>

MOT History from tests of petrol CPI FORMULAs year 2008

Review the list of common CPI FORMULA failures below or to perform a specific mot history check on your CPI then use our popular KnowYourCar service

mot history
Pass percent:62.69%
(The average a petrol CPI FORMULA year 2008 passes without issue)
Based on:201 MOT Tests
Most common failuresNo# failures
Rear Brake lever has inadequate reserve travel |3.1.3b|11
Exhaust is leaking and excessively noisey |7.1.1b|8
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Steering headbearing has excessive free play |2.2.2|8
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Horn not working |1.7.3a|7
Rear reflector on motorcycle missing |1.4.1|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Registration plate issues5
Riders seat insecure |6.2.1a|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Headlamp aim out of alignment4
Rear wheel bearings are excessively rough |2.4.A.2c|3
Stop lamp remains on when the brake is released |1.3.1e|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Throttle operating incorrectly |6.2.1f|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Headlamp main beam affected by the operation of another lamp |1.2.2c|2
Stop lamp affected by the operation of another lamp |1.3.2|2
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|2
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c|2
Rear Stop lamp affected by the operation of another lamp |1.3.2|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Front wheel bearings are excessively rough |2.3.5b|2
Front Horn not working |1.7.3a|2
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Handlebar deformed |2.1.1b|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear Rear shock absorber insecurely mounted |2.4.A.3b|1
Rear Upper Riders seat insecure |6.2.1a|1
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Stop lamp emits other than a steady red light |1.3.1b|1
Rear position lamp incorrect colour |1.1.2b|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear wheel has a loose wheel nut|s| |4.2.3a|1
Rear Front mudguard insecure |2.3.7|1
Centre Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Centre Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Centre Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Brake lever attachment screws loose |3.1.2b|1
Rear Brake linkage excessively corroded |3.2.A1c|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Nearside Front wheel bearings have excessive free play |2.3.5b|1
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Front Brake disc|s| is excessively distorted |3.2.A1m|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Upper Steering headbearing has excessive free play |2.2.2|1
Lower Steering headbearing has excessive free play |2.2.2|1
Nearside Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front Brake lever insecure |3.1.2a|1
Front Steering headbearing has excessive free play |2.2.2|1
Front Brake caliper|s| insecure |3.2.A1j|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear Direction indicator not working |1.5.1c|1
Front position lamp incorrect colour |1.1.2a|1
Motorcycle structure excessively damaged |6.1.1a|1
Front position lamp insecure |1.1.1c|1
Direction indicators not working |1.5.1c|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Brake lever cannot be released smoothly |3.1.3d|1
Front Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Front Handlebar mounting clamp bolt loose |2.1.1a|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Handlebar mounting clamp loose |2.1.1a|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front wheel bearings have excessive free play |2.3.5b|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Horn not working |7.7 |a| |ii||1
Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Stop lamp remains on when the brakes are released1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Shock absorber has a serious fluid leak Front right fork (5.3.2 (b))1
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy