Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 41 |
Headlamp aim out of alignment | 37 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 26 |
Drive chain excessively loose |6.2.1d| | 24 |
Drive chain worn to excess |6.2.1e| | 24 |
Registration plate issues | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not working |1.7.3a| | 9 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Handlebar deformed |2.1.1b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear reflector missing (4.8.2 (a) (ii)) | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Drive chain sprocket worn to excess |6.2.1e| | 5 |
Drive chain excessively loose (6.1.7 (c) (i)) | 5 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Registration plate lamp issues | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Offside Rear Direction indicator insecure |1.5.3b| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Indicator switch defective |1.5.4| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake lever pivots excessively worn |3.1.3a| | 2 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear reflector on motorcycle obscured |1.4.2b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 2 |
Front Stop lamp missing |1.3.3a| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Direction indicator missing |1.5.1a| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Central Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
All direction indicators missing |4.4.1 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Wheel spoke excessively bent |4.2.1b| | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
Offside Rear Brake component has an inadequate repair |3.1.5| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Headlamp aim not tested headlamp insecure |1.6| | 1 |
Brake hose leaking fluid at caliper banjo bolt/sealing washer |3.2.B4| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link fitted backwards |6.2.1h| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Shock absorber has a serious fluid leak front fork seals |5.3.2 |b|| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Handlebar handgrip missing |2.1.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Wheel alignment incorrect which adversely affects the steering To LHS |2.5.1| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket locking nut loose |6.2.1h| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel excessively distorted front wheel rim out of true |5.2.2 |c| |i|| | 1 |
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Suspension component pin or bush excessively worn mono link bush worn to excess |5.3.4 |a| |i|| | 1 |
Rear Brake component has an inadequate repair BRAKE DISC |3.1.5| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim not tested low output from dipped beam |1.6| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Offside Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Throttle operating incorrectly throttle increases on right lock (6.2.7 (a) (i)) | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock steering stops missing (2.1.4 (b)) | 1 |
Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front suspension assembly component missing headstock top nut |2.3.1| | 1 |
Front suspension assembly component excessively misaligned forks |2.3.1| | 1 |
Upper Front suspension assembly component missing |2.3.1| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering headbearing has excessive free play Top stem nut loose!. |2.2.2| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Drive chain worn to excess Drive chain links seized. |6.2.1e| | 1 |
Offside Front Shock absorber insecurely attached right hand side fork mounting broken |5.3.2 |a| |i|| | 1 |
Fuel tank leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Offside Front Forks fractured and pitted |2.2.2 |d| |i|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Rear Wheel more than one fixing missing axle nuts not of locking type |5.2.1 |a| |ii|| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Fuel pipe leaking at fuel tap |7.2.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Horn not working (7.7 (a)) | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Vehicle identification number not permanently displayed |6.3.5a| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Lower Rear suspension component loose |2.4.A.1a| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Lower Drive chain fouling another component |6.2.1d| | 1 |
Nearside Rear Lower Rear suspension component cracked |2.4.A.1a| | 1 |
Offside Rear Lower Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Fuel cap leaking unable to open (6.1.3 (b) (i)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock steering stops missing>bars foul tank/panels (2.1.4 (a)) | 1 |
Rear All direction indicators obviously incorrectly positioned too close together (4.4.3 (a)) | 1 |
Rear Brake master cylinder defective but brake still operating in my opinion the master cylinder is not suitable > mounting incorrect format causing leak from filler cap (1.1.10 (b) (i)) | 1 |
Rear Brake component insecure locking nut loose on adjuster (1.1.21 (c)) | 1 |
Rear Wheel hub excessively damaged cracked >sprocket side (5.2.1 (b) (i)) | 1 |
Nearside Front Suspension attachment bracket/mounting insecure loser spindle pinch bolt missing from lower fork (5.3.3 (a) (i)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Front Headlamp aim not tested due to low beam not working (4.1.2 (b)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working stop light not working off back brake switch (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear Exhaust system insecure |6.1.2 |a|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working on front brake (4.3.1 (a) (ii)) | 1 |
Drive chain excessively loose Chain and sprocket worn. (6.1.7 (c) (i)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Front Suspension component mounting has an unsafe modification fork leg lower fiting inside out (5.3.3 (c) (i)) | 1 |
Central Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Horn missing |1.7.1| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
All direction indicators adversely affected by the operation of another lamp stop light and horn |4.4.3 |b|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear wheel bearings have excessive free play bearings loose in hub |2.4.A.2c| | 1 |
Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Direction indicator obviously incorrectly positioned too close together (4.4.3 (a)) | 1 |
Rear Shock absorber insecurely attached spring not held by locking nuts (5.3.2 (a) (i)) | 1 |
Rear Road spring mounting insecure (5.3.1 (a) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Rear Wheel has bolts/rivets missing or loose to the extent that control of the motorcycle is likely to be adversely affected spokes |5.2.2 |e| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Suspension arm pin or bush excessively worn Swinging mounting (5.3.4 (a) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Position lamp switch insecure (4.2.2 (b)) | 1 |
Offside Rear Suspension arm pin or bush excessively worn swinging arm mounting (5.3.4 (a) (i)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose upper and lower |3.2.A1j| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Brake lever insecure |3.1.2a| | 1 |
Headlamp at least one does not illuminate on main beam low engine revs. |1.2.2a|ii|| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |