
Centre Front Motorcycle structure adversely modified \|6.1.1b\|	1
Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1
Offside Front Brake caliper insecurely mounted and braking performance affected \|1.1.16 \|c\| \|ii\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front All direction indicators not working (4.4.1 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp aim beam image kick up to the offside \|1.6\|	2
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Registration plate issues	2
Upper Steering headbearing has excessive free play \|2.2.2\|	1
Front Lower Steering headbearing has excessive free play \|2.2.2\|	1
Drive chain excessively tight \|6.2.1d\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Steering headbearing has excessive wear or free play Free olay present. (2.2.2 (f) (i))	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	1
Centre Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Riders seat insecure \|6.2.1a\|	1
Seat insecure \|6.2.1a\|	1
Centre Front Riders seat insecure \|6.2.1a\|	1
Centre Front Motorcycle structure adversely modified \|6.1.1b\|	1
Shock absorber has negligible damping effect \|5.3.2 \|b\|\|	1
Offside Front Brake caliper insecurely mounted and braking performance affected \|1.1.16 \|c\| \|ii\|\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Offside Front Direction indicator not working \|1.5.1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Front All direction indicators not working (4.4.1 (a) (ii))	1

MOT History from tests of petrol DUCATI 907s year 1991

Find us on Facebook