Most common failures | No# failures |
---|
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Horn not working |1.7.3a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp aim out of alignment | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Riders seat insecure |6.2.1a| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake lever is inoperative |3.1.3c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Rear Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Central Front Lower Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Central Front Lower Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Nearside Front Upper Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Lower Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Lower Footrest insecure |6.2.1a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Handlebar deformed to the extent that steering is affected handle bars bent down o/s and not in line with front wheel (2.2.1 (c) (ii)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake performance not tested |3.3| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front position lamp missing |1.1.1a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |