Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2) | 2 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever pivots excessively worn |3.1.3a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Registration plate issues | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel spindle locking device missing both sides (5.2.1 (d)) | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Horn not working (1.7.3a) | 1 |
Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Front Hydraulic brake control feels spongy (3.1.4a) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Drive chain excessively tight (6.2.1d) | 1 |
Rear Footrest missing (6.2.1a) | 1 |
Offside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Offside Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Front Clutch lever positioned so it cannot be readily operated. (6.2.1g) | 1 |
Fairings insecure and likely to impede the steering (2.1.2e) | 1 |
Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Drive chain worn to excess (6.2.1e) | 1 |
Offside Lower Motorcycle structure cracked (6.1.1a) | 1 |
Front Floor brake test indicates a binding brake (3.3.C2c) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |