Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Headlamp aim out of alignment | 3 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake binding | 2 |
Brakes imbalanced across an axle | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Registration plate lamp issues | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Front brake application uneven | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Rear brake application uneven | 1 |
Offside rear brake grabbing severely |3.7.A.5b| | 1 |
Indicator switch insecure |1.4.A.1| | 1 |
Nearside Rear Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear Exhaust has a part missing |7.1.1a| | 1 |
Nearside Rear Lower Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Steering system excessively rough |2.2.D.1| | 1 |
Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear brake disc excessively pitted |3.5.1h| | 1 |
Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front Horn not working |1.6.2a| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear parking brake recording little or no effort | 1 |