Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 4 |
Headlamp aim out of alignment | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Registration plate issues | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Centre Front Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Offside Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Brake lagging in operation (1.2.1 (d)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Drive chain excessively loose rear sprocket |6.2.1d| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp missing |1.2.3a| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Centre Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Lower Chain guard insecure |6.2.1c| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link wrong way |6.2.1h| | 1 |