Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 14 |
Horn not working |1.7.3a| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Fairings insecure and likely to impede the steering |2.1.2e| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Registration plate issues | 4 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Rear Drive chain worn to excess |6.2.1e| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 4 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Indicator switch insecure |1.5.4| | 3 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Steering lock stop maladjusted |2.1.3| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear Chain guard insecure |6.2.1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake lever is inoperative |3.1.3c| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Stop lamp deteriorated and function impaired not bright enough |1.3.3a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Rear Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Handlebar restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Front Wheel fixing missing |single fixing| locking device |5.2.1 |a| |ii|| | 1 |
Rear Wheel fixing missing |single fixing| locking device |5.2.1 |a| |ii|| | 1 |
Forks in such a condition that steering control is adversely affected |2.2.2 |d| |ii|| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Riders seat insecure FUEL TANK LOOK A LIKE COWL INSECURE (6.2.5 (a) (ii)) | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Upper Fork yoke deformed |2.1.1b| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Offside Rear Brake master cylinder insecure (1.1.10 (c)) | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicator obscured |1.5.1a| | 1 |
Offside Front Direction indicator obscured |1.5.1a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Rear Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake performance not tested |3.3| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
An item not tested |Manual| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Upper Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |