| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 85 |
| Headlamp aim out of alignment | 31 |
| Brake pipe excessively corroded | 20 |
| Brakes imbalanced across an axle | 14 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 13 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 12 |
| Registration plate lamp issues | 10 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 10 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 8 |
| Nearside Stop lamp not working |1.2.1b| | 8 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Offside front brake binding |3.7.B.1| | 6 |
| Emissions not tested |7.0| | 6 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Offside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 5 |
| Front brake disc in such a condition that it is seriously weakened | 5 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Mechanical brake component has restricted free movement | 5 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 4 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 4 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Registration plate issues | 3 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
| Emissions not tested (8.2.1.2 (d)) | 3 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Front brake application uneven | 3 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 2 |
| Centre Stop lamp not working |1.2.1b| | 2 |
| Offside Headlamp insecure |1.7.3| | 2 |
| Anti-lock braking system warning lamp indicates an ABS fault | 2 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Rear Exhaust system insecure (6.1.2 (a)) | 2 |
| Central Exhaust system insecure |6.1.2 |a|| | 2 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Rear Exhaust has a part missing |7.1.1a| | 2 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 2 |
| Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Rear brake application uneven | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Rear Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Exhaust has a major leak of exhaust gases centre section towards rear |6.1.2 |a|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides |6.1.1 |c| |i|| | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Front Windscreen damaged and affecting the drivers view of the road crack in swept area (3.2 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Emissions not tested |8.2.1.2 |d|| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Rear Fuel tank leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Engine MIL inoperative or indicates a malfunction EML on |8.2.1.2 |h|| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Engine MIL inoperative or indicates a malfunction EML does not illuminate (8.2.1.2 (h)) | 1 |
| Central Exhaust has a major leak of exhaust gases Corroded/holed (6.1.2 (a)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Suspension component missing Ball joint castle nut missing a split pin (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded/holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis rail, axle mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis rail/inner wheel arch, axle mounting area (5.3.6 (a) (i)) | 1 |
| Bonnet primary retaining device ineffective (3.1 (c)) | 1 |
| Emissions not tested Due to exhaust leak (8.2.1.2 (d)) | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn Inner rear bush. (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn Inner rear bush. (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear coil spring (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected coil spring (5.3.6 (a) (ii)) | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Central Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Rear brake binding | 1 |
| Central Stop lamp not working |1.2.1b| | 1 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Front Position lamp not working both side (4.2.1 (a) (ii)) | 1 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Service brake excessively binding both front brakes (1.2.1 (f)) | 1 |
| Offside Front Suspension arm pin or bush excessively worn arm , rear bush perished and pulled away from centre boss (5.3.4 (a) (i)) | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a) | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Rear Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - marked in yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Fuel hose leaking Filler pipe to tank (6.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around spring mount |5.3.6 |a| |i|| | 1 |
| Fuel hose leaking tank filler pipe (6.1.3 (b) (i)) | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability detatched |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component pin or bush excessively worn axle bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Suspension component pin or bush excessively worn axle bush |5.3.4 |a| |i|| | 1 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing chassis rail |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Central Exhaust has a major leak of exhaust gases & Rear |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Emissions not tested exhaust leaking gases (8.2.1.2 (d)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Rear Brake cable insecure | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Fuel pipe leaking fuel filler neck corroded (6.1.3 (b) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases pipe to maifold (6.1.2 (a)) | 1 |
| Nearside Rear Trailing arm has excessive play in a pin/bush AXLE |2.4.G.2| | 1 |
| Offside Rear Trailing arm has excessive play in a pin/bush AXLE |2.4.G.2| | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Fuel tank leaking main filler pipe tightened (6.1.3 (b) (i)) | 1 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis near axle fault and spring mount (6.2.2 (d) (i)) | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring upper seat (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Nearside Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Front Wheel bolt|s| loose |4.2.A.1e| | 1 |
| brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn axle bush (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Suspension component pin or bush excessively worn both rear axle mounting bushes badly deteriorated (5.3.4 (a) (i)) | 1 |
| Central Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases centre box (6.1.2 (a)) | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Nearside Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced spring mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Centre rear joint. (6.1.2 (a)) | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside front brake juddering severely |3.7.A.2b| | 1 |
| Nearside front brake juddering severely |3.7.A.2b| | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Electrical wiring insecure and connectors likely to become disconnected Battery Cable (4.11 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chssis rail @ spring (5.3.6 (a) (ii)) | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected upper spring mounting |5.3.6 |a| |ii|| | 1 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Exhaust system not adequately supported rubber broken |7.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected upper spring mounting (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |