MOT History from tests of petrol CPI POPCORNs year 2002

Review the list of common CPI POPCORN failures below or to perform a specific mot history check on your CPI then use our popular KnowYourCar service

mot history

Pass percent:50.00%

(The average a petrol CPI POPCORN year 2002 passes without issue)

Based on:30 MOT Tests

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake lever cannot be applied smoothly \|3.1.3d\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension spring worn and seriously weakened \|2.3.2b\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Horn not working \|1.7.3a\|	1
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Brake hose damaged	1
Brake component damaged and seriously reduced in strength \|3.2.A1\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Brake performance not tested \|3.3\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Riders seat insecure \|6.2.1a\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Direction indicator incorrect colour \|1.5.1b\|	1
Rear Direction indicator incorrect colour \|1.5.1b\|	1
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front Fork yoke deformed \|2.1.1b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp aim out of alignment	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	3
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake lever cannot be applied smoothly \|3.1.3d\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Front suspension spring worn and seriously weakened \|2.3.2b\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Horn not working \|1.7.3a\|	1
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Front Brake caliper\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Brake hose damaged	1
Brake component damaged and seriously reduced in strength \|3.2.A1\|	1
Fuel cap sealing washer torn \|7.2.2c\|	1
Brake performance not tested \|3.3\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Riders seat insecure \|6.2.1a\|	1
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Front Direction indicator incorrect colour \|1.5.1b\|	1
Rear Direction indicator incorrect colour \|1.5.1b\|	1
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front Fork yoke deformed \|2.1.1b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Headlamp aim out of alignment	1

MOT History from tests of petrol CPI POPCORNs year 2002

Find us on Facebook