| Most common failures | No# failures |
|---|
| Rear reflector on motorcycle missing |1.4.1| | 26 |
| Headlamp aim out of alignment | 26 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
| Drive chain excessively loose |6.2.1d| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 7 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Registration plate issues | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake disc|s| securing bolt|s| missing sheared |3.2.A1g| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Rear suspension bush has excessive free play Rear dog bone linkage top and bottom. |2.4.A2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link fitted incorrectly. |6.2.1h| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Brake fluid reservoir leaking hydraulic fluid brake cylinder |3.2.B1e| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket mounting bolt loose |6.2.1h| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Brake component is severely distorted |3.1.5| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Outer Rear Upper Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Front Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Front suspension assembly component missing (2.3.1) | 1 |
| Horn not loud enough to be heard by another road user (1.7.3a) | 1 |
| Nearside Front Direction indicator not working (1.5.1c) | 1 |
| Direction indicators affected by the operation of another lamp (1.5.1c) | 1 |
| Lower Rear mono-shock pivot excessively worn (2.4.B.4) | 1 |
| Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (1.7.3a) | 1 |
| Horn control defective (1.7.2a) | 1 |
| Offside Rear Direction indicator not working (1.5.1c) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Rear Wheel spoke missing (4.2.1b) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |
| Drive chain excessively loose (6.2.1d) | 1 |
| Front Brake lever has inadequate reserve travel (3.1.3b) | 1 |
| Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) | 1 |
| Centre Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Offside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Centre Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Rear Upper Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Upper Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |