Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp aim out of alignment | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Registration plate issues | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
An item not tested |Manual| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Upper Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls front brake light switch not working (4.3.2 (a) (iii)) | 1 |
Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Brake hose excessively deteriorated | 1 |
Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Seat insecure |6.2.1a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Nearside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Centre Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Outer Rear Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Lower Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |