MOT History from tests of petrol DINLI 801s year 2010

Review the list of common DINLI 801 failures below or to perform a specific mot history check on your DINLI then use our popular KnowYourCar service

mot history

Pass percent:72.92%

(The average a petrol DINLI 801 year 2010 passes without issue)

Based on:48 MOT Tests

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Offside Brake pedal spongy \|3.3.B.1b\|	1
Stop lamp not working \|1.2.1b\|	1
Horn not working \|1.6.2a\|	1
Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Parking brake not fitted on at least two wheels \|3.1.1\|	1
Front position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Nearside Outer Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Inner Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Position lamp not working (4.2.1 (a) (ii))	1
Obligatory mirror missing (3.3 (a))	1
Centre Stop lamp not working \|1.2.1b\|	1
Offside Brake lever has inadequate reserve travel \|9.3.1f\|	1
Brake cable has restricted free movement \|3.5.1k\|	1
Stop lamp remains on when the brakes are released	1
Front Brake lining\|s\| less than 1.5 mm thick \|3.5.1g\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Centre Headlamp not working on dipped beam \|1.7.5a\|	1
Centre Headlamp not working on main beam \|1.7.5a\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Service brake efficiency below requirements (1.2.2 (a) (i))	1
Offside Front Lower Suspension component ball joint excessively worn \|5.3.4 \|a\| \|i\|\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Front Position lamp not working (4.2.1 (a) (ii))	1
Rear Parking brake efficiency below requirements \|3.7.C.1b\|	1
Trikes, quads or pre-68 vehicles, service brake efficiency below requirements \|3.7.C.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	3
Headlamp aim out of alignment	2
Offside Brake pedal spongy \|3.3.B.1b\|	1
Stop lamp not working \|1.2.1b\|	1
Horn not working \|1.6.2a\|	1
Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Parking brake not fitted on at least two wheels \|3.1.1\|	1
Front position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Nearside Outer Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Inner Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Position lamp not working (4.2.1 (a) (ii))	1
Obligatory mirror missing (3.3 (a))	1
Centre Stop lamp not working \|1.2.1b\|	1
Offside Brake lever has inadequate reserve travel \|9.3.1f\|	1
Brake cable has restricted free movement \|3.5.1k\|	1
Stop lamp remains on when the brakes are released	1
Front Brake lining\|s\| less than 1.5 mm thick \|3.5.1g\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Centre Headlamp not working on dipped beam \|1.7.5a\|	1
Centre Headlamp not working on main beam \|1.7.5a\|	1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))	1
Service brake efficiency below requirements (1.2.2 (a) (i))	1
Offside Front Lower Suspension component ball joint excessively worn \|5.3.4 \|a\| \|i\|\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Front Position lamp not working (4.2.1 (a) (ii))	1
Rear Parking brake efficiency below requirements \|3.7.C.1b\|	1
Trikes, quads or pre-68 vehicles, service brake efficiency below requirements \|3.7.C.1a\|	1

MOT History from tests of petrol DINLI 801s year 2010

Find us on Facebook