| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 18 |
| Registration plate issues | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Position lamp not working (4.2.1 (a)) | 2 |
| Horn not working |1.7.3a| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp not working with front control (4.3.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Offside Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear An item not tested |Manual| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Brake pedal anti-slip provision missing |1.1.2 |c|| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level Sight glass leaking (1.1.10 (d) (ii)) | 1 |
| Rear Brake hose leaking copper washers incorrectly fitted (1.1.12 (c)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake pedal attachment screws loose |3.1.2b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Stop lamp not working On application of front brake control |4.3.1 |a| |ii|| | 1 |
| Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear suspension component misaligned |2.4.A.1a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Central Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Suspension component pin or bush excessively worn Swingarm pivot bearing worn to side to side motion (5.3.4 (a) (i)) | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |