Most common failures | No# failures |
---|
Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp aim out of alignment | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear An item not tested |Manual| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |1.7.3a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fork yoke deformed |2.1.1b| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |